FujiFilm F45fd Digital Camera User Manual

Getting Ready
Using the Camera
Advanced Features
• Photography
• Playback
• Movie
Settings
Camera Connection
OWNER’S MANUAL
This manual will show you how to use
your FUJIFILM DIGITAL CAMERA
FinePix F40fd / FinePix F45fd / FinePix
F47fd correctly.
Please follow the instructions carefully.
Software
Installation
Appendices
Troubleshooting
BL00599-201(1)
Warning
To prevent fire or shock hazard, do not expose the unit to rain
or moisture.
For customers in Canada
For customers in the U.S.A.
This Class B digital apparatus complies with Canadian ICES-003.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
CAUTION
Please read the Safety Notes (➝p.171) and make
sure you understand them before using the camera.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for
help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void the user’s authority to operate
the equipment.
Notes on the Grant:
To comply with Part 15 of the FCC Rules, this product must be used
with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC
supply cord.
2
Perchlorate Material-special handling may apply,
See http://www.dtsc.ca.gov/hazardouswaste/
perchlorate.
IMPORTANT
NOTICE
BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM
Corporation, PLEASE READ THIS END USER LICENSE AGREEMENT
CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,
SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.
BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE
BOUND BY THIS AGREEMENT.
End User License Agreement
This End User License Agreement (“Agreement”) is an agreement between
FUJIFILM Corporation (“FUJIFILM”) and you, which sets forth the terms
and conditions of the license granted for you to use the software provided
by FUJIFILM.
The CD-ROM contains third party software. In case a separate agreement
is provided by a third party supplier for its software, the provisions of such
separate agreement shall apply to the use of such third party software,
prevailing over those of this Agreement.
1. Definitions.
(a) “Media” means the CD-ROM titled “Software for FinePix CX”- which
is provided to you together with this Agreement.
(b) “Software” means the software which is recorded on Media.
(c) “Documentation” means the operation manuals of Software and
other related written materials which are provided to you together
with Media.
(d) “Product” means Media (including Software) and Documentation
collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a) to install one copy of Software onto one computer in binary machine
executable form;
(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any
part of Software, Media or Documentation to any third party without
FUJIFILM’s prior written consent. You also shall not sublicense,
assign or otherwise transfer all or any part of the rights granted to
you by FUJIFILM under this Agreement without FUJIFILM’s prior
written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not
copy or reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation.
You also shall not alter or remove copyright and other proprietary
notices that appear on or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer,
decompile, or disassemble Software.
Be sure to read this page before using the software.
4. Ownership.
All copyrights and other proprietary rights to Software and Documentation are
owned and retained by FUJIFILM or the third party suppliers as indicated on
or in Software or Documentation. Nothing contained herein shall be
construed, expressly or implicitly, as transferring or granting any right, license,
or title to you other than those explicitly granted under this Agreement.
5. Limited Warranty.
FUJIFILM warrants to you that Media is free from any defect in material
and workmanship under normal use for ninety (90) days from the date
of your receipt of Media. Should Media not meet the foregoing warranty,
FUJIFILM shall replace such defective Media with other Media bearing
no defect. FUJIFILM’s entire liability and your sole and exclusive
remedy with regard to any defect in Media shall be expressly limited to
such FUJIFILM’s replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES
PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,
EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,
INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY
COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER
PROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,
OR FITNESS FOR ANY PARTICULAR PURPOSE.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY
GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,
INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE
USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
8. No export.
You acknowledge that neither Software nor any part thereof, will be
transferred, or exported to any country or used in any manner in violation
of any export control laws and regulations to which Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof, FUJIFILM
may immediately terminate this Agreement without any notice.
10. Term.
This Agreement is effective until the date when you cease to use
Software, unless earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your own
responsibility and expense, delete or destroy immediately all Software
(including its copies), Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance with
laws of Japan.
3
EC Declaration of Conformity
We
Name:
Address:
FUJIFILM Europe GmbH
Heesenstrasse 31
40549 Dusseldorf, Germany
declare that the product
Product Name:
FUJIFILM DIGITAL CAMERA FinePix F40fd / FinePix F45fd / FinePix F47fd
Manufacturer’s Name:
FUJIFILM Corporation
Manufacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
conforms to the following Standards:
Safety: EN60065
EMC: EN55022: 1998 Classe B
EN55024: 1998
EN61000-3-2: 1995 + A1: 1998 + A2: 1998
following the provision of the EMC Directive (89/336/EEC, 92/31/EEC) and Low Voltage Directive (2006/95/EC).
Dusseldorf, Germany
April 1, 2007
Place
Date
Signature/Managing Director
This product comes with batteries. When these are empty, you shouldn’t throw them
away but deliver them as domestic chemical refuse.
4
Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this
product shall not be treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to
the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local
requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you have purchased the product.
In Countries outside the EU:
If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.
5
Contents
Warning................................................................. 2
IMPORTANT ......................................................... 3
EC Declaration of Conformity................................ 4
Disposal of Electric and Electronic Equipment
in Private Households...................................... 5
Contents................................................................ 6
Preface.................................................................. 9
About this Manual ............................................... 11
Accessories Included .......................................... 12
Camera Parts and Features................................ 13
Example of LCD Monitor Text Display ................ 14
Getting Ready
Charging the Battery ........................................... 15
Loading the Battery ............................................. 17
Loading the Memory Card................................... 19
Turning On and Off ............................................. 22
Setting the language, date, and time .......... 23
Correcting the Date and Time ............................. 26
Selecting the Language ...................................... 27
Using the Camera
Taking Pictures (B AUTO Mode) ................. 28
Using Intelligent Face Detection
when taking pictures ................................ 32
Taking pictures with the focus and
exposure locked ....................................... 33
AF-assist illuminator.................................... 35
Adjusting the shot composition ................... 36
Viewing the Images............................................. 37
Erasing the Images/Movies............................ 43
6
Advanced Features — Photography
Using the Photography Functions —
Procedure of Setting .....................................
Setting the Shooting Mode .................................
B AUTO ..............................................
Picture Stabilization ..............................
NATURAL LIGHT ................................
NATURAL & d.....................................
/
SCENE POSITION......................
H PORTRAIT ......................................
, LANDSCAPE...................................
. SPORT ............................................
/ NIGHT .............................................
FIREWORKS ...................................
SUNSET ..........................................
SNOW.............................................
BEACH............................................
UNDERWATER ...............................
MUSEUM.........................................
PARTY .............................................
FLOWER ..........................................
TEXT...............................................
s MANUAL..............................................
e Macro (Close-up) ...........................................
d Setting the Flash (Intelligent Flash) ................
* Self-Timer ......................................................
j Increasing Monitor Brightness ......................
46
49
49
49
50
50
51
52
52
52
52
53
53
53
54
54
54
54
55
55
56
57
58
61
65
Using p-MODE MENU (Photography)/
SHOOTING MENU ........................................ 66
Setting the p-MODE MENU
(Photography) .......................................... 66
Setting the SHOOTING MENU ................... 66
p-MODE MENU (Photography) ......................... 69
Setting the camera performance
( POWER MANAGEMENT) ................. 69
Changing the sensitivity setting
(S ISO) ................................................... 70
Changing the quality setting
( QUALITY) .......................................... 71
Changing the FinePix COLOR setting
( FinePix COLOR) ................................ 72
SHOOTING MENU ............................................. 73
Adjusting exposure compensation
(S EXP. COMPENSATION) .................. 73
Selecting light metering method
( PHOTOMETRY) ................................ 74
Adjusting color balance
(T WHITE BALANCE) ........................... 75
Taking pictures continuously
( CONTINUOUS).................................. 76
Specifying focusing mode
(H AF MODE)......................................... 79
Advanced Features — Playback
Using p-MODE MENU (Playback)/
PLAYBACK MENU ........................................ 81
Setting the p-MODE MENU (Playback) .... 81
Setting the PLAYBACK MENU ................... 81
p-MODE MENU (Playback) ..............................
Sending and receiving images
( IR COMMUNICATION) .....................
Setting automatic playback
( SLIDE SHOW) ..................................
DPOF set frame
( PRINT ORDER (DPOF)) ...................
PLAYBACK MENU.............................................
Rotating the images
( IMAGE ROTATE) ..............................
Protecting the images
( PROTECT)........................................
Copying the images
(V COPY) ..............................................
Adding voice memos to the images
( VOICE MEMO)..................................
Trimming the images
( TRIMMING).......................................
82
82
85
85
90
90
91
93
94
97
Advanced Features — Movie
r Recording Movies ....................................... 100
Changing movie size ............................... 102
w Playing Back Movies................................... 103
Settings
U SET-UP ...................................................... 106
Using the SET-UP menu.......................... 106
SET-UP menu option ............................... 107
Continued Q
7
Contents
Camera Connection
Usable Memory Cards
Using the AC power adapter
(sold separately) .......................................... 116
Connecting to a TV ........................................... 117
Connecting Camera Directly to Printer —
PictBridge Function ..................................... 118
Software Installation
Installation on a Windows PC ........................... 122
Installation on a Mac OS X ............................... 125
Connecting to a PC ........................................... 128
Using FinePixViewer................................. 131
Appendices
System Expansion Option................................. 134
Accessories Guide ............................................ 135
Using Your Camera Correctly ........................... 137
Power Supply and Battery ................................ 138
Notes on the xD-Picture Card™, the SD
Memory Card and the Internal Memory....... 142
Warning Displays .............................................. 143
Troubleshooting
Troubleshooting ................................................ 148
Specifications .................................................
Explanation of Terms .....................................
FUJIFILM Digital Camera Worldwide
Network ....................................................
Safety Notes ..................................................
8
156
163
164
171
You can use the xD-Picture Card and the SD Memory Card
with the FinePix F40fd / FinePix F45fd / FinePix F47fd. In this
Owner’s Manual, these cards are expressed as “Memory
Card”.
Preface
Z Test Shots Prior to Photography
For important photographs (such as weddings and
overseas trips), always take a test shot and view the
image to make sure that the camera is working normally.
• FUJIFILM Corporation cannot accept liability for any
incidental losses (such as the costs of photography or
the loss of income from photography) incurred as a
result of faults with this product.
Z Notes on Copyright
Images recorded using your digital camera system cannot
be used in ways that infringe copyright laws without the
consent of the owner, unless intended only for personal
use. Note that some restrictions apply to the
photographing of stage performances, entertainments
and exhibits, even when intended purely for personal use.
Users are also asked to note that the transfer of Memory
Card containing images or data protected under copyright
laws is only permissible within the restrictions imposed by
those copyright laws.
Z Liquid Crystal
If the LCD monitor is damaged, take particular care with
the liquid crystal in the monitor. If any of the following
situations arise, take the urgent action indicated.
• If liquid crystal comes in contact with your skin
Wipe the area with a cloth and then wash thoroughly
with soap and running water.
• If liquid crystal gets into your eye
Flush the affected eye with clean water for at least 15
minutes and then seek medical assistance.
• If liquid crystal is swallowed
Flush your mouth thoroughly with water. Drink large
quantities of water and induce vomiting. Then seek
medical assistance.
Continued Q
Z Handling Your Digital Camera
This camera contains precision electronic components.
To ensure that images are recorded correctly, do not
subject the camera to impact or shock while an image is
being recorded.
9
Preface
Z Trademark Information
•
and xD-Picture Card™ are trademarks of
FUJIFILM Corporation.
• IBM PC/AT is a registered trademark of International
Business Machines Corp. of the U.S.A.
• Macintosh, Power Macintosh, iMac, PowerBook, iBook
and Mac OS are trademarks of Apple Inc., registered in
the U.S. and other countries.
• Microsoft, Windows, the Windows logo, Windows Vista
and the Windows Vista logo are trademarks or
registered trademarks of Microsoft Corporation in the
United States and/or other countries. Windows is an
abbreviated term referring to the Microsoft® Windows®
Operating System.
* The “Designed for Microsoft® Windows® XP” logo refers
to the camera and the driver only.
• IrSimple™ Trademark is owned by the Infrared Data
Association®.
• IrSS™ Trademark or IrSimpleShot™ Trademark is
owned by the Infrared Data Association®.
• SD logo is a trademark.
• Other company or product names are trademarks or
registered trademarks of the respective companies.
Z Notes on Electrical Interference
If the camera is to be used in hospitals or aircrafts, please
note that this camera may cause interference to other
equipment in the hospital or aircraft. For details, please
check with the applicable regulations.
10
Z Explanation of Color Television System
NTSC:
PAL:
National Television System Committee, color
television telecasting specifications adopted
mainly in the U.S.A., Canada and Japan.
Phase Alternation by Line, a color television
system adopted mainly by European countries
and China.
Z Exif Print (Exif ver. 2.2)
Exif Print Format is a newly revised digital camera file
format that contains a variety of shooting information for
optimal printing.
* See “Using Your Camera Correctly” (➝p.137) for more
information.
About this Manual
Icons indicate the modes that are available.
e Macro (Close-up)
Use this mode to take close-up shots.
Available Photography modes: B,
/
( ,
, ,
), s ( p.49)
CHECK
,
,
Press e (p) to select Macro mode.
Press e (p) again to cancel Macro mode.
e appears on the LCD
monitor indicating that you
can take close-up shots.
,
• When setting
or
mode, the camera sets to
Macro mode automatically.
• Focal range (except for
and
)
Wide angle:
Approx. 7 cm to 80 cm (2.8 in. to 2.6 ft.)
Telephoto:
Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)
)
• Focal range ( ,
Wide angle:
Approx. 7 cm to 2 m (2.8 in. to 6.6 ft.)
Telephoto:
Approx. 30 cm to 2 m (1.0 ft. to 6.6 ft.)
• Effective flash range
Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)
When taking a picture using the flash for a wide angle
shot, the camera lens might cast a shadow in the frame.
In such case, increase the distance from the subject a
little and zoom in.
MEMO
1 / 24 / 2007
10:00 AM
• Use a tripod to prevent camera shake in Macro mode.
Any of the following cancels Macro mode:
- Changing the Shooting mode setting
CAUTION
This mark denotes issues that may affect the
camera’s operation.
CHECK
This mark denotes points to notice in the
camera’s operation.
MEMO
This mark denotes additional topics that
complement the basic operating procedures.
Z Usable Memory Cards
You can use the xD-Picture Card and the SD Memory Card with the FinePix F40fd / FinePix F45fd / FinePix F47fd. In this
Owner’s Manual, these cards are expressed as “Memory Card”.
Z About illustration
Illustrations in the Owner’s manual show the FinePix F40fd as an example.
Up, down, left, and right are indicated by black triangles in the Owner’s Manual. Up or down is shown as n or o, and left or
right is shown as p or q.
When pressing q:
When pressing DISP/BACK:
11
Accessories Included
• Rechargeable Battery NP-70 (1)
• CD-ROM (1)
Software for FinePix CX
• Strap (1)
• Battery Charger BC-70 (1 set)
• Owner’s Manual (this manual) (1)
Attaching the strap
Attach the strap as shown in 1 and 2.
When attaching the strap, move the fastener to adjust the
length and slightly away from the end of the strap, as
shown in figure 1.
• A/V cable (1)
• USB cable (1)
12
1
2
Camera Parts and Features
• Refer to the pages in parentheses for information on using the camera parts or features.
A Shutter button
B Zoom switch
C Illumination lamp (p.111)
D Flash (p.58)
E Lens (lens cover)
F POWER button
G AF-assist illuminator (p.35, 101)/Self-timer lamp
(p.62)
H Infrared port (p.82)
I Terminal cover
J Microphone
K A/V OUT (Audio/Visual output) socket (p.117)
L USB socket
M DC IN 5V socket (p.116)
N Indicator lamp (p.31)
O 4-direction (nopq) button
P LCD monitor
Q Speaker
R Tripod mount
S Mode dial
T w (Playback) button
U Photo mode (p) button (p.66, 81)
V Strap mount
W MENU/OK button
X
Intelligent Face Detection button (p.32)
Y DISP (Display)/BACK button (p.36, 37)
Z Battery cover (p.17)
! Memory Card slot (p.19)
_ Battery compartment (p.17)
# Battery release catch (p.17)
13
Example of LCD Monitor Text Display
*FinePix F40fd
Z Photography mode
M
A e Macro (close-up) (p.57)
B C Flash (p.58)
C
Intelligent Face Detection
(p.32, 69)
D s Photography mode (p.49)
E
Battery level indicator
(p.25)
F 9 White balance (p.75)
G f Continuous shooting (p.76)
H
Quick AF (p.69)
I AF frame (p.29)
J Date/Time (p.23)
K ( Self-timer (p.61)
L ) Photometry (p.74)
M iN Quality mode (p.71)
N Number of available frames
(p.160)
O
FinePix COLOR (p.72)
P { AF warning (p.29)
Q | Camera shake warning
(p.30)
R
Increasing monitor
brightness (p.65)
S Y Internal memory (p.21)
T ISO 100 Sensitivity (p.70)
U S Exposure compensation
(p.73)
Z Playback mode
A w Playback mode (p.37)
B
Intelligent Face Detection
(p.42)
C u DPOF (p.85)
D F Protection (p.91)
E Frame number (p.110)
F
Present (p.37)
G # Voice memo (p.94)
14
FinePix F40fd / FinePix F45fd / FinePix F47fd has internal memory that can store images without Memory Card. Y appears on the
LCD monitor when the internal memory is active.
Charging the Battery
1
Z Compatible battery
Rechargeable Battery NP-70 (1)
Set the battery correctly as indicated by the polarity icon.
Load the battery into the battery charger
BC-70.
Rechargeable Battery
NP-70
Terminals
Getting Ready
The battery is not fully charged at shipment and must be
fully charged before being used.
Indicator
CAUTION
• The battery is not fully charged at shipment and must be
fully charged before being used.
• Do not stick labels onto the battery as this could cause
the battery to become jammed inside the camera.
• Any contact between the battery terminals could cause
the battery to short circuit and overheat.
• See p.138-140 for information on the battery.
• Always use the Rechargeable Battery NP-70
(included). The use of other brands of rechargeable
battery could cause faults or damage to the camera.
• Do not split or peel outer labels of the battery.
Battery Charger
BC-70
Continued Q
15
Charging the Battery
2
Plug the battery charger into a power outlet.
The charging indicator lights green and charging begins.
When charging is completed, the indicator turns off.
Charging ends after about 2 hours.
To power outlet
Z <Charging Indicator and Statuses>
Charging
Indicator
Off
Lit green
Blinking
green
16
Status
Action
Battery not loaded
Load the battery to be
charged.
Fully charged
(charging complete)
Remove the battery
from the battery
charger.
Charging
Battery fault during
charging
–
Unplug the battery
charger and remove
the battery from the
battery charger.
CAUTION
• Unplug the battery charger from the power outlet when
it is not in use.
• The battery cannot be charged even when connecting
the camera directly to the AC power adapter.
• If the terminals of battery are solid, it may not be
possible to charge it. Clean the battery terminals and
battery charger terminals with a clean, dry cloth.
• Charging times increase at low temperatures.
• The NP-70 gradually loses its charge even when not
used. Charge a NP-70 just before taking pictures (in the
last day or two).
Loading the Battery
Battery is required to operate the digital camera. At first, load the battery in the camera.
Open the battery cover.
2
Load the battery.
Make sure that the indicators are aligned. Push the
battery release catch aside while loading the battery.
Check that the battery is firmly held in place.
Getting Ready
1
Battery release catch
CHECK
Check that the camera is turned off before opening the
battery cover.
Indicators
CAUTION
• Do not open the battery cover while the camera is on.
This could damage the Memory Card or ruin the image
files on the Memory Card.
• Do not apply force to the battery cover.
CAUTION
Load the battery in the correct direction.
Continued Q
17
Loading the Battery
3
18
Close the battery cover.
Loading the Memory Card
2
Insert an xD-Picture Card.
Gold marking
SD Memory Cards
Use of the SD Memory Cards listed below is
recommended. They are operation-checked at FUJIFILM
Corporation.
Maker: SanDisk
Model: Extremew-1GB/Ultrau-512MB, 1GB, 2GB
Gold contact area
Align the gold marking
with the gold contact
area, then insert an
xD-Picture Card
completely.
MEMO
• Compatible models will be updated in our website:
http://www.fujifilm.com/products/digital/
• Depending on the SD Memory Card, recording of
movies may be interrupted.
Use of above mentioned SD Memory Cards are
recommended.
• The camera is not compatible with multimedia cards.
1
Getting Ready
Although you can store pictures in the camera’s internal
memory, you can store many more images on the
Memory Card (sold separately). You can use the xDPicture Card and the SD Memory Card with the FinePix
F40fd / FinePix F45fd / FinePix F47fd. In this Owner’s
Manual, these cards are expressed as “Memory Card”.
(SD Memory Card)
Gold marking
Open the battery cover.
Gold contact area
Align the gold marking with the gold contact area,
then insert an SD Memory Card completely.
Continued Q
19
Loading the Memory Card
CAUTION
Be sure to unlock the protection of the SD Memory Card
before inserting it. If it is locked, recording/deleting
images, as well as formatting are not available. To unlock
the protection, slide the switch back, and the SD Memory
Card will work normally.
3
Close the battery cover.
Protection
switch
How to replace the Memory Card
CAUTION
• A new SD Memory Card or a card previously used on a
PC or any device other than the camera should be
formatted (➝p.113) on the camera before use.
• Do not use a miniSD adaptor or a microSD adaptor
which have exposed contact areas on the back. Use of
these adaptors may cause a malfunction or damage
due to the improper contacts.
Push the Memory Card into the slot and then slowly remove
your finger. The lock is released and the Memory Card is
pushed out.
20
CAUTION
Z About internal memory
1 / 24 / 2007
10:00 AM
FinePix F40fd / FinePix
F45fd / FinePix F47fd has
internal memory that can
store images without
Memory Card. Y appears
on the LCD monitor when
internal memory is active.
Getting Ready
• When storing Memory Cards, make sure that they are
kept out of the reach of children. A Memory Card could
be swallowed and cause suffocation. If a child swallows
a Memory Card, seek medical attention or call
emergency number right away.
• If the Memory Card is oriented incorrectly, it will not go
all the way into the slot. Do not apply force when
inserting a Memory Card.
• Note that the Memory Card may spring out if you
release your finger quickly from the card immediately
after the lock is released.
• Operation of this camera is only guaranteed when it is
used with FUJIFILM xD-Picture Card and
operationchecked SD Memory Card (➝p.19).
• See p.142 for information on the xD-Picture Card, SD
Memory Card and the internal memory.
When a Memory Card (sold separately) is inserted
[Record images]: Record images to a Memory Card.
[Playback images]: Playback images in a Memory Card.
When a Memory Card (sold separately) is not inserted
[Record images]: Record images to internal memory.
[Playback images]: Playback images in internal memory.
MEMO
• The size of an image file varies depending on the
subject. For this reason, the number recorded may not
represent the actual number of frames.
• See p.160 for information on the standard number of
available frames.
Z About images in the internal memory
Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
DVD-R, CD-R, CD-RW, hard disk, etc.).
It is possible to transfer saved images on the internal
memory to a Memory Card (➝p.93).
CAUTION
Erase the unnecessary images in the internal memory.
(➝p.43)
21
Turning On and Off
Turning the camera on in
Photography mode
Press POWER down fully to turn the camera on.
Press POWER again to turn the camera off.
MEMO
Changes between Photography mode and
Playback mode
Press w during shooting to change to Playback mode.
Press the shutter button down halfway to return to
Photography mode.
CAUTION
• The lens moves and the lens cover opens when turning
the camera on in Photography mode. Take care not to
obstruct the lens.
• Take care not to get fingerprints on the camera lens as
this will result in impaired image quality in your shots.
22
Turning the camera on in
Playback mode
Press w for about 1 second to turn the camera on in
Playback mode.
Press POWER to turn the camera off.
MEMO
To change to Photography mode, press the shutter button
down halfway.
2
Set the date and time.
DATE / TIME NOT SET
When using the camera for the first time after purchasing,
the language, date, and time are cleared. Set the
language, date, and time.
