Operating instructions | Frigidaire 318200880 Range User Manual

Gas R
Slide-in Models
Welcome .................................. 2
Important Safety Instructions .. 3-6
Features at a Glance ............. 7
Setting Surface Controls.. 8-10
Before Setting
Oven Controls ................. 10-11
Setting Oven Controls ......... 11
Cooking Informations ..... 12-13
Care & Cleaning .............. 14-21
Adjusting Your
Oven Temperature ................ 21
Before You Call
Solutions to
Common Problems
........................................... 22-23
Warranty ................ Back Cover
318200880 (0502) Rev. A
Welcome & Congratulations
(United States)
Please attach sales receipt
here for future reference.
Congratulations on your purchase of a new appliance! At Electrolux Home
Products, we are very proud of our product and are completely committed to
providing you with the best service possible. Your satisfaction is our number one
We know you’ll enjoy your new appliance and Thank You for choosing our product.
We hope you consider us for future purchases.
This Use & Care Manual contains general operating instructions for your appliance
and feature information for several models. Your product may not have all the
described features. The graphics shown are representative. The graphics on your
appliance may not look exactly like those shown. These instructions are not
meant to cover every possible condition and situation that may occur. Common
sense and caution must be practiced when installing, operating and maintaining
any appliance.
Please record your model and serial numbers below for future reference.
Model Number:
Serial Number:
Purchase Date:
Product Registration
Register Your Product
be filled in completely, signed and returned to
Electrolux Home Products.
Serial Plate Location
Versión en español
Si desea obtener una copia en español
de este Manual del Usuario, sírvase
escribir a la dirección que se incluye a
continuación. Solicite la P/N
Spanish Use & Care Manual
Electrolux Home Products
P. O. Box 212378
Augusta, GA 30917
Serial Plate
© 2005 Electrolux Canada Corp.
All rights reserved
Printed in United States
Important Safety Instructions
Read all instructions before using this appliance.
Save these instructions for future reference.
This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all
instructions given.
This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.
This symbol will help alert you to situations that may cause bodily injury or property damage.
If the information in this manual is not
followed exactly, a fire or explosion may result causing
property damage, personal injury or death.
— Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
phone in your building.
• Immediately call your gas supplier from a neighbor's
phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
— Installation and service must be performed by a
qualified installer, servicer or the gas supplier.
All ranges can tip.
Injury to persons could result.
Install anti-tip device packed with range.
See Installation Instructions.
To reduce the risk of
tipping, the range must be secured
by properly installed anti-tip
bracket(s) provided with the range.
To check if the bracket(s) is installed
properly, remove the lower panel or
storage drawer and verify that the
anti-tip bracket(s) is engaged. Refer
to the Installation Instructions for
• Never modify or alter the construction of a range by
removing leveling legs, panels, wire covers, anti-tip
brackets/screws, or any other part of the product.
• Remove all tape and packaging before using the
range. Destroy the carton and plastic bags after
unpacking the range. Never allow children to play with
packaging material.
Stepping, leaning or sitting on the door
or drawer of this range can result in serious injuries
and also cause damage to the range. Do not allow
children to climb or play around the range. The weight of a
child on an open door may cause the range to tip, resulting
in serious burns or other injury.
• Proper Installation-Be sure your appliance is properly
installed and grounded by a qualified technician in
accordance with the National Fuel Gas Code ANSI
Z223.1 latest edition, and National Electrical Code
ANSI/NFPA No. 70 latest edition, and local code
requirements. Install only per installation instructions
provided in the literature package for this range.
Do not use the oven or warmer drawer (if
equipped) for storage.
Ask your dealer to recommend a qualified technician and an
authorized repair service. Know how to disconnect the electrical power to the appliance at the circuit breaker or fuse
box in case of an emergency.
Do not store items of interest to children
in the cabinets above a range. Children climbing on the
range to reach items could be seriously injured.
• User servicing—Do not repair or replace any part of
the appliance unless specifically recommended in
the manuals. All other servicing should be done only by
a qualified technician, This may reduce the risk of
personal injury and damage to the range.
Never use your appliance for warming up
or heating up the room.
Important Safety Instructions
IMPORTANT—Do not attempt to operate the oven
during a power failure. If the power fails, always turn
off the oven. If the oven is not turned off and the power
resumes, the oven may begin to operate again. Once the
power resumes, reset the clock and oven function.
• Storage in or on Appliance—Flammable materials
should not be stored in an oven, near surface burners
or in the drawer (if equipped). This includes paper,
plastic and cloth items, such as cookbooks, plasticware
and towels, as well as flammable liquids. Do not store
explosives, such as aerosol cans, on or near the appliance.
Flammable materials may explode and result in fire or
property damage.
Electronic controllers can be damaged
by cold temperatures. When you use your appliance
for the first time, or if it has not been used for a long
period of time, make sure that it has been exposed to a
temperature above 0°C/32°F for at least 3 hours before
connecting it to the power supply.
• Do not leave children alone—Children should not be
left alone or unattended in the area where appliance
is in use. They should never be allowed to sit or stand
on any part of the appliance.
SURFACES OF THE OVEN. Both surface burners and
oven burners may be hot even though flames are not
visible. Areas near surface burners may become hot
enough to cause burns. During and after use, do not
touch, or let clothing or other flammable materials touch
these areas until they have had sufficient time to cool.
Among these areas are the cooktop, surfaces facing the
cooktop, the oven vent openings and surfaces near
these openings, oven door and window.
Use proper flame size—Adjust flame size
so it does not extend beyond the edge of the utensil. The
use of undersized utensils will expose a portion of the
burner flame to direct contact and may result in ignition of
clothing. Proper relationship of utensil to flame will also
improve efficiency.
• Wear proper apparel—Loose-fitting or hanging
garments should never be worn while using the
appliance. Do not let clothing or other flammable
materials contact hot surfaces.
Do not use stove top grills on the burner
grates of sealed gas burners. If you use a stove top grill
on a sealed gas burner, it will cause incomplete
combustion and can result in exposure to carbon
monoxide levels above allowable current standards. This
can be hazardous to your health.
• Do not use water or flour on grease fires—Smother
the fire with a pan lid, or use baking soda, a dry
chemical or foam-type extinguisher.
• Know which knob controls each surface burner.
Place a pan of food on the burner before turning it on,
and turn the burner off before removing the pan.
