Operating instructions | Frymaster BIH14 Fryer User Manual

Operation Manual
DVD AV Receiver
AVH-P4900DVD
English
Contents
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference.
Be sure to read this
! Playable discs 5
! DVD video disc region numbers 6
! When an operation is prohibited 10
Precautions
IMPORTANT SAFEGUARDS 3
To ensure safe driving 3
To avoid battery exhaustion 4
Before You Start
Information to User 5
For Canadian model 5
About this unit 5
About this manual 6
After-sales service for Pioneer products 6
Visit our website 7
Features 7
About WMA 8
About the SAT RADIO READY mark 9
To protect the LCD screen 9
For viewing LCD comfortably 9
What the marks on DVDs indicate 9
Protecting your unit from theft 10
Resetting the microprocessor 10
Operating this unit
What’s What 12
Basic Operations 13
Tuner 18
Built-in DVD player 20
Audio Adjustments 30
Setting up the DVD player 35
Initial Settings 38
Other Functions 41
2
En
Available accessories
XM tuner 45
SIRIUS Satellite Radio tuner 47
Playing songs on iPod 49
Multi-CD Player 51
DVD Player 54
TV tuner 56
Digital Signal Processor 58
Additional Information
Troubleshooting 70
Error messages 72
Understanding auto TA and EQ error
messages 72
Understanding messages 73
Handling guideline of discs and player 74
DVD discs 74
CD-R/CD-RW discs 74
Dual Discs 75
Compressed audio files on the disc 75
Using the display correctly 76
Language code chart for DVD 78
Terms 79
Specifications 82
Index 84
Section
Precautions
Please read all of these instructions regarding
your display and retain them for future reference.
1 Read this manual fully and carefully before operating your display.
2 Keep this manual handy as a reference for
operating procedures and safety information.
3 Pay close attention to all warnings in this
manual and follow the instructions carefully.
4 Do not allow other persons to use this system until they have read and understood
the operating instructions.
5 Do not install the display where it may (i)
obstruct the driver’s vision, (ii) impair the
performance of any of the vehicle’s operating systems or safety features, including air bags, hazard lamp buttons or (iii)
impair the driver’s ability to safely operate the vehicle.
6 Do not operate this display if doing so in
any way will divert your attention from
the safe operation of your vehicle. Always
observe safe driving rules and follow all
existing traffic regulations. If you experience difficulty in operating the system or
reading the display, park your vehicle in a
safe location and make necessary adjustments.
7 Please remember to wear your seat belt at
all times while operating your vehicle. If
you are ever in an accident, your injuries
can be considerably more severe if your
seat belt is not properly buckled.
8 Never use headphones while driving.
9 To promote safety, certain functions are
disabled unless the parking brake is on,
and the vehicle is not in motion.
10 Never set the volume of your display so
high that you cannot hear outside traffic
and emergency vehicles.
WARNING
! Do not attempt to install or service your
display by yourself. Installation or servicing of the display by persons without
training and experience in electronic
equipment and automotive accessories
may be dangerous and could expose you
to the risk of electric shock or other
hazards.
Precautions
IMPORTANT SAFEGUARDS
01
To ensure safe driving
WARNING
! LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF
THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
! To avoid the risk of damage and injury and the
potential violation of applicable laws, this unit
is not for use with a video screen that is visible
to the driver.
! To avoid the risk of accident and the potential
violation of applicable laws, the front DVD or
TV (sold separately) feature should never be
used while the vehicle is being driven. Also,
rear displays should not be in a location
where it is a visible distraction to the driver.
! In some countries or states the viewing of
images on a display inside a vehicle even by
persons other than the driver may be illegal.
Where such regulations apply, they must be
obeyed and this unit’s DVD features should
not be used.
En
3
Section
01
Precautions
When you attempt to watch a DVD, Video CD
or TV while driving, the warning VIDEO VIEWING IS NOT AVAILABLE WHILE DRIVING will
appear on the front display.
To watch a DVD, Video CD or TV on the front
display, park your vehicle in a safe place and
apply the parking brake.
Parking brake interlock
Certain functions (DVD/TV viewing and certain
touch panel keys) offered by this unit could be
dangerous and/or unlawful if used while driving. To prevent such functions from being
used while the vehicle is in motion, there is an
interlock system that senses when the parking
brake is set. If you attempt to use the functions
described above while driving, they will become disabled until you stop the vehicle in a
safe place, and (1) apply the parking brake, (2)
release the parking brake, and then (3) apply
the parking brake again. Please keep the
brake pedal pushed down before releasing the
parking brake.
To avoid battery exhaustion
Be sure to run the vehicle engine while using
this unit. Using this unit without running the
engine can result in battery drainage.
! When no power is supplied to this unit because of a replacement of the vehicle battery or for some similar reason, the
microcomputer of this unit is returned to
its initial condition except audio settings.
Although audio adjustment information is
stored in this unit for several hours, we recommend that you transcribe the data.
WARNING
Do not use with vehicles that do not feature an
ACC position.
4
En
Section
Before You Start
Alteration or modifications carried out without
appropriate authorization may invalidate the
user’s right to operate the equipment.
For Canadian model
This Class B digital apparatus complies with
Canadian ICES-003.
About this unit
The tuner frequencies on this unit are allocated for use in North America. Use in other
areas may result in poor reception.
WARNING
Handling the cord on this product or cords associated with accessories sold with the product
may expose you to chemicals listed on proposition 65 known to the State of California and other
governmental entities to cause cancer and birth
defects or other reproductive harm. Wash hands
after handling.
This product contains mercury. Disposal of this
material may be regulated due to environmental
considerations. For disposal or recycling information, please contact your local authorities or the
Electronics Industries Alliance: www.eiae.org.
CAUTION:
USE OF CONTROL OR ADJUSTMENT OR
PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
CAUTION:
THE USE OF OPTICAL INSTRUMENTS
WITH THIS PRODUCT WILL INCREASE
EYE HAZARD.
Before You Start
Information to User
02
CAUTION
! Do not allow this unit to come into contact
with liquids. Electrical shock could result.
Also, this unit damage, smoke, and overheat
could result from contact with liquids.
! Keep this manual handy as a reference for operating procedures and precautions.
! Always keep the volume low enough so that
you can hear sounds from outside the vehicle.
! Protect this unit from moisture.
! If the battery is disconnected or discharged,
the preset memory will be erased and must be
reprogrammed.
Important (Serial number)
The serial number is located on the bottom of
this unit. For your own security and convenience,
be sure to record this number on the enclosed
warranty card.
Playable discs
DVD, Video CD and CD discs that display the
logos shown below can be played back on this
player.
En
5
Section
Before You Start
02
DVD video
The illustration below shows the regions and
corresponding region numbers.
Video CD
About this manual
CD
Notes
is a trademark of DVD Format/Logo
Licensing Corporation.
! This player can only play back discs bearing
the marks shown above.
!
This unit features a number of sophisticated
functions ensuring superior reception and operation. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this unit’s potential
and to maximize your listening enjoyment.
We recommend that you familiarize yourself
with the functions and their operation by reading through the manual before you begin
using this unit. It is especially important that
you read and observe WARNINGs and CAUTIONs in this manual.
DVD video disc region numbers
DVD video discs that have incompatible region
numbers cannot be played on this player. The
region number of the player can be found on
the bottom of this unit.
6
En
After-sales service for
Pioneer products
Please contact the dealer or distributor from
where you purchased this unit for after-sales
service (including warranty conditions) or any
other information. In case the necessary information is not available, please contact the
companies listed below:
Please do not ship your unit to the companies
at the addresses listed below for repair without
advance contact.
Section
Before You Start
CANADA
Pioneer Electronics of Canada, Inc.
CUSTOMER SATISFACTION DEPARTMENT
300 Allstate Parkway
Markham, Ontario L3R OP2
1-877-283-5901
For warranty information please see the Limited Warranty sheet included with this unit.
Visit our website
Visit us at the following site:
1 Register your product. We will keep the details
of your purchase on file to help you refer to
this information in the event of an insurance
claim such as loss or theft.
2 Receive updates on the latest products and
technologies.
3 Download owner’s manuals, order product
catalogues, research new products, and
much more.
Features
Touch panel key operation
It is possible to operate this unit by using
touch panel key.
DVD video playback
It is possible to play back DVD video and DVDR/RW (video mode).
Remember that use of this system for commercial or public viewing purposes may constitute an infringement on the author’s rights
protected by the Copyright Law.
Video CDs featuring PBC compatibility
It is possible to play back Video CDs featuring
PBC (playback control).
Before You Start
U.S.A.
Pioneer Electronics (USA) Inc.
CUSTOMER SUPPORT DIVISION
P.O. Box 1760
Long Beach, CA 90801-1760
800-421-1404
02
CD playback
Music CD/CD-R/RW playback is possible.
MP3 file playback
You can play back MP3 files recorded on CDROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
! Supply of this product only conveys a license for private, non-commercial use and
does not convey a license nor imply any
right to use this product in any commercial
(i.e. revenue-generating) real time broadcasting (terrestrial, satellite, cable and/or
any other media), broadcasting/streaming
via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or
audio-on-demand applications. An independent license for such use is required.
For details, please visit
http://www.mp3licensing.com.
WMA file playback
You can play back WMA files recorded on CDROM/CD-R/CD-RW (ISO9660 Level 1/Level 2
standard recordings).
NTSC compatibility
This unit is NTSC system compatible. When
connecting other components to this unit, be
sure components are compatible with the
same video system otherwise images will not
be correctly reproduced.
En
7
Section
02
Before You Start
Dolby Digital/DTS compatibility
When using this unit with a Pioneer multichannel processor, you can enjoy the atmosphere and excitement provided by DVD movie
and music software featuring 5.1 channel recordings.
! Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
! “DTS” and “DTS Digital Out” are registered
trademarks of DTS, Inc.
Multi-angle
You can switch between multiple viewing angles of a scene recorded on a DVD as desired.
Note
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright
protection technology must be authorized by
Macrovision Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is
prohibited.
About WMA
iPod® compatibility
When you use this unit with a Pioneer iPod
adapter (CD-IB100B) (sold separately), you can
control an iPod with Dock Connector.
! iPod is a trademark of Apple Computer,
Inc., registered in the U.S. and other countries.
Multi-aspect
Switching between wide screen, letterbox and
panscan display is possible.
Multi-audio
You can switch between multiple audio systems recorded on a DVD as desired.
Multi-subtitle
You can switch between multiple subtitle languages recorded on a DVD as desired.
8
En
The Windows Media™ logo printed on the box
indicates that this unit can play back WMA
data.
WMA is short for Windows Media Audio and
refers to an audio compression technology
that is developed by Microsoft Corporation.
WMA data can be encoded by using Windows
Media Player version 7 or later.
Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
Notes
! This unit may not operate correctly depending
on the application used to encode WMA files.
Section
Before You Start
result in LCD screen malfunction due to
the resulting high temperatures.
! When using a cellular phone, keep the antenna of the cellular phone away from the
display to prevent disruption of the video by
the appearance of spots, colored stripes,
etc.
About the SAT RADIO
READY mark
Before You Start
! Depending on the version of Windows Media
Player used to encode WMA files, album
names and other text information may not be
correctly displayed.
02
For viewing LCD comfortably
The SAT RADIO READY mark printed on the
front panel indicates that the Satellite Radio
Tuner for Pioneer (i.e., XM tuner and Sirius satellite tuner which are sold separately) can be
controlled by this unit. Please inquire to your
dealer or nearest authorized Pioneer service
station regarding the satellite radio tuner that
can be connected to this unit. For satellite
radio tuner operation, please refer to the satellite radio tuner owner’s manual.
Notes
! The system will use direct satellite-to-receiver
broadcasting technology to provide listeners
in their cars and at home with crystal-clear
sound seamlessly from coast to coast. Satellite radio will create and package over 100
channels of digital-quality music, news,
sports, talk and children’s programming.
! “SAT Radio”, the SAT Radio logo and all related marks are trademarks of Sirius Satellite
Radio inc., and XM Satellite Radio Inc.
To protect the LCD screen
! Do not allow direct sunlight to fall on the
display when this unit is not being used.
Extended exposure to direct sunlight can
Due to its construction, the view angle of the
LCD screen is limited. The viewing angle (vertical and horizontal) can be increased, however,
by using BRIGHT to adjust the black density of
the video. When using for the first time, adjust
the black density in accordance with the viewing angle (vertical and horizontal) to adjust for
clear viewing. DIMMER can also be used to
adjust the brightness of the LCD screen itself
to suit your personal preference.
What the marks on DVDs
indicate
The marks below may be found on DVD disc
labels and packages. They indicate the type of
images and audio recorded on the disc, and
the functions you can use.
Mark
Meaning
Indicates the number of audio systems.
2
2
Indicates the number of subtitle languages.
3
Indicates the number of viewing angles.
16 : 9 LB
1
ALL
Indicates the picture size (aspect ratio:
screen width-to-height ratio) type.
Indicates the number of the region
where playback is possible.
En
9
Section
02
Before You Start
When an operation is prohibited
When you are watching a DVD and attempt to
perform an operation, it may not be performed
because of the programming on the disc.
When this happens, the icon appears on
the screen.
! The icon may not appear with certain
discs.
Protecting your unit from
theft
The front panel can be detached to deter theft.
! If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound.
! You can turn off the warning tone. See
Switching the warning tone on page 39.
Important
! Handle gently when removing or attaching
the front panel.
! Avoid subjecting the front panel to excessive
shocks.
! Keep the front panel out of direct sunlight and
high temperatures.
! If removed, replace the front panel on the unit
before starting up your vehicle.
Release button
Attaching the front panel
% Replace the front panel by holding it
upright to the unit and clipping it securely
into the mounting hook.
Resetting the microprocessor
Pressing RESET lets you reset the microprocessor to its initial settings.
The microprocessor must be reset under the
following conditions:
! Prior to using this unit for the first time
after installation
! If the unit fails to operate properly
! When strange or incorrect messages appear on the display
1
Turn the ignition switch OFF.
2 Press RESET with a pen tip or other
pointed instrument.
Removing the front panel
% Push the release button downward and
release the front panel.
Take care not to grip it too tightly or to drop
the front panel and protect it from contact
with water or other fluids to prevent permanent damage.
10
En
RESET button
Section
Before You Start
02
Before You Start
Note
After completing connections or when you want
to erase all memorized settings or return the unit
to its initial (factory) settings, switch your engine
ON or set the ignition switch to ACC ON before
pressing RESET.
En
11
Section
03
Operating this unit
3
12
45
6
7
8
l
9
k j
i
h gf e dcba
What’s What
Head unit
1 INFO button
Press to turn the information bar on/off.
2 PGM button
Press to operate the preprogrammed functions for each source. (Refer to Using the
PGM button on page 44.)
12
6 ENTERTAINMENT (ENT) button
Press to switch between the background
displays.
7 WIDE button
Press to select a desired mode for enlarging
a 4:3 picture to a 16:9 one.
8 V.ADJ button
Press and hold to display the picture adjustment menu.
3 Ambient light sensor
Senses ambient light. This system automatically adjusts the brightness of the display to
compensate for ambient light.
9 RESET button
Press to return to the factory settings (initial
settings).
4 FLIP DOWN button
Press to turn the LCD panel horizontal temporarily from upright position.
a a/b/c/d buttons
Press to do manual seek tuning, fast forward, reverse and track search controls.
5 OPEN/CLOSE button
Press to open or close the LCD panel.
b A.MENU button
Press to display MENU.
En
Section
Operating this unit
d BAND/ESC button
Press to select among three FM bands and
one AM band and to cancel the control
mode of functions.
e EQ button
Press to select various equalizer curves.
f BOOST button
Press to boost the subwoofer level.
When the separately sold multi-channel processor is connected to this unit and the subwoofer is set to ON, press to display the
speaker level menu. When it is OFF, press to
display the speaker setting menu.
g Release button
Press downward to detach the front panel.
h ANGLE (+/–) button
Press to change the LCD panel angle.
i SOURCE button
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
j EJECT button
Press to eject a disc from this unit.
k VOLUME
Press to increase or decrease the volume.
l Disc loading slot
Insert a disc to play.
Optional remote control
The remote control CD-R55 is sold separately.
For details concerning operations, see the remote control manual.
Basic Operations
Power ON/OFF
Turning the unit on
% Press SOURCE to turn the unit on.
Turning the unit off
% Press SOURCE and hold until the unit
turns off.
# When using the touch panel keys, touch the
source icon and then touch OFF.
When the source icon is not displayed, you can
display it by touching the screen.
Operating this unit
c BOOKMARK (BM) button
Press to bookmark a scene that you want to
resume playback.
03
Selecting a source
You can select a source you want to listen to.
To switch to the DVD player, load a disc in the
unit to switch to DVD.
% When using the touch panel keys,
touch the source icon and then touch the
desired source name.
The source names are displayed and selectable ones are highlighted.
! DVD – Built-in DVD player
! S-DVD – DVD player/multi-DVD player
! M-CD – Multi-CD player
! TUNER – Tuner
! TV – Television
! iPod – iPod
! EXT-1 – External unit 1
! EXT-2 – External unit 2
! AUX – AUX
! AV – AV input
! XM – XM tuner
! SIRIUS – SIRIUS tuner
! OFF – Turn the unit off
# When the source icon is not displayed, you
can display it by touching the screen.
# To return to the playback display, touch ESC.
En
13
Section
03
Operating this unit
% When using the buttons, press SOURCE
to select a source.
Press SOURCE repeatedly to switch between
the following sources:
XM (XM tuner)—SIRIUS (SIRIUS tuner)—
TUNER (tuner)—TV (television)—AV (AV)—
DVD (built-in DVD player)—S-DVD (DVD
player/multi-DVD player)—M-CD (multi-CD
player)—iPod (iPod)—EXT-1 (external unit 1)
—EXT-2 (external unit 2)—AUX (AUX)
Touch panel key basic operation
Activating the touch panel keys
1
Notes
! In the following cases, the sound source will
not change:
— When there is no unit corresponding to the
selected source connected to this unit.
— When there is no disc or magazine in the
player.
— When the AUX (auxiliary input) is set to off
(refer to page 39).
— When the AV (AV input) is not set to
VIDEO (refer to page 41).
! External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two external units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
! When this unit’s blue/white lead is connected
to the vehicle’s auto-antenna relay control
terminal, the vehicle’s antenna extends when
this unit’s source is turned on. To retract the
antenna, turn the source off.
1 Touch panel keys
Touch to do various operations.
1 Touch the screen to activate the touch
panel keys corresponding to each source.
The touch panel keys appear on the display.
# To go to the next group of touch panel keys,
touch d.