1
Getting Ready
Setting the language, date, and
time
YY.MM.DD
screen appears when turning
the camera on.
SET
1. 1
12:00
AM
NO
A Press p or q to select Year, Month,
Day, Hour, or Minute.
START MENU
/ LANG.
B Press n or o to correct the setting.
SET
NO
MEMO
A Press n, o, p, or q to select the
language.
B Press MENU/OK to confirm the setting.
• Holding down n or o changes the numbers
continuously.
• When the time displayed passes “12”, the AM/PM
setting changes.
Continued Q
23
Turning On and Off
3
4
Change the date format.
Set the POWER MANAGEMENT options.
DATE / TIME NOT SET
POWER MANAGEMENT
POWER SAVE
QUICK AF
CLEAR DISPLAY
DD . MM . YY
MM / DD / YY
1 / 24 / 2007
YY . MM . DD
SET
10:00
AM
Power saving for longer
battery life
NO
SET
A Press p or q to select the date format.
A Select an option from the menu.
B Press n or o to set the format.
C Always press MENU/OK after the settings
are completed.
Date format
ex. January 24, 2007
YY.MM.DD: 2007.1.24
MM/DD/YY: 1/24/2007
DD.MM.YY: 24.1.2007
24
NO
B Press MENU/OK to confirm the setting.
MEMO
The confirmation screen appears when the battery is
removed and the camera has been left unused for a long
period. Keep the charged battery inside of the camera to
retain the camera settings. Once a charged battery is
installed for 4 days, the settings will be retained for
roughly 7 days, even if the battery is removed.
When the Auto power off function is active, if the camera
is left unused for 2 or 5 minutes, this function turns the
camera off (➝p.113). To turn the camera back on, press
POWER. To play back images, hold down w for about 1
second.
Checking the battery charge
Turn the camera on and check the battery level indicator
on the LCD monitor.
Getting Ready
Auto power off function
MEMO
When POWER MANAGEMENT is set to
QUICK AF
or
CLEAR DISPLAY, AUTO POWER OFF cannot be
cancelled.
A There is ample battery charge. (Lit white)
B The battery is almost half charged. (Lit white)
C There is insufficient charge left in the battery. The
battery will soon run out. Have a charged battery
ready. (Lit red)
D The battery is depleted. The display will shortly go
blank and the camera will stop working. Replace the
battery. (Blinking red)
CAUTION
• Due to the nature of the battery, the battery level
indicator (
,
, or V) may appear early
when the camera is used in cold locations. Try warming
the battery in your pocket or a similar location before
use.
• Battery with no remaining charge (V blinking red)
may cause camera faults such as the camera turning
itself off without retracting the lens. Always load a fully
charged battery.
• Depending on the camera mode, the transition from
to V may occur more quickly.
25
Correcting the Date and Time
1
2
Open the SET-UP menu.
SET - UP
SHOOTING MENU
CONTINUOUS
SET-UP
Display the DATE/TIME screen.
OFF
DATE / TIME
BEEP VOLUME
SHUTTER VOLUME
SHUTTER SOUND
PLAYBACK VOLUME
LCD BRIGHTNESS
A Press MENU/OK to open the menu.
A Press p or q to select
B Press n or o to select U SET-UP.
B Press o to move to menu item.
C Press q.
C Press n or o to select
.
DATE/TIME.
D Press q.
See “2 Set the date and time.” (➝p.23).
26
Selecting the Language
2
Open the SET-UP menu.
screen.
SET - UP
SHOOTING MENU
CONTINUOUS
SET-UP
Display the
Getting Ready
1
OFF
FORMAT
AUTO POWER OFF
TIME DIFFERENCE
BACKGROUND COLOR
VIDEO SYSTEM
ENGLISH
2 MIN
NTSC
A Press MENU/OK to open the menu.
A Press p or q to select
B Press n or o to select U SET-UP.
B Press o to move to menu item.
C Press q.
C Press n or o to select
.
.
D Press q.
See “1
screen appears
when turning the camera on.” (➝p.23).
27
Taking Pictures (B AUTO Mode)
This section describes the basic operations.
Holding the camera correctly
1
Brace your elbows
against your sides and
hold the camera with both
hands.
Turn the camera on.
A Press POWER to turn the camera on.
Do not cover the lens or
flash with your fingers.
CAUTION
B Set the Mode dial to B.
28
• Moving the camera while shooting gives a blurred
picture (camera shake). Hold the camera steadily with
both hands.
• If the lens or flash is obscured by your fingers or the
strap, subjects may be out of focus or the brightness
(exposure) of your shot may be incorrect.
2
MEMO
Check the composition on the LCD monitor.
To adjust zoom scale using the Zoom switch:
AUTO
N 25
[ tele zoom switch
(Zoom in)
AUTO
3
Focus on the main subject in the AF frame
and press the shutter button down halfway.
N 25
Using the Camera
] wide zoom switch
(Zoom out)
• Select e Macro mode to take close-up shots (➝p.57).
• Use digital zoom when you want to shoot the subject
closer (➝p.111).
Zoom bar
AF frame
Halfway
pressed
AF frame
becomes smaller
and camera
focuses on the
subject.
CHECK
• Focal range
Wide-angle: approx. 45 cm (1.5 ft.) to infinity
Telephoto: approx. 60 cm (2.0 ft.) to infinity
• Optical zoom focal length (35 mm camera
equivalent)
Approx. 36 mm to 108 mm
• Max. zoom scale
3×
• Focus on the subject
Double beep is heard
Indicator lamp lit green
• Not focus on the subject
No sound
{ indicated
Indicator lamp blinking green
Continued Q
29
Taking Pictures (B AUTO Mode)
MEMO
• The shutter button has a halfway point at which focus
and exposure are automatically optimized before taking
the picture by pressing fully down.
• When pressing the shutter button halfway, a lens
operation sound may be heard.
4
Flash
When pressing the shutter
button down halfway, b
appears on the LCD monitor
before the flash fires.
Press the shutter button fully.
250
F 5.6
Change the flash mode when you want to take pictures without
flash. See p.58 for information on flash.
CAUTION
Halfway pressed
Fully pressed
CAUTION
When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
MEMO
• When the subject is not in the AF frame, use AF/AE lock
to take the picture (➝p.34).
• When pressing the shutter button down fully in one
motion, the camera takes the picture without the AF
frame changing.
• When a picture is taken, the illumination lamp on the
front of the camera lights to indicate that shooting is
complete.
30
• The image shown on the LCD monitor before the
picture is taken may differ in brightness, color, etc. from
the image actually recorded. Play back the recorded
image to check it (➝p.37).
• When selecting a slow shutter speed that will cause
camera shake, | appears on the LCD monitor. Use
flash or a tripod.
• See p.143-147 for information on warning displays. See
“Troubleshooting” (➝p.148-155) for more information.
Z Indicator lamp display
The indicator lamp lights or blinks when pressing the
shutter button, etc. The indicator lamp shows the camera
status.
Status
Locking the focus, Setting the Mode
dial
Blinking green
Camera shake warning, AF warning,
or AE warning (ready to shoot)
Blinking green and
orange alternately
Recording to Memory Card or internal
memory (ready to shoot)
Lit orange
Recording to Memory Card or internal
memory (not ready)
Blinking orange
Charging flash (flash will not fire)
Blinking red
• Warnings for Memory Card and
internal memory
Card not formatted, incorrect format,
memory full, Memory Card or
internal memory error
• Lens operation error
Using the Camera
Indicator lamp
Display
Lit green
MEMO
Detailed warning messages appear on the LCD monitor
(➝p.143-147).
Continued Q
31
Taking Pictures (B AUTO Mode)
Using Intelligent Face Detection
when taking pictures
Intelligent Face Detection allows you to focus on and
adjust the brightness of people’s faces. Intelligent Face
Detection is effective with the camera held horizontally or
vertically.
Available Photography modes: B,
/
(H,
,
,
,
,
), s
,
A To activate Intelligent Face Detection press
To turn Intelligent Face Detection off, press
1 / 24 / 2007
10:00 AM
Green frame
32
,
,
once.
again.
When there are multiple people
in the frame, Intelligent Face
Detection will set a green frame
around the face nearest to the
center of the picture. This face
has focusing priority.
B Press the shutter button down fully to
take pictures.
Subjects not suitable for Intelligent Face Detection
Intelligent Face Detection automatically focuses on a face(s)
turned towards the camera. However, difficulties will occur
with the Intelligent Face Detection mode in the following
situations:
• The face is obscured by glasses, sunglasses, a hat or hair.
• A person turned sideways, or who has their head tilted
• The subject is too far away to recognize a face
Intelligent Face Detection will not work in cases where the
subject is standing on his/her head, is not a person (pet or
other animal), or if the camera is not held correctly.
CAUTION
Taking pictures with the focus
and exposure locked
AUTO
1 / 24 / 2007
N 25
10:00 AM
Using the Camera
• If the camera or subject move as the picture is taken,
the subject’s face may move out of the Intelligent Face
Detection frame.
• When the camera is detecting multiple faces, the green
frame is set around the face near the center. If you want
to focus on another subject, move the camera so that
the new subject is in the center of the screen.
If focus is still not achieved, press
(Intelligent Face
Detection) to turn off the function, and take the picture
using AF/AE lock (➝p.34).
Intelligent Face Detection can focus on a face in a white
frame providing the subjects in the green and white
frame are of the same focal length.
• Pressing the shutter button halfway with Intelligent Face
Detection off, the focus will be on the center of the
frame.
In the above composition, the subjects (two people in this
case) are not in the AF frame. Pressing the shutter button
halfway at this point will result in the subjects being out of
focus.
AF/AE lock is useful:
Use AF/AE lock to guarantee best result when shooting a
subject that is not suited to autofocusing (➝p.35).
CAUTION
When taking a picture in AF/AE lock, cancel
Intelligent Face Detection.
Continued Q
33
Taking Pictures (B AUTO Mode)
3
Using AF/AE lock
1
Move the camera slightly so that one of the
subjects is in the AF frame.
AUTO
1 / 24 / 2007
Continue to hold the shutter button down
halfway. Move the camera back to the
original image and press the shutter button
fully.
Click
N 25
10:00 AM
250
F 5.6
Fully pressed
2
Press the shutter button down halfway to
focus on the subject.
Double
beep
250
Halfway
pressed
34
F 5.6
MEMO
• AF/AE lock can be applied repeatedly before the shutter
is released.
• Use AF/AE lock in all Photography modes to guarantee
excellent results.
• On FinePix F40fd / FinePix F45fd / FinePix F47fd,
pressing the shutter button down halfway locks the
focus and exposure settings (AF and AE lock).
Subjects not suitable for autofocus
Use this illuminator to focus on the subject in dimly lit
conditions.
When pressing the shutter button down halfway, the
camera fires the AF-assist illuminator (white) while
focusing on your subject.
Using the Camera
FinePix F40fd / FinePix F45fd / FinePix F47fd uses a highprecision autofocusing mechanism. However, it may have
difficulty focusing on the following:
AF-assist illuminator
AF-assist
illuminator
Very shiny subjects such
as a mirror or car body
•
•
•
•
•
Fast moving subjects
Subjects photographed through glass
Subjects that do not reflect well, such as hair or fur
Subjects with no substance, such as smoke or flames
Dark subjects
Subjects with little or no contrast between the subject and
the background (such as subjects dressed in the same color
as the background)
• Shots where another high-contrast object (not the subject) is
close to the AF frame and is either closer or further away
than your subject (such as a shot of someone against a
background with strongly contrasting elements)
For such subjects use AF/AE lock (➝p.34).
MEMO
• Even when the AF-assist illuminator fires, the camera
may have difficulty focusing in some conditions.
• Even though there is no danger to safety, do not expose
it directly in someone’s eyes.
• See p.107 for information on turning the AF-assist
illuminator off.
• AF-assist illuminator does not fire in ,, .,
,
,
,
, or
mode.
• When using the AF-assist illuminator in Macro mode,
the camera may have difficulty focusing to take closeup shots.
Continued Q
35
Taking Pictures (B AUTO Mode)
Adjusting the shot composition
Select the LCD monitor display.
Press DISP/BACK to change the LCD monitor display.
Best framing
Position the main subject at
the intersection of two lines
in this frame or align one of
the horizontal lines with the
horizon. Use this frame as a
guide to the subject’s size
and the balance of the shot
while composing a shot.
1 / 24 / 2007
10:00 AM
MEMO
Always use AF/AE lock when composing a shot. The
image may be out of focus if AF/AE lock is not used.
1 / 24 / 2007
10:00 AM
Text displayed
No text displayed
1 / 24 / 2007
10:00 AM
Framing guideline
displayed
36
Viewing the Images
Playback your images to check them. For important
photographs, always take a test shot and view the image
to make sure that the camera is working normally.
Select the LCD monitor display.
Press DISP/BACK during Playback mode to change the
LCD monitor display.
Using the Camera
Setting the camera to Playback
mode
Press w during shooting to change to Playback mode.
100-0001
N
ISO 100
When the camera is off, press w for about 1 second to
turn the camera on in Playback mode.
MEMO
1 / 24 / 2007
10:00 AM
No text displayed
Text displayed
• When pressing w, the last image shot appears on the
LCD monitor.
• When playing back images shot with a camera other
than FinePix F40fd / FinePix F45fd / FinePix F47fd,
a present icon appears on the screen.
CAUTION Still images viewable on FinePix F40fd
/ FinePix F45fd / FinePix F47fd
This camera will display still images recorded on FinePix
F40fd / FinePix F45fd / FinePix F47fd or still images
(excluding some uncompressed images) recorded on any
FUJIFILM digital camera that supports xD-Picture Cards
or SD Memory Cards. Clear playback or playback
zooming may not be possible for still images shot on
cameras other than FinePix F40fd / FinePix F45fd /
FinePix F47fd.
Sorting by date
Continued Q
37
Viewing the Images
Single-frame playback
Playback zoom
1
Zoom in / Zoom out.
To zoom in an image during single-frame playback:
] wide zoom switch
(Zoom out)
1 / 24 / 2007
[ tele zoom switch
(Zoom in)
10:00 AM
To select the required image:
Press p: last image
Press q: next image
Selecting images
Zoom bar
To select images on the
thumbnail lists screen, hold
down p or q for 1 second
during playback.
When releasing p or q,
camera returns to singleframe playback.
38
Press ] or [ to zoom in or out on
an image.
2
Display another part of the image.
Press n, o, p, or q to display another
part of the image.
Use this function to display a single frame, 2 frames or 9
frames. You can compare and select images using the
Multi-frame display. Use the zoom lever to change the
display.
1 / 24 / 2007
Using the Camera
Navigation screen
(Current displayed
image)
Multi-frame playback
10:00 AM
MEMO
Pressing DISP/BACK cancels playback zoom.
Z Zoom scales (FinePix F40fd / FinePix F45fd)
Quality mode
i (3296 × 2472 pixels)
Max. zoom scale
Approx. 5.2×
% (3504 × 2336 pixels)
Approx. 5.5×
4 (2304 × 1728 pixels)
Approx. 3.6×
2 (1600 × 1200 pixels)
Approx. 2.5×
Z Zoom scales (FinePix F47fd)
Quality mode
Max. zoom scale
(3488 × 2616 pixels)
Approx. 5.5×
% (3696 × 2464 pixels)
Approx. 5.8×
[ (2592 × 1944 pixels)
Approx. 4.1×
3 (2048 × 1536 pixels)
Approx. 3.2×
2 (1600 × 1200 pixels)
Approx. 2.5×
* Zoom cannot be performed when the images recorded
by ` are played back.
Continued Q
39
Viewing the Images
2 frames playback
A Press n, o, p or q to select the image
you want to compare, such as the image
taken in
NATURAL & d mode.
B Press MENU/OK to enlarge the image.
9 frames playback
A Press n, o, p or q to change the
colored frame and select an image.
Press n or o repeatedly to jump to the
next page.
40
B Press MENU/OK to enlarge the image.
Sorting by date
In sorting by date mode, you can view all images taken on
the same day.
1 / 22
1 / 23
1 / 24
2007
1 / 22
1 / 23
1 / 24
14
Using the Camera
2007
Selecting the date
1 / 14
A Press n, o, p, or q to move the cursor
(colored frame) to the selecting frame.
A Press n, o, p, or q to move the cursor
(colored frame) to
on the upper left
frame.
B Press p to display the selecting date.
B Press MENU/OK to enlarge the image.
C Press n or o to move the cursor (colored
frame) to select the date.
Press n or o repeatedly to jump to the
next page.
D Press q.
41
Viewing the Images
Using Intelligent Face Detection
when playing back pictures
You can display and enlarge the faces in images when
playing back the images shot using the Intelligent Face
Detection function (
is displayed) (➝p.32).
ZOOM
BACK
A Press
, then the frame(s) appears on
the detected face(s) in pictures.
B The detected face(s) is enlarged each time
you press
.
C Press n, o, p, or q to display another
part of the image (➝p.38).
CAUTION
The images recorded by ` cannot be enlarged.
MEMO
Press DISP/BACK to return to normal playback.
42
Setting the camera to w
Playback mode (➝p.37)
Erasing the Images/Movies
Use this mode to erase unnecessary images or movies to
have ample free space on the Memory Card or internal
memory. Your camera calls images “frames”.
/n)
(n) erases images easily.
ERASE OK?
OK
PLAYBACK MENU
ERASE
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO
TRIMMING
CANCEL
A Press MENU/OK to open the PLAYBACK
MENU.
SET
A Press p or q to select the erasing
image.
B Press
Using the Camera
Using the erase button (
Pressing
Erasing the images using
Playback menu
B Press n or o to select
ERASE.
(n).
C Press q.
C Press p or q to select OK.
Continued Q
DPress MENU/OK to erase the displayed
image.
43
Setting the camera to w Playback mode (➝p.37)
Erasing
Erasing
the Images/Movies
the Images/Movies
Erasing one frame at a time (FRAME)
PLAYBACK MENU
ERASE
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO
TRIMMING
BACK
FRAME
ALL FRAMES
ERASE OK?
YES
D Press n or o to select FRAME or ALL
FRAMES.
CANCEL
A Press p or q to select the erasing frame
(file).
E Press MENU/OK to confirm the setting.
B Press MENU/OK to erase the currently
displayed frame (file).
MEMO
To erase another frame (file), repeat above steps.
When erasing frames (files) is completed, press DISP/
BACK.
CAUTION
Pressing MENU/OK repeatedly erases consecutive
frames (files). Take care not to erase a frame (file) by
mistake.
44
Setting the camera to w Playback mode (➝p.37)
Erasing all frames (ALL FRAMES)
OK
CANCEL
SET
CAUTION
A Press p or q to select OK.
Using the Camera
ERASE ALL OK?
IT MAY TAKE A WHILE
MEMO
• When using a Memory Card, the images in the Memory
Card are erased. When not using a Memory Card, the
images in the internal memory are erased.
• Protected frames (files) cannot be erased. Unprotect
the frames (files) before erasing them (➝p.91).
• If “DPOF SPECIFIED. ERASE OK?” or “DPOF
SPECIFIED. ERASE ALL OK?” appears, press MENU/
OK again to erase the frames (files).
Erased frames (files) cannot be recovered. Back up
important frames (files) onto your PC or another media.
B Press MENU/OK to erase all the frames
(files).
MEMO
Press DISP/BACK to cancel
erasing of all the frames
(files). Some unprotected
frames (files) will be left
unerased.
CANCEL
45
Using the Photography Functions — Procedure of Setting
Specify the camera settings for taking pictures to get the
best result. A general guide is given below.
B Auto
This is the easiest mode for taking
pictures (➝p.49).
1
Picture
Stabilization
Used for selecting a fast shutter speed
that reduces camera shake and movingsubject blurring (➝p.49).
Select the Photography mode.
Turn the Mode dial to select the Photography mode.
The camera settings are tailored to the scene being
shot.
46
Natural Light
This mode produces beautiful images
that retain the natural ambience when
shots are taken in low-light conditions
(➝p.50).
NATURAL & d
This mode shoots 2 images continuously
without flash and with flash. Shooting with
flash allows you to take a picture of a
main subject brightly. This mode is useful
for shooting 2 different types of pictures at
the same time (➝p.50).
/
Scene position
Select the best Shooting mode for the
scene being shot (➝p.51).
s Manual
This mode provides more detailed
settings that are impossible to set in
B Auto mode (➝ p.56).
2
Specify the photography settings.
Pressing buttons or selecting menu allows you to
specify photography functions. You can obtain the
best result for shooting.
e (p) Macro button
d (q) Flash button
* (o) Self-timer button
Intelligent
Face
Detection
Pressing this button allows you to focus
on people’s faces (➝p.32).
e Macro
Used for close-up shots (➝p.57).
d Flash
Used for shots in dark locations or for
backlit subjects, etc. (➝p.58).
* Self-timer
Used in situations such as group shots
where the photographer is included in the
shot (➝p.61).
Continued Q
Advanced Features — Photography
Intelligent Face
Detection button
Z Specifying functions using buttons
47
Using the Photography Functions — Procedure of Setting
Z Specifying functions using p-MODE MENU (p
button)
POWER
MANAGEMENT
Use to set the camera performance
(➝p.69).
S ISO
Use to specify required sensitivity
setting (➝p.70).
QUALITY
Use to specify required image size
(➝p.71).
FinePix COLOR
Use to specify required color tone
(➝p.72).
Z Specifying functions using SHOOTING MENU
(MENU/OK button)
D Exposure
compensation
Used for changing the image
brightness (only s) (➝p.73).
PHOTOMETRY
TWHITE
BALANCE
Use to adjust the color tone (only s)
(➝p.75).
CONTINUOUS
H AF MODE
Use to select light metering method
(only s) (➝p.74).
Use to take pictures continuously
(➝p.76).
Use to specify focusing mode (only
s) (➝p.79).
MODE MENU
POWER MANAGEMENT
ISO
QUALITY
COLOR
48
AUTO
N
STD
SHOOTING MENU
EXP. COMPENSATION
PHOTOMETRY
WHITE BALANCE
CONTINUOUS
AF MODE
SET - UP
AUTO
OFF
Setting the Shooting Mode
Picture Stabilization
You can select the most suitable setting according to the
subject by selecting one of the Shooting modes.
Use this mode to select a fast shutter speed that reduces
camera shake and moving-subject blurring.
B AUTO
Set the Mode dial to
.
Camera specifies all settings other than p-MODE
(Quality and FinePix COLOR) automatically.
CHECK
Set the Mode dial to B.
• Available flash modes:
AUTO, b, d, C
• Only AUTO can be selected for the
setting.
ISO (sensitivity)
Advanced Features — Photography
This is the easiest mode for providing crisp and clear
shots.
Use this mode for ordinary photography.
CHECK
• Available flash modes:
AUTO, b, d, C
• Only AUTO can be selected for the
setting.
ISO (sensitivity)
49
Setting the Shooting Mode
NATURAL & d
NATURAL LIGHT
This mode produces beautiful images that retain the
natural ambience when shots are taken in low-light
conditions.
This mode is also ideal for shooting indoor or situations
where the flash cannot be used.
Camera sets the high-sensitivity setting when selecting
the Natural light mode. This mode is effective for reducing
camera shake and moving-subject blurring when taking
pictures in low-light conditions.
Set the Mode dial to
This mode shoots 2 images continuously without flash
and with flash. Shooting with flash allows you to take a
picture of a main subject brightly. Shooting without flash
produces beautiful images that retain the natural
ambience. This mode is useful for shooting 2 different
types of pictures at the same time.
Set the Mode dial to
.
.
When pressing the shutter button, first picture is taken
without flash and next picture is taken with flash.
Always 2 pictures are taken per 1 shot.
Do not move the camera until the shooting ended.
CHECK
• Flash cannot be used in the Natural light mode.
• Only AUTO can be selected for the
ISO (sensitivity)
setting.
MEMO
This mode helps to avoid failed shots that may occur
when using other Shooting modes when taking a picture
against the sun, etc.
CHECK
• Flash fires automatically. Do not use this mode at
situations where the flash cannot be used.
• Only AUTO can be selected for the
ISO (sensitivity)
setting.
