Owner`s manual | FujiFilm A805 Digital Camera User Manual

Getting Ready
Using the Camera
Advanced Features
• Photography
• Playback
• Movie
Settings
OWNER’S MANUAL
This manual will show you how to use
your FUJIFILM DIGITAL CAMERA
FinePix A610/FinePix A805 correctly.
Please follow the instructions carefully.
Camera Connection
Software
Installation
Appendices
Troubleshooting
BL00638-200(1)
Warning
To prevent fire or shock hazard, do not expose the unit to rain
or moisture.
For customers in Canada
For customers in the U.S.A.
This Class B digital apparatus complies with Canadian ICES-003.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for
help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void the user’s authority to operate
the equipment.
Notes on the Grant:
To comply with Part 15 of the FCC Rules, this product must be used
with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC
supply cord.
2
CAUTION
Please read the Safety Notes (➝p.151) and make
sure you understand them before using the camera.
IMPORTANT
NOTICE
BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM
Corporation, PLEASE READ THIS END USER LICENSE AGREEMENT
CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,
SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.
BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE
BOUND BY THIS AGREEMENT.
End User License Agreement
This End User License Agreement (“Agreement”) is an agreement between
FUJIFILM Corporation (“FUJIFILM”) and you, which sets forth the terms
and conditions of the license granted for you to use the software provided
by FUJIFILM.
The CD-ROM contains third party software. In case a separate agreement
is provided by a third party supplier for its software, the provisions of such
separate agreement shall apply to the use of such third party software,
prevailing over those of this Agreement.
1. Definitions.
(a) “Media” means the CD-ROM titled “Software for FinePix KA”- which
is provided to you together with this Agreement.
(b) “Software” means the software which is recorded on Media.
(c) “Documentation” means the operation manuals of Software and
other related written materials which are provided to you together
with Media.
(d) “Product” means Media (including Software) and Documentation
collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a) to install one copy of Software onto one computer in binary machine
executable form;
(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any
part of Software, Media or Documentation to any third party without
FUJIFILM’s prior written consent. You also shall not sublicense,
assign or otherwise transfer all or any part of the rights granted to
you by FUJIFILM under this Agreement without FUJIFILM’s prior
written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not
copy or reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation.
You also shall not alter or remove copyright and other proprietary
notices that appear on or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer,
decompile, or disassemble Software.
Be sure to read this page before using the software.
4. Ownership.
All copyrights and other proprietary rights to Software and Documentation are
owned and retained by FUJIFILM or the third party suppliers as indicated on
or in Software or Documentation. Nothing contained herein shall be
construed, expressly or implicitly, as transferring or granting any right, license,
or title to you other than those explicitly granted under this Agreement.
5. Limited Warranty.
FUJIFILM warrants to you that Media is free from any defect in material
and workmanship under normal use for ninety (90) days from the date
of your receipt of Media. Should Media not meet the foregoing warranty,
FUJIFILM shall replace such defective Media with other Media bearing
no defect. FUJIFILM’s entire liability and your sole and exclusive
remedy with regard to any defect in Media shall be expressly limited to
such FUJIFILM’s replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES
PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,
EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,
INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY
COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER
PROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,
OR FITNESS FOR ANY PARTICULAR PURPOSE.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY
GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,
INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE
USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
8. No export.
You acknowledge that neither Software nor any part thereof, will be
transferred, or exported to any country or used in any manner in violation
of any export control laws and regulations to which Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof, FUJIFILM
may immediately terminate this Agreement without any notice.
10. Term.
This Agreement is effective until the date when you cease to use
Software, unless earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your own
responsibility and expense, delete or destroy immediately all Software
(including its copies), Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance with
laws of Japan.
3
EC Declaration of Conformity
We
Name:
Address:
FUJIFILM Europe GmbH
Heesenstrasse 31
40549 Dusseldorf, Germany
declare that the product
Product Name:
FUJIFILM DIGITAL CAMERA FinePix A610/FinePix A805
Manufacturer’s Name:
FUJIFILM Corporation
Manufacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU,
TOKYO 107-0052, JAPAN
conforms to the following Standards:
Safety: EN60065
EMC: EN55022: 1998 Classe B
EN55024: 1998
EN61000-3-2: 1995 + A1: 1998 + A2: 1998
following the provision of the EMC Directive (89/336/EEC, 92/31/EEC) and Low Voltage Directive (2006/95/EC).
Dusseldorf, Germany
June 1, 2007
Place
Date
Signature/Managing Director
This product comes with batteries. When these are empty, you shouldn’t throw them
away but deliver them as domestic chemical refuse.
4
Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this
product shall not be treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to
the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local
requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you have purchased the product.
In Countries outside the EU:
If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.
5
Contents
Warning................................................................. 2
IMPORTANT ......................................................... 3
EC Declaration of Conformity................................ 4
Disposal of Electric and Electronic Equipment
in Private Households...................................... 5
Contents................................................................ 6
Preface.................................................................. 8
About this Manual ............................................... 10
Accessories Included (FinePix A805) ................. 12
Accessories Included (FinePix A610) ................. 13
Camera Parts and Features (FinePix A610) ....... 14
Camera Parts and Features (FinePix A805) ....... 15
Example of LCD Monitor Text Display ................ 16
Getting Ready
Charging the Batteries (FinePix A805)................ 17
Loading the Batteries .......................................... 19
Loading the Memory Card................................... 22
Turning On and Off ............................................. 25
Setting the language, date, and time .......... 26
Correcting the Date and Time ............................. 28
Selecting the Language ...................................... 29
Using the Camera
Taking Pictures (AUTO Mode) ............................ 30
Taking pictures with the focus and
exposure locked ....................................... 34
Adjusting the shot composition ................... 36
Viewing the Images............................................. 37
Erasing the Images/Movies ............................ 41
Using the erase button ( /n) .................... 41
6
Erasing the images using
Playback menu ........................................ 41
Advanced Features — Photography
Using the Photography Functions
— Procedure of Setting.................................
Setting the Shooting Mode (FinePix A610) ........
Setting the Shooting Mode (FinePix A805) ........
Shooting Mode ...................................................
e Macro (Close-up) ...........................................
d Setting the Flash (Intelligent Flash) ................
* Self-Timer ......................................................
j Increasing Monitor Brightness ......................
Using SHOOTING MENU ..................................
Setting the SHOOTING MENU ..................
SHOOTING MENU.............................................
Changing the sensitivity setting ( ISO) ...
Changing the quality setting
( QUALITY) ..........................................
Adjusting exposure compensation
( EXP. COMPENSATION) ...................
Adjusting color balance
( WHITE BALANCE) ............................
44
46
47
49
54
55
57
59
60
60
63
63
64
65
66
Advanced Features — Playback
Using PLAYBACK MENU...................................
Setting the PLAYBACK MENU ..................
Setting automatic playback
( SLIDE SHOW)...................................
DPOF set frame
( PRINT ORDER (DPOF)) ...................
67
67
68
68
Protecting the images ( PROTECT)........ 72
Copying the images ( COPY) .................. 73
Rotating the images
( IMAGE ROTATE) ............................... 76
Trimming the images
( TRIMMING) (FinePix A805 only) ....... 77
Advanced Features — Movie
r Recording Movies .......................................... 79
Set the camera to r Movie mode
(FinePix A610) ......................................... 79
Set the camera to r Movie mode
(FinePix A805) ......................................... 79
Record movies ............................................ 80
w Playing Back Movies ..................................... 82
Settings
SET-UP.......................................................... 84
Using the SET-UP menu............................. 84
SET-UP menu option .................................. 85
Camera Connection
Connecting to a TV (FinePix A610)..................... 93
Connecting to a TV (FinePix A805)..................... 94
Connecting Camera Directly to Printer
— PictBridge Function ................................... 95
Software Installation
Installation on a Windows PC............................. 99
Installation on a Mac OS X............................... 102
Connecting to a PC .......................................... 105
Using FinePixViewer ................................ 109
Appendices
System Expansion Option ................................ 112
Accessories Guide ........................................... 113
Using Your Camera Correctly .......................... 115
Power Supply and Batteries ............................. 116
Discharging rechargeable batteries ......... 119
Notes on the xD-Picture Card™, the SD Memory
Card and the Internal Memory .................... 122
Warning Displays ............................................. 123
Troubleshooting
Troubleshooting................................................ 127
Specifications ................................................. 133
Explanation of Terms ..................................... 142
FUJIFILM Digital Camera Worldwide
Network..................................................... 143
Safety Notes................................................... 151
Usable Memory Cards
You can use the xD-Picture Card and the SD Memory Card
with the FinePix A610 and FinePix A805. In this Owner’s
Manual, these cards are expressed as “Memory Card”.
7
Preface
Z Test Shots Prior to Photography
For important photographs (such as weddings and
overseas trips), always take a test shot and view the
image to make sure that the camera is working normally.
• FUJIFILM Corporation cannot accept liability for any
incidental losses (such as the costs of photography or
the loss of income from photography) incurred as a
result of faults with this product.
Z Notes on Copyright
Images recorded using your digital camera system cannot
be used in ways that infringe copyright laws without the
consent of the owner, unless intended only for personal
use. Note that some restrictions apply to the
photographing of stage performances, entertainments
and exhibits, even when intended purely for personal use.
Users are also asked to note that the transfer of Memory
Card containing images or data protected under copyright
laws is only permissible within the restrictions imposed by
those copyright laws.
Z Handling Your Digital Camera
This camera contains precision electronic components.
To ensure that images are recorded correctly, do not
subject the camera to impact or shock while an image is
being recorded.
8
Z Liquid Crystal
If the LCD monitor is damaged, take particular care with
the liquid crystal in the monitor. If any of the following
situations arise, take the urgent action indicated.
• If liquid crystal comes in contact with your skin
Wipe the area with a cloth and then wash thoroughly
with soap and running water.
• If liquid crystal gets into your eye
Flush the affected eye with clean water for at least 15
minutes and then seek medical assistance.
• If liquid crystal is swallowed
Flush your mouth thoroughly with water. Drink large
quantities of water and induce vomiting. Then seek
medical assistance.
Z Trademark Information
•
and xD-Picture Card™ are trademarks of
FUJIFILM Corporation.
• IBM PC/AT is a registered trademark of International
Business Machines Corp. of the U.S.A.
• Macintosh, Power Macintosh, iMac, PowerBook, iBook
and Mac OS are trademarks of Apple Inc., registered in
the U.S. and other countries.
• Microsoft, Windows, the Windows logo, Windows Vista
and the Windows Vista logo are trademarks or
registered trademarks of Microsoft Corporation in the
United States and/or other countries.
Windows is an abbreviated term referring to the
Microsoft® Windows® Operating System.
* The “Designed for Microsoft® Windows® XP” logo refers
to the camera and the driver only.
• IrSimple™ Trademark is owned by the Infrared Data
Association®.
• IrSS™ Trademark or IrSimpleShot™ Trademark is
owned by the Infrared Data Association®.
• SD logo is a trademark.
• Other company or product names are trademarks or
registered trademarks of the respective companies.
Z Notes on Electrical Interference
If the camera is to be used in hospitals or aircrafts, please
note that this camera may cause interference to other
equipment in the hospital or aircraft. For details, please
check with the applicable regulations.
Z Explanation of Color Television System
NTSC:
PAL:
National Television System Committee, color
television telecasting specifications adopted
mainly in the U.S.A., Canada and Japan.
Phase Alternation by Line, a color television
system adopted mainly by European countries
and China.
Z Exif Print (Exif ver. 2.2)
Exif Print Format is a newly revised digital camera file
format that contains a variety of shooting information for
optimal printing.
* See “Using Your Camera Correctly” (➝p.115) for more
information.
9
About this Manual
Icons indicate the modes that are available.
e Macro (Close-up)
Use this mode to take close-up shots.
Available Photography modes: s, AUTO,
, ,
( p.49, 51, 52, 53)
CAUTION
CAUTION
,
,
Press e (p) to select Macro mode.
Press e (p) again to cancel Macro mode.
,
,
and
are not available on the FinePix A610.
CHECK
• Focal range
Wide angle:
Approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.)
Telephoto:
Approx. 35 cm to 80 cm (1.1 ft. to 2.6 ft.)
• Effective flash range
Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)
MEMO
AUTO
4
e appears on the LCD
monitor indicating that you
can take close-up shots.
• When setting
or
mode, the camera sets to
e Macro mode automatically.
• Use a tripod to prevent camera shake in Macro mode.
• Any of the following cancels Macro mode:
- Changing the Shooting mode setting
- Turning the camera off
This mark denotes issues that may affect the
camera’s operation.
CHECK
This mark denotes points to notice in the
camera’s operation.
MEMO
This mark denotes additional topics that
complement the basic operating procedures.
Z Usable Memory Cards
You can use the xD-Picture Card and the SD Memory Card with the FinePix A610 and FinePix A805. In this Owner’s Manual,
these cards are expressed as “Memory Card”.
Z About illustration
Illustrations in the Owner’s manual show the FinePix A805 as an example (FinePix A610 operate similarly).
Up, down, left, and right are indicated by black triangles in the Owner’s Manual. Up or down is shown as n or o, and left or
right is shown as p or q.
When pressing DISP/BACK:
When pressing q:
10
Z About each model’s functions
This Owner’s Manual shows the description of 2 models: FinePix A610 and FinePix A805. Some functions are available only
on one model. The main differences among the 2 models are shown in the table below.
Check the table to confirm which functions your camera has.
Mode dial (➝p.15)
Shooting Mode (
51)
, b,
,
) (➝p.49,
Number of recorded pixels (➝p.64)
FinePix A610
FinePix A805
Not available
Available
Not available
Available
5F/5N/%/
3/2/`
iF/iN/%/
4/2/`
Trimming (➝p.77)
Not available
Available
Sound during movie shooting (➝p.81)
Not available
Available
The description of functions available only on certain models has a title as below.
Indicating the model has this function.
PLAYBACK MENU
Trimming the images
( TRIMMING)
(except FinePix A610)
Use this mode to trim the required part of the
photographed image.
1
Setting the menu ( p.66)
2
Specify trimming part of image.
] wide zoom
(Zoom out)
[ tele zoom
(Zoom in)
TRIMMING
TRIMMING
Select the menu.
A Press w to set the camera to Playback
mode ( p.34).
YES
CANCEL
YES
CANCEL
Zoom bar
B Press p or q to select the trimming
frame (file).
A Set the zoom switch to [
or ] to zoom in or out of
an image.
11
Accessories Included (FinePix A805)
Make sure that all the below accessories are included.
Note that accessories may vary depending on model.
• CD-ROM (1)
Software for FinePix KA
• AA-size Ni-MH Rechargeable Batteries (2)
• Battery Charger BC-NH02 (1)
• Fitted Soft Case
• Strap (1)
• Owner’s Manual (this manual) (1)
• A/V cable (1)
• USB cable (mini-B) (1)
Attaching the strap
Attach the strap as shown in 1 and 2.
When attaching the strap, move the fastener to adjust the
length and slightly away from the end of the strap, as
shown in figure 1.
1
12
2
Accessories Included (FinePix A610)
Make sure that all the below accessories are included.
Note that accessories may vary depending on model.
• CD-ROM (1)
Software for FinePix KA
• AA-size Alkaline Batteries (LR6) (2)
• Strap (1)
• Owner’s Manual (this manual) (1)
Attaching the strap
• Video cable (1)
• USB cable (mini-B) (1)
Attach the strap as shown in 1 and 2.
When attaching the strap, move the fastener to adjust the
length and slightly away from the end of the strap, as
shown in figure 1.
1
2
13
Camera Parts and Features (FinePix A610)
• Refer to the pages in parentheses for information on using the camera parts or features.
A
B
D
E
C
F
G
H
J
I
K
O
L
P
M
Q
N
R
V
W
14
S
T
U
A Shutter button
B Zoom switch (p.31, 38)
C Lens (Lens cover)
D POWER button
E Flash (p.55)
F ; USB socket (mini-B)
G VIDEO OUT (Video output) socket
(p.93)
H DC IN 3V (power input) socket (p.93)
I Self-timer lamp (p.58)
J Indicator lamp (p.33)
K LCD monitor
L MENU/OK button
M p/e Macro button (p.54)
N Tripod mount
O DISP (Display)/BACK button (p.36, 37)
P w (Playback) button
Q Strap mount
R n/j Low light view button (p.59)/
Erase button (p.41)
S q/d Flash button (p.55)
T o/* Self-timer button (p.57)
U Battery cover (p.19)
V Memory Card slot (p.22)
W Battery compartment (p.20)
Camera Parts and Features (FinePix A805)
• Refer to the pages in parentheses for information on using the camera parts or features.
A
B
E
C
F
D
G
H
I
K
J
L
Q
R
M
S
N
T
O
U
P
Y
Z
V
A Shutter button
B Zoom switch (p.31, 38)
C Microphone
D Lens (Lens cover)
E POWER button
F Flash (p.55)
G ; USB socket (mini-B)
H A/V OUT (Audio/Visual output) socket
(p.94)
I DC IN 3V (power input) socket (p.94)
J Self-timer lamp (p.58)
K Indicator lamp (p.33)
L LCD monitor
M MENU/OK button
N p/e Macro button (p.54)
O Speaker
P Tripod mount
Q Mode dial
R DISP (Display)/BACK button (p.36, 37)
S w (Playback) button
T Strap mount
U n/j Low light view button (p.59)/
Erase button (p.41)
V q/d Flash button (p.55)
W o/* Self-timer button (p.57)
X Battery cover (p.19)
Y Memory Card slot (p.22)
Z Battery compartment (p.20)
W
X
15
Example of LCD Monitor Text Display
*FinePix A805
Z Photography mode
A ( Self-timer (p.57)
B e Macro (close-up) (p.54)
C C Flash (p.55)
D s Photography mode (p.46,
47)
E
Battery level indicator
(p.21)
F AF frame (p.32)
G Date/Time (p.26)
H 9 White balance (p.66)
I iN Quality mode (p.64)
J Number of available frames
(p.138-139)
K ISO 100 Sensitivity (p.63)
L { AF warning (p.123)
M | Camera shake warning
(p.123)
N
Increasing monitor
brightness (p.59)
O Y Internal memory (p.24)
P S Exposure compensation
(p.65)
Z Playback mode
A
D
B
E
A w Playback mode (p.37)
B u DPOF (p.68)
C F Protection (p.72)
D Frame number (p.87)
E Present (p.37)
C
FinePix A610/FinePix A805 has internal memory that can store images without Memory Card. Y appears on the LCD monitor when
the internal memory is active.
16
Charging the Batteries (FinePix A805)
Z Batteries that can be charged
AA-size Ni-MH rechargeable batteries (included)
CAUTION
1
Plug the Ni-MH batteries into negative “,”
poles of the Battery Charger BC-NH02
(included).
Fit the batteries to positive “+” poles of the battery
charger. Check that the Ni-MH batteries are loaded into
the Battery Charger BC-NH02 securely.
Always use the Battery Charger BC-NH02 bundled with
the camera to charge Ni-MH batteries. Attempting to
charge batteries other than those specified for use with
the charger (such as manganese, alkaline or lithium
batteries) can cause the batteries to burst or leak. This
could result in a fire or injury and consequent damage to
the surroundings.
Getting Ready
Charge the AA-size Ni-MH rechargeable batteries (2)
(included).
A
B
CAUTION
• The Ni-MH batteries are not fully charged when
purchased and must be fully charged before being
used.
• When first used after purchasing or when left unused for
a long period, charge and discharge the batteries using
the camera’s “Discharging rechargeable batteries”
function and then recharge them (➝p.119).
• If the terminals of batteries are soiled, it may not be
possible to charge them. Clean the battery terminals
and battery charger terminals with a clean and dry cloth.
Continued Q
17
Charging the Batteries (FinePix A805)
2
Plug the battery charger into a power outlet.
Charging ends after about 5 hours and the charging lamp
turns off. Unplug the battery charger from the power outlet
when it is not in use.
Z How to replace the batteries
Take out the Ni-MH batteries from the positive “+” poles
first.
18
CAUTION
• The shape of the plug and socket-outlet depends on the
country of use.
• If Ni-MH batteries are charged repeatedly before they
are fully discharged, the battery level warning will
appear while there is still ample charge remaining in the
batteries.
Loading the Batteries
1
Open the battery cover.
Getting Ready
Batteries are required to operate the digital camera. At
first, load the batteries in the camera.
Z Compatible batteries
AA-size alkaline batteries (2)
Alkaline batteries are useful when the rechargeable
batteries have run out while you are traveling and a few
more shots are needed.
CHECK
AA-size Ni-MH rechargeable batteries (2)
Check that the camera is turned off before opening the
battery cover.
CAUTION
CAUTION
• Never use the following types of
batteries, as they could cause
Outer casing
serious problems such as battery
fluid leakage or overheating:
1.Batteries with split or peeling
outer casings
2.Combinations of different types
of batteries or new and used batteries together
• Do not use manganese, Ni-Cd or lithium batteries.
• Use the same brand and grade AA-size alkaline
batteries as those supplied with the camera.
• The shooting time provided by alkaline batteries varies
depending on the types and brands. In some cases, the
camera may stop taking pictures or may suddenly turn
off without retracting the lens. This is not a camera fault.
• Do not open the battery cover while the camera is on.
This could damage the Memory Card or ruin the image
files on the Memory Card.
• Do not apply force to the battery cover.
Continued Q
19
Loading the Batteries
2
Load the batteries correctly as indicated by
the polarity icons.
CAUTION
Match the polarity icons (+ and ,) of the batteries to
those on the inside of the battery cover.
3
20
Close the battery cover.
Checking the battery charge
A There is ample battery charge. (Not displayed)
B There is insufficient charge left in the batteries. The
batteries will soon run out. Have a new set of batteries
ready. (Lit red)
C The batteries are depleted. The display will shortly go
blank and the camera will stop working. Replace or
recharge the batteries. (Blinking red)
• Soil, such as fingermarks on the poles of the batteries,
can shorten time for which the batteries can be used.
