Fagor America 5HA-200 RX Convection Oven User Manual

SUPPLIED ACCESSORIES
Remote Control Unit
Batteries
Owner’s Manual
( NE240UD )
2 AA Batteries
( 1EMN20335 )
• If you need to replace these accessories, please refer to the PART NO. under the illustrations and call our
•
help line mentioned on the front page.
Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators
(Splitter). Contact your local electronics store for these items.
The serial number of this product may be found on the back of the unit. No other unit has the same serial
number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
IMPORTANT SAFEGUARDS
1.Read instructions-All the safety and operating instructions
should be read before the appliance is operated.
2.Retain Instructions-The safety and operating instructions
should be retained for future reference.
3.Heed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions-All operating and use instructions
should be followed.
5.Cleaning-Unplug the unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to
unplugging the appliance in the cleaning description otherwise required in item 5.
PORTABLE CART WARNING
8.Accessories-Do not place this unit
on an unstable cart, stand, tripod,
bracket, or table. The unit may fall,
causing serious injury to someone,
and serious damage to the appliance.
Use only with a cart, stand, tripod,
S3126A
bracket, or table recommended by
the manufacturer, or sold with the
unit. Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory
recommended by the manufacturer. An appliance and cart
combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and
cart combination to overturn.
6.Attachments-Do not use attachments not recommended by
the unit manufacturer as they may cause hazards.
7.Water and Moisture-Do not use this unit near water-for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
-2-
POUR
AMEUBLES- Cet appareil ne doit SYMBOLELESD'AVERTISSEMENT
COMPOSANTES
être placé que sur un meuble (avec APPAREIL ET MEUBLE A ROULETTES
ou sans roulettes) recommandé par
le fabricant. Si vous l’installez sur
un meuble à roulettes, déplacez les
deux ensembles avec précaution. Un
arrêt brusque, l’utilisation d’une
S3126A
force excessive et des surfaces
irrégulières risquent de déstabiliser l’ensemble et de le renverser.
EN
9.Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating, and
these openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should never be
placed near or over a radiator or heat register. This unit
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.
10.Power Sources-This unit should be operated only from the
type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For the
units intended to operate from battery power, or other
sources, refer to the operating instructions.
11.Grounding or Polarization-This unit is equipped with a
polarized alternating-current line plug(a plug having one
blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
12.Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
15.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
16.Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry-Never push objects of any kind
into this unit through openings as they may touch dangerous voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the
unit.
18.Servicing-Do not attempt to service this unit yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
19.Damage Requiring Service-Unplug this unit from the wall
outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the
unit.
13.Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the unit, be sure the antenna
or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA
No. 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment
of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the unit to its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performance,
this indicates a need for service.
F IGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECT RICAL CODE
20.Replacement Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other hazards.
ANTE NNA
L EAD I N
WI RE
GROUND
CLAMP
21.Safety Check-Upon completion of any service or repairs to
this unit, ask the service technician to perform routine safety checks to determine that the unit is in proper operating
condition.
A NTENNA
DI SCHARG E UN I T
(NEC SECTION 8 10 -2 0)
EL ECT RI C
SE RV I CE
EQ U I PM EN T
14.Lightning-For added protection for this unit receiver during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the unit due to lightning and power-line
surges.
22.Heat-This unit product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
G RO UNDI NG CO NDUCT ORS
(NEC SECTION 8 10 -2 1)
G RO UND CL AM PS
NEC - NATI O NAL EL ECTRI CAL CO DE
POWER SERVI C E G RO UNDI NG
EL EC TR O DE SYST EM
(NEC ART 2 50 , PART H)
S2 8 9 8 A
-3-
EN
PRECAUTIONS
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must
be authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is prohibited.
FCC WARNING- This equipment may generate or use
radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless
the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and
receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
LASER SAFETY
This unit employs a laser. Only a qualified service person
should remove the cover or attempt to service this device,
due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC
ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU
FOND.
A NOTE ABOUT RECYCLING
Batteries should never be thrown away or incinerated but
disposed of in accordance with your local regulations concerning chemical wastes.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.
The caution marking is located on the rear of the cabinet.
-4-
EN
LOCATION
SYMBOLS USED IN THIS MANUAL
For safe operation and satisfactory performance of
your unit, keep the following in mind when selecting
a place for its installation:
• Shield it from direct sunlight and keep it away
from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes
at the top or bottom of the unit. Do not place the
unit on a carpet because this will block the ventilation holes.
• Install unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the unit near strong magnetic fields.
• Avoid moving the unit to locations where temperature differences are extreme.
• Be sure to remove a disc and unplug the AC power
cord from the outlet before carrying the unit.
The following symbols below appear in some headings in this manual.
: Description refers to playback of DVD video discs
(in the DVD mode).
: Description refers to playback of Audio CDs
(in the DVD mode).
: Description refers to playback of CDs with MP3
files (in the DVD mode).
QUICK
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
TILT STAND
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting
•
•
•
it from an AC wall outlet. Grasp it by the plug.
If by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Do not put your fingers or objects into the unit
disc slot.
Do not place anything directly on top of the unit.
You can adjust the stand to change the angle of the
TV (-5° to 10°).
-5°
10°
WARNING
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a unit which
has moisture, it may damage the DVD and the unit.
Therefore when the condensation occurs inside the
unit, turn the unit on and allow at least 2 hours for
the unit to dry out.
-5-
EN
TABLE OF CONTENTS
SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . .2
PRECAUTIONS . . . . . . . . . . . . . . . . . .
LOCATION . . . . . . . . . . . . . . . . . . .
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE . .
WARNING . . . . . . . . . . . . . . . . . . . .
SYMBOLS USED IN THIS MANUAL
TILT STAND . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .4
. . . . . . . . . . . . . .5
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. .5
. .5
. .5
. .5
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . .6
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . .8
INSTALLING THE BATTERIES . . . . . . . . . . . . . . . . . .9
PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . .10
ANTENNA/CABLE CONNECTION . . . . . . . . . . . . . . .10
EXTERNAL CONNECTION . . . . . . . . . . . . . . . . . . . . .11
SEARCH FUNCTION . . . . . . . .
TRACK SEARCH . . . . . . . . .
TITLE / CHAPTER SEARCH
TIME SEARCH . . . . . . . . . .
MARKER SETUP SCREEN .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.22
.22
.22
.23
.23
SPECIAL PLAYBACK FUNCTION
REPEAT . . . . . . . . . . . . . . . . .
A-B REPEAT . . . . . . . . . . . . . .
PROGRAM . . . . . . . . . . . . . . .
RANDOM PLAYBACK . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.24
.24
.24
.25
.25
CHANGING THE SETTINGS
SUBTITLE LANGUAGE . .
AUDIO LANGUAGE . . . . .
STEREO SOUND MODE .
CAMERA ANGLE . . . . . .
BLACK LEVEL SETTING .
VIRTUAL SURROUND . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.26
.26
.26
.26
.27
.27
.27
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
THE ON-SCREEN INFORMATION . . . . . . . . . . . . . . . . .28
TV SECTION
TV OPERATION AND SETTINGS . . . . . . . . . . .
WATCHING A TV PROGRAM . . . . . . . . . . . .
CHANNEL SET UP . . . . . . . . . . . . . . . . . . . .
PICTURE CONTROL . . . . . . . . . . . . . . . . . . .
BACK LIGHT SETTING . . . . . . . . . . . . . . . . .
SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . .
CLOSED CAPTION SYSTEM . . . . . . . . . . . .
MTS (Multi-Channel Television Sound) System
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . .
A TV RATING SET UP . . . . . . . . . . . . . . . . .
B MPAA RATING SET UP . . . . . . . . . . . . . .
C CHANGE ACCESS CODE . . . . . . . . . . . .
MENU LANGUAGE . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.12
.12
.13
.14
.14
.14
.15
.15
.16
.16
.17
.17
.17
CHANGING THE DVD SET UP
CUSTOM MENU . . . . . . . .
D LANGUAGE SETTING .
E DISPLAY SETTING . . . .
F AUDIO SETTINGS . . . .
G PARENTAL CONTROL .
H OTHER SETTINGS . . . .
INITIALIZE . . . . . . . . . . . . .
ITEMS
......
......
......
......
......
......
......
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.29
.29
.29
.30
.30
.31
.31
.32
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . .33
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
DVD SECTION
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . .18
UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . .18
PLAYING A DISC . . . . . . . . . . . . . . . . . .
BASIC PLAYBACK . . . . . . . . . . . . . . .
DISC MENU . . . . . . . . . . . . . . . . . . .
TITLE MENU . . . . . . . . . . . . . . . . . . .
RESUME . . . . . . . . . . . . . . . . . . . . . .
PAUSE . . . . . . . . . . . . . . . . . . . . . . .
STEP BY STEP PLAYBACK . . . . . . .
FAST FORWARD / FAST REVERSE .
SLOW FORWARD / SLOW REVERSE
ZOOM . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.19
.19
.20
.20
.20
.20
.20
.21
.21
.21
-6-
EN
FEATURES
TV Mode
• MTS/SAP Tuner
• Infrared remote control
• Trilingual on screen TV setup display available in
• Auto power off system–If there is no air signal input
•
English, Spanish or French
• 181 channel capability PLL frequency synthesizer
•
tuner with direct station call (A converter may be
•
necessary to view scrambled cable channels.)
Closed Caption Decoder–You may view specially
labeled (cc) TV programs, movies, news, etc. with
either a dialogue caption or text display added to
the program.
from the antenna terminal and no operation for 15
minutes, the unit will turn itself off automatically.
Sleep timer–Allows you to have the unit automatically turn off at a desired time.
V-CHIP–Enables parents to prevent their children
from watching inappropriate material on TV.
DVD Mode
• Dolby Digital sound
• Parental lock
This unit can handle Dolby Digital surround sound
having 5.1 channels when connected to a Dolby
Digital decoder.
You can set the control level to limit playback of
discs which may not be suitable for children.
• Automatic detection of discs
• Still/fast/slow/step playback
Various playback modes are available including
still pictures, fast forward/reverse, slow motion and
step frames.
This unit automatically detects if the loaded disc is
DVD, Audio CD or MP3 on disc.
• On-screen display
Information about the current operation can be displayed on a TV screen, allowing you to confirm
the currently active functions (such as program
playback), on the TV screen using the remote control.
• Random playback for Audio CD and MP3
This unit can shuffle the order of tracks to play
them in random order.
• Program playback for Audio CD and MP3
You can program the order of tracks to play them
in any desired order.
• DVD menus in a desired language
You can display DVD menus in a desired language, if available on a DVD.
• Screen saver
If the screen saver program is set to ON, it starts
when there is no input from the unit for 5 minutes
in stop mode.
• Subtitles in a desired language
You can select a desired language for the display
subtitles, if that language is available on a disc.
• Selecting a camera angle
You can select the desired camera angle, if a disc
contains sequences recorded from different angles.
• Choices for audio language and sound mode
You can select the desired audio language and
sound mode, if different languages and modes are
available on a disc.
• Search
Chapter search / Title search / Track search / Time
search
• Repeat
Chapter / Title / Track / Group / All / A-B
• Zoom
Allows you to enlarge video image.
• Marker
The part designated by user can be called back.
• Resume Play
User can resume to playback from the part at
which the play was stopped.
• Virtual Surround
• Bit rate indication
• DRC (Dynamic range control)
You can control the range of sound volume.
-7-
EN
OPERATING CONTROLS AND FUNCTIONS
NOTE
• When you select DVD mode, press [SELECT], [PLAY O] or [EJECT A] first or insert a disc into the
disc slot. Otherwise, the DVD features are not operated.
- REMOTE CONTROL
For DVD mode (P.28):
Press to display the current status on the TV screen.
9. SETUP button (P13, P.29)
Press to enter or exit the setup menu of TV/DVD.
1
15
10. TITLE button (P.20)
16
2
1
2
3
Press to display the title menu.
CH.
17
CLEAR
button (P12, P.22)
11.
4
5
6
3
Press to clear/cancel a setting currently entered.
7
8
9
Press to clear “DISC INSIDE” display.
VOL.
SLEEP
+100
18
MODE
button (P.25)
12.
0
+10
4
Press to call up the program/random screen in
SKIP
ZOOM
MUTE
19
stop mode.