• When heating fat or grease, watch it closely. Fat or
grease may catch fire if allowed to become too hot.
• Always turn the knob to the full LITE position when
igniting top burners. Visually check that burner has lit.
Then adjust the flame so it does not extend beyond the
edge of the utensil.
In case of fire or gas leak, be sure to
turn off the main gas shutoff valve.
• Use proper pan size. This appliance is equipped with
one or more surface burners of different sizes. Select
utensils having flat bottoms large enough to cover the
surface burner. The use of undersized utensils will
expose a portion of the surface burner to direct contact
and may result in ignition of clothing. Proper relationship
of utensil to the surface burner will also improve
• Use only dry potholders—Moist or damp potholders
on hot surfaces may result in burns from steam. Do
not let potholders touch hot heating burners. Do not
use a towel or other bulky cloth instead of a potholder.
• Do not heat unopened food containers—Buildup of
pressure may cause container to burst and result in
• Remove the oven door from any unused range if it
is to be stored or discarded.
• Utensil handles should be turned inward and not
extend over adjacent surface burners. To reduce the
risk of burns, ignition of flammable materials, and
spillage due to unintentional contact with the utensil, the
handle of the utensil should be positioned so that it is
turned inward, and does not extend to adjacent surface
Important Safety Instructions
• Keep oven vent ducts unobstructed. The oven vent is
located at the center rear of the cooktop. Touching the
surfaces in this area when the oven is operating may
cause severe burns. Also, do not place plastic or heatsensitive items on or near the oven vent. These items
could melt or ignite.
• Never leave surface burners unattended at high heat
settings—Boilovers cause smoking and greasy
spillovers that may ignite, or a pan that has boiled dry
may melt.
• Protective liners—Do not use aluminum foil to line
surface burner pans, or oven bottom, except as
suggested in this manual. Improper installation of these
liners may result in risk of electric shock, or fire.
• Placement of oven/warmer drawer (if equipped)
racks. Always place oven racks in desired location
while oven/warmer drawer (if equipped) is cool. If rack
must be moved while oven is hot use extreme caution.
Use potholders and grasp the rack with both hands to
reposition. Do not let potholders contact the hot heating
elements in the oven/warmer drawer (if equipped).
Remove all utensils from the rack before moving.
• Glazed cooking utensils—Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for range top service without
breaking due to the sudden change in temperature.
Check the manufacturer’s recommendations for cooktop
• Do not use the broiler pan without its insert. The
broiler pan and its insert allow dripping fat to drain and
be kept away from the high heat of the broiler.
• Do not use Searing Grill on the cooktop. The searing
grill is not designed for use on the cooktop. Doing so
may result in a fire.
• Do not cover the broiler insert with aluminum foil.
Exposed fat and grease could ignite.
• Do not use decorative surface burner covers. If a
burner is accidentally turned on, the decorative cover
will become hot and possibly melt. Burns will occur if
the hot covers are touched. Damage may also be done
to the cooktop or burners because the covers may
cause overheating. Air will be blocked from the burner
and cause combustion problems.
• Do not touch a hot light bulb with a damp cloth.
Doing so could cause the bulb to break. Disconnect the
appliance or turn off the power to the appliance before
removing and replacing light bulb.
• Do not clean or operate a broken cooktop—If cooktop
should break, cleaning solutions and spillovers may
penetrate the broken cooktop and create a risk of
electric shock. Contact a qualified technician
• Clean the range regularly to keep all parts free of
grease that could catch fire. Exhaust fan ventilation
hoods and grease filters should be kept clean. Do not
allow grease to accumulate on hood or filter. Greasy
deposits in the fan could catch fire. When you are
flaming food under the hood, turn the fan on. Refer to the
hood manufacturer’s instructions for cleaning.
• Clean cooktop glass with caution—If a wet sponge or
cloth is used to wipe spills on a hot cooking area, be
careful to avoid a steam burn. Some cleaners can
produce harmful fumes if applied to a hot surface.
• Kitchen cleaners and aerosols—Always follow the
manufacturer’s recommended directions for use. Be
aware that excess residue from cleaners and aerosols
may ignite causing damage and injury.
• Avoid scratching the cooktop glass with sharp
• In the self-Cleaning cycle only clean the parts listed
in this Use and Care Guide. Before self-cleaning the
oven, remove the broiler pan and any utensils or foods
from the oven.
• Use care when opening oven door or warmer drawer
(if equipped)—Stand to the side of the range when
opening the door of a hot oven. Let hot air or steam
escape before you remove or replace food in the oven/
warmer drawer.
• Do not use oven cleaners—No commercial oven
cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven.
Important Safety Instructions
• Do not clean door gasket—The door gasket is
essential for a good seal. Care should be taken not to
rub, damage or move the gasket.
Important Safety Notice
The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth
defects or other reproductive harm, and requires
businesses to warn customers of potential exposure to
such substances.
• Remove oven racks. Oven racks color will change if left
in the oven during a self-cleaning cycle.
The health of some birds is extremely
sensitive to the fumes given off during the selfcleaning cycle of the range. Move the birds to another
well ventilated room.
Grounding Instructions
For personal safety, the cooktop must be properly grounded. For
maximum safety, the power cord must be plugged into an electrical
outlet that is correctly polarized and properly grounded.
DO NOT Operate the cooktop using a 2-prong adapter or an extension
cord. If a 2-prong wall receptacle is the only available outlet, it is the
personal responsibility of the consumer to have it replaced with a
properly grounded 3-prong wall receptacle installed by a qualified
See the INSTALLATION INSTRUCTIONS packaged with this cooktop
for complete installation and grounding instructions.
This appliance is equipped with a 3-prong grounding
plug for your protection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove the
grounding prong from this plug.
Grounding type
wall receptacle
Do not, under any
cut, remove, or
bypass the
grounding prong.
Power supply cord with
3-prong grounding plug
Avoid fire hazard or electrical shock.
DO NOT use an adapter plug, an extension cord, or
remove grounding prong from electrical power cord.
Failure to follow this warning can cause serious injury,
fire or death.
Conversion to Liquefied Petroleum Gas (or L.P. Gas)
Personal injury or death from electrical shock
may occur if the range is not installed by a qualified installer
or electrician.
This natural gas range is designed to allow for conversion to
Liquefied Petroleum (L.P.) Gas.
