Operating instructions | Frigidaire 318205205 Range User Manual

All about the
Use & Care
of your
Range
TA B L E O F C O N T E N T S
Setting Oven Controls...........................................15
Important Safety Instructions..................................3
Self Cleaning........................................................29
Features at a Glance...............................................6
Care & Cleaning (Cleaning Chart)..........................31
Before Setting Surface Controls...............................7
Care & Cleaning...................................................32
Setting Surface Controls.........................................9
Before You Call ...................................................36
Before Setting Oven Controls................................12
Major Appliance Warranty.....................................40
www.frigidaire.com USA 1-800-944-9044
www.frigidaire.ca Canada 1-800-265-8352
318205205 (May 2009) Rev. A
Welcome & Congratulations....................................2
Welcome & Congratulations
Product Registration
Register Your Product
The PRODUCT
REGISTRATION CARD
should be filled in completely,
signed and returned to
Electrolux Home Products.
Serial Plate Location
Congratulations on your purchase of a new appliance! At
Electrolux Home Products, we are very proud of our
product and are completely committed to providing you
with the best service possible. Your satisfaction is our
number one priority.
We know you’ll enjoy your new appliance and Thank You
for choosing our product. We hope you consider us for
future purchases.
Please CAREFULLY read and save these
instructions
This Use & Care Manual contains general operating
instructions for your appliance and feature information
for several models. Your product may not have all
the described features. The graphics shown are
representative. The graphics on your appliance may not
look exactly like those shown. These instructions are not
meant to cover every possible condition and situation
that may occur. Common sense and caution must be
practiced when installing, operating and maintaining any
appliance.
 NOTE
Please attach sales receipt here for future reference.
Please record your model and serial numbers
below for future reference.
Model Number:
Serial Number:
Purchase Date:
© 2009 Electrolux Canada Corp.
All rights reserved
Printed in United States
2
Important Safety Instructions
Read all instructions before using this appliance.
Save these instructions for future reference.
Definitions
This is the safety alert symbol. It is used to alert
you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury
or death.
WARNING
This symbol will help alert you to situations
that may cause serious bodily harm, death or
property damage.
CAUTION
This symbol will help alert you to situations that
may cause bodily injury or property damage.
IMPORTANT
IMPORTANT indicates installation, operation or
maintenance information which is important but not
hazard-related.
WARNING
• All appliance can tip.
• Injury to persons could result.
• Install anti-tip bracket packed with
your appliance.
• See Installation Instructions.
To reduce the risk of tipping, the
appliance must be secured by properly
installed anti-tip bracket provided
with the unit. Refer to the Installation
Instructions for proper anti-tip
bracket installation.
•Remove all tape and packaging wrap before using
the appliance. Destroy the carton and plastic
bags after unpacking the appliance. Never allow
children to play with packaging material. Do not remove
the wiring label and other literature attached to the
appliance. Do not remove model/serial number plate.
•Proper Installation. Be sure your appliance is
properly installed and grounded by a qualified
technician in accordance in the United States
with the National Electrical Code ANSI/NFPA No.
70-latest edition, and local code requirements,
and in Canada with CSA C22.1 PART 1-latest
edition and local code requirements. Install only
per installation instructions provided in the literature
package for this range.
Ask your dealer to recommend a qualified technician
and an authorized repair service. Know how to
disconnect the electrical power to the appliance at the
circuit breaker or fuse box in case of an emergency.
•User Servicing. Do not repair or replace any
part of the appliance unless specifically
recommended in the manuals. All other servicing
should be done only by a qualified technician to
reduce the risk of personal injury and damage to the
appliance.
•Never modify or alter the construction of an
appliance by removing leveling legs, panels, wire
covers, anti-tip brackets/screws, or any other
part of the product.
WARNING
Stepping, leaning, sitting or pulling down on the
door or the drawer of this appliance can result
in serious injuries and also cause damage to the
appliance. Do not allow children to climb or play around
the appliance. The weight of a child on an open door may
cause the appliance to tip, resulting in serious burns or other
injury. An open drawer when hot may cause burns.
WARNING
Do not use the oven for storage.
•Storage in or on Appliance. Flammable materials
should not be stored in an oven, near surface
burners. This includes paper, plastic and cloth items,
such as cookbooks, plastic ware and towels, as well
as flammable liquids. Do not store explosives, such
as aerosol cans, on or near the appliance. Flammable
materials may explode and result in fire or property
damage.
CAUTION
Do not store items of interest to children in the
cabinets above the appliance. Children climbing on
the cooktop to reach items could be seriously injured.
•Do not leave children alone. Children should not
be left alone or unattended in the area where an
appliance is in use. They should never be allowed to
sit or stand on any part of the appliance.
3
Important Safety Instructions
•DO NOT TOUCH SURFACE UNITS, AREAS NEAR
THESE UNITS, OVEN HEATING ELEMENTS OR
INTERIOR SURFACES OF THE OVEN. Both surface
units and oven heating elements may be hot even
though they are dark in color. Areas near surface
units may become hot enough to cause burns. During
and after use, do not touch, or let clothing or other
flammable materials touch these areas until they have
had sufficient time to cool. Among these areas are the
cooktop, surfaces facing the cooktop, the oven vent
openings and surfaces near these openings, oven door
and window.
IMPORTANT INSTRUCTIONS FOR USING
YOUR cooktop
•Wear Proper Apparel. Loose-fitting or hanging
garments should never be worn while using the
appliance. Do not let clothing or other flammable
materials contact hot surfaces.
•Know which knob controls each surface heating
unit. Place pan of food on the element before turning
it on, and turn the element off before removing the
pan.
WARNING
NEVER use your appliance as a space heater to
heat or warm the room.
•Do Not Use Water or Flour on Grease Fires.
Smother the fire with a pan lid, or use baking
soda, a dry chemical or foam-type extinguisher.
• When heating fat or grease, watch it closely. Fat
or grease may catch fire if allowed to become too hot.
•Use Only Dry Pot holders. Moist or damp pot
holders on hot surfaces may result in burns from
steam. Do not let the pot holders touch hot surface
units. Do not use a towel or other bulky cloth instead of
a pot holder.
•Do Not Heat Unopened Food Containers. Buildup
of pressure may cause the container to burst and
result in injury.
•Remove the oven door from any unused
appliance if it is to be stored or discarded.
IMPORTANT
Do not attempt to operate the appliance during a
power failure. If the power fails, always turn off
the unit. If the unit is not turned off and the power
resumes, the appliance will not operate and an error
message will be displayed. Once the power resumes,
reset the clock and the oven function.
CAUTION
Electronic controllers can be damaged by cold
temperatures. When you use your appliance for
the first time, or if it has not been used for a long
period of time, make sure that it has been exposed
to a temperature above 0°C/32°F for at least 3
hours before connecting it to the power supply.
•Use Proper Pan Size—This appliance is equipped with
one or more surface burners of different sizes. Select
utensils having flat bottoms large enough to cover the
surface unit. The use of undersized utensils will expose
a portion of surface heating unit to direct contact and
may result in ignition of clothing. Proper relationship of
utensil to the surface will also improve efficiency.
• Utensil Handles Should Be Turned Inward
and Should Not Extend Over Adjacent Surface
Units—To reduce the risk of burns, ignition of
flammable materials, and spillage due to unintentional
contact with the utensil.
• Do not use Searing Grill on the cooktop—The
Searing grill is not designed for use on the cooktop.
Doing so may result in a fire.
• Never Leave Surface Units Unattended—Boilovers
cause smoking and greasy spillovers that may ignite, or
a pan that has boiled dry may melt.
• Protective Liners—Do not use aluminum foil to line
oven bottom or any other part of the appliance. Only
use aluminum as recommended for baking if used as a
cover placed on the food. Any other used of protective
liners or aluminum foil may result in a risk of electric
shock or fire or a short circuit.
• Glazed Cooking Utensils—Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for cooktop service without breaking
due to the sudden change in temperature. Check the
manufacturer’s recommendations for cooktop use.
• Do Not Use Decorative Surface Burner Covers.
If an element is accidentally turned on, the decorative
cover will become hot and possibly melt. Burns will
occur if the hot covers are touched. Damage may also
be done to the cooktop.
4
Important Safety Instructions
FOR GLASS COOKTOP ONLY
•Do Not Clean or Operate a Broken Cooktop— If
cooktop should break, cleaning solutions and spillovers
may penetrate the broken cooktop and create a
risk of electric shock. Contact a qualified technician
immediately.
•Clean Cooktop Glass with Caution— If a wet
sponge or cloth is used to wipe spills on a hot cooking
area, be careful to avoid a steam burn. Some cleaners
can produce harmful fumes if applied to a hot surface.
•Avoid Scratching the Cooktop Glass with Sharp
Objects.
IMPORTANT SAFETY INSTRUCTIONS FOR
USING YOUR OVEN
•Use Care When Opening Oven Door—Stand to
the side of the appliance when opening the door of a
hot appliance. Let hot air or steam escape before you
remove or replace food in the oven.
•Keep Oven Vent Ducts Unobstructed. The oven is
vented at the front above the oven door. Touching the
surfaces in this area when the oven is operating may
cause severe burns. Also, do not place plastic or heatsensitive items on or near the oven vent. These items
could melt or ignite. WARNING
NEVER cover any slots, holes or passages in
the oven bottom or cover an entire rack with
materials such as aluminum foil. Doing so blocks
air flow through the oven and may cause carbon
monoxide poisoning. Aluminum foil linings may trap
heat, causing a fire hazard.
•Placement of Oven. Always place oven/Warm &
Serve Drawer (if equipped) racks in desired location
while appliance is cool. Remove all utensils from the
rack before removing rack. If rack must be moved while
oven is hot, use extreme caution. Use pot holders and
grasp the rack with both hands to reposition. Do not let
pot holders contact the hot oven element or interior of
the oven/Warm & Serve Drawer (if equipped).
• Do not touch a hot oven light bulb with a damp
cloth. Doing so could cause the bulb to break.
Disconnect the appliance or shut off the power to the
appliance before removing and replacing the bulb.
IMPORTANT SAFETY INSTRUCTIONS FOR
CLEANING YOUR OVEN
•Clean the appliance regularly to keep all parts
free of grease that could catch fire. Exhaust fan
ventilation hoods and grease filters should be kept
clean. Do not allow grease to accumulate. Greasy
deposits in the fan could catch fire. Refer to the hood
manufacturer’s instructions for cleaning.
•Cleaners/Aerosols—Always follow the manufacturer’s
recommended directions for use. Be aware that excess
residue from cleaners and aerosols may ignite causing
damage and/or injury.
•Clean in the self-cleaning cycle only the parts of
the appliance listed in this Owner’s Guide. Before
using the self-cleaning cycle of the appliance, remove
all utensils stored in the appliance.
•Do not clean the oven door gasket. The door
gasket is essential for a good seal. Care should be
taken not to rub, damage or move the gasket.
•Do not use oven cleaners. No oven cleaner or oven
liner protective coating of any kind should be used in or
around any part of the appliance.
•Remove oven racks. Oven racks color will change if
left in the oven during a self-cleaning cycle.
CAUTION
The health of some birds is extremely sensitive to the
fumes given off during the self-clean cycle of any wall
oven. Move birds to another well ventilated room.
• Do not use a broiler pan without its insert. Broiler
pan and grid allow dripping fat to drain and be kept
away from the high heat of the broiler.
• Do not cover the broiler grid or oven bottom
with aluminum foil. Exposed fat and grease could
ignite.
Save these instructions for future reference.
5
FEATURES AT A GLANCE
1
2
3
4
5
6
Your built-in range Features:
1.
2.
3.
4.
5.
6.
Electronic oven control with kitchen timer.
Left front element control and electronic display.
Left rear element control and electronic display.
Right rear element control and electronic display.
Right front element control and electronic display.
Keep warm zone control.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Lower oven self-clean door latch.
Lower oven oven vent.
Broil element.
Self-cleaning oven interior.
Lower oven convection bake cooking system.
Oven interior light with removable cover.
Adjustable interior oven rack(s).
Large 1-piece oven door handle.
Full width lower oven door with window.
Upper oven door with window.
17. 6” single radiant element.
18. Keep warm radiant element.
19. 6” single radiant element.
20. 6”/9” double radiant element.
21. 9”/12” single radiant element.
22. Ceramic glass cooktop.
17
20
22
6
18
16
8
7
9
10
12
11
13
14
19
21
14
15
 NOTE
The features shown for your appliance may vary
according to model type & color.
BEFORE Setting surface controls
The electronic surface element control
(ESEC)
The Electronic Surface Element Control (ESEC) feature
includes digital display windows. The ESEC feature
provides a numeric digital setting for the radiant surface
element positions on the cooktop. These settings work
the same way as normal knob setting indicators work
except the settings are displayed in digital windows.
