User manual | Fluke PM6681R Outdoor Timer User Manual

Hybrid IP-PBX
User Manual
Model
KX-TDA15/KX-TDA30
KX-TDA100/KX-TDA200
Thank you for purchasing the Panasonic Hybrid IP-PBX, KX-TDA15/KX-TDA30/KX-TDA100/KX-TDA200.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDA15/KX-TDA30/KX-TDA100/KX-TDA200: Version 1.1
Feature Highlights
Voice Mail Integration
Call Centre
This PBX can establish Incoming Call Distribution
Groups (ICD Group) by which a large volume of
calls from the external customers could be
received. One extension can act as the supervisor,
and monitor other group members.
ICD
You can forward your calls to a voice
processing system and let calling parties leave
messages in your mailbox when you are unable
to receive calls.
Group 01
Message
Message
ICD
Group 02
Customers
Message
Message
Message
Message
Queuing
1.8 Utilising the Call Centre (Page 109)
1.9.3 If a Voice Processing System is
Connected (Page 119)
Wireless System
PC Phone/PC Console
This PBX optionally supports a Portable Station
(PS) system. PSs can be used on the PBX
with other wired telephones.
This PBX supports the PC Phone/PC Console
when your computer is connected to certain
Panasonic telephones via USB interface. The PC
Phone/PC Console provides advanced control and
monitoring of your PBX.
Computer
Appendix (Page 177)
Consult your dealer
Easy Operation
If you are using a certain Panasonic telephone
that is equipped with a Navigator Key/Jog Dial
and a display, it helps you to access the desired
feature easily. Also, you will be informed of the
arrival of an incoming call or a message waiting
by the lamp if it is equipped.
Jog Dial
User Manual
Date
Time
Message/Ringer Lamp
1.1 Before Operating the Telephones (Page
12)
2
This PBX can record or print out call
information: date, time, extension no., dialled
no., duration, etc.
Ext
01/02/02 10:03AM 1230
01/02/02 11:07AM 2230
ENTER
Navigator Key
Call Record
(Station Message Detail Recording)
Consult your dealer
• • • • • • •
• • • • • • •
• • • • • • •
In This Manual,
•
Proprietary Telephone is abbreviated as "PT".
Single Line Telephone is abbreviated as "SLT".
Portable Station is abbreviated as "PS".
Proprietary Telephone with a Display is abbreviated as "Display PT".
Digital Proprietary Telephone is abbreviated as "DPT".
•
The suffix of each model number is omitted.
•
The illustrations of the PBX are based on the KX-TDA200.
•
The following icons are used frequently.
!!
Hints
Conditions
User Manual
3
Important Information
WARNING
•
•
•
•
•
•
•
THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED
SERVICE PERSONNEL.
WHEN A FAILURE OCCURS WHICH EXPOSES ANY INTERNAL PARTS,
DISCONNECT THE POWER SUPPLY CORD IMMEDIATELY AND RETURN THIS
UNIT TO YOUR DEALER.
DISCONNECT THE TELECOM CONNECTION BEFORE DISCONNECTING THE
POWER CONNECTION PRIOR TO RELOCATING THE EQUIPMENT, AND
RECONNECT THE POWER FIRST.
THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG. FOR SAFETY
REASONS THIS PLUG MUST ONLY BE CONNECTED TO AN EARTHING
CONTACT SOCKET WHICH HAS BEEN INSTALLED ACCORDING TO
REGULATIONS.
THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT DEVICE.
ENSURE THAT THE SOCKET-OUTLET IS LOCATED/INSTALLED NEAR THE
EQUIPMENT AND IS EASILY ACCESSIBLE.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
TO PROTECT THIS UNIT FROM STATIC ELECTRICITY, DO NOT TOUCH ANY
CONNECTORS OF THE UNIT.
Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed to reduce
the risk of fire, electric shock and injury to persons, including the following:
1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or
laundry tub, in a wet basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electric storm. There may be a
remote risk of electric shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a
fire. They may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
4
User Manual
Changed from:
The KX-TDA30E, the KX-TDA30NE, the KX-TDA30GR,
and the KX-TDA30CE are designed to interwork with the:
The KX-TDA15E/KX-TDA30E, the KX-TDA15NE/KX-TDA30NE, the KXTDA15GR/KX-TDA30GR, and the KX-TDA30CE are designed to interwork with
the:
• Analogue Public Switched Telephone Network (PSTN) of a European country
• Pan-European Integrated Services Digital Network (ISDN) using ISDN basic
rate access
The KX-TDA100E/KX-TDA200E, the KX-TDA100NE/KX-TDA200NE, the KXTDA100GR/KX-TDA200GR, and the KX-TDA100CE/KX-TDA200CE are
designed to interwork with the:
• Analogue Public Switched Telephone Network (PSTN) of a European country
• Pan-European Integrated Services Digital Network (ISDN) using ISDN basic
rate access
• Pan-European Integrated Services Digital Network (ISDN) using ISDN primary
rate access
• ONP 2048 kbit/s digital structured leased lines (D2048S)
We, Panasonic Communications Co., Ltd./Panasonic Communications Company (U.K.) Ltd.,
declare that this equipment is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
If you would like to receive a copy of the original Declaration of Conformity of our products
which relates to the R&TTE, please visit our web address:
http://doc.panasonic.de
User Manual
5
Attention
•
•
•
•
•
•
If there is any trouble, disconnect the unit from the telephone line. Plug the telephone directly into
the telephone line. If the telephone operates properly, do not reconnect the unit to the line until
the problem has been repaired by a certified Panasonic dealer. If the telephone does not operate
properly, chances are that the problem is in the telephone system, and not in the unit.
Keep the unit away from heating appliances and electrical noise generating devices such as
fluorescent lamps, motors and televisions. These noise sources can interfere with the
performance of the unit.
This unit should be kept free of dust, moisture, high temperature (more than 40 °C) and vibration,
and should not be exposed to direct sunlight.
Never attempt to insert wires, pins, etc., into the vents or holes of this unit.
Do not use benzene, thinner, or the like, or any abrasive powder to clean the cabinet. Wipe it with
a soft cloth.
Do not use any handset other than a Panasonic handset for KX-TDA15/KX-TDA30/KX-TDA100/
KX-TDA200 use.
The serial number of this product may be found on the label affixed to the side of the
unit. You should note the model number and the serial number of this unit in the
space provided and retain this manual as a permanent record of your purchase to
aid in identification in the event of theft.
MODEL NO.:
SERIAL NO.:
For your future reference
DATE OF PURCHASE
NAME OF DEALER
DEALER'S ADDRESS
DEALER'S TELEPHONE NO.
6
User Manual
Table of Contents
1
Operation ....................................................................................... 11
1.1
1.1.1
1.2
1.2.1
1.2.2
1.2.3
1.2.4
1.2.5
1.2.6
1.2.7
1.2.8
1.2.9
1.3
1.3.1
1.3.2
1.3.3
1.3.4
1.3.5
1.3.6
1.4
1.4.1
1.4.2
1.4.3
1.4.4
1.4.5
1.4.6
1.4.7
1.4.8
1.5
1.5.1
1.5.2
1.5.3
1.6
1.6.1
1.6.2
1.6.3
1.7
1.7.1
1.7.2
1.7.3
1.7.4
1.7.5
Before Operating the Telephones ........................................................................12
Before Operating the Telephones ............................................................................12
Making Calls ...........................................................................................................23
Basic Calling ............................................................................................................23
Easy Dialling ............................................................................................................27
Redial.......................................................................................................................30
When the Dialled Line is Busy or There is No Answer.............................................31
Accessing the ISDN Service (ISDN Service Access) ..............................................39
Alternating the Calling Method (Alternate Calling—Ring/Voice) ..............................40
Calling without Restrictions......................................................................................41
To Access Another Party Directly from Outside (Direct Inward System Access [DISA]) 42
Setting Your Telephone from Another Extension or through DISA (Remote Setting) .....45
Receiving Calls ......................................................................................................46
Answering Calls .......................................................................................................46
Answering Hands-free (Hands-free Answerback) ....................................................47
Answering a Call Ringing at Another Telephone (Call Pickup) ................................48
Answering a Call via an External Speaker (Trunk Answer From Any Station [TAFAS]) ..49
Using the ANSWER/RELEASE Button ....................................................................50
Identifying Malicious Calling Parties (Malicious Call Identification [MCID]) .............52
During a Conversation...........................................................................................53
Transferring a Call (Call Transfer) ............................................................................53
Holding a Call...........................................................................................................57
Talking to Two Parties Alternately (Call Splitting).....................................................61
Answering Call Waiting ............................................................................................63
Multiple Party Conversation .....................................................................................67
Mute .........................................................................................................................75
Letting Other People Listen to the Conversation (Off-hook Monitor) .......................76
Using the Headset (Headset Operation)..................................................................77
Before Leaving Your Desk.....................................................................................79
Forwarding Calls ......................................................................................................79
Showing a Message on the Caller’s Telephone Display (Absent Message) ............85
Preventing Other People from Using Your Telephone (Extension Lock) ..................87
Making/Answering an Announcement .................................................................88
Paging ......................................................................................................................88
Answering/Denying a Paging Announcement ..........................................................90
Making an Announcement and Having a Multiple Party Conversation
(Broadcasting)(KX-TDA30/KX-TDA100/KX-TDA200 only) ......................................91
Setting the Telephone According to Your Needs ................................................94
Setting the Alarm (Timed Reminder) .......................................................................94
Refusing Incoming Calls (Do Not Disturb [DND]) ....................................................96
Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper
OHCA) .....................................................................................................................98
Displaying Your Telephone Number on the Called Party and Caller’s Telephone
(Calling/Connected Line Identification Presentation [CLIP/COLP]) .........................99
Preventing Your Telephone Number Being Displayed on the Caller’s Telephone
(Connected Line Identification Restriction [COLR]) ...............................................100
User Manual
7
1.7.6
1.7.7
1.7.8
1.7.9
1.7.10
1.7.11
1.7.12
1.7.13
1.8
1.8.1
1.8.2
1.8.3
1.9
1.9.1
1.9.2
1.9.3
1.10
1.10.1
1.11
1.11.1
1.11.2
1.11.3
2
Manager Operation...................................................................... 139
2.1
2.1.1
2.1.2
2.1.3
2.1.4
2.1.5
3
Customising Your Phone (Personal Programming) ......................................... 150
Customising Your Phone (Personal Programming) ............................................... 150
Settings on the Programming Mode...................................................................... 152
Customising the Buttons ....................................................................................... 162
Manager Programming ....................................................................................... 166
Programming Information...................................................................................... 166
Manager Programming.......................................................................................... 167
Customising Your System (System Programming) ......................................... 169
Programming Information...................................................................................... 169
System Programming............................................................................................ 172
Appendix ...................................................................................... 177
4.1
4.1.1
4.2
4.2.1
8
Control Features.................................................................................................. 140
Extension Control .................................................................................................. 140
Time Service Mode Control................................................................................... 141
Restriction Level Control (Dial Tone Transfer) ....................................................... 143
Turning on the External Background Music (BGM) ............................................... 144
Recording Outgoing Messages (OGM) ................................................................. 145
Customising Your Phone & System .......................................... 149
3.1
3.1.1
3.1.2
3.1.3
3.2
3.2.1
3.2.2
3.3
3.3.1
3.3.2
4
Preventing Your Number Being Displayed on the Called Party’s Telephone (Calling
Line Identification Restriction [CLIR]) .................................................................... 101
Preventing Other People from Joining Your Conversation (Executive Busy Override
Deny)..................................................................................................................... 102
Turning on the Background Music (BGM) ............................................................. 103
Protecting Your Line against Notification Tones (Data Line Security) ................... 104
Checking the Time Service Status ........................................................................ 105
Setting the Parallelled Telephone to Ring (Parallelled Telephone) ........................ 106
Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode) 107
Clearing Features Set at Your Extension (Extension Feature Clear) .................... 108
Utilising the Call Centre...................................................................................... 109
Leaving an Incoming Call Distribution Group (Log-in/Log-out, Wrap-up).............. 109
Monitoring and Controlling the Call Status of an Incoming Call Distribution Group
(Incoming Call Distribution Group Monitor) ........................................................... 112
Forwarding a Waiting Call (Manual Queue Redirection) ....................................... 115
Using User-supplied Equipment........................................................................ 116
If a Doorphone/Door Opener is Connected........................................................... 116
If a Host PBX is Connected................................................................................... 118
If a Voice Processing System is Connected.......................................................... 119
After Moving to a New Location in the Office ................................................... 125
Using the Same Settings as Your Previous Extension (Walking Extension) ......... 125
Using a Display Proprietary Telephone............................................................. 126
Using the Call Log ................................................................................................. 126
Using the Directories ............................................................................................. 130
Accessing System Features (System Feature Access)......................................... 137
Troubleshooting .................................................................................................. 178
Troubleshooting ..................................................................................................... 178
Feature Number Table......................................................................................... 181
Feature Number Table........................................................................................... 181
User Manual
4.3
4.3.1
4.4
4.4.1
4.4.2
What is This Tone? ..............................................................................................190
What is This Tone? ................................................................................................190
Revision History...................................................................................................194
KX-TDA100/KX-TDA200 Version 1.1 .....................................................................194
KX-TDA30 Version 1.1 ...........................................................................................195
Index .................................................................................................. 197
User Manual
9
10
User Manual
Section
1
Operation
This chapter shows you step by step how to use each
feature. Read this chapter to become familiar with the
many useful features of this PBX.
User Manual
11
1.1 Before Operating the Telephones
1.1
Before Operating the Telephones
1.1.1
Before Operating the Telephones
What Kind of Telephone Can Be Used?
You can use a single line telephone (SLT), such as a rotary pulse telephone or a Panasonic
proprietary telephone (PT) such as the KX-T7636. You can also use a Panasonic Portable Station
(PS) such as the KX-TD7590 or KX-TD7690. Use the feature depending on the telephone you are
REDIAL
using. If you are using a Panasonic proprietary telephone with a special feature button such as
or a display (Display PT) or both, you can follow the operation with the button or display messages
for easy programming.
If you use a large display telephone (e.g., KX-T7636), you can follow the displayed messages to use
the features. If your telephone does not have feature buttons and/or a display, you may operate the
PBX by entering a feature number instead. Follow the operation for your type of telephone.
If you use a Console, you can use the buttons on the Console as the buttons on the connected
proprietary telephone.
•
If you use a Panasonic proprietary
telephone which does not have
feature buttons, you may change one
of the unused flexible buttons to a
feature button. Refer to "3.1.3
Customising the Buttons".
Registration for Your Portable Station (PS)
You must register your PS in the PBX and determine its extension number before initial use. For PS
registration, consult your dealer.
Feature Numbers
To use certain features, you need to enter specified feature numbers (and an additional parameter, if
required).
There are two types of feature numbers as follows:
•
Flexible feature number
•
Fixed feature number
Fixed feature numbers cannot be changed. However, you can change the flexible numbers to other
numbers for easier use. If you want to change the numbers, consult your dealer. In this manual, the
default numbers (factory installed) are used for operations.
A flexible number is shown as
(half-shaded key). Use the new programmed number if you have
changed the feature number. Write the new number in the "Feature Number Table" (Appendix).
Notice
The default value of a flexible feature number may vary depending on country/area. For more
details, consult your dealer.
12
User Manual
1.1 Before Operating the Telephones
If you use a single line telephone which does not have the " " or "#" keys;
it is not possible to access features that have " " or "#" in their feature numbers.
Tone
You will hear various tones, during or after an operation, for confirmation. Refer to "4.3.1 What is This
Tone?" (Appendix).
Display
In this manual, you will see "the display ...". This refers to the display of a Panasonic proprietary
telephone. If your telephone is not a Panasonic display proprietary telephone, the message will not
be displayed.
If you use a Panasonic display proprietary telephone, the display helps you confirm the settings.
Some proprietary telephones also give you easy access to features. A message is displayed
depending on the feature. By pressing the corresponding button on the side or at the bottom of the
display, or pressing the Navigator Key, you can access the desired feature.
Furthermore, depending on the display proprietary telephone, you can operate features or make calls
using the display message. Refer to "1.11 Using a Display Proprietary Telephone".
Notice
In this manual, the display messages are described in English.
Your Extension Number
If you use a Panasonic display proprietary telephone, you can check your own extension number on
the display. Press the TRANSFER button or Soft (S1) button while on-hook.
Using a Navigator Key/Jog Dial/Volume Key
The Navigator Key can be used for the display contrast and the volume control or you can search for
desired items on the display. Press the Navigator Key/Volume Key or rotate the Jog Dial in the desired
direction. The contrast or the volume level and the items will change as follows:
Navigator Key
Jog Dial
Volume Key
Up
Up
(Level increases)
Left
ENTER
Left
(anti-clockwise)
Right
(clockwise)
Level decreases
Level increases
(Level increases)
Right
Down
Down
(Level decreases)
(Level decreases)
User Manual
13
1.1 Before Operating the Telephones
Examples
The displays and the illustrations shown as examples are from a telephone connected to the KXTDA200.
Restrictions
Some features may be restricted at your extension under the system programming. Consult your
manager or dealer.
Icon Descriptions
The following icons show you the feature availability, notes and action to use the features.
This feature cannot be used with a
single line telephone.
See "Programming" for Related
Programming if necessary.
desired no.
Seize an outside line (One of the
following).
OR
•
Press the CO button.
0 / 9
•
Dial automatic line access
OR
number 0 or 9.
outside line
8 group no.
•
Dial outside line group access
number and outside line
group number.
(CO)
Off-hook (One of the following).
•
Lift the handset.
•
Press the SP-PHONE button.
•
Press the MONITOR button.
(To start talking, lift the
handset.)
•
Press TALK button.
Press the Call button on the
Doorphone.
On-hook (One of the following).
•
Hang up.
•
Press the SP-PHONE button.
•
Press the MONITOR button.
•
Press CANCEL button.
Press the hookswitch lightly.
Press the corresponding feature
button on the proprietary
telephone.
Talk.
Enter the required number.
<Example>
You will hear a busy, confirmation,
dial, ring or ringback tone.
B. Tone: Busy Tone
C. Tone: Confirmation Tone
D. Tone: Dial Tone
R. Tone: Ring Tone
R. B. Tone: Ringback Tone
account code
Enter the account code.
extension no.
phone no.
14
User Manual
Dial an extension number.
Dial the telephone number.
outside
phone no.
Dial outside phone number.
1.1 Before Operating the Telephones
When You Use a Panasonic Proprietary Telephone
If you use a Panasonic proprietary telephone and the Console, they may have some of the useful
feature buttons described below. For a PS user, refer to "Operating Instructions" for PS. These
buttons make operations simple. The illustrations may differ from the buttons on your telephone.
Fixed Buttons
(CO)
AUTO DIAL
STORE
REDIAL
CO:
Used to make or receive an outside
call. (Button assignment is required.)
Also used as feature buttons. (Button
assignment is required.)
(Only the outside line "number" [e.g., 1,
2] may be shown on some telephones.)
AUTO DIAL/STORE:
Used for System/Personal Speed
Dialling or storing programme
changes.
REDIAL:
Used to redial the last dialled number.
SP-PHONE
PAUSE
MESSAGE
SP-PHONE:
Used for hands-free operation.
PAUSE:
Used to insert a pause when storing a
telephone number. This button also
functions as the PROGRAM button
when there is no PROGRAM button on
your telephone.
MESSAGE:
Used to leave a message waiting
indication or call back the party who left
the message waiting indication.
User Manual
15
1.1 Before Operating the Telephones
INTERCOM
INTERCOM:
Used to make or receive intercom
calls.
Soft Buttons:
Used to select the item displayed on
the bottom of the display.
INT’
MONITOR
TRANSFER
16
MONITOR:
Used for hands-free dialling. You can
monitor the party’s voice in hands-free
mode.
TRANSFER:
Used to transfer a call to another party.
User Manual
AUTO ANS
MUTE
HOLD
AUTO ANS (Auto Answer)/MUTE:
Used to receive an incoming call in
hands-free mode or mute the
microphone during a conversation.
HOLD:
Used to place a call on hold.
1.1 Before Operating the Telephones
FLASH/
RECALL
VOICE CALL
MUTE
PROGRAM
FLASH/RECALL:
Used to disconnect the current call and
make another call without hanging up.
This button also functions as a
CANCEL button while on-hook.
VOICE CALL/MUTE:
Used to monitor an intercom call
automatically, but it cannot be used for
hands-free conversations. It also
mutes the handset microphone during
a conversation.
PROGRAM:
Used to enter and exit the
Programming mode.
CONF
FWD/DND
ANSWER
CONF (Conference):
Used to establish a multiple party
conversation.
Call Forwarding (FWD)/Do Not
Disturb (DND):
Used to perform Call Forwarding
(FWD) or Do Not Disturb (DND).
ANSWER:
Used to answer an incoming call.
PROG.
User Manual
17
1.1 Before Operating the Telephones
RELEASE
RELEASE:
Used to disconnect the line.
Navigator Key/Jog Dial/Volume Key:
Used to adjust the volume and the
display contrast or select desired
items.
VOL
Programmable Feature (PF):
Located on the upper part of the CO
button array or on the DSS Console.
Assigns the desired button and used to
access the stored feature. Mostly used
as a One-touch Dialling button. (Only
the "F and number" may be shown on
some telephones.)
(PF)
SELECT
SELECT:
Used to select the displayed item or to
call the displayed phone number.
ENTER:
Used to confirm the selected item.
MODE
MODE:
Used to shift the display to access
various features.
SHIFT
SHIFT:
Used to access the second level of Soft
button features.
CANCEL:
Used to cancel the selected item.
Customised Buttons
If the term is in parentheses like (Account) in this section, it means a flexible button has been made
into an "Account" button. To customise, refer to "3.1.3 Customising the Buttons".
Buttons
Feature
Loop-CO (L-CO)
Used to access an idle outside line for making outside calls.
Incoming outside calls from any outside line arrive at this button.
Group-CO (G-CO)
Used to access an idle outside line in a specified outside line group for
making outside calls.
Incoming calls from outside lines in the assigned outside line group arrive
at this button.
18
User Manual
1.1 Before Operating the Telephones
Buttons
Feature
Single-CO (S-CO)
Used to access a specified outside line for making or receiving outside
calls.
Direct Station Selection (DSS)
Used to access an extension with one-touch.
It is also possible to be changed to the other feature button.
One-touch Dialling
Used to access a desired party or system feature with one-touch.
Incoming Call Distribution
Group (ICD Group)
Used to access a specified incoming call distribution group for making or
receiving calls.
Message
Used to leave a message waiting indication or call back the party who left
the message waiting indication.
Message for another extension Used to have a Message button for another extension.
Call Forwarding (FWD)/Do Not
Used to forward all calls to a specified destination or refuse.
Disturb (DND)—Both calls
FWD/DND—Outside calls
Used to forward outside calls to a specified destination or refuse.
FWD/DND—Intercom calls
Used to forward intercom calls to a specified destination or refuse.
Group FWD—Both calls
Used to forward all the calls to your group to a specified destination.
Group FWD—Outside calls
Used to forward the outside calls to your group to a specified destination.
Group FWD—Intercom calls
Used to forward the intercom calls to your group to a specified
destination.
Account
Used to enter an account code.
Conference
Used to establish a multiple party conversation.
Terminate
Used to disconnect the current call and make another call without
hanging up.
External Feature Access (EFA)
Used to access special features offered by a host PBX or a telephone
company.
Charge Reference
Used to check the total call charge for your own extension.
Call Park
Used to park or retrieve a call in a preset parking zone.
Call Park (Automatic Park
Zone)
Used to park a call in an idle parking zone automatically.
Call Log
Used to show the incoming call information.
Call Log for ICD Group
Used to have a Call Log button for incoming call distribution group.
Log-in/Log-out
Used to switch between the log-in and log-out mode.
Log-in/Log-out of a specified
group
Used to have a Log-in/Log-out button for another incoming call
distribution group.
Log-in/Log-out for all groups
Used to have a Log-in/Log-out button for all groups.
Hurry-up
Used to transfer the longest waiting call in the queue of an incoming call
distribution group to the overflow destination.
Wrap-up
Used to switch the wrap-up status, Ready and Not Ready mode.
System Alarm
Used to confirm a PBX error. For more details, consult your dealer.