20
5
Press to call up the Black Level Setting/Virtual
21
6
PLAY
Surround screen during playback.
REV
FWD
STOP
13. SEARCH MODE button (P.22, P23)
22
DISC
Press to locate a desired point.
PAUSE SLOW
MENU
7
23
14. AUDIO button (P.26)
DISPLAY
24
For TV mode (P.15): Press to select TV sound
ENTER
8
25
mode (STEREO/SAP/MONO).
SETUP
TITLE
RETURN
9
26
For DVD mode (P.26): Press to select a desired
10
A-B
CLEAR SEARCH MODE REPEAT
audio language (if available).
27
11
AUDIO SUBTITLE ANGLE
MODE
15. EJECT A button (P.19)
12
28
Press to remove a disc from the unit.
29
13
16. SELECT button (P.12)
Press to select the TV mode, external input mode
14
30
or DVD mode.
[Fig. 1]
17. CH. K / L buttons (P.12)
1. POWER button (P.12)
Press to select memorized channels.
Press to turn the power on and off.
18. VOL. X / Y buttons (P.12)
2. PICTURE button (P.14)
Press to control the volume level for the DVD
Press to adjust the picture.
and TV.
3. Number buttons (P.13)
19. MUTE button (P.12)
Press to select a desired channel number directly.
Press to mute the sound or press it again to
+100 button (For TV mode)
restore sound.
Press to select channels higher than 99.
ZOOM button (P.21)
20.
+10 button (For DVD mode)
Press to enlarge the part of a DVD-reproduced
Press to enter desired numbers higher than 9.
image.
4. SLEEP button (P.14)
21. REV h button (P.21)
Press to set the Sleep Timer.
Press to view the DVD picture in fast/slow
5. SKIP H / G buttons (P.22)
reverse motion.
Press once to skip chapters/tracks to a desired point.
FWD g button (P.21)
6. PLAY O button (P.19)
Press to view in fast/slow forward motion.
Press to playback the disc.
22. STOP C button (P.19)
7. PAUSE F button (P.20)
Press to stop operation of the disc.
Press to pause the current disc operation.
23. DISC MENU button (P.20)
8. DISPLAY button
– Calls up the DVD menu.
For TV mode (P.15):
– Calls up the file list in MP3 disc.
Press to display the current channel number on
24. ENTER button (P.16)
the TV screen.
Press to accept a setting.
-8EN
POWER PICTURE SELECT
EJECT
25. K (Up) / L (Down) / { (Left) / B (Right) buttons
Press to select or adjust menu items.
26. RETURN button (P.27)
Press to return to the previous screen in the setup
menu.
27. A-B button (P.24)
Press to repeat the playback of a selected section.
28. ANGLE button (P.27)
Press to change the camera angle to see the
sequence being played back from a different angle
(if available).
29. REPEAT button (P.24)
Repeats playback of the current disc, title, chapter, group or track.
30. SUBTITLE button (P.26)
Press to select a desired subtitle language.
- FRONT PANEL
C STOP
B PLAY
31. C STOP button (P.19)
Press to stop operation of the disc.
32. Remote sensor window
33. MENU button
Press to enter or exit the setup menu of TV/DVD.
34. VOLUME X / Y buttons (P.12)
Press to control the volume level for the DVD
and TV.
35. CHANNEL K / L buttons (P.12)
Press to select memorized channels.
36. SELECT button (P.12)
Press to select to TV mode, external input mode
or DVD mode.
37. POWER button (P.12)
Press to turn the power on and off.
38. A EJECT button (P.19)
Press to remove a disc from the unit.
39. B PLAY button (P.19)
Press to playback of the disc.
A EJECT
POWER
MENU
31
32 33
Y VOLUME X
34
L CHANNEL K
35
SELECT
36 37 38 39
[Fig. 2]
INSTALLING THE BATTERIES
BATTERY PRECAUTIONS
1 Open the battery compartment cover by
• Be sure to follow the correct polarity as indicated
pressing the cover on the remote unit in the
direction of the arrow.
2 Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by
the polarity (+/-) markings.
3 Replace the cover.
•
•
•
•
in the battery compartment. Reversed batteries
may cause damage to the device.
Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture.
NOTE
We do not recommend the use of universal remote controls. Not all of the functions may be controlled
with a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given
may not operate this unit. In this case, please call the manufacturer of the universal remote control.
-9-
EN
PREPARATION FOR USE
ANTENNA/CABLE CONNECTION
NOTE
• Cables used here are commercially available.
• For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. jack
before moving the unit.
- ANTENNA/CABLE CONNECTION
IF YOU HAVE A JACK ON THE WALL
[Rear of this unit]
Connect the TV to the wall-mounted antenna jack
with on RF cable (commercially available).
DIGITAL
AUDIO OUT
(COAXIAL)
VIDEO2
R
AUDIO
L
IF YOU HAVE A WIRED CABLE
COMPONENT
Y
from Cable Company
or Satellite Antennna
Pb
Pr
Connect the TV to the wired antenna cable.
NOTE
R
AUDIO
L
VIDEO1
VIDEO
S-VIDEO
RF Cable
• Before plugging the antenna into the ANT. jack of the
ANT
HEAD PHONE
unit, check that the pin is not bent. If it is bent,
straighten the pin as illustrated, then plug the pin into
the ANT. jack of the unit.
Bent pin
Cable
Plug
(Needs to be
straightened)
(Straight pin)
- CABLE/SATELLITE BOX CONNECTION
[Rear of this unit]
DIGITAL
AUDIO OUT
(COAXIAL)
Cable Box
or Satellite Box
VIDEO2
R
AUDIO
L
COMPONENT
Y
Pb
Pr
R
AUDIO
L
OUT
VIDEO1
VIDEO
IN
S-VIDEO
WHEN USING CABLE BOX/SATELLITE
BOX
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown above.
Channel selection must be made with the converter
box or satellite box. This means that channels cannot
be changed using the remote control of this unit.
ANT
HEAD PHONE
75-ohm
Coaxial Cable
ANT
from Cable Company
or Satellite Antenna
NOTE
For CATV system installer:
• This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
- 10 -
EN
EXTERNAL CONNECTION
You can connect this unit to your own Audio/Video
equipment.
• Be sure to turn off the power to all components in
the system before connecting another component.
• Refer to the Owner’s Manuals for the equipments
to be connected to the unit.
NOTE
When you use external connections, select “VIDEO1” or
“VIDEO2” by pressing [SELECT]. (Refer to page 12.)
• To use the VIDEO1 input jacks, select “VIDEO1”.
• To use the VIDEO2 input jacks, select “VIDEO2”.
[Rear of this unit]
AUDIO
DIGITAL
AUDIO OUT
(COAXIAL)
VIDEO2
R
AUDIO
L
VIDEO2
COMPONENT
Y
Pb
Pr
R
AUDIO
VIDEO1
L
VIDEO 1
VIDEO
S-VIDEO
ANT
HEAD PHONE
- VIDEO1 INPUT
Use this connection if your own A/V equipment (e.g.
VCR) has Video output and Audio out jacks. When
using S-Video cable, better picture is available.
ex.
R
A U D IO
L
V ID E
O1
VI DE O
S- VI DE
Audio Cable
(OUT)
Video Cable
(OUT)
OR
O
S-Video Cable
(OUT)
Video Cassette
Recorder
NOTE
• If your own equipment is monaural (has only one Audio jack), connect the Audio cable to AUDIO L jack of this unit.
• If you connect Video jack and S-VIDEO jack simultaneously, the S-VIDEO jack is given priority over the VIDEO jack.
- VIDEO2 INPUT
ex.
VID EO2
R
Audio Cable
(OUT)
AU DIO
L
COM PON ENT
Y
Video Camera
Component
Video Cable
Use this connection if your own A/V equipment (e.g.
video camera, video game) has COMPONENT
Video output (Y, Pb, Pr) jacks. You can enjoy the
best picture with this connection.
(OUT)
Pb
Pr
Video Game
- AUDIO OUTPUT
You can enjoy DVD sound with more
presence by connecting digital audio
equipment such as Dolby Digital decoder.
To COAXIAL DIGITAL
AUDIO INPUT jack
DI GI TA L
T
AU DI O OU
L)
(C OA XIA
Home Audio System
Dolby Digital decoder
NOTE
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.
• If connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “BITSTREAM” for audio output in the setup mode. (Refer to page 30.)
• Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “PCM” for audio output in the setup mode. Playing
a unit using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to page 30.)
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
- 11 -
EN
TV SECTION
TV OPERATION AND SETTINGS
POWER PICTURE SELECT
1
2
3
4
5
6
7
8
NOTE
For channel number selection with number
buttons:
• To select single-digit channel number, press
[0] first. (e.g. Press [0] [2] for channel 2.)
• To select cable channels which are higher
than 99, press [+100/+10] first.
(e.g. Press [+100/+10] [2] [5] for channel 125.)
EJECT
CH.
9
0
4 Press [VOL. X / Y] to select the desired vol-
VOL.
+100
SLEEP
+10
SKIP
ZOOM
ume level.
MUTE
VOL.
PLAY
REV
FWD
STOP
VOLUME
20
C C C C CC C C C C C C C C C C
PAUSE
DISC
MENU
SLOW
• Press [MUTE] to instantly mute the sound.
Press it again to restore the previous volume
level.
NOTE
• If you press [CH. K / L] in the DVD mode,
you can change the TV channels. Even if you
turn off the unit in the DVD mode, when you
turn it on again, it will go into the TV mode.
DISPLAY
ENTER
SETUP
TITLE
RETURN
• Shaded buttons are used for following operation.
WATCHING A TV PROGRAM
1 Plug the power cord into a standard
TO WATCH CABLE OR SATELLITE
CHANNEL
AC outlet.
If the unit is connected to a cable box or satellite
box, press [CH. K / L] to select CH3 or CH4
according to the output channel setting of the device
and select desired channel on that device.
NOTE
If
• any digits are displayed in the corner of the
screen, press [POWER] without unplugging
the power cord.
TO WATCH EXTERNAL INPUT
2 Press [POWER] to turn on the unit.
POWER
3 Press [CH. K / L] to select the desired chan-
When an external equipment is connected to the front
AUDIO/VIDEO input jacks, press [SELECT] or
[CH. K / L] repeatedly until “VIDEO1” or
“VIDEO2” appears on the screen.
nel number.
sage is displayed on the screen for 10 seconds.
CH.
OR
Press the Number buttons to enter the
desired channel number.
1
4
7
NOTE
• If a disc is inside the unit, “DISC INSIDE” mes-
2
5
8
DISC INSIDE
3
6
9
• To clear the message instantly, press [CLEAR].
+100
0
+10
- 12 -
EN
ADDING/DELETING CHANNELS
CHANNEL SET UP
As the initial setting, this unit has memorized all
channels, including the ones not available in your
area. This feature automatically puts only available
channels into the memory.
1 Press [SETUP] then press [K] or [L] to point
to “CHANNEL SET UP”.
- TV SET UP -
1 Press [SETUP] then press [K] or [L] to point
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION
[OFF]
BACK LIGHT [BRIGHT]
SETUP
to “CHANNEL SET UP”.
- TV SET UP -
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION
[OFF]
BACK LIGHT [BRIGHT]
2 Press [ENTER] then press [K] or [L] to point
to “ADD/DELETE CH”.
– CHANNEL SET UP –
2 Press [ENTER] then press [K] or [L] to point
B ADD / DELETE CH (CATV)
to “AUTO PRESET CH”.
AUTO PRESET CH
ENTER
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
ENTER
B AUTO PRESET CH
3 Press [ENTER] then press the Number buttons or [CH. K / L] to select the desired
channel number.
3 Press [ENTER].
15
ENTER
ENTER
• The tuner scans and memorizes all the active
1
4
7
2
5
8
3
6
9
+100
channels in your area.
• The tuner stops on the lowest memorized channel.
NOTE
When
“AUTO PRESET CH” is activated
•
where there is no TV signal input, “NO TV
SIGNAL” will appear on the display after the
completion of channel scanning.
0
+10
ADD/DELETE
4 Press [ENTER] then the channel number
turned to red. The channel is deleted from
memory. If the channel number turned to
blue, the channel is added into memory.
ENTER
• To delete another channel, repeat steps 3 to 4.
