Frigidaire 318204125 Range User Manual

ELECTRONIC OVEN CONTROL
Control Pad Functions
Read the instructions carefully before using the oven. For satisfactory use of your oven, become familiar with the
various functions of the oven as described below. Note: The graphics on your timer may not look exactly like those
shown. This doesn't change the way it operates. Also Push buttons or pads may be shaped differently.
Even-Cook
C onv ec t i on Ov en
Conv
bake
Pre
heat
Speed
clean
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
1
2
3
4
5
6
Conv
convert
Bake
Clean
Oven
light
Clock
Timer
On/Off
7
8
9
Conv
roast
Broil
Maxx
clean
Bake
time
Start
time
Keep
warm
Clear
/Off
0
START
Conv
bake
Pre
Heat
Speed
clean
Bake
time
Conv
convert
Bake
Clean
Start
time
Conv
roast
Broil
Maxx
clean
Keep
Warm
Even-Cook Convection Oven
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Oven
light
Conv Convert—
Use to select the
Convection
Convert feature.
Preheat—
Use to precondition the
oven
temperature.
Bake—Use to
select the normal
baking feature.
Broil— Use to
select variable Broil
feature.
2
3
4
5
6
7
8
9
Clear
/Off
0
START
CONV BAKE BROIL
ROAST WARM PROBE
Clock
Timer
On/Off
Controls
Controls
Conv Bake —
Used to select
the convection
bake feature.
1
Speed Clean —
Use to select a 2
hour SelfCleaning cycle.
Clean— Use to
select a 3 hour
Self-Cleaning
cycle.
Oven
Light— Use Clock— Use
to turn the
to set the
oven light ON time of day.
and OFF.
Even-Cook
C onv ec t i on Ov en
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Timer ON/
OFF— Use
to set or
cancel the
minute timer.
0 Thru 9
number pads—
Use to enter
temperature and
times.
1
2
3
4
5
6
Conv
bake
Pre
heat
Speed
clean
Conv
convert
Bake
Clean
Oven
light
Clock
Timer
On/Off
7
8
9
Broil
Maxx
Bake
time
Start
time
Keep
warm
Clear
/Off
0
START
Conv
roast
clean
Conv Roast—
Use to select
the Convection
Roast feature. Maxx Clean— Bake Time— Use
Use to select a to enter the length
of the baking time.
4 hour SelfCleaning cycle.
Controls
Start Time— Use with
Bake, Bake Time and
Clean Pads to program a
Delayed Timed Bake or
Delay Self-Cleaning cycle.
Keep Warm
— Use to
select the
Keep Warm
feature.
Start—
Use to
start all
oven
features
(not used
with
Oven
Light).
Clear/Off or Lock Controls - Use to
cancel any oven mode previously
entered except the Time of Day &
Minute Timer. Push Clear/Off to stop
cooking. Also used to control the Oven
Lockout feature.
Minimum & Maximum Control Pad Settings
All the features listed have minimum and maximum time or temperature settings that may be entered into the control. An
ENTRY acceptance beep will sound each time a control pad is touched (the Oven Lockout pad is delayed by 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature.
FEATURE
MIN. TEMP./TIME
MAX. TEMP./TIME
Versión en español
PREHEAT TEMP.
170°F/ 77°C
550°F/ 288°C
Si desea obtener una copia
BAKE TEMP.
170°F/ 77°C
550°F/ 288°C
en español de este Manual
BROIL TEMP.
400°F/ 205°C
550°F/ 288°C
del Usuario, sírvase escribir
MINUTE TIMER 12 Hr.
0:01 Min.
11:59 Hr./ Min.
a la dirección que se incluye
24 Hr.
0:01 Min.
11:59 Hr./ Min.
a continuación. Solicite la P/
CLOCK TIME 12 Hr.
1:00 Hr./ Min.
12:59 Hr./ Min.
N 318204125E.
24 Hr.
0:00 Hr./ Min.
23:59 Hr./ Min.
COOK TIME
12 Hr.
0:01 Min.
11:59 Hr./ Min.
Spanish Owner's Guides
24 Hr.
0:01 Min.
11:59 Hr./ Min.
Frigidaire Company
START TIME 12 Hr.
1:00 Hr./ Min.
12:59 Hr./ Min.
P. O. Box 9061
24 Hr.
0:00 Hr./ Min.
23:59 Hr./ Min.
Dublin, Ohio 43017-0961
CONVECTION BAKE
170°F/ 77°C
550°F/ 288°C
CONVECTION ROAST
170°F/ 77°C
550°F/ 288°C
Printed in United States
1
318204125 (0707) Rev. B
Setting the Clock
The
Clock
pad is used to set the clock. The clock may be set for 12 or 24 hour time of day
operation. The clock has been preset at the factory for the 12 hour operation. When the
range is first plugged in, or when the power supply to the range has been interrupted, the
time in the display will flash (See Figure 1).
INSTRUCTIONS
To set the clock (example below for 1:30)
1. Press
Clock .
2. Press 1
PRESS
"CLO" will appear in the display (Figure 2).
3
START
CONV BAKE BROIL
ROAST WARM PROBE
Figure 1
DISPLAY
Clock
0 pads to set the time of day to 1:30 (Figure 3).
"CLO" will stay in the display. Press
TIMED DELAY TIMER
DOOR LOCKED CLEAN
1
. "CLO" will disappear
3
0
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
START
and the clock will start (Figure 4).
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Changing between 12 or 24 hour time of day display
1. Press and hold
Clock
for 7 seconds (Figure 3). After 7 seconds,
Figure 3
Clock
for 7 seconds
"12h" (Figure 5) or "24h" (Figure 6) will appear in the display and
the control will beep once.
2. Press
Clean
CONV BAKE BROIL
ROAST WARM PROBE
TIMED DELAY TIMER
DOOR LOCKED CLEAN
to switch between the 12 and 24 hour time of day
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
Clean
display. The display will show either "12h" (Figure 5) or "24h"
(Figure 6).