User Manual
19
1.1 Before Operating the Telephones
Buttons
Feature
Time Service (Day/Night/
Lunch/Break)
Used to switch the time service mode.
Answer
Used to answer an incoming call.
Release
Used to disconnect the line during or after a conversation or to complete
a Call Transfer.
Toll Restriction/Call Barring
Used to change the toll restriction/call barring level of other extension
users temporarily.
ISDN Service
Used to access an ISDN service.
Calling Line Identification
Restriction (CLIR)
Used to switch between the CLIP and CLIR services.
Connected Line Identification
Restriction (COLR)
Used to switch between the COLP and COLR services.
ISDN-Hold
Used to transfer a call using telephone company.
Headset
Used to talk using the headset.
Time Service Switching Mode
Used to switch the time service mode, Automatic or Manual.
(Automatic/Manual)
Two-way Record
Used to record a conversation into your own mailbox.
Two-way Transfer
Used to record a conversation into the mailbox of a specific extension.
One-touch Two-way Transfer
Used to record a conversation into the mailbox of a specific extension
with one-touch.
Live Call Screening (LCS)
Used to monitor your own voice mailbox while an incoming caller is
leaving a message and, if desired, intercept the call.
Voice Mail Transfer
Used to transfer a call to the mailbox of a specified extension.
20
User Manual
1.1 Before Operating the Telephones
How to Follow the Steps
An example of system operation is shown below.
Calling Another Extension
Feature title
To another extension (Intercom Call)
PT and SLT
PT/SLT/PS
extension no.
OR
(DSS)
Off-hook.
Dial extension number
or press DSS.
Talk.
The DSS button light shows the current status as follows:
Off: The extension is idle.
Red on: Your or another extension is using the line.
To call using a directory, refer to "1.11.2 Using the Directories".
Operation steps
The description of the
icons are explained on
"Icon Descriptions".
Conditions
Hints
For quick operation
If you are an operator or dial some extensions frequently, DSS buttons are useful.
Customising Your Phone
3.1.3 Customising the Buttons
Create or edit a Direct Station Selection (DSS) button.
Programming References: The related or required programming is noted.
User Manual
21
1.1 Before Operating the Telephones
Connection Example
This diagram shows you a connection example.
Private IP
Network
Telephone Company
Computer
Hybrid IP-PBX
KX-TDA15/
KX-TDA30
KX-TDA100
Router
KX-TDA200
Computer
Batteries
(KX-TDA30/KX-TDA100/
KX-TDA200 only)
Computer
(Server)
Computer
Printer
Single Line
Telephone
Fax Machine
Wireless Phone
Doorphone & Door Opener
Single Line
Telephone
Computer
Digital Proprietary Computer
Telephone
Analogue DSS Console
Proprietary
Telephone
ISDN Telephone
DSS Console
Digital
Proprietary
Telephone
External Music Source
Portable Cell
Station Station
Pager/ Amplifier
Speaker
USB
KX-T7636/
KX-T7633
Computer
Voice Processing
System
KX-T7600 Digital
Proprietary
Telephone
22
User Manual
KX-T7600 Digital
Proprietary
Telephone
1.2 Making Calls
1.2
Making Calls
1.2.1
Basic Calling
—
—
—
—
Calling Another Extension
Calling an Outside Party
Making a Call to a Private Network (TIE Line Access)
Using an Account Code (Account Code Entry)
Calling Another Extension
To another extension (Intercom Call)
PT
and SLT
PT/SLT/PS
extension no.
OR
(DSS)
Off-hook.
Dial extension number
or press DSS.
Talk.
•
The DSS button light shows the current status as follows:
Off: The extension is idle.
Red on: Your or another extension is using the line.
•
•
To call using a directory, refer to "1.11.2 Using the Directories".
For quick operation
If you are an operator or dial some extensions frequently, DSS buttons are useful.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Direct Station Selection (DSS) button.
User Manual
23
1.2 Making Calls
To an operator (Operator Call)
You can call an extension or a group assigned as the operator.
PT/SLT/PS
9
OR
0
Off-hook.
•
Enter 9 or 0.
The operator call number (default) varies depending on country/area.
For more details, consult your dealer.
Calling an Outside Party
You have to seize an outside line before dialling an outside phone number because external calls are
made via your PBX.
Select one of the following methods:
To select an idle outside line automatically (Automatic Line Access)
PT/SLT/PS
(L-CO)
OR
0
Off-hook.
•
/ 9
Press L-CO or
enter automatic
line access number.
outside
phone no.
Dial outside phone
number.
Talk.
The automatic line access number (default) varies depending on country/area.
For more details, consult your dealer.
To select an idle outside line in the specified outside line group automatically (Outside
Line Group Access)
PT and SLT
PT/SLT/PS
(G-CO)
OR
8
Off-hook.
24
User Manual
outside line
group no.
Press G-CO or enter outside
line group access number
and then outside line group
number (2 digits).
outside
phone no.
Dial outside phone
number.
Talk.
1.2 Making Calls
To select the specified outside line
PTPT/PS
and
(S-CO)
Off-hook.
•
•
•
•
•
Press S-CO.
outside
phone no.
Dial outside phone
number.
Talk.
Each of the S-CO button or G-CO button light shows the current status as follows:
Off: The line is idle.
Red on: The line is in use.
You may be restricted from making a call to the specified outside party. To make a call,
refer to "1.2.7 Calling without Restrictions".
To confirm number before dialling, you can enter a phone number and confirm it on the
display and then go off-hook. (Predialling)
Call Charge Reference
You can confirm your total call charges by pressing the Charge Reference button.
To make a call to another party without going on-hook, press the FLASH/RECALL
button. It will re-access the outside line and provide external dial tone. Pressing the
Terminate button will provide intercom dial tone. You can dial the new phone number
without going on/off-hook.
Customising Your Phone
•
3.1.2 Settings on the Programming Mode–Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
•
3.1.3 Customising the Buttons
Create or edit a Loop-CO (L-CO) button, a Group-CO (G-CO) button, a Single-CO (SCO) button, a Terminate button or a Charge Reference button.
Making a Call to a Private Network (TIE Line Access)
When your PBX is connected to a private network, you can access it.
To call
PT/SLT/PS
Off-hook.
7
private phone no.
Enter 7.
Dial private phone
number.
Talk.
User Manual
25
1.2 Making Calls
Using an Account Code (Account Code Entry)
You may give a specified account code to extension users and check their telephone usage. You can
specify an account code for each client and check the call duration.
PT/SLT/PS
(Account)
account code
OR
4
Press Account or
enter 49.
Off-hook.
D.Tone
9
Enter account code
(max. 10 digits).
Enter #.
outside
phone no.
Dial outside
phone number.
Seize outside line before
entering outside phone number.
•
•
A Panasonic proprietary telephone extension user can enter an account code during
a conversation and when hearing reorder tone after the other party hangs up.
Account codes may use the digits "0" through "9".
•
If you enter the wrong code, press the " " key and re-enter the account code.
•
You may not be able to make an outside call without an account code. Entry mode is
assigned to each user. Ask your manager for your mode.
For your convenience, you can store the code with the phone number in the memory
(e.g., Speed Dialling).
•
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit an Account button.
26
User Manual
1.2 Making Calls
1.2.2
Easy Dialling
This is convenient for frequently dialled phone numbers.
—
—
—
—
—
With a One Touch Button (One-touch Dialling)
Using Numbers Stored at Your Extension (Personal Speed Dialling)
Using Numbers Stored in the PBX (System Speed Dialling)
To a Preset Number by Going Off-hook (Hot Line)
Using a Preprogrammed Number (Quick Dialling)
With a One Touch Button (One-touch Dialling)
You can store a phone number into the flexible button for one-touch operation.
PT/PS
(One-touch
Dialling)
Press One-touch
Dialling.
Off-hook.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a One-touch Dialling button, store the desired phone number or feature
number.
Using Numbers Stored at Your Extension (Personal Speed
Dialling)
You can store numbers at your extension for your personal use. (Default: 10 numbers, 00-09)
This feature is also known as Station Speed Dialling.
To store a phone number
PT/SLT
3
Off-hook.
Enter
0
30.
personal speed
dialling no.
desired
phone no.
Enter personal speed
dialling number
(2 digits).
Enter desired
phone number
(max. 32 digits).
C.Tone
On-hook.
Enter #.
Enter outside line access number
before outside phone number.
User Manual
27
1.2 Making Calls
To dial
PT/SLT
AUTO DIAL
personal speed
dialling no.
STORE
OR
Off-hook.
•
Press AUTO DIAL
or enter
.
Enter
.
Dial personal speed
dialling number (2 digits).
To call using a directory, refer to "1.11.2 Using the Directories".
Using Numbers Stored in the PBX (System Speed Dialling)
You can make calls using speed dialling numbers stored in the PBX.
PT/SLT/PS
AUTO DIAL
system speed
dialling no.
STORE
OR
Off-hook.
•
Press AUTO DIAL
or enter
.
Dial system speed
dialling number (3 digits).
To call using a directory, refer to "1.11.2 Using the Directories".
To a Preset Number by Going Off-hook (Hot Line)
You can make an outside call simply by going off-hook if you have preprogrammed your phone.
This feature is also known as Pickup Dialling.
To store a phone number
PT/SLT/PS
7
Off-hook.
Enter
4
740.
0
2
Enter 2.
desired
phone no.
Enter desired
phone number
(max. 32 digits).
C.Tone
Enter #.
Enter outside line access number
before outside phone number.
28
User Manual
On-hook.
1.2 Making Calls
To set/cancel
PT/SLT/PS
1
7
Off-hook.
Enter
4
0
740.
Set
OR
0
Cancel
C.Tone
Enter 1 to set
or 0 to cancel.
On-hook.
To dial
PT/SLT/PS
Off-hook.
•
•
•
To call another party, dial the desired party’s phone number before the preprogrammed
number is dialled.
You should assign the intercom line as the seized line when going off-hook. (Preferred Line
Assignment—Outgoing)
If cancelling Hot Line is difficult because this feature is activated immediately after going
off-hook, consult your dealer.
Customising Your Phone
•
3.1.2 Settings on the Programming Mode—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
Using a Preprogrammed Number (Quick Dialling)
You can make a call simply by pressing the preprogrammed number for quick dialling. For details,
consult your manager or dealer.
PT and SLT
PT/SLT/PS
quick dialling no.
Off-hook.
•
Dial quick dialling
number (max. 4 digits).
It is a useful feature for Hotel.
For example, to dial the Room Service, dial the digit "3", not the full extension number.
User Manual
29
1.2 Making Calls
1.2.3
Redial
This is convenient when calling the same outside party again.
— Redialling the Last Number You Dialled (Last Number Redial)
Redialling the Last Number You Dialled (Last Number Redial)
PT/SLT/PS
REDIAL
OR
Off-hook.
30
Press REDIAL or enter #.
•
•
Up to 32 digits can be stored and redialled.
After pressing REDIAL, if you hear a busy tone again, press REDIAL to retry.
•
Automatic Redial
To redial automatically, press the SP-PHONE button and then the REDIAL button, or
press the REDIAL button directly. It will keep trying the busy number until the called party
answers or until a specified timeout.
You can perform other tasks during dialling. To cancel, press the FLASH button.
Some outside lines may not support this feature.
This feature is not available for the KX-T7665 and PS.
User Manual
1.2 Making Calls
1.2.4
When the Dialled Line is Busy or There is No Answer
—
—
—
—
Reserving a Busy Line (Automatic Callback Busy)
Setting Callback on an ISDN Line (Completion of Calls to Busy Subscriber [CCBS])
Sending a Call Waiting Tone (Call Waiting)
Leaving a Message Waiting Indication/Calling Back the Caller Who Left an Indication
(Message Waiting)
— Joining an Existing Call (Executive Busy Override)
— Monitoring Another Extension (Call Monitor)
— To an Extension Refusing the Call (DND Override)
Reserving a Busy Line (Automatic Callback Busy)
You can set the telephone to receive callback ringing:
•
when a dialled extension becomes idle.
•
when your desired outside line that is in use by another extension becomes idle.
You cannot set Automatic Callback Busy for a busy party outside of the PBX.
When you answer the callback ringing:
•
For an outside call: The line is seized.
•
For an intercom call: The called extension starts ringing automatically.
To set (for both extension and outside line)
PT/SLT/PS
While hearing a busy tone
6
C.Tone
Enter 6.
On-hook.
To answer the callback ringing from an idle extension
PT/SLT/PS
While hearing a callback ringing
R.B.Tone
Off-hook.
Talk.
User Manual
31
1.2 Making Calls
To answer the callback ringing from an idle outside line
PT/SLT/PS
While hearing a callback ringing
outside
phone no.
Off-hook.
•
Talk.
Dial outside phone
number.
If you do not answer the callback ringing within 10 seconds, this feature will be cancelled.
To cancel callback ringing (Automatic Callback Busy Cancel)
PT/SLT/PS
4
Enter
Off-hook.
6
46.
C.Tone
On-hook.
Setting Callback on an ISDN Line (Completion of Calls to Busy
Subscriber [CCBS])
You can set the telephone to receive callback ringing when a busy called party on an ISDN line
becomes free.
When you answer the callback ringing, the called party’s telephone number is automatically dialled.
PT/SLT/PS
While hearing a busy tone
6
Enter 6.
32
User Manual
C.Tone
On-hook.
1.2 Making Calls
To answer while hearing a callback ringing
PT/SLT/PS
Off-hook.
To cancel (CCBS Cancel)
PT/SLT/PS
4
Off-hook.
•
•
Enter
6
46.
C.Tone
On-hook.
If you do not answer within a specified time period, this feature will be cancelled.
Availability of this feature depends on the ISDN service offered by your telephone
company.
Sending a Call Waiting Tone (Call Waiting)
You can inform the called party that your call is waiting.
This feature is also known as Busy Station Signalling (BSS).
PT/SLT/PS
While hearing a busy tone
1
Enter 1.
•
Depending on the other party’s telephone, the "Off-hook Call Announcement (OHCA)"
and the "Whisper OHCA" features can be used. You can talk to the other party through the
speaker and the microphone (OHCA) or you only send a call announcement through the
handset (Whisper OHCA), if they are having another conversation using the handset.
Refer to "1.7.3 Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/
Whisper OHCA)".
User Manual
33
1.2 Making Calls
Leaving a Message Waiting Indication/Calling Back the Caller
Who Left an Indication (Message Waiting)
For a caller
When the called extension is busy or does not answer
your call, you can leave a notification so that the called
party may call you back.
For a called extension
As a message receiver, the Message button light or
Message/Ringer Lamp lets you know that a call has been
received. If you receive notification, you can call the caller
back by a simple operation.
For a caller
To leave a message waiting indication
PT/SLT/PS
When the called extension is busy or does not answer
MESSAGE
OR
4
C.Tone
On-hook.
Press MESSAGE
or enter 4.
To leave/cancel a message waiting indication
PT/SLT/PS
PT and SLT
1
7
0
0
Off-hook.
34
User Manual
Enter
70.
Leave
OR
Cancel
Enter 1 to leave
or 0 to cancel.
desired
extension no.
Enter desired
extension number.
C.Tone
On-hook.
1.2 Making Calls
For a called extension
To check the left message and call back
PT/PS
While on-hook
MESSAGE
Off-hook.
Press MESSAGE
until the desired
extension appears.
Talk.
To call back
PT/SLT/PS
MESSAGE
OR
7
Off-hook.
2
0
Press MESSAGE or enter
Talk.
70 and then 2.
To clear message waiting indications left on your extension
PT/SLT/PS
7
Off-hook.
Enter
0
70.
0
Enter 0.
your
extension no.
Dial your
extension number.
C.Tone
On-hook.
User Manual
35
1.2 Making Calls
•
•
•
•
•
•
The Message button light or Message/Ringer Lamp shows the current status as follows:
Off: No message
Red on: You have a message.
The display shows the messages starting with the most recent call.
At a called extension, the MESSAGE button allows you to clear message waiting
indications if you do not want to call the callers back. To clear, press the MESSAGE button
and then press the soft button.
On your PT, you can establish one or more "Message for another extension" buttons.
These buttons can accept the message waiting notification of other extensions or various
incoming call distribution groups.
In other words, you can monitor the message waiting notifications of other telephones.
A single line telephone extension user will receive a special dial tone as message waiting
notification when going off-hook.
KX-TDA100/KX-TDA200 only
The message waiting lamp of a single line telephone can also let you know that you have
a message in the same way as the Message button.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Message button or Message for another extension button.
36
User Manual
1.2 Making Calls
Joining an Existing Call (Executive Busy Override)
The preprogrammed extension can call someone who is busy on the telephone and establish a threeparty conversation.
To join
PT/PS
Outside call
(CO)
Off-hook.
B.Tone
Press
corresponding CO.
3
C.Tone
Enter 3.
Talk.
PT/SLT/PS
Intercom call
While hearing a busy tone
3
C.Tone
Enter 3.
Talk.
For the joined extension
To talk to each party alternately
PT/PS
During a conversation
To continue
TRANSFER
Press TRANSFER.
•
Talk to the
other party.
You can also deny others the possibility of joining your conversation (Default: Allow). Refer
to "1.7 Setting the Telephone According to Your Needs".
User Manual
37
1.2 Making Calls
Monitoring Another Extension (Call Monitor)
The preprogrammed extension can monitor another extension.
To monitor
PT/SLT/PS
5
extension no.
B.Tone
Off-hook.
Dial extension
number.
Enter 5.
To an Extension Refusing the Call (DND Override)
The preprogrammed extension can call someone who has set the DND feature.
PT/SLT/PS
While hearing the DND tone
1
Enter 1.
38
User Manual
R.B.Tone
Talk.
1.2 Making Calls
1.2.5
Accessing the ISDN Service (ISDN Service Access)
You can access services provided by the ISDN.
To access
PT/PS
(ISDN Service)
OR
outside line
(ISDN Service)
Off-hook.
Seize outside line.
(If all required digits are stored.)
service code
(ISDN Service)
(Requires to dial
additional digits.)
Press ISDN service.
Or press ISDN service and then enter service code and
then press ISDN service again.
On-hook.
•
Availability of features depends on the ISDN service of your telephone company.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit an ISDN Service button.
User Manual
39
1.2 Making Calls
1.2.6
Alternating the Calling Method (Alternate Calling—
Ring/Voice)
The caller can alternate the alerting method, either ring
or voice, when making an intercom call.
On the other hand, any extension can set the alerting
method, either ring or voice, when receiving an
intercom call.
Ringing (Default): You can call the other party
with a ring tone.
Voice-calling: You can talk to the other party
immediately after confirmation tone.
Ring
Ring
Hello
OR
To change the method
PT/SLT/PS
After dialling
C.Tone
Enter
•
•
.
Talk.
If the called party uses a single line telephone or portable station, Voice-calling is not
available.
This feature is not available when the called party’s telephone is in the Voice Call Deny
mode.
Customising Your Phone
•
3.1.2 Settings on the Programming Mode—Alternate Receiving—Ring/Voice
Select the alerting method, either ring or the other party’s voice.
40
User Manual
1.2 Making Calls
1.2.7
Calling without Restrictions
— Using Your Calling Privileges at Another Extension (Remote COS Access)
Using Your Calling Privileges at Another Extension (Remote COS
Access)
You can use your calling privileges (Class of Service) at another extension. You may override
restrictions which have been set. To use this feature, an original extension number and an extension
PIN (Personal Identification Number) are required. You can make a call by entering a verified code
and verified code PIN. For the available verified code, ask your manager.
To call (Walking COS)
PT/SLT/PS
PIN: Personal Identification Number
4
Off-hook.
Enter
your
extension no.
extension no.
extension PIN
Dial your
extension number.
Enter extension PIN
(max. 10 digits).
7
47.
desired
phone no.
extension no.
C.Tone &
D.Tone
If a wrong extension PIN is
entered, you hear an alarm tone.
Dial desired
phone number.
Seize outside line before entering
outside phone number.
To call with a verified code (Verified Code Entry)
PT/SLT/PS
PIN: Personal Identification Number
4
Off-hook.
Enter
verified code PIN
7
Enter
47.
C.Tone &
D.Tone
Enter verified code PIN
(max. 10 digits).
If a wrong verified code PIN is
entered, you hear an alarm tone.
verified code
.
Enter verified code
(max. 4 digits).
desired
phone no.
extension no.
Dial desired
phone number.
Seize outside line before entering
outside phone number.
User Manual
41
1.2 Making Calls
1.2.8
To Access Another Party Directly from Outside (Direct
Inward System Access [DISA])
— Calling through DISA
Calling through DISA
When outside callers access extensions in the
PBX, a prerecorded message greets the caller and
gives information about how to access an
extension. You do not need the operator’s
assistance.
You may be able to access system features or call
an outside party with your password depending on
the security mode. Ask your manager for the mode
assigned to your PBX.
TD A2
00
To call an extension
PIN: Personal Identification Number
From Outside Telephone
In No Security Mode/Trunk Security Mode
DISA
phone no.
Off-hook.
desired
extension no.
R.B.Tone &
DISA message
Dial DISA
phone number.
Dial desired
extension number.
In All Security Mode
DISA
phone no.
Off-hook.
your
extension no.
4
7
R.B.Tone &
DISA message
Dial DISA
phone number.
verified
code
Enter
47.
extension PIN
OR
verified code PIN
Enter extension PIN or
verified code PIN (max.10 digits).
42
User Manual
C.Tone &
D.Tone
OR
desired
extension no.
Dial desired
extension number.
Dial your extension number.
Or enter and then verified code.
1.2 Making Calls
To call an outside party
PIN: Personal Identification Number
From Outside Telephone
In No Security Mode
DISA
phone no.
Off-hook.
outside
phone no.
R.B.Tone &
DISA message
Dial DISA
phone number.
Dial outside phone
number.
Seize outside line before dialling
outside phone number.
In Trunk Security Mode/All Security Mode
DISA
phone no.
Off-hook.
your
extension no.
4
R.B.Tone &
DISA message
OR
verified
code
Enter
Dial DISA
phone number.
7
47.
Dial your extension number.
Or enter and then verified
code.
extension PIN
outside
phone no.
OR
C.Tone &
D.Tone
verified code PIN
Enter extension PIN or
verified code PIN
(max.10 digits).
Dial outside phone
number.
Seize outside line before dialling
outside phone number.
To retry
From Outside Telephone
To dial a different number during a conversation with an outside party or
while hearing the ringback, reorder, or busy tone
phone no.
DISA
message
Enter
.
Dial phone number.
Dial a line access number as the first
digit when calling an outside party.
User Manual
43
1.2 Making Calls
•
•
•
44
User Manual
WARNING
When you enable the Outside-to-Outside Call feature of DISA, and a third party
discovers the password (verified code PIN/extension PIN) of the PBX, there will be
a risk that they will make fraudulent phone calls using the telephone line, and the
cost will be charged to your own account. In order to avoid this problem, we
strongly recommend the following points:
a) Carefully maintain the secrecy of the PIN.
b) Specify a complicated PIN as long and random as you can make it.
c) Change the PIN frequently.
Time limit
Both parties will hear an alarm tone fifteen seconds before the specified time limit. To
extend, press any dial button except .
If Built-in Automated Attendant service is set, you can access the desired extension
simply by pressing a single digit (0-9) from the options given the prerecorded message.
1.2 Making Calls
1.2.9
Setting Your Telephone from Another Extension or
through DISA (Remote Setting)
You can set the following features on your telephone from another extension or through DISA.
•
Call Forwarding (FWD)/Do Not Disturb (DND)
•
Changing the Log-in/Log-out Status of Extensions
•
Absent Message
•
Extension Lock
•
Time Service—Changing the Time Mode (Day/Night/Lunch/Break)
From another extension
PT/SLT/PS
PIN: Personal Identification Number
4
Off-hook.
Enter
7
47.
your
extension no.
extension no.
extension PIN
Dial your
extension number.
Enter extension PIN
(max. 10 digits).
desired
feature no.
extension no.
C.Tone &
D.Tone
Dial desired
feature number.
If a wrong extension PIN is
entered, you hear an alarm tone.
Through DISA
PIN: Personal Identification Number
From Outside Telephone
DISA
phone no.
Off-hook.
4
R.B.Tone &
DISA message
Dial DISA
phone number.
extension PIN
Enter
7
47.
your
extension no.
extension no.
Dial your
extension number.
desired
feature no.
extension no.
