Frigidaire 316417114 Range User Manual

All about the
Use & Care
of your
Gas Range
TA B L E O F C O N T E N T S
Important Safety Instructions ........................... 3-6
Setting Oven Controls .................................. 13-23
Features at a Glance ......................................... 7
Self-Cleaning ..............................................24-25
Before Setting Oven Controls ........................... 8-9
Care & Cleaning (EC/SD) .............................. 26-28
Before Setting Surface Controls ........................ 10
Before You Call ............................................ 29-30
Setting Surface Controls ................................... 11
Major Appliance Warranty ................................ 31
www.frigidaire.com USA 1-800-944-9044
www.frigidaire.ca
Canada 1-800-265-8352
316901300 (May 2009)
Oven Control Functions (540) ............................ 12
PRODUCT RECORD AND REGISTRATION
Contents
Thank you for choosing Frigidare.
Product Registration ...................................................... 2
Important Safety Instructions ............................ 3-6
Features at a Glance .............................................. 7
Before Setting Oven Controls ............................... 8-9
Removing, replacing & arranging the oven racks ........... 8
Effortless™ Oven Rack system and assembly ................ 9
Before Setting Surface Controls ............................ 10
Cookware material types .......................................... 10
Setting Surface Controls ....................................... 11
Setting a surface burner ........................................... 11
Seasoning, using and caring for the griddle ................ 11
Home canning ......................................................... 11
Oven Controls Functions ........................................ 12
Setting Oven Controls ...................................... 13-23
Setting the clock ...................................................... 13
Changing between continuous bake or 6-Hour
Energy Saving features ............................................ 13
Setting 12 or 24 hour display modes .......................... 13
Changing oven temperature display (F° or C°) ............ 13
Setting a silent control panel..................................... 14
Setting oven lockout ................................................. 14
Setting minute timer ................................................ 14
Add a minute feature ............................................... 14
Setting quick preheat ............................................... 15
Setting bake ........................................................... 15
Setting bake time .................................................... 15
Seting delayed timed bake ....................................... 16
Setting convect bake ................................................ 17
Setting convect roast ............................................... 17
Setting convect convert ............................................ 18
Setting broil ............................................................ 19
Setting pizza feature ................................................ 20
Setting chicken nuggets feature ................................ 20
Setting keep warm .................................................. 20
Adjusting oven temperature ..................................... 21
Operating oven light ................................................. 21
Setting the Sabbath mode feature ......................... 22-23
Self-Cleaning .................................................... 24-25
Care & Cleaning ............................................... 26-28
Cleaning recommendations table ............................... 26
Cleaning the cooktop and surface burners .................. 27
Replacing the oven light ........................................... 27
Removing & replacing oven door ............................... 28
Before You Call - Solutions to common problems ... 29-30
Appliance Warranty .............................................. 31
This Use & Care Guide is part of our commitment to customer
satisfaction and product quality throughout the service life of
your new appliance.We view your purchase as the beginning
of a relationship. To ensure our ability to continue serving you,
please use this page to record important product information.
Need help??
Visit the Frigidaire web site at www.frigidaire.com
Before you call for service, there are a few things you can
do to help us serve your better.
Read this Use & Care manual.
It contains instructions to help you use and maintain your
range properly.
If you received a damaged range ...
immediately contact the dealer (or builder) that sold you the
range.
Save time and money.
Check the section titled “Before you call”. This section helps
step you through some common problems that might occur.
If you do need service, help is only a phone call away. A list
of toll-free customer service numbers are included in the
back of this manual. Or call Frigidaire Customer Services at
1-800-944-9044, 24 hours a day, 7 days a week.
Product Registration
Registering your product with Frigidaire enhances our ability
to serve you. You can register online at
www.frigidaire.com or by dropping your Product
Registration Card in the mail.
Serial plate
location
Serial plate location:
open storage drawer (some models) or
remove lower front panel (some models).
Record model & serial numbers here
Purchase date
Model number
Serial number
2
©2009 Electrolux Home Products, Inc.
All rights reserved. Printed in the USA
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this appliance.
Do not attempt to install or operate your appliance until you
have read the safety precautions in this manual. Safety
items throughout this manual are labeled with a WARNING
or CAUTION statement based on the risk type.
Definitions
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
WARNING
WARNING indicates a potentially hazardous
situation which, if not avoided, may result in death
or serious injury.
CAUTION
CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in minor
or moderate injury.
IMPORTANT
IMPORTANT indicates installation, operation,
maintenance or valuable information that is not hazard
related.
Important Safety Instructions
•Remove all tape and packaging before using the
range. Destroy the carton and plastic bags after
unpacking the range. Never allow children to play with
packaging material.
•Proper Installation—Be sure your appliance is
properly installed and grounded by a qualified
technician in accordance with the National Fuel Gas
Code ANSI Z223.- latest edition, or in Canada CAN/
CGA B149.1, and CAN/CGA B149.2, and the the
National Electrical Code ANSI/NFPA No.70-latest
edition, or in Canada CSA Standard C22.1, Canadian
Electrical Code, Part 1, and local code requirements.
Install only per installation instructions provided in the
literature package for this range. Ask your dealer to
recommend a qualified technician and an authorized
repair service. Know how to disconnect the power to the
range at the circuit breaker or fuse box in case of an
emergency.
WARNING
If the information in this manual is not followed
exactly, a fire or explosion may result causing
property damage, personal injury or death.
FOR YOUR SAFETY:
— Do not store or use gasoline or other
flammable vapors and liquids in the vicinity of
this or any other appliance.
— WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not
use any phone in your building.
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call
the fire department.
— Installation and service must be performed
by a qualified installer, servicer or the gas
supplier.
WARNING
• All ranges can tip.
• Injury to persons could result.
• Install anti-tip device packed
with range.
• See Installation Instructions.
To reduce the risk of tipping, the
range must be secured by properely
installed anti-tip bracket provided with
the range. To check if the bracket is
installed properly, visually check that
rear leveling leg is inserted into and
fully secured by the anti-tip bracket by
removing lower front panel or storage
drawer from the range.
For models equipped with a warmer drawer or lower
oven, grasp the top rear edge of the range and carefully
attempt to tilt it forward. Refer to the installation
instructions for proper anti- tip bracket installation.
•Never modify or alter the construction of a range
by removing the leveling legs, panels, wire covers,
anti-tip brackets/screws, or any other part of the
range.
Save these instructions for future reference.
3
IMPORTANT SAFETY INSTRUCTIONS
WARNING
NEVER use this appliance as a space heater to
heat or warm the room. Doing so may result in
carbon monoxide poisoning.
NEVER cover any slots, holes or passages in the
oven bottom or cover an entire rack with materials
such as aluminum foil. Doing so blocks air flow
through the oven and may cause carbon monoxide
poisoning. Aluminum foil linings may trap heat,
causing a fire hazard.
Stepping, leaning or sitting on the door or
drawers of a range can result in serious injuries
and also cause damage to the appliance. DO NOT
allow children to climb or play around the range. The
weight of a child on an open oven door may cause the
range to tip, resulting in serious burns or other injury.
Storage in or on appliance—flammable materials
should not be stored in an oven, near surface
units or in the storage drawer, warmer drawer or
lower oven. This includes paper, plastic and cloth
items, such as cookbooks, plasticware and towels, as
well as flammable liquids. Do not store explosives, such
as aerosol cans, on or near the range.
DO NOT LEAVE CHILDREN ALONE —children should
not be left alone or unattended in the area where
appliance is in use. They should never be allowed to sit
or stand on any part of the appliance, including the
storage drawer, lower broiler drawer, warmer drawer or
lower double oven.
CAUTION
Do not store items of interest to children in the
cabinets above a range or on the backguard of
the range. Children climbing on the range to reach
items could be seriously injured.
• Remove the oven door from any unused range if it
is to be stored or discarded.
•User servicing—Do not repair or replace any part of
the appliance unless specifically recommended in
the manuals. All other servicing should be done only by a
qualified technician, This may reduce the risk of personal
injury and damage to the range.
4
IMPORTANT
For electric ignition models only: Do not attempt to
operate the range during a power failure. If the
power fails, always turn off the range. If the range is not
turned off and the power resumes, the range will begin
to operate again. Once the power resumes, reset the
clock and oven function.
CAUTION
• DO NOT TOUCH SURFACE BURNERS, AREAS NEAR
THESE BURNERS, OVEN BURNERS OR INTERIOR
SURFACES OF THE OVEN. Both surface and oven
burners may be hot even though flames are not
visible. Areas near surface burners may become hot
enough to cause burns. During and after use, do not
touch, or let clothing or other flammable materials
touch these areas until they have had sufficient time
to cool. Among these areas are the cook top,
surfaces facing the cook top, the oven vent openings
and surfaces near these openings, oven door and
window.
