UNIT OUTLINE

UNIT OUTLINE
UNIT OUTLINE
Read this document to learn essential details about your unit. It will
also help you to get started with your studies.
BAA517
Innovation, Place & Entrepreneurship in Regions
Semester 2 2015
THIS UNIT IS BEING OFFERED IN:
HOBART
Taught by:
Dr Colin Jones
Online component commences - 13 July 2015
Face-to-face teaching dates – 17, 18 &19 September 2015
CRICOS Provider Code: 00586B
BAA517Innovation, Place & Entrepreneurship in Regions
Contents
Contact Details ........................................................................................................................................ 2
Unit Description ...................................................................................................................................... 3
Prior Knowledge &/or Skills OR Pre-Requisite Unit(s) ............................................................................ 3
Enrolment in the Unit ............................................................................................................................. 3
When does the unit commence? ............................................................................................................ 3
University of Tasmania Graduate Quality Statement ............................................................................. 3
Intended Learning Outcomes for BAA517 .............................................................................................. 4
Learning Expectations and Teaching Strategies/Approach .................................................................... 5
Learning Resources ................................................................................................................................. 5
Student Feedback via eVALUate ............................................................................................................. 7
Details of Teaching Arrangements .......................................................................................................... 8
Assessment ............................................................................................................................................. 9
Submission of Assessment Items .......................................................................................................... 11
Review of Assessment and Results ....................................................................................................... 12
Further Support and Assistance ............................................................................................................ 13
Academic Misconduct and Plagiarism .................................................................................................. 14
Study Schedule ...................................................................................................................................... 15
Contact Details
Unit Coordinator:
Dr Colin Jones
Campus:
Sandy Bay
Room Number:
111, 1 College Road
Email:
[email protected]
Phone:
62261937
Consultation:
By Appointment
2
BAA517Innovation, Place & Entrepreneurship in Regions
Unit Description
Entrepreneurship is fundamentally a social process. With in this unit you will be able to experience
this social process first-hand. This unit explores the emerging inter-relationship between innovation,
place and entrepreneurship, and specifically the roles of relationships, local knowledge in fostering
regional competitiveness and innovation. The unit examines the implications of these trends for
regional enterprise development and an entrepreneurial culture. In the context of transforming
production systems the unit explores the emerging opportunities for innovation, place and
“regionality” in regional businesses and small and medium enterprises – often characteristic of
regional Australia. A particular focus will be on the manufacturing and agrifood sectors – often key
industries in regions. The unit will explore opportunities for, and examples of, innovation in regional
development.
Prior Knowledge &/or Skills OR Pre-Requisite Unit(s)
None specified.
Enrolment in the Unit
Unless there are exceptional circumstances, students should not enrol in this unit after the end of
week two of semester, as the Tasmanian School of Business and Economics (TSBE) cannot guarantee
that:
•
•
any extra assistance will be provided by the teaching team in respect of work covered in the
period prior to enrolment; and
penalties will not be applied for late submission of any piece or pieces of assessment that were
due during this period.
When does the unit commence?
Online component commences - 13 July 2015
Face-to-face teaching dates – 17, 18 & 19 September 2015
University of Tasmania Graduate Quality Statement
The units in your course, including this unit, have been designed to cumulatively develop the
graduate qualities outlined in the University’s Graduate Quality Statement:
Our graduates are equipped and inspired to shape and respond to the opportunities and
challenges of the future as accomplished communicators, highly regarded professionals and
culturally competent citizens in local, national, and global society. Graduates acquire subject and
multidisciplinary knowledge and skills and develop critical and creative literacies and skills of
inquiry. Our graduates recognise and critically evaluate issues of social responsibility, ethical
conduct and sustainability.
3
BAA517Innovation, Place & Entrepreneurship in Regions
Intended Learning Outcomes for BAA517
INTENDED LEARNING OUTCOMES
Learning Outcome 1
Knowledge of the process and
context of entrepreneurship and
innovation in your local region.
RELATED ASSESSMENT CRITERIA OR MODULE LEVEL
LEARNING OBJECTIVES
1a. Ability to develop your ideas using the concepts and
theories related to the environmental interaction
framework.
1b. Ability to present your ideas using the concepts and
theories related to the environmental interaction
framework.
