FujiFilm 7129032 Digital Camera User Manual

Getting Ready
Using the Camera
Advanced Features
• Photography
• Playback
• Movie
Settings
OWNER’S MANUAL
This manual will show you how to use
your FUJIFILM DIGITAL CAMERA
FinePix S5700 / FinePix S700 / FinePix
S5800 / FinePix S800 correctly.
Please follow the instructions carefully.
Camera Connection
Software
Installation
Appendices
Troubleshooting
BL00644-200(1)
Warning
To prevent fire or shock hazard, do not expose the unit to rain
or moisture.
For customers in Canada
For customers in the U.S.A.
This Class B digital apparatus complies with Canadian ICES-003.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for
help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void the user’s authority to operate
the equipment.
Notes on the Grant:
To comply with Part 15 of the FCC Rules, this product must be used
with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC
supply cord.
2
CAUTION
Please read the Safety Notes (➝p.176) and make
sure you understand them before using the camera.
IMPORTANT
NOTICE
BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM
Corporation, PLEASE READ THIS END USER LICENSE AGREEMENT
CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,
SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.
BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE
BOUND BY THIS AGREEMENT.
End User License Agreement
This End User License Agreement (“Agreement”) is an agreement between
FUJIFILM Corporation (“FUJIFILM”) and you, which sets forth the terms
and conditions of the license granted for you to use the software provided
by FUJIFILM.
The CD-ROM contains third party software. In case a separate agreement
is provided by a third party supplier for its software, the provisions of such
separate agreement shall apply to the use of such third party software,
prevailing over those of this Agreement.
1. Definitions.
(a) “Media” means the CD-ROM titled “Software for FinePix CX”- which
is provided to you together with this Agreement.
(b) “Software” means the software which is recorded on Media.
(c) “Documentation” means the operation manuals of Software and
other related written materials which are provided to you together
with Media.
(d) “Product” means Media (including Software) and Documentation
collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a) to install one copy of Software onto one computer in binary machine
executable form;
(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any
part of Software, Media or Documentation to any third party without
FUJIFILM’s prior written consent. You also shall not sublicense,
assign or otherwise transfer all or any part of the rights granted to
you by FUJIFILM under this Agreement without FUJIFILM’s prior
written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not
copy or reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation.
You also shall not alter or remove copyright and other proprietary
notices that appear on or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer,
decompile, or disassemble Software.
Be sure to read this page before using the software.
4. Ownership.
All copyrights and other proprietary rights to Software and Documentation are
owned and retained by FUJIFILM or the third party suppliers as indicated on
or in Software or Documentation. Nothing contained herein shall be
construed, expressly or implicitly, as transferring or granting any right, license,
or title to you other than those explicitly granted under this Agreement.
5. Limited Warranty.
FUJIFILM warrants to you that Media is free from any defect in material
and workmanship under normal use for ninety (90) days from the date
of your receipt of Media. Should Media not meet the foregoing warranty,
FUJIFILM shall replace such defective Media with other Media bearing
no defect. FUJIFILM’s entire liability and your sole and exclusive
remedy with regard to any defect in Media shall be expressly limited to
such FUJIFILM’s replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES
PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,
EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,
INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY
COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER
PROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,
OR FITNESS FOR ANY PARTICULAR PURPOSE.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY
GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,
INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE
USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
8. No export.
You acknowledge that neither Software nor any part thereof, will be
transferred, or exported to any country or used in any manner in violation
of any export control laws and regulations to which Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof, FUJIFILM
may immediately terminate this Agreement without any notice.
10. Term.
This Agreement is effective until the date when you cease to use
Software, unless earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your own
responsibility and expense, delete or destroy immediately all Software
(including its copies), Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance with
laws of Japan.
3
EC Declaration of Conformity
We
Name:
Address:
FUJIFILM Europe GmbH
Heesenstrasse 31
40549 Dusseldorf, Germany
declare that the product
Product Name:
FUJIFILM DIGITAL CAMERA FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix S800
Manufacturer’s Name:
FUJIFILM Corporation
Manufacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU,
TOKYO 107-0052, JAPAN
conforms to the following Standards:
Safety: EN60950-1: 2001
EMC: EN55022: 2006 Classe B
EN55024: 1998 + A1: 2001 + A2: 2003
EN61000-3-2: 2000 + A2: 2003
following the provision of the EMC Directive (2004/108/EC) and Low Voltage Directive (2006/95/EC).
Dusseldorf, Germany
June 1, 2007
Place
Date
Signature/Managing Director
This product comes with batteries. When these are empty, you shouldn’t throw them
away but deliver them as domestic chemical refuse.
4
Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this
product shall not be treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to
the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local
requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you have purchased the product.
In Countries outside the EU:
If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.
5
Contents
Warning................................................................. 2
IMPORTANT ......................................................... 3
EC Declaration of Conformity................................ 4
Disposal of Electric and Electronic Equipment in
Private Households ......................................... 5
Contents................................................................ 6
Preface.................................................................. 9
About this Manual ............................................... 11
Accessories Included .......................................... 12
Camera Parts and Features................................ 13
Example of screen Text Display.......................... 16
Getting Ready
Attaching the Strap and Lens Cap ...................... 17
Loading the Batteries .......................................... 19
Checking the battery charge ....................... 21
Loading the Memory Card................................... 22
Turning On and Off ............................................. 25
Setting the language, date, and time .......... 26
Correcting the Date and Time ............................. 28
Selecting the Language ...................................... 29
Using the Camera
Taking Pictures (B AUTO Mode) ................. 30
Taking pictures with the focus and
exposure locked ....................................... 34
AF-assist illuminator.................................... 36
Using zoom function ................................... 36
Adjusting the shot composition ................... 37
Viewing the Images............................................. 39
6
Erasing the Images/Movies .......................... 44
Using the erase button ( /n)................... 44
Erasing the images using
Playback menu ........................................ 44
Advanced Features — Photography
Using the Photography Functions —
Procedure of Setting .....................................
Setting the Shooting Mode .................................
B Auto.................................................
Picture Stabilization ..............................
Natural Light ........................................
NATURAL & d ...................................
,
SCENE POSITION.....................
N Program AE............................................
< Aperture Priority AE ...............................
M Shutter Priority AE..................................
> Manual...................................................
Adjusting the Image Brightness
(D Exposure Compensation) .......................
e Macro (Close-up) ...........................................
d Setting the Flash (Intelligent Flash) ................
* Self-Timer ......................................................
Setting self-timer ........................................
Taking pictures using self-timer .................
f Taking pictures continuously.........................
j Increasing LCD Monitor Brightness ..............
Using p-MODE MENU (Photography)/
SHOOTING MENU .......................................
Setting the p-MODE MENU
(Photography)..........................................
47
51
51
51
52
52
53
57
58
60
62
64
66
67
69
69
69
71
74
75
75
Setting the SHOOTING MENU ................... 75
p-MODE MENU (Photography) ......................... 79
Changing the sensitivity setting
(S ISO) ................................................... 79
Changing the quality setting
( QUALITY) .......................................... 80
Changing the FinePix COLOR setting
( FinePix COLOR) ................................ 81
SHOOTING MENU ............................................. 82
Selecting light metering method
( PHOTOMETRY) ................................ 82
Adjusting color balance
(T WHITE BALANCE) ........................... 83
Focusing the shot quickly
( HIGH-SPEED SHOOTING) ............... 84
Specifying the focusing mode
(H FOCUSING) ...................................... 85
Specifying the focusing area
( AF MODE) ......................................... 87
Adjust the image outline (hard/soft)
(G SHARPNESS) .................................. 89
Adjust the amount of light emitted by the flash
(
FLASH (Brightness Adjustment)) ...... 89
Photograph the same image with different
exposure (
BRACKETING).................. 90
Advanced Features — Playback
Playback Information .......................................... 91
Using p-MODE MENU (Playback)/PLAYBACK
MENU ............................................................ 92
Setting the p-MODE MENU
(Playback) ............................................... 92
Setting the PLAYBACK MENU .................. 92
p-MODE MENU (Playback) .............................. 93
Setting automatic playback
( SLIDE SHOW) .................................. 93
DPOF set frame
( PRINT ORDER (DPOF)) ................... 93
PLAYBACK MENU............................................. 97
Rotating the images
( IMAGE ROTATE) .............................. 97
Protecting the images
( PROTECT)........................................ 98
Copying the images
(V COPY) .............................................. 99
Adding voice memos to the images
( VOICE MEMO)................................ 102
Trimming the images
( TRIMMING)..................................... 105
Advanced Features — Movie
r Recording Movies .......................................
Using the Image Stabilization Function....
Changing movie size ...............................
w Playing Back Movies...................................
107
109
109
111
Settings
U SET-UP ...................................................... 113
Using the SET-UP menu.......................... 113
SET-UP menu option ............................... 114
Continued Q
7
Contents
Camera Connection
Usable Memory Cards
Connecting to a TV ........................................... 123
Using the AC power adapter
(sold separately) .......................................... 124
Connecting Camera Directly to Printer —
PictBridge Function ..................................... 125
Software Installation
Installation on a Windows PC ........................... 129
Installation on a Mac OS X ............................... 132
Connecting to a PC ........................................... 135
Using FinePixViewer................................. 138
Appendices
System Expansion Option................................. 140
Accessories Guide ............................................ 141
Using Your Camera Correctly ........................... 143
Power Supply and Batteries.............................. 144
Discharging rechargeable batteries .......... 146
Notes on the xD-Picture Card™, the SD
Memory Card and the Internal Memory....... 148
Warning Displays .............................................. 149
Troubleshooting
Troubleshooting ................................................ 153
8
Specifications .................................................
Explanation of Terms .....................................
FUJIFILM Digital Camera Worldwide
Network ....................................................
Safety Notes ..................................................
160
167
169
176
You can use the xD-Picture Card and the SD Memory Card
and the SDHC Memory Card with the FinePix S5700 / FinePix
S700 / FinePix S5800 / FinePix S800. In this Owner’s Manual,
these cards are expressed as “Memory Card”.
Preface
Z Test Shots Prior to Photography
For important photographs (such as weddings and
overseas trips), always take a test shot and view the
image to make sure that the camera is working normally.
• FUJIFILM Corporation cannot accept liability for any
incidental losses (such as the costs of photography or
the loss of income from photography) incurred as a
result of faults with this product.
Z Notes on Copyright
Images recorded using your digital camera system cannot
be used in ways that infringe copyright laws without the
consent of the owner, unless intended only for personal
use. Note that some restrictions apply to the
photographing of stage performances, entertainments
and exhibits, even when intended purely for personal use.
Users are also asked to note that the transfer of Memory
Card containing images or data protected under copyright
laws is only permissible within the restrictions imposed by
those copyright laws.
Z Handling Your Digital Camera
This camera contains precision electronic components.
To ensure that images are recorded correctly, do not
subject the camera to impact or shock while an image is
being recorded.
Z Liquid Crystal
If the LCD monitor is damaged, take particular care with
the liquid crystal in the monitor. If any of the following
situations arise, take the urgent action indicated.
• If liquid crystal comes in contact with your skin
Wipe the area with a cloth and then wash thoroughly
with soap and running water.
• If liquid crystal gets into your eye
Flush the affected eye with clean water for at least 15
minutes and then seek medical assistance.
• If liquid crystal is swallowed
Flush your mouth thoroughly with water. Drink large
quantities of water and induce vomiting. Then seek
medical assistance.
Z Trademark Information
•
and xD-Picture Card™ are trademarks of
FUJIFILM Corporation.
• IBM PC/AT is a registered trademark of International
Business Machines Corp. of the U.S.A.
• Macintosh, Power Macintosh, iMac, PowerBook, iBook
and Mac OS are trademarks of Apple Inc., registered in
the U.S. and other countries.
• Microsoft, Windows, the Windows logo, Windows Vista
and the Windows Vista logo are trademarks or
registered trademarks of Microsoft Corporation in the
United States and/or other countries. Windows is an
abbreviated term referring to the Microsoft® Windows®
Operating System.
* The “Designed for Microsoft® Windows® XP” logo refers
to the camera and the driver only.
• SDHC logo is a trademark.
• Other company or product names are trademarks or
registered trademarks of the respective companies.
Continued Q
9
Preface
Z Notes on Electrical Interference
If the camera is to be used in hospitals or aircrafts, please
note that this camera may cause interference to other
equipment in the hospital or aircraft. For details, please
check with the applicable regulations.
Z Explanation of Color Television System
NTSC:
PAL:
National Television System Committee, color
television telecasting specifications adopted
mainly in the U.S.A., Canada and Japan.
Phase Alternation by Line, a color television
system adopted mainly by European countries
and China.
Z Exif Print (Exif ver. 2.2)
Exif Print Format is a newly revised digital camera file
format that contains a variety of shooting information for
optimal printing.
* See “Using Your Camera Correctly” (➝p.143) for more
information.
10
About this Manual
Icons indicate the modes that are available.
e Macro (Close-up)
Use this mode to take close-up shots.
Available Photography modes:
,
, N, <, M, >
CHECK
,
,
,
,
Press
( ) to select Macro mode.
The Macro mode setting changes each time you press the
( ).
• Focal range
Wide angle:
Approx. 4 cm to 3.0 m (1.6 in. to 9.8 ft.)
Telephoto:
Approx. 60 cm to 3.0 m (2.0 ft. to 9.8 ft.)
• Focal range in Super macro
Approx. 1 cm to 1.0 m (0.4 in. to 3.3 ft.) (Wide-angle
only)
• Effective flash range
Approx. 30 cm to 3.0 m (1.0 ft. to 9.8 ft.)
MEMO
AUTO
N 16
or
appears on the
screen indicating that you
can take close-up shots.
• Use a tripod to prevent camera shake in Macro mode.
• Any of the following cancels Macro mode:
- Changing the Mode dial to
,
or
mode
- Turning the camera off
• If the flash is too bright, use flash brightness adjustment
( P.89).
• Even if
MULTI ( p.87) in the
AF MODE is set,
the camera focuses near the center of the screen.
• AF-assist may not function correctly if the camera is up
close to the subject, such as in macro-mode.
CAUTION
This mark denotes issues that may affect the
camera’s operation.
CHECK
This mark denotes points to notice in the
camera’s operation.
MEMO
This mark denotes additional topics that
complement the basic operating procedures.
Z Usable Memory Cards
You can use the xD-Picture Card, the SD Memory Card and the SDHC Memory Card with the FinePix S5700 / FinePix S700
/ FinePix S5800 / FinePix S800. In this Owner’s Manual, these cards are expressed as “Memory Card”.
Z 4-direction (nopq) button
Illustrations in the Owner’s manual show the FinePix S5700 as an example.
Up, down, left, and right are indicated by black triangles in the Owner’s Manual. Up or down is shown as n or o, and left or
right is shown as p or q.
When pressing q:
When pressing DISP/BACK:
11
Accessories Included
• AA-size Alkaline Batteries (LR6) (4)
• CD-ROM (1)
Software for FinePix CX
• Strap (1)
• Lens cap (1 set)
• A/V cable (1)
• USB cable (1)
12
• Owner’s Manual (this manual) (1)
Camera Parts and Features
• Refer to the pages in parentheses for information on using the camera parts or features.
A Strap mount (p.17)
B Zoom lever (p.36)
C Shutter button
D Power switch (p.25)
E f Continuous shooting button (p.71)
F Mode dial
Continued Q
13
Camera Parts and Features
G AF-assist illuminator (p.36)/Self-timer lamp (p.70)
H ; USB socket/A/V OUT (Audio/Visual output)
socket (p.123)
I DC IN 5V (power input) socket (p.124)
J Auto popup flash (p.67)
K Microphone
L Speaker
M Terminal cover
14
N Viewfinder (EVF)
O Indicator lamp (p.33)
P LCD monitor
Q Tripod mount
R DISP (Display)/BACK button (p.37, 39)
S D Exposure compensation button (p.64, 91)
T Cover lock release button (p.19)
U Battery cover (p.19)
V EVF/LCD (monitor selector) button (p.30)
W w Playback mode button (p.39)
X p (Photo mode) button (p.75, 79)
Y nopq (4-direction) button
Z MENU/OK button
! Slot cover (p.22)
_ Memory Card slot (p.22)
15
Example of screen Text Display
Z Photography mode
N 16
ISO 100
UP
UP
3/31/2007
SET
411 0 0 0
12:00 AM
F3.5
A ( Self-timer (p.69)
B e Macro (close-up) (p.66)
C C Flash (p.67)
D
Photography mode (p.51)
E
Battery level indicator
(p.21)
F
High-speed shooting
(p.84)
G f Continuous shooting
(p.71)
H AF frame (p.31)
I Date/Time (p.26)
J Shutter speed (p.60)
K Aperture (p.58)
L ) Photometry (p.82)
M 9 White balance (p.83)
N ISO 100 Sensitivity (p.79)
O
N Quality mode (p.80)
P Number of available frames
(p.164, 165)
Q
FinePix COLOR (p.81)
R { AF warning (p.149)
S
Camera shake warning
(p.149)
T
Increasing monitor
brightness (p.74)
U Y Internal memory (p.24)
V Exposure compensation
indicator (p.64)
W S Exposure compensation
(p.64)
Z Playback mode
100-0001
100-0001
N
3/31/2007
A w Playback mode (p.39)
B u DPOF (p.93)
C F Protection (p.98)
D # Voice memo (p.102)
E Frame number (p.117)
F
Present (p.39)
12:00 AM
FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix S800 has internal memory that can store images without Memory Card. Y
appears on the screen when the internal memory is active.
16
Attaching the Strap and Lens Cap
Attaching the strap
Pull the lens cap cord through the strap.
Getting Ready
1
3
Attach the strap to the strap mounts on the
camera. Once you have attached both ends
of the strap, check carefully to make sure
that the strap is firmly secured.
CAUTION
• Attach the strap correctly to prevent dropping the
camera.
• Attach the lens cap cord to prevent losing the lens cap.
2
Attach the lens cap cord to the lens cap.
17
Attaching the Strap and Lens Cap
Attaching the lens cap
Attach the lens cap to the lens by pressing in
on both sides of the cap.
18
Loading the Batteries
1
While pressing the cover lock release
button, slide and open the battery cover.
Compatible batteries
AA-size alkaline batteries (4) or AA-size Ni-MH
rechargeable batteries (4) (sold separately)
Getting Ready
Batteries are required to operate the digital camera. At
first, load the batteries in the camera.
CAUTION
• Never use the following types of
batteries, as they could cause
serious problems such as battery Outer casing
fluid leakage or overheating:
1. Batteries with split or peeling
outer casings
2. Combinations of different
types of batteries or new and used batteries together
• Do not use manganese, Ni-Cd or lithium batteries.
• Use the same brand and grade AA-size alkaline
batteries as those supplied with the camera.
CHECK
Check that the camera is turned off before opening the
battery cover.
CAUTION
• Do not open the battery cover while the camera is on.
This could damage the Memory Card or ruin the image
files on the Memory Card.
• Do not apply force to the battery cover.
Continued Q
19
Loading the Batteries
2
Load the batteries correctly as indicated by
the polarity icons.
CAUTION
Match the polarity icons (+ and ,) of the batteries to
those on the inside of the battery cover.
20
3
Press on the battery cover to push the
batteries down. Slide the cover closed.
Checking the battery charge
A There is ample battery charge. (Not displayed)
B There is insufficient charge left in the batteries. The
batteries will soon run out. Have a new set of batteries
ready. (Lit red)
C The batteries are depleted. The display will shortly go
blank and the camera will stop working. Replace or
recharge the batteries. (Blinking red)
• Soil, such as fingermarks on the poles of the batteries,
can shorten time for which the batteries can be used.
• The time for which AA-size alkaline batteries (referred
to hereafter simply as alkaline batteries) can be used
varies depending on the brand. Some brands of alkaline
batteries may stop providing power more quickly than
those supplied with the camera. Note also that due to
their nature, the time for which alkaline batteries can be
used decreases in cold conditions (0°C to +10°C/+32°F
to +50°F). For this reason, it is better to use AA-size NiMH batteries.
• Due to the nature of the battery, the battery level
warning (
, V) may appear early when the
camera is used in cold locations. Try warming the
batteries in your pocket or a similar location before use.
• Depending on the battery type and the level of charge
in the batteries, the camera may run out of power
without first displaying a battery level warning. This is
particularly likely to happen when batteries that have
run out of charge once are re-used.
• Depending on the camera mode, the transition from
to V may occur more quickly.
• Use Fujifilm Battery charger (sold separately) to charge
AA-size Ni-MH batteries.
• See p.144-145 for information on the batteries.
• When first purchased or if left unused for a long period,
the amount of time which AA-size Ni-MH batteries can
be used may be short. See p.145 for more information.
• Battery power consumption varies greatly depending
on use. When you change to Playback mode from
Photography mode,
may not occur, however,
V may suddenly blink red and the camera may stop
operation.
Getting Ready
Turn the camera on and check the battery charge.
Notes on batteries
21
Loading the Memory Card
Although you can store pictures in the camera’s internal
memory, you can store many more images on the
Memory Card (sold separately). You can use the xDPicture Card and the SD Memory Card with the FinePix
S5700 / FinePix S700 / FinePix S5800 / FinePix S800. In
this Owner’s Manual, these cards are expressed as
“Memory Card”.
CAUTION
Do not open the slot cover while the camera is on. This
could damage the Memory Card or ruin the image files on
the Memory Card.
2
Insert a Memory Card.
(xD-Picture Card)
SD / SDHC Memory Cards
Use of the SD Memory Cards listed below is
recommended. They are operation-checked at FUJIFILM
Corporation.
Manufacturer: SanDisk
Gold marking
MEMO
• Compatible models will be updated in our website:
http://www.fujifilm.com/products/digital/
• Depending on the SD Memory Card, recording of
movies may be interrupted.
Use of above mentioned SD Memory Cards are
recommended.
• The camera is not compatible with multimedia cards.
1
Gold contact area
Align the gold marking with the gold contact area,
then insert an xD-Picture Card completely.
(SD Memory Card)
Open the slot cover.
Gold marking
CHECK
Check that the camera is turned off before opening the
slot cover.
22
Gold contact area
Align the gold marking with the gold contact area,
then insert an SD Memory Card completely.
CAUTION
Protection
switch
3
Close the slot cover.
Getting Ready
Be sure to unlock the protection of the SD Memory Card
before inserting it. If it is locked, recording/deleting
images, as well as formatting are not available. To unlock
the protection, slide the switch back, and the SD Memory
Card will work normally.
How to replace the Memory Card
CAUTION
• A new SD Memory Card or a card previously used on a
PC or any device other than the camera should be
formatted (➝p.120) on the camera before use.
• Do not use a miniSD adaptor or a microSD adaptor
which have exposed contact areas on the back. Use of
these adaptors may cause a malfunction or damage
due to the improper contacts.
Push the Memory Card into the slot and then slowly remove
your finger. The lock is released and the Memory Card is
pushed out.
Continued Q
23
Loading the Memory Card
CAUTION
• When storing Memory Cards, make sure that they are
kept out of the reach of children. A Memory Card could
be swallowed and cause suffocation. If a child swallows
a Memory Card, seek medical attention or call
emergency number right away.
• If the Memory Cards is oriented incorrectly, it will not go
all the way into the slot. Do not apply force when
inserting a Memory Card.
• Note that the Memory Cards may spring out if you
release your finger quickly from the card immediately
after the lock is released.
• Operation of this camera is only guaranteed when it is
used with FUJIFILM xD-Picture Card and operationchecked SD Memory Card (➝p.22).
• See p.148 for information on the xD-Picture Card, SD
Memory Card and the Internal Memory.
Z About internal memory
AUTO
3/ 31
31/ 2007 10
10: 00 AM
N 16
FinePix S5700 / FinePix
S700 / FinePix S5800 /
FinePix S800 has internal
memory that can store
images without Memory
Card. Y appears on the
screen when internal
memory is active.
When a Memory Card (sold separately) is inserted
[Record images]: Record images to a Memory Card.
[Playback images]: Playback images in a Memory Card.
When a Memory Card (sold separately) is not inserted
[Record images]: Record images to internal memory.
[Playback images]: Playback images in internal memory.
MEMO
• The size of an image file varies depending on the
subject. For this reason, the number recorded may not
represent the actual number of frames.
• See p.164, 165 for information on the standard number
of available frames.
24
Z About images in the internal memory
Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
DVD-R, CD-R, CD-RW, hard disk, etc.).
It is possible to transfer saved images on the internal
memory to a Memory Card (➝p.99).
Turning On and Off
Slide the Power switch to turn the camera on in
Photography mode.
Slide the Power switch again to turn the camera off.
MEMO Switching between the Photography and
Playback mode
Pressing w when the camera is in Photography mode
switches the camera to the Playback mode. Pressing the
shutter button switches the camera to the Photography
mode.
Turning the camera on in
Playback mode
Press w for about 1 second to turn the camera on in
Playback mode. Pressing w when the camera is in
Playback mode turns the camera off.
Getting Ready
Turning the camera on in
Photography mode
MEMO
Press the shutter button to switch to the Photography
mode.
25
Turning On and Off
Setting the language, date, and
time
2
Set the date and time.
DATE / TIME NOT SET
When using the camera for the first time after purchasing,
the language, date, and time are cleared. Set the
language, date, and time.
