Use & care guide | Frigidaire 134683400 Washer User Manual

TUMBLE ACTION WASHER
Use & Care Guide
Machine à laver par culbutage
Guide de L’utilisateur
Table of Contents
The symbol
on the product or on its packaging indicates that
this product may not be treated as household waste. Instead it shall
be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of this
product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Read
all
instructions
before
using this appliance. This book contains
valuable information about
Operation
Care
Service
Keep it in a safe place.
Lisez ce manuel en entier avant de vous
servir de cet appareil.Ce manuel renferme
de précieuses informations sur
le fonctionnement
l’entretien
le service après-vente
Conserver en lieu sûr.
Le symbole
sur le produit ou son emballage indique que ce produit
ne peut être traité comme déchet ménager. Il doit être remis au point de
collecte dédié à cet effet (collecte et recyclage du matériel électrique et
électronique). En procédant à la mise à la casse réglementaire de
l'appareil, nous préservons l'environnement et notre sécurité, s'assurant
ainsi que le déchets seront traités dans des conditions appropriées. Pour
obtenir plus de détails sur le recyclage de ce produit, veuillez prendre
contact avec les services de votre commune ou le magasin où vous avez
effectué l’achat.
Read and Save These Instructions
Record Your Model and Serial Numbers
The model and serial numbers of your washer are found on the washer serial
plate located at the top, inside of the door opening. Record and retain these
numbers.
Lire et conserver ces instructions
Noter les numéros de modèle et de série
Les numéros de modèle et de série de la laveuse se trouvent sur la plaque
signalétique à dans la partie supérieure à l’intérieur de l’ouverture de la
porte. Noter et conserver ces numéros.
Model Number
N° de modèle
Serial Number
N° de série
Purchase Date
Date de l’achat
www.frigidaire.com
1
P/N 134683400 (0512)
ENGLISHENGLISH
IMPORTANT SAFETY INSTRUCTIONS ..........................2-3
Washing Procedures ......................................................3-4
Stain Removal ................................................................... 5
Common Washing Problems ....................................... 6
Care and Cleaning ............................................................7
Avoid Service Checklist .....................................................8
Français..........................................................................9-16
Consignes de sécurité importantes...................................9
Instructions de lavage............................................... 10-12
Détachage ..................................................................12-13
Problèmes de lessive courants.........................................14
Entretien et nettoyage ....................................................15
Guide de dépannage ......................................................16
This Use and Care Guide provides
general operating instructions for
your washer. It also contains
information about features for
several other models. Your washer
may not have every feature
included here.
Use the washer only as instructed
in this Use and Care Guide and the
Operating Instructions included
with your washer.
Your safety and the safety of others is very
important.
We have provided many important safety
messages in the Use and Care Guide, Operating
Instructions, Installation Instructions and on your
appliance. Always read and obey all safety
messages.
DANGER You will be killed or seriously injured if
you don't follow instructions.
You can be killed or seriously injured if
you don't follow instructions.
All safety messages will identify the hazard, tell
you how to reduce the chance of injury, and tell
you what can happen if the instructions are not
This is the safety alert symbol. This symbol alerts
you to hazards that can kill or hurt you or others. followed.
All safety messages will be preceded by the safety
alert symbol and the word "DANGER" or
"WARNING". These words mean:
Pedestal
A pedestal accessory, Model No. NLPWD15, specifically designed for this washer may be used when elevating the washer for ease of use. Failure to
use accessories certified by the manufacturer could result in personal injury, property damage or damage to the washer.
Important Safety Instructions
SAVE THESE INSTRUCTIONS
Read all instructions before using this washer.
To reduce the risk of fire, electrical shock, or injury to persons when using this washer, comply with the basic warnings listed
below.
Failure to comply with these warnings could result in serious personal injuries.
Prevent Fire
Do not wash items that have been previously cleaned in, soaked in, or spotted with gasoline, cleaning solvents, kerosene,
cooking oils, waxes, etc. Do not store these items on or near the washer. These substances give off vapors or chemical reactions that
could ignite or explode.
Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors that could ignite the
materials.
Do not add gasoline, cleaning solvents, or other flammable or explosive substances to the wash water. These substances
give off vapors that could ignite or explode.
Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more.
HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washer, turn on all
hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. Hydrogen gas
is flammable; do not smoke or use an open flame during this time.
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
Failure to comply with these warnings could result in fire, explosion, serious bodily injury and/or damage to the rubber or plastic
parts of the washer.
Protect Children
Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near
children. As children grow, teach them the proper, safe use of all appliances.
Destroy the carton, plastic bag and other packing materials after the washer is unpacked. Children might use them for play.
Cartons covered with rugs, bedspreads or plastic sheets can become airtight chambers.
Keep laundry products out of children's reach. To prevent personal injury, observe all warnings on product labels.
Before the washer is removed from service or discarded, remove the washer door to prevent accidental entrapment.
Failure to comply with these warnings could result in serious personal injuries.
Prevent Injury
To prevent shock hazard and assure stability during operation, the washer must be installed and electrically grounded by a
qualified service person in accordance with local codes. Installation instructions are packed in the washer for installer's reference. Refer
to INSTALLATION INSTRUCTIONS for detailed grounding procedures. If the washer is moved to a new location, have it checked and
reinstalled by a qualified service person.
To prevent personal injury or damage to the washer, the electrical power cord of the washer must be plugged into a
properly grounded and polarized 3-prong outlet. The third grounding prong must never be removed. Never ground the washer
to a gas pipe. Do not use an extension cord or an adaptor plug.
Follow package directions when using laundry products. Incorrect usage can produce poisonous gas--resulting in serious
injury or death.
• Do not combine laundry products for use in 1 load unless specified on the label.
•
Do not mix chlorine bleach with ammonia or acids such as vinegar.
To prevent serious personal injury and damage to the washer:
• All repairs and servicing must be performed by an authorized servicer unless specifically recommended in this Owner's
Guide. Use only authorized factory parts.
• Do not tamper with controls.
• Do not install or store the washer where it will be exposed to the weather.
• Do not install on carpet. Install washer on a solid floor. It may be necessary to reinforce the floor to prevent vibration or
movement.
To reduce the risk of electric shock, disconnect this appliance from the power supply before attempting any user
maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply.
To prevent injury, do not reach into the washer while parts are moving. Before loading, unloading or adding items, push in
the cycle selector knob and allow the drum to coast to a complete stop before reaching inside.
Failure to comply with these warnings could result in serious personal injuries.
This washer is equipped with an electrical overload protector. The motor will stop if it becomes overheated. The washer will
automatically restart after a cool down period of up to 30 minutes, if the washer has not been manually turned off during this time.
2
Printed in U.S.A.
Important Safety Instructions (continued)
Grounding type
Avoid fire hazard or wall receptacle
electrical shock. Do not use an
adaptor plug or extension cord or
remove grounding prong from
electrical power cord. Failure to
follow this warning can cause
serious injury, fire or death.
Do not under any
circumstances, cut,
remove, or bypass the
grounding prong from
this plug.
CORRECT
Use this way ONLY
Do not use or mix
liquid chlorine bleach with other
household chemicals such as toilet
cleaners, rust removers, acid or
products containing ammonia. These
mixtures can produce dangerous
fumes which can cause serious injury
or death.
Washing Procedures
Power supply cord with 3-prong
grounding plug
Note: The instructions appearing in
this Owner's Guide are not meant to
cover every possible condition and
situation that may occur. Common
sense and caution must be practiced
when installing, operating and
maintaining any appliance.
Follow the guidelines below for preparing the wash load.
•
Read the Operating Instructions for operating your specific model.
•
Always read and follow fabric care and laundry product labels.
To reduce the risk of fire, electrical shock, or injury to persons, read Important
Safety Instructions before operating this washer.
1.
Sort laundry into loads that can be washed together.
Sort items by recommended water temperatures and wash time.
•
Separate white, light, and colorfast items from dark and noncolorfast items.
•
Separate items which shed lint from items which attract lint. Permanent press,
synthetic, knit and corduroy items will pick up lint from towels, rugs and chenille
bedspreads.
•
Separate heavily soiled items from lightly soiled items.
•
Separate lacy, sheer and loosely knit items from sturdy items.
•
Do not machine wash items containing fiberglass. Small particles of fiberglass left in
the drum may stick to fabrics in other loads and cause skin irritation.