3. Press
START
to accept the change or press
Clear
/Off
to reject the
change.
4. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen, the
clock will now display time from 0:00 through 23:59 hours.
2
START
or
Clear
/Off
Figure 5
Figure 6
Setting the Clock (continued)
Setting Continuous Bake or 12 Hour Energy Saving
The TIMER ON/OFF
Timer
On/O
Off
and CLEAN
Clean
pads control the Continuous Bake or 12 Hour Energy Saving features.
The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven
control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for
Continuous Baking.
INSTRUCTIONS
To set the control for Continuous Bake or 12 Hour
Energy Saving features
PRESS
1. Press and hold
Timer
Timer
On/O
Off
for 7 seconds (Figure1). After 7 seconds
"12h" or "- -h" will appear in the display and the control will
beep once.
2. Press
Clean
TIMED DELAY TIMER
DOOR LOCKED CLEAN
On/O
Off
for 7
to switch between the 12 Hour Energy Saving and
START
Clear
/Off
Figure 1
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Clean
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
TIMED DELAY TIMER
DOOR LOCKED CLEAN
to accept the change (Figure 4; display will return
to time of day) or press
CONV BAKE BROIL
ROAST WARM PROBE
seconds
continuous bake features. Note: "12h" (Figure 2) in the display
indicates the control is set for the 12 Hour Energy Saving
mode and "- -h" indicates the control is set for the Continuous
Bake feature (Figure 3).
3. Press
DISPLAY
START
Clear
/Off
to reject the change.
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
Setting Timer
The TIMER ON/OFF
Timer
On/O
Off
pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will
beep when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the
other oven control functions. Refer to “Minimum and Maximum Control Pad Settings” for time amount settings.
INSTRUCTIONS
PRESS
DISPLAY
To set the Timer (example for 5 minutes)
1. Press
Timer .
On/O
Off
Timer
"- - - -" will appear and "TIMER" will flash in the
TIMED DELAY TIMER
DOOR LOCKED CLEAN
On/O
Off
display (Figure 5).
2. Press the number pads to set the desired time in the display
(example 5 ). Press
START
. The time will begin to count
Figure 5
START
5
TIMED DELAY TIMER
DOOR LOCKED CLEAN
down with "5:00" and "TIMER" will stay in the display (Figure
6). Note: If
START
is not pressed the timer will return to the
Timer
On/O
Off
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Timer
is pressed.
Timer .
On/O
Off
On/O
Off
Timer
The display will return to the time of day.
On/O
Off
3
CONV BAKE BROIL
ROAST WARM PROBE
Figure 7
To cancel the Kitchen Timer before the set time has
run out
Press
CONV BAKE BROIL
ROAST WARM PROBE
Figure 6
time of day after 25 seconds.
3. When the set time has run out, "End" and "TIMER" will show in
the display (Figure 7). The clock will sound with 3 beeps every
5 seconds until
CONV BAKE BROIL
ROAST WARM PROBE
Consumer Defined Controls
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Silent Control Operation and Temperature Display features.
Setting Oven Lockout Feature
The
Clear
/Off
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
INSTRUCTIONS
PRESS
DISPLAY
To activate the Oven Lockout feature
1. Press and hold
Clear
/Off
Clear
/Off
for 3 seconds.
for 3 seconds
2. After 3 seconds a beep will sound, "LOC" will appear and
"DOOR LOCKED" will flash in the display (If you have a range
see figure 1-A; if it's a wall oven see figure 1-B). Once the oven
door is locked the "DOOR LOCKED" indicator will stop
flashing.
Clear
/Off
CONV BAKE BROIL
ROAST WARM PROBE
Figure 1-A
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 1-B
To reactivate normal oven operation:
1. Press and hold
TIMED DELAY TIMER
DOOR LOCKED CLEAN
for 3 seconds. A beep will sound. "LOC"
Clear
/Off
for 3 seconds
will disappear. The "DOOR LOCKED" will flash in the display
until the oven door has completely unlocked (Figure 2).
2. The oven is again fully operational.
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
Setting Silent Control Operation
The START TIME
Start
time
and CLEAN
Clean
pads control the Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can
be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation
PRESS
1. To tell if your range is set for normal or silent operation press
and hold
Start
time
for 7 seconds. "- - - -" will appear and "DELAY"
DISPLAY
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Start
time
for 7 seconds
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
will flash in the display (Figure 3). After 7 seconds "SP" will
appear in the display (Figure 4).
2. Press
Clean
to switch between normal sound operation and
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 4
silent operation mode. The display will show either "SP"
(Figure 4) or "--" (Figure 5).
If "SP" appears (Figure 4), the control will operate with normal
sounds and beeps. If "- -" appears (Figure 5), the control is in
the silent operation mode.
3. Press
START
to accept the change or press
Clear
/Off
to reject the
change.
Note: The control will always beep at the end of a kitchen timer
and will beep when a set temperature has been reached, even if
the control is set to silent operation.
4
CONV BAKE BROIL
ROAST WARM PROBE
Clean
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 5
START
or
Clear
/Off
Consumer Defined Controls (continued)
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL
Broil
and CLEAN
Clean
pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory
to display in Fahrenheit.
INSTRUCTIONS
PRESS
DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
(Figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press
Clean
Broil
Broil
for 7 seconds
START
TIMED DELAY TIMER
DOOR LOCKED CLEAN
to switch between Fahrenheit or Celsius display
to accept the change or press
Clear
/Off
to reject the
CONV
CONV BAKE
BAKE BROIL
BROIL
ROAST
ROAST WARM
WARM PROBE
PROBE
Figure 1
Clean
START
or
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press
TIMED
DELAY TIMER
TIMED DELAY
TIMER
DOOR
LOCKED CLEAN
CLEAN
DOOR LOCKED
Clear
/Off
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
change.
5
Setting Oven Controls
Setting Preheat
Pre
Heat
The PREHEAT
pad controls the Preheat feature. The Preheat feature will bring the oven up to temperature and
then indicate when to place the food in the oven. Use this feature when recipes call for preheating. Preheating is not
necessary when roasting or cooking casseroles. The oven can be programmed to preheat at any temperature between
170°F to 550°F.
INSTRUCTIONS
To set the Preheat temperature for 375°F
PRESS
DISPLAY
1. Arrange the interior oven racks.
2. Press
Pre
Heat
. "350°" and "BAKE" will appear in the display
(Figure 1). Note that if a preheat of 350°F is needed, press
3. Press 3
7
START
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Pre
Heat
Figure 1
.
5 . "375°" and "BAKE" will appear in the
3
7
5
display (Figure 2).
4. Press
START
TIMED DELAY TIMER
DOOR LOCKED CLEAN
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
Clear
/Off
feature.
TIMED DELAY TIMER
DOOR LOCKED CLEAN
To change Preheat temperature while oven is
preheating (example: changing from 375°F to 425°F)
CONV BAKE BROIL
ROAST WARM PROBE
Figure 5
If it is necessary to change the preheat temperature while the oven
is preheating to the original temperature:
Pre
Heat
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
when baking is complete or to cancel the preheat
1. While preheating, press
CONV BAKE BROIL
ROAST WARM PROBE
START
. "PRE" and "BAKE" will appear in the display as
Note: After the oven has reached the desired temperature (this
example, 375°F) the control will beep and the "PRE" light will turn
off and oven temperature will be displayed (Figure 4). If you
missed hearing the beep, you can tell that the oven has reached
preheat temperature if you see the oven temperature showing in
the oven display. Once the oven has preheated, PLACE FOOD IN
THE OVEN. The "BAKE" light will stay on.
Clear
/Off
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 2
the oven heats and reaches 375°F (Figure 3).
Press
CONV BAKE BROIL
ROAST WARM PROBE
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Pre
Heat
. "375" and "BAKE" will appear in
CONV BAKE BROIL
ROAST WARM PROBE
Figure 6
the display (Figure 5)
2. Enter the new preheat temperature. Press 4
2
5 .
4
2
TIMED DELAY TIMER
DOOR LOCKED CLEAN
"425°" and "BAKE" will appear in the display (Figure 6).
3. Press
START
. "PRE" and "BAKE" will appear in the display as
START
the oven heats to 425°F (Figure 7). A beep will sound once the
oven temperature reaches 425°F and the display will show
"425°" and "BAKE" (Figure 8).
4. When baking is complete press
Clear
/Off
.
Note: Electric models only, while in preheat mode, the
convection fan and convection element will be activated during the
first rise of temperature to allow the oven to reach its target
temperature faster. The bake and broil elements will also cycle for
better heat distribution.
6
5
Figure 7
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Clear
/Off
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
Figure 8
Setting Oven Controls (continued)
Setting Bake
The BAKE
Bake
pad controls normal baking. The oven can be programmed to bake at any temperature from 170° F to
550° F (The sample shown below is for 375°F).
INSTRUCTIONS
PRESS
DISPLAY
To set the Bake Temperature to 375°F
1. Arrange interior oven racks and place food in oven.
2. Press
Bake
, "350°" will appear and "BAKE" will flash in the
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Bake
CONV BAKE BROIL
ROAST WARM PROBE
Figure 1
display (Figure 1). If a bake of 350°F is needed, press
3. Press 3
7
START
.
5 (Figure 2). "BAKE" will continue to flash and
3
7
5
"375°" will appear in the display.
4. Press
START
Clear
/Off
. The display will show "375°" and "BAKE" (Figure 3).
START
TIMED DELAY TIMER
DOOR LOCKED CLEAN
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Bake
Bake
(Figure 4). "375°" will appear and "BAKE" will flash in the
display.
2
5 (Figure 5). "BAKE" will continue to flash and
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
1. After the oven has already been set to bake at 375°F and the
oven temperature needs to be changed to 425°F, press
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
Clear
/Off
will cancel the Bake feature at any time.
To change the Bake Temperature (example: changing
from 375°F to 425°F)
2. Press 4
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
A beep will sound once the oven temperature reaches 375° F.
Pressing
TIMED DELAY TIMER
DOOR LOCKED CLEAN
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 5
4
2
5
"425°" will appear in the display.
3. Press
START
. "BAKE" and "425°" will stay in the display (Figure 6).
START
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 6
Note: If the oven was recently heated from prior cooking and has
remained heated, the bake element symbol may not show in the
display immediately.
Note: Electric models only, during the first rise of temperature, the
convection fan and convection element will be activated to allow the
oven to reach its target temperature faster. The Bake and Broil
elements will also cycle for a better heat distribution.
7
Setting Oven Controls (continued)
Setting Convection Bake
The CONV BAKE
Conv
bake
Air
circulation
during
Convection
Bake
pad controls the Convection Bake feature. The oven
can be programmed for Convection baking at any temperature between 170°
F (77°C) to 550° F (288° C).
Convection baking uses a fan to circulate the oven's heat evenly and
continuously within the oven (Figure 1). This improved heat distribution
allows for even cooking and excellent results using multiple racks at the
same time. Foods cooked on a single oven rack will generally cook faster
and more evenly with Convection Bake. Multiple oven rack cooking may
slightly increase cook times for some foods, but the overall result is time
saved. Breads and pastries brown more evenly.
Figure 1
3rd Rack
position
2nd Rack
position
General Convection Bake Instructions
1. When using Convection Bake, adjust the cook time for desired doneness
as needed. Time reductions will vary depending on the amount and type
of food to be cooked. Cookies and biscuits should be baked on pans
with no sides or very low sides to allow heated air to circulate around the
food. Food baked on pans with a dark finish will cook faster.
