FujiFilm 16309733-3-KIT Digital Camera User Manual

20.1" High-resolution Multi-color LCD
MARINE RADAR
Models FAR-2157/2167DS
picture credit: ALBACORA SA. PESQUERAS ECHEBASTAR S.A.
sHigh output power radar delivers long-range
detection capability
sUp to four radar sets can be networked via
Ethernet without an extra device
sAdvanced signal processing for improved
detection of small targets, buoys and birds
sTarget trail with its various functions enhances situation awareness of vessel traffic
around the vessel
sStraightforward operation using customizable Function & Direct Key, trackball/wheel
palm module and rotary controls
sAll Echo Area Mode lets the operator observe a wider picture area around the vessel
The future today with FURUNO's electronics technology.
Catalogue No. R-192
9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111
Fax: +81 (0)798 65-4200, 66-4622 URL: www.furuno.co.jp
TRADEMARK REGISTERED
MARCA REGISTRADA
FURUNO high-performance radar for fishin
improved detectio
The FAR-2157 (X-band) and 2167DS (S-band) are the
latest additions to the world-renowed FAR-21x7 series
radar. Their software and hardware are optimized for
fishing operations, and they carry all the standard functions of the FAR-21x7 series.
Both radar incorporate state-of-the art signal/graphics
processing technology together with auto tuning, logarithmic amplifiers and anti-clutter controls, for superb
detection on all ranges. Thanks to its graphics processing technology, the echoes are expressively presented
with 32 gradations in accordance with reflected echo
strength. The anti-clutter controls suppress the unwanted echoes from waves, rain and clouds. The combination of these technologies ensures a clear image, even
in rough seas.
The FAR-2157 and 2167DS deliver a variety of useful functions to skippers. Direct Key control allows the
operators to activate specific settings with just a few
keystrokes. This feature is particularly important to oneman fishing operations, where quick setup of the radar
according to sea conditions is vital.
ARPA and echo trail functions are available to monitor the movement of targets precisely. With ARPA, the
targets are automatically or manually acquired, and their
movements, CPA and TCPA are computed and shown
in the cells on the right hand side of the screen.(For
acquisition of smaller targets such as birds and buoys,
they have to be manually acquired.) In addition, those
ship's tracks can be indicated in color, which the operators can select from eight different colors. For extended
monitoring of target movement, the echo trail feature is
recommended. The trail color can be shown in 12 colors. When the multi color trail is selected, the trail color
changes over time. True motion echo trail is also available.
The FAR-2157 and 2167DS consist of an antenna, 20.1"
LCD display, processor and control unit. For those who
prefer a different monitor, the BlackBox radar configuration is also available. The control unit is selectable from
Full-keyboard Control Unit and Palm Control Unit. With
a Palm Control Unit, all operations can be done by the
trackball.
sFunction & Direct Keys
30 often-used functions such as Anti-clutter Control or Echo Stretch, which are
customizable, are provided in the pre-set menu. F1 through F3 keys can be set up
to access the programs.(Function Keys)
You can also add 10 Direct Keys that memorize up to 10 steps of userprogrammable actions on the F4 key.
When you are in a specific situation where rapid action is required, you can switch
to the saved settings quickly with one hand operation.
BlackBox configuration types are also available!
The BlackBox radar, consisting of an antenna, processor
and control unit. They work with virtually any size multi-sync
SXGA (1280×1024) LCD monitor. FURUNO also offers a
premier line of high-quality LCD monitors that are a perfect
complement to the FAR-2157-BB and 2167DS-BB radar
systems.
• Supports non-interlaced SXGA (1280×1024)
monitors with DVI-D input
• Presentation of very high-quality radar image by
employing new Digital Video Interface (DVI) techniques
g vessels delivers
ng
on of vessels, birds, buoys and net floats.
S-band antenna for FAR-2167DS
60 kW TR up
(10 or 12 ft ANT selectable)
The FAR-2167DS is a high-performance S-band radar with 60 kW of
output power.
Detection and tracking of sea birds from a distance has always been
very important for commercial fishermen. The noticeable advantage of
the FAR-2167DS is its capability to detect flocks of seabirds. S-band
radar also assures target detection in adverse weather where an
X-band is heavily affected by sea or rain clutter.
X-band antenna for FAR-2157
50 kW TR up
(8 or 10 ft ANT selectable)
The FAR-2157 radar is suitable for detection of vessels and
buoys under most sea conditions. The 50 kW high-power
output enables long range detection and its long antenna
delivers high-resolution images.