2.
Prepare items for washing.
•
Empty pockets.
•
Brush off lint and dirt. Shake out rugs and beach towels.
•
Close zippers, fasten hooks, tie strings and sashes, and remove nonwashable trims and
ornaments.
•
Remove pins, decorative buttons, belt buckles, and other objects which could be
damaged. This also helps protect other items in the wash load.
•
Mend rips and tears to prevent further damage during washing.
•
Place delicate items such as bras, shoulder pads, hosiery, and belts in a mesh bag to
prevent tangling during the wash cycle.
•
Turn knit items inside out to prevent pilling.
3.
Pretreat stains and heavy soil.
See Stain Removal for details.
4.
Add laundry load to washer.
•
Combine large and small items in a load. Load large items first. Large items should not
be more than half the total wash load.
Sort laundry into loads that can be washed
together.
Empty pockets.
Place delicate items in a mesh bag.
•
Washing single items such as a sweater, towel or jeans may cause an out-of-balance
load. Add 1 or 2 similar items to help balance the load.
•
Single heavy items such as a bedspread can be washed separately.
•
5.
Add laundry load to washer.
The washer can be fully loaded, but the items should not be tightly packed. The door
should close easily.
Add detergent, bleach and fabric softener to automatic dispenser following
these steps:
A. OPENING AND CLOSING THE DISPENSER DRAWER
• Slowly open the dispenser drawer by first sliding the safety latch to the right,
then pulling the drawer out until it stops.
• After adding laundry products, slowly close the dispenser drawer. Closing the
drawer too quickly could result in early dispensing of bleach or fabric softener.
3
ENGLISH
•
B.
DETERGENT
• Detergent is flushed from the dispenser at
the beginning of the cycle. Either powdered
or liquid detergent can be used. Note:
Liquid detergent will drain into the washer
drum as it is added.
• Add a low-sudsing, high-efficiency
detergent made for front-loading washers
to the dispenser chamber. Look
for this symbol on the detergent
label. Use the cap or scoop
provided bythe detergent manufacturer to measure the amount recommended.
• Color-safe bleach, water conditioner, detergent booster and enzyme products may be added to the detergent compartment.
Avoid mixing liquids and powders.
• Detergent usage may need to be adjusted for water temperature, water hardness, load size and soil level.
• For best results, avoid oversudsing.
C. LIQUID BLEACH
• If desired, measure out the
recommended amount of liquid chlorine
bleach (not to exceed 1/3 cup (80 mL))
and pour it into the center compartment
labeled "Liquid Bleach" and marked
with this symbol
.
• Fill to the mininum fill line (MIN.)for
small loads. Fill to the maximum fill line
(MAX.) for large loads. Do not exceed
the maximum fill line. Overfilling can
cause early dispensing of the bleach
which could result in damaged clothes.
• Do not pour undiluted liquid chlorine bleach directly onto the load or into the drum. Fabric damage can occur.
• Add powder or liquid color-safe bleach to the detergent dispenser.
D. FABRIC SOFTENER
• If desired, pour the recommended amount of fabric softener into the compartment labeled "Fabric Softener" and marked with
this symbol
.
• Fill to the mininum fill line (MIN.) for small loads. Fill to the maximum fill line (MAX.) for large loads. Do not exceed the maximum
fill line. Overfilling can cause early dispensing of the fabric softener which could result in stained clothes.
• Do not pour fabric softener directly on the wash load.
• Use of a fabric softener dispensing ball is not recommended in tumble action washers.
6.
Select the cycle, temperature, spin speed, options and features according to type, size, and soil level of each load. Start the
washer. (See Operating Instructions for your specific model.)
7. Remove items when the cycle is completed.
Place washed items in automatic dryer, line dry, or dry flat as directed by fabric care label. Excess
wrinkling, color transfer or odors may develop in items left in the washer after the cycle has
ended.
8. General Precautions
• If the dispenser drawer is opened during operation, the washer will shut off. Slowly
close the dispenser drawer, and press START to continue cycle.
• Do not slam the washer door closed or try to force the door open when DOOR LOCK
light is on. This could result in damage to the washer.