1c. Ability to refine your ideas using the concepts and
theories related to the environmental interaction
framework.
Learning Outcome 3
Knowledge of social media tools
and how they can be used to
further your entrepreneurial
ideas.
Learning Outcome 4
Knowledge of own ability to cope
with failure and ambiguity
ASSESSMENT
METHODS
Idea Development
Process
Idea Presentation
Action Plan
Idea Development
process
Learning Outcome 2
Knowledge of the factors that
influence your ability to engage in
entrepreneurial projects in your
region.
4
1d. Ability to identify those factors that most matter to the
develop your ideas using the concepts and theories related
to the environmental interaction framework.
2a. Your ability to explain your use of appropriate social
media tools to communicate and support your
entrepreneurial idea.
2b. Your ability to explain the strategic use of social media to
advance the development of your entrepreneurial idea.
4a. Your ability to reflect upon and make sense of yours and
others’ feelings.
Idea Presentation
Action Plan
Idea Presentation
Action Plan
Group Sense Making
Action Plan
COURSE LEVEL LEARNING OUTCOMES
Successful completion of this unit
supports your development of course
learning outcomes, which describe what
a graduate of a course knows,
understands and is able to do. Course
learning outcomes are available from the
Course Coordinator. Course learning
outcomes are developed with reference
to national discipline standards,
Australian Qualifications Framework
(AQF), any professional accreditation
requirements and the University of
Tasmania’s Graduate Quality Statement.
BAA517Innovation, Place & Entrepreneurship in Regions
Learning Expectations and Teaching Strategies/Approach
The University is committed to a high standard of professional conduct in all activities, and holds its
commitment and responsibilities to its students as being of paramount importance. Likewise, it
holds expectations about the responsibilities students have as they pursue their studies within the
special environment the University offers. The University’s Code of Conduct for Teaching and
Learning states:
Students are expected to participate actively and positively in the teaching/learning
environment. They must attend classes when and as required, strive to maintain steady
progress within the subject or unit framework, comply with workload expectations, and
submit required work on time.
These are some of the expectations we have of you as a student enrolled in this unit:
Given the intensive delivery format, all students are required to attend the workshops on September
17, 18 and 19 to be able to participate in this unit. If you are unable to do so due to work
commitments, please contact the lecturer.
Work, Health and Safety (WH&S)
The University is committed to providing a safe and secure teaching and learning environment. In
addition to specific requirements of this unit, you should refer to the University’s policy at:
www.utas.edu.au/work-health-safety.
Learning Resources
Prescribed Text/Software
A prescribed text is a resource that you must have access to for the purposes of studying this unit. Information regarding
how these may be purchased is attached.
Nil, Key reading will be provided to all students
Recommended Texts/Software
A recommended text is a resource that you can use to broaden your understanding of the topics covered in this unit. You
may also find a recommended text helpful when conducting research for assignments.
Nil
Other Recommended Resources/Software
In addition to the texts (or software) recommended above, students are also expected to be familiar
with the key academic journals in the discipline from which useful insights may be derived. In
particular, students are encouraged to review regularly the relevant papers that are published in:
Nil
My Learning Online (MyLO)
Access to the MyLO online learning environment unit is required for this unit. The unit has its own
MyLO site.
5
BAA517Innovation, Place & Entrepreneurship in Regions
To log into MyLO and access this unit, go to: http://www.utas.edu.au/mylo. To access the unit,
select BAA517.
For help using MyLO go to http://www.utas.edu.au/mylo.
Technical requirements for MyLO
MyLO can be accessed via Library computers and in computer labs on campus. See:
http://www.utas.edu.au/it/computing-distributed-systems/computer-labs-facilities-and-locations
For further technical information and help, contact the UTAS Service Desk on 6226 1818 or at
http://www.utas.edu.au/service-desk during business hours.
Learning to use MyLO
When you log into MyLO, you will see a unit called Getting Started with MyLO. Enter this unit to
learn more about MyLO, and to practise using its features.
MyLO Expectations
1.
Students are expected to maintain the highest standards of conduct across all modes of
communication, either with staff or with other students. Penalties may be imposed if the Unit
Coordinator believes that, in any instance or mode of communication, your language or
content is inappropriate or offensive. MyLO is a public forum. Due levels of respect,
professionalism and high ethical standards are expected of students at all times.
