BL01479-200
DIGITAL CAMERA
FINEPIX F600EXR
Owner’s Manual
Thank you for your purchase
of this product. This manual
describes how to use your
FUJIFILM digital camera and the
supplied software. Be sure that
you have read and understood
its contents and the warnings in
“For Your Safety” (P ii) before using the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
EN
Before You Begin
First Steps
Basic Photography and Playback
More on Photography
More on Playback
GPS
Movies
Connections
Menus
Technical Notes
Troubleshooting
Appendix
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
• Read Instructions: All the safety and operating instructions should be read before the
appliance is operated.
• Retain Instructions: The safety and operating
instructions should be retained for future
reference.
• Heed Warnings: All warnings on the appliance and in the operating instructions
should be adhered to.
• Follow Instructions: All operating and use
instructions should be followed.
Installation
Power Sources: This video product should be
operated only from the type of power source
indicated on the marking label. If you are
not sure of the type of power supply to your
home, consult your appliance dealer or local
power company. For video products intended to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization: This video product
is equipped with a polarized alternatingcurrent line plug (a plug having one blade
wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
ii
Alternate Warnings: This video product is
equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding type plug.
Overloading: Do not overload wall outlets and
extension cords as this can result in a risk of
fire or electric shock.
Power-Cord Protection: Power-supply cords
should be routed so that they are not likely
to be walked on or pinched by items placed
upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
Accessories: Do not place this video product
on an unstable cart, stand, tripod, bracket, or
table. The video product may fall, causing
serious injury to a child or adult, and serious
damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with
the video product. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
Ventilation: Slots and openings in the cabinet
are provided for ventilation, to ensure reliable
operation of the video product and to protect it from overheating, and these openings
must not be blocked or covered. The openings should never be blocked by placing the
video product on a bed, sofa, rug, or other An appliance and cart
combination should
similar surface.
be moved with care.
This video product should not be placed in a
Quick stops, excesbuilt-in installation such as a bookcase or rack
sive force, and uneven
unless proper ventilation is provided or the
surfaces may cause
manufacturer’s instructions have been adthe appliance and cart
hered to. This video product should never be
combination to overturn.
placed near or over a radiator or heat register.
Attachments: Do not use attachments not
recommended by the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video
product near water—for example, near a
bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming
pool, and the like.
For Your Safety
Antennas
Outdoor Antenna Grounding: If an outside
antenna or cable system is connected to the
video product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and builtup static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides
information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Ground Clamp
Antenna Lead
in Wire
Electric Service
Equipment
Antenna
Discharge Unit
(NEC SECTION
810-20)
Ground Clamps
Power Service Grounding
Electrode System (NEC ART
250. PART H)
Grounding
Conductors
(NEC SECTION
810-21)
Power Lines: An outside antenna system
should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might
be fatal.
mally follow the operating instructions. Adjust only those controls that are covered by
the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the video
Object and Liquid Entry: Never push objects
product to its normal operation.
of any kind into this video product through
openings as they may touch dangerous volt- When the video product exhibits a distinct
age points or short out parts that could result change in performance—this indicates a
in a fire or electric shock. Never spill liquid of need for service.
any kind on the video product.
Replacement Parts: When replacement parts
Use
Cleaning: Unplug this video product from the
wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
Lightning: For added protection for this video
product receiver during a lightning storm, or
when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the video product due to lightning and power-line
surges.
are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or
other hazards.
Safety Check: Upon completion of any service
or repairs to this video product, ask the service technician to perform safety checks to
Service
Servicing: Do not attempt to service this video determine that the video product is in proper
product yourself as opening or removing cov- operating condition.
ers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified
service personnel.
Damage Requiring Service: Unplug this video
product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
• When the power-supply cord or plug is
damaged.
• If liquid has been spilled, or objects have
fallen into the video product.
• If the video product has been exposed to
rain or water.
• If the video product has been dropped or
the cabinet has been damaged.
If the video product does not operate nor-
iii
For Your Safety
Be sure to read these notes before use
WARNING
Safety Notes
• Make sure that you use your camera correctly. Read these safety
notes and your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incorrectly
as a result.
WARNING
CAUTION
This icon indicates that death or serious injury can result if the
information is ignored.
This icon indicates that personal injury or material damage can
result if the information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that
must be performed (“Required”).
WARNING
Unplug from
power socket
Avoid exposure
to water
iv
If a problem arises, turn the camera off, remove the battery, and
disconnect and unplug the AC power adapter. Continued use of
the camera when it is emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can cause a fire or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the camera. If water
or foreign objects get inside the camera, turn the camera off,
remove the battery, and disconnect and unplug the AC power
adapter. Continued use of the camera can cause a fire or electric shock. Contact your FUJIFILM dealer.
Do not use in
the bathroom or
shower
Do not
disassemble
Do not touch
internal parts
Do not use the camera in the bathroom or shower. This can cause
a fire or electric shock.
Never attempt to change or take apart the camera (never open
the case). Failure to observe this precaution can cause fire or
electric shock.
Should the case break open as the result of a fall or other accident,
do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the
damaged parts. Remove the battery immediately, taking care
to avoid injury or electric shock, and take the product to the
point of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and
do not place heavy objects on the connection cord. These actions
could damage the cord and cause a fire or electric shock. If the
cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This can cause the
camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion. Do not use the
camera while you are walking or driving a vehicle. This can result in you falling down or being involved in a traffic accident.
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from
the lightning discharge.
Do not use the battery except as specified. Load the battery as
shown by the indicator.
Do not heat, change or take apart the battery. Do not drop or subject
the battery to impacts. Do not store the battery with metallic products. Any of these actions can cause the battery to burst or leak
and cause fire or injury as a result.
Use only the battery or AC power adapters specified for use with this
camera. Do not use voltages other than the power supply voltage
shown. The use of other power sources can cause a fire.
If the battery leaks and fluid gets in contact with your eyes, skin or
clothing, flush the affected area with clean water and seek medical
attention or call an emergency number right away.
For Your Safety
WARNING
CAUTION
When you are cleaning the camera or you do not plan to use the
camera for an extended period, remove the battery and disconnect
and unplug the AC power adapter. Failure to do so can cause a
fire or electric shock.
Do not use the charger to charge batteries other than those specified
here. The supplied battery charger is for use only with the type
of battery supplied with the camera. Using the charger to charge
conventional batteries or other types of rechargeable batteries
can cause the battery to leak fluid, overheat or burst.
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
When carrying the battery, install it in a digital camera or keep it
in the hard case. When storing the battery, keep it in the hard case.
When discarding, cover the battery terminals with insulation tape.
Contact with other metallic objects or batteries could cause
the battery to ignite or burst.
Keep memory cards out of the reach of small children. Because
memory cards are small, they can be swallowed by children.
Be sure to store memory cards out of the reach of small children. If a child swallows a memory card, seek medical attention or call an emergency number.
CAUTION
Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This can cause a fire or electric shock.
Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed
vehicle or in direct sunlight. This can cause a fire.
Unplug from
power socket
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause
a fire.
Using a flash too close to a person’s eyes may temporarily affect the
eyesight. Take particular care when photographing infants and
young children.
When a memory card is removed, the card could come out of the slot
too quickly. Use your finger to hold it and gently release the card.
Injury could result to those struck by the ejected card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric
shock. Contact your FUJIFILM dealer to request internal cleaning every two years. Please note that this service is not free
of charge.
Remove your fingers from the flash window before the flash fires.
Failure to observe this precaution could result in burns.
Keep the flash window clean and do not use the flash if the window
is obstructed. Failure to observe these precautions could cause
smoke or discoloration.
Keep out of the reach of small children. This product could cause
injury in the hands of a child.
Do not place heavy objects on the camera. This can cause the
heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connected. Do not pull on the connection cord to disconnect the AC power
adapter. This can damage the power cord or cables and cause
a fire or electric shock.
Do not use the AC power adapter when the plug is damaged or the
plug socket connection is loose. This could cause a fire or electric
shock.
Do not cover or wrap the camera or the AC power adapter in a cloth
or blanket. This can cause heat to build up and distort the casing or cause a fire.
v
For Your Safety
■ Charging the Battery
Charge the battery in the supplied battery
charger. Charging times will increase at ambient temperatures below +10 °C (+50 °F) or
above +35 °C (+95 °F). Do not attempt to
The following describes the proper use of charge the battery at temperatures above
batteries and how to prolong their life. Incor- 40 °C (+104 °F); at temperatures below 0 °C
rect use can shorten battery life or cause leak- (+32 °F), the battery will not charge.
age, overheating, fire, or explosion.
Do not attempt to recharge a fully charged
Li-ion Batteries
battery. The battery does not however need
Read this section if your camera uses a to be fully discharged before charging.
rechargeable Li-ion battery.
The battery may be warm to the touch immeThe battery is not charged at shipment. diately after charging or use. This is normal.
Charge the battery before use. Keep the bat■ Battery Life
tery in its case when not in use.
At normal temperatures, the battery can be
■ Notes on the Battery
recharged about 300 times. A noticeable deThe battery gradually loses its charge when crease in the length of time the battery will
not in use. Charge the battery one or two hold a charge indicates that it has reached
days before use.
the end of its service life and should be reBattery life can be extended by turning the placed.
The Battery and Power Supply
Note: Check the type of battery used in
your camera and read the appropriate
sections.
■ Cautions: Handling the Battery
• Do not transport or store with metal objects
such as necklaces or hairpins.
• Do not expose to flame or heat.
• Do not disassemble or modify.
• Use with designated chargers only.
• Do not drop or subject to strong physical
shocks.
• Do not expose to water.
• Keep the terminals clean.
• The battery and camera body may become
warm to the touch after extended use. This
is normal.
AA Alkaline/Rechargeable Ni-MH Batteries
Read this section if your camera uses AA
alkaline or rechargeable AA Ni-MH batteries. Information on compatible battery
types may be found elsewhere in the camera
manual.
■ Cautions: Handling the Batteries
• Do not expose to water, flame, or heat, or
■ Storage
store in warm or humid conditions.
Battery capacity decreases at low tempera- Performance may be impaired if the battery is • Do not transport or store with metal objects
tures; a depleted battery may not function at left unused for extended periods when fully
such as necklaces or hairpins.
when cold. Keep a fully charged spare battery charged. Run the battery flat before storing it. • Do not disassemble or modify the batteries
in a warm place and exchange as necessary, If the camera will not be used for an extended
or battery casing.
or keep the battery in your pocket or other period, remove the battery and store it in a • Do not subject to strong physical shocks.
warm place and insert it in the camera only dry place with an ambient temperature of • Do not use batteries that are leaking, dewhen shooting. Do not place the battery in from +15 °C to +25 °C (+59 °F to +77 °F). Do
formed, or discolored.
direct contact with hand warmers or other not store in locations exposed to extremes of • Keep out of reach of infants and small chilheating devices.
dren.
temperature.
• Insert in the correct orientation.
camera off when not in use.
vi
For Your Safety
• Do not mix old and new batteries, batteries
with different charge levels, or batteries of
different types.
• If the camera will not be used for an extended period, remove the batteries. Note
that the camera clock will be reset.
• The batteries may be warm to the touch immediately after use. Turn the camera off and
allow the batteries to cool before handling.
• Battery capacity tends to decrease at low
temperatures. Keep spare batteries in a
pocket or other warm place and exchange
as necessary. Cold batteries may recover
some of their charge when warmed.
• Fingerprints and other stains on the battery
terminals can impair battery performance.
Thoroughly clean the terminals with a
soft, dry cloth before inserting them in the
camera.
If the batteries leak, clean the battery
compartment thoroughly before inserting new batteries.
If fluid from the battery comes into
contact with skin or clothing, flush
the affected area with water. If fluid
enters your eyes, immediately flush the
affected area with water and seek
medical attention. Do not rub your eyes.
Failure to observe this precaution could
result in permanent visual impairment.
■ Ni-MH Batteries
The capacity of Ni-MH batteries may be
temporarily reduced when new, after long
periods of disuse, or if they are repeatedly
recharged before being fully discharged. This
is normal and does not indicate a malfunction. Capacity can be increased by repeatedly
discharging the batteries using the discharge
option in the camera setup menu and recharging them using a battery charger.
Q CAUTION: Do not use the discharge option
with alkaline batteries.
The camera draws a small amount of current
even when off. Ni-MH batteries that have
been left in the camera for an extended period may be drawn down to the point that
they no longer hold a charge. Battery performance may also drop if the batteries are run
down in a device such as a flashlight. Use the
discharge option in the camera setup menu
to discharge Ni-MH batteries. Batteries that
no longer hold a charge even after repeatedly being discharged and recharged have
reached the end of their service life and must
be replaced.
AC Power Adapters (Available Separately)
This section applies to all camera models.
Use only FUJIFILM AC power adapters designated for use with this camera. Other adapters could damage the camera.
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected
to the camera.
• Turn the camera off before disconnecting
the adapter. Disconnect the adapter by the
plug, not the cable.
• Do not use with other devices.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the
touch during use. This is normal.
• If the adapter causes radio interference,
reorient or relocate the receiving antenna.
Ni-MH batteries can be recharged in a battery
charger (sold separately). Batteries may become warm to the touch after charging. Refer
to the instructions provided with the charger
for more information. Use the charger with
compatible batteries only.
Ni-MH batteries gradually lose their charge
when not in use.
■ Disposal
Dispose of used batteries in accord with local
regulations.
vii
For Your Safety
Using the Camera
Do not aim the camera at extremely bright
light sources, such as the sun in a cloudless
sky. Failure to observe this precaution could
damage the camera image sensor.
Take Test Shots
Before taking photographs on important
occasions (such as at weddings or before
taking the camera on a trip), take a test shot
and view the result in the LCD monitor to ensure that the camera is functioning normally.
FUJIFILM Corporation can not accept liability
for damages or lost profits incurred as a result
of product malfunction.
Notes on Copyright
Unless intended solely for personal use, images recorded using your digital camera system
cannot be used in ways that infringe copyright laws without the consent of the owner.
Note that some restrictions apply to the
photographing of stage performances, entertainments, and exhibits, even when intended
purely for personal use. Users are also asked
to note that the transfer of memory cards
containing images or data protected under
copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Handling
To ensure that images are recorded correctly,
do not subject the camera to impact or physical shocks while images are being recorded.
viii
Liquid Crystal
In the event that the LCD monitor is damaged,
care should be taken to avoid contact with liquid crystal. Take the urgent action indicated
should any of the following situations arise:
• If liquid crystal comes in contact with your
skin, clean the area with a cloth and then
wash thoroughly with soap and running
water.
• If liquid crystal enters your eyes, flush the affected eye with clean water for at least 15
minutes and then seek medical assistance.
• If liquid crystal is swallowed, rinse your
mouth thoroughly with water. Drink large
quantities of water and induce vomiting,
then seek medical assistance.
Electrical Interference
This camera may interfere with hospital or
aviation equipment. Consult with hospital
or airline staff before using the camera in a
hospital or on an aircraft.
Color Television Systems
NTSC (National Television System Committee)
is a color television telecasting specification
adopted mainly in the U.S.A., Canada, and
Japan. PAL (Phases Alternation by Line) is
a color television system adopted mainly in
European countries and China.
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera file
format in which information stored with phoAlthough the display is manufactured using tographs is used for optimal color reproducextremely high-precision technology, it may tion during printing.
contain pixels that are always lit or that do not
IMPORTANT NOTICE:
light. This is not a malfunction, and images reRead Before Using the Software
corded with the product are unaffected.
Direct or indirect export, in whole or in part,
of licensed software without the permission
Trademark Information
xD-Picture Card and E are trademarks of the applicable governing bodies is proof FUJIFILM Corporation. The typefaces in- hibited.
cluded herein are solely developed by DynaComware Taiwan Inc. Macintosh, QuickTime,
and Mac OS are trademarks of Apple Inc. in
the U.S.A. and other countries. Windows 7,
Windows Vista, and the Windows logo are
trademarks of the Microsoft group of companies. Adobe and Adobe Reader are either
trademarks or registered trademarks of Adobe Systems Incorporated in the U.S.A. and/or
other countries. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo
is a trademark. YouTube is a trademark of
Google Inc. All other trade names mentioned
in this manual are the trademarks or registered trademarks of their respective owners.
For Your Safety
IMPORTANT: Read this section before using the toponyms includ- Disclaimer of Warranty: FUJIFILM Corporation AND ITS LICENSORS
ed in this product.
(INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY
WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE,
Toponym Data License Agreement
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONPersonal Use Only. You agree to use this Data together with this digital INFRINGEMENT. Some States, Territories and Countries do not allow
camera for the solely personal, non-commercial purposes for which certain warranty exclusions, so to that extent the above exclusion may
you were licensed, and not for service bureau, time-sharing or other not apply to you.
similar purposes. Accordingly, but subject to the restrictions set forth
in the following paragraphs, you may copy this Data only as necessary Disclaimer of Liability: FUJIFILM Corporation AND ITS LICENSORS (INfor your personal use to (i) view it, and (ii) save it, provided that you do CLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO
not remove any copyright notices that appear and do not modify the YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE
Data in any way. You agree not to otherwise reproduce, copy, modify, OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION
decompile, disassemble or reverse engineer any portion of this Data, ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT,
and may not transfer or distribute it in any form, for any purpose, ex- WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFORcept to the extent permitted by mandatory laws. Multi-disc sets may MATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR
only be transferred or sold as a complete set as provided by FUJIFILM SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR
Corporation and not as a subset thereof.
INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMARestrictions. Except where you have been specifically licensed to do TION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER
so by FUJIFILM Corporation, and without limiting the preceding para- IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY,
graph, you may not (a) use this Data with any products, systems, or EVEN IF FUJIFILM Corporation OR ITS LICENSORS HAVE BEEN ADVISED
applications installed or otherwise connected to or in communication OF THE POSSIBILITY OF SUCH DAMAGES. Some States, Territories and
with vehicles, capable of vehicle navigation, positioning, dispatch, real Countries do not allow certain liability exclusions or damages limitatime route guidance, fleet management or similar applications; or (b) tions, so to that extent the above may not apply to you.
with or in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including Export Control. You agree not to export from anywhere any part of the
without limitation cellular phones, palmtop and handheld computers, Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applipagers, and personal digital assistants or PDAs.
cable export laws, rules and regulations.
Warning. The Data may contain inaccurate or incomplete information
due to the passage of time, changing circumstances, sources used Entire Agreement. These terms and conditions constitute the entire
and the nature of collecting comprehensive geographic data, any of agreement between FUJIFILM Corporation (and its licensors, including their licensors and suppliers) and you pertaining to the subject
which may lead to incorrect results.
matter hereof, and supersedes in their entirety any and all written or
No Warranty. This Data is provided to you “as is,” and you agree to use oral agreements previously existing between us with respect to such
it at your own risk. FUJIFILM Corporation and its licensors (and their subject matter.
licensors and suppliers) make no guarantees, representations or warranties of any kind, express or implied, arising by law or otherwise,
including but not limited to, content, quality, accuracy, completeness,
effectiveness, reliability, fitness for a particular purpose, usefulness,
use or results to be obtained from this Data, or that the Data or server
will be uninterrupted or error-free.
ix
For Your Safety
Governing Law. The above terms and conditions shall be governed by
the laws of the State of Illinois, Netherlands, without giving effect to
(i) its conflict of laws provisions, or (ii) the United Nations Convention
for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the State of Illinois,
The Netherlands for any and all disputes, claims and actions arising
from or in connection with the Data provided to you hereunder.