• If you press [ENTER] again, the channel is
• The unit may recognize CATV channels to be
TV channels if reception condition is poor. In
this case, check the antenna connection and try
“AUTO PRESET CH” again when reception
conditions are better.
• Channel memory programming is NOT necessary when connected to a cable box or satellite box. Just select the channel for cable box
or satellite input (ex. CH3) on the unit, then
select your desired channel on the cable box
or satellite box.
memorized again.
Added channel : Light blue
Deleted channel : Light red
5 Press [SETUP] to exit the menu.
SETUP
NOTE
• To confirm that channel(s) has been deleted
or added, press [CH. K / L].
- 13 -
EN
TV SECTION
SETUP
TV OPERATION AND SETTINGS
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
AUTO CHANNEL PROGRAMMING
POWER PICTURE SELECT
NOTE
EJECT
• The picture control display will disapper automati7
cally after 10 seconds unless you press any buttons.
3
9
8
0
• Magnetism from near by appliances and speakers
VOL.
+100
SLEEP
+10
SKIP
ZOOM
might affect the color of TV picture. If this happens, press [POWER] to turn off the TV and turn
it on again after about 30 minutes.
MUTE
PLAY
REV
FWD
STOP
PAUSE
BACK LIGHT SETTING
DISC
MENU
SLOW
1 Press [SETUP] then press [K] or [L] to point
DISPLAY
ENTER
SETUP
TITLE
to “BACK LIGHT”.
RETURN
- TV SET UP -
CLEAR SEARCH MODE REPEAT
A-B
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION
[OFF]
B BACK LIGHT [BRIGHT]
SETUP
AUDIO
MODE
SUBTITLE
ANGLE
• Shaded buttons are used for following operation.
2 Press [ENTER] then press [s] or [B] to
select to “BRIGHT”, “NORMAL” or “DARK”.
PICTURE CONTROL
ENTER
The unit’s picture controls, brightness, contrast,
color, tint and sharpness, are preset to factory specifications. Although they are usually the best, you
may need to make some further adjustments for a
more natural looking image.
3 Press [SETUP].
SETUP
SLEEP TIMER
1 Press [PICTURE] then press [K] or [L] to
select the desired control “BRIGHTNESS”,
“CONTRAST”, “COLOR”, “TINT” or “SHARPNESS”.
The Sleep Timer function turns off the unit without
using [POWER] after a desired period of time.
1 Press [SLEEP].
PICTURE
BRIGHTNESS
-
+
SLEEP
2 Press [s] or [B] to adjust to your desired
level within 5 seconds.
SLEEP 0 MINUTE
2 Press [SLEEP] repeatedly until the desired
sleep time is displayed.
SLEEP
BRIGHTNESS
COLOR
to decrease
brightness
to decrease
contrast
to pale
to increase
brightness
to increase
contrast
to brilliant
TINT
SHARPNESS
to purple
to soft
to green
to clear
CONTRAST
• Each press increases the time by 10 minutes up
to 90 minutes.
• After 5 seconds, the Sleep Timer setting will
disappear automatically.
• If you select “SLEEP 0 MINUTE”, Sleep Timer
setting is cancelled.
• Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
- 14 -
EN
NOTE
CLOSED CAPTION SYSTEM
• Even if there is a power failure of any
•
MTS (Multi-Channel Television
Sound) System
TO SELECT TV SOUND MODE
1 Press [AUDIO] repeatedly to select the MTS
output mode.
NOTE
Not all programs are broadcast with closed captions. Your unit is designed to provide error free
closed captions from high quality antenna, cable
and VCR signals. Conversely, poor quality signals are likely to result in caption errors or no
captions at all. Common signal conditions which
may cause caption errors are listed below:
– Automobile ignition noise
– Electric motor brush noise
– Weak snowy reception on TV screen
– Multiplex signal reception displaying picture
ghosts or airplane flutter
If the unit displays a black box on the TV
screen, this means that the unit is set to the
TEXT mode. To clear screen, select “CAPTION1”, “CAPTION2” or “OFF”.
AUDIO
STEREO
• The output mode changes as described below
every time you press [AUDIO].
STEREO
SAP*
MONO
* Second Audio Program (SAP):
Sometimes broadcasters add another channel of
audio to the programs they air. This is usually a
secondary language or perhaps a radio station.
• After 5 seconds, the current audio status will
disappear from the TV screen.
NOTE
• The initial setting is “STEREO”.
• This setting is saved even if the unit is turned
off or the AC cord is unplugged.
TO CHECK THE SOUND STATUS
1 Press [SETUP] then press [K] or [L] to point
to “CAPTION”.
By pressing [DISPLAY], the status shown below
will appear on the display when you receive a broadcast on the unit tuner channel you are watching.
- TV SET UP -
CH 123
STEREO/SAP
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION
[OFF]
BACK LIGHT [BRIGHT]
SETUP
3)
2)
1)
2 Press [ENTER] repeatedly to select the
desired caption menu “CAPTION1”, “CAPTION2”, “TEXT1” or “TEXT2”.
- TV SET UP -
ENTER
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION
[CAPTION1]
BACK LIGHT [BRIGHT]
• If you select “OFF”, Closed Caption System setting is cancelled.
1) When a program is broadcast in stereo,
“STEREO” appears on the TV screen.
2) When a program is broadcast in second audio,
“SAP” appears on the TV screen.
3) When a program broadcast both in stereo and second audio, “STEREO/SAP” appears on the TV
screen.
3 Press [SETUP] to exit the menu.
SETUP
- 15 -
TV OPERATION AND SETTINGS
•
kind, the unit will retain its memory for
this feature.
EN
TV SECTION
You can view specially labeled (cc) TV programs,
movies, news and pre-recorded tapes with either a
dialogue caption or text display.
CAPTION mode: You can watch dramas, movies and
news while captioning the dialogues and the contents
of news.
TEXT mode: You can watch half screen text information if you want.
1-2: You may get these captions or text information
by selecting either “1” or “2”. Caption “2” is usually
used for a second language if available.
1
2
A
3
TV RATING SET UP
CH.
4
5
7
8
6
Follow steps 1 to 3 in the V-CHIP SET UP.
4 Press [K] or [L] to select the desired TV rat-
9
VOL.
+100
SLEEP
0
ing to be blocked then press [ENTER] repeatedly to set “BLOCK” or “VIEW”.
+10
SKIP
ZOOM
MUTE
B TV–Y
TV–Y7 (
TV–G
TV–PG (
TV–14 (
TV–MA (
PLAY
REV
FWD
STOP
PAUSE
)
)
)
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
ENTER
DISC
MENU
SLOW
Selection
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
DISPLAY
ENTER
SETUP
)
TITLE
RETURN
• Shaded buttons are used for following operation.
V-CHIP SET UP
V-CHIP SET UP
Rating Category Explanations
Appropriate for all children
Appropriate for children seven and older
General Audience
Parental Guidance suggested.
Unsuitable for children under 14
Mature audience only
NOTE
• When you select a rating and set it to
This feature enables parents to prevent their children
from watching inappropriate material on TV. When
you try to access a program which is blocked, “PROTECTED PROGRAM by ...” message appears on
the TV screen.
“BLOCK”, the higher ratings will be blocked
automatically. The lower ratings will be available for viewing.
TV–Y
TV–Y7 (
)
B TV–G
TV–PG (DLSV )
TV–14 (DLSV )
TV–MA ( LSV )
1 Press [SETUP] then press [K] or [L] to point
to “V-CHIP SET UP”.
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
- TV SET UP -
CHANNEL SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
SETUP
• When you set the lowest rating to “VIEW”, all
other ratings will automatically be available
for viewing.
2 Press [ENTER] then press the Number
5 When you select the ratings of TV-Y7, TV-PG,
Buttons to enter the access code.
ACCESS CODE
ENTER
_ _ _ _
1
4
7
2
5
8
TV-14 or TV-MA you will have the option of
setting sub rating categories.
Press [K] or [L] to select a rating with subratings you wish to block, then press
[ENTER] twice.
Press [K] or [L] to select a sub-rating, then
press [ENTER] to set it to “BLOCK” or “VIEW”.
3
6
9
0
• For the first time set-up or in the event the unit
has lost power, enter the default code of 0000.
Selection
Rating Category Explanations
TV-Y7
FV
Fantasy Violence
TV-PG, TV-14, TV-MA
D
Suggestive Dialog (TV-PG, TV-14 only)
L
Coarse Language
S
Sexual Situation
V
Violence
3 Press [K] or [L] to select “TV RATING”,
“MPAA RATING” or “CHANGE CODE” then
press [ENTER].
– V-CHIP SET UP –
B TV RATING
MPAA RATING
CHANGE CODE
ENTER
TV RATING:
See A TV RATING SET UP
MPAA RATING: See B MPAA RATING SET UP
CHANGE CODE: See C CHANGE ACCESS CODE
NOTE
• The blocked sub-ratings will appear next to
the rating category in the “TV RATING”
menu.
- 16 -
EN
6 Press [SETUP] to exit the menu.
• Make sure you enter exactly the same new code
in the “CONFIRM CODE” space as one in the
“NEW CODE” space. If they are different, the
“NEW CODE” space is cleared for redoing.
SETUP
NOTE
SETUP
to an unprotected program. If “PROTECTED PROGRAM by ...” appears on the
screen, please change the channel to a station
that is not protected.
MPAA RATING SET UP
Follow steps 1 to 3 in the V-CHIP SET UP on page
16.
4 Press [K] or [L] to point to your desired item,
then press [ENTER] to select “BLOCK” or
“VIEW”.
G
PG
PG–13
B R
NC–17
X
MENU LANGUAGE
1 Press [SETUP] then press [K] or [L] to point
to “LANGUAGE”.
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
- TV SET UP -
ENTER
Selection
G
PG
PG-13
R
NC-17
X
Rating Category Explanations
General Audience
Parental Guidance suggested.
Unsuitable for children under 13
Restricted; under 17 requires accompanying parent or adult guardian
No one under 17 admitted
Mature audience only
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION
[OFF]
BACK LIGHT [BRIGHT]
2 Press [ENTER] repeatedly to select
“ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French.
ENTER
3 Press [SETUP] to exit the menu.
• When you select a rating and set it to “BLOCK”,
the higher ratings will be blocked automatically.
The lower ratings will be available for viewing.
• When you set the lowest rating to “VIEW”, all other
ratings will automatically be available for viewing.
5 Press [SETUP] to exit the menu.
SETUP
C
TV SECTION
B
NOTE
• Your personal access code will be erased and
will return to the default (0000) when a
power failure occurs or when you turn off the
power using a wall switch. If you have forgotten the code, unplug the power cord for 10
seconds to restore the access code to 0000.
CHANGE ACCESS CODE
SETUP
NOTE
This
function effects only the language on the
•
screen menu and not the audio source.
• If for some reason the menu is in Spanish or
French, press [SETUP], press [K] or [L] to
point to “IDIOMA [ESPAÑOL]” or “LANGAGE [FRANÇAIS]”, then press [ENTER]
repeatedly to select desired language, then
press [SETUP].
Follow steps 1 to 3 in the V-CHIP SET UP on page
16.
4 Press the number buttons to enter your
desired access code in the “NEW CODE”
space, then enter the same code in the
“CONFIRM CODE” space. When completed,
the menu will return to “V-CHIP SET UP”.
1
4
7
2
5
8
3
6
9
TV OPERATION AND SETTINGS
5 Press [SETUP] to exit the menu.
• To change the rating, the TV must be turned
NEW CODE
XXXX
CONFIRM CODE
_ _ _ _
0
- 17 -
EN
DVD SECTION
ABOUT THE DISCS
PLAYABLE DISCS
Playable
discs
DVD-Video
* 1,2,4,6,10,11
DVD-RW
DVD-R
* 1,3,4,5,
6,7,9,10
DVD+RW
DVD+R
* 1,3,4,5,
6,8,9,10
Audio CD
* 4,6,10
Mark (logo)
Region code
Recorded
signals
Disc size
Disc type
or
Example
-
Title 1
Digital video 5 inches
(MPEG2)
(12cm)
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
-
-
Digital audio
Audio CD
Example
Track 1 Track 2 Track 3 Track 4 Track 5 Track 6
5 inches
(12cm)
CD-RW
CD-R
* 4,5,6,9,10
-
MP3
Digital audio
or
MP3
Example
Group 1
Group 2
Track 1 Track 2 Track 3 Track 4 Track 5 Track 6
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However, depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,
etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be
played back at all or normally (the picture or sound may not be smooth, etc.).