2.
Submission of assessment tasks via MyLO presumes that students have read, understood and
abide by the requirements relating to academic conduct, and in particular, those requirements
relating to plagiarism. All work submitted electronically is presumed to be “signed-off” by the
student submitting as their own work. Any breach of this requirement will lead to student
misconduct processes.
3.
MyLO is an Internet service for teaching and learning provided by the University. It is
expected that you check your units in MyLO for updates at least once a day.
6
BAA517Innovation, Place & Entrepreneurship in Regions
Using MyLO for BAA517
IMPORTANT!: Before you are provided with access to your unit’s MyLO resources, you must
complete the Student Agreement form. To do this:
1. Access the unit’s MyLO site.
2. Locate the Begin Here folder and click on it to open it. You can find the Begin Here folder by
scrolling down until you see Content Browser OR by clicking on the Content button.
OR
3. Once you have opened the Begin Here folder, click on the Student Agreement file.
OR
4. Read the terms, then check the I agree box. You should now be able to access all available
unit content on MyLO. You only need to do this once in each MyLO unit.
Other important resources on MyLO
Students are expected to regularly check on MyLO for any updates in relation to the unit. Essentially,
MyLO has been incorporated into the delivery of this unit to enhance students’ learning experience,
by providing access to up-to-date course materials, and allowing for online discussion. In addition to
the lecture slides which are uploaded on MyLO on a weekly basis, other unit-related materials such
as supplementary readings and assessment guides can also be accessed on MyLO. Further, students
are also expected to engage in an active discussion about issues related to the unit through the
discussion forums or chat rooms that are available on MyLO: this is particularly helpful for distance
students who may utilise the facilities available on MyLO to contact their fellow distance students
and form groups to complete any group assessment tasks for this unit. In this regard, MyLO should
be treated as the unit's critical platform for learning and communication.
Student Feedback via eVALUate
At the conclusion of each unit, students will be asked to provide online responses to a number of
matters relating to the learning and teaching within that unit. All students are asked to respond
honestly to these questions, as all information received is used to enhance the delivery of future
offerings.
Changes to this Unit Based on Previous Student Feedback
Nil
7
BAA517Innovation, Place & Entrepreneurship in Regions
Details of Teaching Arrangements
Blended Learning Mode
This unit employs an intensive workshop process that is supported online and delivered on 17, 18 &
19 September. A process of student-centred learning is used whereby you are required to take full
responsibility for your learning (for a full explanation of this approach, see MyLO). Your attendance
is vital to ensure you meet the assessment requirements of the unit.
If you are unable to attend part of the workshops, you should discuss in advance with your lecturer
what steps you can implement to avoid a loss of opportunity to be assessed. It is not possible to
‘catch up next workshop’ due to time constraints. If you manage any absence from workshops
correctly, there is no reason for you to be penalised. You will only penalise yourself by failing to
make alternative arrangements to overcome your absence.
Communication, Consultation and Appointments
TO KEEP UP WITH ANNOUNCEMENTS REGARDING THIS UNIT
Check the MyLO News tool at least once every two days. The unit News will appear when you first
enter our unit’s MyLO site. Alternatively, click on the News button (towards the top of the MyLO
screen) at any time.
WHEN YOU HAVE A QUESTION
Other students may have the same question that you have. Please go to the Q&A Forum on our
course’s MyLO site. Check the posts that are already there – someone may have answered your
question already. Otherwise, add your question as a new topic. Students are encouraged to support
each other using this forum – if you can answer someone’s question, please do. We will attempt to
respond to questions within 48 business hours. If your question is related to a personal issue or your
performance in the unit, please contact the appropriate teaching staff member by email instead.
WHEN YOU HAVE AN ISSUE THAT WILL IMPACT ON YOUR STUDIES OR THE SUBMISSION OF AN
ASSESSMENT TASK
If you have a personal question related to your studies or your grades, please contact teaching staff
by email.
For general questions about the unit, please add them to the Q&A forum on our unit’s MyLO site.
This way, other students can also benefit from the answers.
A NOTE ABOUT EMAIL CORRESPONDENCE
You are expected to check your UTAS email (WebMail) on a regular basis – at least three times per
week. To access your WebMail account, login using your UTAS username and password at
https://webmail.utas.edu.au/.