Geodetics. The geodetic system used by this device to record latitude
and longitude is WGS 84.
Copyright. The map data included in this device are protected under
copyright law and except for personal use may not be employed
without the permission of the copyright holder.
Navigation. This device can not be used for purposes of navigation.
Licensed Software Copyright Holders
© 2010 NAVTEQ All rights reserved.
This service uses POI (Points Of Interest) of ZENRIN CO., LTD. “POWERED BY
ZENRIN” is a trademark of ZENRIN CO.,
LTD. © 2010 ZENRIN CO., LTD. All rights
reserved.
© Her Majesty the Queen in Right of Canada, © Queen’s Printer for
Ontario, © Canada Post Corporation, GeoBase®, © Department of
Natural Resources Canada, ZIP+4®, © United States Postal Service®
2010. the USPS®.
x
Australia
Austria
Copyright. Based on data provided under
license from PSMA Australia Limited
(www.psma.com.au).
“© Bundesamt für Eich- und Vermessungswesen”
“© EuroGeographics”
Croatia, Cyprus,
Estonia, Latvia,
Lithuania, Moldova,
Poland, Slovenia and/
or Ukraine
France
The following notice must appear on all
copies of the Data, and may also appear
on packaging: “source: © IGN France – BD
TOPO®”
Germany
“Die Grundlagendaten wurden mit
Genehmigung der zuständigen Behörden
entnommen” or “Die Grundlagendaten
wurden mit Genehmigung der zustaendigen Behoerden entnommen.”
Great Britain
“Based upon Crown Copyright material.”
Greece
“Copyright Geomatics Ltd.”
Hungary
“Copyright © 2003; Top-Map Ltd.”
Italy
“La Banca Dati Italiana è stata prodotta
usando quale riferimento anche cartografia
numerica ed al tratto prodotta e fornita
dalla Regione Toscana.”
Norway
“Copyright © 2000; Norwegian Mapping
Authority”
Portugal
“Source: IgeoE – Portugal”
Spain
“Información geográfica propiedad del
CNIG”
Sweden
“Based upon electronic data Ó National
Land Survey Sweden.”
Switzerland
“Topografische Grundlage: Ó Bundesamt für
Landestopographie.”
For Your Safety
■ Governing Law
POI information in Japan: The above terms and conditions shall be
governed by the laws of Japan, without giving effect to (i) its conflict
of laws provisions, or (ii) the United Nations Convention for Contracts
for the International Sale of Goods, which is explicitly excluded. You
agree to submit to the exclusive jurisdiction of the Tokyo District Court
in the first instance for any and all disputes, claims and actions arising
from or in connection with the Data provided to you hereunder.
POI information outside Japan: The above terms and conditions shall be
governed by the laws of the State of Illinois, without giving effect to
(i) its conflict of laws provisions, or (ii) the United Nations Convention
for Contracts for the International Sale of Goods, which is explicitly
excluded. You agree to submit to the jurisdiction of the State of Illinois
for any and all disputes, claims and actions arising from or in connection with the Data provided to you hereunder.
Government End Users: If the Data is being acquired by or on behalf of
the United States government or any other entity seeking or applying rights similar to those customarily claimed by the United States
government, this Data is a “commercial item” as that term is defined at
48 C.F.R. (“FAR”) 2.101, is licensed in accordance with these End-User
Terms, and each copy of Data delivered or otherwise furnished shall
be marked and embedded as appropriate with the following “Notice
of Use,” and shall be treated in accordance with such Notice:
NOTICE OF USE
CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: NAVTEQ
CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 425 West Randolph
Street, Chicago, Illinois 60606
This Data is a commercial item as defined in FAR 2.101 and is subject
to these End-User Terms under which this Data was provided.
© 2010 NAVTEQ – All rights reserved.
If the Contracting Officer, federal government agency, or any federal
official refuses to use the legend provided herein, the Contracting
Officer, federal government agency, or any federal official must notify
NAVTEQ prior to seeking additional or alternative rights in the Data.
xi
About This Manual
Before using the camera, read this manual and the warnings in “For Your Safety” (P ii). For information on specific topics, consult the sources below.
Table of Contents ...........................P
........................... P xiv
The “Table of Contents” gives an overview of the entire manual. The principal camera operations are listed here.
Troubleshooting .......................... P 115
Having a specific problem with the
camera? Find the answer here.
Warning Messages and Displays ... P 121
Find out what’s behind that flashing
icon or error message in the display.
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and
SDXC memory cards (P 12), referred to in this manual as “memory cards.”
Temperature Warning
The camera will turn off automatically before its temperature or the temperature
of the battery rise above safe limits. Pictures taken when a temperature warning is
displayed may exhibit higher levels of “noise” (mottling). Turn the camera off and wait
for it to cool before turning it on again.
xii
Frequently-Used Buttons
■ Turning the Camera on in Playback Mode
y When the camera is
off, playback can be
started by pressing the
a button for about a
second.
■ Deleting Pictures
y To delete a picture,
display it full frame and
press the selector up (b).
■ Taking Pictures During Playback
y To return instantly to shooting mode,
press the shutter button halfway.
Shoot
View
■ Silent Mode
y Press and hold the DISP/
BACK button to disable
camera lights and
sounds.
xiii
Table of Contents
For Your Safety ..................................................................ii
IMPORTANT SAFETY INSTRUCTIONS ..................................ii
Safety Notes ....................................................................iv
About This Manual ..........................................................xii
Frequently-Used Buttons ..............................................xiii
Before You Begin
Symbols and Conventions.................................................1
Supplied Accessories .........................................................1
Parts of the Camera ..........................................................2
Camera Displays ...............................................................4
Shooting ........................................................................4
Playback.........................................................................5
First Steps
Charging the Battery ........................................................7
Inserting the Battery and a Memory Card.......................9
Compatible Memory Cards .............................................12
Turning the Camera on and Off ......................................14
Shooting Mode ..............................................................14
Playback Mode ...............................................................14
Basic Setup ......................................................................16
xiv
Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode.............17
Viewing Pictures .............................................................21
More on Photography
Shooting Mode ................................................................22
O (E AUTO/E Priority) .................23
R (E AUTO).................................................23
E Priority ..........................................................24
Adv. ADVANCED ..........................................................25
r MOTION PANORAMA 360.......................................25
i PRO FOCUS ...........................................................28
j PRO LOW-LIGHT ....................................................29
SP SCENE POSITION.......................................................30
M MANUAL ...................................................................32
A APERTURE PRIORITY AE ..............................................32
S SHUTTER PRIORITY AE ................................................33
P PROGRAM AE ..............................................................33
Focus Lock ........................................................................34
Table of Contents
d Exposure Compensation ..........................................36
F Macro Mode (Close-ups) ...........................................37
N Using the Flash (Super-Intelligent Flash) .................38
h Using the Self-Timer .................................................40
b Intelligent Face Detection .......................................41
R Continuous Shooting ...............................................42
I TOP n .....................................................................42
P BEST FRAME CAPTURE...........................................43
O AE BKT ..................................................................44
X FILM SIMULATION BKT ............................................45
Y DYNAMIC RANGE BKT .............................................45
n Face Recognition ......................................................46
Adding New Faces ..........................................................46
Viewing, Editing, and Deleting Existing Data .................48
Adding Faces Automatically ...........................................48
More on Playback
Playback Options.............................................................50
Continuous Shooting......................................................50
I Favorites: Rating Pictures .........................................50
Playback Zoom ...............................................................51
Multi-Frame Playback ....................................................52
A Deleting Pictures......................................................53
b Image Search............................................................54
m PhotoBook Assist .....................................................55
Creating a PhotoBook.....................................................55
Viewing Photobooks ......................................................56
Editing and Deleting Photobooks ...................................56
Viewing Panoramas ........................................................57
Viewing Photo Information............................................58
GPS
Recording GPS Data with Pictures .................................59
GPS Tracking ....................................................................61
Viewing GPS Data ............................................................62
Photo Navigation ...........................................................62
Copying GPS Data to Other Images.................................63
R Landmark Navigator ................................................64
xv
Table of Contents
Movies
Recording Movies ............................................................66
Movie Frame Size ...........................................................67
Viewing Movies ...............................................................68
Connections
Viewing Pictures on TV ...................................................69
Printing Pictures via USB ................................................71
Printing the DPOF Print Order.........................................73
Viewing Pictures on a Computer ....................................75
Windows: Installing MyFinePix Studio ...........................75
Macintosh: Installing FinePixViewer...............................78
Connecting the Camera ..................................................80
Menus
Using the Menus: Shooting Mode ..................................83
Using the F-Mode Menu .............................................83
F-Mode Menu Options ................................................83
N ISO........................................................................83
O IMAGE SIZE ............................................................84
R CONTINUOUS .........................................................85
R SET-UP ..................................................................85
Z ADVANCED ANTI BLUR ............................................85
P FILM SIMULATION ..................................................85
xvi
Using the Shooting Menu...............................................86
Shooting Menu Options .................................................86
A E MODE ....................................................86
A Adv. MODE ............................................................86
A SCENE POSITION.....................................................86
N ISO........................................................................86
O IMAGE SIZE ............................................................86
T IMAGE QUALITY .....................................................86
U DYNAMIC RANGE ...................................................87
P FILM SIMULATION ..................................................87
D WHITE BALANCE ....................................................88
y INTELLIGENT SHARPNESS........................................89
R CONTINUOUS .........................................................89
R MY LANDMARK REGISTER .......................................89
Z ADVANCED ANTI BLUR ............................................89
b FACE DETECTION ....................................................89
C PHOTOMETRY ........................................................90
F AF MODE ...............................................................90
n FACE RECOGNITION .................................................91
F MOVIE AF MODE ....................................................91
W MOVIE MODE .........................................................91
J AE BKT EV STEPS ....................................................91
Table of Contents
Using the Menus: Playback Mode ..................................92
Using the F-Mode Menu .............................................92
F-Mode Menu Options ................................................92
m PHOTOBOOK ASSIST................................................92
R LANDMARK NAVIGATOR ..........................................92
R PHOTO NAVIGATION ................................................92
R SET-UP ..................................................................93
I SLIDE SHOW ..........................................................93
Using the Playback Menu ...............................................94
Playback Menu Options..................................................94
m PHOTOBOOK ASSIST................................................94
R LANDMARK NAVIGATOR ..........................................94
R LOCATION INFO COPY ..............................................94
R PHOTO NAVIGATION ................................................94
b IMAGE SEARCH ......................................................94
A ERASE ...................................................................94
j MARK FOR UPLOAD TO ............................................95
I SLIDE SHOW ..........................................................96
B RED EYE REMOVAL .................................................96
D PROTECT................................................................96
G CROP.....................................................................97
O RESIZE ...................................................................97
C IMAGE ROTATE .......................................................98
E COPY.....................................................................98
F VOICE MEMO .........................................................99
i ERASE FACE RECOG. ................................................99
K PRINT ORDER (DPOF) ..............................................99
J DISP ASPECT ........................................................100
The Setup Menu ............................................................101
Using the Setup Menu..................................................101
Setup Menu Options ....................................................102
F DATE/TIME ..........................................................102
N TIME DIFFERENCE .................................................102
Q a ....................................................102
o SILENT MODE.......................................................102
R RESET..................................................................103
K FORMAT ..............................................................103
R SET-UP ................................................................103
A IMAGE DISP. .........................................................104
B FRAME NO. ..........................................................104
G OPERATION VOL....................................................105
H SHUTTER VOLUME ................................................105
e SHUTTER SOUND ..................................................105
I PLAYBACK VOLUME ..............................................105
J LCD BRIGHTNESS ..................................................105
N AUTO POWER OFF ................................................105
L DUAL IS MODE .....................................................106
B RED EYE REMOVAL ...............................................106
R INTELLIGENT DIGITAL ZOOM ..................................107
C AF ILLUMINATOR ..................................................107
j RAW ...................................................................108
t SAVE ORG IMAGE .................................................108
m AUTOROTATE PB ...................................................108
O BACKGROUND COLOR............................................108
c GUIDANCE DISPLAY ..............................................108
Q VIDEO SYSTEM .....................................................109
x POWER MANAGEMENT .........................................109
S WATERPROOF CASE ..............................................110
R DEMONSTRATION .................................................110
xvii
Table of Contents
Technical Notes
Troubleshooting
Optional Accessories .....................................................111
Accessories from FUJIFILM............................................112
Caring for the Camera ...................................................113
Storage and Use ...........................................................113
Cleaning .......................................................................114
Traveling ......................................................................114
Problems and Solutions ................................................115
Warning Messages and Displays ..................................121
xviii
Appendix
Internal Memory/Memory Card Capacity ....................125
Specifications ................................................................126
Before You Begin
Symbols and Conventions
The following symbols are used in this manual:
Q : This information should be read before use to ensure correct operation.
R : Additional information that may be helpful when using the camera.
P: Other pages in this manual on which related information may be found.
Menus and other text in the displays are shown in bold. In the illustrations in
this manual, displays may be simplified for explanatory purposes.
Supplied Accessories
The following items are included with the camera:
NP-50 rechargeable battery
• Strap
• Basic Manual
BC-45W battery
charger
USB cable
A/V cable
CD-ROM
(contains this
manual)
Attaching the Strap
Attach the strap
as shown.
1
Parts of the Camera
For more information, refer to the page listed to the right of each item.
Selector button
Move cursor up
d (exposure compensation) button (P 36)
b (delete) button (P xiii)
Move cursor left
F (macro) button (P 37)
Command dial
2
MENU/OK button
Move cursor right
N (flash) button (P 38)
Move cursor down
h (self-timer) button (P 40)
Before You Begin
Parts of the Camera
1 Shutter button .............................................................. 19
2 ON/OFF button ............................................................. 14
3 Built-in GPS antenna .................................................... 59
4 Flash ............................................................................. 38
5 Flash pop-up button ..................................................... 38
6 Lens and lens cover
7 AF-assist illuminator ................................................... 107
Self-timer lamp ............................................................ 40
8 Microphone (R) .......................................................66, 99
9 Microphone (L) ........................................................66, 99
10 Zoom control ...........................................................18, 51
11 LCD monitor .................................................................... 4
12 a (playback) button .................................................. 21
13 Indicator lamp (see below)
14 Mode dial...................................................................... 22
*Press and hold the DISP/BACK button until o is displayed.
15 Strap eyelet .................................................................... 1
16 F (movie recording) button ....................................... 66
17 Terminal cover ...................................................69, 71, 80
18 DC coupler cable cover ................................................ 112
19 F (photo mode) button .........................................83, 92
20 DISP (display)/BACK button .....................................6, 16
o (silent mode) button* .............................................xiii
21 Battery-chamber cover ................................................... 9
22 Tripod mount
23 Speaker....................................................................68, 99
24 USB multi-connector .........................................69, 71, 80
25 Connector for HDMI cable ............................................. 70
26 Battery latch ..............................................................9, 11
27 Battery chamber ............................................................. 9
28 Memory card slot .......................................................... 10
The Indicator Lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Glows green
Blinks green
Blinks green and orange
Glows orange
Blinks orange
Blinks red
Before You Begin
Camera status
Focus locked.
Blur, focus, or exposure warning. Picture can be taken.
Recording pictures. Additional pictures can be taken.
Recording pictures. No additional pictures can be taken at this time.
Flash charging; flash will not fire when picture is taken.
Lens or memory error.
3
Parts of the Camera
Camera Displays
The following types of indicator may be displayed during shooting and playback. Indicators vary with camera settings.
■ Shooting
P
9
800
F
12 / 31 / 2050 10 : 00 AM
-1 2 3
250
F3.5
11 Sensitivity ..................................................................... 83
12 Image size/quality ...................................................84, 86
13 Dynamic range ............................................................. 87
14 Film simulation............................................................. 85
15 White balance............................................................... 88
16 Battery level ................................................................... 5
17 Dual IS mode .............................................................. 106
18 GPS signal strength....................................................... 59
19 Exposure compensation ................................................ 36
20 Aperture
21 Shutter speed
22 Date and time ............................................................... 16
23 Blur warning..........................................................39, 121
24 Focus frame .................................................................. 34
25 Intelligent sharpness .................................................... 89
26 Waterproof case .......................................................... 110
27 Self-timer indicator ...................................................... 40
28 Macro (close-up) mode................................................. 37
29 Flash mode ................................................................... 38
1 Shooting mode ............................................................. 22
2 Intelligent Face Detection indicator .............................. 41
3 Metering....................................................................... 90
4 Continuous shooting mode ........................................... 42
5 Silent mode indicator ..............................................3, 102
6 Focus warning .......................................................19, 121
7 Internal memory indicator *
8 Temperature warning ................................................. 121
9 Movie mode.................................................................. 67
10 Number of available frames........................................ 125
*a: indicates that no memory card is inserted and that pictures will be stored in the camera’s internal memory (P 10).
4
Before You Begin
Parts of the Camera
■ Playback
5 Motion panorama z ................................................. 57
6 Gift image..................................................................... 50
7 Frame number ............................................................ 104
400
8 Dynamic range ............................................................. 87
4:3 F
9 E mode.............................................................. 23
10 GPS data ....................................................................... 62
YouTube
11 Portrait enhancer.......................................................... 30
12 Mark for upload to ........................................................ 95
12 / 31 / 2050 10 : 00 AM
-1 2 3
1 / 250
F3.5
13 Photobook assist........................................................... 55
14 Voice memo indicator ................................................... 99
1 Playback mode indicator..........................................21, 50 15 DPOF print indicator ..................................................... 73
2 Intelligent Face Detection indicator .........................41, 96 16 Protected image ........................................................... 96
3 Red-eye removal indicator ............................................ 96 17 Favorites ....................................................................... 50
4 Pro focus mode, pro low-light mode........................28, 29
100-0001
Battery Level
Battery level is shown as follows:
Indicator
D (white)
C (white)
B (red)
A (blinks red)
Description
Battery partially discharged.
Battery more than half discharged.
Low battery. Charge as soon as possible.
Battery exhausted. Turn camera off and charge battery.
Before You Begin
5
Parts of the Camera
Hiding and Viewing Indicators
Press DISP/BACK to cycle through shooting and playback indicators as follows:
• Shooting: Indicators displayed/indicators hidden/best framing/HD framing/histogram
• Playback: Indicators displayed/indicators hidden/I favorites (P 50)/photo info (P 58)
6
Before You Begin
First Steps
Charging the Battery
The battery is not charged at shipment. Charge the battery before use.
1 Place the battery in the supplied battery charger.
Insert the battery in the orientation
indicated by the DFC labels.
The camera uses an NP-50 rechargeable battery.
2 Plug the charger in.
Charge lamp
Battery
Arrow
DFC
label
Battery charger
DFC label
Plug the charger into an indoor power outlet. The charging indicator will
light.
The Charging Indicator
The charging indicator shows battery charge status as follows:
Charging indicator
Off
On
Blinks
Battery status
Battery not inserted.
Battery fully charged.
Battery charging.
Battery fault.
Action
Insert the battery.
Remove the battery.
—
Unplug the charger and remove the battery.
7
Charging the Battery
3 Charge the battery.
Remove the battery when charging is complete. See the specifications
(P 130) for charging times (note that charging times increase at low temperatures).
Q Unplug the charger when it is not in use.
8
First Steps
Inserting the Battery and a Memory Card
Although the camera can store pictures in internal memory, optional SD,
SDHC, and SDXC memory cards (sold separately) can be used to store additional pictures. After charging the battery, insert the battery and memory card
as described below.
1 Open the battery-chamber cover.
R Be sure the camera is off before opening
the battery-chamber cover.
Q Do not open the battery-chamber cover
when the camera is on. Failure to observe this precaution could result in damage to image files or memory cards.
Q Do not use excessive force when handling the battery-chamber cover.
2 Insert the battery.
Align the orange stripe on the battery with the orange
battery latch and slide the battery into the camera,
keeping the battery latch pressed to one side. Confirm
that the battery is securely latched.
Q Insert the battery in the correct orientation. Do NOT use
force or attempt to insert the battery upside down or backwards. The battery will slide in easily in the correct orientation.
First Steps
Orange stripe
Battery latch
9
Inserting the Battery and a Memory Card
3 Insert the memory card.
Holding the memory card in the orientation shown at
right, slide it in until it clicks into place at the back of
the slot.
Click
Q Be sure card is in the correct orientation; do not insert at
an angle or use force. If the memory card is not correctly
inserted or no memory card is inserted, a will appear in
the LCD monitor and internal memory will be used for recording and playback.
Q SD/SDHC/SDXC memory cards can be locked, making
it impossible to format the card or to record or delete
images. Before inserting an SD/SDHC/SDXC memory
card, slide the write-protect switch to the unlocked
position.
Write-protect switch
4 Close the battery-chamber cover.
10
First Steps
Inserting the Battery and a Memory Card
R Using an AC Power Adapter
• The camera can be powered by an optional AC power adapter and DC coupler (sold
separately). See the manuals provided with the AC power adapter and DC coupler
for details.
• Depending on the country or region of sale, a demo mode slide show may start if
the camera is turned on while powered by an AC power adapter. Press the shutter
button to end the show.
Removing the Battery and Memory Card
Before removing the battery or memory card, turn the camera off and open the
battery-chamber cover.
To remove the battery, press the battery latch to the side, and
slide the battery out of the camera as shown.
Battery latch
To remove the memory card, press it in and release it slowly.
The card can then be removed by hand. When a memory card
is removed, the card could come out of the slot too quickly. Use
your finger to hold it and gently release the card.
First Steps
11
Inserting the Battery and a Memory Card
■ Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera. A complete list of approved memory cards is
available at http://www.fujifilm.com/support/digital_cameras/compatibility/.
Operation is not guaranteed with other cards. The camera can not be used
with xD-Picture Cards or MultiMediaCard (MMC) devices.
Q Memory Cards
• Do not turn the camera off or remove the memory card while the memory card is
being formatted or data are being recorded to or deleted from the card. Failure to
observe this precaution could damage the card.
• Format SD/SDHC/SDXC memory cards before first use, and be sure to reformat all
memory cards after using them in a computer or other device. For more information
on formatting memory cards, see “K FORMAT” (P 103).
• Memory cards are small and can be swallowed; keep out of reach of children. If a
child swallows a memory card, seek medical assistance immediately.
• miniSD or microSD adapters that are larger or smaller than the standard dimensions
of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take
the camera to an authorized service representative. Do not forcibly remove the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory
card. Use a G card or better when shooting HD or high-speed movies.
12
First Steps
Inserting the Battery and a Memory Card
• The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in
which pictures are stored. Do not rename or delete this folder or use a computer or
other device to edit, delete, or rename image files. Always use the camera to delete
pictures from memory cards and internal memory; before editing or renaming files,
copy them to a computer and edit or rename the copies, not the originals.
Q Batteries
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this
precaution could prevent the battery from charging.
• Do not affix stickers or other objects to the battery. Failure to observe this precaution
could make it impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery could overheat.
• Read the cautions in “The Battery and Power Supply” (P vi).
• Use only battery chargers designated for use with the battery. Failure to observe this
precaution could result in product malfunction.
• Do not remove the labels from the battery or attempt to split or peel the outer casing.
• The battery gradually loses its charge when not in use. Charge the battery one or
two days before use.
First Steps
13
Turning the Camera on and Off
Shooting Mode
Press the ON/OFF button to turn the
camera on. The lens will extend automatically.
Playback Mode
To turn the camera on and begin
playback, press the a button for
about a second.
Press ON/OFF again to turn the camera
off.
Press the a button again or press
the ON/OFF button to turn the camera
off.
R Switching to Playback Mode
Press the a button to start playback.
Press the shutter button halfway to return
to shooting mode.
14
R Switching to Shooting Mode
To exit to shooting mode, press the shutter button halfway. Press the a button
to return to playback.
First Steps
Turning the Camera on and Off
Q Forcibly obstructing the lens could cause damage or product malfunction.
Q Fingerprints and other marks on the lens can affect pictures. Keep the lens clean.
Q The ON/OFF button does not completely end the supply of power to the camera.
R Auto Power Off
The camera will turn off automatically if no operations are performed for the length of
time selected for N AUTO POWER OFF (P 105).
First Steps
15
Basic Setup
A language-selection dialog is displayed the first time the camera is turned
on. Set up the camera as described below (you can reset the clock or change
languages at any time using the F DATE/TIME or Q a options in
the setup menu; for information on displaying the setup menu, see page 102).
1 Highlight a language and press MENU/OK.
R Press DISP/BACK to skip the current step. Any steps you skip
will be displayed the next time the camera is turned on.
START MENU
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
PORTUGUÊS
SET
2 The date and time will be displayed. Press the selector
left or right to highlight the year, month, day, hour, or
minute and press up or down to change. To change the
order in which the year, month, and day are displayed,
highlight the date format and press the selector up or
down. Press MENU/OK when settings are complete.
NO
DATE/TIME NOT SET
2013
2012
YY. MM. DD
2011
2010
2009
SET
1. 1 12 : 00
AM
NO
3 Power management options will be displayed. Press the selector up or
down to highlight one of the following options and then press MENU/OK:
• n POWER SAVE: Save battery power.
• o CLEAR DISPLAY: Choose for a brighter, higher quality display.
R The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the
language-selection dialog will be displayed when the camera is turned on.
16
First Steps
Basic Photography and Playback
Taking Pictures in R ((E
E AUTO
AUTO)) Mode
This section describes how to take pictures in R (E AUTO) mode.
1 Select O mode.
Turn the camera on and rotate the mode dial to O. The R display
will appear in the LCD monitor.
The o Icon
In R mode, the camera continuously adjusts focus and searches for faces, increasing the drain on the battery. o is displayed in the LCD monitor.
Scene Icon (P 23)
The camera automatically selects the appropriate scene.
R The camera analyses the scene and selects the preferred E mode when
the shutter button is pressed halfway (P 24).
R To raise the flash when lighting is poor, press the flash pop-up button (P 38).
17
Taking Pictures in R (E AUTO) Mode
2 Frame the picture.
Use the zoom control to frame the picture in the display.
Zoom indicator
Zoom out
Zoom in
Holding the Camera
Hold the camera steady with both hands and brace your
elbows against your sides. Shaking or unsteady hands can
blur your shots.
To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from
the lens and flash.
18
Basic Photography and Playback
Taking Pictures in R (E AUTO) Mode
3 Focus.
Press the shutter button halfway to focus.
R The lens may make a noise when the camera focuses;
this is normal. If the subject is poorly lit, the AF-assist
illuminator may light; see “C AF ILLUMINATOR”(P 107)
for information on disabling the illuminator.
Double
beep
If the camera is able to focus, it will beep twice and the indicator lamp will
glow green.
If the camera is unable to focus, the focus frame will turn red, s will be displayed, and the indicator lamp will blink green. Change the composition
or use focus lock (P 34).
Basic Photography and Playback
19
Taking Pictures in R (E AUTO) Mode
4 Shoot.
Smoothly press the shutter button the rest of the way
down to take the picture.
Click
The Shutter Button
The shutter button has two positions. Pressing the shutter button halfway sets
focus and exposure; to shoot, press the shutter button the rest of the way down.
20
Basic Photography and Playback
Viewing Pictures
Pictures can be viewed in the LCD monitor. When taking important photographs, take a test shot and check the results.
1 Press the a button.
The most recent picture will be displayed.
2 View additional pictures.
Press the selector right to view pictures in the order
recorded, left to view pictures in reverse order.
Press the shutter button to exit to shooting mode.
Basic Photography and Playback
21
More on Photography
Shooting Mode
Choose a shooting mode according to the scene or type
of subject. To select a shooting mode, align the mode
icon with the mark next to the mode dial.
M, A, S, P: Select for full control over camera settings
(P 32), including aperture (M and A) and/or shutter speed
(M and S).
O: Improve clarity, reduce
noise, increase dynamic range,
or let the camera automatically
adjust settings to suit the scene
(P 23).
B (AUTO): A simple “point-andshoot” mode recommended for
first-time users of digital cameras.
22
SP (SCENE POSITION): Choose a
scene suited to the subject or
shooting conditions and let the
camera do the rest (P 30).
Adv. (ADVANCED): Sophisticated techniques made easy
(P 25).
Shooting Mode
O ((E
E AUTO/
AUTO/E
E Priority)
Optimize settings for your current subject or improve clarity, reduce
noise, or enhance dynamic range. Rotate the mode dial to O
and choose one of the following E modes in the shooting
menu.
■ R (E AUTO)
The camera automatically selects the scene and E
mode according to shooting conditions (P 17).
R If S is selected for O IMAGE SIZE in R mode, the camera
will automatically select the optimal image size.
R R INTELLIGENT DIGITAL ZOOM is restricted to 2× (P 107). Scene icon
The Scene Icon
The camera selects from the following scenes:
Scene
Main subject
Non-portrait
Normal
Portrait
Backlit
Moving object
Portrait and Normal
motion
Backlit
LANDAUTO SCAPE NIGHT MACRO BEACH SUNSET SNOW
a
d
g
c
a
b
c
d*
e
dc dd * —
gc —
—
cc cd ce
ac ad —
bc —
—
u
du
gu
cu
au
bu
v
dv
gv
cv
av
bv
w
dw
gw
cw
aw
bw
SKY &
SKY GREENERY GREENERY
x
dx
gx
cx
ax
bx
y
dy
gy
cy
ay
by
z
dz
gz
cz
az
bz
* If n is displayed, the camera will take a series of shots (advanced anti-blur; P 24).
Q The mode selected may vary with shooting conditions. If the mode and subject do not match,
select B mode (P 22) or choose SP (P 30) and select a scene manually.
More on Photography
23
Shooting Mode
Advanced Anti Blur
When n is displayed, the camera will take a series of exposures and combine them
to form a single image, reducing “noise” (mottling) and blur.
R n is available when ON is selected in the shooting menu (P 85) and the flash
(P 38) is off or set to auto.
Q Some time may be required to combine the exposures into a single image. A
single combined image may not be created if the subject or camera moves during shooting. Keep the camera steady during shooting and do not move the
camera until shooting is complete.
Q Frame coverage is reduced.
The EXR Icon
When the shutter button is pressed halfway, the camera chooses the preferred E mode:
• S (RESOLUTION PRIORITY): Produces crisp, clear shots.
• T (HIGH ISO & LOW NOISE): Reduces noise in pictures taken at high sensitivities.
• U (D-RANGE PRIORITY): Increases the amount of detail visible in highlights.
■ E Priority
Select this mode to manually choose from the following E modes:
• S (RESOLUTION PRIORITY): Choose for crisp, clear shots.
• T (HIGH ISO & LOW NOISE): Reduce noise in pictures taken at high sensitivities.
• U (D-RANGE PRIORITY): Increase the amount of detail visible in highlights.
U DYNAMIC RANGE (P 87) can be set to Z (1600%) and Y (800%).
24
More on Photography
Shooting Mode
Adv. ADVANCED
This mode combines “point-and-shoot” simplicity with sophisticated photographic techniques. The A Adv. MODE option in
the shooting menu can be used to choose from the following advanced modes:
■ r MOTION PANORAMA 360
Follow an on-screen guide to take photos that will automatically be joined to form a panorama. The camera
zooms all the way out and remains fixed at the widest
angle until shooting is complete.
1 To select the angle through which you will pan the camera while shooting, press the selector down. Press the selector left or right to highlight an
angle and press MENU/OK.
2 Press the selector right to view a choice of pan directions. Press the selector left or right to highlight a pan direction and press MENU/OK.
3 Press the shutter button all the way down to start recording. There is no
need to keep the shutter button pressed during recording.
More on Photography
25
Shooting Mode
4 Pan the camera in the direction shown by the arrow.
120
Shooting ends automatically when the progress bar is
full and the panorama is complete.
R Shooting ends if the shutter button is pressed all the way
down during shooting. No panorama will be recorded if
the shutter button is pressed before the camera has been
panned through 120 °.
Progress bar
Q Panoramas are created from multiple frames. The camera may in some cases record
an greater or lesser angle than selected or be unable to stitch the frames together
perfectly. The last part of the panorama may not be recorded if shooting ends before the panorama is complete.
Q Shooting may be interrupted if the camera is panned too quickly or too slowly. Panning the camera in a direction other than that shown cancels shooting.
Q The desired results may not be achieved with moving subjects, subjects close to
the camera, unvarying subjects such as the sky or a field of grass, subjects that are
in constant motion, such as waves and waterfalls, or subjects that undergo marked
changes in brightness. Panoramas may be blurred if the subject is poorly lit.
26
More on Photography
Shooting Mode
z
Choose z for seamless 360 ° panoramas that can be played back in a loop (P 57).
R The t SAVE ORG IMAGE option in the setup menu can be used to record a v
panorama in addition to a seamless z panorama (P 108).
Q Depending on the subject and shooting conditions, the camera may produce
distorted results or a v panorama. The top and bottom of the area visible in
the shooting display are cropped out and white strips may appear at the top and
bottom of the display.
For Best Results
For best results, move the camera in a small circle at a steady speed, keeping the
camera horizontal and being careful only to pan in the direction shown by the
guides. If the desired results are not achieved, try panning at a different speed.
More on Photography
27
Shooting Mode
■ i PRO FOCUS
The camera takes up to three shots each time the shutter
button is pressed, softening the background to emphasize
the main subject. The amount of softening can be adjusted
before shooting by pressing the selector left or right. Use
for portraits or photos of flowers similar to those produced
by SLR cameras.
R Softening can not be applied to background objects that are too close to the main
subject. If a message stating that the camera can not create the effect is displayed
when the camera focuses, try backing away from your subject and zooming in. The
camera may also be unable to soften the background if the subject is moving; if
prompted, check the results and try again.
28
More on Photography
Shooting Mode
■ j PRO LOW-LIGHT
Each time the shutter button is pressed, the camera makes
four exposures and combines them into a single photograph. Use to reduce noise and blur when photographing
poorly lit subjects or static subjects at high zoom ratios.
R A single combined photograph may not be created with some
scenes or if the subject or camera moves during shooting. Do not move the camera
until shooting is complete.
PRO FOCUS/PRO LOW-LIGHT
To save unprocessed copies of pictures taken in these modes, select ON for the
t SAVE ORG IMAGE option in the setup menu (P 108).
Q Keep the camera steady during shooting.
Q Frame coverage is reduced.
Q The camera may make fewer than four exposures in some situations.
More on Photography
29
Shooting Mode
SP SCENE POSITION
The camera offers a choice of “scenes,” each adapted to particular
shooting conditions or a specific type of subject. Use the A SCENE
POSITION option in the shooting menu to choose the scene assigned to the SP position on the mode dial.
Scene
C NATURAL & N
D NATURAL LIGHT
h PORTRAIT
Z PORTRAIT
ENHANCER
l DOG
m CAT
M LANDSCAPE
N SPORT
O NIGHT
H NIGHT (TRIPOD)
p FIREWORKS
Q SUNSET
R SNOW
s BEACH
30
Description
The camera takes two shots: one without the flash and one with.
Capture natural lighting under low-light conditions.
Choose for portraits.
Choose for a smooth skin effect when shooting portraits.
Choose when photographing dogs.
Choose when photographing cats.
Choose for daylight shots of buildings and landscapes.
Choose when photographing moving subjects.
Choose this mode for poorly lit twilight or night scenes.
Choose this mode for slow shutter speeds when shooting at night.
Slow shutter speeds are used to capture the expanding burst of light from
a firework.
Choose this mode to record the vivid colors in sunrises and sunsets.
Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow.
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
More on Photography
Shooting Mode
Scene
f UNDERWATER
U PARTY
V FLOWER
W TEXT
Description
Choose for when using an optional waterproof case to take photographs
underwater.
Capture indoor background lighting under low-light conditions.
Choose for vivid close-ups of flowers.
Take clear pictures of text or drawings in print.
l DOG/m CAT
The camera focuses on the faces of dogs or cats that are facing the camera, and the
self-timer menu offers a n AUTO RELEASE option that releases the shutter automatically when a pet is detected (P 40). During playback, image search (P 54) can be
used to search for pictures taken in either mode.
R Although camera can detect many different breeds of dogs and cats, results may
vary with the breed and shooting conditions. The camera may fail to detect pets
with dark-colored faces or long hair covering their entire face. If a dog or cat is not
detected, the camera focuses on the subject at the center of the frame.
More on Photography
31
Shooting Mode
M MANUAL
In this mode, you control both shutter speed and aperture.
Press the selector up (d) to highlight shutter speed or
aperture and use the command dial to adjust the highlighted item. If desired, exposure can be altered from the
value selected by the camera.
The Exposure Indicator
The amount the picture will be under- or over-exposed at current settings is shown by the exposure indicator.
SETTING SHUTTER SPEED
1000 F3.5
SETTING SHUTTER SPEED
1000 F3.5
A APERTURE PRIORITY AE
You choose the aperture using the command dial, while the camera
adjusts shutter speed for optimal exposure.
Q If the correct exposure can not be achieved at the selected
aperture, shutter speed will be displayed in red. Adjust aperture until the correct exposure is achieved. If the subject is
outside the metering range of the camera, the shutter speed
display will show “---”. Press the shutter button halfway to
measure exposure again.
32
F3.5
More on Photography
Shooting Mode
S SHUTTER PRIORITY AE
You choose the shutter speed using the command dial, while the
camera adjusts aperture for optimal exposure.
Q If the correct exposure can not be achieved at the selected
shutter speed, aperture will be displayed in red. Adjust shutter speed until the correct exposure is achieved. If the subject
is outside the metering range of the camera, the aperture
display will show “F ---”. Press the shutter button halfway to
measure exposure again.
1000
P PROGRAM AE
The camera sets exposure automatically.
Q If the subject is outside the metering range of the camera, the shutter speed and
aperture displays will show “---”. Press the shutter button halfway to measure exposure again.
More on Photography
33
Focus Lock
To compose photographs with off-center subjects:
1 Focus: Position the subject in the focus frame (
)
and press the shutter button halfway to lock focus
and exposure. Focus and exposure will remain locked
while the shutter button is pressed halfway (AF/AE
lock).
2 Recompose: Keep the button pressed halfway.
3 Shoot: Press the button all the way down.
34
More on Photography
Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to
focus on the subjects listed below. If the camera is unable to focus, focus on another
subject at the same distance and use focus lock to recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Subjects that show little contrast with the background
• Fast-moving subjects.
(for example, subjects in clothing that is the same color
• Subjects photographed through a window or other re- as the background).
flective object.
• Subjects positioned in front of or behind a high-contrast
• Dark subjects and subjects that absorb rather than reflect object that is also in the focus frame (for example, a
light, such as hair or fur.
subject photographed against a backdrop of highly con• Insubstantial subjects, such as smoke or flame.
trasting elements).
More on Photography
35
d Exposure Compensation
To adjust exposure compensation when photographing
very bright, very dark, or high-contrast subjects, press
the selector up (d). Press the selector up or down or
use the command dial to choose an exposure compensation value and then press MENU/OK.
Choose positive (+) values
to increase exposure
Choose negative (–) values
to reduce exposure
R A d icon and exposure indicator are displayed at settings other than ±0. Exposure
compensation is not reset when the camera is turned off ; to restore normal exposure control, choose a value of ±0.
R Turn the flash off when using exposure compensation.
36
More on Photography
F Macro Mode (Close-ups)
For close-ups, press the selector left (F) and select F.
When macro mode is in effect, the camera focuses on
subjects near the center of the frame. Use the zoom
control to compose pictures (P 18).
To exit macro mode, press the selector left (F) and select
OFF.
P
OFF
MACRO
Close-up shots
R Use of a tripod is recommended to prevent blur caused by camera shake.
R The shadow cast by the lens may appear in photographs taken with the flash at
very short ranges. Zoom out or increase the distance to the subject.
More on Photography
37
N Using the Flash (Super-Intelligent Flash)
When the flash is used, the camera’s Super-Intelligent Flash system instantly
analyzes the scene based on such factors as the brightness of the subject,
its position in the frame, and its distance from the camera. Flash output and
sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the effects of ambient background lighting, even in dimly-lit
indoor scenes. Use the flash when lighting is poor, for example when shooting at night or indoors under low light.
1 Press the flash pop-up button to raise the flash.
R If playback is in progress, return to shooting mode before raising the flash.
38
More on Photography
N Using the Flash (Super-Intelligent Flash)
2 Press the selector right (N) and choose from the following flash modes:
Option
Description
The flash fires when required. Recommended in most
AUTO//K
AUTO
situations.
The flash fires whenever a picture is taken. Use for backN/L * lit subjects or for natural coloration when shooting in
bright light.
Capture both the main subject and the background
O/M * under low light (note that brightly lit scenes may be
overexposed).
Flash off. Use where flash photography is prohibited or
to capture natural dim natural lighting. A tripod can be
P
used to prevent blurring when lighting is poor.
R The flash also turns off when lowered.
*
P
AUTO FLASH
According to
shooting conditions
* J icon indicates that Intelligent Face Detection and red-eye removal are on and will be used
to minimize “red-eye” caused by the flash reflecting from the retinas of portrait subjects.
R The flash is automatically lowered when the camera is turned off.
R If the flash will fire, p will be displayed when the shutter button is pressed halfway.
At slow shutter speeds, k will appear in the display to warn that pictures may be
blurred; use of a tripod is recommended.
R The flash may fire several times with each shot. Do not move the camera until
shooting is complete.
R The flash may cause vignetting.
More on Photography
39
h Using the Self-Timer
To use the self-timer, press the selector down (h) and
choose from the following options:
P
OFF
OFF
Option
Description
Self-timer off.
The shutter is released automatically when the camera detects a human portrait
o (AUTO RELEASE)
subject facing the camera. Use for portraits of babies.
The shutter is released ten seconds after the shutter button is pressed. Use for
S (10 SEC)
self-portraits. The self-timer lamp on the front of the camera lights when the
timer starts and begins to blink shortly before the photo is taken.
The shutter is released two seconds after the shutter button is pressed. Use to
R (2 SEC)
reduce blur caused by the camera moving when the shutter button is pressed.
The self-timer lamp will blink as the timer counts down.
T (OFF)
40
More on Photography
b Intelligent Face Detection
Intelligent Face Detection sets focus and exposure for human faces anywhere
in the frame, preventing the camera from focusing on the background in
group portraits. Choose for shots that emphasize portrait subjects.
To use Intelligent Face Detection, press MENU/OK to display the shooting menu and select ON for b FACE
DETECTION. Faces can be detected with the camera
in vertical or horizontal orientation; if a face is detected,
it will be indicated by a green border. If there is more
than one face in the frame, the camera will select the
face closest to the center; other faces are indicated by
white borders.
Q In some modes, the camera may set exposure for the frame as a whole rather than
the portrait subject.
Q If the subject moves as the shutter button is pressed, their face may not be in the
area indicated by the green border when the picture is taken.
More on Photography
41
R Continuous Shooting
To capture motion in a series of pictures, press MENU/OK,
select R CONTINUOUS in the shooting menu (P 89),
and choose from the options listed in this section.
R The flash turns off automatically. The previously selected flash mode is restored
when OFF is selected for R CONTINUOUS.
R Frame rate varies with shutter speed.
R Focus and exposure are determined by the first frame in each series.
R The number of pictures that can be taken in a single burst varies with the scene
and camera settings. The number of pictures that can be recorded depends on the
memory available.
■ I TOP n
The camera takes photographs while the shutter button is pressed. To choose
the frame rate and maximum number of shots per burst:
1 Press the selector right when the camera is in shooting
mode.
CONTINUOUS SHOOTING SETUP
SHOOTING SPEED
NUMBER OF FRAMES
4
2 Highlight the current frame rate or number of shots and
press the selector right, then press selector up or down
to choose a new value and press MENU/OK to select.
3 Press DISP/BACK to return to shooting mode when settings are complete.
42
More on Photography
R Continuous Shooting
■ P BEST FRAME CAPTURE
The camera takes a series of pictures, starting before and ending after the
shutter button is pressed.
1 Choose the frame rate as described in Steps 1–2 on the previous page.
Q Some frame rates may reduce the number of shots available.
2 Highlight the number of shots and press the selector
right. Press the selector up or down to choose the number of shots in each burst and left or right to choose
their distribution (the number on the left is taken before
and the number on the right after the shutter button
is pressed). Press MENU/OK when settings are complete
and press DISP/BACK to return to shooting mode.
More on Photography
Shots per burst
CONTINUOUS SHOOTING SETUP
SHUTTER
SET
16
8FRAMES
CANCEL
Distribution
43
R Continuous Shooting
3 Take photographs. The camera begins recording while the shutter button
is pressed halfway, and completes the burst when the shutter button is
pressed all the way down. The illustration shows a burst of eight shots,
three before the shutter button is pressed and four after.
Shutter button
pressed halfway
Shutter button pressed all
the way down
“Before” shots
“After” shots
Q If the shutter button is pressed all the way down before the number of frames
selected for the “before” portion is recorded, the remaining frames will be taken
after the shutter button is pressed all the way down.
Q If the shutter button is pressed halfway for an extended period, the camera may
record the burst before the shutter button is pressed all the way down.
■ O AE BKT
Each time the shutter button is pressed, the camera takes three shots: one using the metered value for exposure, the second overexposed by the amount
selected for J AE BKT EV STEPS in the shooting menu (P 91), and the third
underexposed by the same amount (the camera may not be able to use the
selected bracketing increment if the amount of over- or under- exposure exceeds the limits of the exposure metering system).
44
More on Photography
R Continuous Shooting
■ X FILM SIMULATION BKT
Each time the shutter button is pressed, the camera takes one shot and processes it to create three copies with different P FILM SIMULATION settings
(P 85): c PROVIA/STANDARD for the first, d Velvia/VIVID for the second,
and e ASTIA/SOFT for the third.
■ Y DYNAMIC RANGE BKT
Each time the shutter button is pressed, the camera takes three shots at different U DYNAMIC RANGE settings (P 87): V 100% for the first, W 200% for
the second, and X 400% for the third (N ISO can not exceed 3200; values
less than 400 are not available when O is selected for O IMAGE SIZE).
j RAW
The number of pictures that can be recorded in a single burst varies with the option
selected for j RAW in the setup menu.
j RAW
R CONTINUOUS
I TOP n
P BEST FRAME CAPTURE
O AE BKT
X FILM SIMULATION BKT
Y DYNAMIC RANGE BKT
More on Photography
RAW+JPEG
Up to 6
Up to 6
3
—
—
RAW
Up to 6
Up to 6
3
—
—
OFF (JPEG)
Up to 32
Up to 16
3
3
3
45
n Face Recognition
The camera can store information on the face and personal
details (name, relationship, and birth date) of portrait subjects and assign these subjects priority for Intelligent Face
Detection or display their names and other information
during playback.
Happy Birthday!
Adding New Faces
Follow the steps below to add faces to the face recognition database.
1 Select REGISTER.
Select REGISTER for n FACE RECOGNITION in the shooting menu.
R To disable face recognition, select OFF.
2 Take a photograph.
After checking that the subject is facing the camera,
frame the subject using the guides and take the photograph.
R If an error is displayed, take the photograph again.
46
REGISTER FACE
CAPTURE THE FACE
ALONG WITH THE GUIDLINE
CANCEL
More on Photography
n Face Recognition
3 Enter face recognition data
Press MENU/OK to display face recognition data and enter the following information:
• NAME: Enter a name of up to 14 characters and press MENU/OK.
• BIRTHDAY: Enter the subject’s date of birth and press MENU/OK.
• CATEGORY: Choose the option that describes your relationship to the subject and press MENU/OK.
R If you attempt to zoom in on the face of a person indicated by a green border
in the face recognition database on their birthday, the camera will display their
name and the message “Happy Birthday!”
More on Photography
47
n Face Recognition
Viewing, Editing, and Deleting Existing Data
Follow the steps below to view, edit, or delete face recognition data.
1 Select VIEW & EDIT for n FACE RECOGNITION.
2 Select a face.
3 View or edit face recognition data.
The name, category, or birth date can be edited as described in Step 3 of
“Adding New Faces” (P 47). To retake the photo, select REPLACING IMAGE
and shoot a new portrait as described above.
R To delete face recognition data for the selected subject, select ERASE.
Adding Faces Automatically
To automatically add frequently-photographed subjects to the face recognition database, select ON for AUTO REGISTRATION in the face recognition
menu. If the camera detects a face that has been photographed many times
without being added to the database, it will display a message prompting you
to create a new face recognition entry. Press MENU/OK and enter face recognition data.
R The camera may sometimes fail to recognize new faces automatically. If necessary,
faces can be added manually using the REGISTER option.
48
More on Photography
n Face Recognition
Face Recognition
The camera can store up to eight faces. If you attempt to add a ninth face, a confirmation dialog will be displayed; use VIEW & EDIT to make room for new faces by
deleting existing data. AUTO REGISTRATION is disabled if there are already data for
eight faces.
When Intelligent Face Detection (P 41) is on and the frame contains multiple subjects
from the face recognition database, the camera displays the name of the subject
that will be used to set focus and exposure (the subject shown by the green frame).
If no name is entered, the camera will show “---”. Subjects identified using face recognition but not used to set focus and exposure are shown by orange frames, other
subjects by white frames.
Q The camera may fail to identify subjects in the face recognition database if they
are not facing the camera or are only partly in the frame, or if details of the subjects’ faces or expressions differ markedly from those in the database.
More on Photography
49
More on Playback
Playback Options
To view the most recent picture in the LCD monitor, press the a button.
100-0001
Press the selector right to view pictures in the order recorded, left to view
pictures in reverse order. Keep the selector pressed to scroll rapidly to the
desired frame.
R Pictures taken using other cameras are indicated by a m (“gift image”) icon during
playback.
Continuous Shooting
In the case of pictures taken in continuous shooting mode, only the first frame
of each series will be displayed. Press the selector down to view the other
pictures in the series.
I Favorites: Rating Pictures
To rate the picture currently displayed in full-frame playback, press DISP/BACK
and press the selector up and down to select from zero to five stars.
50
Playback Options
Playback Zoom
Select i to zoom in on pictures displayed in single-frame playback; select
j to zoom out. When the picture is zoomed in, the selector can be used to
view areas of the image not currently visible in the display.
Zoom indicator
Navigation window shows
portion of image currently
displayed in LCD monitor
Press DISP/BACK to exit zoom.
R The maximum zoom ratio varies with image size. Playback zoom is not available
with cropped or resized copies saved at a size of a or smaller.
More on Playback
51
Playback Options
Multi-Frame Playback
Selecting j when a picture is shown full-frame in the LCD monitor displays
the current image with previous and following images in the background.
Select j to increase the number of images displayed to two, nine, or one
hundred, i to view fewer images.
100-0001
When two or more images are displayed, use the selector to highlight images
and press MENU/OK to view the highlighted image full frame. In the nine- and
hundred-frame displays, use the selector to view more pictures.
52
More on Playback
A Deleting Pictures
PLAYBACK MENU
To delete individual pictures, multiple selected
pictures, or all pictures, press MENU/OK, select
A ERASE (P 94), and choose from the options
below. Note that deleted pictures can not be recovered. Copy important pictures to a computer or other storage device before
proceeding.
OFF
ERASE
BACK
FRAME
SELECTED FRAMES
ALL FRAMES
Option
Description
Press the selector left or right to scroll through pictures and press MENU/OK to delete
FRAME
the current picture (a confirmation dialog is not displayed).
Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks
SELECTED or print orders are shown by S). When the operation is complete, press DISP/BACK
FRAMES to display a confirmation dialog, then highlight OK and press MENU/OK to delete the
selected pictures.
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all
unprotected pictures (if a memory card is inserted, only the pictures on the memory
ALL FRAMES card will be affected; the pictures in internal memory are only deleted if no memory
card is inserted). Pressing DISP/BACK cancels deletion; note that any pictures deleted
before the button was pressed can not be recovered.
R Protected pictures can not be deleted. Remove protection from any pictures you
wish to delete (P 96).
R If a message appears stating that the selected images are part of a DPOF print order,
press MENU/OK to delete the pictures.
More on Playback
53
b Image Search
Search for pictures.
1 Select b IMAGE SEARCH in the playback menu (P 94), highlight one of
the following search criteria, and press MENU/OK:
• BY DATE: Search by date.
• BY GPS LOCATION NAME: Search by location name (location names that do
not begin with a letter from A to Z are listed in the search conditions
under “#”).
• BY FACE: Search for faces from the face recognition database.
• BY I FAVORITES: Search by rating.
• BY SCENE: Search by scene.
• BY TYPE OF DATA: Find all still pictures or all movies.
• BY UPLOAD MARK: Find all pictures selected for upload to a specified destination.
2 Select a search condition. Only pictures that match the search condition
will be displayed. To delete or protect selected pictures or to view the
search results in a slide show, press MENU/OK and choose A ERASE (P 94),
D PROTECT (P 96), or I SLIDE SHOW (P 93).
54
More on Playback
m PhotoBook Assist
Create books from your favorite photos.
Creating a PhotoBook
1 Select NEW BOOK for m PHOTOBOOK ASSIST in the playback menu
(P 92) and choose from the following options:
• SELECT FROM ALL: Choose from all available pictures.
• SELECT BY IMAGE SEARCH: Choose from pictures matching selected search
conditions (P 54).
R Neither photographs a or smaller nor movies can be selected for photobooks.
2 Scroll through the images and press the selector up to select or deselect.
To display the current image on the cover, press the selector down. Press
MENU/OK to exit when the book is complete.
R The first picture selected becomes the cover image. Press the selector down to
select a different image for the cover.
3 Select COMPLETE PHOTOBOOK (to select all photos or all photos matching the specified search conditions for the book, choose SELECT ALL). The
new book will be added to the list in the photobook assist menu.
Q Books can contain up to 300 pictures.
Q Books that contain no photos are automatically deleted.
More on Playback
55
m PhotoBook Assist
Viewing Photobooks
Highlight a book in the photobook assist menu and press MENU/OK to display
the book, then press the selector left or right to scroll through the pictures.
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the on-screen instructions.
• EDIT: Edit the book as described in “Creating a PhotoBook” (P 55).
• ERASE: Delete the book.
Photobooks
Photobooks can be copied to a computer using the supplied MyFinePix Studio software.
56
More on Playback
Viewing Panoramas
If you press the selector down when a panorama is displayed full frame, the
camera will play back the picture from left to right or from bottom to top. To
pause playback, press the selector down; press the selector down again to
resume. To exit to full-frame playback, press the selector up while panorama
playback is in progress. Once displayed in full-frame playback, panoramas can
be zoomed in or out using the zoom control or deleted by pressing the selector up (b).
PLAY
STOP
PAUSE
R z panoramas play back in an endless loop (P 27); the playback direction can be
controlled by pressing the selector left or right. The camera will not turn off automatically while playback is in progress (P 105).
More on Playback
57
Viewing Photo Information
Photo information can be viewed by pressing DISP/BACK to cycle through indicators (P 6) until the following display appears:
100-0001
4:3 N
ISO 400
F4.5
1/250
: STD
: OFF
:
: -1 2 3
12/31/2050 10 : 00 AM
q Dynamic range w Image size and quality
e Sensitivity
r Shutter speed/aperture
t Film simulation y Flash mode
u White balance
i Exposure compensation o Frame number
!0 Picture (overexposed areas blink on and off )
!1 Histogram
No. of
pixels
Histograms
Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the
number of pixels by the vertical axis.
Pixel brightness
Shadows
Highlights
Optimal exposure: Pixels are distributed in an even
curve throughout the tone range.
Overexposed: Pixels are clustered on the right side of
the graph.
Underexposed: Pixels are clustered on the left side of
the graph.
58
More on Playback
GPS
Recording GPS Data with Pictures
To record GPS data with new pictures, press the F button and select one of the following options for R SETUP > LOCATION SEARCH in the F-mode menu (P 85).
• PERMANENTLY ON: The camera continues to update GPS data even when
turned off. The camera will be quicker to display GPS data when turned on,
but the drain on the battery will increase.
• WHEN SWITCHED ON: The camera updates GPS data only when on. The camera
may need some time to acquire GPS data when turned on. This option is
selected automatically at battery levels of B and below.
R GPS works best outdoors under clear skies.
During shooting, GPS data are displayed in the monitor as
shown at right. Signal strength is indicated by the number
of bars; O is displayed when the camera is searching for a
signal, Q if the camera is in GPS demo mode, and P if no
signal is detected. The current location is shown by a place
name or (if no place name is available) by the longitude
and latitude.
P
- MINATO, TOKYO, JAPAN
Location
Signal
strength
R The display of GPS information can be turned off by selecting OFF for LOCATION
INFO (P 85).
59
Recording GPS Data with Pictures
Q Using GPS increases the drain on the battery, causing battery performance to drop
at low temperatures.
Q The receiver may have an error of a few hundred meters (yards).
Q The camera may be unable to receive GPS data in some locations. If possible,
choose an outdoor location with few obstructions when turning the camera on.
Q The position recorded when a photo is taken may differ from the actual location if
some time has passed since the camera was last able to update GPS data.
Q Select OFF for LOCATION SEARCH (P 85) and TRACKING DATA (P 85) in the
R SET-UP menu when in a hospital and before takeoff and landing if traveling
by air.
Q Place names are current as of the date on which the map database was created
(P 128) and will not be updated to reflect any changes after that date.
Q Comprehensive place name data are unavailable in some countries and regions. If
no name is available, the latitude and longitude will be displayed for a few seconds.
GPS
The camera may be unable to receive GPS data if the antenna (P 2) is obstructed or
when underground, underwater, under a bridge or overpass, inside a vehicle, building, tunnel, or metal briefcase, between tall buildings, or in the vicinity of cell phones
or other devices that broadcast in the 1.5 GHz band.
Obey all local regulations regarding the use of GPS devices. Note that the use of
GPS devices is restricted in some countries, including the People’s Republic of China.
Before going abroad, consult with the embassy or a travel agent. The camera may
display P (no signal) in locations in which restrictions apply.
60
GPS
GPS Tracking
To record a GPS track log to a file on the memory card, select ON for R SET-UP >
TRACKING DATA (P 85; be sure the clock is set to the correct time and date as described on page 16). A new log file is created when ON is selected and once every
24 hours thereafter. Note that the camera will continue to update GPS data even
when off, increasing the drain on the battery.
Q GPS logs can be viewed in MyFinePix Studio.
Q See “GPS” (P 60) for information on using GPS.
Q The indicator lamp glows orange during recording GPS data even when the camera is turned off while ON is selected. Select OFF before removing the battery or
memory card. Failure to observe this precaution could damage the card.
Q Signal strength will be displayed in yellow and GPS data will not be logged if the
battery is low (B or less), no memory card is inserted, or the memory card has less
than 32 MB free. To resume the log, select ON after inserting a charged battery or a
memory card with more than 32 MB free.
Q GPS tracking may be interrupted during movie recording and playback.
Using GPS to Set the Camera Clock
The AUTO TIME CORRECTION item in the R SET-UP menu can be used to synchronize the camera clock to the time provided by GPS satellites. Select ON (W/o
SUMMERTIME) to set the clock to local standard time or ON (W/ SUMMERTIME) to
set the clock to local daylight saving time. If daylight saving time is in effect, time will
automatically be advanced one hour.
Q Selecting g LOCAL for N TIME DIFFERENCE turns AUTO TIME CORRECTION off. Note
that GPS may not provide the correct time in some locations; if necessary select OFF for
AUTO TIME CORRECTION and set the clock using F DATE/TIME (P 102).
GPS
61
Viewing GPS Data
During playback, pictures for which GPS data exist are indicated by a J icon. GPS data are shown for a few seconds each time the picture is displayed.
GPS icon
100-0001
- MINATO, TOKYO, JAPAN
Photo Navigation
To show the direction and distance from your present position to the location
where a picture was taken:
1 Select an option other than OFF for R SET-UP > LOCATION SEARCH and
confirm that the camera is receiving GPS data (P 93).
2 Display a picture with a J icon.
3 Select R PHOTO NAVIGATION in the playback menu
(P 92). The approximate direction and distance to the location where the picture was taken are displayed as shown,
using the units selected for R SET-UP > km/mile (P 93).
Distances over 1000 units are indicated by “>”, those under
100 units by “<”.
100-0001
NE <100 m
- MINATO, TOKYO, JAPAN
R Photo navigation ends when the next picture is displayed.
62
GPS
Viewing GPS Data
Copying GPS Data to Other Images
GPS data can be copied from other pictures to images that lack correct GPS
information.
1 Display the source image for the GPS data.
2 Select R LOCATION INFO COPY in the playback menu (P 94).
3 Press the selector left or right to display the destination and press MENU/OK
to copy the data to the image.
Q The original GPS data can not be recovered.
Q GPS data can not be deleted.
Q The camera may be unable to copy GPS data to or from images created on other
devices.
GPS
63
R Landmark
R
Landmark Navigator
Landmark navigation uses GPS and the camera map database to show information on objects the display (this is
sometimes known as “augmented reality,” or AR). To view
landmark information, select R LANDMARK NAVIGATOR in the F-mode playback menu (P 92).
DIST: 20m
FUJIFILM
NNW
N
NNE
The display varies with camera orientation:
• For an “AR” display, hold the camera • For a “radar” display, hold the camwith the lens pointed forward.
era with the lens pointed down.
DIST: 20m
DIST: 20m
m
FUJIFILM
NNW
N
NNE
FUJIFILM
R Use the zoom control to zoom in and out. To display additional information, press
the selector left or right to highlight landmarks and press MENU/OK. Press the selector down to choose the landmark type. Press DISP/BACK to return to playback or
press the shutter button halfway to exit to shooting mode.
R Landmarks can be added using R MY LANDMARK REGISTER (P 89).
64
GPS
R Landmark Navigator
Q Landmark information is based on the most recently-received GPS data; it is intended as a guide only and may be unavailable or contain errors under some conditions,
including when the camera is held upside down. Headings rely on a magnetic
compass and may not be correct if the camera is inside a building or vehicle or
close to metal objects, magnets, high-voltage power lines, or electrical equipment.
Calibration
A f icon indicates that the camera’s internal sensor requires
calibration. Move the camera slowly in a large figure eight while
rotating your wrist as shown.
DIST: 20m
COMPASS FACES INTERFERENCE
ROTATE THE CAMERA AS FIGURE 8
FUJIFILM
NNW
N
NNE
If the icon does not clear from the display, choose a different location and try again.
Q To ensure that you do not drop the camera, use the strap (P 1).
GPS
65
Movies
Recording Movies
Press F to shoot a movie. During recording, the following indicators will be displayed and sound will be recorded via the built-in
microphone (be careful not to cover the microphone during recording).
y REC icon
REC
1
999m59s
F
Number of photos that
can be taken during
recording
Time remaining
To end recording, press the F button again. Recording ends automatically
when the movie reaches maximum length or memory is full.
R Zoom can be adjusted while recording is in progress.
R If the subject is poorly lit, the AF-assist lamp may light to assist the focus operation.
To turn the AF-assist lamp off, select OFF for C AF ILLUMINATOR in the setup
menu (P 107).
R Focus, exposure, and white balance are adjusted automatically throughout recording. The color and brightness of the image may vary from that displayed before
recording begins.
R Sounds made by the camera may be recorded.
66
Recording Movies
Taking Photographs During Recording
Press the shutter button to take a photograph during recording.
R If O is selected for O IMAGE SIZE, the picture will be recorded at size P.
R The photo is saved separately from the movie and does not appear as part of the movie.
Q Photos can not be taken while a high-speed movie is being recorded.
Q The indicator lamp lights while movies are being recorded. Do not open the battery chamber during shooting or while the indicator lamp is lit. Failure to observe
this precaution could prevent the movie from being played back.
Q Vertical or horizontal streaks may appear in movies containing very bright subjects.
This is normal and does not indicate a malfunction.
Q The temperature of the camera may rise if it is used to record movies for an extended period or if the ambient temperature is high. This is normal and does not
indicate a malfunction.
Movie Frame Size
Before recording, select a frame size using the W MOVIE MODE option in the
shooting menu (P 91).
Option
i 1920 (1920 × 1080)
h 1280 (1280 × 720)
f (640 × 480)
k 640 × 480 (80 fps)
k 320 × 240 (160 fps)
k 320 × 112 (320 fps)
Movies
Description
Full HD (High Definition).
High Definition.
Standard definition.
High speed movie. Sound is not recorded, and focus, exposure, and white
balance are not adjusted automatically. Black bands appear at the top and
bottom of movies recorded at k 320 × 112.
67
Viewing Movies
During playback, movies are displayed in the LCD monitor
as shown at right. The following operations can be performed while a movie is displayed:
Option
Description
Press the selector down to start playback. Press again to
Start/pause
pause. While playback is paused, you can press the selecplayback
tor left or right to rewind or advance one frame at a time.
End playback/
Press the selector up to end playback.
delete
Press the selector left or right to adjust playback speed durAdjust speed
ing playback.
Press MENU/OK to pause playback and display volume controls. Press the selector up or down to adjust the volume
Adjust volume
and press MENU/OK to exit. Volume can also be adjusted
from the setup menu.
100-006
12 / 31 / 2050
PLAY
10 : 00 AM
Playback Speed
Press the selector left or right to adjust playback speed. Speed is Arrow
shown by the number of arrows (M or N).
STOP
5m42s
PAUSE
Q Do not cover the speaker during playback.
68
Movies
Connections
Viewing Pictures on TV
Connect the camera to a TV to show pictures to a group.
1 Turn the camera off.
2 Connect the supplied A/V cable as shown below.
Insert into
USB multi-connector
Connect yellow plug to video-in jack
Connect white plug to audio-in jack
R Image quality drops during movie playback.
69
Viewing Pictures on TV
Connecting the Camera to High Definition (HD) TVs
An HDMI cable (available from third-party suppliers) can be used to connect the
camera to High Definition (HD) devices (playback only). The USB and A/V cables
can not be used while an HDMI cable is connected.
HDMI mini
connector
Insert into HDMI
connector
Insert into HDMI
connector
R When an HDMI cable is connected, pictures and sound are played back on the TV.
Q When connecting cables, be sure the connectors are fully inserted.
3 Tune the television to the video or HDMI input channel. See the documentation supplied with the television for details.
4 Press the a button for about a second to turn the camera on. The camera
monitor turns off and pictures and movies are played back on the TV. Note
that the camera volume controls have no effect on sounds played on the
TV; use the television volume controls to adjust the volume.
70
Connections
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected
directly to the printer as shown below and pictures can be printed
without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
1 Connect the supplied USB cable as shown and turn the printer on.
2 Press the a button for about a second to turn the camera on.
3 Press the selector left or right to display a picture you wish to print.
4 Press the selector up or down to choose the number of copies (up to 99).
5 Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a
confirmation dialog when settings are complete.
Connections
71
Printing Pictures via USB
6 Press MENU/OK to start printing. Printing can be interrupted by pressing
DISP/BACK, but note that some printers may not respond immediately. If the
printer stops before printing is complete, turn the camera off and then on
again.
7 After confirming that PRINTING has cleared from the camera display, turn
the camera off and disconnect the USB csable.
R Pictures can be printed from internal memory or a memory card that has been
formatted in the camera.
R If no pictures are selected, the camera will print one copy of the current picture.
R Page size, print quality, and border selections are made using the printer.
Printing the Date of Recording
To print the date of recording on pictures, press DISP/BACK in the PictBridge display
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without
the date of recording, select PRINT WITHOUT DATE). Some printers do not support
date printing. See the printer manual for details.
72
Connections
Printing Pictures via USB
Printing the DPOF Print Order
The K PRINT ORDER (DPOF) option in the playback menu can be used to
create a digital “print order” for PictBridge-compatible printers (P 111) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is a standard that allows pictures to be
printed from “print orders” stored in internal memory or on a memory card.
The information in the order includes the pictures to be printed and the
number of copies of each picture.
1 Select playback mode and press MENU/OK to display the playback menu.
2 Highlight K PRINT ORDER (DPOF) and press MENU/OK.
3 Highlight one of the following options and press MENU/OK:
• WITH DATE s: Print the date of recording on pictures.
• WITHOUT DATE: Do not print the date of recording on pictures.
R Some printers do not support date printing. See the printer manual for details.
4 Press the selector left or right to display a picture you wish to add to or
remove from the print order.
Connections
73
Printing Pictures via USB
5 Press the selector up or down to choose the number of copies (up to 99).
To remove a picture from the print order, press the selector down until the
number of copies is zero.
6 Repeat Steps 4 – 5 to complete the print order and press MENU/OK when
settings are complete.
7 A confirmation dialog will be displayed. Press MENU/OK to save the print
order.
R Remove the memory card to create or modify a print order for the pictures in
internal memory.
R Print orders can contain a maximum of 999 pictures.
R If a memory card is inserted containing a print order created by another camera,
a message will be displayed. Create a new print order as described above.
74
Connections
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where
they can be stored, viewed, organized, and printed. Before proceeding, install
the software as described below. Do NOT connect the camera to the computer
until installation is complete.
Windows: Installing MyFinePix Studio
1 Confirm that the computer meets the following system requirements:
Windows 7 (SP 1)/Windows Vista (SP 2) 1
3 GHz Pentium 4 or better
(2.4 GHz Core 2 Duo or better) 2
Windows XP (SP 3) 1
2 GHz Pentium 4 or better
CPU
(2.4 GHz Core 2 Duo or better) 2
512 MB or more
RAM
1 GB or more
(1 GB or more) 2
Free disk space
2 GB or more
Supports DirectX 9 or later
Supports DirectX 7 or later
GPU
(recommended
recommended))
(required; performance not guaranteed with other GPUs)
GPUs)
Video
1,024 × 768 pixels or more with 24-bit color or better
• Built-in USB port recommended. Operation is not guaranteed with other
USB ports.
Other
• Internet connection (broadband recommended) required to install
.NET Framework (if necessary), to use auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
1 Other versions of Windows are not supported. Only pre-installed operating systems are
supported; operation is not guaranteed on home-built computers or computers that have
been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.
Connections
75
Viewing Pictures on a Computer
2 Start the computer. Log in to an account with administrator privileges before proceeding.
3 Exit any applications that may be running and insert the installer CD in a
CD-ROM drive.
Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dialog will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and
follow the on-screen instructions to install MyFinePix Studio and RAW FILE
CONVERTER.
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX
CD window and double-click setup or SETUP.EXE.
76
Connections
Viewing Pictures on a Computer
4 If prompted to install Windows Media Player, DirectX, or .NET Framework,
follow the on-screen instructions to complete installation.
5 Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer CD in a dry location out of direct sunlight in case
you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera” (P 80).
Connections
77
Viewing Pictures on a Computer
Macintosh: Installing FinePixViewer
1 Confirm that the computer meets the following system requirements:
PowerPC or Intel (Core 2 Duo or better) *
Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.
OS
com/support/digital_cameras/compatibility/ for more information)
RAM
256 MB or more (1 GB or more) *
A minimum of 200 MB required for installation with 400 MB available when
Free disk space
FinePixViewer is running
Video
800 × 600 pixels or more with thousands of colors or better
Built-in USB port recommended. Operation is not guaranteed with other USB
Other
ports.
CPU
* Recommended when displaying HD movies.
2 After starting the computer and quitting any applications that may be running, insert the installer CD in a CD-ROM drive and double-click Installer
for Mac OS X.
R To install RAW FILE CONVERTER, double-click SILKYRFCEXInstaller. RAW FILE
CONVERTER is used to view RAW images on your computer.
3 An installer dialog will be displayed; click Installing FinePixViewer to start
installation. Enter an administrator name and password when prompted
and click OK, then follow the on-screen instructions to install FinePixViewer.
Click Exit to quit the installer when installation is complete.
78
Connections
Viewing Pictures on a Computer
4 Remove the installer CD from the CD-ROM drive. Note that you may be
unable to remove the CD if Safari is running; if necessary, quit Safari before
removing the CD. Store the installer CD in a dry location out of direct sunlight in case you need to re-install the software.
5 Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,
and select Preferences… from the Image Capture application menu. The
Image Capture preferences dialog will be displayed; choose Other… in
the When a camera is connected, open menu, then select FPVBridge
in the “Applications/FinePixViewer” folder and click Open. Quit Image Capture.
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”
folder and start Image Capture. The camera will be listed under DEVICES;
select the camera and choose FPVBridge from the Connecting this camera opens menu and click Choose. Quit Image Capture.
Installation is now complete. Proceed to “Connecting the Camera” (P 80).
Connections
79
Viewing Pictures on a Computer
Connecting the Camera
1 If the pictures you wish to copy are stored on a memory card, insert the
card into the camera.
R Windows users may require the Windows CD when starting the software for
the first time.
Q Loss of power during transfer could result in loss of data or damage to internal
memory or the memory card. Charge the battery before connecting the camera.
2 Turn the camera off and connect
the supplied USB cable as shown,
making sure the connectors are
fully inserted. Connect the camera
directly to the computer; do not
use a USB hub or keyboard.
3 Press the a button for about a second to turn the camera on. MyFinePix
Studio or FinePixViewer will start automatically; follow the on-screen instructions to copy pictures to the computer. To exit without copying pictures, click Cancel.
R If the software does not start automatically, it may not be correctly installed.
Disconnect the camera and reinstall the software.
80
Connections
Viewing Pictures on a Computer
For more information on using the supplied software, start the application
and select the appropriate option from the Help menu.
Q If a memory card containing a large number of images is inserted, there may be a
delay before the software starts and you may be unable to import or save images.
Use a memory card reader to transfer pictures.
Q Make sure that the computer does not display a message stating that copying is in
progress and that the indicator lamp is out before turning the camera off or disconnecting the USB cable (if the number of images copied is very large, the indicator
lamp may remain lit after the message has cleared from the computer display).
Failure to observe this precaution could result in loss of data or damage to internal
memory or the memory card.
Q Disconnect the camera before inserting or removing memory cards.
Q In some cases, it may not be possible to access pictures saved to a network server
using the supplied software in the same way as on a standalone computer.
Q The user bears all applicable fees charged by the phone company or Internet service provider when using services that require an Internet connection.
Connections
81
Viewing Pictures on a Computer
Disconnecting the Camera
After confirming that the indicator lamp is out, turn the camera off and disconnect
the USB cable.
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before beginning reinstallation. After quitting the software and disconnecting the camera, drag
the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control panel and use “Programs and
Features” (Windows 7/Windows Vista) or “Add or Remove Programs” (Windows XP) to
uninstall MyFinePix Studio. Under Windows, one or more confirmation dialogs may
be displayed; read the contents carefully before clicking OK.
82
Connections
Menus
Using the Menus: Shooting Mode
Use the F-mode and shooting menus to adjust shooting settings. The options available vary with the shooting mode selected.
Using the F-Mode Menu
To display F-mode menu shooting options, press the
F button in shooting mode. Highlight items and press
the selector right to view options, then highlight an option and press MENU/OK. Press DISP/BACK to exit when settings are complete.
F-Mode Menu Options
(defaults to AUTO)
N ISO
N ISO
Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mottling may appear in pictures taken at high sensitivities.
100
Bright
Less noticeable
ISO
Scene
Noise (mottling)
12800
Dark
More noticeable
Option
Description
Sensitivity is adjusted automatically in response to shooting conditions.
AUTO (3200) / AUTO (1600) / As above, except that sensitivity will not be raised above the value in
AUTO (800) / AUTO (400)
parentheses.
12800 / 6400 / 3200 / 1600 /
Sensitivity is set to the specified value, which is shown in the display.
800 / 400 / 200 / 100
AUTO
83
Using the Menus: Shooting Mode
O IMAGE SIZE
O IMAGE
Choose the image size and aspect ratio at which pictures are recorded. Large pictures can be printed at large sizes with no drop in quality,
while small pictures require less memory, allowing more pictures to be
recorded.
(defaults to O 4:3)
O4:3
Size
Aspect ratio
Size Versus Aspect Ratio
Size
Option
O
P
Q
4 : 3: Pictures have the same
proportions as the camera
display.
3
Aspect ratio
3 : 2: Pictures have the same
proportions as a frame of
35 mm film.
2
4
84
Prints at sizes up to
34 × 25 cm (13.5 × 10 in.)
24 × 18 cm (9.5 × 7 in.)
17 × 13 cm (7 × 5 in.)
16 : 9: Suited for display on
High Definition (HD) devices.
9
3
16
Menus
Using the Menus: Shooting Mode
R CONTINUOUS
R CONTINUOUS
Capture motion in a series of pictures ((P
P 42).
(defaults to OFF)
R SET-UP
Access the following GPS options (P 59).
Option
MY LANDMARK REGISTER
LOCATION SEARCH
LOCATION INFO
AUTO TIME CORRECTION
TRACKING DATA
km/mile
Description
Add custom landmarks to or delete them from the map database.
Turn the GPS receiver on or off.
Display GPS data.
Use GPS data to set the camera clock.
Record GPS data.
Choose the units used to display GPS information.
Z ADVANCED ANTI BLUR
Z ADVANCED
Select ON to enable advanced anti blur in R mode (P 24).
(defaults to ON)
P FILM SIMULATION
P FILM
(defaults to c)
Simulate the effects of different types of film, including sepia and black-and-white.
Option
c PROVIA/STANDARD
d Velvia/VIVID
e ASTIA/SOFT
b B&W
f SEPIA
Menus
Description
Standard color reproduction. Suited to a wide range of subjects, from
portraits to landscapes.
A high-contrast palette of saturated colors, suited to nature photographs.
A soft-toned palette of less saturated colors.
Take pictures in black and white.
Take pictures in sepia.
85
Using the Menus: Shooting Mode
Using the Shooting Menu
To display the shooting menu, press MENU/OK in shooting
mode. Highlight items and press the selector right to
view options, then highlight an option and press MENU/
OK. Press DISP/BACK to exit when settings are complete.
Shooting Menu Options
A E MODE
Choose an option for E mode (P 23).
(defaults to R)
A Adv. MODE
Choose an advanced shooting mode (P 25).
(defaults to r)
A SCENE POSITION
Choose a scene for SP mode (P 30).
N ISO
Control the camera’s sensitivity to light (P 83).
O IMAGE SIZE
Choose image size and aspect ratio (P 84).
T IMAGE QUALITY
Choose how much image files are compressed.
Option
FINE
NORMAL
86
(defaults to h)
(defaults to AUTO)
(defaults to O 4:3)
(defaults to F)
Description
Low compression. Select for higher image quality.
High compression. Select this option to store more pictures.
Menus
Using the Menus: Shooting Mode
(defaults to AUTO)
U DYNAMIC RANGE
Control contrast. Higher values are recommended for scenes that include both sunlight and
deep shade or for increased contrast with such subjects as sunlight on water, brightly-lit autumn
leaves, portraits taken against a blue sky, and white objects or people wearing white; note, however, that mottling may appear in pictures taken at higher values. If AUTO is selected, the camera
will automatically select values between 100% and 400% in response to shooting conditions.
Option
Description
V 100% Increase contrast when shooting indoors or under overcast skies.
AUTO
W 200%
X 400%
Y 800%
Reduce loss of detail in highlights and shadows when photographing
high-contrast scenes.
Z 1600%
R Z 1600% and Y 800% are available only when D-RANGE PRIORITY is selected in E
mode and an option other than d Velvia/VIVID or e ASTIA/SOFT is selected for P FILM
SIMULATION.
P FILM SIMULATION
Simulate the effects of different types of film (P 85).
Menus
(defaults to c)
87
Using the Menus: Shooting Mode
(defaults to AUTO)
D WHITE BALANCE
If AUTO does not produce natural colors (for example, when taking close-ups), select h and
measure a value for white balance or choose the option that matches the light source.
Option
AUTO
h
i
j
k
l
m
n
g
Description
White balance adjusted automatically.
Measure a value for white balance.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
For underwater photography
h: Custom White Balance
Choose h to adjust white balance for unusual lighting conditions. White balance measurement options will be displayed; frame a white object so that it fills the display and press the
shutter button all the way down to measure white balance.
• If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
• If “UNDER” is displayed, raise exposure compensation (P 36) and try again.
• If “OVER” is displayed, lower exposure compensation and try again.
R For greater precision, adjust P FILM SIMULATION, N ISO, and U DYNAMIC RANGE
before measuring white balance.
R At settings other than h, auto white balance is used with the flash.
R Results vary with shooting conditions. Play pictures back after shooting to check colors in
the display.
88
Menus
Using the Menus: Shooting Mode
y INTELLIGENT SHARPNESS
y INTELLIGENT
Select ON to process photos digitally for sharp, super high-resolution results.
R
R
R
R
(defaults to OFF)
The time needed to record images increases.
The effects are not visible in the display during shooting.
Intelligent sharpness may turn off automatically in some modes.
This option has no effect on photos taken in continuous mode.
R CONTINUOUS
R CONTINUOUS
Capture motion in a series of pictures ((P
P 42).
(defaults to OFF)
R MY LANDMARK REGISTER
R MY
P 64)
64).
Add custom landmarks to or delete them from the map database ((P
Z ADVANCED ANTI BLUR
Z ADVANCED
Select ON to enable advanced anti blur in R mode (P 24).
(defaults to ON)
b FACE DETECTION
Choose whether the camera automatically detects and sets focus and exposure for human portrait subjects (P 41).
Menus
89
Using the Menus: Shooting Mode
C PHOTOMETRY
Choose how the camera meters exposure when Intelligent Face Detection is off.
Option
o MULTI
p SPOT
q AVERAGE
(defaults to o)
Description
Automatic scene recognition is used to adjust exposure for a wide range of
shooting conditions.
The camera meters lighting conditions at the center of the frame. Recommended when the background is much brighter or darker than the main
subject.
Exposure is set to the average for the entire frame. Provides consistent exposure across multiple shots with the same lighting, and is particularly effective
for landscapes and portraits of subjects dressed in black or white.
F AF MODE
This option controls how the camera selects the focus area for photographs. Regardless of the
option selected, the camera will focus on the subject in the center of the frame when macro
mode is on.
Option
r CENTER
s MULTI
u CONTINUOUS
x TRACKING
Description
The camera focuses on the subject in the center of the frame.
When the shutter button is pressed halfway, the camera detects high-contrast
subjects near the center of the frame and selects the focus area automatically.
The camera continuously adjusts focus to reflect changes in the distance to
the subject in the focus frame.
Position the subject in the center focus area and press the selector left. Focus
will track the subject as it moves through the frame.
R Note that in u and x modes, the camera focuses continuously, increasing the drain on the
battery, and that the sound of the camera focusing may be audible.
90
Menus
Using the Menus: Shooting Mode
n FACE RECOGNITION
Add portrait subjects to the face recognition database. These subjects will be given priority
during Intelligent Face Detection, and their names and other information can be viewed during
playback (P 49).
F MOVIE AF MODE
F MOVIE
This option controls how the camera selects the focus area for movies.
Option
r CENTER
u CONTINUOUS
(defaults to r)
Description
The camera focuses on the subject in the center of the frame.
The camera continuously adjusts focus to reflect changes in the distance to
the subject in the focus frame.
R Note that in u mode, the camera focuses continuously, increasing the drain on the battery,
and that the sound of the camera focusing may be audible.
W MOVIE MODE
Choose a frame size for movies (P 66).
(defaults to i)
(defaults to ±1
±1/3)
J AE BKT EV STEPS
Choose the size of the exposure bracketing increment used when O AE BKT is selected for
R CONTINUOUS. Select from increments of +1/3 EV, +2/3 EV, and +1 EV (note that the camera
may not be able to use the selected bracketing increment if the amount of over- or under- exposure exceeds the limits of the exposure metering system).
Menus
91
Using the Menus: Playback Mode
The F-mode and playback menus are used to manage the pictures in internal memory or on the memory card.
Using the F-Mode Menu
To display F-mode menu playback options, press the
F button in playback mode. Highlight items and press
the selector right to view options, then highlight an option and press MENU/OK. Press DISP/BACK to exit when settings are complete.
F-Mode Menu Options
m PHOTOBOOK ASSIST
Create books from your favorite photos (P 55).
R LANDMARK
R
LANDMARK NAVIGATOR
P 64)
64).
View landmark information ((P
R PHOTO NAVIGATION
View the direction and distance from your present position to the location where a picture was
P 62)
62).
taken ((P
92
Menus
Using the Menus: Playback Mode
R SET-UP
Access the following GPS options (P 59)..
Option
LOCATION INFO COPY
LOCATION SEARCH
LOCATION INFO
AUTO TIME CORRECTION
TRACKING DATA
km/mile
Description
Copy GPS data from one picture to another.
Turn the GPS receiver on or off.
Display GPS data.
Use GPS data to set the camera clock.
Record GPS data.
Choose the units used to display GPS information.
(defaults to MULTIPLE)
I SLIDE SHOW
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.
Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at
any time by pressing MENU/OK.
Option
NORMAL
FADE-IN
NORMAL g
FADE-IN g
MULTIPLE
Description
Press selector left or right to go back or skip ahead one frame. Select
FADE-IN for fade transitions between frames.
As above, except that camera automatically zooms in on faces selected
with Intelligent Face detection.
Display several pictures at once.
R The camera will not turn off automatically while a slide show is in progress.
Menus
93
Using the Menus: Playback Mode
Using the Playback Menu
To display the playback menu, press MENU/OK in playback
mode. Highlight items and press the selector right to
view options, then highlight an option and press MENU/
OK. Press DISP/BACK to exit when settings are complete.
Playback Menu Options
m PHOTOBOOK ASSIST
Create books from your favorite photos (P 55).
R LANDMARK NAVIGATOR
P 64)
64).
View landmark information ((P
R LOCATION
R
LOCATION INFO COPY
P 63)
63).
Copy GPS data from one picture to another ((P
R PHOTO NAVIGATION
View the direction and distance from your present position to the location where a picture was
62).
taken (P 62
b IMAGE SEARCH
Search for pictures (P 54).
A ERASE
Delete all or selected pictures (P 53).
94
Menus
Using the Menus: Playback Mode
j MARK FOR UPLOAD TO
Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).
■ Selecting Pictures for Upload
1 Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and
movies for upload to Facebook.
2 Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press
DISP/BACK to exit when all the desired pictures are selected.
R Only movies can be selected for upload to YouTube.
R During playback, selected pictures are indicated by j YouTube or j FACEBOOK icons.
■ RESET ALL: Deselecting All Pictures
Choose RESET ALL to deselect all pictures. If the number of pictures affected is very large, a
message will be displayed while the operation is in progress. Press DISP/BACK to exit before the
operation is complete.
■ Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix
Studio.
Select with camera
Upload from computer
For information on installing MyFinePix Studio and connecting the camera to a computer, see
“Viewing Pictures on a Computer” (P 75).
Menus
95
Using the Menus: Playback Mode
I SLIDE SHOW
View pictures in an automated slide show (P 93).
(defaults to MULTIPLE)
B RED EYE REMOVAL
If the current picture is marked with a g icon to indicate that it was taken with Intelligent Face
Detection, this option can be used to remove red-eye. The camera will analyze the image; if redeye is detected, the image will be processed to create a copy with reduced red-eye.
1 Display the desired picture.
2 Select B RED EYE REMOVAL in the playback menu.
3 Press MENU/OK.
R Red eye may not be removed if the camera is unable to detect a face or the face is in profile.
Results may differ depending on the scene. Red eye can not be removed from pictures that
have already been processed using red-eye removal or pictures created with other devices.
R The amount of time needed to process the image varies with the number of faces detected.
R Copies created with B RED EYE REMOVAL are indicated by a e icon during playback.
D PROTECT
Protect pictures from accidental deletion.
1 Select D PROTECT in the playback menu.
2 Highlight one of the following options and press MENU/OK:
• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press
MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.
• SET ALL: Protect all pictures.
• RESET ALL: Remove protection from all pictures.
Q Protected pictures will be deleted when the memory card or internal memory is formatted
(P 103).
96
Menus
Using the Menus: Playback Mode
G CROP
Create a cropped copy of the current picture.
1 Display the desired picture.
2 Select G CROP in the playback menu.
3 Use the zoom control to zoom in and out and use the selector to scroll the picture until the
desired portion is displayed.
4 Press MENU/OK to display a confirmation dialog.
5 Press MENU/OK again to save the cropped copy to a separate file.
R Larger crops produce larger copies; all copies have an aspect ratio of 4 : 3. If the size of the final
copy will be a, OK will be displayed in yellow.
O RESIZE
Create a small copy of the current picture.
1 Display the desired picture.
2 Select O RESIZE in the playback menu.
3 Highlight a size and press MENU/OK to display a confirmation dialog.
4 Press MENU/OK to save the resized copy to a separate file.
R The sizes available vary with the size of the original image.
Menus
97
Using the Menus: Playback Mode
C IMAGE ROTATE
Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD
monitor.
1 Display the desired picture.
2 Select C IMAGE ROTATE in the playback menu.
3 Press the selector down to rotate the picture 90 ° clockwise, up to rotate it 90 ° counterclockwise.
4 Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it
is played back on the camera.
R Protected pictures can not be rotated. Remove protection before rotating pictures (P 96).
R The camera may not be able to rotate pictures created with other devices.
E COPY
Copy pictures from internal memory to a memory card.
1 Select E COPY in the playback menu.
2 Highlight one of the following options and press the selector right:
• a INTERNAL MEMORY y b CARD: Copy pictures from internal memory to a memory card.
• b CARD y a INTERNAL MEMORY: Copy pictures from a memory card to internal memory.
3 Highlight one of the following options and press MENU/OK:
• FRAME: Copy selected pictures. Press the selector left or right to view pictures and press
MENU/OK to copy the current picture.
• ALL FRAMES: Copy all pictures.
R Copying ends when the destination is full.
R DPOF print information is not copied (P 73).
98
Menus
Using the Menus: Playback Mode
F VOICE MEMO
Add a voice memo to the current photograph. Holding the camera at a distance of about 20 cm,
face the microphone and press MENU/OK to begin recording. Press MENU/OK again to end recording (recording ends automatically after 30 seconds).
R Voice memos can not be added to movies or protected pictures. Remove protection from
pictures before recording voice memos.
R If a voice memo already exists for the current picture, the options will be displayed. Select
RE-REC to replace the existing memo.
Playing Voice Memos
Pictures with voice memos are indicated by a q icon during playback. To play the voice
memo back, select PLAY for F VOICE MEMO in the playback menu.
R The camera may not play voice memos recorded with other devices.
R Do not cover the speaker during playback.
i ERASE FACE RECOG.
Remove face recognition links from the current image. When this option is selected, the camera will zoom in on an area in the current picture that it has matched with a face in the face
recognition database. If the match is not correct, press MENU/OK to remove the link to the face
recognition database.
R Face recognition links can not be removed from copies with a size of a or smaller.
K PRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridge-compatible devices (P 73).
Menus
99
Using the Menus: Playback Mode
J DISP ASPECT
Choose how High Definition (HD) devices display pictures with an aspect ratio of 4 : 3 (this option
is available only when an HDMI cable is connected). Select 16 : 9 to display the image so that it
fills the screen with its top and bottom cropped out, 4 : 3 to display the entire image with black
bands at either side.
16 : 9
4:3
16 : 9
4:3
R Photographs with an aspect ratio of 16 : 9 are displayed full screen, those with an aspect ratio
of 3 : 2 in a black frame.
100
Menus
The Setup Menu
Using the Setup Menu
1 Display the setup menu.
1.1 Press MENU/OK to display the menu for the current
mode.
1.2 Press the selector left to highlight the tab for the
current menu.
1.3 Press the selector down to highlight X.
SET-UP
EXIT
Tab
1.4 Press the selector right to place the cursor in the setup menu.
2 Adjust settings.
Highlight items and press the selector right to view options, then highlight an option and press MENU/OK. Press DISP/BACK to exit when settings
are complete.
Menus
101
The Setup Menu
Setup Menu Options
F DATE/TIME
Set the camera clock (P 16).
N TIME DIFFERENCE
(defaults to h)
Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between local time and your home time zone:
1 Highlight g LOCAL and press the selector right.
2 Use the selector to choose the time difference between local time and your home time zone.
3 Press MENU/OK.
To switch between local time and your home time zone, highlight g LOCAL or h HOME and
press MENU/OK.
Option
h HOME
g LOCAL
Description
Switch to the time currently selected for F DATE/TIME (see above).
Switch to local time. If this option is selected, g and the time and date will
be displayed in yellow for three seconds each time the camera is turned on.
Qa
Choose a language (P 128).
(defaults to ENGLISH)
(defaults to OFF)
o SILENT MODE
Select ON to disable the speaker, flash, and AF-assist illuminator in situations in which camera
sounds or lights may be unwelcome (note that the flash will still fire in C mode).
102
Menus
The Setup Menu
R RESET
Reset all settings except F DATE/TIME, N TIME DIFFERENCE, O BACKGROUND COLOR,
and Q VIDEO SYSTEM to default values.
1 Highlight R RESET and press the selector right to display a confirmation dialog.
2 Highlight OK and press MENU/OK.
K FORMAT
If a memory card is inserted in the camera, this option will format the memory card. If no memory card is inserted, this option will format internal memory.
Q All data—including protected pictures—will be deleted from the memory card or internal
memory. Be sure important files have been copied to a computer or other storage device.
Q Do not open the battery-chamber cover during formatting.
R SET-UP
Access the following GPS options (P 59)..
Option
LOCATION SEARCH
LOCATION INFO
AUTO TIME CORRECTION
TRACKING DATA
km/mile
Menus
Description
Turn the GPS receiver on or off.
Display GPS data.
Use GPS data to set the camera clock.
Record GPS data.
Choose the units used to display GPS information.
103
The Setup Menu
A IMAGE DISP.
Choose how long pictures are displayed in the LCD monitor after shooting.
(defaults to 1.5 SEC)
Option
3 SEC
1.5 SEC
ZOOM (CONTINUOUS)
OFF
Description
Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).
Colors may differ slightly from those in the final image.
Pictures are displayed until the MENU/OK button is pressed.
Pictures are not displayed after shooting.
R OFF has no effect in continuous shooting mode.
(defaults to CONT.)
B FRAME NO.
New pictures are stored in image files named using a four-digit file numFrame number
ber assigned by adding one to the last file number used. The file num100-0001
ber is displayed during playback as shown at right. B FRAME NO. controls whether file numbering is reset to 0001 when a new memory card Directory
File
is inserted or the current memory card or internal memory is formatted. number
number
Option
CONTINUOUS
RENEW
Description
Numbering continues from the last file number used or the first available file
number, whichever is higher. Choose this option to reduce the number of
pictures with duplicate file names.
Numbering is reset to 0001 after formatting or when a new memory card is
inserted.
R If the frame number reaches 999-9999, the shutter release will be disabled (P 123).
R Selecting R RESET (P 103) sets B FRAME NO. to CONTINUOUS but does not reset the file
number.
R Frame numbers for pictures taken with other cameras may differ.
104
Menus
The Setup Menu
G OPERATION VOL.
(defaults to c)
Adjust the volume of the sounds produced when camera controls are operated. Choose e OFF
(mute) to disable control sounds.
H SHUTTER VOLUME
(defaults to c)
Adjust the volume of the sounds produced when the shutter is released. Choose e OFF (mute)
to disable the shutter sound.
e SHUTTER SOUND
Choose the sound made by the shutter.
(defaults to i)
I PLAYBACK VOLUME
Adjust the volume for movie and voice memo playback.
(defaults to 7)
J LCD BRIGHTNESS
Control the brightness of the display.
(defaults to 0)
(defaults to 2 MIN)
N AUTO POWER OFF
Choose the length of time before the camera turns off automatically when no operations are
performed. Shorter times increase battery life; if OFF is selected, the camera must be turned
off manually. Note that in some situations the camera turns off automatically even when OFF
is selected.
Menus
105
The Setup Menu
L DUAL IS MODE
Choose from the following image stabilization options:
(defaults to L)
Option
Description
Image
stabilization
on.
If
+
MOTION
is selected, the camera will adL CONTINUOUS
CONTINUOUS + MOTION
just shutter speed to reduce motion blur when a moving objects
CONTINUOUS
l CONTINUOUS
are detected.
M SHOOTING
SHOOTING + MOTION As above, except that image stabilization is performed only when
the shutter button is pressed halfway or the shutter is released.
SHOOTING ONLY
m SHOOTING
OFF
Image stabilization off. Choose this option when using a tripod.
R + MOTION has no effect when sensitivity is set to a fixed value, and may also be unavailable
at some other combinations of settings. The effect may vary with lighting conditions and the
speed at which the object is moving.
(defaults to ON)
B RED EYE REMOVAL
Choose ON to remove red-eye effects caused by the flash when shooting with Intelligent Face
Detection.
R Red-eye reduction is performed only when a face is detected.
R Red-eye removal is not available with RAW images.
106
Menus
The Setup Menu
(defaults to OFF)
R INTELLIGENT DIGITAL ZOOM
If ON is selected, selecting i at the maximum optical zoom position triggers intelligent digital
zoom, further magnifying the image while processing it for sharp, high-resolution results.
The Zoom Indicator
j
INTELLIGENT DIGITAL
ZOOM on
i
Optical zoom
j
INTELLIGENT DIGITAL
ZOOM off
R
R
R
R
R
Intelligent
digital zoom
i
Optical zoom
Intelligent digital zoom may end when another mode is selected.
Intelligent digital zoom may sometimes produce lower quality images than optical zoom.
The time needed to record images increases.
The effects are not visible in the display during shooting.
Intelligent digital zoom is not available in continuous mode or during movie recording.
(defaults to ON)
C AF ILLUMINATOR
If ON is selected, the AF-assist illuminator will light to assist autofocus.
Q The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is unable to focus in macro mode, try increasing the distance to the subject.
Q Avoid shining the AF-assist illuminator directly into your subject’s eyes.
Menus
107
The Setup Menu
(defaults to OFF)
j RAW
Choose RAW+JPEG or RAW to record RAW pictures (note that because RAW data are not processed on the camera, RAW pictures must be copied to a computer for processing). If RAW+JPEG
is selected, JPEG copies will also be recorded. Choose OFF to record pictures in JPEG format only.
R To convert RAW files for display on a computer, use the supplied RAW File Converter software.
Q Crop, resize, and red-eye removal are not available with RAW images. The maximum zoom
available when viewing RAW images is 3.2 ×.
(defaults to OFF)
t SAVE ORG IMAGE
Choose ON to save unprocessed copies of seamless z panoramas or pictures taken using
B RED EYE REMOVAL, j PRO LOW-LIGHT MODE, or i PRO FOCUS MODE.
(defaults to ON)
m AUTOROTATE PB
Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.
O BACKGROUND COLOR
Choose a color scheme.
c GUIDANCE DISPLAY
Choose whether to display tool tips.
108
(defaults to ON)
Menus
The Setup Menu
Q VIDEO SYSTEM
Choose a video mode for connection to a TV.
Option
NTSC
PAL
Description
Select this mode for connection to video devices in North America, the Caribbean, parts of Latin America, and some East Asian countries.
Select this mode for connection to video devices in the United Kingdom and
much of Europe, Australia, New Zealand, and parts of Asia and Africa.
x POWER MANAGEMENT
Optimize camera performance for increased battery life or display quality.
(defaults to n)
Option
Description
Reduces display refresh rate. The display dims to save power if no operations
n POWER SAVE are performed for a short period, but can be restored by operating camera
controls. Select this option to save power.
Choose this option for a brighter, higher quality display and for a longer delay
o CLEAR DISPLAY
before the monitor dims to save power.
R n POWER SAVE does not take effect when Intelligent Face Detection is on.
Menus
109
The Setup Menu
(defaults to OFF)
S WATERPROOF CASE
Select ON when using the camera with an optional waterproof case. The lens will remain extended when the camera is turned off.
R If you will be using the flash under water, raise it before selecting ON.
R The lens and flash will not retract during playback while ON is selected.
R Select OFF when the camera is not in a waterproof case. Failure to observe this precaution
could result in product malfunction.
Exposure
Exposure can not be adjusted if mode M is selected when the camera is in a waterproof case.
In modes S and A, exposure can be adjusted by pressing the selector up to display exposure
options. You can then press the selector left or right to choose shutter speed or aperture and
up or down to adjust exposure compensation.
R DEMONSTRATION
Choose ON for a GPS demo. This option should normally be left OFF.
110
(defaults to OFF)
Menus
Technical Notes
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other
manufacturers.
■ Printing
DIGITAL CAMERA
FINEPIX F600EXR
■ Audio/Visual
A/V cable (supplied)
USB cable
(supplied)
PictBridge-compatible
printer *
TV *
SD/SDHC/SDXC
memory card
Printer *
HDMI cable
(sold separately)
HDTV *
■ Computer Related
USB cable (supplied)
SD card slot or card reader
Computer *
* Available separately.
111
Optional Accessories
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your
local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_
cameras/index.html.
Rechargeable NP-50: Additional large-capacity NP-50 rechargeable batLi-ion batteries teries can be purchased as required.
Battery
chargers
BC-45W: Replacement battery chargers can be purchased
as required. The BC-45W charges an NP-50 battery in
about 150 minutes at +20 °C (+68 °F).
AC power
adapters
AC-5VX (requires CP-50 DC coupler): Use for extended playback or
when copying pictures to a computer (shape of adapter
and plug vary with region of sale).
DC couplers
CP-50: Connect the AC-5VX to the camera.
112
Technical Notes
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
If the camera will not be used for an
extended period, remove the battery
and memory card. Do not store or
use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very
high temperatures, such as in a
closed vehicle on a sunny day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic fields,
such as near a broadcasting antenna, power line, radar emitter, motor,
transformer, or magnet
• in contact with volatile chemicals
such as pesticides
• next to rubber or vinyl products
Technical Notes
■ Water and Sand
Exposure to water and sand can also
damage the camera and its internal
circuitry and mechanisms. When using the camera at the beach or seaside, avoid exposing the camera to
water or sand. Do not place the camera on a wet surface.
■ Condensation
Sudden increases in temperature,
such as occur when entering a heated
building on a cold day, can cause condensation inside the camera. If this
occurs, turn the camera off and wait
an hour before turning it on again. If
condensation forms on the memory
card, remove the card and wait for the
condensation to dissipate.
113
Caring for the Camera
Cleaning
Use a blower to remove dust from the lens and LCD monitor, then gently wipe
with a soft, dry cloth. Any remaining stains can be removed by wiping gently
with a piece of FUJIFILM lens-cleaning paper to which a small amount of lenscleaning fluid has been applied. Care should be taken to avoid scratching the
lens or LCD monitor. The camera body can be cleaned with a soft, dry cloth.
Do not use alcohol, thinner, or other volatile chemicals.
Traveling
Keep the camera in your carry-on baggage. Checked baggage may suffer
violent shocks that could damage the camera.
114
Technical Notes
Troubleshooting
Problems and Solutions
Power and Battery
Problem
The camera does not
turn on.
•
•
•
•
•
•
•
The battery runs down
quickly.
•
•
•
•
The camera turns off
suddenly.
•
•
•
Solution
The battery is exhausted
exhausted:: Charge the battery or insert a fully-charged spare battery ((P
P 7).
The battery is inserted incorrectly:
incorrectly: Reinsert in the correct orientation (P
(P 9).
The battery-chamber cover is not latched
latched:: Latch the battery-chamber cover (P
(P 9).
The AC power adapter and DC coupler are connected incorrectly:
incorrectly: Reconnect the AC power
adapter and DC coupler.
The battery is cold
cold:: Warm the battery by placing it in a pocket or other warm place and reinsert
it in the camera immediately before taking a picture.
There is dirt on the battery terminals
terminals:: Clean the terminals with a soft, dry cloth.
o CLEAR DISPLAY is selected for x POWER MANAGEMENT
MANAGEMENT:: Select n POWER
SAVE to reduce the drain on the battery (P
(P 109).
R is selected for shooting mode
mode:: Select B mode to reduce the drain on the battery ((P
P 22).
u CONTINUOUS or x TRACKING is selected for F AF MODE:
MODE: Select a different AF mode (P
(P 90).
The battery has been charged many times
times:: The battery has reached the end of its charging
life. Purchase a new battery.
PERMANENTLY ON is selected for R LOCATION SEARCH
SEARCH:: Select WHEN
SWITCHED ON or OFF ((P
P 59, 85).
R TRACKING DATA is on:
on: Turn R TRACKING DATA off (P
(P 59, 85).
The battery is exhausted
exhausted:: Charge the battery or insert a fully-charged spare battery ((P
P 7).
The AC power adapter or DC coupler has been disconnected:
disconnected: Reconnect the AC power
adapter and DC coupler.
115
Problems and Solutions
Problem
Solution
Charging does not start. Reinsert the battery in the correct orientation and make sure that the charger is plugged in ((P
P 7).
Charging is slow.
Charge the battery at room temperature (P
(P vi).
• There is dirt on the battery terminals
terminals:: Clean the terminals with a soft, dry cloth.
The charging lamp lights,
• The battery has been charged many times
times:: The battery has reached the end of its charging
but the battery does not
life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.
charge.
• The battery is too hot or too cold
cold:: Wait for the battery temperature to stabilize (P
(P 7).
Menus and Displays
Problem
Menus and displays are
not in English.
Solution
Select ENGLISH for Q a ((P
P 16, 102).
Shooting
Problem
•
•
•
No picture is taken when
•
the shutter button is
•
pressed.
•
•
The LCD monitor goes
dark after shooting.
116
Solution
Memory is full:
full: Insert a new memory card or delete pictures ((P
P 10, 53).
Memory is not formatted:
formatted: Format the memory card or internal memory ((P
P 103).
There is dirt on the memory card contacts
contacts:: Clean the contacts with a soft, dry cloth.
The memory card is damaged
damaged:: Insert a new memory card (P
(P 10).
The battery is exhausted
exhausted:: Charge the battery or insert a fully-charged spare battery ((P
P 7).
The camera has turned off automatically:
automatically: Turn the camera on ((P
P 14).
The indicator lamp was orange when you attempted to record a panorama
panorama:: Wait until
the indicator lamps turns off (P
(P 3).
The LCD monitor may darken while the flash charges. Wait for the flash to charge ((P
P 38).
Troubleshooting
Problems and Solutions
Problem
The camera does not
focus.
Pictures are not the
same size.
Macro mode is not
available.
Solution
• The subject is close to the camera
camera:: Select macro mode (P
(P 37).
• The subject is far away from the camera
camera:: Cancel macro mode (P
(P 37).
• The subject is not suited to autofocus
autofocus:: Use focus lock ((P
P 34).
If S is selected for O IMAGE SIZE in R mode, the camera will optimize not only sensitivity and other settings, but also image size. To record all pictures at the same size, choose another
shooting mode or select another option for O IMAGE SIZE ((P
P 84).
Choose a different shooting mode ((P
P 22).
Only one picture will be taken if the self-timer is on when L is selected for R CONTINUOUS.. Turn the self-timer off ((P
OUS
P 42).
• The camera is slow to acquire GPS data
data:: Some time may be needed to acquire GPS data
immediately after the camera or R LOCATION SEARCH is turned on or if the camera has
GPS
been unable to acquire GPS data for an extended period (P
(P 59, 85).
• Location data are incorrect
incorrect:: Select OFF for R DEMONSTRATION ((P
P 110).
Intelligent Face Detection Intelligent Face Detection is not available in the current shooting mode:
mode: Choose a differis not available.
ent shooting mode (P
(P 22).
• The subject’s face is obscured by sunglasses, a hat, long hair, or other objects:
objects: Remove
the obstructions.
• The subject’s face occupies only a small area of the frame
frame:: Change the composition so that
No face is detected.
the subject’s face occupies a larger area of the frame ((P
P 34).
• The subject’s head is tilted or horizontal
horizontal:: Ask the subject to hold their head straight.
• The camera is tilted
tilted:: Keep the camera level (P
(P 18).
• The subject’s face is poorly lit
lit:: Shoot in bright light.
Wrong subject is
The selected subject is closer to the center of the frame than the main subject. Recompose the
selected.
picture or turn face detection off and frame the picture using focus lock (P
(P 34).
Only one picture is taken.
Troubleshooting
117
Problems and Solutions
Problem
Solution
• The flash is not available in the current shooting mode
mode:: Choose a different shooting mode
(P 22).
• The battery is exhausted
exhausted:: Charge the battery or insert a fully-charged spare battery ((P
P 7).
The flash does not fire.
• The camera is in continuous mode
mode:: Select OFF for R CONTINUOUS ((P
P 42).
• The camera is in silent mode
mode:: Turn silent mode off (P
(P 102).
• The flash is not raised
raised:: Raise the flash (P
(P 38).
• The desired flash mode is not available in the current shooting mode
mode:: Choose a different
Some flash modes are
shooting mode (P
(P 22).
not available.
• The camera is in silent mode
mode:: Turn silent mode off (P
(P 102).
• The subject is not in range of the flash
ash:: Position the subject in range of the flash (P
(P 127).
The flash does not fully
• The flash window is obstructed
obstructed:: Hold the camera correctly ((P
P 18).
light the subject.
• Fast shutter speed selected:
selected: Choose a slower shutter speed ((P
P 32, 33).
• The lens is dirty
dirty:: Clean the lens ((P
P 114).
• The lens is blocked
blocked:: Keep objects away from the lens (P
(P 18).
Pictures are blurred.
• s is displayed during shooting and the focus frame is displayed in red:
red: Check focus
before shooting ((P
P 121).
• k is displayed during shooting:
shooting: Use the flash or a tripod (P
(P 39).
• A slow shutter speed is selected at high temperatures:
temperatures: This is normal and does not indicated a malfunction.
Pictures are mottled.
• The camera has been used continuously at high temperatures or a temperature warning is displayed:
displayed: Turn the camera off and wait for it to cool down.
Power was interrupted during shooting. Before connecting the AC power adapter or DC coupler,
Pictures are not recorded. turn the camera off. Leaving the camera on can result in corrupted files or damage to the memory
card or internal memory.
118
Troubleshooting
Problems and Solutions
Problem
Solution
• u CONTINUOUS is selected for F MOVIE AF MODE
MODE:: Select a different AF mode
Sounds made by the
(P 91).
camera are recorded with
• Zoom was adjusted during shooting
shooting:: Do not adjust zoom during shooting.
movies.
• Intelligent Face Detection is on:
on: Turn Intelligent Face Detection off (P
(P 41).
Playback
Problem
Pictures are grainy.
Solution
The pictures were taken with a different make or model of camera.
• Playback volume is too low:
low: Adjust playback volume (P
(P 105).
No sound in movie
• The microphone was obstructed
obstructed:: Hold the camera correctly during recording ((P
P 18, 38).
playback.
• The speaker is obstructed
obstructed:: Hold the camera correctly during playback ((P
P 68).
Selected pictures are not Some of the pictures selected for deletion are protected. Remove protection using the device with
deleted.
which it was originally applied (P
(P 96).
File numbering is
The battery-chamber cover was opened while the camera was on. Turn the camera off before
unexpectedly reset.
opening the battery-chamber cover (P
(P 14).
Connections/Miscellaneous
Problem
No picture or sound.
No color
Troubleshooting
Solution
• The camera is not properly connected
connected:: Connect the camera properly (P
(P 69).
• An A/V cable was connected during movie playback
playback:: Connect the camera once movie playback has ended.
• Input on the television is set to “TV”:
“TV”: Set input to “VIDEO”.
• The camera is not set to the correct video standard:
standard: Match the camera Q VIDEO SYSTEM setting to the TV (P
(P 109).
• The volume on the TV is too low:
low: Adjust the volume.
Match the camera Q VIDEO SYSTEM setting to the TV (P
(P 109).
119
Problems and Solutions
Problem
The computer does not
recognize the camera.
Can not transfer RAW or
JPEG files to computer.
Pictures can not be
printed.
Only one copy is printed/
the date is not printed.
The camera is unresponsive.
The camera does not
function as expected.
I want to use an AC power
adapter and DC coupler
overseas.
No sound.
The lens does not retract
when the camera is
turned off.
120
Solution
Be sure the camera and computer are correctly connected ((P
P 80).
Use the bundled software to transfer pictures (P
(P 75).
• The camera is not properly connected
connected:: Connect the camera correctly (P
(P 71).
• The printer is off: Turn the printer on.
The printer is not PictBridge compatible.
• Temporary camera malfunction
malfunction:: Remove and reinsert the battery ((P
P 9) or disconnect and
reconnect the AC power adapter/DC coupler.
• The battery is exhausted
exhausted:: Charge the battery ((P
P 7) or insert a fully-charged spare battery
(P 9).
Remove and reinsert the battery (P
(P 9) or disconnect and reconnect the AC power adapter/DC
coupler. If the problem persists, contact your FUJIFILM dealer.
Check the label on the AC power adapter. The AC power adapter can be used with voltages of
100 – 240 V. Consult your travel agent for information on plug adapters.
Turn silent mode off (P
(P 102).
Select OFF for S WATERPROOF CASE ((P
P 110).
Troubleshooting
Warning Messages and Displays
The following warnings are displayed in the LCD monitor:
Warning
B ((red
red))
A ((blinks
blinks red)
red)
k
Description
Low battery. Charge the battery ((P
P 7) or insert a fully-charged spare battery ((P
P 9).
Battery exhausted. Charge the battery (P
(P 7) or insert a fully-charged spare battery ((P
P 9).
Slow shutter speed. Pictures may be blurred; use the flash or a tripod.
The camera can not focus. Try one of the following solutions:
s
• Use focus lock to focus on another subject at the same distance, then recompose the picture
(displayed in red with red
(P 34).
focus frame)
frame)
• Use macro mode to focus when taking close-ups (P
(P 37).
Aperture or shutter speed The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject
displayed in red
is dark, use the flash (P
(P 38).
FOCUS ERROR
Camera malfunction or moving parts of lens obstructed. Turn the camera off and then on again,
TURN OFF THE CAMERA
taking care not to touch the lens. If the message persists, contact a FUJIFILM dealer.
AND TURN ON AGAIN
• The memory card or internal memory is not formatted or the memory card was formatted in a computer or other device
device:: Format the memory card or internal memory using
the K FORMAT option in the camera setup menu (P
(P 103).
CARD NOT INITIALIZED
• The memory card contacts require cleaning
cleaning:: Clean the contacts with a soft, dry cloth. If
the message is repeated, format the card (P
(P 103). If the message persists, replace the card.
• Camera malfunction:
malfunction: Contact a FUJIFILM dealer.
PROTECTED CARD
The memory card is locked. Unlock the card ((P
P 10).
BUSY
The memory card is incorrectly formatted. Use the camera to format the card (P
(P 103).
Turn the camera off and wait for it to cool. If no action is taken, the camera will turn off autop
matically.
Troubleshooting
121
Warning Messages and Displays
Warning
CARD ERROR
a MEMORY FULL
b MEMORY FULL
INTERNAL MEMORY IS
FULL
INSERT A NEW CARD
WRITE ERROR
READ ERROR
122
Description
The memory card is not formatted for use in the camera. Format the card (P
(P 103).
The memory card contacts require cleaning or the memory card is damaged. Clean the contacts
with a soft, dry cloth. If the message is repeated, format the card (P
(P 103). If the message persists,
replace the card.
Incompatible memory card. Use a compatible card (P
(P 12).
Camera malfunction. Contact a FUJIFILM dealer.
The memory card or internal memory is full and pictures can not be recorded or copied. Delete
pictures or insert a memory card with more free space.
• Memory card error or connection error
error:: Reinsert the card or turn the camera off and then
on again. If the message persists, contact a FUJIFILM dealer.
• Not enough memory remaining to record additional pictures
pictures:: Delete pictures or insert
a memory card with more free space.
• The memory card or internal memory is not formatted:
formatted: Format the memory card or
internal memory (P
(P 103).
• The file is corrupt or was not created with the camera
camera:: The file can not be viewed.
• The memory card contacts require cleaning
cleaning:: Clean the contacts with a soft, dry cloth. If
the message is repeated, format the card (P
(P 103). If the message persists, replace the card.
• Camera malfunction:
malfunction: Contact a FUJIFILM dealer.
Troubleshooting
Warning Messages and Displays
Warning
FRAME NO. FULL
Description
The camera has run out of frame numbers (current frame number is 999-9999). Format the
memory card and select RENEW for B FRAME NO. Take a picture to reset frame numbering to 100-0001, then select CONTINUOUS for B FRAME NO. ((P
P 104).
PRESS AND HOLD
An attempt was made to choose a flash mode or adjust the volume with the camera in silent
THE DISP BUTTON TO
mode. Exit silent mode before choosing a flash mode or adjusting the volume ((P
P 102).
DEACTIVATE SILENT MODE
• A search has returned more than 30,000 results
results:: Choose a search that returns fewer
TOO MANY FRAMES
results.
• More than 999 images are selected for deletion
deletion:: Choose fewer images.
An attempt was made to delete, rotate, or add a voice memo to a protected picture. Remove
PROTECTED FRAME
protection and try again (P
(P 96).
a pictures can not be cropped.
a CAN NOT CROP
CAN NOT CROP
The picture is damaged or was not created with the camera.
P CANNOT EXECUTE
An attempt was made to create a resized copy at a size equal to or larger than the original.
Q CANNOT EXECUTE
Choose a smaller size.
a CANNOT EXECUTE
CAN NOT ROTATE
An attempt was made to rotate a picture that can not be rotated.
F CAN NOT ROTATE Movies can not be rotated.
m CANNOT EXECUTE Red-eye removal can not be applied to the selected picture.
F CANNOT EXECUTE Red-eye removal can not be applied to movies.
NO CARD
No memory card inserted when E COPY is selected. Insert a memory card.
Troubleshooting
123
Warning Messages and Displays
Warning
b NO IMAGE
a NO IMAGE
Description
The source selected for E COPY contains no images. Select a different source.
• The voice memo file is corrupt
corrupt:: The voice memo can not be played back.
• Camera malfunction:
malfunction: Contact a FUJIFILM dealer.
The DPOF print order on the current memory card contains more than 999 images. Copy the
DPOF FILE ERROR
pictures to internal memory and create a new print order.
CAN NOT SET DPOF
The picture can not be printed using DPOF.
F CAN NOT SET DPOF Movies can not be printed using DPOF.
A connection error occurred while pictures were being printed or copied to a computer or other
COMMUNICATION ERROR
device. Confirm that the device is turned on and that the USB cable is connected.
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details).
PRINTER ERROR
To resume printing, turn the printer off and then turn it back on.
PRINTER ERROR
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If
RESUME?
printing does not resume automatically, press MENU/OK to resume.
An attempt was made to print a movie, a picture not created with the camera, or a picture in a
format not supported by the printer. Movies and some pictures created with other devices can
CANNOT BE PRINTED not be printed; if the picture is a still picture created with the camera, check the printer manual
to confirm that the printer supports the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures
can not be printed.
u ERROR
124
Troubleshooting
Appendix
Internal Memory/Memory Card Capacity
The following table shows the recording time or number of pictures available
at different image sizes. All figures are approximate; file size varies with the
scene recorded, producing wide variations in the number of files that can be
stored, and the number of exposures or length remaining may not diminish at an even rate. A limited number of test pictures can be taken when no
memory card is inserted.
Medium
O
Photographs
Movies
T
O 4 : 3
O 16 : 9
P 4 : 3
P 16 : 9
Q 4 : 3
Q 16 : 9
i 1920 1
h 1280 1
f2
k 640 640 ×
× 480 3
k 320 320 ×
× 240 3
k 320 320 ×
× 112 3
Internal memory
(approx. 33 MB)
FINE
NORMAL
5
8
6
11
8
16
11
21
16
31
30
45
17 sec.
22 sec.
56 sec.
42 sec.
85 sec.
42 sec.
4 GB
FINE
610
810
970
1280
1900
3470
NORMAL
970
1290
1900
2480
3570
5060
37 min.
48 min.
113 min.
84 min.
168 min.
84 min.
8 GB
FINE
1240
1650
1970
2590
3850
7040
NORMAL
1970
2620
3850
5030
7250
10270
76 min.
98 min.
229 min.
171 min.
342 min.
171 min.
1 Use a G card or better. Individual movies can not exceed 29 minutes in length.
2 Individual movies can not exceed 115 minutes in length.
3 Use a G card or better. Individual movies can not exceed 30 seconds in length.
125
Specifications
System
Model
Effective pixels
Image sensor
Storage media
File system
File format
Image size (pixels)
Lens
Focal length
Digital zoom
Aperture
Focus range
(distance from front of lens)
126
Digital Camera FinePix F600EXR
16 million
1/2 -in., EXR CMOS with primary color filter
• Internal memory (approx. 33 MB)
• SD/SDHC/SDXC memory cards
Compliant with Design Rule for Camera File System (DCF)
(DCF),, Exif 2.3, and Digital Print Order
Format (DPOF)
• Still pictures:
pictures: Exif 2.3 JPEG (compressed)
(compressed);; RAW (original RAF format, special-purpose software
required);; RAW+JPG available
required)
• Movies
Movies:: MOV (H.264)
• Audio
Audio:: WAV
• O 4 : 3:
3: 4,608 × 3,456
• O 3 : 2:
2: 4,608 × 3,072
• O 16 : 9:
9: 4,608 × 2,592
• P 4 : 3:
3: 3,264 × 2,448
• P 3 : 2:
2: 3,264 × 2,176
• P 16 : 9:
9: 3,264 × 1,840
• Q 4 : 3:
3: 2,304 × 1,728
• Q 3 : 2:
2: 2,304 × 1,536
• Q 16 : 9:
9: 1,920 × 1,080
• r MOTION PANORAMA v: 1,624 × 11,520 (tall)
(tall)/11,520
/11,520 × 1,080 (wide)
• r MOTION PANORAMA w: 1,624 × 5,760 (tall)
(tall)/5,760
/5,760 × 1,080 (wide)
• r MOTION PANORAMA x: 1,624 × 3,840 (tall)
(tall)/3,840
/3,840 × 1,080 (wide)
• r MOTION PANORAMA z: 1,624 × 11,520 (tall)
(tall)/11,520
/11,520 × 1,080 (wide)
Fujinon 15 × optical zoom lens, F3.5 (wide angle) – F5.3 (telephoto)
f=4.4 mm–66.0 mm (35-mm format equivalent: 24 mm–360 mm)
Up to about 3.4 × with intelligent digital zoom (up to 51 × when combined with optical zoom)
F3.5/F7.1/F10.0 (wide angle),
angle), F5.3/F11.0/F16.0 (telephoto)
(telephoto);; uses Neutral Density (ND
(ND)) filter
Approx. 45 cm (1.4 ft.)–infinity (wide angle);
angle); 2.5 m (8.2 ft.)–infinity (telephoto)
• Macro
Macro:: approx. 5 cm–3.0 m/1.9 in.–9.8 ft. (wide angle);
angle); 1.2 m–3.0 m/3.9 ft.–9.8 ft. (telephoto)
Appendix
Specifications
System
Sensitivity
Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200, 6400 (image size
P or Q), 12800 (image size Q); AUTO, AUTO (400), AUTO (800), AUTO (1600), AUTO (3200)
Metering
256-segment throughhrough-tthehe-llens (TTL) metering; MULTI, SPOT, AVERAGE
Exposure control
Programmed AE; aperture-priority AE; shutter-priority AE; manual exposure
Exposure compensation –2 EV – +2 EV in increments of 1/3 EV
Picture stabilization
Optical stabilization (image-sensor shift)
Shutter speed (combined 8 s–1
s–1/2,000 s
mechanical and electronic
• O: ¼ s–1
s–1/1,000 s
• H: 3 s–1
s–1/1,000 s
• p: 4 s–½ s
shutter)
• S: 2 s–1
s–1/2,000 s
• Other modes: ¼ s–1
s–1/2,000 s
Continuous
• I: Up to 32 frames at 3, 5, 8, or 11 fps
• P: 8 or 16 frames at 3, 5, 8, or 11 fps
Focus
• Mode
Mode:: Center AF, multi AF, continuous AF, tracking AF
• Autofocus system:
system: Contrast-detect TTL AF
White balance
Custom, auto, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white
fluorescent, incandescent, underwater
Self-timer
Off, 2 sec., 10 sec.; auto shutter release (n and o)
Flash
Auto flash; effective range when sensitivity is set to AUTO is approx. 15 cm–3.2 m/0.4 ft.–10.4 ft.
(wide angle; note that lens may block flash at short ranges),
ranges), 90 cm–1.9 m/2.9 ft.–6.2 ft. (telephoto)
Flash mode
Auto, fill flash, off, slow sync (red-eye removal off );); auto with red-eye removal, fill flash with redeye removal, off, slow sync with red-eye removal (red-eye removal on)
Appendix
127
Specifications
System
LCD monitor
Movies
3.0-in., 460k-dot color LCD monitor; frame coverage approx. 100%
• i 1920
1920:: 1,920 × 1,080 (1080p)
(1080p),, 30 fps
• h 1280
1280:: 1,280 × 720 (720p)
(720p),, 30 fps
• f: 640 × 480 (VGA)
(VGA),, 30 fps
• k 640
640×
×480
480:: 80 fps
• k 320
320×
×240
240:: 160 fps
• k 320
320×
×112
112:: 320 fps
Note:: i, h, and f movies are recorded with stereo sound.
Note
Languages
Arabic, Bulgarian, Simplified Chinese, Traditional Chinese, Czech, Danish, Dutch, English, Farsi,
Finnish, French, German, Greek, Hebrew, Hungarian, Indonesian, Italian, Japanese, Kazakh,
Korean, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian,
Slovak, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese
Date map database was October 2010
created
Input/output terminals
A/V OUT (audio/video output) NTSC or PAL output with monaural sound
Digital input/output
USB 2.0 High-Speed; shares A/V OUT connector; MTP/PTP
HDMI output
HDMI mini connector
128
Appendix
Specifications
Power supply/other
Power supply
• NP-50 rechargeable battery
• AC-5VX AC power adapter and CP-50 DC coupler (sold separately)
Battery life (approximate
Battery type
Approximate number of frames
number of frames that can
NP-50 (type supplied with camera)
300
be taken with a fully-charged
CIPA standard, measured in B (auto) mode using battery supplied with camera and SD memory card.
battery)
Note: Number of shots that can be taken with battery varies with battery charge level and will
Note:
decline at low temperatures.
Dimensions (W × H × D) 103.5 mm × 62.5 mm × 32.6 mm/4.0 in. × 2.4 in. × 1.2 in., excluding projections
(minimum depth 22.9 mm/0.9 in.)
Shooting weight
Approx. 220 g/7.7 oz., including battery and memory card
Camera weight
Approx. 201 g/7.0 oz., excluding battery, accessories, and memory card
Operating conditions
• Temperature
Temperature:: 0 °C – +40 °C/+32 °F – +104 °F
• Humidity
Humidity:: 10–80% (no condensation)
Appendix
129
Specifications
NP-50 rechargeable battery
Nominal voltage
DC 3.6 V
Nominal capacity
1000 mAh
Operating temperature 0 °C – +40 °C/+32 °F – +104 °F
Dimensions (W × H × D) 35.4 mm × 40.0 mm × 6.6 mm/1.3 in. × 1.5 in. × 0.2 in.
Weight
Approx. 18 g/0.6 oz.
BC-45W battery charger
Rated input
Input capacity
Rated output
Supported batteries
Charging time
Dimensions (W × H × D)
Weight
Operating temperature
100 V–240 V AC, 50/60 Hz
• 100 VV:: 8.0 VA
• 240 V:
V: 12 VA
4.2 V DC, 550 mA
NP-50 rechargeable batteries
Approx. 150 minutes (+20 °C/+68 °F)
91 mm × 62 mm × 23 mm/3.5 in. × 2.4 in. × 0.9 in., excluding projections
Approx. 67 g/2.3 oz., excluding battery
0 °C – +40 °C/+32 °F – +104 °F
Weight and dimensions vary with the country or region of sale.
130
Appendix
Specifications
■ Notices
• Specifications subject to change without notice; for the latest information, visit http://
www.fujifilm.com/products/digital_cameras/index.html. FUJIFILM shall not be held liable for damages resulting from errors in this manual.
• Although the LCD monitor is manufactured using advanced high-precision technology, small bright points and anomalous colors may appear, particularly in the vicinity
of text. This is normal for this type of LCD monitor and does not indicate a malfunction; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g.,
electric fields, static electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images.
This is normal.
Appendix
131
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Restrictions on Camera Settings
The options available in each shooting mode are listed below.
Shooting Mode
Option
BOFF
N
BON
h
F
N
O
Q
N
O
K
L
M
P
S/R
o
n
F
OFF
d
AUTO
AUTO (3200)
AUTO (1600)
AUTO (800)
AUTO (400)
12800 2
6400 3
3200
1600
800
400
200
100
S
O
P
Q
T
E
RS T
✔ ✔ ✔
✔ ✔ ✔
✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
Adv.
U B rij M A
✔
✔
✔ ✔
✔
✔
✔
✔ ✔
✔
✔1 ✔ ✔1 ✔1 ✔1 ✔ ✔
✔ ✔
✔ ✔ ✔ ✔
✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔
✔ ✔
✔1
✔1 ✔1
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
S P
✔
✔ ✔
✔
✔
✔ ✔
✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔
✔ ✔
✔1
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
✔ ✔
✔
✔ ✔ ✔ ✔
✔ ✔4 ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔
✔
✔
✔
✔
CD h
✔
✔1
✔
✔
✔
✔1
✔
✔
1
✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Z lm M
✔ ✔ ✔
✔ ✔ ✔
✔
✔
✔
✔
✔ ✔ ✔ ✔1
✔ ✔ ✔ ✔
✔
✔ ✔
✔
✔ ✔
✔
✔ ✔
✔ ✔ ✔ ✔ ✔ ✔
1
1
1
✔ ✔ ✔ ✔1 ✔1 ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
SP
N O H p QRsf U V WF
✔
✔ ✔ ✔ ✔1
✔
✔ ✔ ✔ ✔
✔
✔ ✔
✔ ✔
✔1
✔ ✔ ✔
✔ ✔
1
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔1 ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔
✔ ✔ ✔
✔
✔
✔1 ✔1
✔
✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔5
✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Restrictions on Camera Settings
Shooting Mode
Option
AUTO
V
W
X
Y
Z
c
d
e
b
f
U
P
D
y
O
X
Y
P
L
OFF
R
Z
OFF
ON
o
p
q
r
s
u
x
b
C
F
n
F
r
u
E
Adv.
R S T U B rij
✔1
✔ ✔1 ✔1 ✔1 ✔1
✔1 ✔1 ✔
✔
✔
✔
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔
✔
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔1 ✔1 ✔1
✔
✔ ✔ ✔ ✔ ✔1 ✔ ✔
✔1 ✔ ✔ ✔ ✔
✔ ✔
1
✔ ✔ ✔ ✔ ✔1 ✔1 ✔1 ✔1
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔ ✔ ✔1 ✔1 ✔1
✔ ✔ ✔
1
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔
✔ ✔
SP
M A S P CD h Z lm M N O H p Q R s f U V W F
✔
✔ ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
✔ ✔ ✔1 ✔
✔ ✔
✔
✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔
✔ ✔
✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔
✔ ✔
✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔
✔1 ✔1 ✔ ✔ ✔1 ✔ ✔ ✔ ✔1 ✔ ✔1 ✔1 ✔5
✔ ✔ ✔ ✔1 ✔1 ✔1
✔ ✔
✔ ✔ ✔
✔
✔5
1
1
1
1
1
1
✔ ✔ ✔ ✔ ✔ ✔ ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔5
✔
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔5
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔5
✔5
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
✔ ✔ ✔ ✔
✔ ✔
✔ ✔ ✔
✔
✔
✔
Restrictions on Camera Settings
W
L
R
B
C
j
S
1
2
3
4
5
Option
i1920
h1280
f
k 640×480
k 320×240
k 320×112
J
M
L
l
M
m
OFF
ON
OFF
ON
OFF
ON
OFF
RAW+JPEG
RAW
OFF
n
o
Shooting Mode
E
Adv.
SP
R S T U B rij M A S P CD h Z l m M N O H p Q R s f U V W F
✔
✔
✔
✔
✔
✔
✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔1 ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
1
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔1 ✔1 ✔1 ✔ ✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔1
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔1 ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔
✔ ✔ ✔
✔ ✔5
✔ ✔ ✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔1 ✔1 ✔ ✔ ✔1 ✔1 ✔ ✔ ✔ ✔1 ✔1 ✔ ✔5
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔1 ✔1 ✔1 ✔ ✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Automatically optimized for selected shooting mode.
Image sizes over Q are set to Q.
Image sizes over P are set to P.
Aspect ratio fixed at 4 : 3.
Fixed at settings before recording a movie.