*9: If there is too much recording space left on a disc (the used portion is less than 2-3/16" (55mm) across), it may not play back properly.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it correctly.
*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region format can only be played back on unit with the same region code.
UNPLAYABLE DISCS
• NEVER play back the following discs. Otherwise, the unit may result in malfunction.
•
•
DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL /
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers
Never insert a disc which is broken or whose form is abnormal (other than 5 inch (12cm) round disc).
On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE
Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
• Any other discs without compatibility indications
– 18 –
EN
PLAYING A DISC
POWER PICTURE SELECT
NOTE
EJECT
• When the DVD mode has been switched to the
TV mode, the DVD mode shuts down first and
then the TV picture and sound appears in about
4 seconds. Similarly, when [POWER] is press
to turn off in the DVD mode, this mode shuts
down first and then the unit is turned off.
• “ ” may appear at the top-right on the TV
screen during operation, warning that a prohibited operation has been encountered by the
DVD or the disc.
• With DVDs that use titles for playback program signals, playback may start from the
second title or it may skip these titles.
• During the playback of a two layered disc,
pictures may stop for a moment. This happens
when the 1st layer switches to the 2nd layer.
This is not a malfunction.
3
SKIP
ZOOM
MUTE
PLAY
REV
FWD
STOP
PAUSE
DISC
MENU
SLOW
DISPLAY
ENTER
SETUP
TITLE
RETURN
• Shaded buttons are used for following operation.
BASIC PLAYBACK
MP3 PLAYBACK
GETTING STARTED
1 In stop mode, press [DISC MENU], then press
DISC
MENU
folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3
POWER
folder name 1
2 Open the disc door manually.
• If a group is selected, press [B] or [ENTER] to go
on to the track selection screen. Press [s] to go
back to previous screen.(except for the top page.)
• If a track is selected, press [ENTER] to start
playing tracks. Starting from the one you’ve just
chosen the subsequent tracks will be played.
• If the entire file list cannot be displayed at once
on a screen, “n” appears to go to the next page.
• Press [TITLE] to return to the top file of the
highest hierarchy in the program and file list.
3 Insert a disc with the label facing back of the unit to
start playing it. By simply placing the disc gently into
the slot, it will be loaded automatically.
2 Press [STOP C] to stop playback.
STOP
NOTE
• Playback will start from the first chapter/track of the disc.
• If the playback does not start automatically,
press [PLAY O].
• When you playback a DVD which features a
title menu, it may appear on the screen. In this
case, refer to “TITLE MENU” on page 20.
4 Press [STOP C] to stop playback.
STOP
5 Press [EJECT A] to remove the disc from the unit.
• Folders are known as Groups; files are known as Tracks.
• MP3 files are accompanied by icon.
• Maximum of 255 folders can
be recognized.
• Maximum of 999 files can be recognized.
• Up to 8 hierarchies can be created.
3
This unit recommends the use of files recorded
at the below specifications:
• Sampling frequency: 44.1kHz or 48kHz
• Constant bit rate: 32kbps ~ 320kbps
• For MP3 file recorded in Variable Bit Rate (VBR),
the unit may not display the actual elapsed time.
EJECT
– 19 –
EN
DVD SECTION
1 Press [POWER] then the power will turn on.
ABOUT THE DISCS / PLAYING A DISC
K] or [L
L] to select the desired group or track.
[K
Turn on the power of amplifier and any other components, if necessary.
DISC MENU
RESUME
1 Press [DISC MENU].
1 During playback, press [STOP C].
DISC
MENU
• The DVD main menu will appear.
symbol may
• If the feature is not available,
appear on the TV screen.
• If disc menu is available on the disc, audio lan-
Resume ON
STOP
guage, subtitle options, chapters for the title and
other options will appear for selection.
(Example: DVD or Audio CD)
Resume
message
will appear on the TV screen.
•
2 Press [K], [L], [s] or [B] to select an item
and press [ENTER] to confirm selection.
Press ’PLAY’ to play from here.
To play the beginning,
press ’STOP’ first and then ’PLAY’.
2 Press [PLAY O], playback will resume from
the point at which playback was stopped.
ENTER
PLAY
• To cancel resume, press [STOP C] twice.
• For MP3, playback will resume from the begin-
TITLE MENU
ning of the current track.
• The resume information stays on even when the
power is turned off.
1 Press [TITLE].
PAUSE
TITLE
• The title menu will appear.
• If the feature is not available,
symbol may
appear on the TV screen.
2 Press [K], [L], [s] or [B] to select an item
1 During playback, press [PAUSE F].
PAUSE
then press [ENTER] to confirm selection.
• Playback will pause and sound will be muted.
ENTER
2 To continue playback, press [PLAY O].
PLAY
CALLING UP A MENU SCREEN
DURING PLAYBACK
Press [DISC MENU] to call up the DVD menu or
press [TITLE] to call up the title menu.
NOTE
• Contents of menu and corresponding menu
operations may vary between discs. Refer to
the manual accompanying the disc for details.
STEP BY STEP PLAYBACK
1 During playback, press [PAUSE F].
PAUSE
• Playback will pause and sound will be muted.
2 The disc goes forward by one frame each
time [PAUSE F] is pressed.
PAUSE
3 To exit step by step playback, press [PLAY O].
PLAY
– 20 –
EN
FAST FORWARD /
FAST REVERSE
ZOOM
The Zoom function allows you to enlarge the video
image and to pan through the enlarged image.
1 During playback, press [FWD g] or
[REV h].
REV
1 Press [ZOOM] during playback.
FWD
ZOOM
SLOW
• Playback will continue.
• “ g 1” or “h 1” appears on the screen.
2 Press [ZOOM] repeatedly to select the
2 To select another speed, repeat step 1 until
required zoom factor: ZOOM1, ZOOM2,
ZOOM3 or OFF.
your required speed number appears on the
screen.
ZOOM
• For DVDs, fast forward/reverse search speed is
different depending on the disc. Approximate
speed is 1(×2), 2(×8), 3(×20), 4(×50) and
5(×100).
• For Audio CDs and MP3 approximate speed is
1(×2), 2(×8) and 3(×30).
3 Press [K], [L], [s] or [B] to move the
zoomed picture across the screen.
3 To return to normal playback, press [PLAY O].
PLAY
4 To exit zoom mode, press [ZOOM] to OFF.
NOTE
Zooming
function does not work while disc
•
menu is shown.
• Zooming function is not available on some
discs.
• It may take several seconds to slide the
zoomed picture.
• The picture may be distorted if you operate
other functions repeatedly (ex. [PAUSE F] or
[REV h], etc.) in the zoom mode.
1 During playback, press [PAUSE F].
PAUSE
2 Press [FWD g] or [REV h].
REV
FWD
SLOW
•“
1” or “
1” appears on the screen.
3 To select another speed, repeat step 2 until
DVD SECTION
your required speed number appears on the
screen.
• Slow forward or reverse speed varies with the
disc. Approximate speed is 1(1/16), 2(1/8) and
3(1/2).
4 To return to normal playback, press [PLAY O].
PLAY
– 21 –
PLAYING A DISC
ZOOM
SLOW FORWARD /
SLOW REVERSE
EN
SEARCH FUNCTION
1
2
2 Within 30 seconds, select the desired track
3
number using the Number buttons.
CH.
4
5
6
7
8
9
VOL.
+100
SLEEP
0
1
4
7
+10
SKIP
2
5
8
3
6
9
0
ZOOM
MUTE
• To select single-digit track number, press [0]
first if the total number of track in the disc is 10
or more. (e.g. Press [0] [3] for track number 3.)
• Playback will start at the selected track.
PLAY
REV
FWD
STOP
PAUSE
DISC
MENU
SLOW
Using [SKIP H / G ]
DISPLAY
During playback, press [SKIP G] to move the next
track. Press it repeatedly to skip subsequent tracks.
Press [SKIP H] to go back to beginning of the current track. Press it repeatedly to go to the previous
tracks.
• If [SKIP H / G] is pressed while the playback is paused, the playback will be paused
again after skipping to the next track.
ENTER
SETUP
TITLE
RETURN
CLEAR SEARCH MODE REPEAT
A-B
• Shaded buttons are used for following operation.
TRACK SEARCH
NOTE
[SKIP
H / G] are not operative when
•
playback is stopped.
There are three ways to begin playback on an Audio
CD and MP3 at a specific track.
TITLE / CHAPTER SEARCH
Using the number buttons
1 Press the Number buttons to enter the
1 Press [SEARCH MODE] once for the Chapter
desired track number.
1
4
7
2
5
8
search, twice for the Title search during playback.
3
6
9
+100
0
SEARCH MODE
+10
• Playback will start at the selected track.
• To select single-digit track number, press single
number. (e.g. Press [3] for track number 3.)
• To select track numbers which are higher than 9,
press [+100/+10] first.
(e.g. Press [+100/+10] [2] [5] for track number
25.)
once
_/2
2 Within 30 seconds, enter the desired chapter/
title number using the Number buttons.
1
4
7
2
5
8
3
6
9
0
Using [SEARCH MODE]
• Playback will start at the selected chapter or
1 Press [SEARCH MODE].
• Press [CLEAR] to erase the incorrect input.
• To select single-digit chapter/title number, press
title.
SEARCH MODE
[0] first if the total number of chapter/title in the
disc 10 or more. (e.g. Press [0] [2] for
chapter/title 2.)
• The track search display appears.
– 22 –
EN
TIME SEARCH
MARKER SETUP SCREEN
1 During playback, press [SEARCH MODE]
Use markers to memorize your favorite places on a disc.
repeatedly to display the Time Search on the
TV screen.
SEARCH MODE
repeatedly
1 Press [SEARCH MODE] repeatedly during
playback to display the Marker screen.
_:_ _:_ _ TOTAL 1:29:00
SEARCH MODE
2 Within 30 seconds, enter a desired disc time
2
5
8
_ _ _ _:_ _:_ _
2 Press [s] or [B] to select 1, 2, 3, 4, 5, 6, 7,
using the Number buttons.
1
4
7
1 2 3 4 5 6 7 8 9 10 AC
repeatedly
8, 9, or 10 and ensure that “- - - - : - - : - -”
appears in the display.
3
6
9
0
3 When you reach the desired point, press
[ENTER].
ENTER
appears automatically. For example,
“ 0 : 0 - : - -” appears in the Time Search display
if the total time of the track or title is less than
10 minutes.
• The Title or Track and elapsed playing time will
appear in the TV screen.
4 To return to the Marker later, press [SEARCH
MODE] repeatedly during playback to display
the Marker screen. Then press [s] or [B] to
choose the desired marker, then press
[ENTER].
SEARCH MODE
repeatedly
ENTER
– Turning off the power.
– Ejecting a disc.
– Pressing [SELECT].
– Selecting “AC” at step 2 and pressing [ENTER].
• To clear a marker:
– Press [s] or [B] to select a cursor on to
the marker number and press [CLEAR].
• You can mark up to 10 points.
5 Press [SEARCH MODE] or [RETURN] to
exit.
SEARCH MODE
– 23 –
SEARCH FUNCTION
NOTE
• Operations which erase all Markers:
DVD SECTION
• Playback will start at the specified time.
• Press [CLEAR] to erase the incorrect input.
• When there is no need to enter a number, “0”
EN
SPECIAL PLAYBACK FUNCTION
For MP3
PLAY
REV
FWD
1 Press [REPEAT] during playback.
STOP
PAUSE
DISC
MENU
SLOW
REPEAT
DISPLAY
• The repeat mode changes as described below
ENTER
SETUP
TITLE
RETURN
CLEAR SEARCH MODE REPEAT
A-B
AUDIO
ANGLE
MODE
SUBTITLE
every time you press the button.
TRACK
(current track
repeat)
• Shaded buttons are used for following operation.
GROUP
(current group
repeat)
ALL
(entire disc
repeat)
OFF
(repeat off)
NOTE
Repeat
setting will be cleared when moving
•
to other track.
REPEAT
REPEAT is available only during playback.
A-B REPEAT
For DVD-Vs
1 To activate the repeat function, press
[REPEAT] during playback.
