Technical data | Fedders CH60ACZ1VF Heat Pump User Manual

Office
OfficeLaminator
Laminator
Neptune
Neptune 125
125
TM
TM
E
Please read these instructions before use.
F
Lire ces instructions avant utilisation.
S
Lea estas instrucciones antes del usarlo.
403843_2_NA_Neptune_EFS_v6.2.indd 1
12/08/2009 16:21:12
INDEX
LAMINATOR CONTROLS / QUICK START GUIDE
3
ENGLISH
4-7
FRANCAIS
8-11
ESPAÑOL
12-15
403843_2_NA_Neptune_EFS_v6.2.indd 2
12/08/2009 16:21:12
LAMINATOR CONTROLS
A
H
I
G
F
E
B
D
C
3 mil
4 mil
5 mil
7 mil
QUICK START GUIDE
1
2
3
4
5
6
7
8
3 mil
9
4 mil
5 mil
3 mil
7 mil
10
4 mil
5 mil
3 mil
7 mil
4 mil
5 mil
7 mil
11
3 mil
4 mil
5 mil
7 mil
3
403843_2_NA_Neptune_EFS_v6.2.indd 3
4
12/08/2009 16:21:19
ENGLISH
E
CAPABILITIES
Performance
Entry width
12.5” / 317mm
Min pouch thickness
3 Mil. (per side)
Max pouch thickness
7 Mil. (per side)
Estimated heat-up time
4 minutes
Cool down time
30-60 minutes
Lamination speed
approx. 20”/min (fixed speed)
Number of rollers
4
Ready indication
Light & beep
Reverse function
Yes
Clear Path / Anti-jam engine
Yes
LED interface
Yes
Power Save / Auto shut-off
Yes (60 mins)
Photo-capable
Yes
Carrier-free
Carry handles
Yes
Yes
Technical Data
Voltage / Frequency / Current(Amps)
110-120V AC; 60Hz; 5A
Wattage
550 Watts
Dimensions (HxWxD)
4.9” x 22” x 9”
Net weight
14.3lbs / 6.5 kg
Laminating capacity (max document thickness) 0.03”
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: Please read before use and keep for future reference.
When laminating;
- plug the machine into an easily accessible socket.
- to prevent electrical shock - do not use the appliance close to water, do not spill water on the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final
laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended
period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow minors to use this machine.
DO NOT laminate sharp or metal objects (eg: staples, paper
clips).
DO NOT laminate heat-sensitive documents (eg: tickets,
ultrasounds etc).
DO NOT laminate with self-adhesive pouches (which require a
cold setting).
DO NOT laminate an empty pouch.
4
403843_2_NA_Neptune_EFS_v6.2.indd 4
12/08/2009 16:21:20
LAMINATOR CONTROLS
A
On/off switch
F
Pouch / document entry slot
B
Standby button & LED
G
Entry support shelf
C
Pouch selection buttons
(3, 4, 5, 7 Mil.)
H
Pouch / document exit
D
Reverse button & LED
I
Cooling system vents
E
Carry handles
FEATURES & TIPS
‘System-Check’ function
When switched on, the machine performs a
‘System-Check’ function. The control panel lights
quickly flash in sequence to check their operation.
3 Mil
‘Safe Start’ function
When switched on, the machine has a default ‘Safe
Start’ function which starts to warm-up at the 3 Mil.
setting. You may select other temperature settings
as required.
‘Reverse’ function
To eject the laminating pouch during use, press and
hold down the reverse button until the pouch has
ejected from the machine.
•
•
•
•
•
•
Always put the item to be laminated into the appropriate sized pouch.
This machine does not need a carrier to laminate.
Always test laminate with a similar size and thickness before final process.
If required, trim excess material from around the
item after lamination and cooling.
For best results, use Fellowes® brand laminating
pouches: Enhance 3 Mil, Capture 5 Mil, Protect 7
Mil.
When working with different pouch thickness’ (temperature settings) it is recommended to start first
with the thinnest pouches.
‘Power Save’ function
If the machine is not active for 60 minutes, the
‘Power Save’ function will place the machine into
standby mode. To operate the machine, press the
‘standby’ button.
SETTING UP THE LAMINATOR
1.
2.
Ensure the machine is on a stable surface. Check that
there is enough clear space behind the machine to
allow items to pass through freely.
3.
Plug the machine in to an easily accessible main socket.
Connect the supplied power cord to the machine.
5
403843_2_NA_Neptune_EFS_v6.2.indd 5
12/08/2009 16:21:21
HOW TO LAMINATE
9.
4.
Switch the power on.
5.
Turn the machine ‘On’ using the ‘standby’ button.
6.
7.
8.
The default setting is 3 Mil. thickness, if laminating different thickness pouches choose between 4, 5 or 7 Mil.
pouch thickness as required. The selected button will
flash red during warm-up or cool-down periods.