If L.P. conversion is needed, contact the service center for
assistance. The L.P. Conversion Kit is provided with this range
and is located on the right panel (right side) of the range. Before
installing the kit be sure to follow the L.P. Installation Instructions
Any additions, changes or conversions
required in order for this appliance to satisfactorily meet the
application needs must be made by an authorized Service
Features At A Glance
Electronic Oven Controls
with Clock and Kitchen Timer
Surface Burner
Control Knobs
Cast Iron Grates
Self-Cleaning Oven
Oven Light
(2) Adjustable
Oven Racks
One Piece
Door Handle
Glass Front Oven
Door with Large
Window Opening
Broil Pan
Storage Drawer
Oven Vent
9,500 BTU or
12,000 BTU
Sealed Burner
LP convertible
5,000 BTU
Sealed Burner
(LP convertible)
Removable Surface Burner
Grates (Styles and color
will vary by model)
12,000 BTU or
14,000 BTU
Sealed Burner
(LP convertible)
9,500 BTU
Sealed Burner
LP convertible
Glass or Porcelain Cook Top
Note: The features of your range will vary
according to model.
Setting Surface Controls
Sizes of the Surface Gas
Your appliance is supplied with the 4
different surface gas burners:
• 1 Simmer Burner (5,000 BTU)
• 1 or 2 Standard Burners (9,500 BTU)
• 1 Power Burner (12,000 BTU)
• 1 Power Burner (14,000 BTU)
Burner Cap
(Standard or
Extra Large)
Standard or “POWER” Burner Head
(9,500 BTU) or (12,000 BTU)
Burner Cap
When setting up the range for
the first time, make sure that the
correct Burner Heads, Burner
Caps and Burner Grates are
located as shown in Figure 1.
Left Rear
Burner Head
(9,500 BTU)
Left Front
Orifice Holder
Extra Large
Burner Cap
Burner Head
(12,000 BTU)
or (14,000 BTU)
Small Burner Cap
Burner Head
(5,000 BTU)
Right Rear
Orifice Holder
Right Front
Orifice Holder
Figure 1
Assembly of the Surface Burner Heads, Burner Caps,
Burner Grates and Flue Covers
Cap Pilot
Electrode must be
located properly in slot
of each Burner Head
Figure 2
Flue Covers
Inner Vent
Figure 3
It is very important to make sure that all of the Surface Burner Heads,
Surface Burner Caps and Surface Burner Grates are installed correctly and
at the correct locations.
1. Place all 4 Burner Heads in the correct locations (See Figure 1). Make
sure that the correct Burner Head is placed with the corresponding
Orifice Holder and that the Electrode is located properly in the slot of
each Burner Head (See Figure 2). Proper Burner Head placement
insures that each Burner will have the correct spark required for surface
gas ignition.
2. Place the correct Burner Caps at each of the burner locations (Burner
Cap Pilot Hole must face up). Each of the 4 (four) Burner Heads MUST
have a Burner Cap installed to insure proper ignition and gas flame size
and must be in place with the Pilot Hole facing up BEFORE placing the
Burner Grates (See Figure 2).
3. Place the 2 (two) cast iron Burner Grates supplied with the range.
Carefully lineup the 2 Grate Pins on each Grate with the Cap Pilot Holes
in the 2 Burner Caps on each side of the range. DO NOT force the
Burner Grates onto the Burner Caps. Forcing the grates down onto
improperly installed Burner Heads and Burner Caps may damage the
gas burners. Each Burner Cap is designed with a Cap Pilot Hole in the
top center of the Cap. Visually check that ALL the Grate Pins line up
into the Burner Cap Pilot Holes (See Figure 2). Properly installed
Burner Grates will rest with all four Grate legs on the glass cooktop.
4. Place the 2 (two) flue covers over the inner vent cover as shown on
figure 3.
OPENING. Always keep the Burner Caps and Burner Heads in place
whenever the surface burners are in use.
Setting Surface Controls
Control Locations of the Gas Surface Burners
Your range is equipped with gas surface burners with 3
different BTU ratings. The ability to heat food quicker and
in larger volumes increases as the burner size increases.
The small SIMMER burner is best used for simmering
delicate sauces, etc. This burner is located at the right rear
burner position on the cooktop (see figure 1).
The STANDARD burners can be used for most surface
cooking needs. The 2 burners are located at the left front and
rear burner positions on the cooktop (see figure 1).
The POWER burner is best used for bringing large quantities
of liquid rapidly up to temperature or when preparing larger
quantities of food. The POWER burner is located at the left
front burner position on the cooktop (see figure 1).
Regardless of size, always select cookware that is suitable
for the amount and type of food being prepared. Select a
burner and flame size appropriate to the pan. Never allow
flames to extend beyond the outer edge of the pan.
Figure 1
Operating the Gas Surface Controls:
1. Place cooking utensil on surface burner.
2. Push the surface control knob down and turn counterclockwise out of the OFF
3. Release the knob and rotate to the LITE position (see figure 2). Note: All four
electronic surface ignitors will spark at the same time. However, only the burner you
are turning on will ignite.
4. Visually check that the burner has a flame.
5. Turn the control knob counterclockwise to the desired flame size. The control
knobs do not have to be set at a particular setting. Use the knob indicator settings
to adjust the flame as needed. DO NOT cook with the surface control knob in the
LITE position. (The electronic ignitor will continue to spark if the knob is left in the
LITE position.)
Figure 2
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on
top of the range when it is in use. These items could melt or ignite. Potholders, towels or wood spoons could catch fire
if placed too close to a flame.
In the event of an electrical power outage, the surface burners can be lit manually. To light a surface burner, hold a lit match
to the burner head, then slowly turn the surface control knob to LITE. After burner lights turn the knob to desired setting. Use
caution when lighting surface burners manually.
Setting Surface Controls
Setting Proper Surface Burner Flame Size
For most cooking - start on the highest control setting and then turn to a lower
one to complete the process. Use the recommendations below as a guide for
determining proper flame size for various types of cooking. The size and type of
utensil used and the amount of food being cooked will influence the setting needed.
*Flame Size
High Flame
Medium Flame
Low Flame
Never extend the flame beyond the outer
edge of the utensil. A higher flame simply
wastes heat and energy, and increases
the risk of being burned by the gas flame.
Type of Cooking
Start most foods; bring water to a boil; pan broiling.
Maintain a slow boil; thicken sauces, gravies; steaming.