The available ESEC display settings
The ESEC control provides various heat levels from Hi
(Figure 2) to Lo (Figure 5) and OFF (Figure 1). The
settings between 3.0 and 9.5 increase or decrease in
increments of .5 (1/2). The settings between 1.2 and
3.0 are Simmer settings which decrease or increase in
increments of .2 (1/5) to Lo (Figure 5; lowest Simmer
setting) for more precise settings at lower heat levels. Use
the Recommended Surface Setting Chart to determine the
correct setting for the kind of food you are preparing.
Fig. 2
Figure 1
Figure 2
Figure 3
Figure 6
Figure 7
ESEC power failure indicator message (PF)
When the range is first plugged in or when the power
supply to the range has been interrupted, the ESEC
control will display the message "PF" (Power Failure;
Figure 6). After a few seconds the "PF" message will
disappear from the display.
ESEC hot element indicator message (HE)
After using any of the single or dual radiant element
positions the cooktop will become very hot. Even after
turning the control knob to OFF, the cooktop will remain
hot for some time. The ESEC control monitors the
temperature of the cooktop and displays the message
“HE” (hot element) warning when the cooktop is still too
hot to touch (Figure 4). If the HE message appears in the
window, the control can still be turned on again for use.
ESEC error indicator message (Er)
An error message will be displayed (glowing “Er”) at
power up (or after a power failure) if ANY of the surface
control knobs were left in the ON positions (Figure 7).
If a power failure should occur, be sure to set all of the
surface control knobs to the OFF position. This will reset
the surface controls.
Once the surface controls have been set to the OFF
positions, the surface controls should return to normal
operation. If the surface controls do not function and
the “Er” message remains in any display after following
these procedures, contact your authorized servicer for
assistance.
ESEC Lockout Feature ( - - )
The ESEC feature will not operate during a Self-Clean
cycle or when the Lockout feature is active. Whenever
the Lockout feature is active, “ - - “ will appear in any
ESEC digital display windows (See Figure 8) to show that
all surface elements can not be activated.
Figure 4
Figure 5
Figure 8
Control knobs shown are typical only.
Surface cooking settings
Use the chart to determine the correct setting for the
type of food you are preparing.
Note: The size and type of cookware used will influence
the setting needed for best cooking results.
Recommended Setting for Surface Element
Setting
Type of Cooking
HIGH (HI)
Start most foods; bring water to a boil
and pan broiling.
MEDIUM HIGH
(8-10)
Continue a rapid boil; frying, deep fat
frying.
MEDIUM (6)
Maintain a slow boil; thicken sauces
and gravies; steaming vegetables.
MEDIUM LOW
(2 - 4)
Keep foods cooking; poaching and
stewing.
LOW (LO)
Keep warm, melting and simmering.
 NOTE
Radiant elements have a limiter that allows the element
to cycle on and off, even at the HI setting. This helps to
prevent damage to the ceramic smooth top. Cycling at
the HI setting is normal and can occur if the cookware
is too small for the radiant element or if the cookware
bottom is not flat.
7
BEFORE Setting surface controls
Using proper cookware
About the radiant surface elements
Cookware should have flat bottoms that make good
contact with the entire surface heating element (Figure
1). Check for flatness by rotating a ruler across the
bottom of the cookware (Figure 2).
For efficient cooking, turn off the element several minutes
before cooking is complete. This will allow residual heat
to complete the cooking process.
The size and type of cookware used will influence the
setting needed for best cooking results. Be sure to follow
the recommendations for using proper cookware as
illustrated in Figures 1 & 2.
The element temperature rises gradually and evenly.
As the temperature rises, the element will glow red. To
maintain the selected setting the element will cycle on and
off. The heating element retains enough heat to provide a
uniform and consistent heat during the off cycle.
 NOTE
Radiant elements have a limiter that allows the element
to cycle on and off, even at the HI setting. This
helps to prevent damage to the ceramic smooth top.
Cycling at the HI setting is normal and can occur if the
cookware is too small for the radiant element or if the
cookware bottom is not flat.
Be sure to read detailed instructions for ceramic glass
cooktop cleaning in the General Care & Cleaning
section and Before You Call checklist section of this
Use and Care Guide.
Cookware material types
The cookware material determines how evenly and quickly
heat is transferred from the surface element to the pan
bottom. The most popular materials available are:
Figure 1
Aluminum- Excellent heat conductor. Some types
of food will cause it to darken (Anodized aluminum
cookware resists staining & pitting). If aluminum pans
slide across the ceramic glass cooktop, they may leave
metal marks which will resemble scratches. Remove
these marks immediately.
Copper- Excellent heat conductor but discolors easily. May
leave metal marks on ceramic glass (see Aluminum above).
Stainless steel- Slow heat conductor with uneven cooking
results. Is durable, easy to clean and resists staining.
Figure 2
About the ceramic glass cooktop
The ceramic cooktop has radiant surface elements
located below the surface of the glass. The design of the
ceramic cooktop outlines the area of the surface element
underneath. Be sure to match the pan size with the
diameter of the element outline on the cooktop and only
flat-bottom cookware should be used.
The type and size of cookware, the number of surface
elements in use and their settings, are all factors that
will affect the amount of heat that will spread to areas
beyond the surface elements. The areas surrounding the
elements may become hot enough to cause burns.
8
Cast iron- A poor heat conductor however will retain
heat very well. Cooks evenly once cooking temperature is
reached. Not recommended for use on ceramic cooktops.
Porcelain-enamel on metal- Heating characteristics will
vary depending on base material. Porcelain-enamel coating
must be smooth to avoid scratching ceramic cooktops.
Glass- Slow heat conductor. Not recommended for
ceramic cooktop surfaces because it may scratch the glass.
 NOTE
Due to the high intensity of heat generated by the
surface elements, the glass surface will turn light green
when the element will be turned off. This phenomenon
is normal and the glass will come back to its original
white color after it has completely cooled down. (White
glass cooktops only).
Setting surface controls
Single radiant surface elements
The cooktop has 2 SINGLE radiant surface elements: the
left rear position and the right rear position (Figure 1).
To Operate the Single Radiant Surface Elements
1. Place correctly sized cookware on the radiant surface
element.
2. Push in and turn the surface control knob in either
direction to the desired setting (Figure 2). Start most
cooking operations on a higher setting and then turn
to a lower setting to finish cooking. Each surface
element provides a constant amount of heat at each
setting. A glowing red surface heating area extending
beyond the bottom edge of the cookware indicates
the cookware is too small for the surface heating
area.
3. When cooking has completed, turn the surface
control knob to OFF before removing the cookware.
Figure 1
 NOTE
See Recommended Setting for Surface Element table on
page 7.
CAUTION
Do not place plastic items such as salt and
pepper shakers, spoon holders or plastic
wrappings on cooktop when it is in use. These
items could melt or ignite. Potholders, towels or
wooden spoons could catch fire if placed too close to
the surface elements.
CAUTION
Do not allow aluminum foil, or ANY material that
can melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they will
damage the ceramic cooktop.
Figure 2 - Control knob shown is typical only.
CAUTION
Radiant surface elements may appear to have cooled
after they have been turned off. HE (Hot Element)
message will turn on and will continue to glow until
the glass cooktop has cooled down to a moderate
level. The glass surface may still be hot and burns
may occur if the glass surface is touched before the
indicator light has turned OFF. The message may
remain on even though the controls are turned OFF.
9
Setting surface controls
Dual Surface Radiant Element
The cooktop is equipped with 1 or 2 dual radiant surface
elements located at the left front and the right front
position (Figure 1). Symbols around the knob are used
to indicate which coil of the dual radiant element will
heat. The symbol indicates that only the inner coil will
heat (Figure 2). The
symbol indicates that both inner
and outer coils will heat (Figure 3). You may switch from
either coil setting at any time during cooking.
To Operate the Dual Surface Element
1. Place correctly sized cookware on the dual surface
element.
2. Push in and turn the control knob to the inner coil
symbol for smaller cookware (Figure 2) or to inner
and outer coil symbol for larger cookware (Figure 3).
Turn the knob to adjust the setting if needed. Start
most cooking operations on a higher setting and then
turn to a lower setting to finish cooking. Each surface
element provides a constant amount of heat at each
setting. A glowing red surface heating area extending
beyond the bottom edge of the cookware indicates the
cookware is too small for the surface heating area.
3. When cooking has completed, turn the surface
control knob to OFF before removing the
cookware.
Figure 1
Figure 2
Figure 3
 NOTE
See Recommended Setting for Surface Element table on
page 7.
CAUTION
CAUTION
Do not place plastic items such as salt and pepper
shakers, spoon holders or plastic wrappings on
cooktop when it is in use. These items could melt or
ignite. Potholders, towels or wooden spoons could catch
fire if placed too close to the surface elements.
CAUTION
Do not allow aluminum foil, or ANY material that
can melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they will
damage the ceramic cooktop.
10
Radiant surface elements may appear to have cooled
after they have been turned off. HE (Hot Element)
message will turn on and will continue to glow until
the glass cooktop has cooled down to a moderate
level. The glass surface may still be hot and burns
may occur if the glass surface is touched before the
indicator light has turned OFF. The message may
remain on even though the controls are turned OFF.
Setting surface controls
Keep warm zone
The purpose of the keep warm zone is to keep hot
cooked foods at serving temperature. Use the keep warm
feature to keep cooked foods hot such as: vegetables,
gravies, casseroles, soups, stews, breads, pastries and
oven-safe dinner plates.
Always start with hot food. It is not recommended to
heat cold food on the keep warm zone. All food placed
on the keep warm zone should be covered with a lid to
maintain quality.
For best results, when warming pastries or breads,
the cover should have an opening to allow moisture
to escape. Do not use plastic wrap to cover food.
Plastic may melt onto the surface and be very
difficult to clean. Use only plates, utensils and
cookware recommended for oven and cooktop use on the
keep warm zone.
To Set the keep warm zone control
NOTE: The controls and indicator light are located on the
control panel.
1. Touch the on●off pad (Fig. 4) at the keep warm zone
control position. The keep warm indicator light will
flash.
Note: If no further pads are touched within 25 seconds
the request to power the keep warm zone ON will clear.
2. At the keep warm controls position touch temp once
to turn ON the the warm zone at the LO (Fig. 3) power
level.
3. Each touch of temp will increase the power levels.
The keep warm zone has 3 power levels from LO (Fig.
1) through MED (Fig. 2) to HI (Fig. 3) and back to LO.
The power level may be adjusted at any time while
the keep warm zone is ON.
4. When it is time to serve the food, touch the on●off
pad once to turn the keep warm zone OFF. The keep
warm zone indicator light will turn OFF.
Figure 1
Figure 2
CAUTION
The keep warm zone will not glow red when it is hot,
but becomes hot enough to cause burns. Avoid placing
hands on or near the keep warm zone until the keep
warm zone hot surface indicator light is OFF. Always
use potholders or oven mitts when removing food from
the keep warm zone as cookware and plates will be
hot.
CAUTION
Do not place plastic items such as salt and pepper
shakers, spoon holders or plastic wrappings on
cooktop when it is in use. These items could melt or
ignite. Potholders, towels or wooden spoons could catch
fire if placed too close to the surface elements.
Do not allow aluminum foil, or ANY material that
can melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they will
damage the ceramic cooktop.
Keep warm zone temperature selection
Refer to the keep warm zone table for recommended
heating levels. If a particular food is not listed, start with
the medium level, and adjust as needed. Most foods can
be kept at serving temperatures by using the medium
level.
Keep warm zone recommended food settings table
Food Item
Setting
Bacon
HI
Hamburger Patties
HI
Poultry, Pork Chops
HI
Fried Foods, Pizza
HI
Gravies, Casseroles
MED
Vegetables, Eggs
MED
Roasts (Beef, Pork, Lamb)
MED
Biscuits, Pastries
MED
Rolls, hard
MED
Rolls (soft)
LO
Empty Dinner Plates
LO
Figure 3
Figure 4
11
BEFORE SETTING OVEN CONTROLS
Installing Upper Oven Rack Supports
Air circulation in the oven
To install oven rack support, insert it into the two brackets
on the oven wall interior and push down as shown in the
illustration to the right.
If using 1 rack, place in center of oven. If using multiple
racks, stagger cookware as shown.
For best air circulation and baking results allow 2-4"
(5-10 cm) around the cookware for proper air circulation
and be sure pans and cookware do not touch each other,
the oven door, sides or back of the oven cavity. The hot
air must circulate around the pans and cookware in the
oven for even heat to reach around the food.