C.Tone &
D.Tone
Enter extension PIN
(max. 10 digits).
Dial desired
feature number.
If a wrong extension PIN is
entered, you hear an alarm tone.
User Manual
45
1.3 Receiving Calls
1.3
Receiving Calls
1.3.1
Answering Calls
PT/SLT/PS
Off-hook.
Talk.
Select one of the following methods:
· Lift the handset to receive the preferred line.
(Default: Ringing line is selected.)
· Press the SP-PHONE button.
· Press the flashing CO, INTERCOM or ICD Group button directly.
· Press the ANSWER button.
•
The ICD Group button light shows the current status as follows:
Off: Idle
Green on: The line is in use. (You are using the line.)
Red on: Your extension is in Log-out mode from the incoming call distribution group.
Customising Your Phone
•
3.1.2 Settings on the Programming Mode—
Preferred Line Assignment—Incoming
Select the seized line when going off hook.
Alternate Receiving—Ring/Voice
Select the Calling method, either ring or the other party’s voice.
•
3.1.3 Customising the Buttons
Create or edit an Incoming Call Distribution Group (ICD Group) button.
46
User Manual
1.3 Receiving Calls
1.3.2
Answering Hands-free (Hands-free Answerback)
You can answer an incoming call without going off-hook as soon as the line is
connected. When an intercom call arrives, you will hear the caller talking without
the phone ringing. When an outside call arrives, you will hear the caller talking
after a preprogrammed number of rings. Hands-free Answerback for outside
calls requires System Programming. Consult your dealer.
To set/cancel
PT
While on-hook
AUTO ANS
MUTE
Press
AUTO ANS.
•
•
The AUTO ANS button light shows the current status as follows:
Off: Not set
On: Set
For a PS user, refer to "Operating Instructions" for PS.
User Manual
47
1.3 Receiving Calls
1.3.3
Answering a Call Ringing at Another Telephone (Call
Pickup)
— Answering a Call from Another Telephone (Call Pickup)
— Denying Other People the Possibility of Picking Up Your Calls (Call Pickup Deny)
Answering a Call from Another Telephone (Call Pickup)
You can answer an incoming call that is ringing at another extension or group from your phone without
leaving your desk.
The following types of pickup are available:
Group Call Pickup: Picks up a call within your group.
Directed Call Pickup: Picks up a specified extension’s call.
PT/SLT/PS
(DSS)
OR
4
0
group no.
Group
C.Tone
OR
4
1
extension no.
Directed
Talk.
Off-hook.
Press flashing DSS.
Enter 40 and then dial group number (2 digits).
Or enter 41 and then dial extension number.
•
•
If you receive a call waiting tone, you can ask a third party to pick up your second call
with Directed Call Pickup.
If there are multiple incoming calls for the same group, the longest waiting call is received
first.
Denying Other People the Possibility of Picking Up Your Calls
(Call Pickup Deny)
You can deny or allow other people to pick up your calls.
PT/SLT/PS
1
7
2
0
0
Off-hook.
48
User Manual
Enter
720.
Deny
OR
Allow
Enter 1 to deny
or 0 to allow.
C.Tone
On-hook.
1.3 Receiving Calls
1.3.4
Answering a Call via an External Speaker (Trunk
Answer From Any Station [TAFAS])
You can be notified of incoming outside calls through an external speaker. These calls can be
answered from any extension.
Through an external speaker
<KX-TDA100/KX-TDA200>
PT/SLT/PS
While hearing a tone
4
Off-hook.
Enter
2
42.
speaker no.
C.Tone
Dial speaker
number (1 digit).
Talk.
<KX-TDA15/KX-TDA30>
PT/SLT/PS
While hearing a tone
4
Off-hook.
•
Enter
2
42.
1
Enter 1.
C.Tone
Talk.
You can also receive a paging announcement via a speaker with this operation.
User Manual
49
1.3 Receiving Calls
1.3.5
Using the ANSWER/RELEASE Button
The ANSWER and RELEASE buttons are convenient for operators using
headsets.
With the ANSWER button, you can answer all incoming calls.
With the RELEASE button, you can disconnect the line during or after a
conversation, or complete transferring a call.
To answer
PT
ANSWER
Talk.
Press ANSWER.
To transfer a call
PT
During a conversation
(DSS)
OR
TRANSFER
desired
phone no.
Press TRANSFER. Press DSS or dial desired
phone number.
Seize outside line before
dialling outside phone number.
To talk to a waiting caller
PT
While hearing a call waiting tone
ANSWER
Press ANSWER.
50
User Manual
Talk.
RELEASE
The called
party answers.
Press RELEASE.
1.3 Receiving Calls
To transfer an outside call to an extension with a one-touch operation
PT
During a conversation
(DSS)
The called
party answers.
Press DSS.
RELEASE
Press RELEASE.
The other party is placed on hold and the
destination extension is called immediately.
To end a conversation
PT
During a conversation
RELEASE
Press RELEASE.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit an Answer button or a Release button.
User Manual
51
1.3 Receiving Calls
1.3.6
Identifying Malicious Calling Parties (Malicious Call
Identification [MCID])
You can ask your telephone company to trace a malicious calling party during a conversation or after
the calling party hangs up.
You will receive the information on the malicious call later on.
To request MCID
PT/SLT/PS
During a conversation or when hearing a reorder tone after the calling party hangs up.
TRANSFER
OR
OR
Press TRANSFER or
Recall/hookswitch.
•
52
User Manual
7
Enter
3
7 3.
C.Tone
OR
Talk or on-hook.
Availability of this feature depends on the ISDN service of your telephone company.
1.4 During a Conversation
1.4
During a Conversation
1.4.1
Transferring a Call (Call Transfer)
— Transferring to an Extension on the PBX
— Transferring to an Outside Party Using the PBX Service
— Transferring a Call Using the ISDN Service (Call Transfer [CT]—by ISDN)
•
•
You can transfer a held call without talking by going on-hook.
If a call is not retrieved within a specified time, you will hear an alarm as a reminder. And,
if an outside call is not answered within a specified time, it is automatically disconnected.
If you hear an alarm tone, the destination extension did not answer the call. Answer the
call.
Transferring to an Extension on the PBX
To transfer
PT/PS
During a conversation
(DSS)
TRANSFER
OR
C.Tone
extension no.
Talk.
Press TRANSFER.
Press DSS or dial
extension number.
On-hook.
You do not have to inform the destination
extension about where the call has been
transferred from. This can be disregarded.
SLT
During a conversation
OR
extension no.
C.Tone
Talk.
Press Recall/
hookswitch.
Dial extension number.
On-hook.
You do not have to inform the destination
extension about where the call has been
transferred from. This can be disregarded.
User Manual
53
1.4 During a Conversation
To transfer with one-touch (One-touch Transfer)
PT/PS
During a conversation
(DSS)
Press DSS.
Talk.
On-hook.
You do not have to inform the destination
extension about where the call has been
transferred from. This can be disregarded.
•
Even if the transferred party does not answer, you can go on-hook.
Transferring to an Outside Party Using the PBX Service
Some extensions may be restricted from performing this feature.
PT/PS
During a conversation
TRANSFER
outside line
outside
phone no.
Seize outside line.
Dial outside phone
number.
C.Tone
Press TRANSFER.
Talk.
On-hook.
The call is transferred.
SLT
During a conversation
OR
C.Tone
Press Recall/hookswitch.
outside line
Seize outside line.
outside
phone no.
Dial outside phone
number.
Talk.
On-hook.
The call is transferred.
54
User Manual
1.4 During a Conversation
•
•
Time limit
Both the caller and the transferred party will hear an alarm tone fifteen seconds before a
specified time period.
To return to the held call before the destination answers, press the TRANSFER
button, corresponding CO, ICD Group or INTERCOM button, or the hookswitch.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Direct Station Selection (DSS) button.
User Manual
55
1.4 During a Conversation
Transferring a Call Using the ISDN Service (Call Transfer [CT]—
by ISDN)
PT/PS
During a conversation
phone no.
(ISDN-Hold)
Press ISDN-Hold.
On-hook.
Talk.
Dial phone number.
You do not have to inform the destination
extension about where the call has been
transferred from. This can be disregarded.
PT/PS
During a conversation
OR
6
TRANSFER
C.Tone
Press TRANSFER.
Enter
phone no.
2
62.
Dial phone number.
Talk.
On-hook.
You do not have to inform the destination
extension about where the call has been
transferred from. This can be disregarded.
SLT
During a conversation
C.Tone
Press Recall/
hookswitch.
6
Enter
phone no.
2
62.
Dial phone number.
Talk.
On-hook.
You do not have to inform the destination
extension about where the call has been
transferred from. This can be disregarded.
•
•
•
To retrieve the held call, press the TRANSFER button, Recall/hookswitch.
Even if you go on-hook while transferring a call, it is transferred.
After the call is transferred, the line becomes idle.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit an ISDN-Hold button.
56
User Manual
1.4 During a Conversation
1.4.2
Holding a Call
— Holding
— Holding in a System Parking Zone (Call Park)
•
If a call is not retrieved within a specified time, you will hear an alarm as a reminder.
And, if an outside call is not answered within a specified time, it is automatically
disconnected.
Holding
There are two types of hold. The difference between them is that other people can retrieve your held
call (Regular Hold) or not (Exclusive Call Hold). As they can be alternated, ask your manager what
the current mode is.
To hold (Call Hold)
PT/PS
During a conversation
HOLD
OR
TRANSFER
5
C.Tone
0
C.Tone
On-hook.
Press HOLD, or press TRANSFER and
then enter 50.
SLT
During a conversation
5
Press Recall/
hookswitch.
Enter
0
50.
C.Tone
On-hook.
User Manual
57
1.4 During a Conversation
To retrieve a call (Call Hold Retrieve)
PT/SLT/PS
At the holding extension (Call Hold Retrieve)
(CO)
OR
INTERCOM
OR
0
5
Off-hook.
Talk.
Press flashing CO
or INTERCOM,
or enter 50.
To retrieve an outside call from another extension—only Regular Hold
(Call Hold Retrieve–Specified with a held line number)
(CO)
OR
3
5
Off-hook.
Press CO, or enter
number (3 digits).
C.Tone
held line no.
53 and then held line
Talk.
To retrieve an intercom call or outside call from another extension—only Regular Hold
(Call Hold Retrieve–Specified with a holding extension number)
(DSS)
5
1
OR
holding
extension no.
Off-hook.
•
•
58
User Manual
Enter
51.
Press DSS or dial
holding extension
number.
C.Tone
Talk.
The CO or INTERCOM button light shows the current status as follows:
— Regular Hold mode
Flashing green slowly: Your held call
Flashing red: Another extension’s held call
— Exclusive Call Hold mode
Flashing green rapidly: Your held call
Red on: Another extension’s held call
Hold Mode Change (PT only)
After pressing the HOLD button, if you press the HOLD button again, the status switches
from the Regular Hold mode to the Exclusive Call Hold mode or from the Exclusive Call
Hold mode to the Regular Hold mode.
1.4 During a Conversation
•
For simple operation, you can automatically hold a call by pressing another CO, ICD
Group or INTERCOM button, only if preprogrammed. (Automatic Call Hold) Consult your
dealer.
Holding in a System Parking Zone (Call Park)
You can put a call on hold in a common parking zone of the PBX so that any extension can retrieve
the parked call. You can use this feature as a transferring feature.
A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a
Call Park button and Call Park (Automatic Park Zone) button have been established, you can select
either way to park by simply pressing the corresponding button.
When a call is parked automatically, or more than one call has been parked at the same time, you
need to specify the parking zone number to retrieve the required call.
To set
PT/PS
During a conversation
(Call Park)
Press Call Park.
PT/PS
During a conversation
parking zone no. Specified
TRANSFER
5
2
OR
C.Tone
Auto
On-hook.
Press TRANSFER.
Enter
52.
Enter a specified parking
zone number (2 digits) or press
to park at an idle parking zone
automatically.
If you hear a busy tone, enter another
parking zone number or press again.
SLT
During a conversation
OR
5
Press Recall/
hookswitch.
Enter
2
52.
parking zone no.
C.Tone
Enter a specified parking
zone number (2 digits).
On-hook.
If you hear a busy tone, enter another
parking zone number.
User Manual
59
1.4 During a Conversation
To retrieve (Call Park Retrieve)
PT/PS
(Call Park)
Press a flashing Call Park.
PT/SLT/PS
5
Off-hook.
Enter
2
52.
stored parking
zone no.
Dial stored parking
zone number (2 digits).
C.Tone
Talk.
•
If a call is parked automatically, confirm the parking zone number on the display.
•
If you hear a reorder tone when retrieving a parked call, there is no held call. Confirm
the stored parking zone number.
After you park a call, you can perform other operations.
•
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Call Park button or Call Park (Automatic Park Zone) button.
60
User Manual
1.4 During a Conversation
1.4.3
Talking to Two Parties Alternately (Call Splitting)
When talking to one party while the other party is on hold, you can swap the calls back and forth
(alternately).
To alternate between the parties leaving one party on hold temporarily
PT/PS
During a conversation
(DSS)
OR
TRANSFER
TRANSFER
OR
C.Tone
Press TRANSFER.
extension no.
Press DSS or dial the other
party's extension number.
Talk to the
other party.
Press TRANSFER.
Talk to the
original party.
The other party will be on hold.
SLT
During a conversation
OR
OR
extension no.
C.Tone
Press Recall/
hookswitch.
Dial the other party's
extension number.
Talk to the
other party.
Press Recall/
hookswitch.
Talk to the
original party.
The other party will be on hold.
User Manual
61
1.4 During a Conversation
To leave the conversation and then let the two parties talk
PT/PS
During a conversation
(DSS)
TRANSFER
OR
OR
C.Tone
Press TRANSFER.
TRANSFER
extension no.
Press DSS or dial the other
party's extension number.
Talk to the
other party.
Press TRANSFER.
On-hook.
SLT
During a conversation
OR
extension no.
C.Tone
Press Recall/
hookswitch.
62
User Manual
Dial the other party's
extension number.
Talk to the
other party.
Press Recall/
hookswitch.
On-hook.
1.4 During a Conversation
1.4.4
Answering Call Waiting
— Answering Call Waiting in the PBX
— Answering Call Waiting from the Telephone Company
Answering Call Waiting in the PBX
During a conversation, a call waiting tone or voice announcement through the speaker or the handset
occurs when an outside call has been received or another extension is letting you know a call is
waiting. You must activate this feature to use it. (Default: Disable—No call [Intercom calls]/No tone
[Outside calls])
You can answer the second call by disconnecting (1) or holding (2) the current call.
1. To disconnect the current call and then talk to the new party
PT/SLT/PS
While hearing a tone
On-hook.
Talk to the
new party.
Off-hook.
2. To hold the current call and then talk to the new party
PT/PS
While hearing a tone
(CO)
OR
HOLD
INTERCOM
Press HOLD.
Press CO or
INTERCOM.
Talk to the
new party.
Disregard this step if both
parties are extensions.
SLT
While hearing a tone
0
5
C.Tone
Press Recall/hookswitch.
Enter
50.
Talk to the
new party.
User Manual
63
1.4 During a Conversation
After talking to the new party (second call), you can disconnect (2.1) or hold (2.2) it and then
retrieve the first call.
2.1 To disconnect the second call and then talk to the original party
PT/PS
During a conversation
(CO)
OR
INTERCOM
On-hook.
Talk to the
original party.
Press CO or
INTERCOM.
Off-hook.
PT/SLT/PS
During a conversation
0
5
C.Tone
On-hook.
Off-hook.
Enter
Talk to the
original party.
50.
2.2 To hold the second call and then talk to the original party
After holding it, you can talk to the original party. Then, you can disconnect it and then talk to the new
party again.
PT/PS
During a conversation
(CO)
OR
HOLD
INTERCOM
Press HOLD.
Talk to the
original party.
Press CO or
INTERCOM.
Disregard this step if both
parties are extensions.
(CO)
OR
INTERCOM
On-hook.
64
User Manual
Off-hook.
Press CO or
INTERCOM.
Talk to the
new party.
1.4 During a Conversation
SLT
During a conversation
0
5
C.Tone
Press Recall/
hookswitch.
Enter
Talk to the
original party.
50.
0
5
C.Tone
On-hook.
•
•
Off-hook.
Enter
50.
Talk to the
new party.
Depending on your telephone, the "Off-hook Call Announcement (OHCA)" and the
"Whisper OHCA" features can be used. You can talk to the other party through the speaker
and the microphone (OHCA) or you can receive an announcement through the handset
(Whisper OHCA), if you are having a conversation using the handset.
Refer to "1.7.3 Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/
Whisper OHCA)".
The caller’s name or number is displayed for five seconds in ten second intervals while
waiting to be answered.
Customising Your Phone
•
3.1.2 Settings on the Programming Mode—Call Waiting Tone Type Selection
If you select "Tone 1", you will hear the same tone for Call Waiting from an outside
party and an extension. If you select "Tone 2", you will hear different tones for Call
Waiting from an outside party and an extension.
15 s
Default
(Tone 1)
Special Tones
(Tone 2)
5s
OR
User Manual
65
1.4 During a Conversation
Answering Call Waiting from the Telephone Company
This is an optional telephone company service. You can receive a call waiting tone and the caller’s
information. For details, consult your telephone company.
PT/PS
While hearing a tone
FLASH/
RECALL
PT/SLT/PS
While hearing a tone
TRANSFER
OR
OR
OR
6
0
(EFA)
Press FLASH/RECALL
or EFA.
•
•
Press TRANSFER
or Recall/hookswitch.
User Manual
60.
To return to the original party, repeat the operation.
In this case, FLASH/RECALL button on proprietary telephones is in the External Feature
Access (EFA) mode.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit an External Feature Access (EFA) button.
66
Enter
1.4 During a Conversation
1.4.5
Multiple Party Conversation
—
—
—
—
—
Adding Other Parties during a Conversation (Conference)
Leaving a Conference (Unattended Conference)
Leaving a Conference (Leaving Three-party Conference)
Letting a Third Party Join Your Call (Privacy Release)
Adding a Third Party during a Conversation Using the ISDN Service (Three-party Conference
[3PTY]—by ISDN)
Adding Other Parties during a Conversation (Conference)
You can add one or more parties to your conversation.
PT/PS
During a conversation
CONF
desired
phone no.
OR
CONF
C.Tone
TRANSFER
Press CONF
or TRANSFER.
Dial desired phone
number.
Talk to the
new party.
Talk with multiple
parties.
Press CONF.
Seize outside line before
dialling outside phone number.
PT/PS
During a conversation
TRANSFER
Press TRANSFER.
desired
phone no.
Dial desired
phone number.
TRANSFER
Talk to the
new party.
Press TRANSFER.
3
C.Tone
Enter 3.
Seize outside line before
dialling outside phone number.
Talk with multiple parties.
User Manual
67
1.4 During a Conversation
SLT
During a conversation
desired
phone no.
Press Recall/
hookswitch.
Dial desired
phone number.
3
Talk to the
new party.
Press Recall/
hookswitch.
C.Tone
Enter 3.
Seize outside line before
dialling outside phone number.
Talk with multiple parties.
To add four or more parties to a conference
PT/PS
During a conversation
To continue
CONF
Press CONF.
desired
phone no.
Dial desired
phone number.
Seize outside line before
dialling outside phone number.
68
User Manual
CONF
C.Tone
Talk.
Press CONF.
Talk.
1.4 During a Conversation
To talk to two parties alternately in a three-party conversation
PT/PS
During a conversation
TRANSFER
Press TRANSFER.
SLT
During a conversation
Press Recall/hookswitch.
To disconnect one party and then talk to the other in a three-party conversation
PT/PS
During a conversation
(CO)
TRANSFER
FLASH/
RECALL
OR
INTERCOM
Press TRANSFER once
or twice to establish a
conversation with the
party to be disconnected.
Press FLASH/RECALL.*
Press the flashing CO or
INTERCOM corresponding
to the party on hold.
Talk.
The other party will be put on hold.
•
•
•
* In this case, the FLASH/RECALL button on a proprietary telephone must be in the Flash/
Recall mode.
During a three-party conversation, pressing the TRANSFER button or Recall/hookswitch
alternates between the other parties in the conversation.
You can have a conference with a maximum of eight parties (comprising intercom or
outside lines) simultaneously.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Conference button.
User Manual
69
1.4 During a Conversation
Leaving a Conference (Unattended Conference)
The other parties can continue their conversation.
To leave a conference
PT/PS
During 3- to 7-party conference
CONF
Press CONF.
On-hook.
To return while others are talking
PT
(CO)
OR
INTERCOM
Press flashing green CO or INTERCOM.
To complete a conversation
PT/SLT/PS
During a conversation
On-hook.
•
Time limit
Both parties will hear an alarm tone before a specified timeout. The originating extension
will hear an alarm tone before timeout. The call is disconnected when the time runs out
unless the originating extension returns to the conference.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Conference button.
70
User Manual
1.4 During a Conversation
Leaving a Conference (Leaving Three-party Conference)
The other two parties can continue their conversation.
To leave a conference
PT/PS
During a three-party conference
TRANSFER
Press TRANSFER.
On-hook.
SLT
During a three-party conference
Press Recall/hookswitch.
On-hook.
To complete a conversation
PT/SLT/PS
During a conversation
On-hook.
User Manual
71
1.4 During a Conversation
Letting a Third Party Join Your Call (Privacy Release)
You can let a third party join your current outside call.
To set
PT/PS
During a conversation
Ask the third party to perform the step below.
(S-CO)
C.Tone
Press green
S-CO.
(S-CO)
Press flashing green
S-CO within 5 seconds.
To prolong,
press S-CO again.
•
72
User Manual
Only an S-CO button can be used for this operation.
Talk.
A three-party conversation
is now established.
1.4 During a Conversation
Adding a Third Party during a Conversation Using the ISDN
Service (Three-party Conference [3PTY]—by ISDN)
PT/PS
During a conversation
desired
phone no.
(ISDN-Hold)
CONF
C.Tone
Dial desired phone
number.
Press ISDN-Hold.
Talk to the
new party.
Press CONF.
Talk with multiple
parties.
Seize outside line before
dialling outside phone number.
PT/PS
During a conversation
TRANSFER
C.Tone
6
Enter
Press TRANSFER.
desired
phone no.
2
62.
Dial desired
phone number.
TRANSFER
Talk to the
new party.
Press TRANSFER.
Seize outside line before
dialling outside phone number.
3
Enter 3.
C.Tone
Talk with multiple parties.
User Manual
73
1.4 During a Conversation
SLT
During a conversation
6
desired
phone no.
2
C.Tone
Enter
Press Recall/
hookswitch.
62.
Dial desired
phone number.
Seize outside line before
dialling outside phone number.
3
Enter 3.
C.Tone
Talk with multiple parties.
To complete a conversation
PT/SLT/PS
During a conversation
On-hook.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit an ISDN-Hold button.
74
User Manual
Talk to the
new party.
Press Recall/
hookswitch.
1.4 During a Conversation
1.4.6
Mute
You can disable the microphone or the handset to consult privately with others
in the room while listening to the other party on the phone through the speaker
or the handset.
To set/cancel
PT
During a conversation
AUTO ANS
MUTE
OR
VOICE CALL
MUTE
Press MUTE.
•
•
The AUTO ANS/MUTE or VOICE CALL/MUTE button light shows the current status as
follows:
Off: Normal
Flashing red: Mute
If mute is used during OHCA, it will become Handset Mute.
User Manual
75
1.4 During a Conversation
1.4.7
Letting Other People Listen to the Conversation (Offhook Monitor)
You can let other people in the room listen to the conversation through the
speaker while continuing the conversation using the handset.
To set/cancel
PT
During a conversation using the handset
SP-PHONE
Press SP-PHONE.
•
•
•
•
76
User Manual
The SP-PHONE button light shows the current status as follows:
Off: The voice is heard through the handset.
On: The voice is heard through the speaker and the handset.
This feature is controlled work by programming. Ask your manager.
This feature may not be available with certain proprietary telephones. For more details,
consult your dealer.
Hands-free operation
You can have a conversation in hands-free mode using the SP-PHONE button. You can
perform other tasks simultaneously.
Helpful hints for hands-free operation:
•
If it is difficult to hear the other party’s voice;
Raise the sound level using the Speaker Volume Control.
•
If the other party has difficulty hearing you;
Lower the sound level.
•
Absorbing echoes;
Using this unit in a room which has curtains or carpeting or both.