• Wear proper apparel—loose-fitting or hanging
garments should never be worn while using the
appliance. Do not let clothing or other flammable
materials contact hot surfaces.
• Do not use water or flour on grease fires—
smother the fire with a pan lid, or use baking
soda, a dry chemical or foam-type extinguisher.
• When heating fat or grease, watch it closely. Fat
or grease may catch fire if allowed to become too hot.
• Use dry potholders - moist or damp potholders
on hot surfaces may result in burns from steam.
Do not let potholders touch hot heating elements. Do
not use a towel or other bulky cloth instead of a
potholder.
• Do not heat unopened food containers - buildup
of pressure may cause container to burst and
result in injury.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS FOR USING
YOUR COOKTOP
WARNING
Use Proper Flame Size—Adjust flame size so it does
not extend beyond the edge of the utensil. The use of
undersized utensils will expose a portion of the burner
flame to direct contact and may result in ignition of
clothing. Proper relationship of utensil to flame will also
improve efficiency.
• Know which knob controls each surface burner.
Place a pan of food on the burner before turning it on,
and turn the burner off before removing the pan.
• Always turn knob to the full LITE position when
igniting top burners. Visually check that burner has lit.
Then adjust the flame so it does not extend beyond the
edge of the utensil.
• Utensil handles should be turned inward and not
extend over adjacent surface burners—To reduce
the risk of burns, ignition of flammable materials, and
spillage due to unintentional contact with the utensil, the
handle of the utensil should be positioned so that it is
turned inward, and does not extend over adjacent
surface burners.
• Never leave surface burners unattended at high
heat settings—Boilovers cause smoking and greasy
spillovers that may ignite, or a pan that has boiled dry
may melt.
• Glazed cooking utensils—Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for cook top service without breaking
due to the sudden change in temperature. Check the
manufacturer’s recommendations for cook top use.
• When flaming foods under a ventilating hood, turn
the fan on.
IMPORTANT INSTRUCTIONS FOR USING
YOUR OVEN
• Use care when opening oven door , warmer
drawer or lower oven door—Stand to the side of the
range when opening the door of a hot oven. Let hot air or
steam escape before you remove or replace food in the
oven.
• Keep Oven Vent Ducts Unobstructed. The oven vent
is located below the backguard. Touching the surfaces in
this area when the oven is operating may cause severe
burns. Also, do not place plastic or heat-sensitive items
on or near the oven vent. These items could melt or
ignite.
• Placement of Oven Racks. Always place oven racks in
desired location while oven is cool. If rack must be
moved while oven is hot use extreme caution. Use
potholders and grasp the rack with both hands to
reposition. Do not let potholders contact the hot heating
elements in the oven. Remove all utensils from the rack
before moving.
• Do not use the broiler pan without its insert. The
broiler pan and its insert allow dripping fat to drain and
be kept away from the high heat of the broiler.
• Do not cover the broiler insert with aluminum foil.
Exposed fat and grease could ignite.
• Protective liners—Do not use aluminum foil to line the
oven bottom. Only use aluminum foil as recommended in
this manual. Improper installation of these liners may
result in risk of electric shock, or fire.
IMPORTANT SAFETY NOTICE
The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth
defects or other reproductive harm, and requires
businesses to warn customers of potential exposure to such
substances.
• Air curtain or other overhead range hoods, which
operate by blowing a downward air flow on to a range,
shall not be used in conjunction with gas ranges other
than when the hood and range have been designed,
tested and listed by an independent test laboratory for
use in combination with each other.
5
IMPORTANT SAFETY INSTRUCTIONS
SELF-CLEANING OVENS
• Clean in the self-cleaning cycle only the parts
listed in this Use & Care Manual. Before self-cleaning
the oven, remove the broiler pan and any utensils or
foods from the oven.
• Do Not Use Oven Cleaners—No commercial oven
cleaner or oven liner protective coating of any kind should
be used in or around any part of the oven.
• Do Not Clean Door Gasket—The door gasket is
essential for a good seal. Care should be taken not to
rub, damage or move the gasket.
• The health of some birds is extremely sensitive to the
fumes given off during the self-cleaning cycle of any
range. Move birds to another well-ventilated room.
IMPORTANT INSTRUCTIONS FOR CLEANING
YOUR RANGE
• Clean the range regularly to keep all parts free of
grease that could catch fire. Pay particular attention
to the area around each surface element. Do not allow
grease to accumulate.
• Kitchen cleaners and aerosols—Always follow the
manufacturer’s recommended directions for use.
Be aware that excess residue from cleaners and aerosols
may ignite causing damage and injury.
• Clean ventilating hoods frequently—Grease should
not be allowed to accumulate on the hood or filter.
Follow the manufacturer’s instructions for cleaning hoods.
Grounding Instructions
Grounding type
wall receptacle
DO NOT, under any
circumstance, cut,
remove, or bypass the
grounding prong.
Power supply cord
with 3-prong
grounding plug
6
WARNING
Avoid fire hazard or electrical shock. Do not use an
adapter plug, an extension cord, or remove grounding
prong from electrical power cord. Failure to follow this
warning can cause serious injury, fire or death.
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and
should be plugged directly into a properly grounded
receptacle. DO NOT cut or remove the grounding prong
from this plug.
For personal safety, the range must be properly
grounded. For maximum safety, the power cord must
be plugged into an electrical outlet that is correctly
polarized and properly grounded.
If a 2-prong wall receptacle is the only available outlet,
it is the personal responsibility of the consumer to have
it replaced with a properly grounded 3-prong wall
receptacle installed by a qualified electrician.
See the INSTALLATION INSTRUCTIONS packaged with this
range for complete installation and grounding instructions.
Conversion to Liquefied Petroleum Gas
WARNING
Personal injury or death from electrical shock may occur
if the range is not installed by a qualified installer or
electrician.
Any additions, changes or conversions required in order
for this appliance to satisfactorily meet the application
needs must be made by a qualified technician.
If your gas range model is designed to allow for L.P.
conversion, the L.P. conversion kit may be obtained from
your local appliance dealer and should be installed by a
qualified service technician. Before installing the kit be sure
to follow the L.P. Installation Instructions carefully.
FEATURES AT A GLANCE
2
1
TIMED CHICKEN NUGGETS
PIZZA DELAY TIMER
DOOR CONVECT BAKE
COOKTOP ROAST BROIL
Your gas range features include:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Electronic oven control with kitchen timer.
Convect (convection) cooking control included (some models).
Left front burner valve and control knob.
Left rear burner valve and control knob.
Center accent burner valve and control knob (some models).
Right front burner valve and control knob.
Right rear burner valve and control knob.
Burner grates (colors vary with model).
Center burner grate (some models).
Oven interior light with removable cover.
Automatic oven door light switch (some models).
Self-cleaning oven interior.
Self-clean door latch.
Adjustable interior oven rack(s). Effortless Oven
Rack™ system (not shown-some models).
Convect (convection) fan (some models).
Large 1-piece oven door handle.
Full width oven door with window.
Storage drawer with large 1-piece door handle
(some models) or lower cover panel (some
models).
Easy to clean upswept cooktop.
5,000 BTU simmer burner (some models).
9,000 BTU standard burner (some models).
9,000 BTU center or accent burner (some
models).
12,000 BTU Quick Boil burner (some models).
14,000 or 17,000 BTU Quick Boil burner (some
models).
Burner drip pan (not shown-some models).
Broil pan (some models).
Broil pan insert (some models).
Roasting rack (optional-some models).
Cast-iron griddle grate (in place of middle
grate; optional-some models).
Leveling legs and anti-tip bracket
(included).
TIMED CHICKEN NUGGETS
PIZZA DELAY TIMER
19
8
3
8
9
4
5
7
6
13
11
10
12
15
14
17
16
29
18
30
28
21
23
24
Note: The features shown for your
appliance may vary according to model
type & color.
20
21
22
27
Be sure to visit us online at
www.frigidaire.com
for a complete line of accessories.
DOOR CONVECT BAKE
COOKTOP ROAST BROIL
21
21
23
24
26
7
BEFORE SETTING OVEN CONTROLS
Oven vent location
Types of oven racks
The oven vent is located below the control panel (See
Fig. 1). When the oven is on, warm air passes through this
vent. This venting is necessary for proper air circulation in
the oven and good baking results. Do not block the oven
vent.
oven vent location
flat handle
oven rack
flat
oven rack
half oven
rack
Fig. 1
Removing, replacing & arranging racks
To remove - pull the rack forward until it stops. Lift up
front of rack and slide out.
To replace - fit the rack onto the guides on the oven walls.
Tilt the front of the rack upward and slide the rack back into
place.