1 Press [A-B] at your chosen starting point.
REPEAT
A-B
• The repeat mode changes as described below
•“
every time you press the button.
CHAPTER
TITLE
(current chapter repeat) (current title repeat)
OFF
(repeat off)
A-” appears briefly on the TV screen.
2 Press [A-B] again at your chosen end point.
A-B
•“
A-B” appears briefly on the TV screen, and
the repeat sequence begins.
NOTE
• Repeat Title/Chapter is not available with
some scenes.
• The REPEAT setting will be cleared when
moving to other title or chapter.
3 To exit the sequence, press [A-B].
A-B
NOTE
• The A-B repeat section can only be set within
the current title (for DVDs) or current track
(for Audio CDs).
• A-B repeat is not available with some scenes in DVD.
• To cancel the A point which was set, press
[CLEAR].
• A-B repeat playback does not function during
title, chapter, track or all repeat playback.
For CDs
1 To activate the repeat function, press
[REPEAT] during playback.
REPEAT
• The repeat mode changes as described below
every time you press the button.
TRACK
(current track repeat)
ALL
(entire disc repeat)
OFF
(repeat off)
NOTE
• Repeat setting will be cleared when moving
to other track.
• Repeat playback does not function during AB repeat playback.
– 24 –
EN
PROGRAM
RANDOM PLAYBACK
You may determine the order in which tracks will play.
1 In stop mode, press [MODE].
This function shuffles the playing order of tracks
instead of playback in the sequence.
1 In stop mode, press [MODE] twice.
MODE
RANDOM
• The “PROGRAM” screen will appear.
CD-DA
MODE
2 Press [▲ ] or [▼] to select a track, then press
[ENTER].
twice
TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
PLAY
• “RANDOM” screen appears.
TOTAL 1:03:30
1
5
10
11
12
17
22
1/4
3:30
5:10
4:20
3:00
3:20
4:10
2:50
2/3
2 Press [PLAY O] to start random playback.
ENTER
PLAY
NOTE
• Press [CLEAR] to erase the most recently
entered track.
If
• the entire Program cannot be displayed at
once on a screen, “ G” appears to go to the next
page and “ H” appears to go back to the previous page.
While an MP3 folder is open:
• Press [ B] when you want to go to the next
hierarchy.
• Press [s ] when you want to go back to the
previous hierarchy.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
• If you like to repeat the current track in the random selection, press [REPEAT] several times
until “
TRACK” appears during playback. If
you like to repeat the entire random selection
press [REPEAT] several times until “
ALL”
appears during playback.
SPECIAL PLAYBACK FUNCTION
4 Press [PLAY O] to play the programmed tracks.
PLAY
NOTE
• While the program is being played back,
pressing [STOP C] works as follows.
• Press [STOP C] once and then [PLAY O]
DVD SECTION
again, playback will restart from the point where
[STOP C] was pressed (MP3: from the beginning of the current track). (Program continued)
• Press [STOP C] twice and then [PLAY O]
again, playback will restart from the track in
the usual way. (Program canceled)
• Up to 99 tracks can be entered.
• To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
• If you like to repeat the current track in the
program, press [REPEAT] several times until
“
TRACK” appears during playback. If you
like to repeat the entire program press
[REPEAT] several times until “
ALL”
appears during playback.
– 25 –
EN
CHANGING THE SETTINGS
DISPLAY
AUDIO LANGUAGE
ENTER
SETUP
TITLE
RETURN
CLEAR SEARCH MODE REPEAT
A-B
AUDIO
ANGLE
MODE
SUBTITLE
The unit allows you to select a language during DVD
disc (if multi languages are available) playback.
• Shaded buttons are used for following operation.
1 Press [AUDIO] during playback.
SUBTITLE LANGUAGE
AUDIO
1.ENG Dolby D 3/2.1ch 48k/3
2 Press [AUDIO] repeatedly to select your
The unit allows you to select a language for subtitles
during DVD disc (if available) playback.
desired language.
AUDIO
1 Press [SUBTITLE] during playback.
NOTE
• Pressing [AUDIO] may not work on some
1.ENG/6
DVDs with multiple audio languages (e.g.
DVDs which allow audio language setting on
the disc menu).
SUBTITLE
• The subtitle language will appear on the display
bar at the top of the TV screen.
2 Press [SUBTITLE] repeatedly to select your
STEREO SOUND MODE
desired subtitle language.
SUBTITLE
3 To turn off subtitles, press [SUBTITLE]
repeatedly until “OFF” appears.
1 Press [AUDIO] repeatedly during playback to
select between “STEREO”, “L-ch” or “R-ch”.
SUBTITLE
AUDIO
STEREO
NOTE
• Pressing [SUBTITLE] may not work on
• STEREO - both right and left channels are
some DVDs with multiple subtitle languages.
In this case, set it on the disc menu.
(Operation varies between discs Refer to the
manual of the disc.)
• If the desired language is not shown after
pressing [SUBTITLE] several times, the disc
does not have subtitles in that language.
• When “NOT AVAILABLE” appears on the TV
screen, it means no subtitle is recorded on the
scene.
active (stereo)
L-ch - only left channel is active
R-ch - only right channel is active
NOT AVAILABLE
• If you choose a language that has a 3 letter
language code, the code will be displayed
every time you change the Subtitle language
setting. If you choose any other languages,
“---” will be displayed instead. (Refer to page
29.)
– 26 –
EN
CAMERA ANGLE
VIRTUAL SURROUND
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle when the “
” icon appears on the
screen.
You can enjoy surround-sound effect over two speakers on this unit.
1 Press [MODE] repeatedly during playback
then press [ENTER] to set it “1”, “2” or “OFF”.
1 Press [ANGLE] during playback.
MODE
1/8
OFF
repeatedly
ENTER
ANGLE
1: Natural effect
2: Emphasized effect
OFF: Original Sound
• The selected angle will be displayed on the display bar at the top of the screen.
• If the “ANGLE ICON” setting is “OFF” in the
“OTHERS” menu, the “
” icon will not
appear. (Refer to page 31.)
2 Press [MODE] to exit.
MODE
2 Press [ANGLE] repeatedly to select your
• You can also exit the menu by pressing
desired angle.
[RETURN].
ANGLE
NOTE
For CD play only:
• Virtual Surround will not be effective if the
sound mode is set to something other than
STEREO. (Refer to “STEREO SOUND
MODE” on pge 26.)
BLACK LEVEL SETTING
CHANGING THE SETTINGS
Adjust the Black Level Settings to make the black
parts of the picture brighter.
1 Press [MODE] during playback then press
[ENTER] to switch “ON” or “OFF”.
OFF
MODE
ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
(Initial setting)
2 Press [MODE] twice or [RETURN] to exit.
twice OR
RETURN
DVD SECTION
MODE
NOTE
• The setting will be saved even if the unit is
turned off.
– 27 –
EN
THE ON-SCREEN INFORMATION
2 Press [DISPLAY] again to show current Total
DISPLAY
ENTER
SETUP
TITLE
Track.
RETURN
4/12 0:13:45 - 0:45:40
• Shaded buttons are used for following operation.
T
Current repeat setting appears only
when the repeat setting is active
T: Track repeat
A: All Tracks repeat
A B: A-B repeat
Remaining time of the entire disc
Elapsed time of the entire disc
You can check the information about the current disc
by pressing [DISPLAY].
For DVD-Vs
ALL:
Current track number / Total tracks
3 Press [DISPLAY] again to exit.
1 Press [DISPLAY] during playback to show
current Chapter.
Angle icon, appears only when available on the DVD
Current playback status
NOTE
• When you are playing a disc in PROGRAM
11/16 0:00:00 - 0:03:30
Remaining time of the current chapter
or RANDOM mode, “ PROGRAM” (or
RANDOM) will be displayed at step 2.
Elapsed time of the current chapter
CH(Chapter):
Current chapter number / Total chapters
2 Press [DISPLAY] again to show current Title.
1/3
For MP3
0:00:00 - 1:23:45
1 Press [DISPLAY] during playback.
Remaining time of the current title
Current playback status
Elapsed time of the current title
3
TRACK 01
TT(Title):
Current title number / Total titles
The name of the file currently in play
will be displayed.
3 Press [DISPLAY] again.
T
2 Press [DISPLAY] again.
L1
Layer numbers, appears only when
playing a two-layered Disc
L0: Layer 0 is playing
L1: Layer 1 is playing
1/36 0:01:15
T
Current repeat setting appears only
when the repeat setting is active
C: Chapter repeat / T: Title repeat /
A B: A-B repeat
TR(Track):
Current track number / Total tracks
Current repeat setting, if active
T: Track repeat
G: Group (folder) repeat
A: Disc repeat
Elapsed playing time of the current
track
3 Press [DISPLAY] again to show the current-
BIT RATE: The amount of audio and
video data currently being read
playback mode.
4 Press [DISPLAY] again to exit.
(Only when you are playing a disc in PROGRAM or
RANDOM mode.)
PROGRAM
RANDOM
or
4 Press [DISPLAY] again to exit.
For Audio CDs
1 Press [DISPLAY] during playback to show the
current Track.
Current playback status
4/12 0:03:21 - 0:02:15
T
Remaining time of the current track
Elapsed time of the current track
TR(Track):
Current track number / Total tracks
– 28 –
EN
CHANGING THE DVD SET UP ITEMS
D
DISPLAY
LANGUAGE SETTING
ENTER
Follow steps 1 to 2 in the CUSTOM MENU .
RETURN
3 Press [K] or [L] to select the desired item
• Shaded buttons are used for following operation.
then press [ENTER].
SETUP
CUSTOM MENU
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ORIGINAL
OFF
ENGLISH
ENTER
You can change the DVD player’s settings.
AUDIO: Sets the audio language.
SUBTITLE: Sets the subtitle language
DISC MENU: Sets the language for DVD menu.
1 In stop mode, press [SETUP] twice, [L] to
select “CUSTOM” then press [ENTER].
SETUP
4 Press [K] or [L] to select a setting then press
twice
[ENTER].
SETUP
SETUP
QUICK
CUSTOM
INITIALIZE
LANGUAGE
AUDIO
ORIGINAL
ENGLISH
FRENCH
ENTER
NOTE
• If the menu does not appear, press [PLAY O]
first, then press [STOP C]. Make sure the
disc is in stop mode, then slowly press
[SETUP] twice.
SETUP
ENTER
LANGUAGE
SUBTITLE
OFF
ENGLISH
FRENCH
SETUP
LANGUAGE
DISC MENU
ENGLISH
FRENCH
SPANISH
2 Press [K] or [L] to select the desired item
then press [ENTER] to confirm.
SETUP
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
• If “OTHER” is selected on the “AUDIO”, “SUBTITLE” or “DISC MENU” screen, press fourdigit number to enter the code for the desired
language.
• Only the languages supported by the disc can be
selected.
CUSTOM
ENTER
Refer to the pages below to set up each item.
LANGUAGE: See D LANGUAGE SETTING
DISPLAY:
See E DISPLAY SETTING
AUDIO:
See F AUDIO SETTINGS
PARENTAL: See G PARENTAL CONTROL
OTHERS:
See H OTHER SETTINGS
5 Press [SETUP] to exit the menu.
SETUP
NOTE
THE ON-SCREEN INFORMATION / CHANGING THE DVD SET UP ITEMS
TITLE
• Language Setting for Audio and Subtitle are
not valid for some discs due to default setting
of the disc. In this case, set them by pressing
[AUDIO] and [SUBTITLE]. (Refer to page
26.)
• If you select a language that is not supported
by the disc, subtitle will automatically be set
OFF and the first item of the audio languages
will be automatically set.
– 29 –
EN
DVD SECTION
SETUP
E
F
DISPLAY SETTING
Follow steps 1 to 2 in the CUSTOM MENU on
page 29.
3 Press [K] or [L] to select the below items then
press [ENTER].
SETUP
TV MODE
STILL MODE
Follow steps 1 to 2 in the CUSTOM MENU on
page 29.
3 Press [K] or [L] to select the below items then
DISPLAY
4:3 LETTER BOX
AUTO
AUDIO SETTINGS
Choose the appropriate Audio settings for your equipment as it only affects during the playback of DVD
discs.
press [ENTER].