•
To avoid missing part of the conversations;
If you and the other party speak at the same time, parts of your conversation will be
lost. To avoid this, speak alternately.
1.4 During a Conversation
1.4.8
Using the Headset (Headset Operation)
You can have a conversation using a headset.
In this case, you must select "Headset on" in programming mode or set the
Headset button on (red) in advance.
This feature is also known as Handset/Headset Selection.
To talk using the headset
PT
SP-PHONE
Press SP-PHONE.
To use the handset during a conversation using the headset
PT
Off-hook.
To talk in hands-free mode during a conversation using the headset
PT
(Headset)
Press red Headset.
•
•
The Headset button light shows the current status as follows:
Off: Headset mode off
Red on: Headset mode on
This feature is not available for the KX-T7665.
User Manual
77
1.4 During a Conversation
Customising Your Phone
•
3.1.2 Settings on the Programming Mode—Headset Operation
Select the equipment to use.
•
3.1.3 Customising the Buttons
Create or edit a Headset button.
78
User Manual
1.5 Before Leaving Your Desk
1.5
Before Leaving Your Desk
1.5.1
Forwarding Calls
— Forwarding Your Calls (Call Forwarding [FWD])
— Forwarding Your Calls Using ISDN Service (Call Forwarding [CF]—by ISDN)
Forwarding Your Calls (Call Forwarding [FWD])
You can have your incoming calls forwarded to a
specified destination.
All Calls:
All calls are forwarded. Preset extensions may
also forward from their own receiving group.
Busy:
All calls are forwarded when your extension is
busy.
No Answer:
All calls are forwarded when you do not answer
the call within a specified time period.
Busy/No Answer (BSY/NA):
All calls are forwarded when you do not answer
within a specified time period or when your
extension is busy.
Follow Me (From):
If you fail to set the above-mentioned "All Calls" to
forward before you leave your desk, you can set
the same feature from the destination extension.
•
•
•
•
6, )
You can set the voice mail floating extension number as a forward destination to receive
calls into your mailbox.
You can set your mobile telephone as the forward destination. The voice mail can be used
to receive calls if you are unable to answer.
Incoming calls can be forwarded up to four times.
Boss & Secretary feature
The extension which has been set as the destination can call the forwarding extension.
<Example>
Call
Forwarding
extension
Forward
set
destination
User Manual
79
1.5 Before Leaving Your Desk
To set/cancel
PT/SLT/PS
0
Both Calls
OR
1
7
Outside Calls
1
OR
Intercom Calls
2
Off-hook.
Enter
71.
Enter 0 to 2 as
you desire.
0
Cancel
2
All Calls
3
Busy
4
No Answer
5
Busy/No Answer
Enter required
number.
For "Cancel", go on-hook
directly after entering 0.
destination
extension no.
OR
outside
phone no.
outside line
access no.
C.Tone
(max. 32 digits)
Enter destination extension number.
Or enter outside line access number
and then outside phone number.
Enter #.
On-hook.
To set from another extension
PT/SLT/PS
0
Both Calls
OR
1
1
7
2
Off-hook.
Enter
your
extension no.
Enter your
extension number.
•
80
User Manual
Outside Calls
OR
71.
7
8
Follow Me
Follow Me Cancel
Intercom Calls
Enter 0 to 2 as
you desire.
Enter 7 or 8.
C.Tone
On-hook.
When using a proprietary telephone, you can set or cancel Call Forwarding by pressing
the FWD/DND button (fixed button) instead of " 710".
1.5 Before Leaving Your Desk
To set the timer for "No Answer" and "Busy/No Answer"
PT/SLT/PS
7
1
Enter
Off-hook.
time
3
C.Tone
713.
On-hook.
Enter time
(seconds [2 digits]).
To set/cancel (Call Forwarding [FWD] for your Incoming Call Distribution Group)
ICD Group: Incoming Call Distribution Group
PT/SLT/PS
4
Both Calls
1
OR
1
7
5
Outside Calls
OR
6
Off-hook.
Enter
71.
Set
ICD Group
extension no.
OR
0
Cancel
Intercom Calls
Enter 4 to 6 as
you desire.
Enter 1 to set
or 0 to cancel.
Enter ICD Group
extension number.
For "Cancel", go on-hook
directly after entering ICD
Group extension number.
destination
extension no.
OR
outside line
access no.
outside
phone no.
C.Tone
(max. 32 digits)
Enter destination extension number.
Or enter outside line access number
and then outside phone number.
•
•
Enter #.
On-hook.
The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Red on: FWD mode
Flashing red slowly: DND mode
The Group FWD button light shows the current status as follows:
Off: No set
Red on: FWD mode
User Manual
81
1.5 Before Leaving Your Desk
•
The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.
(1) When in the FWD/DND Cycle Switch Mode:
Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting
as shown below:
FWD
DND
Off
(2) When in the FWD/DND Setting Mode:
•
•
Pressing the FWD/DND button (fixed button) while in idle status will take you directly
to the programming mode for the FWD/DND setting.
(Refer to "3.1.2 Settings on the Programming Mode".)
Note
A FWD/DND button (customised button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.
Transferred outside calls are also forwarded to the destination assigned for outside calls.
When intercom calls are set to be handled differently from outside calls (forwarding type,
forward destination), we recommend establishing buttons for both FWD/DND—Outside
calls and FWD/DND—Intercom calls, and/or Group FWD—Outside calls and Group
FWD—Intercom calls, because:
a) the light patterns of the FWD/DND—Both calls button (including FWD/DND button
[fixed button]) and the Group FWD—Both calls button will indicate the setting for
either outside calls or intercom calls, but not both.
Note
The FWD icon on PS display reflects the setting for outside calls only.
b) pressing the FWD/DND—Both calls button (including FWD/DND button [fixed button])
or the Group FWD—Both calls button will not change the FWD or DND mode for
intercom calls and outside calls separately.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit FWD/DND (Both calls, Outside calls, Intercom calls) buttons, or Group
FWD (Both calls, Outside calls, Intercom calls) buttons.
82
User Manual
1.5 Before Leaving Your Desk
Forwarding Your Calls Using ISDN Service (Call Forwarding
[CF]—by ISDN)
All calls are forwarded to an outside party using ISDN. The following types of call forwarding are
provided by the ISDN service.
— Unconditional (Call Forwarding Unconditional [CFU])
— When your extension is busy (Call Forwarding Busy [CFB])
— When you do not answer (Call Forwarding No Reply [CFNR])
To set
PT/SLT/PS
7
Off-hook.
#
Enter #.
Enter
5
7 5.
2 Unconditional
3 Busy
4 No Reply
outside
line no.
#
Enter outside
line number.
Enter #.
your MSN
desired phone no.
Enter required number.
Enter your multiple
subscriber number
(MSN).
#
Enter desired
phone number.
C.Tone
On-hook.
Enter #.
To cancel
PT/SLT/PS
7
Off-hook.
Enter
#
0
Enter #.
Enter 0.
5
7 5.
outside
line no.
#
Enter outside
line number.
Enter #.
your MSN
Enter your multiple
subscriber number
(MSN).
C.Tone
On-hook.
User Manual
83
1.5 Before Leaving Your Desk
To confirm the condition
PT/PS
7
Off-hook.
84
Enter
#
1
Enter #.
Enter 1.
User Manual
5
7 5.
C.Tone
outside
line no.
#
Enter outside
line number.
Enter #.
your MSN
Enter your multiple
subscriber number
(MSN).
The display shows
the selected type.
On-hook.
1.5 Before Leaving Your Desk
1.5.2
Showing a Message on the Caller’s Telephone Display
(Absent Message)
You can show the reason you do not answer, if the caller uses a Panasonic display proprietary
telephone. There are eight preprogrammed messages and one for your personal message (16
characters). The selected message is shown on the display of your telephone.
Message no.
Message (Example)
1
Will Return Soon
2
Gone Home
3
At Ext %%%% (Extension number)
4
Back at %%:%% (Hour:Minute)
5
Out until %%/%% (Month/Day)
6
In a Meeting
7
8
9
A message assigned for each extension.
(Personal Absent Message)
To set
PT/SLT/PS
Off-hook.
#
7
5
Enter
750.
0
1
2
3
4
5
6
7
8
9
Will Return Soon
Gone Home
At Ext %%%% + Extension no.
Back at %%:%% + Hour : Minute
Out until %%/%% + Month / Day
In a Meeting
Enter required number.
C.Tone
Enter #.
On-hook.
To cancel
PT/SLT/PS
Off-hook.
7
5
Enter
750.
0
0
Enter 0.
C.Tone
On-hook.
User Manual
85
1.5 Before Leaving Your Desk
•
•
•
86
User Manual
Enter the desired value in the "%" positions. You must enter the correct number of
characters as represented by the "%" using 0 to 9 or .
The default messages can be changed. Consult your dealer.
To create your personal message (Message no. 9), refer to "3.1.2 Settings on the
Programming Mode".
1.5 Before Leaving Your Desk
1.5.3
Preventing Other People from Using Your Telephone
(Extension Lock)
You can lock your extension so that other users cannot make inappropriate outside calls.
This feature is also known as Electronic Station Lockout.
To lock
PT/SLT/PS
7
7
1
C.Tone
Off-hook.
Enter
Enter 1.
77.
On-hook.
To unlock
PT/SLT/PS
PIN: Personal Identification Number
7
Off-hook.
•
•
•
Enter
7
77.
0
extension PIN
Enter 0.
Enter extension PIN
(max. 10 digits).
C.Tone
On-hook.
If you forget the extension PIN or cannot unlock your phone, consult your manager.
He can clear your extension PIN. Then, you can set the new PIN and unlock your
extension by entering it.
If your extension is locked by this feature, it cannot perform features as follows:
— Making outside calls
— Changing the call forwarding destination
If you do not set extension PIN, you cannot lock and unlock.
User Manual
87
1.6 Making/Answering an Announcement
1.6
Making/Answering an Announcement
1.6.1
Paging
— Group Paging
— Paging and then Transferring a Call
Group Paging
You can make a voice announcement to proprietary telephones or external speakers or both in the
preset group simultaneously.
To page
PT/SLT/PS
3
Off-hook.
•
Enter
paging group
no.
3
33.
Wait for an
answer.
C.Tone
Dial paging group
number (2 digits).
Talk.
Announce.
If the group which you paged is already being used for paging, you hear a busy tone.
Paging and then Transferring a Call
PT/SLT/PS
During a conversation
TRANSFER
OR
3
Enter
Press TRANSFER or
Recall/hookswitch.
3
33.
paging group
no.
C.Tone
Dial paging group
number (2 digits).
The other party is placed on hold.
Wait for an
answer.
Talk.
On-hook.
The held party and the paged extension
are connected and start a conversation.
88
User Manual
Announce.
1.6 Making/Answering an Announcement
•
After you go on-hook, the caller can talk to the person who answers the page.
User Manual
89
1.6 Making/Answering an Announcement
1.6.2
Answering/Denying a Paging Announcement
To answer
PT
4
Off-hook.
Enter
3
C.Tone
Talk.
43.
To allow/deny a paging announcement (Paging Deny)
PT
1
7
2
1
0
Off-hook.
90
Enter
721.
Deny
OR
Allow
Enter 1 or 0.
C.Tone
On-hook.
•
The following are extensions that cannot receive a paging announcement:
— Portable station
— Single line telephone
— Proprietary telephone that is ringing or busy
— Proprietary telephone in Paging Deny mode
— Proprietary telephone in DND mode
•
Even if the announcement is not paging your extension, you can answer it, if it is paging
your group.
User Manual
1.6 Making/Answering an Announcement
1.6.3
Making an Announcement and Having a Multiple Party
Conversation (Broadcasting)(KX-TDA30/KX-TDA100/
KX-TDA200 only)
You can call multiple parties assigned in the group and make a voice announcement. You can also
establish a multiple party conversation with called parties. This conversation will be heard by other
called parties.
Called parties can listen to the announcement simply by going off-hook. They can send a notification
tone if they want to join the conversation.
To make/answer a broadcasting call
PT
Caller
2
3
Off-hook.
Enter
32.
broadcasting
group no.
Wait for an
answer.
C.Tone
Announce.
Dial broadcasting
group number (1 digit).
Any Telephone
Called Party
The telephone
rings.
Off-hook.
For a caller
To make a conversation with a specific party
PT
During an announcement
(DSS)
Press DSS.
User Manual
91
1.6 Making/Answering an Announcement
To make a conversation with a party in the group’s preassigned order
PT
During an announcement
CONF
Press CONF.
To end a conversation with a specific party
PT
During a conversation
To end a conversation with a specific party
(DSS)
Press DSS.
To end a conversation with the party who
joined the conversation last
TRANSFER
Press TRANSFER.
To disconnect the party who joined the
conversation last from the broadcast
FLASH/
RECALL
Press FLASH/RECALL.
•
92
User Manual
In this case, FLASH/RECALL button is in the Flash/Recall mode.
1.6 Making/Answering an Announcement
For a called extension
To send a notification tone to the caller and join a conversation
PT/SLT/PS
Called Party
During an announcement
(DSS)
Press DSS
corresponding
to the caller.
OR
Wait for reply.
Talk.
Press Recall/
hookswitch.
PT
Caller
During an announcement
A notification tone
occurs, and the display
shows the called party's
information.
(DSS)
Press
corresponding
DSS.
Talk.
Introduce the called party to
the conversation.
•
A conversation can be established with a maximum of 4 parties (including the caller).
User Manual
93
1.7 Setting the Telephone According to Your Needs
1.7
Setting the Telephone According to Your
Needs
1.7.1
Setting the Alarm (Timed Reminder)
You can receive an alarm at your telephone to remind you of a meeting, appointment or as a wakeup call. The alarm can occur either once or daily (every day until cancelled) at a preset time. When
you go off-hook to answer, you will hear a special dial tone or prerecorded message.
To set
PT/SLT
0
12 H:
hour/minute
1
OR
7
6
Enter
Off-hook.
0
0
1
760.
Enter 1.
Enter hour (01-12) and minute (00-59) and then
0 for AM or 1 for PM.
Or enter hour (00-23) and minute (00-59).
Once
Daily
C.Tone
On-hook.
Enter 0 for once
or 1 for daily.
To cancel
PT/SLT
7
Enter
Off-hook.
6
760.
To stop or answer the ringback
PT/SLT
INTERCOM
OR
Press INTERCOM or off-hook.
94
User Manual
0
PM
hour/minute
24 H:
OR
1
AM
OR
0
Enter 0.
C.Tone
On-hook.
1.7 Setting the Telephone According to Your Needs
To confirm
PT
TRANSFER
Press TRANSFER
several times.
•
•
•
•
You can also confirm the Timed Reminder by using the soft button.
The alarm keeps ringing for preprogrammed seconds.
If you receive an incoming call during ringback, the ringing starts after the ringback
stops.
If you are having a conversation exceeding alarm ringing period, the ringback will
start after your conversation.
User Manual
95
1.7 Setting the Telephone According to Your Needs
1.7.2
Refusing Incoming Calls (Do Not Disturb [DND])
You may set this feature when you are in a meeting or busy.
To set/cancel
PT/SLT/PS
0
Both Calls
OR
7
1
1
OR
2
Off-hook.
Enter
71.
Outside Calls
Intercom Calls
Enter 0 to 2 as you desire.
1
Set
OR
0
Cancel
Enter 1 to set
or 0 to cancel.
C.Tone
On-hook.
•
When using a proprietary telephone, you can set or cancel Do Not Disturb by pressing the
FWD/DND button (fixed button) instead of " 710".
•
The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Red on: FWD mode
Flashing red slowly: DND mode
The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.
•
(1) When in the FWD/DND Cycle Switch Mode:
Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting
as shown below:
FWD
DND
Off
(2) When in the FWD/DND Setting Mode:
•
•
•
96
User Manual
Pressing the FWD/DND button (fixed button) while in idle status will take you directly
to the programming mode for the FWD/DND setting.
(Refer to "3.1.2 Settings on the Programming Mode".)
Note
A FWD/DND button (customised button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.
If your extension has set this feature, a calling extension will hear DND tone.
If this feature is set, the Call Forwarding (FWD) feature does not work.
Specified extensions can override this feature and call DND extensions (DND Override).
1.7 Setting the Telephone According to Your Needs
•
When intercom calls are set to be handled differently from outside calls (DND set/cancel),
we recommend establishing buttons for both FWD/DND—Outside calls and FWD/DND—
Intercom calls, because:
a) the light patterns of the FWD/DND—Both calls button (including FWD/DND button
[fixed button]) will indicate the setting for either outside calls or intercoms calls, but not
both.
Note
The DND icon on PS display reflects the setting for outside calls only.
b) pressing the FWD/DND—Both calls button (including FWD/DND button [fixed button])
will not change the FWD or DND mode for intercom calls and outside calls separately.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit FWD/DND (Both calls, Outside calls, Intercom calls) buttons.
User Manual
97
1.7 Setting the Telephone According to Your Needs
1.7.3
Receiving Call Waiting (Call Waiting/Off-hook Call
Announcement [OHCA]/Whisper OHCA)
During a conversation, you can be informed of a call waiting with a tone or voice announcement
through your built-in speaker or handset. (Default: Disable—No call [Intercom calls]/No tone [Outside
calls])
Call Waiting Tone:
a waiting tone through the built-in speaker of PT/handset of SLT. To change the tone from PT,
refer to "3.1.2 Settings on the Programming Mode".
OHCA:
a voice announcement through the built-in speaker
Whisper OHCA:
a voice announcement through the handset
To set/cancel for intercom calls
PT/SLT/PS
0
No call
OR
1
7
3
1
Tone
OR
2
C.Tone
OHCA
OR
Off-hook.
Enter
731.
3
On-hook.
Whisper OHCA
Enter 0 to 3 as you desire.
To set/cancel for outside calls
PT/SLT/PS
0
7
3
2
1
Off-hook.
Enter
No tone
OR
Tone
732.
C.Tone
On-hook.
Enter 0 or 1.
•
98
User Manual
OHCA and Whisper OHCA can be activated only on certain digital proprietary telephones.
In addition, Whisper OHCA requires that both you and the other party are using supported
telephones. For more details, consult your dealer.
1.7 Setting the Telephone According to Your Needs
1.7.4
Displaying Your Telephone Number on the Called Party
and Caller’s Telephone (Calling/Connected Line
Identification Presentation [CLIP/COLP])
CLIP:
When making an outside call, you can present your preprogrammed telephone number to the called
party.
COLP:
When receiving an outside call, you can present your preprogrammed telephone number to the
calling party.
You can select the telephone number sent, either the number of the line used or the number assigned
to your extension.
If you select "Public", the calling/called party sees the number of the line used (subscriber’s number).
If you select "Your extension", they see the telephone number assigned on your extension.
To show either the number assigned to the outside line or your extension
PT/SLT/PS
1
7
2
2
Off-hook.
•
Enter
7 2.
Public
OR
Your extension
Enter 1 for public or 2
for your extension.
C.Tone
On-hook.
If you use the ICD Group button to make a call to the other party, the telephone number
assigned to the ICD Group will be used.
User Manual
99
1.7 Setting the Telephone According to Your Needs
1.7.5
Preventing Your Telephone Number Being Displayed
on the Caller’s Telephone (Connected Line
Identification Restriction [COLR])
When receiving an outside call, you can select whether the caller can see your telephone number or
not.
To show/prevent
PT/SLT/PS
0
7
Off-hook.
•
•
Enter
0
7 0.
Show
OR
1
Prevent
Enter 0 to show
or 1 to prevent.
C.Tone
On-hook.
You can change the mode by pressing a preset COLR button while on-hook.
The COLR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed.
Availability of this feature depends on the ISDN service of your telephone company.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Connected Line Identification Restriction (COLR) button.
100
User Manual
1.7 Setting the Telephone According to Your Needs
1.7.6
Preventing Your Number Being Displayed on the
Called Party’s Telephone (Calling Line Identification
Restriction [CLIR])
When making an outside call, you can select whether the called party can see your telephone number
or not.
To show/prevent
PT/SLT/PS
0
7
1
1
Off-hook.
•
•
Enter
7 1.
Show
OR
Prevent
Enter 0 to show
or 1 to prevent.
C.Tone
On-hook.
You can change the mode by pressing a preset CLIR button while on-hook.
The CLIR button light shows the current status as follows:
Off: shows your telephone number.
Red on: prevents your telephone number being displayed.
Availability of this feature depends on the ISDN service of your telephone company.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Calling Line Identification Restriction (CLIR) button.
User Manual
101
1.7 Setting the Telephone According to Your Needs
1.7.7
Preventing Other People from Joining Your
Conversation (Executive Busy Override Deny)
PT/SLT/PS
1
7
3
3
0
Off-hook.
•
102
User Manual
Enter
733.
Prevent
OR
Allow
C.Tone
Enter 1 to prevent
or 0 to allow.
Some extensions may be prohibited from performing this feature.
On-hook.
1.7 Setting the Telephone According to Your Needs
1.7.8
Turning on the Background Music (BGM)
You can listen to the background music through your telephone speaker while
on-hook. An external music source, such as a radio, must be connected.
If your extension becomes busy (off-hook, making or receiving a call etc.), the
music stops temporarily. When you go back on-hook, the music starts again.
To select and set/cancel
<KX-TDA100/KX-TDA200>
PT
BGM no.
7
5
1
OR
0
Off-hook.
Enter
751.
Cancel
C.Tone
On-hook.
Enter BGM number
(1 digit) or 0 to cancel.
<KX-TDA15/KX-TDA30>
PT
1
7
5
1
0
Off-hook.
Enter
751.
Set
OR
Cancel
Enter 1 to set
or 0 to cancel.
C.Tone
On-hook.
User Manual
103
1.7 Setting the Telephone According to Your Needs
1.7.9
Protecting Your Line against Notification Tones (Data
Line Security)
You can protect the line against audible notification tones, such as a call waiting tone during a
conversation. Set this feature if your extension has a data communication device, such as a computer
or fax machine connected to ensure secure data transmission.
To set/cancel
PT/SLT/PS
1
7
3
0
0
Off-hook.
104
User Manual
Enter
730.
Set
OR
Cancel
Enter 1 to set
or 0 to cancel.
C.Tone
On-hook.
1.7 Setting the Telephone According to Your Needs
1.7.10 Checking the Time Service Status
You can check the current status of the Time Service on the
display.
PT
While on-hook
TRANSFER
OR
(Time Service
(Day/Night/
Lunch/Break))
Press TRANSFER or Time Service
(Day/Night/Lunch/Break).
•
•
The Time Service (Day/Night/Lunch/Break) button light always shows the current status
as follows:
Off: Day mode
Green on: Lunch mode
Flashing green: Break mode
Red on: Night mode
Flashing red: Holiday mode
Any extension user except the managers can check the current status by pressing the
Time Service (Day/Night/Lunch/Break) button.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Time Service (Day/Night/Lunch/Break) button.
User Manual
105
1.7 Setting the Telephone According to Your Needs
1.7.11 Setting the Parallelled Telephone to Ring (Parallelled
Telephone)
In the case where a single line telephone is connected in parallel to your digital
proprietary telephone, you can choose whether the parallelled single line
telephone will ring to an incoming call or not.
(Default: Ring)
DPT
1
3
9
0
Off-hook.
•
•
•
106
User Manual
Enter
39.
Ring
OR
No ring
Enter 1 to ring
or 0 not to ring.
C.Tone
On-hook.
Even if "No ring" is selected, calls can be made and answered on the single line
telephone by lifting the handset.
If you go off-hook while your parallelled telephone is in use, the call will switch over
to you.
This feature is not available for the KX-T7665.
1.7 Setting the Telephone According to Your Needs
1.7.12 Using Your PS in Parallel with a Wired Telephone
(Wireless XDP Parallel Mode)
Your PS can be used in parallel with a PT or SLT.
When in this mode, incoming calls to a wired telephone also ring the paired PS.
To set
PS
4
Press TALK.
Enter
8
48.
1
extension
phone no.no.
Enter 1.
Enter extension number
of the paired telephone.
C.Tone
Press CANCEL.
To cancel
PS
4
Press TALK.
•
•
Enter
8
48.
0
Enter 0.
C.Tone
Press CANCEL.
Some wired telephones are prohibited from using this feature.
If you go off-hook while your parallelled telephone is in use, the call will switch over
to you.