100 Base-TX Ethernet Network System
Radar System 1
Radar System 2
Interswitch
The radar can be connected to an Ethernet network for
a variety of user requirements. Up to four radar systems
both X- and S-band can be networked without using an
extra device.
In addition, the essential navigational information
including the electronic chart, L/L, COG, SOG, STW, etc.
can be shared within the network.
Independent
Mix
Repeater
Antenna Unit
Antenna Unit
Antenna Unit
A
B
A
B
A
B
100 Base-TX
Other Radar Images, Chart data, Navigational information, etc.
A
B
A B
A
A
sAll Echo Area Mode
The radar has three modes to display the echo area: CIRCLE, WIDE,
and ALL.
With "All" Echo Area Mode, the entire screen is filled with an echo image.
Its full-screen echo presentation capability allows the operator to observe a
wider overview of the surrounding area, a function vital in fishing operations.
Selectable display mode for echo area
CIRCLE
WIDE
ALL
: the area where radar echo is displayed
sChart Overlay
The radar incorporates a Video Plotter that displays electronic charts,
plots own and other ship's tracks, enables entry of waypoints/routes
and makes a radar map. The chart may be displayed in combination
with radar images.
It is compatible with FURUNO or Navionics charts.
Overlay with FURUNO chart
sTarget Trail
The target trails feature generates a monotone or gradual shading
afterglow on all objects on the display. The trails are useful in
showing own ship movement and other ship tracks. True* or Relative
echo trail is available in Relative Motion. (only True echo trail is
selectable in True Motion)
Even if the plotting interval or display setting are changed, trails
remain on the screen and the trail length will change according to the
new setting.
*Heading sensor required
Long Trail Mode
Target trails are memorized for the duration of your
selected trail time from 15 seconds to 48 hours.
Narrow Trail Mode
Target trails can be painted with thinner lines if desired.
This is useful when there are a lot of targets on the screen
that need to be easily distinguished.
Multi-color Trail Mode
The target trails change their
colors in 12 gradations. The
color changes as time passes.
This makes it easier to know
the movement and speed of
targets.
Own Ship Trail OFF
This radar has functions to automatically prohibit the
unwanted trail which is generated around your vessel
according to the sea clutter level.
Trail Eraser
The generated trails of other vessels or sea clutter can
be erased with the trail eraser. It is useful for deleting
unwanted trails that are near
your vessel.
sMarks and Comments
Marks can be placed on the radar
screen to note certain positions
of importance. Comments can
be placed near the mark to aid in
their identification. Marks allow
a skipper to grasp the relative
position between own vessel and
mark locations.
With this function, a skipper can
enter the GPS position data* of
the fishing grounds and hazardous
objects for navigation such as
shallow waters.
Up to 8 letters can be typed to each mark
*GPS sensor required
Examples of marks (available in seven colors)
sGuard Zones
Automatic Acquisition Zone
Two automatic acquisition zones may be set in a sector in the
shape desired. They also act as suppression zones, avoiding
unnecessary overloading of the processor and clutter by
disabling automatic acquisition and tracking outside of them.
Targets in an automatic acquisition zone are shown with an
inverse triangle. The operator can manually acquire important
targets without any restrictions.
Guard Zones and Anchor Watch Zone
Guard Zones generate visual and audible alarms when targets
enter the operator-set zones. One of the Guard Zones may be
used as an anchor watch to alert the operator when own ship or
targets drift away from the preset zone.
CPA Alarm
Guard Zones
sPresentation Colors
The radar screen can be presented in a variety of colors
for easy observation under all lighting conditions.
The target tracking symbol changes to a triangle when its
predicted course (vector) violates the operator set CPA/TCPA.
The operator can readily change the vector lengths to evaluate
the target movement trend.
Target automatically
acquired
sARPA/AIS
AIS-equipped target
selected for data reading
Own ship data cell
DATA Cell 1
AIS information
Water temp,
Depth,
Wind
DATA Cell 2
Tracking data
DATA Cell 3
Tracking data
Zoom
AIS
Information
Data Display
Target Association (Fusion)
An AIS-equipped ship may be shown on the display by both AIS and
ARPA symbols. This happens because the AIS position is measured
by a GPS navigator in L/L while the ARPA target blip and data are
measured by range and bearing from own ship. When the symbols are
within an operator-set criteria, the ARPA symbol is merged into the AIS
symbol. The criteria is determined by the differences in range, bearing,
course, speed, etc.
A variety of navigational information which
is vital for fishing vessels, including own
ship status, radar plotting data, wind,
water temperature and information from
other shipborne sensors can be displayed
in the data cells on the right hand side of
the screen. The FAR-2157 and 2167DS
radar have a unique zoom function which
enlarges a part of the radar image twice or
three times in size.