Arranging - always arrange the oven racks when the oven
is cool (prior to operating the oven).
bottom
oven rack
6
The flat oven rack or flat handle oven rack (some
models) may be used for most cooking needs. The half
rack (some models) design comes with a removable
section that allows for taller cooking utensils. The offset
oven rack (some models) is designed to place the base of
the rack about 1/2 of a rack position lower than normal.
This rack design provides several additional possible
positions between the standard positions. To maximize
oven cooking space place the bottom oven rack (some
models) in the lowest rack position for baking or roasting
large cuts of meat. The Effortless™ Oven Rack (some
models) is described later in this section.
5
Air circulation in the oven
CAUTION
Always use oven mitts when using the oven. When
using the appliance, oven racks and cooktop will become
very hot which can cause burns.
For best baking results allow 2-4" (5-10 cm) around the
cookware for proper air circulation and be sure pans and
cookware do not touch each other, the oven door, sides or
back of the oven cavity. Hot air must be able to circulate
around the pans and cookware in the oven for even heat to
reach around the food.
4
3
2
1
Fig. 2
Recommended rack positions by food type
Food type
Position
Broiling meats
Cookies, cakes, pies, biscuits & muffins
Frozen pies, angel food cake, yeast, bread
and casseroles
Small cuts of meat or poultry
Turkey, roast or ham
See broil
3 or 4
8
offset
oven rack
1 or 2
1 or 2
1
Baking layer cakes with 1 or 2 oven racks
For best results when baking cakes using 2 oven racks,
place cookware on rack positions 2 & 5 (See Figs. 2 & 3).
For best results when using a single oven flat rack, place
cookware on rack positions 2, 3 or 4 (See Figs. 2 &4).
Fig. 3
Fig. 4
BEFORE SETTING OVEN CONTROLS
Effortless™ Oven Rack system
Some models are equipped with a special oven rack system
that automatically partially extends the oven rack from the
interior oven glides to assist in easier access to your food
items. This feature works whenever the oven door is
opened or closed.
To assemble the Effortless™ Oven Rack system:
1. Locate all required parts. You will need the supplied
oven rack (Effortless™ Oven Rack is a flat rack with a
special dark coating on the left and right rack
sides) and the 2 supplied chrome connector arms.
2. Open the oven door. Be sure the oven is completely
cool before proceeding.
3. Place the oven rack in positions 2, 3 or 4 only (see
previous page to verify positions).Be sure the rack
connector brackets are at the rear of the range and
pointing towards oven bottom (See Fig. 2).
4. Assemble one connector arm at a time. With the oven
door open and the oven rack in place, install one end of
the connector arm to the hole in the door connector
bracket (Fig. 1) and the other end in the hole in the
rack connector bracket (Fig. 2 and as in Fig. 3). The
oven rack may need to be adjusted in or out in the rack
position to match the length of the connector arm.
5. While holding the connector arm in place, twist the
connector arm so the ends of the connector arm point
upwards (See Figs. 4 & 5). The connector arm should
now be locked into position.
6. Repeat steps 4 and 5 for the other connector arm.
7. Once both connector arms are properly in place, be
sure to test the oven rack operation by gently closing
the oven door. The oven rack should move in and out of
the oven freely when the door is opened or closed.
IMPORTANT
Only the Effortless™ Oven Rack system should be
used in oven rack position 2. Placing ANY other rack
in oven rack position 2 will prevent the oven door
from fully closing and may damage the oven door,
oven cavity or the door connector brackets.
If the rack system is not assembled with the connector
arms the Effortless™ Oven rack may be used in oven rack
positions 2 thru 6. Do not attempt to use the Effortless™
Oven rack in rack position 1.
rack connector
bracket
door
connector
bracket
Fig. 2
Fig. 1
oven
rack
connector
arm
Fig. 3 - assembly
of the Effortless™
Oven Rack
open oven
door
connector
arm
CAUTION
REMOVE ALL OVEN RACKS and accessories before
starting a self-clean cycle. If the oven racks are left
in the oven during the self-clean cycle, the glide ability of
the Effortless™ Oven Rack system will be damaged and
will cause oven racks to loose their shiny finish and or
turn blue. Remove ALL oven racks and clean according
to instructions provided in the Care & Cleaning section of
this manual.
Make sure the oven and oven racks are COMPLETLY cool
and safe to touch before attempting to assemble or
disassemble the Effortless™ Oven Rack system. Never
pick up hot oven rack parts.
connector
arm
Fig. 4
connector
arm
left and right
door connector
brackets
with connector arm ends
shown in locked position
(pointing upwards)
Fig. 5
Fig. 6 - Effortless™ Oven Rack after assembly
9
BEFORE SETTING SURFACE CONTROLS
Using proper cookware
Set proper burner flame size
For best cooking results,
cookware should have flat
bottoms that rests level on the
burner grate. Before using
cookware, check for flatness by
rotating a ruler across the
bottom of the cookware (Fig. 1).
The color of the flame is the key to proper burner adjustment.
A good flame is clear, blue and hardly visible in a well-lighted
room. Each cone of flame should be steady and sharp. Adjust
or clean burner if flame is yellow-orange.
Fig. 1
CAUTION
Do not place flammable items such as plastic salt and
pepper shakers, spoon holders or plastic wrappings on
the cooktop when it is in use. These items could melt or
ignite. Potholders, towels or wooden spoons could catch
fire if placed too close to the range cooktop.
IMPORTANT
Do not place aluminum foil, or ANY material that
can melt on the range cooktop. If these items melt
they may damage the cooktop.
NOTE
The size and type of utensil used, and the amount and
type of food being cooked will influence the settings
needed for best cooking results.
For most cooking; start on the highest setting and then
turn to a lower setting to complete the process. Use the
recommendations below as a guide for determining proper
flame size for various types of cooking (Fig. 2)
For deep fat frying; use a thermometer and adjust the
surface knob accordingly. If the fat is too cool, the food will
absorb the fat and be greasy. If the fat is too hot, the food
will brown so quickly that the center will be undercooked.
Do not attempt to deep fat fry too much food at once as the
food will neither brown or cook properly.
Flame Size*
Type of Cooking
High Flame
Start most foods; bring water to a boil;
pan broiling.
Medium Flame
Maintain a slow boil; thicken sauces,
gravies; steaming.
Low Flame
Keep foods cooking; poach; stewing.
*These settings are based for medium-weight metal or
aluminum pans with lids. Settings may vary when using
other types of pans.
Fig. 2
Cookware material types
The most popular materials available are:
Aluminum - Excellent heat conductor. Some types of food
will cause it to darken (Anodized aluminum cookware
resists staining & pitting).
CAUTION
Never extend the flame beyond the outer edge of the
cooking utensil. A higher flame wastes energy, and
increases your risk of being burned by the flame (Fig. 3).
Copper - Excellent heat conductor but discolors easily.
Stainless - Slow heat conductor with uneven cooking
results. Is durable, easy to clean and resists staining.
Correct flame
setting
Cast Iron - A slow heat conductor however will retain heat
very well. Cooks evenly once cooking temperature is
reached.
Porcelain-enamel on metal - Heating characteristics will
vary depending on base material.
Incorrect
flame setting
Glass - Slow heat conductor.
Fig. 3
10
SETTING SURFACE CONTROLS
Setting surface controls
Your gas range may be
equipped with many
different sized surface
burners. The ability to heat
food quicker and in larger
volumes increases as the
burner size increases. It is
important to select
cookware that is suitable for
the amount and type of food
being prepared. Select a
burner and flame size
appropriate for the
cookware size.
CAUTION
Do not place flammable items such as plastic salt and
pepper shakers, spoon holders or plastic wrappings on
the cooktop when it is in use. These items could melt or
ignite. Potholders, towels or wooden spoons could catch
fire if placed too close to the range cooktop.
Seasoning, using and caring for the griddle
Fig. 1
The smaller simmer burner (some models) is best suited
for simmering delicate sauces, etc. The standard size
(9,500 BTU) burners may be used for most surface cooking
needs.
The larger quick boil burner or burners (some models) are
best used when bringing large quantities of liquid to
temperature and when preparing larger quantities of food.
Setting a surface burner
1. Place cooking utensil on top of surface burner grate.
Make sure the cooking untensil is centered and stable
on the grate.
2. Push the desired surface control knob in and turn
counterclockwise out of the OFF position (Fig. 1).
3. Release the knob and rotate to the lite position. Visually
check that the gas burner has lit.
4. Push the control knob in and turn counterclockwise to
the desired flame size. Use the control knob markings
and adjust the flame as needed.
IMPORTANT
In the event of an electrical power outage, the surface
burners can be lit manually. To light a surface burner,
hold a lit match to the burner head, then slowly turn the
surface control knob to lite. After burner lights push in
and turn knob to desired setting. Use caution when
lighting surface burners manually.