1
YY.MM.DD
screen appears when turning
the camera on.
SET
1. 1
12:00
AM
NO
A Press p or q to select Year, Month,
Day, Hour, or Minute.
START MENU
/ LANG.
B Press n or o to correct the setting.
SET
NO
MEMO
A Press n, o, p, or q to select the
language.
B Press MENU/OK to confirm the setting.
26
• Holding down n or o changes the numbers
continuously.
• When the time displayed passes “12”, the AM/PM
setting changes.
MEMO
Change the date format.
DATE / TIME NOT SET
DD . MM . YY
MM / DD / YY
3 / 31 / 2007
YY . MM . DD
SET
10:00
AM
NO
A Press p or q to select the date format.
START MENU screen also appears when the batteries
have been removed and the camera has been left for a
long period. Once the AC power adapter has been
connected or the batteries have been installed for 10
hours or more, the camera settings will be retained for
roughly 24 hours even if both sources of power are
removed.
Getting Ready
3
Auto power off function
When the Auto power off function is active, if the camera
is left unused for 2 or 5 minutes, this function turns the
camera off (➝p.120). To turn the camera back on, slide
the Power switch. To playback images, press w for about
1 second.
B Press n or o to set the format.
C Always press MENU/OK after the settings
are completed.
Date format
ex. March 31, 2007
YY.MM.DD: 2007.3.31
MM/DD/YY: 3/31/2007
DD.MM.YY: 31.3.2007
27
Correcting the Date and Time
1
2
Open the SET-UP menu.
SET - UP
SHOOTING MENU
HIGH-SPEED SHOOTING
SET-UP
Display the DATE/TIME screen.
OFF
DATE / TIME
BEEP VOLUME
SHUTTER VOLUME
PLAYBACK VOLUME
LCD BRIGHTNESS
FORMAT
A Press MENU/OK to open the menu.
A Press p or q to select
B Press n or o to select U SET-UP.
B Press o to move to menu item.
C Press q.
C Press n or o to select
.
DATE/TIME.
D Press q.
See “2 Set the date and time.” (➝p.26).
28
Selecting the Language
2
Open the SET-UP menu.
screen.
SET - UP
SHOOTING MENU
HIGH-SPEED SHOOTING
SET-UP
Display the
Getting Ready
1
OFF
AUTO POWER OFF
TIME DIFFERENCE
BACKGROUND COLOR
DISCHARGE
VIDEO SYSTEM
ENGLISH
2 MIN
NTSC
A Press MENU/OK to open the menu.
A Press p or q to select
B Press n or o to select U SET-UP.
B Press o to move to menu item.
C Press q.
C Press n or o to select
.
.
D Press q.
See “1
screen appears
when turning the camera on.” (➝p.26).
29
Taking Pictures (B AUTO Mode)
This section describes the basic operations.
2
1
Press the EVF/LCD to alternate the display between the
viewfinder (EVF) and the LCD monitor.
Turn the camera on.
Switch the display.
A Slide the Power switch.
EVF
LCD
MEMO
The EVF/LCD selection is retained even when the
camera is off or the mode setting is changed.
B Set the Mode
dial to B.
CHECK
• Focal range
Wide-angle: approx. 30 cm (1.0 ft.) to infinity
Telephoto: approx. 1 m (3.3 ft.) to infinity
• Select e Macro mode to take close-up shots (➝p.66).
30
3
Focus on the main subject in the AF frame
and press the shutter button down halfway.
AUTO
N 16
3/ 31
31/ 2007 10
10: 00 AM
60
AF frame
Halfway
pressed
Do not cover the lens
or flash with your fingers.
F 3.
3 5
Using the Camera
Holding the camera correctly
Brace your elbows against your sides and hold the
camera with both hands.
Using the viewfinder (EVF) allows for a steady arm
position, preventing picture blur.
AF frame
becomes smaller
and camera
focuses on the
subject.
CHECK
CAUTION
• Moving the camera while shooting gives a blurred
picture (camera shake). Hold the camera steadily with
both hands.
• If the lens or flash is obscured by your fingers or the
strap, subjects may be out of focus or the brightness
(exposure) of your shot may be incorrect.
• Focus on the subject
Double beep is heard
Indicator lamp lit green
• Not focus on the subject
No sound
{ indicated
Indicator lamp blinking green
MEMO
• The shutter button has a halfway point at which focus
and exposure are automatically optimized before taking
the picture by pressing fully down.
• When pressing the shutter button halfway, a lens
operation sound may be heard.
Continued Q
31
Taking Pictures (B AUTO Mode)
4
Flash
Press the shutter button fully.
Pressing the shutter button halfway when the flash is not
popped up, camera pops the flash up as required by the
shooting conditions.
Double
beep
Halfway pressed
b appears on the screen.
Click
Fully pressed
CAUTION
When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
MEMO
60
F 3.
3 5
Change the flash mode when you want to take pictures without
flash. See p.67 for information on flash.
32
• When the subject is not in the AF frame, use AF/AE lock
to take the picture (➝p.34).
• When pressing the shutter button down fully in one
motion, the camera takes the picture without the AF
frame changing.
Compatible filters
46 mm-diameter commercial available filters can be attached.
Z Indicator lamp display
The indicator lamp lights or blinks when pressing the shutter
button, etc. The indicator lamp shows the camera status.
• Do not use more than one filter at a time.
• The lens cap (included) may not be used when
attaching the filter.
Using the Camera
CAUTION
Indicator lamp
CAUTION
• The image shown on the screen before the picture is
taken may differ in brightness, color, etc. from the
image actually recorded. Play back the recorded image
to check it (➝p.39).
• When selecting a slow shutter speed that will cause
camera shake,
appears on the screen. Use flash or
a tripod.
• See p.149-152 for information on warning displays. See
“Troubleshooting” (➝p.153-159) for more information.
Display
Status
Lit green
Locking the focus
Blinking green
Camera shake warning, AF warning,
or AE warning (ready to shoot)
Blinking green and
orange alternately
Recording to Memory Card or internal
memory (ready to shoot)
Lit orange
Recording to Memory Card or internal
memory (not ready)
Blinking orange
Charging flash (flash will not fire)
Blinking red
• Warnings for Memory Card and
internal memory
Card not formatted, incorrect format,
memory full, Memory Card or
internal memory error
• Lens operation error
MEMO
Detailed warning messages appear on the screen
(➝p.149-152).
33
Taking Pictures (B AUTO Mode)
Taking pictures with the focus
and exposure locked
Using AF/AE lock
1
AUTO
N 16
Move the camera slightly so that one of the
subjects is in the AF frame.
AUTO
N 16
3/ 31
31/ 2007 10
10: 00 AM
In the above composition, the subjects are not in the AF
frame. Pressing the shutter button halfway at this point
will result in the subjects being out of focus.
AF/AE lock is useful:
Use AF/AE lock to guarantee best result when shooting a
subject that is not suited to autofocusing (➝p.35).
3/ 31
31/ 2007 10
10:00
00 AM
2
Press the shutter button down halfway to
focus on the subject.
Double
beep
60
Halfway
pressed
34
F 3.
3 5
3
Subjects not suitable for autofocus
FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix S800
uses a high-precision autofocusing mechanism. However, it
may have difficulty focusing on the following:
Click
60
Using the Camera
Continue to hold the shutter button down
halfway. Move the camera back to the
original image and press the shutter button
fully.
F 3.
3 5
Very shiny subjects such
as a mirror or car body
Fully pressed
MEMO
• AF/AE lock can be applied repeatedly before the shutter
is released.
• On FinePix S5700 / FinePix S700 / FinePix S5800 /
FinePix S800, pressing the shutter button down halfway
locks the focus and exposure settings (AF and AE lock).
Fast moving subjects
•
•
•
•
•
Subjects photographed through glass
Subjects that do not reflect well, such as hair or fur
Subjects with no substance, such as smoke or flames
Dark subjects
Subjects with little or no contrast between the subject and
the background (such as subjects dressed in the same color
as the background)
• Shots where another high-contrast object (not the subject) is
close to the AF frame and is either closer or further away
than your subject (such as a shot of someone against a
background with strongly contrasting elements)
For such subjects use AF/AE lock (➝p.34) or “MF” Manual
focus mode (➝p.86).
35
Taking Pictures (B AUTO Mode)
AF-assist illuminator
Using zoom function
Use this illuminator to focus on the subject in dimly lit
conditions.
When pressing the shutter button down halfway, the
camera fires the AF-assist illuminator (orange) while
focusing on your subject.
Use the zoom dial to take pictures with zoom function.
The zoom bar appears on the screen while the zoom dial
is being used.
T: tele zoom dial
(zoom in)
AUTO
W: wide zoom dial
(zoom out)
N 16
N 16
AUTO
AF-assist
illuminator
zoom bar
MEMO
• Even when the AF-assist illuminator fires, the camera
may have difficulty focusing in some conditions.
• The camera focuses most easily when a picture is taken
at a distance of around 2.4 m (7.9 ft.) with wide-angle or
telephoto.
• Even though there is no danger to safety, do not expose
it directly in someone’s eyes.
• When using the AF-assist illuminator in Macro mode,
the camera may have difficulty focusing to take closeup shots.
• See p.113 for information on turning the AF-assist
illuminator off.
• AF-assist illuminator does not fire in ,, .,
,
,
,
, or
mode.
CHECK
Optical zoom focal length (35 mm camera
equivalent)
Approx. 38 mm to 380 mm Max. zoom scale: 10×
36
Adjusting the shot composition
MEMO
• Select e Macro mode to take close-up shots (➝p.66).
• Use digital zoom when you want to shoot the subject
closer (➝p.118).
Select the screen display.
Press DISP/BACK to change the screen display.
Using the Camera
AUTO
N 16
3/ 31
31/ 2007 10
10:00
00 AM
Text displayed
No text displayed
N 16
AUTO
3/ 31
31/ 2007 10
10:00
00 AM
Post shot assist window
displayed
Framing guideline
displayed
Continued Q
37
Taking Pictures (B AUTO Mode)
Z Format of post shot assist window
Best framing
Position the main subject at
the intersection of two lines
in this frame or align one of
the horizontal lines with the
horizon. Use this frame as a
guide to the subject’s size
and the balance of the shot
while composing a shot.
AUTO
N 16
3 / 31
3/
31/ 2007 10
10:00
00 AM
MEMO
Always use AF/AE lock when composing a shot. The
image may be out of focus if AF/AE lock is not used.
Post shot assist window
Up to the last 3
photographed images
appear on the post shot
assist window. This serves
as a guide for taking other
shots with similar
compositions.
38
MEMO
Any of the following clears the image in the post shot
assist window:
• Setting the camera to Playback mode
• Turning the camera off
• Using the PictBridge function (➝p.125)
• Connecting to a PC (➝p.135) etc.
Viewing the Images
Playback your images to check them. For important
photographs, always take a test shot and view the image
to make sure that the camera is working normally.
Select the screen display.
Press DISP/BACK during Playback mode to change the
screen display.
Using the Camera
Setting the camera to Playback
mode
Press w during shooting to change to Playback mode.
100- 0001
100
N
When the camera is off, press w for about 1 second to
turn the camera on in Playback mode.
3/ 31
31/ 2007 10
10: 00 AM
Text displayed
No text displayed
MEMO
Press w to play back the last shot.
CAUTION Still images viewable on
FinePix S5700 / FinePix S700 / FinePix S5800 /
FinePix S800
This camera will display still images recorded on FinePix
S5700 / FinePix S700 / FinePix S5800 / FinePix S800 or
still images (excluding some uncompressed images)
recorded on any FUJIFILM digital camera that supports
xD-Picture Cards or SD Memory Cards. Clear playback
or playback zooming may not be possible for still images
shot on cameras other than FinePix S5700 / FinePix S700
/ FinePix S5800 / FinePix S800.
When playing back images shot with a camera other than
FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix
S800,
a present icon appears on the screen.
20073/2929
3/30
30
3/31
31
1/11
Sorting by date
39
Viewing the Images
Single-frame playback
100-0001
100
0001
N
Playback zoom
1
Zoom in / Zoom out.
To zoom in an image during single-frame playback:
W: wide zoom dial
(zoom out)
T: tele zoom dial
(zoom in)
3/ 31
31/ 2007 10
10: 00 AM
To select the required image:
Press p: last image
Press q: next image
Zoom bar
Selecting images
To select images on the
thumbnail lists screen, hold
down p or q for 1 second
during playback.
When releasing p or q,
camera returns to singleframe playback.
40
Turn to W or T to zoom in or out of an
image.
MEMO
Press DISP/BACK to cancel playback zoom.
2
Display another part of the image.
Z Zoom scales (FinePix S5800 / FinePix S800)
Quality mode
Press n, o, p, or q to display another
part of the image.
Approx. 5.1×
% (3264 × 2176 pixels)
Approx. 5.1×
4 (2304 × 1728 pixels)
Approx. 3.6×
2 (1600 × 1200 pixels)
Approx. 2.5×
* Zoom cannot be performed when the images recorded
by ` are played back.
Sorting by date
MEMO
Press DISP/BACK to return to the zoom setting.
Z Zoom scales (FinePix S5700 / FinePix S700)
Quality mode
Approx. 5.1×
i N (3264 × 2448 pixels)
Using the Camera
Navigation screen
(Current displayed
image)
Max. zoom scale
i F (3264 × 2448 pixels)
Max. zoom scale
F (3072 × 2304 pixels)
Approx. 4.8×
N (3072 × 2304 pixels)
Approx. 4.8×
% (3072 × 2048 pixels)
Approx. 4.8×
4 (2304 × 1728 pixels)
Approx. 3.6×
2 (1600 × 1200 pixels)
Approx. 2.5×
In sorting by date mode, you can view all images taken on
the same day.
2007
3 / 29
3 / 30
3 / 31
1 / 11
A Press n, o, p, or q to move the cursor
(colored frame) to the selecting frame.
B Press MENU/OK to enlarge the image.
Continued Q
41
Viewing the Images
Selecting the date
2007
3 / 29
3 / 30
3 / 31
Multi-frame playback
Use this function to display a single frame, 2 frames or 9
frames. You can compare and select images using the
Multi-frame display. Use the zoom dial to change the
display.
100-0001
N
11
A Press n, o, p, or q to move the cursor
(colored frame) to
on the upper left
frame.
B Press p to display the selecting date.
C Press n or o to move the cursor (colored
frame) to select the date.
Press n or o repeatedly to jump to the
next page.
D Press q.
42
3/
3 31
31/ 2007 10:
10 00 AM
2 frames playback
Using the Camera
A Press n, o, p or q to select the
images you want to compare (such as the
images taken in
NATURAL & d
mode).
B Press MENU/OK to enlarge the image.
9 frames playback
A Press n, o, p or q to change the
colored frame and select an image.
Press n or o repeatedly to jump to the
next page.
B Press MENU/OK to enlarge the image.
43
Erasing the Images/Movies
Use this mode to erase unnecessary images or movies to
have ample free space on the Memory Card or internal
memory. Your camera calls images “frames”.
Using the erase button (
Pressing
/n)
(n) erases images easily.
ERASE OK?
OK
PLAYBACK MENU
ERASE
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO
TRIMMING
BACK
FRAME
ALL FRAMES
A Press MENU/OK to open the PLAYBACK
MENU.
A Press p or q to select the erasing
image.
(n).
C Press p or q to select OK.
D Press MENU/OK to erase the displayed
image.
44
Erasing the images using
Playback menu
CANCEL
SET
B Press
Setting the camera to w
Playback mode (➝p.39)
B Press n or o to select
ERASE.
C Press q.
D Press n or o to select FRAME or ALL
FRAMES.
E Press MENU/OK to confirm the setting.
Setting the camera to w playback mode (➝p.39)
Erasing one frame at a time (FRAME)
Erasing all frames (ALL FRAMES)
ERASE OK?
OK
YES
CANCEL
Using the Camera
ERASE ALL OK?
IT MAY TAKE A WHILE
CANCEL
SET
A Press p or q to select the erasing frame
(file).
A Press p or q to select OK.
B Press MENU/OK to erase the currently
displayed frame (file).
B Press MENU/OK to erase all the frames
(files).
MEMO
MEMO
To erase another frame (file), repeat above steps.
When erasing frames (files) is completed, press DISP/
BACK.
Press DISP/BACK to cancel
erasing of all the frames
(files). Some unprotected
frames (files) will be left
unerased.
CAUTION
Pressing MENU/OK repeatedly erases consecutive
frames (files). Take care not to erase a frame (file) by
mistake.
CANCEL
Continued Q
45
Erasing
Erasing
the the
Images/Movies
Images/Movies
MEMO
• When using a Memory Card, the images in the Memory
Card are erased. When not using a Memory Card, the
images in the internal memory are erased.
• Protected frames (files) cannot be erased. Unprotect
the frames (files) before erasing them (➝p.98).
• If “DPOF SPECIFIED. ERASE OK?” or “DPOF
SPECIFIED. ERASE ALL OK?” appears, press MENU/
OK again to erase the frames (files).
CAUTION
Erased frames (files) cannot be recovered. Back up
important frames (files) onto your PC or another media.
46
Setting the camera to w playback mode (➝p.39)
Using the Photography Functions — Procedure of Setting
Specify the camera settings for taking pictures to get the
best result. A general guide is given below.
1
Select the Photography mode.
Picture
Stabilization
This is the easiest mode for taking
pictures (➝p.51).
Used for selecting a fast shutter speed
that reduces camera shake and movingsubject blurring (➝p.51).
Natural light
This mode produces beautiful images
that retain the natural ambience when
shots are taken in low-light conditions
(➝p.52).
NATURAL
&d
This mode shoots 2 images continuously
without flash and with flash. Shooting with
flash allows you to take a picture of a
main subject brightly. This mode is useful
for shooting 2 different types of pictures at
the same time (➝p.52).
CAUTION
,
Scene position
Use to select the ideal setting from Scene
position menu for the shot. (➝p.53).
When you have been used for long periods in places
subject to extreme temperature rises, it will lower your
image quality and streaking may also be visible in your
images. If this occurs, turn the camera off several times to
prevent heating the camera.
N Program AE
< Aperturepriority AE
M Shutterpriority AE
Used for changing the aperture or shutter
speed setting so that the action is frozen,
the flow of the motion is conveyed, or the
background is out of focus (➝p.57-61).
> Manual
All manual settings for taking pictures
(➝p.62).
r Movie
Use for shooting movies (➝p.107).
Advanced Features — Photography
Turn the Mode dial to select the Photography mode.
The camera settings are tailored to the scene being
shot.
B Auto
Continued Q
47
Using the Photography Functions — Procedure of Setting
2
Specify the photography settings.
Pressing buttons or selecting menu allows you to
specify photography functions. You can obtain the
best result for shooting.
e (p)
Macro button
d (q)
Flash button
* (o)
Self-timer button
D
Exposure
compensation
button
f
Continuous
shooting button
48
Z Specifying functions using buttons
e Macro
Used for close-up shots (➝p.66).
d Flash
Used for shots in dark locations or for
backlit subjects, etc. (➝p.67).
* Self-timer
Used in situations such as group shots
where the photographer is included in the
shot (➝p.69).
f Continuous
Used to take a series of continuous shots
or to use auto bracketing (with exposure
compensation) (➝p.71).
D Exposure
Used for changing the image brightness
compensation (➝p.64).
Z Specifying functions using p-MODE MENU (p
button)
Press p button for about 0.5 seconds to open the pMODE MENU.
Z Specifying functions using SHOOTING MENU
(MENU/OK button)
MODE MENU
ISO
QUALITY
COLOR
AUTO
N
STD
PHOTOMETRY
WHITE BALANCE
AUTO
HIGH - SPEED SHOOTING OFF
FOCUSING
AF MODE
STD
SHARPNESS
Advanced Features — Photography
SHOOTING MENU
Continued Q
S ISO
Use to specify required sensitivity
setting (➝p.79).
QUALITY
Use to specify required image size
(➝p.80).
FinePix COLOR
Use to specify required color tone
(➝p.81).
49
Using the Photography Functions — Procedure of Setting
SCENE
POSITION
PHOTOMETRY
TWHITE
BALANCE
HIGH-SPEED
SHOOTING
H FOCUSING
Use to select light metering method
(set the Mode dial to N, <, M or >)
(➝p.82).
Use to adjust the color tone (only N,
<, M, >) (➝p.83).
Use to focus the shot quickly (➝p.84).
Use to specify focusing mode (set the
Mode dial to N, <, M, or >) (➝p.85).
AF MODE
Use to specify focusing area (set the
mode dial to N, <, M, or >) (➝p.87).
G SHARPNESS
Use this setting to soften or
emphasize the outline and quality of
an image (only N, <, M, >) (➝p.89).
FLASH
(Brightness
Adjustment)
Use this setting to adjust the amount
of light emitted by the flash to suit the
photography conditions or to achieve
a desired effect (only N, <, M, >)
(➝p.89).
BRACKETING
Use this setting to photograph the
same image with different exposure
settings (only N, <, M, >) (➝p.90).
U SET-UP
50
Use to select the best setting for the
scene being shot. Choose from 12
types of scene (set the Mode dial to
or
)(➝p.53).
Use to change the camera settings
(➝p.113).
Setting the Shooting Mode
Picture Stabilization
You can select the most suitable setting according to the
subject by selecting one of the Shooting modes.
Use this mode to select a fast shutter speed that reduces
camera shake and moving-subject blurring.
B Auto
Set the Mode dial to
.
Camera specifies all settings other than p-MODE
(Quality and FinePix COLOR) automatically.
CHECK
Set the Mode dial to B.
• Available flash modes:
AUTO, b, d, C
• Only AUTO can be selected for the
setting.
ISO (sensitivity)
Advanced Features — Photography
This is the easiest mode for providing crisp and clear
shots.
Use this mode for ordinary photography.
CHECK
• Available flash modes:
AUTO, b, d, C
• Only AUTO can be selected for the
setting.
ISO (sensitivity)
51
Setting the Shooting Mode
NATURAL & d
Natural Light
This mode produces beautiful images that retain the
natural ambience when shots are taken in low-light
conditions.
This mode is also ideal for shooting indoor or situations
where the flash cannot be used.
Camera sets the high-sensitivity setting when selecting
the Natural light mode. This mode is effective for reducing
camera shake and moving-subject blurring when taking
pictures in low-light conditions.
Set the Mode dial to
This mode shoots 2 images continuously without flash
and with flash. Shooting with flash allows you to take a
picture of a main subject brightly. Shooting without flash
produces beautiful images that retain the natural
ambience. This mode is useful for shooting 2 different
types of pictures at the same time.
Set the Mode dial to
.
.
When pressing the shutter button, first picture is taken
without flash and next picture is taken with flash.
Always 2 pictures are taken per 1 shot.
Do not move the camera until the shooting ended.
CHECK
• Flash cannot be used in the Natural light mode.
• Only AUTO can be selected for the
ISO (sensitivity)
setting.
MEMO
This mode helps to avoid failed shots that may occur
when using other Shooting modes when taking a picture
against the sun, etc.
CHECK
• Flash fires automatically. Do not use this mode at
situations where the flash cannot be used.
• Only AUTO can be selected for the
ISO (sensitivity)
setting.
• When there is insufficient space on the Memory Card or
internal memory for 2 shots, a picture cannot be taken.
• Continuous shooting is disabled when setting
.
52
,
Z Selecting Scene position setting
SCENE POSITION
This mode provides the best Scene position setting for the
scene being shot. Choose from 12 types of scene.
Select the Scene position setting in the SCENE
POSITION menu.
or
Portrait with soft
overall tone and
beautiful skin tones
SET
CANCEL
A Press MENU/OK to open the menu.
About
and
of the Mode Dial
The camera enables to set the scene position for
and
separately.
For example, select H for
and , for
separately at
traveling. The setting combination can be used for variety of
shooting scene. The menu options of
and
are the
same. However the options cannot be set for both
and
.
MEMO
•
•
•
•
•
B Press n or o to select
POSITION.
SCENE
C Press q.
Advanced Features — Photography
Set the Mode dial to
.
PORTRAIT
LANDSCAPE
SPORT
NIGHT
D Press n or o to select the setting.
E Press MENU/OK to confirm the setting.
and
are set to H and , as factory default
settings.
See p.68 for information on the available flash modes.
p-CHROME (➝p.81) cannot be set.
AF-assist illuminator does not fire in ,, .,
,
,
,
and
mode.
Only AUTO can be selected for the
ISO (sensitivity)
setting.
53
Setting the Shooting Mode
m PORTRAIT
. SPORT
Use this mode for
photography to get beautiful
skin tones and soft overall
tone.
Use this mode to take
pictures of a moving
subject.
It gives priority to faster
shutter speeds.
CHECK
, LANDSCAPE
Use this mode for shooting
scenery in daylight and
provides crisp, clear shots of
scenery such as buildings
and mountains.
When setting . Sport mode, the camera sets to
High-speed shooting mode (➝p.84) automatically.
8 NIGHT
Use this mode for shooting
evening and night scenes.
A picture is taken with a slow
shutter of up to 3 seconds.
CHECK
Flash cannot be used in the Landscape mode.
CHECK
Use a tripod to prevent camera shake, because a picture
is taken with a slow shutter.
54
FIREWORKS
SUNSET
Use this mode to shoot
fireworks.
It is effective for taking
more vivid shots of
fireworks with a slow
shutter.