Keep foods cooking; poach; stewing.
For deep fat frying - use a thermometer and adjust the surface control knob
accordingly. If the fat is too cool, the food will absorb the fat and be greasy. If the
fat is too hot, the food will brown so quickly that the center will be undercooked.
Do not attempt to deep fat fry too much food at once as the food will neither brown
nor cook properly.
*Note: Settings are based on using medium-weight metal or aluminum pans. Settings may vary when using other types
of pans. The color of the flame is the key to proper burner adjustment. A good flame is clear, blue and hardly visible in a welllighted room. Each cone of flame should be steady and sharp. Adjust or clean burner if flame is yellow-orange.
Before Setting Oven Controls
Air Circulation in the Oven
If using 1 rack, place in center of oven. If using multiple racks, stagger
cookware as shown.
For best air circulation and baking results allow 2-4" (5-10 cm) around the
cookware for proper air circulation and be sure pans and cookware do not touch
each other, the oven door, sides or back of the oven cavity. The hot air must
circulate around the pans and cookware in the oven for even heat to reach
around the food.
1 Oven Rack
Multiple Oven Racks
Before Setting Oven Controls
Some models are equipped with a blower which runs in baking and self-cleaning mode to keep
all internal components at a cool temperature. It is possible that the blower keeps running even if the range has
been turned off, until the components have cooled down.
Arranging Oven Racks
mitts when the oven is hot.
Oven Vent Location
The oven vent is located in the center
rear on the cooktop. When the oven is
on, warm air passes through the vent.
This venting is necessary for proper air
circulation in the oven and good baking
Never close off the openings with
aluminum foil or any other material.
Removing and Replacing Oven
To remove, pull the rack forward until it
stops. Lift up front of rack and slide out.
To replace, fit the rack onto the guides
on the oven walls. Tilt the front of the
rack upward and slide the rack back into
Arranging Oven Racks
To bake on a single rack, place the
rack in position 2 or 3. To bake on 2
racks, place the racks in positions 2
and 3.
Rack position
Broiling meats, chicken or fish
1 or 2
Cookies, cakes, pies, biscuits &muffins
2 or 3
Frozen pies, angel food cake, yeast, bread,
casseroles, small cuts of meat or poultry
Turkey, roast or ham
Note: Always use caution when removing food.
Setting Oven Controls
Refer to the Electronic Oven Control Guide for oven settings.
Cooking Informations
Oven Baking
For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc... There is no need to
preheat the oven for roasting meat or baking casseroles.
The cooking times and temperatures needed to bake a product may vary slightly from your previously owned appliance.
Baking Problems and Solutions Chart
Cookies and biscuits burn on the
• Cookies and biscuits put into
the oven before the preheating
time is completed.
• Oven rack overcrowded.
• Allow oven to preheat to the selected temperature before placing food in oven.
• Dark pan absorbs heat too fast.
• Choose pan sizes that will permit 5.1 cm to 10.2 cm (2”
to 4”) of air space on all sides when placed in the oven.
• Use a medium-weight aluminum baking sheet.
Cakes too dark on
top or bottom.
• Cakes put into the oven before
preheating time is completed.
• Rack position too high or low.
• Oven too hot.
• Allow oven to preheat to the selected temperature before placing food in the oven.
• Use proper rack position for baking needs.
• Set oven temperature 25°F/12°C lower than recommended.
Cakes not done in
the center.
• Oven too hot.
• Set oven temperature 25°F/12°C lower than recommended.
• Use pan size suggested in recipe.
• Use proper rack position and place pan so there is 5.1
cm to 10.2 cm (2” to 4”) of space on all sides of pan.
• Incorrect pan size.
• Pan not centered in oven.
Cakes not level.
• Range not level.
• Pan too close to oven wall or
rack overcrowded.
• Pan warped.
Foods not done
when cooking time
is up.
• Oven too cool.
• Oven overcrowded.
• Oven door opened too frequently.
• Place a marked glass measuring cup filled with water
on the center of the oven rack. If the water level is uneven, refer to the installation instructions for leveling
the range.
• Be sure to allow 5.1 cm to 10.2 cm (2” to 4”) of clearance on all sides of each pan in the oven.
• Do not use pans that are dented or warped.
• Set oven temperature 25°F/12°C higher than suggested
and bake for the recommended time.
• Be sure to remove all pans from the oven except the
ones to be used for baking.
• Open oven door only after shortest recommended baking time.
Cooking Informations
Broiling is a method of cooking tender cuts of meat by direct heat under the broil element of the oven.
Preheating is suggested when searing rare steaks. (Remove the broiler pan before preheating. Foods will stick if placed on hot
metal.) To preheat, set the control(s) to BROIL as instructed in the Owner's Guide. Wait for the element to become red-hot,
usually about 2 minutes. Preheating is not necessary when broiling meats well-done.
To Broil
Broil on side until the food is browned; turn and cook on the second side. Season and serve. Always pull rack out to the "stop"
position before turning or removing food.
Determine Broiling Times
Broiling times vary, so watch the food closely. Time not only depends on the distance from element, but on the thickness and
aging of meat, fat content and doneness preferred. The first side usually requires a few minutes longer than second. Frozen
meats also require additional time.
Broiling Tips
The broiler pan and it grid allow dripping grease to drain and be kept away from the
high heat of the broiler.
DO NOT use the pan without its grid. DO NOT cover the grid with foil. The
exposed grease could ignite.
Should an oven fire occur, close the oven door and turn off the
oven. If the fire continues, throw baking soda on the fire or use fire extinguisher. DO
NOT put water or flour on the fire. Flour may be explosive.
Broiler Clean-Up Tips:
To make cleaning easier, line the bottom of the broiler pan with aluminum foil. DO
Broiler Pan
NOT cover the broiler grid with foil.
To prevent grease from baking on, remove the broiler pan from the oven as soon as
cooking is completed. Use hot pads because the broiler pan is extremely hot. Pour off grease. Soak the pan in HOT, soapy
Clean the broiler pan as soon as possible after each use. If necessary, use soap-filled steel wool pads. Heavy scouring may
scratch the grid.
Care & Cleaning
Self-Cleaning Oven
During the Self-Cleaning
cycle, the outside of the range can become
very hot to the touch. DO NOT leave small
children unattended near the appliance.