2. Preheating is not necessary when cooking casseroles with Convection
Bake.
3. When using Convection Bake with a single rack, place oven rack in
position 2 or 3. If cooking on multiple racks, place the oven racks in
positions 2 and 4.
INSTRUCTIONS
4th Rack
position
1st Rack
position
Figure 2
Benefits of Convection Bake:
—Multiple rack baking.
—Some foods cook up to 30%
faster, saving time and energy.
—No special pans or bakeware
needed.
PRESS
DISPLAY
To set the oven for Convection Bake and
temperature to 375°F
1. Arrange interior oven racks and place food in oven.
2. Press
Conv
bake
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Conv
bake
. "CONV BAKE" will flash and "350°" will appear in
Figure 3
the display (Figure 3). If a Convection bake of 350°F is
needed, press
3. Press 3
7
START
.
5 . "CONV BAKE" will keep flashing and
3
7
"375°" will appear in the display (Figure 4).
4. Press
START
. "CONV BAKE" will stop flashing and the fan icon
TIMED DELAY TIMER
DOOR LOCKED CLEAN
to stop Convection Bake or cancel Convection Bake at
any time.
8
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 5
Note: The display will show an icon of rotating fan within a square.
This rotating fan icon indicates when the Convection Fan is
operating. Electric Models: The convection fan and convection
element will start AS SOON AS the oven is set for Convection
Bake. Gas Models: Please allow up to 6 minutes for the
convection fan and convection element to activate.
Clear
/Off
5
START
will appear in the display (Figure 5).
Press
CONV BAKE BROIL
ROAST WARM PROBE
Clear
/Off
Setting Oven Controls (continued)
Setting Convection Roast
The CONV ROAST
Conv
roast
pad is designed to give optimum cooking performance for this feature. The Convection Roast
pad combines a cook cycle with the convection fan and element to roast meats and poultry. Preheating is not
necessary for meats and poultry. Heated air circulates around the food from all sides, sealing in juices and flavors.
Foods are crispy brown on the outside while staying moist on the inside.
INSTRUCTIONS
PRESS
DISPLAY
To set the Convection Roast feature (example: Meats to
cook at 375°F)
1. Arrange interior oven racks and place food in oven.
2. Press
Conv
roast
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Conv
roast
. "CONV ROAST" will flash and "350°" will be displayed
Figure 1
(Figure 1).
3. Press 3
7
5 . "CONV ROAST" will flash and "375°" will
3
7
5
appear in the display (Figure 2).
4. Press
START
TIMED DELAY TIMER
DOOR LOCKED CLEAN
. "CONV ROAST" and "375°" will appear in the display
CONV BAKE BROIL
ROAST WARM PROBE
START
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
(Figure 3). The convection fan icon will come on.
Press
Clear
/Off
Clear
/Off
to stop Convection Roast at any time.
Note: The display will show an icon of rotating fan within a square. This rotating fan icon
indicates when the Convection Fan is operating. Electric Models: The convection fan and
convection element will start AS SOON AS the oven is set for Convection Bake. Gas
Models: Please allow up to 6 minutes for the convection fan and convection element to
activate.
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 3
Roasting Rack Instructions (some models)
When preparing meats for convection roasting, use the broiler pan and insert along
with the roasting rack (if equipped). The broiler pan will catch grease spills and the
insert will help prevent grease splatters. The roasting rack will allow the heat to
circulate around the meat.
To prevent food from contacting the broil element and to prevent
grease splattering, DO NOT use the roasting rack when broiling.
1. Place oven rack on bottom or next to the bottom rack position. See Arranging
Oven Racks in the Before Setting Oven Controls section.
2. Place the insert in the broiler pan. The roasting rack fits on the insert allowing the
heated air to circulate under the food for even cooking and helps to increase
browning on the underside. Make sure the roasting rack is securely seated on
the insert in the broiler pan. DO NOT use the broiler pan without the insert. DO
NOT cover the insert with aluminum foil.
3. Position food (fat side up) on the roasting rack (See Figure 4).
4. Place the broiler pan on the oven rack.
9
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
Setting Oven Controls (continued)
Setting Convection Convert feature
The
Conv
convert
CONV CONVERT pad is used to automatically convert a standard baking recipe for convection baking. When
set properly, this feature is designed to display the actual converted (reduced) temperature in display.
Convection Convert may ONLY be used with a Conv Bake, Timed Bake or a Delay Start (Delayed Timed Bake) setting.
When used with a Timed Bake or a Delayed Timed Bake setting, the Convection Convert feature will display a "CF" for
check food when the bake time is 75% complete (See Figure 3). At this time the oven control will sound 3 long beeps at
regular intervals until baking has finished. When the bake time has completely finished the control will display "End" and
will sound 3 long beeps every 30 seconds until the
Clear
/Off
pad is pressed.
INSTRUCTIONS
PRESS
To change from a normal bake recipe to a convection
bake recipe (example: changing a 400°F (204°C) normal
bake recipe to a convection bake recipe:
TIMED DELAY TIMER
DOOR LOCKED CLEAN
When the CONV BAKE mode is on at 400°F (204°C) (Figure 1), press
Conv
convert .
"CONV BAKE" and the oven temperature adjustment will appear
in the display (for this example it is 375°F). A beep will sound once the
adjusted oven temperature is reached. The display will show "375°",
"CONV BAKE" and the fan icon (Figure 2).
DISPLAY
CONV BAKE BROIL
ROAST WARM PROBE
Figure 1
Conv
convert
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
Note: When using a Cook Time, the convection convert will not operate if
you have a timed bake under is 20 minutes.
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
10
Setting Oven Controls (continued)
Setting Timed Bake, Timed Convection Bake or Timed Convection Roast
The BAKE
or CONVECTION BAKE
Bake
Conv
bake
or CONVECTION ROAST
Conv
roast
and BAKE TIME
Bake
time
pads control the
Timed Bake feature. The automatic timer of the Timed Bake feature will turn the oven OFF after cooking for the desired
amount of time you selected.