Symbols for ARPA
Symbols for AIS
SOG (Speed over Ground) and
COG (Course over Ground) vector *1
Turning direction
(ROT indicator)
Past
positions
Past positions
Vector shows trend
of movement.
Heading line *2
*1 Vector shows STW
(speed thru water) and
CSE (course) when water
tracking mode is selected
at the radar. the length
of the vector changes
according to target's
speed.
*2 If there is no heading
data, the line points in
direction of COG.
Steady tracking
Initial stage
CPA alarm
Past Position Display
Selected Target
Sleeping AIS Target
Lost Target
Dangerous Target
Voyage related data
Ship’s draft
Hazardous cargo (type)
Destination and ETA
(at master's discretion)
Short safety-related messages
Free messages
Lost target
(Flashing)
Information to be presented
Information to be exchanged
Static Data
MMSI (Maritime Mobile Service Identity)
IMO number (Where available)
Call sign & name
Length and beam
Type of ship
Location of position-fixing antenna on the ship
The ARPA displays equally time-spaced dots
marking the past positions of any targets being
tracked. A new dot is added during preset time
intervals until the preset number is reached. AIS
also displays past position dots.
Dynamic data
Ship’s position with accuracy
indication and integrity status
Coordinated universal time (UTC)
Course over ground (COG)
Speed over ground (SOG)
Heading
Navigation status (manual input)
Rate of turn (where available)
Update rates Dependent on speed
and course alternation (2 s – 3 min)
Bearing from own ship to target in R (Relative) or T (True)
Range from own ship to target
Course Over Ground (COG)
Speed Over Ground (SOG)
Closest Point of Approach of target to own ship (CPA)
Time to CPA (TCPA)
Bow Crossing Range of target (BCR)
Bow Crossing Time of target (BCT)
Selecting the shape of ARPA symbols
After tracking a target, you can select and change the ARPA symbol shape by
placing the cursor on the symbol and hitting the “TARGET DATA” key.
It is useful to change the ARPA symbol to distinguish vessels and identify groups
of related targets.
The ARPA symbols are selectable from 10 shapes.
SPECIFICATIONS OF FAR-2157/2167DS
AUTOMATIC PLOTTING
ANTENNA RADIATORS
1. Type
Slotted waveguide array
2. Beamwidth and sidelobe attenuation
X-Band
Radiator Type
S-Band
XN-4A
XN-5A
SN-30AF
SN-36AF
8 ft
10 ft
10 ft
12 ft
Beamwidth (H)
0.95˚
0.75˚
2.25˚
1.8˚
Beamwidth (W)
20˚
20˚
25˚
25˚
Sidelobe (within ± 10˚)
-28 dB
-26 dB
-24 dB
-24 dB
Sidelobe (outside ± 10˚)
-32 dB
-30 dB
-30 dB
-30 dB
Length
1. Acquisition
100 targets (e.g. manually 50, automatically 50)
2. Tracking
Automatic tracking of all acquired targets in 0.1 to 32 nm
3. Guard zone
Two zones, one of them 0.5 nm depth
4. Vector
True or relative 30 s, 1-15, 20, 30 min for prediction of target motion
5. Past positions
5 or 10 past positions at intervals of 30 s,1, 2, 3, 6 min.
6. Collision warning
CPA limit: 0.2 - 10 nm, TCPA limit: 0 - 99 min.
7. Trial maneuver
Dynamic or static, with selected delay time.
AIS DISPLAY
3. Rotation
X-Band
S-Band
Rotation
18/22 rpm
22 rpm
Gear Box
RSB-106
RSB-107
21/26 rpm
RSB-111
RSB-112
RF TRANSCEIVER
1.Frequency
X-band:
S-band:
2. Output power
Output Power
Transceiver
3. Pulselength/PRF
Range scale (nm)
0.125, 0.25
0.5
0.75, 1.5
3
6
12, 24
48
96, 120
POWER SUPPLY (specify when ordering)
9410 MHz ± 30 MHz
3050 MHz ± 30 MHz
FAR-2157
50 kW
RTR-083
Pulse length (µs)
0.08
0.08
0.08, 0.2
0.2, 0.6
0.2, 0.6, 1.2
0.6, 1.2
1,2
1.2
4. I.F.
5. Bandwidth
Short pulse:
Medium pulse:
Long pulse:
RADAR DISPLAY
1. Symbols
Sleeping, Activated, Dangerous, Selected, Lost targets
2. Number of targets
1,000 targets max.