• DO NOT leave the washer door open. An open door could entice children to hang on the
door or crawl inside the washer. Note: If there are no small children present, leave the door
ajar to prevent odor build up and to improve venting of the unit.
• To avoid damaging the washer and personal injury, DO NOT hang on or lean against the
washer door.
• Do not place detergent, bleach or fabric softener containers on top of the washer. They can
damage the finish or controls.
Do not store or place laundry products
on top of washer at any time. They
can damage the finish or controls.
Note: From time to time you may see
water in the bleach and fabric softener
compartments. This is a result of the
siphoning action and is part of the
normal operation of the washer.
4
®
As an ENERGY STAR
Partner, Electrolux Home
Products has determined
that this product meets the
®
ENERGY STAR
guidelines
ENERGY STAR for energy efficiency.
Do not use or mix liquid chlorine
bleach with other household chemicals such as
toilet cleaners, rust removers, acid or products
containing ammonia. These mixtures can
produce dangerous fumes which can cause
serious injury or death.
Stain Removal
Safe Stain Removal Procedures
To reduce the risk of fire or serious injury to persons or property, comply
with the basic warnings listed below:
• Read and comply with all instructions on stain removal products.
• Keep stain removal products in their original labeled containers and out of children's
reach.
• Thoroughly wash any utensil used.
• Do not combine stain removal products, especially ammonia and chlorine bleach.
Dangerous fumes may result.
• Never wash items which have been previously cleaned in, washed in, soaked in or
spotted with gasoline, dry cleaning solvents or other flammable or explosive substances
because they give off vapors that could ignite or explode.
Stain Removal
STAIN
TREATMENT
Adhesive tape, chewing gum,
rubber cement
Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or
nonflammable dry cleaning fluid.
Baby formula, dairy products,
egg
Use product containing enzymes to pretreat or soak stains. Soak for 30 minutes or more. Wash.
Beverages (coffee, tea, soda,
juice, alcoholic beverages)
Pretreat stain. Wash using cold water and bleach safe for fabric.
Blood
Rinse with cold water. Rub with bar soap. Or, pretreat or soak with product containing enzymes. Wash using
bleach safe for fabric.
Candle wax, crayon
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is
absorbed. Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable
dry cleaning fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Chocolate
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Collar or cuff soil, cosmetics
Pretreat with prewash stain remover or rub with bar soap.
Dye transfer on white fabric
Use packaged color remover. Wash using bleach safe for fabric.
Grass
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Grease, oil, tar (butter, fats,
salad dressing, cooking oils,
car grease, motor oils)
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse thoroughly. Wash
using hottest water safe for fabric.
Ink
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.
Mildew, scorch
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badly
mildewed fabrics may be permanently damaged.
Mud
Brush off dry mud. Pretreat or soak with product containing enzymes.
Mustard, tomato
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
Nail polish
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
Paint, varnish
WATER BASED: Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed. OIL
BASED AND VARNISH: Use solvent recommended on can label. Rinse thoroughly before washing.
Perspiration
Use prewash stain remover or rub with bar soap. Rinse. Wash using nonchlorine bleach in hottest water safe for
fabric.
Rust, brown or yellow
discoloration
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
Shoe polish
LIQUID: Pretreat with a paste of granular detergent and water. PASTE: Scrape residue from fabric. Pretreat
with prewash stain remover or nonflammable dry cleaning fluid. Rinse. Rub detergent into dampened area.
Wash using bleach safe for fabric.
Urine, vomit, mucus, feces
Pretreat or soak in product containing enzymes. Wash using bleach safe for fabric.
5
ENGLISH
Follow fabric care label instructions.
• Never use highly flammable solvents, such as gasoline, inside the home. Vapors can
explode on contact with flames or sparks.
For successful stain removal:
•
Remove stains promptly.
•
Determine the kind of stain, then follow the recommended treatment in the stain
removal chart below.
•
To pretreat stains, use a prewash product, liquid detergent, or a paste made from
granular detergent and water.
•
Use cold water on unknown stains because hot water can set stains.
•
Check care label instructions for treatments to avoid on specific fabrics.
•
Check for colorfastness by testing stain remover on an inside seam.
•
Rinse and wash items after stain removal.
Common Washing Problems
Many washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. For
satisfactory washing results, follow these suggestions provided by The Soap and Detergent Association.