Use this mode to shoot
sunset, making the colors
more vivid.
Advanced Features — Photography
CHECK
• Flash cannot be used in the Fireworks mode.
• Shutter speed setting: 1/2 sec. to 4 sec.
• Use a tripod to prevent camera shake in the Fireworks
mode.
Z Selecting the exposure time setting
N 16
SETTING EXPOSURE TIME
2"
A Press D to open the setting screen.
SNOW
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at snowy
scene where the whole
screen appears white.
BEACH
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at beach
under strong sunlight.
B Press n or o to select the exposure time.
Continued Q
55
Setting the Shooting Mode
MUSEUM
Use this mode for taking
pictures in places such as
museum where the use of
flash and making an
operation sound and a
shutter sound are
restricted.
Flash mode is forcibly set
to Suppressed flash, and
operation sound, shutter sound, and the AF-assist
illuminator/self-timer lamp are off.
MEMO
Check whether photography is permitted before using this
mode.
FLOWER
Use this mode to take
clear close-up shots when
zooming up a flower.
It is effective for taking
more vivid shots of flower
petal.
CHECK
• Flash cannot be used in the Flower mode.
• Focal range
Wide angle:
Approx. 4 cm to 3.0 m (1.6 in. to 9.8 ft.)
Telephoto:
Approx. 60 cm to 3.0 m (2.0 ft. to 9.8 ft.)
TEXT
PARTY
Use this mode for shooting
at indoor wedding and
party.
This mode produces
beautiful images that retain
the natural ambience when
shots are taken in low-light
conditions.
56
Use this mode to shoot
documents and white
board.
It is effective for taking
clearer shots of letters.
CHECK
Focal range
Wide angle:
Approx. 4 cm to 3.0 m (1.6 in. to 9.8 ft.)
Telephoto:
Approx. 60 cm to 3.0 m (2.0 ft. to 9.8 ft.)
N Program AE
A Press D to open the setting screen.
This is an automatic mode to specify the settings except
for the shutter speed and aperture setting.
This is a simple way to take pictures the same as the <
Aperture-priority Auto and M Shutter-priority Auto modes
(Program shift).
B Select different shutter speed and aperture
setting combinations without changing the
exposure setting.
C Press the shutter button to take pictures.
MEMO
Photography functions:
•
PHOTOMETRY (➝p.82)
• T WHITE BALANCE (➝p.83)
• H FOCUSING (➝p.85)
•
AF MODE (➝p.87)
• G SHARPNESS (➝p.89)
•
FLASH (➝p.89)
•
BRACKETING (➝p.90)
• Program shift can be used when C SUPPRESSED
FLASH (➝p.67) is set in flash mode.
• The shutter speed and aperture setting appear in yellow
when the camera is in Program shift mode.
• Any of following cancels Program shift:
- Changing the Mode dial setting
- Switching the flash setting
- Setting the camera to Playback mode
- Turning the camera off
CHECK
Available flash modes
AUTO, b, d, C, c, n
CAUTION
N 16
Z Program shift
ISO 100
N 16
ISO 100
SET
60
Advanced Features — Photography
Set the Mode dial to N.
• When the brightness of the
subject is outside the camera’s
brightness metering range, “---”
appears as the shutter speed
and aperture setting on the
screen.
PROGRAM SHIFT
F3. 5
F3
57
Setting the Shooting Mode
< Aperture Priority AE
Z Setting the aperture
This is an automatic mode to set the aperture.
Use this mode to have the area in front of and behind the
subject out of focus (large aperture) or have both near
and far subjects in focus (small aperture).
N 16
ISO 100
Set the Mode dial to <.
1000
SETTING APERTURE
F3. 5
F3
Aperture
A Press D to open the setting screen.
Photography functions:
•
PHOTOMETRY (➝p.82)
• T WHITE BALANCE (➝p.83)
• H FOCUSING (➝p.85)
•
AF MODE (➝p.87)
• G SHARPNESS (➝p.89)
•
FLASH (➝p.89)
•
BRACKETING (➝p.90)
B Press n or o to select the aperture.
C Press the shutter button to take pictures.
CHECK
Available flash modes
b, d, C, c, n
CHECK
Aperture settings
F3.5 to F6.8 in 1/3 EV increments
F6.8/F13.6 in 2 EV increments
58
CAUTION
N 16
ISO 100
4
F8
Lit red
N 16
ISO 100
By adjusting the aperture, you can change the depth of focus
(depth of field). Selecting a larger number of aperture (closed)
obtains a larger depth of focus. Selecting a smaller number of
aperture (open) has the area in front of and behind the subject
out of focus.
Closed
When the brightness of the
subject is outside the camera’s
brightness metering range,
“----” appears as the shutter
speed.
F8
The area in front of and
behind the subject is also in
focus in the shot.
Main subject
Open
SET
----
Aperture
The area in front of and
behind the subject is out of
focus.
Advanced Features — Photography
SET
4
When the correct exposure
cannot be obtained with
selected aperture setting, the
shutter speed appears in red.
When this occurs, adjust the
aperture setting again.
When d FORCED FLASH is
set, you can take a picture with
a shutter speed of up to 1/45
sec.
59
Setting the Shooting Mode
M Shutter Priority AE
Z Setting the shutter speed
This is an automatic mode to set the shutter speed.
Use this mode to freeze a moving subject (fast shutter
speed) or convey the impression of movement (slow
shutter speed).
N 16
ISO 100
Shutter speed
Set the Mode dial to M.
1000
SETTING SHUTTER SPEED
F3. 5
F3
A Press D to open the setting screen.
Photography functions:
•
PHOTOMETRY (➝p.82)
• T WHITE BALANCE (➝p.83)
• H FOCUSING (➝p.85)
•
AF MODE (➝p.87)
• G SHARPNESS (➝p.89)
•
FLASH (➝p.89)
•
BRACKETING (➝p.90)
B Press n or o to select the shutter speed.
C Press the shutter button to take pictures.
CHECK
Available flash modes
b, d, C
60
CHECK
Shutter speed setting
4 sec. to 1/1000 sec. in 1/3 EV increments
CAUTION
Shutter speed
N 16
ISO 100
F3.5
F3
200
F3. 5
F3
When shooting a moving subject, you can either “freeze the
motion” or “capture the sense of movement” by adjusting the
shutter speed.
Fast
Freezes the motion of the
subject.
Slow
Photographs the traces left
by the subject’s movement.
Lit red
N 16
ISO 100
SET
50
F---- -
When the brightness of
the subject is outside the
camera’s brightness
metering range, “F---”
appears as the aperture
setting. When this
occurs, press the shutter
button down halfway to
measure the light level
again.
Advanced Features — Photography
SET
When the correct
exposure cannot be
obtained with selected
shutter speed, the
aperture setting appears
in red. When this occurs,
adjust the shutter speed
again.
61
Setting the Shooting Mode
> Manual
Z Setting the shutter speed
This is a shooting mode that allows for settings including
the shutter speed and aperture.
Set the Photography functions to manual to easily control
yourself.
N 16
ISO 100
Set the Mode dial to >.
1000
SET SHUTTERSPEED,APERTURE
F3. 5
F3
Shutter speed
A Press D to open the setting screen.
Photography functions:
•
PHOTOMETRY (➝p.82)
• T WHITE BALANCE (➝p.83)
• H FOCUSING (➝p.85)
•
AF MODE (➝p.87)
• G SHARPNESS (➝p.89)
•
FLASH (➝p.89)
•
BRACKETING (➝p.90)
B Press n or o to select the shutter speed.
C Press the shutter button to take pictures.
CHECK
Available flash modes:
b, d, C
CHECK Shutter speed setting
4 sec. to 1/1000 sec. in 1/3 EV increments
MEMO
• Use a tripod to prevent camera shake.
• In shots with long exposures, noise (dots) may appear
on the image.
CAUTION
If the shutter speed is set to a speed 1/1000 sec.,
smearing (white stripes) may appear in the image
(➝p.167).
62
Z Setting the aperture
The exposure indicator
N 16
ISO 100
N 16
ISO 100
Aperture
SET SHUTTERSPEED,APERTURE
F3. 5
F3
SET
1000
A Press D to open the setting screen.
B Press p or q to select the aperture.
F3. 5
F3
Advanced Features — Photography
1000
Use the exposure indicator
on the screen as a guide
when setting the
exposure.When the
brightness of the subject is
outside the camera’s
brightness metering range,
the exposure indicator
disappears on the screen.
C Press the shutter button to take pictures.
CHECK Aperture settings
F3.5 to F6.8 in 1/3 EV increments
F6.8/F13.6 in 2 EV increments
MEMO
Explanation of Terms “EV” (➝p.167).
63
Adjusting the Image Brightness (D Exposure Compensation)
Use this menu for shots to get the correct brightness
(exposure), such as shots with extremely high contrast
between the subject and the background.
Available Photography modes: N, <, M (➝p.57, 58,
60)
Adjusting exposure
compensation
Press D to display the exposure compensation setting
screen.
N 16
ISO 100
Exposure Compensation
indicator
SET
60
F3. 5
F3
A Press D to open the setting screen.
B Press p or q to set the compensation
value.
C Press D to confirm the setting.
CAUTION
D Press the shutter button to take pictures.
This function can only be used for N, <, or M in Shooting
mode.
CHECK
• The symbol indicating the compensation direction (– or
+) turns yellow.
• The S icon also turns yellow while exposure
compensation is being set and then turns blue after
setting is completed.
• The screen brightness will increase or decrease
depending on the exposure compensation setting.
64
positive (+) compensation
• Backlit portraits: +2 steps to
+4 steps (+2/3 EV to +1 1/3
EV)
• Very bright scenes (such as
snowfields) and highly
reflective subjects: +3 steps
(+1 EV)
CHECK
• Compensation range: –2 EV to +2 EV
(13 steps in 1/3 EV increments)
• Explanation of Terms “EV” (➝p.167)
MEMO
• This setting is retained when the mode is changed or
the camera is turned off (S icon appears). Set the
exposure compensation to “0” unless compensation is
required.
• Any of the following disables exposure compensation:
- Using the flash in AUTO or b mode
- Shooting dark scenes in d mode
Advanced Features — Photography
negative (–) compensation
Guide to compensation
• Shots made up predominantly of sky: +3 steps (+1 EV)
• Spotlit subjects, particularly against dark backgrounds: –2
steps (–2/3 EV)
• Scenes with low reflectivity, such as shots of pine trees or
dark foliage: –2 steps (–2/3 EV)
65
e Macro (Close-up)
Use this mode to take close-up shots.
Available Photography modes: B,
,
, N, <, M, >
CHECK
,
,
,
Press e (p) to select Macro mode.
The Macro mode setting changes each time you press the
e (p).
• Focal range
Wide angle:
Approx. 4 cm to 3.0 m (1.6 in. to 9.8 ft.)
Telephoto:
Approx. 60 cm to 3.0 m (2.0 ft. to 9.8 ft.)
• Focal range in Super macro
Approx. 1 cm to 1.0 m (0.4 in. to 3.3 ft.) (Wide-angle
only)
• Effective flash range
Approx. 30 cm to 3.0 m (1.0 ft. to 9.8 ft.)
MEMO
AUTO
N 16
e or > appears on the
screen indicating that you
can take close-up shots.
CAUTION
Super macro cannot be used when
is set.
66
NATURAL & d
• Use a tripod to prevent camera shake in Macro mode.
• Any of the following cancels Macro mode:
- Changing the Mode dial to
,
or r mode
- Turning the camera off
• If the flash is too bright, use flash brightness adjustment
(➝P.89).
• Even if
MULTI (➝p.87) in the
AF MODE is set,
the camera focuses near the center of the screen.
• AF-assist may not function correctly if the camera is up
close to the subject, such as in macro-mode.
d Setting the Flash (Intelligent Flash)
Flash photography is useful for taking pictures at night or
indoor dark locations. Choose from 6 flash modes
according to the type of shot. See p.68 for information on
the available Photography modes.
MEMO
d FORCED FLASH
Use this mode in backlit scenes, or to get the correct
colors when taking a picture under bright lighting.
In this mode, the flash fires in bright as well as dark
conditions.
C SUPPRESSED FLASH
This mode is suitable for situations where the flash cannot
be used.
Use a tripod to prevent camera shake when shooting in
Suppressed flash mode in the dark condition.
Any time, flash does not fire.
The flash setting changes
each time you press d (q).
MEMO
When pressing the shutter button down halfway, b
appears on the screen before the flash fires.
AUTO Auto flash (not displayed)
Use this mode for ordinary photography.
The flash fires as required by the shooting conditions.
b RED EYE REDUCTION
This mode is suitable for shooting portraits in
low-light conditions.
Use this mode to minimize red-eye (eyes
appear in red in the finished photo).
Advanced Features — Photography
By calculating subject distance and brightness, the camera
automatically adjusts the flash amount and sensitivity to
suit shooting conditions. This maintains consistent balance
of bright/dark areas across the image in low-light
conditions (dimly-lit room, etc). The Intelligent Flash feature
guarantees consistent results when using the flash.
MEMO Red-eye effect
When using the flash to take a picture of people in lowlight conditions, their eyes sometimes appear red in the
picture. This is caused by the light of the flash reflecting
off the inside of the eye.
c SLOW SYNCHRO,
n RED EYE & SLOW
This mode allows you to take pictures of people at night
that clearly show both your subjects and the night time
backdrop. To prevent camera shake, always use a tripod.
Using n synchronizes Red-eye reduction mode.
Using 8 selects slow shutter speeds of up to 3 seconds.
CAUTION
In bright scenes, overexposure may occur.
Continued Q
67
d Setting the Flash (Intelligent Flash)
CHECK
CHECK
List of available flash modes in each Photography mode
Effective flash range (S : 800)
Approx. 50 cm to 6.2 m (1.6 ft. to 20 ft.)
If you take pictures outside of the effective flash range,
the image may appear dark even if the flash is used.
B
AUTO
b
d
C
✓
✓
✓
✓
✓
✓
✓
✓
c
n
CAUTION Notes on using flash
✓
m
✓
✓
✓
✓
✓
.
✓
✓
✓
✓
✓
✓
,
✓
✓
✓
✓
8
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
• If the shutter speed is set to a speed faster than 1/1000
sec., the image may appear dark even if the flash is
used.
• If pressing the shutter button while the flash is charging
(indicator lamp blinking orange), the picture will be
taken without the flash (when using AUTO and b).
• The flash charging time may increase when the
batteries are low on charge.
• When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
• The flash fires several times (pre-flashes and the main
flash). Do not move the camera until the picture is
taken.
✓
Popping the flash up automatically
✓
✓
✓
✓
✓
✓
✓
✓
✓
<
✓
✓
✓
✓
✓
M
✓
✓
✓
>
✓
✓
✓
N
68
✓
The flash pops up
automatically and fires as
required by the shooting
conditions. Set to C
Suppressed flash mode
when you want to take
pictures without flash.
* Self-Timer
The self-timer is used in situations where the
photographer is included in the shot.
Available Photography modes: All
Setting self-timer
1
Press the shutter button down halfway to
focus on the subject and press the shutter
button fully.
Double
beep
Halfway pressed
AUTO
N 16
OFF
The last displayed setting
is the selected mode.
:The picture is taken
after 10 seconds.
(: The picture is taken
after 2 seconds.
Beep
Fully pressed
Pressing the shutter button down halfway that focuses
on the subject.
Without releasing the shutter button, press the button
all the way down (fully pressed) to start the self-timer.
Advanced Features — Photography
The self-timer setting changes each time you press *
(o).
Taking pictures using self-timer
Continued Q
69
* Self-Timer
2
Take pictures in selected time.
A picture is taken after the self-timer lamp changes from
lit to blinking (only blinks with the 2-second self-timer).
Using the 2-second self-timer
This is useful when you worry about camera shake even if
attaching the camera on a tripod.
MEMO
• To stop the self-timer, once it has started running, press
DISP/BACK.
• Any of the following cancels the self-timer setting:
- Completing the shooting
- Changing the Photography mode setting
- Setting the camera to Playback mode
- Turning the camera off
• Take care not to stand in front of the lens when pressing
the shutter button as this can prevent the correct focus
or brightness (exposure) from being achieved.
9
70
A countdown appears on
the LCD monitor indicating
the time remaining until the
picture is taken.
f Taking pictures continuously
Use this mode to take pictures of a moving subject.
CONTINUOUS
OFF
TOP3
f: TOP 3 continuous shooting
j: Auto bracketing
h: LONG PERIOD continuous shooting
• Shooting continues as long as holding the shutter
button down. In auto bracketing mode however, just
press the shutter button once to shoot 3 frames.
• Number of available frames is limited depending on the
available space on the Memory Card or internal
memory. When auto bracketing, if there is insufficient
space on the Memory Card or internal memory to
record 3 frames, no pictures are taken.
• The focus is determined in the first frame and cannot be
changed in mid-sequence (except for LONG PERIOD).
• The exposure is determined in the first frame, but in
LONG PERIOD continuous shooting the exposure is
adjusted for the scene being shot.
• The speed of continuous shooting varies depending on
the shutter speed.
• The flash cannot be used as the flash mode is set to C
SUPPRESSED FLASH (➝p.67). However, when the
mode is changed back to normal photography, the flash
setting specified before continuous shooting was
selected is restored.
• For TOP 3 continuous shooting and Auto bracketing,
the results are always displayed after you shoot. Note
that pictures taken using LONG PERIOD continuous
shooting are recorded without displaying the results.
• In LONG PERIOD continuous shooting mode, only 1
frame can be shot when using the LONG PERIOD
continuous shooting mode and Self-timer mode
together.
• Continuous shooting cannot be selected in
NATURAL & d.
• File recording time using TOP3 or Auto bracketing may
increase when record to a Memory Card or internal
memory.
Advanced Features — Photography
Hold down f. Press n or o to select
the Continuous shooting mode.
Release f to confirm your selection.
CAUTION
Continued Q
71
f Taking pictures continuously
f TOP 3 continuous shooting
Available Photography modes: All (except for
STORING
j Auto bracketing
)
Shooting continues as long as
holding the shutter button
down. This mode shoots up to
3 frames.
(FinePix S5700 / FinePix
S700: max. 1.4 frames/sec.)
(FinePix S5800 / FinePix
S800: max. 1.3 frames/sec.)
Available Photography modes: N, <, M, >
This mode shoots the same
image with different exposure
settings.
Bracketing shoots 3
continuous frames, each with
a different exposure setting.
is correctly exposed,
is overexposed and
is
underexposed.
The exposure range settings
can be changed in
Bracketing in the SHOOTING
MENU.
STORING
CHECK
Auto bracketing settings (3) ±1/3 EV, ±2/3 EV, ±1 EV
CAUTION
• If the underexposed or overexposed frame is outside
the camera’s control range, the picture is not taken with
the specified setting increments.
• This function can only be used for N, < , M or > in Shooting
mode.
MEMO Changing the setting (exposure range)
SHOOTING MENU
FLASH
BRACKETING
SET - UP
72
0
+1/
EV
EV
+
- 1 EV
3
+2
- /3
-
Press the MENU/OK to
display the menu and change
the setting in the
BRACKETING menu option
(➝p.90).
h LONG PERIOD continuous shooting
Available Photography modes: All (except for
)
Shooting continues as long as the shutter button is held
down (max. 0.6 frames/sec.). This mode shoots up to
Memory Card or internal memory end.
Release shutter button.
All frames
Advanced Features — Photography
Press shutter button.
MEMO
Continuous shooting mode and assist window (➝p.38)
can be used together.
73
j Increasing LCD Monitor Brightness
This is useful when checking the shot composition for
outdoor scenes.
Increasing the LCD monitor
brightness
Press j (n) to increase the LCD monitor brightness.
Press j (n) again to return to normal LCD monitor
brightness.
AUTO
N 16
UP
3/ 31
31/ 2007 10
10:00
00 AM
74
blinks on the LCD monitor
when the function is active.
MEMO
• This function is automatically canceled after each shot.
• When this function is active, it will increase the amount
of speckling in images on the screen. This is normal and
does not affect the photographed image.
• This function is purely for checking the composition of
your shot. It does not increase the brightness of the
image.
• Even if you increase the brightness in low-light
conditions, you cannot check the subject.
• The color tones may vary depending on the subjects.
Using p-MODE MENU (Photography)/SHOOTING MENU
Use these menus to adjust image quality or focus. You
can take pictures in a wide range of conditions.
Setting the p-MODE MENU
(Photography)
ISO
QUALITY
F
N
8
16 FRAMES
18
28
45
219
A Press p for about 0.5 seconds to open the
p-MODE MENU.
SHOOTING MENU
PHOTOMETRY
MULTI
WHITE BALANCE
SPOT
HIGH - SPEED SHOOTING
AVERAGE
FOCUSING
AF MODE
SHARPNESS
STD
A Press MENU/OK to open the SHOOTING
MENU.
B Press n or o to select the menu.
Advanced Features — Photography
MODE MENU
Setting the SHOOTING MENU
C Press q.
B Press n or o to select the menu.
D Press n or o to change the setting.
C Press q.
E Press MENU/OK to confirm the setting.
D Press n or o to change the setting.
E Press MENU/OK to confirm the setting.
75
Using p-MODE MENU (Photography)/SHOOTING MENU
Z List of p-MODE MENU options
Functions
Settings
Factory
default
Specifies required sensitivity setting of the ambient light around the
subject.
The larger value of the sensitivity, the higher sensitivity is obtained.
The higher sensitivity settings will allow you to take pictures in darker
locations.
AUTO/AUTO (800)/
AUTO (400)/1600/
800/400/200/100/64
AUTO
Menu
S ISO
(➝p.79)
Specifies the image size.The larger image size, the better image
quality is obtained. The smaller image size, the larger number of
images are recorded.
QUALITY
(➝p.80)
FinePix COLOR
(➝p.81)
FinePix S5700 /
FinePix S700:
F/
N/%/
4/2/`
FinePix S5800 /
FinePix S800:
iF/iN/%/4/
2/`
Specifies required color tone.This mode is effective for taking more vivid
STD/
shots or black and white shots.
/
N
iN
STD
Z List of SHOOTING MENU options
Menu
Functions
This setting can be used when the Mode dial is set to
or
.
SCENE POSITION
Use this setting to provide the best photography menu setting for the
(➝p.53)
scene being shot.
PHOTOMETRY
(➝p.82)
T WHITE BALANCE
(➝p.83)
HIGH-SPEED
SHOOTING
(➝p.84)
76
This setting can be used when the Mode dial is set to N, <, M or >.
Use this setting to specify the light metering method.
This setting can be used when the Mode dial is set to N, <, M or >.
Use this setting to adjust the color balance to suit the color of the
ambient light around the subject.
Settings
H/,/./8/ /
/
/ / / /
/
/
Factory
default
:H
:,
/
AUTO/]/6/7/9/
0/-/8
This setting can be used with any of the modes. This setting is always
set to ON when the Photography mode is set to ..
ON/OFF
Use this setting to reduce the time required for focusing.
AUTO
OFF
Menu
H FOCUSING
(➝p.85)
Functions
Factory
default
Settings
/
/
AF MODE
(➝p.87)
This setting can be used when the Mode dial is set to N, <, M, or >.
Use this setting to specify the focusing area.
/
/
G SHARPNESS
(➝p.89)
This setting can be used when the Mode dial is set to N, <, M or >.
Use this setting to soften or emphasize the outline of an image.
HARD/STANDARD/
SOFT
STANDARD
FLASH
(➝p.89)
This setting can be used when the Mode dial is set to N, <, M or >. –2/3 EV to +2/3 EV
Use this setting to adjust the amount of light emitted by the flash to suit in approx. 1/3 EV
the photography conditions or to achieve a desired effect.
increments
0
BRACKETING
(➝p.90)
This setting can be used when the Mode dial is set to N, <, M or >.
±1/3 EV, ±2/3 EV,
Use this setting to photograph the same image with different exposure
±1 EV
settings.
±1/3 EV
Continued Q
Advanced Features — Photography
This setting can be used when the Mode dial is set to N, <, M, or >.
Use this setting to specify the focusing mode.
77
Using p-MODE MENU (Photography)/SHOOTING MENU
MEMO
Note that the shooting menu will vary depending on the
selected shooting mode.
• B,
,
,
SHOOTING MENU
HIGH-SPEED SHOOTING
SET-UP
•
OFF
,
(The shooting menu options will vary
depending on the mode selected.)
SHOOTING MENU
SCENE POSITION
HIGH-SPEED SHOOTING
SET-UP
OFF
• N, <, M, >
SHOOTING MENU
PHOTOMETRY
WHITE BALANCE
AUTO
HIGH - SPEED SHOOTING OFF
FOCUSING
AF MODE
STD
SHARPNESS
78
p-MODE MENU (Photography)
Changing the sensitivity setting
(S ISO)
CHECK
• Settings
AUTO/AUTO(800)/AUTO(400)/1600/800/400/200/100/
64
Selecting AUTO/AUTO(800)/AUTO(400) as the
sensitivity setting, the camera selects the best
sensitivity setting for the subject’s brightness.
N 16
ISO 100
60
The selected sensitivity
setting appears on the
screen when the
sensitivity setting is set
to the setting other than
AUTO.
MEMO
• When anything other than N, <, M and > in the
Photography mode is selected, only AUTO can be
selected for the ISO (sensitivity) setting.