INSTRUCTIONS
PRESS
To program the oven to begin baking immediately and to shut off
automatically (example: BAKE at 350°F for 30 minutes)
1. Be sure the clock is set for the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
3. Press
Bake
, "350°" will appear and "BAKE" will flash in the
DISPLAY
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 1
Bake
display (Figure 1).
TIMED DELAY TIMER
DOOR LOCKED CLEAN
4. Press
START
. "BAKE" and "350°" will appear in the display (Figure 2).
START
5. Press
Bake
time
. "TIMED" will flash; "BAKE", "- - - -" and "350°" will
Bake
time
appear in the display (Figure 3).
0 (Figure 4).
3
0
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
TIMED DELAY TIMER
DOOR LOCKED CLEAN
6. Enter the desired baking time by pressing 3
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
Note: Baking time can be set for any amount of time between 1
minute to 11 hours and 59 minutes.
7. Press
START
. Both the "TIMED" and "BAKE" icons will remain on
START
Bake
time
to
TIMED DELAY TIMER
DOOR LOCKED CLEAN
display the bake time remaining in the Timed Bake mode. Once
Timed Bake has started baking, a beep will sound when the oven
temperature reaches the set temperature.
Press
Clear
/Off
when baking has finished or at any time to cancel the
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
in the display (Figure 5). Once the Timed Bake feature has
started, the current time of day will appear in the display.
Note: After the Timed Bake feature has activated, press
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 5
Clear
/Off
Timed Bake feature.
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 6
When the timed bake finishes:
1. "End" and the time of day will show in display. The oven will shut
off automatically (Figure 6).
2. The control will beep 3 times. The control will continue to beep 3
times every 30 seconds until
Clear
/Off
Clear
/Off
is pressed.
Use caution with the DELAYED TIME BAKE features. Use the automatic timer when cooking cured or
frozen meats and most fruits and vegetables. Foods that can easily spoil such as milk, eggs, fish, meat or poultry,
should be chilled in the refrigerator first. Even when chilled, they should not stand in the oven for more than 1 hour
before cooking begins, and should be removed promptly when cooking is completed. Eating spoiled food can result in
sickness from food poisoning.
11
Setting Oven Controls (continued)
Setting Delayed Timed Bake, Delayed Timed Convection Bake or Convection Roast
The BAKE
Start
time
or CONVECTION BAKE
Bake
Conv
bake
,or CONVECTION ROAST
Conv
roast
, BAKE TIME
Bake
time
and START TIME
pads control the Delayed Time Bake feature. The automatic timer of the Delayed Time Bake will turn the oven on
and off at the time you select in advance. Note: If your clock is set for normal 12 hour display mode the Delayed Timed
Bake or Delayed Timed Convection Bake cycle can never be set to start more than 12 hours in advance. To set for
Delayed Timed Bake or Delayed Timed Convection Bake 12-24 hours in advance set the control for the 24 hour time of
day display mode.
INSTRUCTIONS
PRESS
DISPLAY
To program the oven for a delayed BAKE start time and to shut off automatically
(example: baking at 350°F, starting at 5:30 and baking for 30 minutes)
1. Be sure that the clock is set with the correct time of day.
2. Arrange interior oven rack(s) and place the food in the oven.
3. Press
Bake
. "350°" will appear and "BAKE" will flash in the display
Bake
(Figure 1).
4. Press
START
5. Press
Bake
time
TIMED DELAY TIMER
DOOR LOCKED CLEAN
. "BAKE" and "350°" will stay in the display (Figure 2).
Figure 1
START
Bake
time
. "TIMED" will flash, "- - - -" will appear and "BAKE" and
TIMED DELAY TIMER
DOOR LOCKED CLEAN
"350°" will remain in the display (Figure 3).
6. Enter the desired baking time using the number pads by pressing
3
0
in the display (Figure 4). Note: Baking time can be set for any
amount of time from 1 minute to 11 hours and 59 minutes.
7. Press
START
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Start
time
. "TIMED", "BAKE" and "350°" will remain in the display
START
TIMED DELAY TIMER
DOOR LOCKED CLEAN
3
0 (Figure 6).
5
3
0
TIMED DELAY TIMER
DOOR LOCKED CLEAN
9. Press
START
. When Delayed Time Bake starts, "DELAY", "BAKE"
Note: Once Delayed Time Bake has started, press
Bake
time
to display the bake
TIMED DELAY
Press
when baking has completed or at any time to cancel the
Delayed Time Bake feature.
When the set bake time runs out:
1. "End" will appear in the display and the oven will shut off
automatically (Figure 9).
2. The control will beep 3 times. The control will continue to beep 3
times every 30 seconds until
Clear
/Off
BAKE
Figure 6
Bake
time
time remaining . Once the Delayed Timed Bake has started baking, a beep
will sound when the oven temperature reaches the set temperature.
Clear
/Off
TIMED DELAY
BAKE
Figure 7
Clear
/Off
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 8
TIMED DELAY TIMER
DOOR LOCKED CLEAN
is pressed.
CONV BAKE BROIL
ROAST WARM PROBE
Figure 5
START
and the current time of day will appear in the display (Figure 7).
10. When the desired start time is reached, the fan icon appears in
display and "DELAY" disappears. Oven starts to bake at the
previously selected temperature (Figure 8).
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
Start
time
. "DELAY" will flash in the display. Enter the desired start
time using the number pads 5
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
(Figure 5).
8. Press
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
0 . "TIMED" will flash; "BAKE", "- - 30" and "350°" will appear
3
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
Figure 9
12
Setting Oven Controls
(continued)
Setting Broil
The
Broil
pad controls the Broil feature. When broiling, heat radiates downward from the oven broiler for even
coverage. The Broil feature is preset to start broiling at 550°F; however, the Broil feature temperature may be set
between 400°F and 550°F. The broil pan and broil pan insert used together allow dripping grease to drain and be kept
away from the high heat of the oven broiler. DO NOT use the broil pan without the insert (See Figure 5). DO NOT
cover the broil pan insert with foil. The exposed grease could catch fire.