NOTE
DO NOT cook with the surface control knob left in the
LITE position. The electronic ignitor will continue to spark
if the control knob is left in the LITE position. When
setting any surface control knob to the LITE position, all
electronic ignitors will spark at the same time. However,
only the surface burner you are setting will ignite.
Before first use:
• Wash griddle in hot soapy water. Rinse and dry
completely.
• Apply a thin coat of vegetable oil to the entire surface
(front and back of griddle).
• Preheat your oven to 350°F. Place the griddle on the
upper rack in your oven.
• Bake griddle for 1 hour at 350°F, then turn oven OFF and
let cool before removing.
• The surface may appear to have a tacky feel to it from
the seasoning process. If desired, wash the griddle in hot
soapy water, rinse well, and dry completely.
Using the griddle:
Remove the center burner grate and carefully replace with
the griddle (some models). Preheat the griddle for 5
minutes on medium to medium low setting. Slow preheat
ensures even heat distribution during the cooking process.
DO NOT preheat the griddle on HI setting. Preheating on HI
may warp the griddle and prevent even heat distribution.
After each use:
• To prevent rusting, store in a dry place and keep
uncovered.
• After each use, clean with a stiff brush and hot water
only.
• Do not clean griddle in the dishwasher.
• Dry Immediately and apply a light coating of vegetable oil
to griddle before storing.
Home Canning
Be sure to read and observe all the following points when
home canning with your appliance. Check with the USDA
(United States Department of Agriculture) website and be
sure to read all the information they have available as well as
follow their recommendations for canning procedures.
• Use only quality flat bottom canners when home canning.
Use a straight-edge to check canner bottom (see
“Cookware material types” in the Before setting surface
controls section).
• Start with hot tap water to bring water to boil more quickly.
• Use the highest heat seating when first bringing the water
to a boil. Once boiling is achieved, reduce heat to lowest
possible setting to maintain that boil.
11
OVEN CONTROL FUNCTIONS
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with the various pad functions of the oven as described below.
bake time — Use
to enter the
length of baking
time needed.
timer on /
off — Use to
set or cancel
the minute
timer.
bake —Use to
enter the
normal Bake
feature.
delay start — Use with
bake, convection,
convect convert and
self-clean features to
program a delayed timed
bake or delayed selfcleaning cycle.
broil —
Use to set
broil
feature.
convect — Use to
set the convection
bake or roast
features.
TIMED CHICKEN NUGGETS
PIZZA DELAY TIMER
convect convert —
Use to convert a
standard bake recipe
to a convection bake
recipe.
0 thr 9
number pads
— Use to enter
temperature
and times.
DOOR CONVECT BAKE
COOKTOP ROAST BROIL
self-clean — Use to
set a 2, 3 or 4 hour
self-clean cycle.
set clock pad—
Use to set the
time of day.
oven light
—Use to turn
the oven
light ON and
OFF.
oven lockout
— Use to
activate oven
lockout
setting.
quick preheat
— Use to quickly
preheat the
oven.
pizza — Use
to set the
pizza
features.
keep warm —
Use to set the
keep warm
features.
chicken nuggets —
Use to set the
chicken nuggets
feature.
start —
Use to
start all
oven
features
(not used
with oven
light).
cancel — Use to
cancel any oven
mode previously
entered except
the oven lockout,
time of day &
minute timer.
Press cancel to
stop cooking.
Minimum & maximum control settings
All of the features listed have minimum and
maximum time or temperature settings that
may be entered into the control. An ENTRY
acceptance beep will sound each time a
control pad is touched (the Oven Lockout pad
is delayed by 3 seconds).
An ENTRY ERROR tone (3 short beeps) will
sound if the entry of the temperature or time
is below the minimum or above the maximum
settings for the feature.
12
Feature
quick preheat temp.
bake temp.
broil temp.
timer
self-clean time
convect bake
convect roast
convect broil*
pizza
chicken nuggets
*some models
Min. temp. /time
170°F / 77°C
170°F / 77°C
400°F / 205°C
1 Min.
2 hours
300°F / 149°C
300°F / 149°C
300°F / 149°C
300°F / 149°C
300°F / 149°C
Max. temp. /time
550°F / 288°C
550°F / 288°C
550°F / 288°C
11 Hrs. 59 Mins.
4 hours
550°F / 288°C
550°F / 288°C
550°F / 288°C
550°F / 288°C
550°F / 288°C
SETTING OVEN CONTROLS
Setting the clock
Setting 12 or 24 hour display modes
When the range is first powered up, “12:00” will flash in the
display (See Fig. 1).
The clock display mode allows you to choose between 12 or
24 hr mode. The factory pre-set clock display mode is 12
hr. See the example below to change the default mode to
24 hr display.
To set the clock to 1:30:
Step
Press
To set 12 or 24 hour mode:
Step
1. Press set clock.
Press
1. Press and hold set clock
2. Enter 1:30.
for 6 seconds.
2. Press self-clean
3. Press start.
to toggle between “12 Hr dAY”
or “24 Hr dAY” display modes
(See Figs. 4 & 5).
NOTE
It is recommended to always set the clock for the correct
time of day before using the appliance. The clock cannot
be changed whenever any timed or delayed time feature
is active.
3. Press start to accept.
Fig. 4
Fig. 5
Changing oven temperature display
The oven control is preset to display °F (Fahrenheit) when
shipped from the factory.
Fig. 1
Changing between continuous bake
setting or 6-Hour Energy Saving feature
The oven control has a factory preset built-in 6 Hour Energy
Saving feature that will turn off the oven if the oven is left
on for more than 6 hours. The control can be programmed
to override this feature to continuously bake.
To turn off 6-Hour Energy saving mode:
Step
To change the temperature to display °C (Celsius)
(oven should not have bake or self-clean active
when setting this feature):
Step
1. Press and hold broil for
Press
6 seconds.
Press
1. Press and hold timer on•off
2. Press self-clean to toggle
between “FAhrn ht” or
“CELSIUS” temperature display
modes (Figs. 6 & 7).
If Celsius display is needed, select
“CELSIUS”.
for 6 seconds.
2. Press self-clean
to toggle between “6 Hr OFF”
(Fig. 2) or “StAY On” (Fig. 3).
Select “StAY On” to turn off
6-Hour Energy Saving mode.
3. Press start to accept.
3. Press start to accept.
Fig. 6
Fig. 2
Fig. 7
Fig. 3
13
SETTING OVEN CONTROLS
Setting a silent control panel
Silent mode allows the oven control to operate without
sounds. The control may be programmed for silent
operation and later returned to operating with all the
normal sounds.
To set silent mode:
Step
Press
1. Press and hold
delay start for 6 seconds.
Fig. 3
Setting the minute timer
The timer allows you to track your cooking times without
interferring with the cooking process. The timer may be set
from 1 minute up to 11 hours and 59 minutes.
To set the timer for 5 minutes:
2. Press self-clean
Step
to toggle between “bEEP On” or
“bEEP OFF”. Select “bEEP OFF” for
silent mode. (Figs. 1 & 2)
Press
1. Press timer on•off.
2. Enter 5 minutes.
3. Press start to accept
3. Press start.
Press timer on•off to turn
the minute timer off.
Fig. 1
Fig. 2
Setting oven lockout
The control may be programmed to lock the oven door and
lockout the oven control pads.
To set the oven lockout feature:
Step
Press
The minute timer will display hours and minutes until 1
hour remains on the timer. Once less than 1 hour
remains, the display will count down in minutes and
seconds. Once the timer has less than 1 minute
remaining only seconds will display.
The minute timer DOES NOT start or stop the cooking
process. It serves as an extra timer in the kitchen that
will beep when the set time has run out. The minute
timer can be used alone or while using any of the other
oven features.
Press and hold lock pad for 3 seconds.
“door Loc” will appear in the display until
the oven door is completely locked.
To unlock the oven lockout feature:
Step
NOTES
Press
Press and hold lock pad for
3 seconds. Once the oven door has
unlocked the “door Loc” message will
no longer display (See Fig. 3).
When the minute timer is in use during a cooking
process, the minute timer will be shown in the display.
To view the status of other features, press the pad once
for the other feature to view the status of that feature.
Add a minute feature
NOTES
DO NOT attempt to open the oven door while the
“door Loc” (door lock) message is visible. Allow 15
seconds for the oven door to completely lock. Once the
oven door has locked, the current time of day will
reappear in the display. If a control pad is pressed when
the oven lockout feature is active the control may triple
beep which indicates the keypad action is not available
when the oven lockout is active.
14
Use the add 1 minute feature to set additional minutes to
the timer. Each press of the key pad will add 1 additional
minute. If add a minute key pad is pressed when the timer
is not active, the timer will begin counting down from 1
minute.