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
PREVENTIVE MEASURES
Blue stains
•Undiluted liquid detergent or
fabric softener dispensed directly
onto fabric.
•If caused by detergent, mix 1 cup (240
ml) white vinegar with 1 quart (.95 L)
water in a plastic container. Soak item 1
hour. Rinse.
•If caused by fabric softener, rub stains
with bar soap. Wash.
•Avoid overfilling detergent and fabric
softener compartments of dispenser.
Discoloration,
graying
•Not enough detergent.
•Wash water temperature too low.
•Incorrect sorting.
•Rewash with correct amount of
detergent and hottest water safe for
fabric. Add bleach safe for fabric.
•Sort items by soil level and color.
•Use correct amount of detergent, hottest
water and bleach safe for fabric.
Greasy, oily stains •Not enough detergent.
•Undiluted liquid fabric softener
poured directly on fabric.
•Treat with prewash stain remover or
liquid detergent.
•Increase detergent and water
temperature. Rewash.
•Rub fabric softener stains with bar soap.
•Use correct amount of detergent and
hottest water safe for fabric.
•Do not pour liquid fabric softener directly on
fabric. See Washing Procedures for
directions on adding softener.
Holes, tears, or
snags
•Incorrect use of chlorine bleach.
•Unfastened zippers, hooks,
buckles.
•Rips, tears and broken threads.
•Overloading the washer.
•Degradation of fabric.
•May be irreversible if rips, tears and
seams cannot be mended.
•Never pour chlorine bleach directly on
fabric.
•Check condition of items before washing.
See Washing Procedures for preparing
and loading the wash load and adding
chlorine bleach.
Lint
•Incorrect sorting.
•Tissues left in pocket.
•Overloading the washer.
•Not enough detergent.
•Undissolved detergent has left
a residue resembling lint.
•Static cling is attracting lint.
•Load washed too long.
•Reduce load size. Rewash using correct
water temperature, water level, and
amount of detergent.
•Add nonprecipitating water conditioner
to wash water to remove detergent
residue.
•Add liquid fabric softener to final rinse.
•Dry load in dryer.
•Remove lint with lint brush or roller.
•See Washing Procedures for sorting and
preparing the wash load.
•Do not overload washer.
•Use correct temperature and amount of
detergent, water and wash time.
Pilling
(Fibers break off,
ball up and cling to
fabric.)
•Pilling is normal with synthetic
and permanent press fabrics.
This is due to abrasion from
normal wear.
• Use a lint brush or shaver to remove
pills.
•Use fabric softener in the washer to
lubricate fibers.
•When ironing, use spray starch or fabric
finish on collars and cuffs.
•Turn items inside out to reduce abrasion.
Residue or
powder on dark
items;
Stiff, harsh
fabrics.
•Undissolved detergent.
• Some nonphosphate granular
detergents can combine with
hard water minerals to form a
residue.
•Overloading the washer.
• Rewash load.
•Increase water temperature using hottest
water safe for fabric.
•Do not overload washer.
•Use liquid detergent or use nonprecipitating
water conditioner with nonphosphate
granular detergent.
Wrinkling
•Overloading the washer.
•Incorrect wash cycle for wash
load.
•Reduce load size.
•Rinse in cold water with liquid fabric
softener using the Perm Press or Delicate
cycle.
•Do not overload washer.
•Remove items from washer as soon as
cycle is completed.
•Use liquid fabric softener.
•Soak in detergent booster or product
containing enzymes.
•Wash in hot water (120°F/49°C) using full
permanent press cycle. Increase
detergent.
Add bleach safe for fabric.
•Or, treat with color remover.
•Select correct wash cycle.
•Use correct amount of detergent.
•Wash synthetics frequently using hot or
warm water.
Yellow buildup of •Agitation time too short.
•Wash water temperature too low.
body soil on
synthetic fabrics •Not enough detergent.
Yellow or brown
rust stains
•Iron or manganese in water
supply, water pipes, or water
heater.
•To restore discolored load of whites, use
•Use nonprecipitating water softener.
rust remover safe for fabric.
•Before washing, run hot water for a few
•Do not use chlorine bleach to remove rust
minutes to clear lines.
stains. It may intensify discoloration.