ENTER
SETUP
TV MODE: QUICK
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
SETUP
SETUP
on top and bottom of the screen.
DOWN SAMPLING:
with both sides trimmed.
SETUP
STILL MODE:
This function allows you to adjust picture resolution and quality in the still mode.
ON
ON
BITSTREAM
• ON : Output in 48 kHz. (default)
• OFF : Output the original sound.
4:3 LETTER BOX
AUTO
When playing disc with copyright Protection
• If you select “OFF”, copyright protection will be
activated and sound will be down sampled at
48kHz.
• AUTO (default): Automatically select the best
resolution setting (FRAME or FIELD) based on
the data characteristics of the pictures.
• FIELD: Select “FIELD” when the pictures are
still unstable even if “AUTO” is selected.
FIELD stabilizes the pictures, although the picture quality may become coarse due to the limited amount of data.
• FRAME: Select “FRAME” to display relatively
motionless pictures in higher resolution.
FRAME improves the picture quality, although it
may unstabilizethe pictures due to simultaneous
output of two field data.
SETUP
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DISPLAY
4 Press [SETUP] to exit the menu.
ON
ON
BITSTREAM
• To compress the range of soft to loud sound.
• The default setting is “ON”.
• 4:3 PAN & SCAN: To show a full height picture
TV MODE
STILL MODE
ENTER
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
4:3 LETTER BOX
AUTO
• 4:3 LETTER BOX (default): To show black bars
SETUP
ON
ON
BITSTREAM
DRC (Dynamic Range Control):
DISPLAY
TV MODE
STILL MODE
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DOLBY DIGITAL: QUICK
Set to “BITSTREAM” when the unit is connected
to a Dolby Digital Decoder.
SETUP
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
• BITSTREAM: Output a Dolby Digital signal
(default)
• PCM: Convert the Dolby Digital to PCM
(2 channel stereo)
4 Press [SETUP] to exit the menu.
SETUP
QUICK MENU
•
You can select the “TV MODE” or “DOLBY DIGITAL” from the QUICK menu quickly. To access the
QUICK menu, select “QUICK” instead of “CUSTOM” at step 1 on page 29.
TV SET UP MENU IN DVD MODE
•
You can access the TV SETUP menu by pressing [SETUP] from the DVD mode, and select only
“LANGUAGE” and “BACK LIGHT”.
– 30 –
EN
G
CONTROL LEVELS
PARENTAL CONTROL
Parental Control limits the disc viewing that exceed
your setting (with a password or playback will stop).
This feature allows you to prevent discs with alternative scenes from being played by your children.
• ALL
All parental lock is cancelled.
• Level 8
DVD software of any grade (adult/general/children)
can be played back.
PARENTAL LEVEL
• Levels 7 to 2
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc’s ratings exceed the level you set.
• Level 1
Only DVD software intended for general use and
children can be played back.
Only DVD software intended for children can be
played back, with those intended for adult and general use prohibited.
Follow steps 1 to 2 in the CUSTOM MENU on
page 29.
3 Enter your four-digit password then press
H
[ENTER].
SETUP
1
4
7
PARENTAL
PASSWORD
Enter current password.
2
5
8
3
6
9
OTHER SETTINGS
Follow steps 1 to 2 in the CUSTOM MENU on
page 29.
ENTER
3 Press [K] or [L] to select the below items then
0
press [ENTER].
• Press [4], [7], [3], [7] then enter your password
SETUP
if you forget the password.
OTHERS
ANGLE ICON
SCREEN SAVER
4 Press [K] or [L] to select “PARENTAL LEVEL”
ON
OFF
ENTER
then press [ENTER].
ANGLE ICON:
PARENTAL
PARENTAL LEVEL
ALL
PASSWORD CHANGE
• Press [ENTER] repeatedly to turn Angle icon
ENTER
“ON” or “OFF”.
• The default setting is “ON”.
SCREEN SAVER:
• Press [ENTER] repeatedly to turn Screen Saver
“ON” or “OFF”.
• The default setting is “OFF”. If you select “ON”,
the screen saver program starts when there is no
input from the unit for 5 minutes in stop mode.
5 Press [K] or [L] to select the desired level
then press [ENTER].
SETUP
PARENTAL
PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]
ENTER
6 Press [SETUP] to exit the menu.
4 Press [SETUP] to exit the menu.
SETUP
SETUP
DVD SECTION
NOTE
When
doing this for the first time, enter any 4
•
digits. (except for 4737) That number will be
used as the password. (in the event you forget
the password, see below)
• To change the password, press [K] or [L] to
select “PASSWORD CHANGE” at step 4
then press [ENTER]. Enter the four-digit
password, then press [ENTER].
• With some DVDs, it may be difficult to find
if they are compatible with parental lock. Be
sure to check if the parental lock function
operates in the way that you have set.
• Record the password in case you forget it.
CHANGING THE DVD SET UP ITEMS
SETUP
– 31 –
EN
DISPLAY
ENTER
SETUP
TITLE
RETURN
• Shaded buttons are used for following operation.
INITIALIZE
This allows you to return all selections of SETUP
(except for “PARENTAL” and menu language) to
their default settings.
1 Press [SETUP] twice in stop mode so that the
“INITIALIZE” menu appears.
SETUP
2 Press [K] or [L] to select “INITIALIZE” then
press [ENTER].
SETUP
QUICK
CUSTOM
INITIALIZE
ENTER
3 Press [K] or [L] to select “YES” then press
[ENTER] twice.
SETUP
INITIALIZE
Initialize?
NO
YES
ENTER
twice
All the settings (except for “PARENTAL” and
menu language) will be cleared.
• To cancel the initialization, select “NO”.
4 Press [SETUP] to exit the menu.
SETUP
– 32 –
EN
TROUBLESHOOTING GUIDE
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, consulting the following checklist.
PROBLEM
No power
No operation by infrared remote
control
CORRECTIVE ACTION
Make
sure
the
power
plug is connected to an AC outlet.
•
Make
sure
the
power
is turned on.
•
• Check if the power plug is connected to an AC outlet.
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote control.
• You have to be within 23 feet of the unit.
• Check if the correct mode is selected. If not switch the mode by
pressing [SELECT], whichever you need.
TV Mode
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
possibilities. Before arranging for service, check these items. It could save your time and money.
PROBLEM
No picture or sound
No picture or poor picture on the
unit
No sound or poor sound
Bars On Screen
Picture Distorted or Blurred
Picture Rolls Vertically
Lines or Streaks in Picture
No Color
Poor Reception on Some Channels
Ghosts in Picture
Weak Picture
CORRECTIVE ACTION
• Make sure the AC cord is connected to an AC outlet.
• Check antenna connection.
• Press [SELECT] to select TV mode.
Then try other TV feature.
• Let the unit program its tuner memory.
• Adjust direction or replace antenna.
• Adjust picture controls.
• Check for broken pin of the antenna cable.
• Adjust volume control on remote control or main unit.
• Press [MUTE] to restore sound.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Try a new channel, if OK, then possible station trouble.
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust “COLOR” control.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Adjust “CONTRAST” & “BRIGHT” control.
– 33 –
EN
PROBLEM
Sound OK, Picture Poor
Picture OK, Sound Poor
No operation by infrared Remote
Control
Different color marks on screen
CORRECTIVE ACTION
• Try a new channel, if OK, then possible station trouble.
• Is antenna connected to jack on the back of the set?
• If outside antenna is being used, check for broken wire.
• Check for local interference.
• Adjust “CONTRAST” & “BRIGHT” control.
• Try a new channel, if OK, then possible station trouble.
• Check for local interference.
• Make sure the AC cord is connected to an AC outlet.
• Check batteries in remote control.
• Magnetism from nearby appliances and geomagnetism might affect
the color of the TV picture. Move the unit away from the appliances,
the unit can repair itself automatically. If you want to repair immediately, unplug the power cord, then plug it in again 30 minutes later or
so. This automatically resets the unit.
CLOSED CAPTION PROBLEM
POSSIBLE REMEDY
Misspelling in captions
• Error committed by the closed captioning production company.
• Possible in a live broadcast. Not in case of a prerecorded program.
Text is not shown in its entirety or
• A few seconds of delay is common for live broadcast.
a delay occurs from what is being
• Display capacity may not exceed 220 words per minute. If a dialogue
said.
• exceeds that rate, selective editing is used to insure that the captions
• remain up-to-date with the current TV screen dialogue.
Captions scrambled with white
• Caused by interferences of building, power lines, thunderstorms, etc.
boxes
No captions in a program which
• The broadcast may use a time compression process to speed up the
must contain closed caption
• program. The decoder cannot read the compressed information and
• captions will be lost.
Black box in the TV screen
• You are in TEXT mode. Select a CAPTION mode (“C1”, “C2”) or
• Caption “OFF”.
– 34 –
EN
DVD Mode
PROBLEM
CORRECTIVE ACTION
• Insert a correct video disc that plays on this unit.
• Press [SELECT] to select DVD mode, then try other DVD feature.
• Insert the disc.
Disc cannot be played
• Clean the disc.
• Place the disc correctly, with the label side up.
• Cancel the parental lock or change the control level.
• Connect the audio cables firmly.
No sound
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
• This unit does not support DTS audio. This is not a malfunction.
No DTS audio is output
• There are some cases where pictures may be slightly distorted, which
Distorted picture
are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language
• The selected language is not available for audio or subtitles on the
does not match the set up
DVD. (This is not a malfunction.)
The camera angle cannot be changed • The DVD does not contain sequences recorded from different camera
angles. (This is not a malfunction.)
Audio or subtitle language cannot be • The DVD does not contain audio source or subtitles in the selected
changed
language. (This is not a malfunction.)
“Prohibited icon” appears on the
• That operation is prohibited by the unit or the disc.
screen, prohibiting an operation
(This is not a malfunction.)
CD sound dropout
• Scratched disc. Replace the disc with an unscratched one.
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction
Disc cannot be inserted
• Check if any disc is already in.
Disc cannot be taken out
• Unplug and plug again the power cord to the outlet, and then press
[EJECT A] on the remote control.
• Press and hold [A EJECT] on the unit for more than 5 secounds.
No picture
NOTE
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owner’s Manual for details on correct operations.
• Playback from a desired track and random playback are not available during program playback.
– 35 –
EN
MAINTENANCE
CABINET CLEANING
• Wipe the front panel and other exterior surfaces of
•
the unit with a soft cloth immersed in lukewarm
water and wrung dry.
Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may
cause damage and discoloration to the exposed surfaces.
SERVICING
• Should your unit become inoperative, do not try to
DISC HANDLING
• Handle the discs so that fingerprints and dust do
not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it
is not used.
correct the problem by yourself. There are no userserviceable parts inside. Turn off, unplug the power
cord and please call our help line mentioned on
the front page, to locate an Authorized Service
Center.
IF THE LASER OPTICAL PICKUP UNIT
IS DIRTY
•
If the unit still does not perform properly when it is
operated, while referring to the relevant sections
and to “TROUBLESHOOTING GUIDE” in this
Owner’s Manual, the laser optical pickup unit may
be dirty. Consult your dealer or an Authorized
Service Center for inspection and cleaning of the
laser optical pickup unit.
• To clean-off, use a soft cloth.
• Do not use a hard cloth since this will mar the disc.
• Wipe the disc in a straight line from center to edge.
• Never wipe with a circular motion.
• Do not use detergent or abrasive cleaning agents.
– 36 –
EN
SPECIFICATIONS
GENERAL SPECIFICATIONS
Sound output:
TV
LCD :
15 inch
Television system :
NTSC-M
Closed caption system :§15.119/FCC
Channel coverage:
VHF:
2 ~ 13
UHF:
14 ~ 69
CATV:
2 ~13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
Tuning System:
181 channel
frequency synthesized
tuning system
Channel access:
Direct access keyboard,
programmable
scan and up/down
DVD
Product type:
Discs:
ELECTRICAL SPECIFICATIONS
DVD Player
DVD video, Audio CD
CD with MP3 files
2 speakers, 1W, 8 ohm
OTHER SPECIFICATIONS
Terminals
Antenna input:
VHF/UHF/CATV
75 ohm unbalanced (F-type)
S-Video input:
Mini DIN 4-pin jack
Video input:
RCA connector [ 1
Audio L/R input:
RCA connector [ 4
Component video input:
One pin jack (Y), 1Vpp (75 ohm)
Two pin jacks (Pr)/(Pb), 700mVpp (75 ohm)
Coaxial digital audio output:
One pin jack, 500mmVpp (75 ohm)
Headphone:
1/8" stereo (3,5mm)
Remote control:
Digital encoded
infrared light system
Operating
temperature:
5°C to 40°C
(41°F~104°F)
Power requirements: AC 120V, 60Hz
Power consumption
(Maximum):
47W
LCD:
15"
Dimensions:
H:15-13/16" (402mm)
W:15-3/16" (385mm)
D:8-7/16" (215mm)
Weight:
9.7 lbs. (4.4kg)
• Designs and specifications are subject to change without notice.
