FieldServer FS-8700-88 Computer Drive User Manual

A Sierra Monitor Company
Driver Manual
(Supplement to the FieldServer Instruction Manual)
FS-8700-88 Envirotronics SystemsPlus
APPLICABILITY & EFFECTIVITY
Effective for all systems manufactured after May 1, 2001
Driver Version:
1.02
Document Revision: 6
FS-8700-88 Envirotronics SystemsPlus
Table of Contents
TABLE OF CONTENTS
1.
2.
ENVIROTRONICS SYSTEMSPLUS DESCRIPTION ........................................................5
DRIVER SCOPE OF SUPPLY ..........................................................................................6
2.1.
Supplied by FieldServer Technologies for this driver ..................................................6
3.
4.
HARDWARE CONNECTIONS..........................................................................................7
CONFIGURING THE FIELDSERVER AS A ENVIROTRONICS SYSTEMSPLUS CLIENT
8
4.1.
Data Arrays/Descriptors..............................................................................................8
4.2.
Client Side Connection Descriptions ...........................................................................9
4.3.
Client Side Node Descriptors ......................................................................................9
4.4.
Client Side Map Descriptors......................................................................................10
4.4.1. FieldServer Related Map Descriptor Parameters...................................................10
4.4.2. Driver Related Map Descriptor Parameters ...........................................................10
4.4.3. Timing Parameters ................................................................................................10
4.4.4. Map Descriptor Example 1 - read event event_num ..............................................11
4.4.5. Map Descriptor Example 2 - set event event_num = Boolean................................11
4.4.6. Map Descriptor Example 3 - read aux. aux_num ...................................................11
4.4.7. Map Descriptor Example 4 - set aux. aux_num = Boolean.....................................11
4.4.8. Map Descriptor Example 5 - read setpoint channel................................................12
4.4.9. Map Descriptor Example 6 - set setpoint channel = value......................................12
4.4.10. Map Descriptor Example 7 - read pv channel .....................................................12
4.4.11. Map Descriptor Example 8 - read deviation channel...........................................12
4.4.12. Map Descriptor Example 9 - read initial setpoint channel ...................................13
4.4.13. Map Descriptor Example 10 - set initial setpoint channel = value .......................13
4.4.14. Map Descriptor Example 11 - read program status.............................................13
4.4.15. Map Descriptor Example 12 - read remaining step cycles ..................................14
4.4.16. Map Descriptor Example 13 - read selected program.........................................14
4.4.17. Map Descriptor Example 14 - read step number.................................................14
4.4.18. Map Descriptor Example 15 - read step time......................................................14
4.4.19. Map Descriptor Example 16 - read remaining step time .....................................15
4.4.20. Map Descriptor Example 17 -read start step.......................................................15
4.4.21. Map Descriptor Example 18 - set start step = step_num ....................................15
4.4.22. Map Descriptor Example 19 - read start time enabled ........................................15
4.4.23. Map Descriptor Example 20 - set start time enabled = Boolean .........................16
4.4.24. Map Descriptor Example 21 - read stop time enabled ........................................16
4.4.25. Map Descriptor Example 22 - set stop time enabled = Boolean..........................16
4.4.26. Map Descriptor Example 23 - read start time......................................................17
4.4.27. Map Descriptor Example 24 - read stop time......................................................17
4.4.28. Map Descriptor Example 25 - read audible alarm ...............................................17
4.4.29. Map Descriptor Example 26 - set audible alarm = Boolean ................................18
4.4.30. Map descriptor Example 27 - read software version ...........................................18
4.4.31. Map Descriptor Example 28 - read events..........................................................18
4.4.32. Map Descriptor Example 29 - read auxs.............................................................19
4.4.33. Map Descriptor Example 30 - read alarm status alarm .......................................19
4.4.34. Map Descriptor Example 31 - emergency stop ...................................................19
4.4.35. Map Descriptor Example 32 - hold program .......................................................20
4.4.36. Map Descriptor Example 33 - resume program ..................................................20
4.4.37. Map Descriptor Example 34 - start program .......................................................20
4.4.38. Map Descriptor Example 35 - start system .........................................................20
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.39.
4.4.40.
4.4.41.
4.4.42.
4.4.43.
4.4.44.
4.4.45.
4.4.46.
4.4.47.
4.4.48.
4.4.49.
4.4.50.
4.4.51.
4.4.52.
4.4.53.
4.4.54.
4.4.55.
4.4.56.
4.4.57.
4.4.58.
4.4.59.
4.4.60.
4.4.61.
4.4.62.
4.4.63.
4.4.64.
4.4.65.
4.4.66.
4.4.67.
4.4.68.
4.4.69.
4.4.70.
4.4.71.
4.4.72.
4.4.73.
4.4.74.
4.4.75.
4.4.76.
4.4.77.
4.4.78.
4.4.79.
4.4.80.
4.4.81.
4.4.82.
4.4.83.
4.4.84.
4.4.85.
4.4.86.
4.4.87.
4.4.88.
4.4.89.
Table of Contents
Map Descriptor Example 36 - stop program .......................................................21
Map Descriptor Example 37 - stop system .........................................................21
Map Descriptor Example 38 - alarm reset...........................................................21
Map Descriptor Example 39 - alarm acknowledge..............................................21
Map Descriptor Example 40 - edit alarms...........................................................22
Map Descriptor Example 41 - set circulators = Boolean .....................................22
Map Descriptor Example 42 - set lights = Boolean .............................................22
Map Descriptor Example 43 - select program program_num..............................22
Map Descriptor Example 44 - use keypad = Boolean .........................................23
Map Descriptor Example 45 - edit program program_num .................................23
Map Descriptor Example 46 - edit step step_num ..............................................23
Map Descriptor Example 47 - edit analog channel..............................................23
Map Descriptor Example 48 - edit fuzzy channel................................................24
Map Descriptor Example 49 - edit remove step ..................................................24
Map Descriptor Example 50 - edit insert step .....................................................24
Map Descriptor Example 51 - edit add step........................................................24
Map Descriptor Example 52 - edit clear program................................................25
Map Descriptor Example 53 - use emulator mode ..............................................25
Map Descriptor Example 54 - end edit mode......................................................25
Map Descriptor Example 55 - edit set cycles = num_cycles ...............................25
Map Descriptor Example 56 - edit set next = next_step_num .............................26
Map Descriptor Example 57 - edit set analog min. = value .................................26
Map Descriptor Example 58 - edit set analog max. = value ................................26
Map Descriptor Example 59 - edit set analog type = number..............................26
Map Descriptor Example 60 - edit set engineering min. = value .........................27
Map Descriptor Example 61 - edit set engineering max. = value ........................27
Map Descriptor Example 62 - edit set analog address = number........................27
Map Descriptor Example 63 - edit set units = number ........................................27
Map Descriptor Example 64 - edit set fuzzy heat cycles time = value.................28
Map Descriptor Example 65 - edit set fuzzy cool cycles time = value .................28
Map Descriptor Example 66 - edit set fuzzy heat sensitivity = value ...................28
Map Descriptor Example 67- edit set fuzzy cool sensitivity = value ....................28
Map Descriptor Example 68 - edit set fuzzy heat max. power = value ................29
Map Descriptor Example 69 - edit set fuzzy cool max. power = value.................29
Map Descriptor Example 70 - edit set fuzzy heat min. time = value ....................29
Map Descriptor Example 71 - edit set fuzzy cool min. time = value ....................29
Map Descriptor Example 72 - edit set fuzzy heat stage delay = value ................30
Map Descriptor Example 73 - edit set fuzzy cool stage delay = value.................30
Map Descriptor Example 74 - edit set fuzzy dead band = value .........................30
Map Descriptor Example 75 - edit set duration = hour:minute:second ................31
Map Descriptor Example 76 - set start time = month/day hour:minute................31
Map Descriptor Example 77 - set stop time = month/day hour:minute ................32
Map Descriptor Example 78 - set date = month / day / year ...............................32
Map Descriptor Example 79 - set time = hour:minute:second.............................33
Map Descriptor Example 80 - edit set setpoint channel = value..........................33
Map Descriptor Example 80 - edit set gsoak channel = value.............................34
Map Descriptor Example 81 - edit set gsoak enabled channel = Boolean...........34
Map Descriptor Example 82 - edit set events = event_list...................................35
Map Descriptor Example 83 - edit set auxs = aux_list ........................................35
Map Descriptor Example 84 - edit read program ................................................36
Map Descriptor Example 85 - edit read step.......................................................36
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.90.
4.4.91.
4.4.92.
4.4.93.
4.4.94.
4.4.95.
4.4.96.
4.4.97.
4.4.98.
4.4.99.
4.4.100.
4.4.101.
4.4.102.
4.4.103.
4.4.104.
4.4.105.
4.4.106.
4.4.107.
4.4.108.
4.4.109.
4.4.110.
4.4.111.
4.4.112.
4.4.113.
4.4.114.
4.4.115.
4.4.116.
4.4.117.
4.4.118.
4.4.119.
Table of Contents
Map Descriptor Example 86 - edit read number steps ........................................36
Map Descriptor Example 87 - edit read duration.................................................37
Map Descriptor Example 88 - edit read events ...................................................37
Map Descriptor Example 89 - edit read aux........................................................38
Map Descriptor Example 90 - edit read cycles....................................................38
Map Descriptor Example 91 - edit read next.......................................................39
Map Descriptor Example 92 - edit read analog min. ...........................................39
Map Descriptor Example 93 - edit read analog max. ..........................................39
Map Descriptor Example 94 - edit read analog type ...........................................40
Map Descriptor Example 95 - edit read engineering min. ...................................40
Map Descriptor Example 96 - edit read engineering max. ...............................40
Map Descriptor Example 97 - edit read analog address ..................................41
Map Descriptor Example 98 - edit read units...................................................41
Map Descriptor Example 99 - edit read fuzzy heat cycle time..........................41
Map Descriptor Example 100 - edit read fuzzy cool cycle time ........................42
Map Descriptor Example 101 - edit read fuzzy heat sensitivity ........................42
Map Descriptor Example 102 - edit read fuzzy cool sensitivity ........................42
Map Descriptor Example 103 - edit read fuzzy heat max. power .....................43
Map Descriptor Example 104 - edit read fuzzy cool max. power .....................43
Map Descriptor Example 105 - edit read fuzzy heat min. time .........................43
Map Descriptor Example 106 - edit read fuzzy cool min. time .........................44
Map Descriptor Example 107 - edit read fuzzy heat stage delay .....................44
Map Descriptor Example 108 - edit read fuzzy cool stage delay......................44
Map Descriptor Example 109 - edit read fuzzy dead band ..............................45
Map Descriptor Example 110 - read alarm log ................................................45
Map Descriptor Example 111 - edit read setpoint channel...............................45
Map Descriptor Example 112 - edit read gsoak enabled channel ....................46
Map Descriptor Example 113 - edit read gsoak channel..................................46
Map Descriptor Example 114 - edit read scan alarm .......................................46
Map Descriptor Example 115 - edit set scan alarm = Boolean.........................47
APPENDIX A. PARAMETER TABLES .................................................................................48
Appendix A.1. System plus data types................................................................................48
Appendix A.2. Legal System PlusCommands .....................................................................48
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
1.
Page 5 of 49
Envirotronics SystemsPlus Description
The Envirotronics SystemsPlus driver allows the FieldServer to transfer data to and from
devices over RS-232 using Envirotronics SystemsPlus protocol. The FieldServer can only
emulate a Client.
Max Nodes Supported
FieldServer Mode
Client
Nodes
1
Comments
Only 1 Client node per port allowed
The Envirotronics SystemsPlus driver allows for direct interfacing to a SystemsPlus
Programmer/Controller device. The driver acts as a Client to the device and can be used to
read and set system parameters for status monitoring and control purposes. Combined with
other protocol drivers on a FieldServer such as BACNet, complete SystemsPlus monitoring and
control is made possible via control systems such as Scada.
The driver is not available as a Server since a FieldServer cannot fully emulate a SystemsPlus
device’s interfaces. Any existing Server drivers are for FieldServer testing purposes only.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
2.
Page 6 of 49
Driver Scope of Supply
2.1.
Supplied by FieldServer Technologies for this driver
FieldServer Technologies
PART #
FS-8915-10
FS-8917-02
FS-8917-01
FS-8700-88
Description
UTP cable (7 foot) for RS-232 use
RJ45 to DB9F connector adapter
RJ45 to DB25M connection adapter
Driver Manual.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
3.
Page 7 of 49
Hardware Connections
The FieldServer is connected to the SystemsPlus Controller as shown below.
Configure the SystemsPlus Controller according to manufacturer’s instructions.
# &
!
$
!
%!
& " !!
!
' )
' "!
!
"
"
(
&
#
$
# &
!
"
#
!
" !!
!
! ,-
-. /. 0.12
3.
2
2
*
#+ (
Note:
• The SystemsPlus Controller MUST be set to COMMAND MODE using the manufacturer’s
software before connecting the FieldServer.
•
The SystemsPlus Controller’s “Command End of Line” setting MUST be set to “CR”. Using
the manufacturer’s software to do this setting before connecting the FieldServer
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.
Page 8 of 49
Configuring the FieldServer as a Envirotronics SystemsPlus Client
For a detailed discussion on FieldServer configuration, please refer to the FieldServer
instruction manual. The information that follows describes how to expand upon the factory
defaults provided in the configuration files included with the FieldServer (See “.csv” sample files
provided with the FieldServer).
This section documents and describes the parameters necessary for configuring the FieldServer
to communicate with an Envirotronics SystemsPlus Server.
4.1.
Data Arrays/Descriptors
The configuration file tells the FieldServer about its interfaces, and the routing of data
required. In order to enable the FieldServer for Envirotronics SystemsPlus communications,
the driver independent FieldServer buffers need to be declared in the “Data Arrays” section,
the destination device addresses need to be declared in the “Client Side Nodes” section,
and the data required from the Servers needs to be mapped in the “Client Side Map
Descriptors” section. Details on how to do this can be found below.
Note that in the tables, * indicates an optional parameter, with the bold legal value being the
default.
Section Title
Data_Arrays
Column Title
Function
Legal Values
Up to 15 alphanumeric
characters
Float, Bit, UInt16, SInt16,
Packed_Bit, Byte,
Packed_Byte,
Swapped_Byte
Data_Array_Name
Provide name for Data Array
Data_Array_Format
Provide data format. Each Data Array
can only take on one format.
Data_Array_Length
Number of Data Objects. Must be
larger than the data storage area
1-10,000
required by the Map Descriptors for the
data being placed in this array.
Example
// Data Arrays
Data_Arrays
Data_Array_Name,
Event_States,
Data_Format,
bit,
Data_Array_Length
10
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.2.
Page 9 of 49
Client Side Connection Descriptions
Section Title
Connections
Column Title
Protocol
Function
Specify which port the device is connected
to the FieldServer
Specify protocol used
Baud*
Specify baud rate
Parity*
Data_Bits*
Stop_Bits*
Handshaking*
Poll _Delay*
Specify parity
Specify data bits
Specify stop bits
Specify hardware handshaking
Time between internal polls
Port
Legal Values
1
P1-P8
SystemsPlus
300 – 19200, standard baud
rates only
Even, Odd, None
7, 8
1, 2
RTS, RTS/CTS, None
0-32000 seconds, 1 second
Example
//
Client Side Connections
Connections
Port,
Protocol,
P1,
SystemsPlus,
4.3.
Baud,
19200,
Parity,
None,
Handshaking,
None,
Poll_Delay
0.100s
Client Side Node Descriptors
Section Title
Nodes
Column Title
Function
Node_Name
Provide name for node
Protocol
Specify protocol used
Specify which port the device is
connected to the FieldServer
Port
Legal Values
Up to 32 alphanumeric
characters
SystemsPlus
P1-P81
Example
//
Client Side Nodes
Nodes
Node_Name,
SYSPLUS_01,
Protocol,
SystemsPlus,
Port
P1
1
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.
Page 10 of 49
Client Side Map Descriptors
4.4.1.
FieldServer Related Map Descriptor Parameters
Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Offset
Function
4.4.2.
Function
Name of this Map
Descriptor
Name of Data Array where
data is to be stored in the
FieldServer
Starting location in Data
Array
Function of Client Map
Descriptor
Legal Values
Up to 32 alphanumeric
characters
One of the Data Array names
from “Data Array” section
above
0 to maximum specified in
“Data Array” section above
RDBC, WRBC, WRBX, AWT,
ART2
Driver Related Map Descriptor Parameters
Column Title
Function
Legal Values
One of the node names
specified in “Client Node
Descriptor” above
Node_Name
Name of Node to fetch data
from
SysPlus_Data_Type
Specifies a SystemsPlus data
type this mapdesc will use
Refer to Appendix A.1
SysPlus_Alarm_Name
A SystemsPlus alarm name
Any four character alarm
name
Specifies a SystemsPlus
command this mapdesc will
SysPlus_Cmd
use
Name of the data array where
Store_Data_Array_Name
data must be stored
Offset where data must be
Store_Data_Array_Offset
stored
Name of the data array that
Par_Data_Array_Name
will contain parameters
needed by this mapdesc
Offset where parameters will
Par_Data_Array_Offset
be located
Address
Starting address
Length
Length of Map Descriptor
4.4.3.
Refer to Appendix A.2
Any data array name
0 to maximum offset into
store data array
Any data array name
0 to maximum offset into
parameter data array
0 to value allowed for the
specific mapdesc
1 to value allowed for the
specific mapdesc
Timing Parameters
Column Title
Scan_Interval
Function
Rate at which data is polled
Legal Values
40.001s
2
The new ART function stands for “Active Read on Trigger” and is used to effect a single data
read per trigger. Please refer to the Map Descriptor examples for using this function.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.4.
//
Page 11 of 49
Map Descriptor Example 1 - read event event_num
Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name,
Event_States_00,
Scan_Interval,
0s,
Data_Array_Name,
Event_States,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Event,
Address,
0,
Length
1
The event_num is specified by the “Address” field. The state of the event will be stored as 1 for “ON” or 0 for “OFF”.
4.4.5.
//
Map Descriptor Example 2 - set event event_num = Boolean
Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name,
Event_States_00,
Data_Array_Name,
Event_States_0,
Data_Array_Offset,
0,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Event,
Address,
0,
Length
1
The event_num is specified by the “Address” field. The Boolean state of the event is retrieved from the value written into
Data_Array_Name at Data_Array_Offset. Use a value of 1 for “ON” and a value of 0 for “OFF”.
4.4.6.
//
Map Descriptor Example 3 - read aux. aux_num
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Aux_States_00,
Scan_Interval,
0s,
Data_Array_Name,
Aux_States,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Aux,
Address,
0,
Length
1
The aux_num is specified by the “Address” field. The state of the aux will be stored as 1 for “ON” or 0 for “OFF”.
4.4.7.
//
Map Descriptor Example 4 - set aux. aux_num = Boolean
Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name,
Aux_States_00,
Data_Array_Name,
Aux_States_0,
Data_Array_Offset,
0,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Aux,
Address,
0,
Length
1
The aux_num is specified by the “Address” field. The Boolean state of the aux is retrieved from the value written into
Data_Array_Name at Data_Array_Offset. Use a value of 1 for “ON” and a value of 0 for “OFF”.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.8.
//
Page 12 of 49
Map Descriptor Example 5 - read setpoint channel
Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name,
Setpoints_00,
Scan_Interval,
0s,
Data_Array_Name,
Setpoints,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Setpoint,
Address,
0,
Length
1
The channel is specified by the “Address” field.
4.4.9.
//
Map Descriptor Example 6 - set setpoint channel = value
Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name,
Setpoints_00,
Data_Array_Name,
Setpoints_0,
Data_Array_Offset,
0,
The channel is specified by the “Address” field.
Data_Array_Offset.
4.4.10.
//
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Setpoint,
Address,
0,
Length
1
value is retrieved from the value written into Data_Array_Name at
Map Descriptor Example 7 - read pv channel
Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name,
Pvs_00,
Scan_Interval,
0s,
Data_Array_Name,
Pvs,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Pv,
Address,
0,
Length
1
SysPlus_Data_Type,
Deviation,
Address,
0,
Length
1
The channel is specified by the “Address” field.
4.4.11.
//
Map Descriptor Example 8 - read deviation channel
Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name,
Deviation_00,
Scan_Interval,
0s,
Data_Array_Name,
Deviations,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
The channel is specified by the “Address” field.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.12.
//
Page 13 of 49
Map Descriptor Example 9 - read initial setpoint channel
Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name,
Init_Setpoint_00,
Scan_Interval,
0s,
Data_Array_Name,
Init_Setpoint,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Init_Setpoint,
Address,
0,
Length
1
The channel is specified by the “Address” field.
4.4.13.
//
Map Descriptor Example 10 - set initial setpoint channel = value
Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name,
Init_Setpoint_00,
Data_Array_Name,
Init_Setpoint_0,
Data_Array_Offset,
0,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Init_Setpoint,
Address,
0,
Length
1
The channel is specified by the “Address” field; value is retrieved from the value written into Data_Array_Name at Data_Array_Offset.
4.4.14.
//
Map Descriptor Example 11 - read program status
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Prg_Sts,
Scan_Interval,
0s,
Data_Array_Name,
Prog_Status,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Prog_Status,
The program status will be stored to Data_Array_Name at Data_Array_Offset with one of the following possible values:
Program Status
Undefined
Timed Start
Alarm Hold
Hold
Run
Timed Stop
Stop
VALUE
0
1
2
3
4
5
6
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.15.
//
Map Descriptor Example 12 - read remaining step cycles
Client Side Map Descriptors
// Map Descriptors
Map_Descriptor_Name,
Rm_Stp_Cy,
4.4.16.
//
Data_Array_Name,
Rem_Stepcycles,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Rem_Step_Cyc,
Length
1
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Selected_Prog,
Length
1
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Step_Number,
Length
1
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Step_Time,
Length
3
Client Side Map Descriptors
4.4.17.
Scan_Interval,
0s,
Data_Array_Name,
Selected_Prog,
Data_Array_Offset,
0,
Map Descriptor Example 14 - read step number
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Step_Number,
4.4.18.
//
Scan_Interval,
0s,
Map Descriptor Example 13 - read selected program
Map Descriptors
Map_Descriptor_Name,
Sel_Prog,
//
Page 14 of 49
Scan_Interval,
0s,
Data_Array_Name,
Step_Number,
Data_Array_Offset,
0,
Map Descriptor Example 15 - read step time
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Step_Time,
Scan_Interval,
0s,
Data_Array_Name,
Step_Time,
Data_Array_Offset,
0,
The retrieved step time will be stored as follows in Data_Array_Name:
Offset from Data_Array_Offset
0
1
2
Description
Hour
Minute
Second
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.19.
//
Page 15 of 49
Map Descriptor Example 16 - read remaining step time
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Rm_Stp_Tm,
Scan_Interval,
0s,
Data_Array_Name,
Rem_Steptime,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Rem_Step_Tim,
Length
3
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Start_Step,
Length
1
The retrieved remaining step time will be stored as follows in Data_Array_Name:
Offset from Data_Array_Offset
0
1
2
4.4.20.
//
Map Descriptor Example 17 -read start step
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Start_Step,
4.4.21.
//
Description
Hour
Minute
Second
Scan_Interval,
0s,
Data_Array_Name,
Start_Step,
Data_Array_Offset,
0,
Function,
rdbc,
Map Descriptor Example 18 - set start step = step_num
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Start_Step,
Data_Array_Name,
Start_Step_0,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Start_Step,
Length
1
The step_num must be written into Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.22.
//
Map Descriptor Example 19 - read start time enabled
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Start_Time_Ena,
Scan_Interval,
0s,
Data_Array_Name,
Start_Time_Ena,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Start_Time_Ena,
The start time enabled status will be stored as 1 for “Enabled” or 0 for “Disabled” in Data_Array_Name at Data_Array_Offset.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.23.
//
Page 16 of 49
Map Descriptor Example 20 - set start time enabled = Boolean
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Start_Time_Ena,
Data_Array_Name,
Start_Time_Ena_0,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Start_Time_Ena,
Length
1
A Boolean value of 1 for “Enabled” or 0 for “Disabled” must be written to Data_Array_Name at Data_Array_Offset to trigger this
command.
4.4.24.
//
Map Descriptor Example 21 - read stop time enabled
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Stop_Time_Ena,
Scan_Interval,
0s,
Data_Array_Name,
Stop_Time_Ena,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Stop_Time_Ena,
Length
1
The stop time enabled status will be stored as 1 for “Enabled” or 0 for “Disabled” in Data_Array_Name at Data_Array_Offset.
4.4.25.
//
Map Descriptor Example 22 - set stop time enabled = Boolean
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Stop_Time_Ena,
Data_Array_Name,
Stop_Time_Ena_0,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Stop_Time_Ena,
Length
1
A Boolean value of 1 for “Enabled” or 0 for “Disabled” must be written to Data_Array_Name at Data_Array_Offset to trigger this
command.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.26.
//
Page 17 of 49
Map Descriptor Example 23 - read start time
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Start_Time,
Scan_Interval,
0s,
Data_Array_Name,
Start_Time,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Start_Time,
Length
4
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Stop_Time,
Length
4
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Audible_Alarm,
Length
1
The retrieved start time will be stored as follows in Data_Array_Name:
Offset from Data_Array_Offset
0
1
2
3
4.4.27.
//
Description
Month
Day
Hour
Minute
Map Descriptor Example 24 - read stop time
Client Side Map Descriptor
Map Descriptor
Map_Descriptor_Name,
Stop_Time,
Scan_Interval,
0s,
Data_Array_Name,
Stop_Time,
Data_Array_Offset,
0,
The retrieved stop time will be stored as follows in Data_Array_Name:
Offset from Data_Array_Offset
0
1
2
3
4.4.28.
//
Description
Month
Day
Hour
Minute
Map Descriptor Example 25 - read audible alarm
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Audible_Alarm,
Scan_Interval,
0s,
Data_Array_Name,
Audible_Alarm,
Data_Array_Offset,
0,
Function,
rdbc,
The status of the audible alarm will be stored as 1 for “on” or 0 for “off” in Data_Array_Name at Data_Array_Offset.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.29.
//
Page 18 of 49
Map Descriptor Example 26 - set audible alarm = Boolean
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Audible_Alarm,
Data_Array_Name,
Audible_Alarm_0,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Audible_Alarm,
Length
1
A Boolean value of 1 for “on” or 0 for “off” must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.30.
//
Map descriptor Example 27 - read software version
Cleint Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Sw_Version,
4.4.31.
//
Scan_Interval,
0s,
Data_Array_Name,
Sw_Version,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Sw_Version,
Length
1
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
All_Events,
Length
10
Map Descriptor Example 28 - read events
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
All_Event_States,
Scan_Interval,
0s,
Data_Array_Name,
All_Event_States,
Data_Array_Offset,
0,
The retrieved event states will be stored as follows in Data_Array_Name:
( A value of 1 will be stored for “on” or 0 for “off” )
Offset from Data_Array_Offset
0
1
2
..
9
Description
Event_0 state
Event_1 state
Event_2 state
..
Event_9 state
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.32.
//
Page 19 of 49
Map Descriptor Example 29 - read auxs
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
All_Aux_States,
Scan_Interval,
0s,
Data_Array_Name,
All_Aux_States,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
All_Auxs,
Length
10
The retrieved aux states will be stored as follows in Data_Array_Name: (A value of 1 will be stored for “on” or 0 for “off”)
Offset from Data_Array_Offset
0
1
2
..
9
4.4.33.
//
Description
Aux_0 state
Aux_1 state
Aux_2 state
..
Aux_9 state
Map Descriptor Example 30 - read alarm status alarm
Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name,
Alarm_Sts_00,
Scan_Interval,
0s,
Data_Array_Name,
Alarm_Statuses,
Data_Array_Offset,
0,
Function,
rdbc,
Node_Name,
SYSPLUS_01,
SysPlus_Data_Type,
Alarm,
SysPlus_Alarm_Name,
volt,
Length
1
alarm is specified by the name under SysPlus_Alarm_Name. The status of the alarm will be stored as 1 for “OK” or 0 for “FAIL” in
Data_Array_Name at Data_Array_Offset.
4.4.34.
//
Map Descriptor Example 31 - emergency stop
Client Side Map Descriptors
Map Descriptors
Map_Descriptor_Name,
Emergency_Stop,
Data_Array_Name,
ProgSysControl,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Emergency_Stop,
Triggger this command by writing any value to Data_Array_Name at Data_Array_Offset.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.35.
//
Page 20 of 49
Map Descriptor Example 32 - hold program
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Hold_Program,
Data_Array_Name,
ProgSysControl,
Data_Array_Offset,
1,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Hold_Program,
Length
1
SysPlus_Cmd,
Resume_Program,
Length
1
Triggger this command by writing any value to Data_Array_Name at Data_Array_Offset.
4.4.36.
//
Map Descriptor Example 33 - resume program
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Resume_Program,
Data_Array_Name,
ProgSysControl,
Data_Array_Offset,
2,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
Triggger this command by writing any value to Data_Array_Name at Data_Array_Offset.
4.4.37.
//
Map Descriptor Example 34 - start program
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Start_Program,
Data_Array_Name,
ProgSysControl,
Data_Array_Offset,
3,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Start_Program,
Length
1
SysPlus_Cmd,
Start_System,
Length
1
Triggger this command by writing any value to Data_Array_Name at Data_Array_Offset.
4.4.38.
//
Map Descriptor Example 35 - start system
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Start_System,
Data_Array_Name,
ProgSysControl,
Data_Array_Offset,
4,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
Triggger this command by writing any value to Data_Array_Name at Data_Array_Offset.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.39.
//
Page 21 of 49
Map Descriptor Example 36 - stop program
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Stop_Program,
Data_Array_Name,
ProgSysControl,
Data_Array_Offset,
5,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Stop_Program,
Length
1
SysPlus_Cmd,
Stop_System,
Length
1
SysPlus_Cmd,
Alarm_Reset,
Length
1
SysPlus_Cmd,
Alarm_Ack,
Length
1
Triggger this command by writing any value to Data_Array_Name at Data_Array_Offset.
4.4.40.
//
Map Descriptor Example 37 - stop system
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Stop_System,
Data_Array_Name,
ProgSysControl,
Data_Array_Offset,
6,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
Triggger this command by writing any value to Data_Array_Name at Data_Array_Offset.
4.4.41.
//
Map Descriptor Example 38 - alarm reset
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Alarm_Reset,
Data_Array_Name,
AlarmControl,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
Triggger this command by writing any value to Data_Array_Name at Data_Array_Offset.
4.4.42.
//
Map Descriptor Example 39 - alarm acknowledge
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Alarm_Ack,
Data_Array_Name,
AlarmControl,
Data_Array_Offset,
1,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
Triggger this command by writing any value to Data_Array_Name at Data_Array_Offset.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.43.
//
Page 22 of 49
Map Descriptor Example 40 - edit alarms
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Edit_Alarms,
Data_Array_Name,
Edit_Alarms,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Alarms,
Length
1
SysPlus_Cmd,
Set_Circs,
Length
1
Triggger this command by writing any value to Data_Array_Name at Data_Array_Offset.
4.4.44.
//
Map Descriptor Example 41 - set circulators = Boolean
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Set_Circs,
Data_Array_Name,
ManualControl,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
Write a value of 1 for “on” or 0 for “off” to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.45.
//
Map Descriptor Example 42 - set lights = Boolean
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Set_Lights,
Data_Array_Name,
ManualControl,
Data_Array_Offset,
1,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Set_Lights,
Length
1
Write a value of 1 for “on” or 0 for “off” to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.46.
//
Map Descriptor Example 43 - select program program_num
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Select_Program,
Data_Array_Name,
Program_Num,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Select_Prog,
A program_num value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.47.
//
Page 23 of 49
Map Descriptor Example 44 - use keypad = Boolean
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Use_Keypad,
Data_Array_Name,
Use_Keypad,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Use_Keypad,
Length
1
A Boolean value of 1 for “true” or 0 for “false” must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.48.
//
Map Descriptor Example 45 - edit program program_num
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Program,
Data_Array_Name,
Ed_Program,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Program,
Length
1
A program_num value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.49.
//
Map Descriptor Example 46 - edit step step_num
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Step,
Data_Array_Name,
Ed_Step,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Step,
Length
1
SysPlus_Cmd,
Ed_Analog,
Length
1
A step_num value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.50.
//
Map Descriptor Example 47 - edit analog channel
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Analog,
Data_Array_Name,
Ed_Analog,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
A channel value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.51.
//
Page 24 of 49
Map Descriptor Example 48 - edit fuzzy channel
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Fuzzy,
Data_Array_Name,
Ed_Fuzzy,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Fuzzy,
Length
1
A channel value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.52.
//
Map Descriptor Example 49 - edit remove step
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Remove_Step,
Data_Array_Name,
Ed_Remove_Step,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Remove_Step,
Length
1
SysPlus_Cmd,
Ed_Insert_Step,
Length
1
SysPlus_Cmd,
Ed_Add_Step,
Length
1
Any value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.53.
Map Descriptor Example 50 - edit insert step
Map_Descriptor_Name,
Ed_Insert_Step,
Data_Array_Name,
Ed_Insert_Step,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
Any value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.54.
//
Map Descriptor Example 51 - edit add step
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Add_Step,
Data_Array_Name,
Ed_Add_Step,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
Any value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.55.
//
Page 25 of 49
Map Descriptor Example 52 - edit clear program
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Clr_Program,
Data_Array_Name,
Ed_Clr_Program,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Clr_Program,
Length
1
SysPlus_Cmd,
Use_Emu_Mode,
Length
1
Any value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.56.
//
Map Descriptor Example 53 - use emulator mode
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Use_Emu_Mode,
Data_Array_Name,
Misc_Cmds,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
A value of 1 to use emulator mode or a value of 0 to return to command mode must be written to Data_Array_Name at
Data_Array_Offset to trigger this command. Note that all driver RDBC function Map Descriptors are stopped when entering emulator
mode. Map Descriptors will resume polling when returning to command mode.
4.4.57.
//
Map Descriptor Example 54 - end edit mode
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
End_Edit_Mode,
Data_Array_Name,
Misc_Cmds,
Data_Array_Offset,
1,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
End_Edit_Mode,
Length
1
SysPlus_Cmd,
Ed_Set_Cycles,
Length
1
Any value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.58.
//
Map Descriptor Example 55 - edit set cycles = num_cycles
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Cycles,
Data_Array_Name,
Ed_Cycles,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
A value of num_cycles must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.59.
//
Page 26 of 49
Map Descriptor Example 56 - edit set next = next_step_num
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Next,
Data_Array_Name,
Ed_Next,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Next,
Length
1
A value of next_step_num must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.60.
//
Map Descriptor Example 57 - edit set analog min. = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Ana_Min,
Data_Array_Name,
Ed_Set_Ana_Min,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Ana_Min,
Length
1
SysPlus_Cmd,
Ed_Set_Ana_Max,
Length
1
SysPlus_Cmd,
Ed_Set_Ana_Type,
Length
1
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.61.
//
Map Descriptor Example 58 - edit set analog max. = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Ana_Max,
Data_Array_Name,
Ed_Set_Ana_Max,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.62.
//
Map Descriptor Example 59 - edit set analog type = number
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Ana_Type,
Data_Array_Name,
Ed_Set_Ana_Type,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
A value of number must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.63.
//
Page 27 of 49
Map Descriptor Example 60 - edit set engineering min. = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Eng_Min,
Data_Array_Name,
Ed_Set_Eng_Min,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Eng_Min,
Length
1
SysPlus_Cmd,
Ed_Set_Eng_Max,
Length
1
SysPlus_Cmd,
Ed_Set_Ana_Addr,
Length
1
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.64.
//
Map Descriptor Example 61 - edit set engineering max. = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Eng_Max,
Data_Array_Name,
Ed_Set_Eng_Max,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.65.
//
Map Descriptor Example 62 - edit set analog address = number
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Ana_Addr,
Data_Array_Name,
Ed_Set_Ana_Addr,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
A value of number must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.66.
//
Map Descriptor Example 63 - edit set units = number
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Units,
Data_Array_Name,
Ed_Set_Units,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Units,
A value of number must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.67.
//
Page 28 of 49
Map Descriptor Example 64 - edit set fuzzy heat cycles time = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Fuz_Hct,
Data_Array_Name,
Ed_Set_Fuz_Hct,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Fuz_Hct,
Length
1
SysPlus_Cmd,
Ed_Set_Fuz_Cct,
Length
1
SysPlus_Cmd,
Ed_Set_Fuz_HSens,
Length
1
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.68.
//
Map Descriptor Example 65 - edit set fuzzy cool cycles time = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Fuz_Cct,
Data_Array_Name,
Ed_Set_Fuz_Cct,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.69.
//
Map Descriptor Example 66 - edit set fuzzy heat sensitivity = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Fuz_HSens,
Data_Array_Name,
Ed_Set_Fuz_HSens,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.70.
//
Map Descriptor Example 67- edit set fuzzy cool sensitivity = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Fuz_CSens,
Data_Array_Name,
Ed_Set_Fuz_CSens,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Fuz_CSens,
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.71.
//
Page 29 of 49
Map Descriptor Example 68 - edit set fuzzy heat max. power = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Fuz_HMPwr,
Data_Array_Name,
Ed_Set_Fuz_HMPwr,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Fuz_HMPwr,
Length
1
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.72.
//
Map Descriptor Example 69 - edit set fuzzy cool max. power = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Fuz_CMPwr,
Data_Array_Name,
Ed_Set_Fuz_CMPwr,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Fuz_CMPwr,
Length
1
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.73.
//
Map Descriptor Example 70 - edit set fuzzy heat min. time = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Fuz_HMTim,
Data_Array_Name,
Ed_Set_Fuz_HMTim,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Fuz_HMTim,
Length
1
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.74.
//
Map Descriptor Example 71 - edit set fuzzy cool min. time = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Fuz_CMTim,
Data_Array_Name,
Ed_Set_Fuz_CMTim,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Fuz_CMTim,
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.75.
//
Page 30 of 49
Map Descriptor Example 72 - edit set fuzzy heat stage delay = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Fuz_HSDly,
Data_Array_Name,
Ed_Set_Fuz_HSDly,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Fuz_HSDly,
Length
1
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.76.
//
Map Descriptor Example 73 - edit set fuzzy cool stage delay = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Fuz_CSDly,
Data_Array_Name,
Ed_Set_Fuz_CSDly,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Fuz_CSDly,
Length
1
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.77.
//
Map Descriptor Example 74 - edit set fuzzy dead band = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Fuz_Deadb,
Data_Array_Name,
Ed_Set_Fuz_Deadb,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Fuz_Deadb,
A value of value must be written to Data_Array_Name at Data_Array_Offset to trigger this command.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.78.
//
Page 31 of 49
Map Descriptor Example 75 - edit set duration = hour:minute:second
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Duration,
Data_Array_Name,
Par_Bit_Triggers,
Data_Array_Offset,
0,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Duration,
Par_Data_Array_Name,
Ed_Set_Duration,
Par_Data_Array_Offset,
0,
Length
1
This command is used by first writing the parameter data (hour:minute:second) and then triggering the command by writing any value
to Data_Array_Name at Data_Array_Offset.
Parameter data setup:
Offset from par_data_array_offset
0
1
2
4.4.79.
//
Description
Hour
Minute
Second
Map Descriptor Example 76 - set start time = month/day hour:minute
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Set_Start_Time,
Data_Array_Name,
Par_Bit_Triggers,
Data_Array_Offset,
1,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Set_Start_Time,
Par_Data_Array_Name,
Set_Start_Time,
Par_Data_Array_Offset,
0,
Length
1
This command is used by first writing the parameter data and then triggering the command by writing any value to Data_Array_Name
at Data_Array_Offset.
Parameter data setup:
Offset from par_data_array_offset
0
1
2
3
Description
Month
Day
Hour
Minute
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.80.
//
Page 32 of 49
Map Descriptor Example 77 - set stop time = month/day hour:minute
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Set_Stop_Time,
Data_Array_Name,
Par_Bit_Triggers,
Data_Array_Offset,
2,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Set_Stop_Time,
Par_Data_Array_Name,
Set_Stop_Time,
Par_Data_Array_Offset,
0,
Length
1
This command is used by first writing the parameter data and then triggering the command by writing any value to Data_Array_Name
at Data_Array_Offset.
Parameter data setup:
Offset from par_data_array_offset
0
1
2
3
4.4.81.
//
Description
Month
Day
Hour
Minute
Map Descriptor Example 78 - set date = month / day / year
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Set_Date,
Data_Array_Name,
Par_Bit_Triggers,
Data_Array_Offset,
3,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Set_Date,
Par_Data_Array_Name,
Set_Date,
Par_Data_Array_Offset,
0,
Length
1
This command is used by first writing the parameter data and then triggering the command by writing any value to Data_Array_Name
at Data_Array_Offset.
Parameter data setup:
Offset from par_data_array_offset
0
1
2
Description
Month
Day
Year
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.82.
//
Page 33 of 49
Map Descriptor Example 79 - set time = hour:minute:second
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Set_Time,
Data_Array_Name,
Par_Bit_Triggers,
Data_Array_Offset,
4,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Set_Time,
Par_Data_Array_Name,
Set_Time,
Par_Data_Array_Offset,
0,
Length
1
This command is used by first writing the parameter data and then triggering the command by writing any value to Data_Array_Name
at Data_Array_Offset.
Parameter data setup:
Offset from par_data_array_offset
0
1
2
4.4.83.
//
Description
Hour
Minute
Second
Map Descriptor Example 80 - edit set setpoint channel = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Setpoint,
Data_Array_Name,
Par_Val_Trigger,
Data_Array_Offset,
0,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Setpoint,
Par_Data_Array_Name,
Ed_Set_Setpoint,
Par_Data_Array_Offset,
0,
This command is used by first writing the parameter data value and then triggering the command by writing channel to
Data_Array_Name at Data_Array_Offset.
Parameter data setup:
Offset from par_data_array_offset
0
Description
Value
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.84.
//
Page 34 of 49
Map Descriptor Example 80 - edit set gsoak channel = value
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Gsoak,
Data_Array_Name,
Par_Val_Trigger,
Data_Array_Offset,
1,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Gsoak,
Par_Data_Array_Name,
Ed_Set_Gsoak,
Par_Data_Array_Offset,
0,
Length
1
This command is used by first writing the parameter data value and then triggering the command by writing channel to
Data_Array_Name at Data_Array_Offset.
Parameter data setup:
Offset from par_data_array_offset
0
4.4.85.
//
Description
Value
Map Descriptor Example 81 - edit set gsoak enabled channel = Boolean
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Gs_Ena,
Data_Array_Name,
Par_Val_Trigger,
Data_Array_Offset,
2,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Gsoak_Ena,
Par_Data_Array_Name,
Ed_Set_Gs_Ena,
Par_Data_Array_Offset,
0,
This command is used by first writing the parameter data Boolean and then triggering the command by writing channel to
Data_Array_Name at Data_Array_Offset.
Parameter data setup:
Offset from par_data_array_offset
0
Description
Boolean
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.86.
//
Page 35 of 49
Map Descriptor Example 82 - edit set events = event_list
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Events,
Data_Array_Name,
Par_Val_Trigger,
Data_Array_Offset,
3,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Events,
Par_Data_Array_Name,
Ed_Set_Events,
Par_Data_Array_Offset,
0,
Length
10
This command is used by first writing the parameter data event_list and then triggering the command by writing the number of events
to Data_Array_Name at Data_Array_Offset.
Note: Only consecutive events can be set ( eg. to set event9, all 10 events must be set and 10 written to Data_Array_Name ).
Parameter data setup: (Use a value of 1 for “on” or a value of 0 for “off” per event)
Offset from par_data_array_offset
0
..
9
4.4.87.
//
Description
Event0
..
Event9
Map Descriptor Example 83 - edit set auxs = aux_list
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Auxs,
Data_Array_Name,
Par_Val_Trigger,
Data_Array_Offset,
4,
Function,
awt,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Auxs,
Par_Data_Array_Name,
Ed_Set_Auxs,
Par_Data_Array_Offset,
0,
Length
10
This command is used by first writing the parameter data aux_list and then triggering the command by writing the number of auxs to
Data_Array_Name at Data_Array_Offset. Note: Only consecutive auxs can be set ( eg. to set aux1, all auxs from 0 to 1 must be set
and 2 written to Data_Array_Name ).
Parameter data setup: (Use a value of 1 for “on” or a value of 0 for “off” per aux)
Offset from par_data_array_offset
0
..
9
Description
Aux0
..
Aux9
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.88.
//
Page 36 of 49
Map Descriptor Example 84 - edit read program
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Program,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
0,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Program,
Store_Data_Array_Name,
Ed_Rd_Program,
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.89.
//
Description
Program number
Map Descriptor Example 85 - edit read step
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Step,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
1,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Step,
Store_Data_Array_Name,
Ed_Rd_Step,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.90.
//
Description
Step number
Map Descriptor Example 86 - edit read number steps
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Num_Steps,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
2,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Num_Steps,
Store_Data_Array_Name,
Ed_Rd_Num_Steps,
Store_Data_Array_Offset,
0,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
Description
Number of steps
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.91.
//
Page 37 of 49
Map Descriptor Example 87 - edit read duration
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Duration,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
3,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Duration,
Store_Data_Array_Name,
Ed_Rd_Duration,
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.92.
//
Description
Duration
Map Descriptor Example 88 - edit read events
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Events,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
4,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Events,
Store_Data_Array_Name,
Ed_Rd_Events,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
..
9
Description
Event0 status
..
Event9 status
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.93.
//
Page 38 of 49
Map Descriptor Example 89 - edit read aux.
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Aux,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
5,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Aux,
Store_Data_Array_Name,
Ed_Rd_Aux,
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
..
9
4.4.94.
//
Description
Aux0 status
..
Aux9 status
Map Descriptor Example 90 - edit read cycles
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Cycles,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
6,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Cycles,
Store_Data_Array_Name,
Ed_Rd_Cycles,
Store_Data_Array_Offset,
0,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
Description
Number of cycles
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.95.
//
Page 39 of 49
Map Descriptor Example 91 - edit read next
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Next,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
7,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Next,
Store_Data_Array_Name,
Ed_Rd_Next,
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.96.
//
Description
Next
Map Descriptor Example 92 - edit read analog min.
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Ana_Min,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
8,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Ana_Min,
Store_Data_Array_Name,
Ed_Rd_Ana_Min,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.97.
//
Description
Min analog value
Map Descriptor Example 93 - edit read analog max.
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Ana_Max,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
9,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Ana_Max,
Store_Data_Array_Name,
Ed_Rd_Ana_Max,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
Description
Max analog value
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.98.
//
Page 40 of 49
Map Descriptor Example 94 - edit read analog type
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Ana_Type,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
10,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Ana_Type,
Store_Data_Array_Name,
Ed_Rd_Ana_Type,
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.99.
//
Description
Analog type
Map Descriptor Example 95 - edit read engineering min.
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Eng_Min,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
11,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Eng_Min,
Store_Data_Array_Name,
Ed_Rd_Eng_Min,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.100.
//
Description
Min engineering value
Map Descriptor Example 96 - edit read engineering max.
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Eng_Max,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
12,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Eng_Max,
Store_Data_Array_Name,
Ed_Rd_Eng_Max,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
Description
Max engineering value
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.101.
//
Page 41 of 49
Map Descriptor Example 97 - edit read analog address
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Ana_Addr,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
13,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Ana_Addr,
Store_Data_Array_Name,
Ed_Rd_Ana_Addr,
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.102.
//
Description
Analog address
Map Descriptor Example 98 - edit read units
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Units,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
14,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Units,
Store_Data_Array_Name,
Ed_Rd_Units,
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.103.
//
Description
Units value
Map Descriptor Example 99 - edit read fuzzy heat cycle time
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Fuz_Hct,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
15,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Fuz_Hct,
Store_Data_Array_Name,
Ed_Rd_Fuz_Hct,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
Description
Heat cycle time
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.104.
//
Page 42 of 49
Map Descriptor Example 100 - edit read fuzzy cool cycle time
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Fuz_Cct,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
16,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Fuz_Cct,
Store_Data_Array_Name,
Ed_Rd_Fuz_Cct,
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.105.
//
Description
Cool cycle time
Map Descriptor Example 101 - edit read fuzzy heat sensitivity
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Fuz_HSens,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
17,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Fuz_HSens,
Store_Data_Array_Name,
Ed_Rd_Fuz_HSens,
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.106.
//
Description
Heat sensitivity
Map Descriptor Example 102 - edit read fuzzy cool sensitivity
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Fuz_CSens,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
18,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Fuz_CSens,
Store_Data_Array_Name,
Ed_Rd_Fuz_CSens,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
Description
Cool sensitivity
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.107.
//
Page 43 of 49
Map Descriptor Example 103 - edit read fuzzy heat max. power
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Fuz_HMPwr,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
19,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Fuz_HMPwr,
Store_Data_Array_Name,
Ed_Rd_Fuz_HMPwr,
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.108.
//
Description
Max heat power
Map Descriptor Example 104 - edit read fuzzy cool max. power
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Fuz_CMPwr,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
20,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Fuz_CMPwr,
Store_Data_Array_Name,
Ed_Rd_Fuz_CMPwr,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.109.
//
Description
Max cool power
Map Descriptor Example 105 - edit read fuzzy heat min. time
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Fuz_HMTim,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
21,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Fuz_HMTim,
Store_Data_Array_Name,
Ed_Rd_Fuz_HMTim,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
Description
Min heat time
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.110.
//
Page 44 of 49
Map Descriptor Example 106 - edit read fuzzy cool min. time
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Fuz_CMTim,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
22,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Fuz_CMTim,
Store_Data_Array_Name,
Ed_Rd_Fuz_CMTim,
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.111.