• When N, <, M and > in the Photography mode is
selected, AUTO cannot be selected for the ISO
(sensitivity) setting.
CAUTION
Although higher sensitivity settings will allow you to take
pictures in darker locations, they will also increase the
amount of speckling in your images. Choose the
sensitivity setting that best suits the conditions.
Advanced Features — Photography
Use this menu to specify required sensitivity setting of the
ambient light around the subject.
The larger value of the sensitivity, the higher sensitivity is
obtained. The higher sensitivity settings will allow you to
take pictures in darker locations.
Setting the menu (➝p.75)
PROGRAM SHIFT
F3. 5
F3
• About AUTO(800)/AUTO(400)
AUTO(800)/AUTO(400) can be selected when the
Mode dial is set to N. For AUTO(800)/AUTO(400),
sensitivity is automatically set in the same way as for
AUTO, but the highest sensitivity is limited. Select
AUTO(800)/AUTO(400) depending on the scene.
79
p-MODE MENU (Photography)
Changing the quality setting
(
QUALITY)
Setting the menu (➝p.75)
Area shot and quality setting
Area shot excluding %
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Z Quality settings in Photography mode
(FinePix S5700 / FinePix S700)
Quality mode
Sample uses
F (3072 × 2304) Printing at up to 10R (25.4 × 30.5 cm/
N (3072 × 2304) 10 × 12 in.) / A4 size
For better quality, select
F
% (3072 × 2048)
4 (2304 × 1728)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
2 (1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
` (640 × 480)
To use for e-mail or web site
Z Quality settings in Photography mode
(FinePix S5800 / FinePix S800)
Quality mode
Sample uses
i F (3264 × 2448) Printing at up to 10R (25.4 × 30.5 cm/
i N (3264 × 2448) 10 × 12 in.) / A4 size / A3 size
For better quality, select i F
% (3264 × 2176)
80
4 (2304 × 1728)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
2 (1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
` (640 × 480)
To use for e-mail or web site
60
PROGRAM SHIFT
F3. 5
F3
Area shot with %
N 16
16
ISO 100
ISO 100
60
PROGRAM SHIFT
F3. 5
F3
Normal shooting provides an aspect ratio of 4:3 and %
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to a Memory Card.
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes (➝p.164, 165). The
numbers to the right of setting show the number of
available frames.
Setting the menu (➝p.75)
Changing the FinePix COLOR
setting (
FinePix COLOR)
Use this menu to specify required color tone.
It is effective for taking vivid shots or black and white
shots.
FinePix COLOR settings
The contrast and color saturation
STD
are set to standard.
p-STANDARD Use this mode for normal
photography.
p-CHROME
The contrast and color saturation
are set to high.
This mode is effective for taking
more vivid shots of subjects such as
flowers.
p-B&W
This mode converts the colors in the
photographed image to black and
white.
• The FinePix COLOR setting is retained even when the
camera is off or the mode setting is changed.
• p-CHROME may have little visible effect with some
subjects or the scene being shot. You may not be able
to see any difference on the screen.
Advanced Features — Photography
CHECK
MEMO
When setting p-CHROME or p-B&W, the icon
appears on the screen.
CAUTION
When the Mode dial is set to
appear on the screen.
or
,
does not
81
SHOOTING MENU
Selecting light metering method
(
PHOTOMETRY)
Available Photography modes: N, <, M, >
Use this setting when the correct exposure cannot be
obtained by the shooting conditions.
SHOOTING MENU
PHOTOMETRY
MULTI
WHITE BALANCE
SPOT
HIGH - SPEED SHOOTING
AVERAGE
OFF
FOCUSING
AF MODE
SHARPNESS
STD
) MULTI (Pattern): Light metering where the camera
assesses the scene and selects the
correct exposure.
_ SPOT
: Light metering where the exposure
is optimized for the center of the
image.
+ AVERAGE
: Light metering where an average
value for the entire image is used.
82
Setting the menu (➝p.75)
To use the photometry modes effectively
• MULTI
In this mode, the camera uses automatic scene recognition
to analyze the subject and provide optimum exposure in a
wide range of shooting conditions.
• SPOT
This mode is useful for subjects with strongly contrasting
light and dark areas where you want to achieve the correct
exposure for a particular feature.
• AVERAGE
The advantage of this mode is that the exposure tends not
to change for different compositions or subjects. This mode
is particularly effective for shots of people wearing black or
white clothing and shots of scenery.
Setting the menu (➝p.75)
Adjusting color balance
(T WHITE BALANCE)
Available Photography modes: N, <, M, >
Adjust the color balance based on white to suit the color
of the ambient light around the subject.
AUTO
CUSTOM WB
NEW WB
NOT CHANGE
AUTO: Automatic adjustment
]
: Select the white balance be using white paper to
suit the shooting conditions.
6
: Shooting outdoors in good weather
7
: Shooting in shade
9
: Shooting under Daylight fluorescent lamps
0
: Shooting under Warm White fluorescent lamps
: Shooting under Cool White fluorescent lamps
8
: Shooting in incandescent light
CANCEL
MEMO
To use the white balance set previously, press the MENU/
OK without pressing the shutter button.
Advanced Features — Photography
WHITE BALANCE
] Custom white balance
A Select ] custom white balance (➝p.75).
B Hold a piece of white paper under the light source for
setting the white balance, so that it fills entire the
screen. Then press the shutter button to set the white
balance.
C When the correct exposure is measured,
“COMPLETED!” appears. Press MENU/OK to confirm
the setting.
COMPLETED!
SET
CANCEL
Continued Q
83
SHOOTING MENU
Setting the menu (➝p.75)
N 16
ISO 100
OVER
----
PROGRAM SHIFT
F-- - -
Set the exposure
compensation again, using
a negative value (–) when
[OVER] appears and a
positive value (+) when
[UNDER] appears (➝p.64).
Focusing the shot quickly
(
HIGH-SPEED SHOOTING)
Available Photography modes: All
Use this mode to reduce the time required for focusing
when pressing the shutter button down halfway.
It is useful to avoid missing snapshot opportunities.
OVER or UNDER
SHOOTING MENU
Example
HIGH-SPEED SHOOTING ON
SET-UP
OFF
You can change the white balance for a photographed image
by using colored paper instead of white paper.
MEMO
• In AUTO mode, the correct white balance may not be
achieved for subjects such as close-ups of people’s
faces and pictures taken under a special light source.
Select the correct white balance for the light source.
• When the flash fires, the white balance (except for
custom white balance) setting for the flash is used.
Consequently, to achieve a particular effect, the flash
mode should be set to C SUPPRESSED FLASH
(➝p.67).
• The specified custom white balance is retained until it is
reset. This setting is retained even if the batteries are
removed.
• The color tones may vary depending on the shooting
conditions (light source, etc.).
• After taking the picture, check the image color (white
balance).
• Explanation of Terms “White Balance” (➝p.168)
84
CAUTION
EVF/LCD MODE in the U SET-UP menu is
automatically set to 60fps (➝p.167).
MEMO
• Focal range
With High-speed shooting set to OFF
Wide-angle: approx. 30 cm (1 ft.) to infinity
Telephoto: approx. 1.0 m (3.3 ft) to infinity
With High-speed shooting set to ON
Wide-angle: approx. 1 m (3.3 ft.) to infinity
Telephoto: approx. 1 m (3.3 ft) to infinity
• When taking pictures while the High-speed shooting
mode is set to ON, the batteries will run down more
quickly.
• When setting . Sport mode, the camera sets to Highspeed shooting mode automatically.
Setting the menu (➝p.75)
Specifying the focusing mode
(H FOCUSING)
Available Photography modes: N, <, M, >
CONTINUOUS
Use this setting to take pictures of a moving subject. The
camera continues to focus on the main subject in the AF
frame.
Use this mode to specify focusing mode that best suits the
subject.
: CONTINUOUS
SHOOTING MENU
: SINGLE AF
PHOTOMETRY
: MF
N 16
ISO 100
60
PROGRAM SHIFT
F3.5
MF
CAUTION
• When using
CONTINUOUS, attention must be
given to the battery level.
The battery level (power consumption) increases when
using
CONTINUOUS. Because the camera focuses
continuously without pressing the shutter button.
• When using
CONTINUOUS,
AF MODE is set to
CENTER automatically.
Advanced Features — Photography
AF frame
AUTO
WHITE BALANCE
HIGH - SPEED SHOOTING OFF
FOCUSING
CONTINUOUS AF
AF MODE
SINGLE AF
SHARPNESS
Continued Q
85
SHOOTING MENU
Setting the menu (➝p.75)
SINGLE AF
MF
Use this setting to take picture of a static subject such as
a landscape.
This mode is used in situations where you focus
manually. Use this setting for alternative focusing or for
intentionally out-of-focus shots.
N 16
ISO 100
N 16
ISO 100
60
PROGRAM SHIFT
F3. 5
F3
FOCUSING
60
F3. 5
F3
A While pressing D, turn the zoom
lever towards W or T to focus. The
mark changes to yellow when
the subject is in focus.
B Press the shutter button to take
pictures.
86
Setting the menu (➝p.75)
Specifying the focusing area
(
AF MODE)
Available Photography mode: N, <, M, >
AUTO
WHITE BALANCE
HIGH - SPEED SHOOTING OFF
FOCUSING
CENTER
AF MODE
MULTI
SHARPNESS
AREA
N 16
ISO 100
60
PROGRAM SHIFT
F3.5
Halfway pressed
CENTER
The camera focuses on the center of the screen.
Use this setting when taking pictures with AF/AE lock
(➝p.34).
Advanced Features — Photography
Use this mode to specify the focusing area that best suits
the subject.
: CENTER
SHOOTING MENU
: MULTI
PHOTOMETRY
: AREA
MULTI
When pressing the shutter button down halfway, the
camera recognizes any strongly contrasting subject near
the center of the screen and displays the AF frame over
subject in focus.
AF frame
N 16
60
ISO 100
F3
F3. 5
CAUTION
PROGRAM SHIFT
60 F3
F3. 5
When taking pictures in Macro mode, the camera focuses
on the center of the screen.
MEMO
When the AF frame does not appear in the focusing
position, select
CENTER in the AF mode and use AF/
AE lock (➝p.34).
Continued Q
87
SHOOTING MENU
Setting the menu (➝p.75)
AREA
C Press the shutter button to take pictures.
The camera changes the focusing position on the screen.
Use this setting when composing the shot using a tripod
and changing the focusing position.
MEMO
SELECT AF AREA
Before moving
Target point
SET
CANCEL
After moving
A Press n, o, p or q to move the
(target point) to the focusing position.
N 16
ISO 100
60
PROGRAM SHIFT
F3. 5
F3
B The AF frame appears in the location to
which the target point was moved when
you press MENU/OK.
88
• To reposition the AF frame, repeat step A.
• Regardless of the AF frame location, the exposure is
always set using the area in the center of the screen. To
expose the shot for your main subject, use AF/AE lock
(➝p.34).
Setting the menu (➝p.75)
Adjust the image outline (hard/
soft) (G SHARPNESS)
Available Photography modes: N, <, M, >
Available Photography modes: N, <, M, >
Use this setting to change the amount of light emitted by
the flash to suit the photography conditions or to achieve
a desired effect.
SHOOTING MENU
FLASH
BRACKETING
SET - UP
+2/3
AUTO
+1/3
+- 0
- 1/3
- 2/3
0
Advanced Features — Photography
Use this setting to soften or emphasize the outline and
quality of an image.
HARD:
SHOOTING MENU
Emphasizes the outlines.
PHOTOMETRY
Best for shots of subjects
AUTO
WHITE BALANCE
such as buildings or text
HIGH - SPEED SHOOTING OFF
where sharp images are
FOCUSING
HARD
AF MODE
desirable.
STANDARD
SHARPNESS
SOFT
STANDARD:
Best for ordinary
photography. Provides edge
sharpness that is ideal for
most picture taking situations.
SOFT:
Softens the outlines. Best for
shots of subjects such as
people, where a softer image
is desirable.
Adjust the amount of light
emitted by the flash
(
FLASH (Brightness
Adjustment))
CHECK
Compensation range:
• –2/3 EV to +2/3 EV in approx. 1/3 EV increments (total:
5 levels selectable)
• Explanation of Terms “EV” (➝p.167)
CAUTION
• Depending on the type of subject and the shooting
distance, brightness adjustment may have no effect.
• The image may appear dark when setting the shutter
speed to higher than 1/1000 sec.
89
SHOOTING MENU
Setting the menu (➝p.75)
Photograph the same image with
different exposure
(
BRACKETING)
Available Photography modes: N, <, M, >
Use this setting to photograph the same image with
different exposure settings. Bracketing shoots 3
continuous frames, one of which is correctly exposed
while the remaining two are underexposed and
overexposed respectively by a set amount.
SHOOTING MENU
FLASH
BRACKETING
SET - UP
• If the underexposed or overexposed frame is outside
the camera’s control range, the picture is not taken with
the specified setting increments.
• Flash photography cannot be used.
• This feature always takes 3 shots. However, if there is
insufficient space on the Memory Card or internal
memory for 3 shots, no picture will be taken.
MEMO Auto bracketing
CONTINUOUS
AUTO BRACKETING
0
+1/
-
+2/
-
-1
+
3
3
EV
EV
EV
CHECK
• Bracketing settings (3) ±1/3 EV, ±2/3 EV, ±1 EV
• Explanation of Terms “EV” (➝p.167)
90
CAUTION
OFF
After setting the exposure for
bracketing:
A Hold down f.
B Press n or o to select j
AUTO BRACKETING.
Playback Information
CAUTION
Use this function to check the photography information.
Press D to check the information. Press D again to
return to playback mode.
• Highlight warning
100-0002
100
0002
F
ISO 400
1/60 F3.5
:STD
STD
:OFF
OFF
:AUTO
AUTO
:+1
3/ 31
31/ 2007 10
10:00
00 AM
Overexposed area blinks in
black.
Highlight warning
A Quality mode
B Sensitivity
C Shutter speed/Aperture
D FinePix COLOR
E Flash
F White balance
G Exposure compensation setting
H Frame number
I Histogram
A histogram is a chart showing the distribution of brightness in
an image (horizontal axis: brightness; vertical axis: pixels).
Pixels
F
ISO 400
1/60 F3.5
:STD
STD
:OFF
OFF
:AUTO
AUTO
:+1
3/ 31
31/ 2007 10
10: 00 AM
Brightness
Shadows
Highlights
A Optimal exposure:
There is an ample distribution of
pixels overall with a peak in the
middle range.
B Overexposed:
The number of highlight pixels
is high with the distribution
sloping upwards to the right.
Advanced Features — Playback
Histograms
100-0002
100
0002
C Underexposed:
The number of shadow pixels is
high with the distribution sloping
upwards to the left.
CAUTION
The shape of the graph will vary depending on the
subject.
91
Using p-MODE MENU (Playback)/PLAYBACK MENU
Use these menus to playback photographed images.
Setting the p-MODE MENU
(Playback)
Setting the PLAYBACK MENU
A Set the camera to Playback mode (➝p.39).
A Set the camera to Playback mode (➝p.39).
PLAYBACK MENU
MODE MENU
SLIDE SHOW
PRINT ORDER (DPOF)
B Press p button for about 0.5 seconds to
open the p-MODE MENU.
ERASE
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO
TRIMMING
B Press MENU/OK to open the PLAYBACK
MENU.
C Press n or o to select the menu.
C Press n or o to select the menu.
D Press q.
D Press q.
E Press n or o to change the setting.
E Press n or o to change the setting.
F Press MENU/OK to confirm the setting.
F Press MENU/OK to confirm the setting.
92
p-MODE MENU (Playback)
Setting automatic playback
(
SLIDE SHOW)
Use this mode to playback photographed images
continuously. You can select type of image transition.
Setting the menu (➝p.92)
DPOF set frame
(
PRINT ORDER (DPOF))
You can specify the image, number of prints, with or
without date of printing with a DPOF-compatible printer.
MODE MENU
MODE MENU
MEMO
• To interrupt automatic playback, press MENU/OK.
• Press p or q to advance or go back through the
images when selecting NORMAL and FADE-IN.
• The Auto power off function (➝p.120) does not operate
during playback.
• Movie starts automatically. When the movie ends, the
playback function moves it on.
• Press DISP/BACK once during playback to display onscreen help.
SLIDE SHOW
PRINT ORDER (DPOF)
WITH DATE
WITHOUT DATE
RESET ALL
WITH DATEE : The date will be imprinted on your
prints.
WITHOUT DATE : The date will not be imprinted on your
prints.
RESET ALL
: All DPOF settings will be canceled.
Continued Q
Advanced Features — Playback
SLIDE SHOW
NORMAL
PRINT ORDER (DPOF)
NORMAL
FADE-IN
FADE-IN
MULTIPLE
CLOCK
93
p-MODE MENU (Playback)
WITH DATE / WITHOUT DATE
Selecting WITH DATEE, E appears on the screen and
the date will be imprinted on your prints.
PRINT ORDER (DPOF
DPOF)
DPOF : 00009
Total number of prints
Setting for that frame
Setting the menu (➝p.92)
MEMO Canceling DPOF setting
A Press p to open the p-MODE MENU and press n or
o to select
PRINT ORDER (DPOF).
B Press q.
C Press n or o to select WITH DATE E or WITHOUT
DATE and press MENU/OK to display the print order
screen.
D Press p or q to select the frame (file) with the DPOF
setting you want to cancel.
E Press o to set the number of prints to 0 (zero).
01 SHEETS
FRAME
SET
A Press p or q to display the frame (file)
for specifying DPOF setting.
B Press n or o to set a value.
Up to 99 sheets are printed.
For frames (files) that you do not want
printed, set the number of prints to 0
(zero).
To specify more DPOF settings, repeat steps A and B.
C Always press MENU/OK after the settings
are completed.
Pressing DISP/BACK cancels those
settings.
D Press MENU/OK again. The total number
of prints appears on the screen.
94
To cancel the DPOF setting for another frame (file),
repeat steps D and E.
Always press MENU/OK to complete the settings.
• RESET ALL (➝p.95)
Setting the menu (➝p.92)
MEMO
• When DPOF settings were specified on another
camera.
RESET ALL
To cancel all DPOF settings:
RESET DPOF OK?
YES
RESET DPOF OK?
NO
CANCEL
Select RESET ALL in the p-MODE MENU (➝p.93).
Press MENU/OK.
MEMO
100-0001
100-0001
100
0001
NN
CAUTION
• Pressing DISP/BACK while choosing settings will
cancel all current settings. If there were previous DPOF
settings, only the modifications are canceled.
• When selecting the WITH DATE E setting, the date is
imprinted on your shots using the Print Service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some
cases).
• Images photographed with a camera other than FinePix
S5700 / FinePix S700 / FinePix S5800 / FinePix S800
may not be specified DPOF settings.
Advanced Features — Playback
When the data includes a frame (file) with DPOF
settings that were specified on another camera,
“RESET DPOF OK?” appears.
Pressing MENU/OK erases all of the DPOF settings
already specified for each frame (file). Specify the
DPOF setting for each frame (file) again.
• Prints of up to 999 frames (files) can be ordered on the
same Memory Card.
• DPOF settings cannot be specified for movies.
YES
31/ 2007 10
10:00
00 AM
3/ 31
u appears on the screen during playback when the
image has specified DPOF settings.
95
p-MODE MENU (Playback)
Setting the menu (➝p.92)
Z u PRINT ORDER (DPOF)
DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications
for images shot using a digital camera on media such as a Memory Card. The recorded specifications include
information on which frames are to be printed.
*Some printers do not support date and time imprinting or specification of the number of prints.
*The warnings shown below may appear while specifying the prints.
“DPOF SPECIFIED. ERASE OK ?”
“DPOF SPECIFIED. ERASE ALL OK ?” (➝p.46)
When erasing the image, the DPOF setting for that image is deleted at the same time.
“RESET DPOF OK ?” (➝p.95)
When inserting a Memory Card that contains images specified for printing by another camera, those print specifications are all reset
and replaced by the new print specifications.
[DPOF FILE ERROR] (➝p.151)
Up to 999 images can be specified on the same Memory Card.
96
PLAYBACK MENU
Setting the menu (➝p.92)
Rotating the images
(
IMAGE ROTATE)
IMAGE ROTATE
When shooting in the vertical position, the image appears
horizontal on the screen.
Use this mode to rotate an image and to display correct
direction. Your camera calls images “frames”.
CAUTION
MEMO
An image can be rotated only when playing back using
FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix
S800.
You may not be able to rotate images that were shot with
a camera other than the FinePix S5700 / FinePix S700 /
FinePix S5800 / FinePix S800.
CANCEL
E Press n or o to rotate the image.
o: Rotates the image clockwise at a 90
degree angle.
n: Rotates the image counterclockwise at
a 90 degree angle.
A Press p or q to select the rotating frame
(file).
Advanced Features — Playback
Protected frames (files) cannot be rotated. Unprotect the
frames (files) before rotating them (➝p.98).
SET
B Press MENU/OK to open the PLAYBACK
MENU.
C Press n or o to select
ROTATE.
D Press MENU/OK.
IMAGE
F Press MENU/OK to confirm the setting.
Next time the image is played back, it will
be automatically rotated.
Press DISP/BACK to cancel rotating the
image.
97
PLAYBACK MENU
Setting the menu (➝p.92)
Protecting the images
(
PROTECT)
SET ALL
SET ALL OK?
IT MAY TAKE A WHILE
Use this mode to prevent frames (files) from being
accidentally erased. Your camera calls images “frames”.
FRAME SET / RESET
YES
To protect or unprotect only the selected frame (file):
PROTECT OK?
UNPROTECT OK?
CANCEL
Press MENU/OK to protect all the frames
(files).
RESET ALL
YES
CANCEL
Unprotected
YES
CANCEL
Protected (F appears)
RESET ALL OK?
IT MAY TAKE A WHILE
A Press p or q to select the protecting/
unprotecting frame (file).
B Press MENU/OK to protect/unprotect the
currently displayed frame (file).
Unprotected: protecting frame (file)
Protected: reset frame (file)
To protect another frame (file), repeat steps A and B.
When protecting frames (files) is completed, press DISP/
BACK.
98
YES
CANCEL
Press MENU/OK to unprotect all the frames
(files).
Setting the menu (➝p.92)
MEMO To stop the procedure midway
Copying the images
(V COPY)
It is possible to transfer saved images between the
internal memory and a Memory Card. Your camera calls
images “frames”.
CANCEL
CAUTION
The Format function erases all the frames (files),
including protected frames (files) (➝p.120).
COPY
INTERNAL MEMORY
CARD
CARD
INTERNAL MEMORY
NEXT
CANCEL
A Press n or o to select Y INTERNAL
MEMORY Q \ CARD or \ CARD Q
Y INTERNAL MEMORY.
Advanced Features — Playback
If the images are very large, protecting or unprotecting all
the frames (files) may take some time.
If you want to take a picture or record a movie during the
procedure, press DISP/BACK.
Z Selecting COPY
B Press q.
Continued Q
99
PLAYBACK MENU
Setting the menu (➝p.92)
Copying one frame at a time (FRAME)
COPY OK?
100 - 0001
COPY
INTERNAL MEMORY
CARD
FRAME
CARD
INTERNAL MEMORY
ALL FRAMES
YES
YES
CANCEL
CANCEL
C Press p or q to select the copying frame
(file).
A Press n or o to select FRAME.
D Press MENU/OK to copy the currently
displayed frame (file).
B Press MENU/OK.
MEMO
To copy another frame (file), repeat steps C and D.
When copying frames (files) is completed, press DISP/
BACK.
100
Setting the menu (➝p.92)
Copying all frames (ALL FRAMES)
COPY ALL OK?
100 - 0001
IT MAY TAKE
A WHILE
COPY
INTERNAL MEMORY
CARD
FRAME
CARD
INTERNAL MEMORY
ALL FRAMES
YES
YES
CANCEL
CANCEL
A Press n or o to select ALL FRAMES.
CAUTION
B Press MENU/OK.
• When [\ MEMORY FULL] or [Y MEMORY FULL]
appears on the screen, copying the data stops on the
way.
• When copying the image that has specified DPOF
setting, the DPOF setting is not copied.
Advanced Features — Playback
C Press MENU/OK to copy all the frames
(files).
101
PLAYBACK MENU
Setting the menu (➝p.92)
Adding voice memos to the
images (
VOICE MEMO)
REC STANDBY
30s
Voice memos of up to 30 seconds can be added to still
images.
START
Recording voice memos
A Press p or q to select the image to add
a voice memo.
B Press MENU/OK to open the PLAYBACK
MENU.
CANCEL
E Press MENU/OK to start recording.
The remaining recording time appears during recording.
RECORDING
C Press n or o to select
28s
Remaining
time
VOICE MEMO.
Blinking red
D Press q.
REC
RE - REC
MEMO
Microphone
Face the microphone to record your comment.
Hold the camera about 20 cm (7.9 in.) away for the best
results.
102
Setting the menu (➝p.92)
Playing back voice memo
FINISH
A Press p or q to select an image file with
a voice memo. # appears on the screen.
REC
B Press o to start playing back the voice
memo.
RE - REC
15s
To record your comment: press MENU/OK.
To rerecord the comment: press DISP/BACK.
The playback time appears on
the screen along with a
progress bar.
MEMO
• When the image already has a voice memo
If you select an image that
already has a voice memo, a
screen appears in which you
can select whether to rerecord
the memo.
PLAYBACK MENU
ERASE
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO
TRIMMING
STOP
PAUSE
Progress bar
Advanced Features — Playback
F The voice memo ends when pressing
MENU/OK midway or 30 seconds pass.
CAUTION
BACK
RE - REC
• When “PROTECTED FRAME” appears, unprotect the
frame (➝p.98).
• Voice memos cannot be added to movies.
Speaker
Uncover the speaker.
The sound may be difficult to hear.
Continued Q
103
PLAYBACK MENU
Setting the menu (➝p.92)
Z Playing back voice memos
Control
Playback
Adjusting volume of voice memos
Description
Playback begins.
The voice memo stops when
playback ends.
Volume can be adjusted while playing back voice memos.
VOLUME
7
Pause /
Resume
Pauses the voice memo during
playback.
Press o again to resume
playback.
Stop
Stops playback.
Press p or q while voice
memo playback is stopped to go
back to the previous file or
advance to the next file
respectively.
Fast forward /
Rewind
Press p or q during playback
to skip forwards or backwards
through the voice memo.
These buttons do not function
while playback is paused.
CHECK
• Audio recording format:
WAVE (➝p.167), PCM recording format
• Audio file size:
Approx. 480 KB (for a 30-second voice memo)
MEMO Playing voice memo files
You may not be able to play back some voice memo files
recorded on other cameras.
104
SET
CANCEL
A Press MENU/OK while playing back voice
memo.
The voice memo is paused during
playback.
B Press n or o to adjust the volume.
C Press MENU/OK to confirm your selection.
Camera starts to play back the voice
memo.
Setting the menu (➝p.92)
Trimming the images
(
TRIMMING)
TRIMMING
Navigation screen
(Current displayed image)
Use this mode to trim the required part of the
photographed image.
CHECK
YES
Before selecting
frame (file).
CANCEL
TRIMMING, select the trimming
T:tele zoom dial
(Zoom in)
TRIMMING
TRIMMING
B Press n, o, p or q to move to another
part of the image.
C Press MENU/OK.
REC OK?
YES
CANCEL
YES
CANCEL
Advanced Features — Playback
W:wide zoom dial
(Zoom out)
Zoom bar
REC
A Turn to W or T to zoom in or out on an
image.
MEMO
Press DISP/BACK to return to single-frame playback.
CANCEL
D Check the saved image size and press
MENU/OK.
The trimmed image is added as a separate
file in the final frame.
Continued Q
105
PLAYBACK MENU
MEMO
• A saved image size varies depending on the zoom
scale of step A. For 0.3 M, k YES option appears
in yellow.
• Image sizes
4
Printing at up to 6R (15.2 × 20.3 cm/6 × 8 in.) /
A5 size
2
Printing at up to 4R (10.2 × 15.2 cm/4 × 6 in.) /
A6 size
`
To use for e-mail or web site
• When % quality setting is selected, the image is
trimmed to normal size (4:3 aspect ratio).
CAUTION
You may not be able to trim images that were shot with a
camera other than FinePix S5700 / FinePix S700 /
FinePix S5800 / FinePix S800.
106
Setting the menu (➝p.92)
r Recording Movies
Use this mode to record movies with sound.
1
2
Record movies.
Set the camera to r Movie mode.
30s
REC 999m12s
Set the Mode dial to r.
Fully pressed
999m13s
30s
STANDBY
The available recording time
appears on the screen.
Recording ends when pressing the
shutter button down halfway during
recording or the remaining time
runs out.
8/ 31
3/
24/ 2007
24
31/
2006 10
10:00
00 AM
Advanced Features — Movie
Press the shutter button down fully to start recording.
During recording, lREC and a counter that shows the
remaining time appear on the screen.
Halfway pressed
MEMO
There is no need to hold down the shutter button during
recording.
Continued Q
107
r Recording Movies
Z Zooming the image
Turn the zoom dial to zoom in or out during shooting.
REC
27s
Zoom bar
CHECK Recording movies
• Specifications: Motion JPEG (➝p.167), Monaural
sound
• Quality selection method: % (640 × 480 pixels)
$ (320 × 240 pixels)
• Frame rate (➝p.167): 30 frames per second (fixed)
MEMO
Turn the zoom dial to zoom in or out on an
image.
CHECK
• Optical zoom focal length*
With IMAGE STABILIZATION set to OFF:
approx. 38 mm to 380 mm
Max. zoom scale: 10x
With IMAGE STABILIZATION set to ON:
approx. 48 mm to 580 mm
Max. zoom scale: 12x
• Focal range
Wide-angle: approx. 4 cm (1.6 in.) to infinity
Telephoto: approx. 60 cm (2.0 ft.) to infinity
* 35 mm camera equivalent
108
• The brightness and color of the screen shown during
movie recording may differ from those shown before
recording begins.
• The focus, exposure and white balance will be
automatically adjusted to the scene being shot even
after recording has started.
• If recording is stopped immediately after it begins,
1 second of the movie is recorded onto the Memory
Card or internal memory.
CAUTION
• Because a movie is recorded onto the Memory Card or
internal memory as it is saved, it cannot be recorded
correctly if the camera suddenly loses power (if the
batteries run out or the AC power adapter is
disconnected).
• A movie file taken by FinePix S5700 / FinePix S700 /
FinePix S5800 / FinePix S800 may not be playable on
other cameras.
•
EVF/LCD MODE in the U SET-UP menu is
automatically set to 60 fps (➝p.167).
• Because sound is recorded concurrently with the
images, make sure that you do not cover the
microphone with a finger, etc. (➝p.14).
• Camera operation noises may be recorded during
movie shooting.
Using the Image Stabilization
Function
IMAGE STABILIZATION enables you to take stable and
blur-free images even under difficult shooting conditions,
such as telephoto shooting.
Press MENU/OK to open the shooting menu.
Changing movie size
Press p to open the p-MODE MENU.
MODE MENU
QUALITY
30s
48s
SHOOTING MENU
IMAGE STABILIZATION
ON
SET-UP
OFF
A Press q.
B Press n or o to change the setting.
C Press MENU/OK to confirm the setting.
CAUTION
B Press n or o to change the setting.
C Press MENU/OK to confirm the setting.
Advanced Features — Movie
A Press q.
Z Quality settings in Movie mode
% (640 × 480 pixels): For better quality
$ (320 × 240 pixels): To record longer movies
Continued Q
• Image size differs depending on the IMAGE
STABILIZATION setting.
• Set IMAGE STABILIZATION to OFF when the camera
is used with a tripod. Shooting with ON selected in this
case may result in an image that looks unnatural.
109
r Recording Movies
MEMO
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• In r Movie mode, you cannot set the S (sensitivity)
setting and
FinePix COLOR setting.
• See p.164, 165 for information on recording times per
Memory Card or internal memory.
CAUTION
• If you shoot using the xD-Picture Cards with model
numbers containing “M” such as DPC-M1GB, movie
recording time may be reduced if you repeatedly record
and erase (frame erase) image files.
In such a case, erase all frames or format the xDPicture Card before use. Back up important frames
(files) onto your PC or another media.
• A movie recording will stop automatically when a movie
file becomes approx. 2GB. If you want to continue
recording another movie, press the shutter button
again. The available recording time is displayed based
on approx. 2GB.
110
w Playing Back Movies
Setting the camera to w
Playback mode (➝p.39)
Z Playing back movies
Control
100- 0006
100
Playback
3/ 31
31/ 2007 10
10:00
00 AM
PLAY
Pauses the movie during
playback.
Press o again to resume
playback.
Stop
Stops playback.
Press p or q while playback is
stopped to go back to the previous
file or advance to the next file
respectively.
Fast
forward /
Rewind
Press p or q during playback to
skip forwards or backwards
through the movie.
Skip
playback
Press p or q when the movie is
paused, the movie advances or
goes back one frame.
Hold down p or q to move
through the frames quickly.
B Press o to begin playing back movie.
STOP
PAUSE
Progress bar
The playback time appears on
the screen along with a
progress bar.
Advanced Features — Movie
Pause /
Resume
A Press p or q to select the movie file. r
appears on the screen.
30s
Description
Playback begins.
Playback stops when the end of
the movie is reached.
Continued Q
111
w Playing Back Movies
MEMO
If the subject of the shot is very bright, white vertical
streaks or black horizontal streaks may appear in the
image during playback. This is normal.
Setting the camera to w Playback mode (➝p.39)
Adjusting volume of movies
Volume can be adjusted while playing back movies.
VOLUME
CAUTION
• You may not be able to playback some movie files
recorded on other cameras.
• To playback movie files on a PC, save the movie file on
the Memory Card or internal memory to the PC’s hard
disk and then playback the saved file.
• Uncover the speaker. The sound is difficult to hear.
7
SET
CANCEL
A Press MENU/OK while playing back
movie.
The movie is paused during playback.
B Press n or o to adjust the volume.
C Press MENU/OK to confirm the setting.
Camera starts to playback the movie.
112
U SET-UP
Using the SET-UP menu
1
Open the SET-UP menu.
A Press MENU/OK to open the menu.
B Press n or o to select U SET-UP.
C Press q.
2
Change the page.
DATE / TIME
BEEP VOLUME
SHUTTER VOLUME
PLAYBACK VOLUME
LCD BRIGHTNESS
FORMAT
Change the setting.
SET - UP
DATE / TIME
BEEP VOLUME
SHUTTER VOLUME
PLAYBACK VOLUME
LCD BRIGHTNESS
FORMAT
OFF
A Press n or o to select the menu.
B Press q.
Different type of screen appears
depending on selected item.
Settings
SET - UP
3
C Press n or o to change the setting.
D Press MENU/OK to confirm the setting.
A Press p or q to select the page.
B Press o to move to menu item.
113
U SET-UP
How to use the SET-UP menu (➝p.113)
SET-UP menu option
Setting
q
Factory default
Explanation
Page
IMAGE DISP.
CONTINUOUS/3 SEC/
1.5 SEC/ZOOM
(CONTINUOUS)/OFF
Display
1.5 SEC
Sets the way for displaying the check image screen
(photograph result) after taking a picture. The color
tones in images recorded may differ from actual
color. Playback the recorded images to check them.
116
FRAME NO.
CONTINUOUS/
RENEW
CONTINUOUS
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
117
ON/OFF
ON
Specifies whether the AF-assist illuminator is ON or
OFF.
36
118
AF ILLUMINATOR
DIGITAL ZOOM
ON/OFF
OFF
Specifies whether digital zoom is used.
EVF/LCD MODE
30fps/60fps
60fps
Sets the screen display to the fine mode.
–
–
–
Corrects the date or time.
28
DATE/TIME
BEEP VOLUME
/
/
/ OFF
Sets the volume of the tone emitted when the
camera controls are used.
–
SHUTTER
VOLUME
/
/
/ OFF
Sets the volume of the sound emitted when the
shutter operates.
–
PLAYBACK
VOLUME
–
LCD BRIGHTNESS
–
FORMAT
114
–
7
Sets the volume of playing back movie and voice
memo.
119
0
Sets the LCD monitor brightness.
119
–
Initializes a Memory Card or internal memory.
Select this menu to erase all the frames (files).
120
How to use the SET-UP menu (➝p.113)
Setting
Display
Factory default
ENGLISH
Explanation
Page
Specifies the language used for screen display.
29
Sets the time of turning camera off when camera is
not used.
120
Specifies the time difference settings.
121
AUTO POWER
OFF
5 MIN/2 MIN/OFF
2 MIN
TIME
DIFFERENCE
N/I
N
–
–
Specifies the colors of menu and background.
–
–
Discharges Ni-MH batteries.
NTSC/PAL
–
Specifies whether video output is set to NTSC or
PAL.
–
–
Resets all the camera settings (other than the
DATE/TIME, TIME DIFFERENCE, BACKGROUND
COLOR, and VIDEO SYSTEM) to the factory
default values set at shipment. A confirmation
message appears when you press q. To reset the
camera settings, press p or q to select OK and
press MENU/OK.
–
BACKGROUND
COLOR
VIDEO SYSTEM
RESET
–
146
Settings
DISCHARGE
–
115
U SET-UP
IMAGE DISP.
Use this setting to specify the way for displaying the check
image screen (photograph result) after taking a picture.
How to use the SET-UP menu (➝p.113)
Z Enlarging images
ZOOM (CONTINUOUS
CONTINUOUS))
Navigation screen
(Current displayed image)
CONTINUOUS:
The results are always displayed after you shoot.
Press the MENU/OK to take another picture.
NEXT SHOOTING
3 SEC/1.5 SEC:
The image appears for about 3 or 1.5 seconds and is
then recorded.
A Turn to W or T to zoom in or out of an
image.
ZOOM (CONTINUOUS):
The image appears enlarged. Use this mode to check
details of image.
B Press n, o, p, or q to display another
part of the image.
OFF:
The results are not displayed.
CAUTION
• The color tones in images displayed when 3 SEC or 1.5
SEC is selected may differ slightly from those in the
images actually recorded.
• IMAGE DISP. cannot be used when h LONG PERIOD
(➝p.73) is set.
116
C Press MENU/OK to take another picture.
The image is recorded automatically.
MEMO
• When ` quality setting is selected, the image cannot
be enlarged.
• Pressing DISP/BACK cancels the zoom setting.
• This function is disabled when setting the continuous
shooting.
• This function is disabled when selecting
.
How to use the SET-UP menu (➝p.113)
CHECK
FRAME NO.
Frame number
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin
again.
100 - 0001
File number
<CONTINUOUS> <RENEW>
A
Directory number
3/ 31
31/ 2007 10
10:00
00 AM
B
* Formatted Memory Card or internal memory used for
both A and B.
RENEW:
Pictures are stored on each Memory Card beginning
with a file number 0001.
Each image will be numbered consecutively from the
last number used. So when recorded images in the
Memory Card are erased, the number of the erased
frame will not be used again.
MEMO
• Setting this function to CONTINUOUS makes file
management easier as it makes sure that file names
are not duplicated when images are downloaded to a
PC.
• When the camera settings are
RESET (➝p.115),
the frame number setting (CONTINUOUS or RENEW)
is changed to CONTINUOUS and the frame number
itself does not return to 0001.
• In CONTINUOUS setting, images are stored beginning
from the highest file number on the current Memory
Card when the Memory Card already contains image
files with file numbers higher than the highest file
number on the last Memory Card.
• The displayed frame number may differ for images
photographed on other cameras.
Settings
CONTINUOUS:
Pictures are stored beginning from the highest file
number stored on the last Memory Card or internal
memory used.
The last 4 digits of the 7-digit number in the top right
corner of the screen are the file numbers, while the
first 3 digits show the directory number.
117
U SET-UP
How to use the SET-UP menu (➝p.113)
CHECK
DIGITAL ZOOM
Use this function to shoot enlarged images than
maximum optical zoom scale.
AUTO
N 16
Zoom bar
• Optical zoom focal length*
Approx. 38 mm to 380 mm
• Digital zoom focal length*
- FinePix S5700 / FinePix S700
Approx. 380 mm to 1824 mm
Max. zoom scale: approx. 48×
- FinePix S5800 / FinePix S800
Approx. 380 mm to 1938 mm
Max. zoom scale: approx. 51×
* 35 mm camera equivalents
3/ 31
31/ 2007 10
10: 00 AM
MEMO
Z Zoom bar display
When zooming changes between optical and digital, the
position of the “ ” indicator stops. Press the same Zoom
button again to start the “ ” indicator moving again.
OFF
Optical zoom:10
FinePix S5700 / FinePix S700
ON
Optical zoom:10
Digital zoom:
approx.4.8
FinePix S5800 / FinePix S800
ON
Optical zoom:10
118
Digital zoom:
approx.5.1
CAUTION
Using the digital zoom allows you to enlarge your subject
and shoot it. However, it will lower your image quality. Set
the digital zoom when requiring it.
How to use the SET-UP menu (➝p.113)
PLAYBACK VOLUME
LCD BRIGHTNESS
Use this function to adjust volume while playing back
movie and voice memo.
Use this function to adjust the screen brightness.
LCD BRIGHTNESS
VOLUME
0
7
SET
SET
CANCEL
CANCEL
A Press n or o to adjust the screen
brightness.
The indicator moves to the + to display the
screen brightly or to the – to darken the
screen.
B Press MENU/OK to confirm the setting.
B Press MENU/OK to confirm the setting.
Settings
A Press n or o to adjust the volume.
The larger the number, the larger the
volume is emitted. 0 (zero) indicates a
sound deadening.
119
U SET-UP
How to use the SET-UP menu (➝p.113)
FORMAT
AUTO POWER OFF
Initialize (format) the Memory Card or internal memory for
use with the camera.
When this function is active and the camera remains
unused for 2 or 5 minutes, it turns camera off.
Use this function when you want to get the maximum
possible running time from your batteries.
FORMAT
FORMAT OK?
ERASE ALL DATA
OK
CANCEL
SET
Place of initialize
Y FORMAT OK?:
Internal memory
\ FORMAT OK?:
Memory Card
A Press p or q to select OK.
B Pressing MENU/OK initializes the Memory
Card or internal memory.
CAUTION
• The Format function erases all the frames (files),
including protected frames (files).
Back up important frames (files) onto your PC or
another media.
• Do not open the battery cover or slot cover during
formatting. The Memory Card or internal memory could
be damaged.
120
CAUTION
The Auto power off function is disabled during slide show
(➝p.93), discharging rechargeable batteries (➝p.146),
and when a printer or a PC connection (➝p.125, 135) is
being used.
MEMO To restore power to the camera
Refer to “Turning On and Off” (➝p.25).
How to use the SET-UP menu (➝p.113)
TIME DIFFERENCE
2
Use this function when traveling to destinations in
different time zones. This function sets a time difference
relative to the date and time currently set. When this
setting is enabled, the specified time difference is applied
when pictures are taken.
1
Move to TIME DIFFERENCE screen.
SET - UP
ENGLISH
AUTO POWER OFF
2 MIN
TIME DIFFERENCE
HOME
BACKGROUND COLOR
LOCAL
DISCHARGE
VIDEO SYSTEM
NTSC
Use Time difference function.
SET - UP
ENGLISH
AUTO POWER OFF
2 MIN
TIME DIFFERENCE
HOME
BACKGROUND COLOR
LOCAL
DISCHARGE
VIDEO SYSTEM
NTSC
3
Set time difference.
TIME DIFFERENCE
3 / 31 / 2007
10:00 AM
3 / 31 / 2007
10:00 AM
SET
Settings
Press n or o to change between N HOME
and I LOCAL.
To set the time difference, select I LOCAL.
N HOME: Your home time zone
I LOCAL: Your destination time zone
Press q.
CANCEL
A Press p or q to select +/–, hour, and
minute.
B Press n or o to change the setting.
C Always press MENU/OK after the settings
are completed.
Continued Q
121
U SET-UP
How to use the SET-UP menu (➝p.113)
CHECK
Available time setting
–23:45 to +23:45 (in 15-minute increments)
MEMO
N 16
ISO 100
3/ 31
31/ 2007 11
11:00
00 AM
PROGRAM SHIFT
F3. 5
F3
In the time difference
setting, when you change to
the Photography mode, I
and the date is displayed for
3 seconds, the date display
turns yellow.
60
CHECK
Upon returning from a trip, always change the time
difference setting back to N HOME and then check the
date and time again.
122
Connecting to a TV
When connecting to a TV, images can be displayed on wider screen. Using slide show function (➝p.93) together, you can have
fun with folks.
Plug the A/V cable (included) into
the A/V OUT (Audio/Visual
output) socket of the camera.
A/V OUT
socket
Video (yellow)
To terminals
AC-5VX
(sold separately)
Audio (white)
Plug the other end of the cable into the
audio/video input socket on the TV.
MEMO
• Plug the A/V cable (included) and the AC power adapter
correctly and push them in each terminal.
• See p.146 for the information of the AC power adapter.
• When connecting the A/V cable (included) to TV, the
camera’s screen is turned off.
• The image quality for movie playback is lower than for
still images.
• When connecting to a TV, even if you adjust the volume
from the
PLAYBACK VOLUME, the TV volume
cannot be changed. Refer to the instructions provided
with your TV for more information on audio/video input
for your TV.
• Use the AC-5VX (sold separately) when
FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix
S800 is connected to a TV for long periods.
Camera Connection
CAUTION
123
Using the AC power adapter (sold separately)
Always use a FUJIFILM AC Power Adapter AC-5VX (sold
separately) (➝p.141).
Use the AC power adapter to prevent losing power at
inconvenient times, such as when downloading
photographed images to your PC. You can take pictures
and play back images without worrying about depleting
the batteries.
DC IN 5V socket
Check that the camera is off. Plug the AC power adapter
connector into the DC IN 5V socket and then plug the AC
power adapter into the power outlet.
124
CAUTION
• Only connect and disconnect the AC power adapter
when the camera is off. Connecting or disconnecting
the AC power adapter while the camera is on
temporarily interrupts the power supply to the camera,
which will stop the recording of any images or movies
being shot. Failing to turn the camera off before
connecting/disconnecting can also result in damage to
the Memory Card, or malfunction during PC connection.
• The socket-outlet shall be installed near the equipment
and shall be easily accessible.
• The shape of the plug and socket-outlet depends on the
country of use.
• FUJIFILM is not responsible for any malfunction caused
by using any AC power adapter other than FUJIFILM
AC Power Adapter AC-5VX.
• Do not connect the AC power adapter to charge the AAsize Ni-MH (nickel-metal hydride) batteries. Use the
optional charger to charge the Ni-MH batteries.
MEMO
See p.146 for notes on using the AC power adapter.
Connecting Camera Directly to Printer — PictBridge Function
When a printer that supports PictBridge is
available, images can be printed by
connecting the camera directly to the
PictBridge-compatible printer without a PC.
B Connect the camera to a printer and turn the printer on.
Press w for about 1 second to turn the camera on.
“
USB” appears on
the screen.
USB
Connecting to a printer
A Connect the camera to your printer using the USB
cable.
C The following screen appears on the screen after a
moment.
;USB
socket
“Specifying images for
printing”
➝p.126
“Printing with DPOF setting”
➝p.127
PICTBRIDGE
TOTAL : 00000
AC-5VX
(sold separately)
00 SHEETS
SET
MEMO
Depending on the printer, some functions are disabled.
Camera Connection
FRAME
OK
MEMO
Use the AC-5VX (sold separately) when FinePix S5700 /
FinePix S700 / FinePix S5800 / FinePix S800 is
connected to a printer.
125
Connecting Camera Directly to Printer — PictBridge Function
Specifying images for printing
(PRINT WITH DATE / PRINT
WITHOUT DATE)
PRINT THESE FRAMES
TOTAL : 9 SHEETS
PICTBRIDGE
TOTAL : 00002
YES
D Press MENU/OK again to download the
data to the printer and start printing the
specified number of prints.
02 SHEETS
FRAME
OK
CANCEL
SET
MEMO
A Press p or q to display the frame (file)
for specifying PRINT setting.
B Press n or o to set a value.
Up to 99 sheets are printed.
To specify more PRINT settings, repeat steps A and B.
C Press MENU/OK to display the confirm
setting.
Even if MENU/OK is pressed with total number of images set
at 0 (zero), the screen printing once appears on the screen.
Press MENU/OK again and printing starts.
MEMO Printing with date
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
A Press DISP/BACK to
display the setting
display.
B Press n or o to select
PRINT WITH DATEE.
C Press MENU/OK.
CAUTION
PRINT WITH DATEE is not available when the camera
is connected to a printer that does not support date
printing.
126
Printing with DPOF setting
(u PRINT DPOF)
PRINT DPOF OK?
TOTAL : 9 SHEETS
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
YES
CANCEL
D Press MENU/OK again to download the
data to the printer and start printing the
specified frames (files) continuously.
A Press DISP/BACK to open the menu.
B Press n or o to select u PRINT DPOF.
CHECK
To select uPRINT DPOF, the DPOF settings must be
specified on FinePix S5700 / FinePix S700 / FinePix
S5800 / FinePix S800 beforehand (➝p.93).
CAUTION
Even when WITH DATEE is specified in the DPOF
settings (➝p.93), the date is not inserted on printers that
do not support date printing.
Continued Q
Camera Connection
C Press MENU/OK to display the confirm
setting.
127
Connecting Camera Directly to Printer — PictBridge Function
MEMO
MEMO
PRINTING
DPOF setting can be specified for images on internal
memory.
CAUTION
CANCEL
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be
canceled immediately or printing may stop midway
through.
When printing stops midway, briefly turn the camera off
and then on again.
Disconnecting the printer
A Check that “PRINTING” is not displayed on the
camera’s screen.
B Turn the camera off. Unplug the USB cable.
128
• In PictBridge function, images photographed on other
than a camera may not be printed.
• The camera cannot be used to specify printer settings
such as the paper size and print quality.
• Please connect the AC Power Adapter AC-5VX (sold
separately) to your camera.
• Use internal memory or a Memory Card that was
formatted on FinePix S5700 / FinePix S700 / FinePix
S5800 / FinePix S800.
• Movies cannot be printed.
• Images photographed with a camera other than FinePix
S5700 / FinePix S700 / FinePix S5800 / FinePix S800
may not be printed.
Installation on a Windows PC
Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
CPU
200 MHz Pentium minimum
(Windows XP/Vista users: 800MHz Pentium 4 or better recommended)
RAM
128 MB minimum (512 MB minimum for Windows Vista)
256 MB or better recommended (512 MB or better recommended for Windows Vista
users)
Hard disk space
Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Display
800 × 600 pixels or better, 16-bit color or better
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 pixels or better)
Internet connection*3
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k or better recommended
*1 Models with one of the above operating systems pre-installed.
*2 When you install the software, login using a system administrator account (e.g. “Administrator”).
*3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
Software Installation
Operating System*1
Windows 98 SE
Windows Millennium Edition (Windows Me)
Windows 2000 Professional*2
Windows XP Home Edition*2
Windows XP Professional*2
Windows Vista*2
129
Installation on a Windows PC
Z Recommended system
Operating System
Windows XP
Windows Vista
CPU
2 GHz Pentium 4 or better recommended
3 GHz Pentium 4 or better recommended
RAM
512 MB or better recommended
1 GB or better recommended
Hard disk space
2 GB or better
15 GB or better
Display
1024 × 768 pixels or better, Highest (32 bit) 1024 × 768 pixels or better, Highest (32 bit)
Internet connection
Broadband (ADSL, FTTH, CATV, etc.)
Broadband (ADSL, FTTH, CATV, etc.)
CAUTION
• Connect the camera directly to the PC using the USB cable. The software may not operate correctly when you use an extension
cable or connect the camera via a USB hub.
• When your PC has more than one USB port, the camera can be connected to either port.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
• Windows 95, Windows 98 and Windows NT cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
• When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for the FinePix Internet Service
are deleted from your PC. Click the [Register now] button, enter your registered user ID and password and download the menu
again.
130
Do not connect the camera to your PC
until the software installation is
completed.
1
CHECK
For Windows Vista users:
When loading the bundled CD-ROM on your PC, the
“AutoPlay” window may appear. In this case, click
“SETUP.exe”.
When “User Account Control” window appears, click
“Allow”.
Install FinePixViewer as instructed in the
Quick start guide.
Launching the installer manually
Installing other applications
A Double-click the “My Computer” icon.
* Windows XP users should click “My Computer” in the “Start”
menu.
Windows Vista users should click “Computer” in the “Start”
menu.
B Right-click “FINEPIX” (CD-ROM drive) in the “My
Computer” window (Windows Vista users: in the
“Computer” window) and select “Open”.
C Double-click “SETUP” or “SETUP.exe” in the CD-ROM
window.
You may see messages for installing ImageMixer VCD2 LE for
FinePix. Install this application as directed by the on-screen
instructions.
2
Install DirectX as directed by the on-screen
instructions and then restart your PC. If the
latest version of DirectX is already installed
on your PC, this installation is not
performed.
* The way file names are displayed differs as described below
depending on your PC settings.
-File extensions (3-letter suffixes indicating the file type)
may be shown or hidden. (e.g. Setup.exe or Setup)
-Text may be shown normally or all in uppercase (e.g. Setup
or SETUP).
• If the latest version is already installed, this window
does not appear.
• Do not remove the CD-ROM during this procedure.
3
After restarting the PC, a message appears
stating “Installation of the FinePixViewer
has been completed”.
Software Installation
CAUTION
131
Installation on a Mac OS X
Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Compatible Mac*1
Power Macintosh G3*2, PowerBook G3*2,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5,
MacBook, MacBook Pro, or Mac mini
Operating System
Mac OS X (compatible with version 10.3.9 to 10.4.8)
RAM
256 MB minimum
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Display
800 × 600 pixels or better, at least 32,000 colors
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 pixels or better)
Internet connection*3
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k or better recommended
*1 PowerPC, Intel processor loaded
*2 Models with a USB port as a standard feature
*3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CAUTION
• Connect the camera directly to the Macintosh using the USB cable. The software may not operate correctly if you use an extension
cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
132
1
Turn your Macintosh on and start up Mac
OS X. Do not launch any other applications.
2
When the bundled CD-ROM is loaded into
the CD-ROM drive, the “FinePix” icon
appears. Double-click the “FinePix” icon to
open the “FinePix” volume window.
3
4
Double-click on “Installer for MacOSX”.
The Installer setup dialog appears. Click the
[Installing FinePixViewer] button.
CAUTION
For more information on what is installed, click the [Read
Me First] button and [Using FinePixViewer] button.
5
The “Authenticate” dialog appears.
Enter the name and password for the
administrator account and then click the
[OK] button.*
* The administrator account is the user account used for
Mac OS X installation and you can confirm the user
account in the Accounts dialog in the System
Preferences.
The “License” dialog appears. Read the
agreement carefully and then, if you agree
to the terms of the Agreement, click the
[Accept] button.
7
The “Read me” dialog appears. Click the
[Continue] button.
8
The “FinePixInstallOSX” window appears.
Click the [Install] button to install
FinePixViewer.
Continued Q
Software Installation
6
133
Installation on a Mac OS X
9
The ImageMixer VCD2 LE for FinePix
installer automatically starts up and a
window showing the installation progress
appears (Installation may take several
minutes).
10 The “FinePixViewer installation completed”
13 Select “Other...” from “When a camera is
connected, open”.
14 Select “FPVBridge” from “FinePixViewer”
folder in the “Applications” folder and click
the [Open] button.
message dialog appears. Then click exit
button and close it.
CAUTION
When Safari is used as the Web browser, a message may
be displayed and the CD-ROM may not be removed. If
this happens, click the Safari icon in the Dock to make
Safari the active application and then select “Quit Safari”
in the “Safari” menu to shut down Safari.
11 Launch “Image Capture” from the
“Applications” folder.
12 Change the Image Capture settings.
Select “Preferences...” from the “Image
Capture” menu.
134
15 Select “Quit Image Capture” menu in the
“Image Capture” menu.
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
MEMO
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
Refer to Software
Installation (➝p.129, 132)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
CD-ROM
the PC before installing all
(Software for FinePix CX)
the software.
• Do not format the Memory Card in the camera on the
PC.
• Use the Memory Card with images taken by a
FUJIFILM Digital camera.
• When connecting to a PC, if the Memory Card contains
large image or movie files, connection or transmission
may take time or images may not be stored. In these
cases, use the Image Memory Card Reader (sold
separately), etc. Note that the Image Memory Card
Reader DPC-R1 is not compatible with the SD Memory
Card.
B Connect the camera to your PC using the USB cable.
;USB
socket
AC-5VX
(sold separately)
Software Installation
A Insert the Memory Card with images into the camera
(➝p.22).
You can use the xD-Picture Card and the SD
Memory Card with the FinePix S5700 / FinePix S700
/ FinePix S5800 / FinePix S800. In this Owner’s
Manual, these cards are expressed as “Memory
Card”.
CAUTION
C Press w for about 1 second to turn the camera on.
Continued Q
135
Connecting to a PC
136
CAUTION
D Set a PC.
• FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix
S800 is compatible with PTP (Picture Transfer
Protocol)/MTP (Media Transfer Protocol). A PTP/MTPcompatible camera is a camera which can recognize
the PC and printer automatically when connected.
• Always use the FUJIFILM AC Power Adapter AC-5VX
(sold separately). If the camera suddenly loses power
during data exchange, the Memory Card or internal
memory could be damaged.
• Do not disconnect the USB cable when the camera is
communicating with a PC. If disconnecting the USB
cable during communication, the files on the Memory
Card or internal memory may cause damage.
• In Mac OS X, you must set the automatic setup when
the first time you connect the camera to your PC.
• Make sure that USB cable is connected correctly and
pushed in.
• Perform pre-arranged steps to disconnect and turn off
the camera (➝p.137-138).
• When the camera and PC are exchanging data, the
indicator lamp blinks alternately green and orange.
• Auto power off is disabled during USB connection.
• Before replacing the Memory Card, always disconnect
the camera from the PC. See p.137, 138 for information
on the disconnection procedure.
• The camera and PC may be exchanging data even
when “Copying” disappears on your PC screen. Before
disconnecting the USB cable, always check that the
indicator lamp is off.
• Always use FinePixViewer to transfer images with voice
memos to a PC.
• When Windows 98 SE is used, the supplied software
must be installed first before connecting the camera to
a PC using the USB cable. The PC will not recognize
the camera if it is connected before the installation.
Windows 98 SE / Me / 2000 Professional /
Macintosh
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
• FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
* Screen for Windows 2000 Professional
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button, set
the Power switch to OFF to turn off the camera and then
disconnect it from the PC.
Windows XP / Vista
A The help message appears in the bottom-right corner
of your screen. This message will close when the
settings are completed. No action is required.
CAUTION
Disconnecting the camera
1
Windows
Once the image has been saved, the window below
appears (Save Image Wizard window). To disconnect
the camera, click the [Remove] button.
This step is not required for subsequent connections.
B FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button, set
the Power switch to OFF to turn off the camera and then
disconnect it from the PC.
Macintosh
Once the image has been saved, the window below
appears. To disconnect the camera, click the [OK]
button.
Software Installation
Proceed to “Using FinePixViewer” (➝p.138).
Continued Q
137
Connecting to a PC
2
A Slide the Power switch to turn the camera off.
B Unplug the USB cable from the camera.
Using FinePixViewer
Mastering FinePixViewer
For all information on FinePixViewer functions, refer to
“How to Use FinePixViewer” in the Help menu for details.
;USB socket
• What is explained in “How to Use FinePixViewer”...
“How to Use FinePixViewer” covers a range of topics,
including batch processing and ordering prints.
AC-5VX
(sold separately)
138
Example: Looking up slide shows
A Click “How to Use FinePixViewer” in the FinePixViewer
Help menu.
B Click “Basic Operation” and then click “Slide Show” in
the menu that appears.
C The “Slide Show” information appears. Press the “<<<”
key to view the previous page or the “>>>” key to view
the next page.
Uninstalling the software
Only perform this operation when you no longer require
the installed software or when the software was not
installed correctly.
To remove FinePixViewer
Windows
A Check that the camera is not connected to the PC.
B Quit all currently running applications.
C Open the “My Computer” (Windows XP/Vista users
should click “Control Panel” in the “Start” menu.)
window. Then open the “Control Panel” (Windows
Vista users: open the “Programs”) and double-click on
“Add/Remove Programs” (Windows Vista users:
“Programs and Features”).
53
To remove the driver
software
E When the message appears, click the [OK] button.
Check your selection carefully since the process
cannot be canceled once you click the [OK] button.
F Automatic uninstallation begins.
When uninstallation ends, click the [OK] button.
Macintosh
Quit FinePixViewer. Then drag the installed
FinePixViewer folder to the Trash and select “Empty
Trash” in the “Finder” menu.
Software Installation
D The “Add/Remove Programs Properties” (Windows
Vista users: “Programs and Features”) window
appears. Select the software to be uninstalled
(FinePixViewer or the driver) and then click the [Add/
Remove] button (Windows Vista users: [Uninstall/
Change] button).
53
139
System Expansion Option
By using FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix S800 together with other optional FUJIFILM products, your
system can be expanded to fill a wide range of uses.
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
Z Audio/Visual
Z Image
output
input/output to the PC
TV monitor
(commercially available)
USB
Personal Computer
(commercially available)
Audio/Visual
output
Z Printing
PC Card Adapter DPC-AD
USB
(PC card slot)
* This will not work with an
SD Memory Card.
SD Memory xD-Picture
Card
Card
PictBridge-compatible printer
(commercially available)
CompactFlash™
Card Adapter DPC-CF
DPC-C
F
Printer
(commercially available)
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
for
xD-P
icture
Card
(CF card slot)
* This will not work with an SD
Memory Card.
140
Accessories Guide
Visit the FUJIFILM web site for the latest information on camera accessories.
http://www.fujifilm.com/products/digital/index.html
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
• xD-Picture Card
Use the following xD-Picture Cards:
256MB/512MB/1GB/2GB
There are two types of xD-Picture Card: standard type and Type M (containing “M” in the model
number, such as DPC-M1GB).
FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix S800 is compatible with Type M, however they
may not be compatible depending on the device used (Image Memory Card Reader, etc.).
• AC Power Adapter AC-5VX
Use the AC-5VX when taking pictures or play back images for long periods or when FinePix
S5700 / FinePix S700 / FinePix S5800 / FinePix S800 is connected to a PC.
* The shape of the AC power adapter, the plug, and power outlet depend on the country.
• PC Card Adapter DPC-AD
The PC Card Adapter allows the xD-Picture Card and SmartMedia to be used as a PC Card Standard
ATA-compliant (PCMCIA 2.1) PC card (Type u).
-Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 2 MB to 128 MB.
* This is not compatible with the SD Memory Card.
DPCCF
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
for
xD-P
ictur
e Card
Appendices
• CompactFlash™ Card Adapter DPC-CF
Loading an xD-Picture Card into this adapter allows you to use the card as a CompactFlash card (Type
s).
* This is not compatible with the SD Memory Card.
141
MEMO
142
Using Your Camera Correctly
Read this information and the “Safety Notes” (➝p.176), to
make sure you use your camera correctly.
Z Places to Avoid
Do not store or use the camera in the following types of
locations:
• In the rain or in very humid, dirty, or dusty places
• In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer
• Extremely cold places
• Places with strong vibration
• Places with smoke or steam
• Places subject to strong magnetic fields (such as near
motors, transformers, or magnets)
• In contact with chemicals such as pesticides
• Next to rubber or vinyl products
Z Damaged by Water or Sand
FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix
S800 can be damaged on the inside and outside by water
and sand. When you are at the beach or close to water,
make sure that the camera is not damaged by water or
sand. Take care not to place the camera on a wet surface.
Z Cleaning Your Camera
• Use a blower brush to remove any dust on the lens,
LCD monitor or viewfinder, and then gently wipe the
camera with a soft, dry cloth. If any soil remains, apply
a small amount of lens cleaning liquid to a piece of
FUJIFILM lens cleaning paper and wipe gently.
• Do not scratch hard objects against the lens, LCD
monitor or viewfinder.
• Clean the body of the camera with a soft, dry cloth. Do
not use volatile substances or cleaning products these
items can cause damage.
Z Using the Camera When Traveling
When traveling overseas, do not place your camera in the
check-in baggage. Baggage can be subjected to violent
shocks, and the camera may be damaged inside or
outside.
Appendices
Z Damaged by Condensation
If the camera is carried from a cold location into a warm
place, water droplets (condensation) may form on the
inside of the camera or on the lens. When this occurs, turn
the camera off and wait an hour before using the camera.
Condensation may also form on the Memory Card. In this
event, remove the Memory Card and wait a short time.
Z When the Camera is Not Used or is stored Periods
of Time
If you do not intend to use the camera for a long period of
time, remove the batteries and the Memory Card.
143
Power Supply and Batteries
Applicable Batteries
• In the camera, use AA-size alkaline or Ni-MH (nickelmetal hydride) rechargeable batteries.
Do not use AA-size manganese, nickel-cadmium (NiCd) or lithium batteries in your FinePix S5700 / FinePix
S700 / FinePix S5800 / FinePix S800 because the heat
created by the batteries could damage the camera or
cause it not to work.
• The life of alkaline batteries varies between brands. The
life of batteries you purchase may be shorter than those
provided with the camera.
Notes on the Batteries
Incorrect use of the batteries could cause them to leak,
become hot, ignite, or burst. Always observe the
precautions given below.
• Do not heat the batteries or throw them into a fire.
• Do not carry or store batteries with metal objects such
as necklaces or hairpins.
• Do not expose the batteries to water, and keep batteries
from getting wet or stored in moist locations.
• Do not attempt to take apart or change the batteries,
including battery casings.
• Do not subject the batteries to strong impacts.
• Do not use batteries that are leaking, deformed,
discolored.
• Do not store batteries in warm or humid places.
• Keep the batteries out of reach of babies and small
children.
• Make sure that the battery polarity (+ and ,) is
correct.
• Do not use new with used batteries. Do not use charged
and discharged batteries together.
• Do not use different types or brands of batteries at the
same time.
144
• If you do not intend to use the camera for a long period
of time, remove the batteries from the camera. Note if
the camera is left with the batteries removed, the time
and date settings are cleared.
• The batteries feel warm right after being used. Before
removing the batteries, turn the camera off and wait for
the batteries to cool down.
• Since batteries do not work well in cold weather or
locations, warm the batteries by placing them inside
your garments before use. Batteries do not work well
when cold. They will work again when the temperature
returns to normal.
• Soil (such as fingerprints) on the battery terminals
makes the batteries charge less reducing the number of
images. Carefully wipe the battery terminals with a soft
dry cloth before loading.
If any liquid at all leaks from the batteries, wipe the
battery compartment thoroughly and then load new
batteries.
If any battery fluid comes into contact with your hands
or clothing, flush the area thoroughly with water. Note
that battery fluid can cause loss of eyesight if it gets
into your eyes. If this occurs, do not rub your eyes.
Flush the fluid out with clean water and contact your
physician for treatment.
Using the AA-size Ni-MH batteries correctly
CAUTION
Do not use the “Discharging rechargeable batteries”
function when alkaline batteries being used.
• To charge Ni-MH batteries, use the quick battery
charger (sold separately). Refer to the instructions
supplied with the charger to make sure that the charger
is used correctly.
• Do not use the battery charger to charge other batteries.
• Note that the batteries feel warm after being charged.
• Due to the way the camera is constructed, a small
amount of current is used even when the camera is
turned off. Note in particular that leaving Ni-MH
batteries in the camera for a long period will
overdischarge the batteries and may render them
unusable even after recharging.
• Ni-MH batteries will self-discharge even when not used,
and the time for which they can be used may be
shortened as a result.
• Ni-MH batteries will deteriorate rapidly if
overdischarged (e.g. by discharging the batteries in a
flashlight). Use the “Discharging rechargeable
batteries” function provided in the camera to discharge
the batteries.
• Ni-MH batteries have a limited service life. If a battery
can only be used for a short time even after repeated
discharge-charge cycles, it may have reached the end
of its service life.
Z Disposing of Batteries
When disposing of batteries, do so in accordance with
your local waste disposal regulations.
Appendices
• As a power source in digital cameras, AA-size Ni-MH
batteries (referred to hereafter as Ni-MH batteries) are
superior to alkaline batteries in several ways, such as
allowing more shots to be taken with the camera.
However, care must be taken with the way Ni-MH
batteries are used if their original performance is to be
maintained.
• Ni-MH batteries left unused in storage for long periods
can become “deactivated”. Also, repeatedly charging
Ni-MH batteries that are only partially discharged can
cause them to suffer from the “memory effect”.
Ni-MH batteries that are “deactivated” or affected by
“memory” suffer from the problem of only providing
power for a short time after being charged. To prevent
this problem, discharge and recharge them several
times using the camera’s “Discharging rechargeable
batteries” function. By repeating this cycle several
times, the temporary reduction in performance caused
by “memory” or “deactivation” can be remedied and the
batteries can be restored to their original performance
levels.
Deactivation and memory are specific to Ni-MH
batteries and are not in fact battery faults. See p.146147 for the procedure for “Discharging rechargeable
batteries”.
Continued Q
145
Power Supply and Batteries
AC Power Adapter
Always use the AC Power Adapter AC-5VX with the
camera.
The use of an AC power adapter other than AC-5VX can
be damaged to your digital camera.
• Use the AC power adapter for indoor use only.
• Plug the connection cord plug securely into the DC input
terminal of the FUJIFILM Digital camera.
• Turn off the FUJIFILM Digital camera before
disconnecting the cord from the FUJIFILM Digital
camera’s DC input terminal. To disconnect, pull out the
plug gently. Do not pull on the cord.
• Do not use the AC power adapter with any device other
than your camera.
• During use, the AC power adapter will become hot to
the touch. This is normal.
• Do not take apart the AC power adapter. Doing so could
be dangerous.
• Do not use the AC power adapter in a hot and humid
place.
• Do not subject the AC power adapter to strong shocks.
• The AC power adapter may emit a humming. This is
normal.
• If used near a radio, the AC power adapter may cause
static. If this happens, move the camera away from the
radio.
146
Discharging rechargeable
batteries
The Discharging rechargeable batteries function can only
be used with Ni-MH batteries.
The Discharging rechargeable batteries function should
not be used with alkaline batteries as it will completely
drain the battery charge.
Use the Discharging rechargeable batteries function in
the following situations:
• When the batteries only last for a short time after being
charged normally
• When the batteries have not been used for a long period
• When you purchase new Ni-MH batteries
Do not use the Discharging rechargeable batteries
function while using the AC power adapter. In these
situations, the Ni-MH batteries will not be discharged due
to the external power supply.
To discharge rechargeable batteries:
DISCHARGE
SET - UP
AUTO POWER OFF
TIME DIFFERENCE
BACKGROUND COLOR
DISCHARGE
VIDEO SYSTEM
DISCHARGE OK?
IT MAY TAKE A WHILE
FOR DISCHARGING
ENGLISH
2 MIN
OK
CANCEL
SET
NTSC
G Press q.
A Press w to turn the camera on.
B Press MENU/OK to display the menu on
the screen.
H Press MENU/OK.
C Press n or o to select U SET-UP.
I Press p or q to select OK.
D Press q to display the SET-UP menu.
E Press p or q to select
.
J The screen changes and discharging
begins.
When the battery level indicator blinks red
and discharging ends, the camera turns
off.
CAUTION
DISCHARGE.
To cancel discharging, press DISP/BACK.
Appendices
F Press n or o to select
147
Notes on the xD-Picture Card™, the SD Memory Card and the Internal Memory
Z Handling Memory Card
• When inserting the Memory Card into the camera, hold
the Memory Card straight as you push it in.
• Never remove the Memory Card or turn the camera off
during data recording or erasing (Memory Card
formatting) as this could be damaged to the Memory
Card.
• The use of xD-Picture Cards is recommended with
FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix
S800.
The recording quality cannot be guaranteed when xDPicture Cards other than those manufactured by
FUJIFILM are used.
• The Memory Card may feel warm when it is removed
from the camera after taking pictures. This is normal.
• Do not put labels on the Memory Card. Peeling labels
can cause the camera not to work properly.
MEMO Type M and H of xD-Picture Card
• Type M
There are two types of xD-Picture Card: standard type
and Type M (containing “M” in the model number, such
as DPC-M2GB).
FinePix S5700 / FinePix S700 / FinePix S5800 / FinePix
S800 is compatible with Type M.
• Type H
Type H and M share the same compatibility.
• Usable USB drive
Type H cannot be used with xD-Picture Card USB
drive DPC-UD1, while Type M can.
148
Z Internal Memory
• Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
DVD-R, CD-R, CD-RW, hard disk, etc.).
• Data stored in the camera’s internal memory cannot be
guaranteed in the event that the camera is submitted for
repairs.
• When the camera is repaired, any data stored in the
camera’s internal memory is subject to checking by the
repairer.
Z Using Memory Card or Internal Memory with a PC
• When taking pictures using a Memory Card or internal
memory that has been used on a PC, reformat the
Memory Card using your camera.
• When formatting, a directory (folder) is created. Image
data is then recorded in this directory.
• Do not change or delete the directory (folder) or file
names on the Memory Card or internal memory
because this will make it impossible to use the Memory
Card or internal memory in your camera.
• Always use the camera to erase image data.
• To edit image data, copy or transfer the image data to
the PC and edit the copied or transferred data.
Warning Displays
The table below lists the warnings that are displayed on the screen.
Warning Displayed
(Lit red)
V (Blinking red)
Explanation
There is a strong likelihood of camera shake
because the shutter speed is slow.
Use flash photography. A tripod may be
recommended, depending on the scene and mode.
The AF (autofocus) cannot work effectively.
• If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
• Use AF lock to take the picture (➝p.34).
• Select Macro mode when taking close-up shots.
The camera cannot shoot the picture at the correct
brightness due to too bright or dark shooting
condition.
The picture can be taken, but the correct brightness
(exposure) will not be obtained.
FOCUS ERROR
Camera malfunction or fault.
• Turn the camera on again, taking care not to touch
the lens.
• Turn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
Memory Card is not inserted when transferring
images.
Insert a Memory Card.
• The Memory Card or internal memory is not
formatted.
• The Memory Card was formatted on a PC.
• The Memory Card contact area is soiled.
• Format the Memory Card or internal memory on
the camera (➝p.120).
• Format the Memory Card on the camera.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.120). If the message still
appears, replace the Memory Card.
• Camera fault.
• Contact your FUJIFILM dealer.
ZOOM ERROR
NO CARD
CARD NOT INITIALIZED
Appendices
Load new or fully charged batteries.
{
Aperture/
Shutter speed display
(Lit red)
Remedy
The batteries are low or completely out of charge.
Continued Q
149
Warning Displays
Warning Displayed
Explanation
• The Memory Card contact area is soiled.
• The Memory Card format is incorrect.
CARD ERROR
\ MEMORY FULL
• Camera fault.
• Contact your FUJIFILM dealer.
• The Memory Card is damaged.
• Inserted Memory Card is not compatible with your • Insert a compatible Memory Card that is operationcamera.
checked at FUJIFILM Corporation.
The internal memory or Memory Card is full.
Y MEMORY FULL
WRITE ERROR
Remedy
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.120). If the message still
appears, replace the Memory Card.
Erase some images in internal memory or Memory
Card (➝p.44), or use a Memory Card that has ample
free space.
• The data could not be recorded due to an Memory • Re-insert the Memory Card or turn the camera off
and then on again. If the message still appears,
Card error or a connection error between the
Memory Card and camera.
contact your FUJIFILM dealer.
• The image cannot be recorded as it is too large to • Use a new Memory Card.
fit in the available space on the Memory Card.
• The Memory Card or internal memory is not
• Format the Memory Card or internal memory on
formatted.
the camera (➝p.120).
PROTECTED CARD
The SD Memory Card switch is slide to the “Lock”
side.
Unlock the protection by sliding it back (➝p.23)
INTERNAL MEMORY
IS FULL
The data could not be recorded or copied since the
internal memory is full.
Erase some images from the internal memory
(➝p.44), or use a Memory Card that has ample free
space.
The timing for recording was incorrect because the
Memory Card was formatted on a PC.
Use a Memory Card that was formatted on the
camera.
INSERT A NEW CARD.
r BUSY
The frame number has reached 999-9999.
FRAME NO. FULL
150
A Insert a formatted Memory Card into the camera.
B Set RENEW as the FRAME NO. setting in the
U SET-UP menu (➝p.117).
C Start taking pictures (The frame number starts
from “100-0001”).
D Set CONTINUOUS as the FRAME NO. setting in
the U SET-UP menu.
Warning Displayed
Explanation
Remedy
• The played back file was not recorded correctly.
• The Memory Card contact area is soiled.
READ ERROR
• This file cannot be played back.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.120). If the message still
appears, replace the Memory Card.
• Camera fault.
• Contact your FUJIFILM dealer.
• An attempt was made to play back the image or the • The movie and image cannot be played back.
movie that was not recorded on this camera.
TOO MANY FRAMES
An attempt was made to show 5,000 or more image No more than 4,999 images can be shown by date
by date sorting.
sorting.
• An attempt was made to erase a protected file.
PROTECTED FRAME
# ERROR
\ NO IMAGE
Y NO IMAGE
` CAN NOT TRIM
DPOF FILE ERROR
• The voice memo file is faulty.
• Camera fault.
• The voice memo cannot be played back.
• Contact your FUJIFILM dealer.
An attempt was made to transfer images from the
Memory Card or internal memory that memory was
empty.
It is impossible to copy.
An attempt was made to trim a 0.3M image.
The image cannot be trimmed.
• An attempt was made to trim an image shot using The image cannot be trimmed.
a camera other than FinePix S5700 / FinePix S700
/ FinePix S5800 / FinePix S800.
• The image is damaged.
Prints were specified for 1000 or more frames in the The maximum number of frames for which prints can
DPOF frame settings.
be specified on the same Memory Card is 999.
Copy the images for which you want to order prints
onto another Memory Card and then specify the
DPOF settings.
Continued Q
Appendices
CAN NOT TRIM
• An attempt was made to add a voice memo to
protected file.
• An attempt was made to rotate a protected file.
• Protected files cannot be erased. Remove the
protection (➝p.98).
• Protected files cannot be added to voice memos.
Remove the protection (➝p.98).
• Protected files cannot be rotated. Remove the
protection (➝p.98).
151
Warning Displays
Warning Displayed
CAN NOT SET DPOF
Explanation
Remedy
An attempt was made to specify DPOF settings for a DPOF printing cannot be used with this image
movie or an image that is not supported by DPOF. format.
r CAN NOT SET DPOF
CAN NOT ROTATE
r CAN NOT ROTATE
COMMUNICATION
ERROR
An attempt was made to rotate a movie or an image These images cannot be rotated by image formats.
shot using a camera other than FinePix S5700 /
FinePix S700 / FinePix S5800 / FinePix S800.
The camera is not connected to a PC or printer.
• Check that the USB cable is connected correctly.
• Check that your printer is turned on.
Displayed for PictBridge.
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Displayed for PictBridge.
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
Displayed for PictBridge.
• Refer to the user manual for the printer being used
and check whether the printer supports the JFIFJPEG or Exif-JPEG image format. If not, the printer
cannot print the images.
• Movies cannot be printed.
• Was the image data photographed using FinePix
S5700 / FinePix S700 / FinePix S5800 / FinePix
S800?
You may not be able to print some images
photographed on other cameras.
PRINTER ERROR
PRINTER ERROR
RESUME?
CANNOT BE PRINTED
152
Troubleshooting
Z Getting ready
Matters
Problems
Nothing happens
when sliding the
Power switch or
pressing w.
Batteries and
power supply
Batteries run out
quickly.
Possible causes
Solutions
Page
The batteries have run out.
Load new or fully charged batteries.
The batteries are loaded backward.
Load the batteries in the corrected
direction.
20
The batteries cover or slot cover is not
closed securely.
Close the batteries cover or slot cover
securely.
20
The camera and AC power adapter are not Connect the camera and AC power
connected correctly.
adapter correctly.
124,
146
The camera has been left for a long period Load the batteries or connect the AC
with batteries and AC power adapter
power adapter, and wait a short time
removed.
before turning the camera on.
19,
25,
124
Camera is used in extremely cold
conditions.
Put the batteries in your pocket or another
warm place to heat it and then load it into
the camera just before you take a picture.
19,
21,
144
The battery terminals are soiled.
Wipe the battery terminals with a clean,
dry cloth.
21,
144
Same batteries have been used for a long The batteries can no longer be recharged.
period.
Load a new batteries.
The rechargeable batteries (if used) have Use the rechargeable battery discharging
function to restore the rechargeable
become deactivated, or the battery
batteries to full capacity.
capacity has diminished due to the
memory effect.
19,
21,
144
146
Load new or fully charged batteries.
19,
21,
144
The camera and AC power adapter are not Connect the camera and AC power
connected correctly.
adapter correctly.
124,
146
Continued Q
Troubleshooting
The batteries have run out.
Power cuts out
during operation.
19,
21,
144
153
Troubleshooting
Z Setting menu etc.
Matters
LCD monitor
display
Problems
Screens are not
displayed in
English.
Possible causes
Solutions
A language other than English is selected Select ENGLISH.
in the
setting in the SET-UP
menu.
Page
29
Z Shooting
Matters
Basic operations
Problems
No photograph is
taken when
pressing the
shutter button.
Possible causes
Solutions
Insert a new Memory Card or erase some
22, 44
unnecessary frames.
The Memory Card or internal memory is
not formatted.
Format the Memory Card or internal
memory on the camera.
113,
120
The Memory Card contact area is soiled.
Wipe the Memory Card contact area with a
soft, dry cloth.
22,
148
The Memory Card is damaged.
Insert a new Memory Card.
22
The batteries have run out.
Load new or fully charged batteries.
19,
21,
144
The Auto power off function has turned the Turn the camera on.
camera off.
The screen
darkens after
taking a picture.
Focusing
154
Camera has
difficulty in
focusing on the
subject.
Page
The Memory Card or internal memory is
full.
You took pictures with flash.
The screen may darken for charging flash.
Wait a short time.
25
68
You took a close-up shot without selecting Select Macro mode.
Macro mode.
66
You photographed scenery with Macro
mode selected.
Cancel Macro mode.
66
You are shooting a subject that is not
suited to autofocusing (➝p.35).
Use AF/AE lock or “MF” Manual focus
mode to take the picture.
34, 86
Matters
Macro
Problems
Cannot set the
camera to Macro
(close-up) mode.
Possible causes
Solutions
The Shooting mode is set to m, ,, .,
8,
,
,
,
, or
.
Page
Change the Shooting mode.
51
The shutter button was pressed while the Wait until the charging is completed before
flash was charging.
pressing the shutter button.
The Shooting mode is set to
, or .
Cannot use the
flash.
Flash
, ,,
, Change the Shooting mode.
The batteries have run out.
68
51
Load new or fully charged batteries.
19,
21,
144
Continuous shooting is selected.
Set continuous shooting to OFF.
71
The flash is set to C SUPPRESSED
FLASH mode.
Set to another flash mode excluding the C
SUPPRESSED FLASH mode.
67
> Super macro mode is selected.
Cancel > Super macro mode.
66
Set to another flash mode excluding the C
SUPPRESSED FLASH mode.
67
Set to d FORCED FLASH mode when you
want to take pictures with flash.
67
The flash settings The Shooting mode is set to anything other
are restricted and than m and N.
cannot be
selected.
The flash settings are restricted because
the camera settings are tailored to the
scene being shot. Change the Shooting
mode for a wider range of flash settings.
51, 68
The playback
image is dark
even though the
flash was used.
The subject is too far away.
Move to within the effective flash range
before taking the picture.
66, 68
Your finger was covering the flash.
Hold the camera correctly.
31
Continued Q
Troubleshooting
The flash is set to C SUPPRESSED
Cannot pop up the FLASH mode.
flash.
The shooting condition is bright enough
not to need flash.
155
Troubleshooting
Matters
Problems
Possible causes
143
{ appeared when taking pictures.
Check the focus on the subject and take
pictures.
31,
34,
149
It may cause camera shake. Hold the
camera steadily.
33,
149
appeared when taking pictures.
The picture was taken with a slow shutter This is a characteristic of CCDs and does
There is speckling
speed (long exposure) in a highnot indicate a camera fault.
on the image.
temperature environment.
AC power adapter was connected or
disconnected during turning the camera
Photographed
Recording images images or movies on.
are not recorded.
Continuous
shooting
156
Page
Clean the lens.
The image is
blurred.
Photographed images
Solutions
The lens is dirty.
Only 1 frame can A picture is taken using self-timer when
setting LONG PERIOD continuous
be shot even
though continuous shooting mode.
shooting mode
was set.
Connect or disconnect the AC power
adapter only when the camera is off.
Failing to turn the camera off first can
result in damage to the Memory Card or
malfunctions during PC connection.
Only 1 frame can be shot when using
LONG PERIOD continuous shooting
mode and Self-timer mode together.
–
124,
146
71
Z Playing back
Matters
Problems
Possible causes
The camera volume is set too low.
Playing back
movie / voice
memo
The camera does
The microphone was blocked during
not emit any
shooting/recording.
sound.
There is something covering the speaker
during playback.
Some frames may be protected.
Erasing FRAME
does not erase the
frame.
Erasing
Frame No.
Solutions
Page
Adjust the volume.
104,
112,
113,
119
Take care not to block the microphone
during shooting/recording.
14,
102,
108
Make sure that the speaker is uncovered.
14,
103,
112
Unprotect frames using the camera on
which the protection was first applied.
98
Erasing ALL
FRAMES does
not erase all the
frames.
You opened the battery cover without
CONTINUOUS in
turning the camera off when replacing the
the frame number
batteries or Memory Card.
setting does not
function.
Always turn the camera off when replacing
the batteries or Memory Card. Opening the
battery cover without turning the camera
off may cause the frame number memory
to not function.
25
Continued Q
Troubleshooting
157
Troubleshooting
Z Connecting
Matters
Problems
Possible causes
The camera is not connected to the TV
correctly.
Connecting to TV
The included A/V cable was connected
There is no image during movie playback.
or sound on the
“TV” is selected as the TV input.
TV.
The video output setting is incorrect.
The TV image is
black and white.
PC does not
Connecting to PC recognize the
camera.
Connecting to
printer
158
Cannot print with
PictBridge.
Solutions
Connect the camera and TV correctly.
After the movie playback mode is stopped,
connect the camera and TV correctly.
Set the TV input to “VIDEO”.
Change the setting to NTSC or PAL.
The TV volume is turned down.
Adjust the volume.
The video output setting is incorrect.
Change the setting to NTSC or PAL.
The USB cable is not correctly connected Set up the camera, and connect the USB
to the PC or camera.
cable correctly.
• The USB cable is not correctly
connected to the printer or camera.
• The printer is not turned on.
• Set up the camera, and connect the USB
cable correctly.
• Turn the printer on.
Page
123
111,
123
–
113,
115
–
113,
115
135
125
Z Others
Matters
Problems
Possible causes
Camera malfunction may be caused
temporarily.
Nothing happens
when pressing the
buttons on the
The batteries have run out.
camera.
Solutions
Page
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again.
19,
20,
124,
146
Load new or fully charged batteries.
19,
21,
144
Camera operation
etc.
The camera no
longer works
correctly.
Camera malfunction may be caused
temporarily.
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again. If you think the
camera is faulty, contact your FUJIFILM
dealer.
19,
20,
124,
146
Troubleshooting
159
Specifications
Specifications
System
Model
Digital camera FinePix S5700 / FinePix S700
Digital camera FinePix S5800 / S800
Effective pixels
7.1 million pixels
8.0 million pixels
CCD
1/2.5-inch CCD
Storage media
Internal memory (approx. 27 MB)
Internal memory (approx. 26 MB)
xD-Picture Card (16/32/64/128/256/512 MB/1 GB/2 GB)/SD Memory Card (FUJIFILM recommendation
(➝p.22))
File format
160
Still image: DCF-compliant
Compressed: Exif ver.2.2 JPEG, DPOF-compatible
*Design rule for Camera File System compliant/DPOF compatible
Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound
Number of recorded pixels 3072 × 2304 pixels/3072 × 2048 pixels/
(Still image)
2304 × 1728 pixels/1600 × 1200 pixels/
640 × 480 pixels ( /%/4/2/`)
3264 × 2448 pixels/3264 × 2176 pixels/
2304 × 1728 pixels/1600 × 1200 pixels/
640 × 480 pixels (i/%/4/2/`)
File size
See the table on the p.164
See the table on the p.165
Lens
Fujinon 10× optical zoom lens
F3.5-F3.7
Focal length
f=6.33 mm-63.3 mm
(Equivalent to approx. 38 mm-380 mm on a 35 mm camera)
Digital zoom
Approx. 4.8× (10× optical zoom lens is used
together: Max. zoom scale: approx. 48×)
Aperture (Wide-angle)
F3.5 to F13.6, 7 steps in 1/3 EV increments Manual/Auto selectable
Focal range
Normal:
Approx. 5.1× (10× optical zoom lens is used
together: Max. zoom scale: approx. 51×)
Wide-angle: approx. 30 cm (1.0 ft.) to infinity (In High-speed shooting mode: approx. 1.0 m
(3.3 ft.) to infinity)
Telephoto: approx. 1.0 m (3.3 ft.) to infinity (In High-speed shooting mode: approx. 1.0 m
(3.3 ft.) to infinity)
Macro:
Wide-angle: 4 cm to 3.0 m (1.6 in. to 9.8 ft.)
Telephoto: 60 cm to 3.0 m (2.0 ft. to 9.8 ft.)
Super macro: approx. 1 cm to 1.0 m (0.4 in. to 3.3 ft.) (Wide-angle only)
System
Sensitivity
Auto/Auto (800)/Auto (400)/Equivalent to 64/100/200/400/800/1600 (Standard output sensitivity)
Photometry
TTL 256-zones metering Multi, Spot, Average
Exposure control
Program AE (When using P mode : Program Shift is enabled)/Shutter priority AE/Aperture priority AE/
Manual exposure
Scene position
(NATURAL LIGHT),
(NATURAL & d), m (PORTRAIT), , (LANDSCAPE), . (SPORT), 8
(NIGHT),
(FIREWORKS),
(SUNSET),
(SNOW),
(BEACH),
(MUSEUM),
(PARTY),
(FLOWER),
(TEXT)
Picture Stabilization
Available
Exposure compensation
–2 EV to +2 EV in 1/3 EV-step increments (N, <, M)
Shutter speed
B,
,
,
, m, ,, .,
,
,
,
,
8: 3 sec. to 1/1000 sec.*
: 4 sec. to 1/2 sec.*
: 1/4 sec. to 1/1000 sec.* (flash only).
N, <, M: 4 sec. to 1/1000 sec.*
>: 4 sec. to 1/1000 sec.* *depend on Exposure mode
Continuous shooting
Top-3:
Auto bracketing
± 1/3 EV, ± 2/3 EV, ± 1 EV
Focus
Mode: Single AF, Continuous AF, Manual focus
AF system: TTL contrast-type, AF-assist illuminator
AF frame selection: AF (CENTER), AF (MULTI), AF(AREA)
,
: 1/4 sec. to 1/1000 sec*.
Number of recorded frames: up to 3 frames
(FinePix S5700 / FinePix S700: max. 1.4 frames/sec.)
(FinePix S5800 / FinePix S800: max. 1.3 frames/sec.)
Long-period: Number of recorded frames:
FinePix S5700 / FinePix S700: Depend on memory size. 1.7 sec. interval at
N
depending on quality level. (Max. 0.6 frames/sec.)
FinePix S5800 / FinePix S800: Depend on memory size. 1.8 sec. interval at i N
depending on quality level. (Max. 0.6 frames/sec.)
Continued Q
161
Specifications
System
White balance
Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight), Fluorescent (Warm White),
Fluorescent (Cool White), Incandescent) /Custom
Self-timer
Approx. 2 sec./10 sec.
Flash type
Popping the flash up automatically
Effective range: (S: 800):
approx. 50 cm-6.2 m (1.6 ft.-20 ft.)
(Macro):
approx. 30 cm-3.0 m (1.0 ft.-9.8 ft.)
Flash mode
Auto, Red-eye Reduction, Forced Flash, Suppressed Flash, Slow Synchro, Red-eye Reduction + Slow
Synchro
Viewfinder
0.24 inches, approx. 230,000 pixels low-temperature polysilicon TFT color LCD finder, Approx. 97%
coverage
LCD monitor
2.5 inches, Aspect ratio: 4:3; approx. 230,000 pixels low-temperature polysilicon TFT color LCD monitor,
Approx. 97% coverage
Movie
640 × 480 pixels/320 × 240 pixels (%/$)
(30 frames per second with monaural sound)
A series of continuous image can be recorded depending on the available space on an Memory Card or
internal memory.
A movie recording will stop automatically when a movie file becomes approx. 2GB. If you want to continue
recording another movie, press the shutter button again. The available recording time is displayed based
on approx. 2GB.
Photography functions
High-speed shooting, Best framing, Post shot assist window, Frame No. memory, Histograms
Playback functions
Trimming, Slide Show, Multi-frame playback, Sorting by date, Image rotate, Histograms (Highlight
warning), Voice memo
Other functions
PictBridge, Exif print, Language (
, English, Francais, Deutsch, Español, Italiano,
,
,
,
, Português, Nederlands,
,
, Magyar, Polski, Svenska), Time difference, FinePix
photo mode(p-mode), Discharging rechargeable batteries
Input/Output Terminal
162
A/V OUT
(Audio/Visual output)
NTSC/PAL-type (with monaural sound)
Digital input/output
USB 2.0 Full-Speed, PTP (Picture Transfer Protocol)/MTP (Media Transfer Protocol)
DC input socket
AC Power Adapter AC-5VX (sold separately)
Power Supply and Others
Power supply
Guide to the number of
available frames for battery
operation
Use one of the following:
• 4× AA-size alkaline batteries
• 4× AA-size Ni-MH (Nickel-Metal Hydride) batteries (sold separately)
• AC Power Adapter AC-5VX (sold separately)
Battery Type
With LCD monitor ON
With viewfinder (EVF) ON
Alkaline batteries
Approx. 300 frames
Approx. 300 frames
Ni-MH batteries 2500 mAh
Approx. 500 frames
Approx. 500 frames
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using alkaline batteries, use the batteries supplied with the camera. You can use Ni-MH batteries
also. The storage media should be xD-Picture Card.
Pictures should be taken at a temperature of +23°C (+73°F), with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original position
every 30 seconds, the flash used at full power every second shot and the camera turned off and then on
again once every 10 shots.
• Note: Because the number of available shots varies depending on the capacity of alkaline batteries or
the level of charge in Ni-MH batteries, the figures shown here for the number of available shots
using batteries are not guaranteed.
The number of available shots will also decline at low temperatures.
Camera dimensions (W/H/D) 106.1 mm × 75.7 mm × 80.7 mm/4.2 in. × 3.0 in. × 3.2 in. (not including accessories and attachments)
Camera mass (weight)
FinePix S5700 / FinePix S700: Approx. 306 g/10.8 oz. (not including accessories, batteries and Memory
Card)
FinePix S5800 / FinePix S800: Approx. 307 g/10.8 oz. (not including accessories, batteries and Memory
Card)
Weight for photography
FinePix S5700 / FinePix S700: Approx. 400 g/14.1 oz. (including batteries and Memory Card)
FinePix S5800 / FinePix S800: Approx. 402 g/14.2 oz. (including batteries and Memory Card)
Operating Conditions
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
163
Specifications
FinePix S5700 / FinePix S700
Z Standard number of available frames/recording time per xD-Picture Card, SD Memory Card and internal memory
The number of available frames and recording time is approximate. Actual number of frames and recording time varies
depending on the types of Memory Card or shooting condition. Also, the number of frames and recording time displayed in the
LCD monitor may not decrease regularly.
Quality setting
Number of recorded
pixels
Image data size
Internal memory
(approx. 27 MB)
F
N
3072 × 2304
3.5 MB
%
4
2
3072 × 2048 2304 × 1728 1600 × 1200
1.8 MB
1.6 MB
980 KB
630 KB
`
%
(30 fps)
$
(30 fps)
640 × 480
640 × 480
320 × 240
130 KB
–
–
47 sec.
15
17
27
44
215
30 sec.
4
9
10
16
25
124
17 sec.
27 sec.
32 MB
9
18
20
32
51
249
34 sec.
55 sec.
64 MB
18
36
41
64
102
499
70 sec.
1.8 min.
128 MB
36
73
82
128
204
999
2.3 min.
3.7 min.
256 MB
73
146
164
257
410
1999
4.7 min.
7.4 min.
512 MB
147
293
329
515
819
3995
9.3 min.
14.8 min.
1 GB
294
586
659
1031
1640
7996
18.7 min.
29.6 min.
2 GB
586
1163
1305
2063
3199
15995
36.8 min.
59.2 min.
SD
Memory
Card
512 MB
142
283
319
499
793
3868
9 min.
14.3 min.
1 GB
285
568
638
999
1589
7746
18.1 min.
28.7 min.
2 GB
568
1127
1265
2000
3100
15504
35.6 min.
57.4 min.
SDHC
Memory
Card
xD-Picture Card
7
16 MB
4 GB
1124
2229
2502
3955
6131
30655
70.5 min.*
113.5 min.*
8 GB
2252
4463
5010
7919
12275
61375
141.1 min.* 227.3 min.*
* A movie recording will stop automatically when a movie file becomes approx. 2GB. If you want to continue recording another
164
movie, press the shutter button again. The available recording time is displayed based on approx. 2GB.
FinePix S5800 / FinePix S800
Z Standard number of available frames/recording time per xD-Picture Card, SD Memory Card and internal memory
The number of available frames and recording time is approximate. Actual number of frames and recording time varies
depending on the types of Memory Card or shooting condition. Also, the number of frames and recording time displayed in the
LCD monitor may not decrease regularly.
Quality setting
Number of recorded
pixels
Image data size
iN
3264 × 2448
3.9MB
%
4
2
3264 × 2176 2304 × 1728 1600 × 1200
2.0MB
1.8MB
980 KB
630 KB
`
%
(30 fps)
$
(30 fps)
640 × 480
640 × 480
320 × 240
130 KB
–
–
6
13
15
27
43
211
29 sec.
46 sec.
4
8
9
16
25
124
17 sec.
27 sec.
32 MB
8
16
18
32
51
249
34 sec.
55 sec.
64 MB
16
32
36
64
102
499
70 sec.
1.8 min.
128 MB
32
64
72
128
204
999
2.3 min.
3.7 min.
256 MB
65
130
145
257
410
1999
4.7 min.
7.4 min.
512 MB
130
259
290
515
819
3995
9.3 min.
14.8 min.
1 GB
261
520
581
1031
1640
7996
18.7 min.
29.6 min.
2 GB
520
1031
1163
2063
3199
15995
36.8 min.
59.2 min.
SD
Memory
Card
512 MB
126
251
281
499
793
3868
9 min.
14.3 min.
1 GB
252
503
563
999
1589
7746
18.1 min.
28.7 min.
2 GB
504
1000
1127
2000
3100
15504
35.6 min.
57.4 min.
SDHC
Memory
Card
Internal memory
(approx. 26 MB)
iF
4 GB
996
1977
2229
3955
6131
30655
70.5 min.*
113.5 min.*
8 GB
1995
3959
4463
7919
12275
61375
141.1 min.* 227.3 min.*
16 MB
xD-Picture Card
* A movie recording will stop automatically when a movie file becomes approx. 2GB. If you want to continue recording another
movie, press the shutter button again. The available recording time is displayed based on approx. 2GB.
165
Specifications
If you shoot using the xD-Picture Cards with model numbers containing “M” such as DPC-M1GB, movie recording time may be
reduced if you repeatedly record and erase (frame erase) image files. In such a case, erase all frames or format the xD-Picture Card
before use. Back up important frames (files) onto your PC or another media.
• These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this Owner’s Manual.
• The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright
points and anomalous colors (particularly around text) may appear on the monitor. These are normal display
characteristics and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.
• The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static electricity,
line noise, etc.).
• Due to the nature of the lens, the edges of images may appear distorted. This is normal.
166
Explanation of Terms
Deactivated batteries
Leaving an Ni-MH battery unused in storage for a long period may cause a rise in the level of substances that inhibit current
flow inside the battery and result in a dormant battery. A battery in this state is referred to as deactivated.
Because current flow is inhibited in a deactivated Ni-MH battery, the battery’s original level of performance cannot be achieved.
EV
A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the film
or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes, a
digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the EV decreases
by 1.
Frame rate (fps)
The frame rate refers to the number of images (frames) that are photographed or played back per second. For example, when
10 frames are continuously photographed in a 1-second interval, the frame rate is expressed as 10 fps.
For reference, TV images are displayed at 30 fps (NTSC).
JPEG
Joint Photographic Experts Group
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss of quality in
the decompressed (restored) image.
Memory effect
If an Ni-MH battery is repeatedly charged without first being fully discharged, its performance may drop below its original level.
This is referred to as the “memory effect”.
Motion JPEG
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file are recorded
in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
Smear
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light source, such as
the sun or reflected sunlight, in the photography screen.
WAVE
A standard format used on Windows systems for saving audio data. WAVE files have the “.WAV” file extension and the data
can be saved in either compressed or uncompressed format. Uncompressed recording is used on this camera.
WAVE files can be played back on a personal computer using the following software:
Windows: MediaPlayer
Macintosh: QuickTime Player
* QuickTime 3.0 or later
Continued Q
167
Explanation of Terms
White Balance
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, devices
such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of the ambient light
around the subject. This adjustment is called matching the white balance.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.
168
FUJIFILM Digital Camera Worldwide Network
If you have technical questions or if you need repair service, ask the following local distributor.
Please present the warranty card and your purchase receipt when you ask for repairs. Refer to the warranty card for conditions of the warranty.
There is a case that repair and Technical support cannot be accepted for some models which your local distributor does not deal with.
These lists are subject to change without notice.
NORTH AMERICA
Canada
U.S.A.
Hawaii
FUJIFILM Canada, Inc.
Technical support
Repair service
FUJIFILM U.S.A., Inc.
Technical support
Repair service
FUJIFILM Hawaii, Inc.
Technical support &
Repair service
CENTRAL & SOUTH AMERICA
Argentina
Imagen e informacion S.A.
Technical support &
Repair service
Bolivia
Reifschneider Bolivia Ltda.
Technical support &
Repair service
Brazil
FUJIFILM do Brasil Ltda.
Technical support &
Repair service
Chile
Reifschneider SA
Technical support &
Repair service
Colombia
Animex de Colombia Ltda.
Technical support &
Repair service
Ecuador
Espacri Cia Ltda
Technical support &
Repair service
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-866-818-FUJI (3854) http://www.fujihelp.ca
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-800-263-5018 FAX 1-905-755-2993 http://www.fujihelp.ca
1100 King George Post Rd., Edison, NJ 08837
TEL 800-800-3854 FAX 732-857-3487 digitalinfo@fujifilm.com
1100 King George Post Rd., Edison, NJ 08837
TEL 732-857-3000 FAX 732-857-3471 njcamerarepair@fujifilm.com
94-468 Akoki Street, Waipahu, HI. 96797
TEL 1-808-677-3854, ext. 209 FAX 1-808-677-1443
kurt_kmett@fujifilmhawaii.com
Fondo de la Legua 936 San Isidro Pcia. de Buenos Aires
TEL +54-11-4836-1000 FAX +54-11-4836-1144
servtec@imageneinformacion.com.ar
Calle H N.° 5 - Equipetrol Norte - Santa Cruz
TEL +591 33 44 1129 FAX +591 33 45 2919 gciagral@bibosi.scz.entelnet.bo
Av. Vereador José Diniz, 3400 - Campo Belo, Sào Paulo/SP
TEL 0800-12-8600 FAX +55 11 5091-4150 camarasdigitais@fujifilm.com.br
Av. El Conquistador del Monte 5024, Huechuraba, Santiago, Chile
TEL 02-4431500 FAX 02-4431596 ceciliacalvo@reifschneider.cl
Calle 44 N.° 13-43 Piso 2 Apartado 18001 - Bogotá
TEL +57 1 338-0299 FAX +57 1 288-2208 animex@etb.net.co
Bolivar 5-69 y Hermano Miguel
TEL 593-72-835526 FAX 593-72-833157
169
FUJIFILM Digital Camera Worldwide Network
Ecuador
Importaciones Espacri Cia. Ltda.
Technical support &
Repair service
Simón Bolivar 5-69 y Hno. Miguel - Cuenca
TEL +593 783 5526 FAX +593 783 3157 portiz@fujifilm.com.ec
Mexico
Fujifilm de Mexico, S.A. de C.V.
Technical support
Repair service
Av. Ejercito Nacional 351, Col. Granada 11520 Mexico, D.F.
TEL (52-55) 5263-5566 / 68 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Paraguay
Errece S.R.L.
Technical support &
Repair service
Peru
Procesos de Color S.A.
Technical support &
Repair service
Pablo Bermudez 111 Apartado 3794 - Esq. Arequipa - Lima 11
TEL +51 14 33 5563 FAX +51 14 33 7177 jalvarado@fujifilm.com.pe
Uruguay
Fotocamara S.R.L.
Technical support &
Repair service
Cuareim 1439, montevideo, Uruguay
TEL +598-2-9002004 FAX +598-2-9008430 fotocam@adinet.com.uy
Uruguay
Kiel S.A.
Technical support &
Repair service
Maldonado 1787 Montevideo- Uruguay
TEL (05982) 419 4542 FAX (05982) 412 0046 kiel@fujifilm.com.uy
Venezuela
C. Hellmund & Cia Sa
Technical support &
Repair service
Av. Ppal Diego Cisneros Caracas Venezuela Edf Oficentro
TEL 0212-2022300 FAX 0212-2399796 hellmund@hellmund.com
Fuji Film Oesterreich
Technical support &
Repair service
Traviatagasse/Pfarrgasse, 1230 Vienna, Austria
TEL 0043 1 6162606/51 or 52 FAX 0043 1 6162606/58
kamera.service@fujifilm.at
Belgium
Belgian Fuji Agency
Technical support &
Repair service
20, Avenue Lavoisier, Wavre, 1300, Belgium
TEL 3210242090 FAX 3210238562 info@fuji.be
Croatia
I&I d.o.o.
Technical support
Repair service
Hondlova 2, Zagreb, Croatia
TEL 38512319060 FAX 2310240 dsaravanja@fujifilm.hr
EUROPE
Austria
Cyprus
170
Av. Presidente Juarez 2007, Col. Tepetlacalco, 54090 Tlalnepantla, Edo. de
Mexico
TEL (52-55) 5263-5500 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Edificio Unitas 15 de Agosto 1035, Asunción
TEL +595 21 444256 FAX +595 21 444651 jmarbulo@fujifilm.com.py
PMS IMAGING LTD
Technical support &
Repair service
Hondlova 2, Zagreb, Croatia
TEL 38512316228 FAX 2310240 info@fujifilm.hr
11, Dighenis Akritas Avenue, P.O.BOX 22315, 1586 Nicosia
TEL 35722746746 FAX 35722438209 mariosashiotis@fujifilm.com.cy
Cyprus
Doros Neophytou
CAMERA REPAIRS
Technical support &
Repair service
28B, Agiou Demetriou, Acropoli, Nicosia
TEL 35722314719 FAX 35722515562 dorosn@logosnet.cy.net
Czech Republic
Fujifilm Cz., s.r.o.
Technical support
U nakladoveho nadrazi 2/1949, 130 00 Praha 3
TEL 00420 234 703 411 FAX 00420 234 703 489 fricman@fujifilm.cz
Czech Republic
AWH servis
Repair service
Milesovska 1, 130 00 Praha 3, Czech republic
TEL 00420 222 721 525 FAX 00420 222 720 122 awh@awh.cz
Denmark
Fujifilm Denmark A/S
Technical support &
Repair service
Stubbeled 2, 2950 Vedbæk Denmark
TEL 0045 45662244 FAX 0045 45662214 fujifilm@fujifilm.dk
Finland
Fuji Finland Oy
Technical support &
Repair service
Martinkyläntie 41, 01720 Vantaa, Finland
TEL +358 9 825951 FAX +358 9 870 3818 fuji@fuji.fi
France
FUJIFILM France
Technical support &
Repair service
2, Avenue Franklin, 78186 Saint-Quentin en Yvelines, France
FAX 33 1 01 30 58 58 65 direction.technique@fujifilm.fr
Germany
FUJIFILM (Europe) GmbH
Technical support &
Repair service
Greece
FUJIFILM HELLAS S.A.
Technical support &
Repair service
Heesenstr. 70, 40549 Düsseldorf
International call TEL +49 211 50890 FAX +49 211 5089668 service@fujifilm.de
National call* TEL 0180 5898980 FAX 0180 5898982
*12 Cent/Min aus dem deutschen Festnetz
1, Ihous & Ag. Anargiron str., 175 64 P.Phaliro, Athens, Greece
TEL 0030 210 9404100 FAX 0030 210 9404397 fujifilm@fujifilm.gr
Hungary
Fujifilm Hungary Ltd.
Technical support
Vaci ut 19. Budapest, 1134, Hungary
TEL 3612389410 FAX 3612389401 fujifilm@fujifilm.hu
Iceland
Icephoto (Ljosmyndavorur)
Technical support &
Repair service
Skipholt 31, 105 Reykjavik, Iceland
TEL 354 568 0450 FAX 354 568 0455 framkollun@fujifilm.is
Italy
FujiFilm Italia S.p.A.
Technical support
Repair service
Via Dell’Unione Europea, 4 - 20097 San Donato Milanese (MI), Italy
TEL 039-02895821 FAX 039-0289582912 info@fujifilm.it
Lithuania
Fujifilm Lithuania
Technical support &
Repair service
Fujifilm On Line - Call center
TEL 039-026695272 info@fujifilm.it
Gerosios Vilties str. 38, LT-03143 Vilnius, Lithuania
TEL 370-5-2130121 FAX 3705-5-2134066 info@fujifilm.lt
171
FUJIFILM Digital Camera Worldwide Network
Malta
Ciancio (1913) Co.Ltd.
Technical support &
Repair service
Fuji Tech Centre, Ciancio House, Cannon Road, Qormi, QRM05
TEL 0356-21-480500 FAX 0356-21-488328 info@fujifilm.com.mt
Netherlands
Fujifilm Nederland BV
Technical support
Repair service
Hoogstraat 39, 3011 PE, Rotterdam, The Netherlands
TEL 010-2812345 FAX 010-2812334 fuji@fujifilm.nl
Norway
Fujifilm Norge AS
Technical support
Repair service
Poland
Fujifilm Polska Distribution Sp. z
o.o.
Technical support
Repair service
Portugal
Fujifilm Portugal, Lda
Technical support
Repair service
Poland, Muszkieterow 15, 02-273 Warszawa
TEL +48-22-886-94-40 FAX +48-22-886-94-42 serwis@fujifilm.pl
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 226194213 finepix@fujifilm.pt
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 225194662 cameras@fujifilm.pt
112, Calea Dorobanti street, 4 flat, 1sector, Bucharest, Romania
TEL 4021-230-09-82 FAX 4021-230-09-82 cts_tirla@hotmail.com
Romania
CTS-Cardinal Top Systems Ltd
Technical support &
Repair service
Russia
ZAO “Fujifilm RU”
Technical support
Bld. 1, 10, Rozanova str., Moscow, 123007, Russia
TEL +7-095-956-9858 FAX +7-095-230-6217 info@fujifilm.ru
Repair service
18, Shelepikhinskaya Naberezhnaya str., Moscow, 123290, Russia
TEL +7-095-797-3434 FAX +7-095-797-3434
Pribylinska 2, 831 04 Bratislava, Slovakia
TEL 00421 2 44 888 077 FAX 00421 2 44 889 300 fujifilm@fujifilm.sk
Slovakia
Spain
172
Hoevenseweg 43, 4877 LA, Etten-Leur, The Netherlands
TEL 010-2812345 FAX 076-7502641 reparatie@fujifilm.nl
Lilleakerveien 10, 0283 Oslo, Norway
TEL 0047-22736000 FAX 0047-22736020 http://www.fujifilm.no/
mailto:post@fujifilm.no
Liaveien 1, 5132 Nyborg, Norway
TEL 0047-55393880 FAX 0047-55195201 http://www.camera.no/
mailto:service@camera.no
Poland Al..Jerozolimskie 178; 02-486 Warszawa
TEL +48-22-517-66-00 FAX +48-22-517-66-02 fujifilm@fujifilm.pl
Fujifilm Slovakia
Technical support
Repair service
Fujifilm España S.A.
Technical support
Repair service
FIS Tatracentrum, Hodzovo nam. 4 - Tatracentrum, 811 06 Bratislava, Slovakia
TEL 00421 2 54 647 347 fis.tatracentrum@stonline.sk
Aragón 180, 08011 Barcelona (España)
TEL 902012535 FAX 934515900 / 933230330 info@fujifilm.es
Aragón 180, 08011 Barcelona (España)
TEL 934511515 FAX 934515900 / 933230330 tallersat@fujifilm.es
Sweden
Fujifilm Sverige AB
Technical support
Repair service
Switzerland /
Lichtenstein
Fujifilm (Switzerland) AG
Technical support &
Repair service
Turkey
Fujifilm Turkiye Sinfo A.S.
Technical support
Repair service
U.K.
Ukraine
MIDDLE EAST
Iran
Israel
FUJIFILM UK Ltd.
Technical support
Repair service
Image Ukraine CJSC
Technical support &
Repair service
Sveavägen 167 104 35 Stockholm
TEL 46 8 506 141 70 FAX 46 8 506 142 09 kamera@fujifilm.se
Sveavägen 167 104 35 Stockholm
TEL 46 8 506 513 54 FAX 46 8 506513 54 kameraverkstaden@fujifilm.se
Niederhaslistrasse 12, 8157 Dietlikon, Switzerland
TEL +41 44 855 5154 FAX +41 44 855 5329 RepairCenter@fujifilm.ch
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5009 csarp@fujifilm.com.tr
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5010 servis@fujifilm.com.tr
St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 424 5383 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 421 8388 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
12, Kontraktova ploshcha, Kyiv 04070, Ukraine
TEL +380-44-4909075 FAX +380-44-4909076 d@fujifilm.ua
Tehran Fuka Co.
Technical support &
Repair service
229,“Fuji” Bldg., Mirdamad Blvd., Tehran 19189, Iran
TEL (+98-21)2254810-19 FAX (+98-21)2221002 fuka@neda.net
Shimone Group Ltd.
Technical support
Repair service
Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 digital@fujifilm.co.il
Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 FAX 972 3 9250699 khaim@shimone.com
Al- Abdali, Amman / Jordan
TEL 009626-4646387 FAX 009626-4647542 gstores@go.com.jo
Jordan
Grand Stores
Technical support &
Repair service
Qatar
Techno Blue
Technical support
Blue Salon Bldg, 3rd Floor, Suhaim bin Hamad st, Al- Saad, Doha
TEL 00974 44 66 175 FAX 00974 44 79 053 prabu@techno-blue.com
Saudi Arabia
Emam Distribution Co. Ltd.
Technical support
P.O. Box 1716, Jeddah 21441, Saudi Arabia
TEL 96626978756 FAX 96626917036 service@fujifilm.com.sa
173
FUJIFILM Digital Camera Worldwide Network
Syria
Al-Shahbandar P.O. Box:31180 Damascus SYRIA
TEL + 963 11 2218049 FAX + 963 11 44673456 f.t.c@Net.SY
Al-cheikh Taha P.O. Box: 6171 Aleppo SYRIA
TEL + 963 21 4641903 FAX + 963 21 4641907 filmtradin@Net.SY
P. O. Box 2144, Saleh Bin Lahej Building, Al Garhoud, Deira, Dubai
TEL + 971-4-2823700 FAX + 971-4-2828382 photography@grandstores.ae
U.A.E.
Grand Stores
Technical support &
Repair service
Yemen
Al-Haidary Trading
Technical support
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503980 FAX 00967-1-503983
Foto Express Egypt
Technical support &
Repair service
426 Pyramids St., Giza, Egypt
TEL (202) 7762062 FAX (202) 7760169 fotoegypt@access.com.eg
Fuji Kenya Ltd
Repair service
P.O.Box 41669-00100, Fuji Plaza, Chiromo Road, Nairobi, Kenya.
TEL (254-20)4446265-8 FAX (254-20)4448515 / 7 info@fujifilm.co.ke
FUJIFILM Australia Pty Ltd
Technical support
Repair service
Locked Bag 5100, Brookvale NSW 2100
TEL 1800 226 355 FAX +61 (2) 9466 2854 digital@fujifilm.com.au
Fiji
Brijlal & Co. Ltd
Technical support &
Repair service
70-72 Cumming Street,Suva,Fiji
TEL (679)3304133 FAX (679)3302777 kapadia@connect.com.fj
New Caledonia
Phocidis SARL
Technical support &
Repair service
58, rue Higginson - B.P.661 - 98845
TEL (00 687) 25-46-35 FAX (00 687) 28-66-70 phocidis@phocidis.nc
New Zealand
Fujifilm NZ Ltd
Technical support &
Repair service
Cnr William Pickering & Bush Road Albany, Auckland
TEL +64-9-4140400 FAX +64-9-4140410 glenn.beaumont@fujifilm.co.nz
Papua New Guinea
Oceania PNG Limited
Technical support
Section 15, Allotment 1, Reke St, Boroko NCD. PNG. Mail: PO Box 2167, Boroko
NCD. PNG. TEL +675 3256411 FAX +675 3250311 oceania@daltron.com.pg
AFRICA
Egypt
Kenya
OCEANIA
Australia
174
Film Trading Company
Technical support
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503977 FAX 00967-1-503983
ASIA
Hong Kong
Fuji Photo Products Co., Ltd.
Technical support &
Repair service
8/F.,TSUEN WAN IND. CENTRE, 220 TEXACO RD., TSUEN WAN, HONG KONG
TEL (852)2406 3287 FAX (852)2408 3130 rsd@chinahkphoto.com.hk
Indonesia
PT Modern Photo Tbk
Technical support &
Repair service
Jl.Matraman Raya 12, Jakarta Timur 13150
TEL +62 021 2801000 FAX +62 021 8581620+62 021 2801012
assd_kmr@modernphoto.co.id
Malaysia
FUJIFILM (Malaysia)
Sdn. Bhd.
Technical support
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 digital@fujifilm.com.my
Philippines
YKL Development & Trdg. Corp.
Technical support
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 technical@fujifilm.com.my
24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 digital@yklcolor.com
24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 tech_services@yklcolor.com
10 New Industrial Road Fujifilm Building Singapore 536201
TEL 65-6380 5557 FAX 65-6281 3594 service@fujifilm.com.sg
Singapore
FUJIFILM (Singapore) Pte Ltd
Technical support &
Repair service
South Korea
Korea Fujifilm Co., Ltd.
Technical support
30-1, Mukjeung-dong, Jung-gu, Seoul, Korea
TEL +82-2-3282-7363 FAX +82-2-2269-7435 photo@fujifilm.co.kr
South Korea
Yonsan AS Center (Fujidigital)
Repair service
#301, 3F, Jeonjaland, 16-9, Hangangro3-ga, Yongsan-gu, Seoul, Korea
TEL +82-2-701-1472 FAX +82-2-718-1331 1bowl@hanmail.net
South Korea
Kangnam AS Center
(Digitalgallery)
Repair service
2F, Hyeongin Tower, 23-2, Bangyi-dong, Songpa-gu, Seoul, Korea
TEL +82-2-2203-1472 FAX +82-2-418-5572 nurijili@hanmail.net
South Korea
Busan AS Center (Digital-Sewon) 241-4, Bujeon-dong, Busanjin-gu, Busan, Korea
TEL +82-51-806-1472 FAX +82-51-817-0083 merahan@yahoo.co.kr
Repair service
No. 38, Min-Chuan E. Rd. Sec. 6, Taipei (114), Taiwan, R.O.C.
Hung Chong Corp.
TEL 886-2-6602-8988 FAX 886-2-2791-8647 dah@mail.hungchong.com.tw
Technical support &
Repair service
Taiwan
Thailand
FUJIFILM (Thailand) Ltd.
Technical support
Repair service
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext. 755 FAX +662-2730239 supaleark@fujifilm.co.th
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext.761,762 FAX +662-2730239 warin@fujifilm.co.th
175
Safety Notes
• Make sure that you use your FinePix S5700 / FinePix
S700 / FinePix S5800 / FinePix S800 camera correctly.
Read these Safety Notes and your Owner’s Manual
carefully before use.
• After reading these Safety Notes, store them in a safe
place.
About the Icons
The icons shown below are used in this document to
indicate the severity of the injury or damage that can
result if the information indicated by the icon is ignored
and the product is used incorrectly as a result.
WARNING
This icon indicates that death
or serious injury can result if
the information is ignored.
CAUTION
This icon indicates that
personal injury or material
damage can result if the
information is ignored.
The icons shown below are used to indicate the nature of
the information which is to be observed.
Triangular icons tell you that this information requires
attention (“important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an
action that must be performed (“Required”).
176
WARNING
If a problem arises, turn the camera off,
remove the batteries, disconnect and
unplug the AC power adapter.
Continued use of the camera when it is
emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can
cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Unplug from
power socket.
Do not allow water or foreign objects to
enter the camera.
If water or foreign objects get inside the
camera, turn the camera off, remove the
batteries and disconnect and unplug the
AC power adapter.
Continued use of the camera can cause a
fire or electric shock.
• Contact your FUJIFILM dealer.
Do not use the camera in the bathroom
or shower.
This can cause a fire or electric shock.
Do not use in the
bathroom or
shower.
Never attempt to change or take apart
the camera. (Never open the casing.)
Do not use the camera when it has been
dropped or the casing is damaged.
This can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not
disassemble.
WARNING
Do not change, heat or unduly twist or
pull the connection cord and do not
place heavy objects on the connection
cord.
These actions could damage the cord and
cause a fire or electric shock.
• If the cord is damaged, contact your
FUJIFILM dealer.
Do not place the camera on an unstable
surface.
This can cause the camera to fall or tip
over and cause injury.
Never attempt to take pictures while in
motion.
Do not use the camera while you are
walking or driving a vehicle.
This can result in you falling down or being
involved in a traffic accident.
Do not touch any metal parts of the
camera during a thunderstorm.
This can cause an electric shock due to
induced current from the lightning
discharge.
Do not use the batteries except as
specified.
Load the batteries with the + and ,
marks.
WARNING
Do not heat, change or take apart the
batteries.
Do not drop or subject the batteries to
impacts.
Do not attempt to recharge lithium or
alkaline batteries.
Do not store the batteries with metallic
products.
Do not use chargers other than the
specified model to charge the batteries.
Any of these actions can cause the
batteries to burst or leak and cause fire or
injury as a result.
Use only the batteries or AC power
adapters specified for use with this
camera.
Do not use voltages other than the
power supply voltage shown.
The use of other power sources can cause
a fire.
If the battery leaks and fluid gets in
contact with your eyes, skin or
clothing. Flush the affected area with
clean water and seek medical attention
or call an emergency number right
away.
Do not use the charger to charge
batteries other than those specified
here.
The charger is designed for Fujifilm HR-AA
Ni-MH batteries. Using the charger to
charge conventional batteries or other
types of rechargeable batteries can cause
the battery to leak fluid, overheat or burst.
177
Safety Notes
WARNING
When discarding or storing batteries,
cover the battery terminals with
insulation tape.
Contact with other metallic objects or
batteries could cause the batteries to ignite
or burst.
Keep Memory Cards out of the reach of
small children.
Because Memory Cards are small, they
can be swallowed by children. Be sure to
store Memory Cards out of the reach of
small children. If a child swallows a
Memory Card, seek medical attention or
call an emergency number.
CAUTION
Do not use this camera in locations
affected by oil fumes, steam, humidity
or dust.
This can cause a fire or electric shock.
Do not leave this camera in places
subject to extremely high
temperatures.
Do not leave the camera in locations such
as a sealed vehicle or in direct sunlight.
This can cause a fire.
Keep out of the reach of small children.
This product could cause injury in the
hands of a child.
Do not place heavy objects on the
camera.
This can cause the heavy object to tip over
or fall and cause injury.
Do not move the camera while the AC
power adapter is still connected.
Do not pull on the connection cord to
disconnect the AC power adapter.
This can damage the power cord or cables
and cause a fire or electric shock.
Do not use the AC power adapter when
the plug is damaged or the plug socket
connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the
AC power adapter in a cloth or blanket.
This can cause heat to build up and distort
the casing or cause a fire.
178
CAUTION
When you are cleaning the camera or
you do not plan to use the camera for
an extended period, remove the
batteries and disconnect and unplug
the AC power adapter.
Failure to do so can cause a fire or electric
shock.
When charging ends, unplug the
charger from the power socket.
Leaving the charger plugged into the
power socket can cause a fire.
Using a flash too close to a person’s
eyes may temporarily affect the
eyesight.
Take particular care when photographing
infants and young children.
When a Memory Card is removed, the
card could come out of the slot too
quickly. Use your finger to hold it and
gently release the card.
Request regular internal testing and
cleaning for your camera.
Build-up of dust in your camera can cause
a fire or electric shock.
• Contact your FUJIFILM dealer to
request internal cleaning every 2 years.
• Please note this is not a free of charge
service.
179
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital/
Printed in Indonesia
Y/Y-709107
1AG6P1P3529--