3. Data indication
Basic and expanded data
FAR-2167DS
60 kW
RTR-084
PRF (Hz)
1900
1900
1100, 1900
1100, 600
1100, 600
600
600
500
60 MHz
40 MHz
10 MHz
3 MHz
1. Display∗
20.1” color LCD (SXGA 1280×1024 pixels),
400 (H) × 320 (V) mm,
Effective display diameter: 308 mm
Echo Color: 12 colors (ex. red, yellow, green, blue, purple) in 24 levels
2. Range scales and ring intervals (nm)
Range .125, .25, .5, .75, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 96, 120
Ring
.025, .05, .1, .25, .25, .25, .5, .5, 1, 1, 2, 2, 4, 4, 8, 8, 16, 20
3. Minimum range
30 m on 0.75 nm range scale
4. Range discrimination
30 m on 0.75 nm range scale
5. Range ring accuracy
Within ± 1 %
6. Presentation modes
Head-Up, Course-Up, North-Up, North-Up True Motion
7. Parallel index lines
1, 2, 4 or 6 lines (selectable in menu)
8. Radar map
20,000 points to create coastlines, own ship safety contour, marks, comments, isolated underwater dangers, buoys, traffic routing systems, prohibited areas, fairways.
1. Processor Unit
100-115/220-230 VAC, 1ø, 50/60 Hz
3.0 A (100-115 VAC)
1.5 A (200-230 VAC)
440 VAC, 1ø, 50/60 Hz with optional transformer RU-1803
2. Monitor Unit∗
100-230 VAC, 1ø, 50/60 Hz
440 VAC, 1ø, 50/60 Hz with optional transformer RU-1803
3. Antenna Unit
FAR-2157:
24 VDC
200 VAC, 3ø, 50 Hz; 220 VAC, 3ø, 60 Hz
100-115/220-230 VAC, 1ø, 50/60 Hz with optional transformer RU-3423
110 VAC, 3ø, 60 Hz with optional transformer RU-5693
220 VAC, 3ø, 50 Hz with optional transformer RU-6522
440 VAC, 3ø, 50 Hz with optional transformer RU-5466-1
FAR-2167DS:
200 VAC, 3ø, 50 Hz; 220 VAC, 3ø, 60 Hz
380 VAC, 3ø, 50 Hz; 440 VAC, 3ø, 60 Hz
110 VAC, 3ø, 60 Hz with optional transformer RU-5693
220 VAC, 3ø, 50 Hz with optional transformer RU-6522
440 VAC, 3ø, 50 Hz with optional transformer RU-5466-1
STANDARD
1. Monitor Unit MU-201CR∗
2. Processor Unit RPU-013
3. Standard type Control Unit RCU-014
Trackball type Control Unit RCU-015
(Specify when ordering)
4. Antenna Unit with cable, 15/30/40/50 m (Specify when ordering)
5. Power Supply Unit PSU-006
6. Standard Spare Parts and Installation Materials
OPTION
1. Remote Control Unit RCU-016
2. Gyro Converter GC-10-2 (built in Processor Unit)
3. DVI-RGB Converter Kit (Buffer board built in) OP03-180-2
4. BNC Connector Converter DSUB-BNC-1 (for VDR)
5. Chart/Memory Card Interface Unit CU-200
6. Stepdown Transformer Unit RU-1803/5466-1/5693/6522
7. Rectifier Unit RU-3423
8. Antenna Cable RW-9600
9. External Alarm Buzzer OP03-21
10. Hand Grip Assembly FP03-09840
11. Bracket Assembly FP03-09820
12. Switching Hub HUB-100
∗ BlackBox types do not include monitor unit.
Antenna Unit for FAR-2157
Antenna Unit for FAR-2167DS
SN-30AF 127 kg 280 lb
SN-36AF 133 kg 293.2 lb
432 17.0"
580 22.8"
Processor Unit
Control Unit
Full-keyboard type
RPU-013 10 kg 22 lb
136 5.4"
180 7.1"
90
360 14.2"
308 12.1"
398 15.7"
411 16.2"
Monitor Unit MU-201CR (BlackBox types do not include the monitor unit)
Bracket mount
17.0 kg 37.5 lb
0
35
45
4
409 16.0"
526 20.7"
Panel mount
11
17
.9"
531 21.0"
11.0 kg 33.5 lb
Bracket
(option)
506 19.9"
534 21.0"
INTERCONNECTION DIAGRAM
4- 8
30 80
1.9" 3.2"
250V-DPYCY-1.5
Full-keyboard
Control Unit
RCU-014
or
GP-150 (Position, SOG, COG)
SDME (STW for ARPA)
IEC 61162-1
250V-TTYC-4
AIS FA-150
Gyro Interface
GC-10
IEC 61162-1
250V-MPYC-7
Gyro Compass
Gyro Converter
AD-100
Satellite Compass
SC-50/110
03S-9610
10/20/30 m
Ethernet
100Base-TX
Hub
HUB-100
FAR-21x7/28x7
Trackball Control Unit
RCU-015
24 VDC
100-115 VAC, 1 , 50/60 Hz
110 VAC, 3 , 60 Hz*
200-230 VAC, 1 , 50/60 Hz
200 VAC, 3 , 50 Hz
220 VAC, 3 , 60 Hz
380 VAC, 3 , 50 Hz
440 VAC, 3 , 60 Hz
100-115/220-230 VAC, 1 , 50/60 Hz
100-115 VAC, 1 , 50/60 Hz
200-230 VAC, 1 , 50/60 Hz
FURUNO U.S.A., INC.