The health of some birds
is extremely sensitive to the fumes given
off during the Self-Cleaning cycle of any
range. Move birds to another well-ventilated
DO NOT line the oven
walls, racks, bottom or any other part of the
range with aluminum foil. Doing so will
destroy heat distribution, produce poor
baking results and cause permanent
damage to the oven interior (aluminum foil
will melt to the interior surface of the oven).
DO NOT force the oven
door open. This can damage the automatic
door locking system. Use caution when
opening the door after the Self-Cleaning
cycle is completed. The oven may still be
A Self-Cleaning oven cleans itself with high temperatures (well above cooking
temperatures) which eliminate soils completely or reduces them to a fine
powdered ash you can wipe away with a damp cloth.
Adhere to the following cleaning precautions:
• DO NOT use oven cleaners or oven protective coatings in or around any part
of the Self-Cleaning oven.
• DO NOT clean the oven door gasket. The woven material of the oven door
gasket is essential for a good seal. Care should be taken not to rub, damage
or remove the gasket.
• DO NOT use any cleaning materials on the oven door gasket. Doing so
could cause damage.
• Remove the broiler pan and insert, all utensils and any aluminum foil.
These items cannot withstand high cleaning temperatures.
• Oven racks do not have to be removed. If they are not removed during the
Self-Clean cycle their color will turn slightly blue and the finish will be dull.
After the cycle is complete and the oven has cooled, rub the sides of the
oven racks with wax paper or a cloth containing a small amount of salad
oil (this will make the racks glide easier into the rack position).
• Remove any excessive spillovers in the oven cavity before starting the
Self-Cleaning cycle. To clean, use hot, soapy water and a cloth. Large
spillovers can cause heavy smoke or fire when subjected to high
temperatures. DO NOT allow food spills with a high sugar or acid content
(such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on
the surface as they may leave a dull spot even after cleaning.
• Clean any soil from the oven frame, the door liner outside the oven door
gasket and the small area at the front center of the oven bottom. These
areas heat sufficiently to burn soil on. Clean with soap and water.
NOTE: Prior to setting the Self-Clean cycle, any spills remaining on the oven
bottom should be removed.
What to Expect during Cleaning:
While the oven is in operation, the oven heats to temperatures much higher
than those used in normal cooking. Sounds of metal expansion and contraction are normal. Odor is also normal as the food soil is being removed.
Smoke may appear through the oven vent.
If heavy spillovers are not wiped up before cleaning, they may flame and
cause more smoke and odor than usual. This is normal and safe and should
not cause alarm. If available, use an exhaust fan during the self-cleaning
NOTE: A smoke eliminator in the oven vent converts most of the soil into a
colorless vapor.
Note: See additional cleaning information
for the oven door in the General Care &
Cleaning section.
To Set the Self-Clean Cycle
Refer to the Oven Control Guide for Self-Clean Cycle settings.
Care & Cleaning
(Cleaning Chart)
How to Clean
Aluminum (trim pieces) &
Use hot, soapy water and a cloth. Dry with a clean cloth.
Glass, Painted and Plastic
Body Parts, Control Knobs &
Decorative Trim Pieces
For general cleaning, use hot, soapy water and a cloth. For more difficult soils and builtup grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60
minutes. Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of these
materials; they can scratch.
Control Panels
Before cleaning the control panel, turn all controls to OFF and remove the control knobs.
To remove, pull each knob straight off the shaft. Clean as instructed above. Squeeze
excess water from the cloth before wiping the panel; especially when wiping around the
controls. Excess water in or around the controls may cause damage to the appliance. To
replace knobs after cleaning, line up the flat sides of both the knob and the shaft; then
push the knob into place.
Porcelain Enamel
Burner Grates, Cooktop
Surface, Below Cooktop,
Broiler Pan & Insert, Door
Liner, Oven Bottom & Burner
Drip Pans
Clean burner grates, broiler pan and insert in the dishwasher and dry upon removal. If soils
are not removed, follow the cooktop cleaning instructions below.
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a 1:1
solution of clear water and ammonia. If necessary, cover difficult spots with an ammoniasoaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, then
scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth. Remove all
cleaners or the porcelain may become damaged during future heating. DO NOT use spray
oven cleaners on the cooktop.
Stainless Steel (some
models) Oven door & drawer
front panel
Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water and
a cloth. Do not use cleaners with high concentrations of chlorides or chlorines. Do
not use harsh scrubbing cleaners. Only use kitchen cleaners that are especially made
for cleaning stainless steel. Always be sure to rinse the cleaners from the surface as
bluish stains may occur during heating that cannot be removed.
Oven Racks
Remove racks. See "To remove and to replace an oven rack" under Oven vent(s) and
racks. Use a mild, abrasive cleaner, following manufacturer's instructions. Rinse with
clean water and dry. After cleaning the racks, rub the sides of the racks with wax paper
or a cloth containing a small amount of baby oil or salad oil (this will make the racks glide
easier into the rack positions).
Oven Door
Use soap & water to thoroughly clean the top, sides and front of the oven door. Rinse well.
You may use a glass cleaner on the outside glass of the oven door. DO NOT immerse
the door in water. DO NOT spray or allow water or the glass cleaner to enter the door
vents. DO NOT use oven cleaners, cleaning powders or any harsh abrasive cleaning
materials on the outside of the oven door.
DO NOT clean the oven door gasket. The oven door gasket is made of a woven material,
on Self-Cleaning models, which is essential for a good seal. Care should be taken not to
rub, damage or remove this gasket.
Care & Cleaning
Ceramic Glass Cooktop Cleaning and Maintenance (Some models)
Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop
Special Caution for Aluminum Foil and Aluminum Cooking Utensils
1) Aluminum foil
Use of aluminum foil will damage the cooktop. Do not use under any circumstances.
2) Aluminum utensils
The melting point of aluminum being much lower than that of other metals, care must be taken when aluminum pots or
pans are used. If allowed to boil dry, not only will the utensil be ruined, but also permanent damage in the form of breakage,
fusing or marking may affect the ceramic glass surface.
Sliding aluminum or copper clad bottom pans on the cooktop can cause metal markings on the cooktop surface. These
marks should be removed immediately after the cooktop has cooled using the cooktop cleaning cream. Metal marks can
become permanent if not removed prior to future use.
Cookware (cast iron, metal, ceramic or glass) with rough bottoms can mark or scratch the cooktop surface. Do not slide
anything metal or glass across the cooktop. Do not use your cooktop as a cutting board or work surface in the kitchen.