•Drain water heater occasionally.
•For an ongoing problem, install an iron filter
in your water supply system.
6
Care and Cleaning
Outside
•
When washing is completed, wipe top and sides of washer with a damp cloth. Turn water
faucets off to prevent pressure build-up in the hoses.
•
As needed, clean the cabinet with mild soap and water. Never use harsh, gritty or
abrasive cleansers. If door or console becomes stained, clean with diluted chlorine bleach
[1/2 cup (120 ml) in 1 quart (.95 L) water]. Rinse several times with clear water.
•
Remove glue residue from tape or labels with a mixture of warm water and mild detergent.
Or, touch residue with the sticky side of the tape or label.
•
Before moving the washer, place a strip of cardboard or thin fiberboard under the front
leveling legs to prevent floor damage.
Figure 1
(Lock tab is visible only after drawer has
been pulled out)
•
Remove the drawer by first sliding the safety latch to the right, then pulling the drawer out
until it stops. (Figure 1)
•
Reach back into the left rear corner of the drawer cavity and press down firmly on the lock
tab (left rear portion of the drawer). Pull out the drawer. (Figure 2)
•
Remove the insert from the bleach and fabric softener compartments. (Figure 3)
•
Rinse the drawer and inserts with hot tap water to remove traces of accumulated powders
and liquids. Large amounts of fabric softener residue may indicate improper dilution or
more frequent cleaning is required.
•
To clean the drawer opening, use a small brush to clean the recess. Remove all residue
from the upper and lower parts of the recess. (Figure 4)
•
Replace the insert pressing the "X" to lock it in place. Return the dispenser drawer.
Inside
•
Remove items from the washer as soon as the cycle ends. Excess wrinkling, color transfer,
and odors may develop in items left in the washer.
Figure 3
Figure 4
Follow Winterizing
Instructions for cold
weather care.
•
Before cleaning the washer interior, unplug the electrical power cord to avoid electrical
shock hazards.
•
Dry around the washer door opening, flexible gasket, and door glass. These areas should
always be clean to ensure a water tight seal.
•
When extremely soiled items have been washed, a dirty residue may remain on the drum.
Remove this by wiping the drum with a nonabrasive household cleanser. Rinse thoroughly
with water.
•
Periodically, wipe dry the folds in the bottom of the flexible gasket to remove lint and other
debris.
•
The plastic drum vanes may become stained from fabric dye. Clean these parts with a
nonabrasive household cleanser. This prevents dye transfer to future loads.
Winterizing Instructions
If the washer is stored in an area where freezing can occur or moved in freezing temperatures,
follow these winterizing instructions to prevent damage to the washer:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Turn off water supply faucets.
Disconnect hoses from water supply and drain water from hoses.
Plug electrical cord into a properly grounded electrical outlet.
Add 1 gallon (3.8 L) nontoxic recreational vehicle (RV) antifreeze to empty wash drum.
Close door.
Select the Drain/Spin cycle. Press START and let the washer drain for 1 minute to drain
out all the water. Not all of the RV antifreeze will be expelled.
Press Pause/Cancel twice, unplug electrical power cord, dry off drum interior and close
door.
Remove dispenser drawer. Drain any water in compartments and dry compartments.
Replace drawer.
Store washer in an upright position.
To remove antifreeze from washer after storage, run empty washer through a complete
cycle using detergent. Do not add wash load.
7
ENGLISH
Figure 2
Cleaning the Dispenser Drawer Area
Detergent and fabric softener may build up in the dispenser drawer. Residue should be removed
once or twice a month.
Avoid Service Checklist
Before calling for service, review this list. It may save both time and expense. The list includes common concerns that are not the result of defective
workmanship or materials in this washer.
OCCURRENCE
POSSIBLE CAUSE / SOLUTION
NOISE
High pitch "jet engine" noise.
• A certain amount of motor whine is normal during the spin cycle.
Rattling and clanking noise.
• Foreign objects such as coins or safety pins may be in drum or pump. Stop washer and check
drum. If noise continues after washer is restarted, objects may be in pump. Call your
authorized servicer.
• Belt buckles and metal fasteners are hitting wash drum. To prevent unnecessary noise and
damage to drum, fasten fasteners and turn items inside out.