Should an oven fire occur, leave the oven door closed and turn off the oven. If the fire continues, throw
baking soda on the fire or use a fire extinguisher. DO NOT put water or flour on the fire. Flour may be explosive and
water can cause a grease fire to spread and cause personal injury.
INSTRUCTIONS
PRESS
DISPLAY
To set the oven to broil at the default setting (550°F):
1. Place the broiler pan insert on the broiler pan. Then place the food on
the broiler pan insert. DO NOT use the broiler pan without the insert.
DO NOT cover the broiler insert with foil. The exposed grease could
ignite.
2. Arrange the interior oven rack and place the broiler pan on the rack.
Be sure to center the broiler pan directly under the broiler element.
Electric Oven Only: Make sure the oven door is in the broil stop
position (see Figure 4). Gas Oven Only: Close the oven door. For
optimum browning, preheat broil burner for 3-4 minutes before
adding food.
3. Press
Broil
. "BROIL" will flash and "550°" will appear (Figure 1).
TIMED
DELAY TIMER
TIMED DELAY
TIMER
DOOR
LOCKED CLEAN
CLEAN
DOOR LOCKED
Figure 1
TIMED DELAY TIMER
DOOR LOCKED CLEAN
START
. The oven will begin to broil. "BROIL" and "550°" will
Broil
TIMED DELAY TIMER
DOOR LOCKED CLEAN
7. To cancel broiling or if finished broiling press
(Figure 3).
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
START
appear in the display (Figure 2).
6. Broil on one side until food is browned; turn and cook on the second
side. Season and serve. Note: Always pull the rack out to the stop
position before turning or removing food.
Clear
/Off
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
4. If a lower broil temperature is desired (minimum broil temperature
setting is 400°F), press the desired temperature before continuing to
step 5.
5. Press
CONV
CONV BAKE
BAKE BROIL
BROIL
ROAST
ROAST WARM
WARM PROBE
PROBE
Electric Oven Only
Broil Stop Position
Figure 4
Clear
/Off
Broiling Times
Use the following table for approximate broiling times. Increase or decrease broiling
times, or move the broiling pan to a different rack position to suit for doneness. If the
food you are broiling is not listed in the table, follow the instructions provided in your
cookbook and watch the item closely.
Electric and Gas Oven Broiling Table Recommendations
Food
Item
Steak 1" thick
Rack Position
from bottom
3rd or 4th
3rd or 4th
Pork Chops 3/4" thick 3rd
Chicken - Bone In
2nd
Chicken - Boneless
3rd
Fish
3rd
Shrimp
2nd
Hamburger 1" thick
4th
3rd
Temp
Setting
550° F
550° F
550° F
450° F
450° F
500° F
550° F
550° F
550° F
Cook Time
for ELECTRIC Oven Models
1st side
2nd side
6:00
7:00
8:00
20:00
8:00
13:00
5:00
9:00
10:00
4:00
5:00
6:00
10:00
6:00
n/a
n/a
7:00
8:00
13
Cook Time
For GAS Oven Models
1st side
2nd side
8:00
10:00
12:00
25:00
10:00
as directed
as directed
12:00
14:00
6:00
8:00
8:00
15:00
8:00
as directed
as directed
10:00
12:00
Figure 5
Doneness
Rare
Medium
Well
Well
Well
Well
Well
Medium
Well
Setting Oven Controls
(continued)
To Set the Sabbath Feature (for use on the Jewish Sabbath & Holidays)
The BAKE TIME
Bake
time
only be used with the
and START TIME
Bake
Start
time
pads are used to set the Sabbath feature. The Sabbath feature may
pad. The oven temperature may be set higher or lower after setting the Sabbath feature
(the oven temperature adjustment feature should be used only during Jewish Holidays), however the display will not
visibly show or provide any audible tones indicating whether the change occurred correctly. Once the oven is properly
set using Bake with the Sabbath feature active, the oven will remain continuously ON until cancelled. This will override
the factory preset 12-Hour Energy Saving feature.
If the oven light will be needed during the Sabbath, press
Oven
light
before activating the Sabbath feature. Once the oven
light is turned ON and the Sabbath feature is active, the oven light will remain ON until the Sabbath feature is turned
OFF. If the oven light needs to be OFF, be sure to turn the oven light OFF before activating the Sabbath feature.
IMPORTANT NOTES: It is not advised to attempt to activate any other program feature other than BAKE while the
Sabbath feature is active. ONLY the following key pads will function after setting the Sabbath feature; 0 to 9 ,
Bake
,
START
&
Clear
/Off
. ALL OTHER KEYPADS will not function once the Sabbath feature is properly activated.
INSTRUCTIONS
To Program the Oven to Begin Baking Immediately &
activate the Sabbath feature (example: baking at
350°F)
PRESS
DISPLAY
1. Be sure that the clock is set with the correct time of day.
2. Arrange the oven racks and place the food in the oven.
TIMED DELAY TIMER
DOOR LOCKED CLEAN
3. Press
Bake
, "350°" appears in the display.
4. Press
START
Figure 1
(Figure 1).
START
5. If a Timed Bake or Delayed Timed Bake is needed then enter
the time in this step. If not, skip this step and continue to step 7.
Refer to the Timed Bake / Delayed Timed Bake section for
complete instructions. Remember the oven will shut down after
completing a Timed Bake or Delayed Timed Bake and therefore
may only be used once during the Sabbath/Jewish Holidays. The
maximum delay time is 11 hours & 59 minutes.