• The time for which AA-size alkaline batteries (referred
to hereafter simply as alkaline batteries) can be used
varies depending on the brand. Some brands of alkaline
batteries may stop providing power more quickly than
those supplied with the camera. Note also that due to
their nature, the time for which alkaline batteries can be
used decreases in cold conditions (0°C to +10°C/+32°F
to +50°F). For this reason, it is better to use AA-size NiMH batteries.
• Due to the nature of the battery, the battery level
indicator (
, or V) may appear early when the
camera is used in cold locations. Try warming the
battery in your pocket or a similar location before use.
• Depending on the battery type and the level of charge
in the batteries, the camera may run out of power
without first displaying a battery level warning. This is
particularly likely to happen when batteries that have
run out of charge once are re-used.
• Depending on the camera mode, the transition from
to V may occur more quickly.
• See p.116-117 for information on the batteries.
• When first purchased or if left unused for a long period,
the amount of time which AA-size Ni-MH batteries can
be used may be short. See p.117 for more information.
• Battery power consumption varies greatly depending
on use. When you change to Playback mode from
Photography mode,
may not occur, however,
V may suddenly blink red and the camera may stop
operation.
Getting Ready
Turn the camera on and check the battery level indicator
on the LCD monitor.
CAUTION
21
Loading the Memory Card
Although you can store pictures in the camera’s internal
memory, you can store many more images on the
Memory Card (sold separately). You can use the xDPicture Card and the SD Memory Card with the FinePix
A610 and FinePix A805. In this Owner’s Manual, these
cards are expressed as “Memory Card”.
2
Insert a Memory Card.
(xD-Picture Card)
Gold marking
SD Memory Cards
Use of the SD Memory Cards listed below is
recommended. They are operation-checked at FUJIFILM
Corporation.
Maker: SanDisk
Model: Extremew-1GB/Ultrau-512MB, 1GB, 2GB
MEMO
• Compatible Memory Cards will be updated in our
website:
http://www.fujifilm.com/products/digital/
• Depending on the SD Memory Card, recording of
movies may be interrupted.
Use of above mentioned SD Memory Cards are
recommended.
• The camera is not compatible with multimedia cards.
1
Gold contact area
Align the gold marking with the gold contact area,
then insert an xD-Picture Card completely.
(SD Memory Card)
Gold marking
Open the battery cover.
Gold contact area
Align the gold marking with the gold contact area,
then insert an SD Memory Card completely.
22
CAUTION
3
Close the battery cover.
Getting Ready
Be sure to unlock the protection of the SD Memory Card
before inserting it. If it is locked, recording/deleting
images, as well as formatting are not available. To unlock
the protection, slide the switch back, and the SD Memory
Card will work normally.
Protection
switch
How to replace the Memory Card
CAUTION
• A new SD Memory Card or a card previously used on a
PC or any device other than the camera should be
formatted (➝p.90) on the camera before use.
• Do not use a miniSD adaptor or a microSD adaptor
which have exposed contact areas on the back. Use of
these adaptors may cause a malfunction or damage
due to the improper contacts.
Push the Memory Card into the slot and then slowly remove
your finger. The lock is released and the Memory Card is
pushed out.
Continued Q
23
Loading the Memory Card
CAUTION
• When storing Memory Cards, make sure that they are
kept out of the reach of children. A Memory Card could
be swallowed and cause suffocation. If a child swallows
a Memory Card, seek medical attention or call
emergency number right away.
• If the Memory Card is oriented incorrectly, it will not go
all the way into the slot. Do not apply force when
inserting a Memory Card.
• Note that the Memory Card may spring out if you
release your finger quickly from the card immediately
after the lock is released.
• Operation of this camera is only guaranteed when it is
used with FUJIFILM xD-Picture Card and operationchecked SD Memory Card (➝p.22).
• See p.122 for information on the xD-Picture Card, SD
Memory Card and the internal memory.
MEMO
• The size of an image file varies depending on the
subject. For this reason, the number recorded may not
represent the actual number of frames.
• See p.138-139 for information on the standard number
of available frames.
24
Z About internal memory
AUTO
N 124
FinePix A610/FinePix A805
has internal memory that
can store images without
Memory Card. Y appears
on the LCD monitor when
internal memory is active.
When a Memory Card (sold separately) is inserted
[Record images]: Record images to a Memory Card.
[Playback images]: Playback images in a Memory Card.
When a Memory Card (sold separately) is not inserted
[Record images]: Record images to internal memory.
[Playback images]: Playback images in internal memory.
Z About images in the internal memory
Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
DVD-R, CD-R, CD-RW, hard disk, etc.).
It is possible to transfer saved images on the internal
memory to a Memory Card (➝p.73).
Turning On and Off
Press POWER down fully to turn the camera on.
Press POWER again to turn the camera off.
MEMO
Changes between Photography mode and
Playback mode
Press w during shooting to change to Playback mode.
Press the shutter button down halfway to return to
Photography mode.
Turning the camera on in
Playback mode
Press w for about 1 second to turn the camera on in
Playback mode.
Press w during playback to turn the camera off.
Getting Ready
Turning the camera on in
Photography mode
MEMO
To change to Photography mode, press the shutter button
down halfway.
CAUTION
• The lens moves and the lens cover opens when turning
the camera on in Photography mode. Take care not to
obstruct the lens.
• Take care not to get fingerprints on the camera lens as
this will result in impaired image quality in your shots.
25
Turning On and Off
Setting the language, date, and
time
2
Set the date and time.
DATE / TIME NOT SET
When using the camera for the first time after purchasing,
the language, date, and time are cleared. Set the
language, date, and time.
1
YY.MM.DD
screen appears when turning
the camera on.
SET
1. 1
12:00
AM
NO
A Press p or q to select Year, Month,
Day, Hour, or Minute.
START MENU
/ LANG.
B Press n or o to correct the setting.
SET
NO
MEMO
A Press n, o, p, or q to select the
language.
B Press MENU/OK to confirm the setting.
26
• Holding down n or o changes the numbers
continuously.
• When the time displayed passes “12”, the AM/PM
setting changes.
MEMO
Change the date format.
DATE / TIME NOT SET
DD . MM . YY
MM / DD / YY
8 / 26 / 2007
YY . MM . DD
SET
10:00
AM
NO
A Press p or q to select the date format.
START MENU screen also appears when the batteries
have been removed and the camera has been left for a
long period. Once the AC power adapter has been
connected or the batteries have been installed for 2 hours
or more, the camera settings will be retained for roughly 6
hours even if both sources of power are removed.
Getting Ready
3
Auto power off function
When the Auto power off function is active, if the camera
is left unused for 2 or 5 minutes, this function turns the
camera off (➝p.91). To turn the camera back on, press
POWER. To play back images, hold down w for about
1 second.
B Press n or o to set the format.
C Always press MENU/OK after the settings
are completed.
Date format
ex. August 26, 2007
YY.MM.DD: 2007.8.26
MM/DD/YY: 8/26/2007
DD.MM.YY: 26.8.2007
27
Correcting the Date and Time
1
2
Open the SET-UP menu.
SET - UP
SHOOTING MENU
ISO
QUALITY
Display the DATE/TIME screen.
AUTO
DATE / TIME
BEEP VOLUME
SHUTTER VOLUME
PLAYBACK VOLUME
LCD BRIGHTNESS
N
SET-UP
* FinePix A805
* FinePix A805
A Press MENU/OK to open the menu.
A Press p or q to select
B Press n or o to select
B Press o to move to menu item.
C Press q.
SET-UP.
C Press n or o to select
.
DATE/TIME.
D Press q.
See “2 Set the date and time. ” (➝p.26).
28
Selecting the Language
2
Open the SET-UP menu.
SHOOTING MENU
ISO
QUALITY
Display the
screen.
Getting Ready
1
SET - UP
AUTO
N
FORMAT
/ LANG.
AUTO POWER OFF
TIME DIFFERENCE
VIDEO SYSTEM
SET-UP
ENGLISH
2 MIN
NTSC
* FinePix A805
A Press MENU/OK to open the menu.
B Press n or o to select
A Press p or q to select
on the FinePix A610).
(Select
SET-UP.
B Press o to move to menu item.
C Press q.
C Press n or o to select
.
D Press q.
See “1
screen appears
when turning the camera on. ” (➝p.26).
29
Taking Pictures (AUTO Mode)
This section describes the basic operations.
Holding the camera correctly
1
Turn the camera on.
A Press POWER down fully to turn the camera on.
Brace your elbows
against your sides and
hold the camera with both
hands.
Do not cover the lens or
flash with your fingers.
B Set the Mode dial to q (FinePix A805 only).
CAUTION
CAUTION
Step B is only for FinePix A805. Since there is no mode
dial on FinePix A610, ignore step B when using that
model.
30
• Moving the camera while shooting gives a blurred
picture (camera shake). Hold the camera steadily with
both hands.
• If the lens or flash is obscured by your fingers or the
strap, subjects may be out of focus or the brightness
(exposure) of your shot may be incorrect.
• Check that the lens is clean. If it is dirty (getting
fingerprints on the lens etc.), clean the lens as informed
on p.115.
2
Check the composition on the LCD monitor.
To adjust zoom scale using the Zoom switch:
Zoom bar
[ tele zoom
(Zoom in)
Using the Camera
] wide zoom
(Zoom out)
<FinePix A610>
• Focal range
Approx. 60 cm (2.0 ft.) to infinity
• Optical zoom focal length (35 mm camera
equivalent)
Approx. 39 mm to 117 mm
• Max. zoom scale
3×
<FinePix A805>
• Focal range
Approx. 50 cm (1.6 ft.) to infinity
• Optical zoom focal length (35 mm camera
equivalent)
Approx. 36 mm to 108 mm
• Max. zoom scale
3×
MEMO
• Select e Macro mode to take close-up shots (➝p.54).
• Use digital zoom when you want to shoot the subject
closer (➝p.49, 88).
Continued Q
31
Taking Pictures (AUTO Mode)
3
Focus on the main subject in the AF frame
and press the shutter button down halfway.
4
Press the shutter button fully.
Double
beep
AF frame
Halfway
pressed
AF frame
becomes smaller
and camera
focuses on the
subject.
CHECK
• Focus on the subject
Double beep is heard
Indicator lamp lit green
• Not focus on the subject
No sound
{ indicated
Indicator lamp blinking green
MEMO
The shutter button has a halfway point at which focus and
exposure are automatically optimized before taking the
picture by pressing fully down.
CAUTION
When pressing the shutter button halfway, a lens
operation sound may be heard.
32
Halfway pressed
Click
Fully pressed
CAUTION
When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
CHECK
When using FinePix A610, the camera makes a beep
sound and takes the picture when you press the shutter
button down fully.
MEMO
• When the subject is not in the AF frame, use AF/AE lock
to take the picture (➝p.34).
• When pressing the shutter button down fully in one
motion, the camera takes the picture without the AF
frame changing.
Flash
Using the Camera
When pressing the shutter
button down halfway, b
appears on the LCD monitor
before the flash fires.
Z Indicator lamp display
The indicator lamp lights or blinks when pressing the
shutter button, etc. The indicator lamp shows the camera
status.
Indicator lamp
250
F4.2
Change the flash mode when you want to take pictures without
flash. See p.55 for information on flash.
Display
CAUTION
• The image shown on the LCD monitor before the
picture is taken may differ in brightness, color, etc. from
the image actually recorded. Play back the recorded
image to check it (➝p.37).
• When selecting a slow shutter speed that will cause
camera shake, | appears on the LCD monitor. Use
flash or a tripod.
• See p.123-126 for information on Warning displays.
See “Troubleshooting” (➝p.127-132) for more
information.
Status
Lit green
Locking the focus
Blinking green
Camera shake warning, AF warning,
or AE warning (ready to shoot)
Blinking green and
orange alternately
Recording to Memory Card or internal
memory (ready to shoot)
Lit orange
Recording to Memory Card or internal
memory (not ready)
Blinking orange
Charging flash (flash will not fire)
Blinking red
• Warnings for Memory Card and
internal memory
Card not formatted, incorrect format,
memory full, Memory Card or
internal memory error
• Lens operation error
MEMO
Detailed warning messages appear on the LCD monitor
(➝p.123-126).
33
Taking Pictures (AUTO Mode)
Taking pictures with the focus
and exposure locked
In the above composition, the subjects (two people in this
case) are not in the AF frame. Pressing the shutter button
halfway at this point will result in the subjects being out of
focus.
Using AF/AE lock
1
Move the camera slightly so that one of the
subjects is in the AF frame.
2
Press the shutter button down halfway to
focus on the subject.
AF/AE lock is useful:
Use AF/AE lock to guarantee best result when shooting a
subject that is not suited to autofocusing (➝p.35).
Double
beep
250
Halfway
pressed
34
F4.2
3
Subjects not suitable for autofocus
FinePix A610/FinePix A805 uses a high-precision
autofocusing mechanism. However, it may have difficulty
focusing on the following:
Click
250
Using the Camera
Continue to hold the shutter button down
halfway. Move the camera back to the
original image and press the shutter button
fully.
F4.2
Very shiny subjects such
as a mirror or car body
Fully pressed
CHECK
When using FinePix A610, the camera makes a beep
sound and takes the picture when you press the shutter
button down fully.
MEMO
• AF/AE lock can be applied repeatedly before the shutter
is released.
• Use AF/AE lock in all Photography modes to guarantee
excellent results.
• On FinePix A610/FinePix A805, pressing the shutter
button down halfway locks the focus and exposure
settings (AF and AE lock).
Fast moving subjects
•
•
•
•
•
Subjects photographed through glass
Subjects that do not reflect well, such as hair or fur
Subjects with no substance, such as smoke or flames
Dark subjects
Subjects with little or no contrast between the subject and
the background (such as subjects dressed in the same color
as the background)
• Shots where another high-contrast object (not the subject) is
close to the AF frame and is either closer or further away
than your subject (such as a shot of someone against a
background with strongly contrasting elements)
For such subjects use AF/AE lock (➝p.34).
35
Taking Pictures (AUTO Mode)
Adjusting the shot composition
Select the LCD monitor display.
Press DISP/BACK to change the LCD monitor display.
Best framing
Position the main subject at
the intersection of two lines
in this frame or align one of
the horizontal lines with the
horizon. Use this frame as a
guide to the subject’s size
and the balance of the shot
while composing a shot.
MEMO
Always use AF/AE lock when composing a shot. The
image may be out of focus if AF/AE lock is not used.
Text displayed
No text displayed
Framing guideline
displayed
36
Viewing the Images
Play back your images to check them. For important
photographs, always take a test shot and view the image
to make sure that the camera is working normally.
Select the LCD monitor display.
Press DISP/BACK during Playback mode to change the
LCD monitor display.
Using the Camera
Setting the camera to Playback
mode
Press w during shooting to change to Playback mode.
When the camera is off, press w for about 1 second to
turn the camera on in Playback mode.
MEMO
• When pressing w, the last image shot appears on the
LCD monitor.
• When playing back images shot with a camera other
than FinePix A610/FinePix A805,
a present icon
appears on the LCD monitor.
CAUTION
Still images viewable on FinePix A610/FinePix
A805
This camera will display still images recorded on FinePix
A610/FinePix A805 or still images (excluding some
uncompressed images) recorded on any FUJIFILM digital
camera that supports xD-Picture Cards or SD Memory
Cards. Clear playback or playback zooming may not be
possible for still images shot on cameras other than
FinePix A610/FinePix A805.
2 / 24 / 2007
250
F4.2
10:00 AM
-1 2 3
Text displayed
No text displayed
2007
2 / 22
2 / 23
2 / 24
1/12
Sorting by date
Multi-frame playback
37
Viewing the Images
Single-frame playback
100 - 0001
N
ISO 100
Playback zoom
1
Zoom in / Zoom out.
To zoom in an image during single-frame playback:
] wide zoom
(Zoom out)
2 / 24 / 2007
250
F4.2
[ tele zoom
(Zoom in)
10:00 AM
-1 2 3
To select the required image:
Press p: last image
Press q: next image
Zoom bar
Selecting images
To select images on the
thumbnail lists screen, hold
down p or q for 1 second
during playback.
When releasing p or q,
camera returns to singleframe playback.
Move the zoom switch to [ or
] to zoom in or out of an image.
2
Display another part of the image.
Navigation screen
(Current displayed
image)
Press n, o, p, or q to display another
part of the image.
38
Z Zoom scales (FinePix A805)
Quality mode
i (3296 × 2472 pixels)
Multi-frame playback
Max. zoom scale
Approx. 5.2×
Approx. 5.5×
4 (2304 × 1728 pixels)
Approx. 3.6×
2 (1600 × 1200 pixels)
Approx. 2.5×
Using the Camera
% (3504 × 2336 pixels)
Multi-frame playback screen (9 frames) appears on the
LCD monitor. Select required frame from the 9 frames.
Z Zoom scales (FinePix A610)
Quality mode
Max. zoom scale
5 (2848 × 2136 pixels)
Approx. 4.5×
% (3024 × 2016 pixels)
Approx. 4.7×
3 (2048 × 1536 pixels)
Approx. 3.2×
2 (1600 × 1200 pixels)
Approx. 2.5×
A Press n, o, p, or q to move the cursor
(colored frame) to the selecting frame.
Press n or o repeatedly to jump to the
next page.
MEMO
Pressing DISP/BACK cancels playback zoom.
B Press MENU/OK to enlarge the image.
39
Viewing the Images
Sorting by date
In sorting by date mode, you can view all images taken on
the same day.
2007
2 / 22
2 / 23
2 / 24
Selecting the date
2007
2 / 22
2 / 23
2 /24
12
1 / 12
A Press n, o, p, or q to move the cursor
(colored frame) to the selecting frame.
A Press n, o, p, or q to move the cursor
(colored frame) to
on the upper left
frame.
B Press p to display the selecting date.
B Press MENU/OK to enlarge the image.
C Press n or o to move the cursor (colored
frame) to select the date.
Press n or o repeatedly to jump to the
next page.
D Press q.
40
Erasing the Images/Movies
Use this mode to erase unnecessary images or movies to
have ample free space on the Memory Card or internal
memory. Your camera calls images “frames”.
Erasing the images using
Playback menu
/n)
(n) erases images easily.
Using the Camera
Using the erase button (
Pressing
Setting the camera to w
Playback mode (➝p.37)
PLAYBACK MENU
ERASE
SLIDE SHOW
PRINT ORDER (DPOF )
ERASE OK?
PROTECT
COPY
OK
CANCEL
* FinePix A805
SET
A Press p or q to select the erasing
image.
A Press MENU/OK to open the PLAYBACK
MENU.
B Press n or o to select
B Press
ERASE.
(n).
C Press q.
C Press p or q to select OK.
DPress MENU/OK to erase the displayed
image.
Continued Q
41
Setting the camera to w Playback mode (➝p.37)
Erasing the Images/Movies
PLAYBACK MENU
Erasing one frame at a time (FRAME)
ERASE
BACK
SLIDE SHOW
FRAME
PRINT ORDER (DPOFALL
) FRAMES
ERASE OK?
PROTECT
COPY
* FinePix A805
YES
D Press n or o to select FRAME or ALL
FRAMES.
CANCEL
A Press p or q to select the erasing frame
(file).
E Press MENU/OK to confirm the setting.
B Press MENU/OK to erase the currently
displayed frame (file).
MEMO
To erase another frame (file), repeat above steps.
When erasing frames (files) is completed, press DISP/
BACK.
CAUTION
Pressing MENU/OK repeatedly erases consecutive
frames (files). Take care not to erase a frame (file) by
mistake.
42
Erasing the Images/Movies
Erasing all frames (ALL FRAMES)
YES
CANCEL
Press MENU/OK to erase all the frames
(files).
MEMO
• When using a Memory Card, the images in the Memory
Card are erased. When not using a Memory Card, the
images in the internal memory are erased.
• Selecting BACK returns to single-frame playback
without erasing any frames (files).
• Protected frames (files) cannot be erased. Unprotect
the frames (files) before erasing them (➝p.72).
• If “DPOF SPECIFIED. ERASE OK?” or “DPOF
SPECIFIED. ERASE ALL OK?” appears, press MENU/
OK again to erase the frames (files).
Using the Camera
ERASE ALL OK?
IT MAY TAKE A WHILE
Setting the camera to w Playback mode (➝p.37)
CAUTION
Erased frames (files) cannot be recovered. Back up
important frames (files) onto your PC or another media.
MEMO
Press DISP/BACK to cancel
erasing of all the frames
(files). Some unprotected
frames (files) will be left
unerased.
CANCEL
43
Using the Photography Functions — Procedure of Setting
Specify the camera settings for taking pictures to get the
best result. A general guide is given below.
1
Select the Photography mode.
Set the Photography mode.
The camera settings are tailored to the scene being
shot.
Note that the availability of a shooting mode and its
setting method may vary depending on the mode you
wish to use.
<FinePix A610>
Set the photography mode in the shooting menu. See
p.46 for information on setting shooting mode.
s
AUTO
/m/,/./8/
/
/ / /
/ / / /
This mode provides detailed settings that
are impossible to set in AUTO mode
(➝p.53).
This is the easiest mode for taking
pictures (➝p.49).
Select the best Shooting mode for the
scene being shot (➝p.49-53).
SHOOTING MENU
SHOOTING MODE
AUTO
ISO
AUTO
QUALITY
SET - UP
44
N
<FinePix A805>
Set the photography mode using the mode dial. See p.47
for information on setting shooting mode.
AUTO
/
/b/
/m
?(s/,/./
8/
/ /
/
/ / / /
/ /
)
This is the easiest mode for taking
pictures (➝p.49).
Select the best Shooting mode for the
scene being shot (➝p.49-50).
Select the best shooting mode for the
scene being shot from
SCENE
POSITION in the SHOOTING MENU
(➝p.50-53).