You are strongly advised not to forward your UTAS emails to an external email service (such as gmail
or Hotmail). In the past, there have been significant issues where this has occurred, resulting in UTAS
being blacklisted by these email providers for a period of up to one month. To keep informed, please
use your UTAS email as often as possible.
8
BAA517Innovation, Place & Entrepreneurship in Regions
9
We receive a lot of emails. Be realistic about how long it might take for us to respond. Allow at least
TWO (2) business days to reply. Staff are not required to respond to emails where students do not
directly identify themselves, are threatening or offensive, or come from external (non-UTAS) email
accounts.
When you write an email, you must include the following information. This helps teaching staff to
determine who you are and which unit you are talking about.
•
•
•
•
•
•
Family name
Preferred name
Student ID
Unit code (i.e. BAA517)
Questions
If your question is about an assessment task, please include the assessment task
number or name.
Assessment
How Your Final Result Is Determined
In order to pass this unit you must achieve an overall mark of at least 50% of the total available
marks. Details of each assessment item are outlined below.
Assessment Schedule
Assessment Items
Due Date
Idea Development Process
Idea Presentation
Group Sense Making Process
Action Plan
Days 1 and 2
Day 3
Sept 16 & 26
Oct 4
Value/Weighting
25
25
25
25
Link to Learning
Outcomes
1a & 1d
1b, 1d & 2a
4a
1c, 1d, 2b & 4a
Assessment Item 1 – Idea Development Process
Task Description:
During days 1 and 2 you will have the opportunity to develop an idea to
which you have a passion and seen a need for in your community. Your task
is to work collaboratively with other students and to build your idea from the
ground up. Further information can be accessed from MyLO.
Task Length
Undefined
Assessment Criteria:
For details of the assessments for each assessment item, please see the
information provided on MyLO.
Link to Unit’s
Learning Outcomes:
1a & 1d
Due Date:
Days 1 and 2
Value:
25 marks
BAA517Innovation, Place & Entrepreneurship in Regions
Assessment Item 2 – Idea Presentation
Task Description:
You are required to pitch your idea to your fellow students on several
occasions, taking on board feedback on each subsequent time. The aim is to
perfect your pitch so that you are able to anticipate questions and issues to
be found in the reality of your community. Further advice for this task can be
on MyLO.
Task Length
Each presentation will not exceed 3 minutes.
Assessment Criteria:
For details of the assessments for each assessment item, please see the
information provided on MyLO.
Link to Unit’s
Learning Outcomes:
1b, 1d & 2a
Due Date:
Day 3
Value:
25 marks
Assessment Item 3 – Group Sense Making (GSM)
Task Description:
This task is designed to give you an opportunity to gain an understanding of
your feelings and the opinions of other students about the discussed topics.
The assessment is designed to be formative and summative. It should assist
you in the development of your presentation, specifically in regards your
understanding of the context of social innovation in the context of regional
competitiveness and innovation.
Task Length
Approximately 1 paragraph per phase of the process.
Assessment Criteria:
For details of the assessments for each assessment item, please see the
information provided on MyLO.
Link to Unit’s
Learning Outcomes:
4a
Due Date:
GSM1 by September 16 and GSM2 by September 26
Value:
25 marks
Assessment Item 4 – Action Plan
Task Description:
The task is to provide a succinct summary of the C-P-S hypotheses for your
idea, to articulate pictorially your Business Model Sketch and Risk Table.
Finally, you are required to provide evidence of your learning in the unit and
conclude by way of a summary of your idea’s possible future development.
You will receive both formative and summative assessment on your action
plan.
Task Length:
Your action plan should be no longer than 10 A4 pages.
Assessment Criteria:
For details of the assessments for each assessment item, please see the
information provided on MyLO.
10
BAA517Innovation, Place & Entrepreneurship in Regions
Link to Unit’s
Learning Outcomes:
1c, 1d, 2b & 4a
Due Date:
October 4
Value:
25 marks
Submission of Assessment Items
Lodging Assessment Items
Assignments must be submitted electronically through the relevant assignment drop box in MyLO.
Students must ensure that their name, student ID, unit code, tutorial time and tutor’s name (if
applicable) are clearly marked on the first page. If this information is missing, the assignment will
not be accepted and, therefore, will not be marked.