To remove the oven rack support for a self-clean cycle, pull
up the support to disengage it from the brackets.
Single Oven Rack
Upper Oven Rack Positions
Multiple Oven Racks
4
3
2
1
 NOTE
Always use caution when removing food from the oven.
Oven vents
location
Rack
positions
Arranging Lower Oven Racks
Always arrange oven racks when THE oven is
cool (Prior to operating the oven). Always use
oven mitts when using the oven.
To remove an oven rack, pull the rack forward until it
stops. Lift up front of rack and slide out.
To replace an oven rack, fit the rack onto the guides
on the oven walls. Tilt the front of the rack upward and
slide the rack back into place.
4
3
2
1
Rack
positions
Recommended Rack Positions
Food
Broiling meats, chicken or fish
Cookies, cakes, pies, biscuits & muffins
Using a single rack
Using two racks
Using multiple racks
Frozen pies, angel food cake, yeast, bread, 1
or 2 casseroles, small cuts of meat or poultry
Turkey, roast or ham
12
Upper Oven Lower Oven
1 or 2
4
2
-
2 or 3
2 and 4
2, 3 and 4
1 or 2
1 or 2
-
1
The upper oven is
vented at the back
of the cooktop and
the lower oven is
vented at the trim
between the ovens.
When an oven is on,
warm air is released
through its vent. This
venting is necessary for
proper air circulation
in the oven and good
baking results. DO
NOT BLOCK OVEN
VENTS. Never close
off the openings with
aluminium foil or any
other material.
CAUTION
Some models are equipped with a blower
which runs in baking and self-cleaning mode
to keep all internal components at a cool
temperature. The blower may keep running
even if the oven has been turned off, until the
components have cooled down.
BEFORE SETTING OVEN CONTROLS
Types of oven racks
Your built-in range may be equipped with one or more of
the oven racks styles shown;
•Flat handle oven rack.
•Flat oven half rack.
•EffortlessTM oven rack.
Figure 1
Flat handle oven rack
CAUTION
Always use pot holders or oven mitts when adjusting the
oven racks. Wait until the oven has completely cooled if
possible. Oven racks may be HOT and may cause burns.
The Flat Oven Handle Rack has an handle to facilitate
the sliding of the rack when large amount of foods weight
on it.
The Flat Oven Half Rack has a removable insert that
can provide extra space for larger food items. The right
half rack portion may still be used for other food items
like a casserole dish (See Figure 2 & 3). To remove the
insert, squeeze on the left front insert side (See Figure
5) of the rack and tilt out clockwise. To reinstall, insert
rear hooks at back of insert (See figure 5) and lay insert
down. Make sure both insert front hooks snap into rack
(See figure 6).
Do not use cookware that extends beyond the edge
of the Flat Half Rack. For best results, allow 2 inches
between the pan placed on the rack and oven side or
rear walls.
Figure 2
Flat half oven rack - Closed position
Figure 5
Figure 3
Flat half oven rack - Open position
Figure 6
Figure 4
EffortlessTM oven rack
13
BEFORE SETTING OVEN CONTROLS
The Effortless™ oven rack system
Some models are equipped with a special oven rack
system that automatically partially extends the oven rack
from the interior oven glides to assist in easier access to
your food items. This feature works whenever the oven
door is opened or closed.
To assemble the Effortless™ Oven Rack system:
1. Locate all required parts. You will need the supplied
oven rack (Effortless™ Oven Rack is a flat rack with a
special dark coating on the left and right rack sides)
and the 2 supplied chrome connector arms.
2. Open the oven door. Be sure the oven is completely
cool before proceeding.
3. Place the oven rack in positions 1, 2 or 3 only (see
previous page to verify positions). Be sure the rack
connector brackets are at the rear of the range and
pointing towards oven bottom (See Figure 2).
4. Assemble one connector arm at a time. With the oven
door open and the oven rack in place, install one end
of the connector arm to the hole in the door connector bracket (Figure 1) and the other end in the hole
in the rack connector bracket (Figure 2 and as in
Figure 3). The oven rack may need to be adjusted in
or out in the rack position to match the length of the
connector arm.
5. While holding the connector arm in place, twist the
connector arm so the ends of the connector arm
point upwards (See Figures 4 & 5). The connector
arm should now be locked into position.
6. Repeat steps 4 and 5 for the other connector arm.
7. Once both connector arms are properly in place, be
sure to test the oven rack operation by gently closing
the oven door. The oven rack should move in and out
of the oven freely when the door is opened or closed.
CAUTION
REMOVE ALL OVEN RACKS and parts before
starting a self-clean cycle. If the oven racks are left
in the oven during the self-clean cycle, the glide ability
of the Effortless Oven Rack system will be damaged
and will cause all oven racks to loose their shiny
finish and or turn blue. Remove ALL oven racks and
clean according to instructions provided in the Care &
Cleaning section of this manual.
Make sure the oven and oven racks are COMPLETELY
cooled and safe to touch before attempting to assemble
or disassemble the Effortless™ Oven Rack system.
Never pick up hot oven rack parts.
14
Door
connector
bracket
Rack
connector
bracket
Figure 2
Figure 1
Oven rack
Connector arm
Connector arm
Open oven door
Figure 3 - Assembly of the Effortless oven rack
TM
Connector arm
Figure 4
Connector arm
Left and right
door connector
brackets with
connector arm ends
shown in locked position
(pointing upwards)
Figure 5
Figure 6 - Effortless™ oven rack after assembly
Setting OVEN controls
Control pad features
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each
feature and function follow later in this Use & Care Guide.
20
1
2
5
3
4
12
6
13
7
8
9
10
14
15
16
17
11
18
19
21
1.Upper pad—Use to activate the upper oven for
cooking operation.
2.Lower pad—Use to activate the lower oven for
cooking operation.
3. Oven light pad—Use to turn the oven light ON and
OFF.
4. Oven lockout pad—Use to lock the oven door and
the control panel pads.
5. Quick preheat pad—Use to quickly raise oven to
cooking temperature.
6. Bake pad—Use to select the bake cooking feature.
7. Broil pad—Use to select the broil cooking feature.
8. Convect pad (lower oven only)—Use to select
between the Convection Bake, Convection Roast and
Convection Broil cooking features.
9. Pizza pad—Use to select the pizza cooking feature.
10.Nuggets pad—Use to select the chicken nuggets
cooking feature.
11.Warm pad—Use to keep the dishes and food warm
until served
12.Convec convert pad (lower oven only)—Use to
convert a regular recipe temperature to a convection
temperature.
13.Self clean pad—Use to select the self cleaning
feature.
14.Delay start pad—Use to program a Delayed Timed
Bake or Delay Self-Cleaning cycle start time.
15.Bake time pad—Use to enter the length of the
baking time.
16.Clock pad—Use to set the time of day.
17.Timer on-off pad—Use to set or cancel the Timer.
The Timer does not start or stop cooking.
18.+1 min pad—Use to add a minute to the timer
feature.
19.Start pad—Use to start all oven features (not used
with Oven Light).
20.Numeric pad—Use to enter temperatures and
times.
21.Cancel pad—Use to cancel any oven feature previously
entered except the time of day and minute timer.
Important Things to Know Before Setting any Oven Cooking Feature
Temperature Visual Display
This appliance has been factory pre-set to start any
BAKE, CONVECTION BAKE, CONVECTION ROAST
or PREHEAT feature with the oven set temperature
automatically set for 350°F. The BROIL or CONVECTION
BROIL features are pre-set at 550°F. However if desired, the
oven set temperature may be adjusted at any time during
the cooking process. You may also choose to add a BAKE
TIME or DELAY START with most of the functions listed
above, unless specified in their corresponding section.
 NOTE
The upper oven is not equipped with a convection fan &
element. All the associated convection cooking features
will not be available in this oven.
Your oven is equipped with a temperature visual display.
When a cooking mode is set, the actual temperature will
be shown in the display and will rise as the unit preheat.
When the unit has reached its target temperature, a chime
will sound to remind you to place the food in the oven.
This feature will be active with some cooking modes;
BAKE, convection bake, convection roast
and pizza.
 NOTE
The lowest temperature that can be displayed is 100°F.
15
Setting OVEN controls
Minimum and Maximum Control Pad Settings
All of the features listed below have minimum and maximum time or temperature settings that may be entered into the
control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout pad is delayed 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature.
FEATURE
PREHEAT
BAKE
BROIL
CONVECTION BAKE
CONVECTION ROAST
CONVECTION BROIL
PIZZA
NUGGETS
TIMER
CLOCK TIME
DELAY START
BAKE TIME
12
24
12
24
12
24
12
24
Hr.
Hr.
Hr.
Hr.
Hr.
Hr.
Hr.
Hr.
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
SELF CLEAN TIME
MINIMUM TEMP. /TIME MAXIMUM TEMP. /TIME
170°F/77°C
550°F/288°C
170°F/77°C
550°F/288°C
400°F/205°C
550°F/288°C
170°F/77°C
550°F/288°C
170°F/77°C
550°F/288°C
400°F/205°C
550°F/288°C
170°F/77°C
550°F/288°C
170°F/77°C
550°F/288°C
0:01 Min.
11:59 Hr./Min.
0:01 Min.
11:59 Hr./Min.
1:00 Hr./Min.
12:59 Hr./Min.
0:00 Hr./Min.
23:59 Hr./Min.
1:00 Hr./Min.
12:59 Hr./Min.
0:00 Hr./Min.
23:59 Hr./Min.
0:01 Min.
5:59 Hr./Min.
0:01 Min.
5:59 Hr./Min.
2 hours
4 hours
Setting the Clock
The SET CLOCK pad is used to set the clock. The clock may
be set for 12 or 24 hour time of day operation. The clock
has been preset at the factory for the 12 hour operation.
When the range is first plugged in, or when the power
supply to the range has been interrupted, the timer in the
display will flash.
To set the clock (example below for 1:30)
1. Press CLOCK. “CLO” will appear in the display.
2. Press 1 3 0 pads to set the time of day to 1:30. “CLO”
will stay in the display.
3. Press START. “CLO” will disappear and the clock will
start.
16
Changing between 12 or 24 hour time of day display
1. Press and hold CLOCK for 6 seconds. “CLO” will appear
in the display.
2. CONTINUE holding the pad until “12Hr dAY” or “24Hr
dAY” appears in the display and the control beeps
once.
3. Press SELF CLEAN to switch between the 12 and 24
hour time of day display. The display will show either
“12Hr dAY” or “24Hr dAY”.
4. Press START to accept the change or press CANCEL to
reject the change.
5. Reset the correct time as described in To set the Clock
above. Please note that if the 24 hour time of day mode
was chosen, the clock will now display time from 0:00
through 23:59 hours.
Setting OVEN controls
Setting Continuous Bake or 6 Hour Energy Saving
The TIMER and SELF CLEAN pads control the Continuous
Bake or 6 Hour Energy Saving features. The oven control has
a factory preset built-in 6 Hour Energy Saving feature that
will shut off the oven if the oven control is left on for more
than 6 hours. The oven can be programmed to override this
feature for Continuous Baking.
To set the control for Continuous Bake or 6 Hour
Energy Saving features
1. Press and hold TIMER for 6 seconds.
After 6 seconds “6Hr OFF” or “StAY On” will appear
in the display and the control will beep once.
2. Press SELF CLEAN to switch between the 6 Hour Energy
Saving and continuous bake features.
Note: “6Hr OFF” in the display indicates the control is set for
the 6 Hour Energy Saving mode and “StAY On” indicates
the control is set for the Continuous Bake feature.
3. Press START to accept the change (display will return to
time of day) or press CANCEL to reject the change.
Setting Temperature Display —
Fahrenheit or Celsius:
Setting Silent Control Operation
The DELAY START and SELF CLEAN pads control the
Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without
sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned
to operating with all the normal sounds and beeps.
To change control from normal sound operation to
silent control operation
1. To tell if your range is set for normal or silent operation
press and hold DELAY START. “-- --” will appear and
“DELAY” will flash in the display. After 6 seconds “bEEP
On” or “bEEP OFF” will appear in the display.
2. Press SELF CLEAN to switch between normal sound
operation and silent operation mode. The display will
show either “bEEP On” or “bEEP OFF”.
Note: If “bEEP On” appears, the control will operate with
normal sounds and beeps. If “bEEP OFF” appears,
the control is in the silent operation mode.
3. Press START to accept the change or press CANCEL
to reject the change.
Note: The control will always beep at the end of a minute
timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.
The BROIL and SELF CLEAN pads control the Fahrenheit
or Celsius temperature display modes. The oven control can
be programmed to display temperatures in Fahrenheit or
Celsius. The oven has been preset at the factory to display
in Fahrenheit.
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
BROIL and hold it for 6 seconds; “550°” will appear
and “BROIL” will flash in the display and a beep will
sound. If “FAhrnht” appears, the display is set to show
temperatures in Fahrenheit. If “CELSIUS” appears, the
display is set to show temperatures in Celsius.
2. Press SELF CLEAN to switch between Fahrenheit or
Celsius display modes. The display will show either
“FAhrnht” or “CELSIUS”.
3. Press START to accept the change or press CANCEL
to reject the change.
17
Setting OVEN controls
Setting MINUTE Timer
The TIMER ON.OFF pad controls the Minute Timer feature.
The Minute Timer serves as an extra timer in the kitchen
that will beep when the set time has run out. It does not
start or stop cooking. The Minute Timer feature can be
used during any of the other oven control functions. Refer
to “Minimum and Maximum Control Pad Settings” for time
amount settings.
To set the Minute Timer (example for 5 minutes)
1. Press TIMER ON.OFF. “-- --” will appear in the
display.
2. Use the number pads to set the desired time in the
display; press 5.
3. Press START. The time will begin to count down with
“5:00” in the display.
Note: If START is not pressed the timer will return to the
time of day after 25 seconds.
4. When the set time has run out, “End” will show in
the display. The clock will sound with 3 beeps every 5
seconds until TIMER ON.OFF is pressed.
To cancel the Minute Timer before the set time has
run out
1. Press TIMER ON.OFF. The display will return to the time
of day.
Setting + 1 Min Feature
The + 1 MIN pad is used to set the Add 1 Minute feature.
When the + 1 MIN pad is pressed, 1 minute is added to
the Minute Timer feature if this feature is already active.
If the Minute Timer feature is not active and the + 1 MIN
pad is pressed, the Minute Timer feature will become active
and will begin counting down from 1 minute.
18
Setting Lockout Feature
The
pad controls the Lockout feature. The Lockout
feature automatically locks the oven doors, the control
panel and the cooktop. It does not disable the Minute
Timer or the interior oven lights.
To activate the Lockout feature
1. Press and hold
for 3 seconds.
2. After 3 seconds “Loc” and “Control” will appear, a
beep will sound, “UPPER”, “LOWER” and “DOOR” will
flash in the display. Once the oven door is locked the
“DOOR” will stop flashing and remain on along with
the “Loc”, “Control” and the icon will appear.
To reactivate normal operation:
1. Press and hold
for 3 seconds. A beep will sound.
The “UPPER”, “LOWER” and “DOOR” will flash in the
display until the oven door has completely unlocked and
the icon will disappear.
2. The unit is again fully operational.
 NOTE
The surface elements cannot be activated when the
Lockout feature is active (see the section: The electronic
surface element control (ESEC)).
Setting OVEN controls
Setting Quick Preheat
Setting Bake
The QUICK PREHEAT pad controls the Quick Preheat
feature. The Preheat feature will bring the oven up to
temperature and then indicate when to place the food in
the oven. Use this feature when recipes call for preheating.
Preheating is not necessary when roasting or cooking
casseroles. The oven can be programmed to preheat at any
temperature between 170°F to 550°F.
The BAKE pad controls normal baking. If a rapid preheating
is preferred, refer to the QUICK PREHEAT feature for
instructions. The oven can be programmed to bake at any
temperature from 170°F to 550°F.
To set the Preheat temperature for 375°F
1. Arrange the interior oven racks.
2. Press UPPER or LOWER to select oven.
3. Press QUICK PREHEAT. “350” will appear in the display.
If a preheat of 350°F is needed, press START.
4. Press 3 7 5.
5. Press START. “PRE” will be displayed while the oven is
preheating.
6. Press CANCEL when baking is complete or to cancel the preheat feature.
 NOTE
After the oven has reached the desired temperature (this
example, 375°F) the control will beep and the “PRE” light
will turn off, the BAKE feature will activate and oven target
temperature will be displayed. If you missed hearing the
beep, you can tell that the oven has reached preheat
temperature if you see the oven temperature showing in
the oven display. Once the oven has preheated, place
food in the oven. The preheat temperature can only be
changed while the “PRE” message is displayed.
To change Preheat temperature while oven is
preheating (ex: changing from 375°F to 425°F)
If it is necessary to change the preheat temperature while
the oven is preheating to the original temperature:
1. Press UPPER or LOWER to select oven.
2. While preheating, press QUICK PREHEAT. “375” will
appear in the display.
3. Enter the new preheat temperature. Press 4 2 5.
4. Press START. “PRE” will appear in the display.
Note: A beep will sound once the oven temperature reaches
425°F and the display will show “425°”.
5. When baking is complete press CANCEL.
 NOTE
While in preheat mode, the convection fan (lower oven
only) will be activated during the first rise of temperature
to allow the oven to reach its target temperature faster.
The Bake, Broil and Convection (lower oven only) elements
will also cycle for a better heat distribution.
Baking Tips:
• Preheat your oven before using the bake mode.
• During preheat, the bake, broil elements and the
convection fan and element (lower oven only) are used
in cycle to quickly heat the oven.
• Use only one rack and center the pans as much as
possible on rack 2 or 3.
• If using two racks, place the oven racks in positions 2
and 4.
• Allow 2” to 4” (5,1 to 10,2cm) around the utensil(s) for
proper air circulation.
• Be sure the pans do not touch each other, the door,
sides or back of the oven.
To set the Bake Temperature to 375°F
1. Arrange the interior oven racks.
2. Press UPPER or LOWER to select oven.
3. Press BAKE, “350” will appear in the display. If a bake
of 350°F is needed, press START.
4. Press 3 7 5.
5. Press START. The actual temperature will be displayed.
A beep will sound once the oven temperature reaches
375°F and the display will show “375°”.
6. Place food in the oven.
 NOTE
Pressing CANCEL will stop the feature at any time.
To change the Bake Temperature
(example: changing from 375°F to 425°F)
1. Press UPPER or LOWER to select oven.
2. After the oven has already been set to bake at 375°F
and the oven temperature needs to be changed to 425°F,
press BAKE and “375” will appear in the display.
3. Press 4 2 5. “BAKE” will continue to flash and “425°”
will appear in the display.
4. Press START. The actual temperature will be
displayed.
 NOTE
During the first rise of temperature, the convection fan
(lower oven only) will be activated to allow the oven to
reach its target temperature faster. The Bake, Broil and
Convection (lower oven only) elements will also cycle for
a better heat distribution.
19
SETTING OVEN CONTROLS
Setting Convection Bake (lower oven
only)
4
This mode of cooking enables you to obtain the best culinary
results when baking with multiple pans and racks. Multiple
rack baking may slightly increase cook time for some foods
but the overall result is time saved. Some food may cook
faster and more evenly with Convection Bake. Convection
baking uses the three elements and a fan to circulate
the oven’s heat evenly and continuously within the oven.
The oven can be programmed for Convection baking at
any temperature between 170°F to 550°F with a default
temperature of 350°F.
Convection Baking Tips:
•Always preheat your oven before using the Convection
Bake mode.
•During preheat, the 3 elements and the convection fan
are used in cycle to quickly heat the oven.
•If your recipe cooking temperature has already been
converted for convection baking there is no need to
reduce your oven temperature. If your recipe has not
had the temperature converted for convection baking
you can easily reduce using the Convec Convert feature.
Please see Convec Convert section on next page for
further instruction on temperature conversion.
•Use tested recipes with times adjusted for convection
baking when using this mode. Time reductions will
vary depending on the amount and type of food to be
cooked.
•When using Convection Bake with a single rack, place
oven rack in position 2 or 3. If cooking on multiple racks,
place the oven racks in positions 2 and 4 or 2, 3 and
4.
•Most bakeries (except cakes) should be baked on pans
with no sides or very low sides to allow heated air to
circulate around the food.
•Food baked on pans with a dark finish will cook faster.
3
2
1
Oven Rack Positions
Figure 2
To set the oven for Convection Bake and temperature
to 375°F
1. Arrange interior oven racks.
2. Press LOWER to select oven.
3. Press CONVECT. “CONVECT” and “BAKE” will flash
and “350” will appear in the display. If a Convection
Bake of 350°F is needed, press START.
4. Press 3 7 5. “CONVECT” and “BAKE” will keep flashing
and “375°” will appear in the display.
5. Press START. The actual oven temperature and the fan
icon will be displayed. A beep will sound once the oven
temperature reaches 375°F and the display will show
“375°”, “CONVECT”, “BAKE” and the fan icon.
6. Place food in the oven.
 NOTE
Pressing CANCEL will stop the feature at any time.
Benefits of Convection Bake:
— Multiple rack baking.
— Some foods cook faster, saving time and energy.
— No special pans or bakeware needed.
 NOTE
The convection fan will start AS SOON AS the oven is
set for Convection Bake. The display will show an icon
of rotating fan within a square. This rotating fan icon
indicates when the Convection Fan is operating. The Bake,
Broil and Convection elements will also cycle for a better
heat distribution.
 NOTE
Air circulation during Convection Bake
Figure 1
20
The upper oven is not equipped with a convection fan &
element. All the associated convection cooking features
will not be available in this oven.
SETTING OVEN CONTROLS
Setting Convec CONVERT (lower oven
only)
Setting Convection Roast (lower oven
only)
The Convec Convert pad is used to automatically convert
a standard baking recipe for convection baking. When
set properly, this feature is designed to display the actual
converted (reduced) temperature in the display. Convection
Convertion may ONLY be used with a Convection Bake
cooking mode. It can be used with the features Delay
Start and Bake Time (see their sections for directions).
If convection conversion is used with the Bake Time and
Delay Start features, “CF” (check food) will be displayed
when 75% of the bake time complete. At this time the oven
control will sound 3 long beeps at regular intervals until
baking had finished. When the bake time has completely
finished the control will display “End” and beep at regular
interval until the CANCEL pad is pressed.
This mode is best for cooking tender cuts of beef, lamb, park
and poultry. Use this mode when cooking speed is desired.
The Convection Roasting gently browns the exterior and
seals in the juices. Convection roasting uses the hidden
bake element, the hidden convection element, the broil
element and a fan to circulate the oven’s heat evenly and
continuously within the oven. The oven can be programmed
for Convection Roasting at any temperature between 170°F
to 550°F with a default temperature of 350°F.
 NOTE
To use this feature with the BAKE TIME option, the
BAKE TIME pad must be pressed before the CONVEC
CONVERT pad.
To set the oven for Convection Bake with a standard
baking recipe temperature of 400°F:
1. Arrange interior oven racks.
2. Press LOWER to select oven.
3. Press CONVEC. “CONVECT” and “BAKE” will flash
and “350” will appear in the display.
4. Press 4 0 0. “CONVECT” and “BAKE” will keep flashing
and “400°” will appear in the display.
5. Press CONVEC CONVERT. As soon as the convection
convert pad is pressed, the oven will start heating. The
temperature displayed will be 25°F lower than what it
used to be. The actual oven temperature and the fan
icon will be displayed. A beep will sound once the oven
temperature reaches 375°F and the display will show
“375°”, “CONVECT”, “BAKE” and the fan icon.
5. Place food in the oven.
 NOTE
When using a Bake Time under 20 minutes, the Convection
Convert will not beep and display the “CF” message.

NOTE
The upper oven is not equipped with a convection fan &
element. All the associated convection cooking features
will not be available in this oven.
Convection Roasting Tips:
• Use a broiler pan and grid, and a roasting rack (available
by mail order). The broiler pan will catch grease spills
and the grid will help prevent spatters. The roasting rack
will hold the meat.
• Place an oven rack on rack position 1 (offset rack).
• No preheat is needed in convection roast.
• Make sure the roasting rack is securely seated on the
grid in the broiler pan. The roasting rack fits on the grid
allowing the heated air to circulate under the food for even
cooking and helps to increase browning on the underside
(available by mail order only).
• There is no need to reduce the convection temperature or
to use the Convection Convert feature with this cooking
mode.
• DO NOT use the broiler pan without the grid or cover
the grid with aluminum foil (available by mail order).
• Always pull the rack out to the stop position before
removing food.
• Position food (fat side up) on the roasting rack.
To set a Convection Roast Temperature of 375°F:
1. Arrange oven racks and place food in the oven.
2. Press LOWER to select oven.
3. Press CONVECT; “350” will be displayed; “CONVECT”
and “BAKE” will flash.
4. Press CONVECT again; “350” will be displayed;
“CONVECT” and “ROAST” will flash.
5. Enter the desired roasting temperature using the number
pads 3 7 5.
6. Press START; The actual oven temperature will be
displayed, “CONVECT”, “ROAST” and the fan icon will
be displayed. The Bake, Broil and Convection elements
will also cycle for a better heat distribution.
 NOTE
Pressing CANCEL will stop the feature at any time.
 NOTE
The Bake, Broil and Convection elements will cycle for a
better heat distribution.
21
SETTING OVEN CONTROLS
Setting Convection BROIL (lower oven
only) Use this mode for thicker cuts of meat, fish and
poultry. The Convection Broiling gently browns the exterior
and seals in the juices. Convection broiling uses the broil
element and a fan to circulate the oven’s heat evenly and
continuously within the oven. The oven can be programmed
for Convection Broiling at any temperature between 400°F
to 550°F with a default temperature of 550°F.
Convection Broiling Tips:
•For optimum browning, preheat the broil element for 5
minutes.
•Broil one side until the food is browned; turn and cook
on the second side. Season and serve.
•Always pull the rack out to the “stop” position before
turning or removing food.
• Always use a broiler pan and its grid when broiling
(available by mail order). It allows the dripping grease to
be kept away from the high heat of the broil element.
• DO NOT use the broil pan without the insert (available
by mail order). DO NOT cover the broil pan insert
with foil. The exposed grease could catch fire.
•If using a Searing Grill (available by mail order), preheat
the grill for 5 to 10 minutes before placing your meat.
• Convection broiling is generally faster than conventional
broiling. Check for doneness at the minimum
recommended time.
To set a Convection Broil Temperature of 500°F:
1.Arrange interior oven racks.
2. Press LOWER to select oven.
3. Press CONVECT; “350” will be displayed; “CONVECT”
and “BAKE” will flash.
4. Press CONVECT again; “350” will be displayed;
“CONVECT” and “ROAST” will flash.
5. Press CONVECT again; “550” will be displayed;
“CONVECT” and “BROIL” will flash.
6. Enter the desired roasting temperature using the number
pads 5 0 0.
7. Press START; “550”, “CONVECT”, “BROIL” and the
fan icon will be displayed.
8. After 5 minutes of preheat, place food in the oven.
 NOTE
Pressing CANCEL will stop the feature at any time.
Accessories available via the enclosed brochure:
Broiler
Insert
Searing
Grill
WARNING
Should an oven fire occur, leave the oven door closed and
turn off the oven. If the fire continues, throw baking soda
on the fire or use a fire extinguisher. DO NOT put water
or flour on the fire. Flour may be explosive and water can
cause a grease fire to spread and cause personal injury.
 NOTE
The upper oven is not equipped with a convection fan &
element. All the associated convection cooking features
will not be available in this oven.
Broiler Pan
& Insert
Broiler
Pan
Figure 1
Figure 2
CAUTION
Always use this cooking mode with the oven door closed
or the convection fan will not turn on.
Electric Oven Convection Broiling Table Recommendations
Food Item
Steak 1” thick
Upper Oven Lower Oven
Rack Position Rack Position
Cook Time
Temperature
Setting
1st side
2nd side
Doneness
4th
1st
550° F
6:00
4:00
Rare
4th
1st
550° F
7:00
5:00
Medium
Pork Chops 3/4” thick
4th
1st
550° F
8:00
6:00
Well
Chicken - Bone In
3rd
1st
450° F
20:00
10:00
Well
Chicken - Boneless
4th
1st
450° F
8:00
6:00
Well
Fish
3rd
1st
500° F
13:00
-
Well
Shrimp
3rd
1st
550° F
5:00
-
Well
Hamburger 1” thick
4th
1st
550° F
9:00
7:00
Medium
4th
1st
550° F
10:00
8:00
Well
22
SETTING OVEN CONTROLS
Setting BAKE TIME
Setting DELAY START
Bake Time allows the oven to be set to cook for a specific
length of time and shut off automatically.
The BAKE, CONVECT BAKE, BAKE TIME and DELAY
START pads control the Delayed Time Bake feature. The
automatic timer of the Delayed Time Bake will turn the oven
on and off at the time you select in advance.
The oven will shut off and will beep when the countdown
is finished. This feature can be used with Bake, Convection
Bake, Convection Roast, Pizza and Nuggets cooking
modes.
To program the oven to begin baking immediately
and to shut off automatically (example: BAKE at
350°F for 30 minutes):
1. Be sure the clock is set for the correct time of day.
2. Arrange interior oven rack(s) and place the food in the
oven.
3. Press UPPER or LOWER to select oven.
4. Press BAKE, “350” will appear in the display.
5. Press START. The actual oven temperature will appear
in the display.
6. Press BAKE TIME. “-- --” will appear in the display.
7. Enter the desired baking time by pressing 3 0.
8. Press START. Once the Timed Bake feature has started,
the current time of day will appear in the display.
 NOTE
Baking time can be set for any amount of time between
1 minute to 6 hours. The time remaining can be shown in
the timer section of the display by pressing BAKE TIME
at any moment of the cooking. Once Bake Time has started
baking, a beep will sound when the oven temperature reaches
the set temperature.
Press CANCEL when baking has finished or at any time to
cancel the Timed Bake feature. A Bake Time of “0” minute
can also be entered to cancel the Bake Time feature and
keep the oven in its current cooking mode.
When the timed bake finishes:
1. “End” and the time of day will show in display. The
oven will shut off automatically.
2. The control will beep 3 times. The control will continue
to beep 3 times every 30 seconds until CANCEL is
pressed.
 NOTE
If your clock is set for normal 12 hour display mode the
Delayed Timed Bake or Delayed Timed Convection Bake
cycle can never be set to start more than 12 hours in
advance. To set for Delayed Timed Bake or Delayed Timed
Convection Bake 12-24 hours in advance set the control
for the 24 hour time of day display mode.
To program the oven for a delayed BAKE start time
(example: baking at 375°F, starting at 5:30):
1.Be sure that the clock is set with the correct time of day.
2.Arrange interior oven rack and place the food in the oven.
3. Press UPPER or LOWER to select oven.
4.Press BAKE. “350” will appear in the display.
5.Enter the desired temperature; pressing 3 7 5.
6.Press START. The actual oven temperature will appear
in the display.
7.Press DELAY START.
8.Enter the desired start time; pressing 5 3 0.
9.Press START. When Delayed Time Bake starts, the set
oven temperature will appear, “DELAY”, “BAKE” and the
current time of day will appear in the display.
 NOTE
If it is desired to have the oven shut off automatically after
a set time; enter a BAKE TIME at this step.
10.When the desired start time is reached, the actual
oven temperature appears in display and “DELAY”
disappears. Oven starts to bake at the previously selected
temperature.
Press CANCEL when baking has completed or at any time
to cancel the Delayed Time Bake feature.
CAUTION
Use caution with the DELAY START features. Use the automatic timer when cooking cured or frozen meats and most fruits
and vegetables. Foods that can easily spoil such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator
first. Even when chilled, they should not stand in the oven for more than 1 hour before cooking begins, and should be
removed promptly when cooking is completed. Eating spoiled food can result in sickness from food poisoning.
23
SETTING OVEN CONTROLS
SETTING BROIL
This mode is best for meats, fish and poultry up to 1”
thick. Broiling is a method of cooking tender cuts of meat
by direct heat under the broil element of the oven. The
high heat cooks quickly and gives a rich, brown outer appearance. The BROIL pad controls the Broil feature. An
optional Searing Grill, Broiler Pan and Insert are available
via the enclosed accessories brochure (Figure 2 & 3). The
optional broil pan and broil pan insert used together allow
dripping grease to drain and be kept away from the high
heat of the oven broiler. The oven can be programmed
to broil at any temperature from 400°F to 550°F with a
default temperature of 550°F.
Broiling Tips:
•For optimum browning, preheat the broil element for 5
minutes.
•Broil one side until the food is browned; turn and cook
on the second side. Season and serve.
•Always pull the rack out to the “stop” position before
turning or removing food.
•Always use the broiler pan and its cover when broiling.
It allows the dripping grease to be kept away from the
high heat of the broil element (see Figure 2).
•For best broiling results, broil with the oven door in the
broil stop position (see Figure 1).
•If using a Searing Grill (available by mail order), preheat
the grill for 5 to 10 minutes before placing your meat.
•DO NOT use the broil pan without the insert. DO NOT
cover the broil pan insert with foil. The exposed
grease could catch fire.
Accessories available via the enclosed brochure:
Broiler
Insert
To set a Broil of 500°F:
1. Place the broiler pan insert on the broiler pan. Then place
the food on the broiler pan insert. DO NOT use the broiler
pan without the insert. DO NOT cover the broiler insert
with foil. The exposed grease could ignite.
2. Arrange the interior oven rack and place the broiler pan
on the rack. Be sure to center the broiler pan directly
under the broiler element. Make sure the oven door
is in the broil stop position (See Figure 1).
3. Preheat for 2 minutes before broiling.
4. Press UPPER or LOWER to select oven.
5. Press BROIL. “550” will appear in the display.
6. Press 5 0 0. If a lower broil temperature is desired
(minimum broil temperature setting is 400°F), press
the desired temperature before continuing to step 7.
7. Press START. The oven will begin to broil. “500°” will
appear in the display.
8. Broil on one side until
food is browned; turn
and cook on the second
side. Season and serve.
Note: Always pull the
rack out to the stop
Broil Stop Position
position before turning
Figure 1
or removing food.
8. To stop broiling press
CANCEL.
WARNING
Should an oven fire occur, leave the oven door closed and
turn off the oven. If the fire continues, throw baking soda
on the fire or use a fire extinguisher. DO NOT put water
or flour on the fire. Flour may be explosive and water can
cause a grease fire to spread and cause personal injury.
Searing
Grill
Broiler Pan
& Insert
Broiler
Pan
Figure 2
Figure 3
Electric Oven Broiling Table Recommendations
Food Item
Steak 1” thick
Upper Oven Lower Oven
Rack Position Rack Position
Cook Time
Temperature
Setting
1st side
2nd side
Doneness
4th
1st
550° F
6:00
4:00
Rare
4th
1st
550° F
7:00
5:00
Medium
Pork Chops 3/4” thick
4th
1st
550° F
8:00
6:00
Well
Chicken - Bone In
3rd
1st
450° F
20:00
10:00
Well
Chicken - Boneless
4th
1st
450° F
8:00
6:00
Well
Fish
3rd
1st
500° F
13:00
-
Well
Shrimp
3rd
1st
550° F
5:00
-
Well
Hamburger 1” thick
4th
1st
550° F
9:00
7:00
Medium
4th
1st
550° F
10:00
8:00
Well
24
SETTING OVEN CONTROLS
SETTING NUGGETS
SETTING PIZZA
The NUGGETS pad has been designed to give optimum
cooking performance when cooking your favorite chicken
nuggets. In the lower oven, the Chicken Nuggets pad is
preset for a Convection Bake at (400°F) with a Bake Time of
18 minutes, ending with a Keep Warm setting. If needed, a
different target temperature or Bake Time than the presets
can be entered.
The PIZZA pad has been designed to give optimum cooking
performance when cooking your favorite pizza. The Pizza
pad let you choose a preset between a frozen pizza (425°F)
and a fresh pizza (400°F). If needed, a different target
temperature than the presets can be entered. Some fresh
pizza request using a broil feature for a few minutes, but
this is not part of the Pizza pad presets.
Nuggets Tips:
• For most type of chicken nuggets, preheating is not
required and the preset baking time of the feature will
give you optimum results.
• For larger chicken tenders, follow the preheating and
baking instructions on the box and only use a single
rack.
• For a single rack, use rack position 2.
• For multiple racks, use rack positions 2 and 3.
Pizza Tips:
To set Nuggets:
1. Arrange interior oven racks and place food in oven.
2. Press UPPER or LOWER to select oven.
3. Press NUGGETS pad. “CHI” will appear in the display. If
a different temperature than 400°F is needed, enter the
temperature now, using the keypad digits. If a different
Bake Time than 18 minutes is required, press BAKE
TIME and enter the desired time (or 0 for an untimed
baking).
 NOTE
The Chicken Nuggets feature is automatically programmed
to activate the Keep Warm feature when the cooking is
finished. “HLD” will be displayed for a maximum of 3 hours.
See the Keep Warm feature for more information.
4. Press START. The fan icon will appear in the display.
5. To turn OFF the Chicken Nuggets feature at any time
press CANCEL.
•Follow the instructions on the box for preheating and
baking times.
•For optimum cooking results, only bake one pizza at
once on rack position 2.
•Check the pizza at 75% of the maximum cook time
listed on the package.
To set Pizza for a frozen pizza:
1. Arrange interior oven racks.
2. Press UPPER or LOWER to select oven.
3. Press PIZZA pad. “Fro” will appear in the display. If a
different temperature than 425°F is needed, enter the
temperature now, using the keypad digits.
4. Press START. The fan icon and the actual oven
temperature will appear in the display.
5. Place the pizza in the oven when the beep is heard.
6. If needed, enter a BAKE TIME (see its section for further
details).
7. To turn OFF the Pizza feature at any time press
CANCEL.
To set Pizza for a fresh pizza:
1. Arrange interior oven racks.
2. Press UPPER or LOWER to select oven.
3. Press PIZZA pad twice. “Frh” will appear in the display.
If a different temperature than 400°F is needed, enter
the temperature now, using the keypad digits.
4. Press START. The fan icon and the actual oven
temperature will appear in the display.
5. Place the pizza in the oven when the beep is heard.
6. If needed, enter a BAKE TIME (see its section for further
details).
7. To turn OFF the Pizza feature at any time press
CANCEL.
25
SETTING OVEN CONTROLS
SETTING KEEP WARM
This mode is best for keeping oven baked foods warm for
serving after cooking has finished. The KEEP WARM pad
turns ON the Keep Warm feature and will maintain an oven
temperature of 170°F (77°C). The Keep Warm feature will
keep oven baked foods warm for serving up to 3 hours
after cooking has finished. After 3 hours the Keep Warm
feature will shut the oven OFF. The Keep Warm feature
may be used without any other cooking operations or can
be set to turn ON automatically after a BAKE TIME or
DELAYED BAKE TIME.
Keep Warm Tips:
•Always start with hot food.
•Do not use the Keep Warm feature to heat cold food.
•Food in heat-safe glass and glass ceramic containers
may need higher temperature settings compared to
food in regular containers.
•Avoid repeated openings of the oven, it will allow hot air
to escape and the food to cool.
•Aluminum foil may be used to cover food to increase
moisture content.
To set Keep Warm:
1. Arrange interior oven racks and place food in oven.
2. Press UPPER OVEN or LOWER OVEN to select oven.
3. Press KEEP WARM. “HLd” will appear in the display.
Note: If no pad is touched within 25 seconds the
request to turn ON Keep Warm feature will be
cancelled.
4. Press START. The oven icon will appear in the display.
5. To turn OFF the KEEP WARM at any time press
CANCEL.
To set Keep Warm to turn ON automatically:
1. Arrange interior oven racks and place food in oven.
Set the oven properly for Bake Time or Delayed
Bake Time. (See their respective sections for more
details).
2. Press UPPER OVEN or LOWER OVEN to select oven.
3. Press KEEP WARM. “HLd” will appear in the display.
Note: If no pad is touched within 25 seconds the
cooking will be cancelled.
4. Press START. “HLd” will disappear and the
temperature will be displayed. The Keep Warm mode
is set to turn ON automatically after Timed Bake has
finished. “HLd” will re-appear when the Timed Bake
has finished.
5. To turn the Keep Warm feature OFF at any time press
CANCEL.
 NOTE
Pressing CANCEL will stop the feature at any time.
26
SETTING OVEN CONTROLS
SETTING the Sabbath Feature (for use on
the Jewish Sabbath & Holidays)
The BAKE TIME and DELAY START pads are used to
set the Sabbath feature. The Sabbath feature may only be
used with the BAKE pad. The oven temperature may be
set higher or lower after setting the Sabbath feature (the
oven temperature adjustment feature should be used only
during Jewish Holidays), however the display will not visibly
show or provide any audible tones indicating whether the
change occurred correctly. Once the oven is properly set
using Bake with the Sabbath feature active, the oven will
remain continuously ON until cancelled. This will override
the factory preset 6-Hour Energy Saving feature.
If the oven light will be needed during the Sabbath, press
OVEN LIGHT
before activating the Sabbath feature.
Once the oven light is turned ON and the Sabbath feature
is active, the oven light will remain ON until the Sabbath
feature is turned OFF. If the oven light needs to be OFF,
be sure to turn the oven light OFF before activating the
Sabbath feature.
To Program the Oven to Begin Baking Immediately &
activate the Sabbath feature (example: baking at 350°F)
1. Be sure that the clock is set with the correct time of day.
2. Place the food in the oven.
3. Press UPPER or LOWER to select oven.
4. Press BAKE. “350°” appears in the display.
5. Press START. The actual oven temperature appears in
the display.
6. If you desire to set the oven control for a Bake Time
or DelayedBake Time do so at this time. If not, skip
this step and continue to step 8. Refer to the Bake
Time / Delay Start section for complete instructions.
Remember the oven will shut down after using Bake
Time or Delay Start and therefore may only be used
once during the Sabbath/Jewish Holidays. The maximum
Delayed Start Bake time is 11 hours & 59 minutes.
7. The oven will turn ON and begin heating.
8. Press and hold both the BAKE TIME and DELAY START
pads for at least 3 seconds. “SAb” will appear in the
display. Once “SAb” appears in the display the oven
control will no longer beep or display any further changes
and the oven is properly set for the Sabbath feature.
9. The oven may be turned OFF at any time by first pressing
CANCEL pad (this will turn the oven OFF only). To turn
OFF the Sabbath feature press and hold both the BAKE
TIME and DELAY START pads for at least 3 seconds.
“SAb” will disappear from the display.
IMPORTANT
It is not advised to attempt to activate any other program
feature other than BAKE while the Sabbath feature is
active. ONLY the following key pads will function after
setting the Sabbath feature; 0 to 9, BAKE, START &
CANCEL. All other keypads should not be used once
the Sabbath feature is properly activated.
 NOTE
You may change the oven temperature once baking has
started by pressing BAKE, the numeric key pads for the
temperature you want (example for 425°C press 4 2 5)
and then pressing START twice (for Jewish Holidays
only). Remember that the oven control will no longer
beep or display any further changes once the oven
is set for the Sabbath feature.
Should you experience a power failure or interruption, the
oven will shut off. When power is returned, “SF” (Sabbath
Failure) will be shown in the oven display and the cooktop
displays. The oven and cooktop will not turn back on
automatically. If your food was nearly fully cooked, you
may allow the trapped heat in the oven to finish the cooking
process. Otherwise, you should remove the food when the
power failure occurs, because you may only start the oven
once during the Sabbath/Jewish Holidays. After the Sabbath
observance turn OFF the Sabbath feature and the oven may
be used with all normal functions.
After the Sabbath observance turn OFF the Sabbath feature.
Press and hold both the BAKE TIME and DELAY pads for at
least 3 seconds. “SAb” will disappear from the display and
the oven may be used with all normal functions. For further
assistance, guidelines for proper usage, and a complete list
of models with the Sabbath feature, please visit the web at
http:\\www.star-k.org.
How the Electronic Surface Element Controls work
when the Sabbath feature is ON.
When your Oven Sabbath feature is ON, the Electronic
Surface Elements are also in Sabbath mode. This means
that all electronic surface element control displays show
“Sb”. The surface elements can be used even if the Sabbath
Feature is on.
To turn ON a Surface Element when the Oven Sabbath
Feature is active:
If you turn on a surface element when the oven Sabbath
feature is on, the electronic surface element control will
record that request and execute it with a 15-30 seconds
delay. So the element will start heating 15-30 seconds
after the surface element control was turned on. As the
oven control, the surface element display will not show the
setting because “Sb” is on in the displays. When necessary,
it is possible to adjust the power of the surface element but
you have to remember that the surface element control will
adjust the temperature with the same delay.
To turn OFF the Surface Element when the Oven
Sabbath Mode is active:
To shut off the surface element while the Sabbath feature
is ON, proceed as usual but take note that the element will
immediately turn off without any delay.
27
SETTING OVEN CONTROLS
Adjusting Oven Temperature
Oven light
The temperature in the oven has been pre-set at the
factory. When first using the oven, be sure to follow recipe
times and temperatures. If you think the oven is cooking
too hot or too cool for the temperature you select, you
can adjust the actual oven temperature to be more or less
than what is displayed. Before adjusting, test a recipe by
using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help
you to decide how much of an adjustment is needed.
Each oven is equipped with an oven light. The oven light will
turn on automatically, when the oven door is opened.
To adjust the oven temperature higher
1. Press UPPER or LOWER to select oven.
2. Press BAKE for 6 seconds. “UPO 00” will appear in
the display.
3. To increase the temperature use the number pads to enter
the desired change (Example 30°F) 3 0. The temperature
may be increased as much as 35°F (19°C).
4. Press START to accept the temperature change and the
display will return to the time of day. Press CANCEL to
reject the change if necessary.
2. Press OVEN LIGHT
To adjust the oven temperature lower
1. Press UPPER or LOWER to select oven.
2. Press BAKE for 6 seconds. 0° will appear in the
display.
3. To decrease the temperature use the number pads to
enter the desired change (Example -30°F) 3 0 and then
press SELF CLEAN. The temperature may be decreased
as much as 35°F (19°C).
4. Press START to accept the temperature change and the
display will return to the time of day. Press CANCEL to
reject the change if necessary.
 NOTE
• Each oven temperature can be individually adjusted.
• The oven temperature adjustments made with this feature
will not change the Self-Clean cycle temperature or the
Broil temperature.
• The oven temperature adjustments are permanent and
will stay forever in the unit memory unless you manually
change it again. Even a power outage will not reset
these changes. Follow the same procedure again if you
wish to change it to a different setting.
28
The oven light may be turned on when the door is closed by
using the oven light pad located on the control panel. The
oven light key will toggle the lights at full intensity.
To toggle the Oven Lights ON and OFF:
1. Press UPPER OVEN or LOWER OVEN to select oven.
.
The interior oven lights are covered with a glass shield held
by a wire holder. The glass shield must be in place whenever
the oven is in use.
To change the interior oven lights, see “Changing the oven
light” in the Care & Cleaning section.
SELF-CLEANING
SELF-CLEANING
What to Expect during Cleaning
A self-cleaning oven cleans itself with high temperatures
(well above normal cooking temperatures) which eliminate
soils completely or reduces them to a fine powdered ash
you can wipe away with a damp cloth.
While the oven is in operation, the oven heats to temperatures
much higher than those used in normal cooking. Sounds
of metal expansion and contraction are normal. Odor is
also normal as the food soil is being removed. Smoke may
appear through the oven vent.
IMPORTANT
Adhere to the following cleaning precautions:
• DO NOT use oven cleaners or oven protective coatings
in or around any part of the oven interior.
• DO NOT clean the oven door gasket. The woven material
of the oven door gasket is essential for a good seal.
Care should be taken not to rub, damage or remove
the gasket.
If heavy spillovers are not wiped up before cleaning, they
may flame and cause more smoke and odor than usual. This
is normal and safe and should not cause alarm. If available,
use an exhaust fan during the self-cleaning cycle.
CAUTION
• DO NOT use any cleaning materials on the oven door
gasket. Doing so could cause damage.
To avoid possible burns use care when opening the oven
door after the Self-Cleaning cycle. Stand to the side of
the oven when opening the door to allow hot air or steam
to escape.
• Remove the broiler pan and insert, all utensils
and any aluminum foil. These items cannot
withstand high cleaning temperatures and will
melt.
During the Self-Cleaning cycle, the outside of the range
can become very hot to the touch. DO NOT leave small
children unattended near the appliance.
• Completely remove ALL OVEN RACKS and ANY
ACCESSORIES. If the oven racks are not removed,
they will lose their special coating properties and
will no longer slide in and out of the oven cavity
effortlessly.
• Remove any excessive spillovers in the oven cavity
before starting the Self-Cleaning cycle. To clean, use
hot, soapy water and a cloth. Large spillovers can
cause heavy smoke or fire when subjected to high
temperatures. DO NOT allow food spills with a high sugar
or acid content (such as milk, tomatoes, sauerkraut,
fruit juices or pie filling) to remain on the surface as
they may leave a dull spot even after cleaning.
• Clean any soil from the oven frame, the door liner outside
the oven door gasket and the small area at the front
center of the oven bottom. These areas heat sufficiently
to burn soil on. Clean with soap and water.
The health of some birds is extremely sensitive to the
fumes given off during the Self-Cleaning cycle of any
range. Move birds to another well-ventilated room.
DO NOT line the oven walls, racks, bottom or any other
part of the range with aluminum foil. Doing so will
destroy heat distribution, produce poor baking results and
cause permanent damage to the oven interior (aluminum
foil will melt to the interior surface of the oven).
DO NOT force the oven door open. This can damage the
automatic door locking system. Use caution when opening
the door after the Self-Cleaning cycle is completed. The
oven may still be VERY HOT.
 NOTE
See additional cleaning information for the oven door in
the General Care & Cleaning section.
DO HAND
CLEAN FRAME
DO NOT HAND
CLEAN OVEN
DOOR GASKET
DO HAND
CLEAN DOOR
29
SELF-CLEANING
SETTING SELF-CLEAN CYCLE TIME LENGTH
The SELF CLEAN pad controls the Self-Cleaning feature. If
you are planning to use the oven directly after a self-clean
cycle remember to allow time for the oven to cool down
and the oven door to unlock. This normally takes about one
hour. So a 3 hour self-clean cycle will actually take about
4 hours to complete.
*It is recommend to use a 2 hour self-clean cycle for light
soils, a 3 hour cycle for average soils, and a 4 hour cycle
for heavy soils (to assure satisfactory results).
To set the controls for a 3 hour Self-Cleaning cycle
to start immediately and shut off automatically
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press UPPER or LOWER to select oven.
3. Press SELF CLEAN. “3:00” and CLn will show in the
display. The control will automatically clean for a 3 hour
period (default self-cleaning cycle time). For the first
10 seconds, “Remove Racks” will flash and beep to
remind you that the racks need to be removed.
 NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN
multiple times to toggle between 2, 3 or 4 hours.
4. Press START. The “DOOR” icon will flash.
5. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the
door has been locked the “DOOR” indicator light will
stop flashing and remain on and the icon will appear.
Also, the oven icon will appear in the display.
 NOTE
Allow about 15 seconds for the oven door lock to close.
When the Self-Clean Cycle is Completed
1. “HOT” will appear in the display. The time of day, the
“DOOR” and icon will remain in the display.
2. Once the oven has cooled down for approximately 1
HOUR, and the “DOOR” is no longer displayed, the
oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or fire in the oven:
1. Press CANCEL.
2. The oven door can only be opened after the oven has
cooled down for approximately 1 HOUR and the “DOOR”
and icons are no longer displayed.
The SELF CLEAN and DELAY START pads controls the
Delayed Self-Clean operation. The automatic timer will turn
the oven on and off at the time you select in advance.
To set the control for the Self-Cleaning Cycle to
start at a delayed time and shut off automatically
(example: 3 hour self-clean cycle to start at 4:30)
1. Be sure the clock is set with the correct time of day and
the oven door is closed.
2. Press UPPER or LOWER to select oven.
3. Press SELF CLEAN. “3:00” and CLn will show in the
display. The control will automatically clean for a 3 hour
period. For the first 10 seconds, “Remove Racks” will
flash and beep to remind you that the racks need to be
removed.
 NOTE
If a 2 or 4 hour clean time is desired, press SELF CLEAN
multiple times to toggle between 2, 3 or 4 hours.
4. Press START. The “DOOR” icon will flash.
5. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the door
has been locked the “DOOR” indicator light will quit
flashing and remain on and the icon will appear.
6. Press DELAY START. Enter the desired start time using
the number pads 4 3 0.
7. Press START. “DELAY”, “DOOR LOCKED” and
“CLEAN” icons will remain on.
8. The control will start the self-cleaning at the set start
time, for the period of time previously selected. At that
time, the icon “DELAY” will go out; “CLn” and oven
icon will appear in the display.
When the Self-Clean Cycle is Completed
1. “HOT” will appear in the display. The time of day, the
“DOOR” and icon will remain in the display.
2. Once the oven has cooled down for approximately 1
HOUR, and the “DOOR” is no longer displayed, the
oven door can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or fire in the oven:
1. Press CANCEL.
2. The oven door can only be opened after the oven has
cooled down for approximately 1 HOUR and the “DOOR”
and icons are no longer displayed.
 NOTE
The surface elements and the 2nd oven cannot be activated
when the Self-Clean feature is active (see the section: The
electronic surface element control (ESEC)).
30
Care & Cleaning (Cleaning Chart)
Cleaning various parts of your appliance
Before cleaning any part of the appliance, be sure all controls are turned off and the appliance is COOL. Remove
spillovers and heavy soiling as soon as possible. Regular cleaning will reduce the number of
major cleaning later.
Surfaces
How to Clean
Aluminum (trim pieces) &
Vinyl
Use hot, soapy water and a cloth. Dry with a clean cloth.
Glass, Painted and Plastic
Body Parts, Control Knobs
& Decorative Trim Pieces
Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of vinegar
and water. Follow by rinsing the area with clean water; dry and polish with a soft cloth.
Glass cleaners may be used if sprayed on a soft cloth first. DO NOT spray liquids directly
on the control pad and display area. Do not use large amounts of water on the control
panel - excess water on the control area may cause damage to the appliance. Do not
use other liquid cleaners, abrasive cleaners, scouring pads, or paper towels - they will
damage the finish. To remove control knobs, turn to the OFF position; grasp firmly and
pull straight off the shaft. To replace knobs after cleaning, line up the flat sides of both
the knob and the shaft; then push the knob into place.
Control Panels
Before cleaning the control panel, turn all controls to OFF and remove the control
knobs. To remove, pull each knob straight off the shaft. Clean as instructed above.
Squeeze excess water from the cloth before wiping the panel; especially when wiping
around the controls. Excess water in or around the controls may cause damage to the
appliance. To replace knobs after cleaning, line up the flat sides of both the knob and
the shaft; then push the knob into place.
Porcelain Enamel
Cooktop Surface, Below
Cooktop, Broiler Pan &
Insert (some models), Door
Liner, Oven Bottom
Clean broiler pan and insert (available by mail order) in the dishwasher and dry upon
removal. If soils are not removed, follow the cooktop cleaning instructions below.
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a
1:1 solution of clear water and ammonia. If necessary, cover difficult spots with an
ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp
cloth, then scrub with a soap-filled scouring pad. Rinse and wipe dry with a clean cloth.
Remove all cleaners or the porcelain may become damaged during future heating. DO
NOT use spray oven cleaners on the cooktop.
Easy Care™ Stainless
Your range finish is made with Easy Care™ Stainless Steel. Clean the stainless with
S t e e l O v e n D o o r a n d warm soapy water using a clean sponge or cloth. Rinse with clean water and dry with a
Decorative Trim
soft clean cloth. DO NOT use ANY store bought cleaners like Stainless Steel cleaners or
any other types of cleaners containing any abrasive, chlorides, chlorines or ammonia.
It is recommended to use mild dish soap and water or a 50/50 solution of water and
vinegar.
Oven Racks
Remove racks. See «To remove and to replace an oven rack» under Oven vent(s) and
racks. Use a mild, abrasive cleaner, following manufacturer’s instructions. Rinse with
clean water and dry. After cleaning the racks, rub the sides of the racks with wax paper
or a cloth containing a small amount of baby oil or salad oil (this will make the racks
glide easier into the rack positions).
Oven Door
Use soap & water to thoroughly clean the top, sides and front of the oven door. Rinse
well. You may use a glass cleaner on the outside glass of the oven door. DO NOT
immerse the door in water. DO NOT spray or allow water or the glass cleaner to enter
the door vents. DO NOT use oven cleaners, cleaning powders or any harsh abrasive
cleaning materials on the outside of the oven door.
DO HAND
CLEAN FRAME
DO NOT HAND
CLEAN OVEN
DOOR GASKET
DO HAND
CLEAN DOOR
DO NOT clean the oven door gasket. The oven door gasket is made of a woven
material, on Self-Cleaning models, which is essential for a good seal. Care should be
taken not to rub, damage or remove this gasket.
31
Care & Cleaning
Ceramic glass cooktop cleaning &
maintenance
Consistent and proper cleaning is essential to
maintaining your Ceramic glass cooktop.
Prior to using your cooktop for the
first time, apply the recommended
CERAMA BRYTE® Cleaning Creme to
the ceramic surface. Clean and buff
with a non abrasive cloth or pad. This
will make cleaning easier when soiled
from cooking. The special cooktop
cleaning cream leaves a protective
finish on the glass to help prevent
scratches and abrasions.
Sliding aluminum or copper clad
bottom pans on the cooktop can
cause metal markings on the cooktop surface. These
marks should be removed immediately after the
cooktop has cooled using the cooktop cleaning cream.
Metal marks can become permanent if not removed prior
to future use.
Cookware (cast iron, metal, ceramic or glass) with rough
bottoms can mark or scratch the cooktop surface. Do
not slide anything metal or glass across the cooktop.
Do not use your cooktop as a cutting board or work
surface in the kitchen. Do not cook foods directly on the
cooktop surface without a pan. Do not drop heavy or
hard objects on the glass cooktop, or they may crack it.
Cleaning recommendations for the
ceramic glass cooktop
CAUTION
Before cleaning the cooktop, be sure the controls are
turned to OFF and the cooktop is COOL.
WARNING
DO NOT use a cooktop cleaner on a hot cooktop.
The fumes can be hazardous to your health, and can
chemically damage the ceramic glass surface.
For light to moderate soil:
Apply a few drops of CookTop® Cleaning Creme directly
to the cooktop. Use a paper towel or use a nonabrasive plastic type no-scratch pad to clean the
entire cooktop surface. Make sure the cooktop is cleaned
thoroughly, leaving no residue.
For heavy, burned on soil:
Apply a few drops of CookTop® Cleaning Creme directly
to the soiled area. Rub the soiled area using a nonabrasive plastic type no-scratch pad, applying pressure
as needed. Do not use the pad you use to clean the
cooktop for any other purpose.
IMPORTANT
Damage to the ceramic glass cooktop may occur if you
use an abrasive type scratch pad. Only use cleaning
products that have been specifically designed for
ceramic glass cooktop.
If soils remain, carefully scrape soils with a metal razor
blade scraper, holding scraper at a 30 degree angle to the
surface. Remove loosened soils, then apply a few drops
of cleaning cream and buff surface clean.
32
Care & Cleaning
Cleaning recommendations for the
ceramic glass cooktop (continued)
Plastic or foods with a high sugar content:
These types of soils need be removed immediately if spilled
or melted onto the ceramic cooktop surface. Permanent
damage (such as pitting of the cooktop surface) may occur
if not removed immediately. After turning the surface
elements OFF, use a razor blade scraper or a metal spatula
with a mitt and scrape the soil from the hot surface (as
illustrated). Allow the cooktop to cool, and use the same
method for heavy or burned on soils.
Do not use the following on the ceramic glass
cooktop:
• Do not use abrasive cleaners and scouring pads,
such as metal and some nylon pads. They may
scratch the cooktop, making it more difficult to
clean.
• Do not use harsh cleaners, such as chlorine
bleach, ammonia or oven cleaners, as they may
etch or discolor the cooktop.
Care and cleaning of stainless steel
Some models are equipped with stainless steel exterior
parts. Special care and cleaning are required for
maintaining the appearance of stainless parts. Refer
to the General Care & Cleaning table for detailed
cleaning instructions.
Changing oven light
CAUTION
Be sure the oven is unplugged and all parts are COOL
before replacing the oven light bulb. Do not turn
the oven light on during a self-cleaning cycle. High
temperature will reduce lamp life.
On some models an interior oven light will turn on
automatically when the oven is opened. The oven light
may be turned on when the door is closed by using the
oven light switch located on the Electronic Oven control.
The oven light bulb is covered with a glass shield held
in place by a wire holder. THIS GLASS SHIELD MUST
ALWAYS BE IN PLACE WHEN THE OVEN IS IN USE.
CAUTION
BE SURE OVEN IS COOL
• Do not use dirty sponges, cloths or paper
towels, as they can leave soil or lint on the
cooktop which can burn and cause Special
Caution for Aluminum Foil and Aluminum
Cooking Utensils
• Aluminum foil
Use of aluminum foil will damage the cooktop. Do not
use under any circumstances.
• Aluminum utensils
Since the melting point of aluminum is much lower
than that of other metals, care must be taken when
aluminum pots or pans are used. Pans that boil dry
may permanently damage cooktop by breaking, fusing
to, or marking it.
To Replace the Light Bulb:
1. Turn the power off at the main source.
2. Wear a leather-faced glove for protection against
possible broken glass.
3. Replace bulb with a 40 Watt appliance bulb only.
4. For self-cleaning oven, press wire holder to one side
to release glass shield, change bulb and be sure to
replace glass shield.
33
Care & Cleaning
Removing and replacing the liftoff lower oven door
4. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Figure 3).
CAUTION
The door is heavy. For safe, temporary storage, lay the
door flat with the inside of the door facing down.
Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks
are fully in place.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring or stressing the glass
may weaken its structure causing an increased risk
of breakage at a later time.
To Remove Oven Door:
1. Open oven door completely (horizontal with floor See Figure 1).
Around
10°
Oven door
Hinge
Figure 3
5. Close the door to the broil stop position (the oven door
will stop into this position just before fully closing).
6. With the oven door in the broil stop position, lift the
oven door hinge arms over the roller pins located on
each side of the oven frame (See Figure 4).
Door Hinge locations
with oven door fully open
Figure 1
2. Remove the connector arms of the EffortlessTM racks
from the door (see page 14).
3. Pull the door hinge locks on both left and right
door hinges down from the oven frame completely
towards the oven door (See Figure 2). A tool such as
a small flat-blade screwdriver may be required.
34
Figure 2
Figure 4
To Replace Oven Door:
1. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Figure 3).
2. Holding the oven door at the same angle as the
removal position, seat the hook of the hinge arm over
the roller pins located on each side of the oven door
frame (See Figure 4). The hook of the hinge arms
must be fully seated onto the roller pins.
3. Fully open the oven door (horizontal with floor - See
Figure 1).
4. Push the door hinge locks up towards and into the
oven frame on both left and right oven door hinges
(See Figure 2) to the locked position.
5. Close the oven door.
Care & Cleaning
Removing and Replacing the LiftOff Upper Oven Door
To Remove Oven Door:
1. Open the door to the fully opened position.
2. Pull up the lock located on both hinge supports and
engage it in the hinge lever hooks (Figure 1). You may
have to apply a little downward pressure on the door
to pull the locks fully over the hinge lever hooks.
To Replace Oven Door:
1. Grab the door by the sides; place the hinge supports
in the hinge slots. Open the door to the fully opened
position.
2. Disengage the lock from the hinge lever hooks on
both sides (Figure 3).
Hinge lever
Hinge lever
hook
Hinge
support
Lock engaged for door removal
Figure 1
3. Grab the door by the sides and pull the bottom of
the door up and toward you to disengage the hinge
supports. Keep pulling the bottom of the door toward
you while rotating the top of the door toward the
range to completely disengage the hinge levers
(Figure 2).
Lock in normal position
Figure 3
Note: Make sure the hinge supports are fully engaged
before unlocking the hinge levers.
3. Close the oven door.
CAUTION
The door is heavy. For safe, temporary storage, lay the
door flat with the inside of the door facing down.
Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven racks
are fully in place.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring or stressing the glass
may weaken its structure causing an increased risk
of breakage at a later time.
HINGE SLOT - Door removed
from the oven - Figure 2
4. To clean oven door, follow the instructions provided in
the General Care & Cleaning table.
35
Before you call (Solutions to Common Problems)
Oven baking
For best cooking results, heat the oven before baking cookies, breads, cakes, pies or pastries, etc. There is no need to
preheat the oven for roasting meat or baking casseroles.
The cooking times and temperatures needed to bake a product may vary slightly from your previously owned
appliance.
Baking Problems and Solutions Chart
Baking
Problems
Causes
Corrections
Cookies and
biscuits burn on
the bottom.
• Cookies and biscuits put into
the oven before the preheating
time is completed.
• Oven rack overcrowded.
• Allow oven to preheat to the selected temperature
before placing food in oven.
• Dark pan absorbs heat too fast.
• Choose pan sizes that will permit 5.1cm to 10.2cm
(2” to 4”) of air space on all sides when placed in
the oven.
• Use a medium-weight aluminum baking sheet.
Cakes too dark on
top or bottom.
• Cakes put into the oven before
preheating time is completed.
• Rack position too high or low.
• Oven too hot.
• Allow oven to preheat to the selected temperature
before placing food in the oven.
• Use proper rack position for baking needs.
• Set oven temperature 25°F/12°C lower than
recommended.
Cakes not done in
the center.
• Oven too hot.
• Set oven temperature 25°F/12°C lower than
recommended.
• Use pan size suggested in recipe.
• Use proper rack position and place pan so there is
5.1cm to 10.2cm (2” to 4”) of space on all sides of
pan.
Cakes not level.
• Range not level.
• Incorrect pan size.
• Pan not centered in oven.
• Pan too close to oven wall or
rack overcrowded.
• Pan warped.
• Oven too cool.
Foods not done
when cooking time
• Oven overcrowded.
is up.
• Oven door opened too
frequently.
36
• Place a marked glass measuring cup filled with water
on the center of the oven rack. If the water level
is uneven, refer to the installation instructions for
leveling the range.
• Be sure to allow 5.1cm to 10.2cm (2” to 4”) of
clearance on all sides of each pan in the oven.
• Do not use pans that are dented or warped.
• Set oven temperature 25°F/12°C higher than
suggested and bake for the recommended time.
• Be sure to remove all pans from the oven except the
ones to be used for baking.
• Open oven door only after shortest recommended
baking time.
Before you call (Solutions to Common Problems)
IMPORTANT
Before you call for service, review this list. It may save you time and expense. The list includes common
occurrences that are not the result of defective workmanship or materials in this appliance.
OCCURRENCE
POSSIBLE CAUSE/SOLUTION
Range is not level.
Poor installation. Place oven rack in center of oven. Place a level on the oven rack. Adjust
leveling legs at base of range until the rack is level. When range is level, cooktop may
appear out of alignment if countertop is not level.
Weak, unstable floor. Be sure floor is level and can adequately support range. If floor is
sagging or slopping, contact a carpenter to correct the situation.
Kitchen cabinet misalignment may make range appear to be unlevel. Be sure cabinets are
square and have sufficient room for range clearance.
Cabinets not square or are built in too tight. Contact a cabinet maker to correct the problem.
Cannot move
appliance easily. Contact builder or installer to make appliance accessible.
Appliance must be
accessible for service. Carpet interferes with range. Provide sufficient space so range can be lifted over carpet.
Entire range or oven Make sure cord/plug is plugged tightly into outlet.
does not operate.
Service wiring is not complete. Call an authorized servicer.
Electrical power outage. Check house lights to be sure. Call your local electric company for
service.
Cooktop control
displays any E code
error (ex.: E014)
Cooktop control has detected a fault or error condition. Try turning electrical power supply
OFF and back ON to cooktop in order to reset Cooktop main controls. If fault recurs, record
fault number and call an authorized servicer for assistance.
Oven control beeps
Electronic control has detected a fault condition. Press CANCEL to clear the display and stop
and displays any F
beeping. Reprogram oven. If fault recurs, record fault number. Press CANCEL and call an
code error (ex.: F11) authorized servicer for assistance.
Oven light does not
work.
Surface unit does
not heat.
Replace or tighten bulb. See Changing Oven Light section in this Use & Care Guide.
Electrical power outage. Check house lights to be sure. Call your local electric company for service.
No power to the appliance. Check steps under "Entire Range or Oven Does Not Operate" in
this Before you Call checklist.
Incorrect control setting. Make sure the correct control is on for the surface unit to be used.
Surface units too
hot or not hot
enough.
Incorrect control setting. Make sure the correct control is on for the surface unit to be used.
Metalmarks.
Sliding or scraping of metal utensils on cooktop surface. Do not slide metal utensils on
cooktop surface. Use a ceramic-glass cooktop cleaning cream to remove the marks.
"Cooktop Cleaning - Ceramic Glass Cooktop Models" section under General Cleaning.
Scratches or
abrasions on
cooktop surface.
Coarse particles such as salt or sand between cooktop and utensils can cause scratches. Be
sure cooktop surface and bottoms of utensils are clean before usage. Small scratches do not
affect cooking and will become less visible with time.
Lightweight or warped pans used. Use only flat, evenly balanced, medium or heavyweight
cookware. Flat pans heat better than warped pans. Cookware materials and weight of the
material affect heating. Heavy-and medium- weight pans heat evenly. Because lightweight
pans heat unevenly, foods may burn easily.
Cleaning materials not recommended for ceramic-glass cooktop have been used. See
"Cooktop Cleaning - Ceramic Glass Cooktop Models" section under General Cleaning.
Cookware with rough bottom has been used. Use smooth, flat-bottomed cookware.
Brown streaks or
specks.
Boilovers are cooked onto surface. Use razor blade scraper to remove soil. "Cooktop
Cleaning - Ceramic Glass Cooktop Models" section under General Cleaning.
37
before you call (Solutions to Common Problems)
OCCURRENCE
POSSIBLE CAUSE/SOLUTION
Areas of
discoloration with
metallic sheen.
Mineral deposits from water and food. Remove using a ceramic-glass cooktop cleaning
cream. Use cookware with clean, dry bottoms.
Poor baking results.
Many factors affect baking results. Make sure the proper rack position is used. Center
food in the oven and space pans to allow air to circulate. Allow the oven to preheat to the
set temperature before placing food in the oven. Try adjusting the recipes’ recommended
temperature or baking time. If you feel the oven is too hot or cool, see "Adjusting Your
Oven Temperature" section in the Electronic Oven Control Guide.
Fan noise during
cooking operation.
A cooling fan may automatically turn on and off to cool internal parts. It is normal, and the
fan may continue to run even after oven is turned off.
Flames inside oven
or smoking from
vent.
Excessive spillovers in oven. Set self-clean cycle for a longer cleaning time.
Oven smokes
excessively during
broiling.
Control(s) not set properly. Follow instructions under "Setting Oven Controls".
Excessive spillovers in oven. This is normal, especially for pie spillovers or large amounts of
grease on the oven bottom. Wipe up excessive spillovers before starting the self-clean cycle.
If flames or excessive smoke are present, stop the self-clean cycle and follow the steps
under "Stopping or Interrupting the Self-Cleaning Cycle" in the Electronic Oven Control
Guide.
Make sure oven is opened to Broil Stop Position.
Meat too close to the element. Reposition the rack to provide proper clearance between the
meat and the element. Preheat broil element. Preheat broil element for searing.
Grid on broiler pan wrong side up and grease not draining. Always place grid on the broiler
pan with ribs up and slots down to allow grease to drip into pan.
Grease has built up on oven surfaces. Regular cleaning is necessary when broiling
frequently. Old grease or food spatters cause excessive smoking.
Control(s) not set properly. Follow instructions under "Oven Cleaning" in the Electronic Oven
Control Guide.
Self-cleaning cycle
does not work.
Control(s) not set properly. Follow instructions under "Oven Cleaning" in the Electronic Oven
Control Guide.
Self-cleaning cycle was interrupted. Stop time must be 2 to 4 hours past the start time.
Follow steps under "Stopping or Interrupting the Self-Cleaning Cycle" in the Electronic Oven
Control Guide.
Soil not completely
removed after selfcleaning cycle.
38
Set Self-Clean cycle for a longer cleaning time.
Failure to clean bottom front, top of oven or door areas outside oven seal. These areas
are not in the Self-Cleaning area, but get hot enough to burn on food residue. Clean these
areas before starting the Self-Clean cycle. Burned-on residue may be cleaned with a stiff
nylon brush and water or nylon scrubber. Be careful not to damage the oven gasket.
NOTES
39
MAJOR APPLIANCE WARRANTY
Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux
will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or
workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.
Exclusions
This warranty does not cover the following:
1. Products with original serial numbers that have been removed, altered or cannot be readily
determined.
2. Product that has been transferred from its original owner to another party or removed outside the
USA or Canada.
3. Rust on the interior or exterior of the unit.
4. Products purchased "as-is" are not covered by this warranty.
5. Food loss due to any refrigerator or freezer failures.
6. Products used in a commercial setting.
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for
appliances not in ordinary household use or used other than in accordance with the provided
instructions.
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards,
shelves, etc., which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumable, or
knobs, handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry
trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not limited to
floors, cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIES WARRANTIES; LIMITATION OF REMEDIES
Customer’s sole and exclusive remedy under this limited warranty shall be product repair or
replacement as provided herein. Claims based on implied warranties, including warranties of
merchantability or fitness for particular purpose, are limited to one year or the shortest period
allowed by law, but not less than one year. Electrolux shall not be liable for consequential or
incidental damages such as property damage and incidental expenses resulting from any breach
of this written limited warranty or any implied warranty. Some states and provinces do not allow
the exclusion or limitation of incidental or consequential damages, or limitations on the duration of
implied warranties, so these limitations or exclusions may not imply to you. This written warranty
gives you specific legal rights. You may also have other rights that vary from state to state.
If You
Need
Service
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained contacting Electrolux at the addresses or phone numbers
below.
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major
Appliances North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by
Electrolux Canada Corp. Electrolux authorizes no person to change or add to any obligations under this warranty.
Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service
company. Product features or specifications as described or illustrated are subject to change without notice.
USA
1.800.944.9044
Electrolux Major Appliances
North America
P.O. Box 212378
Augusta, GA 30907
40
Canada
1.800.265.8352
Electrolux Canada Corp.
5855 Terry Fox Way
Mississauga, Ontario, Canada
L5V 3E4
Download PDF

advertising