FujiFilm 16408967 Digital Camera User Manual

BL04801-100
DIGITAL CAMERA
X30
Owner’s Manual (Basic Operations)
Thank you for your purchase of this product.
■ Product website:
http://fujifilm-x.com/x30/
EN
Before You Begin
First Steps
Basic Photography
and Playback
Parts of the Camera
Menus
Appendix
For Your Safety
■ Product manuals:
http://fujifilm-dsc.com/manuals/
Before You Begin
Supplied Accessories
The following items are included with the camera:
NP-95 rechargeable battery
Lens cap
AC-5VT AC power adapter
Clip attaching tool
* Shape of adapter varies with region of sale.
2
Plug adapter *
Metal strap clips (× 2)
USB cable
• Protective covers (× 2)
• Shoulder strap
• Owner’s Manual
(this manual)
About This Manual
Memory Cards
Pictures are stored on optional SD, SDHC, and SDXC memory cards, referred to in this manual as “memory cards.”
Before You Begin
Symbols and Conventions
The following symbols are used in this manual:
Q This information should be read before use to ensure correct operation.
R Additional information that may be helpful when using the camera.
3
Product Care
For continued enjoyment of your camera, use a soft, dry cloth to clean the camera body after each use.
Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather on
the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth.
Use a blower to remove dust from the monitor, taking care to avoid scratches, and then gently wipe
with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of FUJIFILM
lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied.
4
Table of Contents
Before You Begin
First Steps
Attaching the Strap ...........................................................................6
Inserting the Battery and a Memory Card ..............................8
Charging the Battery ..................................................................... 10
Turning the Camera on and Off ................................................ 13
Basic Setup ......................................................................................... 14
Basic Photography and Playback
Taking Photographs ....................................................................... 16
Viewing Pictures .............................................................................. 18
Viewing Pictures Full Frame....................................................... 18
Viewing Photo Information ....................................................... 19
Playback Zoom ............................................................................... 20
Multi-Frame Playback................................................................... 21
Deleting Pictures ............................................................................. 22
FRAME ................................................................................................ 22
SELECTED FRAMES ........................................................................ 23
ALL FRAMES ..................................................................................... 23
Basic Movie Recording and Playback..................................... 24
Recording High-Definition (HD) Movies ............................... 24
Viewing Movies............................................................................... 24
Viewing Pictures on a Computer .............................................. 25
Parts of the Camera
Parts of the Camera ........................................................................ 26
The Selector ..................................................................................... 28
The Mode dial.................................................................................. 28
The Command Dial ....................................................................... 29
The Control Ring ............................................................................ 29
The VIEW MODE Button .............................................................. 30
The LCD Monitor ............................................................................ 31
Diopter Adjustment ...................................................................... 31
The Indicator Lamp ....................................................................... 31
Camera Displays............................................................................... 32
Shooting: LCD Monitor/Viewfinder ..................................... 32
Playback.......................................................................................... 34
Menus
Before You Begin
Supplied Accessories ........................................................................2
About This Manual .............................................................................3
Symbols and Conventions ............................................................3
Memory Cards ....................................................................................3
Product Care .........................................................................................4
Using the Menus: Shooting Mode ........................................... 36
Using the Shooting Menu .......................................................... 36
Shooting Menu Options.............................................................. 37
Using the Menus: Playback Mode............................................ 39
Using the Playback Menu ........................................................... 39
Playback Menu Options .............................................................. 40
The Setup Menu ............................................................................... 41
Using the Setup Menu ................................................................. 41
Setup Menu Options .................................................................... 42
Appendix
FUJIFILM X30 Product Information ......................................... 44
Free FUJIFILM Apps ....................................................................... 44
Caring for the Camera ................................................................... 45
Storage and Use ............................................................................. 45
Traveling ............................................................................................ 45
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS...................................... 46
Safety Notes ..................................................................................... 47
NOTICES ............................................................................................. 51
5
First Steps
Attaching the Strap
Attach the strap clips to the camera and then attach the strap.
1 Open a strap clip.
Use the clip attaching tool to open a strap clip,
making sure that the tool and clip are in the
orientations shown.
Q Keep the tool in a safe place. You will need it to
open the strap clips when removing the strap.
2 Place the strap clip on an eyelet.
Hook the strap eyelet in the clip opening. Remove the tool, using the other hand to keep
the clip in place.
3 Pass the clip through the eyelet.
Rotate the clip fully through
the eyelet until it clicks
closed.
6
Attaching the Strap
4 Attach a protective cover.
Place a protective cover over the eyelet as
shown, with the black side of the cover toward
the camera. Repeat Steps 1–4 for the second
eyelet.
6 Fasten the strap.
Fasten the strap as shown. Repeat Steps 5–6
for the second eyelet.
First Steps
Q To avoid dropping the camera, be sure the strap is
correctly secured.
5 Insert the strap.
Insert the strap through a protective cover
and strap clip.
7
Inserting the Battery and a Memory Card
Insert the battery and memory card as described below.
1 Open the battery-chamber cover.
Slide the battery-chamber latch as shown and
open the battery-chamber cover.
2 Insert the battery.
Using the battery to keep the battery latch
pressed to one side, insert the battery contacts first in the direction shown by the arrow.
Confirm that the battery is securely latched.
Arrow
Q Do not open the battery-chamber cover when
the camera is on. Failure to observe this precaution could damage image files or memory cards.
Q Do not use excessive force when handling the
battery-chamber cover.
Battery latch
Q Insert the battery in the orientation shown. Do
not use force or attempt to insert the battery upside down or backwards. The battery will slide in
easily in the correct orientation.
8
Inserting the Battery and a Memory Card
3 Insert the memory card.
4 Close the battery-chamber cover.
Holding the memory card in the orientation
shown, slide it in until it clicks into place at the
back of the slot.
First Steps
Click!
Q Be sure card is in the correct orientation; do not
insert at an angle or use force. If the memory
card is not correctly inserted or no memory card
is inserted, a will appear in the LCD monitor
and internal memory will be used for recording
and playback.
Removing the Battery and Memory Card
Before removing the battery or memory card, turn
the camera off and open the battery-chamber cover.
To remove the battery, press
the battery latch to the side,
and slide the battery out of the
camera as shown.
Battery latch
To remove the memory card,
press it in and release it slowly.
The card can then be removed
by hand. When a memory card
is removed, the card could
come out of the slot too quickly. Use your finger to hold it and
gently release the card.
9
Charging the Battery
The battery is not charged at shipment. Charge the battery before use. The camera charges the battery internally.
• The camera uses an NP-95 rechargeable battery.
• The battery takes about 4 hours and 30 minutes to fully charge.
1 Attach the plug adapter to the AC power
adapter.
Attach the plug adapter as shown, making
sure that it is fully inserted and clicks into place
on the AC power adapter terminals.
2 Charge the battery.
Connect the camera to the supplied AC power adapter using the supplied USB cable. Then
plug the AC power adapter into an indoor
power outlet.
AC power adapter
Q Be sure the connectors are in the correct orientation and then insert them fully.
Plug adapter
Q The plug adapter is exclusively for use with the
supplied AC power adapter. Do not use it with
other devices.