To add 2 additional minutes to the active timer:
Step
Press add a minute twice.
Press
SETTING OVEN CONTROLS
Setting quick preheat
Setting bake time
Use the quick preheat feature when using single rack
baking to quickly heat the oven to bake temperatures. Use
this feature only for standard baking. A reminder tone will
sound indicating when to place the food in the oven.
Use the timed bake feature to automatically turn the oven off
after a desired length of time.
When the oven is finished preheating quick preheat will
become just like the bake feature and continue to bake
until cancelled.
WARNING
FOOD POISONING HAZARD. Do not let food sit for more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness.
To set quick preheat with a default oven set
temperature of 350°F:
Step
Press
To set bake to end after 30 minutes:
Step
1. Press quick preheat.
1. Press bake time.
Press
2. Press start (See Fig. 1).
2. Enter 30 minutes.
Fig. 1
Setting bake
Use the bake feature to cook most food items that require
normal cooking temperatures. A reminder tone will sound
once the oven reaches the set temperature. Bake can be
set at any temperature from 170°F to 550°F.
To set bake using a default temperature of 350°F:
Step
Press
1. Press bake.
3. Press bake.
4. Press start.
When the set bake time runs out:
1. "END" will appear in the display window and the oven
will shut-off automatically.
2. The control will beep 3 times every 30 seconds as a
reminder until the cancel key pad is pressed.
2. Press start
NOTES
To set bake for oven temperature of 425°F:
Step
Press
1. Press bake.
2. Enter 425.
3. Press start
NOTES
The default maximum bake time setting is 6 hours.
After the bake time feature has been activated, press
the bake time pad to display the bake time remaining.
The bake time feature may be set with the convect
bake and convect roast features. Bake time will not
operate with the broil feature.
The oven will bake no longer than 6 hours from the last
time the oven door was opened.
If you wish to continuously bake, see “Changing between
continuous bake setting or 6-Hour Energy Saving
feature” for further information.
15
SETTING OVEN CONTROLS
To program oven for delay start time and
to shut-off automatically
The delay start feature allows you to set a start and end
time to the cooking process. Prior to setting a delay start,
be sure the time of day is set correctly. If the delay start
needs to be set more than 12 hours in advance (12-24
hours), the control must first be programmed for 24 hour
display mode. See “Setting 12 or 24 hour display modes”
section.
When the set bake time runs out:
1. "END" will appear in the display window and the oven
will shut-off automatically (See Fig. 2).
2. The control will beep 3 times every 30 seconds as a
reminder until the cancel key pad is pressed.
WARNING
FOOD POISONING HAZARD. Do not let food sit for more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness.
To program the oven for a delay start and to shut-off
automatically (example for baking at 375°F for 50
minutes and starting at 5:30):
Step
Press
1. Press bake time.
2. Enter 50 mintues.
3. Press start.
4. Press delay start (See Fig. 1).
5. Enter 530.
6. Press and hold start.
7. Enter 375.
8. Press start.
16
Fig. 1
Fig. 2
NOTES
After the delay start feature has activated and started
the cooking process, press the bake time pad to display
the bake time remaining.
The delay start feature may be used with the convect
or convect convert cooking features. Bake time will
not operate when using the broil feature.
SETTING OVEN CONTROLS
Convect (all models)
Benefits of the convect features
— Foods may cook up to 25 to 30% faster, saving time and
energy.
— Multiple rack baking.
— No special pans or bakeware needed.
Convect uses a fan to circulate the oven's heat uniformly
and continuously around the oven. This improved heat
distribution allows for fast, even cooking and browning
results. It also gives better baking results when using two
racks at the same time.
Heated air flows around the food from all sides, sealing in
juices and flavors. Breads and pastry brown more evenly.
Layer cakes will have better results using the bake pad.
Most foods baked in a standard oven can be cooked faster
and more evenly with the convect feature.
Suggestions for convect baking
1. For optimum cooking results it is recommended to
preheat the oven when baking foods such as cookies,
biscuits and breads.
2. Reduce oven temperature 25°F from recipe’s
recommended oven temperature. Follow the remainder
of the recipe’s instructions using the minimum
recommended cook time.
3. When using 2 oven racks at the same time, place in
positions 2 & 5 for best results (Fig. 1).
Convect bake (all models)
To set convect (convection bake) with a default oven
set temperature of 350°F:
Step
Press
1. Press convect.
2. Press start (See Fig. 2).
Fig. 2
NOTES
When using convection bake cook time reductions may
vary depending on the amount and type of food being
cooked.
6
5
4
3
2
1
Fig. 1
Convect roast (all models)
Meats cooked with convect roast will be juicer and
poultry will be crisp on the outside while staying tender and
moist on the inside.
NOTE
When choosing between the convect features, use the
convect key pad to toggle between the convect
bake or convect roast choices.
Suggestion for convect roasting
1. Preheating is not necessary when roasting foods using
convect roast.
2. Since convect roast cooks food faster, reduce the
cook time by 25% from the recommended cook time of
your recipe (check the food at this time). If necessary,
increase cook time until the desired doneness is
obtained.
3. Do not cover foods when dry roasting - this will prevent
the meat from browning properly.
To set convect roast (convection roast) with a
default oven set temperature of 350°F:
Step
Press
1. Press convect.
2. Press convect again.
3. Press start (See Fig. 3).
The convection fan will take 6 minutes to begin
rotating once convection bake or convection roast has
been activated.
Fig. 3
17
SETTING OVEN CONTROLS
Setting convect (convection) convert
The convect convert feature allows you to convert any
baking recipe using the convect (convection) feature. The
control uses the normal recipe settings and adjusts to a
lower temperature for convection baking.
Convect convert can only be used with the convect bake
feature.
To set convect using default oven set temperature
of 350°F and adding the convect convert:
Step
Press
1. Press convect.
2. Press convect convert.
NOTES
When convect convert is used with a cook time or a
delay start setting, the convect convert feature will
display a "CF" for check food when the bake time is
75% complete (See Fig. 2). At this time the oven control
will sound 1 long beep at regular intervals until the set
cook time has finished.
The convection fan will take 6 minutes to begin
rotating once the convect convert feature has been
activated.
When using convect convert cook time reductions may
vary depending on the oven set temperature.
The minimum amount of cook time allowed using the
convect convert feature with a bake time or a delay time
bake setting is 20 minutes.
Fig. 2
18
Layer cakes will have better results using the normal
bake feature.
SETTING OVEN CONTROLS
Broil
Use the broil feature to cook meats that require direct
exposure to flame heat for optimum browing results.
When broiling always remember to arrange the oven
racks while oven is still cool. Position the oven rack as
suggested in the broil settings table (See Fig. 4).
To set broil:
Step
Insert
6
5
4
Press
1. Place the broiler insert on the
broil pan, then place meat on
the insert. Remember to follow
all warnings and cautions.
Broil pan
Fig. 2
2. Arrange the interior oven rack to
recommended position (Figs. 1 & 4).
For optimum browning results,
preheat oven for 5 minutes
before adding food.
Fig. 1
Fig. 3
CAUTION
3. Be sure to place food and pan
directly under upper oven burner.
Close the oven door.
The broiler pan and the insert (some models) allows
grease to drain and be kept away from the high heat of
the broiler. DO NOT use the pan without the insert (Fig.
2). DO NOT cover the insert with foil; the exposed grease
could ignite. DO NOT use the broil pan without the insert
or cover the insert with aluminum foil. The exposed fat
could ignite. To insure proper results use ONLY Electrolux
Home Products, Inc. approved broil pan & insert.
4. Press broil.
5. Press start (See Fig. 3)
WARNING
Should an oven fire occur, close the oven door and turn
the oven OFF. If the fire continues, use a fire
extinguisher. DO NOT put water or flour on the fire. Flour
may be explosive.
NOTE
Always pull the oven rack out to the stop position before
turning or removing the food.
Suggested broil settings table (gas oven)
Food
Steak 1” thick
Steak 1” thick
Steak 1” thick
Pork chops 3/4” thick
Chicken-bone in
Chicken-boneless
Fish
Shrimp
Hamburger 1” thick
Hamburger 1” thick
Rack position
5th or 6th*
5th or 6th*
5th or 6th*
5th
4th
5th
5th
4th
6th*
5th
Setting
Cook time in minutes
1st side
2nd side
550°F
550°F
550°F
550°F
450°F
450°F
550°F
550°F
550°F
550°F
8
6
10
8
11
10
12
8
25
15
10
8
- as directed - as directed 12
10
14
12
*Use the off-set rack if you choose to use rack position 6.
Doneness
Medium
Medium-well
Well
Well
Well
Well
Well
Well
Medium
Well
Fig. 4
19
SETTING OVEN CONTROLS
Setting pizza feature
Setting chicken nuggets feature (cont’d)
For your convenience the pizza feature provides 2 different
settings. You may use the pizza feature whether starting
with fresh or frozen pizza.