Do not cook foods directly on the cooktop surface without a pan. Do not drop heavy or hard objects on the glass cooktop,
they may cause it to crack.
Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL.
DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can
chemically damage the ceramic-glass surface.
Things to Remember
1. AVOID using bleach and don’t use ammonia to clean the
ceramic surface.
2. Do not put plastic items on warm cooking areas.
3. Never slide oven racks across cooktop surface. They may
scratch or metalmark the cooktop.
4. If cooktop should break, do not use cooktop or attempt to
clean it. Call your authorized service technician immediately.
5. Never use a trivet or metal stand between the cooking utensil
and the ceramic cooktop. The ceramic surface may be
scratched, metal marked or etched by such items.
6. Sugary spills can cause pitting of your cooktop surface.
Therefore, you must begin cleaning the spills while the cooktop
is still hot. Use caution when following the steps below.
a) Turn off all surface units and remove all pans immediately.
b) Wearing an oven mitt, use a razor blade scraper to scrape
the hot spill out of the cooking zone to a cooler area on the
c) Allow the cooktop to cool.
Care & Cleaning
Ceramic Glass Cooktop Cleaning and Maintenance (Some models)
Use and Care of Glass Surface
To Prevent
To Remove
Fine "brown lines
(tiny scratches or
abrasion which
have collected
Coarse particles (salt, sand, or
grit) between bottom of cookware and cooktop that are not removed before cooking.
Using incorrect cleaning materials.
Clean cooktop after every
Use cleaner creme daily.
Tiny scratches are not removable.
They can be minimized by continual
use of cleaner creme. Such scratches
do not affect cooking.
Metal marking
(mark or black
Sliding or scraping metal utensils or oven shelves across
Do not slide cookware
across cooktop.
Apply cleaner creme with dampened
paper towel to a cooled surface.
Brown streaks
and specks.
Cleaning with a sponge or dishcloth that has been used for
other kitchen tasks.
Use cleaner creme with
clean damp paper towel.
Use a small amount of cleaner creme
with clean, damp paper towel.
NOTE: Due to the high intensity of heat generated by the surface elements, the glass surface will turn green when the
element will be turned off. This phenomenon is normal and the glass will come back to its original white color after it
has completely cooled down. (White glass cooktops only).
Cleaning Materials for Ceramic Glass Cooktop
Some cleaning materials may contain an ingredient which can damage the cooktop. Use
recommended materials only (see below). Cleaner cream should be used regularly. Prior to using
your cooktop for the first time, apply a cleaner cream to the ceramic surface. A sample of CERAMA
BRYTE® cleaner cream is supplied with your range. More are available in stores if needed.
Use only recommended cleaning products and follow these basic cleaning suggestions.
1. BEFORE THE COOKTOP IS USED. Thoroughly clean and saturate the cooktop with cleaner
a) Dampen clean paper towel and clean unit.
b) Wipe off with another clean, damp paper towel; then wipe dry.
2. For normal daily cleaning, apply a dab of cleaner cream in the center of each unit-area to be
cleaned. Start with approximately 1/8 teaspoon. (Apply more if needed). Then, proceed as stated
above in (a and b).
3. Make sure bottom of cookware and cooking area are clean and dry.
4. Select heat settings and cookware large enough for food and liquid. This stops boilovers and
5. Wipe up food spills and spatters before they burn into surface.
IMPORTANT Regularly use cleaner cream. If you run out of cleaner cream, use one of the cleaners listed. Be sure to get a new supply of cleaner cream.
Never mix cleaning products! Mixtures may interact, with damaging or hazardous
(Cleaner cream for
ceramic cooktops)
Care & Cleaning
Ceramic Glass Cooktop Cleaning and Maintenance (some models)
Use and Care of Glass Surface
Do Use on Ceramic Glass Cooktop
1. Baking soda.
2. Non-impregnated plastic and nylon pads.
3. For burned on material, scrape with single-edged razor blade, held at a 30° angle.
4. Ceramic glass cleaning cream.
5. CERAMA BRYTE® cleaner cream.
Do not Use on Ceramic Glass Cooktop
1. Avoid pads, that can leave marks and scratches.
2. Avoid heavy-duty cleansing powders, these can scratch, depending on their abrasiveness and cleaning pressure applied.
3. Avoid chemical oven cleaners. These can etch the cooktop surface and are caustic.
4. Avoid rust stain removers containing hydrofluoric acid.
5. Avoid using bleach and don’t use ammonia.
Special Cleaning Instructions for Mineral Deposits and Discolorations
Problem: A gray brown stain that is not removed when using cleaner cream.
Cause: Condensation, when cooking, often collects and drips from cookware. The minerals found in water supply and foods
may cause a gray or brown film to develop on cooktop. This film is so thin it cannot be felt and appears to be under
To Prevent: Daily and proper use of cleaner cream.
To Remove:
– Wet surface with water and sprinkle on cleaner cream.
– Scrub with clean, damp paper towel until stain disappears.
– Clean remaining paste away with damp paper towel.
– Apply dab of cleaner cream and polish with a clean paper towel.
– Do not use cleansers on a heated surface. Fumes could be hazardous. Wait for area to cool before cleaning.
– Do not use cleaner cream to clean porcelain, paint or aluminium.
Care & Cleaning
Cleaning the Burner Grates, Burner Caps, Burner Heads
The Burner Grates, Burner Caps, and Burner Heads should be routinely cleaned.
Keeping the burner ports clean will prevent improper ignition and an uneven flame
at each burner position. Refer to the following instructions:
To Remove and Replace the Surface Burner Grate, Surface Burner Cap and
Surface Burner Head - Remove in the following order; (1st) Surface Burner Grate,
(2nd) Surface Burner Cap, (3rd) Surface Burner Head (See Figure 1).
2nd Cap
3rd Burner
Figure 1
Surface Burner
Reverse the procedure above to replace the Surface Burner Cap, Surface Burner
Head and Surface Burner Grate. Do not remove any burner parts from the
cooktop until the burner parts have completely cooled and are safe to handle.
Do not operate the surface burners without the Surface Burner Caps, Surface
Burner Heads and Surface Burner Grates properly in place.