6. The oven will turn ON and begin heating.
7. At the same time press and hold both the
CONV BAKE BROIL
ROAST WARM PROBE
Bake
Bake
time
and
Start
time
pads for
at least 3 seconds. SAb will appear in the display (Figure 2). Once
SAb appears in the display the oven control will no longer beep or
display any further changes and the oven is properly set for the
Sabbath feature.
14
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
Bake
time
and
Start
time
Setting Oven Controls (continued)
To Set the Sabbath Feature (for use on the Jewish Sabbath & Holidays)
INSTRUCTIONS
PRESS
DISPLAY
Note: You may change the oven temperature once baking has
started by pressing
Bake
, the numeric key pads for the
temperature you want (example for 425°F press 4 , 2 , 5 )
and then pressing
START
TWICE (for Jewish Holidays only).
Remember that the oven control will no longer beep when a
keypad is pressed or display any further changes once the
oven is set for the Sabbath feature.
8. The oven may be turned OFF at any time by first pressing
Clear
/Off
Clear
/Off
TIMED DELAY TIMER
DOOR LOCKED CLEAN
pad (this will turn the oven OFF only). To turn OFF the Sabbath
feature press and hold both the
Bake
time
and
Start
time
pads for at least 3
CONV BAKE BROIL
ROAST WARM PROBE
Figure 1
Bake
time
and
Start
time
seconds. This also turns off the oven. SAb will disappear from the
display (figure 1).
It is recommended that at any oven temperature change with the Sabbath feature activated be followed with 2 presses
of the START pad. This will insure the oven remains ON even if the attempt to set the oven temperature was lower or
higher than the oven control can accept. If the oven temperature is set incorrectly, the oven temperature will default to
170°F or 550°F. Try to set the desired oven temperature again.
Should you experience a power failure or interruption, the oven will shut off. When power is returned the oven will not
turn back on automatically. The oven will remember that it is set for the Sabbath and the food may be safely removed
from the oven while still in the Sabbath feature, however the oven cannot be turned back on until after the Sabbath.
After the
Sabbath observance turn OFF the Sabbath feature. Press and hold both the
Bake
time
and
Start
time
pads for at least 3
seconds. SAb will disappear from the display and the oven may be used with all normal functions. For further
assistance, guidelines for proper usage, and a complete list of models with the Sabbath feature, please visit the web at
http:\\www.star-k.org.
15
Setting Oven Controls (continued)
Setting the Keep Warm Feature
The Keep Warm
Keep
Warm
pad turns ON the Keep Warm feature and will maintain an oven temperature of 170°F (77°C).
The Keep Warm feature will keep oven baked foods warm for serving up to 3 hours after cooking has finished. After 3
hours the Keep Warm feature will shut the oven OFF. The Keep Warm feature may be used without any other cooking
operations or can be used after cooking has finished using BAKE, CONVECTION BAKE or CONVECTION ROAST.
The Keep Warm feature may be used with TIMED BAKE if you wish to have the Keep Warm feature turn ON
automatically when cooking has finished. The Timed Bake features require you to set start time and the amount of
cooking time. With this information the control can calculate the time when cooking will complete and can then start the
Keep Warm feature automatically.
INSTRUCTIONS
PRESS
DISPLAY
To set Keep Warm
1. Arrange interior oven racks and place food in oven.
2. Press
Keep
Warm .
"HLd" and "WARM" will appear in the display (Figure
Keep
Warm
1). Note: If no pad is touched within 25 seconds the request to turn
ON Keep Warm feature will be cancelled.
3. Press
START
. The oven icon will appear in the display (Figure 2).
4. To turn the Keep Warm OFF at any time press
Clear
/Off
START
Clear
/Off
.
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 1
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
Note: The Keep Warm feature will automatically turn OFF after 3
hours.
To set Keep Warm to turn ON automatically
1. Arrange interior oven racks and place food in oven. Set the oven
properly for Timed Bake or Delayed Timed Bake.
2. Press
Keep
Warm .
Keep
Warm
(Figure 3)
Note: If no pad is touched within 25 seconds the request to turn
ON the Keep Warm feature and all functions previously
programmed will be cleared.
3. Press
START
. "HLd" will disappear and the temperature will be
Clear
/Off
.
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
START
displayed (Figure 4). The Keep Warm mode is set to turn ON
automatically after Timed Bake has finished (See Figure 2).
4. To turn the Keep Warm feature OFF at any time press
TIMED DELAY TIMER
DOOR LOCKED CLEAN
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
Clear
/Off
Note: The Keep Warm feature will automatically turn OFF after 3
hours.
Pressing
Clear
/Off
at any time will stop all oven baking operations.
Clear
/Off
To turn ON/OFF the Oven Light
The oven light automatically turns ON when the oven door is opened. The oven light may also be manually turned ON
or OFF by pressing the
Oven
light
pad.
16
Oven Cleaning
Self-Clean Cycle Time Length
The SPEED CLEAN
Speed
clean
, CLEAN
Clean
and MAXX CLEAN
Maxx
clean
pads control the Self-Cleaning feature. If you are
planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven
door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to
complete. *It is recommend to use a
Maxx
clean
Speed
clean
cycle (2 hour) for light soils, a
Clean
cycle (3 hour) for average soils, and a
cycle (4 hour) for heavy soils (to assure satisfactory results).
During the Self-Cleaning cycle, the outside of the range can become very hot to touch. DO NOT leave small
children unattended near the appliance.
To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the
side of the oven when opening the door to allow hot air or steam to escape.
DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and
avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.
INSTRUCTIONS
PRESS
DISPLAY
To start an immediate Self-Cleaning cycle or to set a delay start time of 4:30 o'clock and shut
of automatically (example provided is a default 3 hour Self-Clean cycle):
1. Be sure the clock is set with the correct time of day, the oven is empty
and the oven door is closed.
2. Press
Clean .