10
Charging the Battery
Charge status
The battery status icons show battery charge status when the camera is turned on, and the indicator lamp
shows it when the camera is turned off.
Indicator lamp when camera off
On
Off
Blinks
—
Battery status
Battery charging.
Charging complete.
Battery fault.
Operating in external power mode.
R The camera operates in external power mode if the camera is turned on while the camera is connected to AC
power and the battery is inserted.
First Steps
Battery status icon when camera on
Y (yellow)
N (green)
Z (red)
No icon
Q The battery will not charge while the camera is in the shooting mode.
Q Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could prevent
the battery from charging.
Q Do not affix stickers or other objects to the battery. Failure to observe this precaution could make it impossible
to remove the battery from the camera.
Q Do not short the battery terminals. The battery could overheat.
Q Read the cautions in “The Battery and Power Supply”.
Q Use only battery chargers designated for use with the battery. Failure to observe this precaution could result
in product malfunction.
Q Do not remove the labels from the battery or attempt to split or peel the outer casing.
Q The battery gradually loses its charge when not in use. Charge the battery one or two days before use.
Q Charging times may increase at very low or very high temperatures.
11
Charging the Battery
Charging via a computer
The battery can be charged by connecting the camera to a computer. Connect the supplied USB cable as
shown, making sure the connectors are fully inserted.
Q Connect the camera directly to the computer; do not use a USB hub or keyboard.
Q If the computer goes into sleep mode while charging, charging will stop. To continue charging, disable sleep
mode on the computer, and disconnect and connect the USB cable.
Q Charging may be impossible depending on computer specifications, settings or conditions.
12
Turning the Camera on and Off
To turn the camera on, rotate the zoom ring as
shown. Rotate the zoom ring to OFF to turn the
camera off.
112 85 50 35
28
Turning the Camera on in Playback Mode
To turn the camera on and begin playback, press the
a button for about a second.
OFF
R Press the a button to start playback. Press the
shutter button halfway to return to shooting mode.
R The camera will turn off automatically if no operations are performed for the length of time selected
for Z POWER MANAGEMENT > AUTO POWER
OFF in the setup menu. To reactivate the camera
after it has turned off automatically, rotate the zoom
ring to OFF and then turn the camera on.
Q Fingerprints and other marks on the lens or viewfinder can affect pictures or the view through the
viewfinder. Keep the lens and viewfinder clean.
Q The camera does not exit to shooting mode when
pressing the shutter button.
First Steps
Press the a button again to turn the camera off.
Battery Level
After turning the camera
on, check the battery level
in the display.
Indicator
N
L
J
J
(red)
Description
Battery close to fully charged.
Battery about two-thirds charged.
Battery about one-third charged. Charge
as soon as possible.
Battery exhausted. Turn camera off and
recharge battery.
13
Basic Setup
A language-selection dialog is displayed the first
time the camera is turned on. Set up the camera as described below (you can reset the clock
or change languages at any time using the
F DATE/TIME or Q a options in the
setup menu).
Using the Selector
Press the selector up, down, left, or right to highlight
items and press MENU/OK to select.
Move cursor up
Select highlighted
item
Move cursor left
112 85 50 35
28
OFF
2 Highlight a language and press MENU/OK.
START MENU
ENGLISH
FRANCAIS
DEUTSCH
Move cursor right
Move cursor down
14
1 Turn the camera on.
SET
NO
R Press DISP/BACK to skip the current step. Any
steps you skip will be displayed the next time
the camera is turned on.
Basic Setup
4 Power management options will be dis-
the selector left or right to highlight the year,
month, day, hour, or minute and press up
or down to change. To change the order in
which the year, month, and day are displayed,
highlight the date format and press the selector up or down. Press MENU/OK when settings
are complete.
played. Press the selector up or down to highlight one of the following options and then
press MENU/OK:
• n POWER SAVE: Save battery power.
• o HIGH PERFORMANCE: Choose for a brighter
display and faster focus.
DATE/TIME NOT SET
2016
2015
YY. MM. DD
2014
2013
2012
SET
1. 1
12 : 00
AM
R If the battery is removed for an extended period,
the camera clock will be reset and the languageselection dialog will be displayed when the camera
is turned on.
First Steps
3 The date and time will be displayed. Press
NO
15
Basic Photography and Playback
Taking Photographs
This section covers the basics of taking pictures in S (ADVANCED SR AUTO) mode.
1 Select S mode.
Rotate the mode dial to S (ADVANCED SR AUTO).
The following information will be displayed in
the LCD monitor.
Scene Icon
The camera automatically selects the appropriate
scene.
The g Icon
In S mode, the camera continuously adjusts focus and searches for faces, increasing the drain on
the battery. g is displayed in the LCD monitor.
16
Using the Flash
To raise the flash when lighting is poor, press the
flash pop-up switch.
Taking Photographs
2 Ready the camera.
4 Focus.
Hold the camera steady
with both hands and brace
your elbows against your
sides. Shaking or unsteady
hands can blur your shots.
3 Frame the picture.
Use the zoom ring to frame the picture in the
display. The zoom indicator appears.
R If the subject is poorly lit, the AF-assist illuminator may light.
If the camera is able to
focus, it will beep twice
and focus area and focus indicator will glow
green. Focus and exposure will lock while
the shutter button is
pressed halfway.
Focus frame
Focus indicator
If the camera is unable to focus, the focus frame
will turn red, s will be displayed, and the focus indicator will blink white.
5 Shoot.
Zoom ring
Zoom indicator
Basic Photography and Playback
To prevent pictures that are
out of focus or too dark (underexposed), keep your fingers and other objects away
from the lens and flash.
Frame the picture with your subject
in the center of the display and press
the shutter button halfway to focus.
Smoothly press the shutter button
the rest of the way down to take the
picture.
17
Viewing Pictures
Viewing Pictures Full Frame
To view pictures full frame, press a.
100-0001
Additional pictures can be viewed by pressing the selector left or right or rotating the command dial.
Press the selector or rotate the dial right to view pictures in the order recorded, left to view pictures in
reverse order. Keep the selector pressed to scroll rapidly to the desired frame.
R Pictures taken using other cameras are indicated by a m (“gift image”) icon during playback.
Favorites: Rating Pictures
To rate the current picture, press DISP/BACK and press the selector up and down to select from zero to five stars.
18
Viewing Pictures
Viewing Photo Information
The photo information display changes each time the selector is
pressed up.
Basic data
Info display 1
Info display 2
11/15/2015 11:15 AM
NEXT
BACK
R Press the selector left or right or rotate the command dial to view other images.
Zooming in on the Focus Point
Press the center of the command dial to zoom in on the focus point. Press the center of the command dial
again to return to full-frame playback.
Basic Photography and Playback
11/15/2015 11:15 AM
19
Viewing Pictures
Playback Zoom
Rotate the control ring right to zoom in on the current picture, left to
zoom out (to view multiple images, rotate the control ring left when the
picture is displayed full frame). Press DISP/BACK or MENU/OK to exit zoom.
Control ring
Rotate right
Rotate right
100-0001
Zoom indicator
Rotate left
R The maximum zoom ratio varies with image size. Playback zoom is not available with cropped or resized copies saved at a size of a.
The Navigation Window
When the picture is zoomed in, the selector can be used to
view areas of the image not currently visible in the display.