User Manual
107
1.7 Setting the Telephone According to Your Needs
1.7.13 Clearing Features Set at Your Extension (Extension
Feature Clear)
You can reset the settings of the following features on your extension to the default settings with one
operation.
This feature is also known as Station Programme Clear.
Features
Default Setting
Hot Line*
Off
Message Waiting—(All the messages that have been left by other extension users) Off
Call Pickup Deny
Allow
Call Forwarding (FWD)*
Off
Absent Message
Off
Paging Deny
Allow
Timed Reminder
Cleared
Do Not Disturb (DND)*
Off
Call Waiting for intercom calls*
Disable (No call)
Call Waiting for outside calls*
Disable (No
tone)
Executive Busy Override Deny
Allow
BGM
Off
Data Line Security
Off
Parallelled Telephone
The telephone in
parallel rings.
Log-in/Log-out
Log-in
* These features may not be reset depending on the system programming.
PT/SLT/PS
7
Off-hook.
•
108
User Manual
Enter
9
790.
0
C.Tone
On-hook.
For Users in Canada Only:
After performing Extension Feature Clear, the setting of Call Waiting becomes "Enable
(Tone)". In this case, dial tone 2 will be heard when you go off-hook.
1.8 Utilising the Call Centre
1.8
Utilising the Call Centre
1.8.1
Leaving an Incoming Call Distribution Group (Log-in/
Log-out, Wrap-up)
You can control your status in an incoming call
distribution group. When in the Log-out mode,
incoming calls to the group will not ring at your
extension. When you return, calls will again ring at
your extension. (Default: Log-in)
Even if your extension is logged-in, you can have a
specified time period (wrap-up time) when you will not
receive calls after completing a previous call. This
time can be used for you to write a report and so on.
You can also manually select "Not Ready" mode to
temporarily leave a distribution group.
Log-out
Log-in
Talk.
Ready
Wrap-up
Not Ready
To set Log-in/Log-out
ICD Group: Incoming Call Distribution Group
PT/SLT/PS
0
7
3
6
1
Enter
Off-hook.
ICD Group
extension no.
Log-out
OR
Log-in
Enter 0 or 1.
736.
Specified
OR
C.Tone
All
Enter ICD Group extension
number or .
On-hook.
User Manual
109
1.8 Utilising the Call Centre
ICD Group: Incoming Call Distribution Group
PT/PS
While on-hook
ICD Group
extension no.
(Log-in/Log-out)
Specified
OR
All
Press Log-in/Log-out.
Enter ICD Group extension number
or .
PT/PS
While on-hook
(Log-in/Log-out
of a specified group)
Press Log-in/Log-out of a specified group.
To enter/leave the Not Ready mode
PT/SLT/PS
1
7
3
5
0
Off-hook.
Enter
735.
Not Ready
OR
Ready
Enter 1 or 0.
C.Tone
On-hook.
To set/cancel the Not Ready mode or to leave the Wrap-up mode (To enter the Ready
mode)
PT/PS
While on-hook
(Wrap-up)
Press red or flashing red Wrap-up.*
110
User Manual
1.8 Utilising the Call Centre
•
•
•
•
•
•
* The status will be as follows:
Ready
Not Ready
Not Ready
Ready
Wrap-up
Not Ready
The Log-in/Log-out of a specified group button light shows the current status as follows:
Off: Log-in mode
Red on: Log-out mode
The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Ready
mode.
The Wrap-up button light shows the current status as follows:
Off: Ready mode
Red on: Not Ready mode
Flashing red: Wrap-up mode
In Wrap-up mode/Not Ready mode, your extension does not receive calls through any
group, even if it belongs to multiple groups.
There may be at least one extension in the incoming call distribution group that is in the
Log-in mode.
The Supervisor extension can control the Log-in/Log-out status of other extensions.
For more information, refer to "1.8.2 Monitoring and Controlling the Call Status of an
Incoming Call Distribution Group (Incoming Call Distribution Group Monitor)".
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Log-in/Log-out button, a Log-in/Log-out of a specified group button or
a Wrap-up button.
User Manual
111
1.8 Utilising the Call Centre
1.8.2
Monitoring and Controlling the Call Status of an
Incoming Call Distribution Group (Incoming Call
Distribution Group Monitor)
— Monitoring the Status of Waiting Calls
— Monitoring and Changing the Log-in/Log-out Status of Extensions
The extension assigned as a Supervisor extension can monitor and control the status of other
extensions in an incoming call distribution group. It should have a PT with 6-line display. The display
and DSS buttons show as follows:
Initial Display
<Display>
Date/Time &
extension no.
<DSS>
Busy Status Monitor
739
ICD Group
extension
no.
Monitoring the
Call Status
<Display>
Queuing Monitor
"EXIT"
<DSS>
Busy Status Monitor
"EXIT"
Monitoring the Call Status
and Log-in/Log-out Status
"SPRVS"
"EXIT"
<Display>
Queuing Monitor
<DSS>
Log-in/Log-out Monitor
"LOG"
<Display>
Call Log History
ICD Group: Incoming Call Distribution Group
<DSS>
Busy Status Monitor
Monitoring the Status of Waiting Calls
The Supervisor extension can monitor the status of calls waiting to be answered in the queue. If an
incoming call distribution group has an overflowed call, the display shows the status automatically.
The following information is displayed.
<Queuing Monitor>
•
The current date/time
•
The ICD Group extension number/name
•
The number of waiting calls
•
The longest waiting time
<Call Log History>
•
The date/time when cleared at last time
•
The total number of received calls
•
The number of overflowed calls
•
The number of unanswered calls
•
The average waiting time of queuing calls
112
User Manual
1.8 Utilising the Call Centre
To monitor
Display PT
Off-hook.
ICD Group: Incoming Call Distribution Group
7
3
Enter
739.
9
ICD Group
extension no.
Enter ICD Group
extension number.
C.Tone
On-hook.
To clear Call Log History
Display PT
LOG
Press "LOG".
•
CLEAR
Press "CLEAR".
The accumulated data is cleared.
"****" shows if the number to be displayed exceeds the maximum displayable digits.
Monitoring and Changing the Log-in/Log-out Status of
Extensions
The Supervisor extension can monitor the Log-in/Log-out status of the incoming call distribution
group members by the DSS button light. It can also change their Log-in/Log-out status if needed.
To monitor
Display PT
After viewing the status of waiting calls
SPRVS
Press "SPRVS".
User Manual
113
1.8 Utilising the Call Centre
To change the Log-in /Log-out mode
Display PT
(DSS)
Press desired DSS.
•
114
User Manual
The DSS button light shows the current status as follows:
Off: The extension is not in the group.
Green on: Log-in (Ready) mode
Flashing green: Log-in (Not Ready) mode
Red on: Log-out mode
1.8 Utilising the Call Centre
1.8.3
Forwarding a Waiting Call (Manual Queue Redirection)
When your incoming call distribution group is busy and other outside calls arrive, the arriving calls are
put in a waiting queue.
Extensions can check the status of the queue with the Hurry-up button light, and forward the longest
waiting call in the queue to a preset destination manually.
This feature is also known as Hurry-up Transfer.
To forward the waiting call
PT/PS
(Hurry-up)
Press red or flashing red Hurry-up.
•
The Hurry-up button light shows the current status as follows:
Off: No waiting call.
Red on: Some calls are waiting.
Flashing red: The number of calls exceeds the manual queue redirection level.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Hurry-up button.
User Manual
115
1.9 Using User-supplied Equipment
1.9
Using User-supplied Equipment
1.9.1
If a Doorphone/Door Opener is Connected
You can talk to a person at the door through the doorphone. Preprogrammed extensions or an outside
party can receive the calls from the doorphone. You can open the door.
— Doorphone Call
— Opening a Door (Door Open)
Doorphone Call
To call from the doorphone
Doorphone
C.Tone
Talk.
Press doorphone
button.
To answer a call from the doorphone
PT/SLT/PS
Off-hook.
To call the doorphone
PT/SLT/PS
3
Off-hook.
•
116
User Manual
Enter
1
31.
doorphone no.
C.Tone
Enter doorphone
number (2 digits).
Talk.
If no one answers a doorphone call within a specified time period, the call is cancelled.
1.9 Using User-supplied Equipment
Opening a Door (Door Open)
Some extensions may be prohibited from using this feature.
From a specified extension
PT/SLT/PS
5
Enter
Off-hook.
5
55.
doorphone no.
C.Tone
Enter doorphone
number (2 digits).
On-hook.
From any extension while talking to the doorphone
PT/SLT/PS
5
C.Tone
Enter 5.
•
On-hook.
The door open will be triggered for a specified time period.
User Manual
117
1.9 Using User-supplied Equipment
1.9.2
If a Host PBX is Connected
— Accessing External Services (External Feature Access [EFA])
Accessing External Services (External Feature Access [EFA])
You can access special features (e.g., Call Waiting) offered by a host PBX or telephone company.
This feature is only effective for an outside call.
<Example> To hold the current call and then talk to the new party
PT/PS
SLT
While hearing a tone
While hearing a tone
FLASH/
RECALL
OR
desired service
code
(EFA)
6
0
desired service
code
OR
TRANSFER
6
0
Press FLASH/RECALL or EFA.
Or press TRANSFER and
then enter 60.
•
•
Enter desired
service code.
Press Recall/
hookswitch.
Enter
User Manual
Enter desired
service code.
In this case, FLASH/RECALL button on a proprietary telephone is in the External Feature
Access (EFA) mode.
Regarding the service code, consult your dealer.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit an External Feature Access (EFA) button.
118
60.
1.9 Using User-supplied Equipment
1.9.3
If a Voice Processing System is Connected
You or an outside party can access the Voice Processing System from a telephone.
— Call Forwarding to Voice Mail (Voice Mail Integration)
If your PBX has a Panasonic Voice Processing System connected (e.g., KX-TVP/KX-TVS series)
using digital integration, the following features are also available:
— Screening Calls (Live Call Screening [LCS])
— Recording a Conversation (Two-way Record)
Call Forwarding to Voice Mail (Voice Mail Integration)
— To forward your calls to your mailbox
— To transfer a call to a mailbox
— To listen to messages
If you cannot answer calls, you can forward them to your mailbox. You can select the type of incoming
calls (Intercom Calls/Outside Calls/Both Calls). If your telephone has a Message button, the Message
light turns on and lets you know you have messages. Even if a Message button is not provided, you
will hear an indication tone* when going off-hook.
You can also transfer received outside calls to a mailbox so that calling parties can leave messages.
If you create a Voice Mail Transfer button on your phone, the transfer is done without knowing the
mailbox number (Voice Mail Transfer).
The duration for recording depends on the voice processing system.
To forward your calls to your mailbox
PT/SLT/PS
0
Both Calls
OR
7
1
1
Outside Calls
OR
2
Off-hook.
Enter
71.
Intercom Calls
Enter 0 to 2 as you desire.
0
Cancel
2
All Calls
3
Busy
4
No Answer
5
Busy/No Answer
Enter required number.
For
"Cancel",
For
"Cancel",
go on-hook
go on-hook
directly.0.
directly
after entering
voice mail floating
extension no.
#
Enter voice mail floating
extension number.
Enter #.
C.Tone
On-hook.
User Manual
119
1.9 Using User-supplied Equipment
To transfer a call to a mailbox
PT/PS
During a conversation
(DSS)
OR
(Voice Mail
Transfer)
Press Voice Mail
Transfer.
desired
extension no.
Press DSS or dial desired
extension number.
To listen to messages
PT/SLT/PS
MESSAGE
OR
voice mail floating
extension no.
Off-hook.
Press MESSAGE or enter voice
mail floating extension number.
*Indication tone after off-hook
1s
•
You can access a voice mail with one-touch.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Voice Mail Transfer button or a Message button.
120
User Manual
1.9 Using User-supplied Equipment
Screening Calls (Live Call Screening [LCS])
While a caller is leaving a message in your mailbox, you can monitor the call without answering. If you
so desire, you can answer the call while monitoring. There are two methods available (Default:
Hands-free mode).
Hands-free mode:
You can monitor the message automatically, live through the telephone speaker.
Private mode:
You will hear an alarm tone while the caller is leaving a message.
Before operating
•
•
•
•
Create a Live Call Screening (LCS) button (Personal Programming).
Select the mode, either Hands-free or Private (Personal Programming).
Set the extension PIN (Personal Identification Number).
Set the Live Call Screening feature.
To set Live Call Screening
PIN: Personal Identification Number
PT/PS
extension PIN
(Live Call
Screening)
Press Live Call
Screening.
Enter extension PIN
(max. 10 digits).
This is required only when
an extension PIN is stored.
To cancel Live Call Screening
PT/PS
(Live Call
Screening)
Press red Live Call Screening.
User Manual
121
1.9 Using User-supplied Equipment
Operation Flowchart
The operations in the shaded areas can be done hands-free.
PT/PS
Hands-free Mode
Private Mode
(Alarm Tone)
Monitoring (Hands-free)
Monitoring
SP-PHONE
OR
No operation
MONITOR
OR
Monitoring (Handset)
(Live Call
Screening)
Press SP-PHONE, MONITOR or Live Call
Screening.
Off-hook.
Stop
monitoring Answering
SP-PHONE
(Live Call
Screening)
OR
Press Live Call
Screening.
Stop
monitoring
Answering
the call
Stop
monitoring
Answering
the call
MONITOR
OR
Press
SP-PHONE
or MONITOR.
SP-PHONE
Off-hook.
•
•
•
•
OR
MONITOR
Press SP-PHONE or
MONITOR.
(Live Call
Screening)
Off-hook.
On-hook.
Press
Live Call
Screening.
The Live Call Screening (LCS) button light shows the feature status as follows:
Off: LCS is off.
Flashing green rapidly: Alerting in the Private mode.
Flashing green slowly: Monitoring.
Red on: LCS is on.
The manager extension can clear an extension PIN.
This feature is available for a single line telephone if it is connected to a proprietary
telephone in parallel. (Private mode only)
To answer the call while monitoring, press Recall/hookswitch.
Only the handset monitoring in the Private mode is available for PS users.
Customising Your Phone
•
3.1.2 Settings on the Programming Mode—Live Call Screening Mode Set
Select the mode, either monitoring the message through the speaker automatically or
receiving, while the caller leaves a message.
•
3.1.3 Customising the Buttons
Create or edit a Live Call Screening (LCS) button.
122
User Manual
1.9 Using User-supplied Equipment
Recording a Conversation (Two-way Record)
You can record a conversation into a mailbox while talking on the phone.
You can select the mailbox each time you record a conversation.
To record into your mailbox
PT/PS
During a conversation
To stop recording,
press this button again.
(Two-way
Record)
Press Two-way Record.
To record into another mailbox (Two-way Transfer)
PT/PS
During a conversation
(DSS)
OR
(Two-way
Transfer)
another
extension no.
Press Two-way
Transfer.
Press DSS or enter
another extension
number.
To stop recording,
press this button again.
To record into another mailbox with one-touch (One-touch Two-way Transfer)
PT/PS
During a conversation
(One-touch
Two-way
Transfer)
Press One-touch Two-way Transfer.
•
The Two-way Record button light, Two-way Transfer button light or One-touch Two-way
Transfer button light shows the current status as follows:
Off: Not recording.
On: Recording the conversation.
User Manual
123
1.9 Using User-supplied Equipment
•
Note:
When you record your Two-way telephone conversations, you should inform the other
party that the conversation is being recorded.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Two-way Record button, a Two-way Transfer button and a One-touch
Two-way Transfer button.
124
User Manual
1.10 After Moving to a New Location in the Office
1.10 After Moving to a New Location in the Office
1.10.1 Using the Same Settings as Your Previous Extension
(Walking Extension)
You can use the same features assigned on your previous extension even if you move to another
extension in the office.
You can retain your settings such as extension number or One-touch Dialling memory etc. on the new
extension.
This feature is also known as Walking Station.
To set
PT/SLT
Off-hook.
PIN: Personal Identification Number
7
2
Enter
727.
7
your previous
extension no.
Enter your previous
extension number.
extension PIN
D.Tone
Enter extension PIN
(max. 10 digits).
•
•
•
On-hook.
Your previous extension will get the old settings of your new extension.
This feature is available for movement between SLT and SLT, PT and PT or SLT and PT.
For more information, refer to "3.1.1 Customising Your Phone (Personal Programming)".
User Manual
125
1.11 Using a Display Proprietary Telephone
1.11 Using a Display Proprietary Telephone
1.11.1 Using the Call Log
This is available for display proprietary telephones and portable stations.
— Calling with the Incoming Call Log
— Calling with the Outgoing Call Log
Calling with the Incoming Call Log
When you receive an outside call, the caller’s information is recorded automatically in the incoming
call log. A preprogrammed number of calls can be logged per extension.
When the call log is full and other call arrives, the oldest call is deleted.
You can modify the logged telephone number.
When the Call Log button light turns on, there is a call which you did not answer.
The following information is logged.
•
Caller’s Name
•
Caller’s Phone Number
•
Date/Time call received
•
Answered or Not Answered
Confirmed or Not Confirmed
To confirm the log information with the Call Log button
Display PT
While on-hook
(Call Log)
Press Call Log until
desired party appears.
To confirm the log information with the Navigator key
T7600
While on-hook
Press Left twice.
126
User Manual
Press Up or Down until
desired party appears.
1.11 Using a Display Proprietary Telephone
To clear the log information
Display PT
While confirming the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
TRANSFER
Press TRANSFER.
To call
Display PT
While confirming the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
Off-hook.
To store the caller’s information in personal speed dialling
Display PT
While confirming the log information
(Call Log)
AUTO DIAL
OR
STORE
Press Call Log, or Up or Down
until desired party appears.
Press STORE.
User Manual
127
1.11 Using a Display Proprietary Telephone
•
The Call Log button light shows the current status as follows:
Off: No incoming call. Or you have already viewed the call log.
Red on: You have missed calls to view.
If your call is answered by another extension, the caller’s information is recorded on the
displays of both your extension and the answering extension.
You can lock your call log by using an extension PIN (Personal Identification Number), so
that you can prohibit access to your logged information. Refer to "3.1.2 Settings on the
Programming Mode".
You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).
If a call arrives while you are using the call log, the call log display will be replaced with the
caller’s information.
•
•
•
•
Customising Your Phone
3.1.3 Customising the Buttons
Create or edit a Call Log button or Call Log for ICD Group button.
Calling with the Outgoing Call Log
You can redial using the outgoing call log.
To call
T7600
While on-hook
Press Left.
Press Up or Down
until desired number
appears.
Off-hook.
To call with the REDIAL button
Display PT
While on-hook
REDIAL
Press REDIAL to
display the outgoing
call log.*
•
•
128
User Manual
REDIAL
Press REDIAL
until desired number
appears.
Off-hook.
* System programming is required for this operation. Consult your dealer.
This operation is available only for digital proprietary telephones with a display.
1.11 Using a Display Proprietary Telephone
To store the caller’s information in personal speed dialling
Display PT
When the desired party is displayed
AUTO DIAL
STORE
Press STORE.
•
•
You can lock your call log by using an extension PIN (Personal Identification Number), so
that you can prohibit access to your logged information. Refer to "3.1.2 Settings on the
Programming Mode".
If a call arrives while you are using the call log, the call log display will be replaced with the
caller’s information.
User Manual
129
1.11 Using a Display Proprietary Telephone
1.11.2 Using the Directories
You can call using the directories (Personal Speed Dialling Directory, System Speed Dialling
Directory and Extension Number Directory).
Only personal directories can be stored, edited or deleted on your extension.
If a call arrives while you are using a directory, the display will be replaced with the caller’s information.
— Calling with the Directory
— Storing Names and Numbers
— Entering Characters
Calling with the Directory
To select and call
T7600
While on-hook
Press Right until
desired directory
appears.*
•
Press Up or Down
until desired
party appears.
Off-hook.
* The display order is as follows:
One time: Personal Speed Dialling Directory
Two times: System Speed Dialling Directory
Three times: Extension Number Directory
To cancel or exit, press the CANCEL or FLASH button.
•
•
Directory entries generally should include name and number. If the name is not registered,
an entry cannot be displayed.
The System Speed Dialling Directory can be displayed simply by pressing the AUTO DIAL/
STORE button while on-hook.
•
Storing Names and Numbers
To store a Personal Speed Dialling Directory item
Display PT
While on-hook
phone no.
Enter phone number
(max. 32 digits).
130
User Manual
PROGRAM
OR
name
OR
AUTO DIAL
AUTO DIAL
STORE
STORE
Press ENTER
or STORE.
Enter name
(max. 20 characters).
Press ENTER
or STORE.
OR
PAUSE
Press PROGRAM
or PAUSE.
1.11 Using a Display Proprietary Telephone
•
•
•
Telephone numbers and names displayed are stored using the first spare Personal Speed
Dialling memory available.
For a PS user, refer to "Operating Instructions" for PS.
For more details, refer to "To store the names and numbers in personal speed dialling" in
"3.1.2 Settings on the Programming Mode".
Entering Characters
You can enter the following characters. The tables show you the characters available for each button.
Table 1 or Table 2 can be programmed.
User Manual
131
1.11 Using a Display Proprietary Telephone
Table 1 (Standard mode)
Times
Buttons
1
2
3
4
1
!
?
"
1
2
A
B
C
3
D
E
4
G
5
5
6
7
a
b
c
2
F
d
e
f
3
H
I
g
h
i
4
J
K
L
j
k
l
5
6
M
N
O
m
n
o
6
7
P
Q
R
S
p
q
r
8
T
U
V
t
u
v
8
9
W
X
Y
Z
w
x
y
0
(Space)
.
,
'
:
;
0
/
+
—
=
<
>
$
%
&
@
(
)
#
132
User Manual
8
9
s
7
z
9
£
#
1.11 Using a Display Proprietary Telephone
Table 2 (Option mode)
Times
Buttons
1
2
3
4
5
6
7
1
!
?
"
ä
ö
ü
1
2
A
B
C
a
b
c
3
D
E
F
d
e
4
G
H
I
g
5
J
K
L
6
M
N
7
P
8
8
9
10
11
12
13
14
15
À
Á
Â
Ã
Ä
Å
Æ
Ç
2
f
Ð
È
É
Ê
Ë
3
h
i
Ì
Í
Î
Ï
4
j
k
l
5
O
m
n
o
Ñ
Ò
Ó
Ô
Õ
Ø
Œ
6
Q
R
S
p
q
r
s
Š
ß
7
T
U
V
t
u
v
Ù
Ú
Û
Ü
8
9
W
X
Y
Z
w
x
y
z
ý
Z
9
0
(Space)
.
,
'
:
;
0
/
+
—
=
<
>
$
%
&
@
(
)
£
#
#
Ö
User Manual
133
1.11 Using a Display Proprietary Telephone
Table 2 (Option mode for CE model)
Times
Buttons
1
2
3
4
5
6
7
1
!
?
"
ä
ö
ü
1
2
A
B
C
a
b
c
3
D
E
F
d
e
4
G
H
I
g
5
J
K
L
6
M
N
7
P
8
8
9
10
11
12
13
14
15
Á
Â
Ã
Ä
A
C
Ç
C
2
f
D
Ð
É
E
Ë
e
3
h
i
Í
Î
4
j
k
l
L’
L
5
O
m
n
o
N
N
Ó
Ô
Õ
Ö
6
Q
R
S
p
q
r
s
R
R
Š
S
S
ß
7
T
U
V
t
u
v
T
T
u
Ú
U
Ü
8
9
W
X
Y
Z
w
x
y
z
Z
Z
Z
ý
9
0
(Space)
.
,
'
:
;
0
/
+
—
=
<
>
$
%
&
@
(
)
£
#
#
134
User Manual
’
1.11 Using a Display Proprietary Telephone
Table 2 (Option mode for GR model)
Times
Buttons
1
2
3
4
1
!
?
"
1
2
A
B
Γ
2
3
∆
E
Z
3
4
H
Θ
I
4
5
K
Λ
M
5
6
N
Ξ
O
6
7
Π
P
Σ
7
8
T
Y
Φ
8
9
X
Ψ
Ω
9
0
(Space)
.
,
/
+
$
%
#
5
6
7
'
:
;
0
—
=
<
>
&
@
(
)
8
9
£
#
User Manual
135
1.11 Using a Display Proprietary Telephone
Table 2 (Option mode for RU model)
Times
Buttons
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
(Space)
0
#
136
User Manual
/
+
—
=
<
>
$
%
&
@
(
)
#
11
1.11 Using a Display Proprietary Telephone
1.11.3 Accessing System Features (System Feature Access)
You can access a feature with the "Feature Access" menu.