To set the pizza feature:
Step
Press
1. Press pizza once to cook frozen
pizza (Fig.1) or twice when setting
for fresh pizza (Fig. 2). You may
adjust the oven temperature
to fit your needs.
NOTES
After 20 minutes of cook time the chicken nuggets
feature will automatically start the keep warm feature.
If keep warm is not necessary, press cancel at any time
to stop keep warm.
The pizza and chicken nuggets feature uses the
convection fan. The fan will take 6 minutes to start
rotating once these features have been activated.
2. Press start
Setting keep warm
NOTES
Use only 1 oven rack for best results when using the
pizza feature.
The pizza setting is not timed. Be sure to monitor the
time needed to finish cooking the pizza.
Follow package directions for cook time. Check pizza at
the minimum recommended time.
The preset oven temperature for the frozen pizza
setting is 425°F and the fresh pizza is 400°F.
Fig. 1
Fig. 2
Setting chicken nuggets feature
1. Press chicken nuggets.
2. Press start (See Fig. 3)
The keep warm feature may be used without any other
cooking operations or may be used after cooking has
finished using bake time and or delay start.
WARNING
FOOD POISONING HAZARD. Do not let food sit for more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness.
To set the oven to keep warm:
Step
Press
1. Press keep warm.
Use the chicken nuggets feature to cook convenience style
chicken nuggets. The user may change the temperature or
bake time at any time to fit their needs. Once the 20 minute
preset cook time is finished the chicken nuggets feature will
automatically set the oven to the keep warm feature for 3
hours. You may cancel the keep warm at any time if not
needed.
To set the chicken nuggets feature:
Step
The keep warm feature will keep oven baked foods warm
for serving up to 3 hours after cooking has finished. After 3
hours the keep warm feature will shut the oven off
automatically.
2. Press start.
“HLd” for hold will appear
in the display (Fig. 4).
Press
Fig. 4
NOTE
The keep warm feature will automatically turn the oven
off after 3 hours.
Fig. 3
20
SETTING OVEN CONTROLS
Adjusting the oven temperature
Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first few
uses, follow your recipe times and temperature
recommendations carefully. If you think the oven is cooking
too hot or too cool for your recipe times, you can adjust the
control so the oven cooks hotter or cooler than the
temperature displayed.
The oven temperature my be increased +35°F (+19°C) or
decreased -35°F (-19°C) from the factory settings.
Example: increase the oven temperature by 30°F:
Step
Press
1. Press and hold bake
Operating the oven light
The interior oven light will automatically turn ON when the
oven door is opened.
Press
to turn the interior oven light ON and OFF
whenever the oven door is closed.
The interior oven light is located at the upper left rear wall
of the oven interior and is covered with a glass shield held
by a wire holder. The glass shield must be in place
whenever the oven is in use.
To change the interior oven light, see "Changing the oven
light" in the Care & Cleaning section.
for 6 seconds.
2. Enter 30.
3. Press start.
Example: decrease the oven temperature by 30°F:
Step
Press
1. Press and hold bake
for 6 seconds.
2. Enter 30.
3. Press self-clean.
4. Press start.
NOTES
Oven temperature adjustments made will not affect the
broil or self-cleaning feature temperatures.
If the temperature shows an adjustment of -30°F, and a
+30°F adjustment is needed, you can toggle between the
(-) or (+) in the display by pressing self clean.
DO NOT USE oven thermometers such as those found in
grocery stores to check the temperature settings inside your
oven. These oven thermometers may vary as much as 20 to
40 degrees from actual temperatures.
21
SETTING OVEN CONTROLS
To Set the Sabbath Feature (for use on the
Jewish Sabbath & Holidays)
For further assistance, guidelines for proper
usage and a complete list of models with the
Sabbath feature, please vist the web at
http:\\www.star-k.org.
WARNING
FOOD POISONING HAZARD. Do not let food sit for more
than one hour before or after cooking. Doing so can result
in food poisoning or sickness.
The bake time and delay start pads are used to set the
Sabbath feature. The Sabbath feature may only be used
with the bake feature. The oven temperature may be set
higher or lower after setting the Sabbath feature (the oven
temperature adjustment feature should be used only during
Jewish Holidays), however the display will not be visible and
no audible tones will be provided when a change occurs.
Once the oven is properly set using the bake feature with
the Sabbath mode active, the oven will remain continuously
ON until cancelled. The Sabbath mode will override the
factory preset 6-Hour Energy Saving feature.
If the oven light(s) are needed during the Sabbath, press
the oven light pad before activating the Sabbath feature.
Once the oven light is turned on and the Sabbath feature is
active, the oven light will remain on until the Sabbath
feature is turned OFF. If the oven light needs to be off, be
sure to turn the oven light off before activating the Sabbath
feature.
It is recommended that any oven temperature change with
the Sabbath feature active be followed with 2 presses of
the start pad. This will insure the oven remains ON even if
the attempt to set the oven temperature was lower or
higher than the oven control can accept. If the oven
temperature is set incorrectly, the oven temperature will
default to 170°F or 550°F. Try to set the desired oven
temperature again.
To program the oven for 350°F bake and activate
the Sabbath feature:
Step
Press
1. Be sure that the clock is set with
the correct time of day.
2. Arrange the oven racks and place
the food in the oven and close door.
3. Press bake.
4. Press start.
5. If a timed bake or delayed
timed bake is needed
then enter the time in this step.
If not, skip this step and continue
to step 6. Refer to the bake time
or delay start instructions.
Remember the oven will shut-off
after completing a
timed bake or delay start and
therefore may only be used once
during the Sabbath/Jewish Holidays.
The maximum delay start time
is 11 hours & 59 minutes.
6. Press and hold both the
bake time and delay start pads
for at least 3 seconds
simultaneously. The control will
beep and SAb will appear in
the display (See Fig. 1). The oven
is properly set for the Sabbath
once SAb appears in the display.
Fig. 1
22
+
SETTING OVEN CONTROLS
To Set the Sabbath Feature (cont’d)
To turn off the oven but keep the Sabbath feature
active:
Press cancel.
To turn off the Sabbath feature:
Press and hold both the
+
bake time and delay start pads
for at least 3 seconds. The control
will beep and SAb will disappear
from the display. The oven is no
longer programmed for the
Sabbath feature.
What to do during a power failure or power
interruption after the Sabbath feature was
activated:
Should you experience a power failure or interruption, the
oven will shut-off. When power is restored the oven will not
turn back on automatically. The oven will remember that it
is set for the Sabbath and the oven display will show the
message “SF” for Sabbath failure (Fig. 1).
NOTES
If a delay start time longer than 12 hours (maximum of
24 hours) in advance is desired, set the display mode for
the 24 hour setting. For detailed instructions see the
section “Setting 12 or 24 hour display modes”.
It is not advised to attempt to activate any other program
feature except BAKE while the Sabbath feature is active.
ONLY the following key pads will function correctly with
the Sabbath feature: 0-9 number pads, bake, start &
cancel. ALL OTHER KEYPADS should not be used once
the Sabbath feature is activated.
You may change the oven temperature once baking has
started. Press bake , enter the oven temperature
change (170 to 550F°) and press start (for Jewish
Holidays only). Remember that the oven control will
no longer beep or display any further changes
once the oven is set for the Sabbath feature.
If the keep warm feature was activated and the
Sabbath feature was set the keep warm feature will
automatically shut-off the oven off after 3 hours.
Fig. 1
The food may be safely removed from the oven while still in
the Sabbath feature, however the oven cannot be turned
back on until after the Sabbath/Holidays.
After the Sabbath observance turn OFF the Sabbath
feature. At the same time press and hold both the
+
pads for at least 3 seconds.
SF will disappear from the display and the oven may be
used with all normal functions.
23
SELF-CLEANING
Self-cleaning
A self-cleaning oven cleans itself with high temperatures
(well above normal cooking temperatures) which eliminate
soils completely or reduces them to a fine powdered ash
you can wipe away with a damp cloth.
Your oven allows you to set 3 different self-cleaning cycle
durations. A 3-hour cleaning time is best used for normal
cleaning; 2-hour time for light soils and a 4-hour time
option for heavier burnt-on soils.
IMPORTANT
Adhere to the following self-clean precautions:
• DO NOT use oven cleaners or oven protective
coatings in or around any part of the oven interior.
•
DO NOT clean the oven door gasket. The woven
material of the oven door gasket is essential for a
good seal. Care should be taken not to rub, damage
or remove the gasket.
•
DO NOT use any cleaning materials on the oven door
gasket. Doing so could cause damage (See Fig. 1).