Where relevant, Unit Coordinators may also request students submit a paper version of their
assignments. Students will be advised by the Unit Coordinator of the appropriate process relevant
to each campus (Hobart, Launceston or Cradle Coast).
Please remember that you are responsible for lodging your assessment items on or before the due
date and time. We suggest you keep a copy. Even in ‘perfect’ systems, items sometimes go astray.
Late Assessment and Extension Policy
In this Policy:
1.
2.
3.
4.
5.
6.
7.
(a) ‘day’ or ‘days’ includes all calendar days, including weekends and public holidays;
(b) ‘late’ means after the due date and time; and
(c) ‘assessment items’ includes all internal non-examination based forms of assessment
This Policy applies to all students enrolled in TSBE Units at whatever Campus or geographical
location.
Students are expected to submit assessment items on or before the due date and time specified
in the relevant Unit Outline. The onus is on the student to prove the date and time of
submission.
Students who have a medical condition or special circumstances may apply for an extension.
Requests for extensions should, where possible, be made in writing to the Unit Coordinator on
or before the due date. Students will need to provide independent supporting documentation
to substantiate their claims.
Late submission of assessment items will incur a penalty of 10% of the total marks possible for
that piece of assessment for each day the assessment item is late unless an extension had been
granted on or before the relevant due date.
Assessment items submitted more than five (5) days late will not be accepted.
Academic staff do NOT have the discretion to waive a late penalty, subject to clause 4 above.
Academic Referencing and Style Guide
Before starting their assignments, students are advised to familiarise themselves with the following
electronic resources.
11
BAA517Innovation, Place & Entrepreneurship in Regions
The first is the Harvard Referencing System Style Guide, which can be accessed from the UTAS
library: http://utas.libguides.com/content.php?pid=27520&sid=199808. The Harvard style is the
appropriate referencing style for this unit and the guide provides information on presentation of
assignments, including referencing styles. In your written work you will need to support your ideas
by referring to scholarly literature, works of art and/or inventions. It is important that you
understand how to correctly refer to the work of others and maintain academic integrity.
Failure to appropriately acknowledge the ideas of others constitutes academic dishonesty
(plagiarism), a matter considered by the University of Tasmania as a serious offence.
The second is the Tasmanian School of Business and Economics’s Writing Assignments: A Guide,
which can be accessed at: http://www.utas.edu.au/business-and-economics/student-resources ..
This guide provides students with useful information about the structure and style of assignments in
the TSBE.
Review of Assessment and Results
Review of Internal Assessment
It is expected that students will adhere to the following policy for a review of any piece of
continuous/internal assessment. The term continuous/internal assessment includes any assessment
task undertaken across the teaching phase of any unit (such as an assignment, a tutorial
presentation, and online discussion, and the like), as well as any capstone assignment or take-home
exam.
Within five (5) days of release of the assessment result a student may request a meeting with the
assessor for the purpose of an informal review of the result (in accordance with Academic
Assessment Rule No. 2 Clause 22 – www.utas.edu.au/academic-governance/academicsenate/academic-senate-rules . During the meeting, the student should be prepared to discuss
specifically the marks for the section(s) of the marking criteria they are disputing and why they
consider their mark(s) is/are incorrect. The assessor will provide a response to the request for
review within five (5) days of the meeting.
If the student is dissatisfied with the response they may request a formal review of internal
assessment by the Head of School, with the request being lodged within five (5) days of the informal
review being completed. A Review of Internal Assessment Form is available at the following link:
http://www.utas.edu.au/business-and-economics/student-resources/forms. The form must be
submitted to the TSBE Office.
Review of Final Exam/Result
In units with an invigilated exam students may request a review of their final exam result. You may
request to see your exam script after results have been released by completing the Access to Exam
Script Form, which is available from the TSBE Office, or at the following link –
http://www.utas.edu.au/business-and-economics/student-resources/forms. Your unit coordinator
will then contact you by email within five (5) working days of receipt of this form to go through your
exam script.
Should you require a review of your final result a formal request must be made only after
completing the review of exam script process list above. To comply with UTAS policy, this request
12
BAA517Innovation, Place & Entrepreneurship in Regions
must be made within ten (10) days from the release of the final results (in accordance with
Academic Assessment Rule No. 2 Clause 22 – www.utas.edu.au/academic-governance/academicsenate/academic-senate-rules . You will need to complete an Application for Review of Assessment
Form, which can be accessed from http://www.utas.edu.au/exams/exam-and-results-forms. Note
that if you have passed the unit you will be required to pay $50 for this review.