To access "Feature Access" menu and select the feature
T7600
While on-hook
Press Right
four times.
Press ENTER.
Press Up or Down
until the feature appears.
Features
Refer to
Automatic Callback Busy Cancel
1.2.4 When the Dialled Line is Busy or There is No
Answer
Group Call Pickup
1.3.3 Answering a Call Ringing at Another Telephone
(Call Pickup)
Directed Call Pickup
1.3.3 Answering a Call Ringing at Another Telephone
(Call Pickup)
Doorphone Call
1.9.1 If a Doorphone/Door Opener is Connected
Door Open
1.9.1 If a Doorphone/Door Opener is Connected
External Background Music
2.1.4 Turning on the External Background Music (BGM)
Paging
1.6.1 Paging
User Manual
137
1.11 Using a Display Proprietary Telephone
138
User Manual
Section
2
Manager Operation
This chapter shows the manager how to control the
other extensions or the PBX.
User Manual
139
2.1 Control Features
2.1
Control Features
2.1.1
Extension Control
The manager extension can control the settings of other extensions.
— Changing the Settings of Other Extensions
Changing the Settings of Other Extensions
To lock/unlock other extensions (Remote Extension Lock)
This feature is also known as Remote Station Lock Control.
PT/SLT/PS
2
7
8
3
Off-hook.
•
140
User Manual
Enter
78.
Unlock
extension no.
OR
Lock
Enter 2 to unlock
or 3 to lock.
Enter extension
number.
On-hook.
If your extension is unlocked by the Remote Extension Lock feature, the Extension Lock
assigned by itself will be unlocked.
2.1 Control Features
2.1.2
Time Service Mode Control
The manager extension or the preprogrammed extension can change the time mode (Day, Lunch,
Break or Night).
There are two methods (Automatic or Manual) of changing the time modes.
Automatic: enables the time mode for each day of the week to change automatically. You may also
change it manually.
Manual: enables to change a mode in manual as follows.
To change the time mode (Day/Night/Lunch/Break)
PT/PS
While on-hook
(Time Service
(Day/Night/
Lunch/Break))
Press Time Service
(Day/Night/Lunch/Break)
until the desired mode
appears.
PT/SLT/PS
0 Day
7
8
0
1 Night
2 Lunch
C.Tone
3 Break
Off-hook.
Enter
780.
Enter 0 to 3
as you desire.
On-hook.
To select the time service switching mode (Automatic/Manual)
PT/PS
While on-hook
(Time Service
Switching Mode
(Automatic/Manual))
Press Time Service Switching
Mode (Automatic/Manual).
User Manual
141
2.1 Control Features
•
•
•
Besides the time mode, there is Holiday mode. It can change mode once on a specified
date.
The Time Service (Day/Night/Lunch/Break) button light shows the current status as
follows:
Off: Day mode
Green on: Lunch mode
Flashing green: Break mode
Red on: Night mode
Flashing red: Holiday mode
The Time Service Switching Mode (Automatic/Manual) button light shows the current
status as follows:
Off: Automatic
Red on: Manual
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Time Service (Day/Night/Lunch/Break) button or a Time Service
Switching Mode (Automatic/Manual) button.
142
User Manual
2.1 Control Features
2.1.3
Restriction Level Control (Dial Tone Transfer)
The manager extension can change the restriction level, permitting an extension
to make a call.
PT/PS
During a conversation with an extension
(Toll Restriction/
Call Barring)
C.Tone
Press Toll Restriction/
Call Barring.
On-hook.
The extension can hear the dial
tone and then make a call.
•
The restriction level is changed to the preprogrammed level of Toll Restriction/Call Barring
button.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit a Toll Restriction/Call Barring button.
User Manual
143
2.1 Control Features
2.1.4
Turning on the External Background Music (BGM)
The manager extension can select and broadcast background music in the office through external
speakers.
To select and start/stop the background music
<KX-TDA100/KX-TDA200>
PT/SLT/PS
external
pager no.
3
5
BGM no.
OR
OR
0
Off-hook.
Enter
Enter external
pager number
(1 digit) or for all.
35.
C.Tone
Enter BGM number
(1 digit) or 0 to stop.
On-hook.
<KX-TDA15/KX-TDA30>
PT/SLT/PS
1
3
5
1
0
Off-hook.
144
User Manual
Enter
35.
Enter 1.
Start
OR
Stop
Enter 1 to start
or 0 to stop.
C.Tone
On-hook.
2.1 Control Features
2.1.5
Recording Outgoing Messages (OGM)
The manager extension can record three kinds of greeting messages (OGM) as follows:
1. DISA message: Used to greet and guide callers so that they access
extension group or outside party without operator assistance.
2. Incoming Call Distribution Group message: Used to greet and guide
callers to an incoming call distribution group.
3. Timed Reminder message: Used for a wake-up call message when the
extension answers the Timed Reminder.
All messages have their own extension numbers. You can select the desired message. You have two
methods for recording a message. One is recorded using the handset, and the other is recorded from
an external BGM (MOH) port.
To record
PT
3
Off-hook.
Enter
6
36.
AUTO DIAL
STORE
1
Enter 1.
OGM floating
extension no.
Progress
Tone &
C.Tone
Enter OGM floating
extension number.
Record
message.
The message
is played back.
C.Tone
Press STORE.
On-hook.
When the time limit passes,
it stops automatically.
To play back
PT
3
Off-hook.
Enter
6
36.
2
OGM floating
extension no.
Enter 2.
Enter OGM floating
extension number.
C.Tone
The message
is played back.
On-hook.
User Manual
145
2.1 Control Features
To record from an external BGM (MOH) port
<KX-TDA100/KX-TDA200>
PT
3
Off-hook.
Enter
6
BGM port
no.
OGM floating
extension no.
Enter BGM port
number (1 digit).
Enter OGM floating
extension number.
3
36.
Enter 3.
You hear
the message.
The message
is recorded.
CONF
C.Tone
Progress
Tone &
C.Tone
AUTO DIAL
C.Tone
STORE
Press STORE.
Press CONF.
When the time limit
passes, it stops
automatically.
The message
is played back.
On-hook.
<KX-TDA15/KX-TDA30>
PT
3
Off-hook.
Enter
You hear
the message.
6
3
36.
Enter 31.
CONF
C.Tone
Press CONF.
On-hook.
User Manual
OGM floating
extension no.
Enter OGM floating
extension number.
The message
is recorded.
Progress
Tone &
C.Tone
AUTO DIAL
STORE
C.Tone
Press STORE.
When the time limit
passes, it stops
automatically.
The message
is played back.
146
1
2.1 Control Features
To clear the message
PT
3
Off-hook.
•
Enter
6
36.
0
OGM floating
extension no.
Enter 0.
Enter OGM floating
extension number.
Progress
Tone &
C.Tone
On-hook.
Record voice messages only; avoid the recording of music.
User Manual
147
2.1 Control Features
148
User Manual
Section
3
Customising Your Phone & System
This chapter shows you how to customise your
individual telephone or PBX according to your needs.
Find the desired setting and program as necessary.
User Manual
149
3.1 Customising Your Phone (Personal Programming)
3.1
Customising Your Phone (Personal
Programming)
3.1.1
Customising Your Phone (Personal Programming)
You can customise your telephone features. For example, you can change the initial settings or button
features according to your needs.
— Assigning an Extension PIN to Your Extension (Extension PIN [Personal Identification Number])
•
If you change your desk and extension, refer to "1.10.1 Using the Same Settings as Your
Previous Extension (Walking Extension)".
Assigning an Extension PIN to Your Extension (Extension PIN
[Personal Identification Number])
You can assign a password to each extension.
The following features require an extension PIN.
1. Screening calls (Live Call Screening [LCS])
2. Prohibiting other people from seeing your personal directory and call log (Directory and Call
Log Lock)
3. Using the same settings as your extension at other extensions (Walking Extension)
4. Remote Control Operation (Walking COS)
5. Extension Lock Clear
To set
PT/SLT/PS
Off-hook.
#
Enter #.
150
User Manual
PIN: Personal Identification Number
7
9
Enter
799.
same
extension PIN
Enter same extension PIN
(max. 10 digits).
extension PIN
1
9
Enter 1.
#
Enter extension PIN
(max. 10 digits).
C.Tone
Enter #.
On-hook.
3.1 Customising Your Phone (Personal Programming)
To cancel
PT/SLT/PS
Off-hook.
PIN: Personal Identification Number
7
9
Enter
799.
9
0
Enter 0.
stored
extension PIN
C.Tone
Enter stored
extension PIN.
On-hook.
•
•
•
•
WARNING
When a third party discovers the password (extension PIN) of the PBX, there will be
a risk that they will make fraudulent phone calls using the telephone line, and the
cost will be charged to your own account. In order to avoid this problem, we
strongly recommend the following points:
a) Carefully maintain the secrecy of the PIN.
b) Specify a complicated PIN as long and random as you can make it.
c) Change the PIN frequently.
Valid numbers for an extension PIN are "0" through "9".
If the wrong extension PIN is entered for a preprogrammed number of times, the PIN is
locked.
If you forget your extension PIN or your extension PIN is locked, your manager can clear
the extension PIN and extension PIN lock.
User Manual
151
3.1 Customising Your Phone (Personal Programming)
3.1.2
Settings on the Programming Mode
You can programme features using the programming mode.
— Setting Features
— Clearing Features
•
•
To exit at any time, lift the handset.
To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Setting Features
The default settings are shown in bold letters. For later reference, place a check mark in the boxes
below to indicate your customised setting.
Notice
The default value may vary depending on country/area. For more details, consult your dealer.
To enter the programming mode
To programme
To exit
PROGRAM
OR
PROGRAM
programming
input
selection &
parameter
OR
AUTO DIAL
PAUSE
OR
OR
AUTO DIAL
PAUSE
STORE
Press PROGRAM
or PAUSE.
Follow
programming
input.
Item
Programming
Input
STORE
Press ENTER
or STORE.
Follow Selection Press ENTER Press PROGRAM
& Parameter.
or PAUSE.
or STORE.
Selection & Parameter
PT: The display shows the PBX number, slot number
and port number.
<example>
Your extension information
0
EXT1050:10308
PBX no.
Port no.
Slot no.
0
PS: The display shows the PS number.
<example>
EXT3001:99001
PS no.
Preferred display contrast
level from the 4 levels
available.
(Display Contrast
Selection)*1
152
User Manual
0
1
Light
2
Little Light
3
Little Dark
4
Dark
1
3.1 Customising Your Phone (Personal Programming)
Item
Which display language do
you prefer?
(Display Language
Selection)
Would you like the call
duration to be shown
automatically on the display
when answering an outside
call?
(Display Switching Mode)
Would you like to turn on
the display backlight of the
KX-T7633/KX-T7636?
(Display Backlight
Selection)*1
Would you like to dial a
preset number simply by
going off-hook?
Should you prevent your
number being displayed on
the called party’s
telephone?
(Calling Line Identification
Restriction [CLIR])
Which number should be
displayed on the called and
calling party’s telephone?
(Calling/Connected Line
Identification Presentation
[CLIP/COLP])
Programming
Input
0
0
0
2
4
1
1
2
1
1
English
2
2nd Language
3
3rd Language
4
4th Language
5
5th Language
0
No—Manual (The display
keeps showing all of the outside
caller’s information unless you
change it to the call duration
manually.)
1
Yes—Automatic (The first
line of the display will change
to the call duration
automatically when you
answer an outside call.)
3
1
1
Selection & Parameter
0
Yes—ON in use
1
Yes—always ON
2
No—always OFF
desired no. (max. 32 digits)
0
Do not use
1
Use
0
No—Allows your number
to be displayed
1
Yes—Prevent your number
being displayed
0
Caller ID assigned to your
extension
1
Caller ID assigned on the outside
line being used
3
4
User Manual
153
3.1 Customising Your Phone (Personal Programming)
Item
Which do you prefer to
seize when you go off-hook
to make calls?
(Preferred Line
Assignment—Outgoing)
Programming
Input
1
9
Selection & Parameter
0
No line
1
An idle outside line
2 +
CO button no.
(01-36)*2
or
A CO/ICD Group button
(CO)
3
or
INTERCOM
0
Which line do you prefer to
answer when you go offhook?
(Preferred Line
Assignment—Incoming)
1
2
0
2 +
CO button no.
(01-36)*2
or
Intercom
No line
The longest ringing line
(when multiple calls arrive)
An assigned outside button
(CO)
0
How do you prefer to
receive an intercom call?
(Alternate Receiving—
Ring/Voice)*1
Should the single line
telephone in parallel ring?
(Parallelled Telephone)*1*3
154
User Manual
2
2
Ringing (Tone Call)
1
Directly—The party’s voice is
heard without ringing.
2
Ring only—Prohibiting the
caller switching to the voice
mode.
0
No—The telephone will not
ring.
1
Yes—The telephone will
ring.
1
2
3.1 Customising Your Phone (Personal Programming)
Item
Do you prefer to answer a
call without going off-hook
regardless of the AUTO
ANS button status?
(Forced Answerback
Selection)*1
Which service do you prefer
when a calling party is
recording a message in
your mailbox?
(Live Call Screening Mode
Set)*1
Programming
Input
2
2
Would you like to keep
recording after answering
the call in the LCS mode?
(LCS Mode Set [After
Answering])
2
Do you prefer to receive call
waiting for outside calls?
3
Which type of call waiting
for intercom calls do you
prefer?
(Call Waiting Selection)
Which type of call waiting
tone do you prefer?
(Call Waiting Tone Type
Selection)
Would you like to show a
message on the caller’s
telephone display?
(Absent Message)
3
3
4
Selection & Parameter
0
No—Disable
1
Yes—Enable
3
0
You can monitor the
message through the telephone
speaker. (Hands-free mode)
1
Only an alarm tone is heard.
(Private mode)
5
0
No—Stop recording
1
Yes—Keep recording
0
No (No tone)
1
Yes (Tone)
0
No call
1
Tone
6
0
1
2
Voice announcement
through the built-in speaker
(OHCA)*4
3
Voice announcement
through the handset (Whisper
OHCA)*4
0
Tone 1
1
Tone 2
0
No—Off
2
0
message no. (1-8)
9
Yes—Shows the selected
message.
Yes—Shows your personal
message.
User Manual
155
3.1 Customising Your Phone (Personal Programming)
Item
Programming
Input
Creating your personal
message.
(Personal Absent Message)
4
5
message (max. 16 characters)
1
0
/
FWD/DND
(for both calls)
Where are your incoming
calls forwarded or refused?
(Call Forwarding [FWD])/Do
Not Disturb [DND])
Selection & Parameter
5
1
(for outside
calls)
0
Off
1
Do Not Disturb (DND)
2 + desired no.
(max. 32 digits)
All—Forward all calls
3 + desired no.
Busy—Forwarded when your
(max. 32 digits)
extension is busy.
4 + desired no.
No Answer—Forwarded
(max. 32 digits)
when you do not answer.
5
2
(for intercom
calls)
156
To set the timer for "No
Answer" and "Busy/No
Answer".
(FWD N/A Timer)
5
3
Should you prohibit other
people from picking up your
calls?
(Call Pickup Deny)
6
0
Do you use the headset?
(Headset Operation)*1*3
6
Do you prohibit other
people from joining your
conversation?
(Executive Busy Override
Deny)
6
Would you like to prohibit
paging announcements?
(Paging Deny)*1
6
Do you prefer to hear the
key pad tone?
(Key Pad Tone Set)*1
6
User Manual
Busy/No Answer—
5 + desired no. Forwarded when you do not
(max. 32 digits)
answer or when your extension is
busy.
(0-120) seconds
(Default: 15 seconds)
0
No—Allow
1
Yes—Deny
0
No—Headset off
1
Yes—Headset on
0
No—Allow
1
Yes—Deny
0
No—Allow
1
Yes—Deny
0
No—Off
1
Yes—On
1
2
3
4
3.1 Customising Your Phone (Personal Programming)
Item
Programming
Input
Selection & Parameter
0
Do you want back ground
music through your
telephone speaker while
on-hook?
(Background Music
[BGM])*1
KX-TDA100/KXTDA200:
6
5
1
+ BGM no.
(1 digit)
KX-TDA15/KXTDA30:
1
Would you like to set your
extension PIN or change a
stored extension PIN to new
one?
(Extension PIN [Personal
Identification Number])
No—Off
1
extension PIN
(max. 10 digits) +
To set an extension PIN
ENTER/STORE +
same extension PIN
9
0
stored extension PIN
+
new extension PIN To change a stored extension
(max. 10 digits) + PIN to new one
ENTER/STORE +
same extension PIN
extension PIN
(max. 10 digits) +
To prevent other people
from using your telephone.
(Extension Lock)
To unlock
0
9
1
extension PIN
(max. 10 digits)
+
To prevent other people
from seeing your personal
directory and call log.
(Directory and Call Log
Lock)*1
Yes—On
To lock
1
extension PIN
(max. 10 digits) +
To unlock
0
9
2
extension PIN
(max. 10 digits) +
To lock
1
Do you prefer to set the
One-touch dialling only?
(One-touch Dialling
Assignment Mode
Selection)
0
No—Normal (Any Flexible
CO buttons can be modified.)
1
Yes—Only One-touch dialling
buttons can be modified.
However, to modify them, there is
no need to enter "2" before the
number.
#
*1: Not available for a PS
User Manual
157
3.1 Customising Your Phone (Personal Programming)
*2: CO button numbers (25-36) are available only when the Add-on Key Module is set up to your
telephone.
*3: Not available for the KX-T7665
*4: Only available for certain digital proprietary telephones. Consult your dealer.
•
WARNING
When a third party discovers the password (extension PIN) of the PBX, there will be
a risk that they will make fraudulent phone calls using the telephone line, and the
cost will be charged to your own account. In order to avoid this problem, we
strongly recommend the following points:
a) Carefully maintain the secrecy of the PIN.
b) Specify a complicated PIN as long and random as you can make it.
c) Change the PIN frequently.
After the programme number is entered, the programme title is displayed.
The programming screen can be changed with the Navigator key (Up or Down).
•
•
You can select the parameter with the Navigator Key (Up or Down) instead of entering a
number.
To store the names and numbers in personal speed dialling
PROGRAM
1
0
personal speed
dialling no.
OR
OR
AUTO DIAL
PAUSE
STORE
Press PROGRAM
or PAUSE.
phone no.
Enter personal speed
dialling number (2 digits).
Enter 10 and then press ENTER.
Or press STORE.
OR
name
STORE
STORE
Enter phone number
(max. 32 digits).
Press ENTER
or STORE.
Enter name*
(max. 20 characters).
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
•
158
User Manual
OR
AUTO DIAL
AUTO DIAL
* To enter characters, refer to "Entering Characters".
Press ENTER
or STORE.
3.1 Customising Your Phone (Personal Programming)
To edit the names and numbers of personal speed dialling
PROGRAM
1
0
personal speed
dialling no.
OR
OR
AUTO DIAL
PAUSE
STORE
Press PROGRAM
or PAUSE.
Enter 10 and then press ENTER.
Or press STORE.
Enter personal speed
dialling number (2 digits).
To erase a number or character
CLEAR
Press Left or Right
to select a desired part.
Press "CLEAR".
OR
AUTO DIAL
STORE
To insert a number or character
number/character
Press Left or Right
to select a desired part.
Press ENTER
or STORE.
Enter a number or
character.
It will be inserted in front
of the selected part.
User Manual
159
3.1 Customising Your Phone (Personal Programming)
Clearing Features
You can clear or change to features as follows:
Features
160
Default Setting
Display Switching Mode
Automatic
Hot Line
Off
Calling Line Identification Restriction [CLIR]
Allow
Calling/Connected Line Identification Presentation [CLIP/
COLP]
Caller ID assigned on your
extension
Preferred Line Assignment—Outgoing
Intercom
Preferred Line Assignment—Incoming
The longest ringing line
Alternate Receiving—Ring/Voice
Ringing (Tone Call)
Parallelled Telephone
Paired SLT will ring
Forced Answerback Selection
Disable
Live Call Screening Mode Set
Hands-free mode
LCS Mode Set [After Answering]
Stop recording
Call Waiting Selection—Intercom/Outside Calls
Disable (No call/No tone)
Call Waiting Tone Type Selection
Tone 1
Absent Message
Off
Personal Absent Message
Cleared
Call Forwarding [FWD]/Do Not Disturb [DND]—Intercom/
Outside Calls
Off
FWD N/A Timer
15 seconds
Call Pickup Deny
Allow
Headset Operation
Headset off
Executive Busy Override Deny
Allow
Paging Deny
Allow
Key Pad Tone Set
On
Background Music [BGM]
Off
Data Line Security
Off
Connected Line Identification Restriction [COLR]
Allow
Log-in/Log-out
Log-in
Message Waiting
Off
Timed Reminder
Cleared
User Manual
3.1 Customising Your Phone (Personal Programming)
To set
PROGRAM
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
•
Enter ##.
OR
OR
AUTO DIAL
AUTO DIAL
STORE
STORE
Press ENTER
or STORE.
Press ENTER
or STORE.
OR
PAUSE
Press PROGRAM
or PAUSE.
If you do not desire that the Call Waiting, FWD/DND or Hot Line to be cleared by this
feature, please ask your dealer.
User Manual
161
3.1 Customising Your Phone (Personal Programming)
3.1.3
Customising the Buttons
You can change the flexible CO buttons/DSS buttons, and programmable feature (PF) buttons on
PTs, DSS Consoles, Add-on Key Modules, and PSs to the following feature buttons. For example, if
your telephone has more CO buttons than available outside lines, you may change unused CO
buttons to one touch buttons.
•
To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
To enter the programming mode
To programme
To exit
To continue
PROGRAM
OR
PROGRAM
(CO, DSS, PF)
programming
input
OR
OR
PAUSE
PAUSE
AUTO DIAL
STORE
Press PROGRAM
or PAUSE.
Buttons
Press CO,
DSS or PF.
Follow
Press ENTER
programming input. or STORE.
Programmable
Button
CO
DSS
Press PROGRAM
or PAUSE.
Programming Input
PF
Loop-CO (L-CO)
Group-CO (G-CO)
#
+ Outside line group no. (2 digits)
Single-CO (S-CO)
0
+ Outside line no. (3 digits)
Direct Station Selection (DSS)
1
+ Extension no.
One-touch Dialling*1
2 *²
Incoming Call Distribution
Group (ICD Group)
Message
Message for another extension
162
+ Desired no. (max. 32 digits)
3
0 + Incoming call distribution group
extension no.
4
0
4
0 + Extension no./Incoming call
distribution group extension no.
Call Forwarding (FWD)/Do Not
Disturb (DND)—Both calls
4
1
FWD/DND—Outside calls
4
2
FWD/DND—Intercom calls
4
3
User Manual
3.1 Customising Your Phone (Personal Programming)
Buttons
Programmable
Button
CO
DSS
Programming Input
PF
Group FWD—Both calls
4
4 + Incoming call distribution group
extension no.
Group FWD—Outside calls
4
5 + Incoming call distribution group
extension no.
Group FWD—Intercom calls
4
6 + Incoming call distribution group
extension no.
Account
4
8
Conference
4
9
Terminate
5
0
External Feature Access (EFA)
5
1
Charge Reference
5
2
Call Park
5
3
Call Park (Automatic Park
Zone)
5
3
Call Log*3
5
4
Call Log for ICD Group*3
Log-in/Log-out
Log-in/Log-out of a specified
group
Log-in/Log-out for all groups
Hurry-up
+ Parking zone no. (2 digits)
5
4 + Incoming call distribution group
extension no.
5
5
5
5 + Incoming call distribution group
extension no.
5
5
5
6 + Incoming call distribution group
extension no.
Wrap-up
5
7
System Alarm*3
5
8
Time Service (Day/Night/
Lunch/Break)
5
9
Answer*3
6
0
+ 0/1/2/3*4 (+
#
+ Tenant no.)