•
Remove the broiler pan and insert, all utensils
and ANY ALUMINUM FOIL. These items cannot
withstand high cleaning temperatures and will
melt.
•
Completely remove ALL OVEN RACKS and ANY
ACCESSORIES. If the oven racks are not
removed they will loose their special coating
properties and no longer slide in and out of the
oven cavity effortlessly.
•
Remove any excessive spillovers. Any spills on
the oven bottom should be wiped-up and removed
before starting the self-cleaning cycle. To clean,
use hot, soapy water and a cloth. Large spillovers
can cause heavy smoke or fire when subjected to
high temperatures. DO NOT allow food spills with a
high sugar or acid content (such as milk, tomatoes,
sauerkraut, fruit juices or pie filling) to remain on the
surface as they may leave a dull spot even after
cleaning.
•
Clean any soil from the oven frame, the door liner
outside the oven door gasket and the small area at
the front center of the oven bottom. These areas
heat sufficiently to burn soil on. Clean with soap and
water. These areas are shown in white (See Fig. 1).
24
CAUTION
During the self-cleaning cycle, the outside of the range
can become very hot to the touch. DO NOT leave small
children unattended near the appliance.
The health of some birds is extremely sensitive to the
fumes given off during the self-cleaning cycle of any
range. Move birds to another well-ventilated room.
DO NOT force the oven door open. This can damage the
automatic door locking system. Use caution when
opening the door after the self-cleaning cycle is
completed. The oven may still be VERY HOT.
Fig. 1
SELF-CLEANING
Setting a self-clean cycle or a delayed
start self-clean cycle
Examples: To start an immediate self-cleaning cycle
and/or how to add a delay start time of 9:00 o’clock
and shut-off self-clean automatically:
Step
Press
1. Be sure the control is set with the correct
time of day, ALL the oven racks are
removed and the oven door is closed.
When the self-clean cycle has completed:
1. The time of day and “Hot” will appear in the display
window (See Fig.3).
2. Once the oven has cooled down for about 1 hour and
“Hot” is no longer displayed the “door OPn” message
should appear (Fig. 4). When this message turns off
the oven door may be opened. Use caution and avoid
possible burns when opening the door after the selfcleaning cycle has completed. The oven may still be
VERY HOT.
Go to step 5 if you wish to start the
self-clean immediately.
Fig. 3
Finish steps 2 thru 6 if setting a
delay start self-clean.
Fig. 4
If it becomes necessary to stop a self-clean cycle
once it has been activated:
1. Press cancel.
2. If the self-clean cycle has heated the oven to a high
temperature, allow enough time for the oven to cool
and for the “door OPn” message to appear (Fig. 4).
When this message turns off the oven door may be
opened.
3. Restart the self-clean cycle once all conditions have
been corrected.
2. Press delay start.
3. Enter 9 0 0.
4. Press start.
CAUTION
5. Press self clean once for a 3-hour
clean time, press self clean twice for
4-hour clean and press 3 times
for a 2-hour self-clean cycle time.
To avoid possible burns use care when opening the oven
door after the self-cleaning cycle. Stand to the side of
the oven when opening the door to allow hot air or
steam to escape.
6. Press start.
IMPORTANT
As soon as the controls are set, the motor driven door
lock will begin to close automatically. “door Loc” will
appear in the display (See Fig. 1). DO NOT open the
oven door while “door Loc” is on (allow 15 seconds for
the oven door to completely lock).
Once the door has locked “CLn” will appear in the
display indicating the oven will begin the self-clean
process (Fig. 2).
DO NOT force the oven door open. This can damage
the automatic door locking system. Use caution and
avoid possible burns when opening the door after the
self-cleaning cycle has completed. The oven may still be
VERY HOT.
NOTES
Whenever the self-clean feature is active you may check
the amount of time remaining in the self-clean cycle by
pressing the
pad once. The oven door will be
locked until the range has cooled sufficiently. You will
need to allow about 1 additional hour to the time
displayed before you can open the oven door.
Fig. 1
Fig. 2
When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.
25
CARE & CLEANING
Cleaning recommendation table
Surface type
Recommendation
• Aluminum (trim pieces) & vinyl
Use hot, soapy water and a cloth. Dry with a clean cloth.
• Painted and plastic control knobs
• Painted body parts
• Painted decorative trim
For general cleaning, use hot, soapy water and a cloth. For more
difficult soils and built-up grease, apply a liquid detergent directly onto
the soil. Leave on soil for 30 to 60 minutes. Rinse with a damp cloth
and dry. Do not use abrasive cleaners on any of these materials;
they can scratch. To remove control knobs, turn to the OFF position;
grasp firmly and pull straight off the shaft. To replace knobs after
cleaning, line up the flat sides of both the knob and the shaft; then
push the knob into place.
• Chrome control panel (some models)
• Decorative trim (some models)
Before cleaning the control panel, turn all controls to OFF and remove
the control knobs. To remove, pull each knob straight off the shaft.
Clean using hot, soapy water and a dishcloth. Rinse with a clean
water using a dishcloth. Be sure to squeeze excess water from the
cloth before wiping the panel; especially when wiping around the
controls. Excess water in or around the controls may cause damage to
the appliance.To replace knobs after cleaning, line up the flat sides of
both the knob and the shaft; then push the knob into place.
• Easy Care™ Stainless
Steel (some models)
If your range finish is Easy Care™ Stainless Steel (some models),
clean the stainless with warm soapy water using a clean sponge or
cloth. Rinse with clean water and dry with a soft clean cloth. DO NOT
use ANY store bought cleaners like Stainless Steel cleaners or any
other types of cleaners containing any abrasive, chlorides, chlorines or
ammonia. It is recommended to use mild dish soap and water or a 50/
50 solution of water and vinegar.
• Porcelain enamel broiler pan and broiler
pan insert (if equipped)
Gentle scouring with a soapy scouring pad will remove most spots.
Rinse with a 1:1 solution of clear water and ammonia. If necessary,
cover difficult spots with an ammonia-soaked paper towel for 30 to 40
minutes. Rinse with clean water and a damp cloth, and then scrub
with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth.
Remove all cleaners or the porcelain may become damaged during
future heating. Do not use spray oven cleaners on the cooktop.
• Door liner & body parts
• Oven racks
Oven racks must be removed from oven before starting selfclean cycle. Clean by using a mild, abrasive cleaner following
manufacturer's instructions. Rinse with clean water and dry.
• Oven door
Use soap & water to thoroughly clean the top, sides and front of the
oven door. Rinse well. You may use a glass cleaner on the outside
glass of the oven door. Do not immerse the door in water. Do not
spray or allow water or the glass cleaner to enter the door
vents. Do not use oven cleaners, cleaning powders or any harsh
abrasive cleaning materials on the outside of the oven door. Do not
clean the oven door gasket. On self-cleaning models the oven door
gasket is made of a woven material which is essential for a good seal.
Care should be taken not to rub, damage or remove this gasket.
• Cooktop surface and contoured well
areas, surface burner heads, caps and
burner grates
See Cleaning the cooktop and surface burners instructions provided in
the following Care & Cleaning section.
26
CARE & CLEANING
Cleaning the cooktop and surface burners
CAUTION
slots
ignition port
To avoid possible burns use care when cleaning the
cooktop. DO NOT attempt to clean the cooktop whenever
the cooktop or burner heads are still hot.
orifice port
To avoid possible burns DO NOT attempt any of the
cleaning instructions provided below before turning OFF
all of the surface burners and allow them to cool.
The cooktop and surface burners are designed to make
cleaning easier. Since cooktop surface burners are sealed,
cleanups are easy when spillovers are cleaned up
immediately. Routinely clean the cooktop. Wipe with a clean,
damp cloth and wipe dry to avoid scratches. The contoured
well areas and burner drip pans (some models) should be
frequently cleaned also.
Keeping the burner head ports and slots clean will prevent
improper ignition and an uneven flame. Refer to the following
sections for further instructions.
To clean the burner head ignition ports
Each burner head has a small ignition port located as
illustrated. Should you experience ignition problems it may be
that this port hole is partially blocked with soil. With the burner
head in place, use a small wire gauge needle or the end of a
paper clip to clear the ignition port.
To clean the surface burner heads
For proper gas flow it may be necessary to clean the burner
head and slots. To clean, first use a clean DAMP cloth to soak
up any spills. Remove any food from between the burner slots
using a small non-abrasive brush like a toothbrush and
afterwards wipe up using a damp cloth. For stubborn soils
located in the slots, use a small-gauge wire or needle to clean.
To clean the recessed and contoured well areas of
the cooktop
If a spill occurs on or in the recessed or contoured areas,
blot up spill with an absorbent cloth. Rinse with a clean,
damp cloth and wipe dry.