FURUNO ESPAÑA S.A.
FURUNO SVERIGE AB
FURUNO DEUTSCHLAND GmbH
FURUNO (UK) LIMITED
FURUNO DANMARK AS
FURUNO FINLAND OY
LLC “FURUNO EURUS”
FURUNO FRANCE S.A.
Bordeaux-Mérignac, France
Phone: +33 5 56 13 48 00
Fax: +33 5 56 13 48 01
Hvidovre, Denmark
Phone: +45 36 77 45 00
Fax: +45 36 77 45 01
FURUNO NORGE A/S
Ålesund, Norway
Phone: +47 70 102950
Fax: +47 70 102951
350 13.8"
432 17.0"
IEC 61162-1
250V-TTYC-1
10/20/30 m
Havant, Hampshire, U.K.
Phone: +44 2392-441000
Fax: +44 2392-484316
< Cutout for flush mount >
Processor
Unit
RPU-013
10/20/30 m
Madrid, Spain
Phone: +34 91-725-90-88
Fax: +34 91-725-98-97
490 19.3"
5m
AVI cable
Monitor Unit
MU-201CR
Remote Control Unit
RCU-016
35 1.4"
50 2.0"
89 3.5"
506 19.9"
RW-9600
15/20/30/50 m
or
Camas, Washington, U.S.A.
Phone: +1 360-834-9300
Fax: +1 360-834-9400
160 6.3"
Antenna Unit (Specify when ordering)
For FAR-2157/2167DS
Commercial
Monitor**
Power
Supply
Unit
PSU-006
35 1.4"
50 2.0"
89 3.5"
160 6.3"
39 1.5"
54 2.1"
92 3.6"
4.3
"
287 11.3"
352 13.9"
Hand Grip
(option)
4- 4
420 16.5"
25
1.0"
498 19.6"
418 16.5"
183 7.2"
95
3.7"
110 4.3" 4- 4
110 4.3" 4- 4
98
8- 15
RCU-016 2.4 kg 5.3 lb
RCU-015 2.4 kg 5.3 lb
79 296 11.7"
3.1" 454 17.9"
350 13.8"
7
0.3"
RCU-014 3.7 kg 8.2 lb
27
1.1"
286 11.3"
Remote Control
Unit
Trackball type
136 5.4"
180 7.1"
2- 7
340 13.4"
380 15.0"
410 16.1"
385 15.2"
370 14.6"
250 9.8"
575 22.6"
296 11.7"
444 17.5"
530 20.9"
110 105 100 105 110
4.3" 4.1" 3.9" 4.1" 4.3"
137
5.4"
286 11.3"
420 16.5"
710 28.0"
635 25.0"
4- 15
SN-30AF: 3090 121.7"
SN-36AF: 3765 148.2"
421 16.6"
184 7.2"
135 5.3"
XN4A: 2570 101.2"
XN5A: 3210 126.4"
136 5.4"
180 7.1"
XN-4A 74 kg 163 lb
XN-5A 79 kg 170 lb
Västra Frölunda, Sweden
Phone: +46 31-7098940
Fax: +46 31-497093
Espoo, Finland
Phone: +358 9 4355 670
Fax: +358 9 4355 6710
FURUNO POLSKA Sp. Z o.o.
Gdynia, Poland
Phone: +48 58 669 02 20
Fax: +48 58 669 02 21
Rellingen, Germany
Phone: +49 4101 838 0
Fax: +49 4101 838 111
St. Petersburg, Russian Federation
Phone: +7 812 767 15 92
Fax: +7 812 766 55 52
Memory Card
Interface Unit
CU-200
Option or Shipyard Supply
Power
Specify power supply when ordering
*Optional transformer required
**For FAR-2157-BB/2167DS-BB
0612?S Printed in Japan