User Manual
163
3.1 Customising Your Phone (Personal Programming)
Programmable
Button
Buttons
CO
DSS
Release*3
Programming Input
PF
6
6
(1-7)
Toll Restriction/Call Barring
1
2
+ Toll Restriction/Call Barring Level
+ Desired no. (max. 32 digits)
ISDN Service*5
6
3
Calling Line Identification
Restriction (CLIR)
6
4
Connected Line Identification
Restriction (COLR)
6
5
ISDN-Hold
6
6
Headset*3*6
6
7
Time Service Switching Mode
(Automatic/Manual)
6
8
(+ Tenant no.)
Two-way Record*7
9
0
+ Voice mail floating extension no.
Two-way Transfer*7
9
1
+ Voice mail floating extension no.
9
1 + Voice mail floating extension no. +
# + Extension no./Incoming call distribution group
extension no.
One-touch Two-way Transfer*7
Live Call Screening (LCS)*7
9
2
Voice Mail Transfer*7
9
4
•
+ Voice mail floating extension no.
*1 " ", "#", FLASH/RECALL, PAUSE, SECRET (INTERCOM) and T (Transfer) can also be
stored.
If you do not want to display the stored number when making a call, press the SECRET
(INTERCOM) button before and after the numbers you wish to conceal.
If you store an outside party’s number, you should first store a line access number.
If you need to enter an account code, you can enter the specified account code before the
line access number.
<Example>
SECRET
49
1234
Account code feature no. Account code
164
User Manual
#
0/9
[ 123 4567 ]
Account code delimiter
Automatic line
access number
Phone number
3.1 Customising Your Phone (Personal Programming)
•
*2 For a PF button, "2" is not required to enter before the desired number.
•
*3 This button is not available for a PS.
•
*4 0: Day/Night/Lunch/Break, 1: Day/Night/Break, 2: Day/Night/Lunch, 3: Day/Night
•
*5 Availability of this button depends on the ISDN service of your telephone company.
Refer to "1.2.5 Accessing the ISDN Service (ISDN Service Access)".
•
*6 This button is not available for the KX-T7665.
•
•
*7 This button is used for the integrated voice mail features.
To exit at any time, lift the handset.
•
You can select the parameter with the Navigator key (Up or Down) instead of entering a
number.
To distinguish the ringing tones for each CO, INTERCOM or ICD Group button (Digital
proprietary telephone only)
To continue
PROGRAM
(CO)
OR
(CO)
OR
INTERCOM
INTERCOM
OR
OR
(ICD Group)
(ICD Group)
tone type no.
R.Tone
Press
PROGRAM.
•
Press CO,
INTERCOM
or ICD Group.
Press CO,
INTERCOM
or ICD Group.
PROGRAM
OR
AUTO DIAL
STORE
Enter tone type
number.*
Press ENTER or
STORE.
Press
PROGRAM.
* Available tone types vary depending on the telephone you are using:
•
KX-T7600 series (except KX-T7665): Tone types "01" to "30" are available.
•
KX-T7665: Only tone types "01" to "08" are available.
It is possible to enter a tone type number from "09" to "30", but you will hear tone type
"01".
•
Other telephones: Only tone types "01" to "08" are available.
It is possible to enter a tone type number from "09" to "30", but you will hear tone type
"02".
To clear the button
To continue
PROGRAM
PROGRAM
OR
(CO, DSS, PF)
2
PAUSE
OR
OR
AUTO DIAL
PAUSE
STORE
Press PROGRAM
or PAUSE.
Press CO,
DSS or PF.
Enter 2.
Press ENTER or
STORE.
Press PROGRAM
or PAUSE.
User Manual
165
3.2 Manager Programming
3.2
Manager Programming
3.2.1
Programming Information
The manager can programme the following items.
•
Call Charges
•
Other Extensions Control
Available Extension
The extension assigned as a manager
Required Telephone
A Panasonic Proprietary Telephone with display (over 2 lines)
(e.g., KX-T7636)
Manager Password
To enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234)
Conditions
The programming extension must be idle, on-hook and holding no calls.
166
User Manual
3.2 Manager Programming
3.2.2
Manager Programming
Changing Call Charges and Extension Control
To enter the programming mode
To exit
To programme
To continue
PROGRAM
manager
password
1
OR
OR
programming
input
PAUSE
Press PROGRAM Enter
or PAUSE.
1.
PROGRAM
HOLD
PAUSE
Follow
programming
input.
Enter manager
password.
Item
Press
HOLD.
Press PROGRAM
or PAUSE.
Programming Input
Changing the manager password.
0
0
+
+ Password (max. 10 digits) +
Viewing extension call charges.
0
1
+
+ Extension no.
Clearing extension call charges.
0
1
+
+ Extension no. +
Setting the budget for extension call
charges.
0
2
+
+ Extension no. + Charge* +
Viewing call charges for each verified
code.
0
3
+
+ Verified code
Clearing call charges for each verified
code.
0
3
+
+ Verified code +
Setting the budget for each verified code.
0
4
+
+ Verified code + Charge* +
Viewing call charges for each outside
line.
0
5
+
+ Outside line no. (3 digits)
0
6
+
+ Outside line group no. (2 digits) +
Assigning a charge rate for each outside
line group.
+
+
Charge rate* +
Clearing all charges.
0
7
+
+
Printing the total call charge.
0
8
+
+
Locking/unlocking other extensions.
(Remote Extension Lock)
9
0
+
+ Extension no. +
Clearing the PIN and PIN lock for
extensions.
0
9
1
(to lock)/
(to unlock) +
1
+
+ Extension no. +
User Manual
167
3.2 Manager Programming
Item
Clearing the PIN and PIN lock for verified
codes.
Setting the verified code PIN.
168
Programming Input
9
2
+
+ Verified code +
9
3
+
+ Verified code + PIN (max. 10 digits) +
•
WARNING
When a third party discovers the password (verified code PIN) of the PBX, there will
be a risk that they will make fraudulent phone calls using the telephone line, and the
cost will be charged to your own account. In order to avoid this problem, we
strongly recommend the following points:
a) Carefully maintain the secrecy of the PIN.
b) Specify a complicated PIN as long and random as you can make it.
c) Change the PIN frequently.
•
* To enter a decimal point, press
User Manual
.
3.3 Customising Your System (System Programming)
3.3
Customising Your System (System
Programming)
3.3.1
Programming Information
You can customise your system according to your requirements.
[Your system already has default settings (factory installed).]
The programming is shown below. (Programme number)
•
The date and time [000]
•
System speed dialling numbers and names [001]/[002]
•
Extension number and name [003]/[004]
Available Extension
The extension allowed through COS programming
Required Telephone
A Panasonic Proprietary Telephone with display (over 2 lines)
(e.g., KX-T7636)
System Password
To enter programming mode, the system password (max. 10 digits) is required. (Default: 1234)
Conditions
The programming extension must be idle, on-hook and holding no calls.
List
Before programming, decide the settings and write them down. Your notes will provide a useful record
of the programming for future reference. Your dealer also has programming records which contain all
of the system programming. You may ask for photo copies of these tables to be aware of the facilities
and features available.
User Manual
169
3.3 Customising Your System (System Programming)
Icon Descriptions
Fixed Buttons
Function
T7600
T7200/T7400/T7500
REDIAL
SP-PHONE
PREVIOUS (PREV)
NEXT
FWD/DND
CONF
AUTO DIAL
STORE (ENTER)
STORE
PROGRAM
PAUSE
HOLD
AUTO ANS
None
Back to Previous Menu (CANCEL)
SHIFT
SHIFT
PROGRAM
END
MESSAGE
SELECT
MUTE
FLASH/
RECALL
TRANSFER
INTERCOM
170
User Manual
FLASH
CLEAR
SECRET
3.3 Customising Your System (System Programming)
Procedure
The basic steps are shown below.
1. Entering the programming mode
PROGRAM
system password
OR
PAUSE
Press PROGRAM
or PAUSE.
Enter
.
Enter system password.
2. Programming
You can enter each programme number (3 digits).
•
To exit the programming mode at any time, lift the handset.
3. Exiting the mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
•
To exit the programming mode at any time, lift the handset.
User Manual
171
3.3 Customising Your System (System Programming)
3.3.2
System Programming
Date & Time [000]
The proprietary telephones display the current date and time while on-hook.
[In 12-hour Format]
0
0
date
year
0
SELECT
(AUTO ANS/MUTE,
MESSAGE)
Enter 000.
Press ENTER.
Enter year
(00-99).
Press ENTER. Press NEXT.
Press SELECT
for month.
Press Right.
Enter date
(01-31).
hour
minute
AM/PM
Enter hour
(01-12).
Enter minute
(00-59).
Select
AM or PM.
To end
END
(HOLD)
Press ENTER.
Press END.
[In 24-hour Format]
0
0
year
0
SELECT
(AUTO ANS/MUTE,
MESSAGE)
Enter 000.
Press ENTER.
Press ENTER.
To end
END
(HOLD)
Press END.
172
User Manual
date
Enter year
(00-99).
Press NEXT.
Press SELECT
for month.
Press Right.
hour
minute
Enter hour
(00-23).
Enter minute
(00-59).
Enter date
(01-31).
Press ENTER.
3.3 Customising Your System (System Programming)
•
•
•
•
•
After changing the desired values, you can press the ENTER button. You do not have
to perform the rest of the steps.
The clock starts immediately after the ENTER button is pressed.
You cannot leave a value empty.
You can clear the entry by pressing the CLEAR button.
To confirm your entry after storing data:
— The STORE button light: Lights red.
— Confirmation Tone:
One beep: Your entry is accepted.
Three beeps: Your entry is rejected.
System Speed Dialling Number [001]
You can store the phone numbers of frequently dialled numbers.
To end
0
0
Enter 001.
1
Press ENTER.
system speed
dialling no.
phone no.
Enter system
speed dialling
number (3 digits).
Enter phone
number
(max. 32 digits).
Press ENTER. Press END.
To continue
OR
Press NEXT. Press PREV.
Press CANCEL.
•
If the desired number is more than 32 digits, divide the number and store it into a speed
dialling number.
•
" ", "#", FLASH/RECALL, PAUSE, and SECRET (INTERCOM) can also be stored.
If you do not want to display the stored number when making a call, press the SECRET
(INTERCOM) button before and after the numbers you wish to conceal.
If you store an outside party’s number, you should first store a line access number.
If you need to enter an account code, you can enter the specified account code before the
line access number.
<Example>
SECRET
49
1234
Account code feature no. Account code
#
0/9
[ 123 4567 ]
Account code delimiter
Automatic line
access number
Phone number
User Manual
173
3.3 Customising Your System (System Programming)
System Speed Dialling Name [002]
You can store the name associated with the speed dialling number. These names are displayed when
making calls using the display operation. To enter characters, refer to "Entering Characters".
To end
0
0
2
Enter 002.
Press ENTER.
system speed
dialling no.
name
Enter system
speed dialling
number (3 digits).
Enter name
(max. 20
characters).
Press ENTER.
Press END.
To continue
OR
Press NEXT. Press PREV.
Press CANCEL.
Extension Number [003]
You can assign an extension number to each extension.
To end
0
0
3
Enter 003.
Press ENTER.
extension no.
new extension no.
Enter extension
number.
Enter new
extension number.
Press ENTER.
Press END.
To continue
OR
Press NEXT. Press PREV.
Press CANCEL.
•
•
174
User Manual
The leading number(s) should be the same as the number(s) assigned for Flexible
Numbering. Consult your dealer.
A duplicate entry is invalid.
3.3 Customising Your System (System Programming)
Extension Name [004]
You can store the name of an extension user. This is useful if you want to know who is calling, or who
you are calling when making an intercom call using the directory.
To enter characters, refer to "Entering Characters".
To end
0
0
Enter 004.
4
extension no.
Press ENTER.
Enter extension
number.
name
Enter name
Press ENTER.
(max. 20 characters).
Press END.
To continue
OR
Press NEXT.Press PREV.
Press CANCEL.
User Manual
175
3.3 Customising Your System (System Programming)
176
User Manual
Section
4
Appendix
This chapter provides the Troubleshooting, the Feature
Number Table and Tone List. Check the
Troubleshooting section before consulting your dealer.
User Manual
177
4.1 Troubleshooting
4.1
Troubleshooting
4.1.1
Troubleshooting
Troubleshooting
Problem
Remedy
The telephone does not work properly.
•
I cannot use the telephone.
•
•
Consult your dealer.
The telephone is locked.
Unlock your telephone. (
1.5.3
Preventing Other People from Using Your
Telephone (Extension Lock), 2.1.1 Extension
Control)
Your telephone is connected to an eXtra
Device Port.
System programming is required. Consult
your dealer.
Some features do not work.
•
•
System management may restrict certain
features.
Consult your manager.
The feature numbers have changed.
Confirm the revised number and try again.
Even though following the manual
instructions, none of the operations
work when using a proprietary
telephone.
•
The Intercom line was not seized. The seized
line, when going off-hook, was changed by
personal setting. (
3.1.2 Settings on the
Programming Mode)
In the manual, going off-hook means an
Intercom line is seized.
If the setting has been changed, press the
INTERCOM button after going off-hook and
follow the instructions.
178
The parallelled single line telephones do
not ring.
•
"No ring" may be selected.
Change the setting to ring. (
1.7.11 Setting
the Parallelled Telephone to Ring (Parallelled
Telephone))
The telephone does not work using the
personal settings or with other settings.
(One-touch dialling, forwarding
destination, etc.)
•
The extension line has been changed. The
previous telephone’s settings have not been
cleared.
User Manual
Clear the settings and then programme
your desired settings again. (
1.7.13
Clearing Features Set at Your Extension
(Extension Feature Clear), 3.1.1 Customising
Your Phone (Personal Programming), 3.1.3
Customising the Buttons)
4.1 Troubleshooting
Problem
My proprietary telephone does not have
a feature button.
Remedy
•
Some models do not have the feature button.
Change a flexible button to the desired
button. (
3.1.3 Customising the Buttons)
Enter the specified feature number instead
of the feature button. (
1.1.1 Before
Operating the Telephones)
A reorder tone is audible or "Restricted"
is displayed.
•
The telephone is locked.
•
Unlock your telephone. (
1.5.3
Preventing Other People from Using Your
Telephone (Extension Lock), 2.1.1 Extension
Control)
Toll restriction is activated.
Consult your manager or dealer.
•
An account code is required. (
1.2.7
Calling without Restrictions, Using an Account
Code (Account Code Entry) in 1.2.1 Basic
Calling)
I cannot make an outside call using the
One-touch Dialling button or speed
dialling.
•
A line access number was not stored.
I cannot remember the feature numbers.
•
Ask your dealer to change the feature
numbers for easier use.
While talking to an outside party, the line
is disconnected.
•
The time limit has run out. (
1.4.1
Transferring a Call (Call Transfer), 1.4.5 Multiple
Party Conversation)
A line access number is required for outside
calls. (
1.2.1 Basic Calling, 3.1.3
Customising the Buttons)
Consult your dealer to extend the time, if
necessary.
Redialling does not function.
•
The stored number was more than 32 digits
or an extension number. (
1.2.3 Redial)
The personal computer and fax machine
communication failed.
•
An indication tone may have interrupted
communication. (
1.7.9 Protecting Your
Line against Notification Tones (Data Line
Security))
I do not want to show my telephone
number to the calling or called party’s
telephone.
•
I want to show my telephone number to
the calling or called party’s telephone.
•
Consult your manager or dealer.
(
1.7.4 Displaying Your Telephone Number
on the Called Party and Caller’s Telephone
(Calling/Connected Line Identification
Presentation [CLIP/COLP]))
User Manual
179
4.1 Troubleshooting
Problem
I cannot send a call waiting tone to the
dialled extension.
Remedy
•
•
The other party has not set the Call Waiting
feature.
(
Sending a Call Waiting Tone (Call
Waiting), 1.4.4 Answering Call Waiting, 1.7.3
Receiving Call Waiting (Call Waiting/Off-hook
Call Announcement [OHCA]/Whisper OHCA))
The other party has set Data Line Security.
(
1.7.9 Protecting Your Line against
Notification Tones (Data Line Security))
I forgot the password.
•
Ask the manager to assist you.
(
2.1.1 Extension Control)
The background music started suddenly.
•
Turn off the music.
(
1.7.8 Turning on the Background Music
(BGM), 2.1.4 Turning on the External
Background Music (BGM))
I do not want to display a number which
is stored in memory.
•
Conceal the number.
(
Storing Names and Numbers, 3.1.3
Customising the Buttons)
I want to confirm my extension number.
•
(
Your Extension Number in 1.1.1 Before
Operating the Telephones)
The date and time are not correct.
•
Set the date and time by system
programming. (
Date & Time [000] in 3.3.2
System Programming)
The display is not shown well.
•
Change the Display contrast level.
3.1.2 Settings on the Programming Mode)
(
180
I want to distinguish the tones.
•
(
To distinguish the ringing tones for each
CO, INTERCOM or ICD Group button (Digital
proprietary telephone only), 3.1.3 Customising
the Buttons)
The MESSAGE button light lit.
•
Another extension left you a message
waiting indication while you were on the
phone or away from your desk.
User Manual
4.2 Feature Number Table
4.2
Feature Number Table
4.2.1
Feature Number Table
Numbers listed below are the default settings. There are flexible feature numbers and fixed feature
numbers. If you change the flexible feature numbers, fill in your assigned numbers (new) in the list for
future reference.
Default
(New)
Feature (While dial tone is heard)
Additional digits
1.2.1 Basic Calling
To an operator (Operator Call)
9/0
(
To select an idle outside line automatically
(Automatic Line Access)
To select an idle outside line in the specified
outside line group automatically (Outside Line
Group Access)
Making a Call to a Private Network (TIE Line
Access)
)
0/9
(
outside phone no.
)
8
(
outside line group no. (2 digits) + outside
) phone no.
7
(
Using an Account Code (Account Code Entry)
private phone no.
)
account code + # + outside phone no.
49
(
)
1.2.2 Easy Dialling
Using Numbers Stored at Your Extension
(Personal Speed Dialling)
– To store
(
personal speed dialling no. (2 digits) +
) phone no. + #
(
)
30
– To dial
+ personal speed dialling no. (2 digits)
Using Numbers Stored in the PBX (System
Speed Dialling)
– To dial
system speed dialling no. (3 digits)
(
To a Preset Number by Going Off-hook (Hot
Line)
)
740
(
)
– To store
2 + phone no. + #
– To set
1
– To cancel
0
1.2.3 Redial
Redialling the Last Number You Dialled (Last
Number Redial)
#
(
)
User Manual
181
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
Additional digits
1.2.4 When the Dialled Line is Busy or There is
No Answer
To cancel callback ringing (Automatic Callback
Busy Cancel)/To cancel (CCBS Cancel)
Leaving a Message Waiting Indication/Calling
Back the Caller Who Left an Indication
(Message Waiting)
46
(
)
70
(
)
For a caller
– To leave/cancel
1/0 + extension no.
For a called extension
– To call back
2
– To clear
0 + your extension no.
1.2.7 Calling without Restrictions
Using Your Calling Privileges at Another
Extension (Remote COS Access)
extension no. + extension PIN + phone no.
47
(
)
To call with a verified code (Verified Code Entry)
+ verified code + verified code PIN +
phone no.
1.2.8 To Access Another Party Directly from
Outside (Direct Inward System Access [DISA])
Calling through DISA
– To an extension
(In All Security Mode only)
your extension no./( + verified code) +
extension PIN/verified code PIN + extension
no.
– To an outside party
(In Trunk Security Mode/All Security Mode
only)
your extension no./( + verified code) +
extension PIN/verified code PIN + outside
phone no.
1.2.9 Setting Your Telephone from Another
Extension or through DISA (Remote Setting)
your extension no. + extension PIN + feature
no.
– From another extension
– Through DISA
1.3.3 Answering a Call Ringing at Another
Telephone (Call Pickup)
Answering a Call from Another Telephone (Call
Pickup)
– Group
(
– Directed
User Manual
)
extension no.
41
(
182
group no. (2 digits)
40
)
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
Denying Other People the Possibility of Picking
Up Your Calls (Call Pickup Deny)
Additional digits
720
(
)
– To deny
1
– To allow
0
1.3.4 Answering a Call via an External Speaker
(Trunk Answer From Any Station [TAFAS])
– Calls through an external speaker
42
(
1.3.6 Identifying Malicious Calling Parties
(Malicious Call Identification [MCID])
KX-TDA100/KX-TDA200: speaker no. (1
) digit)
KX-TDA15/KX-TDA30: 1
7 3
(
)
1.4.1 Transferring a Call (Call Transfer)
Transferring a Call Using the ISDN Service
(Call Transfer [CT]—by ISDN)
phone no.
62
(
)
1.4.2 Holding a Call
To hold (Call Hold)/To retrieve a call (Call Hold
Retrieve)
50
(
)
To retrieve a call (Call Hold Retrieve)
– Specified with a held line number
– Specified with a holding extension number
)
extension no. which has a held call
51
(
Holding in a System Parking Zone (Call Park)
– To set
outside line no. which is held (3 digits)
53
(
)
52
(
)
– To retrieve
parking zone no. (2 digits)/
stored parking zone no. (2 digits)
1.4.4 Answering Call Waiting
Answering Call Waiting in the PBX
50
(
Answering Call Waiting from the Telephone
Company
)
60
(
)
1.4.5 Multiple Party Conversation
Adding a Third Party during a Conversation
Using the ISDN Service (Three-party
Conference [3PTY]—by ISDN)
phone no. + 3
62
(
)
User Manual
183
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
Additional digits
1.5.1 Forwarding Calls
Forwarding Your Calls (Call Forwarding [FWD])/
1.7.2 Refusing Incoming Calls (Do Not Disturb
[DND])
– Both Calls
0 (Cancel)/
710
(
– Outside Calls
)
1 (Do Not Disturb [DND])/
711
(
– Intercom Calls
)
2 (All calls) + phone no. + #/
712
(
) 3 (Busy) + phone no. + #/
4 (No Answer) + phone no. + #/
5 (Busy/No Answer) + phone no. + #/
7 (Follow Me) + your extension no./
8 (Follow Me Cancel) + your extension no.
– To set the timer for "No Answer" and
"Busy/No Answer"
00-99 (second)
713
(
)
To set/cancel (Call Forwarding [FWD] for your
Incoming Call Distribution Group)
– Both Calls
714
(
– Outside Calls
715
(
– Intercom Calls
)
716
(
Forwarding Your Calls Using ISDN Service
(Call Forwarding [CF]—by ISDN)
1 (Set) + ICD Group extension no. + phone
) no. + #/0 (Cancel) + ICD Group extension
no.
)
7 5
(
)
– To set
outside line no. + # + multiple subscriber no.
+ # + 2 (Unconditional)/3 (Busy)/4 (No
Reply) + phone no. + #
– To cancel
outside line no. + # + multiple subscriber no.
+#+0
– To confirm
outside line no. + # + multiple subscriber no.
+#+1
1.5.2 Showing a Message on the Caller’s
Telephone Display (Absent Message)
750
(
)
– To set
1-9 (+ parameter) + #
– To cancel
0
184
User Manual
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
1.5.3 Preventing Other People from Using Your
Telephone (Extension Lock)
Additional digits
77
(
)
– To lock
1
– To unlock
0 + extension PIN
1.6.1 Paging
Group Paging
paging group no. (2 digits)
33
(
)
1.6.2 Answering/Denying a Paging
Announcement
– To answer
43
(
– To deny
)
1
721
(
)
– To allow
0
1.6.3 Making an Announcement and Having a
Multiple Party Conversation
(Broadcasting)(KX-TDA30/KX-TDA100/KXTDA200 only)
– To call and make an announcement
1.7.1 Setting the Alarm (Timed Reminder)
– To set
broadcasting group no. (1 digit)
32
(
)
760
(
) 12H: 1 + hour/minute + 0 (AM)/1 (PM) + 0
(once)/1 (daily)
24H: 1 + hour/minute + 0 (once)/1 (daily)
– To cancel
0
1.7.3 Receiving Call Waiting (Call Waiting/Offhook Call Announcement [OHCA]/Whisper
OHCA)
– For intercom calls
(No call/Tone/OHCA/Whisper OHCA)
– For outside calls
(No tone/Tone)
731
(
0 (No call)/1 (Tone)/2 (OHCA)/3 (Whisper
) OHCA)
0 (No tone)/1 (Tone)
732
(
1.7.4 Displaying Your Telephone Number on the
Called Party and Caller’s Telephone (Calling/
(
Connected Line Identification Presentation
[CLIP/COLP])
)
7 2
)
– Public
1
– Your extension
2
User Manual
185
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
1.7.5 Preventing Your Telephone Number Being
Displayed on the Caller’s Telephone
(
(Connected Line Identification Restriction
[COLR])
Additional digits
7 0
)
– To show
0
– To prevent
1
1.7.6 Preventing Your Number Being Displayed
on the Called Party’s Telephone (Calling Line
Identification Restriction [CLIR])
7 1
(
)
– To show
0
– To prevent
1
1.7.7 Preventing Other People from Joining
Your Conversation (Executive Busy Override
Deny)
733
(
)
– To prevent
1
– To allow
0
1.7.8 Turning on the Background Music (BGM)
– To set
751
(
) KX-TDA100/KX-TDA200: BGM no. (1 digit)
KX-TDA15/KX-TDA30: 1
– To cancel
1.7.9 Protecting Your Line against Notification
Tones (Data Line Security)
0
730
(
)
– To set
1
– To cancel
0
1.7.11 Setting the Parallelled Telephone to Ring
(Parallelled Telephone)
(
39
)
– Ring
1
– No Ring
0
1.7.12 Using Your PS in Parallel with a Wired
Telephone (Wireless XDP Parallel Mode)
48
(
)
– To set
1 + paired wired extension no.