To clean the burner grates, burner caps & burner
drip pans (some models)
Use a soap-filled scouring pad or a mild abrasive cleanser
to clean the burner grates, burner caps and surface burner
drip pans (if equipped).
Fig. 1 - Cooktop burner head
IMPORTANT
The surface burner heads are secured to the cooktop
and must be cleaned in place on the cooktop.
For proper flow of gas and ignition of the burner — DO
NOT allow spills, food, cleaning agents or any
other material to enter the gas orifice holder
opening. Always keep the surface burner cap and
surface burner head in place whenever a surface
burner is in use.
Replacing the oven light
The light bulb is located at the rear of the oven and is
covered with a glass shield held by a wire holder. The glass
shield must be in place whenever the oven is in use.
To replace the oven light bulb:
1. Turn electrical power off at the main source or unplug
the range.
2. Press wire holder to one side to release the glass shield
that covers the light bulb.
3. Replace bulb with a new 40 watt appliance bulb.
4. Replace glass shield over bulb and snap wire holder
back into place.
5. Turn power back on again at the main source (or plug
the appliance back in).
6. The clock will then need to be reset. To reset, see
“Setting the clock” in this Use & Care Guide.
CAUTION
Be sure the range is unplugged and all parts are COOL before
replacing oven light. Wear a leather-faced glove for protection
against possible broken glass.
27
CARE & CLEANING
Removing and replacing the lift-off oven door
CAUTION
Oven door
hinge
locations
with oven door
fully open.
The door is heavy. For safe, temporary storage, lay the door
flat with the inside of the door facing down.
To remove oven door:
1. Open oven door completely (horizontal with floor - See
Fig. 1).
2. Pull the door hinge locks on both left and right door
hinges down from the oven frame completely towards
the oven door (See Fig. 2). A tool such as a small flatblade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Fig. 3).
4. Close the door to the broil stop position (the oven door
will stop into this position just before fully closing).
5. With the oven door in the broil stop position, lift the
oven door hinge arms over the roller pins located on
each side of the oven frame (See Fig. 4).
To replace oven door:
1. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Fig. 3).
2. Holding the oven door at the same angle as the removal
position, seat the hook of the hinge arm over the roller
pins located on each side of the oven door frame (See
Fig. 4). The hook of the hinge arms must be fully
seated onto the roller pins.
3. Fully open the oven door (horizontal with floor - See
Fig. 1).
4. Push the door hinge locks up towards and into the oven
frame on both left and right oven door hinges (See Fig.
2) to the locked position.
5. Close the oven door.
Fig. 1
Fig. 2
Special door care instructions - Most oven doors
contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks are
fully in place.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
Fig. 3
Fig. 4
28
Solutions to common problems •
Problem
BEFORE YOU CALL
Solution
Poor baking results.
• Many factors affect baking results. Make sure the proper oven rack position is
used. Center food in the oven and space pans to allow air to circulate. Allow
the oven to preheat to the set temperature before placing food in the oven. Try
adjusting the recipe's recommended temperature or baking time. If you feel
the oven is too hot or cool, see “Adjusting Oven Temperature” section in this
Use & Care Guide.
Entire appliance does not operate.
• The time of day is not set. The time of day must first be set in order to
operate the oven. See “Setting the clock” in the Setting oven controls
section.
• Make sure cord/plug is plugged correctly into outlet.
• Service wiring is not complete. Contact your dealer, installing agent or
authorized service agent.
• Electrical power outage. Check house lights to be sure. Call your local
electric company for service.
Oven portion of appliance does not
operate.
• Be sure the oven controls are set properly for the desired cooking feature.
See Setting Oven Controls in this manual or see “Entire appliance does
not operate” in this checklist.
Surface burners do not ignite.
• Surface control knob was not completely turned to LITE. Push in & turn the
surface control knob to LITE until burner ignites and then turn control knob
to desired flame size.
• Burner ports are clogged. With the burner OFF, use a small-gauge wire or
needle to burner head slots and ignition ports. See “Cleaning the cooktop
and surface burners” in the Care & Cleaning section for additional
cleaning instructions.
• Range power cord is disconnected from outlet (electric ignition models
only). Be sure power cord is securely plugged into the power outlet.
• Electrical power outage (electric ignition models only). Burners can be lit
manually. See section on Setting Surface Controls.
Surface burner flame only part way
around burner cap.
• Burner slots or ports are clogged. With the surface burner OFF, clean ports
with a small-gauge wire or needle.
• Moisture is present after cleaning. Lightly fan the flame & allow burner to
operate until flame is full. Dry the surface burners thoroughly following the
instructions under “Cleaning the cooktop and surface burners” provided in
the Care & Cleaning section.
Surface burner flame is orange.
• Dust particles in main gas line. Allow the burner to operate a few minutes
until flame turns blue. In coastal areas, a slightly orange flame is
unavoidable due to salt air.
Self-cleaning cycle does not work.
• Oven control not set properly. Follow instructions under Self-cleaning.
• Self-Cleaning cycle was interrupted. Follow steps under "Stopping or
Interrupting a Self-cleaning cycle" under Self-cleaning.
29
BEFORE YOU CALL
• Solutions to common problems
Problem
Solution
Soil not completely removed after selfcleaning cycle.
• Failure to clean bottom, front top of oven, frame of oven or door area
outside oven seal. These areas are not in the self-cleaning area, but get hot
enough to burn on residue. Clean these areas before the self-cleaning cycle
is started. Burned-on residue can be cleaned with a stiff nylon brush and
water or a nylon scrubber. Be careful not to damage the oven gasket.
Oven smokes excessively during broiling.
• Incorrect setting. Follow broiling instructions in Setting Oven Controls.
• Make sure oven door closed.
• Meat too close to upper burner. Reposition the broil rack to provide
proper clearance between the meat & the burner. Preheat the oven.
• Meat not properly prepared. Remove excess fat from meat. Cut remaining
fatty edges to prevent curling, but do not cut into lean.
• Broiler pan and insert wrong side up and grease not draining. Always
place grid on the broiler pan with ribs up & slots down to allow grease to
drip into pan (some models).
• Grease has built up on oven surfaces. Regular cleaning is necessary when
broiling frequently. Old grease or food spatters cause excessive smoking.
Flames inside oven or smoking from
oven vent.
• Excessive spillovers in oven. For example this will happen for pie
spillovers or large amounts of grease left on the oven bottom. Wipe up
excessive spillovers before starting oven. If flames or excessive smoke
are present see “Broiling” in the Setting Oven Controls section.
Oven control panel beeps & displays any
F code error (for example F10).
• Oven control has detected a fault or error condition. Press CANCEL to
clear the display & stop beeping. Try the bake or broil feature again. If the
F code error repeats, remove power from appliance, wait 5 minutes and
then repower appliance and set clock for the time of day. Try the bake or
broil feature again. If the fault recurs, record fault and call for service.
Oven light does not work.
• Be sure the light is secure in the socket. Also see “Changing & replacing the
oven light” section.
Appliance is not level.
• Be sure floor is level, strong & stable enough to adequately support range.
• If floor is sagging or sloping, contact a carpenter to correct the situation.
• Poor installation. Place oven rack in center of oven. Place a level on the
oven rack. Adjust leveling legs at base of appliance until the rack is level.
• Kitchen cabinet alignment may make range appear not level. Be sure
cabinets are square & have sufficient room for appliance clearance.
Cannot move appliance easily. Appliance
must be accessible for service.
• Cabinets not square or are built in too tightly. Contact builder or installer to
make appliance accessible.
• Carpet interferes with appliance. Provide sufficient space so appliance can be
lifted over carpet.
30
MAJOR APPLIANCE WARRANTY
Your appliance is covered by a one year limited warranty. For one year from your original date of
purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to
be defective in materials or workmanship when such appliance is installed, used and maintained in
accordance with the provided instructions.
Exclusions
This warranty does not cover the following:
1.
Products with original serial numbers that have been removed, altered or cannot be readily determined.
2.
Product that has been transferred from its original owner to another party or removed outside the USA or
Canada.
3.
Rust on the interior or exterior of the unit.
4.
Products purchased "as-is" are not covered by this warranty.
5.
Food loss due to any refrigerator or freezer failures.
6.
Products used in a commercial setting.
7.
Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances
not in ordinary household use or used other than in accordance with the provided instructions.
8.
Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9.
Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,
etc., which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or
knobs, handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip
charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors,
cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR.
ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS
PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN
LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE
DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO
YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE.
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone
numbers below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances
North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada
Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and
parts under this warranty must be performed by Electrolux or an authorized service company. Product features or
specifications as described or illustrated are subject to change without notice.
If You Need
Service
USA
1.800.944.9044
Electrolux Major Appliances
North America
P.O. Box 212378
Augusta, GA 30907
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
31
This page is left blank intentionally