Squealing sound or hot rubber odor.
• Washer is overloaded. Do not overload washer. Stop washer and reduce load.
Thumping sound.
• Heavy wash loads may produce a thumping sound. This is usually normal. If sound continues,
washer is probably out of balance. Stop washer and redistribute wash load.
Vibrating noise.
• Washer is not resting firmly on floor. Move washer so it rests firmly on floor. Adjust leveling
legs and tighten lock nuts. See INSTALLATION INSTRUCTIONS for details.
• Shipping bolts and foam block have not been removed during installation. See INSTALLATION
INSTRUCTIONS for removing shipping bolts and foam block.
• Wash load unevenly distributed in drum. Stop washer and rearrange wash load.
OPERATING
Washer does not start.
• Electrical power cord may not be plugged in or connection may be loose. Make sure plug fits tightly
in wall outlet.
• House fuse blown, circuit breaker tripped, or a power outage has occurred. Reset circuit breaker
or replace fuse. Do not increase fuse capacity. If problem is a circuit overload, have it corrected by
a qualified electrician. If problem is a power outage, call local electric company.
• Water supply faucets are not turned on. Turn on water supply faucets.
• Motor is overheated. Washer motor will stop if it becomes overheated. It will automatically restart
after a cool down period of up to 30 minutes (if washer has not been manually turned off).
.
• Washer door is not completely closed. Close door completely.
Washer won't spin.
• Load is too small. Add 1 or 2 similar items to help balance the load.
.
Residue left in drum.
• Heavily soiled items. Wipe drum with a nonabrasive household cleanser, then rinse. Shake or brush
excess dirt and sand from items before washing
WATER
Water collects in folds of the
bellows at the end of the cycle.
• This is a result of the washing action and is part of the normal operation of the washer.
Water collects in bleach and fabric softener
compartments.
• This is a result of the siphoning action and is part of the normal operation of the washer. Water
may be removed by removing the dispenser drawer (see Page 7, Figures 1 and 2) and draining
water into the empty drum or sink.
Wash load too wet after spin.
• Washer is overloaded. Do not overload washer. See Washing Procedures.
• Load is too small. Add 1 or 2 similar items to help balance the load.
• Load is out of balance. Rearrange load to allow proper spinning.
• Drain hose is kinked. Straighten drain hose.
Water does not enter washer or it enters
slowly.
• Water supply is not adequate in area. Check another faucet in the house. Wait until water supply
and pressure increase.
• Water supply faucets are not completely open. Fully open hot and cold faucets.
• Water is being used elsewhere in the house. Water pressure must be at least 30 psi (260 kPa).
Avoid running water elsewhere while washer is filling.
• Water inlet hoses are kinked. Straighten hoses.
Warm or hot water is not hot enough.
• Hot water heater is set too low or is a distance from washer. Measure hot water temperature at
nearby faucet with candy or meat thermometer. Water temperature should be at least 120°F
(49°C). Adjust water heater as necessary.
• Hot water is being used elsewhere in the house. Avoid using hot water elsewhere before or during
washer use. There may not be enough hot water available for proper cleaning. If problem persists,
your hot water system may be unable to support more than 1 use at a time.
Water in washer does not drain or drains
slowly.
• Drain hose is kinked or clogged. Clean and straighten the drain hose.
• Maximum standpipe height is 8' (2.4 m).
• House drain pipes are clogged. Unclog drain pipes. Contact plumber if necessary.
Water leaks.
• Fill hose connection is loose at faucet or washer. Check and tighten hose connections. Install rubber
sealing washers provided.
Oversudsing.
• Wrong detergent. Run rinse cycle. Use a low-sudsing, high efficiency detergent.
• Too much detergent. Run rinse cycle. Use less detergent in future loads
Incorrect wash and rinse temperatures.
• Hot and cold water hoses are connected to wrong supply faucets. Connect hot water hose to hot
water faucet and cold water hose to cold water faucet.
Water is entering washer but tub does not
fill.
• Drain hose standpipe is incorrect height. Standpipe must be a minimum of 23.6" (60 cm) high to
prevent siphoning. See INSTALLATION INSTRUCTIONS.
8
Download PDF

advertising