– To cancel
0
1.7.13 Clearing Features Set at Your Extension
(Extension Feature Clear)
186
User Manual
790
(
)
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
Additional digits
1.8.1 Leaving an Incoming Call Distribution
Group (Log-in/Log-out, Wrap-up)
Log-in
Log-out
736
(
To enter/leave the Not Ready mode
0 + ICD Group extension no./
1 (Not Ready)/0 (Ready)
735
(
*2 1.8.2 Monitoring and Controlling the Call
Status of an Incoming Call Distribution Group
(Incoming Call Distribution Group Monitor)
1 + ICD Group extension no./
)
)
ICD Group extension no.
739
(
)
1.9.1 If a Doorphone/Door Opener is
Connected
Doorphone Call
doorphone no. (2 digits)
31
(
Opening a Door (Door Open)
)
doorphone no. (2 digits)
55
(
)
1.9.2 If a Host PBX is Connected
Accessing External Services (External Feature
Access [EFA])
service code
60
(
)
1.9.3 If a Voice Processing System is
Connected
Call Forwarding to Voice Mail (Voice Mail
Integration)
– Both Calls
0 (Cancel)/
710
(
– Outside Calls
)
2 (All Calls)/
711
(
– Intercom Calls
)
712
(
3 (Busy)/
) 4 (No Answer)/
5 (Busy/No Answer)
+ voice mail floating extension no. + #
1.10.1 Using the Same Settings as Your
Previous Extension (Walking Extension)
your previous extension no. + extension PIN
727
(
)
User Manual
187
4.2 Feature Number Table
Default
(New)
Feature (While dial tone is heard)
Additional digits
2.1.1 Extension Control
*1 To lock/unlock other extensions (Remote
Extension Lock)
– To unlock
(
– To lock
)
*1 2.1.2 Time Service Mode Control
*1 2.1.4 Turning on the External Background
Music (BGM)
extension no.
783
(
– Day/Night/Lunch/Break
extension no.
782
)
780
(
)
0/1/2/3
35
(
)
– To play
KX-TDA100/KX-TDA200: external pager no.
(1 digit)/ + BGM no. (1 digit)
KX-TDA15/KX-TDA30: 11
– To stop
KX-TDA100/KX-TDA200: external pager no.
(1 digit)/ + 0
KX-TDA15/KX-TDA30: 10
*1 2.1.5 Recording Outgoing Messages (OGM)
– To record
36
(
)
– To play back
1 + OGM floating extension no.
2 + OGM floating extension no.
– To record from an external BGM (MOH)
port
KX-TDA100/KX-TDA200: 3 + BGM port no.
(1 digit) + OGM floating extension no.
KX-TDA15/KX-TDA30: 31 + OGM floating
extension no.
– To clear
0 + OGM floating extension no.
3.1.1 Customising Your Phone (Personal
Programming)
Assigning an Extension PIN to Your Extension
(Extension PIN [Personal Identification
Number])
799
(
)
– To set
1 + extension PIN + # + same extension PIN
+#
– To cancel
0 + stored extension PIN
*1 : Manager only
*2 : Supervisor only
188
User Manual
4.2 Feature Number Table
Feature (While busy, DND or call tone is heard)
Default
1.2.4 When the Dialled Line is Busy or There is No Answer
Sending a Call Waiting Tone (Call Waiting)
1
To an Extension Refusing the Call (DND Override)
Joining an Existing Call (Executive Busy Override)
3
Leaving a Message Waiting Indication/Calling Back the Caller Who Left an
Indication (Message Waiting)
– To leave
4
Monitoring Another Extension (Call Monitor)
5
Reserving a Busy Line (Automatic Callback Busy)/Setting Callback on an
ISDN Line (Completion of Calls to Busy Subscriber [CCBS])
6
1.2.6 Alternating the Calling Method (Alternate Calling—Ring/Voice)
Feature (While dialling or talking)
Fixed
Number
1.4.5 Multiple Party Conversation
Adding Other Parties during a Conversation (Conference)
3
1.9.1 If a Doorphone/Door Opener is Connected
From any extension while talking to the doorphone
5
User Manual
189
4.3 What is This Tone?
4.3
What is This Tone?
4.3.1
What is This Tone?
While on-hook
Ring Tones
The following tones are
programmable allowing
recognition of call type
(Outside, Intercom or
Doorphone).
Tone 1
1s
Tone 2
Tone 3
Tone 4
When going off-hook
Dial Tones
Tone 1
Normal
190
User Manual
1s
4.3 What is This Tone?
Tone 2
1s
Any one of the following
features is set:
•
Absent Message
•
Background Music
•
Call Forwarding
•
Call Pickup Deny
•
Call Waiting
•
Do Not Disturb
•
Extension Lock
•
Executive Busy
Override Deny
•
Hot Line
•
Timed Reminder
Tone 3
•
•
•
•
After pressing
TRANSFER or
Recall/hookswitch to
hold a call temporarily
(e.g., Call Splitting)
While a called PS is
being searched
When Account Code
Entry is performed
When answering a
Timed Reminder call
with no message
Tone 4
Message waiting indication
was received.
When you make calls
Busy Tone
1s
Reorder Tone
The outside line you tried to
seize is not assigned or
denied.
Ringback Tone 1
Normal ringback tone
User Manual
191
4.3 What is This Tone?
Ringback Tone 2
1s
Special ringback tone for DISA
call
Do Not Disturb (DND)
Tone
The dialled extension is
refusing incoming calls.
While off-hook
Indication Tones
Tone 1
15 s
Call waiting tone
Tone 2
A call is on hold longer than
the specified time
When talking to an outside party
Warning Tone
1s
This tone is sent 15, 10 and 5
seconds before the specified
time for disconnection.
When setting the features or programming
Confirmation Tones
Tone 1
The feature setting was set
successfully.
Tone 2
Before receiving a page
through an external speaker
Tone 3
Before the following features
activate:
•
Retrieving a held call
•
Picking up another
call
•
Paging/Answering a
paging
announcement
•
Answering the call
through a speaker
192
User Manual
1s
4.3 What is This Tone?
Tone 4
1s
Establishing or leaving a
conference
Tone 5
A call has been put on hold.
User Manual
193
4.4 Revision History
4.4
Revision History
4.4.1
KX-TDA100/KX-TDA200 Version 1.1
New Contents
•
1.4.5 Multiple Party Conversation
Adding a Third Party during a Conversation Using the ISDN Service (Three-party
Conference [3PTY]—by ISDN)
•
1.6.3 Making an Announcement and Having a Multiple Party Conversation (Broadcasting)(KXTDA30/KX-TDA100/KX-TDA200 only)
Changed Contents
•
1.1.1 Before Operating the Telephones
When You Use a Panasonic Proprietary Telephone
– FLASH/RECALL
•
1.2.4 When the Dialled Line is Busy or There is No Answer
Leaving a Message Waiting Indication/Calling Back the Caller Who Left an Indication
(Message Waiting)
– To clear message waiting indications left on your extension
•
1.11.1 Using the Call Log
Calling with the Incoming Call Log
Calling with the Outgoing Call Log
•
1.11.2 Using the Directories
Calling with the Directory
Storing Names and Numbers
Entering Characters
194
User Manual
4.4 Revision History
4.4.2
KX-TDA30 Version 1.1
New Contents
•
1.4.5 Multiple Party Conversation
Adding a Third Party during a Conversation Using the ISDN Service (Three-party
Conference [3PTY]—by ISDN)
•
1.6.3 Making an Announcement and Having a Multiple Party Conversation (Broadcasting)(KXTDA30/KX-TDA100/KX-TDA200 only)
Changed Contents
•
1.11.1 Using the Call Log
Calling with the Incoming Call Log
Calling with the Outgoing Call Log
•
1.11.2 Using the Directories
Calling with the Directory
Storing Names and Numbers
Entering Characters
User Manual
195
4.4 Revision History
196
User Manual
Index
User Manual
197
Index
A
Absent Message
85, 155, 184
Accessing External Services (External Feature Access [EFA])
118
Accessing System Features (System Feature Access)
137
Accessing the ISDN Service (ISDN Service Access)
39
Account
19, 163
Account Code Entry
26, 181
Adding a Third Party during a Conversation Using the ISDN Service
(Three-party Conference [3PTY]—by ISDN)
73
Adding Other Parties during a Conversation (Conference)
67
After Moving to a New Location in the Office
125
Alternate Calling—Ring/Voice
40, 189
Alternate Receiving—Ring/Voice
154
Alternating the Calling Method (Alternate Calling—Ring/Voice)
40
Answer
17, 20, 50, 163
Answering a Call from Another Telephone (Call Pickup)
48
Answering a Call Ringing at Another Telephone (Call Pickup)
48
Answering a Call via an External Speaker (Trunk Answer From Any Sta49
tion [TAFAS])
Answering Call Waiting
63
Answering Call Waiting from the Telephone Company
66
Answering Call Waiting in the PBX
63
Answering Calls
46
Answering Hands-free (Hands-free Answerback)
47
Answering/Denying a Paging Announcement
90
Appendix
177
Assigning an Extension PIN to Your Extension (Extension PIN [Personal
150
Identification Number])
AUTO ANS (Auto Answer)/MUTE
16
AUTO DIAL/STORE
15
Automatic Call Hold
59
Automatic Callback Busy
31, 189
Automatic Callback Busy Cancel
32, 182
Automatic Line Access
24, 181
Automatic Redial
30
B
Background Music (BGM)
103, 157, 186
Basic Calling
23
Before Leaving Your Desk
79
Before Operating the Telephones
12
Boss & Secretary feature
79
Broadcasting
91, 185
Busy Station Signalling (BSS) —> Call Waiting
Busy Tone
191
33
C
Call Forwarding (CF)—by ISDN
83, 184
Call Forwarding (FWD)
17, 79
Call Forwarding (FWD)/Do Not Disturb (DND)—Both calls
19, 162
Call Forwarding [FWD] for your Incoming Call Distribution Group
81
Call Forwarding to Voice Mail (Voice Mail Integration)
119
Call Hold
57, 183
Call Hold Retrieve
58, 183
Call Log
19, 163
Call Log for ICD Group
19, 163
Call Monitor
38, 189
Call Park
19, 59, 163, 183
Call Park (Automatic Park Zone)
19, 59, 163, 183
198
User Manual
Call Park Retrieve
60
Call Pickup
48
Call Pickup Deny
48, 183
Call Splitting
61
Call Transfer
53
Call Transfer (CT)—by ISDN
56, 183
Call Waiting
33, 63, 98, 185
Call Waiting from the Telephone Company
183
Call Waiting in the PBX
183
Call Waiting Selection
155
Call Waiting Tone
189
Call Waiting Tone Type Selection
155
Calling an Outside Party
24
Calling Another Extension
23
Calling Line Identification Restriction (CLIR)
20, 101, 153, 164,
186
Calling through DISA
42
Calling with the Incoming Call Log
126
Calling with the Outgoing Call Log
128
Calling without Restrictions
41
Calling/Connected Line Identification Presentation (CLIP/COLP)
99,
153, 185
CANCEL
18
CCBS Cancel
33, 182
Changing Call Charges and Extension Control
167
Changing the Settings of Other Extensions
140
Charge Reference
19, 163
Checking the Time Service Status
105
Clearing Features
160
Clearing Features Set at Your Extension (Extension Feature Clear)
108
CO
15
Completion of Calls to Busy Subscriber (CCBS)
32, 189
Conference
17, 19, 67, 163
Confirmation Tones
192
Connected Line Identification Restriction (COLR)
20, 100, 164,
186
Connection Example
22
Control Features
140
Customised Buttons
18
Customising the Buttons
162
Customising Your Phone & System
149
Customising Your Phone (Personal Programming)
150
Customising Your System (System Programming)
169
D
Data Line Security
104, 186
Date & Time [000]
172
Denying Other People the Possibility of Picking Up Your Calls (Call Pickup Deny)
48
Dial Tone Transfer
143
Dial Tones
190
Direct Inward System Access (DISA)
42
Direct Station Selection (DSS)
19, 162
Directory and Call Log Lock
157
Display
13
Display Backlight Selection
153
Display Language Selection
153
Display Switching Mode
153
Index
Displaying Your Telephone Number on the Called Party and Caller’s
Telephone (Calling/Connected Line Identification Presentation
99
[CLIP/COLP])
DND Override
38, 189
Do Not Disturb (DND)
17, 96, 184
Do Not Disturb (DND) Tone
192
Door Open
117, 187
Doorphone Call
116, 187
During a Conversation
53
Headset Operation
77, 156
HOLD
16
Holding
57
Holding a Call
57
Holding in a System Parking Zone (Call Park)
59
Hot Line
28, 181
How to Follow the Steps
21
Hurry-up
19, 163
Hurry-up Transfer —> Manual Queue Redirection
115
E
I
Easy Dialling
27
Electronic Station Lockout —> Extension Lock
87, 157, 185
ENTER
18
Entering Characters
131
Examples
14
Exclusive Call Hold
57
Executive Busy Override
37, 189
Executive Busy Override Deny
102, 156, 186
Extension Control
140
Extension Feature Clear
108, 186
Extension Lock
157, 185
Extension Name [004]
175
Extension Number [003]
174
Extension PIN (Personal Identification Number)
150, 157, 188
External Background Music (BGM)
144, 188
External Feature Access (EFA)
19, 118, 163, 187
Icon Descriptions
14, 170
Identifying Malicious Calling Parties (Malicious Call Identification
[MCID])
52
If a Doorphone/Door Opener is Connected
116
If a Host PBX is Connected
118
If a Voice Processing System is Connected
119
Incoming Call Distribution Group (ICD Group)
19, 162
Incoming Call Distribution Group Monitor
112, 187
Incoming Call Log
126
Indication Tones
192
INTERCOM
16
Intercom Call
23
ISDN Service
20, 164
ISDN Service Access
39
ISDN-Hold
20, 164
J
F
Feature Highlights
2
Feature Number Table
181
Feature Numbers
12
Fixed Buttons
15
FLASH/RECALL
17
Forced Answerback Selection
155
Forwarding a Waiting Call (Manual Queue Redirection)
115
Forwarding Calls
79
Forwarding Your Calls (Call Forwarding [FWD])
79
Forwarding Your Calls Using ISDN Service (Call Forwarding [CF]—by
83
ISDN)
FWD N/A Timer
156
FWD/DND Cycle Switch Mode
82, 96
FWD/DND Setting Mode
82, 96
FWD/DND—Intercom calls
19, 162
FWD/DND—Outside calls
19, 162
G
Group FWD—Both calls
19, 163
Group FWD—Intercom calls
19, 163
Group FWD—Outside calls
19, 163
Group Paging
88, 185
Group-CO (G-CO)
18, 162
H
Handset/Headset Selection —> Headset Operation
Hands-free Answerback
47
Hands-free operation
76
Headset
20, 164
77, 156
Jog Dial
18
Joining an Existing Call (Executive Busy Override)
37
K
Key Pad Tone Set
156
KX-TDA100/KX-TDA200 Version 1.1
KX-TDA30 Version 1.1
195
194
L
Last Number Redial
30, 181
LCS Mode Set (After Answering)
155
Leaving a Conference (Leaving Three-party Conference)
71
Leaving a Conference (Unattended Conference)
70
Leaving a Message Waiting Indication/Calling Back the Caller Who Left
34
an Indication (Message Waiting)
Leaving an Incoming Call Distribution Group (Log-in/Log-out, Wrap109
up)
Leaving Three-party Conference
71
Letting a Third Party Join Your Call (Privacy Release)
72
Letting Other People Listen to the Conversation (Off-hook Monitor)
76
Live Call Screening
20, 121, 164
Live Call Screening Mode Set
155
Log-in/Log-out
19, 109, 163, 187
Log-in/Log-out for all groups
19, 163
Log-in/Log-out of a specified group
19, 163
Loop-CO (L-CO)
18, 162
M
Making a Call to a Private Network (TIE Line Access)
25
User Manual
199
Index
Making an Announcement and Having a Multiple Party Conversation
91
(Broadcasting)(KX-TDA30/KX-TDA100/KX-TDA200 only)
Making Calls
23
Making/Answering an Announcement
88
Malicious Call Identification (MCID)
52, 183
Manager Operation
139
Manager Password
166
Manager Programming
166, 167
Manual Queue Redirection
115
Message
15, 19, 162
Message for another extension
19, 162
Message Waiting
34, 182, 189
MODE
18
MONITOR
16
Monitoring and Changing the Log-in/Log-out Status of Extensions
113
Monitoring and Controlling the Call Status of an Incoming Call Distribu112
tion Group (Incoming Call Distribution Group Monitor)
Monitoring Another Extension (Call Monitor)
38
Monitoring the Status of Waiting Calls
112
Multiple Party Conversation
67
Mute
75
N
Navigator Key
18
O
Off-hook Call Announcement (OHCA)
98
Off-hook Monitor
76
One-touch Dialling
19, 27, 162
One-touch Dialling Assignment Mode Selection
157
One-touch Transfer
54
One-touch Two-way Transfer
20, 123, 164
Opening a Door (Door Open)
117
Operation
11
Operator Call
24, 181
Outgoing Call Log
128
Outgoing Messages (OGM)
145, 188
Outside Line Group Access
24, 181
P
Paging
88
Paging and then Transferring a Call
88
Paging Deny
90, 156
Parallelled Telephone
106, 154, 186
PAUSE
15
Personal Absent Message
156
Personal Programming
150
Personal Speed Dialling
27, 181
Pickup Dialling —> Hot Line
28, 181
Predialling
25
Preferred Line Assignment—Incoming
154
Preferred Line Assignment—Outgoing
154
Preventing Other People from Joining Your Conversation (Executive
Busy Override Deny)
102
Preventing Other People from Using Your Telephone (Extension
87
Lock)
Preventing Your Number Being Displayed on the Called Party’s Telephone (Calling Line Identification Restriction [CLIR])
101
200
User Manual
Preventing Your Telephone Number Being Displayed on the Caller’s
Telephone (Connected Line Identification Restriction [COLR])
100
Privacy Release
72
PROGRAM
17
Programmable Feature (PF)
18
Programming Information
166, 169
Protecting Your Line against Notification Tones (Data Line Security)
104
Q
Quick Dialling
29
R
Receiving Call Waiting (Call Waiting/Off-hook Call Announcement
98
[OHCA]/Whisper OHCA)
Receiving Calls
46
Recording a Conversation (Two-way Record)
123
Recording Outgoing Messages (OGM)
145
Redial
15, 30
Redialling the Last Number You Dialled (Last Number Redial)
30
Refusing Incoming Calls (Do Not Disturb [DND])
96
Registration for Your Portable Station (PS)
12
Release
18, 20, 50, 164
Remote COS Access
41, 182
Remote Extension Lock
140, 188
Remote Setting
45, 182
Remote Station Lock Control —> Remote Extension Lock
140, 188
Reorder Tone
191
Required Telephone
166, 169
Reserving a Busy Line (Automatic Callback Busy)
31
Restriction Level Control (Dial Tone Transfer)
143
Restrictions
14
Revision History
194
Ring Tones
190
S
Safety Instructions
4
Screening Calls (Live Call Screening [LCS])
121
SELECT
18
Sending a Call Waiting Tone (Call Waiting)
33
Setting Callback on an ISDN Line (Completion of Calls to Busy Subscriber [CCBS])
32
Setting Features
152
Setting the Alarm (Timed Reminder)
94
Setting the Parallelled Telephone to Ring (Parallelled Telephone)
106
Setting the Telephone According to Your Needs
94
Setting Your Telephone from Another Extension or through DISA (Re45
mote Setting)
Settings on the Programming Mode
152
SHIFT
18
Showing a Message on the Caller’s Telephone Display (Absent
85
Message)
Single-CO (S-CO)
19, 162
Soft Buttons
16
SP-PHONE
15
Station Programme Clear —> Extension Feature Clear
108, 186
Station Speed Dialling —> Personal Speed Dialling
27, 181
Index
Storing Names and Numbers
130
System Alarm
19, 163
System Feature Access
137
System Password
169
System Programming
169, 172
System Speed Dialling
28, 181
System Speed Dialling Name [002]
174
System Speed Dialling Number [001]
173
V
T
Walking COS
41
Walking Extension
125, 187
Walking Station —> Walking Extension
125, 187
Warning Tone
192
What is This Tone?
190
What Kind of Telephone Can Be Used?
12
When the Dialled Line is Busy or There is No Answer
31
When You Use a Panasonic Proprietary Telephone
15
Whisper OHCA
98
Wireless XDP Parallel Mode
107, 186
With a One Touch Button (One-touch Dialling)
27
Wrap-up
19, 109, 163
Talking to Two Parties Alternately (Call Splitting)
61
Terminate
19, 163
Three-party Conference [3PTY]—by ISDN
73, 183
TIE Line Access
25, 181
Time Service (Day/Night/Lunch/Break)
20, 105, 141, 163, 188
Time Service Mode Control
141
Time Service Switching Mode (Automatic/Manual)
20, 141, 164
Timed Reminder
94, 185
To Access Another Party Directly from Outside (Direct Inward System
Access [DISA])
42
To select the time service switching mode (Automatic/Manual)
141
To store the caller’s information in personal speed dialling
127, 129
Toll Restriction/Call Barring
20, 164
Tone
13
TRANSFER
16
Transferring a Call (Call Transfer)
53
Transferring a Call Using the ISDN Service (Call Transfer [CT]—by
56
ISDN)
Transferring to an Extension on the PBX
53
Transferring to an Outside Party Using the PBX Service
54
Troubleshooting
178
Trunk Answer From Any Station (TAFAS)
49, 183
Turning on the Background Music (BGM)
103
Turning on the External Background Music (BGM)
144
Two-way Record
20, 123, 164
Two-way Transfer
20, 123, 164
Verified Code Entry
41, 182
VOICE CALL/MUTE
17
Voice Mail Integration
119, 187
Voice Mail Transfer
20, 119, 164
Volume Key
18
W
Y
Your Extension Number
13
U
Unattended Conference
70
Using a Display Proprietary Telephone
126
Using a Navigator Key/Jog Dial/Volume Key
13
Using a Preprogrammed Number (Quick Dialling)
29
Using an Account Code (Account Code Entry)
26
Using Numbers Stored at Your Extension (Personal Speed Dialling)
27
Using Numbers Stored in the PBX (System Speed Dialling)
28
Using the ANSWER/RELEASE Button
50
Using the Directories
130
Using the Headset (Headset Operation)
77
Using the Same Settings as Your Previous Extension (Walking
Extension)
125
Using User-supplied Equipment
116
Using Your Calling Privileges at Another Extension (Remote COS
Access)
41
Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel
107
Mode)
Utilising the Call Centre
109
User Manual
201
Panasonic Communications Co., Ltd.
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
Copyright:
This manual is copyrighted by Panasonic Communications Co., Ltd. (PCC).
You may print out this manual solely for internal use with this model. Except above, you may not reproduce
this manual in any form, in whole or part, without the prior written consent of PCC.
2003 Panasonic Communications Co., Ltd. All Rights Reserved.
PSQX2635VA KK0103EK4074
Download PDF

advertising