To Clean the Burner Caps, Burner Heads and Grates - Use a soap-filled scouring
pad or a mild abrasive cleanser to clean the surface burner caps and surface burner
heads. The Grates and the outer vent covers are designed to be Dishwasher safe
for cleaning. The ports (or slots) around the burner heads must be routinely cleaned.
If residue still remains in these ports, use a small-gauge wire or needle to clean the
slots or holes. For proper flow of gas and ignition of the burner—DO NOT ALLOW
THE GAS ORIFICE HOLDER OPENING. ALWAYS keep the surface burner cap
and surface burner head in place whenever a surface burner is in use.
Surface Burner
Surface Burner
Outer Vent
THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.
THE INNER VENT IS NOT REMOVABLE. Do not attempt to remove the inner vent cover.
Use caution when replacing the burner cap so the electrode is not damaged. This may cause a delayed ignition
or prevent the burner from igniting.
Any additions, changes or conversions required in order for this appliance to perform satisfactorily must be
made by authorized servicer.
Care & Cleaning
Care and Cleaning of Stainless Steel (Stainless Steel models only)
Some models are equipped with stainless steel exterior parts. Special care and cleaning are
required for maintaining the appearance of stainless parts. Please refer to the table provided
at the beginning of the General Care & Cleaning section in this Use & Care Guide.
Removing and Replacing the Oven Door
The door is heavy. For safe, temporary storage, lay the door flat with the inside
of the door facing down.
Lock engaged
for door removal
Figure 1
To Remove Oven Door:
1. Open the door to the fully opened position.
2. Pull up the lock located on both hinge supports and engage it in the hinge levers
(Figure 1). You may have to apply a little downward pressure on the door to pull the
locks fully over the hooks.
3. Grab the door by the sides, pull the bottom of the door up and toward you to disengage
the hinge supports. Keep pulling the bottom of the door toward you while rotating the top
of the door toward the range to completely disengage the hinge levers (Figure 2).
4. To clean oven door, follow the instructions provided in the General Care & Cleaning
To Replace Oven Door:
Door removed from the range 1. Grab the door by the sides; place the hinge supports in the hinge slots. Open the door to
the fully opened position.
Figure 2
2. Disengage the lock from the hinge levers on both sides (Figure 3).
Note: Make sure the hinge supports are fully engaged before unlocking the hinge levers.
3. Close the oven door.
Lock in normal
Figure 3
Special Door Care Instructions - Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks are fully in place.
2. Do not hit the glass with pots, pans, or any other object.
3. Scratching, hitting, jarring or stressing the glass may weaken its structure causing an
increased risk of breakage at a later time.
Removing and Replacing the External Door Glass Panel
Applicable only to models with an external glass panel not held with frame. This design allows
you to clean the inside face of the exterior door panel as well as the hidden face of the door
inner glass.
To Remove the External Door Glass Panel:
1. Remove the door as described in Removing and Replacing the Oven Door section and
lay the door flat.
2. Using a screwdriver, remove the 5 screws fastening the glass & molding assembly.
3. Grasp both sides of the glass panel and slowly pull it out of the door upper molding. Lay
the glass flat.
To Replace the External Door Glass Panel:
1. Grasp the sides of the glass panel carefully insert the glass into the door top molding.
2. Replace the 5 locking screws.
3. Replace the door onto the range.
Handle the glass panel with care. When dropped on a corner, the glass panel
may shatter. This can cause several persona injury.
Care & Cleaning
Storage Drawer
Use the storage drawer for storing cooking utensils. The drawer can be removed to facilitate cleaning under the range. Use
care when handling the drawer.
Removing and Replacing Storage Drawer
To remove the drawer:
1. Pull empty drawer out to the roller guide stop.
2. Tilt the drawer up and pull it out over the rollers.
To replace the drawer:
1. Insert the rear end of the drawer into the opening.
2. Fit the drawer end rollers onto the guide rails.
3. Push the drawer in until it stops, then lift to allow the rollers to clear the roller
guide stop, and push in.
Changing Oven Light
Be sure the oven is unplugged and all parts are COOL before replacing the oven light bulb. Do not turn the oven
light on during a self-cleaning cycle. High temperature will reduce lamp life.
On some models an interior oven light will turn on automatically when the oven is opened.
The oven light may be turned on when the door is closed by using the oven light switch located on the Electronic Oven control.
The oven light bulb is covered with a glass shield held in place by a wire holder. THIS GLASS SHIELD MUST ALWAYS BE
To Replace the Light Bulb:
Turn the power off at the main source.
Wear a leather-faced glove for protection against possible broken glass.
Replace bulb with a 40 Watt appliance bulb only.
For self-cleaning oven, press wire holder to one side to release glass shield, change bulb and be
sure to replace glass shield.
Adjusting Your Oven Temperature
For instructions on how to adjust the oven temperature refer to the electronic oven control guide.
Before you call
Solutions to Common Problems
Range is not level.
Poor installation. Place oven rack in center of oven. Place a level on the oven rack.
Adjust leveling legs at base of range until the rack is level. When range is level,
cooktop may appear out of alignment if countertop is not level.
Weak, unstable floor. Be sure floor is level and can adequately support range. If floor
is sagging or slopping, contact a carpenter to correct the situation.
Kitchen cabinet misalignment may make range appear to be unlevel. Be sure
cabinets are square and have sufficient room for range clearance.
Cannot move appliance easily.
Appliance must be accessible for
Cabinets not square or are built in too tight. Contact a cabinet maker to correct the
Contact builder or installer to make appliance accessible.
Carpet interferes with range. Provide sufficient space so range can be lifted over
Gas line is hard-plumbed. Have a flexible C.S.A international approved metal
appliance connector installed.
Entire range or oven does not operate.
Make sure cord/plug is plugged tightly into outlet.
Service wiring is not complete. Call an authorized servicer.
Electrical power outage. Check house lights to be sure. Call your local electric
company for service. Surface burners can be lit manually.
*Oven control beeps and displays any F
code error (for example F11)
Electronic control has detected a fault condition. Press STOP/CLEAR to clear the
display and stop beeping. Reprogram oven. If fault recurs, record fault number. Press
STOP/CLEAR and call an authorized servicer for assistance.
Oven light does not work.
Replace or tighten bulb. See Changing Oven Light section in this Use & Care Guide.
Electrical power outage. Check house lights to be sure. Call your local electric
company for service.
Surface burners do not light.
Surface control knob has not been completely turned to LITE. Push in and turn the
surface control knob to LITE until burner ignites and then turn the surface control
knob to the desired flame size.