Navigation window shows
portion of image currently
displayed
20
Viewing Pictures
Multi-Frame Playback
To change the number of images displayed, rotate the control ring left
when a picture is displayed full frame.
Control ring
100-0001
Rotate right to view
fewer images.
Use the selector to highlight images and press MENU/OK to view the highlighted image full frame (to
zoom in on the selected image, rotate the control ring right when the picture is displayed full frame).
In the nine- and hundred-frame displays, press the selector up or down to view more pictures.
Basic Photography and Playback
Rotate left to view
more images.
21
Deleting Pictures
To delete individual pictures, multiple selected
pictures, or all pictures, press the b button when
a picture is displayed full frame and choose from
the options on the following pages. Note that
deleted pictures can not be recovered. Copy important pictures to a computer or other storage
device before proceeding.
ERASE
FRAME
SELECTED FRAMES
ALL FRAMES
R Protected pictures can not be deleted. Remove protection from any pictures you wish to delete.
R If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to
delete the pictures.
R If a memory card is inserted, pictures will be deleted
from the memory card. Otherwise pictures will be
deleted from internal memory.
22
FRAME
Delete pictures one at a time.
1 Press the b button in full-frame playback and
select FRAME.
2 Press the selector left or right to scroll through
pictures and press MENU/OK to delete (a confirmation dialog is not displayed). Repeat to
delete additional pictures.
Deleting Pictures
SELECTED FRAMES
Delete multiple selected pictures.
1 Press the b button in full-frame playback and
choose SELECTED FRAMES.
ALL FRAMES
Delete all unprotected pictures.
1 Press the b button in full-frame playback and
choose ALL FRAMES.
2 A confirmation dialog will be displayed; high-
or deselect (pictures in photobooks or print
orders are shown by S).
light OK and press MENU/OK to delete all unprotected pictures. Pressing DISP/BACK cancels
deletion; note that any pictures deleted before
the button was pressed can not be recovered.
3 When the operation is complete, press
DISP/BACK to display a confirmation dialog.
4 Highlight OK and press MENU/OK to delete the
selected pictures.
Basic Photography and Playback
2 Highlight pictures and press MENU/OK to select
23
Basic Movie Recording and Playback
Recording High-Definition (HD) Movies
The camera can be used to record short highdefinition movies.
1 Press the movie-record button to start recording.
Viewing Movies
During playback, movies
are displayed as shown at
right. The following operations can be performed
while a movie is displayed:
11/15/2015 11:15 AM
PLAY
Movie icon
Operation
Recording indicator
Time remaining
2 Press the button again to end recording. Recording ends automatically when the maximum length is reached or the memory card is
full.
Q The indicator lamp lights while movies are being
recorded.
24
Description
Press the selector down to start playback.
Press again to pause. While playback
Start/pause playback is paused, you can press the selector
left or right to rewind or advance one
frame at a time.
End playback
Press the selector up to end playback.
Press the selector left or right to adjust
Adjust speed
playback speed during playback.
Viewing Pictures on a Computer
Connect the camera using the supplied USB cable and copy pictures to the computer.
Q Connect the camera directly to the computer; do not use a USB hub or keyboard.
http://fujifilm-dsc.com/mfs/
• RAW FILE CONVERTER (available for download from the website below) can be used to view RAW images on
your computer.
http://fujifilm-dsc.com/rfc/
Mac OS
RAW FILE CONVERTER (available for download from the website below) can be used to view RAW images on
your computer.
Basic Photography and Playback
Windows
• MyFinePix Studio (available for download from the website below) can be used to copy pictures to a computer, where they can be stored, viewed, organized, and printed.
http://fujifilm-dsc.com/rfc/
25
Parts of the Camera
Parts of the Camera
26
Parts of the Camera
A Control ring options button
B Shutter button
C Movie-record button (function button 1)
D Exposure compensation dial
E Mode dial
F AF-assist illuminator
* Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
e Diopter adjustment control
f Eye sensor
g Indicator lamp
h VIEW MODE button
i DRIVE button
b (delete) button (playback mode)
j Command dial
k AEL/AFL (autoexposure/autofocus lock) button
l Q (quick menu) button
RAW conversion button (playback mode)
m Selector/function buttons
n Fn button (function button 6)
Wi-Fi button (playback mode)
o DISP (display)/BACK button
Parts of the Camera
Self-timer lamp
G Hot shoe
H Microphone (L/R)
I Flash
J Strap eyelet
K Focus mode selector
L Control ring
M Zoom ring
ON/OFF switch
N Lens
O Monitor
P Electronic viewfinder (EVF)
Q Terminal cover
R DC coupler cable cover
S Battery chamber cover
T Battery-chamber cover latch
U Speaker
V Tripod mount
W Microphone/remote release connector
X Micro HDMI connector *
Y Micro USB connector
Z Battery latch
a Battery chamber
b Memory card slot
c N (flash pop-up) switch
d a (playback) button
27
Parts of the Camera
The Selector
Press the selector up (w),
left (e), right (r), or
down (t) to highlight
items and press MENU/OK
(q) to select. The up, left,
right, and down buttons
also double as function
buttons 2 through 5.
28
The Mode dial
To choose a shooting mode,
rotate the mode dial to the
desired setting.
• S (ADVANCED SR AUTO): The camera automatically optimizes settings to the scene.
• B (AUTO): A simple “point-and-shoot” mode recommended for first-time users of digital cameras.
• P: Aperture and shutter speed can be adjusted using
program shift.
• S, A, M: Select for full control over camera settings, including aperture (M and A) and/or shutter speed (M
and S).
• Filter (ADVANCED FILTER): Select for taking photos with
filter effects.
• Adv. (ADVANCED): Sophisticated techniques made easy.
• SP1/SP2 (SCENE POSITION): Choose a scene suited to the
subject or shooting conditions and let the camera do
the rest.
• u (MOTION PANORAMA 360): Pan the camera to take a
series of shots that are automatically joined into a
panorama.
Parts of the Camera
The Command Dial
The command dial can be used to navigate the menus, to view pictures, and
to select options in the quick menu
display.
• DEFAULT
• ISO
• WHITE BALANCE
• FILM SIMULATION
• CONTINUOUS
“DEFAULT”
When DEFAULT is selected, the function assigned to
the control ring changes with the shooting mode.
Mode
S
B
P
S
A
M
Filter
Adv.
SP1/SP2
Control ring used for
Film simulation
Film simulation; manual focus 1
Program shift; manual focus 1
Shutter-speed selection; manual focus 1
Aperture selection; manual focus 1
Shutter-speed/aperture selection 2; manual focus 1
Advanced filter selection
Advanced mode selection
Scene selection; manual focus 1
Parts of the Camera
Press the center of the command dial
to zoom in on the active focus area
during shooting or playback.
The Control Ring
Use the control ring for
quick access to camera
functions during shooting.
The function assigned to
the control ring can be selected by pressing the
control ring options button. Choose from:
1 Manual focus mode only
2 Press the control ring options button to switch between shutterspeed and aperture selection.
29
Parts of the Camera
The VIEW MODE Button
Press the VIEW MODE button to cycle through displays as shown below.
