Faber 630006506 Ventilation Hood User Manual

Faber 630006506 Ventilation Hood User Manual
Integrated Collection
A hidden Jewel in your kitchen for total integration
upper cabinet tiltout rangehood
accepts a custom face plate
closes flush with cabinets
replaces 18” upper cabinet
600 cfm PRO motor
2 halogen lights
3 speed control
dishwasher safe grease filters
convertible to ductless *
top venting
easy mounting system
sone range: 3.5 - 6.5
6” duct
* it is highly recommended that
professional style cooking always be
vented to the outside.
For a seamless look in the kitchen, the Jewel is your integrated
solution. The Jewel tilts in, flush with your cabinets, neatly tucking the
hood away. You supply your own custom cabinet face to integrate the
Jewel in with your other cabinets. A hidden Jewel in your kitchen!
Size/Color/Model #
24 Integrated
36 Integrated
Charcoal Filters
For ductless installations, high
quality, heavy duty filters ensure the
removal of smoke and odors from
the kitchen.
The Jewel comes with an unfinished
metal front which you can attach to
your custom cabinet face. This 18”
tall rangehood replaces your upper
cabinet, and when tilted out, extends
9.5”, for a total depth of 20.5” from
front to back, providing adequate
coverage for most cooktops.
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: [email protected] • www.faberonline.com
Dimensional Diagram
Front View
Side Views (Closed and Open)
Custom Front Panel Dimensions - for integrating the Jewel into your existing cabinetry
If you need a 30” wide cabinet, you
would purchase the 24” Jewel and
have a cabinet shop make a 30” wide
by 18 7/8” high panel. Or your cabinet
maker can fabricate 2 - (3”) wide filler
strips for either side of the 24” Jewel.
For a 24” wide cabinet, make a 24”
wide by 18 7/8” tall panel. For a 36”
wide cabinet, make a 36” wide by 18
7/8” tall panel.
24”, 30”, 36”
Pre-Planning Your Installation - Important: Consult the installation instructions before you begin installing this
rangehood. The recommended height to install this hood off the cooktop is a minimum of 30” for maximum effectiveness.
Also consult the cooktop manufacturer’s recommendation.
Pre-Planning Your Ductwork
Ductless Installations
Make your ductrun as straight and short as possible.
The ductrun should not exceed 35 equivalent feet if
ducted with 6” round duct. Count 45º angles as 3 feet,
90º elbows as 5 feet, and 90º flat elbows as 12 feet.
For installations where ductwork
is impossible or highly impractical
Charcoal Filters, which attach to
the blower assembly, absorb smoke
and odors.
- Important:
Consult the installation instructions before you begin
installing this rangehood.
Top View
For best results, use no more than three 90°
elbows. Make sure that there is a minimum of 24”
of straight duct between elbows if more than one
is used. Do not install two elbows together. If you
must elbow right away, do it as far away from the
hood’s exhaust opening as possible.
The air returns back into your
kitchen (see right) from the top of
the hood thru a vent grate, if you
have cabintery or a cabinet front or
soffit extending from the hood to
the ceiling, air must be allowed to
escape back into the room.
NOTE: If you are ducting the Jewel to the outside of
your house and your cabinetry does not extend to the
ceiling of your kitchen, you may want to conceal the
metal ductwork that extends above the rangehood with
additional wood paneling to match cabinetry.
WARNING! Product specifications are subject to change
without notification. Consult the installation instructions before
you begin installing this rangehood.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF