Owner`s manual | Fitness Quest 1800 Treadmill User Manual

®
Dedication to Quality
We warrant this product to be free from all defects
in material and workmanship when used
according to the manufacturer’s instructions.
See Limited Warranty Card for details.
Save your sales receipt.
(You may wish to staple it into this manual.)
3/30/06
1600/1800
Treadmills
Serial No: _______________________
Date of Purchase: ____________
Write the serial number in the
space above for reference.
OWNER’S MANUAL
F OR M AXIMUM E FFECTIVENESS
AND
Serial Number
Decal
For Service or Parts call:
1-800-497-5831
S AFETY, P LEASE R EAD T HIS
O WNER ’ S M ANUAL B EFORE U SING Y OUR
N EW B ALANCE 1600/1800 T READMILL .
14
1600/1800
EXPLODED VIEW
11
13
10
16
59
57
76
22
84
58
57
65
17
18
64
52
29
61
61
60
27
31
67
60
51
38
25
60
26
82
32
36
60
33
37
75
75
34
47
75
82 65
46
87
43
23
75
72
85 61
61
35
74
64
48
45
58
44
60
42
83
56
64
58
57
65
41
58
41
54
55
86
58
86
86
39
80
1600/1800 PARTS LIST/EXPLODED VIEW
ITEM # PART NAME
10
11
SAFETY KEY
LEFT CONSOLE
13
14
16
17
18
18
22
23
25
26
27
29
31
32
33
34
35
36
37
38
39
41
42
43
44
45
46
47
48
51
52
54
55
RIGHT CONSOLE
BOOK RACK
TOP & BOTTOM PULSE SENSOR W/WIRE
HAND GRIP
FRONT MOTOR COVER (1600)
FRONT MOTOR COVER (1800)
HANDLEBAR WIRE
SHOCK ABSORBER
SPEED SENSOR WIRE
SPEED SENSOR WIRE HOLDER
BELT GUIDE
WIRE COVER
POWER CORD
LEFT FRAME END CAP
RIGHT FRAME END CAP
RIGHT SIDE CAP
LEFT SIDE CAP
LEFT REAR FRAME SIDE CAP
RIGHT REAR FRAME SIDE CAP
MOTOR COVER BRACKET
LOCKING KNOB ASSEMBLY
35mm WHEEL - PLASTIC
BELT ADJUSTMENT KNOB
TOP & BOTTOM LEFT REAR END CAP
TOP & BOTTOM RIGHT REAR END CAP
INDICATOR
LEFT SIGHT INDEX
LEFT CLEAR CAP
RIGHT CLEAR CAP
FOOT RAIL
NON SKID
END CAP
60mm WHEEL - RUBBER
32
PART #
TM-01
T1600-05
T1800-08
TM-03
TM-04
TM-06
TM-07
T1600-02
T1800-02
TM-09
T1618-24
T1618-11
TM-25
T1618-12
TM-24
TM-12
T1618-16
T1618-17
T1618-14
T1618-15
T1618-18
T1618-19
TM-10
TM-15
T1618-23
TM-17
T1618-22
T1618-27
T1618-21
TM-20
TM-18
TM-19
T1618-26
TM-21
TM-14
TM-13
QTY.
1
1
1
1
1
2
2
1
1
1
2
1
1
2
1
1
1
1
1
1
1
1
4
1
2
2
1
1
2
2
1
1
2
2
2
2
ITEM #
56
57
58
59
60
61
64
65
67
70
72
74
75
76
56
80
83
84
85
86
87
PART NAME
50mm WHEEL - RUBBER
M8 x 35mm ALLEN BOLT
M8 NYLON NUT
M4 x 16mm PHILLIPS SCREW
M4 x 12mm PHILLIPS SCREW
M10 NYLON NUT
M8 x 20mm ALLEN BOLT
M8 WASHER
M3 x 10mm PHILLIPS SCREW
M10 WASHER
M10 STAR WASHER
M10 x 63mm ALLEN BOLT
M4 x 6mm PHILLIPS SCREW
M3.5 x 16mm SCREW
50mm WHEEL - RUBBER
M8 x 45mm ALLEN BOLT
M8 x 40mm ALLEN BOLT
M5 x 20mm PHILLIPS SCREW
16 x 10.5 x 5.9 BUSHING
END CAP 22*22
RIGHT SIGHT INDEX
LUBE & WALK KIT
DECALS (1600)
BOX TOP
FASTENER PACK
OWNERS MANUAL
DECALS (1800)
CHEST STRAP (1800)
BOX BOTTOM
PART #
TM-26
TM-27
TM-28
TM-29
TM-30
TM-31
TM-35
TM-36
TM-42
TM-44
TM-43
T1618-34
TM-34
T1618-35
TM-26
TM-45
TM-40
TM-48
TM-38
TM-16
TM-23
NBTLW05
T1600-03
T1618-29
T1618-36
T1618-37
T1800-03
T1800-07
TM-22
QTY.
2
4
9
29
31
9
8
11
2
3
2
2
16
6
2
2
2
2
2
3
1
1
1
1
1
1
1
1
1
TABLE OF CONTENTS
Important Safety Instructions ...........................................................2
Introduction/Customer Service Information ..................................3
Unit Warning/Caution Labels and Specifications & Parts.........4-5
Assembly/Setup Instructions .......................................................6-10
Folding and Moving Your Treadmill for Storage .....................11-12
Taking Care of Your Treadmill ...................................................13-14
Electronics Operating Instructions for Your Treadmill ..................15
Quick Reference Guide ......................................................16-17
Display Functions & Program Functions - 1600 .................18-19
Display Functions & Program Functions - 1800 .................20-21
Using The Pulse Function ...........................................................22
Exercise Guidelines .........................................................................23
Knowing the Basics....................................................................23
A Complete Exercise Program............................................23-24
Aerobic Exercise: How Much? How Often? ...........................24
When to Exercise .......................................................................24
Measuring Your Heart Rate .................................................24-25
Clothing ......................................................................................25
Tips to Keep You Going.............................................................25
Heart Rate Target Zone Chart..................................................26
Warm Up & Cool Down Stretches ...........................................27-28
Troubleshooting Guide ...................................................................29
Workout Progress Charts ...........................................................30-31
Parts List ............................................................................................32
Exploded View .....................................................Inside Back Cover
©2005 and ©2006 Fitness Quest Inc. All rights reserved. Made in China.
Fitness Quest ® is a registered trademark of Fitness Quest Inc.
New Balance® and NB® logo are registered trademarks of New Balance Athletic Shoe Inc.
Fitness Quest Inc. is the exclusive licensee of New Balance Athletic Shoe Inc.
No part of this booklet may be reproduced or utilized in any form or by any means
electronic, mechanical or otherwise without the express written consent of the copyright holder.
3/30/06
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this equipment.
– THIS EQUIPMENT IS FOR CONSUMER USAGE ONLY –
CAUTION:
Exercise of a strenuous nature, as is customarily done on this equipment, should not
be undertaken without first consulting a physician. No specific health claims are
made or implied as they relate to the equipment.
1) Before starting this or any other exercise
program, consult your physician, who can assist
you in determining the target heart rate zone
appropriate for your age and physical condition.
Certain exercise programs or types of equipment
may not be appropriate for all people. This is
especially important for people over the age of
35, pregnant women, or those with pre-existing
health problems or balance impairments.
2) Monitor your heart rate while you exercise and
keep your estimated pulse rate within your target
heart rate zone. Follow the instructions on pages
24 and 25 in this manual regarding heart rate
monitoring and how to determine your appropriate target heart rate zone. When used properly,
the heart rate pulse sensors and display monitor
provide a reasonably accurate estimate of your
actual heart rate. This estimate is not exact and
persons with medical conditions and/or a
specific need for accurate heart rate monitoring
should not rely on the estimations provided.
3) Warm up before any exercise program by
doing 5-10 minutes of aerobic activity, followed
by stretching.
4) Inspect the equipment. Before EACH use, a
complete visual inspection, and test of the features
and functions of the assembled equipment is
required. Do not use equipment if you detect
any incorrect, worn or loose components. NEVER
operate the equipment if the equipment is not
functioning properly.
5) Do not wear loose or dangling clothing while
using the equipment. Wear comfortable clothes
that allow freedom of movement.
6) Wear comfortable shoes made of good support
with rubberized sole.
7) Breathe naturally, never holding your breath
during an exercise.
8) Avoid over training. You should be able to carry
on a conversation while exercising.
9) After an exercise session, cool down with slow
walking and stretching.
2
10) This equipment should not be used by or near
children.
11) Handicapped or disabled people must have
medical approval before using this equipment
and should be under close supervision when
using any exercise equipment.
12) If you are taking medication which may
affect your heart rate, a physician's advice
is absolutely essential.
13) Use this equipment only for its intended use as
described in this manual. Do not use attachments not recommended by the manufacturer.
14) Only one person at a time should use this
equipment.
15) Do not put hands, feet, or any foreign objects
on or near this equipment when in use by
others.
16) Always use this equipment on a level surface.
17) Care should be taken when mounting or
dismounting the equipment. Do not stand on
the Walking Belt while starting the Treadmill.
Straddle the Belt and stand on the plastic
Foot Rails.
18) Start exercise slowly and gradually increase
the amount of resistance.
19) If the user experiences dizziness, nausea, chest
pain, or any other abnormal symptoms, stop
exercise at once and consult a physician
immediately.
20) Use caution not to pinch fingers or hands in
moving parts when using the equipment.
21) Risk of electrical shock. This equipment is to be
used only indoors and in a dry location.
22) Have plenty of clearance behind and in
front of your Treadmill. It is important to keep
children, pets, furniture and other objects out
of the way when using your Treadmill. You
should have a minimum of 4 feet of clearance
both in front of and behind your Treadmill and
a minimum of 2 feet of clearance on both
sides of the Treadmill.
KEEP THESE INSTRUCTIONS
ADDITIONAL WORKOUT PROGRESS CHARTS
Date
Weight
Waist
Abdomen
Hips
Thighs
Calves
Resting
Heart Rate
Date
Weight
Waist
Abdomen
Hips
Thighs
Calves
Resting
Heart Rate
31
WORKOUT PROGRESS CHARTS
Use the charts below to keep track of your progress
over time. Before writing on them, make as many
copies as you think you’ll need. We suggest you keep
these in a notebook. You will find it both informative
and motivational to look back at what you’ve done,
and this data will help you to chart future fitness goals
as you progress. Every two weeks, measure yourself to
rechart your progress.
Measuring Sites
Waist
Abdomen
Hips
Thighs (L/R)
Date
Weight
Waist
Abdomen
Hips
Thighs
Calves
Resting
Heart Rate
Calves (L/R)
Date
30
Weight
Waist
Abdomen
Hips
Thighs
Calves
Resting
Heart Rate
INTRODUCTION
CONGRATULATIONS ON PURCHASING YOUR
NEW BALANCE TREADMILL
With this product in your home, you have everything you need to start
your own workout program to tone and firm the major muscle groups of
your lower body. This is vital for all of us, regardless of age, sex, or fitness
level, and regardless of whether your primary goal is toning, health
maintenance, or more energy for daily activities.
Proper exercise, including a low fat diet, strength training and aerobic
exercise, tones and conditions the muscles we use every day to stand,
walk, lift and turn. It can actually transform our body composition by
reducing body fat and increasing the proportion of lean muscle in
our bodies. Using the treadmill will help in reducing body fat and
increasing cardiovascular endurance.
Be sure to read through this Owner’s Manual carefully.
It is the authoritative source of information about your New Balance
Treadmill.
Retain this manual for future reference.
COMMENTS OR QUESTIONS
ORDERING REPLACEMENT PARTS
Dear Customer,
When ordering parts, please contact our
Parts Department, toll free at 1-800-497-5831,
Monday through Friday, 8:30am to 8:00pm, EST.
Congratulations on your purchase of the New
Balance Treadmill.
We’re sure that you will be completely satisfied
with the product and we invite your comments so
that we can hear about your success.
Please write or call our Customer Service Specialists
at the address or phone number listed below, or
contact us on our web site or email us with any
comments or questions you may have.
NEW BALANCE 1600/1800 Treadmill
Customer Service Department
1400 Raff Road SW, Canton OH 44750-0001
1-800-292-5009, Monday through Friday
8:30am to 8:00pm, Eastern Standard Time
Please do not call the above number for Parts. See
Ordering Replacement Parts section to the right.
IMPORTANT: You must have your serial number
and this manual ready when calling for parts.
Serial #: ____________________________
Please also provide the following information:
1) Name, Mailing Address and Telephone Number
2) Date of Purchase
3) Where Product was Purchased
(Name of Retail Store, City)
4) Model Number (NBT1600-2/NBT1800-2)
5) Part Order Number and Description
Email: customersupport@newbalancefitness.com
www.newbalancefitness.com
All details depicted in this Owner’s Manual, and of the
product itself, are subject to change without notice.
3
UNIT WARNING LABELS/SPECIFICATIONS & PARTS
Important: See below for placement of the following warning/caution labels on your Treadmill.
WARNING LABEL 1
WARNING LABEL 2
WARNING
WARNING
FAILURE TO READ AND
FOLLOW THE SAFETY
INSTRUCTIONS STATED IN
THE OWNER’S MANUAL
MAY RESULT IN POSSIBLE
SERIOUS INJURY OR
DEATH. KEEP CHILDREN
AWAY. MAXIMUM USER
WEIGHT 325/350 LBS.
REPLACE THIS LABEL IF
DAMAGED, ILLEGIBLE
OR REMOVED. CLASS HC.
RISK OF ELECTRICAL
SHOCK. THIS UNIT IS TO
BE USED ONLY
INDOORS AND IN A
DRY LOCATION.
Computer
Left
Console
•
Safety Key
•
ALWAYS UNPLUG
THE POWER CORD
IMMEDIATELY
AFTER USE.
Right
Console
Pulse
Sensors
•
•
Hand Grip
•
WARNING
Pulse
Sensors
•
CRUSH HAZARD.
KEEP HANDS CLEAR OF DECK.
FAILURE TO DO SO COULD RESULT
IN CRUSHED HANDS.
•
Fan
WARNING
LABEL 1
WARNING
LABEL 2
CAUTION LABEL 1
CAUTION
FRONT
Upright
Power Cord
•
Front Motor
Cover
Foot
Rail
•
Rear End
Cap
Side Cap
Walking
Belt
•
•
Walking Deck
Belt Adjustment
Knob
•
•
Suspension
REAR
•
•
•
WARNING
LABEL 3
•
CAUTION
LABEL 1
Wheel
New Balance 1600/1800 Specifications:
Approximate:
Length: 75”
Width: 35 3/4”
Height: 54 1/2”
Product Weight: 254 lbs.
Maximum User Weight: 1600 - 325 lbs.
1800 - 350 lbs.
4
Console
Base
•
WARNING LABEL 3
BEFORE FOLDING THE
TREADMILL, DECREASE
INCLINE TO "0" LEVEL.
FAILURE TO DO SO MAY
RESULT IN SERIOUS
DAMAGE TO TREADMILL
AND VOID WARRANTY.
•
TROUBLESHOOTING GUIDE
PROBLEM
CAUSE
CORRECTION
1. Not plugged in
2. Not turned on
3. Safety Key not on correctly
Treadmill will not start
4. Circuit Breaker opened in home
5. Treadmill Circuit Breaker tripped
1. Plug into three prong grounded outlet
2. Turn on the Main Power, on/off button
3. Put Safety Key on Console where
indicated
4. Reset home breaker
5. Reset Treadmill Circuit Breaker
(see below)
Treadmill Speed Not Correct
1. Treadmill starts at 0.5 calibrated
in miles – 0.8 calibrated in Kilometers
1. With Monitor powered off, press & hold the
Select button for 4 sec. to adjust reading
Treadmill Speed Surges
1. Walking Belt slipping
2. Lubricate Walking Belt
3. Motor Controller not set properly
1. Tighten Walking Belt (see page 13)
2. Lubricate Belt and Deck (see page 14)
3. Call 800-497-5831 for service
Treadmill Belt will not move ERR 1 on screen
1. Lost speed input signal
1. Call 800-497-5831 for service
Incline will not operate ERR 3 on screen
1. Lost incline signal
1. Remove and replace Safety Key and
Treadmill will recalibrate
Treadmill Belt Slipping
1. Walking Belt loose
2. Deck needs lubrication
1. Tighten Walking Belt (see page 13)
2. Lubricate Belt and Deck (see page 14)
Treadmill Noisy
1. Loose hardware
2. Motor straining
1. Tighten all visible Screws, Nuts, and Bolts
2. Check Belt tension - 3 finger test
(see page 13)
3. Adjust Rear Rollers - check for tension
(see page 13)
3. Clicking sound - Roller knocking
1. Too much hand movement
Inaccurate pulse rate
2. Palms too wet
3. Gripping hand grips too tight
4. Wearing rings
Inaccurate heart rate strap
1. Electrical interference
1. Stand on Side Rails to get accurate pulse
reading - OR - Must have two hands on grips
2. Dry palms
3. Grip using moderate pressure
4. Remove all rings
1. Keep at least six feet away from
Televisions, Computers and
Fluorescent Lights
CAUTION
safety switch
on/off switch
power cord
10
The Treadmill will shut off when the electricity load is above it’s
capacity (example: power surge or storm). To restart the Treadmill,
please follow the procedure below:
A. Unplug the power cord from the Treadmill’s socket.
B. Push in the safety switch.
C. Plug the power cord back into the Treadmill’s socket.
NOTE: DON'T PUSH IN THE SAFETY SWITCH BEFORE
UNPLUGGING THE TREADMILL’S POWER CORD.
29
4. Back Stretch
Stand with your legs shoulder width apart and your knees slightly
bent. Bend forward from your waist with your arms extending
loosely in front of your body. Gently bend from the waist flexing
your body as far forward as it will go.
Hold for 20 to 30 seconds. Straighten up and repeat.
5. Standing Hamstrings Stretch
Stand with your legs hip-width apart. Extend one leg out in
front of you and keep that foot flat against the ground. With
your hands resting lightly on your thighs, bend your back leg
and lean forward slightly from your hips until you feel a stretch
in the back of your thigh. Be sure to lean forward from the hip
joint rather than bending at your waist.
Hold for 20 to 30 seconds. Repeat for the opposite leg.
6. Buttocks, Hips and Abdominal Stretch
Lay flat on your back with your hips relaxed against the floor.
Bend one leg at the knee. Keeping both shoulders flat on the
floor, gently grasp the bent knee with your hands and pull it over
your body and towards the ground. You should feel a stretch in
your hips, abdominals and lower back.
Hold for 20 to 30 seconds and release. Repeat for opposite side.
7. Inner Thigh Stretch
Sit on the floor and bend your legs so that the soles of your feet
are together. Place your elbows on your knees. Lean forward
from the waist and press down lightly on the inside of your knees.
You should feel a stretch in the muscles of your inside thigh.
Hold for 20 to 30 seconds and release.
8. Arm Pullback
Stand with your feet shoulder width apart and toes pointing
forward and with your knees slightly bent. Let your arms hang
relaxed on either side of your body. Expand your chest and pull
your shoulders back. Bend your elbows slightly and clasp your
hands behind your back. Slowly straighten your arms as you lift
your hands upward. Raise your hands upward until you feel mild
tension in your shoulder and chest region.
Hold for 20 to 30 seconds. Lower your arms to their original
position and bend your elbows. Release your hands and return
them to your sides.
28
WARNING LABEL 4
WARNING
WARNING
LABEL 5
safety switch
WARNING
LABEL 4
CRUSH HAZARD.
KEEP HANDS AND FEET CLEAR
DURING FOLDING. FAILURE TO DO
SO COULD RESULT IN CRUSHED
HANDS AND FEET.
WARNING LABEL 5
WARNING
on/off switch
power cord
ALWAYS UNPLUG THE
POWER CORD IMMEDIATELY
AFTER USE.
WARNING LABEL 6
WARNING
After folding the
deck, push and turn
the knob clockwise
on the latch to lock
the deck into place.
Failure to lock the
deck into place may
cause the deck to
fall suddenly
resulting in serious
injury.
Before lowering the
deck from its folded
position, turn the
knob counter
clockwise and pull
the knob on the
latch to unlock and
release the deck.
Slowly lower the
deck to the floor
and keep your
hands and feet
clear to avoid
crushing or other
serious injury.
WARNING
LABEL 6
5
ASSEMBLY/SETUP INSTRUCTIONS
WARNING
DO NOT MOVE TREADMILL OUT OF
THE BOX UNTIL UNIT IS ASSEMBLED.
For Maximum Effectiveness and Safety,
Please Read This Owner’s Manual
Before Assembling or Using Your
New Balance 1600/1800 Treadmill.
COLLAPSE BOX BOTTOM AND LAY
SIDES DOWN BEFORE ASSEMBLY.
WHEN MOVING ASSEMBLED
TREADMILL OUT OF THE BOX, MOVE
IT OUT OF THE BOX ON ITS WHEELS
WHILE THE DECK IS IN THE FOLDED
AND LOCKED POSITION.
NOTE: All location references, such as front, rear,
left or right, made in these instructions are from the
user position – on the Treadmill facing the Console.
FAILURE TO FOLLOW THIS
PROCEDURE MAY RESULT IN
SERIOUS INJURY.
Parts Box
Fastener Pack
Tools Required: (included)
allen wrench
Allen Wrench
Multi Hex Tool with
Phillips Screwdriver
M8 x 20mm allen bolt (6)
M8 washer (2)
multi hex tool
with phillips
screwdriver
power cord
M8 curved washer (4)
M4 x 6mm phillips screw (6)
side cap (2)
6
safety key
WARM UP & COOL DOWN STRETCHES
Stretches can help improve flexibility and relieve the tightness in muscles
that results from repetitive sport movements that require a limited range
of motion. 10 to 12 minutes of daily stretching is recommended. This can
be done when warming up or cooling down. When performing these
stretches, your movements should be slow and smooth, with no bouncing
or jerking. Move into the stretch until you feel a slight tension, not pain, in
the muscle and hold the stretch for 20 to 30 seconds. Breathe slowly and
rhythmically. Be sure not to hold your breath. Remember that all stretches
must be done for both sides of your body.
1. Quadriceps Stretch
Stand close to a wall, chair or other solid object. Use one hand
to assist your balance. Bend the opposite knee and lift your heel
towards your buttocks. Reach back and grasp the top of your
foot with the same side hand. Keeping your inner thighs close
together, slowly pull your foot towards your buttocks until you
feel a gentle stretch in the front of your thigh. You do not have
to touch your buttocks with your heel. Stop pulling when you
feel the stretch. Keep your kneecap pointing straight down and
keep your knees close together. (Do not let the lifted knee swing
outward.)
Hold the stretch for 20 to 30 seconds. Repeat for the other leg.
2. Calf and Achilles Stretch
Stand approximately one arms length away from a wall or chair
with your feet hip-width apart. Keeping your toes pointed forward, move one leg in close to the chair while extending the
other leg behind you. Bending the leg closest to the chair and
keeping the other leg straight, place your hands on the chair.
Keep the heel of the back leg on the ground and move your
hips forward. Slowly lean forward from the ankle, keeping your
back leg straight until you feel a stretch in your calf muscles.
Hold for 20 to 30 seconds. Repeat for the opposite leg.
3. Overhead/Triceps Stretch
Stand with your feet shoulder width apart and your knees slightly
bent. Lift one arm overhead and bend your elbow, reaching
down behind your head with your hand toward the opposite
shoulder blade. Walk your fingertips down your back as far as
you can. Hold this position. Reach up with your opposite hand
and grasp your flexed elbow. Gently assist the stretch by pulling
on the elbow.
Hold for 20 to 30 seconds. Repeat for the opposite arm.
27
HEART RATE TARGET ZONE
FOR CARDIOVASCULAR FITNESS
TABLE 1
200
195
190
190
185
180
180
175
170
170
165
Heart 160
Rate
(Beats/
150
Min)
140
165
161
160
157
155
153
148
150
144
145
140 Maximum
Attainable
Heart Rate
140
136
136
133
131
129
130
127
129
123
129
119
120
115
119
112
108
110
100
20
105
25
30
35
40
45
50
55
60
65
70
101
98
75
70%
Target
80 Zone
AGE (YRS)
TABLE 2
Exercise
Week
1&2
3&4
5&6
7&8
9 & 10
11 & 12
26
Warm Up
Period
5
5
5
5
5
5
min
min
min
min
min
min
THR%
Minutes
60-65%
65-70%
70-75%
70-80%
70-85%
70-85%
-8
-10
-15
-20
-25
-25
Cool Down
Period
5
5
5
5
5
5
min
min
min
min
min
min
Total
Time
17
20
25
30
35
35
min
min
min
min
min
min
85%
Target
Zone
Sessions
Per Wk.
3
3
3
3
3
3
Total Time
Per Wk.
51
60
75
90
105
105
min
min
min
min
min
min
Note: We recommend setting up the
unit in the area where it will be used.
Remove Box Top. Collapse Box Bottom
and leave unit in box to assemble.
STEP 1 - Upright Assembly
a) Stand on Walking Belt and grip the
uprights and slowly raise them into
the assembled position. Secure the
right side with (2) M8 x 20mm Allen
Bolts, (1) M8 Washer and (1) M8
Curved Washer at the bottom of the
right Upright as shown in Figure 1.
Repeat on other side.
b) Use the Allen Wrench
provided to tighten.
M8 curved
washer
M8 washer
upright
walking belt
M8 x 20mm allen bolt
RIGHT SIDE
Figure 1 - Install Uprights
STEP 2 - Console Base Assembly
Note: To assure Console Base Assembly does
not fall, hold onto Hand Grips while assembling.
a) Make sure the wires are connected on the
right side. See Figure 2a.
b) While standing on the Walking Belt put the
Console Base Assembly in the user position by
pivoting it carefully down. See Figure 2b.
Note: During assembly, DO NOT
PINCH WIRES when the
M8 curved
Console is folded down
washer
and secured to the Upright.
M8 x 20mm
c) Attach the Console
allen bolt
Base Assembly to the
Uprights by using an
M8 x 20mm Allen Bolt
and M8 Curved Washer.
Repeat on other side.
Tighten with Allen Wrench
provided. See Figure 2c.
console
base
assembly
2b
hand
grip
2a
upright
2c
Figure 2 - Install Console Base
7
side cap
STEP 3 – Side Cap Assembly
a) Attach Side Cap with (3) M4 x 6mm Phillips
Screws at the bottom of the Upright.
Repeat on other side.
b) Use the Multi Hex Tool with Phillips
Screwdriver provided to tighten.
upright
M4 x 6mm
phillips screws
Figure 3 - Install Side Caps
Assembly is now complete.
IMPORTANT:
Follow the “Setting Up Treadmill For Use”
instructions on the next two pages to move
the Treadmill off the shipping carton so you
may begin your workout.
8
40 year old to get a cardiovascular effect, the
individual would need to keep their heart rate
at or above 126 beats per minute to get a
cardiovascular effect. Note: Although 70% was
used in this example, the heart rate range needed
to achieve results falls between 60% and 85% of
your maximum heart rate.
If you are just beginning your exercise program,
your target heart rate range should be roughly at
60% of your maximum heart rate. As you become
more conditioned (or if you are already in good
cardiovascular shape) you can increase your
target heart rate to 70%-85% of your maximum
heart rate. Remember, your target heart rate is
only a guide.
When checking heart rate during a workout, take
your pulse within five seconds after interrupting
exercise because it starts to go down once you
stop moving. Count pulse for 10 seconds and
multiply by six to get the per-minute rate.
CLOTHING
All exercise clothing should be loose-fitting to
permit freedom of movement, and should make
the wearer feel comfortable and self-assured.
Never wear rubberized or plastic clothing, such
garments interfere with the evaporation of
perspiration and can cause body temperature
to rise to dangerous levels.
We recommend wearing a workout shoe with a
rubberized sole unless instructed otherwise.
TIPS TO KEEP YOU GOING
1. Adopt a specific plan and write it down.
2. Keep setting realistic goals as you go along,
and remind yourself of them often.
3. Keep a log to record your progress and make
sure to keep it up-to-date. See page 30.
Remember, your New Balance Treadmill also comes
with pulse sensors located on the Console.
4. Include weight and/or percent body fat
measures in your log. Extra pounds can easily
creep back.
When used properly, the unit pulse sensors
can help you to determine your estimated
heart rate. To do so:
5. Upgrade your fitness program as you progress.
Your Treadmill provides different workout
programs to keep your workouts challenging.
1. Push the start button on your Computer.
6. Enlist the support and company of your family
and friends.
2. Gently grab both metal pulse sensors on
both handlebars. Wait 6 seconds.
3. Your estimated heart rate range will be
displayed on screen. Check the chart on the
following page to see if you are within your
range according to your age.
7. Update others on your successes.
8. Avoid injuries by pacing yourself and including
a warm up and cool down period as part of
every workout. See page 24.
9. Reward yourself periodically for a job well done!
When used properly, the heart rate pulse
sensors and display monitor provide a
reasonably accurate estimate of your
actual heart rate. This estimate is not exact
and persons with medical conditions and/or
a specific need for accurate heart rate
monitoring should not rely on the
estimations provided.
By using the chart on the next page you can see
where your heart rate falls in the minimum and
maximum target zones.
The above are guidelines, people with any
medical limitations should discuss this formula
with their physician.
25
described previously. Each workout should begin
with a warm up and end with a cool down. As a
general rule, space your workouts throughout the
week and avoid consecutive days of hard
exercise.
Here are the amounts of activity necessary for the
average healthy person to maintain a minimum
level of overall fitness. Included are some of the
popular exercises for each category.
WARM UP – 5 -10 minutes of exercise such as
walking, slow jogging, knee lifts, arm circles or
trunk rotations. Low intensity movements that
simulate movements to be used in the activity
can also be included in the warm up.
MUSCULAR STRENGTH – a minimum of two, 20
minute sessions per week that include exercises for
all the major muscle groups. Lifting weights is the
most effective way to increase strength.
MUSCULAR ENDURANCE – at least three, 30 minute
sessions each week that include exercises such as
calisthenics, push ups, sit ups, pull ups, and weight
training for all the major muscle groups.
CARDIORESPIRATORY ENDURANCE – at least
three, 20 minute workouts of continuous aerobic
exercise each week. Working out on your Treadmill
is a good way to obtain this aerobic activity. Other
popular aerobic conditioning activities include brisk
walking, jogging, swimming, cycling, rope jumping,
rowing, cross-country skiing, and some continuous
action games like racquetball and handball.
FLEXIBILITY – 10 -12 minutes of daily stretching
exercises performed slowly, without a bouncing
motion. This can be included after a warm up or
during a cool down. Refer to pages 27 and 28
for a list of total body stretches.
COOL DOWN – a minimum of 5 -10 minutes of
slow walking or lower intensity elliptical exercise,
combined with stretching.
AEROBIC EXERCISE:
HOW MUCH? HOW OFTEN?
Experts recommend that you do some form of
aerobic exercise at least three times a week for a
minimum of 20 continuous minutes. Of course, if
that is too much, start with a shorter time span and
gradually build up to the minimum. Then gradually
progress until you are able to work aerobically for
20 - 40 minutes. If you want to lose weight, you may
want to do your aerobic workout five times a week.
It is important to exercise at an intensity vigorous
enough to cause your heart rate and breathing to
increase. How hard you should exercise depends to
24
a certain degree on your age, and is determined
by measuring your heart rate in beats per minute.
Refer to the “Measuring Your Heart Rate” section
below and on the following page for more
information on how to determine and measure
your heart rate.
You can do different types of aerobic activities, say
walking one day, and use your Treadmill the next.
Make sure you choose an activity that can be
done regularly, and is enjoyable for you. The important thing to remember is not to skip too many days
between workouts or fitness benefits will be lost. If
you must lose a few days, gradually work back into
your routine.
WHEN TO EXERCISE
The hour just before the evening meal is a popular
time for exercise. The late afternoon workout
provides a welcome change of pace at the
end of the work day and helps dissolve the day's
worries and tensions.
Another popular time to work out is early
morning, before the work day begins. Advocates
of the early start say it makes them more alert
and energetic on the job.
Among the factors you should consider in
developing your workout schedule are personal
preference, job and family responsibilities,
availability of exercise facilities and weather. It's
important to schedule your workouts for a time
when there is little chance that you will have to
cancel or interrupt them because of other
demands on your time.
You should not exercise strenuously during
extremely hot, humid weather or within two
hours after eating. Heat and/or digestion both
make heavy demands on the circulatory system,
and in combination with exercise can be an
over-taxing double load.
MEASURING YOUR HEART RATE
(see chart on page 26)
Heart rate is widely accepted as a good method
for measuring intensity during running, swimming,
cycling, and other aerobic activities. Exercise that
doesn't raise your heart rate to a certain level and
keep it there for 20 minutes won't contribute
significantly to cardiovascular fitness.
The heart rate you should maintain is called your
Target Heart Rate. There are several ways of arriving
at this figure. One of the simplest is: maximum heart
rate (220 - age) x 70%. Thus, the target heart rate for
a 40 year-old would be 126. In this example for this
SETTING UP TREADMILL FOR USE
knob
locking
indicator
STEP 1 – Folding the Treadmill to allow
removal of the shipping box.
STEP 2 – Moving the Treadmill
After assembly is complete, you must fold and
move the Treadmill to remove the box.
Hold the Hand Grips to move the Treadmill forward
or backward off of the box. The Treadmill comes
with Wheels for easy portability.
To fold the Treadmill, raise the Deck. Secure the
Deck in the upright position by pushing the Knob
in while rotating it clockwise until the Locking
Indicator is fully visible.
(in folded position)
DO NOT TIP the Treadmill.
9
CAUTION
TO REDUCE THE RISK OF DAMAGING ELECTRICAL PARTS TO
YOUR TREADMILL, WE STRONGLY RECOMMEND THAT YOU
PLUG YOUR TREADMILL INTO A DEDICATED 20 AMP OUTLET,
WITHOUT THE USE OF AN ADDITIONAL EXTENSION CORD.
PLEASE NOTE THAT THIS TREADMILL IS NOT
COMPATIBLE WITH GFCI-EQUIPPED OUTLETS.
IF YOUR TREADMILL HAS BEEN EXPOSED TO COLDER
TEMPERATURES, WE RECOMMEND THAT THE TREADMILL IS
WARMED UP TO ROOM TEMPERATURE BEFORE FIRST TIME
USE. FAILURE TO DO SO MAY CAUSE ELECTRONIC FAILURE.
locking
indicator
indica
not visable
safety switch
on/off switch
WARNING
CRUSH HAZARD.
KEEP HANDS CLEAR OF DECK.
FAILURE TO DO SO COULD RESULT
IN CRUSHED HANDS.
power cord
STEP 3 – Lowering the Walking Deck
STEP 4 – Power Cord Assembly
Once the Treadmill is in the desired place, lower
the Deck by pushing in and turn the Knob counterclockwise until the Locking Indicator is not visible
and the Deck is released.
Attach Power Cord to Front Motor Cover and plug
unit cord into a dedicated outlet.
NOTICE: This Treadmill has a built-in safety feature to
help the Deck lower slowly when unfolding. Please
make sure there are no children or other things under
the Deck when you lower it.
Turn the ON/OFF switch to the ON position.
STEP 5 – Turning On the Treadmill
ASSEMBLY AND SETUP ARE
NOW COMPLETE.
IMPORTANT:
Please read your owner’s manual before
beginning your workout for important
instructions on how to use your Treadmill.
10
EXERCISE GUIDELINES
IMPORTANT
Please review this section before you begin exercising.
IMPORTANT:
If you are over 35 and have been inactive
for several years, you should consult your
physician, who may or may not recommend
a graded exercise test.
If you are just beginning your exercise program,
your target heart rate range should be roughly at
60% of your maximum heart rate. As you become
more conditioned (or if you are already in good
cardiovascular shape) you can increase your
target heart rate to 70%-85% of your maximum
heart rate. Remember, your target heart rate is
only a guide.
You should also consult your physician if you
have the following:
• High blood pressure
• High cholesterol
• Asthma
• Heart trouble
• Family history of early stroke or
heart attack deaths
• Frequent dizzy spells
• Extreme breathlessness after mild exertion
• Arthritis or other bone problems
• Severe muscular, ligament or
tendon problems
• Other known or suspected disease
• If you experience any pain or tightness
in your chest, an irregular heartbeat or
shortness of breath, stop exercising
immediately. Consult your physician
before continuing.
KNOWING THE BASICS
Physical fitness is most easily understood by
examining its components, or "parts".
There is widespread agreement that these
five components comprise the basics of
physical training:
CARDIORESPIRATORY ENDURANCE – the ability
to deliver oxygen and nutrients to tissues, and to
remove wastes, over sustained periods of time.
Using your Treadmill will improve this.
MUSCULAR STRENGTH – the ability of a muscle to
exert force for a brief period of time. Upper-body
strength, for example, can be measured by various
weight-lifting exercises.
MUSCULAR ENDURANCE – the ability of a muscle,
or a group of muscles, to sustain repeated contractions or to continue applying force against a fixed
object. Push ups are often used to test endurance
of arm and shoulder muscles.
FLEXIBILITY – the ability to move joints and use
muscles through their full range of motion. The sitand-reach test is a good measure of flexibility of
the lower back and backs of the upper legs.
BODY COMPOSITION – often considered a component of fitness. It refers to the makeup of the body
in terms of lean mass (muscle, bone, vital tissue and
organs) and fat mass. An optimal ratio of fat to lean
mass is an indication of fitness, and the right types
of exercises will help you decrease body fat and
increase or maintain muscle mass. To help track
your progress we have provided Workout Progress
Chart on page 30.
• Pregnant
A COMPLETE EXERCISE PROGRAM
• Balance impairment
How often, how long and how hard you exercise,
and what kinds of exercises you do should be
determined by what you are trying to accomplish.
Your goals, your present fitness level, age, health,
skills, interest and convenience are among the
factors you should consider. For example, an
athlete training for high-level competition would
follow a different program than a person whose
goals are good health and the ability to meet
work and recreational needs.
• Taking medications that affect heart rate
Your exercise program should include something
from each of the four basic fitness components
23
17. User Program 2: Same as User Program 1.
18. User Program 3: Same as User Program 1.
19. Weight Loss Heart Rate Program: The user must
wear the Heart Rate Chest Strap to use this
program. After the program is confirmed, using
the arrow keys, the user enters his/her age. Note
that Age is blinking in the Time window. Target
Heart Rate (THR) is computed at 65% of maximum (220 - AGE) and appears in the Heart Rate
window. THR can be changed at this time using
the Elevation keys. Press START and the Treadmill
Belt starts at 0.5mph, and the user controls the
Speed. After a 3-1/2 minute warm-up, the Incline
begins to adjust at a rate of 1% every 30 seconds
until the Target Heart Rate Zone is reached (THR
+- 5BPM). If the THR zone is exceeded, the Incline
declines at a rate of 1% every 30 seconds until
the Heart Rate is in the THR zone.
20. Cardio Heart Rate Program: The user must wear the
Heart Rate Chest Strap to use this program. After
the program is confirmed, using the arrow keys,
the user enters his/her age. Note that Age is
blinking in the Time window. Target Heart Rate
(THR) is computed at 80% of maximum (220 AGE) and appears in the Heart Rate window. THR
can be changed at this time using the Elevation
keys. Press START and the Treadmill Belt starts at
0.5mph, and the user controls the speed. After
a 3-1/2 minute warm-up, the Incline begins to
adjust at a rate of 1% every 30 seconds until the
Target Heart Rate Zone is reached (THR +- 5BPM).
If the THR zone is exceeded, the Incline declines
at a rate of 1% every 30 seconds until the Heart
Rate is in the THR zone.
Odometer: An Odometer showing accumulated
Distance will appear in the Time window for one
second when the Safety Key is placed on the
Computer.
Re-Start: If the Treadmill is stopped during use, when
the START button is pressed again, the Treadmill will
ramp-up the Speed to where it was stopped. If the
Treadmill is stopped for 5 minutes or more, POWER is
lost and the Treadmill will have to be re-started.
Time-Out: If the Treadmill is turned on, and the Belt
is not moving, the Computer will shut-off after five
minutes.
1600
USING THE PULSE FUNCTION
1800
The Pulse Window on your Computer works in
conjunction with the Pulse Sensors found on the
Console. When you are ready to read your pulse:
1. Place both hands firmly on the Pulse Sensors.
For the most accurate reading, it is important
to use both hands.
2. Look at your Pulse Window. The “P” will begin
to blink.
3. Your estimated heart rate will appear in the
window approximately 6 seconds after you
grasp the Pulse Sensors.
4. Refer to the Target Heart Rate Zone Chart
found on page 26 of this manual. For additional
information about the importance of working
within certain heart rate ranges, see pages
24-25 – Measuring Your Heart Rate.
5. This estimate is not exact and persons with
medical conditions and/or a specific need for
accurate heart rate monitoring should not rely
on the estimations provided.
22
Pulse Sensors
When used properly, the heart rate pulse sensors
and display monitor provide a reasonably
accurate estimate of your actual heart rate. This
estimate is not exact and persons with medical
conditions and/or a specific need for accurate
heart rate monitoring should not rely on the
estimations provided.
FOLDING AND MOVING YOUR TREADMILL FOR STORAGE
knob
locking
indicator
indica
not visable
locking
indicator
TO FOLD THE TREADMILL
You may fold the Treadmill into the upright position
for storage.
CAUTION
BEFORE FOLDING THE
TREADMILL, DECREASE
INCLINE TO "0" LEVEL.
FAILURE TO DO SO MAY
RESULT IN SERIOUS
DAMAGE TO TREADMILL
AND VOID WARRANTY.
NOTE: Make sure the Treadmill's
elevation is at the lowest position.
Press the Incline - Key until Incline
is at “0” level. If the elevation is not
at the lowest position, it would cause
damage to the mechanism.
TURN OFF AND UNPLUG FIRST!
To fold the Treadmill, raise the
Deck. Secure the Deck in the
upright position by pushing the Knob in while
rotating it clockwise until the Locking Indicator is
fully visible.
WARNING
CRUSH HAZARD.
KEEP HANDS CLEAR OF DECK.
FAILURE TO DO SO COULD RESULT
IN CRUSHED HANDS.
TO LOWER THE TREADMILL
To lower the Deck, push in and turn the Knob
counter-clockwise until the Locking Indicator is not
visible and the Deck is released.
NOTICE: This Treadmill has a built-in safety feature to
help the Deck lower slowly when unfolding. Please
make sure that nothing is under the Deck, especially
children or pets, when you lower it.
11
TO MOVE THE TREADMILL
(in folded position)
Always make sure the Treadmill is turned off and
unplugged first!
Hold the Hand Grips to move the Treadmill forward
or backward. The Treadmill comes with Wheels for
easy portability.
DO NOT TIP the Treadmill.
12
1800
PROGRAMS
ON/OFF SWITCH: Turn on the ON/OFF switch located on
the front of the Treadmill. The switch will light up if there
is power to the Treadmill.
PRESS POWER: This turns the Computer power on. The
Treadmill Belt will not start unless POWER is pressed first.
WT will appear in the dot matrix and the previous user
weight will appear in the Calories window. Enter weight
of user using the Speed or Incline arrows. Press ENTER to
confirm weight.
MANUAL MODE: If you elect to operate the Treadmill in
Manual Mode, press START. The Treadmill will start at
0.5mph after a 3,2,1 countdown.
PROGRAM MODE: After pressing POWER, press the desired
program using the program Quick Keys or press SELECT
to choose one of the 18 programs. Note: The program
layout appears in the dot matrix display. Press ENTER to
verify the selection. Press START to begin the program. All
programs have ten, one-minute segments. The program
repeats the ten, one-minute segments until the user
presses STOP. An explanation of the programs follow:
1. Hill Walk: This is an elevation program that goes from
0% to 3% grade. The speed is controlled by the user
and the Treadmill will start at 0.5mph. Each minute,
the elevation changes.
2. Mountain Pass: This is an elevation program that
goes from 0% to 5% grade. The speed is controlled
by the user.
3. Pikes Peak: This is a challenging elevation program
that goes from 0% to 7% grade. The speed is
controlled by the user.
4. Fat Burn: This is an interval elevation program where
the elevation alternates between 0% and 5%. The
user controls the speed.
5. Walking: This is a speed program that varies between
2.5mph and 3.3mph. This is an excellent program for
intermediate walkers. The user controls the elevation.
6. Jogging: This is a speed program that varies the
speed between 4.0mph and 4.8mph. This is a good
program for beginner joggers and very fast walkers.
The user controls the elevation.
7. Cardio Burn: This is an interval elevation program
that alternates between 3% and 8%. The user
controls the speed.
8. Walking Interval: This is an interval speed program
that has alternating rest and work intervals. The
defaults are 2.5mph and 3.0mph. When a lower
interval is changed, all the lower, or rest intervals
go to this value. When the higher, or work interval
is changed, all the work intervals go to this value.
The user controls the incline.
9. Jogging Interval: This is an interval speed program
that has alternating rest and work intervals. The
defaults are 5.0mph and 6.0mph. When a lower
interval is changed, all the rest intervals go to this
value. When the higher, or work interval is changed,
all the work intervals go to this value. The user
controls the incline.
10. Hill Interval: This is an interval elevation program
that has alternating rest and work intervals. The
defaults are 0% and 3%. When a lower interval
is changed, all the rest intervals go to this value.
When the higher, or work interval is changed,
all the work intervals go to this value. The default
speed is 2.0mph. The speed is controlled by
the user.
11. Mountain Interval: This is an interval elevation program that has alternating rest and work intervals.
The defaults are 1% and 7%. When a lower interval
is changed, all the rest intervals go to this value.
When the higher, or work interval is changed, all
the work intervals go to this value. The default
speed is 2.0mph. The speed is controlled by
the user.
12. Target Distance: This program counts down the
distance goal that the user sets before exercising.
After confirming the program, the user enters the
distance goal using the Speed or Incline arrow
keys. Increments are 0.5 miles. Press ENTER to
confirm the distance goal, press START, the
Treadmill Belt starts and the user controls the
Speed and Incline. The distance will count
down in the Distance window.
13. Target Calories: This program counts down the
calorie goal that the user sets before exercising.
After confirming the program, the user enters the
calorie goal using the Speed or Incline arrow
keys. Increments are 10 calories. Press ENTER to
confirm the calorie goal, press START, the Treadmill
Belt starts and the user controls the Speed and
Incline. The calorie goal will count down in the
Calories window.
14. Target Time: This program counts down the time
goal that the user sets before exercising. After
confirming the program, the user enters the
time goal using the Speed or Incline arrow keys.
Increments are 1 minute. Press ENTER to confirm
the time goal, press START, the Treadmill Belt starts
and the user controls the Speed and Incline. The
time goal will count down in the Time window.
15. Target Elevation Gain: This program counts down
the Elevation Gain goal that the user sets before
exercising. After confirming the program, the user
enters the Elevation Gain goal using the Speed
or Incline arrow keys. Increments are 10 feet. Press
ENTER to confirm the Elevation Gain goal, press
START, the Treadmill Belt starts and the user
controls the Speed and Incline. The Elevation
Gain goal will count down in the Elevation
Gain window.
16. User Program 1: After selecting one of the User
Programs, press ENTER to confirm. Press ENTER
again and adjust the Speed and Incline for
segment one and press ENTER. Continue to adjust
the Speed and Incline for each segment and
press ENTER. Press START to begin the workout. If a
Speed or Incline value is changed during usage,
the Computer will store the value of the Speed
and Incline at the end of each segment and will
retain these values.
continued on next page
21
DISPLAY FUNCTION
1800
Please read carefully before using the Treadmill.
INCLINE/PULSE: Displays pulse
rate except when elevation
is changed or SELECT key is
pressed. To get a pulse rate,
place both of your hands
on the Pulse Grip Bars. It is
recommended to straddle
the Walking Belt to get an
accurate reading. If you
are walking or jogging, it is
difficult for the Computer
to accurately read your
pulse rate. (See page 22
for more details.)
TIME: Shows workout Time. Time begins at 00:00 and counts up.
The maximum time is 99:99. When the Safety Key is first attached
to the Computer, this display shows the accumulated Distance
(odometer) for one second.
PACE: Shows minutes per mile.
SPEED: Displays the Speed
the Treadmill Belt is moving.
DISTANCE: Displays the Distance,
in miles or kilometers, the
Treadmill Belt has gone on
the current workout.
DOT MATRIX: The 12 x 10 dot matrix reflects Incline
on the Elevation Programs (Programs 1-4, 7, 10-11)
and Speed on the Speed Programs (Programs 5-6,
8-9) and the User Programs. On Programs 12-15
and in the Manual Mode, the dot matrix displays
a 1/4 mile running track. On the Heart Rate
programs, a beating heart is displayed.
PROGRAM 8
PROGRAM 4
FAT BURN
MANUAL
WALKING
20
CARDIO BURN
PROGRAM 17
MOUNTAIN INTERVAL
USER 2
PROGRAM 18
PROGRAM 14
PROGRAM 11
PROGRAM 7
PIKES PEAK
USER 1
TARGET CALORIES
TARGET TIME
HILL INTERVAL
JOGGING
PROGRAM 20
PROGRAM 16
TARGET DISTANCE
PROGRAM 13
JOGGING INTERVAL
PROGRAM 10
PROGRAM 6
MOUNTAIN PASS
PROGRAM 3
ELEVATION GAIN: To display Elevation in feet, the user
has climbed during the current workout, press
SELECT and the value will display for three seconds.
PROGRAM 12
WALKING INTERVAL
PROGRAM 9
PROGRAM 5
HILL WALK
PROGRAM 2
CALORIES/HR: During your workout, press Select to
show the Calories you could burn per hour.
PROGRAM FUNCTION
1800
PROGRAM 1
CALORIES: Displays Calories consumed. The Calorie
Calculation is based on a 150 pound person.
PROGRAM 15
TARGET ELEVATION GAIN
USER 3
PROGRAM 19
WEIGHT LOSS HEART RATE
CARDIO HEART RATE
TAKING CARE OF YOUR TREADMILL
WARNING: Always turn off and unplug the Treadmill
from the electrical outlet before moving, cleaning,
lubricating, or servicing the Treadmill.
Note: The Treadmill MUST be placed on a level
surface only. If the Treadmill is not level, the belt
will continuously slip to the low side of the Treadmill.
CAUTION: DO NOT USE Treadmill if it is not on a
level surface.
Have plenty of clearance behind and in front of
your Treadmill. It is important to keep children,
pets, furniture and other objects out of the way
when using your Treadmill. You should have a
minimum of 4 feet of clearance both in front of and
behind your Treadmill and a minimum of 2 feet of
clearance on both sides of the Treadmill.
Worn or damaged components should be replaced
immediately. Do not use the Treadmill if it is not
working properly. Only manufactured-supplied or
approved components shall be used to maintain
and repair the Treadmill. It is the sole responsibility
of the user/owner to ensure that regular maintenance is performed.
WALKING BELT TENSION
Walking Belts tend to stretch slightly with use. The
Walking Belt may occasionally need to be tightened. If the Walking Belt is too loose, you may find
the Belt stops or hesitates while running or walking.
However, it is very important not to over-tighten the
Walking Belt as it will damage the Motor, Rollers,
and Electrical Components.
When properly tensioned, you should be able to
lift the side of the Belt about 2-3 inches, or you
should be able to fit three fingers under the edge
of the Belt. This should be done on either side of
the Belt in the center of the Deck.
turn clockwise. Turn on the Treadmill and check the
tension. If it needs additional tension, continue to
tighten one turn at a time until the Belt is no
longer slipping.
Be sure to adjust both sides equally to insure correct
Belt alignment.
WALKING BELT CENTERING
The Walking Belt may
occasionally need to be
centered. Your Treadmill
has sight indexes that aid in
keeping the Walking Belt
centered.
First, be sure the Belt is
tensioned properly. Then, run
the Treadmill at 4 mph. It is
easiest to use only the Left
Adjustment Knob in making
Walking Belt centering
adjustments.
sight index
(preset at 2)
If the Walking Belt has moved to the right, turn the Left
Adjustment Knob a quarter turn to the left. Let the
Treadmill run about 30 seconds, and if the Belt
does not move, repeat.
If the Walking Belt has moved to the left, turn the Left
Adjustment Knob a quarter turn to the right. Let the
Treadmill run about 30 seconds, and if the Belt does
not move, repeat.
belt
foot rail
To tighten the Belt, with the Treadmill off, turn the
Left Knob at the end of the Treadmill one full turn
clockwise, and then turn the Right Knob one full
13
WARNING: Always turn off and unplug the
Treadmill from the electrical outlet before
cleaning, lubricating, or servicing the Treadmill.
CLEANING
Keeping the Treadmill clean will prolong the life of
the Treadmill and improve performance.
WALKING BELT AND DECK LUBRICATION
Your Treadmill Belt has been lubricated at the
factory, but periodic lubrication will extend the
life of your Treadmill Belt, Board, and Electrical
Components. We recommend the following
lubrication schedule based on weekly usage:
Regularly dust the unit, especially the exposed part
of the Deck between the Belt and the Side Rails.
For best performance, we recommend your
Treadmill be placed on a Treadmill Mat. A Treadmill
Mat will help to keep dust debris away from your
Treadmill's electrical components.
Clean the top of the Belt with a damp cloth. Be
careful to keep liquid away from inside the frame
or underneath the Belt.
5+ hours per week
Monthly
3 - 5 hours per week
Every three months
0 - 3 hours per week
Every six months
LUBRICATION APPLICATION
1.
Put a liberal quantity of lubricant onto foam
side of the Applicator Wand. Apply lubricant
evenly across the foam pad.
foam pad
At least once a year remove the Motor Cover and
vacuum under the Motor Cover.
To remove the Cover: After turning off and unplugging the Treadmill, loosen the screws (you do not
have to remove the screws) on each side (2) and
in the front (2) of the Motor Cover and carefully lift
the Cover off. Be careful, especially around the
wiring on the lower board.
WARNING: Always turn off and unplug the Treadmill
from the electrical outlet before removing the
Motor Cover.
applicator wand
2. Insert the Applicator Wand into the lubrication
port on the right hand side of the Treadmill,
under the Walking Belt with the lubricated side
of the Applicator Wand up, against the Belt.
Slide it completely across the Walking Deck
into the lubrication port on the left side of
the Treadmill.
NOTE: Make sure the Applicator Wand is
securely in the left side lubrication port.
motor
cover
lubrication
port
LEFT SIDE
safety
switch
screw
(2 each side)
on/off switch
power cord
14
screw (3)
applicator
wand
RIGHT
SIDE
3. Start the Treadmill Belt and set the speed at
1.0 mph. Let the Belt run for about 45 seconds
in order to spread the lubrication on the
underneath side of the Belt.
4. Place Applicator Wand in plastic sleeve to
retain moisture.
1600
PROGRAMS
ON/OFF SWITCH: Turn on the ON/OFF switch located on
the front of the Treadmill. The switch will light up if there
is power to the Treadmill.
PRESS POWER: This turns the Computer power on. The
Treadmill Belt will not start unless POWER is pressed first.
WT will appear in the dot matrix and the previous user
weight will appear in the Calories window. Enter weight
of user using the Speed or Incline arrows. Press ENTER to
confirm weight.
MANUAL MODE: If you elect to operate the Treadmill in
Manual Mode, press START. The Treadmill will start at
0.5mph after a 3,2,1 countdown.
PROGRAM MODE: After pressing POWER, press the desired
program using the program Quick Keys or press SELECT
to choose one of the 18 programs. Note: The program
layout appears in the dot matrix display. Press ENTER to
verify the selection. Press START to begin the program. All
programs have ten, one-minute segments. The program
repeats the ten, one-minute segments until the user
presses STOP. An explanation of the programs follow:
1. Hill Walk: This is an elevation program that goes from
0% to 3% grade. The speed is controlled by the user
and the Treadmill will start at 0.5mph. Each minute,
the elevation changes.
2. Mountain Pass: This is an elevation program that
goes from 0% to 5% grade. The speed is controlled
by the user.
3. Pikes Peak: This is a challenging elevation program
that goes from 0% to 7% grade. The speed is
controlled by the user.
4. Fat Burn: This is an interval elevation program where
the elevation alternates between 0% and 5%. The
user controls the speed.
5. Walking: This is a speed program that varies between
2.5mph and 3.3mph. This is an excellent program for
intermediate walkers. The user controls the elevation.
6. Jogging: This is a speed program that varies the
speed between 4.0mph and 4.8mph. This is a good
program for beginner joggers and very fast walkers.
The user controls the elevation.
7. Cardio Burn: This is an interval elevation program
that alternates between 3% and 8%. The user
controls the speed.
8. Walking Interval: This is an interval speed program
that has alternating rest and work intervals. The
defaults are 2.5mph and 3.0mph. When a lower
interval is changed, all the lower, or rest intervals
go to this value. When the higher, or work interval
is changed, all the work intervals go to this value.
The user controls the incline.
9. Jogging Interval: This is an interval speed program
that has alternating rest and work intervals. The
defaults are 5.0mph and 6.0mph. When a lower
interval is changed, all the rest intervals go to this
value. When the higher, or work interval is changed,
all the work intervals go to this value. The user
controls the incline.
10. Hill Interval: This is an interval elevation program
that has alternating rest and work intervals. The
defaults are 0% and 3%. When a lower interval is
changed, all the rest intervals go to this value.
When the higher, or work interval is changed,
all the work intervals go to this value. The
default speed is 2.0mph. The speed is
controlled by the user.
11. Mountain Interval: This is an interval elevation
program that has alternating rest and work
intervals. The defaults are 1% and 7%. When a
lower interval is changed, all the rest intervals
go to this value. When the higher, or work
interval is changed, all the work intervals go
to this value. The default speed is 2.0mph.
The speed is controlled by the user.
12. Target Distance: This program counts down the
distance goal that the user sets before exercising.
After confirming the program, the user enters the
distance goal using the Speed or Incline arrow
keys. Increments are 0.5 miles. Press ENTER to
confirm the distance goal, press START, the
Treadmill Belt starts and the user controls the
Speed and Incline. The distance will count down
in the Distance window.
13. Target Calories: This program counts down the
calorie goal that the user sets before exercising.
After confirming the program, the user enters the
calorie goal using the Speed or Incline arrow
keys. Increments are 10 calories. Press ENTER to
confirm the calorie goal, press START, the Treadmill
starts and the user controls the Speed and
Incline. The calorie goal will count down in the
Calories window.
14. Target Time: This program counts down the time
goal that the user sets before exercising. After
confirming the program, the user enters the
time goal using the Speed or Incline arrow keys.
Increments are 1 minute. Press ENTER to confirm
the time goal, press START, the Treadmill starts and
the user controls the Speed and Incline. The time
goal will count down in the Time window.
15. Target Elevation Gain: This program counts down
the elevation gain goal that the user sets before
exercising. After confirming the program, the user
enters the elevation gain goal using the Speed or
Incline arrow keys. Increments are 10 feet. Press
ENTER to confirm the elevation gain goal, press
START, the Treadmill starts and the user controls
the Speed and Incline. The elevation gain goal
will count down in the Elevation Gain window.
16. User Programs 1-3: After selecting one of the user
programs, press ENTER to confirm. Press ENTER
again and adjust the Speed and Incline for
segment one and press ENTER. Continue to
adjust the Speed and Incline for each segment
and press ENTER. Press START to begin the
workout. If a Speed or Incline value is changed
during usage, the Computer will store the
value of the Speed and Incline at the end of
each segment and will retain these values.
19
DISPLAY FUNCTION
1600
Please read carefully before using the Treadmill.
INCLINE/PULSE: Displays pulse
rate except when elevation
is changed or SELECT key is
pressed. To get a pulse rate,
place both of your hands
on the Pulse Grip Bars. It is
recommended to straddle
the Walking Belt to get an
accurate reading. If you
are walking or jogging, it is
difficult for the Computer
to accurately read your
pulse rate. (See page 22
for more details.)
TIME: Shows workout Time. Time begins at 00:00 and counts up.
The maximum time is 99:99. When the Safety Key is first attached
to the Computer, this display shows the accumulated Distance
(odometer) for one second.
PACE: Shows minutes per mile.
SPEED: Displays the Speed
the Treadmill Belt is moving.
DISTANCE: Displays the Distance,
in miles or kilometers, the
Treadmill Belt has gone on
the current workout.
DOT MATRIX: The 8 x 10 dot matrix reflects Incline
on the Elevation Programs (Programs 1-4, 7, 10-11)
and Speed on the Speed Programs (Programs 56, 8-9) and the User Programs. On Programs 12-15
and in the Manual Mode, the dot matrix displays
a 1/4 mile running track.
CALORIES: Displays Calories consumed. The Calorie
Calculation is based on a 150 pound person.
CALORIES/HR: During your workout, press Select to
show the Calories you could burn per hour.
ELEVATION GAIN: To display Elevation in feet, the user
has climbed during the current workout, press SELECT
and the value will display for three seconds.
PROGRAM FUNCTION
1600
PROGRAM 8
PROGRAM 4
FAT BURN
MANUAL
PROGRAM 9
PROGRAM 5
PROGRAM 1
WALKING
HILL WALK
PROGRAM 3
CARDIO BURN
MOUNTAIN INTERVAL
Odometer: An Odometer showing accumulated distance
will appear in the Time window for one second when the
Safety Key is placed on the Computer.
Time-Out: If the Treadmill is turned on, and the Belt is not
moving, the Computer will shut-off after five minutes.
18
USER 2
U3
PROGRAM 14
PROGRAM 11
PROGRAM 7
PIKES PEAK
U2
TARGET CALORIES
HILL INTERVAL
JOGGING
MOUNTAIN PASS
USER 1
TARGET DISTANCE
PROGRAM 13
JOGGING INTERVAL
PROGRAM 10
PROGRAM 6
PROGRAM 2
U1
PROGRAM 12
WALKING INTERVAL
TARGET TIME
USER 3
PROGRAM 15
TARGET ELEVATION GAIN
Re-Start: If the Treadmill is stopped during use,
when the START button is pressed again, the
Treadmill will ramp-up the speed to where it
was stopped. If the Treadmill is stopped for 5
minutes or more, POWER is lost and the
Treadmill will have to be re-started.
1600
1800
Electronics
Operating
Instructions
For Your
Treadmill
SAFETY TIPS:
•
•
•
Practice mounting and dismounting your
Treadmill before beginning your workout.
Attach the Safety Key to the Computer (the
Treadmill will not operate without the Safety
Key). Clip the other end of the Safety Key to
your clothing before exercising to ensure the
Treadmill will stop if the user accidentally
walks off the Treadmill.
If the user falls off the Treadmill, the Safety Key
will come off the Computer and the Treadmill
will stop at once to avoid further injury.
•
•
Do not stand on the Walking Belt while starting
the Treadmill. Straddle the Belt and stand on
the plastic Foot Rails.
The Treadmill will start at 0.5mph after a 3,2,1
countdown. If you are a new user, stay at a slow
speed and hold onto the Hand Grips until you
become comfortable.
15
SHOWS TIME
& PACE
SHOWS
SPEED
FAN
Turns fan on/off.
Press once - low
again - medium
again - high
again - off
PROGRAM KEYS
Pressing these selects
a program. Press
Power, then select
Program, hit Enter,
then Start.
Shows speed during
your workout
POWER
Pressing this key
brings power to the
Treadmill and must
be pressed before
any other key.
START/STOP
Pressing this starts
and stops the
Treadmill Belt.
ENTER
Pressing this confirms the
selection of a program.
Also confirms the speed
and incline values during
the setting of a user
program.
SHOWS
PULSE &
INCLINE LEVEL
SELECT
Displays the preset or user programs. Also will
display the elevation and elevation gain
values for three seconds during workout.
When power is off, press for 2 seconds to
change from miles to kilometers.
PROGRAM KEYS
Pressing these selects
a program. Press
Power, then select
Program, hit Enter,
then Start.
Shows time during
your workout
Shows minutes per mile
during your workout
QUICK REFERENCE GUIDE
Shows pulse during
your workout
Tells level of incline when Select
is pushed during your workout
SAFETY KEY
The Computer can be operated
only with the Safety Key attached
to the Treadmill. The Computer
shuts off and the Treadmill stops
when this key is removed.
+ OR - KEYS
Increases or decreases
the INCLINE when
pressed.
INCLINE
QUICK KEYS
1-12%
Pressing these
keys slowly
changes the
Incline to that
value.
16
SPEED
QUICK KEYS
1-11 MPH
Pressing these
keys slowly
changes the
SPEED to that
value.
+ OR - KEYS
Increases or decreases the
SPEED when pressed.
Pressing once increases or
decreases the speed 0.1
mph. Pressing and holding
for two seconds will
increase or decrease the
speed faster.
1600
PROGRAM KEYS
Pressing these selects a program.
Press Power, then select Program,
hit Enter, then Start.
SHOWS TIME
& PACE
SHOWS
SPEED
1800
+ OR - KEYS
Increases or decreases the
SPEED when pressed.
Pressing once increases or
decreases the speed 0.1
mph. Pressing and holding
for two seconds will
increase or decrease the
speed faster.
CAL/HR
During your
workout
pressing
Select will
show the
Calories you
could burn
per hour.
SPEED
QUICK KEYS
1-11 MPH
Pressing these
keys slowly
changes the
SPEED to that
value.
PROGRAM KEYS
Pressing these selects a program.
Press Power, then select Program,
hit Enter, then Start.
FAN
Turns fan on/off.
Press once - low
again - medium
again - high
again - off
Shows
calories
burned
Shows speed during
your workout
POWER
Pressing this key
brings power to the
Treadmill and must
be pressed before
any other key.
START/STOP
Pressing this starts
and stops the
Treadmill Belt.
ENTER
Pressing this confirms the
selection of a program.
Also confirms the speed
and incline values during
the setting of a user
program.
SHOWS
PULSE &
INCLINE LEVEL
SELECT
Displays the preset or user programs.
Also will display the elevation and
elevation gain values for three seconds
during workout. When power is off,
press for 2 seconds to change from
miles to kilometers.
Shows
distance
Shows time during
your workout
Shows minutes per mile
during your workout
QUICK REFERENCE GUIDE
Shows pulse during
your workout
Tells level of incline when Select
is pushed during your workout
SAFETY KEY
The Computer can be operated
only with the Safety Key attached
to the Treadmill. The Computer
shuts off and the Treadmill stops
when this key is removed.
+ OR - KEYS
Increases or decreases
the INCLINE when
pressed.
ELEVATION
GAIN
Shows
elevation
gain during
workout
when Select
is pushed.
INCLINE
QUICK KEYS
1-12%
Pressing these
keys slowly
changes the
Incline to that
value.
17
Download PDF

advertising