EVF
E EYE SENSOR:
SENSOR Automatic display
selection using eye sensor
EVF
EVF ONLY: Viewfinder only
LCD
EVF
EVF ONLY + E: Viewfinder only; eye
sensor turns display on or off
LCD
LCD ONLY: LCD monitor only
The Eye Sensor
The eye sensor turns the viewfinder on when you put your eye to the viewfinder and turns
it off when you take your eye away (note that the eye sensor may respond to objects other
than your eye or to light shining directly on the sensor). If automatic display selection is
enabled, the LCD monitor will turn on when the viewfinder turns off.
30
Parts of the Camera
The LCD Monitor
The LCD monitor can be
tilted for easier viewing, but
be careful not to touch the
wires or trap fingers or other
objects behind the monitor. Touching the wires could
cause camera malfunction.
The indicator lamp shows camera status as follows:
Indicator lamp
Camera status
Glows green Focus locked.
Blur, focus, or exposure warning. Picture can
Blinks green
be taken.
Blinks green Recording pictures. Additional pictures can
and orange be taken.
Recording pictures. No additional pictures
Glows orange
can be taken at this time.
Blinks orange Flash charging; flash will not fire when pic(Fast)
ture is taken.
Blinks orange The zoom ring is positioned between ON
(Slow)
and OFF. Pictures cannot be taken.
Blinks red
Lens or memory error.
Parts of the Camera
Diopter Adjustment
The camera is equipped with
diopter adjustment to accommodate individual differences
in vision. Rotate the diopter
adjustment control until the
viewfinder display is in sharp
focus.
The Indicator Lamp
R Warnings may also appear in the display.
31
Camera Displays
The following types of indicator may be displayed during shooting and playback. In the description
that follows, all available indicators are shown for illustrative purposes; the indicators actually displayed
vary with camera settings.
■ Shooting: LCD Monitor/Viewfinder
* a: indicates that no memory card is inserted and that pictures will be stored in the camera’s internal memory.
32
Camera Displays
O Control lock
P Silent mode indicator
Q Histogram
R Distance indicator
S Battery level
T Sensitivity
U Exposure indicator
V Aperture
W Shutter speed
X AE lock indicator
Y Shooting mode
Z Metering
a Focus frame
b Advanced Anti Blur
c Continuous mode
d Self-timer indicator
e Macro (close-up) mod
f Dual IS mode
g Electronic level
h Intelligent digital zoom
i Zoom indicator
j Flash mode/Flash compensation
k Microphone/remote release
l Focus mode
m Manual focus indicator
n Focus indicator
Display Selection
Press the DISP/BACK button to choose the information displayed in the monitor and electronic viewfinder.
Standard
Information off
Parts of the Camera
A Focus check
B Date stamp
C Location data download status
D Monitor sunlight mode
E Movie mode
F Time remaining
G Internal memory indicator *
H Number of available frames
I Image size/quality
J Focus warning
K White balance
L Film simulation
M Dynamic range
N Temperature warning
Info display (monitor only)
33
Camera Displays
■ Playback
11/15/2015 11:15 AM
34
Camera Displays
A Date and time
B Intelligent face detection indicator
C Red-eye removal indicator
D Pro focus mode, pro low-light mode
E Advanced filter
F Motion panorama z
G Location data
H Protected image
I Silent mode indicator
J Frame number
K Gift image
L Photobook assist
M DPOF print indicator
N Battery level
O Image size/quality
P Film simulation
Q Dynamic range
R White balance
S Sensitivity
T Exposure compensation
U Aperture
V Shutter speed
W Playback mode indicator
X Mark for upload to
Y Favorites
Standard
Information off
11/15/2015 11:15 AM
Parts of the Camera
Display Selection
Press the DISP/BACK button to choose the information displayed in playback mode.
11/15/2015 11:15 AM
11/15/2015 11:15 AM
FAVORITES
Favorites
NEXT
Info display
35
Menus
Using the Menus: Shooting Mode
Use the shooting menus to adjust shooting settings. The options available vary with the shooting
mode selected.
Using the Shooting Menu
1 Press MENU/OK to display the shooting menu.
SHOOTING MENU
PROGRAM AE
AUTOFOCUS SETTING
3 Press the selector right to display options for
the highlighted item.
AUTOFOCUS SETTING
FOCUS AREA
EXIT
2 Press the selector up or down to highlight the
desired menu item.
4 Press the selector up or down to highlight the
desired option.
5 Press MENU/OK to select the highlighted option.
6 Press DISP/BACK to exit from the menu.
36
Using the Menus: Shooting Mode
Shooting Menu Options
P FILM SIMULATION
Simulate the effects of different types of film.
A Adv. MODE
Choose an advanced shooting mode.
X FILM SIMULATION BKT
Choose film types for film simulation bracketing.
d ADVANCED FILTER
Choose to take photos with filter effects.
B SELF-TIMER
Take pictures with the self-timer.
G AUTOFOCUS SETTING
Adjust autofocus settings.
o INTERVAL TIMER SHOOTING
Adjust settings for interval timer photography.
N ISO
Control the camera’s sensitivity to light.
D WHITE BALANCE
Adjust colors to match the light source.
O IMAGE SIZE
Choose the size and aspect ratio at which still pictures
are recorded.
f COLOR
Adjust color density.
T IMAGE QUALITY
Choose a file format and compression ratio.
U DYNAMIC RANGE
Control contrast.
Menus
A SCENE POSITION
Choose a scene for SP1/SP2 mode.
q SHARPNESS
Sharpen or soften outlines.
r HIGHLIGHT TONE
Adjust the appearance of highlights.
s SHADOW TONE
Adjust the appearance of shadows.
h NOISE REDUCTION
Reduce noise in pictures taken at high sensitivities.
37
Using the Menus: Shooting Mode
R INTELLIGENT DIGITAL ZOOM
Intelligent digital zoom magnifies the image while processing it for sharp, high-resolution results.
Z ADVANCED ANTI BLUR
Select ON to enable advanced anti blur in S mode.
u SELECT CUSTOM SETTING
Recall settings saved with K EDIT/SAVE CUSTOM
SETTING.
K EDIT/SAVE CUSTOM SETTING
Save settings.
b FACE DETECTION
Choose whether the camera automatically detects and
sets focus and exposure for human portrait subjects.
C PHOTOMETRY
Choose how the camera measures the brightness of
the subject.
v INTERLOCK SPOT AE & FOCUS AREA
Choose whether the camera meters the current focus
frame when p SPOT is selected for C PHOTOMETRY.
38
c MF ASSIST
Choose how focus is displayed in manual focus mode.
w CONTROL RING SETTING
Set functions assigned to the control ring.
p FLASH SET-UP
Choose a flash mode and flash level.
W MOVIE SET-UP
Adjust movie settings.
r WIRELESS COMMUNICATION
Connect to a smartphone or tablet over a wireless network.
Using the Menus: Playback Mode
Using the Playback Menu
1 Press the a button to enter playback mode.
2 Press MENU/OK to display the playback menu.
PLAYBACK MENU
WIRELESS COMMUNICATION
5 Press the selector up or down to highlight the
desired option.
6 Press MENU/OK to select the highlighted option.
7 Press DISP/BACK to exit from the menu.
EXIT
3 Press the selector up or down to highlight the
desired menu item.
the highlighted item.
Menus
4 Press the selector right to display options for
39
Using the Menus: Playback Mode
Playback Menu Options
r WIRELESS COMMUNICATION
Connect to a smartphone or tablet over a wireless network.
s PC AUTO SAVE
Upload pictures to a computer over a wireless network.
b IMAGE SEARCH
Search for pictures.
A ERASE
Delete pictures.
j MARK FOR UPLOAD TO
Select pictures for upload to YouTube, Facebook or
MyFinePix.com using MyFinePix Studio (Windows only).
I SLIDE SHOW
View pictures in an automated slide show.
j RAW CONVERSION
Create JPEG copies of RAW pictures.
B RED EYE REMOVAL
Remove red-eye from portraits.
D PROTECT
Protect pictures from accidental deletion.
G CROP
Create a cropped copy of the current picture.
40
e RESIZE
Create a cropped copy of the current picture.
C IMAGE ROTATE
Rotate pictures.
E COPY
Copy pictures from internal memory to a memory card.
m PHOTOBOOK ASSIST
Create books from your favorite photos.
K PRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridgecompatible devices.
V instax PRINTER PRINT
Print pictures on optional FUJIFILM instax SHARE printers.
J DISP ASPECT
Choose how High Definition (HD) devices display pictures with an aspect ratio of 3 : 2.
The Setup Menu
Using the Setup Menu
1 Display the setup menu.
1.1 Press MENU/OK to display the menu for the
current mode.
1.2 Press the selector left to highlight the tab
for the current menu.
2 Adjust settings.
2.1 Press the selector up or down to highlight
a menu item.
SET-UP
TIME DIFFERENCE
SHOOTING MENU
PROGRAM AE
EXIT
EXIT
SET-UP
TIME DIFFERENCE
HOME
LOCAL
SET-UP
EXIT
1.4 Press the selector right to place the cursor
in the setup menu.
Menus
1.3 Press the selector down to highlight the
setup menu tab containing the desired
option.
2.2 Press the selector right to display options
for the highlighted item.
2.3 Press the selector up or down to highlight
an option.
2.4 Press MENU/OK to select the highlighted option.
2.5 Press DISP/BACK to exit from the menu.
41
The Setup Menu
Setup Menu Options
F DATE/TIME
Set the camera clock.
b SOUND SET-UP
Adjust sound settings.
N TIME DIFFERENCE
Switch the camera clock instantly from your home time
zone to the local time at your destination when traveling.
A SCREEN SET-UP
Adjust display settings.
Qa
Choose a language.
R RESET
Reset shooting or setup menu options to default values.
o SILENT MODE
Disable the speaker, flash, illuminator, and self-timer
lamp in situations in which camera sounds or lights
may be unwelcome.
I CONTROL RING
Choose the direction in which the control ring is rotated to increase the focus distance in manual focus
mode.
j FOCUS CHECK
The image will be magnified in the display to assist focus when the control ring is rotated in manual focus
mode.
42
F FUNCTION (Fn) SETTING
Choose the roles played by the function buttons.
h SELECTOR BUTTON SETTING
Choose the roles played by the buttons on the selector.
g EDIT/SAVE QUICK MENU
Choose the options displayed in the quick menu.
Z POWER MANAGEMENT
Adjust power management settings.
L IS MODE
Reduce camera and subject blur.
B RED EYE REMOVAL
Remove red-eye effects caused by the flash.
The Setup Menu
k AE/AF-LOCK MODE
Choose the role played by the AEL/AFL button.
v AE/AF-LOCK BUTTON
Choose whether the AEL/AFL button locks only exposure, only focus, or both exposure and focus.
t SAVE DATA SET-UP
Adjust file management settings.
M FOCUS SCALE UNITS
Choose the units used for the focus distance indicator.
V instax PRINTER CONNECTION SETTING
Adjust settings for connection to optional FUJIFILM
instax SHARE printers.
f EDIT FILE NAME
Change the file name prefix.
K FORMAT
If a memory card is inserted in the camera, this option
will format the memory card. If no memory card is inserted, this option will format internal memory.
r WIRELESS SETTINGS
Adjust settings for connection to wireless networks.
U GEOTAGGING SET-UP
View location data downloaded from a smartphone
and choose whether to save the data with your pictures.
Menus
s PC AUTO SAVE SETTING
Choose an upload destination.
43
Appendix
For more information on FUJIFILM digital camera, visit the websites listed below.
FUJIFILM X30 Product Information
Optional accessories and support information
can be found on the following website.
fujifilm X30
Free FUJIFILM Apps
FUJIFILM apps give you more opportunities to
enjoy your pictures on smartphones, tablets, and
computers.
http://fujifilm-dsc.com/
fujifilm Wi-Fi app
MyFinePix Studio (Windows only) can be used to
copy pictures to a computer, where they can be
stored, viewed, organized, and printed.
http://fujifilm-dsc.com/mfs/
fujifilm mfs
RAW FILE CONVERTER can be used to view RAW
images on your computer.
http://fujifilm-dsc.com/rfc/
fujifilm rfc
44
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
■ Water and Sand
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.
■ Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If this
occurs, turn the camera off and wait an hour before turning it on again. If condensation forms on
the memory card, remove the card and wait for
the condensation to dissipate.
Traveling
Keep the camera in your carry-on baggage.
Checked baggage may suffer violent shocks that
could damage the camera.
Appendix
Storage and Use
If the camera will not be used for an extended period, remove the battery and memory card. Do
not store or use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very high temperatures, such as in a closed vehicle on a sunny
day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic fields, such as near
a broadcasting antenna, power line, radar emitter, motor, transformer, or magnet
• in contact with volatile chemicals such as pesticides
• next to rubber or vinyl products
45
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
• Read Instructions
Instructions: All the safety and operating instructions
should be read before the appliance is operated.
• Retain Instructions
Instructions: The safety and operating instructions
should be retained for future reference.
• Heed Warnings
Warnings: All warnings on the appliance and in the
operating instructions should be adhered to.
• Follow Instructions
Instructions: All operating and use instructions
should be followed.
Installation
Power Sources: This video product should be operated only
from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your
home, consult your appliance dealer or local power company. For video products intended to operate from battery
power, or other sources, refer to the operating instructions.
This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation
is provided or the manufacturer’s instructions have been
adhered to. This video product should never be placed near
or over a radiator or heat register.
Attachments: Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video product near water—for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-supply cords should be routed
so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the
Grounding or Polarization: This video product is equipped point where they exit from the appliance.
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the Accessories: Do not place this video product on an unstable
power outlet only one way. This is a safety feature. If you cart, stand, tripod, bracket, or table. The video product may
are unable to insert the plug fully into the outlet, try revers- fall, causing serious injury to a child or adult, and serious
ing the plug. If the plug should still fail to fit, contact your damage to the appliance. Use only with a cart, stand, trielectrician to replace your obsolete outlet. Do not defeat pod, bracket, or table recommended by the manufacturer, or
sold with the video product. Any mounting of the appliance
the safety purpose of the polarized plug.
should follow the manufacturer’s instructions, and should use
Alternate Warnings: This video product is equipped with a mounting accessory recommended by the manufacturer.
a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding- An appliance and cart combination
type power outlet. This is a safety feature. If you are unable should be moved with care. Quick
to insert the plug into the outlet, contact your electrician to stops, excessive force, and uneven
replace your obsolete outlet. Do not defeat the safety pur- surfaces may cause the appliance
and cart combination to overturn.
pose of the grounding type plug.
Overloading: Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
Ventilation: Slots and openings in the cabinet are provided
for ventilation, to ensure reliable operation of the video
product and to protect it from overheating, and these openings must not be blocked or covered. The openings should
never be blocked by placing the video product on a bed,
sofa, rug, or other similar surface.
46
Antennas
Outdoor Antenna Grounding: If an outside antenna or cable
system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70,
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
Ground Clamp
Antenna Lead
in Wire
Electric Service
Equipment
Antenna
Discharge Unit
(NEC SECTION
810-20)
Ground Clamps
Power Service Grounding Electrode
System (NEC ART 250. PART H)
Grounding Conductors
(NEC SECTION 810-21)
Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Use
Cleaning: Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Object and Liquid Entry: Never push objects of any kind into this
video product through openings as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.
Lightning: For added protection for this video product receiver during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
For Your Safety
Service
Be sure to read these notes before use
Servicing: Do not attempt to service this video product
Safety Notes
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to • Make sure that you use your camera correctly. Read these
qualified service personnel.
safety notes and your Owner’s Manual carefully before use.
Damage Requiring Service: Unplug this video product from • After reading these safety notes, store them in a safe place.
the wall outlet and refer servicing to qualified service perAbout the Icons
sonnel under the following conditions:
The icons shown below are used in this document to indi• When the power-supply cord or plug is damaged
cate the severity of the injury or damage that can result if the
• If liquid has been spilled, or objects have fallen into the
information indicated by the icon is ignored and the product
video product.
is used incorrectly as a result.
• If the video product has been exposed to rain or water.
• If the video product has been dropped or the cabinet has
This icon indicates that death or seribeen damaged.
WARNING ous injury can result if the information
If the video product does not operate normally follow the
is ignored.
operating instructions. Adjust only those controls that are
This icon indicates that personal injury
covered by the operating instructions as an improper adjustCAUTION or material damage can result if the inment of other controls may result in damage and will often
formation is ignored.
require extensive work by a qualified technician to restore
The icons shown below are used to indicate the nature of the
the video product to its normal operation.
instructions which are to be observed.
When the video product exhibits a distinct change in perforTriangular icons tell you that this information remance — this indicates a need for service.
quires attention (“Important”).
Replacement Parts: When replacement parts are required,
Circular icons with a diagonal bar tell you that the
be sure the service technician has used replacement parts
action indicated is prohibited (“Prohibited”).
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
Unplug
from power
socket
Do not use in
the bathroom
or shower
Do not disassemble
Do not touch
internal parts
Do not use the camera in the bathroom or shower.
This can cause a fire or electric shock.
Never attempt to change or take apart the camera
(never open the case). Failure to observe this precaution can cause fire or electric shock.
Should the case break open as the result of a fall or
other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged
parts. Remove the battery immediately, taking
care to avoid injury or electric shock, and take the
product to the point of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the
connection cord. These actions could damage the
cord and cause a fire or electric shock. If the cord
is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This
can cause the camera to fall or tip over and cause
injury.
Never attempt to take pictures while in motion. Do
not use the camera while walking or driving. This
can result in you falling down or being involved in
a traffic accident.
For Your Safety
Safety Check: Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
Filled circles with an exclamation mark indicate an
action that must be performed (“Required”).
WARNING
If a problem arises, turn the camera off, remove the
battery, and disconnect and unplug the AC power
adapter. Continued use of the camera when it
is emitting smoke, is emitting any unusual odor,
or is in any other abnormal state can cause a fire
or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the
camera. If water or foreign objects get inside the
camera, turn the camera off, remove the battery,
and disconnect and unplug the AC power adapter. Continued use of the camera can cause a fire
or electric shock. Contact your FUJIFILM dealer.
47
For Your Safety
WARNING
Do not touch any metal parts of the camera during
a thunderstorm. This can cause an electric shock
due to induced current from the lightning discharge.
Do not use the battery except as specified. Load the
battery as shown by the indicator.
Do not heat, change or take apart the battery. Do not
drop or subject the battery to impacts. Do not store
the battery with metallic products.
products. Any of these actions can cause the battery to burst or leak and
cause fire or injury as a result.
Use only batteries or AC power adapters specified for
use with this camera. Do not use voltages other than
the power supply voltage shown. The use of other
power sources can cause a fire.
If the battery leaks and fluid gets in contact with your
eyes, skin or clothing, flush the affected area with
clean water and seek medical attention or call an
emergency number right away.
Do not use the charger to charge batteries other than
those specified here. The supplied charger is for use
only with batteries of the type supplied with the
camera. Using the charger to charge conventional
batteries or other types of rechargeable batteries
can cause the battery to leak, overheat or burst.
Do not use in the presence of flammable objects, explosive gases, or dust.
When carrying the battery, install it in a digital camera or keep it in the hard case. When storing the battery, keep it in the hard case. When discarding, cover
the battery terminals with insulation tape. Contact
with other metallic objects or batteries could
cause the battery to ignite or burst.
Keep memory cards out of the reach of small children.
Because memory cards are small, they can be
swallowed by children. Be sure to store memory
cards out of the reach of small children. If a child
swallows a memory card, seek medical attention
or call an emergency number.
48
WARNING
Turn the camera off in crowds. The camera emits
radio-frequency radiation that may interfere with
pacemakers.
Turn the camera off in the vicinity of automatic doors,
public address systems, and other automatically controlled devices. The camera emits radio-frequency
radiation that may cause these devices to malfunction.
Keep the camera at least 22 cm (0.7 ft.) away from
people wearing pacemakers. The camera emits
radio-frequency radiation that may interfere with
pacemakers.
CAUTION
Do not use this camera in locations affected by oil
fumes, steam, humidity or dust. This can cause a
fire or electric shock.
Do not leave this camera in places subject to extremely
high temperatures. Do not leave the camera in
locations such as a sealed vehicle or in direct sunlight. This can cause a fire.
Keep out of the reach of small children. This product
could cause injury in the hands of a child.
Do not place heavy objects on the camera. This can
cause the heavy object to tip over or fall and
cause injury.
Do not move the camera while the AC power adapter
is still connected. Do not pull on the connection cord
to disconnect the AC power adapter. This can damage the power cord or cables and cause a fire or
electric shock.
Do not cover or wrap the camera or the AC power
adapter in a cloth or blanket. This can cause heat
to build up and distort the casing or cause a fire.
When you are cleaning the camera or you do not plan
to use the camera for an extended period, remove
the battery and disconnect and unplug the AC power
adapter. Failure to do so can cause a fire or electric shock.
CAUTION
When charging ends, unplug the charger from the
power socket. Leaving the charger plugged into
the power socket can cause a fire.
Using a flash too close to a person’s eyes may temporarily affect the eyesight
eyesight.. Take particular care when
photographing infants and young children.
When a memory card is removed, the card could come
out of the slot too quickly. Use your finger to hold it
and gently release the card. Injury could result to
those struck by the ejected card.
Request regular internal testing and cleaning for
your camera. Build-up of dust in your camera
can cause a fire or electric shock. Contact your
FUJIFILM dealer to request internal cleaning every
two years. Please note that this service is not free
of charge.
Danger of explosion if battery is incorrectly replaced.
Replace only with batteries of the same type.
Remove your fingers from the flash window before the
flash fires. Failure to observe this precaution could
result in burns.
Keep the flash window clean and do not use the flash if
the window is obstructed. Failure to observe these
precautions could cause smoke or discoloration.
For Your Safety
■ Storage
The Battery and Power Supply
Note: Check the type of battery used in your camera and Performance may be impaired if the battery is left unused
for extended periods when fully charged. Run the battery
read the appropriate sections.
flat before storing it.
The following describes the proper use of batteries and how
to prolong their life. Incorrect use can shorten battery life or If the camera will not be used for an extended period, remove the battery and store it in a dry place with an ambient
cause leakage, overheating, fire, or explosion.
temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do
Li-ion Batteries
not store in locations where moisture could be present or
Read this section if your camera uses a rechargeable where the battery could be exposed to extremes of temLi-ion battery.
perature.
For Your Safety
• If the camera will not be used for an extended period, remove the batteries. Note that the camera clock will be reset.
• The batteries may be warm to the touch immediately after
use. Turn the camera off and allow the batteries to cool
before handling.
• Battery capacity tends to decrease at low temperatures.
Keep spare batteries in a pocket or other warm place and
exchange as necessary. Cold batteries may recover some
of their charge when warmed.
• Fingerprints and other stains on the battery terminals
can impair battery performance. Thoroughly clean the
The battery is not charged at shipment. Charge the battery ■ Cautions: Handling the Battery
terminals with a soft, dry cloth before inserting them in
before use. Keep the battery in its case when not in use.
• Do not transport or store with metal objects such as neckthe camera.
laces or hairpins.
■ Notes on the Battery
If the batteries leak, clean the battery compartment
The battery gradually loses its charge when not in use. • Do not expose to flame or heat.
thoroughly before inserting new batteries.
• Do not disassemble or modify.
Charge the battery one or two days before use.
• Use with designated chargers only.
If fluid from the battery comes into contact with skin
Battery life can be extended by turning the camera off when • Dispose of used batteries promptly.
or clothing, flush the affected area with water. If
not in use.
• Do not drop or subject to strong physical shocks.
fluid enters your eyes, immediately flush the affected
Battery capacity decreases at low temperatures; a depleted • Do not expose to water.
area with water and seek medical attention. Do not rub
•
Keep
the
terminals
clean.
battery may not function at when cold. Keep a fully charged
your eyes. Failure to observe this precaution could result
spare battery in a warm place and exchange as necessary, • The battery and camera body may become warm to the
in permanent visual impairment.
impairment
touch after extended use. This is normal.
or keep the battery in your pocket or other warm place and
■ Ni-MH Batteries
insert it in the camera only when shooting. Do not place AA Alkaline/Rechargeable Ni-MH Batteries
The capacity of Ni-MH batteries may be temporarily reduced
the battery in direct contact with hand warmers or other
Read this section if your camera uses AA alkaline or re- when new, after long periods of disuse, or if they are repeatheating devices.
chargeable AA Ni-MH batteries. Information on compat- edly recharged before being fully discharged. This is normal
■ Charging the Battery
ible battery types may be found elsewhere in the camera and does not indicate a malfunction. Capacity can be inCharging times will increase at ambient temperatures below manual.
creased by repeatedly discharging the batteries using the
+10 °C (+50 °F) or above +35 °C (+95 °F). The battery will not
discharge option in the camera setup menu and recharging
■ Cautions: Handling the Batteries
charge at temperatures above 40 °C (+104 °F); at temperathem using a battery charger.
• Do not expose to water, flame, or heat, or store in warm or
tures below 0 °C (+32 °F), the battery will not charge.
Q CAUTION: Do not use the discharge option with alkaline
humid conditions.
batteries.
Do not attempt to recharge a fully charged battery. The bat- • Do not transport or store with metal objects such as necktery does not however need to be fully discharged before
laces or hairpins.
charging.
• Do not disassemble or modify the batteries or battery
casing.
The battery may be warm to the touch immediately after
• Do not subject to strong physical shocks.
charging or use. This is normal.
• Do not use batteries that are leaking, deformed, or discol■ Battery Life
ored.
At normal temperatures, the battery can be recharged about • Keep out of reach of infants and small children.
300 times. A noticeable decrease in the length of time the • Insert in the correct orientation.
battery will hold a charge indicates that it has reached the • Do not mix old and new batteries, batteries with different
end of its service life and should be replaced.
charge levels, or batteries of different types.
49
For Your Safety
The camera draws a small amount of current even when off.
Ni-MH batteries that have been left in the camera for an extended period may be drawn down to the point that they no
longer hold a charge. Battery performance may also drop if
the batteries are run down in a device such as a flashlight. Use
the discharge option in the camera setup menu to discharge
Ni-MH batteries. Batteries that no longer hold a charge
even after repeatedly being discharged and recharged have
reached the end of their service life and must be replaced.
Ni-MH batteries can be recharged in a battery charger (sold separately). Batteries may become warm to the touch after charging. Refer to the instructions provided with the charger for more
information. Use the charger with compatible batteries only.
Ni-MH batteries gradually lose their charge when not in use.
■ Disposal
CAUTION: Dispose of used batteries in accord with local
regulations.
AC Power Adapters (Available Separately)
This section applies to all camera models. Use only
FUJIFILM AC power adapters designated for use with this
camera. Other adapters could damage the camera.
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected to the camera.
• Turn the camera off before disconnecting the adapter.
Disconnect the adapter by the plug, not the cable.
• Do not use with other devices.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the touch during
use. This is normal.
• If the adapter causes radio interference, reorient or relocate
the receiving antenna.
Using the Camera
• Do not aim the camera at extremely bright light sources,
such as the sun in a cloudless sky. Failure to observe this
precaution could damage the camera image sensor.
• Strong sunlight focused through the viewfinder may damage the panel of electronic viewfinder (EVF). Do not aim
the electronic viewfinder at the sun.
50
Take Test Shots
Before taking photographs on important occasions (such as
at weddings or before taking the camera on a trip), take a
test shot and view the results to ensure that the camera is
functioning normally. FUJIFILM Corporation can not accept
liability for damages or lost profits incurred as a result of
product malfunction.
Notes on Copyright
Unless intended solely for personal use, images recorded using your digital camera system cannot be used in ways that
infringe copyright laws without the consent of the owner.
Note that some restrictions apply to the photographing of
stage performances, entertainments, and exhibits, even
when intended purely for personal use. Users are also asked
to note that the transfer of memory cards containing images
or data protected under copyright laws is only permissible
within the restrictions imposed by those copyright laws.
Trademark Information
Digital Split Image is a trademark or registered trademark
of FUJIFILM Corporation. xD-Picture Card and E are
trademarks of FUJIFILM Corporation. The typefaces included herein are solely developed by DynaComware Taiwan
Inc. Macintosh, QuickTime, and Mac OS are trademarks
of Apple Inc. in the U.S.A. and other countries. Windows
8, Windows 7, Windows Vista, and the Windows logo are
trademarks of the Microsoft group of companies. Wi-Fi® and
Wi-Fi Protected Setup® are registered trademarks of the Wi-Fi
Alliance. Adobe and Adobe Reader are either trademarks or
registered trademarks of Adobe Systems Incorporated in the
U.S.A. and/or other countries. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo is a trademark.
YouTube is a trademark of Google Inc. All other trade names
mentioned in this manual are the trademarks or registered
trademarks of their respective owners.
Electrical Interference
Handling
This camera may interfere with hospital or aviation equipTo ensure that images are recorded correctly, do not subject
ment. Consult with hospital or airline staff before using the
the camera to impact or physical shocks while images are
camera in a hospital or on an aircraft.
being recorded.
Color Television Systems
Liquid Crystal
NTSC (National Television System Committee) is a color televiIn the event that the display is damaged, care should be
sion telecasting specification adopted mainly in the U.S.A., Cantaken to avoid contact with liquid crystal. Take the urgent
ada, and Japan. PAL (Phase Alternation by Line) is a color televiaction indicated should any of the following situations arise:
sion system adopted mainly in European countries and China.
• If liquid crystal comes in contact with your skin, clean the
area with a cloth and then wash thoroughly with soap and Electrical Interference
running water.
Exif Print is a newly revised digital camera file format in
• If liquid crystal enters your eyes, flush the affected eye with which information stored with photographs is used for opticlean water for at least 15 minutes and then seek medical mal color reproduction during printing.
assistance.
• If liquid crystal is swallowed, rinse your mouth thoroughly
with water. Drink large quantities of water and induce
vomiting, then seek medical assistance.
Although the display is manufactured using extremely highprecision technology, it may contain pixels that are always lit
or that do not light. This is not a malfunction, and images
recorded with the product are unaffected.
For Your Safety
FCC Caution: Any changes or modifications not expressly apNOTICES
proved by the party responsible for compliance could void
To prevent fire or shock hazard, do not expose the unit the user’s authority to operate this equipment.
to rain or moisture.
This transmitter must not be co-located or operating in conPlease read the “Safety Notes” and make sure you un- junction with any other antenna or transmitter.
derstand them before using the camera.
Radiation Exposure Statement: This device meets the governPerchlorate Material—special handling may apply. See ment’s requirements for exposure to radio waves. This device is
http://www.dtsc.ca.gov/hazardouswaste/perchlorate.
designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
For Customers in the U. S. A.
Communications Commission of the U.S. Government.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
The exposure standard for wireless device employs a unit
of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR
are conducted using standard operating positions accepted
by the FCC with the device transmitting at its highest certiContains IC : 7736B-02000002
fied power level in all tested frequency bands.
Contains FCC ID : W2Z-02000002
FCC Statement: This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Disposal of Electrical and Electronic Equipment in Private Households
In the European Union, Norway, Iceland and
Liechtenstein: This symbol on the product, or in
the manual and in the warranty, and/or on its
packaging indicates that this product shall not
be treated as household waste. Instead it should
be taken to an applicable collection point for the
recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences to the environment and human health, which could otherwise be
Notes on the Grant: To comply with Part 15 of the FCC Rules, caused by inappropriate waste handling of this product.
this product must be used with a Fujifilm-specified ferriteThis symbol on the batteries or accumulators incore A/V cable, USB cable, and DC supply cord.
dicates that those batteries shall not be treated
as household waste.
A lithium ion battery that is recyclable
powers the product you have purchased.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
For Customers in Canada
CAN ICES-3 (B)/NMB-3(B)
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
Industry Canada statement: This device complies with RSS210 of the Industry Canada Rules. Operation is subject to
the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
If your equipment contains easy removable batteries or
accumulators please dispose these separately according to
your local requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling this
product, please contact your local city office, your household
waste disposal service or the shop where you purchased the
product.
In Countries Outside the European Union, Norway, Iceland and
Liechtenstein: If you wish to discard this product, including
the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal.
In Japan: This symbol on the batteries indicates
This device and its antenna(s) must not be co-located or op- that they are to be disposed of separately.
erating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection
feature is disabled for products marketed in the US/ Canada.
For Your Safety
CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as
described in this manual. The further RF exposure reduction
can be achieved if the product can be kept as far as possible
from the user body or set the device to lower output power
if such function is available.
Radiation Exposure Statement: The product comply with the
51
For Your Safety
European Union regulatory notice
This product complies with the following EU Directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• R & TTE Directive 1999/5/EC
Wireless Network Devices: Cautions
• This device operates on the same frequency as commercial, educational, and medical devices and
wireless transmitters. It also operates on the same frequency as licensed transmitters and
special unlicensed low-voltage transmitters used in RFID tracking systems for assembly
lines and in other similar applications.
To prevent interference with the above devices, observe the following precautions. Confirm that
•
Compliance with these directives implies conformity to applicable harmonized European
the RFID transmitter is not in operation before using this device. Should you observe that
standards (European Norms) which are listed on the EU Declaration of Conformity issued by
the device causes interference in licensed transmitters used for RFID tracking, immediately
FUJIFILM Corporation for this product or product family.
choose a new operating frequency for this device to prevent additional interference. If you
This compliance is indicated by the following conformity marking placed on the product:
notice that this device causes interference in low-voltage RFID tracing systems, contact a
FUJIFILM representative.
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g.
Bluetooth).
Regarding the Declaration of Conformity, visit http://www.fujifilm.com/products/
digital_cameras/x/fujifilm_x30/pdf/index/fujifilm_x30_cod.pdf.
IMPORTANT: Read the following notices before using the camera’s built-in wireless
transmitter.
Q This product, which contains encryption function developed in the United States, is controlled by the United States Export Administration Regulations and may not be exported
or re-exported to any country to which the United States embargoes goods.
• Use only as part of a wireless network. FUJIFILM does not accept liability for damages resulting from unauthorized use. Do not use in applications requiring a high degree of reliability,
for example in medical devices or other systems that may directly or indirectly impact
human life. When using the device in computer and other systems that demand a greater
degree of reliability than wireless networks, be sure to take all necessary precautions to
ensure safety and prevent malfunction.
• Use only in the country in which the device was purchased. This device conforms to regulations
governing wireless network devices in the country in which it was purchased. Observe all
location regulations when using the device. FUJIFILM does not accept liability for problems arising from use in other jurisdictions.
• Wireless data (images) may be intercepted by third parties. The security of data transmitted
over wireless networks is not guaranteed.
• Do not use the device in locations subject to magnetic fields, static electricity, or radio interference.
Do not use the transmitter in the vicinity of microwave ovens or in other locations subject
to magnetic fields, static electricity, or radio interference that may prevent reception of
wireless signals. Mutual interference may occur when the transmitter is used in the vicinity
of other wireless devices operating in the 2.4 GHz band.
• The wireless transmitter operates in the 2.4 GHz band using DSSS and OFDM modulation.
52
2.4DS/OF4
This sticker indicates that this device operates in the 2.4 GHz
band using DSSS and OFDM modulation and may cause interference at distances of up to 40 m.
Memo
53
Memo
54
Memo
55
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html