//
Description
Min cool time
Map Descriptor Example 107 - edit read fuzzy heat stage delay
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Fuz_HSDly,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
23,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Fuz_HSDly,
Store_Data_Array_Name,
Ed_Rd_Fuz_HSDly,
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.112.
//
Description
Heat stage delay
Map Descriptor Example 108 - edit read fuzzy cool stage delay
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Fuz_CSDly,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
24,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Fuz_CSDly,
Store_Data_Array_Name,
Ed_Rd_Fuz_CSDly,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
Description
Cool stage delay
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.113.
//
Page 45 of 49
Map Descriptor Example 109 - edit read fuzzy dead band
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Fuz_Deadb,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
25,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Fuz_Deadb,
Store_Data_Array_Name,
Ed_Rd_Fuz_Deadb,
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.114.
//
Description
Dead band
Map Descriptor Example 110 - read alarm log
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Rd_Alarm_Log,
Data_Array_Name,
Rd_Triggers,
Data_Array_Offset,
26,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Rd_Alarm_Log,
Store_Data_Array_Name,
Rd_Alarm_Log,
Store_Data_Array_Offset,
0,
Length
1
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.115.
//
Description
To be determined !
Map Descriptor Example 111 - edit read setpoint channel
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Setpoint,
Data_Array_Name,
Rd_Par_Triggers,
Data_Array_Offset,
0,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Setpoint,
Store_Data_Array_Name,
Ed_Rd_Setpoint,
This command is triggered by writing channel to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
Description
Setpoint
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
4.4.116.
//
Page 46 of 49
Map Descriptor Example 112 - edit read gsoak enabled channel
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Gsoak_Ena,
Data_Array_Name,
Rd_Par_Triggers,
Data_Array_Offset,
1,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Gsoak_Ena,
Store_Data_Array_Name,
Ed_Rd_Gsoak_Ena,
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing channel to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows: ( A value of 1 is used for “true” or 0 for “false” )
Offset from Store_Data_Array_Offset
0
4.4.117.
//
Description
Gsoak enabled
Map Descriptor Example 113 - edit read gsoak channel
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Gsoak,
Data_Array_Name,
Rd_Par_Triggers,
Data_Array_Offset,
2,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Gsoak,
Store_Data_Array_Name,
Ed_Rd_Gsoak,
Store_Data_Array_Offset,
0,
Length
1
This command is triggered by writing channel to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows:
Offset from Store_Data_Array_Offset
0
4.4.118.
//
Description
Gsoak value
Map Descriptor Example 114 - edit read scan alarm
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Rd_Scan_00,
Data_Array_Name,
Scan_Alm_Trigs,
Data_Array_Offset,
0,
Function,
art,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Rd_Scan,
SysPlus_Alarm_Name,
fire,
Store_Data_Array_Name,
Ed_Rd_Scan,
Store_Data_Array_Offset,
0,
This command is triggered by writing any value to Data_Array_Name at Data_Array_Offset.
The retrieved data is stored as follows: ( A value of 1 is stored for “Fail” or 0 for “Normal” )
Offset from Store_Data_Array_Offset
0
Description
Alarm status
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
4.4.119.
//
Page 47 of 49
Map Descriptor Example 115 - edit set scan alarm = Boolean
Client Side Mao Descriptors
Map Descriptor
Map_Descriptor_Name,
Ed_Set_Scan_00,
Data_Array_Name,
Set_Scan_Trig,
Data_Array_Offset,
0,
Function,
wrbx,
Node_Name,
SYSPLUS_01,
SysPlus_Cmd,
Ed_Set_Scan,
SysPlus_Alarm_Name,
fire,
This command is triggered by writing a Boolean value to Data_Array_Name at Data_Array_Offset.
A value of 1 is used for “true” or 0 for “false”.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Length
1
FS-8700-88 Envirotronics SystemsPlus
Page 48 of 49
Appendix A. Parameter Tables
Appendix A.1. System plus data types
Event
Pv
Prog_Status
Step_Number
Start_Step
Start_Time
Sw_Version
Alarm
Aux
Deviation
Rem_Step_Cyc
Step_Time
Start_Time_Ena
Stop_Time
All_Events
Setpoint
Init_Setpoint
Selected_Prog
Rem_Step_Tim
Stop_Time_Ena
Audible_Alarm
All_Auxs
Appendix A.2. Legal System PlusCommands
Ed_Rd_Program
Ed_Rd_Duration
Ed_Rd_Cycles
Ed_Rd_Ana_Max
Ed_Rd_Eng_Max
Ed_Rd_Step
Ed_Rd_Events
Ed_Rd_Next
Ed_Rd_Ana_Type
Ed_Rd_Ana_Addr
Ed_Rd_Num_Steps
Ed_Rd_Aux
Ed_Rd_Ana_Min
Ed_Rd_Eng_Min
Ed_Rd_Units
Ed_Rd_Fuz_Hct
Ed_Rd_Fuz_CSens
Ed_Rd_Fuz_Cct
Ed_Rd_Fuz_HMPwr
Ed_Rd_Fuz_HSens
Ed_Rd_Fuz_CMPwr
Ed_Rd_Fuz_HMTim
Ed_Rd_Fuz_CSDly
Ed_Rd_Fuz_CMTim
Ed_Rd_Fuz_Deadb
Ed_Rd_Fuz_HSDly
Rd_Alarm_Log
Ed_Rd_Setpoint
Ed_Rd_Scan
Ed_Rd_Gsoak_Ena
Emergency_Stop
Ed_Rd_Gsoak
Hold_Program
Resume_Program
Stop_Program
Start_Program
Stop_System
Start_System
Alarm_Reset
Alarm_Ack
Set_Lights
Ed_Program
Ed_Fuzzy
Ed_Add_Step
Ed_Set_Cycles
Ed_Set_Ana_Max
Ed_Set_Eng_Max
Ed_Set_Fuz_Hct
Ed_Set_Fuz_CSens
Ed_Set_Fuz_HMTim
Ed_Set_Fuz_CSDly
Ed_Set_Duration
Set_Date
Ed_Set_Gsoak
Ed_Set_Auxs
Ed_Alarms
Select_Prog
Ed_Step
Ed_Remove_Step
Ed_Clr_Program
Ed_Set_Next
Ed_Set_Ana_Type
Ed_Set_Ana_Addr
Ed_Set_Fuz_Cct
Ed_Set_Fuz_HMPwr
Ed_Set_Fuz_CMTim
Ed_Set_Fuz_Deadb
Set_Start_Time
Set_Time
Ed_Set_Gsoak_Ena
Set_Circs
Use_Keypad
Ed_Analog
Ed_Insert_Step
Use_Emu_Mode
Ed_Set_Ana_Min
Ed_Set_Eng_Min
Ed_Set_Units
Ed_Set_Fuz_HSens
Ed_Set_Fuz_CMPwr
Ed_Set_Fuz_HSDly
Ed_Set_Scan
Set_Stop_Time
Ed_Set_Setpoint
Ed_Set_Events
End_Edit_Mode
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
FS-8700-88 Envirotronics SystemsPlus
Page 49 of 49
THIS PAGE INTENTIONALLY LEFT BLANK
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com