When the selected temperature is reached, the flashing
light will change from flashing red to solid green color
and a signal will sound.
10.
11.
Ensure the pouch enters the machine sealed edge first.
Keep the pouch straight and centered within the slot,
not on an angle. Use the entry markings as a guide.
Upon exit, the laminated pouch is hot and soft. To
prevent jamming remove the pouch immediately. Place
pouch on to a flat surface to cool.
To eject a pouch, press and hold down the reverse
button until the pouch is ejected from the front of the
machine. The Standby button will flash and the alert
will sound.
Place the document into the open pouch. Ensure the
document is centered against the sealed edge. Use the
appropriate pouch size for the document.
NEED HELP?
Let our experts help you with a solution. You’ll find the numbers
for your nearest service center on the back cover of this manual.
Customer Service:
www.fellowes.com
WORLDWIDE WARRANTY
Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 2 years from the date of purchase
by the original consumer. If any part is found to be defective during warranty period, your sole and exclusive remedy will be repair
or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling
or unauthorized repair. Any implied warranty, including that of merchantability or fitness for particular purpose, is hereby limited in
duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for any consequential or incidental
damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary from this
warranty. The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or
conditions may be required by local law. For more details or to obtain services under this warranty, please contact Fellowes or your
dealer.
PRODUCT REGISTRATION
Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and benefit from product
news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside of the
machine.
6
403843_2_NA_Neptune_EFS_v6.2.indd 6
12/08/2009 16:21:21
TROUBLESHOOTING
Problem
Possible cause
No ‘red’ power on LED
Machine is not switched on
Ready light does not come on after a
long period
Machine is in a hot or humid area
Item may be too thick to laminate
Pouch does not completely seal the item
Temperature setting may be incorrect
Pouch has waves or bubbles
Temperature setting may be incorrect
Pouch is lost in the machine
Pouch is jammed
Pouch was used ‘open end’ first
Jamming
Pouch was not centered on entry
Pouch was not straight upon entry
Solution
Switch on machine at rear next to plug
inlet and at the wall socket
Move the machine to a cooler and
dry area
Pass through the machine again
Check pouch thickness is correctly
selected and pass through again
Check pouch thickness is correctly
selected and pass through again
Select reverse button and pull out the
item by hand
Empty pouch was used
Pass cleaning sheet (Fellowes
Pouch is damaged after lamination
Damaged rollers or adhesive on rollers
#5320603) through the machine to
test and clean rollers
STORAGE & CLEANING
Switch off the machine at the wall. Allow the machine to cool.
The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine.
Cleaning sheets can be used with the machine. When the machine is warm – run the sheets through the machine to clean any residue
off the rollers.
For optimum performance, it is recommended that cleaning sheets (Fellowes #5320603 are used with the machine regularly.
7
403843_2_NA_Neptune_EFS_v6.2.indd 7
12/08/2009 16:21:21
OO
FCC CLASS B NOTICE
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CANADA CLASS B NOTICE - AVIS CANADA, CLASSE B
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
MODIFICATIONS
Any modifications made to this device that are not approved by Fellowes may void the authority granted to the user by the FCC and/or
by Industry Canada to operate this equipment.
Toutes modifications apportées à ce dispositif et non approuvées par Fellowes annuleront le droit accordé à l’utilisateur par le FCC et/
ou par Industrie Canada de faire fonctionner cet équipement.
Fellowes
Australia
+61-3-8336-9700
Benelux
+31-(0)-76-523-2090
Canada
Japan
+81-(0)-3-5496-2401
Korea
+82-(0)-2-3462-2844
Malaysia
+60-(0)-35122-1231
+1-905-475-6320
Polska
+48-(22)-771-47-40
Deutschland
+49-(0)-5131-49770
Russia
+7-(495)-228-14-03
España / Portugal
+ 34 902 33 55 69
Singapore
France
+33-(0)-1-78-64-91-00
Italia
+39-71-730041
+65-6221-3811
United Kingdom
United States
+44-(0)-1302-836836
+1-630-893-1600
1789
1789
Norwood
Norwood
Avenue,
Avenue,
Itasca,
Itasca,
Illinois
Illinois
60143-1095
60143-1095
• USA
• USA
• 630-893-1600
• 630-893-1600
fellowes.com
fellowes.com
Australia
Australia
Benelux
Benelux
Canada
Canada
China
China
Deutschland
Deutschland
España
España
France
France
Italia
Italia
Japan
Japan
Korea
Korea
Polska
Polska
Singapore
Singapore
United
United
Kingdom
Kingdom
United
United
States
States
2009
2009
Fellowes,
Fellowes,
Inc.Inc.
PartPart
No.No.
403843-2
403843-2
403843_2_NA_Neptune_EFS_v6.2.indd 1
12/08/2009 16:21:09
NN
Download PDF

advertising