TIMED DELAY TIMER
DOOR LOCKED CLEAN
"CLEAN" will flash and "3:00" HR will show in the display
CONV BAKE BROIL
ROAST WARM PROBE
Figure 1
Clean
(Figure 1). The control will automatically clean for a 3 hour period (default
self-cleaning cycle time). Note: If a 2 or 4 hour clean time is desired,
press
Speed
clean
for 2 hour or press
Maxx
clean
for a 4 hour clean time. Set the
Speed
clean
or
Maxx
clean
cleaning time based on the amount of soil: light, medium or heavy (* See
above).
3. Press
START
.The "DOOR LOCKED" icon will flash; "CLEAN" icon
TIMED DELAY TIMER
DOOR LOCKED CLEAN
Figure 2
TIMED DELAY TIMER
DOOR LOCKED CLEAN
START
CONV BAKE BROIL
ROAST WARM PROBE
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
and the letters "CLn" will remain on in the display
(Figure 2).
4. As soon as the control is set, the motor driven oven door lock will
begin to close automatically. Once the door has been locked the
"DOOR LOCKED" indicator light will stop flashing and remain on.
Also, the oven icon will appear in the display (Figure 3).
Note: Allow about 15 seconds for the oven door lock to close.
NOTE: If the optional delay Self-Clean feature is needed, finish steps 5-7. If Self-Clean is started immediately
skip the remaining steps and continue with "When the Self-Clean
cycle is done" on the following page.
TIMED DELAY TIMER
DOOR LOCKED CLEAN
5. Press
3
6. Press
Start
time
. Enter the desired start time using the number pads 4
0 (Figure 4).
START
Start
time
4
. "CLn", "DELAY", "DOOR LOCKED" and "CLEAN" icons
will remain on (Figure 5).
7. The control will start the self-cleaning at the set start time, for the period
of time previously selected. At that time, the icon "DELAY" will go out;
"CLn" and oven icon will appear in the display (Figure 6).
17
3
START
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
0
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 5
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 6
Oven Cleaning (continued)
INSTRUCTIONS
When the Self-Clean Cycle is Completed
PRESS
1. "Hot" will appear in the display with the time of day to indicate the
oven must cooled down before it can be used normally (Figure 1; or
Figure 2 if the clean cycle is used with the delay feature).
2. Once the oven has cooled down enough "Hot" message will
disappear, the oven door will unlock and "DOOR LOCKED" will
disappear from the display. The oven door can then be opened
(Figure 3).
DISPLAY
TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 1
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due to
excessive smoke or fire in the oven:
1. Press
Clear
/Off
Clear
/Off
.
2. The oven door can only be opened after the oven has cooled down
for approximately 1 HOUR and "Hot" and "DOOR LOCKED" is no
longer displayed (Figure 3).
IMPORTANT NOTES when using the Self-Clean feature:
1. On some models, the Self-Clean feature will not operate whenever a radiant surface
remains ON.
2. On some models, starting a self-clean cycle will turn ON the Cooktop Lockout feature.
If it is the case the symbol will appear in the display (Figure 4) which will indicate
that the Cooktop Lockout feature is ON. The cooktop will remain locked until the SelfClean cycle has completed and the oven door has unlocked.
3. A Self-Clean cycle cannot be started if Oven Lockout feature is active.
4. If a Self-Cleaning Cycle has started but not finished and a power failure occurs, the
appliance may not have thoroughly cleaned. Once power is restored, the oven door
and the cooktop are unlocked. Then set for another Self-Clean cycle to finish.
5. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can
never be set to start more than 12 hours in advance. To set for a delayed SelfCleaning cycle 12-24 hours in advance set the control for the 24 hour time of day
display mode.
18
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
Adjusting Oven Temperature
The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is cooking too hot or
too cool for the temperature you select, you can adjust the actual oven temperature to be
more or less than what is displayed. Before adjusting, test a recipe by using a temperature
setting that is higher or lower than the recommended temperature. The baking results
should help you to decide how much of an adjustment is needed.
INSTRUCTIONS
PRESS
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature or the
Broil temperature .
DISPLAY
To adjust the oven temperature higher
1. Press
Bake
for 6 seconds. 0° will appear in the display (Figure 1).
Bake
TIMED DELAY TIMER
DOOR LOCKED CLEAN
2. To increase the temperature use the number pads to enter the
desired change. (Example 30°F)
3
0 (Figure 2). The
3
0
CONV BAKE BROIL
ROAST WARM PROBE
Figure 1
temperature may be increased by as much as 35°F (19°C).
3. Press
START
to accept the temperature change and the display
will return to the time of day (Figure 3). Press
Clear
/Off
to reject the
or
START
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 2
Clear
/Off
change if necessary.
TIMED DELAY TIMER
DOOR LOCKED CLEAN
To adjust the oven temperature lower
1. Press
Bake
for 6 seconds. 0° will appear in the display (Figure 4).
CONV BAKE BROIL
ROAST WARM PROBE
Figure 3
Bake
2. To decrease the temperature use the number pads to enter the
desired change. (Example -30°F) 3
Clean
0
and then press
(Figure 5). The temperature may be decreased by as
3
0
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 4
Clean
much as 35°F (19°C).
3. Press
START
to accept the temperature change and the display
will return to the time of day (Figure 6). Press
Clear
/Off
to reject the
START
Clear
/Off
or
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 5
change if necessary.
TIMED DELAY TIMER
DOOR LOCKED CLEAN
CONV BAKE BROIL
ROAST WARM PROBE
Figure 6
To Set the Oven Control Back To The Factory Default Settings
This function allows you to reset the user defined settings back to the original settings. These include 12 or 24 Hour
Time of Day Display, Continuous Control Operation or 12 Hour Energy Saving mode, Silent Control Operation or
Normal Sounds, Fahrenheit or Celsius Temperature Display, Oven Temperature Adjustment (set back to 0).
1. Press and hold 7 until the first single beep sounds (about 6 seconds)
2. After the first beep, press
START
pad once. All the setting are now set to the original factory default.
19
Notes
20
Download PDF

advertising