• If there is a discrepancy between languages, the default language will be English.
– 37 –
EN
INDICE
■ INDICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 38
PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 39
■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 40
CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 40
CONEXIÓN EXTERNA . . . . . . . . . . . . . . . . . . . . . . . . . 41
SECCIÓN DE DVD
■ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 44
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . . . . . . 44
MENÚ DE DISCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
REANUDACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
SECCIÓN DE TV
■ OPERACIÓN DE TV Y AJUSTES . . . . . . . . . . . . . . . . . 42
PARA MIRAR UN PROGRAMA DE TV . . . . . . . . . . . . 42
AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
IDIOMA DE MENÚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
CONTROLES DE OPERACIÓN Y FUNCIONES
NOTE
• Para elegir el modo de DVD presione primero [SELECT], [PLAY O] o [EJECT A], o introduzca un
disco en la ranura. De otra manera, el DVD no funcionará.
- MANDO A DISTANCIA
• Para saber cómo funciona el mando a distancia, consulte la [Fig.1] de la página 8.
1. Botón POWER
11. Botón CLEAR
Presione para encender y apagar la unidad.
Presione para cancelar o borrar un ajuste introducido actualmente.
2. Botón PICTURE
Presione para borrar la pantalla “DISCO ADENPresione para ajustar la imagen.
TRO”.
3. Botones numéricos
12.
Botón MODE
Presione para seleccionar directamente el número
Presione para visualizar la pantalla de la reprode canal deseado .
ducción programada o la de reproducción aleatoBotón +100 (para modo TV)
ria en el modo de parada.
Presione para seleccionar canales cuyo número
Presione para visualizar la pantalla de ajuste del
sea superior a 99.
nivel del negro o la pantalla de sonido envolvente
Botón +10 (para modo DVD)
durante la reproducción.
Presione para introducir los números superiores a
9 deseados.
13. Botón SEARCH MODE
Presione para localizar un punto deseado.
4. Botón SLEEP
Presione para ajustar el temporizador de reposo
14. Botón AUDIO
Para modo TV: Presione para seleccionar el
5. Botones SKIP H / G
modo de sonido de TV (ESTEREO/SAP/MONO).
Presione una vez para omitir capítulos o pistas y
Para modo DVD: Presione para seleccionar un
desplazarse a un punto específico.
idioma de audio deseado (si está disponible).
6. Botón PLAY O
15. Botón EJECT A
Presione para reproducir el disco.
Presione para extraer un disco de la unidad.
7. Botón PAUSE F
16.
Botón SELECT
Presione para hacer una pausa en la reproducción
Presione para seleccionar el modo TV, modo de
del disco actual.
entrada externa o modo de DVD.
8. Botón DISPLAY
17. Botones CH. K / L
Para modo TV :
Presione para seleccionar canales memorizados.
Presione para visualizar el número actual de canal en
la pantalla del televisor.
18. Botones VOL. X / Y
Para modo DVD :
Presione para controlar el nivel de volumen del
Presione para visualizar el estado actual en la panDVD y el televisor.
talla del televisor.
19. Botón MUTE
9. Botón SETUP
Presione para silenciar el sonido. Presiónelo de
Presione para entrar o salir del menú de configunuevo para restablecer el sonido.
ración del TV/DVD.
20. Botón ZOOM
10. Botón TITLE
Presione para ampliar la parte de la imagen reproPresione para visualizar el menú de títulos.
ducida en un DVD.
- 38 ES
21. Botón REV h
Presione para ver la imagen en DVD en retroceso
o en cámara lenta de retroceso.
Botón FWD g
Presione para mover en avance rápido o en
cámara lenta en el disco.
22. Botón STOP C
Presione para detener la reproducción del disco.
23. Botón DISC MENU
– Muestra el menú del DVD.
– Muestra la lista de archivos del disco MP3.
24. Botón ENTER
Presione para establecer un ajuste.
25. Botones K (Arriba) /L (Abajo) /{ (Izquierda) /
B (Derecha)
Presione para seleccionar o ajustar los ítems del
menú.
26. Botón RETURN
Presione para volver a la pantalla anterior en el
menú de configuración.
27. Botón A-B
Presione para repetir la reproducción de una sección seleccionada.
28. Botón ANGLE
Presione para cambiar el ángulo de la cámara y
ver la secuencia que se está reproduciendo desde
un ángulo diferente (si existe).
29. Botón REPEAT
Repite la reproducción del disco, título, capítulo,
grupo o pista actual.
30. Botón SUBTITLE
Presione para seleccionar el idioma de los subtítulos.
- PANEL FRONTAL
• Para ver la ilustración del panel frontal, vaya a la página 9, [Fig. 2].
36. Botón SELECT
Presione para seleccionar el modo TV, modo de
entrada externa o modo de DVD.
37. Botón POWER
Presione para encender y apagar la unidad.
38. Botón A EJECT
Presione para extraer un disco de la unidad.
39. Botón PLAY B
Presione para reproducir el disco.
31. Botón STOP C
Presione para detener la reproducción del disco.
32. Ventana de sensor remoto
33. Botón MENU
Presione para entrar o salir del menú de configuración del TV/DVD.
34. Botones VOLUME X / Y
Presione para controlar el nivel de volumen del
DVD y el televisor.
35. Botones CHANNEL K / L
Presione para seleccionar canales memorizados.
PARA INSERTAR LAS PILAS
1 Abra la cubierta del compartimiento de las
pilas empujando la cubierta del mando a distancia en el sentido de la flecha.
PRECAUCIONES A LA HORA DE
INSERTAR LAS PILAS
• Asegúrese de seguir la polaridad correcta, tal como
2 Inserte 2 pilas “AA” en el compartimiento de
las pilas, en el sentido indicado por las marcas de polaridad (+/-).
3 Vuelva a poner la cubierta.
•
•
•
•
se indica en el compartimiento de las pilas. Si se
colocan las pilas con la polaridad invertida se
pueden ocasionar daños a la unidad.
No mezcle distintos tipos de pilas (ej. alcalina y de
carbón-zinc) o pilas viejas con nuevas.
Si no va a usarse la unidad durante un período
largo de tiempo, quite las pilas para prevenir daños
o lesiones ocasionadas por posibles fugas de las
pilas.
No intente recargar las pilas que no sean para
recargar; pueden sobrecalentarse y estropearse.
NOTA
No se recomienda el uso de mandos a distancia universales. No todas las funciones pueden controlarse
con un mando a distancia universal.
Si decide usar un mando a distancia universal con esta unidad, sea consciente de que el número de código
suministrado puede no adecuarse a la unidad. En este caso, llame al fabricante del mando a distancia universal.
- 39 -
ES
PREPARACIÓN PARA LA UTILIZACIÓN
CONEXIONES DE ANTENA/CABLE
NOTA
• Los cables utilizados aquí están disponibles en los comercios.
• Para su seguridad y para evitar daños a la unidad, desconecte el cable de antena de la toma ANT.
antes de trasladar la unidad.
- CONEXIONES DE ANTENA/CABLE
SI TIENE UNA TOMA DE PARED
Conecte el televisor a la toma de antena de pared con
el cable RF (disponible en los comercios).
[Parte posterior de
este unidad]
DIGITAL
AUDIO OUT
(COAXIAL)
VIDEO2
SI TIENE CABLE DE HILOS
R
AUDIO
L
desde Compañia de Cable o
Antena de Satélite
COMPONENT
Y
Conecte el televisor al cable de antena.
NOTA
Pb
Pr
R
AUDIO
L
VIDEO1
VIDEO
S-VIDEO
Cable RF
• Antes de conectar la antena en la toma ANT. de la unidad,
ANT
HEAD PHONE
compruebe que la patilla no esté torcida. Si lo está, ponga la
patilla recta tal como se muestra en la ilustración y a continuación conecte la patilla a la toma ANT. de la unidad.
Patilla torcida
Cable
Conector
(Debe ponerse
recta)
(patilla recta)
- CONEXIÓN CON CAJA DE CONVERTIDOR /CAJA DE SATÉLITE
[Parte posterior de este unidad]
DIGITAL
AUDIO OUT
(COAXIAL)
Caja de convertidor
o caja de satélite
VIDEO2
R
AUDIO
L
COMPONENT
Y
Pb
Pr
R
AUDIO
L
SALIDA
VIDEO 1
VIDEO
ENTRADA
S-VIDEO
ANT
HEAD PHONE
Cable coaxial
de 75 ohmios
ANT
CUANDO SE USA UNA CAJA DE CONVERTIDOR/CAJA DE SATÉLITE
Si su compañía de televisión por cable le suministra
una caja de convertidor o si usa un sistema de
satélite, podrá utilizar la conexión básica que se
muestra anteriormente.
La selección de los canales deberá hacerse con la
caja de convertidor o caja de satélite. Esto significa
que no es posible cambiar de canal utilizando el
mando a distancia de la unidad.
desde Compañia de Cable o
Antena de Satélite
NOTA
Para el instalador de sistemas CATV:
• Esta nota tiene la finalidad de llamar la atención del instalador de sistemas CATV para que tenga en cuenta el
Artículo 820-40 de la NEC, que proporciona recomendaciones para hacer una conexión a tierra apropiada y, en particular, especifica que la tierra del cable debe conectarse al sistema de puesta a tierra del edificio, tan cerca del punto
de entrada del cable como sea posible.
- 40 -
ES
CONEXIÓN EXTERNA
[Parte posterior
de este unidad]
AUDIO
Puede conectar esta unidad a su equipo de audio/vídeo.
• Asegúrese de apagar todos los componentes del
sistema antes de conectar otro componente.
• Consulte los manuales de instrucciones de los
componentes que va a conectar a la unidad.
NOTA
Cuando utilice las tomas de entrada externa, seleccione
“AUX1” o “AUX2” presionando [INPUT SELECT].
(Consulte la página 42.)
• Para utilizar la tomas VIDEO1, seleccione
“AUX1”.
• Para utilizar la tomas VIDEO1, seleccione
“AUX2”.
DIGITAL
AUDIO OUT
(COAXIAL)
VIDEO2
R
AUDIO
L
VIDEO2
COMPONENT
Y
Pb
Pr
R
AUDIO
VIDEO1
L
VIDEO1
VIDEO
S-VIDEO
ANT
HEAD PHONE
Use esta conexión si su propio equipo A/V (ej.
videograbadora) tiene tomas de salida de audio y
vídeo. Cuando se usa un cable Vídeo-S, se obtiene
una imagen mejor.
- ENTRADA DE VÍDEO1
ej.
Cable de audio (SALIDA)
R
A U D IO
L
V ID E
Cable de vídeo (SALIDA)
O1
VI DE O
S- VI DE
O
O
Videograbadora
Cable VIDEO-S (SALIDA)
NOTA
• Si su propio equipo es monofónico (sólo tiene una toma de audio), conecte el cable de audio a la toma AUDIO L de esta unidad.
• Si conecta la toma VIDEO y la toma S-VIDEO simultáneamente, se da prioridad a la S-VIDEO. .
- ENTRADA DE VÍDEO2
VID EO2
R
ej.
Cable de audio (SALIDA)
AU DIO
L
COM PON ENT
Y
Use esta conexión si el equipo A/V (ej. videocámara
o videojuego) tiene tomas de salida de vídeo COMPONENTE (Y,Pb,Pr). Podrá disfrutar de una mejor
imagen con esta conexión.
Cable de vídeo
componente
(SALIDA)
Pb
Pr
Videojuego
Podrá disfrutar de un sonido de DVD con
más presencia desconectando el equipo de
audio digital, tal como el descodificador
Dolby Digital.