• When there is insufficient space on the xD-Picture
Card or internal memory for 2 shots, a picture cannot be
taken.
• Continuous shooting is disabled when setting
.
50
/
Z Selecting Scene position setting
SCENE POSITION
This mode provides the best Scene position setting for the
scene being shot. Choose from 15 types of scene.
Select the Scene position setting in the SCENE
POSITION menu.
/
.
Portrait with soft
overall tone and
beautiful skin tones
CANCEL
SET
A Press MENU/OK to open the menu.
About
and
of the Mode Dial
The camera enables to set the scene position for
and
separately.
For example, select H for
and , for
separately
at traveling. The setting combination can be used for variety
of shooting scene. The menu options of
and
are
the same. However the options cannot be set for both
and
.
MEMO
• See p.59 for information on the available flash modes.
• When anything other than
and
in the Shooting
mode is selected,
p-CHROME (➝p.72) cannot be
set.
• AF-assist illuminator does not fire in ,, .,
,
,
,
, and
mode.
• Only AUTO can be selected for the
ISO (sensitivity)
setting.
B Press n or o to select
POSITION.
SCENE
C Press q.
Advanced Features — Photography
Set the Mode dial to
PORTRAIT
LANDSCAPE
SPORT
NIGHT
D Press n or o to select the setting.
E Press MENU/OK button to confirm the
setting.
Continued Q
51
Setting the Shooting Mode
H PORTRAIT
. SPORT
Use this mode for
photography to get
beautiful skin tones and
soft overall tone.
Use this mode to take
pictures of a moving
subject.
It gives priority to faster
shutter speeds.
, LANDSCAPE
Use this mode for shooting
scenery in daylight and
provides crisp, clear shots of
scenery such as buildings
and mountains.
CHECK
CHECK
When setting . Sport mode, the camera sets to
QUICK AF(➝p.69) automatically.
/ NIGHT
Use this mode for shooting
evening and night scenes.
A picture is taken with a slow
shutter of up to 3 seconds.
Flash cannot be used in the Landscape mode.
CHECK
Use a tripod to prevent camera shake, because a picture
is taken with a slow shutter.
52
FIREWORKS
SUNSET
Use this mode to shoot
fireworks.
It is effective for taking
more vivid shots of
fireworks with a slow
shutter.
Use this mode to shoot
sunset, making the colors
more vivid.
Advanced Features — Photography
CHECK
• Flash cannot be used in the Fireworks mode.
• Shutter speed setting: 1/2 sec. to 4 sec.
• Use a tripod to prevent camera shake in the Fireworks
mode.
Z Selecting the exposure time setting
N 25
1 / 24 / 2007
2.0"
SNOW
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at snowy
scene where the whole
screen appears white.
10:00 AM
Continued Q
Press p or q to select the exposure time.
53
Setting the Shooting Mode
BEACH
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at beach
under strong sunlight.
UNDERWATER
Use this mode for shooting
with a waterproof case.
It is effective for taking
more vivid shots of ocean
blue.
MUSEUM
Use this mode for taking
pictures in places such as
museum where the use of
flash and making an
operation sound and a
shutter sound are
restricted.
Flash mode is forcibly set
to Suppressed flash, and
operation sound, shutter sound, and the AF-assist
illuminator/self-timer lamp are off.
MEMO
Check whether photography is permitted before using this
mode.
PARTY
Use this mode for shooting
at indoor wedding and
party.
This mode produces
beautiful images that retain
the natural ambience when
shots are taken in low-light
conditions.
54
FLOWER
TEXT
Use this mode to shoot
documents and white
board.
It is effective for taking
clearer shots of letters.
CHECK
CHECK
• Flash cannot be used in the Flower mode.
• Focal range
Wide angle:
Approx. 5 cm to 2 m (2.0 in. to 6.6 ft.)
Telephoto:
Approx. 30 cm to 2 m (1.0 ft. to 6.6 ft.)
Focal range
Wide angle:
Approx. 5 cm to 2 m (2.0 in. to 6.6 ft.)
Telephoto:
Approx. 30 cm to 2 m (1.0 ft. to 6.6 ft.)
Advanced Features — Photography
Use this mode to take
clear close-up shots when
zooming up a flower.
It is effective for taking
more vivid shots of flower
petal.
55
Setting the Shooting Mode
s MANUAL
This is an automatic mode to specify the settings except
for the shutter speed and aperture setting.
Set the Photography functions to manual to easily control
yourself.
Set the Mode dial to s.
Photography functions:
• S EXP. COMPENSATION(➝p.73)
•
PHOTOMETRY (➝p.74)
• T WHITE BALANCE (➝p.75)
• H AF MODE (➝p.79)
CHECK
Available flash modes:
AUTO, b, d, C, c, n
56
e Macro (Close-up)
Use this mode to take close-up shots.
Available Photography modes: B,
/
( , , ,
), s (➝p.49)
CHECK
,
,
Press e (p) to select Macro mode.
Press e (p) again to cancel Macro mode.
• When setting
or
mode, the camera sets to
Macro mode automatically.
• Focal range (except for
and
)
Wide angle:
Approx. 7 cm to 80 cm (2.8 in. to 2.6 ft.)
Telephoto:
Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)
• Focal range ( ,
)
Wide angle:
Approx. 7 cm to 2 m (2.8 in. to 6.6 ft.)
Telephoto:
Approx. 30 cm to 2 m (1.0 ft. to 6.6 ft.)
• Effective flash range
Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)
When taking a picture using the flash for a wide angle
shot, the camera lens might cast a shadow in the frame.
In such case, increase the distance from the subject a
little and zoom in.
MEMO
1 / 24 / 2007
10:00 AM
Advanced Features — Photography
e appears on the LCD
monitor indicating that you
can take close-up shots.
,
• Use a tripod to prevent camera shake in Macro mode.
• Any of the following cancels Macro mode:
- Changing the Shooting mode setting
- Turning the camera off
• Even if
MULTI (➝p.79) in the HAF-mode is set, the
camera focuses near the center of the screen.
• AF-assist may not function correctly if the camera is up
close to the subject, such as in macro-mode.
57
d Setting the Flash (Intelligent Flash)
Flash photography is useful for taking pictures at night or
indoor dark locations. Choose from 6 flash modes
according to the type of shot. See p.59 for information on
the available Photography modes.
AUTO Auto flash (not displayed)
Use this mode for ordinary photography.
The flash fires as required by the shooting conditions.
b RED EYE REDUCTION
MEMO
By calculating subject distance and brightness, the
camera automatically adjusts the flash amount and
sensitivity to suit shooting conditions. This maintains
consistent balance of bright/dark areas across the image
in low-light conditions (dimly-lit room, etc). The Intelligent
Flash feature guarantees consistent results when using
the flash.
This mode is suitable for shooting portraits in
low-light conditions.
Use this mode to minimize red-eye (eyes appear
in red in the finished photo).
MEMO Red-eye effect
When using the flash to take a picture of people in lowlight conditions, their eyes sometimes appear red in the
picture. This is caused by the light of the flash reflecting
off the inside of the eye.
d FORCED FLASH
The flash setting changes each
time you press d (q).
MEMO
When pressing the shutter button down halfway, b
appears on the LCD monitor before the flash fires.
58
Use this mode in backlit scenes, or to get the correct
colors when taking a picture under bright lighting.
In this mode, the flash fires in bright as well as dark
conditions.
C SUPPRESSED FLASH
This mode is suitable for situations where the flash cannot
be used.
Use a tripod to prevent camera shake when shooting in
Suppressed flash mode in the dark condition.
Any time, flash does not fire.
c SLOW SYNCHRO,
n RED EYE & SLOW
List of available flash modes in each Photography mode
AUTO
b
d
C
B
✓
✓
✓
✓
s
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
c
n
✓
✓
✓
✓
✓
✓
✓
CAUTION
In bright scenes, overexposure may occur.
H
✓
.
✓
✓
,
✓
✓
✓
✓
/
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Advanced Features — Photography
This mode allows you to take pictures of people at night
that clearly show both your subjects and the night time
backdrop. To prevent camera shake, always use a tripod.
Using n synchronizes Red-eye reduction mode.
Using / selects slow shutter speeds of up to 3 seconds.
CHECK
✓
✓
✓
✓
✓
Continued Q
59
d Setting the Flash (Intelligent Flash)
CHECK
Effective flash range (S : AUTO)
Wide-angle:
Approx. 60 cm to 6.5 m (2.0 ft. to 21.3 ft.)
Telephoto:
Approx. 60 cm to 3.5 m (2.0 ft. to 11.5 ft.)
If you take pictures outside of the effective flash range,
the image may appear dark even if the flash is used.
CAUTION Notes on using flash
• If pressing the shutter button while the flash is charging
(indicator lamp blinking orange), the picture will be
taken without the flash (when using AUTO and b).
• The flash charging time may increase when the battery
is low on charge.
• When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
• The flash fires several times (pre-flashes and the main
flash). Do not move the camera until the picture is
taken.
60
* Self-Timer
The self-timer is used in situations where the
photographer is included in the shot.
Available Photography modes: All
Setting self-timer
The last displayed setting is
the selected mode.
OFF
: The picture is taken after
10 seconds.
1 / 24 / 2007
10:00 AM
(: The picture is taken after
2 seconds.
1
Press the shutter button down halfway to
focus on the subject and press the shutter
button fully.
Double
beep
Halfway pressed
Beep
Fully pressed
Pressing the shutter button down halfway that focuses
on the subject.
Without releasing the shutter button, press the button
all the way down (fully pressed) to start the self-timer.
Advanced Features — Photography
The self-timer setting changes each time you press *
(o).
Taking pictures using self-timer
Continued Q
61
* Self-Timer
2
Take pictures in selected time.
A picture is taken after the self-timer lamp changes
from lit to blinking (only blinks with the 2-second selftimer).
Using the 2-second self-timer
This is useful when you worry about camera shake even if
attaching the camera on a tripod.
MEMO
• To stop the self-timer, once it has started running, press
DISP/BACK.
• Any of the following cancels the self-timer setting:
- Completing the shooting
- Changing the Photography mode setting
- Setting the camera to Playback mode
- Turning the camera off
• Take care not to stand in front of the lens when pressing
the shutter button as this can prevent the correct focus
or brightness (exposure) from being achieved.
A countdown appears on the
LCD monitor indicating the
time remaining until the
picture is taken.
62
Taking pictures with the selftimer and Intelligent Face
Detection function
Available Photography modes: B,
/
(H,
,
,
,
,
), s
,
,
2
To activate Intelligent Face Detection press
once. To turn Intelligent Face Detection
off, press
again.
3
Press the shutter button all the way down
(fully pressed).
,
1
Set the self-timer.
The self-timer setting changes each time you press *
(o).
Advanced Features — Photography
Intelligent Face Detection
The Intelligent Face Detection function is especially
useful when using the self timer since it ensures that
faces will appear in focus automatically.
Continued Q
The last displayed setting is
the selected mode.
: The picture is taken after
10 seconds.
1 / 24 / 2007
10:00 AM
(: The picture is taken after 2
seconds.
63
* Self-Timer
4
Take pictures in selected time.
During the timer countdown, the camera detects
people’s faces. Just as the picture is taken, the
camera focuses on and adjusts the brightness of
people’s faces.
A picture is taken after the self-timer lamp changes
from lit to blinking (only blinks with the 2-second selftimer).
9
64
A countdown appears on the
LCD monitor indicating the
time remaining until the
picture is taken.
CHECK
See p.32 for Intelligent Face Detection.
CAUTION
Do not move, even after countdown has completed. Wait
until the picture has been taken completely.
j Increasing Monitor Brightness
Use this function to increase the brightness of the LCD
monitor temporarily when you have difficulty seeing the
monitor in low-light conditions or in daylight.
Increasing the LCD monitor
brightness
blinks on the LCD monitor
when the function is on.
1 / 24 / 2007
• This function is automatically canceled after each shot.
• This function is purely for checking the composition of
your shot. It does not increase the brightness of the
image.
• Even if you increase the brightness in low-light
conditions, you cannot check the subject.
Advanced Features — Photography
Press j (n) to display the LCD monitor brightly.
Press j (n) again to return to normal LCD monitor
brightness.
MEMO
10:00 AM
CAUTION
Increasing Monitor Brightness cannot be set when
POWER MANAGEMENT (➝p.69) in the p-MODE
MENU is set for
CLEAR DISPLAY.
65
Using p-MODE MENU (Photography)/SHOOTING MENU
Use these menus to adjust image quality or focus. You
can take pictures in a wide range of conditions.
Setting the p-MODE MENU
(Photography)
MODE MENU
POWER MANAGEMENT
F
6
ISO
N
12FRAMES
12FRAMES
QUALITY
12
25
40
200
Setting the SHOOTING MENU
SHOOTING MENU
EXP. COMPENSATION
PHOTOMETRY
MULTI
WHITE BALANCE
AUTO
SPOT
OFF
CONTINUOUS
AVERAGE
AF MODE
SET - UP
A Press MENU/OK to open the SHOOTING
MENU.
B Press n or o to select the menu.
A Press p to open the p-MODE MENU.
C Press q.
B Press n or o to select the menu.
D Press n or o to change the setting.
C Press q.
E Press MENU/OK to confirm the setting.
D Press n or o to change the setting.
E Press MENU/OK to confirm the setting.
66
Z List of p-MODE MENU options
Menu
POWER
MANAGEMENT
QUALITY
(➝p.71)
FinePix COLOR
(➝p.72)
Sets the camera performance.
Use this setting to save power or to increase the focusing speed for
shooting.
Settings
/
/
Specifies required sensitivity setting of the ambient light around the subject. AUTO/AUTO(1600)/
The larger value of the sensitivity, the higher sensitivity is obtained. The
AUTO(800)/
higher sensitivity settings will allow you to take pictures in darker locations. AUTO(400)/1600/
800/400/200/100
Specifies the image size.
The larger image size, the better image quality is obtained. The smaller
image size, the larger number of images are recorded.
FinePix F40fd /
FinePix F45fd
iF/iN/%/
4/2/`
FinePix F47fd
F/
N/%/[/
3/2/`
Specifies required color tone.
STD/
This mode is effective for taking more vivid shots or black and white shots.
Factory
default
/
–
iN
N
Advanced Features — Photography
S ISO
(➝p.70)
Functions
STD
Continued Q
67
Using p-MODE MENU (Photography)/SHOOTING MENU
Z List of SHOOTING MENU options
Menu
Functions
Settings
This setting can be used when the Mode dial is set to
/
.
H/,/./// / /
SCENE POSITION
Use this setting to provide the best photography menu setting for the scene
/ / / / / /
(➝p.51)
being shot.
S EXP.
COMPENSATION
(➝p.73)
PHOTOMETRY
(➝p.74)
This setting can be used when the Mode dial is set to s.
Use this setting to specify the light metering method.
–2 EV to +2 EV
(1/3 EV increments)
/
This setting can be used when the Mode dial is set to s.
Use this setting to adjust the color balance to suit the color of the ambient
light around the subject.
AUTO/]/6/7/9/
0/-/8
CONTINUOUS
(➝p.76)
This setting can be used when the Mode dial is set to anything other than
.
Use this setting to select the required Continuous shooting mode.
OFF/f/k/h
This setting can be used when the Mode dial is set to s.
Use this setting to specify the focusing mode.
/
:H
:,
±0
/
T WHITE BALANCE
(➝p.75)
H AF MODE
(➝p.79)
68
This setting can be used when the Mode dial is set to s.
Use this setting to specify the light metering method.
Factory
default
/
AUTO
OFF
p-MODE MENU (Photography)
Setting the camera performance
( POWER MANAGEMENT)
Use this function to save power and increase the life of the
battery, or to increase the focusing speed for shooting.
CAUTION
POWER SAVE
To save power, the LCD monitor display will automatically
go dark when no operation is made for 10 seconds. Also,
the number of displayed frames per second will be
minimized.
CAUTION
• When Intelligent Face Detection function (➝p.32) is
ON,
POWER SAVE will be cancelled.
• Select
POWER SAVE when using continuously for
long periods in a hot place. If using in other modes
continuously for long periods in a hot place, vertical
linear noise may appear in the image by the nature of
CCD.
QUICK AF
When the shutter button is pressed halfway, the focusing
speed will be increased. This function allows you to shoot
pictures quickly and is effective when you do not want to
miss the chance to shoot. The Intelligent Face Detection
function (➝p.32) will automatically turn ON in various
shooting modes. The images will be displayed finely on
the LCD monitor, however the camera consumes more
power.
MEMO
• The focal range is approximately 1m (3.2 feet) to
infinity.
• The LCD monitor display will go dark when no operation
is made for 30 seconds, and will light up when any
buttons are pressed.
• When AUTO POWER OFF is set to OFF, the setting will
be changed to 5MIN.
Advanced Features — Photography
POWER MANAGEMENT cannot be set when
shooting mode is set for ..
Setting the menu (➝p.66)
CLEAR DISPLAY
The Intelligent Face Detection function (➝p.32) will
automatically turn ON in various shooting modes. Also,
the LCD monitor display will light up. The images will be
displayed finely on the monitor. Be aware of the battery
charge, since the camera consumes more power.
MEMO
The LCD monitor display will light up when any buttons
are pressed.
MEMO
• The LCD monitor display will go dark when no operation
is made for 30 seconds, and will light up when any
buttons are pressed.
•
CLEAR DISPLAY will turn ON when using an
optional AC power adaptor.
• When AUTO POWER OFF is set to OFF, the setting will
be changed to 5MIN.
69
Setting the menu (➝p.66)
p-MODE MENU (Photography)
Changing the sensitivity setting
(S ISO)
Use this menu to specify required sensitivity setting of the
ambient light around the subject.
The larger value of the sensitivity, the higher sensitivity is
obtained. The higher sensitivity settings will allow you to
take pictures in darker locations.
CHECK
• Settings
AUTO/AUTO(1600)/AUTO(800)/AUTO(400)/1600/800/
400/200/100
Selecting AUTO/AUTO(1600)/AUTO(800)/AUTO(400)
as the sensitivity setting, the camera selects the best
sensitivity setting for the subject’s brightness.
The selected sensitivity
setting appears on the
LCD monitor when the
sensitivity setting is set
to another setting
excluding AUTO.
1 / 24 / 2007
10:00 AM
• About AUTO(1600)/AUTO(800)/AUTO(400)
AUTO(1600)/AUTO(800)/AUTO(400) can be selected
when the Mode dial is set to s. For AUTO(1600)/
AUTO(800)/AUTO(400), sensitivity is automatically set
in the same way as for AUTO, but the highest sensitivity
is limited. Select AUTO(1600)/AUTO(800)/AUTO(400)
depending on the scene.
70
MEMO
• Sensitivity is retained even when the camera is turned
off or the mode setting is changed.
• When anything other than s in the Photography mode
is selected, only AUTO can be selected for the ISO
(sensitivity) setting.
CAUTION
Although higher sensitivity settings will allow you to take
pictures in darker locations, they will also increase the
amount of speckling in your images. Choose the
sensitivity setting that best suits the conditions.
Setting the menu (➝p.66)
Changing the quality setting
(
QUALITY)
Area shot and quality setting
Area shot excluding %
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Area shot with %
AUTO
25
Quality mode
Sample uses
i F (3296 × 2472) Printing at up to 10R (25.4 × 30.5 cm/
i N (3296 × 2472) 10 × 12 in.) / A4 size/ A3 size
For better quality, select i F
% (3504 × 2336)
4 (2304 × 1728)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
2 (1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
` (640 × 480)
To use for e-mail or web site
Z Quality settings in Photography mode (FinePix
F47fd )
Quality mode
Sample uses
F (3488 × 2616) Printing at up to 10R (25.4 × 30.5 cm/
N (3488 × 2616) 10 × 12 in.) / A3 size
For better quality, select
F
% (3696 × 2464)
[ (2592 × 1944)
Printing at up to 10R (25.4 × 30.5 cm/
10 × 12 in.) / A4 size
3 (2048 × 1536)
Printing at up to 6R (15.2 × 20.3 cm/6
× 8 in.) / A5 size
2 (1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/4
× 6 in.) / A6 size
` (640 × 480)
To use for e-mail or web site
1 / 24 / 2007
10:00 AM
1 / 24 / 2007
10:00 AM
Normal shooting provides an aspect ratio of 4:3 and %
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to a Memory Card.
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes (➝p.160). The numbers
to the right of setting show the number of available
frames.
Advanced Features — Photography
Z Quality settings in Photography mode (FinePix
F40fd / FinePix F45fd)
71
Setting the menu (➝p.66)
p-MODE MENU (Photography)
Changing the FinePix COLOR
setting (
FinePix COLOR)
Use this menu to specify required color tone.
It is effective for taking vivid shots or black and white
shots.
CHECK
FinePix COLOR settings
The contrast and color saturation
STD
are set to standard.
p-STANDARD Use this mode for normal
photography.
p-CHROME
The contrast and color saturation
are set to high.
This mode is effective for taking
more vivid shots of subjects such as
scenery (blue sky and greenery)
and flowers.
p-B&W
This mode converts the colors in the
photographed image to black and
white.
When setting p-CHROME or p-B&W, the icon
appears on the LCD monitor.
CAUTION
When the Mode dial is set to
appear on the LCD monitor.
72
or
,
does not
MEMO
• The FinePix COLOR setting is retained even when the
camera is off or the mode setting is changed.
• p-CHROME may have little visible effect with some
subjects or the scene being shot. You may not be able
to see any difference on the LCD monitor.
SHOOTING MENU
Adjusting exposure
compensation
(S EXP. COMPENSATION)
Setting the menu (➝p.66)
Guide to compensation
• Backlit portraits:
+2/3 EV to +1 2/3 EV
Available Photography mode: s (➝p.56)
EXP. COMPENSATION
+2
• Very bright scenes (such as
snowfields) and highly
reflective subjects: +1 EV
+1
+0
EV
-1
-2
positive (+) compensation
negative (–) compensation
CHECK
Advanced Features — Photography
Use this menu for shots to get the correct brightness
(exposure), such as shots with extremely high contrast
between the subject and the background.
• Shots made up predominantly of sky: +1 EV
• Spotlit subjects, particularly against dark backgrounds: –2/3
EV
• Scenes with low reflectivity, such as shots of pine trees or
dark foliage: –2/3 EV
MEMO
Any of the following disables exposure
compensation:
• Using the flash in AUTO or b mode
• Shooting dark scenes in d mode
• Compensation range: –2 EV to +2 EV
(13 steps in 1/3 EV increments)
• Explanation of Terms “EV” (➝p.163)
73
Setting the menu (➝p.66)
SHOOTING MENU
Selecting light metering method
(
PHOTOMETRY)
Available Photography modes: s
(➝p.56)
(When Intelligent Face Detection is
turned OFF)
Use this setting when the correct exposure cannot be
obtained by the shooting conditions.
SHOOTING MENU
EXP. COMPENSATION
PHOTOMETRY
MULTI
WHITE BALANCE
AUTO
SPOT
OFF
CONTINUOUS
AVERAGE
AF MODE
SET - UP
) MULTI (Pattern): Light metering where the camera
assesses the scene and selects the
correct exposure.
_ SPOT
: Light metering where the exposure
is optimized for the center of the
image.
+ AVERAGE
: Light metering where an average
value for the entire image is used.
74
To use the photometry modes effectively
• MULTI
In this mode, the camera uses automatic scene recognition
to analyze the subject and provide optimum exposure in a
wide range of shooting conditions.
• SPOT
This mode is useful for subjects with strongly contrasting
light and dark areas where you want to achieve the correct
exposure for a particular feature.
• AVERAGE
The advantage of this mode is that the exposure tends not
to change for different compositions or subjects. This mode
is particularly effective for shots of people wearing black or
white clothing and shots of scenery.
Setting the menu (➝p.66)
Adjusting color balance
(T WHITE BALANCE)
Available Photography modes: s
(➝p.56)
CUSTOM WB
WHITE BALANCE
AUTO
NEW WB
NOT CHANGE
AUTO: Automatic adjustment
]
: Select the white balance be using white paper to
suit the shooting conditions.
6
: Shooting outdoors in good weather
7
: Shooting in shade
9
: Shooting under Daylight fluorescent lamps
0
: Shooting under Warm White fluorescent lamps
: Shooting under Cool White fluorescent lamps
8
: Shooting in incandescent light
CANCEL
MEMO
• The white balance setting does not affect the image
shown on the LCD monitor.
• To use the white balance set previously, press the
MENU/OK without pressing the shutter button.
Advanced Features — Photography
Adjust the color balance based on white to suit the color
of the ambient light around the subject.
] Custom white balance
A Select ] custom white balance.
B Hold a piece of white paper under the light source for
setting the white balance, so that it fills entire the LCD
monitor. Then press the shutter button to set the white
balance.
C When the correct exposure is measured,
“COMPLETED!” appears. Press MENU/OK button to
confirm the setting.
COMPLETED!
SET
CANCEL
Continued Q
75
Setting the menu (➝p.66)
SHOOTING MENU
M
N 25
ISO AUTO
AUTO(1600)
(1600)
OVER
Set the exposure
compensation again, using
a negative value (–) when
[OVER] appears and a
positive value (+) when
[UNDER] appears (➝p.73).
OVER or UNDER
Example
You can change the white balance for a photographed image
by using colored paper instead of white paper.
MEMO
• In AUTO mode, the correct white balance may not be
achieved for subjects such as close-ups of people’s
faces and pictures taken under a special light source.
Select the correct white balance for the light source.
• When the flash fires, the white balance (except for
custom white balance) setting for the flash is used.
Consequently, to achieve a particular effect, the flash
mode should be set to C Suppressed flash (➝p.58).
• The specified custom white balance is retained until it is
reset. This setting is retained even if the battery is
removed.
• The color tones may vary depending on the shooting
conditions (light source, etc.).
• After taking the picture, check the image color (white
balance).
• Explanation of Terms “White Balance” (➝p.163)
76
Taking pictures continuously
(
CONTINUOUS)
Use this mode to take pictures of a moving subject.
SHOOTING MENU
EXP. COMPENSATION
PHOTOMETRY
WHITE BALANCE
AUTO
LONG PERIOD
OFF
CONTINUOUS
FINAL 2
AF MODE
TOP 2
SET - UP
OFF
h: LONG PERIOD continuous shooting
k: FINAL 2 continuous shooting
f: TOP 2 continuous shooting
Setting the menu (➝p.66)
CAUTION
f TOP 2 continuous shooting
Available Photography modes: B, s,
/
STORING
,
,
Shooting continues as long as
holding the shutter button
down. This mode shoots up to
2 frames (max. 1.3 frames/
sec.).
MEMO
The file recording time using the continuous shooting may
increase when recording in the xD-Picture Card or
internal memory.
Advanced Features — Photography
• Number of available frames is limited depending on the
available space on the Memory Card or internal
memory.
• In TOP 2 and FINAL 2 continuous shooting mode, the
focus is determined in the first frame and cannot be
changed in mid-sequence.
• The exposure is determined in the first frame, but in
LONG PERIOD continuous shooting the exposure is
adjusted for the scene being shot.
• The speed of continuous shooting varies depending on
the shutter speed.
• The flash cannot be used as the flash mode is set to C
SUPPRESSED FLASH (➝p.58). However, when the
mode is changed back to normal photography, the flash
setting specified before continuous shooting was
selected is restored.
• For TOP 2 and FINAL 2 continuous shooting, the
results are always displayed after you shoot. Note that
pictures taken using LONG PERIOD continuous
shooting are recorded without displaying the results.
• In FINAL 2 and LONG PERIOD continuous shooting
mode, only 1 frame can be shot when using the FINAL
2 / LONG PERIOD continuous shooting mode and Selftimer mode together.
• Continuous shooting cannot be selected in
NATURAL & d.
Continued Q
77
SHOOTING MENU
Setting the menu (➝p.66)
k FINAL 2 continuous shooting
Available Photography modes: B, s,
/
h LONG PERIOD continuous shooting
,
,
Shooting continues as long as holding the shutter button
down.
This mode shoots up to 40 times (max. 1.3 frames/sec.).
The camera records the final 2 frames shot when you
release the shutter button.
Release shutter button.
Release shutter button.
All frames
2 frames
78
,
,
Shooting continues as long as holding the shutter button
down. This mode shoots up to Memory Card or internal
memory end.
Press shutter button.
Max.40 shots
Press shutter button.
Available Photography modes: B, s,
/
Setting the menu (➝p.66)
Specifying focusing mode
(H AF MODE)
Use this mode to specify focusing mode that best suits the
subject.
: CENTER
SHOOTING MENU
: MULTI
EXP. COMPENSATION
: CONTINUOUS
1 / 24 / 2007
10:00 AM
Halfway pressed
PHOTOMETRY
WHITE BALANCE
AUTO
CONTINUOUS
CENTER
AF MODE
MULTI
SET - UP
CONTINUOUS
CENTER
Advanced Features — Photography
Available Photography modes: s
(➝p.56)
(When Intelligent Face Detection is
turned OFF)
MULTI
When pressing the shutter button down halfway, the
camera recognizes any strongly contrasting subject near
the center of the LCD monitor and displays the AF frame
over subject in focus.
AF frame
The camera focuses on the center of the LCD monitor.
Use this setting when taking pictures with AF/AE lock
(➝p.33).
CAUTION
M
N 25
ISO AUTO
AUTO(1600)
(1600)
When taking pictures in Macro mode, the camera focuses
on the center of the screen.
MEMO
1 / 24 / 2007
10:00 AM
When the AF frame does not appear in the focusing
position, select
CENTER in the AF mode and use AF/
AE lock (➝p.33).
Continued Q
79
SHOOTING MENU
Setting the menu (➝p.66)
CONTINUOUS
Use this setting to take pictures of a moving subject.
The camera continues to focus on the main subject in the
AF frame.
AF frame
1 / 24 / 2007
10:00 AM
CAUTION
When using
CONTINUOUS, attention must be given
to the battery level.
The battery level (power consumption) increases when
using
CONTINUOUS. Because the camera focuses
continuously without pressing the shutter button.
80
Using p-MODE MENU (Playback)/PLAYBACK MENU
Use these menus to play back photographed images.
Setting the p-MODE MENU
(Playback)
A Set the camera to Playback mode (➝p.37).
MODE MENU
A Set the camera to Playback mode (➝p.37).
PLAYBACK MENU
ERASE
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO
TRIMMING
B Press MENU/OK to open the PLAYBACK
MENU.
B Press p to open the p-MODE MENU.
C Press n or o to select the menu.
C Press n or o to select the menu.
D Press q.
D Press q.
E Press n or o to change the setting.
E Press n or o to change the setting.
F Press MENU/OK to confirm the setting.
Advanced Features — Playback
IR COMMUNICATION
SLIDE SHOW
PRINT ORDER (DPOF)
Setting the PLAYBACK MENU
F Press MENU/OK to confirm the setting.
81
p-MODE MENU (Playback)
Sending and receiving images
(
IR COMMUNICATION)
You can send photographed images to another FUJIFILM
digital camera (if it has IR Capability), other devices with
high-speed infrared transmission capability, or any other
mobile device with the IrSimple function. You can also
receive photographed images from a FUJIFILM digital
camera, another device with high-speed infrared
transmission capability, or another mobile device with the
IrSimpleShot™ (IrSS™) function.
MODE MENU
Setting the menu (➝p.81)
Sending image data
Sending image data to a FUJIFILM digital camera is
shown as an example here. You can send the data to
another device in the same way.
IR COMMUNICATION
TRANSMIT
CANCEL
RECEIVE
A Turn the camera on.
IR COMMUNICATION
SLIDE SHOW
PRINT ORDER (DPOF)
B Press p or q to select the sending frame
(file).
A Press w to set the camera to Playback
mode (➝p.37).
B Press p to open the p-MODE MENU.
C Press n or o to select
COMMUNICATION.
D Press p.
82
IR
(Angle: up to 15°)
C Point the camera’s infrared port towards the front of the
camera’s infrared port (➝p.13). Transmission distance
is about 5 to 20 cm (2 to 7.9 in.) within approx. 15°.
Setting the menu (➝p.81)
Receiving the image data
IR COMMUNICATION
CONNECTING
Receiving the image data from a FUJIFILM digital camera
is shown as an example here. You can receive data from
another device in the same way.
IR COMMUNICATION
CANCEL
TRANSMIT
CANCEL
RECEIVE
A Turn the camera on.
CAUTION
• Check that your camera is turned on when transmitting
the image data.
• Movie images cannot be transmitted.
• Images photographed with a camera
other than
FinePix F40fd / FinePix F45fd / FinePix F47fd may not
be printed or transmitted.
B Press p or q to select the sending frame
(file).
Advanced Features — Playback
D Press p to begin transmission.
When transmission is completed,
“TRANSMISSION COMPLETED” will
appear on the LCD monitor.
CHECK
• You can send the image data by simply pressing p
three times.
• Refer to the manual provided with the receiving device
for more information.
(Angle: up to 15°)
C Point the camera’s infrared port towards the front of the
camera’s infrared port (➝p.13). Transmission distance
is about 5 to 20 cm (2 to 7.9 in.) within approx. 15°.
Continued Q
83
p-MODE MENU (Playback)
Setting the menu (➝p.81)
CAUTION
IR COMMUNICATION
CONNECTING
CANCEL
D Press MENU/OK to begin transmission.
When transmission is completed, “DATA
RECEIVED” will appear on the LCD
monitor.
CHECK
You can receive image data by simply pressing buttons
as the order below.
p ➝ p ➝ MENU/OK
• Movie images cannot be transmitted.
• If the QUALITY of sending image data is over 3,
QUALITY of the image will be set to 3.
• If “COMMUNICATION ERROR”, “CANNOT BE
TRANSMITTED”, or “CANNOT BE RECEIVED”
appears, press p or MENU/OK to retransmit the image
data, or press DISP/BACK to cancel transmitting.
• Do not place anything between the transmitting and
receiving device.
• Leaving the camera in direct sunlight or directly under
fluorescent lighting may prevent successful data
transfer.
• Successful transfer may not be possible when
transmitting near infrared transmission devices (such
as the remote controller of TV or VCR) or devices that
generate electrical noise.
• Correctly aim the infrared port towards the front of the
device or camera’s infrared port during image data
transmission.
MEMO
When playing back an image received from another
camera,
will appear in the LCD monitor.
84
Setting the menu (➝p.81)
Setting automatic playback
(
SLIDE SHOW)
Use this mode to play back photographed images
continuously. You can select playback interval and type of
image transition.
DPOF set frame
(
PRINT ORDER (DPOF))
You can specify the image, number of prints, with or
without date of printing with a DPOF-compatible printer.
MODE MENU
MODE MENU
MEMO
• To interrupt automatic playback, press MENU/OK.
• Press p or q to advance or go back through the
images when selecting NORMAL and FADE-IN.
• The Auto power off function (➝p.113) does not operate
during slide show.
• Movie starts automatically. When the movie ends, the
playback function moves it on.
• Press DISP/BACK once during playback to display onscreen help.
• The date is displayed on the Slide Show (except
MULTIPLE) if the date is displayed on the Single-Frame
Playback.
WITH DATEE : The date will be imprinted on your
prints.
WITHOUT DATE : The date will not be imprinted on your
prints.
RESET ALL
: All DPOF settings will be canceled.
Continued Q
Advanced Features — Playback
IR COMMUNICATION
NORMAL
SLIDE SHOW
NORMAL
PRINT ORDER (DPOF)
FADE-IN
FADE-IN
MULTIPLE
CLOCK
IR COMMUNICATION
SLIDE SHOW
DATE
PRINT ORDERWITH
(DPOF)
WITHOUT DATE
RESET ALL
Intelligent Face Detection
The camera plays back the image taken with Intelligent
Face Detection (➝p.32) zoomed in on the detected face
when NORMAL
or FADE-IN
is selected.
85
p-MODE MENU (Playback)
Setting the menu (➝p.81)
Z u PRINT ORDER (DPOF)
DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications
for images shot using a digital camera on media such as a Memory Card. The recorded specifications include
information on which frames are to be printed.
This section gives a detailed description of how to order your prints with FinePix F40fd / FinePix F45fd / FinePix
F47fd.
*Some printers do not support date and time imprinting or specification of the number of prints.
*The warnings shown below may appear while specifying the prints.
“DPOF SPECIFIED. ERASE OK ?”
“DPOF SPECIFIED. ERASE ALL OK ?”
When erasing the image, the DPOF setting for that image is deleted at the same time.
“RESET DPOF OK ?” (➝p.89)
When inserting a Memory Card that contains images specified for printing by another camera, those print specifications are all reset
and replaced by the new print specifications.
[DPOF FILE ERROR] (➝p.146)
Up to 999 images can be specified on the same Memory Card.
86
Setting the menu (➝p.81)
WITH DATE / WITHOUT DATE
Selecting WITH DATEE, E appears on the LCD
monitor and the date will be imprinted on your prints.
PRINT ORDER (DPOF
DPOF)
DPOF : 00009
Total number of prints
Setting for that frame
MEMO Canceling DPOF setting
A Press p to open the p-MODE MENU and press n or
o to select
PRINT ORDER (DPOF).
B Press q.
C Press n or o to select WITH DATE E or WITHOUT
DATE and press MENU/OK to display the print order
screen.
D Press p or q to select the frame (file) with the DPOF
setting you want to cancel.
E Press o to set the number of prints to 0 (zero).
01 SHEETS
SET
A Press p or q to display the frame (file)
for specifying DPOF setting.
B Press n or o to set a value.
Up to 99 sheets are printed.
For frames (files) that you do not want
printed, set the number of prints to 0
(zero).
To cancel the DPOF setting for another frame (file),
repeat steps D and E.
Always press MENU/OK to complete the settings.
• RESET ALL (➝p.89)
Continued Q
Advanced Features — Playback
FRAME
To specify more DPOF settings, repeat steps A and B.
C Always press MENU/OK after the settings
are completed.
Pressing DISP/BACK cancels those
settings.
D Press MENU/OK again. The total number
of prints appears on the screen.
87
p-MODE MENU (Playback)
Setting the menu (➝p.81)
Intelligent Face Detection
MEMO
• When DPOF settings were specified on another
camera.
PRINT ORDER (DPOF)
DPOF
DPOF : 00000
RESET DPOF OK?
00 SHEETS
FACE COUNT
FRAME
YES
When the data includes a frame (file) with DPOF
settings that were specified on another camera,
“RESET DPOF OK?” appears.
Pressing MENU/OK erases all of the DPOF settings
already specified for each frame (file). Specify the
DPOF setting for each frame (file) again.
• Prints of up to 999 frames (files) can be ordered on the
same Memory Card.
• DPOF settings cannot be specified for movies.
CAUTION
• Pressing DISP/BACK while choosing settings will
cancel all current settings. If there were previous DPOF
settings, only the modifications are canceled.
• When selecting the WITH DATE setting, the date is
imprinted on your shots using the Print Service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some
cases).
• Images photographed with a camera
other than
FinePix F40fd / FinePix F45fd / FinePix F47fd may not
be specified DPOF settings.
88
SET
NO
When DPOF settings are set to the images taking with the
Intelligent Face Detection (➝p.32) (
appears on the
screen), press
(Intelligent Face Detection), the frame
appears around the detected face, and then the number
of the detected faces is set to print number. It is easy to
set the number of prints for each person in the picture.
Press n or o to set the print number. Press
(Intelligent Face Detection) again, the number of the
detected faces is set to the print number. After setting,
press MENU/OK.
Setting the menu (➝p.81)
RESET ALL
To cancel all DPOF settings:
RESET DPOF OK?
YES
CANCEL
Press MENU/OK.
MEMO
100 - 0001
N
ISO 100
15 / 24 / 2007
2006
1000
F2.8
Advanced Features — Playback
Select RESET ALL in the p-MODE MENU (➝p.85).
10:00 AM
u appears on the LCD monitor during playback when the
image has specified DPOF settings.
89
PLAYBACK MENU
Setting the menu (➝p.81)
Rotating the images
(
IMAGE ROTATE)
IMAGE ROTATE
When shooting in the vertical position, the image appears
horizontal on the LCD monitor.
Use this mode to rotate an image and to display correct
direction. Your camera calls images “frames”.
CAUTION
Protected frames (files) cannot be rotated. Unprotect the
frames (files) before rotating them (➝p.91).
MEMO
An image can be rotated only when playing back using
FinePix F40fd / FinePix F45fd / FinePix F47fd.
You may not be able to rotate images that were shot with
a camera
other than the FinePix F40fd / FinePix F45fd
/ FinePix F47fd.
SET
CANCEL
E Press n or o to rotate the image.
o: Rotates the image clockwise at a 90
degree angle.
n: Rotates the image counterclockwise at
a 90 degree angle.
A Press p or q to select the rotating frame
(file).
B Press MENU/OK to open the PLAYBACK
MENU.
C Press n or o to select
ROTATE.
D Press MENU/OK.
90
IMAGE
F Press MENU/OK to confirm the setting.
Next time the image is played back, it will
be automatically rotated.
Press DISP/BACK to cancel rotating the
image.
Setting the menu (➝p.81)
Intelligent Face Detection
When shooting a person in a vertical position, press
(Intelligent Face Detection) to rotate to display the correct
direction.
Protecting the images
(
PROTECT)
Use this mode to prevent frames (files) from being
accidentally erased. Your camera calls images “frames”.
FRAME SET / RESET
To protect or unprotect only the selected frame (file):
YES
UNPROTECT OK?
CANCEL
Unprotected
YES
CANCEL
Protected (F appears)
A Press p or q to select the protecting/
unprotecting frame (file).
Advanced Features — Playback
PROTECT OK?
B Press MENU/OK to protect/unprotect the
currently displayed frame (file).
Unprotected: protecting frame (file)
Protected: reset frame (file)
To protect another frame (file), repeat steps A and B.
When protecting frames (files) is completed, press DISP/
BACK.
Continued Q
91
PLAYBACK MENU
Setting the menu (➝p.81)
MEMO To stop the procedure midway
SET ALL
SET ALL OK?
IT MAY TAKE A WHILE
CANCEL
YES
CANCEL
Press MENU/OK to protect all the frames
(files).
CAUTION
RESET ALL
The Format function erases all the frames (files),
including protected frames (files) (➝p.113).
RESET ALL OK?
IT MAY TAKE A WHILE
YES
CANCEL
Press MENU/OK to unprotect all the frames
(files).
92
If the images are very large, protecting or unprotecting all
the frames (files) may take some time.
If you want to take a picture or record a movie during the
procedure, press DISP/BACK.
Setting the menu (➝p.81)
Copying the images
(V COPY)
Copying one frame at a time (FRAME)
COPY
It is possible to transfer saved images between the
internal memory and a Memory Card. Your camera calls
images “frames”.
INTERNAL MEMORY
CARD
FRAME
CARD
INTERNAL MEMORY
ALL FRAMES
Z Selecting COPY
YES
CANCEL
INTERNAL MEMORY
CARD
CARD
INTERNAL MEMORY
A Press n or o to select FRAME.
NEXT
B Press MENU/OK.
CANCEL
A Press n or o to select Y INTERNAL
MEMORY ➡ \ CARD or \ CARD ➡ Y
INTERNAL MEMORY.
C Press p or q to select the copying frame
(file).
Advanced Features — Playback
COPY
D Press MENU/OK to copy the currently
displayed frame (file).
B Press q.
MEMO
Copying the images to another Memory Card
Copy images from the Memory Card inserted in your camera
to the internal memory using the Copy Image function, then
remove that Memory Card and insert another Memory Card
into the camera. Then, copy the images to the Memory Card
from the internal memory.
To copy another frame (file), repeat steps C and D.
When copying frames (files) is completed, press DISP/
BACK.
Continued Q
93
PLAYBACK MENU
Setting the menu (➝p.81)
Copying all frames (ALL FRAMES)
COPY
INTERNAL MEMORY
CARD
FRAME
CARD
INTERNAL MEMORY
ALL FRAMES
Adding voice memos to the
images (
VOICE MEMO)
Voice memos of up to 30 seconds can be added to still
images.
Recording voice memos
YES
CANCEL
A Press n or o to select ALL FRAMES.
A Press p or q to select the image to add
a voice memo.
B Press MENU/OK to open the PLAYBACK
MENU.
B Press MENU/OK.
C Press n or o to select
C Press MENU/OK to copy all the frames
(files).
D Press q.
CAUTION
• When [\ CARD FULL] or [Y CARD FULL] appears
on the LCD monitor, copying the data stops on the way.
• When copying the image that has specified DPOF
setting, the DPOF setting is not copied.
94
VOICE MEMO.
Setting the menu (➝p.81)
REC STANDBY
START
FINISH
30s
CANCEL
REC
RECORDING
28s
To record your comment: press MENU/OK.
To rerecord the comment: press DISP/BACK.
Remaining
time
MEMO
Blinking red
• When the image already has a voice memo
If you select an image that
already has a voice memo, a
screen appears in which you
can select whether to rerecord
the memo.
PLAYBACK MENU
REC
RE - REC
ERASE
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO
TRIMMING
MEMO
Microphone
Hold the camera about 20 cm (7.9 in.) away for the best
results.
Advanced Features — Playback
F The voice memo ends when pressing
MENU/OK midway or 30 seconds pass.
E Press MENU/OK to start recording.
The remaining recording time appears during recording.
RE - REC
BACK
RE - REC
• When “PROTECTED FRAME” appears, unprotect the
frame (➝p.91).
• Voice memos cannot be added to movies.
Continued Q
95
PLAYBACK MENU
Setting the menu (➝p.81)
Z Playing back voice memos
Playing back voice memo
A Press p or q to select an image file with
a voice memo. # appears on the LCD
monitor.
B Press o to start playing back the voice
memo.
15s
STOP
The playback time appears on
the LCD monitor along with a
progress bar.
PAUSE
Control
Description
Playback
Playback begins.
The voice memo stops when
playback ends.
Pause /
Resume
Pauses the voice memo during
playback.
Press o again to resume
playback.
Stop
Stops playback.
Press p or q while voice
memo playback is stopped to go
back to the previous file or
advance to the next file
respectively.
Fast forward /
Rewind
Press p or q during playback
to skip forwards or backwards
through the voice memo.
These buttons do not function
while playback is paused.
Progress bar
CAUTION
CHECK
Speaker
Uncover the speaker.
The sound may be difficult to hear.
96
• Audio recording format:
WAVE (➝p.163), PCM recording format
• Audio file size:
Approx. 330 KB (for a 30-second voice memo)
MEMO Playing voice memo files
You may not be able to play back some voice memo files
recorded on other cameras.
Setting the menu (➝p.81)
Adjusting volume of voice memos
Volume can be adjusted while playing back voice memos.
Trimming the images
(
TRIMMING)
Use this mode to trim the required part of the
photographed image.
VOLUME
7
CHECK
Before selecting
frame (file).
SET
CANCEL
B Press n or o to adjust the volume.
C Press MENU/OK to confirm your selection.
Camera starts to play back the voice
memo.
] wide zoom switch
(Zoom out)
TRIMMING
TRIMMING
YES
[ tele zoom switch
(Zoom in)
CANCEL
YES
CANCEL
Zoom bar
Advanced Features — Playback
A Press MENU/OK while playing back voice
memo.
The voice memo is paused during
playback.
TRIMMING, select the trimming
A Press ] or [ to zoom in or
out on an image.
Continued Q
97
PLAYBACK MENU
Setting the menu (➝p.81)
MEMO
TRIMMING
Navigation screen
(Current displayed image)
YES
CANCEL
B Press n, o, p, or q to display another
part of the image.
C Press MENU/OK.
REC OK?
REC
CANCEL
D Check the saved image size and press
MENU/OK.
The trimmed image is added as a separate
file in the final frame.
98
• Pressing DISP/BACK in step A or B returns to singleframe playback.
• A saved image size varies depending on the zoom
scale of step A. For 0.3 M, k YES option appears
in yellow.
• Image sizes (FinePix F40fd / FinePix F45fd)
4
Printing at up to 6R (15.2 × 20.3 cm/6 × 8 in.) /
A5 size
2
Printing at up to 4R (10.2 × 15.2 cm/4 × 6 in.) /
A6 size
`
To use for e-mail or web site
• Image sizes (FinePix F47fd)
[
Printing at up to 10R (25.4 × 30.5 cm/10 × 12
in.) / A4 size
3
Printing at up to 6R (15.2 × 20.3 cm/6 × 8 in.) /
A5 size
2
Printing at up to 4R (10.2 × 15.2 cm/4 × 6 in.) /
A6 size
`
To use for e-mail or web site
• When % quality setting is selected, the image is
trimmed to normal size (4:3 aspect ratio).
CAUTION
You may not be able to trim images that were shot with a
camera
other than FinePix F40fd / FinePix F45fd /
FinePix F47fd.
Setting the menu (➝p.81)
Intelligent Face Detection
TRIMMING
TRIMMING
YES
CANCEL
Advanced Features — Playback
Images taken with the
Intelligent Face Detection
(➝p.32) (
appears on
the screen). Press
(Intelligent Face Detection),
the face that is focused on
is zoomed in to help crop
the main subject. To specify
a cropped part of the image
according to preference,
specify and adjust
according to the procedure
in TRIMMING.
99
r Recording Movies
Use this mode to record movies with sound.
1
Set the camera to r Movie mode.
Z Zooming the image
You must zoom beforehand as you cannot zoom during
recording.
Set the Mode dial to r.
13s
STANDBY
Zoom bar
1 / 24 / 2007
The available recording time
appears on the LCD
monitor.
1 / 24 / 2007
100
10:00 AM
10:00 AM
Press ] or [ to zoom in or out
on an image.
CHECK
• Optical zoom focal length
Approx. 36 mm to 108 mm (35 mm camera equivalent)
Max. zoom scale: 3×
• Focal range
Approx. 60 cm (2.0 ft.) to infinity
2
CHECK Recording movies
Record movies.
REC
12s
• Specifications: Motion JPEG (➝p.163), Monaural
sound
• Quality selection method: % (640 × 480 pixels)
$ (320 × 240 pixels)
• Frame rate (➝p.163): 30 frames per second (fixed)
MEMO
Fully pressed
CAUTION
Recording ends when pressing
the shutter button down
halfway during recording or the
remaining time runs out.
Halfway pressed
MEMO
• AF-assist illuminator will fire when the subject is poorly
lit.
• See p.107 for information on turning the AF-assist
illuminator off.
• There is no need to hold down the shutter button during
recording.
• Because a movie is recorded onto the Memory Card or
internal memory as it is saved, it cannot be recorded
correctly if the camera suddenly loses power (if the
battery runs out or the AC power adapter is
disconnected).
• A movie file taken by FinePix F40fd / FinePix F45fd /
FinePix F47fd may not be playable on other cameras.
• Because sound is recorded concurrently with the
images, make sure that you do not cover the
microphone with a finger, etc. (➝p.13).
• Camera operation noises may be recorded during
movie shooting.
Advanced Features — Movie
Press the shutter button down fully to start recording.
During recording, lREC and a counter that shows the
remaining time appear on the LCD monitor.
• The brightness and color of the LCD monitor shown
during movie recording may differ from those shown
before recording begins.
• Pressing the shutter button down fully fixes the focus,
however the exposure and white balance are adjusted
to the scene being shot.
• If recording is stopped immediately after it begins,
1 second of the movie is recorded onto the Memory
Card or internal memory.
101
r Recording Movies
Changing movie size
Press p to open the p-MODE MENU.
MODE MENU
QUALITY
13s
26s
MEMO
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• In r Movie mode, you cannot set the S (sensitivity)
setting and
FinePix COLOR setting.
• See p.160 for information on recording times per
Memory Card or internal memory.
CAUTION
A Press q.
B Press n or o to change the setting.
C Press MENU/OK to confirm the setting.
Z Quality settings in Movie mode
% (640 × 480 pixels): For better quality
$ (320 × 240 pixels): To record longer movies
102
If you shoot using the xD-Picture Cards with model
numbers containing “M” such as DPC-M1GB, movie
recording time may be reduced if you repeatedly record
and erase (frame erase) image files.
In such a case, erase all frames or format the xD-Picture
Card before use. Back up important frames (files) onto
your PC or another media.
w Playing Back Movies
Setting the camera to w
Playback mode (➝p.37)
Z Playing back movies
0
Control
100 - 0002
Playback
110/ 24
/ 24/ 2007
/ 2076
PLAY
10:00
11:00AM
AM
Pauses the movie during
playback.
Press o again to resume
playback.
Stop
Stops playback.
Press p or q while playback is
stopped to go back to the previous
file or advance to the next file
respectively.
Fast
forward /
Rewind
Press p or q during playback to
skip forwards or backwards
through the movie.
Skip
playback
Press p or q when the movie is
paused, the movie advances or
goes back one frame.
Hold down p or q to move
through the frames quickly.
B Press o to begin playing back movie.
STOP
PAUSE
Progress bar
The playback time appears on
the LCD monitor along with a
progress bar.
Advanced Features — Movie
Pause /
Resume
A Press p or q to select the movie file. r
appears on the LCD monitor.
30s
Description
Playback begins.
Playback stops when the end of
the movie is reached.
Continued Q
103
w Playing Back Movies
MEMO
If the subject of the shot is very bright, white vertical
streaks or black horizontal streaks may appear in the
image during playback. This is normal.
Setting the camera to w Playback mode (➝p.37)
Adjusting volume of movies
Volume can be adjusted while playing back movies.
VOLUME
CAUTION
• You may not be able to play back some movie files
recorded on other cameras.
• To play back movie files on a PC, save the movie file on
the Memory Card or internal memory to the PC’s hard
disk and then play back the saved file.
• Uncover the speaker. The sound is difficult to hear.
7
SET
CANCEL
A Press MENU/OK while playing back
movie.
The movie is paused during playback.
B Press n or o to adjust the volume.
C Press MENU/OK to confirm the setting.
Camera starts to play back the movie.
104
Memo
105
U SET-UP
Using the SET-UP menu
1
Open the SET-UP menu.
A Press MENU/OK to open the menu.
B Press n or o to select U SET-UP.
C Press q.
2
Change the page.
SET - UP
DATE / TIME
BEEP VOLUME
SHUTTER VOLUME
SHUTTER SOUND
PLAYBACK VOLUME
LCD BRIGHTNESS
3
Change the setting.
SET - UP
DATE / TIME
BEEP VOLUME
SHUTTER VOLUME
SHUTTER SOUND
PLAYBACK VOLUME
LCD BRIGHTNESS
OFF
A Press n or o to select the menu.
B Press q.
Different type of screen appears
depending on selected item.
C Press n or o to change the setting.
D Press MENU/OK to confirm the setting.
A Press p or q to select the page.
B Press o to move to menu item.
106
How to use the SET-UP menu (➝p.106)
SET-UP menu option
Setting
q
Display
Factory default
Explanation
Page
109
3 SEC/1.5 SEC/
ZOOM
(CONTINUOUS)
1.5 SEC
FRAME NO.
CONT./RENEW
CONT.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
110
AF ILLUMINATOR
ON/OFF
ON
Specifies whether the AF-assist illuminator is ON or
OFF.
35
ILLUMINATION
ON/OFF
ON
Sets whether the illumination lamp lights at startup
and after shooting is complete.
111
DIGITAL ZOOM
ON/OFF
OFF
–
–
DATE/TIME
BEEP VOLUME
SHUTTER
VOLUME
SHUTTER SOUND
/
/
/
/
Specifies whether digital zoom is used together.
111
Corrects the date or time.
26
/
Sets the volume of the tone emitted when the
camera controls are used.
–
/
Sets the volume of the sound emitted when the
shutter operates.
–
Sets the sound of the shutter emitted when the
shutter operates.
–
SOUND1/
SOUND2
PLAYBACK
VOLUME
–
7
Sets the volume of playing back movie and voice
memo.
112
LCD BRIGHTNESS
–
0
Sets the LCD monitor brightness.
112
Settings
IMAGE DISP.
Sets the way for displaying the check image screen
(photograph result) after taking a picture. The color
tones in images recorded may differ from actual
color. Play back the recorded images to check
them.
Continued Q
107
U SET-UP
How to use the SET-UP menu (➝p.106)
Setting
FORMAT
Display
–
Factory default
–
ENGLISH
Page
113
Specifies the language used for LCD monitor
display.
27
Sets the time of turning camera off when camera is
not used. OFF can be selected when POWER
MANAGEMENT is set to
POWER SAVE.
113
Specifies the time difference settings.
114
AUTO POWER
OFF
OFF/2 MIN/ 5MIN
2 MIN
TIME
DIFFERENCE
N/I
N
BACKGROUND
COLOR
–
–
Specifies the colors of menu and background.
–
VIDEO SYSTEM
NTSC/PAL
–
Specifies whether video output is set to NTSC or
PAL.
–
–
Resets all the camera settings (other than the
DATE/TIME, TIME DIFFERENCE, BACKGROUND
COLOR, and VIDEO SYSTEM) to the factory
default values set at shipment. A confirmation
message appears when you press q. To reset the
camera settings, press p or q to select OK and
press MENU/OK.
–
RESET
108
Explanation
Initializes a Memory Card or internal memory.
Select this menu to erase all the frames (files).
–
How to use the SET-UP menu (➝p.106)
C Press MENU/OK to take another
picture.
The image is recorded
automatically.
IMAGE DISP.
Use this setting to set the way for displaying the check
image screen (photograph result) after taking a picture.
3 SEC/1.5 SEC:
The image appears for about 3 or 1.5 seconds and is
then recorded.
ZOOM (CONTINUOUS):
The image appears enlarged. Use this mode to check
details of image.
CAUTION
Z Enlarging images
Navigation screen
(Current displayed image)
• When ` quality setting is selected, the image cannot
be enlarged.
• Pressing DISP/BACK cancels the zoom setting.
• This function is disabled when setting the continuous
shooting.
• This function is disabled when selecting
in
SCENE POSITION.
Intelligent Face Detection
Images taken with the Intelligent Face Detection (➝p.32).
Press
(Intelligent Face Detection) to alternate
between the displayed faces. Press ] or [ to display
the selected face zoomed in or out. Press p or q to
move to another part of the image. Press n, o, p or q
to display another part of the image.
Settings
• The color tones in images displayed when 3 SEC or 1.5
SEC is selected may differ slightly from those in the
images actually recorded.
• IMAGE DISP. cannot be used when h LONG PERIOD
(➝p.78) is set.
MEMO
Continued Q
A Press ] or [ to zoom in or out
the image.
B Press n, o, p, or q to
display another part of the
image.
109
U SET-UP
How to use the SET-UP menu (➝p.106)
CHECK
FRAME NO.
Frame number
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin
again.
<CONT.>
100 - 0001
File number
<RENEW>
A
B
* Formatted Memory Card or internal memory used for
both A and B.
CONT. : Pictures are stored beginning from the highest
file number stored on the last Memory Card or
internal memory used.
RENEW : Pictures are stored on each Memory Card
beginning with a file number 0001.
Each image will be numbered consecutively
from the last number used. So when recorded
images in the Memory Card are erased, the
number of the erased frame will not be used
again.
110
Directory number
The last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers, while
the first 3 digits show the directory number.
MEMO
• Setting this function to CONT. makes file management
easier as it makes sure that file names are not
duplicated when images are downloaded to a PC.
• When the camera settings are
RESET (➝p.108),
the frame number setting (CONT. or RENEW) is
changed to CONT. and the frame number itself does
not return to 0001.
• In CONT. setting, images are stored beginning from the
highest file number on the current Memory Card when
the Memory Card already contains image files with file
numbers higher than the highest file number on the last
Memory Card.
• The displayed frame number may differ for images
photographed on other cameras.
How to use the SET-UP menu (➝p.106)
CHECK
ILLUMINATION
Use this function to specify whether the illumination lamp
lights at startup and after shooting is complete. When
turned ON, it indicates to the subjects of the picture that
shooting is complete.
DIGITAL ZOOM
Use this function to shoot enlarged images than
maximum optical zoom scale.
AUTO
• Optical zoom focal length*
Approx. 36 mm to 108 mm
• Digital zoom focal length*
Approx. 108 mm to 745 mm
(%: Approx. 111 mm to 766 mm)
Max. zoom scale: approx. 6.9×
* 35 mm camera equivalents
MEMO
When zooming changes between optical and digital, the
position of the “ ” indicator stops. Press the same Zoom
button again to start the “ ” indicator moving again.
Zoom bar
CAUTION
Settings
Using the digital zoom allows you to enlarge your subject
and shoot it. However, it will lower your image quality. Set
the digital zoom when requiring it.
Continued Q
Z Zoom bar display
OFF
Optical zoom: 3×
ON
Optical zoom: 3×
Digital zoom:
approx. 6.9×
111
U SET-UP
How to use the SET-UP menu (➝p.106)
PLAYBACK VOLUME
LCD BRIGHTNESS
Use this function to adjust volume while playing back
movie and voice memo.
Use this function to adjust the LCD monitor brightness.
BRIGHTNESS
VOLUME
0
7
SET
SET
112
CANCEL
CANCEL
A Press n or o to adjust the volume.
The larger the number, the larger the
volume is emitted. 0 (zero) indicates a
sound deadening.
A Press n or o to adjust the LCD monitor
brightness.
The indicator moves to the + to display the
LCD monitor brightly or to the – to darken
the LCD monitor.
B Press MENU/OK to confirm the setting.
B Press MENU/OK to confirm the setting.
How to use the SET-UP menu (➝p.106)
FORMAT
AUTO POWER OFF
Initialize (format) the Memory Card or internal memory for
use with the camera.
When this function is active and the camera remains
unused for 2 or 5 minutes, it turns camera off.
Use this function when you want to get the maximum
possible running time from your battery.
FORMAT
FORMAT OK?
ERASE ALL DATA
OK
CANCEL
SET
Place of initialize
Y FORMAT:
Internal memory
\ FORMAT:
Memory Card
CAUTION
The Auto power off function is disabled during slide show
(➝p.85), and when a USB connection (➝p.118, 128) is
being used.
MEMO To restore power to the camera
A Press p or q to select OK.
Refer to “Turning On and Off” (➝p.22).
Settings
Continued Q
B Pressing MENU/OK initializes the Memory
Card or internal memory.
CAUTION
• The Format function erases all the frames (files),
including protected frames (files).
Back up important frames (files) onto your PC or
another media.
• Do not open the battery cover or expose the camera to
shock during formatting, as formatting will be
interrupted.
113
U SET-UP
How to use the SET-UP menu (➝p.106)
TIME DIFFERENCE
2
Use this function when traveling to destinations in
different time zones. This function sets a time difference
relative to the date and time currently set. When this
setting is enabled, the specified time difference is applied
when pictures are taken.
1
Move to TIME DIFFERENCE screen.
SET - UP
FORMAT
ENGLISH
AUTO POWER OFF
2 MIN
TIME DIFFERENCE
HOME
BACKGROUND COLOR
LOCAL
VIDEO SYSTEM
Use Time difference function.
SET - UP
FORMAT
ENGLISH
AUTO POWER OFF
2 MIN
TIME DIFFERENCE
HOME
BACKGROUND COLOR
LOCAL
VIDEO SYSTEM
Press n or o to change between N HOME
and I LOCAL.
To set the time difference, select I LOCAL.
N HOME: Your home time zone
I LOCAL: Your destination time zone
Press q.
3
Set time difference.
TIME DIFFERENCE
1 / 24 / 2007
10:00 AM
1 / 24 / 2007
10:00 AM
SET
CANCEL
A Press p or q to select +/–, hour, and
minute.
B Press n or o to change the setting.
C Always press MENU/OK after the settings
are completed.
114
How to use the SET-UP menu (➝p.106)
CHECK
Available time setting
–23:45 to +23:45 (in 15-minute increments)
MEMO
M
N 25
1 / 24 / 2007
11:00 AM
In the time difference
setting, when you change to
the Photography mode, I
and the date is displayed for
3 seconds, the date display
turns yellow.
CHECK
Settings
Upon returning from a trip, always change the time
difference setting back to N HOME and then check the
date and time again.
115
Using the AC power adapter (sold separately)
Always use a FUJIFILM AC Power Adapter AC-5VX (sold
separately) (➝p.135).
Use the AC power adapter to prevent losing power at
inconvenient times, such as when downloading
photographed images to your PC. You can take pictures
and play back images without worrying about depleting
the batteries.
CAUTION
• Only connect and disconnect the AC power adapter
when the camera is off. Connecting or disconnecting
the AC power adapter while the camera is on
temporarily interrupts the power supply to the camera,
which will stop the recording of any images or movies
being shot. Failing to turn the camera off before
connecting/disconnecting can also result in damage to
the xD-Picture Card, or malfunction during PC
connection.
• The socket-outlet shall be installed near the equipment
and shall be easily accessible.
• The shape of the plug and socket-outlet depends on the
country of use.
• Do not connect the AC power adapter to charge the
batteries.
DC IN 5V socket
MEMO
Check that the camera is off. Plug the AC power adapter
connector into the DC IN 5V socket and then plug the AC
power adapter into the power outlet.
116
See p.141 for notes on using the AC power adapter.
Connecting to a TV
When connecting to a TV, images can be displayed on wider screen. Using slide show function (➝p.85) together, you can have
fun with folks.
A/V OUT socket
Plug the A/V cable (included) into
the A/V OUT (Audio/Visual
output) socket of the camera.
Video (yellow)
AC-5VX
(sold separately)
To terminals
Audio (white)
Plug the other end of the cable into the
audio/video input socket on the TV.
MEMO
• Plug the A/V cable (included) and the AC power adapter
correctly and push them in each terminal.
• See p.116 for the information of the AC power adapter.
• When connecting the A/V cable (included) to TV, the
camera’s LCD monitor is turned off.
• The image quality for movie playback is lower than for
still images.
• When connecting to a TV, even if you adjust the volume
from the
PLAYBACK VOLUME, the TV volume
cannot be changed. Refer to the instructions provided
with your TV for more information on audio/video input
for your TV.
• Use the AC-5VX (sold separately) when FinePix F40fd
/ FinePix F45fd / FinePix F47fd is connected to a TV for
long periods.
• When connecting the A/V cable (included), power
management mode is automatically set to CLEAR
DISPLAY, etc.
Camera Connection
CAUTION
117
Connecting Camera Directly to Printer — PictBridge Function
When a printer that supports PictBridge is
available, images can be printed by
connecting the camera directly to the
PictBridge-compatible printer without a PC.
B Connect the camera to a printer and turn the printer on.
Press POWER to turn the camera on.
“
USB” appears on
the LCD monitor.
USB
Connecting to a printer
A Connect the camera to your printer using the USB
cable (included).
; USB
socket
C The following screen appears on the LCD monitor after
a moment.
“Specifying images for
printing”
➝p.119
“Printing with DPOF setting”
➝p.120
PICTBRIDGE
TOTAL : 00000
AC-5VX
(sold separately)
00 SHEETS
FRAME
OK
SET
MEMO
Depending on the printer, some functions are disabled.
MEMO
Use the AC-5VX (sold separately) when FinePix F40fd /
FinePix F45fd / FinePix F47fd is connected to a printer.
118
Specifying images for printing
(PRINT WITH DATE / PRINT
WITHOUT DATE)
PRINT THESE FRAMES
TOTAL : 9 SHEETS
PICTBRIDGE
TOTAL : 00002
YES
D Press MENU/OK again to download the
data to the printer and start printing the
specified number of prints.
02 SHEETS
FRAME
OK
CANCEL
SET
MEMO
A Press p or q to display the frame (file)
for specifying PRINT setting.
B Press n or o to set a value.
Up to 99 sheets are printed.
C Press MENU/OK to display the confirm
setting.
MEMO Printing with date
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
A Press DISP/BACK to
display the setting
display.
B Press n or o to select
PRINT WITH DATEE.
Camera Connection
To specify more PRINT settings, repeat steps A and B.
Even if MENU/OK is pressed with total number of images
set at 0 (zero), the screen printing once appears on the
screen. Press MENU/OK again and printing starts.
C Press MENU/OK.
CAUTION
PRINT WITH DATEE is not available when the camera
is connected to a printer that does not support date
printing.
Continued Q
119
Connecting Camera Directly to Printer — PictBridge Function
Printing with DPOF setting
(u PRINT DPOF)
PRINT DPOF OK?
TOTAL : 9 SHEETS
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
YES
CANCEL
D Press MENU/OK again to download the
data to the printer and start printing the
specified frames (files) continuously.
A Press DISP/BACK to open the menu.
B Press n or o to select u PRINT DPOF.
CHECK
To select uPRINT DPOF, the DPOF settings must be
specified on FinePix F40fd / FinePix F45fd / FinePix
F47fd beforehand (➝p.85).
CAUTION
C Press MENU/OK to display the confirm
setting.
120
Even when WITH DATEE is specified in the DPOF
settings (➝p.85), the date is not inserted on printers that
do not support date printing.
MEMO
MEMO
PRINTING
DPOF setting can be specified for images on internal
memory.
CAUTION
CANCEL
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be
canceled immediately or printing may stop midway
through.
When printing stops midway, briefly turn the camera off
and then on again.
Camera Connection
Disconnecting the printer
A Check that “PRINTING” is not displayed on the
camera’s LCD monitor.
B Turn the camera off. Unplug the USB cable (included).
• In PictBridge function, images photographed on other
than a camera may not be printed.
• The camera cannot be used to specify printer settings
such as the paper size and print quality.
• Use internal memory or a Memory Card that was
formatted on FinePix F40fd / FinePix F45fd / FinePix
F47fd.
• Movies cannot be printed.
• Images photographed with a camera other than FinePix
F40fd / FinePix F45fd / FinePix F47fd may not be
printed.
121
Installation on a Windows PC
Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Operating System*1
Windows 98 SE
Windows Millennium Edition (Windows Me)
Windows 2000 Professional*2
Windows XP Home Edition*2
Windows XP Professional*2
Windows Vista*2
CPU
200 MHz Pentium minimum
(Windows XP/Vista users: 800MHz Pentium 4 or better recommended)
RAM
128 MB minimum (512 MB minimum for Windows Vista)
Hard disk space
Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Display
800 × 600 pixels or better, 16-bit color or better
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 pixels or better)
Internet connection*3
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k or better recommended
*1 Models with one of the above operating systems pre-installed.
*2 When you install the software, login using a system administrator account (e.g. “Administrator”).
*3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
122
Z Recommended system
Operating System
Windows XP
CPU
2 GHz Pentium 4 or better recommended 3 GHz Pentium 4 or better recommended
Windows Vista
RAM
512 MB or better recommended
1 GB or better recommended
Hard disk space
2 GB or better
15 GB or better
Display
1024 × 768 pixels or better, Highest (32
bit)
1024 × 768 pixels or better, Highest (32
bit)
Internet connection
Broadband (ADSL, FTTH, CATV, etc.)
Broadband (ADSL, FTTH, CATV, etc.)
CAUTION
Software Installation
• Connect the camera directly to the PC using the USB cable (included). The software may not operate correctly when you use an
extension cable or connect the camera via a USB hub.
• When your PC has more than one USB port, the camera can be connected to either port.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
• Windows 95, Windows 98 and Windows NT cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
• When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for the FinePix Internet Service
are deleted from your PC. Click the [Register now] button, enter your registered user ID and password and download the menu
again.
123
Installation on a Windows PC
Do not connect the camera to your PC
until the software installation is
completed.
1
CHECK
For Windows Vista users:
When loading the bundled CD-ROM on your PC, the
“AutoPlay” window may appear. In this case, click
“SETUP.exe”.
When “User Account Control” window appears, click
“Allow”.
Install FinePixViewer as instructed in the
Quick start guide.
Launching the installer manually
Installing other applications
A Double-click the “My Computer” icon.
* Windows XP users should click “My Computer” in the “Start”
menu.
Windows Vista users should click “Computer” in the “Start”
menu.
B Right-click “FINEPIX” (CD-ROM drive) in the “My
Computer” window (Windows Vista users: in the
“Computer” window) and select “Open”.
C Double-click “SETUP” or “SETUP.exe” in the CD-ROM
window.
You may see messages for installing ImageMixer VCD2 LE for
FinePix. Install this application as directed by the on-screen
instructions.
2
Install DirectX as directed by the on-screen
instructions and then restart your PC. If the
latest version of DirectX is already installed
on your PC, this installation is not
performed.
CAUTION
* The way file names are displayed differs as described below
depending on your PC settings.
-File extensions (3-letter suffixes indicating the file type)
may be shown or hidden. (e.g. Setup.exe or Setup)
-Text may be shown normally or all in uppercase (e.g. Setup
or SETUP).
124
• If the latest version is already installed, this window
does not appear.
• Do not remove the CD-ROM during this procedure.
3
After restarting the PC, a message appears
stating “Installation of the FinePixViewer
has been completed”.
Installation on a Mac OS X
Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Compatible Mac*1
Power Macintosh G3*2, PowerBook G3*2,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5,
MacBook, MacBook Pro, or Mac mini
Operating System
Mac OS X (compatible with version 10.3.9 to 10.4.8)
RAM
256 MB minimum
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Display
800 × 600 pixels or better, at least 32,000 colors
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 pixels or better)
Internet connection*3
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k or better recommended
CAUTION
• Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use
an extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
Software Installation
*1 PowerPC, Intel processor loaded
*2 Models with a USB port as a standard feature
*3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
125
Installation on a Mac OS X
126
1
Turn your Macintosh on and start up Mac
OS X. Do not launch any other applications.
2
When the bundled CD-ROM is loaded into
the CD-ROM drive, the “FinePix” icon
appears. Double-click the “FinePix” icon to
open the “FinePix” volume window.
3
4
Double-click on “Installer for MacOSX”.
The Installer setup dialog appears. Click the
[Installing FinePixViewer] button.
CAUTION
For more information on what is installed, click the [Read
Me First] button and [Using FinePixViewer] button.
5
The “Authenticate” dialog appears.
Enter the name and password for the
administrator account and then click the
[OK] button.*
* The administrator account is the user account used for
Mac OS X installation and you can confirm the user
account in the Accounts dialog in the System
Preferences.
6
The “License” dialog appears. Read the
agreement carefully and then, if you agree
to the terms of the Agreement, click the
[Accept] button.
7
The “Read me” dialog appears. Click the
[Continue] button.
8
The “FinePixInstallOSX” window appears.
Click the [Install] button to install
FinePixViewer.
9
The ImageMixer VCD2 LE for FinePix
installer automatically starts up and a
window showing the installation progress
appears (Installation may take several
minutes).
10 The “FinePixViewer installation completed”
13 Select “Other...” from “When a camera is
connected, open”.
14 Select “FPVBridge” from “FinePixViewer”
folder in the “Applications” folder and click
the [Open] button.
message dialog appears. Then click exit
button and close it.
CAUTION
When Safari is used as the Web browser, a message may
be displayed and the CD-ROM may not be removed. If
this happens, click the Safari icon in the Dock to make
Safari the active application and then select “Quit Safari”
in the “Safari” menu to shut down Safari.
11 Launch “Image Capture” from the
“Applications” folder.
Select “Preferences...” from the “Image
Capture” menu.
“Image Capture” menu.
Software Installation
12 Change the Image Capture settings.
15 Select “Quit Image Capture” menu in the
127
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
MEMO
B Connect the camera to your PC using the USB cable
(included).
; USB
socket
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
Refer to Software
Installation (➝p.122, 125)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
CD-ROM
the PC before installing all
(Software for FinePix CX)
the software.
A Insert the Memory Card with images into the camera
(➝p.19).
You can use the xD-Picture Card and the SD
Memory Card with the FinePix F40fd / FinePix F45fd
/ FinePix F47fd.
In this Owner’s Manual, these cards are expressed as
“Memory Card”.
CAUTION
128
• Do not format the Memory Card in the camera on the PC.
• Use the Memory Card with images taken by a
FUJIFILM Digital camera.
• When connecting to a PC, if the Memory Card contains
large image or movie files, connection or transmission
may take time or images may not be stored. In these
cases, use the Image Memory Card Reader (sold
separately), etc. Note that the Image Memory Card
Reader DPC-R1 is not compatible with the SD Memory
Card.
AC-5VX
(sold separately)
C Press w for about 1 second to turn the
camera on in Playback mode.
CAUTION
D Set a PC.
• FinePix F40fd / FinePix F45fd / FinePix F47fd is
compatible with PTP (Picture Transfer Protocol). A
PTP-compatible camera is a camera which can
recognize the PC and printer automatically when
connected.
• Always use the FUJIFILM AC Power Adapter AC-5VX
(sold separately). If the camera suddenly loses power
during data exchange, the Memory Card or internal
memory could be damaged.
• Do not disconnect the USB cable (included) when the
camera is communicating with a PC. If disconnecting
the USB cable (included) during communication, the
files on the Memory Card or internal memory may
cause damage.
• In Mac OS X, you must set the automatic setup when
the first time you connect the camera to your PC.
• Make sure that USB cable (included) is connected
correctly and pushed in.
• Perform pre-arranged steps to disconnect and turn off
the camera (➝p.130).
• When the camera and PC are exchanging data, the
indicator lamp blinks alternately green and orange.
• Auto power off is disabled during USB connection.
• Before replacing the Memory Card, always disconnect
the camera from the PC. See p.130 for information on
the disconnection procedure.
• The camera and PC may be exchanging data even
when “Copying” disappears on your PC screen. Before
disconnecting the USB cable (included), always check
that the indicator lamp is off.
• Always use FinePixViewer to transfer images with voice
memos to a PC.
Windows 98 SE / Me / 2000 Professional /
Macintosh
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
• FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
MEMO
Software Installation
* Screen for Windows 2000 Professional
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button,
press Power to turn off the camera and then disconnect
it from the PC.
Continued Q
129
Connecting to a PC
Windows XP / Vista
A The help message appears in the bottom-right corner
of your screen. This message will close when the
settings are completed. No action is required.
CAUTION
Disconnecting the camera
1
Windows
Once the image has been saved, the window below
appears (Save Image Wizard window). To disconnect
the camera, click the [Remove] button.
This step is not required for subsequent connections.
B FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
MEMO
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button,
press POWER to turn off the camera and then
disconnect it from the PC.
Proceed to “Using FinePixViewer” (➝p.131).
130
Macintosh
Once the image has been saved, the window below
appears. To disconnect the camera, click the [OK]
button.
2
A Press POWER to turn the camera off.
Using FinePixViewer
Mastering FinePixViewer
For all information on FinePixViewer functions, refer to
“How to Use FinePixViewer” in the Help menu for details.
• What is explained in “How to Use FinePixViewer”...
“How to Use FinePixViewer” covers a range of topics,
including batch processing and ordering prints.
B Unplug the USB cable (included) from the
camera.
; USB socket
Continued Q
Software Installation
AC-5VX
(sold separately)
Example: Looking up slide shows
A Click “How to Use FinePixViewer” in the FinePixViewer
Help menu.
B Click “Basic Operation” and then click “Slide Show” in
the menu that appears.
C The “Slide Show” information appears. Press the “<<<”
key to view the previous page or the “>>>” key to view
the next page.
131
Connecting to a PC
Uninstalling the software
Only perform this operation when you no longer require
the installed software or when the software was not
installed correctly.
To remove FinePixViewer
Windows
A Check that the camera is not connected to the PC.
B Quit all currently running applications.
C Open the “My Computer” (Windows XP/Vista users
should click “Control Panel” in the “Start” menu.)
window. Then open the “Control Panel” (Windows
Vista users: open the “Programs”) and double-click on
“Add/Remove Programs” (Windows Vista users:
“Programs and Features”).
D The “Add/Remove Programs Properties” (Windows
Vista users: “Programs and Features”) window
appears. Select the software to be uninstalled
(FinePixViewer or the driver) and then click the [Add/
Remove] button (Windows Vista users: [Uninstall/
Change] button).
53
53
To remove the driver
software
E When the message appears, click the [OK] button.
Check your selection carefully since the process
cannot be canceled once you click the [OK] button.
F Automatic uninstallation begins.
When uninstallation ends, click the [OK] button.
Macintosh
Quit FinePixViewer. Then drag the installed
FinePixViewer folder to the Trash and select “Empty
Trash” in the “Finder” menu.
132
Memo
133
System Expansion Option
By using FinePix F40fd / FinePix F45fd / FinePix F47fd together with other optional FUJIFILM products, your system can be
expanded to fill a wide range of uses.
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
Z Audio/Visual
Z Image
output
TV monitor
(commercially available)
input/output to the PC
Personal Computer
(commercially available)
USB
Audio/Visual
output
Image Memory Card
Reader DPC-R1
(USB)
* This will not work with an
SD Memory Card.
Z Printing
* This will not work with an
Intel processor-loaded
Macintosh and Windows
Vista-loaded PC.
USB
SD Memory xD-Picture
Card
Card
PC Card Adapter DPC-AD
PictBridge-compatible printer
(commercially available)
(PC card slot)
* This will not work with an
SD Memory Card.
CompactFlash™
Card Adapter DPC-CF
DPC-C
F
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
for
xD-P
Printer
(commercially available)
134
icture
Card
(CF card slot)
* This will not work with an
SD Memory Card.
Accessories Guide
Visit the FUJIFILM web site for the latest information on camera accessories.
http://www.fujifilm.com/products/digital/index.html
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
• xD-Picture Card
Use the following xD-Picture Cards:
16MB/32MB/64MB/128MB/256MB/512MB/1GB/2GB
There are two types of xD-Picture Card: standard type and Type M (containing “M” in the model
number, such as DPC-M1GB).
FinePix F40fd / FinePix F45fd / FinePix F47fd is compatible with Type M, however they may no be
compatible depending on the device used (Image Memory Card Reader, etc.).
• Battery Charger BC-70
Quickly charges the rechargeable battery. The BC-70 reduces charging time to approx. 120 minutes at
+23°C.
• Rechargeable Battery NP-70 (1150 mAh)
A Lithium-ion large capacity rechargeable battery.
Continued Q
Appendices
• AC Power Adapter AC-5VX
Use the AC-5VX when taking pictures or play back images for long periods or when FinePix
F40fd / FinePix F45fd / FinePix F47fd is connected to a PC.
* The shape of the AC power adapter, the plug, and power outlet depend on the country.
135
Accessories Guide
• Image Memory Card Reader DPC-R1
The DPC-R1 provides a quick and easy way to transfer images back and forth between your PC and an
image memory card (xD-Picture Card and SmartMedia). The DPC-R1 uses the USB interface for highspeed file transfer.
-Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 4 MB to 128 MB.
This is not compatible with the SD Memory Card.
• PC Card Adapter DPC-AD
The PC Card Adapter allows the xD-Picture Card and SmartMedia to be used as a PC Card Standard
ATA-compliant (PCMCIA 2.1) PC card (Type u).
-Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 2 MB to 128 MB.
This is not compatible with the SD Memory Card.
• CompactFlash™ Card Adapter DPC-CF
Loading an xD-Picture Card into this adapter allows you to use the card as a CompactFlash card (Type
s).
-This is not compatible with the SD Memory Card.
• Waterproof Case WP-FXF40
This waterproof case protects your FinePix F40fd / FinePix F45fd / FinePix F47fd from water damage yet
allows you to make camera adjustments and use the flash.
Dive up to 40 meters (131 feet) underwater with your FinePix F40fd / FinePix F45fd / FinePix F47fd digital
camera.
136
DPCCF
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
for
xD-P
ictur
e Card
Using Your Camera Correctly
Read this information and the “Safety Notes” (➝p.171), to
make sure you use your camera correctly.
Z Places to Avoid
Do not store or use the camera in the following types of
locations:
• In the rain or in very humid, dirty, or dusty places
• In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer
• Extremely cold places
• Places with strong vibration
• Places with smoke or steam
• Places subject to strong electric magnetic fields (such
as near broadcasting tower, power lines, radar, motors,
transformers, magnets, etc.)
• In contact with chemicals such as pesticides
• Next to rubber or vinyl products
Z Damaged by Water or Sand
FinePix F40fd / FinePix F45fd / FinePix F47fd can be
damaged on the inside and outside by water and sand.
When you are at the beach or close to water, make sure
that the camera is not damaged by water or sand. Take
care not to place the camera on a wet surface.
Z Cleaning Your Camera
• Use a blower brush to remove any dust on the lens or
LCD monitor, and then gently wipe the camera with a
soft, dry cloth. If any soil remains, apply a small amount
of lens cleaning liquid to a piece of FUJIFILM lens
cleaning paper and wipe gently.
• Do not scratch hard objects against the lens or LCD
monitor.
• Clean the body of the camera with a soft, dry cloth. Do
not use volatile substances or cleaning products these
items can cause damage.
Z Using the Camera When Traveling
When traveling overseas, do not place your camera in the
check-in baggage. Baggage can be subjected to violent
shocks, and the camera may be damaged inside or
outside.
Appendices
Z Damaged by Condensation
If the camera is carried from a cold location into a warm
place, water droplets (condensation) may form on the
inside of the camera or on the lens. When this occurs, turn
the camera off and wait an hour before using the camera.
Condensation may also form on the Memory Card. In this
event, remove the Memory Card and wait a short time.
Z When the Camera is Not Used or is stored Periods
of Time
If you do not intend to use the camera for a long period of
time, remove the battery and the Memory Card.
137
Power Supply and Battery
Notes on the Battery (NP-70)
This camera uses the Rechargeable Lithium-ion Battery
NP-70. Note the points below when using the
rechargeable battery. Take particular care to read the
Safety Notes to make sure that you use the battery
correctly.
* When shipped, the NP-70 is not fully charged. Always
charge the NP-70 before using it.
• When carrying the NP-70, install it in a digital camera or
keep it in the soft case.
Z Battery Features
• The NP-70 gradually loses its charge even when not
used. Use a NP-70 that has been charged recently (in
the last day or two) to take pictures.
• To maximize the life of the NP-70, turn the camera off
as quickly as possible when it is not being used.
• The number of available frames will be lower in cold
locations or at low temperatures. Take along a spare
fully charged NP-70.
You can also increase the amount of power produced
by putting the NP-70 in your pocket or another warm
place to heat it and then loading it into the camera just
before you take a picture.
If you are using a heating pad, take care not to place the
NP-70 directly against the pad. The camera may not
operate if you use a depleted NP-70 in cold conditions.
138
Z Charging the Battery
• You can charge the battery using the battery charger
(included).
• The NP-70 can be charged at ambient temperatures
between 0°C and +40°C (+32°F and +104°F). At an
ambient temperature of +23°C (+73°F), it takes
approx. 90 minutes to charge a fully depleted NP-70
battery.
• You should charge the NP-70 at an ambient
temperature between +10°C and +35°C (+50°F and
+95°F). If you charge the NP-70 at a temperature
outside this range, charging takes longer because the
performance of the NP-70 is impaired.
• You cannot charge the NP-70 at temperatures of 0°C
(+32°F) or below.
• The NP-70 does not need to be fully discharged or
exhausted flat before being charged.
• The NP-70 may feel warm after it has been charged or
immediately after being used. This is perfectly normal.
• Do not recharge a fully charged NP-70.
Z Battery Life
At normal temperatures, the NP-70 can be used at least
300 times.
If the time for which the NP-70 provides power shortens
markedly, this indicates that the NP-70 has reached the
end of its effective life and should be replaced.
Notes on storage
The Rechargeable Lithium-ion Battery NP-70 is both
compact and capable of storing large quantities of power.
However, if it is stored for long periods while charged, the
performance of the battery can be impaired.
• If the battery will not be used for some time, run the
battery out before storing it.
• If you do not intend to use the camera for a long period
of time, remove the battery from the camera.
• Store the battery in a cool place.
* The battery should be stored in a dry location with an
ambient temperature between +15°C and +25°C (+59°F
and +77°F).
* Do not leave the battery in hot or extremely cold places.
Z Specifications of the included NP-70
Nominal voltage
DC 3.6V
Nominal capacity
1150 mAh
Operating
0°C to +40°C (+32°F to +104°F)
temperature
Dimensions
35.3 mm × 40.3 mm × 9.4 mm
(1.4 in. × 1.6 in. × 0.4 in.)
(W × H × D)
Mass (Weight)
Approx. 28 g (1.0 oz.)
Continued Q
Appendices
Z Handling the Battery
To avoid injury or damage, observe the following:
• Do not carry or store battery with metal objects such as
necklaces or hairpins.
• Do not heat the battery or throw it into a fire.
• Do not attempt to take apart or change the battery.
• Do not recharge the battery with chargers other those
specified.
• Dispose of used battery promptly.
To avoid damaging the battery or shortening its life,
observe the following:
• Do not drop the battery or otherwise subject it to strong
impacts.
• Do not expose the battery to water.
To make sure that you obtain optimum battery
performance, observe the following:
• Always keep the battery terminals clean.
• Do not store battery in warm or humid places. Storing
the battery for long periods in a hot location can shorten
the battery life.
If you use the battery for a long period, the camera
body and the battery itself will become warm. This is
normal. Use the AC power adapter supplied with the
camera if you are taking pictures or viewing images
for a long period of time.
139
Power Supply and Battery
Notes on Using the Battery Charger
Use with the following power supply cord set:
Cord: UL Listed, Type SPT-2, No.18 AWG, rated 300V,
10A, minimum 4 ft (1.2m), maximum 10 ft (3m) long.
One end terminates in a molded-on, parallel-blade, (nonpolarized) attachment plug with a 7A, 125V (NEMA 115P) configuration.
• The battery and battery charger themselves will
become warm due to the power stored inside them. This
is normal and does not indicate a fault. Wherever
possible, use the battery charger in a well-ventilated
location.
• There may be vibration noises from inside the battery
charger during use. This is normal and does not indicate
a fault.
• Do not use the battery charger to charge batteries other
than rechargeable battery NP-70.
• The battery charger could cause interference if placed
close to a radio during charging. In this event, move the
radio and charger further apart.
• Do not leave the battery charger in the following types
of locations:
• Extremely humidity or high temperatures, such as
close to a heating appliance or in direct sunlight
• Places with strong vibration
• In very dusty places
• The battery charger accepts input voltages of 100-240
V AC at 50 or 60 Hz and can be used all over the world.
However, the shape of the plug and socket-outlet
depends on the country of use. Consult your travel
agent for details.
140
Z Battery Charger BC-70 Specifications
Rated input
110-240 V AC, 50/60 Hz
Input capacity
110-240 V -0.2 A
Rated output
4.2 V DC, 800 mA
Applicable
Rechargeable Battery
batteries
NP-70
Charging time
Approx. 120 minutes
Dimensions
53 mm × 80 mm × 24 mm
(2.1 in. × 3.1 in. × 1.0 in.)
(L × W × D)
Mass (Weight)
Approx. 55 g (1.9 oz.)
(excluding batteries)
Operating
0°C to + 40°C
temperatures
(+ 32°F to + 104°F)
AC Power Adapter
Appendices
Always use the AC Power Adapter AC-5VX (sold
separately) with the camera.
The use of an AC Power adapter other than AC-5VX (sold
separately) can be damaged to your digital camera.
• Use the AC power adapter for indoor use only.
• Plug the connection cord plug securely into the DC input
terminal of the FUJIFILM Digital camera.
• Turn off the FUJIFILM Digital camera before
disconnecting the cord from the FUJIFILM Digital
camera’s DC input terminal. To disconnect, pull out the
plug gently. Do not pull on the cord.
• Do not use the AC power adapter with any device other
than your camera.
• During use, the AC power adapter will become hot to
the touch. This is normal.
• Do not take apart the AC power adapter. Doing so could
be dangerous.
• Do not use the AC power adapter in a hot and humid
place.
• Do not subject the AC power adapter to strong shocks.
• The AC power adapter may emit a humming. This is
normal.
• If used near a radio, the AC power adapter may cause
static. If this happens, move the camera away from the
radio.
141
Notes on the xD-Picture Card™, the SD Memory Card and the Internal Memory
Z Handling Memory Card
• When inserting the Memory Card into the camera, hold
the Memory Card straight as you push it in.
• Never remove the Memory Card or turn the camera off
during data recording or erasing (Memory Card
formatting) as this could be damaged to the Memory
Card.
• The use of xD-Picture Cards is recommended with
FinePix F40fd / FinePix F45fd / FinePix F47fd.
The recording quality cannot be guaranteed when xDPicture Cards other than those manufactured by
FUJIFILM are used.
• The Memory Card may feel warm when it is removed
from the camera after taking pictures. This is normal.
• Do not put labels on the Memory Card. Peeling labels
can cause the camera not to work properly.
MEMO Type M and H of xD-Picture Card
• Type M
There are two types of Memory Card: standard type and
Type M (containing “M” in the model number, such as
DPC-M2GB).
FinePix F40fd / FinePix F45fd / FinePix F47fd is
compatible with Type M.
• Type H
While Type H and M share the same compatibility.
• Usable USB drive
Type H cannot be used with xD-Picture Card USB
drive DPC-UD1, while Type M can.
142
Z Internal Memory
• Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
DVD-R, CD-R, CD-RW, hard disk, etc.).
• Data stored in the camera’s internal memory cannot be
guaranteed in the event that the camera is submitted for
repairs.
• When the camera is repaired, any data stored in the
camera’s internal memory is subject to checking by the
repairer.
Z Using Memory Card or Internal Memory with a PC
• When taking pictures using a Memory Card or internal
memory that has been used on a PC, reformat the
Memory Card using your camera.
• When formatting, a directory (folder) is created. Image
data is then recorded in this directory.
• Do not change or delete the directory (folder) or file
names on the Memory Card or internal memory
because this will make it impossible to use the Memory
Card or internal memory in your camera.
• Always use the camera to erase image data.
• To edit image data, copy or transfer the image data to
the PC and edit the copied or transferred data.
Warning Displays
The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed
(Lit red)
V (Blinking red)
|
Explanation
There is a strong likelihood of camera shake
because the shutter speed is slow.
Use flash photography. A tripod may be
recommended, depending on the scene and mode.
The AF (autofocus) cannot work effectively.
• If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
• Use AF lock to take the picture (➝p.34).
• Select Macro mode when taking close-up shots
(➝p.57).
The camera cannot shoot the picture at the correct
brightness due to too bright or dark shooting
condition.
The picture can be taken, but the correct brightness
(exposure) will not be obtained.
FOCUS ERROR
Camera malfunction or fault.
• Turn the camera on again, taking care not to touch
the lens.
• Turn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
Memory Card is not inserted when transferring
images.
Insert a Memory Card.
• The Memory Card or internal memory is not
formatted.
• The Memory Card was formatted on a PC.
• The Memory Card contact area is soiled.
• Format the Memory Card or internal memory on
the camera (➝p.113).
• Format the Memory Card on the camera.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.113). If the message still
appears, replace the Memory Card.
• Camera fault.
• Contact your FUJIFILM dealer.
ZOOM ERROR
NO CARD
CARD NOT INITIALIZED
Appendices
Load fully charged battery.
{
Aperture/
Shutter speed display
(Lit red)
Remedy
The battery is low or completely out of charge.
Continued Q
143
Warning Displays
Warning Displayed
Explanation
• The Memory Card contact area is soiled.
• The Memory Card format is incorrect.
CARD ERROR
\ CARD FULL
• Camera fault.
• Contact your FUJIFILM dealer.
• The Memory Card is damaged.
• Inserted Memory Card is not compatible with your • Insert a compatible Memory Card that is
operationchecked at FUJIFILM Corporation.
camera.
The internal memory or Memory Card is full.
Y CARD FULL
WRITE ERROR
PROTECTED CARD
Remedy
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.113). If the message still
appears, replace the Memory Card.
Erase some images in internal memory or Memory
Card (➝p.43), or use a Memory Card that has ample
free space.
• The data could not be recorded due to a Memory • Re-insert the Memory Card or turn the camera off
and then on again. If the message still appears,
Card error or a connection error between the
contact your FUJIFILM dealer.
Memory Card and camera.
• The image cannot be recorded as it is too large to • Use a new Memory Card.
fit in the available space on the Memory Card.
• Format the Memory Card or internal memory on
• The Memory Card or internal memory is not
the camera (➝p.113).
formatted.
The SD Memory Card switch is slide to the “Lock”
side.
INTERNAL MEMORY IS The data could not be recorded or copied since the
internal memory is full.
FULL
Unlock the protection by sliding it back (➝p.20).
Erase some images from the internal memory
(➝p.43), or use a Memory Card that has ample free
space.
INSERT A NEW CARD
r BUSY
The timing for recording was incorrect because the
Memory Card was formatted on a PC.
The frame number has reached 999-9999.
FRAME NO. FULL
144
Use an Memory Card that was formatted on the
camera.
A Insert a formatted Memory Card into the camera.
B Set RENEW as the FRAME NO. setting in the
U SET-UP menu (➝p.110).
C Start taking pictures (The frame number starts
from “100-0001”).
D Set CONT. as the FRAME NO. setting in the U
SET-UP menu.
Warning Displayed
Explanation
• The played back file was not recorded correctly.
• The Memory Card contact area is soiled.
READ ERROR
Remedy
• This file cannot be played back.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.113). If the message still
appears, replace the Memory Card.
• Camera fault.
• Contact your FUJIFILM dealer.
• An attempt was made to play back the image or the • The movie and image cannot be played back.
movie that was not recorded on this camera.
TOO MANY FRAMES
An attempt was made to show 5,000 or more image No more than 4,999 images can be shown by date
sorting.
by date sorting.
• An attempt was made to erase a protected file.
PROTECTED FRAME
# ERROR
\ NO IMAGE
Y NO IMAGE
` CAN NOT TRIM
• Protected files cannot be erased. Remove the
protection.
• Protected files cannot be added to voice memos.
Remove the protection.
• Protected files cannot be rotated. Remove the
protection.
• The voice memo file is faulty.
• Camera fault.
• The voice memo cannot be played back.
• Contact your FUJIFILM dealer.
An attempt was made to transfer images from the
Memory Card or internal memory that memory was
empty.
It is impossible to copy.
An attempt was made to trim a 0.3M image.
The image cannot be trimmed.
• An attempt was made to trim an image shot using The image cannot be trimmed.
a camera
other than FinePix F40fd / FinePix
F45fd / FinePix F47fd.
• The image is damaged.
Appendices
CAN NOT TRIM
• An attempt was made to add a voice memo to
protected file.
• An attempt was made to rotate a protected file.
Continued Q
145
Warning Displays
Warning Displayed
DPOF FILE ERROR
CAN NOT SET DPOF
Explanation
Remedy
Prints were specified for 1000 or more frames in the The maximum number of frames for which prints can
DPOF frame settings.
be specified on the same Memory Card is 999.
Copy the images for which you want to order prints
onto another Memory Card and then specify the
DPOF settings.
An attempt was made to specify DPOF settings for
an image that is not supported by DPOF.
DPOF printing cannot be used with this image
format.
r CAN NOT SET DPOF
CAN NOT ROTATE
r CAN NOT ROTATE
An attempt was made to rotate a movie or an image These images cannot be rotated by image formats.
shot using a camera other than FinePix F40fd /
FinePix F45fd / FinePix F47fd.
The camera is not connected to a PC or printer.
COMMUNICATION
ERROR
CANNOT BE
TRANSMITTED
• An attempt was made to send a movie or an image • The image format is not transmittable.
• A movie can not be sent.
shot by the camera other than FinePix F40fd /
FinePix F45fd / FinePix F47fd (
is displayed).
• Do not move the camera out of the transmission
• Transmission was disconnected during IR
distance. Do not place anything between the
communication.
transmitting and receiving devices.
Transmission was disconnected during IR
CANNOT BE RECEIVED communication.
Displayed for PictBridge.
PRINTER ERROR
146
• Check that the USB cable (included) is connected
correctly.
• Check that your PC or printer is turned on.
• When using infrared transmission function,
transmit the image data within the camera’s or
another device’s transmission range.
Do not move the camera out of the transmission
distance. Do not place anything between the
transmitting and receiving devices.
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Warning Displayed
Explanation
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
Displayed for PictBridge.
• Refer to the user manual for the printer being used
and check whether the printer supports the JFIFJPEG or Exif-JPEG image format. If not, the printer
cannot print the images.
• Movie images cannot be printed.
• Was the image data photographed using FinePix
F40fd / FinePix F45fd / FinePix F47fd?
You may not be able to print some images
photographed on other cameras.
PRINTER ERROR
RESUME?
CANNOT BE PRINTED
Remedy
Displayed for PictBridge.
Appendices
147
Troubleshooting
Z Getting ready
Matters
Problems
Nothing happens
when pressing
POWER.
Possible causes
Solutions
Load fully charged battery.
15,
17,
138
The battery is loaded backward.
Load the battery in the corrected direction
17
The battery cover is not closed securely.
Close the battery cover securely.
17
The camera and AC power adapter are not Connect the camera and AC power
connected correctly.
adapter correctly.
Battery and power
supply
Battery runs out
quickly.
Power cuts out
during operation.
148
Page
The battery has run out.
116
Camera is used in extremely cold
conditions.
Put the battery in your pocket or another
warm place to heat it and then load it into
the camera just before you take a picture.
15,
17,
139
The battery terminals are soiled.
Wipe the battery terminals with a clean,
dry cloth.
138
Same battery has been used for a long
period.
The battery can no longer be recharged.
Load a new battery.
15,
17,
138
The battery has run out.
Load fully charged battery.
15,
17,
138
The camera and AC power adapter are not Connect the camera and AC power
connected correctly.
adapter correctly.
116
Matters
Problems
Possible causes
Solutions
Page
The battery is loaded backward.
Load the battery in the correct direction.
17
The battery charger and connection cord
are not connected correctly.
Connect the battery charger and
connection cord correctly.
17
Take the battery out briefly and wipe the
battery terminals with a clean, dry cloth
before reloading it.
139
Load a new battery. If the battery still fails
to charge, contact your FUJIFILM dealer.
–
Solutions
Page
Charging does not The battery terminals are soiled.
Charging a battery
begin.
The battery can no longer be recharged.
Z Setting menu etc.
Matters
LCD monitor
display
Problems
Screens are not
displayed in
English.
Possible causes
A language other than English is selected Select ENGLISH.
in the
setting in the SET-UP
menu.
27
Continued Q
Troubleshooting
149
Troubleshooting
Z Shooting
Matters
Basic operations
Problems
No photograph is
taken when
pressing the
shutter button.
Possible causes
Solutions
Insert a new Memory Card or erase some
19, 43
unnecessary frames.
The Memory Card or internal memory is
not formatted.
Format the Memory Card or internal
memory on the camera.
108,
113
The Memory Card contact area is soiled.
Wipe the Memory Card contact area with a
soft, dry cloth.
19,
142
The Memory Card is damaged.
Insert a new Memory Card.
19
The battery has run out.
Load fully charged battery.
15,
17,
139
The Auto power off function has turned the Turn the camera on.
camera off.
The LCD monitor
darkens after
taking a picture.
Focusing
Camera has
difficulty in
focusing on the
subject.
You took pictures with flash.
The LCD monitor may darken for charging
flash. Wait a short time.
22
60
You took a close-up shot without selecting Select Macro mode.
Macro mode.
57
You photographed scenery with Macro
mode selected.
Cancel Macro mode.
57
You are shooting a subject that is not
suited to autofocusing (➝p.35).
Use AF/AE lock to take the picture.
You are trying to shoot a subject that is too Select Macro mode.
close with
QUICK AF function.
150
Page
The Memory Card or internal memory is
full.
Intelligent Face
Detection
Cannot set
Intelligent Face
Detection.
The Shooting mode is set to ,, ., 8,
,
,
, or
.
Change the Shooting mode.
Cannot set the
camera to Macro
(close-up) mode.
The Shooting mode is set to H, ,, .,
8,
,
,
,
, or
.
Change the Shooting mode.
Macro
34
57
49
49
Matters
Problems
Possible causes
Solutions
Page
The shutter button was pressed while the Wait until the charging is completed before
flash was charging.
pressing the shutter button.
The Shooting mode is set to
, or .
Cannot use the
flash.
Flash
, ,,
, Change the Shooting mode.
The battery has run out.
Photographed images
49
Load fully charged battery.
15,
17,
139
Continuous shooting is selected.
Set continuous shooting to OFF.
76
The flash is set to C SUPPRESSED
FLASH mode.
Set to another flash mode excluding the C
SUPPRESSED FLASH mode.
58
The flash settings are restricted because
the camera settings are tailored to the
scene being shot. Change the Shooting
mode for a wider range of flash settings.
49
The flash settings The Shooting mode is set to anything other
are restricted and than s and H.
cannot be
selected.
The playback
image is dark
even though the
flash was used.
60
The subject is too far away.
Move to within the effective flash range
before taking the picture.
Your finger was covering the flash.
Hold the camera correctly.
28
The lens is dirty.
Clean the lens.
137
{ appeared when taking pictures.
Check the focus on the subject and take
pictures.
29,
33,
143
| appeared when taking pictures.
It may cause camera shake. Hold the
camera steadily.
30,
143
The image is
blurred.
57, 60
Troubleshooting
Continued Q
151
Troubleshooting
Matters
Recording images
Continuous
shooting
152
Problems
Possible causes
Solutions
Page
AC power adapter was connected or
Photographed
disconnected during turning the camera
images or movies on.
are not recorded.
Connect or disconnect the AC power
adapter only when the camera is off.
Failing to turn the camera off first can
result in damage to the Memory Card or
malfunctions during PC connection.
140
Vertical linear
noise appears in
the images.
Turn the camera off for a while or select
POWER SAVE for POWER
MANAGEMENT.
69
Camera is used continuously in a hot
place.
Only 1 frame can A picture is taken using self-timer when
be shot even
setting FINAL 2 or LONG PERIOD
though continuous continuous shooting mode.
shooting mode
was set.
Only 1 frame can be shot when using
FINAL 2 or LONG PERIOD continuous
shooting mode and Self-timer mode
together.
76
Z Playing back
Matters
Problems
Possible causes
The camera volume is set too low.
Playing back
movie / voice
memo
The camera does
The microphone was blocked during
not emit any
shooting/recording.
sound.
There is something covering the speaker
during playback.
Erasing FRAME
Some frames may be protected.
does not erase the
frame.
Erasing
Frame No.
Solutions
Page
Adjust the volume.
97,
104,
112
Take care not to block the microphone
during shooting/recording.
13,
95,
101
Make sure that the speaker is uncovered.
Unprotect frames using the camera on
which the protection was first applied.
91
Erasing ALL
FRAMES does
not erase all the
frames.
CONT. in the
frame number
setting does not
function.
13, 96
You opened the battery cover without
Always turn the camera off when replacing
turning the camera off when replacing the the battery or Memory Card. Opening the
battery or Memory Card.
battery cover without turning the camera
off may cause the frame number memory
to not function.
22
Continued Q
Troubleshooting
153
Troubleshooting
Z Connecting
Matters
Problems
Possible causes
The camera is not connected to the TV
correctly.
Connecting to TV
The included A/V cable was connected
There is no image during movie playback.
or sound on the
“TV” is selected as the TV input.
TV.
The video output setting is incorrect.
The TV image is
black and white.
PC does not
Connecting to PC recognize the
camera.
Connecting to
printer
154
Cannot print with
PictBridge.
Solutions
Connect the camera and TV correctly.
After the movie playback mode is stopped,
connect the camera and TV correctly.
Set the TV input to “VIDEO”.
Change the setting to NTSC or PAL.
The TV volume is turned down.
Adjust the volume.
The video output setting is incorrect.
Change the setting to NTSC or PAL.
The USB cable (included) is not correctly
connected to the PC or camera.
Set up the camera, and connect the USB
cable (included) correctly.
The USB cable (included) is not correctly
connected to the printer or camera.
Set up the camera, and connect the USB
cable (included) correctly.
The printer is not turned on.
Turn the printer on.
Page
117
–
–
106,
108
–
106,
108
128
118
–
Z Others
Matters
Problems
Possible causes
Camera malfunction may be caused
temporarily.
Camera operation
etc.
Nothing happens
when pressing the
buttons on the
The battery has run out.
camera.
The camera no
longer works
correctly.
Camera malfunction may be caused
temporarily.
Solutions
Page
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again.
15,
16,
17,
116
Load fully charged battery.
15,
17,
139
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again. If you think the camera is
faulty, contact your FUJIFILM dealer.
15,
16,
17,
116
Troubleshooting
155
Specifications
System
Model
Digital camera FinePix F40fd / Digital camera
FinePix F45fd
Digital camera FinePix F47fd
Effective pixels
8.3 million pixels
9.03 million pixels
CCD
1/1.6-inch Super CCD HR
Storage media
Internal memory (approx. 25 MB)/xD-Picture Card (16/32/64/128/256/512 MB/1 GB/2 GB)/SD Memory
Card (FUJIFILM recommendation (➝p.19))
File format
Still image: DCF-compliant
Compressed: Exif ver.2.2 JPEG, DPOF-compatible
*Design rule for Camera File System compliant/DPOF compatible
Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound
Number of recorded pixels Still image: 3296 × 2472 pixels/3504 × 2336 pixels/ Still image: 3488 × 2616 pixels/3696 × 2464 pixels/
2304 × 1728 pixels/
2592 × 1944 pixels/2048 × 1536 pixels/
1600 × 1200 pixels/640 × 480 pixels
1600 × 1200 pixels/640 × 480 pixels/
(i/%/4/2/`)
(
/%/[/3/2/`)
156
File size
See the table on the p.160
Lens
Fujinon 3× optical zoom lens
F2.8-F5.1
Focal length
f=8 mm-24 mm
(Equivalent to approx. 36 mm-108 mm on a 35 mm camera)
(%: Equivalent to approx. 37mm-111 mm on a 35 mm camera)
Digital zoom
Approx. 6.9× (3× optical zoom lens is used together: Max. zoom scale: approx. 20.7×)
Aperture (Wide-angle)
F2.8 to F8 (Up to 10 steps)
Focal range
Normal:wide-angle: approx. 45 cm (1.5 ft.) to infinity
telephoto: approx. 60 cm (2.0 ft.) to infinity
Macro: wide-angle: approx. 7 cm (2.8 in.) to 80 cm (2.6 ft.)
telephoto: approx. 30 cm (1.0 ft.) to 80 cm (2.6 ft.)
System
Sensitivity
AUTO/AUTO(400)/AUTO(800)/AUTO(1600)/Equivalent to ISO 100/200/400/800/1600 (Standard output
sensitivity)
* Equivalent to ISO 100 to 2000 (varies depending on the Shooting mode)
Photometry
TTL 256-zones metering Multi, Spot, Average
Exposure control
Program AE
Scene position
(NATURAL LIGHT),
(NATURAL & d), H (PORTRAIT), , (LANDSCAPE), . (SPORT), /
(NIGHT),
(FIREWORKS),
(SUNSET),
(SNOW),
(BEACH),
(UNDERWATER),
(MUSEUM),
(PARTY),
(FLOWER),
(TEXT)
Picture Stabilization
Available
Intelligent Face Detection
Available
Exposure compensation
–2 EV to +2 EV in 1/3 EV-step increments (s)
Shutter speed
3 sec. to 1/2000 sec. (depend on Exposure mode)
FIREWORKS, you can set the shutter speed to 4 seconds or less.
* When the scene position is set to
Continuous shooting
Top-2:
Number of recorded frames: up to 2 frames
(Max. 1.3 frames/sec.)
Number of recorded frames:
Last 2 frames before releasing the shutter button
(Max. 0.9 frames/sec.)
Long-period: Number of recorded frames: Depend on memory size. 1.5 sec. interval at i N depending
on quality level.
(Max. 0.6 frames/sec.)
Final-2:
Focus
Mode: Single-AF, Continuous AF
AF system: TTL contrast-type
AF frame selection: AF (CENTER), AF (MULTI)
Continued Q
157
Specifications
System
158
White balance
Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight), Fluorescent (Warm White),
Fluorescent (Cool White), Incandescent) /Custom
Self-timer
Approx. 2 sec./10 sec.
Flash type
Auto flash
Effective range: (S: AUTO): Wide-angle: approx. 60 cm-6.5 m (2.0 ft.-21.3 ft.)
Telephoto: approx. 60 cm-3.5 m (2.0 ft.-11.5 ft.)
Macro: approx. 30 cm-80 cm (1.0 ft.-2.6 ft.)
Flash mode
Auto, Red-eye Reduction, Forced Flash, Suppressed Flash, Slow Synchro, Red-eye Reduction + Slow Synchro
LCD monitor
2.5 inches, Aspect ratio: 4:3; 230,000 pixels Amorphous silicon TFT, Approx. 100% coverage
Movie
640 × 480 pixels/320 × 240 pixels (%/$)
(30 frames per second with monaural sound)
A series of continuous image can be recorded depending on the available space on a Memory Card or
internal memory. Zoom cannot be used during movie recording.
Photography functions
Intelligent face detection, Power management, Best framing, Frame No. memory
Playback functions
Intelligent face detection, Trimming, Slide show, Multi-frame playback, Sorting by date, Image rotate,
Voice memo, Infrared communication
Other functions
PictBridge, Exif print, Language (
, Português, Nederlands,
photo mode(p-mode)
, English, Francais, Deutsch, Español, Italiano,
,
,
,
,
, Magyar, Polski, Svenska), Time difference, FinePix
Input/Output Terminal
A/V OUT (Audio/Visual
output)
NTSC/PAL-type (with monaural sound)
Digital input/output
USB 2.0 High-Speed/PTP (Picture Transfer Protocol)
DC input socket
AC Power Adapter AC-5VX (sold separately)
Power Supply and Others
Power supply
Guide to the number of
available frames for battery
operation
Rechargeable Battery NP-70
Battery Type
NP-70 (1150 mAh)
Number of frames
Approx. 300 frames
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using a battery, use the battery supplied with the camera. The storage media should be xD-Picture
Card.
Pictures should be taken at a temperature of +23°C (+73°F), with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original position
every 30 seconds, the flash used at full power every second shot and the camera turned off and then on
again once every 10 shots.
• Note: Because the number of available shots varies depending on the level of charge in the battery, the
figures shown here for the number of available shots using the battery is not guaranteed.
The number of available shots will also decline at low temperatures.
Camera dimensions (W/H/D) 95.7 mm × 59.0 mm × 23.3 mm/3.8 in. × 2.3 in. × 0.9 in. (not including accessories and attachments)
Camera mass (weight)
Approx. 145 g/5.1 oz. (not including accessories, battery and Memory Card)
Weight for photography
Approx. 175 g/6.2 oz. (including battery and Memory Card)
Operating Conditions
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Continued Q
159
Specifications
Z Standard number of available frames/recording time per xD-Picture Card, SD Memory Card and internal memory
(FinePix F40fd / FinePix F45fd)
The number of available frames, recording time or file size varies slightly depending on the subjects photographed. Note also
that the divergence between standard number of frames and the actual number of frames is greater for Memory Cards with
higher capacities.
Quality setting
Number of recorded
pixels
Image data size
iN
3296 × 2472
3.9 MB
%
4
2
3504 × 2336 2304 × 1728 1600 × 1200
980 KB
630 KB
`
%
(30 fps)
$
(30 fps)
640 × 480
640 × 480
320 × 240
130 KB
–
–
2 MB
2 MB
12
12
25
40
200
21 sec.
43 sec.
27 sec.
Internal memory
(approx. 25 MB)
6
16 MB
3
7
7
15
25
122
13 sec.
32 MB
7
15
15
31
50
247
27 sec.
54 sec.
64 MB
15
31
31
64
101
497
55 sec.
110 sec.
128 MB
31
63
63
128
204
997
111 sec.
221 sec.
256 MB
63
126
126
257
409
1997
224 sec.
7.4 min.
512 MB
127
253
253
515
818
3993
7.4 min.
14.8 min.
1 GB
255
507
507
1031
1639
7995
14.9 min.
29.6 min.
2 GB
511
1015
1015
2063
3198
15992
29.9 min.
59.2 min.
512 MB
123
245
245
498
793
3867
7.2 min.
14.3 min.
1 GB
247
491
491
999
1588
7745
14.5 min.
28.7 min.
2 GB
495
983
983
1999
3100
15501
29.0 min.
57.4 min.
xD-Picture Card
SD Memory Card
160
iF
Z Standard number of available frames/recording time per xD-Picture Card , SD Memory Card and internal memory
(FinePix F47fd)
The number of available frames, recording time or file size varies slightly depending on the subjects photographed. Note also
that the divergence between standard number of frames and the actual number of frames is greater for Memory Cards with
higher capacities.
Quality setting
Number of recorded
pixels
F
N
3488 × 2616
%
[
3
2
3696 ×
2464
2592 ×
1944
2048 ×
1536
1600 ×
1200
`
%
(30 fps)
$
(30 fps)
640 × 480 640 × 480 320 × 240
4.5 MB
2.2 MB
2.2 MB
1.2 MB
780 KB
630 KB
130 KB
–
–
Internal memory
(approx.25 MB)
5
11
11
20
32
40
200
21 sec.
43 sec.
16 MB
3
6
6
12
19
25
122
13 sec.
27 sec.
32 MB
6
13
13
25
40
50
247
27 sec.
54 sec.
64 MB
13
28
28
50
81
101
497
55 sec.
110 sec.
128 MB
28
56
56
102
162
204
997
111 sec.
221 sec.
256 MB
56
113
113
204
325
409
1997
224 sec.
7.4 min.
512 MB
113
227
227
409
651
818
3993
7.4 min.
14.8 min.
1 GB
228
456
456
819
1305
1639
7995
14.9 min.
29.6 min.
2 GB
456
913
913
1640
2558
3198
15992
29.9 min.
59.2 min.
512 MB
110
220
220
396
631
793
3867
7.2 min.
14.3 min.
1 GB
221
442
442
794
1264
1588
7745
14.5 min.
28.7 min.
2 GB
442
885
885
1589
2480
3100
15501
29.0 min.
57.4 min.
xD-Picture Card
Image data size
SD Memory Card
161
Specifications
If you shoot using the xD-Picture Cards with model numbers containing “M” such as DPC-M1GB, movie recording time may be
reduced if you repeatedly record and erase (frame erase) image files. In such a case, erase all frames or format the xD-Picture Card
before use. Back up important frames (files) onto your PC or another media.
* These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this Owner’s Manual.
* The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright
points and anomalous colors (particularly around text) may appear on the monitor. These are normal display characteristics
and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.
* The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static electricity,
line noise, etc.).
* Due to the nature of the lens, the edges of images may appear distorted. This is normal.
162
Explanation of Terms
EV
A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the film
or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes, a
digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the EV decreases
by 1.
Frame rate (fps)
The frame rate refers to the number of images (frames) that are photographed or played back per second. For example, when
10 frames are continuously photographed in a 1-second interval, the frame rate is expressed as 10 fps.
For reference, TV images are displayed at 30 fps (NTSC).
JPEG
Joint Photographic Experts Group
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss of quality in
the decompressed (restored) image.
Motion JPEG
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file are recorded
in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
Smear
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light source, such as
the sun or reflected sunlight, in the photography screen.
WAVE
A standard format used on Windows systems for saving audio data. WAVE files have the “.WAV” file extension and the data
can be saved in either compressed or uncompressed format. Uncompressed recording is used on this camera.
WAVE files can be played back on a personal computer using the following software:
Windows: MediaPlayer
Macintosh: QuickTime Player
* QuickTime 3.0 or later
White Balance
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, devices
such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of the ambient light
around the subject. This adjustment is called matching the white balance.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.
Continued Q
163
FUJIFILM Digital Camera Worldwide Network
If you have technical questions or if you need repair service, ask the following local distributor.
Please present the warranty card and your purchase receipt when you ask for repairs. Refer to the warranty card for conditions of the warranty.
There is a case that repair and Technical support cannot be accepted for some models which your local distributor does not deal with.
These lists are subject to change without notice.
NORTH AMERICA
Canada
U.S.A.
Hawaii
FUJIFILM Canada, Inc.
Technical support
Repair service
FUJIFILM U.S.A., Inc.
Technical support
Repair service
FUJIFILM Hawaii, Inc.
Technical support &
Repair service
CENTRAL & SOUTH AMERICA
Argentina
Imagen e informacion S.A.
Technical support &
Repair service
Bolivia
Reifschneider Bolivia Ltda.
Technical support &
Repair service
Brazil
FUJIFILM do Brasil Ltda.
Technical support &
Repair service
Chile
Reifschneider SA
Technical support &
Repair service
Colombia
Animex de Colombia Ltda.
Technical support &
Repair service
Ecuador
Espacri Cia Ltda
Technical support &
Repair service
164
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-866-818-FUJI (3854) http://www.fujihelp.ca
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-800-263-5018 FAX 1-905-755-2993 http://www.fujihelp.ca
1100 King George Post Rd., Edison, NJ 08837
TEL 800-800-3854 FAX 732-857-3487 digitalinfo@fujifilm.com
1100 King George Post Rd., Edison, NJ 08837
TEL 732-857-3000 FAX 732-857-3471 njcamerarepair@fujifilm.com
94-468 Akoki Street, Waipahu, HI. 96797
TEL 1-808-677-3854, ext. 209 FAX 1-808-677-1443
kurt_kmett@fujifilmhawaii.com
Fondo de la Legua 936 San Isidro Pcia. de Buenos Aires
TEL +54-11-4836-1000 FAX +54-11-4836-1144
servtec@imageneinformacion.com.ar
Calle H N.° 5 - Equipetrol Norte - Santa Cruz
TEL +591 33 44 1129 FAX +591 33 45 2919 gciagral@bibosi.scz.entelnet.bo
Av. Vereador José Diniz, 3400 - Campo Belo, Sào Paulo/SP
TEL 0800-12-8600 FAX +55 11 5091-4150 camarasdigitais@fujifilm.com.br
Av. El Conquistador del Monte 5024, Huechuraba, Santiago, Chile
TEL 02-4431500 FAX 02-4431596 ceciliacalvo@reifschneider.cl
Calle 44 N.° 13-43 Piso 2 Apartado 18001 - Bogotá
TEL +57 1 338-0299 FAX +57 1 288-2208 animex@etb.net.co
Bolivar 5-69 y Hermano Miguel
TEL 593-72-835526 FAX 593-72-833157
Ecuador
Importaciones Espacri Cia. Ltda.
Technical support &
Repair service
Simón Bolivar 5-69 y Hno. Miguel - Cuenca
TEL +593 783 5526 FAX +593 783 3157 portiz@fujifilm.com.ec
Mexico
Fujifilm de Mexico, S.A. de C.V.
Technical support
Repair service
Av. Ejercito Nacional 351, Col. Granada 11520 Mexico, D.F.
TEL (52-55) 5263-5566 / 68 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Av. Presidente Juarez 2007, Col. Tepetlacalco, 54090 Tlalnepantla, Edo. de
Mexico
TEL (52-55) 5263-5500 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Edificio Unitas 15 de Agosto 1035, Asunción
TEL +595 21 444256 FAX +595 21 444651 jmarbulo@fujifilm.com.py
Paraguay
Errece S.R.L.
Technical support &
Repair service
Peru
Procesos de Color S.A.
Technical support &
Repair service
Pablo Bermudez 111 Apartado 3794 - Esq. Arequipa - Lima 11
TEL +51 14 33 5563 FAX +51 14 33 7177 jalvarado@fujifilm.com.pe
Uruguay
Fotocamara S.R.L.
Technical support &
Repair service
Cuareim 1439, montevideo, Uruguay
TEL +598-2-9002004 FAX +598-2-9008430 fotocam@adinet.com.uy
Uruguay
Kiel S.A.
Technical support &
Repair service
Maldonado 1787 Montevideo- Uruguay
TEL (05982) 419 4542 FAX (05982) 412 0046 kiel@fujifilm.com.uy
Venezuela
C. Hellmund & Cia Sa
Technical support &
Repair service
Av. Ppal Diego Cisneros Caracas Venezuela Edf Oficentro
TEL 0212-2022300 FAX 0212-2399796 hellmund@hellmund.com
Fuji Film Oesterreich
Technical support &
Repair service
Traviatagasse/Pfarrgasse, 1230 Vienna, Austria
TEL 0043 1 6162606/51 or 52 FAX 0043 1 6162606/58
kamera.service@fujifilm.at
Belgium
Belgian Fuji Agency
Technical support &
Repair service
20, Avenue Lavoisier, Wavre, 1300, Belgium
TEL 3210242090 FAX 3210238562 info@fuji.be
Croatia
I&I d.o.o.
Technical support
Repair service
Hondlova 2, Zagreb, Croatia
TEL 38512319060 FAX 2310240 dsaravanja@fujifilm.hr
EUROPE
Austria
Hondlova 2, Zagreb, Croatia
TEL 38512316228 FAX 2310240 info@fujifilm.hr
Continued Q
165
FUJIFILM Digital Camera Worldwide Network
166
Cyprus
PMS IMAGING LTD
Technical support &
Repair service
11, Dighenis Akritas Avenue, P.O.BOX 22315, 1586 Nicosia
TEL 35722746746 FAX 35722438209 mariosashiotis@fujifilm.com.cy
Cyprus
Doros Neophytou
CAMERA REPAIRS
Technical support &
Repair service
28B, Agiou Demetriou, Acropoli, Nicosia
TEL 35722314719 FAX 35722515562 dorosn@logosnet.cy.net
Czech Republic
Fujifilm Cz., s.r.o.
Technical support
U nakladoveho nadrazi 2/1949, 130 00 Praha 3
TEL 00420 234 703 411 FAX 00420 234 703 489 fricman@fujifilm.cz
Czech Republic
AWH servis
Repair service
Milesovska 1, 130 00 Praha 3, Czech republic
TEL 00420 222 721 525 FAX 00420 222 720 122 awh@awh.cz
Denmark
Fujifilm Denmark A/S
Technical support &
Repair service
Stubbeled 2, 2950 Vedbæk Denmark
TEL 0045 45662244 FAX 0045 45662214 fujifilm@fujifilm.dk
Finland
Fuji Finland Oy
Technical support &
Repair service
Martinkyläntie 41, 01720 Vantaa, Finland
TEL +358 9 825951 FAX +358 9 870 3818 fuji@fuji.fi
France
FUJIFILM France
Technical support &
Repair service
2, Avenue Franklin, 78186 Saint-Quentin en Yvelines, France
FAX 33 1 01 30 58 58 65 direction.technique@fujifilm.fr
Germany
FUJIFILM (Europe) GmbH
Technical support &
Repair service
Greece
FUJIFILM HELLAS S.A.
Technical support &
Repair service
Heesenstr. 70, 40549 Düsseldorf
International call TEL +49 211 50890 FAX +49 211 5089668 service@fujifilm.de
National call* TEL 0180 5898980 FAX 0180 5898982
*12 Cent/Min aus dem deutschen Festnetz
1, Ihous & Ag. Anargiron str., 175 64 P.Phaliro, Athens, Greece
TEL 0030 210 9404100 FAX 0030 210 9404397 fujifilm@fujifilm.gr
Hungary
Fujifilm Hungary Ltd.
Technical support
Vaci ut 19. Budapest, 1134, Hungary
TEL 3612389410 FAX 3612389401 fujifilm@fujifilm.hu
Iceland
Icephoto (Ljosmyndavorur)
Technical support &
Repair service
Skipholt 31, 105 Reykjavik, Iceland
TEL 354 568 0450 FAX 354 568 0455 framkollun@fujifilm.is
Italy
FujiFilm Italia S.p.A.
Technical support
Repair service
Via Dell’Unione Europea, 4 - 20097 San Donato Milanese (MI), Italy
TEL 039-02895821 FAX 039-0289582912 info@fujifilm.it
Fujifilm On Line - Call center
TEL 039-026695272 info@fujifilm.it
Lithuania
Fujifilm Lithuania
Technical support &
Repair service
Gerosios Vilties str. 38, LT-03143 Vilnius, Lithuania
TEL 370-5-2130121 FAX 3705-5-2134066 info@fujifilm.lt
Malta
Ciancio (1913) Co.Ltd.
Technical support &
Repair service
Fuji Tech Centre, Ciancio House, Cannon Road, Qormi, QRM05
TEL 0356-21-480500 FAX 0356-21-488328 info@fujifilm.com.mt
Netherlands
Fujifilm Nederland BV
Technical support
Repair service
Hoogstraat 39, 3011 PE, Rotterdam, The Netherlands
TEL 010-2812345 FAX 010-2812334 fuji@fujifilm.nl
Norway
Fujifilm Norge AS
Technical support
Repair service
Poland
Portugal
Fujifilm Polska Distribution Sp. z
o.o.
Technical support
Repair service
Fujifilm Portugal, Lda
Technical support
Repair service
Romania
CTS-Cardinal Top Systems Ltd
Technical support &
Repair service
Russia
ZAO “Fujifilm RU”
Technical support
Repair service
Slovakia
Fujifilm Slovakia
Technical support
Repair service
Hoevenseweg 43, 4877 LA, Etten-Leur, The Netherlands
TEL 010-2812345 FAX 076-7502641 reparatie@fujifilm.nl
Lilleakerveien 10, 0283 Oslo, Norway
TEL 0047-22736000 FAX 0047-22736020 http://www.fujifilm.no/
mailto:post@fujifilm.no
Liaveien 1, 5132 Nyborg, Norway
TEL 0047-55393880 FAX 0047-55195201 http://www.camera.no/
mailto:service@camera.no
Poland Al..Jerozolimskie 178; 02-486 Warszawa
TEL +48-22-517-66-00 FAX +48-22-517-66-02 fujifilm@fujifilm.pl
Poland, Muszkieterow 15, 02-273 Warszawa
TEL +48-22-886-94-40 FAX +48-22-886-94-42 serwis@fujifilm.pl
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 226194213 finepix@fujifilm.pt
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 225194662 cameras@fujifilm.pt
112, Calea Dorobanti street, 4 flat, 1sector, Bucharest, Romania
TEL 4021-230-09-82 FAX 4021-230-09-82 cts_tirla@hotmail.com
Bld. 1, 10, Rozanova str., Moscow, 123007, Russia
TEL +7-095-956-9858 FAX +7-095-230-6217 info@fujifilm.ru
18, Shelepikhinskaya Naberezhnaya str., Moscow, 123290, Russia
TEL +7-095-797-3434 FAX +7-095-797-3434
Pribylinska 2, 831 04 Bratislava, Slovakia
TEL 00421 2 44 888 077 FAX 00421 2 44 889 300 fujifilm@fujifilm.sk
FIS Tatracentrum, Hodzovo nam. 4 - Tatracentrum, 811 06 Bratislava, Slovakia
TEL 00421 2 54 647 347 fis.tatracentrum@stonline.sk
Continued Q
167
FUJIFILM Digital Camera Worldwide Network
Spain
Sweden
Fujifilm España S.A.
Technical support
Repair service
Fujifilm Sverige AB
Technical support
Repair service
Switzerland /
Lichtenstein
Fujifilm (Switzerland) AG
Technical support &
Repair service
Turkey
Fujifilm Turkiye Sinfo A.S.
Technical support
Repair service
U.K.
FUJIFILM UK Ltd.
Technical support
Repair service
Ukraine
MIDDLE EAST
Iran
Israel
168
Image Ukraine CJSC
Technical support &
Repair service
Aragón 180, 08011 Barcelona (España)
TEL 902012535 FAX 934515900 / 933230330 info@fujifilm.es
Aragón 180, 08011 Barcelona (España)
TEL 934511515 FAX 934515900 / 933230330 tallersat@fujifilm.es
Sveavägen 167 104 35 Stockholm
TEL 46 8 506 141 70 FAX 46 8 506 142 09 kamera@fujifilm.se
Sveavägen 167 104 35 Stockholm
TEL 46 8 506 513 54 FAX 46 8 506513 54 kameraverkstaden@fujifilm.se
Niederhaslistrasse 12, 8157 Dietlikon, Switzerland
TEL +41 44 855 5154 FAX +41 44 855 5329 RepairCenter@fujifilm.ch
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5009 csarp@fujifilm.com.tr
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5010 servis@fujifilm.com.tr
St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 424 5383 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 421 8388 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
12, Kontraktova ploshcha, Kyiv 04070, Ukraine
TEL +380-44-4909075 FAX +380-44-4909076 d@fujifilm.ua
Tehran Fuka Co.
Technical support &
Repair service
229,“Fuji” Bldg., Mirdamad Blvd., Tehran 19189, Iran
TEL (+98-21)2254810-19 FAX (+98-21)2221002 fuka@neda.net
Shimone Group Ltd.
Technical support
Repair service
Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 digital@fujifilm.co.il
Jordan
Grand Stores
Technical support &
Repair service
Qatar
Techno Blue
Technical support
Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 FAX 972 3 9250699 khaim@shimone.com
Al- Abdali, Amman / Jordan
TEL 009626-4646387 FAX 009626-4647542 gstores@go.com.jo
Blue Salon Bldg, 3rd Floor, Suhaim bin Hamad st, Al- Saad, Doha
TEL 00974 44 66 175 FAX 00974 44 79 053 prabu@techno-blue.com
Saudi Arabia
Emam Distribution Co. Ltd.
Technical support
P.O. Box 1716, Jeddah 21441, Saudi Arabia
TEL 96626978756 FAX 96626917036 service@fujifilm.com.sa
Syria
Film Trading Company
Technical support
Repair service
Al-Shahbandar P.O. Box:31180 Damascus SYRIA
TEL + 963 11 2218049 FAX + 963 11 44673456 f.t.c@Net.SY
Al-cheikh Taha P.O. Box: 6171 Aleppo SYRIA
TEL + 963 21 4641903 FAX + 963 21 4641907 filmtradin@Net.SY
P. O. Box 2144, Saleh Bin Lahej Building, Al Garhoud, Deira, Dubai
TEL + 971-4-2823700 FAX + 971-4-2828382 photography@grandstores.ae
U.A.E.
Grand Stores
Technical support &
Repair service
Yemen
Al-Haidary Trading
Technical support
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503980 FAX 00967-1-503983
Foto Express Egypt
Technical support &
Repair service
426 Pyramids St., Giza, Egypt
TEL (202) 7762062 FAX (202) 7760169 fotoegypt@access.com.eg
Fuji Kenya Ltd
Repair service
P.O.Box 41669-00100, Fuji Plaza, Chiromo Road, Nairobi, Kenya.
TEL (254-20)4446265-8 FAX (254-20)4448515 / 7 info@fujifilm.co.ke
FUJIFILM Australia Pty Ltd
Technical support
Repair service
Locked Bag 5100, Brookvale NSW 2100
TEL 1800 226 355 FAX +61 (2) 9466 2854 digital@fujifilm.com.au
Fiji
Brijlal & Co. Ltd
Technical support &
Repair service
70-72 Cumming Street,Suva,Fiji
TEL (679)3304133 FAX (679)3302777 kapadia@connect.com.fj
New Caledonia
Phocidis SARL
Technical support &
Repair service
58, rue Higginson - B.P.661 - 98845
TEL (00 687) 25-46-35 FAX (00 687) 28-66-70 phocidis@phocidis.nc
New Zealand
Fujifilm NZ Ltd
Technical support &
Repair service
Cnr William Pickering & Bush Road Albany, Auckland
TEL +64-9-4140400 FAX +64-9-4140410 glenn.beaumont@fujifilm.co.nz
Papua New Guinea
Oceania PNG Limited
Technical support
Section 15, Allotment 1, Reke St, Boroko NCD. PNG. Mail: PO Box 2167, Boroko
NCD. PNG. TEL +675 3256411 FAX +675 3250311 oceania@daltron.com.pg
AFRICA
Egypt
Kenya
OCEANIA
Australia
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503977 FAX 00967-1-503983
169
FUJIFILM Digital Camera Worldwide Network
ASIA
Hong Kong
Fuji Photo Products Co., Ltd.
Technical support &
Repair service
8/F.,TSUEN WAN IND. CENTRE, 220 TEXACO RD., TSUEN WAN, HONG KONG
TEL (852)2406 3287 FAX (852)2408 3130 rsd@chinahkphoto.com.hk
Indonesia
PT Modern Photo Tbk
Technical support &
Repair service
Jl.Matraman Raya 12, Jakarta Timur 13150
TEL +62 021 2801000 FAX +62 021 8581620+62 021 2801012
assd_kmr@modernphoto.co.id
Malaysia
FUJIFILM (Malaysia)
Sdn. Bhd.
Technical support
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 digital@fujifilm.com.my
Philippines
24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 tech_services@yklcolor.com
10 New Industrial Road Fujifilm Building Singapore 536201
TEL 65-6380 5557 FAX 65-6281 3594 service@fujifilm.com.sg
Singapore
FUJIFILM (Singapore) Pte Ltd
Technical support &
Repair service
South Korea
Korea Fujifilm Co., Ltd.
Technical support
30-1, Mukjeung-dong, Jung-gu, Seoul, Korea
TEL +82-2-3282-7363 FAX +82-2-2269-7435 photo@fujifilm.co.kr
South Korea
Yonsan AS Center (Fujidigital)
Repair service
#301, 3F, Jeonjaland, 16-9, Hangangro3-ga, Yongsan-gu, Seoul, Korea
TEL +82-2-701-1472 FAX +82-2-718-1331 1bowl@hanmail.net
South Korea
Kangnam AS Center
(Digitalgallery)
Repair service
2F, Hyeongin Tower, 23-2, Bangyi-dong, Songpa-gu, Seoul, Korea
TEL +82-2-2203-1472 FAX +82-2-418-5572 nurijili@hanmail.net
South Korea
Busan AS Center (Digital-Sewon) 241-4, Bujeon-dong, Busanjin-gu, Busan, Korea
TEL +82-51-806-1472 FAX +82-51-817-0083 merahan@yahoo.co.kr
Repair service
No. 38, Min-Chuan E. Rd. Sec. 6, Taipei (114), Taiwan, R.O.C.
Hung Chong Corp.
TEL 886-2-6602-8988 FAX 886-2-2791-8647 dah@mail.hungchong.com.tw
Technical support &
Repair service
Taiwan
Thailand
170
YKL Development & Trdg. Corp.
Technical support
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 technical@fujifilm.com.my
24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 digital@yklcolor.com
FUJIFILM (Thailand) Ltd.
Technical support
Repair service
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext. 755 FAX +662-2730239 supaleark@fujifilm.co.th
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext.761,762 FAX +662-2730239 warin@fujifilm.co.th
Safety Notes
• Make sure that you use your FinePix F40fd / FinePix
F45fd / FinePix F47fd camera correctly. Read these
Safety Notes and your Owner’s Manual carefully before
use.
• After reading these Safety Notes, store them in a safe
place.
About the Icons
• The icons shown below are used in this document to
indicate the severity of the injury or damage that can
result if the information indicated by the icon is ignored
and the product is used incorrectly as a result.
WARNING
This icon indicates that death
or serious injury can result if
the information is ignored.
CAUTION
This icon indicates that
personal injury or material
damage can result if the
information is ignored.
The icons shown below are used to indicate the nature of
the information which is to be observed.
Triangular icons tell you that this information requires
attention (“important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an
action that must be performed (“Required”).
WARNING
If a problem arises, turn the camera off,
remove the battery, disconnect and
unplug the AC power adapter.
Continued use of the camera when it is
emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can
cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Unplug from
power socket.
Do not allow water or foreign objects to
enter the camera.
If water or foreign objects get inside the
camera, turn the camera off, remove the
battery and disconnect and unplug the AC
power adapter.
Continued use of the camera can cause a
fire or electric shock.
• Contact your FUJIFILM dealer.
Do not use the camera in the bathroom
or shower.
This can cause a fire or electric shock.
Do not use in the
bathroom or
shower.
Never attempt to change or take apart
the camera. (Never open the casing.)
Do not use the camera when it has been
dropped or the casing is damaged.
This can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not
disassemble.
171
Safety Notes
WARNING
Do not change, heat or unduly twist or
pull the connection cord and do not
place heavy objects on the connection
cord.
These actions could damage the cord and
cause a fire or electric shock.
• If the cord is damaged, contact your
FUJIFILM dealer.
Do not place the camera on an unstable
surface.
This can cause the camera to fall or tip
over and cause injury.
Never attempt to take pictures while in
motion.
Do not use the camera while you are
walking or driving a vehicle.
This can result in you falling down or being
involved in a traffic accident.
Do not touch any metal parts of the
camera during a thunderstorm.
This can cause an electric shock due to
induced current from the lightning
discharge.
Do not use the battery except as
specified.
Load the battery as aligned with the
indicator.
172
WARNING
Do not heat, change or take apart the
battery.
Do not drop or subject the battery to
impacts.
Do not store the battery with metallic
products.
Do not use chargers other than the
specified model to charge the battery.
Any of these actions can cause the battery
to burst or leak and cause fire or injury as
a result.
Use only the battery or AC power
adapters specified for use with this
camera.
Do not use voltages other than the
power supply voltage shown.
The use of other power sources can cause
a fire.
If the battery leaks and fluid gets in
contact with your eyes, skin or
clothing. Flush the affected area with
clean water and seek medical attention
or call an emergency number right
away.
Do not use the charger to charge
battery other than those specified here.
The charger is designed for NP-70
Rechargeable Battery. Using the charger
to charge conventional battery or other
types of rechargeable battery can cause
the battery to leak fluid, overheat or burst.
WARNING
When carrying the NP-70, install it in a
digital camera or keep it in the hard
case.
When storing the NP-70, keep it in the
hard case.
When discarding, cover the battery
terminals with insulation tape.
Contact with other metallic objects or
battery could cause the battery to ignite or
burst.
Keep Memory Cards out of the reach of
small children.
Because Memory Cards are small, they
can be swallowed by children. Be sure to
store Memory Cards out of the reach of
small children. If a child swallows a
Memory Card, seek medical attention or
call an emergency number.
CAUTION
Do not use this camera in locations
affected by oil fumes, steam, humidity
or dust.
This can cause a fire or electric shock.
Do not leave this camera in places
subject to extremely high
temperatures.
Do not leave the camera in locations such
as a sealed vehicle or in direct sunlight.
This can cause a fire.
Keep out of the reach of small children.
This product could cause injury in the
hands of a child.
Do not place heavy objects on the
camera.
This can cause the heavy object to tip over
or fall and cause injury.
Do not move the camera while the AC
power adapter is still connected.
Do not pull on the connection cord to
disconnect the AC power adapter.
This can damage the power cord or cables
and cause a fire or electric shock.
Do not use the AC power adapter when
the plug is damaged or the plug socket
connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the
AC power adapter in a cloth or blanket.
This can cause heat to build up and distort
the casing or cause a fire.
173
Safety Notes
CAUTION
When you are cleaning the camera or
you do not plan to use the camera for
an extended period, remove the battery
and disconnect and unplug the AC
power adapter.
Failure to do so can cause a fire or electric
shock.
When charging ends, unplug the
charger from the power socket.
Leaving the charger plugged into the
power socket can cause a fire.
Using a flash too close to a person’s
eyes may temporarily affect the
eyesight.
Take particular care when photographing
infants and young children.
When an xD-Picture Card is removed,
the card could come out of the slot too
quickly. Use your finger to hold it and
gently release the card.
Request regular internal testing and
cleaning for your camera.
Build-up of dust in your camera can cause
a fire or electric shock.
• Contact your FUJIFILM dealer to
request internal cleaning every 2 years.
• Please note this is not a free of charge
service.
174
Memo
175
Memo
176
Memo
177
Memo
178
Memo
179
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital/
Printed in China
FPT/Y-709104-PY