2
Specify the photography settings.
Pressing buttons or selecting menu allows you to
specify photography functions. You can obtain the
best result for shooting.
Z Specifying functions using buttons
Used for close-up shots (➝p.54).
d Flash
Used for shots in dark locations or for
backlit subjects, etc. (➝p.55).
* Self-timer
ISO
Use to specify required sensitivity
setting (➝p.63).
QUALITY
Use to specify required image size
(➝p.64).
EXP.
COMPENSATION
Use this setting to obtain the correct
exposure (only s) (➝p.65).
WHITE
BALANCE
Use to adjust the color tone (only s)
(➝p.66).
Used in situations such as group shots
where the photographer is included in the
shot (➝p.57).
Advanced Features — Photography
e Macro
Z Specifying functions using SHOOTING MENU
(MENU/OK button)
SHOOTING MENU
SCENE POSITION
ISO
e (p) Macro button
d (q) Flash button
* (o) Self-timer button
QUALITY
EXP. COMPENSATION
WHITE BALANCE
M
AUTO
N
+0
AUTO
* FinePix A805
45
Setting the Shooting Mode (FinePix A610)
You can select the most suitable setting according to the subject by selecting one of the Shooting modes.
See p.44 for information on available shooting mode.
CHECK
• See p.56 for information on the available flash modes.
• When anything other than s in the
SHOOTING
MODE is selected, only AUTO can be selected for the
ISO (sensitivity) setting.
PORTRAIT
LANDSCAPE
ANDSCAPE
SPORT
NIGHT
Clear scenic shots
SET
CANCEL
A Press MENU/OK to open the menu.
B Press n or o to select the
MODE.
SHOOTING
C Press q.
D Press n or o to select the setting.
E Press MENU/OK to confirm the setting.
46
Setting the Shooting Mode (FinePix A805)
You can select the most suitable setting according to the subject by selecting one of the Shooting modes.
Turn the mode dial and select the shooting mode.
Z Selecting Scene position setting (? Scene
Position)
Photography functions:
* q AUTO(➝p.49)
*
BABY MODE (➝p.49)
*
PICTURE STABILIZATION (➝p.49)
* b RED EYE REDUCTION(➝p.49)
*
DIGITAL ZOOM(➝p.49)
* m PORTRAIT(➝p.50)
* ? Scene Position
CHECK
,
A Set the Mode dial to ?.
Continued Q
Advanced Features — Photography
You can choose from various types (,, ., 8,
,
,
,
, , , ,
,
, s) of scene.
Select the scene position setting in the
SCENE
POSITION in the SHOOTING MENU.
See p.44 for information on the available .
• See p.56 for information on available flash modes.
• When anything other than s in the
SHOOTING
MODE is selected, only AUTO can be selected for the
ISO (sensitivity) setting.
47
Setting the Shooting Mode (FinePix A805)
MANUAL
LANDSCAPE
SPORT
NIGHT
Clear scenic shots
SET
CANCEL
B Press MENU/OK to open the menu.
C Press n or o to select
POSITION.
SCENE
D Press q.
E Press n or o to select the setting.
F Press MENU/OK to confirm the setting.
48
Shooting Mode
This section describes the available shooting modes.
Note that the availability of a shooting mode and its
setting method may vary depending on the mode you
wish to use. (➝p.46, 47)
AUTO
BABY MODE
This function is suitable for taking pictures of young
children. This mode C suppresses the flash so that you
can take their picture with a natural ambience.
CHECK
CAUTION
Flash fires automatically. Do not use this mode at
situations where the flash cannot be used.
MEMO
When using the flash to take a picture of people in
low-light conditions, eyes may sometimes appear red in
the picture. This is caused by the light of the flash
reflecting off the inside of the eye.
DIGITAL ZOOM (FinePix A805 only)
Using this mode allows you to enlarge your subject
automatically 3x and to shoot an enlarged image quickly.
Further zoom is available by adjusting the zoom switch to
activate optical zoom.
Z Zoom bar display
FinePix A805
Advanced Features — Photography
This is the easiest mode for providing crisp and clear
shots.
Use this mode for ordinary photography.
Camera specifies
EXP. COMPENSATION and
WHITE BALANCE settings automatically.
Setting the mode (➝p.46, 47)
Flash cannot be used in the Baby mode.
PICTURE STABILIZATION
(FinePix A805 only)
This function is suitable for taking a pictures of moving
subjects such as children or pets.
Use this mode to select a fast shutter speed that reduces
camera shake and moving-subject blurring.
bRED EYE REDUCTION
(FinePix A805 only)
Digital zoom: 3×
Optical zoom: 3×
Max. zoom scale: 9×
Continued Q
This mode is suitable for shooting portraits in
low-light conditions.
Use this mode to minimize red-eye (eyes
appear in red in the finished photo).
49
Shooting Mode
CAUTION
• Using the
DIGITAL ZOOM allows you to enlarge
your subject and shoot it. However, it will lower your
image quality. Set the
DIGITAL ZOOM when
requiring it.
• When using
DIGITAL ZOOM, an increasing
‘speckling’ effect might be observed in the LCD monitor.
•
DIGITAL ZOOM is different from
DIGITAL
SET-UP menu. With
ZOOM (➝p.88) selected in
DIGITAL ZOOM, optical zoom adjustment is available
but digital zoom adjustment is not available.
m PORTRAIT
Use this mode for
photography to get
beautiful skin tones and
soft overall tone.
Setting the mode (➝p.46, 47)
. SPORT
Use this mode to take
pictures of a moving subject.
It gives priority to faster
shutter speeds.
8 NIGHT
Use this mode for shooting
evening and night scenes.
A picture is taken with a slow
shutter of up to 3 seconds.
CHECK
, LANDSCAPE
Use this mode for shooting
scenery in daylight and
provides crisp, clear shots of
scenery such as buildings
and mountains.
CHECK
Flash cannot be used in
the Landscape mode.
50
Use a tripod to prevent camera shake, because a picture
is taken with a slow shutter.
Setting the mode (➝p.46, 47)
NATURAL LIGHT (FinePix A805 only)
CHECK
Flash cannot be used in the Natural light mode.
BEACH
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at beach
under strong sunlight.
SNOW
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at snowy
scene where the whole
screen appears white.
Advanced Features — Photography
This mode produces
beautiful images that retain
the natural ambience when
shots are taken in low-light
conditions.
This mode is also ideal for
shooting indoor or situations
where the flash cannot be
used.
Camera sets the high-sensitivity setting when selecting
the Natural light mode. This mode is effective for reducing
camera shake and moving-subject blurring when taking
pictures in low-light conditions.
FIREWORKS
Use this mode to shoot
fireworks.
It is effective for taking
more vivid shots of
fireworks with a slow
shutter.
CHECK
• Flash cannot be used in the Fireworks mode.
• Shutter speed setting: 1/2 sec. to 4 sec.
• Use a tripod to prevent camera shake in the Fireworks
mode.
Z Selecting the exposure time setting
124
4.0"
Press p or q to select the exposure time.
51
Shooting Mode
SUNSET
Use this mode to shoot
sunset, making the colors
more vivid.
Setting the mode (➝p.46, 47)
FLOWER
Use this mode to take
clear close-up shots when
zooming up a flower.
It is effective for taking
more vivid shots of flower
petal.
CHECK
UNDERWATER
Use this mode for shooting
with a waterproof case.
It is effective for taking
more vivid shots of ocean
blue.
• Flash cannot be used in the Flower mode.
• Focal range
Wide angle:
Approx. 10 cm to 2 m (3.9 in. to 6.6 ft.)
Telephoto:
Approx. 35 cm to 2 m (13.8 in. to 6.6 ft.)
PARTY
Use this mode for shooting
at indoor wedding and
party.
This mode produces
beautiful images that retain
the natural ambience when
shots are taken in low-light
conditions.
52
Setting the mode (➝p.46, 47)
MUSEUM
MEMO
Check whether photography is permitted before using this
mode.
TEXT
s MANUAL
Set the Photography functions to manual to easily control
yourself.
Photography functions:
•
EXP. COMPENSATION (➝p.65)
•
WHITE BALANCE (➝p.66)
Advanced Features — Photography
Use this mode for taking
pictures in places such as
museum where the use of
flash and making an
operation sound and a
shutter sound are
restricted.
Flash mode is forcibly set
to Suppressed flash and
operation sound, shutter sound and the self-timer lamp
are off.
CHECK
Focal range
Wide angle:
Approx. 10 cm to 2 m (3.9 in. to 6.6 ft.)
Telephoto:
Approx. 35 cm to 2 m (13.8 in. to 6.6 ft.)
Use this mode to shoot
documents and white
board.
It is effective for taking
clearer shots of letters.
53
e Macro (Close-up)
Use this mode to take close-up shots.
Available Photography modes: s, AUTO,
, ,
(➝p.49, 51, 52, 53)
CAUTION
,
,
Press e (p) to select Macro mode.
Press e (p) again to cancel Macro mode.
,
,
and
are not available on the FinePix A610.
CHECK
• Focal range
Wide angle:
Approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.)
Telephoto:
Approx. 35 cm to 80 cm (1.1 ft. to 2.6 ft.)
• Effective flash range
Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)
MEMO
AUTO
54
4
e appears on the LCD
monitor indicating that you
can take close-up shots.
• When setting
or
mode, the camera sets to
e Macro mode automatically.
• Use a tripod to prevent camera shake in Macro mode.
• Any of the following cancels Macro mode:
- Changing the Shooting mode setting
- Turning the camera off
d Setting the Flash (Intelligent Flash)
Flash photography is useful for taking pictures at night or
indoor dark locations. Choose from 6 flash modes
according to the type of shot. See p.56 for information on
the available Photography modes.
MEMO
This mode is suitable for shooting portraits
in low-light conditions.
Use this mode to minimize red-eye (eyes
appear in red in the finished photo).
On the FinePix A805, you can set this mode
as a shooting mode (p.49).
MEMO Red-eye effect
When using the flash to take a picture of people in lowlight conditions, eyes may sometimes appear red in the
picture. This is caused by the light of the flash reflecting
off the inside of the eye.
d FORCED FLASH
Use this mode in backlit scenes, or to get the correct
colors when taking a picture under bright lighting.
In this mode, the flash fires in bright as well as dark
conditions.
The flash setting
changes each time you
press d(q).
MEMO
When pressing the shutter button down halfway, b
appears on the LCD monitor before the flash fires.
AUTO AUTO FLASH (not displayed)
Use this mode for ordinary photography.
The flash fires as required by the shooting conditions.
Advanced Features — Photography
By calculating subject distance and brightness, the
camera automatically adjusts the flash amount to suit
shooting conditions. This maintains consistent balance of
bright/dark areas across the image in low-light conditions
(dimly-lit room, etc). The Intelligent Flash feature
guarantees consistent results when using the flash.
b RED EYE REDUCTION
C SUPPRESSED FLASH
This mode is suitable for situations where the flash cannot
be used.
Use a tripod to prevent camera shake when shooting in
Suppressed flash mode in the dark condition.
Any time, flash does not fire.
c SLOW SYNCHRO,
n RED EYE & SLOW
This mode allows you to take pictures of people at night
that clearly show both your subjects and the night time
backdrop. To prevent camera shake, always use a tripod.
Using n synchronizes Red-eye reduction mode.
Using 8 selects slow shutter speeds of up to 3 seconds.
55
d Setting the Flash (Intelligent Flash)
CAUTION
CHECK
In bright scenes, overexposure may occur.
List of available flash modes in each Photography mode
(
, b,
and
are not available on the FinePix
A610).
CHECK
Effective flash range ( : AUTO)
<FinePix A610>
Wide-angle:
Approx. 60 cm to 3.5 m (2.0 ft. to 11.5 ft.)
Telephoto:
Approx. 60 cm to 1.9 m (2.0 ft. to 6.2 ft.)
<FinePix A805>
Wide-angle:
Approx. 50 cm to 3.8 m (1.6 ft. to 12.5 ft.)
Telephoto:
Approx. 60 cm to 2.0 m (2.0 ft. to 6.6 ft.)
If you take pictures outside of the effective flash range,
the image may appear dark even if the flash is used.
AUTO
b
d
C
c
n
s
✓
✓
✓
✓
✓
✓
AUTO
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
b
m
✓
✓
✓
✓
✓
✓
✓
✓
✓
CAUTION Notes on using flash
.
• If pressing the shutter button while the flash is charging
(indicator lamp blinking orange), the picture will be
taken without the flash (when using AUTO and b).
• The flash charging time may increase when the
batteries are low on charge.
• When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
• The flash fires several times (pre-flashes and the main
flash). Do not move the camera until the picture is
taken.
8
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
56
✓
✓
,
✓
* Self-Timer
The self-timer is used in situations where the
photographer is included in the shot. When photographer
is away from the camera, use a tripod to prevent camera
fall.
Available Photography modes: All (➝p.49-53)
Setting self-timer
1
Press the shutter button down halfway to
focus on the subject and press the shutter
button fully.
Double
beep
Halfway pressed
AUTO
4
OFF
The last displayed setting
is the selected mode.
: The picture is taken after
10 seconds.
(: The picture is taken after
2 seconds.
Beep
Fully pressed
Pressing the shutter button down halfway that focuses
on the subject.
Without releasing the shutter button, press the button
all the way down (fully pressed) to start the self-timer.
Advanced Features — Photography
The self-timer setting changes each time you press *
(o).
Taking pictures using self-timer
Continued Q
57
* Self-Timer
2
Take pictures in selected time.
Using the 2-second self-timer
This is useful when you worry about camera shake even if
attaching the camera on a tripod.
MEMO
A picture is taken after the self-timer lamp changes
from lit to blinking (only blinks with the 2-second selftimer).
A countdown appears on the
LCD monitor indicating the
time remaining until the
picture is taken.
58
• To stop the self-timer, once it has started running, press
DISP/BACK.
• Any of the following cancels the self-timer setting:
- Completing the shooting
- Changing the Photography mode setting
- Setting the camera to Playback mode
- Turning the camera off
• Take care not to stand in front of the lens when pressing
the shutter button as this can prevent the correct focus
or brightness (exposure) from being achieved.
j Increasing Monitor Brightness
Use this function to increase the brightness of the LCD
monitor temporarily when you have difficulty seeing the
monitor in low-light conditions or in daylight.
Increasing the LCD monitor
brightness
AUTO
124
blinks on the LCD monitor
when the function is on.
• This function is automatically canceled after each shot.
• When this function is active, it will increase the amount
of speckling in images on the LCD monitor. This is
normal and does not affect the photographed image.
• This function is purely for checking the composition of
your shot. It does not increase the brightness of the
image.
• Even if you increase the brightness in low-light
conditions, you cannot check the subject.
• The color tones may vary depending on the subjects.
Advanced Features — Photography
Press j (n) to display the LCD monitor brightly.
Press j (n) again to return to normal LCD monitor
brightness.
MEMO
UP
59
Using SHOOTING MENU
Use the SHOOTING MENU to adjust image quality. You
can take pictures in a wide range of conditions.
SHOOTING MENU
SCENE POSITION
Setting the SHOOTING MENU
AUTO
ISO
QUALITY
EXP. COMPENSATION
SHOOTING MENU
SCENE POSITION
ISO
WHITE BALANCE
M
N
EXP. COMPENSATION
WHITE BALANCE
* FinePix A805
AUTO
QUALITY
AUTO
C Press q.
* FinePix A805
A Press MENU/OK to open the SHOOTING
MENU.
D Press n or o to change the setting.
E Press MENU/OK to confirm the setting.
B Press n or o to select the menu.
60
Z List of SHOOTING MENU options (FinePix A610)
Menu
Functions
Settings
Use this setting to provide the best photography menu setting for the scene s/AUTO/ /m/,/
SHOOTING MODE
being shot.
./8/ /
/ /
(➝p.46)
/ / / / /
Factory
default
AUTO
Specifies required sensitivity setting of the ambient light around the subject.
The larger value of the sensitivity, the higher sensitivity is obtained. The
AUTO/400/200/100
higher sensitivity settings will allow you to take pictures in darker locations.
AUTO
QUALITY (➝p.64)
Specifies the image size.
The larger image size, the better image quality is obtained. The smaller
image size, the larger number of images are recorded.
5F/5N/%/3/
2/`
5N
–2 EV to +2 EV
(1/3 EV increments)
±0
AUTO / 6 / 7 / 9 /
0/-/8
AUTO
EXP.
COMPENSATION
(➝p.65)
WHITE BALANCE
(➝p.66)
This setting can be used when the SHOOTING MODE is set to s.
Use this setting to obtain the correct exposure.
This setting can be used when the SHOOTING MODE is set to s.
Use this setting to adjust the color balance to suit the color of the ambient
light around the subject.
Advanced Features — Photography
ISO (➝p.63)
MEMO
Note that the shooting menu will vary depending on the selected shooting mode.
• When shooting mode is set to other than s.
• When shooting mode is set to s.
SHOOTING MENU
SHOOTING MENU
SHOOTING MODE
AUTO
SHOOTING MODE
ISO
AUTO
ISO
QUALITY
SET - UP
N
QUALITY
M
AUTO
N
EXP. COMPENSATION
WHITE BALANCE
AUTO
Continued Q
61
Using SHOOTING MENU
Z List of SHOOTING MENU options (FinePix A805)
Menu
Functions
Factory
default
Settings
This setting can be used when the Mode dial is set to ?.
SCENE POSITION
Use this setting to provide the best photography menu setting for the
(➝p.47)
scene being shot.
s/,/./8/
/ / / /
/
/
/
/
,
/
ISO (➝p.63)
Specifies required sensitivity setting of the ambient light around the
subject.
The larger value of the sensitivity, the higher sensitivity is obtained.
AUTO/800/400/200/100
The higher sensitivity settings will allow you to take pictures in darker
locations.
AUTO
QUALITY (➝p.64)
Specifies the image size.
The larger image size, the better image quality is obtained. The smaller iF/iN/%/4/2/`
image size, the larger number of images are recorded.
iN
EXP.
COMPENSATION
(➝p.65)
WHITE BALANCE
(➝p.66)
This setting can be used when the SHOOTING MODE is set to s.
Use this setting to obtain the correct exposure.
This setting can be used when the SHOOTING MODE is set to s.
Use this setting to adjust the color balance to suit the color of the
ambient light around the subject.
–2 EV to +2 EV
(1/3 EV increments)
±0
AUTO / 6 / 7 / 9 / 0 /
-/8
AUTO
MEMO
Note that the shooting menu will vary depending on the selected shooting mode.
• When shooting mode is set to q,
,
, b,
, m.
• When shooting mode is set to ,, .,
8,
,
,
,
,
, , , ,
,
(mode dial set to ?).
SHOOTING MENU
ISO
QUALITY
SET - UP
• When shooting mode is set to s
(mode dial set to ?).
SHOOTING MENU
AUTO
N
SHOOTING MENU
SCENE POSITION
SCENE POSITION
ISO
QUALITY
SET - UP
AUTO
N
ISO
QUALITY
N
EXP. COMPENSATION
WHITE BALANCE
62
M
AUTO
AUTO
SHOOTING MENU
Changing the sensitivity setting
(
ISO)
CHECK
Settings
<FinePix A610>
AUTO/400/200/100
<FinePix A805>
AUTO/800/400/200/100
Selecting AUTO as the sensitivity setting, the camera
selects the best sensitivity setting for the subject’s
brightness.
The selected sensitivity
setting appears on the
M
124
ISO 100
LCD monitor when the
sensitivity setting is set to
another setting excluding
AUTO.
MEMO
When anything other than s MANUAL in the
Photography mode is selected, only AUTO can be
selected for the ISO (sensitivity) setting.
CAUTION
Although higher sensitivity settings will allow you to take
pictures in darker locations, they will also increase the
amount of speckling in your images. Choose the
sensitivity setting that best suits the conditions.
Advanced Features — Photography
Use this menu to specify required sensitivity setting of the
ambient light around the subject.
The larger value of the sensitivity, the higher sensitivity is
obtained. The higher sensitivity settings will allow you to
take pictures in darker locations.
Setting the menu (➝p.60)
63
SHOOTING MENU
Changing the quality setting
(
QUALITY)
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Area shot and quality setting
Area shot excluding %
AUTO
N
4
Area shot with %
AUTO
4
Z Quality settings in Photography mode
(FinePix A805)
Quality mode
Sample uses
i F (3296 × 2472) Printing at up to 10R (25.4 × 30.5 cm/
i N (3296 × 2472) 10 × 12 in.) / A4 size / A3 size
For better quality, select i F
% (3504 × 2336)
4 (2304 × 1728)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
2 (1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
` (640 × 480)
To use for e-mail or web site
Z Quality settings in Photography mode
(FinePix A610)
Quality mode
Sample uses
5 F (2848 × 2136) Printing at up to 10R (25.4 × 30.5 cm/
5 N (2848 × 2136) 10 × 12 in.) / A4 size
For better quality, select 5 F
% (3024 × 2016)
64
3 (2048 × 1536)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
2 (1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
` (640 × 480)
To use for e-mail or web site
Normal shooting provides an aspect ratio of 4:3 and %
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to a Memory Card.
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes (➝p.138-139). The
numbers to the right of setting show the number of
available frames.
Setting the menu (➝p.60)
Adjusting exposure
compensation
( EXP. COMPENSATION)
Guide to compensation
• Backlit portraits:
+2/3 EV to +1 2/3 EV
Available Photography mode: s (➝p.53)
EXP. COMPENSATION
+2
• Very bright scenes (such as
snowfields) and highly
reflective subjects: +1 EV
+1
+0
EV
-1
-2
positive (+) compensation
• Shots made up predominantly of sky: +1 EV
• Spotlit subjects, particularly against dark backgrounds:
–2/3 EV
• Scenes with low reflectivity, such as shots of pine trees
or dark foliage: –2/3 EV
Advanced Features — Photography
Use this menu for shots to get the correct brightness
(exposure), such as shots with extremely high contrast
between the subject and the background.
