Specifications | Ford 2007 Expedition Automobile User Manual

MANUAL
CCD COLOR CAMERA
IK-644A
der
cor
Re
ady
Re
CONTENTS
SECTION 1
GENERAL DESCRIPTION
6.
7.
8.
9.
10.
11.
12.
13.
AUTOMATIC ELECTRONIC SHUTTER (AES) .............
BACKLIGHT COMPENSATION (BLC) .........................
WHITE BALANCE (AWB) ..............................................
LINE-LOCK PHASE ........................................................
DAY / NIGHT FUNCTION ...............................................
NOTES ON USE AND INSTALLATION ........................
IN CASE OF PROBLEMS ..............................................
EXTERIOR VIEW ............................................................
(IK-644A)
1. FEATURES & DESCRIPTION .......................................... 1-8
2. COMPONENTS ................................................................. 1-8
3. PART NAMES & FUNCTIONS ......................................... 1-8
4. CONNECTIONS AND OPERATIONS .............................. 1-9
5. LENS ................................................................................ 1-10
SECTION 5
SPECIFICATIONS
1. SPECIFICATIONS ............................................................. 5-1
1-10
1-10
1-11
1-11
1-11
1-11
1-12
1-12
(IK-644A)
1-7
1. Read Instructions
All the safety and operating instructions should be
read before the product is operated.
2. Retain Instructions
The safety instructions and instruction manual
should be retained for future reference.
3. Heed Warnings
All warnings on the product and in the instruction
manual should be adhered to.
4. Follow Instructions
All operating and use instructions should be
followed.
5. Cleaning
Disconnect this video product from the power
supply before cleaning.
6. Attachments
Do not use attachments not recommended by the
video product manufacturer as they may cause
hazards.
7. Water and Moisture
Do not use this video product near water-for
example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a
swimming pool and the like.
8. Accessories
Do not place this video product on an unstable cart,
stand, tripod, bracket or table. The video product
may fall, causing serious injury to a child or adult,
and serious damage to the product. Use only with
stand, tripod, bracket, or table recommended by
the manufacturer, or sold with the video product.
Any mounting of the product should follow the
manufacturer's instructions, and should use a
mounting accessory recommended by the
manufacturer.
9. Ventilation
This video product should never be placed near or
over a radiator or heat register. This video product
should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have
been adhered to.
10. Power Sources
This video product should be operated only from
the type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your location, consult your product dealer.
11. Power-Cord Protection
Power-Supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, screws and the point
where they exit from the product.
12. Lightning
For added protection for this video product during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the power supply and
cable system. This will prevent damage to the
video product due to lightning and power-line
surges.
13. Overloading
Do not overload power supply and extension cords
as this can result in a risk of fire or electric shock.
14. Object and Liquid Entry
Never push objects of any kind into this video
product through openings as they may touch
dangerous voltage points or short-out parts that
could result in a fire or electrical shock. Never spill
liquid of kind on the video product.
15. Servicing
Do not attempt to service this video product
yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
16. Damage Requiring service
Disconnect this video product from the power
supply and refer servicing to qualified service
personnel under the following conditions.
a. when the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen
into the video product.
c. If the video product has been exposed to rain or
water.
d. If the video product does not operate normally
by following the operating instructions in the
instruction manual. Adjust only those controls that
are covered by the instruction manual as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the video product to
its normal operation.
e. If the video product has been dropped or the
cabinet has been damaged.
f. When the video product exhibits a distinct
change in performance-this indicates a need for
service.
17. Replacement Parts
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer with the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or
other hazards.
18. Safety Check
Upon completion of any service or repairs to this
video product, ask the service technician to
perform safety checks to determine that the video
product is in proper operating condition.
The lightening flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated "dangerous
voltage" within the product's enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses , and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipmetn in a
residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
USER-INSTALLER CAUTION : Your authority to operate this FCC verified equipment
could be voided if you make changes or modifications not expressly approved by the party
1-8
1. IK-629A has following functions.
(1) Since this cameras uses AC 24V ~ / DC 12V ---, it can be installed
and built into system easily.
(2) This camera turns color by day to black and white by night
automatically. (DAY/NIGHT function)
(3) Camera synchronization mode is selectable between internal and linelock.
(4) This camera adjusts shutter speed according to the subject brightness
automatically. (AES)
(5) BLC is effective when a strong light enters and auto-iris lens closes.
(6) The white balance is automatically adjusted corresponding to the color
temperature variations (AWB)
(7) Easy back focus adjustment makes for easy installations.
2. Built - in 1/3 inch high - vesolation CCD
3. Minimum illumination of 0.3 lux at F1.2.
4. S/N ratio of 50dB.
5. Horizontal resolution of 350 TV lines.
1-9
1-10
1-11
1-12
SECTION 5
SPECIFICATIONS
1. SPECIFICAIONS
Power
– ±10%
AC 24V ~ ±10% 60Hz / DC 12V ...
Power consumption
IK-629A, IK-644A: 4.0w (max) with AI lens
IK-645A:
4.5w (max) with AI lens
Image sensor
1/3 inch CCD image area sensor
Image pickup area
4.96mm (0.195inch) horizontal x 6.0mm
(0.236inch) vertical (1/3inch type)
Effective picture element
IK-629A:
510 horizontal x 492 vertical
IK-644A, IK-645A: 768 horizontal x 494 vertical
Scanning system
2 : 1 interlace NTSC Standard TV system
Scanning frequency
15.75kHz horizontal 60Hz vertical
Synchronization
Line-Lock, Internal manually switchable
Resolution
IK-629A:
Minimum illuminance of subject
IK-629A: 0.2 Lux (F1.2, More than 10% of image output C = 0.45)
IK-644A: 0.2 Lux (F1.0, More than 10% of image output C = 0.45)
IK-645A: 0.2 Lux (F1.2, AGC WIDE, More than 10% of image output C = 0.45)
S/N
50 dB or more (AGC off, weight ON)
Video output
VBS 1.0V p-p / 75 ohms, composite
Output impedance
759 unbalanced
White balance
IK-629A, IK-644A: Automatic (2500.K to 10,000.K)
IK-645A:
Automatic (2500.K to 10,000.K), PRESET, MANUAL
Iris control
Video Out / Iris Driver Circuit Built in
Gain control
IK-629A, IK-644A: Average AGC, (24dB)
IK-645A:
Average AGC, On (24dB), Wide (30dB), OFF
Backlight compensation
IK-629A, IK-644A: Manual ON/OFF switching, center-bottom zone light measuring
system
IK-645A:
4 modes BLC function for different application
Lens mount
CS mount
Ambient temperature
–10°C to + 50°C (14°F to 122°F)
Ambient humidity
30% to 90%
Weight
IK-629A, IK-644A: 450g
IK-645A:
500g
External dimensions
2.74(W) x 1.97(H) x 4.56(D) inches (63x50x116mm)
Automatic electronic shutter
ON (1/60s to 1/100000) / OFF (1/60s)
Horizontal
Vertical
IK-644A, IK-645A: Horizontal
Vertical
350 TV lines or more
350 TV lines or more
480 TV lines or more
350 TV lines or more
Download PDF

advertising