2
Touch ESC to hide the touch panel keys.
Note
If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.
Operating the menu
1
2
3
4 5
Adjusting the volume
% Use VOLUME to adjust the sound level.
Press VOLUME up/+ or down/– to increase or
decrease the source volume.
14
En
1 FUNCTION key
Touch to select functions for each source.
2 AUDIO key
Touch to select various sound quality controls.
3 SETUP key
Section
Operating this unit
1 Press A.MENU button to display MENU.
MENU appears on the display.
! When the ignition switch is turned OFF
after the LCD panel has been closed, turning the ignition switch ON again (or turning
it to ACC) will not open the LCD panel. In
this case, press OPEN/CLOSE to open the
LCD panel.
! When closing the LCD panel, check to
make sure that it has closed completely. If
the LCD panel has stopped halfway, leaving
it like this could result in damage.
2 Touch the desired key to display the
function names you want to operate.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
3 Touch ESC to return to the display of
each source.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Operating this unit
Touch to select various setup functions.
4 BACK key
Touch to return to the previous display.
5 ESC key
Touch to cancel the control mode of functions.
03
CAUTION
Keep hands and fingers clear of the unit when
opening, closing, or adjusting the LCD panel. Be
especially cautious of children’s hands and fingers.
% Press OPEN/CLOSE to open the LCD
panel.
# To close the LCD panel, press OPEN/CLOSE
again.
Adjusting the LCD panel angle
Important
Opening and closing the LCD panel
The LCD panel will be opened or closed automatically with the turning of the ignition
switch on or off. You can turn off the automatic
close/open function. (Refer to page 42.)
! Do not close the LCD panel with hands by
force. That cause malfunction.
! The automatic close/open function will operate the display as follows.
— When the ignition switch is turned OFF
while the LCD panel is opened, the LCD
panel will close after six seconds.
— When the ignition switch is turned ON
again (or turned to ACC), the LCD panel
will be opened automatically.
— Removing or attaching the front panel
will automatically close or open the LCD
panel. (Refer to page 10.)
! If you can hear the LCD panel knocking
against your vehicle’s console or dashboard,
press ANGLE (–) to move the LCD panel a little forward.
! When adjusting the LCD panel angle, be sure
to press ANGLE (+/–). Forcibly adjusting the
LCD panel by hand may damage it.
En
15
Section
03
Operating this unit
% Press ANGLE (+/–) to adjust the LCD
panel to an easily viewable angle.
The LCD panel angle continues changing as
long as you press ANGLE (+/–) and hold.
FULL (full)
A 4:3 picture is enlarged in the horizontal direction only, giving you a 4:3 TV picture (normal picture) without any omissions.
JUST (just)
The picture is enlarged slightly at the center and
the amount of enlargement increases horizontally
to the ends, enabling you to enjoy a 4:3 picture
without sensing any disparity even on a wide
screen.
# The adjusted LCD panel angle will be memorized and automatically returned to the next time
the LCD panel is opened.
Turning the LCD panel horizontal
When the LCD panel is upright and it hinders
the operation of the air conditioner, the panel
can be turned horizontal temporarily.
% Press FLIP DOWN to turn the LCD panel
horizontal.
# To return to original position, press
FLIP DOWN again.
# The LCD panel returns to the original position
automatically with beeping sound 10 seconds
after operation.
Changing the wide screen mode
You can select a desired mode for enlarging a
4:3 picture to a 16:9 one.
% Press WIDE to select the desired setting.
Press WIDE repeatedly to switch between the
following settings:
FULL (full)—JUST (just)—CINEMA (cinema)—
ZOOM (zoom)—NORMAL (normal)
16
En
CINEMA (cinema)
The picture is enlarged by the same proportion as
FULL or ZOOM in the horizontal direction and by
an intermediate proportion between FULL and
ZOOM in the vertical direction; ideal for a cinema-sized picture (wide screen picture) where captions lie outside.
ZOOM (zoom)
A 4:3 picture is enlarged in the same proportion
both vertically and horizontally; ideal for a cinema-sized picture (wide screen picture).
NORMAL (normal)
A 4:3 picture is displayed as it is, giving you no
sense of disparity since its proportions are the
same as that of the normal picture.
Notes
! Different settings can be memorized for each
video source.
! When video is viewed in a wide screen mode
that does not match its original aspect ratio, it
may appear different.
! Remember that using the wide mode feature
of this system for commercial or public viewing purposes may constitute an infringement
on the author’s rights protected by the Copyright Law.
! Video will appear grainy when viewed in
CINEMA or ZOOM mode.
Section
Operating this unit
Changing the picture adjustment
1 Press V.ADJ and hold to display
PICTURE ADJUST.
Press V.ADJ until PICTURE ADJUST appears
in the display.
2 Touch any of the following touch panel
keys to select the function to be adjusted.
The adjustment function names are displayed
and adjustable ones are highlighted.
BRIGHT – Adjust the black intensity
CONTRAST – Adjust the contrast
COLOR – Adjust the color saturation
HUE – Adjust the tone of color (red is emphasized or green is emphasized)
! DIMMER – Adjust the brightness of display
! BACK-CAMERA – Switch to the picture adjustment display for the rear view camera
# You can adjust the picture adjustment for rear
view camera only when B-CAM is turned on.
(Refer to Setting for rear view camera (back up
camera) on page 41.)
# With some rear view cameras, picture adjustment may not be possible.
is displayed as the level is increased or decreased.
4
Adjusting the dimmer
The adjustment of DIMMER is stored separately for each ambient light; daytime, evening
and nighttime. The brightness of LCD screen
will be adjusted to optimum level automatically in accordance with the ambient light
based on the setting values.
1 Press V.ADJ and hold to display
PICTURE ADJUST.
Press V.ADJ until PICTURE ADJUST appears
in the display.
2 Touch DIMMER.
The ambient light level used as the standard
for adjusting DIMMER appears above the level
bar.
! Red sun
– Adjust the brightness for
bright ambient light (daytime)
! White sun
– Adjust the brightness for intermediate brightness (evening)
! Blue moon – Adjust the brightness for
dark ambient light (nighttime)
!
!
!
!
3 Touch c or d to adjust the selected
item.
Each time you touch c or d it increases or decreases the level of selected item. +24 to –24
Touch ESC to hide the touch panel keys.
Operating this unit
You can adjust BRIGHT (brightness),
CONTRAST (contrast), COLOR (color) and
HUE (hue) for each source and rear view camera.
! The adjustments of BRIGHT and
CONTRAST are stored separately for light
ambient (daytime) and dark ambient (nighttime). A sun
or moon is displayed to
the left of BRIGHT and CONTRAST, respectively, as the ambient light sensor determines brightness or darkness.
! You cannot adjust COLOR or HUE for the
audio source.
03
3 Touch c or d to adjust the brightness.
Each time you touch c or d moves the key towards the left or the right.
The level indicates the brightness of the
screen being adjusted. The farther the key
moves to the right, the brighter the screen.
4
Touch ESC to hide the touch panel keys.
Note
The icons indicating the current ambient brightness used for adjusting BRIGHT and CONTRAST
may differ from DIMMER slightly.
En
17
Section
Operating this unit
03
Tuner
Basic Operations
1
2
3
4
5 To perform manual tuning, briefly
touch c or d.
The frequencies move up or down step by
step.
# You can also perform manual tuning by pressing c or d button.
6 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
76
5
1
2
3
4
5
6
Source icon
Band indicator
Preset number indicator
Frequency indicator
Preset list display
LOCAL indicator
Shows when local seek tuning is on.
7 STEREO indicator
Shows when the selected frequency is being
broadcast in stereo.
Note
If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.
1 Touch the source icon and then touch
TUNER to select the tuner.
Storing and recalling broadcast
frequencies
2 Touch the screen to display the touch
panel keys.
You can easily store up to six broadcast frequencies for later recall.
! Up to 18 FM stations, six for each of the
three FM bands, and six AM stations can
be stored in memory.
3 Touch BAND to select a band.
Touch BAND until the desired band (FM1,
FM2, FM3 for FM or AM) is displayed.
4 To select a preset channel, touch a preset channel on the list.
The preset channel you selected is tuned in.
# When the list of channels is not displayed,
touch LIST.
18
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip stations. Seek tuning starts as soon as you release
the key.
# You can also perform seek tuning by pressing
and holding c or d button.
En
% When you find a frequency that you
want to store in memory keep touching
one of preset tuning keys P1 to P6 until the
preset number stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
Section
Operating this unit
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P1 to P6 are not displayed, you can display them by touching LIST.
# You can also use a and b buttons to recall
radio station frequencies assigned to preset tuning keys P1 to P6.
You can also use a and b buttons to recall radio
station frequencies assigned to preset tuning
keys P1 to P6.
Introduction of advanced tuner
operation
1 Press A.MENU button to display MENU.
MENU appears on the display.
2 Touch FUNCTION to display the function names.
The function names are displayed and operable ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the frequency display, touch ESC.
# If you do not operate the function within about
30 seconds, the display is automatically returned
to the frequency display.
% Touch BSM on the function menu to
turn BSM on.
BSM begins to flash. While BSM is flashing
the six strongest broadcast frequencies will be
stored under preset tuning keys P1 to P6 in
order of their signal strength. When finished,
BSM stops flashing.
# To cancel the storage process, touch BSM
again.
Tuning in strong signals
Operating this unit
The next time you touch the same preset tuning key the radio station frequency is recalled
from memory.
03
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1
Touch LOCAL on the function menu.
2
Touch a to turn local seek tuning on.
# To turn local seek tuning off, touch b.
3 Touch c or d to set the sensitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: 1—2—3—4
AM: 1—2
The 4 setting allows reception of only the
strongest stations, while lower settings let you
receive progressively weaker stations.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under preset tuning keys P1 to P6
and once stored there you can tune in to those
frequencies with the touch of a key.
! Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using P1 to P6.
En
19
Section
03
Operating this unit
Built-in DVD player
1 Insert a disc into the disc loading slot.
Playback will automatically start.
Basic Operations
The built-in DVD player can play back DVD
video, Video CD, audio CD (CD-DA) and compressed audio (WMA/MP3) recorded on CDROM. (Refer to page 75 for files that can be
played back.)
Read the precautions with discs and player on
Handling guideline of discs and player on page
74.
12 3
4
5
! When the automatic playback function is
on, this unit will cancel the DVD menu and
automatically start playback from the first
chapter of the first title. Refer to Automatic
playback of DVDs on page 25.
# Be sure to turn up the label side of a disc.
# With some DVD discs, a menu may be displayed. (Refer to Operating the DVD menu on the
next page.)
# With a Video CD featuring the PBC (playback
control) function, a menu is displayed.
# After a disc has been inserted, use touch
panel keys to select the DVD player.
# To eject a disc, press EJECT.
2 Touch the screen to display the touch
panel keys.
6
7
1 Source icon
2 Media indicator
Shows the type of disc currently playing.
3 Title/Folder number indicator
DVD video: shows the title currently playing.
Compressed audio: shows the folder currently
playing.
4 Chapter/track number indicator
DVD video: shows the chapter currently playing.
Video CD, CD and Compressed audio: shows
the track currently playing.
5 Play time indicator
6 Variable message area
DVD video: shows the subtitle language and
audio language.
CD and compressed audio: shows the text information of currently playing disc.
7 Viewing angle indicator
Shows which viewing angle has been selected.
20
En
3 When playing Video CD, touch 10key
and then touch 0 to 9 to select the desired
menu item.
Playback starts from the selected menu item.
# Depending on the discs, the menu may be
two or more pages long. In such case, touch o
or p to display the next or previous menu.
# You can display the menu by pressing
RETURN during PBC playback. For details, refer
to the instructions provided with the disc.
4 When playing compressed audio, touch
a track title on the list to select a track.
The selected track will begin to play.
# When the list of titles is not displayed, touch
LIST.
# To go to the next group of list titles, touch .
# To return to the previous group of list titles,
touch .
# To select a folder, touch to show the folder
one level higher and touch a folder name on the
list.
Section
Operating this unit
!
5 To skip back or forward to another
chapter/track, briefly touch o or p.
!
# When playing DVD video or Video CD, fast forward/fast reverse may not be possible at certain
locations on some discs. If this happens, normal
playback automatically resumes.
# When playing compressed audio, there is no
sound on fast forward or reverse.
Notes
! If you do not use the touch panel keys within
30 seconds, they will be hidden automatically.
! The DVD player plays one, standard, 12-cm or
8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
! Do not insert anything other than a disc into
the disc loading slot. Discs which can be
played back are listed on Playable discs on
page 5.
! If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting it again.
! If an error message such as ERROR-02 is displayed, refer to Error messages on page 72.
! If bookmark function is on, DVD playback resumes from the selected point. For more de-
!
!
!
Operating the DVD menu
Some DVDs allow you to select from the disc
contents using a menu.
! This function is available for DVD.
! You can display the menu by touching
MENU or TOP.M while a disc is playing.
Touching either of these keys again lets you
start playback from the location selected
from the menu. For details, refer to the instructions provided with the disc.
1 Touch to display touch panel keys
to operate the DVD menu.
6 To perform fast forward or reverse,
keep touching o or p.
When DVD video or Video CD is playing, if you
keep touching o or p for five seconds,
the icon m or n is highlighted. When this
happens, fast reverse/fast forward continues
even if you release o or p. To resume
playback at a desired point, touch f.
tails, refer to Resume playback (Bookmark) on
page 28.
When playing discs with compressed audio
and audio data (CD-DA) such as CD-EXTRA
and MIXED-MODE CDs, both types can be
played only by switching mode between compressed audio and CD-DA by touching
MEDIA or pressing BAND/ESC. This function
can be operated only when the disc is playing.
If you have switched between compressed
audio and CD-DA, playback starts at the first
track on the disc.
There is sometimes a delay between starting
up disc playback and the sound being issued.
When being read, FORMAT READ is displayed.
When playing back files recorded as VBR
(variable bit rate) files, the play time will not be
correctly displayed if fast forward or reverse
operations are used.
When playing a compressed audio disc containing more than 192 tracks, READY appears on the information bar for the track
titles of 193rd and later.
Operating this unit
# To return to folder 001 (ROOT), press and hold
BAND/ESC. However, if folder 001 (ROOT) contains no files, playback commences with folder
002.
# You can also select a folder by pressing a or
b button.
03
# When the touch panel keys are not displayed,
you can display them by touching the screen.
2 Touch a, b, c or d to select the desired
menu item.
En
21
Section
Operating this unit
03
3 Touch ENTER.
Playback starts from the selected menu item.
# You cannot operate the DVD menu from a/b/
c/d buttons on the head unit.
# The way to display the menu differs depending
on the disc.
Operating the DVD menu with 10 key
Some DVDs allow you to select from the disc
contents using 10key.
1 Touch d until 10key appears in the display.
2
Touch 10key.
3 Touch 0 to 9 corresponding to a menu
number and then touch ENTER to start
playback.
! To select 3, touch 3.
! To select 10, touch 1 and 0 in that order.
! To select 23, touch 2 and 3 in that order.
Skipping back or forward to
another title
! This function is available for DVD.
% To skip back or forward to another title,
touch a or b.
Touching a skips to the start of the next title.
Touching b skips to the start of the previous
title.
Title numbers are displayed for eight seconds.
Searching for a desired scene,
starting playback from a
specified time
You can use the search function to search for
a desired scene by specifying a title, chapter,
track and the time search function to specify
the time on a disc at which play starts.
22
En
! This function is available for DVD and
Video CD.
! Chapter search and time search are not
possible when disc playback has been
stopped.
! During playback of Video CDs featuring
PBC (playback control), this function cannot be operated.
1
Touch SEARCH.
2 Touch TITLE (title), CHAP. (chapter),
TRACK (track) or TIME (time).
3 Touch 0 to 9 to input the desired number.
For titles, chapters and tracks
! To select 3, touch 3.
! To select 10, touch 1 and 0 in that order.
! To select 23, touch 2 and 3 in that order.
For time (time search)
! To select 21 minutes 43 seconds, touch 2, 1,
4 and 3 in that order.
! To select 1 hour 11 minutes, convert the
time into 71 minutes 00 seconds and touch
7, 1, 0 and 0 in that order.
# To cancel the inputted numbers, touch C.
4 While the inputted number is displayed, touch ENTER.
This starts playback from the selected scene.
Notes
! With DVD discs featuring a menu, you can
also touch MENU or TOP.M and then make
selections from the displayed menu.
! With some discs, the icon may be displayed, indicating that titles, chapters and
time cannot be specified.
Specifying title
You can use the direct search function to
search for a desired scene by specifying a title.
Section
Operating this unit
1 Touch d until 10key appears in the display.
Touch 10key.
3 Touch 0 to 9 corresponding to a desired
title number when the disc is stopped.
Title number is displayed for eight seconds
and playback starts from the selected title.
! To select 3, touch 3.
! To select 10, touch 1 and 0 in that order.
! To select 23, touch 2 and 3 in that order.
Changing audio language
during playback (Multi-audio)
DVDs can provide audio playback with different languages and different systems (Dolby Digital, DTS etc.). With DVDs featuring multiaudio recordings, you can switch between languages/audio systems during playback.
! This function is available for DVD.
1 Touch d until AUDIO appears in the
display.
2 Touch AUDIO during playback.
Each time you touch AUDIO it switches between audio systems.
Notes
! The number in the 2
mark on a DVD’s
package indicates the number of recorded
languages/audio systems.
! With some DVDs, switching between languages/audio systems may only be possible
using a menu display.
! You can also switch between languages/audio
systems using DVD SETUP. For details, refer
to Setting the audio language on page 35.
! Only digital output of DTS audio is possible. If
this unit’s optical digital outputs are not con-
nected, DTS audio will not be output, so select
an audio setting other than DTS.
! Display indications such as Dolby D and
5.1ch indicate the audio system recorded on
the DVD. Depending on the setting, playback
may not be with the same audio system as
that indicated.
! Touching AUDIO during fast forward/fast reverse, pause or slow motion playback returns
you to normal playback.
Operating this unit
2
03
Changing the subtitle language
during playback (Multi-subtitle)
With DVDs featuring multi-subtitle recordings,
you can switch between subtitle languages
during playback.
! This function is available for DVD.
1 Touch d until SUB.T appears in the display.
2 Touch SUB.T during playback.
Each time you touch SUB.T it switches between subtitle languages.
Notes
! The number in the 2 mark on a DVD’s package indicates the number of recorded subtitle
languages.
! With some DVDs, switching between subtitle
languages may only be possible using a menu
display.
! You can also switch between subtitle languages using DVD SETUP. For details, refer to
Setting the subtitle language on page 35.
! Touching SUB.T during fast forward/fast reverse, pause or slow motion playback returns
you to normal playback.
En
23
Section
03
Operating this unit
Changing the viewing angle
during playback (Multi-angle)
With DVDs featuring multi-angle (scenes shot
from multiple angles) recordings, you can
switch among viewing angles during playback.
! This function is available for DVD.
! During playback of a scene shot from multiple angles, the angle icon
is displayed. Turn angle icon display on or off
using DVD SETUP. For details, refer to Setting the angle icon display on page 36.
1 Touch d until ANGLE appears in the
display.
2 Touch ANGLE during playback of a
scene shot from multiple angles.
Each time you touch ANGLE it switches between angles.
Notes
! The 3 mark on a DVD’s package indicates it
features multi-angle scenes. The number in
the 3 mark indicates the number of angles
from which scenes were shot.
! Touching ANGLE during fast forward/fast reverse, pause or slow motion playback returns
you to normal playback.
Stopping playback
% Touch g.
# When you stop disc playback by touching g,
that location on the disc is memorized, enabling
playback from that point when you play the disc
again.
# To play back the disc again, touch f.
Pausing disc playback
Pause lets you temporarily stop disc playback.
24
En
% Touch f during playback.
The icon e is displayed and playback is
paused, letting you view a still image.
# To resume playback at the same point that you
turned pause on, touch f again.
Note
Depending on the disc and the playback location
on the disc, the icon may be displayed, indicating that still playback is not possible.
Frame-by-frame playback
This lets you move ahead one frame at a time
during playback.
! This function is available for DVD and
Video CD.
% Touch r during playback.
Each time you touch r, you move ahead one
frame.
# To return to normal playback, touch f.
Notes
! Depending on the disc and the playback location on the disc, the icon may be displayed,
indicating that frame-by-frame playback is not
possible.
! With some discs, images may be unclear during frame-by-frame playback.
Section
Operating this unit
Slow motion playback
1 Keep touching r until is displayed
during playback.
The icon is displayed, forward slow motion playback begins.
# To return to normal playback, touch f.
2 Touch q or r to adjust playback
speed during slow motion playback.
Each time you touch q or r it changes the
speed in four steps in the following order:
1/16—1/8—1/4—1/2
Notes
! There is no sound during slow motion playback.
! Depending on the disc and the playback location on the disc, the icon may be displayed,
indicating that slow motion playback is not
possible.
! With some discs, images may be unclear during slow motion playback.
! Reverse slow motion playback is not possible.
Note
If a specified scene has not been preprogrammed
in DVD disc, this function is not possible.
Automatic playback of DVDs
When a DVD disc with DVD menu is inserted,
this unit will cancel the DVD menu automatically and start playback from the first chapter
of the first title.
! This function is available for DVD.
! Some DVDs may not operate properly. If
this function is not fully operated, turn this
function off and start playback.
Operating this unit
This lets you slow down playback speed.
! This function is available for DVD and
Video CD.
03
1 Touch d until A.PLAY appears in the
display.
2 Touch A.PLAY to turn automatic playback on.
# To turn automatic playback off, touch A.PLAY
again.
# When the automatic playback is on, you cannot operate repeating play of DVD disc (refer to
Repeating play on page 27).
PBC playback
Return to the specified scene
You can return to the specified scene where
the DVD you are currently playing has been
preprogrammed to return.
! This function is available for DVD.
1 Touch d until RETURN appears in the
display.
2 Touch RETURN to return to the specified scene.
During playback of Video CDs featuring PBC
(Playback Control), PBC ON is displayed. You
can operate PBC menu with 10key.
! This function is available for Video CD.
1 Touch d until 10key appears in the display and then touch 10key.
2 Touch 0 to 9 corresponding to a menu
number and then touch ENTER to start
playback.
! To select 3, touch 3.
! To select 10, touch 1 and 0 in that order.
! To select 23, touch 2 and 3 in that order.
En
25
Section
03
Operating this unit
! PBC playback of Video-CD cannot be cancelled.
! During playback of Video CDs featuring PBC
(Playback Control), PBC ON, search and time
search functions cannot be used nor can you
select the range for repeat play.
! If specific information has not been recorded
on a CD TEXT disc, NO XXXX will be displayed (e.g., NO T.ARTIST NAME).
! When playing back WMA files, album title and
comment are not displayed.
! When a list of folders/files is displayed by the
touch of LIST, Current (currently playing
folder) is displayed instead of Folder.
! When playing back MP3 files recorded as VBR
(variable bit rate) files, the bit rate value is not
displayed even after switching to bit rate.
(VBR will be displayed.)
! If specific information has not been recorded
on a compressed audio disc, NO XXXX will
be displayed (e.g., NO ARTIST NAME).
Text information
Scrolling text information in the display
Text information recorded on CD TEXT and
compressed audio disc can be displayed. Text
information is displayed on variable message
area.
This unit can display the first 19 letters. When
the recorded information is longer than 19 letters, you can scroll the text to the left so that
the rest of the title can be seen.
Displaying text information
% Keep touching DISP until the title begins to scroll to the left.
The rest of the title will appear in the display.
# Depending on the discs, the menu may be
two or more pages long. In such case, touch o
or p to display the next or previous menu.
# You can display the menu by touching
RETURN during PBC playback. For details, refer
to the instructions provided with the disc.
Notes
% Touch DISP.
Touch DISP repeatedly to switch between the
following settings:
For CD TEXT discs
D.Title (disc title)—D.Artist (disc artist name)
—T.Title (track title)—T.Artist (track artist
name)
For compressed audio discs
Folder (folder name)—File (file name)—
T.Title (track title)—Artist (artist name)—
Album (album title)—Comment (comment)—
Bit Rate (bit rate)
Notes
! Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artist’s name and playback time
and are called CD TEXT discs.
26
En
Displaying information on
compressed audio
Information recorded on a compressed audio
disc can be displayed.
% Touch
to display information on
the compressed audio file you are currently
playing.
! ALBUM (album title)
! TRACK (track title)
! FOLDER (folder name)
! FILE (file name)
! ARTIST (artist name)
! GENRE (genre)
! YEAR (year)
# When playing back WMA files, lists of album
title, genre and year appear in blank.
Section
Operating this unit
Introduction of advanced
operations
For DVD, play range can be selected from
TITLE (title repeat) and CHPTR (chapter repeat).
For Video CD and CD, play range can be selected from DISC (disc repeat) and TRACK
(track repeat).
For compressed audio, play range can be selected from DISC (disc repeat), FOLDER (folder
repeat) and TRACK (track repeat).
% Touch REPEAT on the function menu to
select the repeat range.
!
!
!
!
!
1
1 Function display
Shows the function names.
1 Press A.MENU button to display MENU.
MENU appears on the display.
2 Touch FUNCTION to display the function names.
The function names are displayed and operable ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the playback display, touch ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the playback display.
Repeating play
Repeat play plays the same play range repeatedly. Play range varies depending on the
media.
Operating this unit
# If specific information has not been recorded
on a compressed audio file, the list appears in
blank.
# Depending on the version of ID3 tag or
Windows Media Player, the information may not
be displayed correctly.
03
TITLE – Repeat just the current title
CHPTR – Repeat just the current chapter
TRACK – Repeat just the current track
FOLDER – Repeat the current folder
DISC – Play through the current disc
Notes
! If you perform chapter search or fast forward/
reverse, the repeat play range changes to
DISC.
! If you select another folder during repeat play,
the repeat play range changes to DISC.
! During compressed audio playback, if you perform track search or fast forward/reverse during TRACK, the repeat play range changes to
FOLDER.
! When FOLDER is selected, it is not possible to
play back a subfolder of that folder.
! When playing discs with compressed audio
and audio data (CD-DA), repeat play performs
within the currently playing data type even if
DISC is selected.
Playing tracks in random order
Random play plays tracks in a random order
within the selected repeat range.
! This function is available for CD and compressed audio disc.
En
27
Section
03
Operating this unit
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Touch RANDOM on the function menu
to turn random play on.
Tracks will play in a random order within the
previously selected repeat range.
# To turn random play off, touch RANDOM
again.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
When playing the compressed audio disc, the
first 10 seconds of each track of the current
folder (or the first track of each folder) is
played.
! This function is available for CD and compressed audio disc.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Touch SCAN on the function menu to
turn scan play on.
The first 10 seconds of each track is played.
3 When you find the desired track (or
folder) touch SCAN again.
Note
After track or folder scanning is finished, normal
playback of the tracks will begin again.
Selecting audio output
You can switch between stereo and monaural
audio output.
! This function is available for DVD and
Video CD.
! This function is not possible when disc
playback has been stopped.
28
En
1
Press A.MENU button to display MENU.
2 Touch FUNCTION to display the function names.
3 Touch L/R SELECT to select the audio
output.
! L+R – left and right
! LEFT – left
! RIGHT – right
Note
Depending on the disc and the playback location
on the disc, the function may not be selectable,
indicating that operating this function is not possible.
Resume playback (Bookmark)
The Bookmark function lets you resume playback from a selected scene the next time the
disc is loaded.
! This function is available for DVD.
% During playback, press
BOOKMARK (BM) button at the point you
want to resume playback next time.
The selected scene will be bookmarked so that
playback resumes from that point next time.
You can bookmark up to five discs. After that,
the oldest bookmark is replaced by the new
one.
# To clear the bookmark on a disc, press and
hold BOOKMARK (BM) button during playback.
# You can also bookmark a disc by pressing and
holding EJECT at the point you want to bookmark.
Next time you load the disc, playback will resume
from the bookmarked point. Note that you can
only bookmark one disc using this method. To
clear the bookmark on a disc, press EJECT.
Section
Operating this unit
Entering disc titles
1 Play the CD that you want to enter a
title for.
2
Touch T. EDIT on the function menu.
3 Touch ABC to select the desired character type.
Touch ABC repeatedly to switch between the
following character types:
Alphabet (upper case), numbers and symbols
—alphabet (lower case)—European letters,
such as those with accents (e.g., á, à, ä, ç)
# You can select to input numbers and symbols
by touching 123.
4 Touch a or b to select a letter of the alphabet.
Each time you touch a it will display alphabet,
numbers or symbols in ascending order (A B
C ...). Each time you touch b it will display a
letter in descending order.
5 Touch d to move the cursor to the next
character position.
When the desired letter is displayed, touch d
to move the cursor to the next position and
then select the next letter. Touch c to move
backwards in the display.
6 Touch OK to store the entered title in
memory.
7 Touch ESC to return to the playback display.
Operating this unit
You can input CD titles and display the title.
The next time you insert a CD for which you
have entered a title, the title of that CD will be
displayed.
Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
10 characters long.
! This function is available for CD.
! When playing a CD TEXT disc, you cannot
switch to T. EDIT. The disc title will have already been recorded on a CD TEXT disc.
! If no title has been entered for the currently
playing disc, NO DISC TITLE is displayed.
03
Notes
! Titles remain in memory, even after the disc
has been removed from the unit, and are recalled when the disc is reinserted.
! After data for 48 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.
Selecting tracks from the track
title list
Track title list lets you see the list of track titles
on a CD TEXT disc and select one of them to
play back.
! This function is available for CD.
1
Touch T.LIST on the function menu.
2 Touch
or
lists of titles.
to switch between the
3 Touch your favorite track title.
That selection will begin to play.
En
29
Section
03
Operating this unit
Audio Adjustments
Introduction of audio adjustments
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically returned to the source display.
1
1 Audio display
Shows the audio adjustment status.
Important
If the multi-channel processor (DEQ-P8000) is
connected to this unit, the audio function will be
changed to the multi-channel processor’s audio
menu. For details, refer to Introduction of DSP adjustments on page 58.
1 Press A.MENU button to display MENU.
MENU appears on the display.
2 Touch AUDIO to display the audio function names.
The audio function names are displayed and
operable ones are highlighted.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is selected as the equalizer curve, you can switch to
BASS and TREBLE.
# Only when the subwoofer controller setting is
FULL, NON FADING will be displayed instead of
SUB WOOFER. (Refer to Setting the rear output
and subwoofer controller on page 39.)
# When selecting the FM tuner as the source,
you cannot switch to SLA.
30
En
Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening environment in all occupied seats.
1 Touch FAD/BAL on the audio function
menu.
# When the rear output setting is SUB. W, BAL
will be displayed instead of FAD/BAL. Refer to
Setting the rear output and subwoofer controller
on page 39.
2 Touch a or b to adjust front/rear
speaker balance.
Each time you touch a or b it moves the
front/rear speaker balance towards the front or
the rear.
FRONT:15 to REAR:15 is displayed as the
front/rear speaker balance moves from front to
rear.
# FR:00 is the proper setting when only two
speakers are used.
# When the rear output setting is SUB. W, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 39.
3 Touch c or d to adjust left/right speaker balance.
Each time you touch c or d it moves the left/
right speaker balance towards the left or the
right.
LEFT:09 to RIGHT:09 is displayed as the left/
right speaker balance moves from left to right.
Section
Operating this unit
Using the equalizer
Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
Equalizer curve
POWERFUL
Powerful
NATURAL
Natural
VOCAL
Vocal
CUSTOM
Custom
FLAT
Flat
SUPER BASS
Super bass
! CUSTOM is an adjusted equalizer curve
that you create.
! A separate CUSTOM curve can be created
for each source. If you make adjustments,
the equalizer curve settings will be memorized in CUSTOM.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
% Press EQ to select the equalizer.
Press EQ repeatedly to switch between the following equalizers:
POWERFUL—NATURAL—VOCAL—CUSTOM
—FLAT—SUPER BASS
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM.
! You can adjust the center frequency and
the Q factor (curve characteristics) of each
currently selected curve band (LOW/MID/
HIGH).
Level (dB)
Q=2N
Q=2W
Center frequency
Frequency (Hz)
Operating this unit
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
03
1 Touch EQ MENU on the audio function
menu.
2 Touch a or b to select the desired item.
Each time you touch a or b selects the item
in the following order:
BAND (bands)—LEVEL (equalizer level)—
FREQUENCY (center frequency)—Q. FACTOR
(Q factor)
3 Touch c or d to select the equalizer
band to adjust.
Each time you touch c or d selects equalizer
bands in the following order:
LOW (low)—MID (mid)—HIGH (high)
4 Touch b and then touch c or d to adjust the level of the equalizer band.
Each time you touch c or d increases or decreases the level of the equalization band.
+6 to –6 is displayed as the level is increased
or decreased.
5 Touch b and then touch c or d to select the desired frequency.
Touch c or d until the desired frequency appears in the display.
Low: 40Hz—80Hz—100Hz—160Hz
Mid: 200Hz—500Hz—1kHz—2kHz
High: 3.15kHz—8kHz—10kHz—12.5kHz
En
31
Section
03
Operating this unit
6 Touch b and then touch c or d to select the desired Q factor.
Touch c or d until the desired Q factor appears in the display.
2W—1W—1N—2N
Note
If you make adjustments, CUSTOM curve is updated.
Adjusting bass and treble
You can adjust bass and treble settings.
! If EQ-EX function has been selected and
only when EQ-EX is turned on and
CUSTOM is selected as the equalizer
curve, you can adjust bass and treble settings. (Refer to Compensating for equalizer
curves (EQ-EX) on page 34.)
Adjusting bass
You can adjust the cut-off frequency and the
bass level.
1 Touch BASS on the audio function
menu.
2 Touch a or b to adjust the bass level.
Each time you touch a or b increases or decreases the bass level. +6 to –6 is displayed as
the level is increased or decreased.
3 Touch c or d to select the desired frequency.
Touch c or d until the desired frequency appears in the display.
40Hz—63Hz—100Hz—160Hz
Adjusting treble
You can adjust the cut-off frequency and the
treble level.
32
En
1 Touch TREBLE on the audio function
menu.
2 Touch a or b to adjust the treble level.
Each time you touch a or b increases or decreases the treble level. +6 to –6 is displayed
as the level is increased or decreased.
3 Touch c or d to select the desired frequency.
Touch c or d until the desired frequency appears in the display.
2.5kHz—4kHz—6.3kHz—10kHz
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Touch LOUDNESS (LOUD) on the audio
function menu.
2
Touch a to turn loudness on.
# To turn loudness off, touch b.
3 Touch c or d to select a desired level.
Each time you touch c or d selects level in
the following order:
LOW (low)—MID (mid)—HIGH (high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
! When the subwoofer output is on, you can
adjust the cut-off frequency and the output
level of the subwoofer.
1 Touch SUB WOOFER on the audio function menu.
# When the subwoofer controller setting is
FULL, you cannot select SUB WOOFER.
Section
Operating this unit
2
03
Touch c to turn subwoofer output on.
# To turn subwoofer output off, touch d.
4 Touch b and then touch c or d to adjust the output level of the subwoofer.
Each time you touch c or d increases or decreases the level of the subwoofer. +6 to –6 is
displayed as the level is increased or decreased.
5 Touch b and then touch c or d to select cut-off frequency.
Each time you touch c or d selects cut-off frequencies in the following order:
50Hz—80Hz—125Hz
Only frequencies lower than those in the selected range are outputted from the subwoofer.
Boosting the subwoofer level
You can easily boost the subwoofer bass level
by repeatedly pressing BOOST button. If the
subwoofer is set to OFF, pressing BOOST button automatically sets the subwoofer to ON.
You can also select the subwoofer level in the
audio menu. Refer to Using subwoofer output on
the previous page.
Using nonfading output
When the nonfading output setting is on, the
audio signal does not pass through this unit’s
low pass filter (for the subwoofer), but is outputted through the RCA output.
Operating this unit
3 Touch b and then touch c or d to select the phase of subwoofer output.
Touch d to select normal phase and
NORMAL appears in the display. Touch c to
select reverse phase and REVERSE appears in
the display.
Note
1 Touch NON FADING on the audio function menu.
# When the subwoofer controller setting is only
FULL, you can select NON FADING. (Refer to
page 39.)
2
Touch a to turn non fading output on.
# To turn non fading output off, touch b.
3 Touch c or d to adjust the output level
of the non fading.
Each time you touch c or d increases or decreases the level of the non fading. +6 to –6 is
displayed as the level is increased or decreased.
Using the high pass filter
% Press BOOST button to increase the
subwoofer level.
The subwoofer level 0 to +6 is shown in the
display.
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are outputted
from the front or rear speakers.
# To decrease the level, press BOOST button
and hold. The subwoofer level is reset to 0 and
then you can start again.
1 Touch NEXT on the audio function
menu.
2
Touch HPF.
En
33
Section
Operating this unit
03
3
Touch a to turn high pass filter on.
# To turn high pass filter off, touch b.
4 Touch c or d to select cut-off frequency.
Each time you touch c or d selects cut-off frequencies in the following order:
50Hz—80Hz—125Hz
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent radical changes in volume when switching between sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to adjust.
2 Touch NEXT on the audio function
menu.
3
Touch SLA.
4 Press a or b to adjust the source volume.
Each time you press a or b it increases or decreases the source volume.
+4 to –4 is displayed as the source volume is
increased or decreased.
Notes
! The AM tuner volume level can also be adjusted with source level adjustments.
! Video CD, CD and compressed audio are set
to the same source level adjustment volume
automatically.
! DVD and the optional DVD player are set to
the same source level adjustment volume
automatically.
34
En
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
! AUX (auxiliary input) and AV (AV input) are set
to the same source level adjustment volume
automatically.
Compensating for equalizer
curves (EQ-EX)
The EQ-EX function accentuates the effects of
each equalizer curve. Furthermore, you can
adjust bass and treble for each source when
CUSTOM curve is selected.
1 Touch NEXT on the audio function
menu.
2
Touch EQ-EX.
3
Touch a to turn EQ-EX on.
# To turn EQ-EX off, touch b.
Section
Operating this unit
Setting up the DVD player
You can use this menu to change audio, subtitle, parental lock and other DVD settings.
1 Touch SETUP and LANGUAGE and then
touch SUB. T LANG.
Subtitle language menu is displayed and the
currently selected language is highlighted.
# To switch to the second language select
menu, touch NEXT.
# To return to the first language select menu,
touch PREV.
2 Touch the desired language.
A subtitle language is set.
# If you have selected OTHERS, refer to When
you select OTHERS on this page.
1
1 DVD setup menu display
Shows the DVD setup menu names.
1 Touch g.
SETUP will be displayed instead of MENU.
2 Touch SETUP when the disc is stopped.
The DVD setup menu is displayed.
3 Touch any of LANGUAGE or VISUAL to
display the DVD setup function names.
The DVD setup function names in selected
menu are displayed.
# To return to the previous display, touch BACK.
# To return to the playback display, touch ESC.
Operating this unit
Introduction of DVD setup
adjustments
03
Notes
! If the selected language is not recorded on
the disc, the language specified on the disc is
displayed.
! You can also switch the subtitle language by
touching SUB.T during playback. (Refer to
Changing the subtitle language during playback (Multi-subtitle) on page 23.)
! Even if you use SUB.T during playback to
switch the subtitle language, this does not affect the settings here.
When you select OTHERS
When you select OTHERS, a language code
input display is shown. Refer to Language code
chart for DVD on page 78 to input the four-digit
code of the desired language.
Note
If you do not operate the DVD setup function
within about 30 seconds, the display is automatically returned to the playback display.
Setting the subtitle language
You can set a desired subtitle language. If the
selected subtitle language is recorded on the
DVD, subtitles are displayed in that language.
1 Touch 0 to 9 to input the language
code.
# To cancel the inputted numbers, touch C.
2 While the inputted number is displayed, touch ENTER.
Setting the audio language
You can set the preferred audio language.
En
35
Section
03
Operating this unit
1 Touch SETUP and LANGUAGE and then
touch AUDIO LANG.
Audio language menu is displayed and the
currently selected language is highlighted.
# To switch to the second language select
menu, touch NEXT.
# To return to the first language select menu,
touch PREV.
2 Touch the desired language.
The audio language is set.
# If you have selected OTHERS, refer to When
you select OTHERS on the previous page.
Note
If the selected language is not recorded on the
disc, the language specified on the disc is displayed.
Switching the assist subtitle on
or off
If assist subtitles are recorded on a DVD disc,
you can display them by turning the assist
subtitle function on.
You can turn assist subtitles on or off as desired.
Notes
! If the selected language is not recorded on
the disc, the language specified on the disc is
outputted.
! You can also switch the audio language by
touching AUDIO during playback. (Refer to
Changing audio language during playback
(Multi-audio) on page 23.)
! Even if you use AUDIO during playback to
switch the audio language, this does not affect the settings here.
Setting the menu language
You can set the preferred language for displays of menus recorded on a disc.
1 Touch SETUP and LANGUAGE and then
touch MENU LANG.
A menu language menu is displayed and the
currently set language is highlighted.
# To switch to the second language select
menu, touch NEXT.
# To return to the first language select menu,
touch PREV.
2 Touch the desired language.
The menu language is set.
# If you have selected OTHERS, refer to When
you select OTHERS on the previous page.
36
En
1 Touch SETUP and LANGUAGE and then
touch NEXT.
2 Touch A SUB TITL to turn assist subtitles
on.
# To turn the assist subtitle off, touch
A SUB TITL again.
Setting the angle icon display
You can set it up so that the angle icon appears on scenes where the angle can be
switched.
1 Touch SETUP and VISUAL to display the
DVD visual set up menu.
2 Touch M. ANGLE to turn angle icon display on.
# To turn the angle icon display off, touch
M. ANGLE again.
Setting the aspect ratio
There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. Be sure to select the correct TV aspect
for the display connected to VIDEO OUTPUT.
Section
Operating this unit
1 Touch SETUP and VISUAL and then
touch TV ASPECT.
2 Touch any of the following touch panel
keys to select the TV aspect.
! 16 : 9 – Wide screen picture (16:9) is displayed as it is (initial setting)
! LETTER BOX – The picture is the shape of a
letterbox with black bands at the top and
bottom of the screen
! PANSCAN – The picture is cut short at the
right and left of the screen
Notes
! When playing discs that do not specify
PANSCAN, playback is with LETTER BOX even
if you select PANSCAN setting. Confirm
whether the disc package bears the 16 : 9 LB
mark. (See page 9.)
! Some discs do not enable changing of the TV
aspect. For details, refer to the disc’s instructions.
Setting the parental lock
Some DVD video discs let you use parental
lock to restrict children from viewing violent
and adult-oriented scenes. You can set the parental lock to your desired level.
! When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be displayed. In this case, playback will begin
when the correct code number is input.
Setting the code number and level
You need to have registered a code number for
playing back discs with parantal lock.
1 Touch SETUP and VISUAL and then
touch PARENTAL.
2 Touch 0 to 9 to input a four digit code
number.
3 While the inputted number is displayed, touch ENTER.
The code number is set, and you can now set
the level.
Operating this unit
! When using a regular display, select either
LETTER BOX or PANSCAN. Selecting 16 : 9
may result in an unnatural picture.
! If you select the TV aspect, the unit’s display changes to the same setting.
03
4 Touch any of 1 to 8 to select the desired
level.
The parental lock level is set.
! LEVEL 8 – Playback of the entire disc is possible (initial setting)
! LEVEL 7 to LEVEL 2 – Playback of discs for
children and non-adult-oriented discs is
possible
! LEVEL 1 – Playback of discs for children
only is possible
Notes
! We recommend to keep a record of your code
number in case you forget it.
! The parental lock level is recorded on the disc.
Look for the level indication written at the disc
package, included literature or on the disc itself. Parental lock of this unit is not possible if
a parental lock level is not recorded in the
disc.
! With some discs, the parental lock may be active only on the scenes with certain levels. The
playback of those scenes will be skipped. For
details, refer to the instruction manual that
came with the discs.
Changing the level
You can change the set parental lock level.
En
37
Section
03
Operating this unit
1 Touch SETUP and VISUAL and then
touch PARENTAL.
Initial Settings
2 Touch 0 to 9 to input the registered
code number.
Using the initial settings, you can customize
various system settings to achieve optimal performance from this unit.
Adjusting initial settings
3 Touch ENTER.
This enters the code number, and you can now
change the level.
# If you input an incorrect code number, the
icon is displayed. Touch C and input the correct code number.
# If you forget your code number, refer to If you
forget your code number on this page.
1
4 Touch any of 1 to 8 to select the desired
level.
The new parental lock level is set.
1 Function display
Shows the function names.
If you forget your code number
1 Touch the source icon and then touch
OFF to turn this unit off.
Refer to Changing the level on the previous
page, and touch C 10 times. The registered
code number is canceled, letting you register
a new one.
# When the source icon is not displayed, you
can display it by touching the screen.
2 Press A.MENU button and touch INIT to
display the initial function names.
The function names are displayed and operable ones are highlighted.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
# When the multi-channel processor (e.g., DEQP8000) is connected to this unit, you can operate
D. ATT and RESET instead of REARSP.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
38
En
Section
Operating this unit
Switching the warning tone
% Touch D. WARN on the initial menu to
turn warning tone on.
# To turn warning tone off, touch D. WARN
again.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
% Touch AUX on the initial menu to turn
auxiliary setting on.
# To turn auxiliary setting off, touch AUX again.
Setting the rear output and
subwoofer controller
This unit’s rear output (rear speaker leads output and RCA rear output) can be used for fullrange speaker (FULL) or subwoofer (SUB. W)
connection. If you switch the rear output setting to SUB. W, you can connect a rear speaker lead directly to a subwoofer without using
an auxiliary amp.
Initially, the unit is set for rear full-range speaker connection (FULL). When rear output is
connected to full range speakers (when FULL
is selected), you can connect the RCA subwoofer output to a subwoofer. In this case, you
can select whether to use the subwoofer controller’s (low pass filter, phase) built-in SUB.W
or the auxiliary FULL.
! When the multi-channel processor (e.g.,
DEQ-P8000) is connected to this unit, you
cannot operate this function.
1
Touch NEXT on the initial menu.
2
Touch REARSP.
3 Touch a or b to switch the rear output
setting.
Touch a to select full-range speaker and FULL
appears in the display. Touch b to select subwoofer and SUB. W appears in the display.
# When no subwoofer is connected to the rear
output, select FULL.
# When a subwoofer is connected to the rear
output, set for subwoofer SUB. W.
# When the rear output setting is SUB. W, you
cannot change the subwoofer controller.
Operating this unit
If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
03
4 Touch c or d to switch the subwoofer
output or non fading output.
Touch c to select subwoofer output and
SUB.W appears in the display. Touch d to select non fading output and FULL appears in
the display.
Notes
! Even if you change this setting, there is no
output unless you turn the nonfading output
(refer to Using nonfading output on page 33)
or subwoofer output (refer to Using subwoofer
output on page 32) in the audio menu on.
! If you change the subwoofer controller, subwoofer output and nonfading output in the
audio menu return to the factory settings.
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause distortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the setting at HIGH to ensure quality sound.
! Only when the multi-channel processor
(e.g., DEQ-P8000) is connected to this unit,
you can operate this function.
En
39
Section
Operating this unit
03
1
Touch NEXT on the initial menu.
2 Touch D. ATT to switch the digital attenuator setting.
Touching D. ATT switches the digital attenuator settings in the following order:
HIGH—LOW
Switching the sound muting/
attenuation
Sound from this system is muted or attenuated automatically when the signal from the
equipment with mute function is received.
1
Touch NEXT on the initial menu.
2 Touch TEL to select any of the muting,
attenuation, mixing or off.
Touch TEL until the desired setting appears in
the display.
! MUTE – Muting
! ATT 20 – Attenuation (ATT 20 has a stronger effect than ATT 10)
! ATT 10 – Attenuation
! OFF – Turn the sound muting/attenuation
off
Notes
! The sound is muted or attenuated, MUTE or
ATT are displayed and no audio adjustment is
possible.
! Operation returns to normal when the phone
connection or the voice guidance is ended.
Resetting the audio functions
You can reset all audio functions except volume.
! Only when the multi-channel processor
(e.g., DEQ-P8000) is connected to this unit,
you can operate this function.
40
En
1
Touch NEXT on the initial menu.
2
Touch RESET.
3
Touch RESET.
4 Touch RESET again to reset audio functions.
# To cancel resetting the audio functions, touch
CANCEL.
Setting the illumination switch
You can choose whether to have the illumination of this unit switch on/off when the ignition
key is turned to the ACC position or the poweroff position.
% Touch ILM SW on the initial menu to
turn the illumination switch on.
Set the illumination switch ON to have the illumination of this unit remain on when the ignition key is turned to the ACC position. Set to
OFF to have the illumination off when the ignition key is turned to the ACC position.
# To turn the illumination switch off, touch
ILM SW again.
Note
Never set the illumination switch on if the vehicle
does not have the ACC position. It may cause battery leakage.
Section
Operating this unit
Other Functions
Introduction of setup adjustments
03
1
1 Setup menu display
Shows the setup function names.
% Press A.MENU button and touch SETUP
to display the setup function names.
The setup function names are displayed and
operable ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
Note
If you do not operate the setup function within
about 30 seconds, the display is automatically returned to the source display.
Setting the AV input
You can switch the setting according to the
connected component.
! Select VIDEO to watch video of a connected component as AV source.
! Select M-DVD to watch video of a connected DVD player as S-DVD source.
! Select EXT-V to watch video of a connected
video unit as EXT source.
% Touch AV IN on the setup menu to select the AV input setting.
Touch AV IN until the desired setting is selected.
Operating this unit
! OFF – No video component is connected
! VIDEO – External video component (such
as portable video player)
! M-DVD – Multi-DVD player connected with
RCA cable
! EXT-V – External video unit (such as
Pioneer products available in the future)
# When a multi-DVD player is connected with
an AV-BUS cable, do not select M-DVD otherwise
no picture will be displayed even if you select
S-DVD.
Setting for rear view camera
(back up camera)
CAUTION
Pioneer recommends the use of a camera
which outputs mirror reversed images, otherwise screen image may appear reversed.
This unit features a function that automatically
switches to the rear view camera video (REAR
VIEW CAMERA IN jack) when a rear view
camera is installed on your vehicle. When the
gear shift is in REVERSE (R) position, the
video automatically switches to a rear view
camera video. (For more details, consult your
dealer.)
! After you set up the rear view camera setting, move the gear shift in REVERSE (R)
and confirm if a rear view camera video
can be shown on the display.
! If the display should be switched to a rear
view camera video by error while you are
driving forward, change the rear view camera setting.
! To end watching a rear view camera video
and return to the source display, press
V.ADJ.
1
Touch B-CAM on the setup menu.
En
41
Section
Operating this unit
03
2 Touch c to turn rear view camera setting on.
# To turn rear view camera setting off, touch d.
3 Touch b and then touch c or d to select an appropriate setting for polarity.
Each time you touch c or d it switches between the following polarity:
! BATTERY – When the polarity of the connected lead is positive while the gear shift
is in REVERSE (R) position
! GND – When the polarity of the connected
lead is negative while the gear shift is in
REVERSE (R) position
Setting the automatic open
function
Setting the clock
Use these instructions to set the clock.
1 Touch CLOCK ADJUST on the setup
menu.
2 Touch OFF to turn the clock display on.
ON will appear in the display instead of OFF.
Clock display is now on.
# To turn the clock display off, touch ON.
3 Touch c or d to select the segment of
the clock display you wish to set.
Each time you touch c or d it will select one
segment of the clock display:
Hour—Minute
As you select segments of the clock display
the segment selected will be highlighted.
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide position, you can turn the set back on or off.
1
Touch FLP ST on the setup menu.
2 Touch a to turn the set back on and the
LCD panel slides to the back.
# Touch b to turn the set back off and the LCD
panel slides to the front.
3 Touch c or d to select the display to
open/close automatically or manually.
Touch c to select MANUAL, and you have to
press OPEN/CLOSE to open/close the display.
Touch d to select AUTO, and the display automatically opens/closes when power to this
unit is turned on.
42
En
4 Touch a or b to set the clock.
Each time you touch a it increases the selected hour or minute. Each time you touch b
it decreases the selected hour or minute.
Notes
! You can match the clock to a time signal by
touching JUST.
— If the minute is 00 to 29, the minutes are
rounded down. (e.g., 10:18 becomes
10:00.)
— If the minute is 30 to 59, the minutes are
rounded up. (e.g., 10:36 becomes 11:00.)
! Even when the sources are off, the clock display appears on the display.
Section
Operating this unit
03
Using the AUX source
Selecting AUX as the source
% Touch the source icon and then touch
AUX to select AUX as the source.
# When the source icon is not displayed, you
can display it by touching the screen.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switching the auxiliary setting on page 39.
Setting the AUX title
4 Touch d to move the cursor to the next
character position.
When the desired letter is displayed, touch d
to move the cursor to the next position and
then select the next letter. Touch c to move
backwards in the display.
Operating this unit
An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featuring RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owner’s manual.
5 Touch OK to store the entered title in
memory.
6 Touch ESC to return to the playback display.
The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the
source, press A.MENU button and touch
FUNCTION and then touch NAME EDIT.
2 Touch ABC to select the desired character type.
Touch ABC repeatedly to switch between the
following character types:
Alphabet (upper case), numbers and symbols
—alphabet (lower case)—European letters,
such as those with accents (e.g., á, à, ä, ç)
# You can select to input numbers and symbols
by touching 123.
3 Touch a or b to select a letter of the alphabet.
Each time you touch a it will display alphabet,
numbers or symbols in ascending order (A B
C ...). Each time you touch b it will display a
letter in descending order.
Selecting the background display
You can switch background displays while listening to each source.
% Press ENTERTAINMENT (ENT).
Each time you press ENTERTAINMENT (ENT)
the display changes in the following order:
Audio source
Background still picture—BGV (background
visual)—AV (AV input)
Video source
Video of currently selected source—background still picture—BGV (background visual)
—AV (AV input)
Note
In the following cases, the background display
will not change:
! When a list is displayed.
! When the AV (AV input) is not set to VIDEO
(refer to page 41).
En
43
Section
03
Operating this unit
Using the PGM button
You can operate the preprogrammed functions
for each source by using PGM.
% Press PGM to turn pause on when selecting the following sources:
! DVD – Built-in DVD player
! S-DVD – DVD player/multi-DVD player
! M-CD – Multi-CD player
! iPod – iPod
# To turn pause off, press PGM again.
% Press PGM and hold to turn BSM on
when selecting TUNER as the source.
Press PGM and hold until the BSM turns on.
# To cancel the storage process, press PGM
again.
% Press PGM and hold to turn BSSM on
when selecting TV as the source.
Press PGM and hold until the BSSM turns on.
# To cancel the storage process, press PGM
again.
% Press PGM to select the desired channel
select setting when selecting XM or SIRIUS
as the source.
Press PGM repeatedly to switch between the
following channel select settings:
CH NUMBER (channel number select setting)
—CATEGORY (channel category select
setting)
44
En
Section
Available accessories
04
XM tuner
3 Touch BAND to select an XM band.
Touch BAND repeatedly until the desired XM
band is displayed, XM1, XM2 or XM3.
Basic Operations
1 2 3
4
5 6
4 Touch c or d to select a desired
channel.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
# If you touch and hold c or d, you can increase or decrease the channel number continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on the next page.)
Available accessories
You can use this unit to control an XM satellite
digital tuner (GEX-P920XM), which is sold
separately.
For details concerning operation, refer to the
XM tuner’s operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner’s operation manual.
! This unit does not have the text scroll
function.
! With this unit, you can operate one additional function: XM channel direct
selection.
Notes
! If you do not use the touch panel keys for
eight seconds, they will be hidden automatically.
! You can go to the next group of touch panel
keys by touching d.
Switching the XM display
7
1
2
3
4
5
6
Source icon
XM band indicator
XM channel name
XM preset number indicator
XM channel number indicator
XM channel select setting indicator
Shows what channel select setting has been
selected. CH-Number is displayed when
CH NUMBER is selected, and Category is displayed when CATEGORY is selected.
7 Preset list display
1 Touch the source icon and then touch
XM to select the XM.
2 Touch the screen to display the touch
panel keys.
% Touch DISP to switch the XM display.
Channel name—Artist name/feature—Song/
program title—Channel category
Storing and recalling broadcast
stations
You can easily store up to six broadcast stations for later recall.
! Up to 18 stations, six for each of three XM
bands can be stored in memory.
% When you find a station that you want
to store in memory touch and hold a preset
tuning key P1 to P6 until the XM preset
number stops flashing.
The number you have touched will flash in the
XM preset number indicator and then remain
lit. The selected station has been stored in
memory.
En
45
Section
04
Available accessories
The next time you touch the same preset tuning key P1 to P6 the station is recalled from
memory.
# You can also use a and b to recall stations
assigned to preset tuning keys P1 to P6.
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P1 to P6 are not displayed, you can display them by touching d.
Switching the XM channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
Selecting an XM channel directly
You can select an XM channel directly by entering the desired channel number.
1 Touch DIRECT.
CHANNEL INPUT appears in the display.
2 Touch 0 to 9 to input the desired channel number.
# To cancel the input numbers, touch C.
3 While the input number is displayed,
touch ENTER.
The XM channel of entered number is
selected.
Displaying the Radio ID
Channel number select setting
If you select CH : 000, the ID code is displayed.
% Touch MODE to select the desired channel select mode.
Touch MODE repeatedly to switch between
the following channel select modes:
CH NUMBER (channel number select setting)
—CATEGORY (channel category select
setting)
Selecting a channel in the channel
category
1 Touch MODE to select the channel category select mode.
Touch MODE repeatedly to switch between
the following channel select modes:
CH NUMBER (channel number select setting)
—CATEGORY (channel category select
setting)
2 Touch a or b to select the desired channel category.
3 Touch c or d to select the desired channel in the selected channel category.
46
En
% Touch c or d to select CH : 000.
Channel category select setting
RADIO ID is provided as a channel category
for displaying the ID code.
% Touch a or b to select RADIO ID from
channel category.
# If you select another channel, display of the ID
code is canceled.
# Display of the ID code repeats displaying
RADIO ID and the ID code one after the other.
Section
Available accessories
04
SIRIUS Satellite Radio tuner
Basic Operations
1
2
3
4 5
6
1
2
3
4
5
Source icon
SIRIUS band indicator
SIRIUS preset number indicator
SIRIUS channel number indicator
SIRIUS channel select setting indicator
Shows what channel select setting has been
selected. CH-Number is displayed when
CH-Number is selected, and Category is displayed when Category is selected.
6 SIRIUS channel name
1 Touch the source icon and then touch
SIRIUS to select SIRIUS.
4 Touch c or d to select a desired
channel.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
# If you touch and hold c or d, you can increase or decrease the channel number continuously.
# You can also select a channel by pressing c
or d button.
# You can also perform tuning from a desired
channel category. (Refer to Selecting a channel in
the channel category on the next page.)
Available accessories
You can use this unit to control a SIRIUS Satellite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation manual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIRIUS operation manual.
! This unit does not have the text scroll
function.
! With this unit, you can operate one additional function: SIRIUS channel direct selection. Refer to Selecting a SIRIUS channel
directly on the next page.
3 Touch BAND to select a band.
Touch BAND repeatedly until the desired SIRIUS band is displayed, SIRIUS1, SIRIUS2 or
SIRIUS3.
Notes
! If you do not use the touch panel keys for
eight seconds, they will be hidden automatically.
! It may take a few seconds before you can hear
anything while this unit acquires and processes the satellite signal when you change
the source to SIRIUS tuner or select a
channel.
! Display changes as follows every time the
channels are switched. In the selected display,
text automatically scrolls.
Channel name—Selected display
For details, refer to Switching the SIRIUS display on this page.
Switching the SIRIUS display
% Touch DISP to switch the SIRIUS display.
Channel number—Channel name—Channel
Category—Artist name/feature—Song/program title—Composer
# When you change the display, text automatically scrolls.
2 Touch the screen to display the touch
panel keys.
En
47
Section
04
Available accessories
Storing and recalling broadcast
stations
You can easily store up to six broadcast stations for later recall.
! Up to 18 stations, six for each of three SIRIUS bands can be stored in memory.
% When you find a station that you want
to store in memory keep touching a preset
tuning key P1 to P6 until PCH SET is displayed.
The selected station has been stored in memory.
The next time you touch the same preset tuning key P1 to P6 the station is recalled from
memory.
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P1 to P6 are not displayed, you can display them by touching LIST.
Selecting the SIRIUS channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
% Touch MODE to select the desired channel select mode.
Touch MODE repeatedly to switch between
the following channel select modes:
CH-Number (channel number select setting)
—Category (channel category select setting)
Selecting a channel in the channel
category
Channels are organized into various program
categories, e.g. Rock, Classic, Jazz. You can
specify channels by selecting the desired
category.
48
En
1 Touch MODE to select the channel category select mode.
Touch MODE repeatedly to switch between
the following channel select modes:
CH-Number (channel number select setting)
—Category (channel category select setting)
2 Touch a or b to select the desired channel category.
3 Touch c or d to select the desired channel in the selected channel category.
Selecting a SIRIUS channel directly
You can select a SIRIUS channel directly by
entering the desired channel number.
1 Touch DIRECT.
CHANNEL INPUT appears in the display.
2 Touch 0 to 9 to input the desired channel number.
# To cancel the input numbers, touch C.
3 While the input number is displayed,
touch ENTER.
The SIRIUS channel of entered number is
selected.
Displaying the Radio ID
If you select CH:000, the ID code is displayed.
% Touch c or d to select CH : 000.
# To select CH:000, set the channel select setting to CH-Number. About the channel select setting, refer to Selecting the SIRIUS channel select
mode on this page
Section
Available accessories
04
Playing songs on iPod
Listening to songs on your iPod
1
3
2
Note
If the playback is stopped for any reason, touch
TOP and refine your seach for a song.
Browsing for a song
The operation of this unit to control an iPod is
designed to be as close to the operation of the
iPod as possible for easy operation and song
search.
6 5
4
1
2
3
4
5
Source icon
Song number indicator
Play time indicator
Song title indicator
Repeat indicator
Shows when repeat range is selected to current track.
6 RDM indicator
Shows when random play is set to TRACK or
ALBUM.
1 Touch the source icon and then touch
iPod to select the iPod.
# You can also select the iPod source by pressing SOURCE repeatedly.
# When the iPod is not connected to this unit,
you cannot select the iPod as a source.
2 Touch the screen to display the touch
panel keys.
3 To skip back or forward to another
song, touch o or p.
Touching p skips to the start of the next
song. Touching o once skips to the start of
the current song. Touching it again will skip to
the previous song.
1
Available accessories
You can use this unit to control an iPod adapter,
which is sold separately.
4 To perform fast forward or reverse,
keep touching o or p.
Touch TOP to display the top menu.
2 Touch one of the categories in which
you want to search for a song.
!
!
!
!
!
PLAYLISTS (playlists)
GENRES (genres)
ARTISTS (artists)
ALBUMS (albums)
SONGS (songs)
3 Touch a list title that you want to play.
Repeat this operation until you find the desired song.
# You can start a playback of all the songs in the
selected list (GENRES, ARTISTS or ALBUMS). To
do this, keep touching the list title.
# To go to the next group of list titles, touch .
# To return to the previous group of list titles,
touch .
# To return to the previous menu, touch .
# To go to the top menu of the list search, touch
TOP.
Pausing a song
% Touch f during playback.
# To resume playback at the same point that you
turned pause on, touch f again.
En
49
Section
04
Available accessories
Displaying text information on
iPod
1 Press A.MENU button and then touch
FUNCTION to display the function names.
% Touch DISP.
Touch DISP repeatedly to switch between the
following settings:
T. Title (song title)—Artist (artist name)—
Album (album title)
2 Touch RANDOM to select the random
play method.
Touch RANDOM repeatedly until the desired
random play method appears in the display.
# If the characters recorded on the iPod are not
compatible with a head unit, those characters
will not be displayed.
Note
You can scroll the title to the left by keeping
touching DISP.
Repeating play
For playback of the songs on the iPod, there
are two repeat play ranges: TRACK (repeat
one song) and ALL (repeat all songs in the
list).
! While REPEAT is set to TRACK, you cannot
select the other songs.
1 Press A.MENU button and then touch
FUNCTION to display the function names.
2 Touch REPEAT to select the repeat
range.
Touch REPEAT repeatedly until the desired repeat range appears in the display.
! TRACK – Repeat just the current song
! ALL – Repeat all songs in the selected list
Playing songs in a random
order (shuffle)
For playback of the songs on the iPod, there
are two random play methods: TRACK (play
back songs in a random order) and ALBUM
(play back albums in a random order).
50
En
! TRACK – Play back songs in a random
order within the selected list
! ALBUM – Select an album randomly, and
then play back all the songs in it in order
! OFF – Cancel the random play
Section
Available accessories
04
Multi-CD Player
Basic Operations
1
2
3
4
5
1
2
3
4
5
Source icon
Disc number indicator
Track number indicator
Play time indicator
Disc list display
Shows the disc title list.
1 Touch the source icon and then touch
M-CD to select the multi-CD player.
2 Touch the screen to display the touch
panel keys.
3 Touch a disc title on the list to play
back.
Operable disc titles are highlighted. If you
want to select a disc located at 7 to 12, touch
or
to display 07 to 12.
# When the disc titles of 01-06 or 07-12 are not
displayed, you can display them by touching
LIST.
# You can also sequentially select a disc by
pressing a/b button.
5 To perform fast forward or reverse,
keep touching c or d.
Notes
! When the multi-CD player performs the preparatory operations, READY is displayed.
! If an error message such as ERROR-02 is displayed, refer to the multi-CD player owner’s
manual.
! If there are no discs in the multi-CD player magazine, NO DISC is displayed.
! If you do not use the touch panel keys within
30 seconds, they will be hidden automatically.
Available accessories
You can use this unit to control a multi-CD
player, which is sold separately.
! Only those functions described in this manual are supported by 50-disc multi-CD
players.
! This unit is not designed to operate disc title
list functions with a 50-disc multi-CD player.
4 To skip back or forward to another
track, touch c or d.
Touching d skips to the start of the next track.
Touching c once skips to the start of the current track. Touching again will skip to the previous track.
Introduction of advanced
operations
You can use these functions only with a multiCD player that supports them.
1 Press A.MENU button to display MENU.
MENU appears on the display.
2 Touch FUNCTION to display the function names.
The function names are displayed and operable ones are highlighted.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
# To return to the previous display, touch BACK.
# To return to the playback display, touch ESC.
En
51
Section
04
Available accessories
Function and operation
REPEAT, RANDOM, SCAN, PAUSE,
Compression and T. EDIT operations are basically the same as that of the built-in DVD
player.
Function name
Operation
Using ITS playlists
REPEAT
Refer to Repeating play on page 27.
But the repeat play ranges you can
select are different from that of the
built-in DVD player. The repeat play
ranges of the multi-CD player are
as below:
! M-CD – Repeat all discs in the
multi-CD player
! TRACK – Repeat just the current track
! DISC – Repeat the current disc
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selections.
RANDOM
Refer to Playing tracks in random
order on page 27.
SCAN
Refer to Scanning tracks of a CD on
page 28.
PAUSE
Refer to Pausing disc playback on
page 24.
Compression
Refer to Using compression and
bass emphasis on page 54.
ITS PLAY
Refer to Using ITS playlists on this
page.
ITS MEMO
Refer to Using ITS playlists on this
page.
T. EDIT
Refer to Entering disc titles on the
next page.
Notes
! If you do not operate the function within about
30 seconds, the display is automatically returned to the playback display.
! If you select other discs during repeat play,
the repeat play range changes to M-CD.
! If you perform track search or fast forward/reverse during TRACK, the repeat play range
changes to DISC.
! After track or disc scanning is finished, normal playback of the tracks will begin again.
52
! When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot
switch to T. EDIT. The disc title has already
been recorded on a CD TEXT disc.
En
Creating a playlist with ITS programming
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold before the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
1 Play a CD that you want to program.
Touch a or b to select the CD.
2
Touch NEXT on the function menu.
3
Touch ITS MEMO.
4 Touch c or d to select the desired
track.
5 Touch MEMORYa to store the currently
playing track in the playlist.
MEMORY is displayed and the currently playing selection is added to your playlist. The display then shows track number again.
Note
After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest
one.
Section
Available accessories
Playback from your ITS playlist
1 Select the repeat range.
Refer to Playing tracks in random order on
page 27.
2
Touch NEXT on the function menu.
3 Touch ITS PLAY to turn ITS play on.
Playback begins of those tracks from your
playlist within the previously selected M-CD or
DISC ranges.
# If no tracks in the current range are programmed for ITS play, then ITS EMPTY is displayed.
# To turn ITS play off, touch ITS PLAY again.
# If there are no tracks from your playlist in the
current range, ITS EMPTY is displayed and normal play resumes.
Erasing a CD from your ITS playlist
You can delete all tracks of a CD from your ITS
playlist if ITS play is off.
1 Play the CD that you want to delete.
Touch a or b to select the CD.
2
Touch NEXT on the function menu.
3
Touch ITS MEMO.
Available accessories
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player will begin to play.
04
4 Touch CLEARb to erase all tracks on the
currently playing CD from your ITS playlist.
ITS CLEAR is displayed and all tracks on the
currently playing CD are erased from your
playlist.
Erasing a track from your ITS playlist
You can delete a track from your ITS playlist if
ITS play is on.
If ITS play is already on, skip to step 2.
1 Play the CD with the track you want to
delete from your ITS playlist, and turn ITS
play on.
Refer to Playback from your ITS playlist on this
page.
2
Touch NEXT on the function menu.
3
Touch ITS MEMO.
4 Touch c or d to select the desired
track.
5 Touch CLEARb to erase the track from
your ITS playlist.
The currently playing selection is erased from
your ITS playlist and playback of the next track
from your ITS playlist begins.
Entering disc titles
Use the disc title input feature to store up to
100 CD titles (with ITS playlist) into the multiCD player. Each title can be up to 10 characters long.
The operation is the same as that of the builtin DVD player.
Refer to Entering disc titles on page 29.
! When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot
switch to T. EDIT. The disc title has already
been recorded on a CD TEXT disc.
Notes
! Titles remain in memory, even after the disc
has been removed from the magazine, and
are recalled when the disc is reinserted.
! After data for 100 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.
En
53
Section
04
Available accessories
Displaying disc titles
DVD Player
% Touch DISP.
Touch DISP repeatedly to switch between the
following settings:
DISC LIST (disc list)—D.Title (disc title)
When you select D.Title, the title of the currently playing disc is shown in the display.
Basic Operations
# If no title has been entered for the currently
playing disc, NO DISC TITLE is displayed.
Using CD TEXT functions
You can use these functions only with a CD
TEXT compatible multi-CD player.
The operation is the same as that of the builtin DVD player.
Refer to Text information on page 26.
You can use this unit to control a DVD player or
multi-DVD player, which is sold separately.
For details concerning operation, refer to the
DVD player’s or multi-DVD player’s operation
manual. This section provides information on
DVD operations with this unit which differs
from that described in the DVD player’s or
multi-DVD player’s operation manual.
! Multi-DVD player that has ITS functions
and disc title functions can also be connected to this unit. In this case, ITSPLAY,
ITS MEMO and disc title input can be controlled.
12 3
4
5
6
Selecting tracks from the track
title list
You can use these functions only with a CD
TEXT compatible multi-CD player.
The operation is the same as that of the builtin DVD player.
Refer to Selecting tracks from the track title list
on page 29.
Using compression and bass
emphasis
Using COMP (compression) and DBE (dynamic bass emphasis) functions lets you adjust the sound playback quality of the multiCD player.
% Touch COMP on the function menu to
select your favorite setting.
COMP OFF—COMP 1—COMP 2—
COMP OFF—DBE 1—DBE 2
# If the multi-CD player does not support
COMP/DBE, NOCOMP is displayed when you attempt to select it.
54
En
7
1 Source icon
2 Media indicator
3 Disc number indicator
Shows the disc number currently playing
when using a multi-DVD player.
4 Title/Folder number indicator
5 Chapter/track number indicator
6 Play time indicator
7 Disc list display
Shows the disc title list.
1 Touch the source icon and then touch
S-DVD to select the DVD player.
# When the source icon is not displayed, you
can display it by touching the screen.
Section
Available accessories
2 Touch the screen to display the touch
panel keys.
4 To perform fast forward or reverse,
keep touching c or d.
Note
If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.
Selecting a disc
2 Touch FUNCTION to display the function names.
The function names are displayed and operable ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the playback display, touch ESC.
Function and operation
Play mode, Random mode, Scan mode,
Pause and T. EDIT operations are basically the
same as that of the built-in DVD player.
Also, ITSPLAY and ITS MEMO operations are
basically the same as that the multi-CD player.
Function name
Operation
Play mode
Refer to Repeating play on page 27.
But the repeat play range that you
can select is vary depending on
the type of disc or system. The repeat play ranges of the DVD
player/multi-DVD player are as
below:
During PBC playback of Video
CDs, this function cannot be operated.
! DISC – Repeat the current disc
! FOLDER – Repeat the current
folder
! TITLE – Repeat just the current
title
! CHAPTER – Repeat just the
current chapter
! TRACK – Repeat just the current track
Random mode
Refer to Playing tracks in random
order on page 27.
Scan mode
Refer to Scanning tracks of a CD on
page 28.
Pause
Refer to Pausing disc playback on
page 24.
ITSPLAY
Refer to Using ITS playlists on
page 52.
ITS MEMO
Refer to Using ITS playlists on
page 52.
T. EDIT
Refer to Entering disc titles on
page 53.
! You can operate this function only when a
multi-DVD player is connected to this unit.
% Touch a disc title on the list to play
back.
Operable disc titles are highlighted.
# You can also select a disc by touching a or b.
# You can also select a disc by pressing and
holding a or b button.
# When the list of titles is not displayed, touch
LIST.
Selecting a folder
! You can operate this function only when a
DVD player which is corresponding to compressed audio playback is connected to
this unit.
% Touch a or b to select a folder.
Introduction of advanced
operations
1 Press A.MENU button to display MENU.
MENU appears on the display.
En
Available accessories
3 To skip back or forward to another
chapter/track, briefly touch c or d.
04
55
Section
04
Available accessories
TV tuner
Notes
! If you select other discs during repeat play,
the repeat play range changes to DISC.
! During video CD or CD playback, if you perform track search or fast forward/reverse during TRACK, the repeat play range changes to
DISC.
! During compressed audio playback, if you select another folder during repeat play, the repeat play range changes to DISC.
! During compressed audio playback, if you perform track search or fast forward/reverse during TRACK, the repeat play range changes to
FOLDER.
! The ITS function of a DVD player differs
slightly from ITS playback with a multi-CD
player. With multi-DVD player, ITS playback applies only to the CD playing. For details, refer
to Using ITS playlists on page 52.
Basic Operations
You can use this unit to control a TV tuner (e.g.
GEX-P5700TV), which is sold separately.
For details concerning operation, refer to the
TV tuner’s operation manual. This section provides information on TV operations with this
unit which differs from that described in the
TV tuner’s operation manual.
1
2
3
4
5
1
2
3
4
5
Source icon
Band indicator
Preset number indicator
Channel indicator
Preset list display
Shows the preset list.
1 Touch the source icon and then touch
TV to select the TV.
# When the source icon is not displayed, you
can display it by touching the screen.
2 Touch the screen to display the touch
panel keys.
3 Touch BAND to select a band.
Touch BAND repeatedly until the desired band
is displayed, TV1 or TV2.
4 To select a preset channel, touch a preset channel on the list.
The preset channel you selected is tuned in.
56
En
Section
Available accessories
# When the list of channels is not displayed,
touch LIST.
6 To perform seek tuning, keep touching
c or d for about one second and release.
The tuner will scan the channels until a broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the keys.
Note
If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.
Storing and recalling broadcast
stations
If you touch any of the preset tuning keys P01
to P12 you can easily store up to 12 broadcast
stations for later recall with the touch of a key.
% When you find a station that you want
to store in memory, keep touching one of
preset tuning keys P01 to P12 until the preset number stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected station has been stored in memory.
The next time you touch the same preset tuning key the station is recalled from memory.
# To switch between P01 to P06 and P07 to P12,
touch or .
# When the touch panel keys are not displayed,
you can display them by touching the screen.
# When P01 to P06 and P07 to P12 are not displayed, you can display them by touching LIST.
Notes
! Up to 24 stations, 12 for each of two TV bands,
can be stored in memory.
! You can also use a and b to recall stations
assigned to preset tuning keys P01 to P12.
Introduction of advanced
operations
1 Press A.MENU button to display MENU.
MENU appears on the display.
Available accessories
5 To perform manual tuning, briefly
touch c or d.
The channels move up or down step by step.
04
2 Touch FUNCTION to display the function names.
The function names are displayed and operable ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the TV picture, touch ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the TV picture.
Storing the strongest broadcast
stations sequentially
% Touch BSSM on the function menu to
turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM disappears.
# To cancel the storage process, touch BSSM
again.
En
57
Section
04
Available accessories
Note
Storing broadcast stations with BSSM may replace broadcast stations you have saved using
P01 to P12.
Digital Signal Processor
Introduction of DSP adjustments
You can use this unit to control multi-channel
processor (e.g. DEQ-P8000), which is sold separately.
! Some functions may differ depending on the
multi-channel processor connected to this
unit.
1
1 DSP display
Shows the DSP function names.
By carrying out the following settings/adjustments in the order shown, you can create a finely-tuned sound field effortlessly.
1 Setting the speaker setting
2 Using the position selector
3 Auto TA and EQ (auto-time alignment and autoequalizing)
4 Adjusting the time alignment
5 Adjusting the speaker output levels using a
test tone
6 Selecting a cross-over frequency
7 Adjusting the speaker output levels
8 Adjusting 3-band parametric equalizer
1 Press A.MENU button to display MENU.
MENU appears on the display.
2 Touch DSP to display the DSP function
names.
The DSP function names are displayed and
operable ones are highlighted.
# To go to the next group of function names,
touch NEXT.
58
En
Section
Available accessories
Note
If you do not operate the DSP function within
about 30 seconds, the display is automatically returned to the source display.
Using the sound field control
The SFC function creates the sensation of a
live performance.
! The acoustics of different performance environments are not the same and depend
on the extent and contour of space through
which sound waves move and on how
sounds bounce off the stage, walls, floors
and ceilings. At a live performance you
hear music in three stages: direct sound,
early reflections, and late reflections, or reverberations. Those factors are programed
into the SFC circuitry to recreate the acoustics of various performance settings.
1 Press EQ button and hold to switch to
SFC function.
Press EQ and hold until SFC appears in the
display.
# To switch to equalizer function, press EQ and
hold again.
2 Press EQ to select the desired SFC
mode.
Press EQ repeatedly to switch between the following mode:
MUSICAL (musical)—DRAMA (drama)—
ACTION (action)—JAZZ (jazz)—HALL (hall)—
CLUB (club)—OFF (off)
Available accessories
# To return to the previous group of function
names, touch PREV.
# When playing discs recorded with more than
96 kHz sampling frequency, you cannot use audio
functions. Also, equalizer curve setting,
POSITION, AUTO EQ and AUTOTA will be cancelled.
# When playing discs recorded with more than
96 kHz sampling frequency, audio is outputted
from front speakers only.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# When playing other than the DVD disc, you
cannot switch to D.R.C.
# When neither FRONT-L nor FRONT-R is selected in POSITION, you cannot switch to
TIME ALIGN.
# When both the center speaker and the rear
speaker are set to OFF in the speaker setting, you
cannot switch to DOLBY PL II.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.
04
Note
If the source is a 2-channel LPCM audio or a 2channel Dolby Digital audio and you select SFC
effects that are most applicable for 5.1-channel
audio (i.e., MUSICAL, DRAMA or ACTION), we
recommend turning Dolby Pro Logic II on. On the
other hand, when selecting SFC effects that are
intended for use with 2-channel audio (i.e., JAZZ,
HALL or CLUB), we recommend turning Dolby
Pro Logic II off.
Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automatically adjust the speaker output levels and inserts a delay time to match the number and
position of occupied seats. When used in conjunction with the SFC, the feature will make
the sound image more natural and offer a panoramic sound that envelops you.
1 Touch POSITION on the DSP function
menu.
En
59
Section
04
Available accessories
2 Touch c/d/a/b to select a listening position.
Touch one of these, c/d/a/b, to select a listening position as listed in the table.
Key
Display
Position
c
FRONT-L
Front seat left
d
FRONT-R
Front seat right
a
FRONT
Front seats
Adjusting source levels
b
ALL
All seats
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent radical changes in volume when switching between sources.
! Settings are based on the FM tuner volume
level, which remains unchanged.
# To cancel the selected listening position,
touch the same key again.
Note
When you make adjustments to the listening position, the speaker outputs are automatically set
for appropriate levels. You can tailor the levels
more precisely referring to Adjusting the speaker
output levels using a test tone or Adjusting the
speaker output levels.
Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening environment in all occupied seats.
1 Touch FAD/BAL on the DSP function
menu.
2 Touch a or b to adjust front/rear
speaker balance.
Each time you touch a or b it moves the
front/rear speaker balance towards the front or
the rear.
FRONT:25 to REAR:25 is displayed as the
front/rear speaker balance moves from front to
rear.
# FR:00 is the proper setting when only two
speakers are used.
60
3 Touch c or d to adjust left/right speaker balance.
Each time you touch c or d it moves the left/
right speaker balance towards the left or the
right.
LEFT:25 to RIGHT:25 is displayed as the left/
right speaker balance moves from left to right.
En
1 Compare the FM tuner volume level
with the level of the source you wish to adjust.
2
Touch SLA on the DSP function menu.
3 Press a or b to adjust the source volume.
Each time you press a or b it increases or decreases the source volume.
+4 to –4 is displayed as the source volume is
increased or decreased.
Notes
! The AM tuner volume level can also be adjusted with source level adjustments.
! Video CD, CD and compressed audio are set
to the same source level adjustment volume
automatically.
! DVD and the optional DVD player are set to
the same source level adjustment volume
automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Section
Available accessories
! AUX (auxiliary input) and AV (AV input) are set
to the same source level adjustment volume
automatically.
The dynamic range refers to the difference between the largest and softest sounds. The dynamic range control compresses this
difference so that you can clearly hear sounds
even at low volume levels.
! The dynamic range control is effective only
on Dolby Digital sounds.
! When playing other than the DVD disc, you
cannot switch to D.R.C.
1
Touch D.R.C on the DSP function menu.
# When playing other than the DVD disc, you
cannot switch this mode.
2 Touch a to turn the dynamic range control on.
# To turn dynamic range control off, touch b.
Using the down-mix function
The down-mix function allows you to play back
multi-channel audio in 2 channels.
1 Touch DOWN MIX on the DSP function
menu.
2 Touch c or d to select the desired level.
Touch c to select Lo/Ro. Touch d to select
Lt/Rt.
! Lo/Ro – Stereo mix the original audio that
do not contain channel modes such as surround components.
! Lt/Rt – Down mix so that the surround
components can be restored (decoded).
Using the direct control
You can override audio settings to check for effectiveness of your audio settings.
! All audio functions are locked out when the
direct control is on except VOLUME.
1 Touch DIGITL DIRECT on the DSP function menu.
2
Touch a to turn the direct control on.
# To turn direct control off, touch b.
Using the Dolby Pro Logic II
Available accessories
Using the dynamic range control
04
Dolby Pro Logic II creates five full-bandwidth
output channels from two-channel sources to
achieve high-purity matrix surround.
! Dolby Pro Logic II supports up to 48kHz
sampling rate stereo source and has no effect on other types of source.
1
Touch NEXT on the DSP function menu.
2
Touch DOLBY PL II.
3 Touch any of the following touch panel
keys to select the desired mode.
! MOVIE – The Movie mode suitable for
movie playback
! MUSIC – The Music mode suitable for
music playback
! MATRIX – The Matrix mode for when FM
radio reception is weak
! OFF – Turn Dolby Pro Logic II off
! ADJUST – Adjust the Music mode
# You can operate ADJUST only when MUSIC
has been selected.
Adjusting the Music mode
You can adjust the Music mode with the following three controls.
En
61
Section
Available accessories
04
! Panorama (PANORAMA) extends the front
stereo image to include the surround
speakers for an exciting “wraparound” effect.
! Dimension (DIMENSION) allows you to
gradually adjust the sound field either towards the front or the rear.
! Center Width Control (CENTER WDT) allows center-channel sounds to be positioned between the center speaker and the
left/right speakers. It improves the left-center-right stage presentation for both the driver and the front passenger.
7 Touch b to select CENTER WDT and
then touch c or d to adjust the center
image.
Each time you touch c or d it gradually
spreads the center channel sound into the
front left and right speakers over a range 0 to
7.
3 is the default and it’s recommended for
most recordings. 0 places all center sound in
the center speaker. 7 places all center sound
equally in the left/right speakers.
Setting the speaker setting
1
Touch NEXT on the DSP function menu.
2
Touch DOLBY PL II.
3
Touch MUSIC and then touch ADJUST.
# You can operate ADJUST only when MUSIC
has been selected.
4 Touch a or b to select PANORAMA (panorama).
Each time you touch a or b selects the item
in the following order:
PANORAMA (panorama)—DIMENSION (dimension)—CENTER WDT (center width)
5 Touch c to turn the panorama control
on.
# To turn the panorama control off, touch d.
6 Touch b to select DIMENSION and then
touch c or d to adjust front/surround
speaker balance.
Each time you touch c or d it moves the
sound towards the front or the surrounds.
+3 to –3 is displayed as the front/surround
speaker balance moves from front to surrounds.
You need to make with/without (or yes/no) and
size (bass reproducing capacity) selection/adjustments depending on the installed speakers. The size needs to be set to LARGE (large)
if the speaker is capable of reproducing
sounds of about 100 Hz or below. Otherwise
select SMALL (small).
! Low frequency range is not output if the
subwoofer is set to OFF and the front and
rear speakers set to SMALL or OFF.
! It is imperative that non-installed speakers
be set to OFF.
! Set the front or rear speaker to LARGE if
the speaker is capable of reproducing bass
content, or if no subwoofer is installed.
1
Touch NEXT on the DSP function menu.
2
Touch SP SET.
3 Touch a or b to select the speaker to
be adjusted.
Each time you touch a or b selects the speaker in the following order:
FRONT (front speakers)—CENTER (center
speaker)—REAR (rear speakers)—
SUB WOOFER (subwoofer)—PHASE (subwoofer setting)
# You can switch to PHASE only when the subwoofer has been set to ON.
62
En
Section
Available accessories
# You cannot select OFF, when FRONT (front
speakers) have been selected.
# You can select ON or OFF, when
SUB WOOFER (subwoofer) has been selected.
# You can switch REVERSE (reverse phase) or
NORMAL (normal phase), when PHASE (subwoofer setting) has been selected.
Correcting the subwoofer’s phase
If trying to boost the bass output of the subwoofer doesn’t do much or rather makes you
feel that the bass gets more murky, this may
indicate that the subwoofer’s output and bass
content you hear over other speakers cancel
each other out. To remove this problem, try
changing the phase setting for the subwoofer.
1
Touch NEXT on the DSP function menu.
2
Touch SP SET.
3 Touch a or b to select SUB WOOFER
(subwoofer).
Each time you touch a or b selects the speaker in the following order:
FRONT (front speakers)—CENTER (center
speaker)—REAR (rear speakers)—
SUB WOOFER (subwoofer)—PHASE (subwoofer setting)
4
Touch c to turn subwoofer output on.
# To turn subwoofer output off, touch d.
5 Touch b and then touch c or d to select the phase of subwoofer output.
Touch d to select normal phase and
NORMAL appears in the display. Touch c to
select reverse phase and REVERSE appears in
the display.
Note
When playing a 2-channel mono source with Pro
Logic turned on, there may be occasions when
the following will occur:
! No audio is outputted if the center speaker
setting is SMALL or LARGE and no center
speaker is installed.
! Audio is heard only over the center speaker if
installed and the center speaker setting is
SMALL or LARGE.
Selecting a cross-over frequency
Available accessories
4 Touch c or d to select the correct size
for the selected speaker.
Each time you touch c or d selects the size in
the following order:
OFF (off)—SMALL (small)—LARGE (large)
04
You can select a frequency, under which
sounds are reproduced through the subwoofer. If the installed speakers include one whose
size has been set to SMALL, you can select a
frequency, under which sounds are reproduced through a LARGE speaker or subwoofer.
1
Touch NEXT on the DSP function menu.
2
Touch CROSS OVER.
3 Touch a or b to select the speaker to
be adjusted.
Each time you touch a or b selects the speaker in the following order:
FRONT (front speakers)—CENTER (center
speaker)—REAR (rear speakers)—
SUB WOOFER (subwoofer)
4 Touch c or d to select cross-over frequency.
Each time you touch c or d selects cross-over
frequencies in the following order:
63—80—100—125—160—200 (Hz)
En
63
Section
Available accessories
04
Note
Selecting a cross-over frequency is to set a crossover frequency of the subwoofer’s L.P.F. (low-pass
filter) and that of the SMALL speaker H.P.F. (highpass filter). The cross-over frequency setting has
no effect if the subwoofer is set to OFF and other
speakers are set to LARGE or OFF.
Adjusting the speaker output
levels
You can readjust the speaker output levels
using a test tone while listening to music.
1
Touch NEXT on the DSP function menu.
2
Touch SP LEVEL.
3 Touch a or b to select the speaker to
be adjusted.
Each time you touch a or b selects the speaker in the following order:
FRONT-L (front speaker left)—CENTER (center
speaker)—FRONT-R (front speaker right)—
REAR-R (rear speaker right)—REAR-L (rear
speaker left)—SUB WOOFER (subwoofer)
# You cannot select speakers whose size is set
at OFF.
4 Touch c or d to adjust the speaker output level.
Each time you touch c or d increases or decreases the speaker output level. +10 to –10 is
displayed as the level is increased or decreased.
Adjusting the speaker output
levels using a test tone
This function allows you to easily get the overall balance right among the speakers.
1
Touch NEXT on the DSP function menu.
2
Touch TEST TONE.
3 Touch START to start the test tone output.
The test tone is outputted. It rotates from
speaker to speaker in the following sequence
at intervals of about two seconds. The current
settings for the speaker over which you hear
the test tone are shown in the display.
FRONT-L (front speaker left)—CENTER (center
speaker)—FRONT-R (front speaker right)—
REAR-R (rear speaker right)—REAR-L (rear
speaker left)—SUB WOOFER (subwoofer)
Check each speaker output level. If no adjustments are needed, perform step 5 to stop the
test tone.
# The settings do not appear for speakers
whose size is set OFF.
4 Touch c or d to adjust the speaker output level.
Each time you touch c or d increases or decreases the speaker output level. +10 to –10 is
displayed as the level is increased or decreased.
# The test tone rotates to the next speaker after
about two seconds from the last operation.
5 Touch STOP to stop the test tone output.
Notes
! You can also display the speaker setting menu
by pressing BOOST button.
! To adjust the speaker output levels in this
mode is the same as making the speaker output levels at TEST TONE. Both provide the
same results.
64
En
Notes
! You can also display the speaker output level
menu by pressing BOOST button.
Section
Available accessories
Using the time alignment
The time alignment lets you adjust the distance between each speaker and the listening
position.
1
Touch NEXT on the DSP function menu.
2
Touch TIME ALIGN.
3 Touch any of the following touch panel
keys to select the time alignment.
! INIT – Initial time alignment (factory setting)
! AUTOTA – Time alignment created by auto
TA and EQ. (Refer to Auto TA and EQ (autotime alignment and auto-equalizing) on
page 67.)
! CUSTOM – Adjusted time alignment that
you can create for yourself
! OFF – Turn the time alignment off
! ADJUST – Adjust the time alignment as desired
# You cannot select AUTOTA if auto TA and EQ
has not been carried out.
# You cannot select ADJUST when neither
FRONT-L nor FRONT-R is selected in POSITION.
Adjusting the time alignment
You can adjust the distance between each
speaker and the selected position.
! An adjusted time alignment is memorized
in CUSTOM.
1
Touch NEXT on the DSP function menu.
2 Touch TIME ALIGN and then touch
ADJUST.
# You cannot select ADJUST when neither
FRONT-L nor FRONT-R is selected in POSITION.
3 Touch a or b to select the speaker to
be adjusted.
Each time you touch a or b selects the speaker in the following order:
FRONT-L (front speaker left)—CENTER (center
speaker)—FRONT-R (front speaker right)—
REAR-R (rear speaker right)—REAR-L (rear
speaker left)—SUB WOOFER (subwoofer)
# You cannot select speakers whose size is set
at OFF.
Available accessories
! If needed, select speakers and adjust their ‘absolute’ output levels. (Refer to Adjusting the
speaker output levels on the previous page.)
! To adjust the speaker output levels in this
mode is the same as making the speaker output levels at SP LEVEL. Both provide the same
results.
04
4 Touch c or d to adjust the distance between the selected speaker and the listening position.
Each time you touch c or d increases or decreases the distance. 0.0 to 200.0in. is displayed as the distance is increased or
decreased.
5 Touch ESC to return to the playback display.
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
Equalizer curve
POWERFUL
Powerful
NATURAL
Natural
VOCAL
Vocal
FLAT
Flat
En
65
Section
04
Available accessories
Display
Equalizer curve
CUSTOM1
Custom 1
CUSTOM2
Custom 2
SUPER BASS
Super bass
! CUSTOM1 and CUSTOM2 are adjusted
equalizer curves.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
1 Press EQ and hold to switch to equalizer function.
Press EQ and hold until an equalizer curve
name appears in the display.
# To switch to SFC function, press EQ and hold
again.
2 Press EQ to select the equalizer.
Press EQ repeatedly to switch between the following equalizers:
POWERFUL—NATURAL—VOCAL—FLAT—
CUSTOM1—CUSTOM2—SUPER BASS
Adjusting 3-band parametric equalizer
For CUSTOM1 and CUSTOM2 equalizer
curves, you can adjust the front, rear and center equalizer curves separately by selecting a
center frequency, an equalizer level and a Q
factor for each band.
! A separate CUSTOM1 curve can be created for each source.
! A CUSTOM2 curve can be created common to all sources.
! The center speaker largely determines the
sound image and getting the balance right
isn’t easy. We recommend reproducing a 2ch. audio (a CD for example) and getting
the balance right among the speakers except for the center, and then reproducing a
5.1-ch. audio (Dolby Digital or DTS) and ad-
66
En
justing the center speaker output to the
balance you have already got among the
other speakers.
1 Touch NEXT twice on the DSP function
menu.
2
Touch PARA EQ.
3 Touch a or b to select the desired item.
Each time you touch a or b selects the item
in the following order:
SP-SEL (speakers)—BAND (bands)—
FREQUENCY (center frequency)—LEVEL
(equalizer level)—Q. FACTOR (Q factor)
4 Touch c or d to select the speaker to
be adjusted.
Touch c or d until the desired speaker appears in the display.
REAR (rear speakers)—CENTER (center speaker)—FRONT (front speakers)
# You cannot select speakers whose size is set
at OFF.
5 Touch b and then touch c or d to select the equalizer band to be adjusted.
Each time you touch c or d selects equalizer
bands in the following order:
LOW (low)—MID (mid)—HIGH (high)
6 Touch b and then touch c or d to select the center frequency of selected band.
Touch c or d until the desired frequency appears in the display.
40Hz—50Hz—63Hz—80Hz—100Hz—125Hz
—160Hz—200Hz—250Hz—315Hz—400Hz—
500Hz—630Hz—800Hz—1kHz—1.25kHz—
1.6kHz—2kHz—2.5kHz—3.15kHz—4kHz—
5kHz—6.3kHz—8kHz—10kHz—12.5kHz
Section
Available accessories
8 Touch b and then touch c or d to select the desired Q factor.
Each time you touch c or d switches between
the following Q factor:
NARROW (narrow)—WIDE (wide)
# You can adjust parameters for each band of
the other speakers in the same way.
Note
You can select a center frequency for each band.
You can change the center frequency in 1/3-octave steps, but you cannot select frequencies that
have intervals shorter than 1 octave among the
center frequencies of the three bands.
Using the auto-equalizer
The auto-equalizer is the equalizer curve created by auto TA and EQ (refer to Auto TA and
EQ (auto-time alignment and auto-equalizing)
on this page).
You can turn the auto-equalizer on or off.
1 Touch NEXT twice on the DSP function
menu.
2
Touch AUTO EQ.
# You cannot use this function if auto TA and
EQ has not been carried out.
3
Auto TA and EQ (auto-time
alignment and auto-equalizing)
The auto-time alignment is automatically adjusted for the distance between each speaker
and the listening position.
The auto-equalizer automatically measures
the car interior acoustic characteristics, and
then creates the auto-equalizer curve based
on that information.
WARNING
To prevent accidents, never carry out auto TA and
EQ while driving. When this function measures
the car interior acoustic characteristics to create
an auto-equalizer curve, a loud measurement
tone (noise) may be outputted from the speakers.
Available accessories
7 Touch b and then touch c or d to adjust the equalizer level.
Each time you touch c or d increases or decreases the equalizer level. +06 to –06 is displayed as the level is increased or decreased.
04
CAUTION
! Carrying out auto TA and EQ under the following conditions may damage the speakers. Be
sure to check the conditions thoroughly before carrying out auto TA and EQ.
— When speakers are incorrectly connected.
(e.g., When a rear speaker is connected to
a subwoofer output.)
— When a speaker is connected to a power
amp delivering output higher than the
speaker’s maximum input power capability.
! If the microphone is placed in an unsuitable
position the measurement tone may become
loud and measurement may take a long time,
resulting in a drain on battery power. Be sure
to place the microphone in the specified location.
Touch a to turn the auto-equalizer on.
# To turn auto-equalizer off, touch b.
En
67
Section
04
Available accessories
Before operating the auto TA and EQ
function
! Carry out auto TA and EQ in as quiet a
place as possible, with the car engine and
air conditioning switched off. Also cut
power to car phones or portable telephones
in the car, or remove them from the car before carrying out auto TA and EQ. Sounds
other than the measurement tone (surrounding sounds, engine sound, telephones ringing etc.) may prevent correct
measurement of the car interior acoustic
characteristics.
! Be sure to carry out auto TA and EQ using
the supplied microphone. Using another
microphone may prevent measurement, or
result in incorrect measurement of the car
interior acoustic characteristics.
! When front speaker is not connected, auto
TA and EQ cannot be carried out.
! When this unit is connected to a power
amp with input level control, auto TA and
EQ may not be possible if you lower power
amp input level. Set the power amp’s input
level to the standard position.
! When this unit is connected to a power
amp with an LPF, turn off the LPF on the
power amp before carrying out auto TA and
EQ. In addition, the cut-off frequency for
built-in LPF of an active subwoofer should
be set to the highest frequency.
! The time alignment value calculated by
auto TA and EQ may differ from the actual
distance in the following circumstances.
However, the distance has been calculated
by computer to be the optimum delay to
give accurate results for the circumstances, so please continue to use this
value.
— When the reflected sound within a vehicle is strong and delays occur.
— When delays occur for low sounds due
to the influence of the LPF on active
subwoofers or external amps.
68
En
! Auto TA and EQ changes the audio settings
as below:
— The fader/balance settings return to the
center position. (Refer to page 60.)
— The equalizer curve switches to FLAT.
(Refer to page 65.)
— It will be adjusted automatically to high
pass filter setting for front, center and
rear speaker.
! If you carry out auto TA and EQ when a previous setting of this already exists, the setting will be replaced.
Carrying out auto TA and EQ
1 Stop the car in a place that is as quiet
as possible, close all doors, windows and
the sun roof, and then turn the engine off.
If the engine is left running, engine noise may
prevent correct auto TA and EQ.
2 Fix the supplied microphone in the center of the headrest of the driver’s seat, facing forward, using the belt (sold
separately).
The auto TA and EQ may differ depending on
where you place the microphone. If desired,
place the microphone on the front passenger
seat to carry out auto TA and EQ.
3 Turn the ignition switch to ON or ACC.
If the car’s air conditioner or heater is turned
on, turn it off. Noise from the fan in the air
conditioner or heater may prevent correct auto
TA and EQ.
Section
Available accessories
# Press SOURCE to turn the source on if this
unit is turned off.
# If no position is selected before you start auto
TA and EQ, FRONT-L is selected automatically.
5 Press SOURCE and hold until the unit
turns off.
6 Press and hold EQ to enter the auto TA
and EQ measurement mode.
7 Plug the microphone into the microphone input jack on the multi-channel processor.
# To stop auto TA and EQ, touch STOP.
# To cancel auto TA and EQ part way through,
touch BACK or ESC.
10 When auto TA and EQ is completed,
Complete is displayed.
When correct measurement of car interior
acoustic characteristics is not possible, an
error message is displayed. (Refer to Understanding auto TA and EQ error messages on
page 72.)
11 Touch ESC to cancel the auto TA and EQ
mode.
Available accessories
4 Select the position for the seat on
which the microphone is placed.
Refer to Using the position selector on page
59.
04
12 Store the microphone carefully in the
glove compartment.
Store the microphone carefully in the glove
compartment or any other safe place. If the
microphone is subjected to direct sunlight for
an extended period, high temperatures may
cause distortion, color change or malfunction.
For details concerning operation, refer to the
multi-channel processor’s operation manual.
8 Touch START to start the auto TA and
EQ.
9 Get out of the car and close the door
within 10 seconds when the 10-second
count-down starts.
The measurement tone (noise) is outputted
from the speakers, and auto TA and EQ begins.
# When all speakers are connected, auto TA
and EQ is completed in about nine minutes.
En
69
Appendix
Additional Information
Troubleshooting
Common
Symptom
Cause
Action (See)
Power doesn’t turn on.
The unit doesn’t operate.
Leads and connectors are incorrectly connected.
Confirm once more that all connections are
correct.
The fuse is blown.
Rectify the reason for the fuse blowing, then
replace the fuse. Be very sure to install the
correct fuse with the same rating.
Noise and other factors are causing Press RESET. (Page 10)
the built-in microprocessor to operate incorrectly.
Playback is not possible.
The disc is dirty.
Clean disc. (Page 74)
The loaded disc is a type this unit
cannot play.
Check what type the disc is.
Non compatible video system disc
is loaded.
Change to a disc compatible to your video
system.
No sounds are heard.
The volume level will not rise.
Cables are not connected correctly.
Connect the cables correctly.
There is no picture.
The parking brake cord is not connected.
Connect a parking brake cord, and apply the
parking brake.
The parking brake is not applied.
Connect a parking brake cord, and apply the
parking brake.
The unit is performing still, slow mo- There is no sound during still, slow motion or
tion or frame-by-frame playback.
frame-by-frame playback.
is displayed, and op- The operation is prohibited for the
The icon
eration is not possible.
disc.
The operation is not compatible
with the disc’s organization.
70
This operation is not possible.
This operation is not possible.
The picture stops (pauses) and
the unit cannot be operated.
Reading of data has become impos- After pressing g once, start playback once
sible during playback.
more.
There is no sound.
Volume level is low.
The volume level is low.
The attenuator is on.
Turn the attenuator off.
There is audio and video skipping.
The unit is not firmly secured.
Secure the unit firmly.
The picture is stretched, the aspect is incorrect.
The aspect setting is incorrect for
the display.
Select the appropriate setting for your display.
(Page 36)
When the ignition switch is
turned ON (or turned to ACC),
the motor sounds.
The unit is confirming whether a
disc is loaded or not.
This is a normal operation.
Nothing is displayed.
The touch panel keys cannot be
used.
The rear view camera is not connected.
B-CAM is at incorrect setting.
Connect a rear view camera.
Press V.ADJ to return to the source display
and then select the correct setting for BCAM. (Page 41)
En
Adjust the volume level.
Appendix
Additional Information
Problems during DVD playback
Cause
Action (See)
The loaded disc has a different region number from this unit.
Replace the disc with one featuring the same
region number as this unit. (Page 6, Page 81)
A parental lock message is displayed and playback is not possible.
Parental lock is on.
Turn parental lock off or change the level.
(Page 37)
Parental lock cannot be canceled.
The code number is incorrect.
Input the correct code number. (Page 37)
You have forgotten your code number.
Press CLEAR 10 times to cancel the code
number. (Page 38)
Dialog language (and subtitle
language) cannot be switched.
The DVD playing does not feature
multiple language recordings.
You cannot switch among multiple languages
if they are not recorded on the disc.
You can only switch between items
indicated in the disc menu.
Switch using the disc menu.
The DVD playing does not feature
subtitles.
Subtitles are not displayed if they are not recorded on the disc.
You can only switch between items
indicated in the disc menu.
Switch using the disc menu.
No subtitles are displayed.
Playback is not with the audio
The DVD playing does not feature
language and subtitle language dialog or subtitles in the language
settings selected in DVD SETUP. selected in DVD SETUP.
Switching to a selected language is not possible if the language selected in DVD SETUP is
not recorded on the disc.
Switching the viewing angle is
not possible.
The DVD playing does not feature
scenes shot from multiple angles.
You cannot switch between multiple angles if
the DVD does not feature scenes recorded
from multiple angles.
You are trying to switch to multiple
angle viewing of a scene that is not
recorded from multiple angles.
Switch between multiple angles when watching scenes recorded from multiple angles.
Additional Information
Symptom
Playback is not possible.
The picture is extremely unclear/ The disc features a signal to prohibit Since this unit is compatible with the copy
distorted and dark during play- copying. (Some discs may have
guard analog copy protect system, when playback.
this.)
ing a disc that has a signal prohibiting copying, the picture may suffer from horizontal
stripes or other imperfections when viewed
on some displays. This does not mean this
unit is malfunctioning.
Problems during Video CD playback
Symptom
Cause
Action (See)
The PBC (playback control)
menu display cannot be called
up.
The Video CD playing does not feature PBC.
This operation is not possible with Video CDs
not featuring PBC.
Repeat play and track/time
search are not possible.
The Video CD playing features PBC. This operation is not possible with Video CDs
featuring PBC.
En
71
Appendix
Additional Information
Error messages
When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error
message.
Message
Cause
Action (See)
ERROR-02
Dirty disc
Clean disc.
Scratched disc
Replace disc.
ERROR-05
Electrical or mechanical
Press RESET.
DIFFERENT REGION DISC (REGION ERR)
The disc does not have the same re- Replace the DVD video with one bearing the
gion number as this unit
correct region number.
NON PLAYABLE DISC (NONPLAY)
This type of disc cannot be played
by this unit
Replace the disc with one this unit can play.
The disc is loaded upside down
Check that the disc is loaded correctly.
THERMAL PROTECTION IN
MOTION (TEMP)
The temperature of this unit is outside the normal operating range
Wait until the unit’s temperature returns to
within normal operating limits.
PROTECT
All the files on the inserted disc are
secured by digital rights management (DRM)
Replace disc.
TRK SKIPPED
The inserted disc contains WMA
files that are protected by digital
rights management (DRM)
Replace disc.
Understanding auto TA and EQ error messages
When correct measurement of car interior acoustic characteristics is not possible using the auto
TA and EQ, an error message may appear on the display. If an error message appears, refer to the
table below to see what the problem is and the suggested method of correcting the problem. After
checking, try again.
72
Message
Cause
Action
Error check MIC
Microphone is not connected.
Plug the supplied microphone securely into
the jack.
Error check front SP, Error
check FL SP, Error check FR SP,
Error check center SP, Error
check RL SP, Error check RR SP,
Error check subwoofer
The microphone cannot pick up the ! Confirm that the speakers are connected
measuring tone of a speaker.
correctly.
! Correct the input level setting of the power
amp connected to the speakers.
! Set the microphone correctly.
Error check noise
The surrounding noise level is too
high.
En
! Stop your car in a place that is as quiet as
possible, and switch off the engine, air conditioner or heater.
! Set the microphone correctly.
Appendix
Additional Information
Understanding messages
Translation
VIDEO VIEWING IS NOT AVAILABLE
WHILE DRIVING
Video viewing is not available when driving.
YOU CANNOT USE THIS FUNCTION
WHILE DRIVING
You cannot use this function while driving.
Please source unit off Hold EQ button 2
sec, Set Auto EQ&TA
Please source unit off. Hold EQ button two seconds. Set Auto
EQ&TA.
Can`t adjust Time Alignment. Set Position
FL or FR
Can’t adjust Time Alignment. Set Position FL or FR.
Press track list to play and title will appear
Press track list to play and title will appear.
Additional Information
Messages
En
73
Appendix
Additional Information
Handling guideline of discs
and player
! Use only conventional, fully circular discs.
Do not use shaped discs.
! Do not use cracked, chipped, warped, or
otherwise damaged discs as they may damage the player.
! Do not touch the recorded surface of the
discs.
! Store discs in their cases when not in use.
! Avoid leaving discs in excessively hot environments including under direct sunlight.
! Do not attach labels, write on or apply chemicals to the surface of the discs.
! To clean a disc, wipe the disc with a soft
cloth outward from the center.
! Condensation may temporarily impair the
player’s performance. Leave it to adjust to
the warmer temperature for about one
hour. Also, wipe any dump discs with a soft
cloth.
! Road shocks may interrupt disc playback.
! Read the precautions with discs before
using them.
DVD discs
! With some DVD video discs, it may not be
possible to use certain functions.
! It may not be possible to play back some
DVD video discs.
! When DVD-R/DVD-RW discs are used,
playback is possible only for discs which
have been finalized.
! When DVD-R/DVD-RW discs are used,
playback is possible only for discs which
have been recorded with the Video format
74
En
(video mode). It is not possible to play back
DVD-RW discs which have been recorded
with the Video Recording format (VR
mode).
! It may not be possible to play back DVD-R/
DVD-RW discs which have been recorded
with the Video format (video mode), because of disc characteristics, scratches or
dirt on the disc, or dirt, condensation, etc.
on the lens of this unit.
! It is not possible to play back DVD-ROM/
DVD-RAM discs.
! Playback of discs may not be possible because of disc characteristics, disc format,
recorded application, playback environment, storage conditions and so on.
CD-R/CD-RW discs
! When CD-R/CD-RW discs are used, playback is possible only for discs which have
been finalized.
! It may not be possible to play back CD-R/
CD-RW discs recorded on a music CD recorder or a personal computer because of
disc characteristics, scratches or dirt on
the disc, or dirt, condensation, etc., on the
lens of this unit.
! Playback of discs recorded on a personal
computer may not be possible, depending
on the application settings and the environment. Please record with the correct format. (For details, contact the manufacturer
of the application.)
! Playback of CD-R/CD-RW discs may become impossible in case of direct exposure
to sunlight, high temperatures, or the storage conditions in the vehicle.
! Titles and other text information recorded
on a CD-R/CD-RW disc may not be displayed by this unit (in the case of audio
data (CD-DA)).
Appendix
Additional Information
Dual Discs
! Dual Discs are two-sided discs that have a
recordable CD for audio on one side and a
recordable DVD for video on the other.
! Playback of the DVD side is possible with
this unit. However, since the CD side of
Dual Discs is not physically compatible
with the general CD standard, it may not be
possible to play the CD side with this unit.
! Frequent loading and ejecting of a Dual
Disc may result in scratches on the disc.
Serious scratches can lead to playback problems on this unit. In some cases, a Dual
Disc may become stuck in the disc loading
slot and will not eject. To prevent this, we
recommend you refrain from using Dual
Disc with this unit.
! Please refer to the information from the
disc manufacturer for more detailed information about Dual Discs.
! There may be a slight delay when starting
playback of audio files encoded with image
data.
! ISO 9660 Level 1 and 2 compliant. Romeo
and Joliet file systems are both compatible
with this player.
! Multi-session playback is possible.
! Compressed audio files are not compatible
with packet write data transfer.
! Only 64 characters from the beginning can
be displayed as a file name (including the
extension such as .wma or .mp3) or a folder
name.
! Folder selection sequence or other operation may be altered depending on the encoding or writing software.
! Regardless of the length of blank section
between the songs of original recording,
compressed audio discs will play with a
short pause between songs.
! File extensions such as .wma or .mp3 must
be used properly.
Additional Information
! This unit conforms to the track skip function of the CD-R/CD-RW disc. The tracks
containing the track skip information are
skipped automatically (in case of audio
data (CD-DA)).
! If you insert a CD-RW disc into this unit,
time to playback will be longer than when
you insert a conventional CD or CD-R disc.
! Read the precautions with CD-R/CD-RW
discs before using them.
Compressed audio files on
the disc
! Depending on the version of Windows
Media Player used to encode WMA files,
album names and other text information
may not be correctly displayed.
En
75
Appendix
Additional Information
Example of a hierarchy
Using the display correctly
: Folder
: Compressed audio file
CAUTION
1
2
3
4
5
6
Level 1
Level 2
Level 3
Level 4
! This unit assigns folder numbers. The user
cannot assign folder numbers.
! Folder hierarchy is allowed up to eight tiers.
However, practical hierarchy of folder is
less than two tiers.
! It is possible to play back up to 253 items
from folders on one disc.
! If liquid or foreign matter should get inside
this unit, turn off the power immediately and
consult your dealer or the nearest authorized
PIONEER Service Station. Do not use the unit
in this condition because doing so may result
in a fire, electric shock, or other failure.
! If you notice smoke, a strange noise or smell,
or any other abnormal signs from the display,
turn off the power immediately and consult
your dealer or the nearest authorized
PIONEER Service Station. Using this unit in
this condition may result in permanent damage to the system.
! Do not disassemble or modify this unit, as
there are high-voltage components inside
which may cause an electric shock. Be sure
to consult your dealer or the nearest authorized PIONEER Service Station for internal inspection, adjustments or repairs.
Handling the display
Compressed audio compatibility
WMA
! Compatible format: WMA encoded by
Windows Media Player Ver. 7, 7.1, 8, 9 or 10
! Bit rate: 48 kbps to 320 kbps (CBR)
! VBR: No
! Sampling frequency: 32 kHz to 48 kHz
! Windows Media Audio 9 Professional, Lossless, Voice: No
MP3
! Bit rate: 8 kbps to 320 kbps
! Sampling frequency: 16 kHz to 48 kHz (32,
44.1, 48 kHz for emphasis)
! Compatible ID3 tag version: 1.0, 1.1, 2.2,
2.3, 2.4 (ID3 tag Version 2.x is given priority
than Version 1.x.)
! M3u playlist: No
! MP3i (MP3 interactive), mp3 PRO: No
76
En
! When the display is subjected to direct sunlight for a long period of time, it will become very hot resulting in possible
damage to the LCD screen. When not
using this unit, close the display and avoid
exposing it to direct sunlight.
! The display should be used within the temperature ranges shown below.
Storage temperature range: -4 °F to 176 °F
At temperatures higher or lower than the
operating temperature range the display
may not operate normally.
! The LCD screen of this unit is exposed in
order to increase its visibility within the vehicle. Please do not press strongly on it as
this may damage it.
Appendix
Additional Information
Liquid crystal display (LCD) screen
! If the display is near the vent of an air conditioner when it is opened, make sure that
air from the air conditioner is not blowing
on it. Heat from the heater may damage
the LCD screen, and cool air from the cooler may cause moisture to form inside the
display resulting in possible damage. Also,
if the display is cooled down by the cooler,
the screen may become dark, or the life
span of the small fluorescent tube used inside the display may be shortened.
! Small black dots or white dots (bright dots)
may appear on the LCD screen. These are
due to the characteristics of the LCD
screen and do not indicate a problem with
the display.
! At low temperatures, the LCD screen may
be dark for a while after the power is turned
on.
! The LCD screen will be difficult to see if it is
exposed to direct sunlight.
! When using a portable phone, keep the antenna of the portable phone away from the
display to prevent disruption of the video by
the appearance of spots, colored stripes,
etc.
Keeping the display in good
condition
! When wiping the screen, take care not to
scratch the surface. Do not use harsh or
abrasive chemical cleaners.
Small fluorescent tube
! A small fluorescent tube is used inside the
display to illuminate the LCD screen.
— The fluorescent tube should last for approximately 10 000 hours, depending on
operating conditions. (Using the display
at low temperatures reduces the service
life of the fluorescent tube.)
— When the fluorescent tube reaches the
end of its useful life, the screen will be
dark and the image will no longer be
projected. If this happens, consult your
dealer or the nearest authorized
PIONEER Service Station.
En
Additional Information
! Do not place anything on the display when
it is opened. Also, do not attempt to carry
out angle adjustment, or open/close the
display by hand. Applying strong force to
the display may damage it.
! Do not push the LCD screen with much
force as this may scratch it.
! Be careful not to place anything between
the display and the main body when the
display is opening or closing. If an object
gets between the display and main body,
the display may stop working.
! Be careful of fingers, long hair, and loose
articles of clothing which could possibly
get caught between the display and the
main body and cause serious injury.
77
Appendix
Additional Information
Language code chart for DVD
Language (code), input code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
Spanish (es), 0519
German (de), 0405
Italian (it), 0920
Chinese (zh), 2608
Dutch (nl), 1412
Portuguese (pt), 1620
Swedish (sv), 1922
Russian (ru), 1821
Korean (ko), 1115
Greek (el), 0512
Afar (aa), 0101
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Welsh (cy), 0325
Danish (da), 0401
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
78
En
Language (code), input code
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Kirghiz (ky), 1125
Latin (la), 1201
Lingala (ln), 1214
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Nepali (ne), 1405
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Language (code), input code
Pashto, Pushto (ps), 1619
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Sinhalese (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swahili (sw), 1923
Tamil (ta), 2001
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Twi (tw), 2023
Ukrainian (uk), 2111
Urdu (ur), 2118
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Appendix
Additional Information
Terms
Bit rate
This expresses data volume per second, or bps
(bits per second) units. The higher the rate,
the more information is available to reproduce
the sound. Using the same encoding method
(such as MP3), the higher the rate, the better
the sound.
Chapter
DVD titles are in turn divided into chapters
which are numbered in the same way as the
chapters of a book. With DVD video discs featuring chapters, you can quickly find a desired
scene with chapter search.
Dolby Digital
Dolby Digital provides multi-channel audio
from up to 5.1 independent channels. This is
the same as the Dolby Digital surround sound
system used in theaters.
Dolby Pro Logic II
Dolby Pro Logic II can create five full-bandwidth output channels from two-channel
sources. This new technology enables a discrete 5-channel playback with 2 front channels, 1 center channel, and 2 rear channels. A
music mode is also available for 2-channel
sources in addition to the movie mode.
ID3 tag
This is a method of embedding track-related
information in an MP3 file. This embedded information can include the track title, the artist’s name, the album title, the music genre,
the year of production, comments and other
data. The contents can be freely edited using
software with ID3 Tag editing functions.
Although the tags are restricted as to the number of characters, the information can be
viewed when the track is played back.
Additional Information
Aspect ratio
This is the width-to-height ratio of a TV screen.
A regular display has an aspect ratio of 4:3.
Wide screen displays have an aspect ratio of
16:9, providing a bigger picture for exceptional
presence and atmosphere.
DTS
This stands for Digital Theater Systems. DTS is
a surround system delivering multi-channel
audio from up to 6 independent channels.
ISO9660 format
This is the international standard for the format logic of CD-ROM folders and files. For the
ISO9660 format, there are regulations for the
following two levels.
Level 1:
The file name is in 8.3 format (the name consists of up to 8 characters, half-byte English
capital letters and half-byte numerals and the
“_” sign, with a file-extension of three characters).
Level 2:
The file name can have up to 31 characters (including the separation mark “.” and a file extension). Each folder contains less than 8
hierarchies.
Extended formats
Joliet:
File names can have up to 64 characters.
Romeo:
File names can have up to 128 characters.
En
79
Appendix
Additional Information
Linear PCM (LPCM)/Pulse code
modulation
This stands for linear pulse code modulation,
which is the signal recording system used for
music CDs and DVDs. Generally, DVDs are recorded with higher sampling frequency and
bit rate than CDs. Therefore, DVDs can provide
higher sound quality.
m3u
Playlists created using the “WINAMP” software have a playlist file extension (.m3u).
MP3
MP3 is short for MPEG Audio Layer 3. It is an
audio compression standard set by a working
group (MPEG) of the ISO (International Standards Organization). MP3 is able to compress
audio data to about 1/10th the level of a conventional disc.
MPEG
This stands for Moving Pictures Experts
Group, and is an international video image
compression standard. Some DVDs feature digital audio compressed and recorded using
this system.
Multi-angle
With regular TV programs, although multiple
cameras are used to simultaneously shoot
scenes, only images from one camera at a
time are transmitted to your TV. Some DVDs
feature scenes shot from multiple angles, letting you choose your viewing angle as desired.
Multi-audio (Multilingual dialog)
Some DVDs feature dialog recorded in multiple languages. Dialog in up to 8 languages
can be recorded on a single disc, letting you
choose as desired.
Multi-session
Multi-session is a recording method that allows additional data to be recorded later.
80
En
When recording data on a CD-ROM, CD-R or
CD-RW, etc., all data from beginning to end is
treated as a single unit or session. Multi-session is a method of recording more than 2 sessions on one disc.
Multi-subtitle
Subtitles in up to 32 languages can be recorded on a single DVD, letting you choose as
desired.
Optical digital output/input
By transmitting and receiving audio signals in
a digital signal format, the chance of sonic
quality deteriorating in the course of transmission is minimized. An optical digital output/
input is designed to transmit and receive digital signals optically.
Packet write
This is a general term for a method of writing
on CD-R, etc., at the time required for a file,
just as is done with files on floppy or hard
discs.
Parental lock
Some DVD video discs with violent or adult-oriented scenes feature parental lock which prevents children from viewing such scenes. With
this kind of disc, if you set the unit’s parental
lock level, playback of scenes inappropriate for
children will be disabled, or these scenes will
be skipped.
Playback control (PBC)
This is a playback control signal recorded on
Video CDs (Version 2.0). Using menu displays
provided by Video CDs with PBC lets you enjoy
playback of simple interactive software and
software with search functions. You can also
enjoy viewing high- and standard-resolution
still images.
Appendix
Additional Information
Region number
DVD players and DVD discs feature region
numbers indicating the area in which they
were purchased. Playback of a DVD is not possible unless it features the same region number as the DVD player. This unit’s region
number is displayed on the bottom of the unit.
Additional Information
Title
DVD video discs have high data capacity, enabling recording of multiple movies on a single disc. If, for example, one disc contains
three separate movies, they are divided into
title 1, title 2 and title 3. This lets you enjoy the
convenience of title search and other functions.
VBR
VBR is short for variable bit rate. Generally
speaking CBR (constant bit rate) is more
widely used. But by flexibly adjusting the bit
rate according to the needs of audio compression, it is possible to achieve compressionpriority sound quality.
WMA
WMA is short for Windows Media™ Audio
and refers to an audio compression technology that is developed by Microsoft
Corporation. WMA data can be encoded by
using Windows Media Player version 7 or
later.
Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
En
81
Appendix
Additional Information
Specifications
General
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Max. current consumption
..................................................... 10.0 A
Dimensions (W × H × D):
DIN
Chassis ............................... 178 × 50 × 160 mm
(7 × 2 × 6/1/4 in.)
Nose ..................................... 188 × 58 × 30 mm
(7-3/8 × 2-1/4 × 1-1/8 in.)
D
Chassis ............................... 178 × 50 × 165 mm
(7 × 2 × 6-1/2 in.)
Nose ..................................... 170 × 46 × 25 mm
(6-3/4 × 1-3/4 × 1 in.)
Weight .......................................... 2.3 kg (5.1 lbs)
Display
Screen size/aspect ratio ....... 6.5 inch wide/16:9
(effective display area: 144
× 77 mm)
Pixels ............................................. 336 960 (1 440 × 234)
Type ................................................ TFT active matrix, transmissive type
Color system .............................. NTSC compatible
Storage temperature range
..................................................... -4 °F to 176 °F
Angle adjustment .................... 50° to 110°
(initial settings: 110°)
Audio
Maximum power output ....... 50 W × 4
50 W × 2/4 W + 70 W × 1/2
W (for subwoofer)
Continuous power output ... 22 W × 4 (50 Hz to 15 000
Hz, 5% THD, 4 W load, both
channels driven)
Load impedance ...................... 4 W to 8 W × 4
4 W to 8 W × 2 + 2 W × 1
Preout max output level/output impedance
..................................................... 2.2 V/1kW
Equalizer (3-Band Parametric Equalizer):
Low
Frequency ................ 40/80/100/160 Hz
Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................ ±12 dB
82
En
Mid
Frequency ................ 200/500/1k/2k Hz
Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................ ±12 dB
High
Frequency ................ 3.15k/8k/10k/12.5k Hz
Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................ ±12 dB
Loudness contour:
Low ....................................... +3.5 dB (100 Hz), +3 dB (10
kHz)
Mid ....................................... +10 dB (100 Hz), +6.5 dB
(10 kHz)
High ..................................... +11 dB (100 Hz), +11 dB
(10 kHz)
(volume: –30 dB)
Tone controls:
Bass
Frequency ................ 40/63/100/160 Hz
Gain ............................ ±12 dB
Treble
Frequency ................ 2.5k/4k/6.3k/10k Hz
Gain ............................ ±12 dB
HPF:
Frequency .......................... 50/80/125 Hz
Slope .................................... –12 dB/oct
Subwoofer:
Frequency .......................... 50/80/125 Hz
Slope .................................... –18 dB/oct
Gain ...................................... ±12 dB
Phase .................................. Normal/Reverse
DVD Player
System .......................................... DVD video, Video CD, Compact disc audio system
Usable discs .............................. DVD video, Video CD, CD,
CD-ROM (WMA, MP3)
Region number ........................ 1
Signal format:
Sampling frequency ..... 44.1/48/96 kHz
Number of quantization bits
........................................... 16/20/24; linear
Frequency response ............... 5 Hz to 44 000 Hz (with DVD,
at sampling frequency 96
kHz)
Signal-to-noise ratio ............... 97 dB (1 kHz) (IHF-A network)
(CD: 96 dB (1 kHz) (IHF-A
network))
Appendix
Additional Information
Additional Information
Dynamic range ......................... 95 dB (1 kHz)
(CD: 94 dB (1 kHz))
Distortion ..................................... 0.008 % (1 kHz)
Output level:
Video .................................... 1.0 Vp-p/75 W (±0.2 V)
Audio ................................... 1.0 V (1 kHz, 0 dB)
Number of channels .............. 2 (stereo)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7 & 8
FM tuner
Frequency range ...................... 87.9 MHz to 107.9 MHz
Usable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,
S/N: 30 dB)
Signal-to-noise ratio ............... 75 dB (IHF-A network)
Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 % (at 65 dBf, 1 kHz,
mono)
Frequency response ............... 30 Hz to 15 000 Hz (±3 dB)
Stereo separation .................... 45 dB (at 65 dBf, 1 kHz)
AM tuner
Frequency range ...................... 530 kHz to 1 710 kHz (10
kHz)
Usable sensitivity ..................... 18 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 65 dB (IHF-A network)
Note
Specifications and the design are subject to possible modifications without notice due to improvements.
En
83
Index
A
Angle icon ..................................................24,.36
Aspect ratio ...............................................36,.79
Audio language .........................................23,.35
B
Bookmark .........................................................28
Brightness ........................................................17
C
Chapter .............................................................79
Code number ...................................................37
Color .................................................................17
Contrast ............................................................17
D
Direct search ...................................................22
DTS ...............................................................8,.79
H
Hue ...................................................................17
L
Language code chart .....................................78
Linear PCM (LPCM) ........................................80
M
Menu language ...............................................36
MPEG ................................................................80
Multi-angle .................................................24,.80
Multi-audio .................................................23,.80
Multi-subtitle ..............................................23,.80
O
Optical digital output/input ...........................80
P
Parental lock ..............................................37,.80
PBC (playback control) ..................................20
Playback control (PBC) ..................................80
R
Region number ...........................................6,.81
84
En
S
Subtitle language ......................................23,.35
T
Title ...................................................................81
TV aspect ..........................................................36
V
Video CD ............................................................6
W
Wide screen mode ..........................................16
PIONEER CORPORATION
4-1, MEGURO 1-CHOME, MEGURO-KU
TOKYO 153-8654, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
TEL: 1-877-283-5901
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
先鋒股份有限公司
總公司 : 台北市中山北路二段44號13樓
電話 : (02) 2521-3588
先鋒電子(香港)有限公司
香港九龍尖沙咀海港城世界商業中心
9樓901-6室
電話 : (0852) 2848-6488
Published by Pioneer Corporation.
Copyright © 2007 by Pioneer Corporation.
All rights reserved.
Printed in Japan
<KSNZF> <07A00000>
<CRB2343-A> UC
Download PDF

advertising