MEMO
negative (–) compensation
• This setting is retained when the camera is turned off
(S icon appears). Set the exposure compensation to
“±0 EV” unless compensation is required.
• Any of the following disables exposure compensation:
- Using the flash in AUTO or b mode
- Shooting dark scenes in d mode
CHECK
• Compensation range: –2 EV to +2 EV
(13 steps in 1/3 EV increments)
• Explanation of Terms “EV” (➝p.142)
• The LCD monitor brightness will increase or decrease
depending on the exposure compensation setting.
65
SHOOTING MENU
Setting the menu (➝p.60)
Adjusting color balance
( WHITE BALANCE)
Available Photography mode: s (➝p.53)
Adjust the color balance based on white to suit the color
of the ambient light around the subject.
WHITE BALANCE
AUTO
AUTO: Automatic adjustment
6 : Shooting outdoors in good weather
7: Shooting in shade
9 : Shooting under Daylight fluorescent lamps
0 : Shooting under Warm White fluorescent lamps
- : Shooting under Cool White fluorescent lamps
8 : Shooting in incandescent light
66
MEMO
• In AUTO mode, the correct white balance may not be
achieved for subjects such as close-ups of people’s
faces and pictures taken under a special light source.
Select the correct white balance for the light source.
• When the flash fires, the white balance setting for the
flash is used. Consequently, to achieve a particular
effect, the flash mode should be set to
C SUPPRESSED FLASH (➝p.55).
• The color tones may vary depending on the shooting
conditions (light source, etc.).
• After taking the picture, check the image color (white
balance).
• Explanation of Terms “White Balance” (➝p.142)
Using PLAYBACK MENU
Use this menu to play back photographed images.
PLAYBACK MENU
Setting the PLAYBACK MENU
ERASE
BACK
FRAME
ALL
PRINT ORDER (DPOF ) FRAMES
SLIDE SHOW
A Press w to set the camera to Playback
mode (➝p.37).
PROTECT
COPY
* FinePix A805
PLAYBACK MENU
E Press n or o to change the setting.
PRINT ORDER (DPOF )
PROTECT
COPY
F Press MENU/OK to confirm the setting.
* FinePix A805
B Press MENU/OK to open the PLAYBACK
MENU.
CAUTION
Menu listing will vary depending on model.
Advanced Features — Playback
ERASE
SLIDE SHOW
C Press n or o to select the menu.
D Press q.
67
Using PLAYBACK MENU
Setting automatic playback
( SLIDE SHOW)
Use this mode to play back photographed images
continuously. You can select playback interval and type of
image transition.
DPOF set frame
( PRINT ORDER (DPOF))
You can specify the image, number of prints, with or
without date of printing with a DPOF-compatible printer.
PLAYBACK MENU
ERASE
PLAYBACK MENU
ERASE
NORMAL
SLIDE SHOW NORMAL
WIPE
PRINT ORDER (DPOF )
WIPE
PROTECT
PROTECT
COPY
* FinePix A805
COPY
* FinePix A805
MEMO
• To interrupt
SLIDE SHOW, press MENU/OK.
• Press p or q to advance or go back through the
images.
• The Auto power off function (➝p.91) does not operate
during slide show.
• Movie starts automatically. When the movie ends, the
playback function moves it on.
• Press DISP/BACK once during playback to display onscreen help.
68
WITH DATE
SLIDE SHOW WITHOUT DATE
RESET) ALL
PRINT ORDER (DPOF
WITH DATEE : The date will be imprinted on your
prints.
WITHOUT DATE : The date will not be imprinted on your
prints.
RESET ALL
: All DPOF settings will be canceled.
Setting the menu (➝p.67)
WITH DATE / WITHOUT DATE
Selecting WITH DATEE, E appears on the LCD
monitor and the date will be imprinted on your prints.
PRINT ORDER (DPOF
DPOF)
DPOF : 00009
Total number of prints
Setting for that frame
MEMO Canceling DPOF setting
A Press MENU/OK to open the PLAYBACK MENU and
press n or o to select
PRINT ORDER (DPOF).
B Press q.
C Press n or o to select WITH DATE E or WITHOUT
DATE and press MENU/OK to display the print order
screen.
D Press p or q to select the frame (file) with the DPOF
setting you want to cancel.
E Press o to set the number of prints to 0 (zero).
01 SHEETS
SET
A Press p or q to display the frame (file)
for specifying DPOF setting.
B Press n or o to set a value.
Up to 99 sheets are printed.
For frames (files) that you do not want
printed, set the number of prints to 0
(zero).
To cancel the DPOF setting for another frame (file),
repeat steps D and E.
Always press MENU/OK to complete the settings.
• RESET ALL (➝p.70)
Continued Q
Advanced Features — Playback
FRAME
To specify more DPOF settings, repeat steps A and B.
C Always press MENU/OK after the settings
are completed.
Pressing DISP/BACK cancels those
settings.
D Press MENU/OK again.
The total number of prints appears on the
LCD monitor.
69
Using PLAYBACK MENU
Setting the menu (➝p.67)
MEMO
• When DPOF settings were specified on another
camera.
RESET ALL
To cancel all DPOF settings:
RESET DPOF OK?
YES
RESET DPOF OK?
NO
When the data includes a frame (file) with DPOF
settings that were specified on another camera,
“
RESET DPOF OK?” appears.
Pressing MENU/OK erases all of the DPOF settings
already specified for each frame (file). Specify the
DPOF setting for each frame (file) again.
• Prints of up to 999 frames (files) can be ordered on the
same Memory Card.
• DPOF settings cannot be specified for movies.
YES
CANCEL
Select RESET ALL in the PLAYBACK MENU (➝p.68).
Press MENU/OK.
MEMO
CAUTION
• Pressing DISP/BACK while choosing settings will
cancel all current settings. If there were previous DPOF
settings, only the modifications are canceled.
• When selecting the WITH DATE E setting, the date is
imprinted on your shots using the Print Service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some
cases).
• Images photographed with a camera other than FinePix
A610/FinePix A805 may not be specified DPOF
settings.
70
100 - 0001
N
ISO 100
2 / 24 / 2007
250
F4.2
10:00 AM
u appears on the LCD monitor during playback when the
image has specified DPOF settings.
Setting the menu (➝p.67)
Z u PRINT ORDER (DPOF)
DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications
for images shot using a digital camera on media such as a Memory Card. The recorded specifications include
information on which frames are to be printed.
This section gives a detailed description of how to order your prints with FinePix A610/FinePix A805.
*Some printers do not support date and time imprinting or specification of the number of prints.
*The warnings shown below may appear while specifying the prints.
“
RESET DPOF OK ?” (➝p.70)
When inserting a Memory Card that contains images specified for printing by another camera, those print specifications are all
reset and replaced by the new print specifications.
[DPOF FILE ERROR] (➝p.125)
Up to 999 images can be specified on the same Memory Card.
Advanced Features — Playback
“DPOF SPECIFIED. ERASE OK ?”
“DPOF SPECIFIED. ERASE ALL OK ?” (➝p.43)
When erasing the image, the DPOF setting for that image is deleted at the same time.
71
Using PLAYBACK MENU
Setting the menu (➝p.67)
Protecting the images
( PROTECT)
SET ALL
SET ALL OK?
IT MAY TAKE A WHILE
Use this mode to prevent frames (files) from being
accidentally erased. Your camera calls images “frames”.
FRAME SET / RESET
YES
To protect or unprotect only the selected frame (file):
PROTECT OK?
UNPROTECT OK?
CANCEL
Press MENU/OK to protect all the frames
(files).
RESET ALL
YES
CANCEL
Unprotected
YES
CANCEL
Protected (F appears)
RESET ALL OK?
IT MAY TAKE A WHILE
A Press p or q to select the protecting/
unprotecting frame (file).
YES
B Press MENU/OK to protect/unprotect the
currently displayed frame (file).
Unprotected: protecting frame (file)
Protected: reset frame (file)
To protect another frame (file), repeat steps A and B.
When protecting frames (files) is completed, press DISP/
BACK.
72
CANCEL
Press MENU/OK to unprotect all the frames
(files).
Setting the menu (➝p.67)
MEMO To stop the procedure midway
Copying the images
(
COPY)
It is possible to transfer saved images between the
internal memory and a Memory Card. Your camera calls
images “frames”.
CANCEL
CAUTION
The Format function erases all the frames (files),
including protected frames (files) (➝p.90).
COPY
INTERNAL MEMORY
CARD
NEXT
CARD
INTERNAL MEMORY
CANCEL
A Press n or o to select Y INTERNAL
MEMORY Q \ CARD or \ CARD Q
Y INTERNAL MEMORY.
Advanced Features — Playback
If the images are very large, protecting or unprotecting all
the frames (files) may take some time.
If you want to take a picture or record a movie during the
procedure, press DISP/BACK.
Z Selecting COPY
B Press q.
Continued Q
73
Using PLAYBACK MENU
Setting the menu (➝p.67)
Copying one frame at a time (FRAME)
COPY OK?
100 - 0001
COPY
INTERNAL MEMORY
CARD
CARD
FRAME
ALL FRAMES
INTERNAL
MEMORY
YES
YES
CANCEL
CANCEL
C Press p or q to select the copying frame
(file).
A Press n or o to select FRAME.
D Press MENU/OK to copy the currently
displayed frame (file).
B Press MENU/OK.
MEMO
To copy another frame (file), repeat steps C and D.
When copying frames (files) is completed, press DISP/
BACK.
74
Setting the menu (➝p.67)
Copying all frames (ALL FRAMES)
COPY ALL OK?
100 - 0001
IT MAY TAKE
A WHILE
COPY
100 - 0001
INTERNAL MEMORY
CARD
CARD
COPY
FRAME
ALL FRAMES
INTERNAL
MEMORY
YES
YES
CANCEL
CANCEL
A Press n or o to select ALL FRAMES.
CAUTION
B Press MENU/OK.
• When [\ MEMORY FULL] or [Y MEMORY FULL]
appears on the LCD monitor, copying the data stops on
the way.
• When copying the image that has specified DPOF
setting, the DPOF setting is not copied.
Advanced Features — Playback
C Press MENU/OK to copy all the frames
(files).
75
Using PLAYBACK MENU
Setting the menu (➝p.67)
Rotating the images
( IMAGE ROTATE)
IMAGE ROTATE
When shooting in the vertical position, the image appears
horizontal on the LCD monitor.
Use this mode to rotate an image and to display correct
direction.
CAUTION
Protected frames (files) cannot be rotated. Unprotect the
frames (files) before rotating them (➝p.72).
MEMO
An image can be rotated only when playing back using
FinePix A610/FinePix A805.
You may not be able to rotate images that were shot with
a camera other than FinePix A610/FinePix A805.
SET
CANCEL
E Press n or o to rotate the image.
o: Rotates the image clockwise at a 90
degree angle.
n: Rotates the image counterclockwise at
a 90 degree angle.
A Press p or q to select the rotating frame
(file).
B Press MENU/OK to open the PLAYBACK
MENU.
C Press n or o to select
ROTATE.
D Press MENU/OK.
76
IMAGE
F Press MENU/OK to confirm the setting.
Next time the image is played back, it will
be automatically rotated.
Press DISP/BACK to cancel rotating the
image.
Setting the menu (➝p.67)
Trimming the images
( TRIMMING)
(FinePix A805 only)
2
] wide zoom
(Zoom out)
Use this mode to trim the required part of the
photographed image.
1
Specify trimming part of image.
[ tele zoom
(Zoom in)
TRIMMING
TRIMMING
Select the menu.
YES
CANCEL
YES
CANCEL
Zoom bar
A Set the zoom switch to [
or ] to zoom in or out of
an image.
B Press p or q to select the trimming
frame (file).
C Press MENU/OK to open the PLAYBACK
MENU.
D Press n or o to select
TRIMMING
Navigation screen
(Current displayed image)
Advanced Features — Playback
A Press w to set the camera to Playback
mode (➝p.37).
TRIMMING.
YES
CANCEL
E Press q.
B Press n, o, p, or q to display another
part of the image.
Continued Q
77
Using PLAYBACK MENU
Setting the menu (➝p.67)
MEMO
C Press MENU/OK.
REC OK?
REC
3
CANCEL
Record the image.
Check the saved image size and press
MENU/OK.
The trimmed image is added as a separate
file in the final frame.
78
• Press DISP/BACK to return to single-frame playback.
• A saved image size varies depending on the zoom
scale of step 2. For 0.3 M, k YES option appears in
yellow.
• Image sizes (FinePix A805)
4
Printing at up to 6R (15.2 × 20.3 cm/6 × 8 in.) /
A5 size
2
Printing at up to 4R (10.2 × 15.2 cm/4 × 6 in.) /
A6 size
`
To use for e-mail or web site
• When % quality setting is selected, the image is
trimmed to normal size (4:3 aspect ratio).
CAUTION
•
trimming is not available on the FinePix A610.
• You may not be able to trim images that were shot with
a camera other than FinePix A805.
r Recording Movies
Use this mode to record movies.
Note that the way to set the Movie mode vary depending
on model. See the instructions below and follow the one
which applies to your camera.
Set the camera to r Movie mode
(FinePix A805)
Set the Mode dial to r.
Set the camera to r Movie mode
(FinePix A610)
MOVIE
MANUAL
AUTO
BABY MODE
SET
CHECK
CANCEL
A Press MENU/OK to open the menu.
B Press n or o to select
MODE.
STANDBY
13s
The available recording
time appears on the LCD
monitor.
SHOOTING
Advanced Features — Movie
Movie recording
C Press q.
Continued Q
D Press n or o to select r MOVIE.
E Press MENU/OK to confirm the setting.
79
r Recording Movies
Z Zooming the image
You must zoom beforehand as you cannot zoom during
recording.
STANDBY
Record movies
REC
13s
12s
Zoom bar
Fully pressed
Set the zoom switch to [ or ]
to zoom in or out of an image.
Press the shutter button down fully to start recording.
During recording, lREC and a counter that shows the
remaining time appear on the LCD monitor.
CHECK
<FinePix A610>
• Optical zoom focal length
Approx. 39 mm to 117 mm (35 mm camera equivalent)
Max. zoom scale: 3×
• Focal range
Approx. 60 cm (2.0 ft.) to infinity
<FinePix A805>
• Optical zoom focal length
Approx. 36 mm to 108 mm (35 mm camera equivalent)
Max. zoom scale: 3×
• Focal range
Approx. 50 cm (1.6 ft.) to infinity
Recording ends when pressing
the shutter button down
halfway during recording or the
remaining time runs out.
Halfway pressed
MEMO
There is no need to hold down the shutter button during
recording.
80
CAUTION
• Specifications: Motion JPEG (➝p.142).
<FinePix A610>
without sound
<FinePix A805>
Monaural sound
• Quality selection method: $ (320 × 240 pixels)
• Frame rate (➝p.142): 30 frames per second (fixed)
• You may not be able to record a movie with sound when
using FinePix A610. Check the “Specifications” in the
“CHECK Recording movies” in the left column.
• Because a movie is recorded onto the Memory Card or
internal memory as it is saved, it cannot be recorded
correctly if the camera suddenly loses power (if the
batteries run out or the AC power adapter is
disconnected).
• A movie file taken by FinePix A610/FinePix A805 may
not be playable on other cameras.
• When using FinePix A805, sound is recorded
concurrently with the images. So make sure not to
cover the microphone with you finger when recording
(➝p.15).
• When using FinePix A805, camera operation noises
may be recorded during movie shooting.
• If you shoot using the xD-Picture Cards with model
numbers containing “M” such as DPC-M1GB, movie
recording time may be reduced if you repeatedly record
and erase (frame erase) image files.
In such a case, erase all frames or format the
xD-Picture Card before use. Back up important frames
(files) onto your PC or another media.
MEMO
• The brightness and color of the LCD monitor shown
during movie recording may differ from those shown
before recording begins.
• Pressing the shutter button down fully fixes the focus,
however the exposure and white balance are adjusted
to the scene being shot.
• If recording is stopped immediately after it begins,
1 second of the movie is recorded onto the Memory
Card or internal memory.
• See p.138-139 for information on recording times per
Memory Card or internal memory.
Advanced Features — Movie
CHECK Recording movies
81
w Playing Back Movies
Setting the camera to w
Playback mode (➝p.37)
Z Playing back movies
Control
100 - 0002
Playback
2 / 24 / 2007
PLAY
11:00 AM
10:00
Pause /
Resume
Pauses the movie during
playback.
Press o again to resume
playback.
Stop
Stops playback.
Press p or q while playback is
stopped to go back to the previous
file or advance to the next file
respectively.
A Press p or q to select the movie file. r
appears on the LCD monitor.
B Press o to begin playing back movie.
30s
STOP
PAUSE
Progress bar
82
Description
Playback begins.
Playback stops when the end of
the movie is reached.
The playback time appears on
the LCD monitor along with a
progress bar.
Fast
forward /
Rewind
Skip
playback
Press p or q during playback to
skip forwards or backwards
through the movie.
Press p or q when the movie is
paused, the movie advances or
goes back one frame.
Hold down p or q to move
through the frames quickly.
Setting the camera to w Playback mode (➝p.37)
MEMO
If the subject of the shot is very bright, white vertical
streaks or black horizontal streaks may appear in the
image during playback. This is normal.
CAUTION
You can adjust the volume of the movie with the FinePix
A805.
VOLUME
7
SET
CANCEL
A Press MENU/OK while playing back
movie.
The movie is paused during playback.
B Press n or o to adjust the volume.
Advanced Features — Movie
• You may not be able to record movie with sound when
using FinePix A610. Check the “Specifications” in the
“CHECK Recording movies” on p.81.
• You may not be able to play back some movie files
recorded on other cameras.
• To play back movie files on a PC, save the movie file on
the Memory Card or internal memory to the PC’s hard
disk and then play back the saved file.
• When using FinePix A805, make sure not to cover the
speaker. The sound is difficult to hear.
Adjusting volume of movies (FinePix
A805 only)
C Press MENU/OK to confirm the setting.
Camera starts to play back the movie.
83
SET-UP
Using the SET-UP menu
1
3
Change the setting.
Open the SET-UP menu.
SET - UP
FORMAT
/ LANG.
AUTO POWER OFF
TIME DIFFERENCE
VIDEO SYSTEM
A Press MENU/OK to open the menu.
B Press n or o to select
5 MIN
2 MIN
OFF
* FinePix A805
SET-UP.
A Press n or o to select the menu.
C Press q.
2
B Press q.
Different type of screen appears
depending on selected item.
Change the page.
SET - UP
FORMAT
/ LANG.
AUTO POWER OFF
TIME DIFFERENCE
VIDEO SYSTEM
ENGLISH
2 MIN
C Press n or o to change the setting.
NTSC
* FinePix A805
A Press p or q to select the page.
D Press MENU/OK to confirm the setting.
CAUTION
Some functions may not be available when using FinePix
A610. Check the “SET-UP menu option” on p.85 for more
information.
B Press o to move to menu item.
84
SET-UP
How to use the SET-UP menu (➝p.84)
SET-UP menu option
CAUTION
Note that the SET-UP menu will vary depending on the camera model. The table below shows the SET-UP menu of the FinePix
A805. Note that the SET-UP menu on the FinePix A610 is displayed only on page q,
, and
.
Setting
Display
Factory default
Explanation
Page
Sets the way for displaying the check image screen
(photograph result) after taking a picture. The
image is displayed for 3 or 1.5 seconds and then
recorded. The color tones in images recorded may
differ from actual color. Play back the recorded
images to check them.
–
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
87
3 SEC/1.5 SEC
1.5 SEC
FRAME NO.
CONT./RENEW
CONT.
DIGITAL ZOOM
ON/OFF
OFF
Specifies whether digital zoom is used together.
88
LCD POWER SAVE
ON/OFF
ON
Darkens the LCD monitor when camera is not used.
89
–
–
Corrects the date or time.
28
Sets the volume of the tone emitted when the
camera controls are used.
–
q
DATE/TIME
BEEP VOLUME
/
/
/
SHUTTER
VOLUME (FinePix
A805 only)
/
/
/
Sets the volume of the sound emitted when the
shutter operates.
PLAYBACK
VOLUME (FinePix
A805 only)
–
7
LCD BRIGHTNESS
–
0
Settings
IMAGE DISP.
–
Sets the volume of playing back movie.
89
Sets the LCD monitor brightness.
90
Continued Q
85
SET-UP
How to use the SET-UP menu (➝p.84)
Setting
FORMAT
Display
–
Factory default
–
ENGLISH
Specifies the language used for LCD monitor
display.
AUTO POWER
OFF
5MIN/2MIN/OFF
2 MIN
TIME
DIFFERENCE
N/I
N
NTSC/PAL
–
Specifies whether video output is set to NTSC or
PAL.
–
–
Discharges Ni-MH batteries.
–
Resets all the camera settings (other than the
DATE/TIME, TIME DIFFERENCE, and VIDEO
SYSTEM) to the factory default values set at
shipment. A confirmation message appears when
you press q. To reset the camera settings, press
p or q to select OK and press MENU/OK.
VIDEO SYSTEM
DISCHARGE
RESET
86
Explanation
Initializes a Memory Card or internal memory.
Select this menu to erase all the frames (files).
–
Page
90
29
Sets the time of turning camera off when camera is
not used.
91
Specifies the time difference settings.
91
–
119
–
SET-UP
How to use the SET-UP menu (➝p.84)
CHECK
FRAME NO.
Frame number
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin
again.
<CONT.>
100 - 0001
File number
<RENEW>
A
B
* Formatted Memory Card or internal memory used for
both A and B.
RENEW : Pictures are stored on each Memory Card
beginning with a file number 0001.
Each image will be numbered consecutively
from the last number used. So when recorded
images in the Memory Card are erased, the
number of the erased frame will not be used
again.
11:00 AM
10:00
Directory number
The last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers, while
the first 3 digits show the directory number.
MEMO
• Setting this function to CONT. makes file management
easier as it makes sure that file names are not
duplicated when images are downloaded to a PC.
• When the camera settings are
RESET (➝p.86), the
frame number setting (CONT. or RENEW) is changed
to CONT. and the frame number itself does not return to
0001.
• In CONT. setting, images are stored beginning from the
highest file number on the current Memory Card when
the Memory Card already contains image files with file
numbers higher than the highest file number on the last
Memory Card.
• The displayed frame number may differ for images
photographed on other cameras.
Settings
CONT. : Pictures are stored beginning from the highest
file number stored on the last Memory Card or
internal memory used.
2 / 24 / 2007
250
F4.2
Continued Q
87
SET-UP
How to use the SET-UP menu (➝p.84)
CHECK
DIGITAL ZOOM
Z FinePix A610
Use this function to shoot enlarged images than
maximum optical zoom scale.
AUTO
N 124
Zoom bar
• Optical zoom focal length*
Approx. 39 mm to 117 mm
• Digital zoom focal length*
Approx. 117 mm to 721 mm
Max. zoom scale: approx. 6.2×
• Digital zoom focal length (%)*
Approx. 120 mm to 741 mm
Max. zoom scale: approx. 6.2×
* 35 mm camera equivalents
Z FinePix A805
Z Zoom bar display
FinePix A610/FinePix A805
OFF
Optical zoom: 3×
ON
Optical zoom: 3×
Digital zoom:
approx. 6.9×*
The above description is based on using the FinePix
A805.
On the FinePix A610, Digital zoom scale is approximately
6.2x.
CAUTION
Using the DIGITAL ZOOM allows you to enlarge your
subject and shoot it. However, it will lower your image
quality. Set the DIGITAL ZOOM when requiring it.
88
• Optical zoom focal length*
Approx. 36 mm to 108 mm
• Digital zoom focal length*
Approx. 108 mm to 746 mm
Max. zoom scale: approx. 6.9×
• Digital zoom focal length (%)*
Approx. 111 mm to 766 mm
Max. zoom scale: approx. 6.9×
* 35 mm camera equivalents
MEMO
When zooming changes between optical and digital, the
position of the “ ” indicator stops. Turn the Zoom switch
to the same direction again to start the “ ” indicator
moving again.
SET-UP
LCD POWER SAVE
The LCD monitor darkens when camera is not used for 8
seconds.
When this function is active, you can save power and get
the maximum possible running time from your batteries.
How to use the SET-UP menu (➝p.84)
PLAYBACK VOLUME (FinePix A805
only)
Use this function to adjust volume while playing back
movie.
VOLUME
MEMO
Pressing any button wakes the camera up.
7
CAUTION
The LCD power save function is disabled during Playback
mode and Movie mode.
SET
CANCEL
Settings
A Press n or o to adjust the volume.
The larger the number, the larger the
volume is emitted. 0 indicates a sound
deadening.
B Press MENU/OK to confirm the setting.
CAUTION
You can not adjust the playback volume of a movie with
the FinePix A610.
Continued Q
89
SET-UP
How to use the SET-UP menu (➝p.84)
LCD BRIGHTNESS
FORMAT
Use this function to adjust the LCD monitor brightness.
Initialize (format) the Memory Card or internal memory for
use with the camera.
LCD BRIGHTNESS
FORMAT
FORMAT OK?
0
ERASE ALL DATA
OK
SET
CANCEL
CANCEL
SET
A Press n or o to adjust the LCD monitor
brightness.
The indicator moves to the + to display the
LCD monitor brightly or to the – to darken
the LCD monitor.
B Press MENU/OK to confirm the setting.
Place of initialize
Y FORMAT:
Internal memory
\ FORMAT:
Memory Card
A Press p or q to select OK.
B Pressing MENU/OK initializes the Memory
Card or internal memory.
CAUTION
• The Format function erases all the frames (files),
including protected frames (files).
Back up important frames (files) onto your PC or
another media.
• Do not open the battery cover or expose the camera to
shock during formatting, as formatting will be
interrupted.
90
SET-UP
How to use the SET-UP menu (➝p.84)
AUTO POWER OFF
TIME DIFFERENCE
When this function is active and the camera remains
unused for 2 or 5 minutes, it turns camera off.
Use this function when you want to get the maximum
possible running time from your batteries.
Use this function when traveling to destinations in
different time zones. This function sets a time difference
relative to the date and time currently set. When this
setting is enabled, the specified time difference is applied
when pictures are taken.
CAUTION
The Auto power off function is disabled during slide show
(➝p.68), discharging rechargeable batteries (➝p.119)
and when a printer or a PC connection (➝p.95, 105) is
being used.
MEMO To restore power to the camera
Refer to “Turning On and Off” (➝p.25).
1
Use Time difference function.
SET - UP
FORMAT
AUTO POWER OFF
TIME DIFFERENCE
VIDEO
IDEO SYSTEM
HOME
LOCAL
Press n or o to change between N HOME
and I LOCAL.
To set the time difference, select I LOCAL.
N HOME: Your home time zone
I LOCAL: Your destination time zone
Settings
* FinePix A805
Continued Q
91
SET-UP
2
How to use the SET-UP menu (➝p.84)
Move to TIME DIFFERENCE screen.
SET - UP
CHECK
Available time setting
–23:45 to +23:45 (in 15-minute increments)
MEMO
FORMAT
AUTO POWER OFF
TIME DIFFERENCE
VIDEO SYSTEM
HOME
LOCAL
M
N 124
* FinePix A805
2 / 24 / 2007
Press q.
3
CHECK
Set time difference.
TIME DIFFERENCE
2 / 24 / 2007
10:00 AM
2 / 24 / 2007
10:00 AM
SET
CANCEL
A Press p or q to select +/–, hour, and
minute.
B Press n or o to change the setting.
C Always press MENU/OK after the settings
are completed.
92
11:00 AM
In the time difference
setting, when you change to
the Photography mode, I
and the date is displayed for
3 seconds, the date display
turns yellow.
Upon returning from a trip, always change the time
difference setting back to N HOME and then check the
date and time again.
Connecting to a TV (FinePix A610)
When connecting to a TV, images can be displayed on wider screen. Using slide show function (➝p.68)
together, you can have fun with folks.
Plug the Video cable (included)
into the VIDEO OUT (Video
output) socket of the camera.
To video (yellow) input socket
Video cable
(included)
AC-3VX
(sold separately)
Plug the other end of the cable into the
Video input socket on the TV.
MEMO
• When connecting the Video cable (included) to TV, the
LCD monitor is turned off.
• The image quality for movie playback is lower than for
still images.
• Refer to the instructions provided with your TV for more
information on video input for your TV.
• Use the AC-3VX (sold separately) when FinePix A610
is connected to a TV for long periods.
Camera Connection
CAUTION
• Plug the Video cable (included) and the AC power
adapter (sold separately) correctly and push them in
each terminal.
• See p.119 for the information of the AC power adapter
(sold separately).
93
Connecting to a TV (FinePix A805)
When connecting to a TV, images can be displayed on wider screen. Using slide show function (➝p.68) together, you can have
fun with folks.
Plug the A/V cable (included) into
the A/V OUT (Audio/Visual
output) socket of the camera.
Video (yellow)
A/V cable
(included)
AC-3VX
(sold separately)
To terminals
Audio (white)
Plug the other end of the cable into the
audio/video input socket on the TV.
94
CAUTION
MEMO
• Plug the A/V cable (included) and the AC power adapter
(sold separately) correctly and push them in each
terminal.
• See p.119 for the information of the AC power adapter
(sold separately).
• When connecting the A/V cable (included) to TV, the
LCD monitor is turned off.
• The image quality for movie playback is lower than for
still images.
• When connecting to a TV, even if you adjust the volume
from the
PLAYBACK VOLUME, the TV volume
cannot be changed. Refer to the instructions provided
with your TV for more information on audio/video input
for your TV.
• Use the AC-3VX (sold separately) when FinePix A805
is connected to a TV for long periods.
Connecting Camera Directly to Printer — PictBridge Function
When a printer that supports PictBridge is
available, images can be printed by connecting
the camera directly to the PictBridgecompatible printer without a PC.
2
“
USB” appears on
the LCD monitor.
USB
Connecting to a printer
1
Connect the camera to a printer and turn the
printer on. Press w for about 1 second to
turn the camera on.
Connect the camera to your printer using
the USB cable (mini-B).
; USB socket (mini-B)
3
The following screen appears on the LCD
monitor after a moment.
AC-3VX
(sold separately)
USB cable
(mini-B)
00 SHEETS
FRAME
OK
SET
MEMO
Camera Connection
“Specifying images for
printing”
➝p.96
“Printing with DPOF setting”
➝p.97
PICTBRIDGE
TOTAL : 00000
Depending on the printer, some functions are disabled.
MEMO
Use the AC-3VX (sold separately) when FinePix A610/
FinePix A805 is connected to a printer.
95
Connecting Camera Directly to Printer — PictBridge Function
Specifying images for printing
(PRINT WITH DATE / PRINT
WITHOUT DATE)
PRINT THESE FRAMES
TOTAL : 9 SHEETS
PICTBRIDGE
TOTAL : 00002
YES
D Press MENU/OK again to download the
data to the printer and start printing the
specified number of prints.
02 SHEETS
FRAME
OK
CANCEL
SET
MEMO
A Press p or q to display the frame (file)
for specifying PRINT setting.
Even if MENU/OK is pressed with total number of images set
at 0 (zero), the screen printing once appears on the LCD
monitor. Press MENU/OK again and printing starts.
B Press n or o to set a value.
Up to 99 sheets are printed.
MEMO Printing with date
PICTBRIDGE
To specify more PRINT settings, repeat steps A and B.
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
C Press MENU/OK to display the confirm
setting.
A Press DISP/BACK to
display the setting
display.
B Press n or o to select
PRINT WITH DATEE.
C Press MENU/OK.
CAUTION
PRINT WITH DATEE is not available when the camera
is connected to a printer that does not support date
printing.
96
Printing with DPOF setting
(u PRINT DPOF)
PRINT DPOF OK?
TOTAL : 9 SHEETS
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
YES
CANCEL
D Press MENU/OK again to download the
data to the printer and start printing the
specified frames (files) continuously.
A Press DISP/BACK to open the menu.
B Press n or o to select u PRINT DPOF.
To select uPRINT DPOF, the DPOF settings must be
specified on FinePix A610/FinePix A805 beforehand
(➝p.68).
CAUTION
Even when WITH DATEE is specified in the DPOF
settings (➝p.68), the date is not inserted on printers that
do not support date printing.
Continued Q
Camera Connection
C Press MENU/OK to display the confirm
setting.
CHECK
97
Connecting Camera Directly to Printer — PictBridge Function
MEMO
MEMO
PRINTING
DPOF setting can be specified for images on internal
memory.
CAUTION
CANCEL
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be
canceled immediately or printing may stop midway
through.
When printing stops midway, briefly turn the camera off
and then on again.
Disconnecting the printer
A Check that “PRINTING” is not displayed on the
camera’s LCD monitor.
B Turn the camera off. Unplug the USB cable (mini-B).
98
• In PictBridge function, images photographed on other
than a camera may not be printed.
• The camera cannot be used to specify printer settings
such as the paper size and print quality.
• Use internal memory or a Memory Card that was
formatted on FinePix A610/FinePix A805.
• Movies cannot be printed.
• Images photographed with a camera other than FinePix
A610/FinePix A805 may not be printed.
Installation on a Windows PC
Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Operating System*1
Windows 98 SE
Windows Millennium Edition (Windows Me)
Windows 2000 Professional*2
Windows XP Home Edition*2
Windows XP Professional*2
Windows Vista*2
CPU
200 MHz Pentium minimum
(Windows XP/Vista users: 800MHz Pentium 4 or better recommended)
RAM
128 MB minimum (512 MB minimum for Windows Vista)
Hard disk space
Amount required for installation: 450 MB minimum
Amount required for operation: 800 MB minimum
Display
1024 × 768 pixels or better, 16-bit color or better
Internet connection*3
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 kbps or better recommended
CAUTION
Software Installation
*1 Models with one of the above operating systems pre-installed.
*2 When you install the software, login using a system administrator account (e.g. “Administrator”).
*3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
Note that the software to be installed is different depending on the OS. (Windows 98SE/Me: FinePixViewer, Windows 2000
Professional/XP/Vista: FinePixViewer S)
Continued Q
99
Installation on a Windows PC
Z Recommended system
Operating System
Windows XP
CPU
2 GHz Pentium 4 or better recommended 3 GHz Pentium 4 or better recommended
Windows Vista
RAM
512 MB or better recommended
1 GB or better recommended
Hard disk space
2 GB or better
15 GB or better
Display
1024 × 768 pixels or better, Highest (32
bit)
1024 × 768 pixels or better, Highest (32
bit)
Internet connection
Broadband (ADSL, FTTH, CATV, etc.)
Broadband (ADSL, FTTH, CATV, etc.)
MEMO
• Connect the camera directly to the PC using the USB cable (mini-B). The software may not operate correctly when you use an
extension cable or connect the camera via a USB hub.
• When your PC has more than one USB port, the camera can be connected to either port.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
• Windows 95, Windows NT and Windows 98 cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
• When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for the FinePix Internet Service
are deleted from your PC. Enter your registered user ID and password and download the menu again.
100
Do not connect the camera to your PC
until the software installation is
completed.
1
CHECK
For Windows Vista users:
When loading the bundled CD-ROM on your PC, the
“AutoPlay” window may appear. In this case, click
“SETUP.exe”.
When “User Account Control” window appears, click
“Allow”.
Install FinePixViewer as instructed in the
Quick start guide.
Launching the installer manually
Installing other applications
A Double-click the “My Computer” icon.
* Windows XP users should click “My Computer” in the “Start”
menu.
Windows Vista users should click “Computer” in the “Start”
menu.
B Right-click “FINEPIX” (CD-ROM drive) in the “My
Computer” window (Windows Vista users: in the
“Computer” window) and select “Open”.
C Double-click “SETUP” or “SETUP.exe” in the CD-ROM
window.
You may see messages for installing Windows Media Player.
Install this application as directed by the on-screen
instructions.
2
Install DirectX as directed by the on-screen
instructions and then restart your PC. If the
latest version of DirectX is already installed
on your PC, this installation is not
performed.
* The way file names are displayed differs as described below
depending on your PC settings.
-File extensions (3-letter suffixes indicating the file type)
may be shown or hidden. (e.g. Setup.exe or Setup)
-Text may be shown normally or all in uppercase (e.g. Setup
or SETUP).
• If the latest version is already installed, this window
does not appear.
• Do not remove the CD-ROM during this procedure.
3
After restarting the PC, a message appears
stating “Installation of the FinePixViewer
has been completed”.
Software Installation
CAUTION
101
Installation on a Mac OS X
Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Compatible Mac*1
Power Macintosh G3*2, PowerBook G3*2,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5, MacBook,
MacBook Pro or Mac Mini
Operating System
Mac OS X (compatible with version 10.3.9 to 10.4.8)
RAM
256 MB or better recommended
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
Display
800 × 600 pixels or better, at least 32,000 colors
Internet connection*3
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 kbps or better recommended
*1 PowerPC, Intel processor loaded
*2 Models with a USB port as a standard feature
*3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CAUTION
• Connect the camera directly to the Macintosh using the USB cable (mini-B). The software may not operate correctly if you use an
extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
102
1
Turn your Macintosh on and start up Mac
OS X. Do not launch any other applications.
2
When the bundled CD-ROM is loaded into
the CD-ROM drive, the “FinePix” icon
appears. Double-click the “FinePix” icon to
open the “FinePix” volume window.
3
4
Double-click on “Installer for MacOSX”.
The Installer setup dialog appears. Click the
[Installing FinePixViewer] button.
CAUTION
For more information on what is installed, click the [Read
Me First] button and [Using FinePixViewer] button.
5
The “Authenticate” dialog appears.
Enter the name and password for the
administrator account and then click the
[OK] button.*
* The administrator account is the user account used for
Mac OS X installation and you can confirm the user
account in the Accounts dialog in the System
Preferences.
The “License” dialog appears. Read the
agreement carefully and then, if you agree
to the terms of the Agreement, click the
[Accept] button.
7
The “Read me” dialog appears. Click the
[Continue] button.
8
The “FinePixInstallOSX” window appears.
Click the [Install] button to install
FinePixViewer.
9
The “FinePixViewer installation completed”
message dialog appears. Then click exit
button and close it.
Software Installation
6
CAUTION
When Safari is used as the Web browser, a message may
be displayed and the CD-ROM may not be removed. If
this happens, click the Safari icon in the Dock to make
Safari the active application and then select “Quit Safari”
in the “Safari” menu to shut down Safari.
103
Installation on a Mac OS X
10 Launch “Image Capture” from the
“Applications” folder.
11 Change the Image Capture settings.
13 Select “FPVBridge” from “FinePixViewer”
folder in the “Applications” folder and click
the [Open] button.
Select “Preferences...” from the “Image
Capture” menu.
12 Select “Other...” from “When a camera is
connected, open”.
14 Select “Quit Image Capture” menu in the
“Image Capture” menu.
104
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
MEMO
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
Refer to Software
Installation (➝p.99, 102)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
CAUTION
• Do not format the Memory Card in the camera on the
PC.
• Use the Memory Card with images taken by a
FUJIFILM Digital camera.
• When connecting to a PC, if the Memory Card contains
large image or movie files, connection or transmission
may take time or images may not be stored. In these
cases, use the Image Memory Card Reader (sold
separately), etc. Note that the Image Memory Card
Reader DPC-R1 is not compatible with the SD Memory
Card.
B Connect the camera to your PC using the USB cable
(mini-B).
CD-ROM
(Software for FinePix)
AC-3VX
(sold separately)
Software Installation
A Insert the Memory Card with images into the camera
(➝p.22).
You can use the xD-Picture Card and the SD
Memory Card with the FinePix A610 and FinePix
A805. In this Owner’s Manual, these cards are
expressed as “Memory Card”.
USB socket
(mini-B)
C Press w for about 1 second to turn the camera on in
Playback mode.
Continued Q
105
Connecting to a PC
106
CAUTION
D Set a PC.
• FinePix A610/FinePix A805 is compatible with PTP
(Picture Transfer Protocol)/MTP (Media Transfer
Protocol). A PTP/MTP-compatible camera is a camera
which can recognize the PC and printer automatically
when connected.
• Always use the FUJIFILM AC Power Adapter AC-3VX
(sold separately). If the camera suddenly loses power
during data exchange, the Memory Card or internal
memory could be damaged.
• Do not disconnect the USB cable (mini-B) when the
camera is communicating with a PC. If disconnecting
the USB cable (mini-B) during communication, the files
on the Memory Card or internal memory may cause
damage.
• In Mac OS X, you must set the automatic setup when
the first time you connect the camera to your PC.
• Make sure that USB cable (mini-B) is connected
correctly and pushed in.
• Perform pre-arranged steps to disconnect and turn off
the camera (➝p.108).
• When the camera and PC are exchanging data, the
indicator lamp blinks alternately green and orange.
• Auto power off is disabled during PC connection.
• Before replacing the Memory Card, always disconnect
the camera from the PC. See p.108 for information on
the disconnection procedure.
• The camera and PC may be exchanging data even
when “Copying” disappears on your PC screen. Before
disconnecting the USB cable (mini-B), always check
that the indicator lamp is off.
• When Windows 98 SE is used, the supplied software
must be installed first before connecting the camera to
a PC using the USB cable. The PC will not recognize
the camera if it is connected before the installation.
Windows 98 SE / Me / Macintosh
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
• FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button,
press POWER to turn off the camera and then
disconnect it from the PC.
Windows 2000 Professional
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
Windows XP / Vista
A The help message appears in the bottom-right corner
of your screen. This message will close when the
settings are completed. No action is required.
CAUTION
This step is not required for subsequent connections.
FinePixViewer S automatically starts up and the Load
Photos window appears. Follow the instructions provided
on screen to save the images. To proceed without saving
the images, click the [Cancel] button.
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button,
press POWER to turn off the camera and then
disconnect it from the PC.
Software Installation
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button,
press POWER to turn off the camera and then
disconnect it from the PC.
B FinePixViewer S automatically starts up and the Load
Photos window appears. Follow the instructions
provided on screen to save the images. To proceed
without saving the images, click the [Cancel] button.
Proceed to “Using FinePixViewer” (➝p.109).
Continued Q
107
Connecting to a PC
Disconnecting the camera
Windows 2000 Professional / XP / Vista
1
Once the image has been saved, the window below
appears.
Windows 98 SE / Me
Once the image has been saved, the window below
appears (Save Image Wizard window). To disconnect
the camera, click the [Remove] button.
Macintosh
Once the image has been saved, the window below
appears. To disconnect the camera, click the [OK]
button.
108
2
A Press POWER to turn the camera off.
Using FinePixViewer
Mastering FinePixViewer
For all information on FinePixViewer functions, refer to
“How to Use FinePixViewer” in the Help menu for details.
• What is explained in “How to Use FinePixViewer”...
“How to Use FinePixViewer” covers a range of topics,
including batch processing and ordering prints.
Continued Q
B Unplug the USB cable (mini-B) from the camera.
Software Installation
109
Connecting to a PC
Uninstalling the software
Only perform this operation when you no longer require
the installed software or when the software was not
installed correctly.
Windows
D The “Add or Remove Programs” (Windows Vista users:
“Programs and Features”) window appears. Select the
software to be uninstalled (FinePixViewer S,
FinePixViewer or the driver) and then click the
[Change/Remove] button (Windows Vista users:
[Uninstall/Change] button).
A Check that the camera is not connected to the PC.
B Quit all currently running applications.
C Open the “My Computer” (Windows XP/Vista users
should click “Control Panel” in the “Start” menu.)
window. Then open the “Control Panel” (Windows
Vista users: open the “Programs”) and double-click on
“Add/Remove Programs” (Windows Vista users:
“Programs and Features”).
To remove FinePixViewer
To remove the driver
software
110
E When the message appears, click the [OK] button.
Check your selection carefully since the process
cannot be canceled once you click the [OK] button.
F Automatic uninstallation begins.
When uninstallation ends, click the [OK] button.
Macintosh
Quit FinePixViewer. Then drag the installed
FinePixViewer folder to the Trash and select “Empty
Trash” in the “Finder” menu.
Software Installation
111
System Expansion Option
By using FinePix A610/FinePix A805 together with other optional FUJIFILM products, your system can be expanded to fill a
wide range of uses.
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
Z Audio/Visual
Z Image
TV monitor
(commercially available)
USB (mini-B)
output*
input/output to the PC
Personal Computer
(commercially available)
Audio/Visual
output*
Image Memory Card
Reader DPC-R1
(USB)
* This will not work with an
SD Memory Card.
Z Printing
* This will not work with an
Intel processor-loaded
Macintosh and Windows
Vista-loaded PC.
USB (mini-B)
SD Memory xD-Picture
Card
Card
PC Card Adapter DPC-AD
PictBridge-compatible
Printer
(commercially available)
Printer
(commercially available)
(PC card slot)
* This will not work with an
SD Memory Card.
DPC-C
F
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
for
xD-P
icture
Card
CompactFlash™
Card Adapter DPC-CF
(CF card slot)
* This will not work with an SD
Memory Card.
112
* Sound cannot be recorded with the FinePix A610.
Accessories Guide
Visit the FUJIFILM web site for the latest information on camera accessories.
http://www.fujifilm.com/products/digital/index.html
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
• xD-Picture Card
Use the following xD-Picture Cards:
16MB/32MB/64MB/128MB/256MB/512MB/1GB/2GB
There are two types of xD-Picture Card: standard type and Type M (containing “M” in the model
number, such as DPC-M2GB).
FinePix A610/FinePix A805 is compatible with Type M, however they may not be compatible depending
on the device used (Image Memory Card Reader, etc.).
• AC Power Adapter AC-3VX
Use the AC-3VX when taking pictures or play back images for long periods or when FinePix
A610/FinePix A805 is connected to a PC.
* The shape of the AC power adapter, the plug, and power outlet depend on the country.
• Soft Case SC-FXA03/Soft Case SC-FXA04
This is a special case made of polyurethane that protects the camera against soil, dust, and minor
impacts when it is being carried.
Continued Q
Appendices
113
Accessories Guide
• Image Memory Card Reader DPC-R1
The DPC-R1 provides a quick and easy way to transfer images back and forth between your PC and an
image memory card (xD-Picture Card and SmartMedia). The DPC-R1 uses the USB interface for highspeed file transfer.
* This will not work with an Intel processor-loaded Macintosh and Windows Vista-loaded PC.
- Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 4 MB to 128 MB.
This is not compatible with the SD Memory Card.
• PC Card Adapter DPC-AD
The PC Card Adapter allows the xD-Picture Card and SmartMedia to be used as a PC Card Standard
ATA-compliant (PCMCIA 2.1) PC card (Type u).
- Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 2 MB to 128 MB.
This is not compatible with the SD Memory Card.
• CompactFlash™ Card Adapter DPC-CF
Loading an xD-Picture Card into this adapter allows you to use the card as a CompactFlash card (Type
s).
- This is not compatible with the SD Memory Card.
• Waterproof Case WP-FXA800
This waterproof case protects your FinePix A610/FinePix A805 from water damage yet allows you to make
camera adjustments and use the flash.
Dive up to 3 meters (9.8 feet) underwater with your FinePix A610/FinePix A805 digital camera.
114
DPCCF
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
for
xD-P
ictur
e Card
Using Your Camera Correctly
Read this information and the “Safety Notes” (➝p.151), to
make sure you use your camera correctly.
Z Places to Avoid
Do not store or use the camera in the following types of
locations:
• In the rain or in very humid, dirty, or dusty places
• In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer
• Extremely cold places
• Places with strong vibration
• Places with smoke or steam
• Places subject to strong electric magnetic fields (such
as near broadcasting tower, power lines, radar, motors,
transformers, magnets, etc.)
• In contact with chemicals such as pesticides
• Next to rubber or vinyl products
Z Damaged by Water or Sand
FinePix A610/FinePix A805 can be damaged on the
inside and outside by water and sand. When you are at
the beach or close to water, make sure that the camera is
not damaged by water or sand. Take care not to place the
camera on a wet surface.
Z Cleaning Your Camera
• Use a blower brush to remove any dust on the lens or
LCD monitor, and then gently wipe the camera with a
soft, dry cloth. If any soil remains, apply a small amount
of lens cleaning liquid to a piece of FUJIFILM lens
cleaning paper and wipe gently.
• Do not scratch hard objects against the lens or LCD
monitor.
• Clean the body of the camera with a soft, dry cloth. Do
not use volatile substances or cleaning products these
items can cause damage.
Z Using the Camera When Traveling
When traveling overseas, do not place your camera in the
check-in baggage. Baggage can be subjected to violent
shocks, and the camera may be damaged inside or
outside.
Appendices
Z Damaged by Condensation
If the camera is carried from a cold location into a warm
place, water droplets (condensation) may form on the
inside of the camera or on the lens. When this occurs, turn
the camera off and wait an hour before using the camera.
Condensation may also form on the Memory Card. In this
event, remove the Memory Card and wait a short time.
Z When the Camera is Not Used or is stored Periods
of Time
If you do not intend to use the camera for a long period of
time, remove the batteries and the Memory Card.
115
Power Supply and Batteries
Applicable Batteries
• In the camera, use AA-size alkaline or Ni-MH (nickelmetal hydride) rechargeable batteries.
Do not use AA-size manganese, nickel-cadmium (NiCd) or lithium batteries in your FinePix A610/FinePix
A805 because the heat created by the batteries could
damage the camera or cause it not to work.
• The life of alkaline batteries varies between brands. The
life of batteries you purchase may be shorter than those
provided with the camera.
Notes on the Batteries
Incorrect use of the batteries could cause them to leak,
become hot, ignite, or burst. Always observe the
precautions given below.
• Do not heat the batteries or throw them into a fire.
• Do not carry or store batteries with metal objects such
as necklaces or hairpins.
• Do not expose the batteries to water, and keep batteries
from getting wet or stored in moist locations.
• Do not attempt to take apart or change the batteries,
including battery casings.
• Do not subject the batteries to strong impacts.
• Do not use batteries that are leaking, deformed,
discolored.
• Do not store batteries in warm or humid places.
• Keep the batteries out of reach of babies and small
children.
• Make sure that the battery polarity (+ and ,) is
correct.
• Do not use new with used batteries. Do not use charged
and discharged batteries together.
• Do not use different types or brands of batteries at the
same time.
116
• If you do not intend to use the camera for a long period
of time, remove the batteries from the camera. Note if
the camera is left with the batteries removed, the time
and date settings are cleared.
• The batteries feel warm right after being used. Before
removing the batteries, turn the camera off and wait for
the batteries to cool down.
• Since batteries do not work well in cold weather or
locations, warm the batteries by placing them inside
your garments before use. Batteries do not work well
when cold. They will work again when the temperature
returns to normal.
• Soil (such as fingerprints) on the battery terminals
makes the batteries charge less reducing the number of
images. Carefully wipe the battery terminals with a soft
dry cloth before loading.
If any liquid at all leaks from the batteries, wipe the
battery compartment thoroughly and then load new
batteries.
If any battery fluid comes into contact with your hands
or clothing, flush the area thoroughly with water. Note
that battery fluid can cause loss of eyesight if it gets
into your eyes. If this occurs, do not rub your eyes.
Flush the fluid out with clean water and contact your
physician for treatment.
Using the AA-size Ni-MH batteries correctly
CAUTION
Do not use the “Discharging rechargeable batteries”
function when alkaline batteries being used.
• To charge Ni-MH batteries, use the Battery Charger
BC-NH02 (included). Refer to the instructions supplied
with the charger to make sure that the charger is used
correctly.
• Do not use the battery charger to charge other batteries.
• Note that the batteries feel warm after being charged.
• Due to the way the camera is constructed, a small
amount of current is used even when the camera is
turned off. Note in particular that leaving Ni-MH
batteries in the camera for a long period will
overdischarge the batteries and may render them
unusable even after recharging.
• Ni-MH batteries will self-discharge even when not used,
and the time for which they can be used may be
shortened as a result.
• Ni-MH batteries will deteriorate rapidly if
overdischarged (e.g. by discharging the batteries in a
flashlight). Use the “Discharging rechargeable
batteries” function provided in the camera to discharge
the batteries.
• Ni-MH batteries have a limited service life. If a battery
can only be used for a short time even after repeated
discharge-charge cycles, it may have reached the end
of its service life.
Z Disposing of Batteries
When disposing of batteries, do so in accordance with
your local waste disposal regulations.
Appendices
• As a power source in digital cameras, AA-size Ni-MH
batteries (referred to hereafter as Ni-MH batteries) are
superior to alkaline batteries in several ways, such as
allowing more shots to be taken with the camera.
However, care must be taken with the way Ni-MH
batteries are used if their original performance is to be
maintained.
• Ni-MH batteries left unused in storage for long periods
can become “deactivated”. Also, repeatedly charging
Ni-MH batteries that are only partially discharged can
cause them to suffer from the “memory effect”.
Ni-MH batteries that are “deactivated” or affected by
“memory” suffer from the problem of only providing
power for a short time after being charged. To prevent
this problem, discharge and recharge them several
times using the camera’s “Discharging rechargeable
batteries” function. By repeating this cycle several
times, the temporary reduction in performance caused
by “memory” or “deactivation” can be remedied and the
batteries can be restored to their original performance
levels.
Deactivation and memory are specific to Ni-MH
batteries and are not in fact battery faults. See p.119121 for the procedure for “Discharging rechargeable
batteries”.
Continued Q
117
Power Supply and Batteries
Notes on Using the Battery Charger
• The battery and battery charger themselves will
become warm due to the power stored inside them. This
is normal and does not indicate a fault. Wherever
possible, use the battery charger in a well-ventilated
location.
• There may be vibration noises from inside the battery
charger during use. This is normal and does not indicate
a fault.
• Do not use the battery charger to charge batteries other
than Ni-MH batteries.
• The battery charger could cause interference if placed
close to a radio during charging. In this event, move the
radio and charger further apart.
• Do not leave the battery charger in the following types
of locations:
• Extremely humidity or high temperatures, such as
close to a heating appliance or in direct sunlight
• Places with strong vibration
• In very dusty places
• The battery charger accepts input voltages of 100-240
V AC at 50 or 60 Hz and can be used all over the world.
However, the shape of the plug and socket-outlet
depends on the country of use. Consult your travel
agent for details.
118
Z Battery Charger BC-NH02 Specifications
Rated input
100-240 V AC, 50/60 Hz
Input capacity
100-240 V -0.08 A
Rated output
1.2 V DC, 550 mA × 2
Applicable
AA-size Ni-MH Battery × 2
batteries
Charging time
Approx. 5 hours
Dimensions
70 mm × 65 mm × 23.3 mm
(2.8 in. × 2.6 in. × 0.9 in.)
(L × W × D)
Mass (Weight)
Approx. 60 g (2.1 oz.)
(excluding batteries)
Operating
0°C to + 40°C
temperatures
(+ 32°F to + 104°F)
AC Power Adapter
Discharging rechargeable
batteries
The Discharging rechargeable batteries function can only
be used with Ni-MH batteries.
The Discharging rechargeable batteries function should
not be used with alkaline batteries as it will completely
drain the battery charge.
Use the Discharging rechargeable batteries function in
the following situations:
• When the batteries only last for a short time after being
charged normally
• When the batteries have not been used for a long period
• When you purchase new Ni-MH batteries
Do not use the Discharging rechargeable batteries
function while using the AC power adapter. In these
situations, the Ni-MH batteries will not be discharged due
to the external power supply.
Continued Q
Appendices
Always use the AC Power Adapter AC-3VX with the
camera.
The use of an AC power adapter other than AC-3VX can
be damaged to your digital camera.
• Use the AC power adapter for indoor use only.
• Plug the connection cord plug securely into the DC input
terminal of the FUJIFILM Digital camera.
• Turn off the FUJIFILM Digital camera before
disconnecting the cord from the FUJIFILM Digital
camera’s DC input terminal. To disconnect, pull out the
plug gently. Do not pull on the cord.
• Do not use the AC power adapter with any device other
than your camera.
• During use, the AC power adapter will become hot to
the touch. This is normal.
• Do not take apart the AC power adapter. Doing so could
be dangerous.
• Do not use the AC power adapter in a hot and humid
place.
• Do not subject the AC power adapter to strong shocks.
• The AC power adapter may emit a humming. This is
normal.
• If used near a radio, the AC power adapter may cause
static. If this happens, move the camera away from the
radio.
119
Power Supply and Batteries
To discharge rechargeable batteries:
SET - UP
PLAYBACK MENU
IMAGE ROTATE
DISCHARGE
RESET
TRIMMING
SET - UP
* FinePix A805
A Press w for about 1 second to turn the
camera on.
* FinePix A805
E Press p or q to select
on the FinePix A610.).
(Select
B Press MENU/OK to open the menu.
F Press n or o to select
C Press n or o to select
SET-UP.
G Press q.
D Press q to open the SET-UP menu.
DISCHARGE
DO NOT EXECUTE
WITH NON Ni - MH
RECHARGEABLE BATTERIES
YES
CANCEL
H Press MENU/OK.
120
DISCHARGE.
DISCHARGE
DISCHARGE OK?
IT MAY TAKE A WHILE
FOR DISCHARGING
OK
CANCEL
SET
I Press p or q to select OK.
J The screen changes and discharging
begins.
When the battery level indicator blinks red
and discharging ends, the camera turns
off.
CAUTION
To cancel discharging, press DISP/BACK.
Appendices
121
Notes on the xD-Picture Card™, the SD Memory Card and the Internal Memory
Z Handling Memory Card
• When inserting the Memory Card into the camera, hold
the Memory Card straight as you push it in.
• Never remove the Memory Card or turn the camera off
during data recording or erasing (Memory Card
formatting) as this could be damaged to the Memory
Card.
• The use of xD-Picture Cards is recommended with
FinePix A610/FinePix A805.
The recording quality cannot be guaranteed when xDPicture Cards other than those manufactured by
FUJIFILM are used.
• The Memory Card may feel warm when it is removed
from the camera after taking pictures. This is normal.
• Do not put labels on the Memory Card. Peeling labels
can cause the camera not to work properly.
MEMO Type M and H of xD-Picture Card
• Type M
There are two types of xD-Picture Card: standard type
and Type M (containing “M” in the model number, such
as DPC-M2GB).
FinePix A610/FinePix A805 is compatible with Type M.
• Type H
While Type H and M share the same compatibility.
• Usable USB drive
Type H cannot be used with xD-Picture Card USB
drive DPC-UD1, while Type M can.
122
Z Internal Memory
• Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
DVD-R, CD-R, CD-RW, hard disk, etc.).
• Data stored in the camera’s internal memory cannot be
guaranteed in the event that the camera is submitted for
repairs.
• When the camera is repaired, any data stored in the
camera’s internal memory is subject to checking by the
repairer.
Z Using Memory Card or Internal Memory with a PC
• When taking pictures using a Memory Card or internal
memory that has been used on a PC, reformat the
Memory Card using your camera.
• When formatting, a directory (folder) is created. Image
data is then recorded in this directory.
• Do not change or delete the directory (folder) or file
names on the Memory Card or internal memory
because this will make it impossible to use the Memory
Card or internal memory in your camera.
• Always use the camera to erase image data.
• To edit image data, copy or transfer the image data to
the PC and edit the copied or transferred data.
Warning Displays
The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed
(Lit red)
V (Blinking red)
|
Explanation
There is a strong likelihood of camera shake
because the shutter speed is slow.
Use flash photography. A tripod may be
recommended, depending on the scene and mode.
The AF (autofocus) cannot work effectively.
• If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
• Use AF lock to take the picture (➝p.34).
• Select Macro mode when taking close-up shots.
The camera cannot shoot the picture at the correct
brightness due to too bright or dark shooting
condition.
The picture can be taken, but the correct brightness
(exposure) will not be obtained.
FOCUS ERROR
Camera malfunction or fault.
• Turn the camera on again, taking care not to touch
the lens.
• Turn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
Memory Card is not inserted when transferring
images.
Insert a Memory Card.
• The Memory Card or internal memory is not
formatted.
• The Memory Card was formatted on a PC.
• The Memory Card contact area is soiled.
• Format the Memory Card or internal memory on
the camera (➝p.90).
• Format the Memory Card on the camera.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.90). If the message still
appears, replace the Memory Card.
• Contact your FUJIFILM dealer.
ZOOM ERROR
NO CARD
CARD NOT INITIALIZED
• Camera fault.
Appendices
Load new or fully charged batteries.
{
}
Remedy
The batteries are low or completely out of charge.
Continued Q
123
Warning Displays
Warning Displayed
Explanation
• The Memory Card contact area is soiled.
• The Memory Card format is incorrect.
CARD ERROR
\ MEMORY FULL
• Camera fault.
• The Memory Card is damaged.
• Inserted Memory Card is not compatible with your • Insert a compatible Memory Card that is operationcamera.
checked at FUJIFILM Corporation (➝p.22).
The internal memory or Memory Card is full.
Y MEMORY FULL
WRITE ERROR
PROTECTED CARD
Remedy
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.90). If the message still
appears, replace the Memory Card.
• Contact your FUJIFILM dealer.
Erase some images in internal memory or Memory
Card (➝p.41), or use a Memory Card that has ample
free space.
• The data could not be recorded due to a Memory • Re-insert the Memory Card or turn the camera off
Card error or a connection error between the
and then on again. If the message still appears,
Memory Card and camera.
contact your FUJIFILM dealer.
• The image cannot be recorded as it is too large to • Use a new Memory Card.
fit in the available space on the Memory Card.
• The Memory Card or internal memory is not
• Format the Memory Card or internal memory on
formatted.
the camera (➝p.90).
The SD Memory Card switch is slide to the “Lock”
side.
INTERNAL MEMORY IS The data could not be recorded or copied since the
internal memory is full.
FULL
Unlock the protection by sliding it back (➝p.23).
Erase some images from the internal memory
(➝p.41), or use a Memory Card that has ample free
space.
INSERT A NEW CARD
BUSY
The timing for recording was incorrect because the
Memory Card was formatted on a PC.
The frame number has reached 999-9999.
FRAME NO. FULL
124
Use a Memory Card that was formatted on the
camera.
A Insert a formatted Memory Card into the camera.
B Set RENEW as the FRAME NO. setting in the
SET-UP menu (➝p.87).
C Start taking pictures (The frame number starts
from “100-0001”).
D Set CONT. as the FRAME NO. setting in the
SET-UP menu.
Warning Displayed
Explanation
Remedy
• The played back file was not recorded correctly.
• The Memory Card contact area is soiled.
READ ERROR
• This file cannot be played back.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.90). If the message still
appears, replace the Memory Card.
• Camera fault.
• Contact your FUJIFILM dealer.
• An attempt was made to play back the image or the • The movie and image cannot be played back.
movie that was not recorded on this camera.
TOO MANY FRAMES
An attempt was made to show 5,000 or more image No more than 4,999 images can be shown by date
by date sorting.
sorting.
• An attempt was made to erase a protected file.
PROTECTED FRAME
\ NO IMAGE
• An attempt was made to rotate a protected file.
• Protected files cannot be erased. Remove the
protection (➝p.72).
• Protected files cannot be rotated. Remove the
protection (➝p.72).
It is impossible to copy.
` CAN NOT TRIM
(FinePix A805 only)
An attempt was made to trim a 0.3M image.
The image cannot be trimmed.
CAN NOT TRIM
(FinePix A805 only)
• An attempt was made to trim an image shot using The image cannot be trimmed.
a camera other than FinePix A805.
• The image is damaged.
DPOF FILE ERROR
Prints were specified for 1000 or more frames in the The maximum number of frames for which prints can
DPOF frame settings.
be specified on the same Memory Card is 999.
Copy the images for which you want to order prints
onto another Memory Card and then specify the
DPOF settings.
Y NO IMAGE
CAN NOT SET DPOF
Appendices
An attempt was made to transfer images from the
Memory Card or internal memory that memory was
empty.
An attempt was made to specify DPOF settings for a DPOF printing cannot be used with this image
movie or an image that is not supported by DPOF. format.
r CAN NOT SET DPOF
Continued Q
125
Warning Displays
Warning Displayed
CAN NOT ROTATE
r CAN NOT ROTATE
Explanation
The camera is not connected to a PC or printer.
• Check that the USB cable (mini-B) is connected
correctly.
• Check that your PC or printer is turned on.
• When using infrared transmission function,
transmit the image data within the camera’s or
another device's transmission range.
Displayed for PictBridge.
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Displayed for PictBridge.
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
Displayed for PictBridge.
• Refer to the user manual for the printer being used
and check whether the printer supports the JFIFJPEG or Exif-JPEG image format. If not, the printer
cannot print the images.
• Movie images cannot be printed.
• Was the image data photographed using FinePix
A610/FinePix A805?
You may not be able to print some images
photographed on other cameras.
COMMUNICATION
ERROR
PRINTER ERROR
PRINTER ERROR
RESUME?
CANNOT BE PRINTED
126
Remedy
An attempt was made to rotate a movie or an image These images cannot be rotated by image formats.
shot using a camera other than FinePix A610/FinePix
A805.
Troubleshooting
Z Getting ready
Matters
Problems
Nothing happens
when pressing
POWER.
Batteries and
power supply
Batteries run out
quickly.
Power cuts out
during operation.
Possible causes
The batteries have run out.
Solutions
Load new or fully charged batteries.
Page
19, 21,
116
The batteries are loaded backward.
Load the batteries in the correct direction.
20
The battery cover is not closed securely. Close the battery cover securely.
20
The camera and AC power adapter are
Connect the camera and AC power
93, 94,
not connected correctly.
adapter correctly.
119
Camera is used in extremely cold
Put the batteries in your pocket or another
19, 21,
conditions.
warm place to heat it and then load it into
116
the camera just before you take a picture.
The battery terminals are soiled.
Wipe the battery terminals with a clean,
21, 116
dry cloth.
Same batteries have been used for a long The batteries can no longer be recharged. 19, 21,
period.
Load new batteries.
116
The rechargeable batteries (if used) have Use the rechargeable battery discharging
function to restore the rechargeable
become deactivated, or the battery
119
batteries to full capacity.
capacity has diminished due to the
memory effect.
The batteries have run out.
Load new or fully charged batteries.
19, 21,
116
The AC power adapter plug has come out Plug the adapter back in.
93, 94,
of the power outlet.
119
Z Setting menu etc.
Matters
Possible causes
Solutions
A language other than English is selected Select ENGLISH.
in the
setting in the SET-UP
menu.
Page
29
Continued Q
Troubleshooting
LCD monitor
display
Problems
Screens are not
displayed in
English.
127
Troubleshooting
Z Shooting
Matters
Basic operations
Problems
No photograph is
taken when
pressing the
shutter button.
The LCD monitor
darkens after
taking a picture.
Focusing
Macro
128
Camera has
difficulty in
focusing on the
subject.
Cannot set the
camera to Macro
(close-up) mode.
Solutions
Page
The Memory Card or internal memory is
full.
Possible causes
Insert a new Memory Card or erase some
unnecessary frames.
22, 41
The Memory Card or internal memory is
not formatted.
Format the Memory Card or internal
memory on the camera.
84, 90
The Memory Card contact area is soiled. Wipe the Memory Card contact area with
a soft, dry cloth.
The Memory Card is damaged.
Insert a new Memory Card.
The batteries have run out.
Load new or fully charged batteries.
The Auto power off function has turned
the camera off.
Turn the camera on.
You took pictures with flash.
The LCD monitor may darken for charging
flash. Wait a short time.
22
22
19, 21,
116
25, 91
56
You took a close-up shot without selecting Select Macro mode.
Macro mode.
54
You photographed scenery with Macro
mode selected.
Cancel Macro mode.
54
You are shooting a subject that is not
suited to autofocusing (➝p.35).
Use AF/AE lock to take the picture.
The Shooting mode is set to b, m, ,,
., 8,
,
,
,
, or
.
Change the Shooting mode.
34
46, 47
Matters
Problems
Possible causes
Solutions
Page
The shutter button was pressed while the Wait until the charging is completed
flash was charging.
before pressing the shutter button.
Cannot use the
flash.
Flash
The Shooting mode is set to
, , or
.
, ,,
Photographed
images
The image is
blurred.
46, 47
The batteries have run out.
Load new or fully charged batteries.
The flash is set to C SUPPRESSED
FLASH mode.
Set to another flash mode excluding the
C SUPPRESSED FLASH mode.
55
The flash settings are restricted because
the camera settings are tailored to the
scene being shot. Change the Shooting
mode for a wider range of flash settings.
46, 47,
56
The subject is too far away.
Move to within the effective flash range
before taking the picture.
55, 56
Your finger was covering the flash.
Hold the camera correctly.
30
The lens is dirty.
Clean the lens.
115
{ appeared when taking pictures.
Check the focus on the subject and take
pictures.
32, 34,
123
| appeared when taking pictures.
It may cause camera shake. Hold the
camera steadily.
33, 123
The flash settings The Shooting mode is set to AUTO,
are restricted and
, b,
, ,, ., 8,
,
,
cannot be
,
,
, ,
,
or
.
selected.
The playback
image is dark
even though the
flash was used.
, Change the Shooting mode.
56
,
,
The picture was taken with a slow shutter This is a characteristic of CCDs and does
There is speckling
speed (long exposure) in a highnot indicate a camera fault.
on the image.
temperature environment.
19, 21,
116
–
Troubleshooting
Continued Q
129
Troubleshooting
Z Shooting
Matters
Problems
Possible causes
AC power adapter was connected or
Photographed
disconnected during turning the camera
Recording images images or movies on.
are not recorded.
Solutions
Connect or disconnect the AC power
adapter only when the camera is off.
Failing to turn the camera off first can
result in damage to the Memory Card or
malfunctions during PC connection.
Page
93, 94,
119
Z Playing back
Matters
Problems
Possible causes
The camera volume is set too low.
Playing back
movie
Frame No.
130
Page
83, 84,
89
The camera does
The microphone was blocked during
Take care not to block the microphone
not emit any
15, 81
shooting/recording.
during shooting/recording.
sound.
There is something covering the speaker Make sure that the speaker is uncovered.
15, 83
during playback.
Erasing FRAME
Some frames may be protected.
does not erase the
frame.
Erasing
Solutions
Adjust the volume.
Unprotect frames using the camera on
which the protection was first applied.
72
Erasing ALL
FRAMES does
not erase all the
frames.
CONT. in the
frame number
setting does not
function.
You opened the battery cover without
Always turn the camera off when
turning the camera off when replacing the replacing the batteries or Memory Card.
batteries or Memory Card.
Opening the battery cover without turning
the camera off may cause the frame
number memory to not function.
25
Z Connecting
Matters
Problems
Possible causes
The camera is not connected to the TV
correctly.
Connecting to TV
Page
The included video cable or A/V cable was After the movie playback mode is
stopped, connect the camera and TV
There is no image connected during movie playback.
correctly.
or sound on the
TV.
“TV” is selected as the TV input.
Set the TV input to “VIDEO”.
The TV image is
black and white.
PC does not
Connecting to PC recognize the
camera.
Connecting to
printer
Solutions
Connect the camera and TV correctly.
Cannot print with
PictBridge.
The video output setting is incorrect.
Change the setting to NTSC or PAL.
The TV volume is turned down.
Adjust the volume.
The video output setting is incorrect.
Change the setting to NTSC or PAL.
The USB cable (mini-B) is not correctly
connected to the PC or camera.
Set up the camera, and connect the USB
cable (mini-B) correctly.
93, 94
82, 93,
94
–
84, 86
–
• The USB cable (mini-B) is not correctly • Set up the camera, and connect the
connected to the printer or camera.
USB cable (mini-B) correctly.
• The printer is not turned on.
• Turn the printer on.
84, 86
105
95
Continued Q
Troubleshooting
131
Troubleshooting
Z Others
Matters
Problems
Possible causes
Camera malfunction may be caused
temporarily.
Nothing happens
when pressing the
buttons on the
camera.
The batteries have run out.
Camera operation
etc.
The camera no
longer works
correctly.
132
Camera malfunction may be caused
temporarily.
Solutions
Page
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
19, 20,
batteries or reconnect the AC power
21, 119
adapter and try again.
Load new or fully charged batteries.
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again. If you think the
camera is faulty, contact your FUJIFILM
dealer.
19, 21,
116
19, 20,
21, 119
Specifications
Z FinePix A610/FinePix A805
System
Model
Digital camera FinePix A610
Digital camera FinePix A805
Effective pixels
6.3 million pixels
8.3 million pixels
CCD
1/2.5-inch Super CCD HR
1/1.6-inch Super CCD HR
Storage media
Internal memory (approx. 10 MB)/xD-Picture Card (16/32/64/128/256/512 MB/1 GB/2 GB)
/SD Memory Card (FUJIFILM recommendation (➝p.22))
File format
Still image: DCF-compliant
Compressed: Exif ver.2.2 JPEG,
DPOF-compatible
*Design rule for Camera File System
compliant/DPOF compatible
Movie: AVI format, Motion JPEG
Number of recorded pixels Still image:
2848 × 2136 pixels/3024 × 2016 pixels/
2048 × 1536 pixels/1600 × 1200 pixels/
640 × 480 pixels (5/%/3/2/`)
Still image: DCF-compliant
Compressed: Exif ver.2.2 JPEG,
DPOF-compatible
*Design rule for Camera File System
compliant/DPOF compatible
Movie: AVI format, Motion JPEG
Audio: Monaural sound
Still image:
3296 × 2472 pixels/3504 × 2336 pixels/
2304 × 1728 pixels/1600 × 1200 pixels/
640 × 480 pixels (i/%/4/2/`)
File size
See the table on the p.139
See the table on the p.138
Lens
Fujinon 3× optical zoom lens
F3.0-F5.4
Fujinon 3× optical zoom lens
F2.8-F5.2
Focal length
f=8.0 mm-24.0 mm
f=6.6 mm-19.8 mm
(Equivalent to approx. 39 mm-117 mm on a 35 mm (Equivalent to approx. 36 mm-108 mm on a 35 mm
camera)
camera)
Continued Q
133
Specifications
Z FinePix A610/FinePix A805
System
Digital camera FinePix A610
134
Digital camera FinePix A805
Digital zoom
Approx. 6.2× (3× optical zoom lens is used together: Approx. 6.9× (3× optical zoom lens is used together:
Max. zoom scale: approx. 18.6×)
Max. zoom scale: approx. 20.7×)
Aperture (Wide-angle)
F3.0/F8
Focal range
Normal: approx. 60 cm (2.0 ft.) to infinity
Normal: approx. 50 cm (1.6 ft.) to infinity
Macro: wide-angle: approx. 10 cm (3.9 in.) to 80 cm Macro: wide-angle: approx. 10 cm (3.9 in.) to 80 cm
(2.6 ft.)
(2.6 ft.)
telephoto: approx. 35 cm (1.1 ft.) to 80 cm
telephoto: approx. 35 cm (1.1 ft.) to 80 cm
(2.6 ft.)
(2.6 ft.)
Sensitivity
AUTO/Equivalent to ISO 100/200/400 (Standard
output sensitivity)
Photometry
TTL 256-zones metering
Exposure control
Program AE
Scene position
(BABY MODE)/m (PORTRAIT)/
(BABY MODE)/m (PORTRAIT)/
, (LANDSCAPE)/. (SPORT)/8 (NIGHT)/
, (LANDSCAPE)/. (SPORT)/8 (NIGHT)/
(NATURAL LIGHT)/
(BEACH)/
(SNOW)/
(BEACH)/
(SNOW)/
(FIREWORKS)/
(FIREWORKS)/
(SUNSET)/
(SUNSET)/ (UNDERWATER)/ (FLOWER)/
(UNDERWATER)/ (FLOWER)/ (PARTY)/
(PARTY)/
(MUSEUM)/
(TEXT)
(MUSEUM)/
(TEXT)
F2.8/F8
AUTO/Equivalent to ISO 100/200/400/800
(Standard output sensitivity)
Exposure compensation
–2 EV to +2 EV in 1/3 EV-step increments (s)
Shutter speed
4 sec. to 1/1500 sec. (depend on Exposure mode) 4 sec. to 1/1600 sec. (depend on Exposure mode)
Focus
Mode: Single-AF
AF system: TTL contrast-type
AF frame selection: AF (CENTER)
Z FinePix A610/FinePix A805
System
Digital camera FinePix A610
Digital camera FinePix A805
White balance
Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight), Fluorescent (Warm White),
Fluorescent (Cool White), Incandescent)
Self-timer
Approx. 2 sec./10 sec.
Flash type
Auto flash
Auto flash
Effective range: ( : AUTO)
Effective range: ( : AUTO)
Wide-angle: approx. 60 cm-3.5 m (2.0 ft.-11.5 ft.) Wide-angle: approx. 50 cm-3.8 m (1.6 ft.-12.5 ft.)
Telephoto: approx. 60 cm-1.9 m (2.0 ft.-6.2 ft.)
Telephoto: approx. 60 cm-2.0 m (2.0 ft.-6.6 ft.)
Macro: approx. 30 cm-80 cm (1.0 ft.-2.6 ft.)
Macro: approx. 30 cm-80 cm (1.0 ft.-2.6 ft.)
Flash mode
Auto, Red-eye Reduction, Forced Flash, Suppressed Flash, Slow Synchro, Red-eye Reduction + Slow Synchro
LCD monitor
2.5 inches, Aspect ratio: 4:3; approx. 115,000 pixels Amorphous silicon TFT color LCD monitor, Approx.
100% coverage
Movie
320 × 240 pixels ($)
(30 frames per second no sound)
A series of continuous image can be recorded
depending on the available space on a Memory
Card or internal memory. Zoom cannot be used
during movie recording.
Photography functions
Best framing, Frame NO. memory
Playback functions
Slide show, Multi-frame playback, Sorting by date, Trimming, Slide show, Multi-frame playback,
Image rotate
Sorting by date, Image rotate
Other functions
PictBridge, Exif print, Language (
, English, Francais, Deutsch, Español, Italiano,
,
,
,
, Português, Nederlands,
,
, Magyar, Polski, Svenska), Time difference,
Discharging rechargeable batteries
320 × 240 pixels ($)
(30 frames per second with monaural sound)
A series of continuous image can be recorded
depending on the available space on a Memory
Card or internal memory. Zoom cannot be used
during movie recording.
Continued Q
135
Specifications
Z FinePix A610/FinePix A805
Input/Output Terminal
A/V OUT (Audio/Visual
output)
FinePix A610: NTSC/PAL-type (no sound)
FinePix A805: NTSC/PAL-type (with monaural sound)
Digital input/output
USB 2.0 High-Speed, PTP (Picture Transfer Protocol)/MTP (Media Transfer Protocol)
DC input socket
AC Power Adapter AC-3VX (sold separately)
Power Supply and Others
Power supply
Use one of the following:
• 2×AA-size alkaline batteries
• 2×AA-size Ni-MH (Nickel-Metal Hydride) batteries
• AC power adapter AC-3VX (sold separately)
Guide to the number of
Battery Type
available frames for battery
operation
Alkaline batteries
Ni-MH batteries 2500 mAh
Number of frames
Approx. 100 frames
Approx. 350 frames
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using Ni-MH batteries, use the batteries supplied with the camera. The storage media should be
xD-Picture Card.
Pictures should be taken at a temperature of +23°C (+73°F), with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original position
every 30 seconds, the flash used at full power every second shot and the camera turned off and then on
again once every 10 shots.
• Note: Because the number of available shots varies depending on the capacity of alkaline batteries or
the level of charge in Ni-MH batteries, the figures shown here for the number of available shots
using batteries are not guaranteed.
The number of available shots will also decline at low temperatures.
136
Power Supply and Others
Camera dimensions
(W/H/D)
Fine Pix A610/Fine Pix A805:
97.5 mm × 61.9 mm × 31.0 mm/3.8 in. × 2.4 in. × 1.2 in. (not including accessories and attachments)
Camera mass (weight)
Fine Pix A610:
Approx. 145 g/5.1 oz. (not including accessories, batteries and Memory Card)
FinePix A805:
Approx. 151 g/5.3 oz. (not including accessories, batteries and Memory Card)
Weight for photography
Fine Pix A610:
Approx. 193 g/6.8 oz. (including batteries and Memory Card)
FinePix A805:
Approx. 211 g/7.4 oz. (including batteries and Memory Card)
Operating Conditions
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Continued Q
137
Specifications
Z Standard number of available frames/recording time per xD-Picture Card , SD Memory Card and internal memory
(FinePix A805)
The number of available frames, recording time or file size varies slightly depending on the subjects photographed. Note also
that the divergence between standard number of frames and the actual number of frames is greater for Memory Cards with
higher capacities.
Quality setting
Number of recorded
pixels
iN
3296 × 2472
%
4
2
`
$
(30 fps)
3504 × 2336
2304 × 1728
1600 × 1200
640 × 480
320 × 240
4.0 MB
2.0 MB
2.0 MB
980 KB
630 KB
130 KB
–
Internal memory
(approx.10 MB)
2
4
4
9
15
75
16 MB
3
7
7
15
25
122
27 sec.
32 MB
7
15
15
31
50
247
54 sec.
64 MB
15
31
31
64
101
497
110 sec.
128 MB
31
63
63
128
204
997
221 sec.
256 MB
63
126
126
257
409
1997
7.4 min.
512 MB
127
253
253
515
818
3993
14.8 min.
1 GB
255
507
507
1031
1639
7995
29.6 min.
2 GB
511
1015
1015
2063
3198
15992
59.2 min.
512 MB
123
245
245
498
793
3867
14.3 min.
1 GB
247
491
491
999
1588
7745
28.7 min.
2 GB
495
983
983
1999
3100
15501
57.4 min.
Image data size
xD-Picture Card
SD Memory Card
138
iF
16 sec.
Z Standard number of available frames/recording time per xD-Picture Card , SD Memory Card and internal memory
(FinePix A610)
The number of available frames, recording time or file size varies slightly depending on the subjects photographed. Note also
that the divergence between standard number of frames and the actual number of frames is greater for Memory Cards with
higher capacities.
Quality setting
Number of recorded
pixels
5F
5N
3
2
`
$
(30 fps)
3024 × 2016
2048 × 1536
1600 × 1200
640 × 480
320 × 240
3.0 MB
1.5 MB
1.5 MB
780 KB
630 KB
130 KB
–
2
6
6
12
15
75
16 sec.
16 MB
5
10
10
19
25
122
27 sec.
32 MB
10
20
20
40
50
247
55 sec.
64 MB
21
42
42
81
101
497
110 sec.
128 MB
42
84
84
162
204
997
222 sec.
256 MB
85
169
169
325
409
1997
7.4 min.
512 MB
170
339
339
651
818
3993
14.9 min.
1 GB
341
680
680
1305
1639
7995
29.7 min.
2 GB
680
1360
1360
2558
3198
15992
59.5 min.
512 MB
165
328
328
631
793
3867
14.4 min.
1 GB
331
658
658
1264
1588
7745
28.8 min.
2 GB
659
1319
1319
2480
3100
15501
57.7 min.
Image data size
Internal memory
(approx.10 MB)
2848 × 2136
%
xD-Picture Card
SD Memory Card
Continued Q
139
Specifications
If you shoot using the xD-Picture Cards with model numbers containing “M” such as DPC-M2GB, movie recording time may be
reduced if you repeatedly record and erase (frame erase) image files. In such a case, erase all frames or format the xD-Picture Card
before use. Back up important frames (files) onto your PC or another media.
* These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this Owner’s Manual.
* The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright
points and anomalous colors (particularly around text) may appear on the monitor. These are normal display characteristics
and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.
* The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static electricity,
line noise, etc.).
* Due to the nature of the lens, the edges of images may appear distorted. This is normal.
140
Memo
141
Explanation of Terms
Deactivated batteries
Leaving an Ni-MH battery unused in storage for a long period may cause a rise in the level of substances that inhibit current
flow inside the battery and result in a dormant battery. A battery in this state is referred to as deactivated.
Because current flow is inhibited in a deactivated Ni-MH battery, the battery’s original level of performance cannot be achieved.
EV
A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the film
or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes, a
digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the EV decreases
by 1.
Frame rate (fps)
The frame rate refers to the number of images (frames) that are photographed or played back per second. For example, when
10 frames are continuously photographed in a 1-second interval, the frame rate is expressed as 10 fps.
For reference, TV images are displayed at 30 fps (NTSC).
JPEG
Joint Photographic Experts Group
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss of quality in
the decompressed (restored) image.
Memory effect
If an Ni-MH battery is repeatedly charged without first being fully discharged, its performance may drop below its original level.
This is referred to as the “memory effect”.
Motion JPEG
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file are recorded
in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
Smear
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light source, such as
the sun or reflected sunlight, in the photography screen.
White Balance
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, devices
such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of the ambient light
around the subject. This adjustment is called matching the white balance.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.
142
FUJIFILM Digital Camera Worldwide Network
If you have technical questions or if you need repair service, ask the following local distributor.
Please present the warranty card and your purchase receipt when you ask for repairs. Refer to the warranty card for conditions of the warranty.
There is a case that repair and Technical support cannot be accepted for some models which your local distributor does not deal with.
These lists are subject to change without notice.
NORTH AMERICA
Canada
U.S.A.
Hawaii
FUJIFILM Canada Inc.
Technical support
Repair service
FUJIFILM U.S.A., Inc.
Technical support
Repair service
FUJIFILM Hawaii, Inc.
Technical support &
Repair service
CENTRAL & SOUTH AMERICA
Argentina
Imagen e informacion S.A.
Technical support &
Repair service
Bolivia
Reifschneider Bolivia Ltda.
Technical support &
Repair service
Brazil
FUJIFILM do Brasil Ltda.
Technical support &
Repair service
Chile
Reifschneider SA
Technical support &
Repair service
Colombia
Animex de Colombia Ltda.
Technical support &
Repair service
Ecuador
Espacri Cia Ltda
Technical support &
Repair service
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-866-818-FUJI (3854) http://www.fujihelp.ca
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-800-263-5018 FAX 1-905-755-2993 http://www.fujihelp.ca
1100 King George Post Rd., Edison, NJ 08837
TEL 800-800-3854 FAX 732-857-3487 digitalinfo@fujifilm.com
1100 King George Post Rd., Edison, NJ 08837
TEL 732-857-3000 FAX 732-857-3471 njcamerarepair@fujifilm.com
94-468 Akoki Street, Waipahu, HI. 96797
TEL 1-808-677-3854, ext. 209 FAX 1-808-677-1443
kurt_kmett@fujifilmhawaii.com
Fondo de la Legua 936 San Isidro Pcia. de Buenos Aires
TEL +54-11-4836-1000 FAX +54-11-4836-1144
servtec@imageneinformacion.com.ar
Calle H N.° 5 - Equipetrol Norte - Santa Cruz
TEL +591 33 44 1129 FAX +591 33 45 2919 gciagral@bibosi.scz.entelnet.bo
Av. Vereador José Diniz, 3400 - Campo Belo, Sào Paulo/SP
TEL 0800-12-8600 FAX +55 11 5091-4150 camarasdigitais@fujifilm.com.br
Av. El Conquistador del Monte 5024, Huechuraba, Santiago, Chile
TEL 02-4431500 FAX 02-4431596 ceciliacalvo@reifschneider.cl
Calle 44 N.° 13-43 Piso 2 Apartado 18001 - Bogotá
TEL +57 1 338-0299 FAX +57 1 288-2208 animex@etb.net.co
Bolivar 5-69 y Hermano Miguel
TEL 593-72-835526 FAX 593-72-833157
143
FUJIFILM Digital Camera Worldwide Network
Ecuador
Importaciones Espacri Cia. Ltda.
Technical support &
Repair service
Simón Bolivar 5-69 y Hno. Miguel - Cuenca
TEL +593 783 5526 FAX +593 783 3157 portiz@fujifilm.com.ec
Mexico
Fujifilm de Mexico, S.A. de C.V.
Technical support
Repair service
Av. Ejercito Nacional 351, Col. Granada 11520 Mexico, D.F.
TEL (52-55) 5263-5566 / 68 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Paraguay
Errece S.R.L.
Technical support &
Repair service
Peru
Procesos de Color S.A.
Technical support &
Repair service
Pablo Bermudez 111 Apartado 3794 - Esq. Arequipa - Lima 11
TEL +51 14 33 5563 FAX +51 14 33 7177 jalvarado@fujifilm.com.pe
Uruguay
Fotocamara S.R.L.
Technical support &
Repair service
Cuareim 1439, montevideo, Uruguay
TEL +598-2-9002004 FAX +598-2-9008430 fotocam@adinet.com.uy
Uruguay
Kiel S.A.
Technical support &
Repair service
Maldonado 1787 Montevideo- Uruguay
TEL (05982) 419 4542 FAX (05982) 412 0046 kiel@fujifilm.com.uy
Venezuela
C. Hellmund & Cia Sa
Technical support &
Repair service
Av. Ppal Diego Cisneros Caracas Venezuela Edf Oficentro
TEL 0212-2022300 FAX 0212-2399796 hellmund@hellmund.com
Fuji Film Oesterreich
Technical support &
Repair service
Traviatagasse/Pfarrgasse, 1230 Vienna, Austria
TEL 0043 1 6162606/51 or 52 FAX 0043 1 6162606/58
kamera.service@fujifilm.at
Belgium
Belgian Fuji Agency
Technical support &
Repair service
20, Avenue Lavoisier, Wavre, 1300, Belgium
TEL 3210242090 FAX 3210238562 info@fuji.be
Croatia
I&I d.o.o.
Technical support
Repair service
Hondlova 2, Zagreb, Croatia
TEL 38512319060 FAX 2310240 dsaravanja@fujifilm.hr
EUROPE
Austria
Cyprus
144
Av. Presidente Juarez 2007, Col. Tepetlacalco, 54090 Tlalnepantla, Edo. de
Mexico
TEL (52-55) 5263-5500 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Edificio Unitas 15 de Agosto 1035, Asunción
TEL +595 21 444256 FAX +595 21 444651 jmarbulo@fujifilm.com.py
PMS IMAGING LTD
Technical support &
Repair service
Hondlova 2, Zagreb, Croatia
TEL 38512316228 FAX 2310240 info@fujifilm.hr
11, Dighenis Akritas Avenue, P.O.BOX 22315, 1586 Nicosia
TEL 35722746746 FAX 35722438209 mariosashiotis@fujifilm.com.cy
Cyprus
Doros Neophytou
CAMERA REPAIRS
Technical support &
Repair service
28B, Agiou Demetriou, Acropoli, Nicosia
TEL 35722314719 FAX 35722515562 dorosn@logosnet.cy.net
Czech Republic
Fujifilm Cz., s.r.o.
Technical support
U nakladoveho nadrazi 2/1949, 130 00 Praha 3
TEL 00420 234 703 411 FAX 00420 234 703 489 fricman@fujifilm.cz
Czech Republic
AWH servis
Repair service
Milesovska 1, 130 00 Praha 3, Czech republic
TEL 00420 222 721 525 FAX 00420 222 720 122 awh@awh.cz
Denmark
Fujifilm Denmark A/S
Technical support &
Repair service
Stubbeled 2, 2950 Vedbæk Denmark
TEL 0045 45662244 FAX 0045 45662214 fujifilm@fujifilm.dk
Finland
Fuji Finland Oy
Technical support &
Repair service
Martinkyläntie 41, 01720 Vantaa, Finland
TEL +358 9 825951 FAX +358 9 870 3818 fuji@fuji.fi
France
FUJIFILM France
Technical support &
Repair service
2, Avenue Franklin, 78186 Saint-Quentin en Yvelines, France
FAX 33 1 01 30 58 58 65 direction.technique@fujifilm.fr
Germany
FUJIFILM Europe GmbH
Technical support &
Repair service
Greece
FUJIFILM HELLAS S.A.
Technical support &
Repair service
Heesenstr. 70, 40549 Düsseldorf
International call TEL +49 211 50890 FAX +49 211 5089668 service@fujifilm.de
National call* TEL 0180 5898980 FAX 0180 5898982
*12 Cent/Min aus dem deutschen Festnetz
1, Ihous & Ag. Anargiron str., 175 64 P.Phaliro, Athens, Greece
TEL 0030 210 9404100 FAX 0030 210 9404397 fujifilm@fujifilm.gr
Hungary
Fujifilm Hungary Ltd.
Technical support
Vaci ut 19. Budapest, 1134, Hungary
TEL 3612389410 FAX 3612389401 fujifilm@fujifilm.hu
Iceland
Icephoto (Ljosmyndavorur)
Technical support &
Repair service
Skipholt 31, 105 Reykjavik, Iceland
TEL 354 568 0450 FAX 354 568 0455 framkollun@fujifilm.is
Italy
FujiFilm Italia S.p.A.
Technical support
Repair service
Via Dell’Unione Europea, 4 - 20097 San Donato Milanese (MI), Italy
TEL 039-02895821 FAX 039-0289582912 info@fujifilm.it
Lithuania
Fujifilm Lithuania
Technical support &
Repair service
Fujifilm On Line - Call center
TEL 039-026695272 info@fujifilm.it
Gerosios Vilties str. 38, LT-03143 Vilnius, Lithuania
TEL 370-5-2130121 FAX 3705-5-2134066 info@fujifilm.lt
145
FUJIFILM Digital Camera Worldwide Network
Malta
Ciancio (1913) Co.Ltd.
Technical support &
Repair service
Fuji Tech Centre, Ciancio House, Cannon Road, Qormi, QRM05
TEL 0356-21-480500 FAX 0356-21-488328 info@fujifilm.com.mt
Netherlands
Fujifilm Nederland BV
Technical support
Repair service
Hoogstraat 39, 3011 PE, Rotterdam, The Netherlands
TEL 010-2812345 FAX 010-2812334 fuji@fujifilm.nl
Norway
Fujifilm Norge AS
Technical support
Repair service
Poland
Fujifilm Polska Distribution Sp. z
o.o.
Technical support
Repair service
Portugal
Fujifilm Portugal, Lda
Technical support
Repair service
Poland, Muszkieterow 15, 02-273 Warszawa
TEL +48-22-886-94-40 FAX +48-22-886-94-42 serwis@fujifilm.pl
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 226194213 finepix@fujifilm.pt
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 225194662 cameras@fujifilm.pt
112, Calea Dorobanti street, 4 flat, 1sector, Bucharest, Romania
TEL 4021-230-09-82 FAX 4021-230-09-82 cts_tirla@hotmail.com
Romania
CTS-Cardinal Top Systems Ltd
Technical support &
Repair service
Russia
ZAO “Fujifilm RU”
Technical support
Bld. 1, 10, Rozanova str., Moscow, 123007, Russia
TEL +7-095-956-9858 FAX +7-095-230-6217 info@fujifilm.ru
Repair service
18, Shelepikhinskaya Naberezhnaya str., Moscow, 123290, Russia
TEL +7-095-797-3434 FAX +7-095-797-3434
Pribylinska 2, 831 04 Bratislava, Slovakia
TEL 00421 2 44 888 077 FAX 00421 2 44 889 300 fujifilm@fujifilm.sk
Slovakia
Spain
146
Hoevenseweg 43, 4877 LA, Etten-Leur, The Netherlands
TEL 010-2812345 FAX 076-7502641 reparatie@fujifilm.nl
Lilleakerveien 10, 0283 Oslo, Norway
TEL 0047-22736000 FAX 0047-22736020 http://www.fujifilm.no/
mailto:post@fujifilm.no
Liaveien 1, 5132 Nyborg, Norway
TEL 0047-55393880 FAX 0047-55195201 http://www.camera.no/
mailto:service@camera.no
Poland Al..Jerozolimskie 178; 02-486 Warszawa
TEL +48-22-517-66-00 FAX +48-22-517-66-02 fujifilm@fujifilm.pl
Fujifilm Slovakia
Technical support
Repair service
Fujifilm España S.A.
Technical support
Repair service
FIS Tatracentrum, Hodzovo nam. 4 - Tatracentrum, 811 06 Bratislava, Slovakia
TEL 00421 2 54 647 347 fis.tatracentrum@stonline.sk
Aragón 180, 08011 Barcelona (España)
TEL 902012535 FAX 934515900 / 933230330 info@fujifilm.es
Aragón 180, 08011 Barcelona (España)
TEL 934511515 FAX 934515900 / 933230330 tallersat@fujifilm.es
Sweden
Fujifilm Sverige AB
Technical support
Repair service
Switzerland /
Lichtenstein
Fujifilm (Switzerland) AG
Technical support &
Repair service
Turkey
Fujifilm Turkiye Sinfo A.S.
Technical support
Repair service
U.K.
Ukraine
MIDDLE EAST
Iran
Israel
FUJIFILM UK Ltd.
Technical support
Repair service
Image Ukraine CJSC
Technical support &
Repair service
Sveavägen 167 104 35 Stockholm
TEL 46 8 506 141 70 FAX 46 8 506 142 09 kamera@fujifilm.se
Sveavägen 167 104 35 Stockholm
TEL 46 8 506 513 54 FAX 46 8 506513 54 kameraverkstaden@fujifilm.se
Niederhaslistrasse 12, 8157 Dietlikon, Switzerland
TEL +41 44 855 5154 FAX +41 44 855 5329 RepairCenter@fujifilm.ch
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5009 csarp@fujifilm.com.tr
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5010 servis@fujifilm.com.tr
St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 424 5383 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 421 8388 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
12, Kontraktova ploshcha, Kyiv 04070, Ukraine
TEL +380-44-4909075 FAX +380-44-4909076 d@fujifilm.ua
Tehran Fuka Co.
Technical support &
Repair service
229,“Fuji” Bldg., Mirdamad Blvd., Tehran 19189, Iran
TEL (+98-21)2254810-19 FAX (+98-21)2221002 fuka@neda.net
Shimone Group Ltd.
Technical support
Repair service
Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 digital@fujifilm.co.il
Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 FAX 972 3 9250699 khaim@shimone.com
Al- Abdali, Amman / Jordan
TEL 009626-4646387 FAX 009626-4647542 gstores@go.com.jo
Jordan
Grand Stores
Technical support &
Repair service
Qatar
Techno Blue
Technical support
Blue Salon Bldg, 3rd Floor, Suhaim bin Hamad st, Al- Saad, Doha
TEL 00974 44 66 175 FAX 00974 44 79 053 prabu@techno-blue.com
Saudi Arabia
Emam Distribution Co. Ltd.
Technical support
P.O. Box 1716, Jeddah 21441, Saudi Arabia
TEL 96626978756 FAX 96626917036 service@fujifilm.com.sa
147
FUJIFILM Digital Camera Worldwide Network
Syria
Al-Shahbandar P.O. Box:31180 Damascus SYRIA
TEL + 963 11 2218049 FAX + 963 11 44673456 f.t.c@Net.SY
Al-cheikh Taha P.O. Box: 6171 Aleppo SYRIA
TEL + 963 21 4641903 FAX + 963 21 4641907 filmtradin@Net.SY
P. O. Box 2144, Saleh Bin Lahej Building, Al Garhoud, Deira, Dubai
TEL + 971-4-2823700 FAX + 971-4-2828382 photography@grandstores.ae
U.A.E.
Grand Stores
Technical support &
Repair service
Yemen
Al-Haidary Trading
Technical support
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503980 FAX 00967-1-503983
Foto Express Egypt
Technical support &
Repair service
426 Pyramids St., Giza, Egypt
TEL (202) 7762062 FAX (202) 7760169 fotoegypt@access.com.eg
Fuji Kenya Ltd
Repair service
P.O.Box 41669-00100, Fuji Plaza, Chiromo Road, Nairobi, Kenya.
TEL (254-20)4446265-8 FAX (254-20)4448515 / 7 info@fujifilm.co.ke
FUJIFILM Australia Pty Ltd
Technical support &
Repair service
Locked Bag 5100, Brookvale, NSW, 2100
TEL 1800 226 355 FAX +61 (2) 9466 2854 digital@fujifilm.com.au
Fiji
Brijlal & Co. Ltd
Technical support &
Repair service
70-72 Cumming Street,Suva,Fiji
TEL (679)3304133 FAX (679)3302777 kapadia@connect.com.fj
New Caledonia
Phocidis SARL
Technical support &
Repair service
58, rue Higginson - B.P.661 - 98845
TEL (00 687) 25-46-35 FAX (00 687) 28-66-70 phocidis@phocidis.nc
New Zealand
Fujifilm NZ Ltd
Technical support &
Repair service
Cnr William Pickering & Bush Road Albany, Auckland
TEL +64-9-4140400 FAX +64-9-4140410 glenn.beaumont@fujifilm.co.nz
Papua New Guinea
Oceania PNG Limited
Technical support
Section 15, Allotment 1, Reke St, Boroko NCD. PNG. Mail: PO Box 2167, Boroko
NCD. PNG. TEL +675 3256411 FAX +675 3250311 oceania@daltron.com.pg
Fuji Photo Products Co., Ltd.
Technical support &
Repair service
8/F.,TSUEN WAN IND. CENTRE, 220 TEXACO RD., TSUEN WAN, HONG KONG
TEL (852)2406 3287 FAX (852)2408 3130 rsd@chinahkphoto.com.hk
AFRICA
Egypt
Kenya
OCEANIA
Australia
ASIA
Hong Kong
148
Film Trading Company
Technical support
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503977 FAX 00967-1-503983
Indonesia
PT Modern Photo Tbk
Technical support &
Repair service
Jl.Matraman Raya 12, Jakarta Timur 13150
TEL +62 021 2801000 FAX +62 021 8581620+62 021 2801012
assd_kmr@modernphoto.co.id
Malaysia
FUJIFILM (Malaysia)
Sdn. Bhd.
Technical support
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 digital@fujifilm.com.my
Philippines
YKL Development & Trdg. Corp.
Technical support
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 technical@fujifilm.com.my
24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 digital@yklcolor.com
24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 tech_services@yklcolor.com
10 New Industrial Road Fujifilm Building Singapore 536201
TEL 65-6380 5557 FAX 65-6281 3594 service@fujifilm.com.sg
Singapore
FUJIFILM (Singapore) Pte Ltd
Technical support &
Repair service
South Korea
Korea Fujifilm Co., Ltd.
Technical support
30-1, Mukjeung-dong, Jung-gu, Seoul, Korea
TEL +82-2-3282-7363 FAX +82-2-2269-7435 photo@fujifilm.co.kr
South Korea
Yonsan AS Center (Fujidigital)
Repair service
#301, 3F, Jeonjaland, 16-9, Hangangro3-ga, Yongsan-gu, Seoul, Korea
TEL +82-2-701-1472 FAX +82-2-718-1331 1bowl@hanmail.net
South Korea
Kangnam AS Center
(Digitalgallery)
Repair service
2F, Hyeongin Tower, 23-2, Bangyi-dong, Songpa-gu, Seoul, Korea
TEL +82-2-2203-1472 FAX +82-2-418-5572 nurijili@hanmail.net
South Korea
Busan AS Center (Digital-Sewon) 241-4, Bujeon-dong, Busanjin-gu, Busan, Korea
TEL +82-51-806-1472 FAX +82-51-817-0083 merahan@yahoo.co.kr
Repair service
No. 38, Min-Chuan E. Rd. Sec. 6, Taipei (114), Taiwan, R.O.C.
Hung Chong Corp.
TEL 886-2-6602-8988 FAX 886-2-2791-8647 dah@mail.hungchong.com.tw
Technical support &
Repair service
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
FUJIFILM (Thailand) Ltd.
TEL +662-2730029 ext. 755 FAX +662-2730239 supaleark@fujifilm.co.th
Technical support
Taiwan
Thailand
Repair service
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext.761,762 FAX +662-2730239 warin@fujifilm.co.th
149
Memo
150
Safety Notes
• Make sure that you use your FinePix A610/FinePix
A805 camera correctly. Read these Safety Notes and
your Owner’s Manual carefully before use.
• After reading these Safety Notes, store them in a safe
place.
About the Icons
The icons shown below are used in this document to
indicate the severity of the injury or damage that can
result if the information indicated by the icon is ignored
and the product is used incorrectly as a result.
WARNING
This icon indicates that death
or serious injury can result if
the information is ignored.
CAUTION
This icon indicates that
personal injury or material
damage can result if the
information is ignored.
The icons shown below are used to indicate the nature of
the information which is to be observed.
WARNING
If a problem arises, turn the camera off,
remove the batteries, disconnect and
unplug the AC power adapter.
Continued use of the camera when it is
emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can
cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not allow water or foreign objects to
enter the camera.
If water or foreign objects get inside the
camera, turn the camera off, remove the
batteries and disconnect and unplug the
AC power adapter.
Continued use of the camera can cause a
fire or electric shock.
• Contact your FUJIFILM dealer.
Do not use the camera in the bathroom
or shower.
This can cause a fire or electric shock.
Do not use in the
bathroom or
shower.
Triangular icons tell you that this information requires
attention (“important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an
action that must be performed (“Required”).
Unplug from
power socket.
Never attempt to change or take apart
the camera. (Never open the casing.)
Do not use the camera when it has been
dropped or the casing is damaged.
This can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not
disassemble.
151
Safety Notes
WARNING
Do not change, heat or unduly twist or
pull the connection cord and do not
place heavy objects on the connection
cord.
These actions could damage the cord and
cause a fire or electric shock.
• If the cord is damaged, contact your
FUJIFILM dealer.
Do not place the camera on an unstable
surface.
This can cause the camera to fall or tip
over and cause injury.
Never attempt to take pictures while in
motion.
Do not use the camera while you are
walking or driving a vehicle.
This can result in you falling down or being
involved in a traffic accident.
Do not touch any metal parts of the
camera during a thunderstorm.
This can cause an electric shock due to
induced current from the lightning
discharge.
Do not use the batteries except as
specified.
Load the batteries with the + and ,
marks.
152
WARNING
Do not heat, change or take apart the
batteries.
Do not drop or subject the batteries to
impacts.
Do not attempt to recharge lithium or
alkaline batteries.
Do not store the batteries with metallic
products.
Do not use chargers other than the
specified model to charge the batteries.
Any of these actions can cause the
batteries to burst or leak and cause fire or
injury as a result.
Use only the batteries or AC power
adapters specified for use with this
camera.
Do not use voltages other than the
power supply voltage shown.
The use of other power sources can cause
a fire.
If the battery leaks and fluid gets in
contact with your eyes, skin or
clothing. Flush the affected area with
clean water and seek medical attention
or call an emergency number right
away.
Do not use the charger to charge
batteries other than those specified
here.
The charger is designed for Fujifilm HR-AA
Ni-MH batteries. Using the charger to
charge conventional batteries or other
types of rechargeable batteries can cause
the battery to leak fluid, overheat or burst.
WARNING
When discarding or storing batteries,
cover the battery terminals with
insulation tape.
Contact with other metallic objects or
batteries could cause the batteries to ignite
or burst.
Keep Memory Cards out of the reach of
small children.
Because Memory Cards are small, they
can be swallowed by children. Be sure to
store Memory Cards out of the reach of
small children. If a child swallows a
Memory Card, seek medical attention or
call an emergency number.
CAUTION
Do not use this camera in locations
affected by oil fumes, steam, humidity
or dust.
This can cause a fire or electric shock.
Do not leave this camera in places
subject to extremely high
temperatures.
Do not leave the camera in locations such
as a sealed vehicle or in direct sunlight.
This can cause a fire.
Keep out of the reach of small children.
This product could cause injury in the
hands of a child.
Do not place heavy objects on the
camera.
This can cause the heavy object to tip over
or fall and cause injury.
Do not move the camera while the AC
power adapter is still connected.
Do not pull on the connection cord to
disconnect the AC power adapter.
This can damage the power cord or cables
and cause a fire or electric shock.
Do not use the AC power adapter when
the plug is damaged or the plug socket
connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the
AC power adapter in a cloth or blanket.
This can cause heat to build up and distort
the casing or cause a fire.
153
Safety Notes
CAUTION
When you are cleaning the camera or
you do not plan to use the camera for
an extended period, remove the
batteries and disconnect and unplug
the AC power adapter.
Failure to do so can cause a fire or electric
shock.
When charging ends, unplug the
charger from the power socket.
Leaving the charger plugged into the
power socket can cause a fire.
Using a flash too close to a person’s
eyes may temporarily affect the
eyesight.
Take particular care when photographing
infants and young children.
When a Memory Card is removed, the
card could come out of the slot too
quickly. Use your finger to hold it and
gently release the card.
Request regular internal testing and
cleaning for your camera.
Build-up of dust in your camera can cause
a fire or electric shock.
• Contact your FUJIFILM dealer to
request internal cleaning every 2 years.
• Please note this is not a free of charge
service.
154
Memo
155
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital/
Printed in China
Y-709106-PY
Download PDF

advertising