Burner ports are clogged. Clean burners. See “Cleaning the Burner Grates, Burner
Caps and Burner Heads” under General Cleaning.
Range power is disconnected from outlet. Be sure cord is securely plugged into the
Electrical power outage.
Be sure the gas supply to the range is turned “ON”.
Surface burner flame burns half way
Burner ports or slots are clogged. With the burner off, use a small-gauge wire or
needle to clean ports or slots.
Moisture is present after cleaning. Lightly fan the flame and allow the burner to
operate until flame is full. Dry the burners thoroughly following instructions under
General Cleaning.
Before you call
Solutions to Common Problems
Surface burner flame is orange.
Dust particles in main line. Allow the burner to operate a few minutes until flame
turns blue.
Salt air in coastal areas. A slightly orange flame is unavoidable.
Poor baking results.
Many factors affect baking results. Make sure the proper rack position is used.
Center food in the oven and space pans to allow air to circulate. Allow the oven to
preheat to the set temperature before placing food in the oven. Try adjusting the
recipes’ recommended temperature or baking time. If you feel the oven is too hot or
cool, see “Recalibrating Your Oven Temperature” section in the Electronic Oven
Control Guide.
Fan noise during cooking operation.
A cooling fan may automatically turn on and off to cool internal parts. It is normal,
and the fan may continue to run even after oven is turned off.
Flames inside oven or smoking from
Excessive spillovers in oven. Set self-clean cycle for a longer cleaning time.
Excessive spillovers in oven. This is normal, especially for pie spillovers or large
amounts of grease on the oven bottom. Wipe up excessive spillovers before starting
the self-clean cycle. If flames or excessive smoke are present, stop the self-clean
cycle and follow the steps under "Stopping or Interrupting the Self-Cleaning
Cycle" in the Electronic Oven Control Guide.
Oven smokes excessively during
Meat is too close to the element. Reposition the rack to provide proper clearance
between the meat and the oven boil element.
Meat is not properly prepared. Remove excess fat from meat. Remove remaining
fatty edges to prevent the meat from curling, but do not cut into the lean of the meat.
Broiler pan used without the Broiler Pan Insert or insert is covered with foil. DO NOT
use the Broiler Pan without the Broiler Pan Insert or cover the insert with foil.
Broiler Pan or Broiler Pan Insert needs to be cleaned. Excessive smoking is caused
by buildup of grease or food spatters. Clean the Broiler Pan and Insert on a regular
Oven door is open. Oven door should be closed when broiling.
Self-cleaning cycle does not work.
Control(s) not set properly. Follow instructions under “Oven Cleaning” in the
Electronic Oven Control Guide.
Self-cleaning cycle was interrupted. Stop time must be 2 to 4 hours past the start
time. Follow steps under "Stopping or Interrupting the Self-Cleaning Cycle" in the
Electronic Oven Control Guide.
Soil not completely removed after selfcleaning cycle.
Set Self-Clean cycle for a longer cleaning time.
Failure to clean bottom front, top of oven or door areas outside oven seal. These
areas are not in the Self-Cleaning area, but get hot enough to burn on food residue.
Clean these areas before starting the Self-Clean cycle. Burned-on residue may be
cleaned with a stiff nylon brush and water or nylon scrubber. Be careful not to
damage the oven gasket.
Excessive smoking from oven vent.
Excessive spillovers in oven, especially for pie spillovers or large amounts of grease
on the oven bottom. Wipe up excessive spillovers before starting the Self-Clean
cycle. If flames or excessive smoke are present, stop the Self-Clean cycle and follow
the steps under "Stopping or Interrupting the Self-Cleaning Cycle" in the
Electronic Oven Control Guide.
Your Range is protected by this warranty
One year from original
purchase date.
Pay all costs for repairing or replacing any parts of this Costs of service calls that are listed under NORMAL
appliance which prove to be defective in materials or RESPONSIBILITIES OF THE CONSUMER.*
(Glass Smoothtop,
Seal & Elements)
Second through fifth years
from original purchase date.
Provide a replacement for any defective surface heating Diagnostic and any transportation and labor costs which
element, deteriorated rubberized-silicone seal (upswept models are required because of service.
only), or glass smoothtop that crack due to thermal breakage
(not customer abuse).
(Applicable to the
State of Alaska)
Time periods listed above.
All of the provisions of the full and limited warranties above Costs of the technician's travel to the home and any costs
and the exclusions listed below apply.
for pick up and delivery of the appliance required because
of service.
In the U.S.A., your appliance is warranted by Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp. We authorize
no person to change or to add to any of our obligations under this warranty. Our obligations for service and parts under this warranty must be performed
by us or an authorized servicer.
This warranty applies only to products in ordinary household use, and the consumer is responsible for
the items listed below:
1. Proper use of the appliance in accordance with instructions provided with the product.
2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in
accordance with all local plumbing, electrical and/or gas codes.
3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose
connections or defects in house wiring.
4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which
are not a part of the appliance when it was shipped from the factory.
5. Damages to finish after installation.
6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).
This warranty does not cover the following:
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation
or exclusion may not apply to you.
2. Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in ordinary
household use. The consumer shall pay for such service calls.
3. Damages caused by services performed by servicers other than Electrolux Home Products, Inc., Electrolux Canada
Corp., or their authorized servicers; use of parts other than genuine Electrolux parts; obtained from persons other
than such servicers; or external causes such as abuse, misuse, inadequate power supply or acts of God.
4. Products with original serial numbers that have been removed or altered and cannot be readily determined.
Keep your bill of sale, delivery slip, or some other appropriate payment record. The date on the bill establishes the warranty
period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. This
written warranty gives you specific legal rights. You may also have other rights that vary from state to state. Service
under this warranty must be obtained by contacting Electrolux Home Products, Inc. or Electrolux Canada Corp.
This warranty only applies in the 50 states of the U.S.A., Puerto Rico, and Canada. Product features or specifications as described or illustrated are subject to change without
notice. All warranties are made by Electrolux Home Products, Inc. or Electrolux Canada Corp.
Electrolux Home Products, Inc.
P.O. Box 212378
Augusta, GA 30917
866•294•9911 (English or French)
Electrolux Canada Corp.
6150 McLaughlin Road
Mississauga, Ontario, Canada
L5R 4C2
Download PDF