- SALIDA DE AUDIO
A toma de ENTRADA
DIGITAL COAXIAL DE AUDIO
DI GI TA L
T
AU DI O OU
L)
(C OA XIA
Equipo doméstico de audio
Descodificador Dolby Digital
NOTA
• La fuente de audio de un disco en un formato de sonido envolvente Dolby Digital de 5,1 canales no se
puede grabar como sonido digital mediante una pletina MD o DAT.
• Si conecta un descodificador Dolby Digital, ajuste la función “DOLBY DIGITAL” a “BITSTREAM”
•
para salida de audio en el modo de configuración. (Consulte la página 30).
A menos que se haga la conexión a un decodificador “DOLBY DIGITAL” a “PCM” para salida de audio
en el modo de configuración.
La reproducción en una unidad utilizando ajustes incorrectos puede generar ruido y distorsión, y también
puede provocar daños a los altavoces. (Consulte la página 30).
Fabricado bajo licencia de Dolby Laboratories. “Dolby” y el símbolo de la doble D son marcas comerciales de
Dolby Laboratories.
- 41 ES
SECCIÓN DE TV
OPERACIÓN DE TV Y AJUSTES
POWER PICTURE SELECT
1
2
3
4
5
6
7
8
NOTA
Para seleccionar el número de canal mediante los botones numéricos:
• Para seleccionar un número de canal de un
solo dígito, presione primero [0] (ej. Para el
canal 2, presione [0] [2]).
• Para seleccionar canales por cable cuyos números
sean superiores a 99, presione primero[+100/+10].
(ej. Para el canal 125, presione [+100/+10] [2] [5]).
EJECT
CH.
9
VOL.
+100
SLEEP
0
+10
SKIP
ZOOM
4 Presione [VOL. X / Y] para seleccionar el
MUTE
nivel de volumen deseado.
PLAY
REV
FWD
VOL.
STOP
PAUSE
DISC
MENU
SLOW
VOLUMEN 20
C C C C CC C C C C C C C C C C
• Presione [MUTE] para silenciar el sonido al instante.
DISPLAY
ENTER
SETUP
TITLE
Vuelva a presionarlo para restaurar el nivel de
volumen anterior.
NOTA
• Si presiona [CH. K / L] en el modo DVD,
puede cambiar los canales del televisor. Incluso
si apaga la unidad en el modo DVD, cuando
vuelve a encenderlo se pondrá en el modo TV.
RETURN
• Los botones sombreados se utilizan para las siguientes operaciones.
PARA MIRAR UN PROGRAMA DE TV
1 Conecte el cable de alimentación de
PARA VER UN CANAL POR CABLE O
SATÉLITE
la unidad a una toma estándar CA.
NOTA
Si
• se visualiza algún dígito en la esquina de la
pantalla, presione [POWER] sin desconectar
el cable de alimentación.
Si la unidad está conectada a una caja de convertidor
o caja de satélite, presione [CH. K / L] para seleccionar CH3 o CH4 según el ajuste de canal de salida
del aparato, y seleccione en él el canal deseado.
2 Presione [POWER] para encender la unidad.
POWER
3 Presione [CH. K / L] para seleccionar el
número de canal deseado.
PARA VER SEÑALES DE ENTRADA DE
UN DISPOSITIVO EXTERNO
Cuando conecte un equipo externo a las tomas de
entrada delanteras AUDIO/VIDEO, presione
[SELECT] o [CH. K / L] repetidamente hasta que
aparezca en la pantalla “AUX1” o “AUX2”.
NOTA
CH.
• Si hay un disco dentro de la unidad, se visu-
alizará el mensaje “DISCO ADENTRO” en la
pantalla durante 10 segundos.
O
Presione los botones numéricos para introducir el número de canal deseado.
1
4
7
2
5
8
3
6
9
DISCO ADENTRO
+100
0
+10
• Para borrar el mensaje al instante, presione [CLEAR].
- 42 -
ES
AJUSTE DE CANAL
IDIOMA DE MENÚ
PROGRAMACIÓN AUTOMÁTICA DE CANAL
1 Presione [SETUP]
y a continuación presione
[K] o [L] para seleccionar el “LANGUAGE”.
De acuerdo con la configuración de fábrica, esta
unidad ha memorizado todos los canales, incluidos
los que no están disponibles en su localidad. Esta
función solo pone automáticamente en memoria los
canales disponibles.
- TV SET UP -
ENTER
1 Presione [SETUP] y a continuación presione
[K] o [L] para señalar “AJUSTE DE CANAL”.
2 Presione [ENTER] repetidamente para seleccionar “ENGLISH” = inglés, “ESPAÑOL” o
“FRANÇAIS”= francés.
- TV PREP. -
SETUP
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION
[OFF]
BACK LIGHT [BRIGHT]
B AJUSTE DE CANAL
AJUSTE DE V-CHIP
IDIOMA
[ESPAÑOL]
TITULO
[OFF]
LUZ DE FONDO [BRILLO]
ENTER
3 Presione [SETUP] para salir del menú.
2 Presione [ENTER] y a continuación presione
SETUP
[K] o [L] para señalar “PREA. AUTO CA.”.
NOTA
– AJUSTE DE CANAL –
• Esta función selecciona sólo el idioma del
AGREGAR/BORRAR CA (CATV)
ENTER
B PREA. AUTO CA.
menú de pantalla; no la fuente de audio.
• Si por alguna razón el menú está en español o
en francés, presione [SETUP], luego [K] o
[L] para seleccionar “IDIOMA [ESPAÑOL]”
o “LANGAGE [FRANÇAIS]”, y a continuación presione [ENTER] repetidamente para
seleccionar el idioma deseado y luego presione [SETUP].
3 Presione [ENTER].
ENTER
• El sintonizador explora y memoriza todos los
canales activos de su localidad.
• El sintonizador se detiene en el canal memorizado
inferior.
NOTA
Cuando
está activado “PREA. AUTO CA.”
•
donde no hay entrada de señal de TV, aparecerá “NO HAY SEÑAL DE TV” en la pantalla después de completarse la exploración
de los canales
• La unidad puede reconocer canales CATV como
canales de TV si las condiciones de recepción
son malas. En este caso, compruebe la conexión
de la antena y vuelva a intentar “PREA. AUTO
CA.” cuando las condiciones de recepción
mejoren.
• La programación de canales memorizados
NO es necesaria cuando la unidad está conectada a una caja de convertidor o caja de
satélite. Sólo tiene que seleccionar el canal
para caja de convertidor o entrada de satélite
(ej. CH3) de la unidad y a continuación seleccione el canal que desee en la caja de convertidor o la caja de satélite.
- 43 -
ES
SECCIÓN DE DVD
REPRODUCCIÓN DE UN DISCO
POWER PICTURE SELECT
5 Precione [EJECT A] para extraer la disco de
EJECT
la unidad.
EJECT
3
SKIP
ZOOM
MUTE
NOTA
Cuando
el modo DVD se ha cambiado al modo
•
TV, el modo DVD se desactiva primero y a
continuación aparece la imagen y suena el
sonido en el TV al cabo de unos 4 segundos.
De la misma manera, cuando se presiona
[POWER] para apagar la unidad en el modo
DVD, este modo se desactiva primero y a continuación se apaga la unidad.
• Puede aparecer “ ” en la parte superior
derecha de la pantalla del TV durante su funcionamiento, que avisa de que el DVD o el
disco han encontrado una operación prohibida.
• Con los DVD que utilizan títulos para señales
de reproducción programada, la reproducción
puede empezar desde el segundo título y
puede omitir estos títulos.
• Durante la reproducción de un disco de dos
capas, las imágenes pueden detenerse durante
un rato. Esto ocurre cuando la 1ª capa cambia
a la 2ª. No se trata de una anomalía.
PLAY
REV
FWD
STOP
PAUSE
DISC
MENU
SLOW
DISPLAY
ENTER
SETUP
TITLE
RETURN
• Los botones sombreados se utilizan para las siguientes operaciones.
REPRODUCCIÓN BÁSICA
PARA EMPEZAR
Si es necesario, encienda el amplificador y cualquier
otro componente.
1 Presione [POWER] para encender la unidad.
POWER
REPRODUCCIÓN DE MP3
1 En el modo de parada, presione [DISC MENU] y precione
K] o [L
L] para seleccionar el grupo o pista que desee.
[K
2 Abra la bandeja del disco manualmente.
LISTA DE ARCHIVOS
DISC
MENU
NOMBRE DE DISCO
Nombre de carpeta 1
Nombre de carpeta 2
Nombre de carpeta 3
Nombre de carpeta 4
Nombre de archivo 1
Nombre de archivo 2
Nombre de archivo 3
Nombre de carpeta 1
3 Introduzca el disco elegido con la etiqueta hacia la parte trasera de la
• Si ha selecciona un grupo, presione [B] o
[ENTER] para ir a la pantalla de selección de
pistas. Presione [s] para volver a la pantalla
anterior (excepto la página superior).
• Si ha seleccionado una pista, presione [ENTER]
para empezar a reproducir pistas. Si empieza por
la que acaba de elegir se reproducirán las pistas
siguientes.
• Si no puede visualizarse enseguida en pantalla la
lista entera de archivos, aparece la “n”para ir a la
página siguiente. appears to go to the next page.
• Presione [TITLE] para volver al archivo superior
de la jerarquía más alta del programa y de la
lista de archivos.
unidad para reproducirlo. Al presionar suavemente el disco para introducirlo en la ranura, su reproducción empezará automáticamente.
• La reproducción empezará desde el primer capí-
tulo/pista del disco.
Si
• la reproducción no empieza automáticamente,
presione [PLAY O].
4 Presione [STOP C] para detener la reproducción.
2 Presione [STOP C] para detener la reproducción.
STOP
STOP
- 44 -
ES
NOTA
• Las carpetas se conocen como grupos; los
archivos, como pistas.
• Los archivos MP3 van acompañados de
REANUDACIÓN
3
iconos.
Se
• puede reconocer un máximo de 255 carpetas.
• Se puede reconocer un máximo de 999 archivos.
• Pueden crearse hasta 8 jerarquías.
Se recomienda para esta unidad el uso de
archivos grabados según las especificaciones
siguientes:
• Frecuencia de muestreo: 44,1 kHz o 48kHz
• Velocidad de transmisión de bits constante:
32kbps ~ 320kbps
• Para archivos MP3 grabados en velocidad de
transmisión de bits variable (VBR), la unidad
puede no mostrar el tiempo real transcurrido.
1 Durante la reproducción, presione [STOP C].
REANUDACIÓN ACTIVADA
STOP
Presione 'PLAY' para reproducir
desde aquí.
Para reproducir desde el inicio,
primero presione 'STOP' y luego 'PLAY'.
(Ejemplo: DVD o CD audio)
Aparecerá
el
mensaje
de reanudación en la pan•
talla del TV.
2 Presione [PLAY O], la reproducción continuará desde el punto donde se paró la reproducción.
MENÚ DE DISCO
PLAY
• Para cancelar el modo de reanudación, presione
dos veces [STOP C].
• Para MP3, la reproducción se reanudará desde el
1 Presione [DISC MENU].
principio de la pista actual.
• La información de reanudación permanece activa-
DISC
MENU
da incluso cuando apaga el interruptor principal.
• Aparecerá el menú principal de DVD
el símbo• Si esta función no está disponible,
lo puede aparecer en la pantalla del televisor.
• Si el menú de disco está disponible en el disco,
aparecerán las opciones de idioma de audio, de
subtítulos, capítulos del título y otras para su
selección.
2 Presione [K], [L], [s] o [B] para seleccionar
un ítem y presione [ENTER] para confirmar la
selección.
ENTER
- 45 -
ES
MEMO
- 46 -
ES
MEMO
- 47 -
ES
LIMITED WARRANTY
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Two (2) years for Picture Tube. Certain parts and LCD image burn-in
are not covered under this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH
THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to
any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED
SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO A FUNAI
AUTHORIZED SERVICE FACILITY.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
To locate your nearest Authorized Service Center or for general service inquiries, please call or
write to the following:
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-968-3429
http://www.SylvaniaConsumerElectronics.com
Head Office: 100 North Street, Teterboro, NJ 07608
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
Printed in China
1EMN20335
L3150UA ★★★★★