The TSBE reserves the right to refuse a student request to review final examination scripts should
this process not be followed.
Further Support and Assistance
If you are experiencing difficulties with your studies or assessment items, have personal or lifeplanning issues, disability or illness that may affect your study, then you are advised to raise these
with your lecturer or tutor in the first instance.
If you do not feel comfortable contacting one of these people, or you have had discussions with
them and are not satisfied, then you are encouraged to contact:
ACADEMIC DIRECTOR – POSTGRADUATE PROGRAMS
Name: Dr Rob Hecker
Room: 307, Centenary Building, Sandy Bay
Email: [email protected]
Students are also encouraged to contact their Undergraduate Student Adviser who will be able to
help in identifying the issues that need to be addressed, give general advice, assist by liaising with
academic staff, as well as referring students to any relevant University-wide support services. Please
refer to the Student Adviser listings at www.utas.edu.au/first-year/student-advisers for your
adviser’s contact details.
There is also a range of University-wide support services available to students, including Student
Centre Administration, Careers and Employment, Disability Services, International and Migrant
Support, and Student Learning and Academic Support. Please refer to the Current Students website
(available from www.utas.edu.au/students) for further information.
If you wish to pursue any matters further then a Student Advocate may be able to assist.
Information about the advocates can be accessed from www.utas.edu.au/governance-legal/studentcomplaints. The University also has formal policies, and you can find out details about those from
that link.
13
BAA517Innovation, Place & Entrepreneurship in Regions
Academic Misconduct and Plagiarism
Academic misconduct includes cheating, plagiarism, allowing another student to copy work for an
assignment or an examination, and any other conduct by which a student:
(a) seeks to gain, for themselves or for any other person, any academic advantage or advancement
to which they or that other person are not entitled; or
(b) improperly disadvantages any other student.
Students engaging in any form of academic misconduct may be dealt with under the Ordinance of
Student Discipline. This can include imposition of penalties that range from a deduction/cancellation
of marks to exclusion from a unit or the University. Details of penalties that can be imposed are
available in the Ordinance of Student Discipline – Part 3 Academic Misconduct, see
http://www.utas.edu.au/university-council/university-governance/ordinances.
Plagiarism is a form of cheating. It is taking and using someone else’s thoughts, writings or
inventions and representing them as your own, for example:
•
•
•
using an author’s words without putting them in quotation marks and citing the source;
using an author’s ideas without proper acknowledgment and citation; or
copying another student’s work.
It also means using one’s own work from previously submitted assessment items if repeating a unit.
If you have any doubts about how to refer to the work of others in your assignments, please
consult your lecturer or tutor for relevant referencing guidelines, and the academic integrity
resources on the web at http://www.utas.edu.au/academic-integrity/The intentional copying of
someone else’s work as one’s own is a serious offence punishable by penalties that may range from
a fine or deduction/cancellation of marks and, in the most serious of cases, to exclusion from a unit,
a course, or the University.
The University and any persons authorised by the University may submit your assessable works to
a plagiarism checking service, to obtain a report on possible instances of plagiarism. Assessable
works may also be included in a reference database. It is a condition of this arrangement that the
original author’s permission is required before a work within the database can be viewed.
For further information on this statement and general referencing guidelines, see
www.utas.edu.au/plagiarism/ or follow the link under ‘Policy, Procedures and Feedback’ on the
Current Students homepage.
14
BAA517Innovation, Place & Entrepreneurship in Regions
15
Study Schedule
Day
Time
Focus Areas
Tasks
Due Dates
GSM1 – 16/9
1 – Sept 17
9am – 4pm
Unit Introduction
Idea Development Process
Your Ideas (CPS
and the lean
startup process)
Idea Development Process
Environmental
Awareness
2 – Sept 18
9am – 4pm
Customer
Development
Process
Idea Development Process
Idea Development Process
Using Social Media Idea Development Process
3 – Sept 19
9am – 3pm
Selling your
message
Idea Development Process
Your pitch
Idea Presentation
GSM2 – 26/9
Action Plan 4/10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement