Specifications | FujiFilm 16309393-3-KIT Digital Camera User Manual

Fujitsu F9600 Telephone System
LinkPlus Interface Guide
SpectraLink 6000 System
SpectraLink 8000 System
June 2008 Edition
Version E
LinkPlus Interface Guide: Fujitsu F9600 Telephone System
Trademark Information
Polycom® and the logo designs
Are trademarks and registered trademarks of
Polycom, Inc. in the United States of America
and various countries. All other trademarks
used herein are the property of their respective
Polycom, Inc. has prepared this document for
use by Polycom personnel and customers. The
drawings and specifications contained herein
are the property of Polycom and shall be neither
reproduced in whole or in part without the prior
written approval of Polycom, nor be implied to
grant any license to make, use, or sell equipment
manufactured in accordance herewith.
Patent Information
The accompanying product is protected by one
or more US and foreign patents and/or pending
patent applications held by Polycom, Inc.
Copyright Notice
Copyright © 1998 to 2008 Polycom, Inc.
All rights reserved under the International and
pan-American copyright Conventions.
No part of this manual, or the software
described herein, may be reproduced or
transmitted in any form or by any means, or
translated into another language or format, in
whole or in part, without the express written
permission of Polycom, Inc.
Do not remove (or allow any third party to
remove) any product identification, copyright or
other notices.
Polycom reserves the right to make changes in
specifications and other information contained
in this document without prior notice, and the
reader should in all cases consult Polycom to
determine whether any such changes have been
No representation or other affirmation of fact
contained in this document including but not
limited to statements regarding capacity,
response-time performance, suitability for use,
or performance of products described herein
shall be deemed to be a warranty by Polycom
for any purpose, or give rise to any liability of
Polycom whatsoever.
Contact Information
Please contact your Polycom Authorized
Reseller for assistance.
Polycom, Inc.
4750 Willow Road,
Pleasanton, CA 94588
Every effort has been made to ensure that the
information in this document is accurate.
Polycom, Inc. is not responsible for printing or
clerical errors. Information in this document is
subject to change without notice and does not
represent a commitment on the part of Polycom,
PN: 1725-36134-001_E.doc
About this Guide
Polycom is the market leader in multi-cellular wireless telephone
systems for the workplace. We manufacture a range of products to
suit any size installation. All Polycom products use our LinkPlus
digital integration technology to integrate with various digital switch
platforms. Using LinkPlus technology, Wireless Telephones
(handsets) emulate digital telephone sets to deliver advanced
capabilities such as multiple line appearances and LCD display
features. This document explains the programming or administration
required to use the host digital switch with the following Polycom
SpectraLink 6000 System – SpectraLink 6300 MCU
The SpectraLink 6300 MCU supports up to 3,200 handsets and up to
1,000 Base Stations. Up to 25 shelves can be interconnected for
maximum system capacity.
SpectraLink 6000 System – SpectraLink 6100 MCU
Designed for smaller installations supporting up to 64 handsets and
up to 16 Base Stations. Up to four MCU controllers can be
interconnected for maximum system capacity.
SpectraLink 8000 Telephony Gateway
The SpectraLink 8000 Telephony Gateway is a wireless telephony
product that provides high quality packetized voice communications
using the Internet Protocol (IP).
Different models of SpectraLink Wireless Telephones vary in
functional capabilities. This document covers the basic operational
features of all handsets. However, certain handset or PBX features
may not be supported by your emulation.
PN: 1725-36134-001_E.doc
LinkPlus Interface Guide: Fujitsu F9600 Telephone System
Related Documents
SpectraLink 6300 MCU : Operator’s Console (1725-36125-001)
SpectraLink 6100 MCU: Installation and Operation (1725-36097-001)
SpectraLink 6020 Wireless Telephone and Accessories User Guide
Available at
SpectraLink 8000 Telephony Gateway: Administration Guide for SRP
SpectraLink 8020/8030 Wireless Telephone and Accessories User Guide
SpectraLink e340/h340/i640 Wireless Telephone: Configuration and
Administration (SRP) (72-1065-09)
Available at
Telephone Switch Interface Matrix (1725-36128-001)
Available at
Customer Support
Polycom wants you to have a successful installation. If you have
questions please contact the Customer Support Hotline at
(800) 775-5330. The hotline is open Monday through Friday,
6 a.m. to 6 p.m. Mountain time.
For Technical Support: technicalsupport@polycom.com
For Knowledge Base:
PN: 1725-36134-001_E.doc
About this Guide
Icons and Conventions
This manual uses the following icons and conventions.
Caution! Follow these instructions carefully to avoid danger.
Note these instructions carefully.
PN: 1725-36134-001_E.doc
This typeface indicates a key, label, or button on SpectraLink
Plan the Interface
The system administrator programs the telephone system for use with
the handset System using the normal administration terminal or
procedures. Programming can be done after the handsets are
Recommended programming includes assigning extension numbers
to the handsets and programming features on the telephone system so
they are easily accessible from the handsets.
For analog interfaces, macro codes are in the document relating to
configuring the system. See SpectraLink 6300 MCU: Operator’s Console,
SpectraLink 6100 MCU: Installation and Operation, or SpectraLink 8000
Telephony Gateway: Administration Guide for SRP.
The following information will help the system administrator set up
the SpectraLink Wireless Telephones to operate in a way that feels
familiar and comfortable to users.
Plan Programming
Digital Interface programming for the Wireless Telephone System will
be faster if it is planned in advance by verifying the parameters and
features on the current telephone system and wired phones. The
system administrator must assign extension numbers to the handsets
and plan the functions (trunk access, toll restrictions, system features,
ringing options etc.) to be programmed for the handsets.
One of these scenarios concerning how the handsets are programmed
should apply to this site:
PN: 1725-36134-001_E.doc
All handsets are programmed alike: All handsets will be
programmed exactly the same. Depending on the capabilities of
the switch, the system administrator can often program one
handset and use it as a model for all other handsets.
Groups of handsets are programmed alike: Handsets are grouped
into classes that are programmed alike. Depending on the
capabilities of the switch, the system administrator can program
LinkPlus Interface Guide: Fujitsu F9600 Telephone System
“model” handsets then use the model as a template to program
the other handsets.
All handsets are different: All handsets are programmed
differently, so each handset will be programmed individually.
Before installation, the parameters of the wired phones should be
verified to plan the parameters required for the handsets.
Directory number and equipment number
The handset supports a total of nine line resources. Which lines
should ring at this handset and which lines will be selected when the
user goes off-hook?
Station name
What name is associated with this extension?
Toll restrictions
Should any special restrictions be assigned for incoming or outgoing
Programmable buttons
Determine which features, if any, should be programmed on the
SpectraLink Wireless Telephones. These assignments may emulate
assignments on the users’ wired set. Use the key-map diagram for
If Autodial is to be used on the handsets, one of the programmable
key sequences on the handsets must be used for Program Mode.
If possible, identify a wired set that is programmed exactly or close to
the way the handsets should be programmed. This set can be used to
copy the programming to the new handsets.
Assign Extension Numbers
The wire contractor should inform the system administrator which
port numbers have been designated for the handsets.
PN: 1725-36134-001_E.doc
Plan the Interface
The system administrator may use the Extension Assignments
Worksheet at the end of this document to track the port numbers,
extensions, users, and features assigned to handsets.
The Wireless Telephone Display
The SpectraLink Wireless Telephone will display the telephone
number as it is dialed.
The DT14DS has a two-line by 20-character display. The handset
display is 2 lines by 16 characters; therefore, some F9600 messages
may be truncated when displayed on the handset.
Certain characters may be used by the system that are not
implemented in the handset. Flashing characters are not implemented
on the handset, nor is rolling or scrolling of text.
Although some desksets do not have a display, any display
information sent by the system will be displayed on the handset.
Handset indicators
Line indicators are associated with line access keys. Status indicators
or icons are associated with voicemail, low battery function, other
functions, and service interruption. A left or right arrow is displayed
when the screen can be toggled either left or right to display more
When lines are programmed as shown on the key-map diagrams, the
numeral icons on the handset display will be mapped to any deskset
LEDs associated with the corresponding feature keys. The line icons
will be displayed as follows:
PN: 1725-36134-001_E.doc
Line State
Handset Line Status Icon State
Fast flash
On hold
Slow flash
LinkPlus Interface Guide: Fujitsu F9600 Telephone System
Feature Programming Requirements
When planning the interface, the following information must be taken
into account:
Line sequences
The handset uses two types of key sequences to access PBX features
and multiple lines. LINE sequences are those where the user presses
the LINE key and then a number key. The key-map design designates
“line” keys that should be programmed for line appearance so that
they correspond to line sequences on the handset.
The LINE icon on the handset will reflect activity on the corresponding
deskset key. For this reason, it is recommended that line appearance
keys be used only for line access. If only one line is assigned to a
particular handset, leave the other designated line keys identified on
the key maps unassigned. The corresponding handset LINE + key
sequences will then have no function.
FAB00 (LINE +1) cannot be programmed since it is reserved for the
prime-line appearance.
Function sequences
Function sequences are those where the handset user presses the FCN
key and then a number key. Designated “function” deskset keys
programmed to system features such as Transfer and Conference may
have their corresponding menu items display on the handset function
menu. See the key-map diagram for the function keys that are
available for feature programming.
Function Menu Programming
SpectraLink 6300 MCU
The function menu text defaults for the handsets associated with the
SpectraLink 6300 MCU can be changed via the SpectraLink Operator’s
PN: 1725-36134-001_E.doc
Plan the Interface
SpectraLink 6100 MCU
For the SpectraLink 6100 MCU, the handset function menu text can
only be changed via remote configuration through the services of
Polycom’s Customer Support.
SpectraLink 8000 Telephony Gateways
Function menu text options can be changed in the Administration
Console of the SpectraLink 8000 Telephony Gateways.
The Hold feature should be programmed to the Hold key as shown
on the key-map diagrams so that when the Hold key or softkey is
pressed on the handset, the call is placed on hold.
The handset Mute function is hard-coded to FCN +1 on the PTB4xx
handset. This function sequence is recommended, but the system
administrator can assign the Mute function to any available function
key sequence or leave the function unassigned. The SpectraLink 6000
and SpectraLink 8020/8030 Wireless Telephones use a Mute softkey.
FAB15 (LINE +9) is reserved for message waiting and cannot be used
for any other feature. The message-waiting icon on the handset is
activated with the message indication of the deskset. The voicemail
feature on the deskset must be assigned to the feature key as shown in
the key-map diagrams. Do not assign any other feature to this key,
since the associated LED is directly mapped to the message-waiting
icon on the handset. This LED assignment must be used in order to
support the message-waiting icon. Using this key for any other
feature or for line access could cause unacceptable system
If a handset such s the PTB 4xx has no speaker, speakerphone
function and functions that require the use of the volume keys will
not be made available on the handset. In this case, Mic Off and
SPEAKER buttons on the DT14DS are not mapped to keys on the
PN: 1725-36134-001_E.doc
LinkPlus Interface Guide: Fujitsu F9600 Telephone System
FAB10 through FAB13 may be used for up to 4 Autodial numbers per
handset. Specifics are described later in this document.
Ring types
Handset ring types (soft, normal, vibrator, etc.) are programmed by
the handset user and are not accessible or changeable by the system
switch. Whenever possible the audible ringer on the handset will
follow the cadence provided by the system switch. Call progress tones
provided by the host system will be passed through to the handset.
PN: 1725-36134-001_E.doc
Interface Implementation
This section describes the recommended programming to use the
SpectraLink 6000 System (MCU) or SpectraLink 8000 Wireless
Telephone system (Gateway) with a Fujitsu F9600 telephone system.
The procedures assume:
The F9600 is installed and operational in an approved
configuration. See the Telephone Switch Interface Matrix
document for tested configurations.
A trained Fujitsu technician or system administrator will be on
site with the SpectraLink installer to program the system.
The SpectraLink 6000 System or SpectraLink 8000 Telephony
Gateway is installed and the handsets are available for
Set the Switch Interface Type
SpectraLink 6100 MCU
The SpectraLink 6100 Master Control Unit requires the switch
interface type to be configured using the front panel buttons. The
configuration procedures are detailed in SpectraLink 6100 MCU:
Installation and Operation.
SpectraLink 6300 MCU
When configuring the SpectraLink 6300 MCU, the PBX interfaces are
available as sub-menu selections when defining the Interface Module
type using the SpectraLink 6300 MCU Operator’s Console. Refer to
SpectraLink 6300 MCU: Operator’s Console for details on configuring
the Interface Modules.
PN: 1725-36134-001_E.doc
LinkPlus Interface Guide: Fujitsu F9600 Telephone System
SpectraLink 8000 Telephony Gateways
Connect to the SpectraLink 8000 Telephony Gateway using the serial
or modem interface. From the Main Menu, choose Gateway
Configuration. Scroll to Telephone Switch Type and press enter to
change this field, from the Submenu of PBX types, select Fujitsu. Refer
to SpectraLink 8000 Telephony Gateway: Administration Guide for SRP for
details on configuring the Telephone Switch Type.
Key-mapping the Handset to Emulate
DT14DS Functionality
DT14DS Key-mapping
PN: 1725-36134-001_E.doc
Interface Implementation
The FCN +[number] and LINE+[number] labels represent the key
sequence on the handset mapped to the corresponding key on the
desk set.
The handset function menu default settings are shown on each
corresponding button in the above diagram; these may be changed as
described above in Function Menu Programming. Some of these
functions (Mute, Redial, Forward, etc.) are activated by softkeys or
FCN menu options on the SpectraLink 6000 and SpectraLink
8020/8030 Wireless Telephones.
FCN + 1
FCN + 2
FCN + 3
FCN + 6
FCN + 7
FCN + 8
FCN + #
Programming the F9600
Program the F9600 for use with the handset System as explained
below. For all of the F9600 command parameters, refer to the F9600
Command Manual.
Install the line card package
To support the handsets, the F9600 must have a B16DLA, B16DLC,
B16DLE or the latest digital line card.
The following command is used to install the line card in the F9600:
The parameters in brackets can be left blank. The F9600 will default to
the correct values.
Other related commands: DEL PKG, DIS PKG
MLDT assignments
The following command is used to assign a directory number,
equipment number, etc. to a station extension for the handsets:
PN: 1725-36134-001_E.doc
LinkPlus Interface Guide: Fujitsu F9600 Telephone System
Note that the TYPE must be 3.
The other parameters in the brackets can be the default values.
Other related commands: CHA MLDT, DEL MLDT, DIS MLDT
Clear programmable buttons
The programmable buttons are probably assigned to a default button
pattern. Perform the following to clear all buttons (button 00 will not
be cleared since this is the prime-line button).
Other related commands: ASS MLPFB, DIS MLPFB
Assign station name
If desired, use this command to assign a name to the extension.
Other related commands: CHA STNAM, DEL STNAM
Assign Features to Programmable Buttons
This assignment assigns selected features to selected buttons.
The Fujitsu PBX will reset a phone after you assign a feature to a
programmable button. Therefore the phone will be unusable for
possibly as long as 20 seconds.
If Autodial is to be utilized, Autodial keys FAB10 (FCN +4), FAB11
(FCN +5), FAB12 (FCN +9), and FAB13 (FCN +*) must be programmed
for the Autodial feature. Additionally, the Program Mode feature
must be assigned to a desk set Feature Access Button that is mapped
to the handset (E.g. FAB14/ LINE +8). See the key-map diagram for
information about which Feature Access Button can be utilized for
Program Mode.
PN: 1725-36134-001_E.doc
Interface Implementation
Note: The following features should not be assigned to the PTB 4xx,
and should not be assigned to other SpectraLink Wireless Telephones
if they are not supported on the handset:
All DATA features
All TCSI features
When programming is complete, the installer can test the handsets.
Programming an Autodial Number in the
The SpectraLink 6000 System supports the use of up to four Autodial
numbers per handset. Autodial numbers may be programmed into
handset key sequences FCN +4, FCN +5, FCN +9, and FCN +*, which
correspond to Fujitsu Feature Access Buttons FAB10 through FAB13
respectively, as shown on the DT14DS key-map diagram.
Programming an Autodial number into the handset will not program
the same number into the corresponding key on a desk set because
each device is associated with a unique prime line.
Do the following steps to set an Autodial number in the handset. Each
number may have up to 30 digits. All actions are done on the handset.
1. Go off-hook by pressing START.
2. Go into Program Mode by pressing the key sequence that
corresponds to the Feature Access Button for Program Mode (e.g.
3. Press the key sequence that you want to program (e.g., FCN+4).
4. Enter the telephone number (station line or outside number) to be
Autodialed when you press the handset key sequence.
5. Exit Program Mode by pressing the same key sequence that you
pressed in step b above (e.g. LINE+8).
6. Press END.
PN: 1725-36134-001_E.doc
LinkPlus Interface Guide: Fujitsu F9600 Telephone System
Using the Autodial feature
1. To use the Autodial feature, perform the following steps:
2. Press START on the same handset that was programmed above.
3. Press the Autodial key sequence for the number to be dialed (FCN
+4, FCN +5, FCN +9, or FCN +*).
The pre-programmed number is then dialed.
4. Wait for your party to answer.
5. Press END when the call is completed.
Effect of power loss
Note that the Autodial numbers are stored in the MCU/Gateway and
each number must be reprogrammed per step a through f each time
the system loses power or is shut off.
PN: 1725-36134-001_E.doc
Extension Assignments Worksheet
Shelf: _______ Interface Module: _______
Handset 1
Circuit #
Handset 2
Handset 3
Handset 4
Handset 5
Handset 6
Handset 7
Handset 8
Handset 9
Handset 10
Handset 11
Handset 12
Handset 13
Handset 14
Handset 15
Handset 16
Handset #
Ext. #
PN: 1725-36134-001_E.doc
Serial #
Download PDF