FujiFilm F650 Digital Camera User Manual

Getting Ready
Using the Camera
Advanced Features
• Photography
• Playback
OWNER’S MANUAL
This manual will show you how to use
your FUJIFILM DIGITAL CAMERA
FinePix F650 correctly.
Please follow the instructions carefully.
• Movie
Settings
Camera Connection
Software
Installation
Appendices
Troubleshooting
BL00541-201(1)
Warning
To prevent fire or shock hazard, do not expose the unit to rain
or moisture.
For customers in Canada
For customers in the U.S.A.
This Class B digital apparatus complies with Canadian ICES-003.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for
help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void the user’s authority to operate
the equipment.
Notes on the Grant:
To comply with Part 15 of the FCC Rules, this product must be used
with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC
supply cord.
2
CAUTION
Please read the Safety Notes (➝p.144) and make
sure you understand them before using the camera.
IMPORTANT
NOTICE
BEFORE OPENING THE CD-ROM PROVIDED BY FUJI PHOTO FILM
CO., LTD., PLEASE READ THIS END USER LICENSE AGREEMENT
CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,
SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.
BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE
BOUND BY THIS AGREEMENT.
End User License Agreement
This End User License Agreement (“Agreement”) is an agreement between
Fuji Photo Film Co., Ltd. (“FUJIFILM”) and you, which sets forth the terms
and conditions of the license granted for you to use the software provided
by FUJIFILM.
The CD-ROM contains third party software. In case a separate agreement
is provided by a third party supplier for its software, the provisions of such
separate agreement shall apply to the use of such third party software,
prevailing over those of this Agreement.
1. Definitions.
(a) “Media” means the CD-ROM titled “Software for FinePix CX”- which
is provided to you together with this Agreement.
(b) “Software” means the software which is recorded on Media.
(c) “Documentation” means the operation manuals of Software and
other related written materials which are provided to you together
with Media.
(d) “Product” means Media (including Software) and Documentation
collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a) to install one copy of Software onto one computer in binary machine
executable form;
(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any
part of Software, Media or Documentation to any third party without
FUJIFILM’s prior written consent. You also shall not sublicense,
assign or otherwise transfer all or any part of the rights granted to
you by FUJIFILM under this Agreement without FUJIFILM’s prior
written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not
copy or reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation.
You also shall not alter or remove copyright and other proprietary
notices that appear on or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer,
decompile, or disassemble Software.
Be sure to read this page before using the software.
4. Ownership.
All copyrights and other proprietary rights to Software and Documentation are
owned and retained by FUJIFILM or the third party suppliers as indicated on
or in Software or Documentation. Nothing contained herein shall be
construed, expressly or implicitly, as transferring or granting any right, license,
or title to you other than those explicitly granted under this Agreement.
5. Limited Warranty.
FUJIFILM warrants to you that Media is free from any defect in material
and workmanship under normal use for ninety (90) days from the date
of your receipt of Media. Should Media not meet the foregoing warranty,
FUJIFILM shall replace such defective Media with other Media bearing
no defect. FUJIFILM’s entire liability and your sole and exclusive
remedy with regard to any defect in Media shall be expressly limited to
such FUJIFILM’s replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES
PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,
EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,
INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY
COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER
PROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,
OR FITNESS FOR ANY PARTICULAR PURPOSE.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY
GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,
INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE
USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
8. No export.
You acknowledge that neither Software nor any part thereof, will be
transferred, or exported to any country or used in any manner in violation
of any export control laws and regulations to which Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof, FUJIFILM
may immediately terminate this Agreement without any notice.
10. Term.
This Agreement is effective until the date when you cease to use
Software, unless earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your own
responsibility and expense, delete or destroy immediately all Software
(including its copies), Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance with
laws of Japan.
3
EC Declaration of Conformity
We
Name:
Address:
Fuji Photo Film (Europe) GmbH
Heesenstrasse 31
40549 Dusseldorf, Germany
declare that the product
Product Name:
FUJIFILM DIGITAL CAMERA FinePix F650
Manufacturer’s Name:
Fuji Photo Film Co., Ltd.
Manufacturer’s Address: 26-30, Nishiazabu 2-chome, Minato-ku,
Tokyo 106-8620, Japan
conforms to the following Standards:
Safety: EN60065
EMC: EN55022: 1998 Classe B
EN55024: 1998
EN61000-3-2: 1995 + A1: 1998 + A2: 1998
following the provision of the EMC Directive (89/336/EEC, 92/31/EEC and
93/68/EEC) and Low Voltage Directive (73/23/EEC).
Dusseldorf, Germany
June 1, 2006
Place
Date
Signature/Managing Director
This product comes with batteries. When these are empty, you shouldn’t throw them
away but deliver them as domestic chemical refuse.
4
Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this
product shall not be treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to
the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local
requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you have purchased the product.
In Countries outside the EU:
If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.
5
Contents
Warning................................................................. 2
IMPORTANT ......................................................... 3
EC Declaration of Conformity................................ 4
Disposal of Electric and Electronic Equipment
in Private Households...................................... 5
Contents................................................................ 6
Preface.................................................................. 9
About this Manual ............................................... 11
Accessories Included .......................................... 12
Camera Parts and Features................................ 13
Example of LCD Monitor Text Display ................ 14
Getting Ready
Charging the Battery ........................................... 15
Loading the Battery ............................................. 17
Loading the xD-Picture Card ......................... 19
Turning On and Off ............................................. 21
Setting the date and time ............................ 22
Correcting the Date and Time ............................. 24
Selecting the Language ...................................... 25
Using the Camera
Taking Pictures (q AUTO Mode)....................... 26
Taking pictures with the focus and
exposure locked ....................................... 30
Adjusting the shot composition ................... 32
Viewing the Images............................................. 33
Using the Erase Button ................................... 37
6
Advanced Features — Photography
Using the Photography Functions —
Procedure of Setting .....................................
Setting the Shooting Mode .................................
q AUTO ....................................................
? SCENE POSITION ..............................
s MANUAL..............................................
< APERTURE PRIORITY AE ...................
M SHUTTER PRIORITY AE ......................
e Macro/> Super macro (Close-up) ................
d Setting the Flash.............................................
j Increasing Monitor Brightness ......................
Using p-MODE MENU (Photography)/
SHOOTING MENU .......................................
Setting the p-MODE MENU......................
Setting the SHOOTING MENU ..................
p-MODE MENU (Photography) ........................
Changing the sensitivity setting
(S ISO)...................................................
Changing the quality setting
( QUALITY)..........................................
Changing the FinePix COLOR setting
( FinePix COLOR) ...............................
SHOOTING MENU.............................................
Taking pictures using self-timer
( SELF-TIMER)....................................
Adjusting exposure compensation
(S EXP. COMPENSATION) .................
Adjusting color balance
(T WHITE BALANCE) ..........................
38
40
40
40
45
45
47
50
51
53
54
54
54
56
56
57
58
59
59
60
61
Taking pictures continuously
( CONTINUOUS).................................. 62
Advanced Features — Playback
Using p-MODE MENU (Playback)/
PLAYBACK MENU ........................................ 63
Setting the p-MODE MENU (Playback) .... 63
Setting the PLAYBACK MENU ................... 63
p-MODE MENU (Playback)............................... 64
Setting automatic playback
( PLAYBACK)....................................... 64
DPOF set frame
( PRINT ORDER (DPOF)).................... 64
PLAYBACK MENU.............................................. 68
Erasing the images
( ERASE).............................................. 68
Rotating the images
( IMAGE ROTATE)............................... 69
Protecting the images
( PROTECT)......................................... 70
Copying the images
(V COPY) ............................................... 72
Adding voice memos to the images
( VOICE MEMO) .................................. 73
Trimming the images
( TRIMMING)........................................ 76
Advanced Features — Movie
r Recording Movies ......................................... 78
Changing movie size ................................. 80
w Playing Back Movies..................................... 81
Settings
U SET-UP ........................................................ 83
Using the SET-UP menu............................ 83
SET-UP menu option ................................. 84
Camera Connection
Connecting to a TV............................................. 93
Connecting Camera Directly to Printer —
PictBridge Function....................................... 94
Software Installation
Installation on a Windows PC............................. 99
Installation on a Mac OS X............................... 102
Connecting to a PC .......................................... 105
Using FinePixViewer ................................ 109
Appendices
System Expansion Option ................................
Accessories Guide ...........................................
Using Your Camera Correctly ..........................
Power Supply and Battery................................
Notes on the xD-Picture Card™ and
the Internal Memory ....................................
Warning Displays .............................................
111
112
114
115
119
121
Continued Q
7
Contents
Troubleshooting
Troubleshooting ................................................ 125
Specifications .................................................
Explanation of Terms .....................................
FUJIFILM Digital Camera Worldwide
Network ....................................................
Safety Notes ..................................................
8
132
136
137
144
Preface
Z Test Shots Prior to Photography
For important photographs (such as weddings and
overseas trips), always take a test shot and view the
image to make sure that the camera is working normally.
• Fuji Photo Film Co., Ltd. cannot accept liability for any
incidental losses (such as the costs of photography or
the loss of income from photography) incurred as a
result of faults with this product.
Z Notes on Copyright
Images recorded using your digital camera system cannot
be used in ways that infringe copyright laws without the
consent of the owner, unless intended only for personal
use. Note that some restrictions apply to the
photographing of stage performances, entertainments
and exhibits, even when intended purely for personal use.
Users are also asked to note that the transfer of
xD-Picture Card containing images or data protected
under copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Z Handling Your Digital Camera
This camera contains precision electronic components.
To ensure that images are recorded correctly, do not
subject the camera to impact or shock while an image is
being recorded.
Z Liquid Crystal
If the LCD monitor is damaged, take particular care with
the liquid crystal in the monitor. If any of the following
situations arise, take the urgent action indicated.
• If liquid crystal comes in contact with your skin
Wipe the area with a cloth and then wash thoroughly
with soap and running water.
• If liquid crystal gets into your eye
Flush the affected eye with clean water for at least 15
minutes and then seek medical assistance.
• If liquid crystal is swallowed
Flush your mouth thoroughly with water. Drink large
quantities of water and induce vomiting. Then seek
medical assistance.
Z Trademark Information
•
and xD-Picture Card™ are trademarks of Fuji
Photo Film Co., Ltd.
• IBM PC/AT is a registered trademark of International
Business Machines Corp. of the U.S.A.
• Macintosh, Power Macintosh, iMac, PowerBook, iBook
and Mac OS are trademarks of Apple Computer, Inc.,
registered in the U.S. and other countries.
• Microsoft, Windows, and the Windows logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Windows is an abbreviated term referring to the
Microsoft® Windows® Operating System.
* The “Designed for Microsoft® Windows® XP” logo refers
to the camera and the driver only.
• Other company or product names are trademarks or
registered trademarks of the respective companies.
Continued Q
9
Preface
Z Notes on Electrical Interference
If the camera is to be used in hospitals or aircrafts, please
note that this camera may cause interference to other
equipment in the hospital or aircraft. For details, please
check with the applicable regulations.
Z Explanation of Color Television System
NTSC:
PAL:
National Television System Committee, color
television telecasting specifications adopted
mainly in the U.S.A., Canada and Japan.
Phase Alternation by Line, a color television
system adopted mainly by European countries
and China.
Z Exif Print (Exif ver. 2.2)
Exif Print Format is a newly revised digital camera file
format that contains a variety of shooting information for
optimal printing.
* See “Using Your Camera Correctly” (➝p.114) for more
information.
10
About this Manual
e Macro/> Super macro (Close-up)
Use this mode to take close-up shots.
Available Photography modes: q, ? (
<, M ( p.40)
only), s,
The macro setting changes each time you press e (p).
W
T
MENU
/OK
DISP/BACK
AUTO
N 25
The last displayed setting is
the selected mode.
e: Macro
>: Super macro
Icons indicate the modes that are available.
CHECK
Focal range (e: Macro)
Approx. 12 cm to 80 cm (4.7 in. to 2.6 ft.)
Focal length (35mm camera equivalent) : approx.
35mm to 78 mm, max. zoom scale : approx. 2.2×
Effective flash range (e: Macro)
Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)
Focal range (>: Super macro)
Approx. 3 cm to 20 cm (1.2 in. to 7.9 in.) (Wide-angle
only)
When setting > Super macro mode, the camera sets to
C Suppressed flash mode automatically and the flash
cannot be used.
MEMO
Use a tripod to prevent camera shake in Macro mode.
Any of the following cancels Macro mode:
- Changing the Shooting mode setting
- Turning the camera off
CAUTION
If the focal length is more than 78 mm (35 mm camera
equivalent) before setting e Macro mode, the focal
length moves to 78 mm automatically.
When setting > Super macro mode, the focal length
CAUTION
This mark denotes issues that may affect the
camera’s operation.
CHECK
This mark denotes points to notice in the
camera’s operation.
MEMO
This mark denotes additional topics that
complement the basic operating procedures.
Z 4-direction (nopq) button
Up, down, left, and right are indicated by black triangles in the Owner’s Manual. Up or down is shown as n or o, and left or
right is shown as p or q.
When pressing q:
When pressing DISP/BACK:
11
Accessories Included
• Rechargeable Battery NP-40N (1)
Soft case included
NP
-4
0N
• CD-ROM (1)
Software for FinePix CX
• Strap (1)
• Owner’s Manual (this manual) (1)
• Battery Charger BC-40 (1)
Attaching the strap
Attach the strap as shown in 1 and 2.
1
2
W
W
T
T
DIS
P/B
ACK
• A/V cable for FinePix F650 (1)
Including plug to pin-plug ×2
• USB cable for FinePix F650 (1)
12
DIS
P/B
ACK
Camera Parts and Features
• Refer to the pages in parentheses for information on using the camera parts or features.
W
MENU
/OK
DISP/BAC
K
T
A Shutter button
B Mode dial
C Self-timer lamp (p.59)
D Flash (p.51)
E Lens (lens cover)
F POWER button
G Speaker
H Microphone
I Indicator lamp (p.29)
J MENU/OK button
K 4-direction (nopq) button
L LCD monitor
M Tripod mount
N Battery cover (p.17)
O W (Wide zoom) button (p.27, 34)
P T (Tele zoom) button (p.27, 34)
Q w (Playback) button
R Photo mode (p) button (p.54, 63)
S DISP (Display)/BACK button (p.32, 33)
T Terminal cover
U DC IN 5V socket
V A/V OUT (Audio/Visual output) socket (p.93)
W USB socket
X Strap mount
Y Battery release catch (p.17)
Z Battery compartment (p.17)
! xD-Picture Card slot (p.19)
13
Example of LCD Monitor Text Display
Z Photography mode
N 25
ISO 100
AF
UP
1/ 11/ 2006 12:
12 00 AM
1000 F2.8
1 23
A 9 White balance (p.61)
B ( Self-timer (p.59)
C C Flash (p.51)
D s Photography mode (p.40)
E
Battery level indicator
(p.18)
F e Macro (close-up) (p.50)
G AF frame (p.27)
H Date/Time (p.22)
I Shutter speed (p.47)
J Aperture (p.45)
K f Continuous shooting
(p.62)
L 5N Quality mode (p.57)
M Number of available frames
(p.135)
N
FinePix COLOR (p.58)
O { AF warning (p.27)
P | Camera shake warning
(p.28)
Q
Increasing monitor
brightness (p.53)
R Y Internal memory (p.20)
S ISO 100 Sensitivity (p.56)
T S Exposure compensation
(p.60)
Z Playback mode
100-0001
N
ISO 100
A w Playback mode (p.33)
B u DPOF (p.64)
C F Protection (p.70)
D Frame number (p.87)
E # Voice memo (p.73)
1/ 11/ 2006 12:
12 00 AM
1 23
1000 F2.8
FinePix F650 has internal memory that can store images without xD-Picture Card. Y appears on the LCD monitor when the
internal memory is active.
14
Charging the Battery
NP
-4
0N
Z Compatible battery
Rechargeable Battery NP-40N (1)
Terminals
Indicator
CAUTION
• Always use the Rechargeable Battery NP-40N
(included). The use of other brands of rechargeable
battery could cause faults or damage to the camera.
• NP-40N (included) that is supplied with the camera is a
battery only for FinePix F650/F470/F460. Do not load
the battery into another FUJIFILM digital camera.
Please specify the FUJIFILM NP-40 Rechargeable
Battery (sold separately) when you purchase a spare
battery (➝p.112).
• The battery (included) is not fully charged at shipment
and must be fully charged before being used.
• The battery cannot be charged even when connecting
the camera directly to the AC power adapter.
• If the terminals of battery are soiled, it may not be
possible to charge it. Clean the battery terminals and
battery charger terminals with a clean, dry cloth.
• Charging times increase at low temperatures.
• The NP-40N gradually loses its charge even when not
used. Charge a NP-40N just before taking pictures (in
the last day or two).
• Do not stick labels onto the battery as this could cause
the battery to become jammed inside the camera.
• When removed from the camera, the battery should be
stored and transported in the case provided. Any
contact between the battery terminals could cause the
battery to short-circuit and overheat.
• See p.115-116 for information on the battery.
Getting Ready
The battery is not fully charged at shipment and must be
fully charged before being used.
Continued Q
15
Charging the Battery
1
Plug the Battery Charger BC-40 (included)
into the power outlet using the connection
cord.
2
Load the battery into the Battery Charger
BC-40 correctly as indicated by the polarity
icon to start charging.
Charging lamp
N
P
-4
0N
[During charging]
Lit red
[Charging completed]
Off
MEMO
Charging ends after about 90 minutes.
CAUTION
Unplug the battery charger from the power outlet when it
is not in use.
16
Loading the Battery
Battery is required to operate the digital camera. At first,
load the battery in the camera.
2
1
Hold the battery so that the indicators are aligned. Push
the battery release catch aside while loading the battery.
Check that the battery is firmly held in place.
Battery release catch
Getting Ready
Open the battery cover.
Load the battery.
W
T
DISP/B
ACK
DISP
/BAC
EN
OP
K
Indicators
DISP/B
ACK
CHECK
Check that the camera is turned off before opening the
battery cover.
CAUTION
• Do not open the battery cover while the camera is on.
This could damage the xD-Picture Card or ruin the
image files on the xD-Picture Card.
• Do not apply force to the battery cover.
CAUTION
Load the battery in the correct direction.
Continued Q
17
Loading the Battery
3
Close the battery cover.
Checking the battery charge
Turn the camera on and check the battery level indicator
on the LCD monitor.
OP
EN
A There is ample battery charge. (Lit white)
B The battery is almost half charged. (Lit white)
C There is insufficient charge left in the battery. The
battery will soon run out. Have a charged battery
ready. (Lit red)
D The battery is depleted. The display will shortly go
blank and the camera will stop working. Replace or
recharge the battery. (Blinking red)
CAUTION
• Due to the nature of the battery, the battery level
indicator (
,
, or V) may appear early
when the camera is used in cold locations. Try warming
the battery in your pocket or a similar location before
use.
• Battery with no remaining charge (V blinking red)
may cause camera faults such as the camera turning
itself off without retracting the lens. Always load a fully
charged battery.
• Depending on the camera mode, the transition from
to V may occur more quickly.
18
Loading the xD-Picture Card
Close the battery cover.
OP
EN
1
3
Getting Ready
Although you can store pictures in the camera’s internal
memory, you can store many more images on the xDPicture Card (sold separately). There is a slot for the xDPicture Card inside the battery compartment.
Open the battery cover.
OP
EN
How to replace the xD-Picture Card
2
Insert an xD-Picture Card.
Gold marking
W
T
Push the xD-Picture Card into the slot and then slowly
remove your finger. The lock is released and the xD-Picture
Card is pushed out.
DISP/BACK
Gold contact area
Continued Q
Align the gold marking with
the gold contact area.
19
Loading the xD-Picture Card
CAUTION
• When storing xD-Picture Cards, make sure that they
are kept out of the reach of children. An xD-Picture
Card could be swallowed and cause suffocation. If a
child swallows an xD-Picture Card, seek medical
attention or call emergency number right away.
• If the xD-Picture Card is oriented incorrectly, it will not
go all the way into the slot. Do not apply force when
inserting an xD-Picture Card.
• Note that the xD-Picture Card may spring out if you
release your finger quickly from the card immediately
after the lock is released.
• Operation of this camera is only guaranteed when it is
used with FUJIFILM xD-Picture Card.
• See p.119 for information on the xD-Picture Card.
MEMO
• The size of an image file varies depending on the
subject. For this reason, the number recorded may not
represent the actual number of frames.
• See p.135 for information on the standard number of
available frames.
Z About internal memory
AUTO
N 25
FinePix F650 has internal
memory that can store
images without xD-Picture
Card. Y appears on the
LCD monitor when internal
memory is active.
When an xD-Picture Card (sold separately) is
inserted
[Record images]: Record images to an xD-Picture
Card.
[Playback images]: Playback images in an xD-Picture
Card.
When an xD-Picture Card (sold separately) is not
inserted
[Record images]: Record images to internal memory.
[Playback images]: Playback images in internal memory.
Z About images in the internal memory
Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
MO disk, CD-R, CD-RW, hard disk, etc.).
It is possible to transfer saved images on the internal
memory to an xD-Picture Card (➝p.72).
20
Turning On and Off
Press POWER down fully to turn the camera on.
Press POWER again to turn the camera off.
Turning the camera on in
Playback mode
Press w for about 1 second to turn the camera on in
Playback mode.
Press POWER to turn the camera off.
W
Getting Ready
Turning the camera on in
Photography mode
T
MENU
/OK
DISP/BACK
MEMO
Changes between Photography mode and
Playback mode
Press w during shooting to change to Playback mode.
Press the shutter button down halfway to return to
Photography mode.
MEMO
To change to Photography mode, press the shutter button
down halfway.
Continued Q
CAUTION
• The lens moves and the lens cover opens when turning
the camera on in Photography mode. Take care not to
obstruct the lens.
• Take care not to get fingerprints on the camera lens as
this will result in impaired image quality in your shots.
21
Turning On and Off
Setting the date and time
2
Set the date and time.
When using the camera for the first time after purchasing,
the date and time are cleared. Set the date and time.
DATE/TIME
2008
2007
1
“DATE/TIME NOT SET” message appears
when turning the camera on.
YY .MM .DD
2006
1. 1
2005
2004
SET
12:00
AM
CANCEL
DATE/TIME NOT SET
A Press p or q to select Year, Month,
Day, Hour, or Minute.
SET
NO
Press MENU/OK to set the date and time.
B Press n or o to correct the setting.
MEMO
• Holding down n or o changes the numbers
continuously.
• When the time displayed passes “12”, the AM/PM
setting changes.
22
MEMO
Change the date format.
DATE/TIME
DD. MM. YY
MM/DDDD/YYYY
MM
5/24/2006
YY. MM. DD
SET
10:00
AM
CANCEL
A Press p or q to select the date format.
“DATE/TIME NOT SET” message also appears when the
battery has been removed and the camera has been left
for a long period. Once the AC power adapter has been
connected or the battery has been installed for 10 hours
or more, the camera settings will be retained for roughly
24 hours even if both sources of power are removed.
Getting Ready
3
Auto power off function
When the Auto power off function is active, if the camera
is left unused for 2 or 5 minutes, this function turns the
camera off (➝p.91). To turn the camera back on, press
POWER. To play back images, hold down w for about 1
second.
B Press n or o to set the format.
C Always press MENU/OK after the settings
are completed.
Date format
ex. May 24, 2006
YY.MM.DD: 2006.5.24
MM/DD/YY: 5/24/2006
DD.MM.YY: 24.5.2006
23
Correcting the Date and Time
1
2
Open the SET-UP menu.
SET-UP
SET
UP
SHOOTING MENU
SELF TIMER
SELF-TIMER
CONTINUOUS
SET-UP
SET
UP
Display the DATE/TIME screen.
OFF
OFF
DATE/TIME
DATE
TIME
BEEP VOLUME
SHUTTER VOLUME
PLAYBACK VOLUME
LCD BRIGHTNESS
FORMAT
A Press MENU/OK to open the menu.
A Press p or q to select
B Press n or o to select U SET-UP.
B Press o to move to menu item.
C Press q.
C Press n or o to select
.
DATE/TIME.
D Press q.
See “2 Set the date and time. ” (➝p.22).
24
Selecting the Language
Open the SET-UP menu.
A Press p or q to select
.
SHOOTING MENU
SELF-TIMER
SELF
TIMER
CONTINUOUS
SET UP
SET-UP
B Press o to move to select
OFF
OFF
.
Getting Ready
1
C Press q.
3
Select the language.
A Press MENU/OK to open the menu.
ENGLISH FRANCAIS DEUTSCH
ESPA OL ITALIANO
ESPAÑOL
B Press n or o to select U SET-UP.
SET
CANCEL
C Press q.
2
Display the
screen.
A Press n, o, p, or q to select the
language.
SET-UP
SET
UP
AUTO POWER OFF
TIME DIFFERENCE
USB MODE
VIDEO SYSTEM
RESET
ENGLISH
2 MIN
B Press MENU/OK to confirm the setting.
NTSC
25
Taking Pictures (q AUTO Mode)
This section describes the basic operations.
Holding the camera correctly
1
Brace your elbows
against your sides and
hold the camera with both
hands.
Turn the camera on.
A Press POWER to turn the camera on.
Do not cover the lens
or flash with your fingers.
CAUTION
B Set the Mode dial to q.
26
• Moving the camera while shooting gives a blurred
picture (camera shake). Hold the camera steadily with
both hands.
• If the lens or flash is obscured by your fingers or the
strap, subjects may be out of focus or the brightness
(exposure) of your shot may be incorrect.
2
Check the composition on the LCD monitor.
To adjust zoom scale using the Zoom button:
AUTO
T button
(Zoom in)
N 25
AUTO
Focus on the main subject in the AF frame
and press the shutter button down halfway.
AUTO
N 25
N 25
250
AF frame
Halfway
pressed
Zoom bar
• Focal range
Approx. 60 cm (2.0 ft.)
to infinity
• Optical zoom focal
length (35 mm
camera equivalent)
Approx. 35 mm to
175 mm
• Max. zoom scale
5×
MEMO
• Select e Macro mode to take close-up shots (➝p.50).
• Use digital zoom when you want to shoot the subject
closer (➝p.88).
F5.6
Using the Camera
W button
(Zoom out)
3
AF frame
becomes smaller
and camera
focuses on the
subject.
CHECK
• Focus on the subject
Double beep is heard
Indicator lamp lit green
• Not focus on the subject
No sound
{ indicated
Indicator lamp blinking green
MEMO
• The shutter button has a halfway point at which focus
and exposure are automatically optimized before taking
the picture by pressing fully down.
Continued Q
27
Taking Pictures (q AUTO Mode)
4
Press the shutter button fully.
Double
beep
Flash
Click
When pressing the shutter
button down halfway, b
appears on the LCD monitor
before the flash fires.
250
Halfway pressed
Fully pressed
F5.6
Change the flash mode when you want to take pictures without
flash. See p.51 for information on flash.
CAUTION
When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
MEMO
• When the subject is not in the AF frame, use AF/AE lock
to take the picture (➝p.30).
• When pressing the shutter button down fully in one
motion, the camera takes the picture without the AF
frame changing.
28
CAUTION
• The image shown on the LCD monitor before the
picture is taken may differ in brightness, color, etc. from
the image actually recorded. Play back the recorded
image to check it (➝p.33).
• When selecting a slow shutter speed that will cause
camera shake, | appears on the LCD monitor. Use
flash or a tripod.
• See p.121-124 for information on warning displays. See
“Troubleshooting” (➝p.125-131) for more information.
Z Indicator lamp display
The indicator lamp lights or blinks when pressing the
shutter button, etc. The indicator lamp shows the camera
status.
Display
Status
Locking the focus
Blinking green
Camera shake warning, AF warning,
or AE warning (ready to shoot)
Blinking green and
orange alternately
Recording to xD-Picture Card or
internal memory (ready to shoot)
Lit orange
Recording to xD-Picture Card or
internal memory (not ready)
Indicator lamp
Blinking orange
Charging flash (flash will not fire)
Blinking red
• Warnings for xD-Picture Card and
internal memory
Card not formatted, incorrect format,
memory full, xD-Picture Card or
internal memory error
• Lens operation error
Using the Camera
Lit green
MEMO
Detailed warning messages appear on the LCD monitor
(➝p.121-124).
29
Taking Pictures (q AUTO Mode)
Taking pictures with the focus
and exposure locked
Using AF/AE lock
1
AUTO
N 25
Move the camera slightly so that one of the
subjects is in the AF frame.
AUTO
In the above composition, the subjects (two people in this
case) are not in the AF frame. Pressing the shutter button
halfway at this point will result in the subjects being out of
focus.
AF/AE lock is useful:
2
N 25
Press the shutter button down halfway to
focus on the subject.
Use AF/AE lock to guarantee best result when shooting a
subject that is not suited to autofocusing (➝p.31).
Double
beep
250
Halfway
pressed
30
F5.6
3
Subjects not suitable for autofocus
FinePix F650 uses a high-precision autofocusing mechanism.
However, it may have difficulty focusing on the following:
Using the Camera
Continue to hold the shutter button down
halfway. Move the camera back to the
original image and press the shutter button
fully.
Click
250
F5.6
Very shiny subjects such
as a mirror or car body
Fully pressed
MEMO
• AF/AE lock can be applied repeatedly before the shutter
is released.
• Use AF/AE lock in all Photography modes to guarantee
excellent results.
• On FinePix F650, pressing the shutter button down
halfway locks the focus and exposure settings (AF and
AE lock).
Fast moving subjects
•
•
•
•
•
Subjects photographed through glass
Subjects that do not reflect well, such as hair or fur
Subjects with no substance, such as smoke or flames
Dark subjects
Subjects with little or no contrast between the subject and
the background (such as subjects dressed in the same color
as the background)
• Shots where another high-contrast object (not the subject) is
close to the AF frame and is either closer or further away
than your subject (such as a shot of someone against a
background with strongly contrasting elements)
For such subjects use AF/AE lock (➝p.30).
31
Taking Pictures (q AUTO Mode)
Adjusting the shot composition
Select the LCD monitor display.
Press DISP/BACK to change the LCD monitor display.
W
T
MENU
/OK
DISP/BACK
AUTO
N 25
Text displayed
AUTO
No text displayed
N 25
Framing guideline
displayed
32
Best framing
Position the main subject at
the intersection of two lines
in this frame or align one of
the horizontal lines with the
horizon. Use this frame as a
guide to the subject’s size
and the balance of the shot
while composing a shot.
AUTO
N 25
Viewing the Images
Playback your images to check them. For important
photographs, always take a test shot and view the image
to make sure that the camera is working normally.
Select the LCD monitor display.
Press DISP/BACK during Playback mode to change the
LCD monitor display.
W
MENU
/OK
DISP/BACK
Press w during shooting to change to Playback mode.
W
T
Using the Camera
Setting the camera to Playback
mode
T
MENU
/OK
100-0001
N
ISO 100
DISP/BACK
When the camera is off, press w for about 1 second to
turn the camera on in Playback mode.
55/ 24
24/ 2006 12
12: 00 AM
1000 F2.8
Text displayed
MEMO
When pressing w, the last image shot appears on the
LCD monitor.
CAUTION Still images viewable on FinePix F650
This camera will display still images recorded on FinePix
F650 or still images (excluding some uncompressed
images) recorded on any FUJIFILM digital camera that
supports xD-Picture Cards. Clear playback or playback
zooming may not be possible for still images shot on
cameras other than FinePix F650.
No text displayed
2006
5/22
5 22
5/23
23
5/24
5 24
1/14
14
Sorting by date
Multi-frame playback
33
Viewing the Images
Single-frame playback
100-0001
N
ISO 100
Playback zoom
1
Zoom in / Zoom out.
To zoom in an image during single-frame playback:
W button (Zoom out)
T button (Zoom in)
55/ 24
24/ 2006 10
10: 00 AM
1000 F2.8
To select the required image:
Press p: last image
Press q: next image
Zoom bar
Selecting images
To select images on the
thumbnail lists screen, hold
down p or q for 1 second
during playback.
When releasing p or q,
camera returns to singleframe playback.
Press W or T to zoom in or out on an
image.
Press DISP/BACK to cancel playback zoom.
2
Display another part of the image.
Navigation screen
(Current displayed
image)
Press n, o, p, or q to display another
part of the image.
34
Z Zoom scales
Quality mode
5 (2816 × 2112 pixels)
Multi-frame playback
Max. zoom scale
Approx. 4.4×
Approx. 4.4×
3 (2048 × 1536 pixels)
Approx. 3.2×
2 (1600 × 1200 pixels)
Approx. 2.5×
Using the Camera
% (2816 × 1880 pixels)
Multi-frame playback screen (30 frames) appears on the
LCD monitor. Select required frame from the 30 frames.
A Press n, o, p, or q to move the cursor
(colored frame) to the selecting frame.
Press n or o repeatedly to jump to the
next page.
B Press MENU/OK to enlarge the image.
35
Viewing the Images
Sorting by date
In sorting by date mode, you can view all images taken on
the same day.
2006
55/22
22
5/23
23
5/24
5 24
Selecting the date
2006
5/22
22
5/23
23
5/24
24
14
1/14
14
A Press n, o, p, or q to move the cursor
(colored frame) to the selecting frame.
A Press n, o, p, or q to move the cursor
(colored frame) to
on the upper left
frame.
B Press p to display the selecting date.
B Press MENU/OK to enlarge the image.
C Press n or o to move the cursor (colored
frame) to select the date.
Press n or o repeatedly to jump to the
next page.
D Press q.
36
Using the Erase Button
Use this mode to erase unnecessary images to have
ample free space on the xD-Picture Card or internal
memory.
3
Erase the image.
ERASE OK?
Set the camera to Playback mode.
Press w to turn the camera on in Playback mode.
W
OK
CANCEL
T
SET
MENU
/OK
Using the Camera
1
DISP/BACK
A Press n ( ).
2
Select the image.
B Press p or q to select OK.
100-0001
N
ISO 100
C Press MENU/OK to erase the displayed
image.
CAUTION
55/ 24
24/ 2006 10
10: 00 AM
1000 F2.8
Erased images cannot be recovered.
Press p or q to select the erasing frame
(file).
37
Using the Photography Functions — Procedure of Setting
Specify the camera settings for taking pictures to get the
best result. A general guide is given below.
1
Select the Photography mode.
2
Specify the photography settings.
Pressing buttons or selecting menu allows you to
specify photography functions. You can obtain the
best result for shooting.
Turn the Mode dial to select the Photography mode.
The camera settings are tailored to the scene being
shot.
W
T
MENU
/OK
DISP/BACK
q Auto
This is the easiest mode for taking
pictures (➝p.40).
? Scene
position
Select the best Shooting mode for the
scene being shot (➝p.40).
s Manual
This mode provides more detailed
settings that are impossible to set in q
Auto mode (➝ p.45).
<
M
38
Aperture
priority AE
Used for changing the aperture setting so
that the background is out of focus, or the
area in front of and behind the subject is
also in focus in the shot (➝p.45).
Shutter
priority AE
Used for changing the shutter speed
setting so that the action is frozen or the
flow of the motion is conveyed (➝p.47).
e (p) Macro button
d (q) Flash button
(o) Shutter speed/Aperture
button
Z Specifying functions using buttons
e Macro
Used for close-up shots (➝p.50).
d Flash
Used for shots in dark locations or for
backlit subjects, etc. (➝p.51).
Shutter
speed/
Aperture
Used for changing the aperture or shutter
speed (➝p.46, 48).
Z Specifying functions using p-MODE MENU (p
button)
Use to specify required sensitivity
setting (➝p.56).
S ISO
Use to specify required image size
(➝p.57).
FinePix COLOR
Use to specify required color tone
(➝p.58).
W
Used in situations such as group
shots where the photographer is
included in the shot (➝p.59).
SELF-TIMER
S EXP.
Used for changing the image
COMPENSATION brightness (➝p.60).
T WHITE BALANCE Use to adjust the color tone (➝p.61).
Use to take pictures continuously
(➝p.62).
CONTINUOUS
T
MENU
/OK
W
T
DISP/BACK
MENU
/OK
DISP/BACK
MODE MENU
ISO
QUALITY
COLOR
AUTO
N
STD
Advanced Features — Photography
QUALITY
Z Specifying functions using SHOOTING MENU
(MENU/OK button)
SHOOTING MENU
SELF-TIMER
SELF
TIMER
EXP.COMPENSATION
EXP
COMPENSATION
WHITE BALANCE
CONTINUOUS
SET-UP
SET
UP
OFF
AUTO
OFF
39
Setting the Shooting Mode
You can select the most suitable setting according to the
subject by selecting one of the Shooting modes.
q AUTO
This is the easiest mode for providing crisp and clear
shots.
Use this mode for ordinary photography.
? SCENE POSITION
This mode provides the best Scene position setting for the
scene being shot. Choose from 12 types of scene.
Select the Scene position setting in the SCENE
POSITION menu.
Set the Mode dial to ?.
Camera specifies all settings other than p-MODE
(Quality and FinePix COLOR) automatically.
Set the Mode dial to q.
MEMO
• See p.52 for information on the available flash modes.
•
p-CHROME (p.58) cannot be set.
CHECK
Available flash modes:
AUTO, b, d, C
40
Z Selecting Scene position setting
H PORTRAIT
Use this mode for
photography to get
beautiful skin tones and
soft overall tone.
SHOOTING MENU
SCENE POS
SELF TIMER
SELF-TIMER
CONTINUOUS
SET-UP
SET
UP
A Press MENU/OK to open the menu.
, LANDSCAPE
B Press n or o to select
POSITION.
Use this mode for shooting
scenery in daylight and
provides crisp, clear shots of
scenery such as buildings
and mountains.
SCENE
C Press q.
Advanced Features — Photography
PORTRAIT
LANDSCAPE
SPORT
NIGHT
FIREWORKS
SUNSET
CHECK
Flash cannot be used in
the Landscape mode.
D Press n or o to select the setting.
Continued Q
E Press MENU/OK button to confirm the
setting.
41
Setting the Shooting Mode
. SPORT
Use this mode to take
pictures of a moving subject.
It gives priority to faster
shutter speeds.
FIREWORKS
Use this mode to shoot
fireworks.
It is effective for taking
more vivid shots of
fireworks with a slow
shutter of 2 seconds.
CHECK
8 NIGHT
Use this mode for shooting
evening and night scenes.
A picture is taken with a slow
shutter of up to 2 seconds.
CHECK
Use a tripod to prevent camera shake, because a picture
is taken with a slow shutter.
CAUTION
For slow shutter speeds of 1/2 sec. or longer, recording
takes longer because noise reduction processing is
performed after you take the shot.
[PROCESSING...] appears on the LCD monitor during
noise reduction.
42
• Flash cannot be used in the Fireworks mode.
• Use a tripod to prevent camera shake in the Fireworks
mode.
CAUTION
For slow shutter speeds of 1/2 sec. or longer, recording
takes longer because noise reduction processing is
performed after you take the shot.
[PROCESSING...] appears on the LCD monitor during
noise reduction.
SUNSET
Use this mode to shoot
sunset, making the colors
more vivid.
SNOW
BEACH
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at beach
under strong sunlight.
MUSEUM
Use this mode for taking
pictures in places such as
museum where the use of
flash and making an
operation sound and a
shutter sound are
restricted.
Flash mode is forcibly set
to Suppressed flash and
operation sound and shutter sound are not emitted.
MEMO
Check whether photography is permitted before using this
mode.
PARTY
Advanced Features — Photography
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at snowy
scene where the whole
screen appears white.
Use this mode for shooting
at indoor wedding and
party.
This mode produces
beautiful images that retain
the natural ambience when
shots are taken in low-light
conditions.
Continued Q
43
Setting the Shooting Mode
FLOWER
Use this mode to take
clear close-up shots when
zooming up a flower.
It is effective for taking
more vivid shots of flower
petal.
TEXT
Use this mode to shoot
documents and white
board.
It is effective for taking
clearer shots of letters.
CHECK
CHECK
• Flash cannot be used in the Flower mode.
• Focal range
Approx. 12 cm (4.7 in.) to infinity
• Focal length and maximum zoom scale are limited to
approx. 35 mm to 78 mm (35 mm camera equivalent)
and approx. 2.2× respectively.
• Focal range
Approx. 12 cm (4.7 in.) to infinity
• Focal length and maximum zoom scale are limited to
approx. 35 mm to 78 mm (35 mm camera equivalent)
and approx. 2.2× respectively.
CAUTION
CAUTION
If the focal length is more than 78 mm (35 mm camera
equivalent) before setting this mode, the focal length
moves to 78 mm automatically.
44
If the focal length is more than 78 mm (35 mm camera
equivalent) before setting this mode, the focal length
moves to 78 mm automatically.
s MANUAL
This is an automatic mode to specify the settings except
for the shutter speed and aperture setting.
Set the Photography functions to manual to easily control
yourself.
< APERTURE PRIORITY AE
This is an automatic mode to set the aperture.
Use this mode to have the area in front of and behind the
subject out of focus (large aperture) or have both near
and far subjects in focus (small aperture).
Set the Mode dial to s.
Photography functions:
• S EXP. COMPENSATION (➝p.60)
• T WHITE BALANCE (➝p.61)
CHECK
CHECK
Available flash modes:
AUTO, b, d, C, c, n
Available flash modes:
b, d, C, c, n
Advanced Features — Photography
Photography functions:
• S EXP. COMPENSATION (➝p.60)
• T WHITE BALANCE (➝p.61)
Set the Mode dial to <.
Continued Q
45
Setting the Shooting Mode
CAUTION
N 25
ISO 100
N 25
ISO 100
4
SETTING APERTURE
250 F5.6
4
SELECT
F8
SET
Lit red
A Press o to select SETTING APERTURE.
N 25
ISO 100
B Press p or q to select the aperture.
C Press the shutter button to take pictures.
CHECK
Aperture settings
Wide-angle: F2.8 to F8 in 1/3 EV increments
Telephoto: F4.7 to F7.6 in 1/3 EV increments
MEMO
To change the macro or flash setting, press o to cancel
the aperture setting.
46
When the correct exposure
cannot be obtained with
selected aperture setting, the
shutter speed appears in red.
When this occurs, adjust the
aperture setting again.
----
SELECT
F5.6
SET
When the brightness of the
subject is outside the camera’s
brightness metering range,
“---” appears as the shutter
speed. When this occurs,
press the shutter button down
halfway to measure the light
level again.
M SHUTTER PRIORITY AE
Aperture
By adjusting the aperture, you can change the depth of focus
(depth of field). Selecting a larger number of aperture (closed)
obtains a larger depth of focus. Selecting a smaller number of
aperture (open) has the area in front of and behind the subject
out of focus.
Set the Mode dial to M.
The area in front of and
behind the subject is also in
focus in the shot.
Photography functions:
• S EXP. COMPENSATION (➝p.60)
• T WHITE BALANCE (➝p.61)
Main subject
CHECK
Open
The area in front of and
behind the subject is out of
focus.
Available flash modes:
b, d, C
Advanced Features — Photography
Closed
This is an automatic mode to set the shutter speed. Use
this mode to freeze a moving subject (fast shutter speed)
or convey the impression of movement (slow shutter
speed).
Continued Q
47
Setting the Shooting Mode
CAUTION
N 25
ISO 100
N 25
ISO 100
F2.8
SETTING SHUTTER SPEED
250 F5.6
1000
SELECT
F2.8
SET
Lit red
A Press o to select SETTING SHUTTER
SPEED.
N 25
ISO 100
B Press p or q to select the shutter speed.
C Press the shutter button to take pictures.
CHECK
Shutter speed setting
2 sec. to 1/1000 sec. in 1/3 EV increments
MEMO
To change the macro or flash setting, press o to cancel
the shutter speed setting.
48
When the correct
exposure cannot be
obtained with selected
shutter speed, the
aperture setting appears
in red. When this occurs,
adjust the shutter speed
again.
50
SELECT
F ---
SET
When the brightness of
the subject is outside the
camera’s brightness
metering range, “F---”
appears as the aperture
setting. When this
occurs, press the shutter
button down halfway to
measure the light level
again.
• For slow shutter speeds of 1/2 sec. or longer, recording
takes longer because noise reduction processing is
performed after you take the shot.
[PROCESSING...] appears on the LCD monitor during
noise reduction.
Shutter speed
When shooting a moving subject, you can either “freeze the
motion” or “capture the sense of movement” by adjusting the
shutter speed.
Freezes the motion of the
subject.
Slow
Photographs the traces left
by the subject’s movement.
Advanced Features — Photography
Fast
49
e Macro/> Super macro (Close-up)
Use this mode to take close-up shots.
Available Photography modes: q, ? (
<, M (➝p.40)
CHECK
only), s,
The macro setting changes each time you press e (p).
W
T
MENU
/OK
DISP/BACK
AUTO
N 25
The last displayed setting is
the selected mode.
e: Macro
>: Super macro
• Focal range (e: Macro)
Approx. 12 cm to 80 cm (4.7 in. to 2.6 ft.)
Focal length (35mm camera equivalent) : approx.
35mm to 78 mm, max. zoom scale : approx. 2.2×
• Effective flash range (e: Macro)
Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)
• Focal range (>: Super macro)
Approx. 3 cm to 20 cm (1.2 in. to 7.9 in.) (Wide-angle
only)
• When setting > Super macro mode, the camera sets to
C Suppressed flash mode automatically and the flash
cannot be used.
MEMO
• Use a tripod to prevent camera shake in Macro mode.
• Any of the following cancels Macro mode:
- Changing the Shooting mode setting
- Turning the camera off
CAUTION
• If the focal length is more than 78 mm (35 mm camera
equivalent) before setting e Macro mode, the focal
length moves to 78 mm automatically.
• When setting > Super macro mode, the focal length
changes to wide-angle (W) automatically.
50
d Setting the Flash
Flash photography is useful for taking pictures at night or
indoor dark locations. Choose from 6 flash modes
according to the type of shot. See p.52 for information on
the available Photography modes.
W
MEMO Red-eye effect
When using the flash to take a picture of people in lowlight conditions, their eyes sometimes appear red in the
picture. This is caused by the light of the flash reflecting
off the inside of the eye.
d FORCED FLASH
T
MENU
/OK
DISP/BACK
The flash setting changes
each time you press d
(q).
MEMO
When pressing the shutter button down halfway, b
appears on the LCD monitor before the flash fires.
AUTO Auto flash (not displayed)
Use this mode for ordinary photography.
The flash fires as required by the shooting conditions.
b RED EYE REDUCTION
This mode is suitable for shooting portraits
in low-light conditions.
Use this mode to minimize red-eye (eyes
appear in red in the finished photo).
C SUPPRESSED FLASH
This mode is suitable for situations where the flash cannot
be used.
Use a tripod to prevent camera shake when shooting in
Suppressed flash mode in the dark condition.
Any time, flash does not fire.
Advanced Features — Photography
Use this mode in backlit scenes, or to get the correct
colors when taking a picture under bright lighting.
In this mode, the flash fires in bright as well as dark
conditions.
c SLOW SYNCHRO,
n RED EYE & SLOW
This mode allows you to take pictures of people at night
that clearly show both your subjects and the night time
backdrop. To prevent camera shake, always use a tripod.
Using n synchronizes Red-eye reduction mode.
Using 8 selects slow shutter speeds of up to 2 seconds.
CAUTION
In bright scenes, overexposure may occur.
Continued Q
51
d Setting the Flash
CHECK
CHECK
List of available flash modes in each Photography mode
Effective flash range (S : AUTO)
Wide-angle:
Approx. 60 cm to 4.6 m (2.0 ft. to 15.1 ft.)
Telephoto:
Approx. 60 cm to 2.7 m (2.0 ft. to 8.9 ft.)
If you take pictures outside of the effective flash range,
the image may appear dark even if the flash is used.
AUTO
b
d
C
q
✓
✓
✓
✓
H
✓
✓
✓
✓
n
✓
✓
✓
✓
✓
,
.
c
✓
✓
✓
✓
8
CAUTION Notes on using flash
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
<
✓
✓
✓
✓
✓
M
✓
✓
✓
s
52
✓
• If pressing the shutter button while the flash is charging
(indicator lamp blinking orange), the picture will be
taken without the flash (when using AUTO and b).
• The flash charging time may increase when the battery
is low on charge.
• When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
• The flash fires several times (pre-flashes and the main
flash). Do not move the camera until the picture is
taken.
• When setting > Super macro mode, the camera sets to
C Suppressed flash mode automatically and the flash
cannot be used.
j Increasing Monitor Brightness
This is useful when checking the shot composition for
outdoor scenes.
Increasing the LCD monitor
brightness
W
T
MENU
/OK
DISP/BACK
AUTO
N 25
appears on the LCD
monitor when the function is
working.
• This function is automatically canceled after each shot.
• This function is purely for checking the composition of
your shot. It does not increase the brightness of the
image.
• Even if you increase the brightness in low-light
conditions, you cannot check the subject.
Advanced Features — Photography
Press j (n) to display the LCD monitor brightly.
Press j (n) again to return to normal LCD monitor
brightness.
MEMO
UP
53
Using p-MODE MENU (Photography)/SHOOTING MENU
Use these menus to adjust image quality. You can take
pictures in a wide range of conditions.
Setting the p-MODE MENU
F
N
COLOR
9
19 FRAMES
21
35
45
219
A Press p to open the p-MODE MENU.
B Press n or o to select the menu.
C Press q.
D Press n or o to change the setting.
E Press MENU/OK to confirm the setting.
54
SHOOTING MENU
SELF TIMER
SELF-TIMER
10 SEC
EXP.COMPENSATION
EXP
COMPENSATION
2 SEC
WHITE BALANCE
OFF
CONTINUOUS
SET-UP
SET
UP
MODE MENU
ISO
QUALITY
Setting the SHOOTING MENU
A Press MENU/OK to open the SHOOTING
MENU.
B Press n or o to select the menu.
C Press q.
D Press n or o to change the setting.
E Press MENU/OK to confirm the setting.
Setting the menu (➝p.54)
Z List of p-MODE MENU options
Menu
S ISO
(➝p.56)
Functions
Factory
default
Settings
Specifies required sensitivity setting of the ambient light around the subject.
The larger value of the sensitivity, the higher sensitivity is obtained. The
AUTO/400/200/100/64
higher sensitivity settings will allow you to take pictures in darker locations.
Specifies the image size.
The larger image size, the better image quality is obtained. The smaller
image size, the larger number of images are recorded.
FinePix COLOR
(➝p.58)
Specifies required color tone.
STD/
This mode is effective for taking more vivid shots or black and white shots.
5F/5N/%/
3/2/`
5N
/
STD
Z List of SHOOTING MENU options
Menu
Functions
This setting can be used when the Mode dial is set to ?.
SCENE POSITION
H/,/./8/ /
Use this setting to provide the best photography menu setting for the scene
(➝p.40)
/ / / / /
being shot.
SELF-TIMER
(➝p.59)
S EXP.
COMPENSATION
(➝p.60)
T WHITE BALANCE
(➝p.61)
CONTINUOUS
(➝p.62)
Factory
default
Settings
/
This setting can be used with any of the modes.
(10 seconds) /
Used in situations such as group shots where the photographer is included
( (2 seconds)/OFF
in the shot.
This setting can be used when the Mode dial is set to s, <, or M.
Use this setting to obtain the correct exposure.
H
Advanced Features — Photography
QUALITY
(➝p.57)
–
OFF
–2 EV to +2 EV
(1/3 EV increments)
±0
This setting can be used when the Mode dial is set to s, <, or M.
Use this setting to adjust the color balance to suit the color of the ambient
light around the subject.
AUTO/6/7/9/0/
-/8
AUTO
This setting can be used with any of the modes.
Use this setting to select the required Continuous shooting mode.
ON/OFF
OFF
55
p-MODE MENU (Photography)
Changing the sensitivity setting
(S ISO)
Use this menu to specify required sensitivity setting of the
ambient light around the subject.
The larger value of the sensitivity, the higher sensitivity is
obtained. The higher sensitivity settings will allow you to
take pictures in darker locations.
56
Setting the menu (➝p.54)
MEMO
• Sensitivity is retained even when the camera is turned
off or the mode setting is changed.
• When anything other than s, <, or M in the
Photography mode is selected, only AUTO can be
selected for the ISO (sensitivity) setting.
• When < or M in the Photography mode is selected,
AUTO cannot be selected for the ISO (sensitivity)
setting.
CHECK
CAUTION
Settings
AUTO/400/200/100/64
Selecting AUTO as the sensitivity setting, the camera
selects the best sensitivity setting for the subject’s
brightness.
The selected sensitivity
M
N 25
setting appears on the
ISO 100
400
LCD monitor when the
sensitivity setting is set
to another setting
excluding AUTO.
Although higher sensitivity settings will allow you to take
pictures in darker locations, they will also increase the
amount of speckling in your images. Choose the
sensitivity setting that best suits the conditions.
Setting the menu (➝p.54)
Changing the quality setting
(
QUALITY)
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Area shot and quality setting
Area shot excluding %
AUTO
N 25
Area shot with %
AUTO
25
Quality mode
Sample uses
5 F (2816 × 2112) Printing at up to 10R (25.4 × 30.5 cm/
5 N (2816 × 2112) 10 × 12 in.) / A4 size
For better quality, select 5 F
% (2816 × 1880)
3 (2048 × 1536)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
2 (1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
` (640 × 480)
To use for e-mail or web site
Normal shooting provides an aspect ratio of 4:3 and %
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to an xD-Picture Card.
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes (➝p.135). The numbers
to the right of setting show the number of available
frames.
Advanced Features — Photography
Z Quality settings in Photography mode
Continued Q
57
p-MODE MENU (Photography)
Setting the menu (➝p.54)
Changing the FinePix COLOR
setting (
FinePix COLOR)
Use this menu to specify required color tone.
It is effective for taking vivid shots or black and white
shots.
CHECK
FinePix COLOR settings
The contrast and color saturation
STD
are set to standard.
p-STANDARD Use this mode for normal
photography.
p-CHROME
The contrast and color saturation
are set to high.
This mode is effective for taking
more vivid shots of subjects such as
scenery (blue sky and greenery)
and flowers.
p-B&W
This mode converts the colors in the
photographed image to black and
white.
When setting p-CHROME or p-B&W, the icon
appears on the LCD monitor.
CAUTION
When the Mode dial sets to ?,
the LCD monitor.
58
does not appear on
MEMO
p-CHROME may have little visible effect with some
subjects or the scene being shot. You may not be able to
see any difference on the LCD monitor.
SHOOTING MENU
Setting the menu (➝p.54)
Taking pictures using self-timer
(
SELF-TIMER)
Available Photography modes: All
Use this menu in situations where the photographer is
included in the shot.
2
Take pictures in selected time.
A picture is taken after the self-timer lamp changes
from lit to blinking (only blinks with the 2-second selftimer).
Advanced Features — Photography
When selecting the self-timer setting, the self-timer icon
appears on the LCD monitor.
: The picture is taken after 10 seconds.
(: The picture is taken after 2 seconds.
SHOOTING MENU
SELF TIMER
SELF-TIMER
10 SEC
EXP.COMPENSATION
EXP
COMPENSATION
2 SEC
WHITE BALANCE
OFF
CONTINUOUS
SET-UP
SET
UP
1
Press the shutter button down halfway to
focus on the subject and press the shutter
button fully.
Double
beep
Halfway pressed
Beep
Fully pressed
Pressing the shutter button down halfway that focuses
on the subject.
Without releasing the shutter button, press the button
all the way down (fully pressed) to start the self-timer.
A countdown appears on the
LCD monitor indicating the
time remaining until the
picture is taken.
Continued Q
59
SHOOTING MENU
Using the 2-second self-timer
This is useful when you worry about camera shake even if
attaching the camera on a tripod.
Setting the menu (➝p.54)
Adjusting exposure
compensation
(S EXP. COMPENSATION)
Available Photography mode: s, <, M
MEMO
• To stop the self-timer, once it has started running, press
DISP/BACK.
• Any of the following cancels the self-timer setting:
- Completing the shooting
- Changing the Photography mode setting
- Setting the camera to Playback mode
- Turning the camera off
• Take care not to stand in front of the lens when pressing
the shutter button as this can prevent the correct focus
or brightness (exposure) from being achieved.
Use this menu for shots to get the correct brightness
(exposure), such as shots with extremely high contrast
between the subject and the background.
EXP.COMPENSATION
EXP
COMPENSATION
+2
+1
-1
-2
positive (+) compensation
negative (–) compensation
CHECK
• Compensation range: –2 EV to +2 EV
(13 steps in 1/3 EV increments)
• Explanation of Terms “EV” (➝p.136)
60
Setting the menu (➝p.54)
Guide to compensation
• Backlit portraits:
+2/3 EV to +1 2/3 EV
Adjusting color balance
(T WHITE BALANCE)
Available Photography modes: s, <, M
Adjust the color balance based on white to suit the color
of the ambient light around the subject.
AUTO
• Very bright scenes (such as
snowfields) and highly
reflective subjects: +1 EV
• Shots made up predominantly of sky: +1 EV
• Spotlit subjects, particularly against dark backgrounds:
–2/3 EV
• Scenes with low reflectivity, such as shots of pine trees or
dark foliage: –2/3 EV
AUTO:
6
:
7
:
9
:
0
:
:
8
:
Automatic adjustment
Shooting outdoors in good weather
Shooting in shade
Shooting under Daylight fluorescent lamps
Shooting under Warm White fluorescent lamps
Shooting under Cool White fluorescent lamps
Shooting in incandescent light
Advanced Features — Photography
WHITE BALANCE
MEMO
MEMO
Any of the following disables exposure
compensation:
• Using the flash in AUTO or b mode
• Shooting dark scenes in d mode
• In AUTO mode, the correct white balance may not be
achieved for subjects such as close-ups of people’s
faces and pictures taken under a special light source.
Select the correct white balance for the light source.
• When the flash fires, the white balance setting for the
flash is used. Consequently, to achieve a particular
effect, the flash mode should be set to C Suppressed
flash (➝p.51).
• The color tones may vary depending on the shooting
conditions (light source, etc.).
• Explanation of Terms “White balance” (➝p.136)
Continued Q
61
SHOOTING MENU
Setting the menu (➝p.54)
Taking pictures continuously
(
CONTINUOUS)
CAUTION
Available Photography mode: q, ?,
s, <, M
Use this mode to take pictures of a moving subject.
SHOOTING MENU
SELF-TIMER
SELF
TIMER
OFF
EXP.COMPENSATION
EXP
COMPENSATION
WHITE BALANCE
AUTO
CONTINUOUS
ON
SET-UP
SET
UP
OFF
Shooting continues as long as holding the shutter button
down. This mode shoots up to 1.7 frames per second.
When taking the pictures, the last photographed image
appears and all of the images are recorded.
Z Number of available frames in Continuous
shooting mode
Number of available frames varies depending on the
quality setting in Continuous shooting mode. See p.57 for
information on changing quality setting.
62
Number of recorded
5F 5N
pixels
%
3
2
`
Maximum recorded
frames
13
22
29
140
6
12
• Number of available frames is limited depending on the
available space on the xD-Picture Card or internal
memory.
• The focus is determined in the first frame and cannot be
changed in mid-sequence.
• The exposure is determined in the first frame.
• The speed of continuous shooting varies depending on
the shutter speed.
• The flash cannot be used as the flash mode is set to C
Suppressed flash.
Using p-MODE MENU (Playback)/PLAYBACK MENU
Use these menus to play back photographed images.
Setting the p-MODE MENU
(Playback)
A Set the camera to Playback mode (➝p.33).
MODE MENU
A Set the camera to Playback mode (➝p.33).
PLAYBACK MENU
ERASE
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO
TRIMMING
FRAME
ALL FRAMES
B Press MENU/OK to open the PLAYBACK
MENU.
B Press p to open the p-MODE MENU.
C Press n or o to select the menu.
C Press n or o to select the menu.
D Press q.
D Press q.
E Press n or o to change the setting.
E Press n or o to change the setting.
F Press MENU/OK to confirm the setting.
Advanced Features — Playback
PLAYBACK
NORMAL
PRINT ORDE
NORMAL
FADE-IN
FADE
IN
FADE-IN
FADE
IN
MULTIPLE
CLOCK
Setting the PLAYBACK MENU
F Press MENU/OK to confirm the setting.
63
p-MODE MENU (Playback)
Setting automatic playback
(
PLAYBACK)
Use this mode to play back photographed images
continuously. You can select playback interval and type of
image transition.
Setting the menu (➝p.63)
DPOF set frame
(
PRINT ORDER (DPOF))
You can specify the image, number of prints, with or
without date of printing with a DPOF-compatible printer.
MODE MENU
MODE MENU
PLAYBACK
NORMAL
PRINT ORDE
NORMAL
FADE-IN
FADE
IN
FADE-IN
FADE
IN
MULTIPLE
CLOCK
MEMO
• To interrupt automatic playback, press MENU/OK.
• Press p or q to advance or go back through the
images when selecting NORMAL and FADE-IN.
• The Auto power off function (➝p.91) does not operate
during playback.
• Movie starts automatically. When the movie ends, the
playback function moves it on.
• Press DISP/BACK once during playback to display onscreen help.
64
PLAYBACK
PRINT ORD
WITH DATE
WITHOUT DATE
RESET ALL
WITH DATE E : The date will be imprinted on your
prints.
WITHOUT DATE : The date will not be imprinted on your
prints.
RESET ALL
: All DPOF settings will be canceled.
Setting the menu (➝p.63)
Z u PRINT ORDER (DPOF)
DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications
for images shot using a digital camera on media such as an xD-Picture Card. The recorded specifications include
information on which frames are to be printed.
This section gives a detailed description of how to order your prints with FinePix F650.
*Some printers do not support date and time imprinting or specification of the number of prints.
*The warnings shown below may appear while specifying the prints.
“RESET DPOF OK ?” (➝p.67)
When inserting an xD-Picture Card that contains images specified for printing by another camera, those print specifications are all
reset and replaced by the new print specifications.
[DPOF FILE ERROR] (➝p.123)
Up to 999 images can be specified on the same xD-Picture Card.
Advanced Features — Playback
“DPOF SPECIFIED. ERASE OK ?”
“DPOF SPECIFIED. ERASE ALL OK ?” (➝p.68)
When erasing the image, the DPOF setting for that image is deleted at the same time.
Continued Q
65
p-MODE MENU (Playback)
Setting the menu (➝p.63)
WITH DATE / WITHOUT DATE
Selecting WITH DATEE, E appears on the LCD
monitor and the date will be imprinted on your prints.
PRINT ORDER (DPOF
DPOF)
DPOF 00009
DPOF:
Total number of prints
MEMO Canceling DPOF setting
A Press p to open the p-MODE MENU and select
PRINT ORDER (DPOF).
B Press q.
C Press n or o to select WITH DATE E or WITHOUT
DATE.
D Press p or q to select the frame (file) with the DPOF
setting you want to cancel.
E Set the number of prints to 0 (zero).
Setting for that frame
01 SHEETS
FRAME
SET
A Press p or q to display the frame (file)
for specifying DPOF setting.
B Press n or o to set a value.
Up to 99 sheets are printed.
For frames (files) that you do not want
printed, set the number of prints to 0
(zero).
To specify more DPOF settings, repeat steps A and B.
C Always press MENU/OK after the settings
are completed.
Pressing DISP/BACK cancels those
settings.
66
To cancel the DPOF setting for another frame (file),
repeat steps D and E.
Always press MENU/OK to complete the settings.
• RESET ALL (➝p.67)
Setting the menu (➝p.63)
MEMO
• When DPOF settings were specified on another
camera.
RESET ALL
To cancel all DPOF settings:
RESET DPOF OK?
YES
RESET DPOF OK?
NO
CANCEL
Select RESET ALL in the p-MODE MENU (➝p.63).
Press MENU/OK.
MEMO
100-0001
N
ISO 100
CAUTION
• Pressing DISP/BACK while choosing settings will
cancel all current settings. If there were previous DPOF
settings, only the modifications are canceled.
• When selecting the WITH DATE setting, the date is
imprinted on your shots using the Print Service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some
cases).
• Images photographed with a camera other than FinePix
F650 may not be specified DPOF settings.
Advanced Features — Playback
When the data includes a frame (file) with DPOF
settings that were specified on another camera,
“RESET DPOF OK?” appears.
Pressing MENU/OK erases all of the DPOF settings
already specified for each frame (file). Specify the
DPOF setting for each frame (file) again.
• Prints of up to 999 frames (files) can be ordered on the
same xD-Picture Card.
• DPOF settings cannot be specified for movies.
YES
55/ 24
24/ 2006 10
10: 00 AM
1000 F2.8
u appears on the LCD monitor during playback when the
image has specified DPOF settings.
67
PLAYBACK MENU
Erasing the images
(
ERASE)
Setting the menu (➝p.63)
Erasing one frame at a time (FRAME)
ERASE OK?
Use this mode to erase unnecessary images to have
ample free space on the xD-Picture Card or internal
memory. Your camera calls images “frames”.
MEMO
• When using an xD-Picture Card, the images in the xDPicture Card are erased. When not using an xDPicture Card, the images in the internal memory are
erased.
• Protected frames (files) cannot be erased. Unprotect
the frames (files) before erasing them (➝p.70).
• If “DPOF SPECIFIED. ERASE OK?” or “DPOF
SPECIFIED. ERASE ALL OK?” appears, press MENU/
OK again to erase the frames (files).
YES
CANCEL
A Press p or q to select the erasing frame
(file).
B Press MENU/OK to erase the currently
displayed frame (file).
CAUTION
MEMO
Erased frames (files) cannot be recovered. Back up
important frames (files) onto your PC or another media.
To erase another frame (file), repeat above steps.
When erasing frames (files) is completed, press DISP/
BACK.
CAUTION
Pressing MENU/OK repeatedly erases consecutive
frames (files). Take care not to erase a frame (file) by
mistake.
68
Setting the menu (➝p.63)
Erasing all frames (ALL FRAMES)
ERASE ALL OK?
IT MAY TAKE A WHILE
YES
CANCEL
MEMO
Press DISP/BACK to cancel
erasing of all the frames
(files). Some unprotected
frames (files) will be left
unerased.
CANCEL
When shooting in the vertical position, the image appears
horizontal on the LCD monitor.
Use this mode to rotate an image and to display correct
direction. Your camera calls images “frames”.
MEMO
An image can be rotated only when playing back using
FinePix F650.
You may not be able to rotate images that were shot with
a camera other than FinePix F650.
A Press p or q to select the rotating frame
(file).
B Press MENU/OK to open the PLAYBACK
MENU.
C Press n or o to select
ROTATE.
Advanced Features — Playback
Press MENU/OK to erase all the frames
(files).
Rotating the images
(
IMAGE ROTATE)
IMAGE
D Press MENU/OK.
Continued Q
69
PLAYBACK MENU
Setting the menu (➝p.63)
Protecting the images
(
PROTECT)
IMAGE ROTATE
Use this mode to prevent frames (files) from being
accidentally erased. Your camera calls images “frames”.
SET
CANCEL
FRAME SET / RESET
E Press n or o to rotate the image.
o: Rotates the image clockwise at a 90
degree angle.
n: Rotates the image counterclockwise at
a 90 degree angle.
UNPROTECT OK?
PROTECT OK?
YES
CANCEL
Unprotected
YES
CANCEL
Protected (F appears)
A Press p or q to select the protecting/
unprotecting frame (file).
B Press MENU/OK to protect/unprotect the
currently displayed frame (file).
Unprotected: protecting frame (file)
Protected: reset frame (file)
F Press MENU/OK to confirm the setting.
Next time the image is played back, it will
be automatically rotated.
70
To protect another frame (file), repeat steps A and B.
When protecting frames (files) is completed, press DISP/
BACK.
Setting the menu (➝p.63)
MEMO To stop the procedure midway
SET ALL
SET ALL OK?
IT MAY TAKE A WHILE
CANCEL
YES
CANCEL
If the images are very large, protecting or unprotecting all
the frames (files) may take some time.
If you want to take a picture or record a movie during the
procedure, press DISP/BACK.
CAUTION
RESET ALL
The Format function erases all the frames (files),
including protected frames (files) (➝p.90).
RESET ALL OK?
IT MAY TAKE A WHILE
YES
Continued Q
Advanced Features — Playback
Press MENU/OK to protect all the frames
(files).
CANCEL
Press MENU/OK to unprotect all the frames
(files).
71
PLAYBACK MENU
Setting the menu (➝p.63)
Copying the images
(V COPY)
Copying one frame at a time (FRAME)
COPY
It is possible to transfer saved images between the
internal memory and an xD-Picture Card. Your camera
calls images “frames”.
INTERNAL MEMORY. CARD
FRAME
CARD
INTERNAL MEMORY.
ALL FRAMES
Z Selecting COPY
YES
CANCEL
COPY
INTERNAL MEMORY.
CARD
CARD
INTERNAL MEMORY.
NEXT
A Press n or o to select FRAME.
CANCEL
B Press MENU/OK.
A Press n or o to select Y INTERNAL
MEMORY ➡ \ CARD or \ CARD ➡ Y
INTERNAL MEMORY.
C Press p or q to select the copying frame
(file).
D Press MENU/OK to copy the currently
displayed frame (file).
B Press q.
MEMO
To copy another frame (file), repeat steps C and D.
When copying frames (files) is completed, press DISP/
BACK.
72
Setting the menu (➝p.63)
Copying all frames (ALL FRAMES)
COPY
INTERNAL MEMORY.
CARD
FRAME
CARD
INTERNAL MEMORY.
ALL FRAMES
Adding voice memos to the
images (
VOICE MEMO)
Voice memos of up to 30 seconds can be added to still
images.
Recording voice memos
YES
CANCEL
A Press n or o to select ALL FRAMES.
B Press MENU/OK to open the PLAYBACK
MENU.
B Press MENU/OK.
C Press n or o to select
VOICE MEMO.
C Press MENU/OK to copy all the frames
(files).
D Press q.
Advanced Features — Playback
A Press p or q to select the image to add
a voice memo.
CAUTION
• When [\ CARD FULL] or [Y CARD FULL] appears
on the LCD monitor, copying the data stops on the way.
• When copying the image that has specified DPOF
setting, the DPOF setting is not copied.
Continued Q
73
Setting the menu (➝p.63)
PLAYBACK MENU
30s
REC STANDBY
START
FINISH
CANCEL
REC
F The voice memo ends when pressing
MENU/OK midway or 30 seconds pass.
E Press MENU/OK to start recording.
Face the microphone on the front of the camera to record
your comment. Hold the camera about 20 cm (7.9 in.)
away for the best results.
RE-REC
RE
REC
To record your comment: press MENU/OK.
To rerecord the comment: press DISP/BACK.
MEMO
• When the image already has a voice memo
If you select an image that
already has a voice memo, a
screen appears in which you
can select whether to rerecord
the memo.
PLAYBACK MENU
Microphone
The remaining recording time appears during recording
and the self-timer lamp blinks.
When the time remaining reaches 5 seconds, the selftimer lamp starts blinking quickly
RECORDING
28s
Remaining
time
Blinking red
REC
74
RE-REC
RE
REC
ERASE
IMAGE ROTATE
PROTECT
COPY
VOICE MEMO
TRIMMING
BACK
RE-REC
RE
REC
• When [PROTECTED FRAME] appears, unprotect the
frame (➝p.70).
• Voice memos cannot be added to movies.
Setting the menu (➝p.63)
Z Playing back voice memos
Playing back voice memo
A Press p or q to select an image file with
a voice memo. # appears on the LCD
monitor.
B Press o to start playing back the voice
memo.
STOP
The playback time appears on
the LCD monitor along with a
progress bar.
PAUSE
Description
Playback begins.
The voice memo stops when
playback ends.
Pause /
Resume
Pauses the voice memo during
playback.
Press o again to resume
playback.
Stop
Stops playback.
Press p or q while voice
memo playback is stopped to go
back to the previous file or
advance to the next file
respectively.
Fast forward /
Rewind
Press p or q during playback
to skip forwards or backwards
through the voice memo.
These buttons do not function
while playback is paused.
Progress bar
CAUTION
Advanced Features — Playback
15s
Control
Playback
CHECK
Speaker
Uncover the speaker.
The sound may be difficult to hear.
• Audio recording format:
WAVE (➝p.136), PCM recording format
• Audio file size:
Approx. 240 KB (for a 30-second voice memo)
MEMO Playing voice memo files
You may not be able to play back some voice memo files
recorded on other cameras.
Continued Q
75
PLAYBACK MENU
Setting the menu (➝p.63)
Adjusting volume of voice memos
Volume can be adjusted while playing back voice memos.
Trimming the images
(
TRIMMING)
Use this mode to trim the required part of the
photographed image.
VOLUME
W button
(Zoom out)
7
TRIMMING
TRIMMING
SET
CANCEL
A Press MENU/OK while playing back voice
memo.
The voice memo is paused during
playback.
YES
C Press MENU/OK to confirm your selection.
Camera starts to play back the voice
memo.
YES
CANCEL
CANCEL
Zoom bar
A Press W or T to zoom in or out on an
image.
B Press n or o to adjust the volume.
76
T button
(Zoom in)
CHECK
Before selecting
frame (file).
TRIMMING, select the trimming
Setting the menu (➝p.63)
MEMO
TRIMMING
Navigation screen
(Current displayed image)
YES
CANCEL
Press DISP/BACK to return to single-frame playback.
3
Printing at up to 6R (15.2 × 20.3 cm/6 × 8 in.) /
A5 size
2
Printing at up to 4R (10.2 × 15.2 cm/4 × 6 in.) /
A6 size
`
To use for e-mail or web site
• When % quality setting is selected, the image is
trimmed to normal size (4:3 aspect ratio).
CAUTION
C Press MENU/OK.
REC OK?
REC
You may not be able to trim images that were shot with a
camera other than FinePix F650.
Advanced Features — Playback
B Press n, o, p, or q to display another
part of the image.
• A saved image size varies depending on the zoom
scale of step A. For 0.3 M, k YES option appears
in yellow.
• Image sizes
CANCEL
D Check the saved image size and press
MENU/OK.
The trimmed image is added as a separate
file in the final frame.
77
r Recording Movies
Use this mode to record movies with sound.
1
Set the camera to r Movie mode.
Z Zooming the image
You must zoom beforehand as you cannot zoom during
recording.
Set the Mode dial to r.
STANDBY
13s
Zoom bar
Press W or T to zoom in or out on an
image.
STANDBY
13s
The available recording time
appears on the LCD
monitor.
CHECK
• Optical zoom focal length
Approx. 35 mm to 175 mm (35 mm camera equivalent)
Max. zoom scale: 5×
• Focal range
Approx. 60 cm (2.0 ft.) to infinity
78
2
CHECK Recording movies
Record movies.
REC
12s
• Specifications: Motion JPEG (➝p.136), Monaural
sound
• Quality selection method: % (640 × 480 pixels)
$ (320 × 240 pixels)
• Frame rate (➝p.136): 30 frames per second (fixed)
MEMO
Fully pressed
CAUTION
Recording ends when pressing
the shutter button down
halfway during recording or the
remaining time runs out.
Halfway pressed
MEMO
There is no need to hold down the shutter button during
recording.
• Because a movie is recorded onto the xD-Picture Card
or internal memory as it is saved, it cannot be recorded
correctly if the camera suddenly loses power (if the
battery runs out or the AC power adapter is
disconnected).
• A movie file taken by FinePix F650 may not be playable
on other cameras.
• Because sound is recorded concurrently with the
images, make sure that you do not cover the
microphone with a finger, etc. (➝p.13).
• Camera operation noises may be recorded during
movie shooting.
Advanced Features — Movie
Press the shutter button down fully to start recording.
During recording, lREC and a counter that shows the
remaining time appear on the LCD monitor.
• The brightness and color of the LCD monitor shown
during movie recording may differ from those shown
before recording begins.
• Pressing the shutter button down fully fixes the focus,
however the exposure and white balance are adjusted
to the scene being shot.
• If recording is stopped immediately after it begins,
1 second of the movie is recorded onto the xD-Picture
Card or internal memory.
79
r Recording Movies
Changing movie size
Press p to open the p-MODE MENU.
MODE MENU
QUALITY
30s
48s
MEMO
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• In r Movie mode, you cannot set the S (sensitivity)
setting and
FinePix COLOR setting.
• See p.135 for information on recording times per xDPicture Card or internal memory.
CAUTION
A Press q.
B Press n or o to change the setting.
C Press MENU/OK to confirm the setting.
Z Quality settings in Movie mode
% (640 × 480 pixels): For better quality
$ (320 × 240 pixels): To record longer movies
80
If you shoot using the xD-Picture Cards with model
numbers containing “M” such as DPC- M1GB, movie
recording time may be reduced if you repeatedly record
and erase (frame erase) image files.
In such a case, erase all frames or format the xD-Picture
Card before use. Back up important frames (files) onto
your PC or another media.
w Playing Back Movies
Setting the camera to w
Playback mode (➝p.33)
Z Playing back movies
Control
Playback
PLAY
A Press p or q to select the movie file. r
appears on the LCD monitor.
30s
STOP
PAUSE
Progress bar
The playback time appears on
the LCD monitor along with a
progress bar.
Pause /
Resume
Pauses the movie during
playback.
Press o again to resume
playback.
Stop
Stops playback.
Press p or q while playback is
stopped to go back to the previous
file or advance to the next file
respectively.
Fast
forward /
Rewind
Press p or q during playback to
skip forwards or backwards
through the movie.
Skip
playback
Press p or q when the movie is
paused, the movie advances or
goes back one frame.
Hold down p or q to move
through the frames quickly.
Advanced Features — Movie
B Press o to begin playing back movie.
Description
Playback begins.
Playback stops when the end of
the movie is reached.
Continued Q
81
w Playing Back Movies
MEMO
If the subject of the shot is very bright, white vertical
streaks or black horizontal streaks may appear in the
image during playback. This is normal.
Setting the camera to w Playback mode (➝p.33)
Adjusting volume of movies
Volume can be adjusted while playing back movies.
VOLUME
CAUTION
• You may not be able to play back some movie files
recorded on other cameras.
• To play back movie files on a PC, save the movie file on
the xD-Picture Card or internal memory to the PC’s
hard disk and then play back the saved file.
• Uncover the speaker. The sound is difficult to hear.
7
SET
CANCEL
A Press MENU/OK while playing back
movie.
The movie is paused during playback.
B Press n or o to adjust the volume.
C Press MENU/OK to confirm the setting.
Camera starts to play back the movie.
82
U SET-UP
Using the SET-UP menu
1
Open the SET-UP menu.
A Press MENU/OK to open the menu.
B Press n or o to select U SET-UP.
C Press q.
2
Change the page.
DATE/TIME
DATE
TIME
BEEP VOLUME
SHUTTER VOLUME
PLAYBACK VOLUME
LCD BRIGHTNESS
FORMAT
Change the setting.
SET-UP
SET
UP
DATE/TIME
DATE
TIME
BEEP VOLUME
SHUTTER VOLUME
PLAYBACK VOLUME
LCD BRIGHTNESS
FORMAT
OFF
A Press n or o to select the menu.
B Press q.
Different type of screen appears
depending on selected item.
Settings
SET-UP
SET
UP
3
C Press n or o to change the setting.
D Press MENU/OK to confirm the setting.
A Press p or q to select the page.
Continued Q
B Press o to move to menu item.
83
U SET-UP
How to use the SET-UP menu (➝p.83)
SET-UP menu option
Setting
Display
Factory default
Explanation
Page
Sets the time for displaying the check image screen
(photograph result) after taking a picture. The color
tones in images recorded may differ from actual
color. Play back the recorded images to check
them.
86
IMAGE DISP.
1.5 SEC/3 SEC/
ZOOM
(CONTINUOUS)
1.5 SEC
FRAME NO.
CONT./RENEW
CONT.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
87
DIGITAL ZOOM
ON/OFF
OFF
Specifies whether digital zoom is used together.
88
LCD POWER
SAVE
ON/OFF
ON
Darkens the LCD monitor when camera is not used.
89
–
–
Corrects the date or time.
24
–
q
DATE/TIME
BEEP VOLUME
/
/
/
Sets the volume of the tone emitted when the
camera controls are used.
SHUTTER
VOLUME
/
/
/
Sets the volume of the sound emitted when the
shutter operates.
–
89
PLAYBACK
VOLUME
–
–
Sets the volume of playing back movie and voice
memo.
LCD BRIGHTNESS
–
–
Sets the LCD monitor brightness.
90
–
Initializes an xD-Picture Card or internal memory.
Select this menu to erase all the frames (files).
90
FORMAT
84
–
How to use the SET-UP menu (➝p.83)
Setting
Display
Factory default
ENGLISH
91
@DSC
Provides a simple way to read images from an xDPicture Card or internal memory and store images
onto an xD-Picture Card.
105
<PICTBRIDGE
When a printer that supports PictBridge is available,
images can be printed by connecting the camera
directly to the PictBridge-compatible printer without
a PC.
95
–
Specifies whether video output is set to NTSC or
PAL.
–
–
Resets all the camera settings (other than the
DATE/TIME,
, TIME DIFFERENCE,
and VIDEO SYSTEM) to the factory default values
set at shipment. A confirmation message appears
when you press q. To reset the camera settings,
press MENU/OK.
–
TIME
DIFFERENCE
N/I
N
RESET
NTSC/PAL
–
@
Settings
Specifies the time difference settings.
2 MIN
VIDEO SYSTEM
25
91
OFF/2 MIN/ 5MIN
@/<
Page
Sets the time of turning camera off when camera is
not used.
AUTO POWER
OFF
USB MODE
Explanation
Specifies the language used for LCD monitor
display.
Continued Q
85
U SET-UP
IMAGE DISP.
Use this setting to set the way for displaying the check
image screen (photograph result) after taking a picture.
3 SEC/1.5 SEC:
The image appears for about 3 or 1.5 seconds and is
then recorded.
ZOOM (CONTINUOUS):
The image appears enlarged. Use this mode to check
details of image.
How to use the SET-UP menu (➝p.83)
Z Enlarging images
ZOOM (CONTINUOUS
CONTINUOUS)
Navigation screen
(Current displayed image)
NEXT SHOOTING
MEMO
A Press W or T to zoom in or out the
image.
In continuous shooting, the images do not appear.
CAUTION
B Press n, o, p, or q to display
another part of the image.
The color tones in images displayed when 3 SEC or 1.5
SEC is selected may differ slightly from those in the
images actually recorded.
C Press MENU/OK to take another
picture.
MEMO
• When ` quality setting is selected, the image cannot
be enlarged.
• Pressing DISP/BACK cancels the zoom setting.
• This function is disabled when setting the continuous
shooting.
86
How to use the SET-UP menu (➝p.83)
CHECK
FRAME NO.
Frame number
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin
again.
<CONT.>
100-0001
File number
<RENEW>
A
B
* Formatted xD-Picture Card or internal memory used
for both A and B.
RENEW : Pictures are stored on each xD-Picture Card
beginning with a file number 0001.
The last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers, while
the first 3 digits show the directory number.
MEMO
• Setting this function to CONT. makes file management
easier as it makes sure that file names are not
duplicated when images are downloaded to a PC.
• When the camera settings are
RESET (➝p.85), the
frame number setting (CONT. or RENEW) is changed
to CONT. and the frame number itself does not return to
0001.
• In CONT. setting, images are stored beginning from the
highest file number on the current xD-Picture Card
when the xD-Picture Card already contains image files
with file numbers higher than the highest file number on
the last xD-Picture Card.
• File number runs from 0001 to 9999. Once 9999 is
exceeded, the directory number changes from 100 to
101. The maximum number is 999-9999.
• The displayed frame number may differ for images
photographed on other cameras.
Settings
CONT. : Pictures are stored beginning from the highest
file number stored on the last xD-Picture Card
or internal memory used.
Directory number
Continued Q
87
U SET-UP
How to use the SET-UP menu (➝p.83)
MEMO
DIGITAL ZOOM
Use this function to shoot enlarged images than
maximum optical zoom scale.
AUTO
CAUTION
Zoom bar
Z Zoom bar display
OFF
Optical zoom: 5×
ON
Optical zoom: 5×
Digital zoom:
approx. 4.4×
CHECK
• Optical zoom focal length*
Approx. 35 mm to 175 mm
• Digital zoom focal length*
Approx. 175 mm to 770 mm
Max. zoom scale: approx. 4.4×
* 35 mm camera equivalents
88
When zooming changes between optical and digital, the
position of the “ ” indicator stops. Press the same Zoom
button again to start the “ ” indicator moving again.
Using the digital zoom allows you to enlarge your subject
and shoot it. However, it will lower your image quality. Set
the digital zoom when requiring it.
How to use the SET-UP menu (➝p.83)
LCD POWER SAVE
PLAYBACK VOLUME
The LCD monitor darkens when camera is not used for 10
seconds.
When this function is active, you can save power and get
the maximum possible running time from your battery.
Use this function to adjust volume while playing back
movie and voice memo.
MEMO
VOLUME
7
Pressing any button wakes the camera up.
CAUTION
The LCD power save function is disabled during Playback
mode and Movie mode.
SET
CANCEL
B Press MENU/OK to confirm the setting.
Settings
A Press n or o to adjust the volume.
The larger the number, the larger the
volume is emitted. 0 (zero) indicates a
sound deadening.
Continued Q
89
U SET-UP
How to use the SET-UP menu (➝p.83)
LCD BRIGHTNESS
FORMAT
Use this function to adjust the LCD monitor brightness.
Initialize (format) the xD-Picture Card or internal memory
for use with the camera.
BRIGHTNESS
FORMAT
FORMAT OK?
0
ERASE ALL DATA
OK
SET
CANCEL
CANCEL
SET
A Press n or o to adjust the LCD monitor
brightness.
The indicator moves to the + to display the
LCD monitor brightly or to the – to darken
the LCD monitor.
B Press MENU/OK to confirm the setting.
Place of initialize
Y FORMAT:
Internal memory
\ FORMAT:
xD-Picture Card
A Press p or q to select OK.
B Pressing MENU/OK initializes the xDPicture Card or internal memory.
CAUTION
The Format function erases all the frames (files),
including protected frames (files).
Back up important frames (files) onto your PC or another
media.
90
How to use the SET-UP menu (➝p.83)
AUTO POWER OFF
TIME DIFFERENCE
When this function is active and the camera remains
unused for 2 or 5 minutes, it turns camera off.
Use this function when you want to get the maximum
possible running time from your battery.
Use this function when traveling to destinations in
different time zones. This function sets a time difference
relative to the date and time currently set. When this
setting is enabled, the specified time difference is applied
when pictures are taken.
CAUTION
The Auto power off function is disabled during automatic
playback (➝p.64), and when a USB connection (➝p.95,
106) is being used.
MEMO To restore power to the camera
Refer to “Turning On and Off” (➝p.21).
1
Use Time difference function.
SET-UP
SET
UP
AUTO POWER OFF
TIME DIFFERENC
USB MODE
VIDEO SYSTEM
RESET
ENGLISH
2 MIN
HOME
LOCAL
Settings
Press n or o to change between N HOME
and I LOCAL.
To set the time difference, select I LOCAL.
N HOME: Your home time zone
I LOCAL: Your destination time zone
Continued Q
91
U SET-UP
2
Move to TIME DIFFERENCE screen.
CHECK
Available time setting
–23:45 to +23:45 (in 15-minute increments)
SET-UP
SET
UP
AUTO POWER OFF
TIME DIFFERENC
USB MODE
VIDEO SYSTEM
RESET
ENGLISH
2 MIN
HOME
LOCAL
Set time difference.
CANCEL
A Press p or q to select +/–, hour, and
minute.
B Press n or o to change the setting.
C Always press MENU/OK after the settings
are completed.
92
N 25
In the time difference
setting, when you change to
the Photography mode, I
and the date is displayed for
3 seconds, the date display
turns yellow.
CHECK
TIME DIFFERENCE
55/ 24
24/ 2006 10
10: 00 AM
55/ 24
24/ 2006 10
10: 00 AM
SET
M
55/ 24
24/ 2006 11
10
10: 00 AM
11:
Press q.
3
MEMO
Upon returning from a trip, always change the time
difference setting back to N HOME.
Connecting to a TV
When connecting to a TV, images can be displayed on wider screen. Using Automatic playback function (➝p.64) together, you
can have fun with folks.
AC-5VX
(sold separately)
W
Plug the A/V cable (included) into
the A/V OUT (Audio/Visual
output) socket of the camera.
T
Video (yellow)
To terminals
D
W
T
Audio (white)
Plug the other end of the cable into the
audio/video input socket on the TV.
DIS
P/B
ACK
MEMO
• Plug the A/V cable (included) and the AC power adapter
correctly and push them in each terminal.
• See p.118 for the information of the AC power adapter.
• When connecting the A/V cable (included) to TV, the
LCD monitor is turned off. However, during movie
recording, movie images appear on the LCD monitor.
The movie images cannot be shown on a TV.
• The image quality for movie playback is lower than for
still images.
• Refer to the instructions provided with your TV for more
information on audio/video input for your TV.
• Use the AC-5VX (sold separately) when FinePix F650
is connected to a TV for long periods.
Camera Connection
CAUTION
93
Connecting Camera Directly to Printer — PictBridge Function
When a printer that supports PictBridge is
available, images can be printed by
connecting the camera directly to the
PictBridge-compatible printer without a PC.
Before connecting to a printer
SET-UP
SET
UP
AUTO POWER OFF
TIME DIFFERENCE
USB MODE
VIDEO SYSTEM
RESET
ENGLISH
2 MIN
NTSC
SHOOTING MENU
SELF-TIMER
SELF
TIMER
CONTINUOUS
SET-UP
SET
UP
OFF
OFF
D Press p or q to move to
E Press n or o to select
A Press MENU/OK to open the menu.
B Press n or o to select U SET-UP.
C Press q to open the SET-UP menu.
94
F Press q.
.
USB MODE.
Connecting to a printer
SET-UP
SET
UP
ENGLISH
AUTO POWER OFF
2 MIN
TIME DIFFERENCE
USB MOD
DSC
VIDEO S
PICTBRIDGE
RESET
A Connect the camera to your printer using the USB
cable (included).
AC-5VX
(sold separately)
T
G Press n or o to select
<PICTBRIDGE.
H Press MENU/OK to confirm the setting.
I Press POWER to turn the camera off.
;
USB socket
W
T
/BAC
K
MEMO
Use the AC-5VX (sold separately) when FinePix F650 is
connected to a printer for long periods.
Camera Connection
DISP
Continued Q
95
Connecting Camera Directly to Printer — PictBridge Function
B Connect the camera to a printer and turn the printer on.
Press POWER to turn the camera on.
USB
PICTBRIDGE
“CHECKING USB”
appears on the LCD
monitor.
Specifying images for printing
(PRINT WITH DATE / PRINT
WITHOUT DATE)
PICTBRIDGE
TOTAL 00002
TOTAL:
CHECKING USB
USB...
...
02 SHEETS
C The following screen appears on the LCD monitor after
a moment.
“Specifying images for
printing”
➝p.96
“Printing with DPOF setting”
➝p.97
PICTBRIDGE
TOTAL 00000
TOTAL:
00 SHEETS
FRAME
OK
FRAME
OK
SET
A Press p or q to display the frame (file)
for specifying PRINT setting.
B Press n or o to set a value.
Up to 99 sheets are printed.
SET
To specify more PRINT settings, repeat steps A and B.
MEMO
• If the screen of step C does not appear, check whether
the
USB MODE setting is < PICTBRIDGE.
• Depending on the printer, some functions are disabled.
96
C Press MENU/OK to display the confirm
setting.
PRINTING
1/9SHEETS
SHEETS
Printing with DPOF setting
(u PRINT DPOF)
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
CANCEL
D Press MENU/OK again to download the
data to the printer and start printing the
specified number of prints.
MEMO
A Press DISP/BACK to open the menu.
Even if MENU/OK is pressed with total number of images set
at 0 (zero), the image that is displayed is printed once.
MEMO Printing with date
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
A Press DISP/BACK to
display the setting
display.
B Press n or o to select
PRINT WITH DATE E.
C Press MENU/OK to display the confirm
setting.
PRINT DPOF OK?
TOTAL : 99SHEETS
SHEETS
C Press MENU/OK.
Camera Connection
PICTBRIDGE
B Press n or o to select u PRINT DPOF.
CAUTION
PRINT WITH DATE E is not available when the camera
is connected to a printer that does not support date
printing.
YES
CANCEL
D Press MENU/OK again to download the
data to the printer and start printing the
specified frames (files) continuously.
Continued Q
97
Connecting Camera Directly to Printer — PictBridge Function
CHECK
MEMO
To select uPRINT DPOF, the DPOF settings must be
specified on FinePix F650 beforehand (➝p.64).
DPOF setting can be specified for images on internal
memory.
CAUTION
CAUTION
Even when WITH DATE E is specified in the DPOF
settings (➝p.64), the date is not inserted on printers that
do not support date printing.
• In PictBridge function, images photographed on other
than a camera may not be printed.
• Do not connect to a PC when the USB MODE setting
is set to <PICTBRIDGE. See p.130 if you connect
to a PC by mistake.
• The camera cannot be used to specify printer settings
such as the paper size and print quality.
• Use internal memory or an xD-Picture Card that was
formatted on FinePix F650.
• Movies cannot be printed.
• Images photographed with a camera other than FinePix
F650 may not be printed.
MEMO
PRINTING
1/9SHEETS
SHEETS
CANCEL
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be
canceled immediately or printing may stop midway
through.
When printing stops midway, briefly turn the camera off
and then on again.
Disconnecting the printer
A Check that “PRINTING” is not displayed on the
camera’s LCD monitor.
B Turn the camera off. Unplug the USB cable (included).
98
Installation on a Windows PC
Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Operating System*1
Windows 98 (including the Second Edition)
Windows Millennium Edition (Windows Me)
Windows 2000 Professional*2
Windows XP Home Edition*2
Windows XP Professional*2
CPU
200 MHz Pentium minimum
RAM
64 MB minimum
Hard disk space
Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Display
800 × 600 pixels or better, 16-bit color or better
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 or better)
Internet connection*3
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k or better recommended
Continued Q
Software Installation
*1 Models with one of the above operating systems pre-installed.
*2 When you install the software, login using a system administrator account (e.g. “Administrator”).
*3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
99
Installation on a Windows PC
Z Recommended system
Operating System
Windows XP
CPU
2 GHz Pentium 4 or better recommended
RAM
512 MB or better recommended
Hard disk space
2 GB or better
Display
1024 × 768 pixels or better, Highest (32 bit)
Internet connection
Broadband (ADSL, FTTH, CATV, etc.)
MEMO
• Connect the camera directly to the PC using the USB cable (included). The software may not operate correctly when you use an
extension cable or connect the camera via a USB hub.
• When your PC has more than one USB port, the camera can be connected to either port.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
• Windows 95 and Windows NT cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
• When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for the FinePix Internet Service
are deleted from your PC. Click the [Register now] button, enter your registered user ID and password and download the menu
again.
100
Do not connect the camera to your PC
until the software installation is
completed.
1
Install FinePixViewer as instructed in the
Quick start guide.
Installing other applications
You may see messages for installing ImageMixer VCD2 LE for
FinePix. Install this application as directed by the on-screen
instructions.
2
Launching the installer manually
A Double-click the “My Computer” icon.
* Windows XP users should click “My Computer” in the “Start”
menu.
B Right-click “FINEPIX” (CD-ROM drive) in the “My
Computer” window and select “Open”.
C Double-click “SETUP” or “SETUP.exe” in the CD-ROM
window.
CAUTION
• If the latest version is already installed, this window
does not appear.
• Do not remove the CD-ROM during this procedure.
3
After restarting, the USB Video Class Driver
would be installed.
• If the latest version is already installed, this window
does not appear.
• The driver is only installed on Windows XP SP1.
4
After restarting the PC, a message appears
stating “Installation of the FinePixViewer
has been completed”.
Software Installation
CAUTION
* The way file names are displayed differs as described below
depending on your PC settings.
-File extensions (3-letter suffixes indicating the file type)
may be shown or hidden. (e.g. Setup.exe or Setup)
-Text may be shown normally or all in uppercase (e.g. Setup
or SETUP).
Install DirectX as directed by the on-screen
instructions and then restart your PC. If the
latest version of DirectX is already installed
on your PC, this installation is not
performed.
101
Installation on a Mac OS X
Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the
installation.
Compatible Mac
Power Macintosh G3*1, PowerBook G3*1,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, or Power Macintosh G5
Operating System
Mac OS X (compatible with version 10.2.8 to 10.4.4)
RAM
192 MB minimum
256 MB or better recommended
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Display
800 × 600 pixels or better, at least 32,000 colors
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 or better)
Internet connection*2
• To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
• Connection speed: 56 k or better recommended
*1 Models with a USB port as a standard feature
*2 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
MEMO
• Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use
an extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
• Additional USB interface board is not guaranteed.
102
1
Turn your Macintosh on and start up Mac
OS X. Do not launch any other applications.
2
When the bundled CD-ROM is loaded into
the CD-ROM drive, the “FinePix” icon
appears. Double-click the “FinePix” icon to
open the “FinePix” volume window.
3
4
Double-click on “Installer for MacOSX”.
The Installer setup dialog appears. Click the
[Installing FinePixViewer] button.
CAUTION
For more information on what is installed, click the [Read
Me First] button and [Using FinePixViewer] button.
5
The “Authenticate” dialog appears.
Enter the name and password for the
administrator account and then click the
[OK] button.*
* The administrator account is the user account used for
Mac OS X installation and you can confirm the user
account in the Accounts dialog in the System
Preferences.
The “License” dialog appears. Read the
agreement carefully and then, if you agree
to the terms of the Agreement, click the
[Accept] button.
7
The “Read me” dialog appears. Click the
[Continue] button.
8
The “FinePixInstallOSX” window appears.
Click the [Install] button to install
FinePixViewer and RAW FILE CONVERTER
LE.
Continued Q
Software Installation
6
103
Installation on a Mac OS X
9
The ImageMixer VCD2 LE for FinePix
installer automatically starts up and a
window showing the installation progress
appears (Installation may take several
minutes).
10 The “FinePixViewer installation completed”
13 Select “Other...” from “When a camera is
connected, open”.
14 Select “FPVBridge” from “FinePixViewer”
folder in the “Applications” folder and click
the [Open] button.
message dialog appears. Then click exit
button and close it.
CAUTION
When Safari is used as the Web browser, a message may
be displayed and the CD-ROM may not be removed. If
this happens, click the Safari icon in the Dock to make
Safari the active application and then select “Quit Safari”
in the “Safari” menu to shut down Safari.
11 Launch “Image Capture” from the
“Applications” folder.
12 Change the Image Capture settings.
Select “Preferences...” from the “Image
Capture” menu.
104
15 Select “Quit Image Capture” menu in the
“Image Capture” menu.
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
MEMO
D Select @ DSC in
USB MODE in the
SET-UP menu (➝p.85).
SET-UP
SET
UP
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
Refer to Software
Installation (➝p.99, 102)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
CD-ROM
the PC before installing all
(Software for FinePix CX)
the software.
A Insert the xD-Picture Card with images into the
camera (➝p.19).
ENGLISH
AUTO POWER OFF
2 MIN
TIME DIFFERENCE
USB MOD
DSC
VIDEO S
PICTBRIDGE
RESET
E Press POWER to turn the camera off.
F Turn your PC on.
Continued Q
CAUTION
B Press w for about 1 second to turn the
camera on in Playback mode.
Software Installation
• Do not format the xD-Picture Card in the camera on
the PC.
• Use the xD-Picture Card with images taken by a
FUJIFILM Digital camera.
C Press MENU/OK to display the SET-UP
menu.
Refer to “Using the SET-UP menu”
(➝p.83).
105
Connecting to a PC
G Connect the camera to your PC using the USB cable
(included).
AC-5VX
(sold separately)
T
CAUTION
When displaying “CHECKING USB”
If “CHECKING USB” appears and then
[COMMUNICATION ERROR] is displayed on the LCD
monitor, @ DSC is not selected in
USB MODE.
Disconnect the USB cable (included) to the camera and
restart the procedure from step C.
CAUTION
;
USB socket
W
T
DISP
/BAC
K
H Press w for about 1 second to turn the
camera on in Playback mode.
106
• Always use the FUJIFILM AC Power Adapter AC-5VX
(sold separately). If the camera suddenly loses power
during data exchange, the xD-Picture Card or internal
memory could be damaged.
• Do not disconnect the USB cable (included) when the
camera is communicating with a PC. If disconnecting
the USB cable (included) during communication, the
files on the xD-Picture Card or internal memory may
cause damage.
• In Mac OS X, you must set the automatic setup when
the first time you connect the camera to your PC.
• Make sure that USB cable (included) is connected
correctly and pushed in.
• Perform pre-arranged steps to disconnect and turn off
the camera (➝p.108).
• When the camera and PC are exchanging data, the
self-timer lamp blinks and the indicator lamp blinks
alternately green and orange.
• Auto power off is disabled during USB connection.
• Before replacing the xD-Picture Card, always
disconnect the camera from the PC. See p.108 for
information on the disconnection procedure.
• The camera and PC may be exchanging data even
when “Copying” disappears on your PC screen. Before
disconnecting the USB cable (included), always check
that the indicator lamp is off.
I Set a PC.
Windows 98 / 98 SE / Me / 2000 Professional /
Macintosh
• A removable disk icon appears and you can use your
PC to transfer files to and from the camera.
Windows
Macintosh
CAUTION
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
• FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
Continued Q
Software Installation
* Screen for Windows 2000 Professional
If the above operations do not occur, you do not have the
required software programs or drivers installed on your
PC. Complete the required PC setup procedures. Then
reconnect the camera to your PC.
107
Connecting to a PC
Windows XP
A The “Found New Hardware” help message appears in
the bottom-right corner of your screen. This message
will close when the settings are completed. No action
is required.
Disconnecting the camera
1
Windows
Once the image has been saved, the window below
appears (Save Image Wizard Windows). To
disconnect the camera, click the [Remove] button.
CAUTION
This step is not required for subsequent connections.
B A new removable disk icon appears in the “My
Computer” window.
FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box)
appears. Follow the instructions provided on screen to
save the images. To proceed without saving the
images, click the [Cancel] button.
Macintosh
Regarding the icons
The next time you connect the camera, the removable disk
drive icon’s name changes to the “FinePix” icon and name.
Proceed to “USING FinePixViewer” (➝p.109).
108
Once the image has been saved, the window below
appears. To disconnect the camera, click the [OK]
button.
Using FinePixViewer
2
A Press POWER to turn the camera off.
B Unplug the USB cable (included) from the
camera.
W
T
DISP
AC-5VX
(sold separately)
/BAC
K
; USB socket
Mastering FinePixViewer
For all information on FinePixViewer functions, refer to
“How to Use FinePixViewer” in the Help menu for details.
• What is explained in “How to Use FinePixViewer”...
“How to Use FinePixViewer” covers a range of topics,
including batch processing and ordering prints.
Example: Looking up slide shows
A Click “How to Use FinePixViewer” in the FinePixViewer
Help menu.
B Click “Basic Operation” and then click “Slide Show” in
the menu that appears.
C The “Slide Show” information appears. Press the “<<<”
key to view the previous page or the “>>>” key to view
the next page.
Software Installation
Continued Q
109
Connecting to a PC
Uninstalling the software
Only perform this operation when you no longer require
the installed software or when the software was not
installed correctly.
E When the message appears, click the [OK] button.
Check your selection carefully since the process
cannot be canceled once you click the [OK] button.
Windows
A Check that the camera is not connected to the PC.
B Quit all currently running applications.
C Open the “My Computer” window. Then open the
“Control Panel” and double-click on “Add/Remove
Programs”.
F Automatic uninstallation begins.
When uninstallation ends, click the [OK] button.
Macintosh
Quit FinePixViewer. Then drag the installed
FinePixViewer folder to the Trash and select “Empty
Trash” in the “Finder” menu.
D The “Add/Remove Programs Properties” window
appears. Select the software to be uninstalled
(FinePixViewer or the driver) and then click the [Add/
Remove] button.
To remove FinePixViewer
52
To remove the driver
software
110
52
System Expansion Option
By using FinePix F650 together with other optional FUJIFILM products, your system can be expanded to fill a wide range of
uses.
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
Z Audio/Visual
Z Image
output
TV monitor
(commercially available)
input/output to the PC
Personal Computer
(commercially available)
USB
Audio/Visual
output
Image Memory Card
Reader DPC-R1
(USB)
Z Printing
USB
xD-Picture
Card
PC Card Adapter DPC-AD
(PC card slot)
PictBridge-compatible printer
for
xD-P
icture
Card
(CF card slot)
Appendices
CompactFlash™
Card Adapter DPC-CF
DPC-C
F
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
Printer
(commercially available)
111
Accessories Guide
Visit the FUJIFILM web site for the latest information on camera accessories.
http://home.fujifilm.com/products/digital/index.html
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
• xD-Picture Card
Use the following xD-Picture Cards:
16MB/32MB/64MB/128MB/256MB/512MB/1GB
There are two types of xD-Picture Card: standard type and Type M (containing “M” in the model
number, such as DPC-M1GB).
FinePix F650 is compatible with Type M, however they may no be compatible depending on the device
used (Image Memory Card Reader, etc.).
• Battery Charger BC-65S
Quickly charges the rechargeable battery. The BC-65S reduces charging time to approx. 95 minutes (for
the NP-40). Use the Battery adapter when the NP-40 is being charged. The battery adapter is supplied
with the BC-65S.
• Rechargeable Battery NP-40 (750 mAh)
A Lithium-ion slimline rechargeable battery.
• AC Power Adapter AC-5VX
Use the AC-5VX when taking pictures or play back images for long periods or when FinePix
F650 is connected to a PC.
* The shape of the AC power adapter, the plug, and power outlet depend on the country.
• Soft Case SC-FXA03
This is a special case made of nylon that protects the camera against soil, dust, and minor impacts when it is being carried.
112
• Image Memory Card Reader DPC-R1
The DPC-R1 provides a quick and easy way to transfer images back and forth between your PC and an
image memory card (xD-Picture Card and SmartMedia). The DPC-R1 uses the USB interface for highspeed file transfer.
-Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 4 MB to 128 MB.
• PC Card Adapter DPC-AD
The PC Card Adapter allows the xD-Picture Card and SmartMedia to be used as a PC Card Standard
ATA-compliant (PCMCIA 2.1) PC card (Type u).
-Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 2 MB to 128 MB.
• CompactFlash™ Card Adapter DPC-CF
Loading an xD-Picture Card into this adapter allows you to use the card as a CompactFlash card (Type
s).
DPCCF
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
for
xD-P
ictur
e Card
Appendices
113
Using Your Camera Correctly
Read this information and the “Safety Notes” (➝p.144), to
make sure you use your camera correctly.
Z Places to Avoid
Do not store or use the camera in the following types of
locations:
• In the rain or in very humid, dirty, or dusty places
• In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer
• Extremely cold places
• Places with strong vibration
• Places with smoke or steam
• Places subject to strong magnetic fields (such as near
motors, transformers, or magnets)
• In contact with chemicals such as pesticides
• Next to rubber or vinyl products
Z Damaged by Water or Sand
FinePix F650 can be damaged on the inside and outside
by water and sand. When you are at the beach or close to
water, make sure that the camera is not damaged by
water or sand. Take care not to place the camera on a wet
surface.
Z Damaged by Condensation
If the camera is carried from a cold location into a warm
place, water droplets (condensation) may form on the
inside of the camera or on the lens. When this occurs, turn
the camera off and wait an hour before using the camera.
Condensation may also form on the xD-Picture Card. In
this event, remove the xD-Picture Card and wait a short
time.
114
Z When the Camera is Not Used or is stored Periods
of Time
If you do not intend to use the camera for a long period of
time, remove the battery and the xD-Picture Card.
Z Cleaning Your Camera
• Use a blower brush to remove any dust on the lens or
LCD monitor, and then gently wipe the camera with a
soft, dry cloth. If any soil remains, apply a small amount
of lens cleaning liquid to a piece of FUJIFILM lens
cleaning paper and wipe gently.
• Do not scratch hard objects against the lens or LCD
monitor.
• Clean the body of the camera with a soft, dry cloth. Do
not use volatile substances or cleaning products these
items can cause damage.
Z Using the Camera When Traveling
When traveling overseas, do not place your camera in the
check-in baggage. Baggage can be subjected to violent
shocks, and the camera may be damaged inside or
outside.
Power Supply and Battery
Notes on the Battery (NP-40N)
This camera uses the Rechargeable Lithium-ion Battery
NP-40N. Note the points below when using the
rechargeable battery. Take particular care to read the
Safety Notes to make sure that you use the battery
correctly.
* When shipped, the NP40N is not fully charged.
Always charge the NP40N before using it.
Battery
• When carrying the NPSoft case (NP-40N)
40N, install it in a digital
camera or keep it in the
soft case.
• When storing the NP-40N, place it inside the special soft
case provided.
Z Battery Life
At normal temperatures, the NP-40N can be used at least
300 times.
If the time for which the NP-40N provides power shortens
markedly, this indicates that the NP-40N has reached the
end of its effective life. If this happens, purchase NP-40
and replace it.
Continued Q
Appendices
Z Battery Features
• The NP-40N gradually loses its charge even when not
used. Charge a NP-40N just before taking pictures (in
the last day or two).
• To maximize the life of the NP-40N, turn the camera off
as quickly as possible when it is not being used.
• The number of available frames will be lower in cold
locations or at low temperatures. Take along a spare
fully charged NP-40.
You can also increase the amount of power produced
by putting the NP-40N in your pocket or another warm
place to heat it and then loading it into the camera just
before you take a picture.
If you are using a heating pad, take care not to place the
NP-40N directly against the pad. The camera may not
operate if you use a depleted NP-40N in cold conditions.
Z Charging the Battery
• You can charge the battery using the battery charger
(included).
• The NP-40N can be charged at ambient temperatures
between 0°C and +40°C (+32°F and +104°F). At an
ambient temperature of +23°C (+73°F), it takes about
90 minutes to charge a fully depleted NP-40N battery.
• You should charge the NP-40N at an ambient
temperature between +10°C and +35°C (+50°F and
+95°F). If you charge the NP-40N at a temperature
outside this range, charging takes longer because the
performance of the NP-40N is impaired.
• You cannot charge the NP-40N at temperatures of
0°C (+32°F) or below.
• The NP-40N does not need to be fully discharged or
exhausted flat before being charged.
• The NP-40N may feel warm after it has been charged or
immediately after being used. This is perfectly normal.
• Do not recharge a fully charged NP-40N.
115
Power Supply and Battery
Notes on storage
The Rechargeable Lithium-ion Battery NP-40N is both
compact and capable of storing large quantities of power.
However, if it is stored for long periods while charged, the
performance of the battery can be impaired.
• If the battery will not be used for some time, run the
battery out before storing it.
• If you do not intend to use the camera for a long period
of time, remove the battery from the camera.
• Place the battery pack inside the soft case and store in
a cool place.
* The battery should be stored in a dry location with an
ambient temperature between +15°C and +25°C (+59°F
and +77°F).
* Do not leave the battery in hot or extremely cold places.
Z Handling the Battery
To avoid injury or damage, observe the following:
• Do not carry or store battery with metal objects such as
necklaces or hairpins.
• Do not heat the battery or throw it into a fire.
• Do not attempt to take apart or change the battery.
• Do not recharge the battery with chargers other those
specified.
• Dispose of used battery promptly.
To avoid damaging the battery or shortening its life,
observe the following:
• Do not drop the battery or otherwise subject it to strong
impacts.
• Do not expose the battery to water.
116
To make sure that you obtain optimum battery
performance, observe the following:
• Always keep the battery terminals clean.
• Do not store battery in warm or humid places. Storing
the battery for long periods in a hot location can shorten
the battery life.
If you use the battery for a long period, the camera
body and the battery itself will become warm. This is
normal. Use the AC power adapter supplied with the
camera if you are taking pictures or viewing images
for a long period of time.
Z Specifications of the included NP-40N
Nominal voltage
DC 3.6V
Nominal capacity
730 mAh
Operating
0°C to +40°C (+32°F to +104°F)
temperature
Dimensions
35.3 mm × 40.0 mm × 5.85 mm
(1.39 in. × 1.6 in. × 0.2 in.)
(W × H × D)
Mass (Weight)
Approx. 18 g (0.6 oz.)
Notes on Using the Battery Charger
Z Battery Charger BC-40 Specifications
Rated input
100-240 V AC, 50/60 Hz
Input capacity
100-240 V -0.1 A
Rated output
4.2 V DC, 630 mA
Applicable
Rechargeable Battery
batteries
NP-40N/NP-40
Charging time
Approx. 90 minutes
Dimensions
88.0 mm × 46.0 mm × 27.3 mm
(3.5 in. × 1.8 in. × 1.1 in.)
(L × W × D)
Mass (Weight)
Approx. 60 g (2.1 oz.)
(excluding batteries)
Operating
0°C to + 40°C
temperatures
(+ 32°F to + 104°F)
Continued Q
Appendices
Use with the following power supply cord set:
Cord: UL Listed, Type SPT-2, No.18 AWG, rated 300V,
10A, minimum 6 ft (1.8m), maximum 10 ft (3m) long.
One end terminates in a molded-on, parallel-blade, (nonpolarized) attachment plug with a 7A, 125V (NEMA 115P) configuration.
• The battery and battery charger themselves will
become warm due to the power stored inside them. This
is normal and does not indicate a fault. Wherever
possible, use the battery charger in a well-ventilated
location.
• There may be vibration noises from inside the battery
charger during use. This is normal and does not indicate
a fault.
• Do not use the battery charger to charge batteries other
than rechargeable battery NP-40N/NP-40.
• The battery charger could cause interference if placed
close to a radio during charging. In this event, move the
radio and charger further apart.
• Do not leave the battery charger in the following types
of locations:
• Extremely humidity or high temperatures, such as
close to a heating appliance or in direct sunlight
• Places with strong vibration
• In very dusty places
• The battery charger accepts input voltages of 100-240
V AC at 50 or 60 Hz and can be used all over the world.
However, the shape of the plug and socket-outlet
depends on the country of use. Consult your travel
agent for details.
117
Power Supply and Battery
AC Power Adapter
Always use the AC Power Adapter AC-5VX (sold
separately) with the camera.
The use of an AC Power adapter other than AC-5VX (sold
separately) can be damaged to your digital camera.
• Use the AC power adapter for indoor use only.
• Plug the connection cord plug securely into the DC input
terminal of the FUJIFILM Digital camera.
• Turn off the FUJIFILM Digital camera before
disconnecting the cord from the FUJIFILM Digital
camera’s DC input terminal. To disconnect, pull out the
plug gently. Do not pull on the cord.
• Do not use the AC power adapter with any device other
than your camera.
• During use, the AC power adapter will become hot to
the touch. This is normal.
• Do not take apart the AC power adapter. Doing so could
be dangerous.
• Do not use the AC power adapter in a hot and humid
place.
• Do not subject the AC power adapter to strong shocks.
• The AC power adapter may emit a humming. This is
normal.
• If used near a radio, the AC power adapter may cause
static. If this happens, move the camera away from the
radio.
118
Notes on the xD-Picture Card™ and the Internal Memory
Z Image Memory Card
• This Image Memory Card is a new image recording
media (xD-Picture Card) developed for digital
cameras. The Image Memory Card consists of a
semiconductor memory (NAND-type flash memory) to
record digital image data.
The recording process is electrically performed and
enables erasure of existing image data as well as rerecording of new image data.
• When using a new Memory Card, or a Memory Card
that has been formatted by a PC, be sure to format the
card with your digital camera before using it.
Z Internal Memory
• Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
MO disk, CD-R, CD-RW, hard disk, etc.).
• Data stored in the camera’s internal memory cannot be
guaranteed in the event that the camera is submitted for
repairs.
• When the camera is repaired, any data stored in the
camera’s internal memory is subject to checking by the
repairer.
Z Handling xD-Picture Card
• When storing xD-Picture Cards, make sure that they
are kept out of the reach of children. An xD-Picture
Card could be swallowed cause suffocation. If a child
swallows an xD-Picture Card, seek medical attention
or call emergency number right away.
• When inserting the xD-Picture Card into the camera,
hold the xD-Picture Card straight as you push it in.
• Do not expose an xD-Picture Card to shock. Do not
apply pressure, and avoid bending.
• Do not use or store xD-Picture Card in hot and humid
places.
• Clean the xD-Picture Card with a soft dry piece of cloth
when dirty.
• When carrying or storing an xD-Picture Card, keep it in
the special protective case.
• The xD-Picture Card will work well for long time, but will
sooner or later lose its ability to store and play back
images or movies. If this happens replace it with a new
xD-Picture Card.
• Never remove the xD-Picture Card or turn the camera
off during data recording or erasing (xD-Picture Card
formatting) as this could be damaged to the xD-Picture
Card.
• The use of xD-Picture Cards is recommended with
FinePix F650.
The recording quality cannot be guaranteed when xDPicture Cards other than those manufactured by
FUJIFILM are used.
Appendices
Z Protecting Your Data
• Images and movies may be lost or destroyed in the
following situations. Please note that FUJIFILM
assumes no responsibility for data that is lost or
destroyed.
1.Removal of the memory card or turning the power off
while the memory card or internal memory is being
accessed (i.e., during record, erase, initialization, and
playback operations).
2.Improper handling and use of the memory card or
internal memory by the user or third party.
MEMO
Save your important data to another media (i.e., MO disk,
CD-R, CD-RW, hard disk, etc.).
Continued Q
119
Notes on the xD-Picture Card™ and the Internal Memory
• The xD-Picture Card may feel warm when it is removed
from the camera after taking pictures. This is normal.
• Do not put labels on the xD-Picture Card. Peeling
labels can cause the camera not to work properly.
Z Specifications
Type
Memory type
Conditions for use
MEMO
There are two types of xD-Picture Card: standard type
and Type M (containing “M” in the model number, such as
DPC-M1GB).
FinePix F650 is compatible with Type M, however they
may not be compatible depending on the device used
(Image Memory Card Reader, etc.).
Z Using xD-Picture Card or Internal Memory with a
PC
• When taking pictures using an xD-Picture Card or
internal memory that has been used on a PC, reformat
the xD-Picture Card or internal memory using your
camera for best quality.
• When formatting an xD-Picture Card or internal
memory, a directory (folder) is created. Image data is
then recorded in this directory.
• Do not change or delete the directory (folder) or file
names on the xD-Picture Card or internal memory
because this will make it impossible to use the xDPicture Card or internal memory in your camera.
• Always use the camera to erase image data on an xDPicture Card or internal memory.
• To edit image data, copy or transfer the image data to
the PC and edit the copied or transferred data.
120
Dimensions
Image memory card for digital
cameras (xD-Picture Card)
NAND-type flash memory
Temperature:
0°C to +40°C (+32°F to +104°F)
Humidity:
80% max. (no condensation)
25 mm × 20 mm × 2.2 mm
(0.98 in. × 0.79 in. × 0.09 in.)
(W × H × D)
Warning Displays
The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed
(Lit red)
V (Blinking red)
|
Explanation
There is a strong likelihood of camera shake
because the shutter speed is slow.
Use flash photography. A tripod may be
recommended, depending on the scene and mode.
The AF (autofocus) cannot work effectively.
• If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
• Use AF lock to take the picture (➝p.30).
• Select Macro mode when taking close-up shots.
The camera cannot shoot the picture at the correct
brightness due to too bright or dark shooting
condition.
The picture can be taken, but the correct brightness
(exposure) will not be obtained.
FOCUS ERROR
Camera malfunction or fault.
• Turn the camera on again, taking care not to touch
the lens.
• Turn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
xD-Picture Card is not inserted when transferring
images.
Insert an xD-Picture Card.
• The xD-Picture Card or internal memory is not
formatted.
• The xD-Picture Card contact area is soiled.
• Format the xD-Picture Card or internal memory
on the camera (➝p.90).
• Wipe the contact area on the xD-Picture Card
with a soft, dry cloth. It may be necessary to format
the xD-Picture Card (➝p.90). If the message still
appears, replace the xD-Picture Card.
• Camera fault.
• Contact your FUJIFILM dealer.
• The xD-Picture Card contact area is soiled.
• The xD-Picture Card format is incorrect.
• Wipe the contact area on the xD-Picture Card
with a soft, dry cloth. It may be necessary to format
the xD-Picture Card (➝p.90). If the message still
appears, replace the xD-Picture Card.
• Camera fault.
• The xD-Picture Card is damaged.
• Contact your FUJIFILM dealer.
ZOOM ERROR
NO CARD
CARD NOT INITIALIZED
CARD ERROR
Continued Q
Appendices
Charge the battery or load fully charged battery.
{
Aperture/
Shutter speed display
(Lit red)
Remedy
The battery is low or completely out of charge.
121
Warning Displays
Warning Displayed
\ CARD FULL
Explanation
The internal memory or xD-Picture Card is full.
Y CARD FULL
WRITE ERROR
r BUSY
• The data could not be recorded due to an xD• Re-insert the xD-Picture Card or turn the camera
Picture Card error or a connection error between
off and then on again. If the message still appears,
the xD-Picture Card and camera.
contact your FUJIFILM dealer.
• The image cannot be recorded as it is too large to • Use a new xD-Picture Card.
fit in the available space on the xD-Picture Card.
The timing for recording was incorrect because the
xD-Picture Card was formatted on a PC.
The frame number has reached 999-9999.
FRAME NO. FULL
• The played back file was not recorded correctly.
• The xD-Picture Card contact area is soiled.
READ ERROR
Remedy
Erase some images in internal memory or xDPicture Card (➝p.37, 68), or use an xD-Picture
Card that has ample free space.
Use an xD-Picture Card that was formatted on the
camera.
A Insert a formatted xD-Picture Card into the
camera.
B Set RENEW as the FRAME NO. setting in the
U SET-UP menu (➝p.87).
C Start taking pictures (The frame number starts
from “100-0001”).
D Set CONT. as the FRAME NO. setting in the U
SET-UP menu.
• This file cannot be played back.
• Wipe the contact area on the xD-Picture Card
with a soft, dry cloth. It may be necessary to format
the xD-Picture Card (➝p.90). If the message still
appears, replace the xD-Picture Card.
• Camera fault.
• Contact your FUJIFILM dealer.
• An attempt was made to play back the image or the • The movie and image cannot be played back.
movie that was not recorded on this camera.
TOO MANY FRAMES
122
An attempt was made to show 5,000 or more image No more than 4,999 images can be shown by date
by date sorting.
sorting.
Warning Displayed
Explanation
• An attempt was made to erase a protected file.
PROTECTED FRAME
# ERROR
\ NO IMAGE
Y NO IMAGE
` CAN NOT TRIM
CAN NOT TRIM
DPOF FILE ERROR
CAN NOT SET DPOF
• An attempt was made to add a voice memo to
protected file.
• An attempt was made to rotate a protected file.
Remedy
• Protected files cannot be erased. Remove the
protection (➝p.70).
• Protected files cannot be added to voice memos.
Remove the protection (➝p.70).
• Protected files cannot be rotated. Remove the
protection (➝p.70).
• The voice memo file is faulty.
• Camera fault.
• The voice memo cannot be played back.
• Contact your FUJIFILM dealer.
An attempt was made to transfer images from the
xD-Picture Card or internal memory that memory
was empty.
It is impossible to copy.
An attempt was made to trim a 0.3M image.
The image cannot be trimmed.
• An attempt was made to trim an image shot using The image cannot be trimmed.
a camera other than FinePix F650.
• The image is damaged.
Prints were specified for 1000 or more frames in the The maximum number of frames for which prints can
DPOF frame settings.
be specified on the same xD-Picture Card is 999.
Copy the images for which you want to order prints
onto another xD-Picture Card and then specify the
DPOF settings.
An attempt was made to specify DPOF settings for
an image that is not supported by DPOF.
DPOF printing cannot be used with this image
format.
r CAN NOT SET DPOF
An attempt was made to rotate a movie or an image These images cannot be rotated by image formats.
shot using a camera other than FinePix F650.
r CAN NOT ROTATE
COMMUNICATION
ERROR
The camera is not connected to a PC or printer.
Appendices
CAN NOT ROTATE
• Check that the USB cable (included) is connected
correctly.
• Check that your printer is turned on.
Continued Q
123
Warning Displays
Warning Displayed
Explanation
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Displayed for PictBridge.
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
Displayed for PictBridge.
• Refer to the user manual for the printer being used
and check whether the printer supports the JFIFJPEG or Exif-JPEG image format. If not, the printer
cannot print the images.
• Movie images cannot be printed.
• Was the image data photographed using FinePix
F650?
You may not be able to print some images
photographed on other cameras.
PRINTER ERROR
PRINTER ERROR
RESUME?
CANNOT BE PRINTED
124
Remedy
Displayed for PictBridge.
Troubleshooting
Z Getting ready
Matters
Problems
Nothing happens
when pressing
POWER.
Possible causes
Solutions
Page
The battery has run out.
Charge the battery or load fully charged
battery.
15,
17,
115
The battery is loaded backward.
Load the battery in the corrected direction.
17
The battery cover is not closed securely.
Close the battery cover securely.
18
The camera and AC power adapter are not Connect the camera and AC power
connected correctly.
adapter correctly.
Battery and power
supply
Battery runs out
quickly.
Power cuts out
during operation.
118
Camera is used in extremely cold
conditions.
Put the battery in your pocket or another
warm place to heat it and then load it into
the camera just before you take a picture.
18,
115
The terminals are soiled.
Wipe the battery terminals with a clean,
dry cloth.
15,
115
Same battery has been used for a long
period.
The battery can no longer be recharged.
Load a new battery.
17,
18,
115
The battery has run out.
Charge the battery or load fully charged
battery.
15,
17,
115
The camera and AC power adapter are not Connect the camera and AC power
connected correctly.
adapter correctly.
118
Continued Q
Troubleshooting
125
Troubleshooting
Matters
Problems
Possible causes
Solutions
Page
The battery is loaded backward.
Load the battery in the correct direction.
16
The battery charger and connection cord
are not connected correctly.
Connect the battery charger and
connection cord correctly.
16
Take the battery out briefly and wipe the
battery terminals with a clean, dry cloth
before reloading it.
115
Load a new battery. If the battery still fails
to charge, contact your FUJIFILM dealer.
–
Solutions
Page
Charging a battery Charging does not The battery terminals are soiled.
begin.
The battery can no longer be recharged.
Z Setting menu etc.
Matters
LCD monitor
display
126
Problems
Screens are not
displayed in
English.
Possible causes
A language other than English is selected Select ENGLISH.
in the
setting in the SET-UP
menu.
25
Z Shooting
Matters
Basic operations
Problems
No photograph is
taken when
pressing the
shutter button.
The LCD monitor
darkens after
taking a picture.
Focusing
Camera has
difficulty in
focusing on the
subject.
Possible causes
Solutions
Page
The xD-Picture Card or internal memory
is full.
Insert a new xD-Picture Card or erase
some unnecessary frames.
19,
37, 68
The xD-Picture Card or internal memory
is not formatted.
Format the xD-Picture Card or internal
memory on the camera.
84, 90
The xD-Picture Card contact area is
soiled.
Wipe the xD-Picture Card contact area
with a soft, dry cloth.
119
The xD-Picture Card is damaged.
Insert a new xD-Picture Card.
19
The battery has run out.
Charge the battery or load fully charged
battery.
15,
17,
115
You took pictures with flash.
The LCD monitor may darken for charging
flash. Wait a short time.
52
You took a close-up shot without selecting Select Macro mode.
Macro mode.
50
You photographed scenery with Macro
mode selected.
Cancel Macro mode.
50
You are shooting a subject that is not
suited to autofocusing (➝p.31).
Use AF/AE lock to take the picture.
30
Continued Q
Troubleshooting
127
Troubleshooting
Matters
Problems
Cannot use the
flash.
Flash
Possible causes
Solutions
52
The Shooting mode is set to ,,
.
40
,
, or Change the Shooting mode.
The battery has run out.
Charge the battery or load fully charged
battery.
15,
17,
115
Continuous shooting is selected.
Set continuous shooting to OFF.
62
The flash settings are restricted because
the camera settings are tailored to the
scene being shot. Change the Shooting
mode for a wider range of flash settings.
40
The flash settings The Shooting mode is set to anything other
are restricted and than H and s.
cannot be
selected.
The playback
image is dark
even though the
flash was used.
The subject is too far away.
Move to within the effective flash range
before taking the picture.
Your finger was covering the flash.
Hold the camera correctly.
26
The lens is dirty.
Clean the lens.
114
{ appeared when taking pictures.
Check the focus on the subject and take
pictures.
27,
30,
121
| appeared when taking pictures.
It may cause camera shake. Hold the
camera steadily.
28,
121
The image is
blurred.
Photographed images
The picture was taken with a slow shutter This is a characteristic of CCDs and does
There is speckling
speed (long exposure) in a highnot indicate a camera fault.
on the image.
temperature environment.
AC power adapter was connected or
disconnected during turning the camera
Photographed
Recording images images or movies on.
are not recorded.
128
Page
The shutter button was pressed while the Wait until the charging is completed before
flash was charging.
pressing the shutter button.
Connect or disconnect the AC power
adapter only when the camera is off.
Failing to turn the camera off first can
result in damage to the xD-Picture Card
or malfunctions during PC connection.
50, 52
–
118
Z Playing back
Matters
Problems
Possible causes
The camera volume is set too low.
Playing back
movie / voice
memo
The camera does
The microphone was blocked during
not emit any
shooting/recording.
sound.
There is something covering the speaker
during playback.
Erasing FRAME
Some frames may be protected.
does not erase the
frame.
Erasing
Frame No.
Solutions
Page
Adjust the volume.
76,
82, 89
Take care not to block the microphone
during shooting/recording.
13,
74, 79
Make sure that the speaker is uncovered.
Unprotect frames using the camera on
which the protection was first applied.
70
Erasing ALL
FRAMES does
not erase all the
frames.
CONT. in the
frame number
setting does not
function.
13, 75
You opened the battery cover without
Always turn the camera off when replacing
turning the camera off when replacing the the battery or xD-Picture Card. Opening
battery or xD-Picture Card.
the battery cover without turning the
camera off may cause the frame number
memory to not function.
21
Continued Q
Troubleshooting
129
Troubleshooting
Z Connecting
Matters
Problems
Possible causes
The camera is not connected to the TV
correctly.
Connecting to TV
The included A/V cable was connected
There is no image
during movie playback.
or sound on the
TV.
“TV” is selected as the TV input.
The video output setting is incorrect.
The TV image is
black and white.
130
Cannot print with
PictBridge.
After the movie playback mode is stopped,
connect the camera and TV correctly.
Set the TV input to “VIDEO”.
Change the setting to NTSC or PAL.
Page
93
–
–
83, 85
The TV volume is turned down.
Adjust the volume.
The video output setting is incorrect.
Change the setting to NTSC or PAL.
The USB cable (included) is not correctly
connected to the PC or camera.
Set up the camera, and connect the USB
cable (included) correctly.
106
< PICTBRIDGE is selected in
USB MODE in the SET-UP menu.
Perform the below steps to cancel the
setting before selecting @ DSC.
• Windows
A The “New Hardware Found” wizard or
“Scanner and Camera” wizard appears.
If the wizard does not appear, proceed
to step C.
B Click the [Cancel] button.
C Disconnect the camera from the PC.
• Macintosh
A The window for locating the driver appears.
If the window does not appear, proceed
to step C.
B Click the [Cancel] button.
C Disconnect the camera from the Macintosh.
105
PC does not
Connecting to PC recognize the
camera.
Connecting to
printer
Solutions
Connect the camera and TV correctly.
@ DSC is selected in
the SET-UP menu.
USB MODE in Select < PICTBRIDGE.
• The USB cable (included) is not correctly • Set up the camera, and connect the USB
connected to the printer or camera.
cable (included) correctly.
• The printer is not turned on.
• Turn the printer on.
–
83, 85
95
95
Z Others
Matters
Problems
Possible causes
Camera malfunction may be caused
temporarily.
Camera operation
etc.
Nothing happens
when pressing the
buttons on the
The battery has run out.
camera.
The camera no
longer works
correctly.
Camera malfunction may be caused
temporarily.
Solutions
Page
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again.
17,
118
Charge the battery or load fully charged
battery.
Briefly remove the battery or disconnect
the AC power adapter. Then reload the
battery or reconnect the AC power adapter
and try again. If you think the camera is
faulty, contact your FUJIFILM dealer.
15,
17,
115
17,
118
Troubleshooting
131
Specifications
System
Model
Digital camera FinePix F650
Effective pixels
6.0 million pixels
CCD
1/2.5-inch square pixel CCD
Storage media
Internal memory (approx. 26 MB)/xD-Picture Card (16/32/64/128/256/512 MB/1 GB)
File format
Still image: DCF-compliant
Compressed: Exif ver.2.2 JPEG, DPOF-compatible
*Design rule for Camera File System compliant DPOF compatible
Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound
Number of recorded pixels Still image: 2816 × 2112 pixels/2816 × 1880 pixels/2048 × 1536 pixels/
1600 × 1200 pixels/640 × 480 pixels (5/%/3/2/`)
132
File size
See the table on the p.135
Lens
Fujinon 5× optical zoom lens
F2.8-F4.7
Focal length
f=5.8 mm-29 mm
(Equivalent to approx. 35 mm-175 mm on a 35 mm camera)
Digital zoom
Approx. 4.4× (5× optical zoom lens is used together: Max. zoom scale: approx. 22×)
Aperture (Wide-angle)
F2.8 to F8 (Up to 10 steps)
Focal range
Normal: approx. 60 cm (2.0 ft.) to infinity
Macro: approx. 12 cm (4.7 in.) to 80 cm (2.6 ft.)
Super Macro: approx. 3 cm (1.2 in.) to 20 cm (7.9 in.)
Sensitivity
AUTO/Equivalent to ISO 64/100/200/400
Photometry
TTL 256-zones metering
Exposure control
Program AE/Aperture priority AE/Shutter priority AE
Scene position
H (PORTRAIT), , (LANDSCAPE), . (SPORT), 8 (NIGHT),
(FIREWORKS),
(SNOW),
(BEACH),
(MUSEUM),
(PARTY),
(FLOWER),
(TEXT)
(SUNSET),
System
Exposure compensation
–2 EV to +2 EV in 1/3 EV-step increments (s, <, M)
Shutter speed
2 sec. to 1/2000 sec. (depend on Exposure mode)
Continuous shooting
Number of recorded frames:5F 6 frames/5N 12 frames/%13 frames/3 22 frames/2 29 frames/
` 140 frames (Max. 1.7 frames/sec.)
Focus
Mode: Single-AF
AF system: TTL contrast-type
AF frame selection: AF (CENTER)
White balance
Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight), Fluorescent (Warm White),
Fluorescent (Cool White), Incandescent)
Self-timer
Approx. 2 sec./10 sec.
Flash type
Auto flash
Effective range: (S: AUTO): Wide-angle: approx. 60 cm-4.6 m (2.0 ft.-15.1 ft.)
Telephoto: approx. 60 cm-2.7 m (2.0 ft.-8.9 ft.)
Macro: approx. 30 cm-80 cm (1.0 ft.-2.6 ft.)
Flash mode
Auto, Red-eye Reduction, Forced Flash, Suppressed Flash, Slow Synchro, Red-eye Reduction + Slow Synchro
LCD monitor
3.0 inches, Aspect ratio: 4:3; 230,000 pixels low-temperature polysilicon TFT, Approx. 100% coverage
Movie
640 × 480 pixels/320 × 240 pixels (%/$)
(30 frames per second with monaural sound)
A series of continuous image can be recorded depending on the available space on an xD-Picture Card
or internal memory. Zoom cannot be used during movie recording.
Photography functions
Best framing, Frame No. memory
Playback functions
Trimming, Automatic playback, Multi-frame playback, Sorting by date, Image rotate, Voice memo
Other functions
PictBridge, Exif print, Language (English, Francais, Deutsch, Español, Italiano,
difference, FinePix photo mode(p-mode)
,
), Time
Continued Q
133
Specifications
Input/Output Terminal
A/V OUT (Audio/Visual
output)
NTSC/PAL-type (with monaural sound)
Digital input/output
USB 2.0
DC input socket
AC Power Adapter AC-5VX (sold separately)
Power Supply and Others
Power supply
Guide to the number of
available frames for battery
operation
Use one of the following
• Rechargeable Battery NP-40N (included)/NP-40 (sold separately)
• AC Power Adapter AC-5VX (sold separately)
Battery Type
NP-40N
Number of frames
Approx. 150 frames
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using a battery, use the battery supplied with the camera. The storage media should be xD-Picture
Card.
Pictures should be taken at a temperature of +23°C (+73°F), with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original position
every 30 seconds, the flash used at full power every second shot and the camera turned off and then on
again once every 10 shots.
• Note: Because the number of available shots varies depending on the level of charge in the battery, the
figures shown here for the number of available shots using the battery is not guaranteed.
The number of available shots will also decline at low temperatures.
Camera dimensions (W/H/D) 104.7 mm × 60.6 mm × 30.8 mm/4.1 in. × 2.4 in. × 1.2 in. (not including accessories and attachments)
Camera mass (weight)
134
Approx. 170 g/6.0 oz. (not including accessories, battery and xD-Picture Card)
Weight for photography
Approx. 190 g/6.7 oz. (including battery and xD-Picture Card)
Operating Conditions
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Z Standard number of available frames/recording time per xD-Picture Card and internal memory
The number of available frames, recording time or file size varies slightly depending on the subjects photographed. Note also
that the divergence between standard number of frames and the actual number of frames is greater for xD-Picture Cards with
higher capacities.
Quality setting
Number of recorded
pixels
Image data size
Internal memory
(approx. 26 MB)
5F
5N
2816 × 2112
2.9 MB
%
3
2
2816 × 1880 2048 × 1536 1600 × 1200
1.4 MB
1.3 MB
780 KB
630 KB
`
%
(30 fps)
$
(30 fps)
640 × 480
640 × 480
320 × 240
130 KB
–
–
9
19
21
35
45
219
30 sec.
48 sec.
16 MB
5
10
12
20
25
124
17 sec.
27 sec.
32 MB
10
21
24
40
51
249
34 sec.
55 sec.
64 MB
21
43
48
81
102
499
70 sec.
110 sec.
128 MB
43
86
97
163
204
999
140 sec.
221 sec.
256 MB
87
173
195
326
410
1999
280 sec.
7.4 min.
512 MB
174
347
389
652
819
3995
9.3 min.
14.7 min.
1 GB
349
695
780
1305
1640
7996
18.7 min.
29.6 min.
If you shoot using the xD-Picture Cards with model numbers containing “M” such as DPC- M1GB, movie recording time may be
reduced if you repeatedly record and erase (frame erase) image files. In such a case, erase all frames or format the xD-Picture Card
before use. Back up important frames (files) onto your PC or another media.
* These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this Owner’s Manual.
* The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright
points and anomalous colors (particularly around text) may appear on the monitor. These are normal display characteristics
and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.
* The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static electricity,
line noise, etc.).
* Due to the nature of the lens, the edges of images may appear distorted. This is normal.
135
Explanation of Terms
EV
A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the film
or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes, a
digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the EV decreases
by 1.
Frame rate (fps)
The frame rate refers to the number of images (frames) that are photographed or played back per second. For example, when
10 frames are continuously photographed in a 1-second interval, the frame rate is expressed as 10 fps.
For reference, TV images are displayed at 30 fps (NTSC).
JPEG
Joint Photographic Experts Group
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss of quality in
the decompressed (restored) image.
Motion JPEG
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file are recorded
in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
Smear
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light source, such as
the sun or reflected sunlight, in the photography screen.
WAVE
A standard format used on Windows systems for saving audio data. WAVE files have the “.WAV” file extension and the data
can be saved in either compressed or uncompressed format. Uncompressed recording is used on this camera.
WAVE files can be played back on a personal computer using the following software:
Windows: MediaPlayer
Macintosh: QuickTime Player
* QuickTime 3.0 or later
White Balance
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, devices
such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of the ambient light
around the subject. This adjustment is called matching the white balance.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.
136
FUJIFILM Digital Camera Worldwide Network
If you have technical questions or if you need repair service, ask the following local distributor.
Please present the warranty card and your purchase receipt when you ask for repairs. Refer to the warranty card for conditions of the warranty.
There is a case that repair and Technical support cannot be accepted for some models which your local distributor does not deal with.
These lists are subject to change without notice.
NORTH AMERICA
Canada
U.S.A.
Hawaii
Fuji Photo Film Canada Inc.
Technical support
Repair service
Fuji Photo Film USA
Technical support
Repair service
Fuji Photo Film Hawaii, Inc.
Technical support &
Repair service
CENTRAL & SOUTH AMERICA
Argentina
Imagen e informacion S.A.
Technical support &
Repair service
Bolivia
Reifschneider Bolivia Ltda.
Technical support &
Repair service
Brazil
Fuji Photo Film do Brasil Ltda.
Technical support &
Repair service
Chile
Reifschneider SA
Technical support &
Repair service
Colombia
Animex de Colombia Ltda.
Technical support &
Repair service
Ecuador
Espacri Cia Ltda
Technical support &
Repair service
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-866-818-FUJI (3854) http://www.fujihelp.ca
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-800-263-5018 FAX 1-905-755-2993 http://www.fujihelp.ca
1100 King George Post Rd., Edison, NJ 08837
TEL 800-800-3854 FAX 732-857-3487 digitalinfo@fujifilm.com
1100 King George Post Rd., Edison, NJ 08837
TEL 732-857-3000 FAX 732-857-3471 njcamerarepair@fujifilm.com
94-468 Akoki Street, Waipahu, HI. 96797
TEL 1-808-677-3854, ext. 209 FAX 1-808-677-1443
kurt_kmett@fujifilmhawaii.com
Fondo de la Legua 936 San Isidro Pcia. de Buenos Aires
TEL +54-11-4836-1000 FAX +54-11-4836-1144
servtec@imageneinformacion.com.ar
Calle H N.° 5 - Equipetrol Norte - Santa Cruz
TEL +591 33 44 1129 FAX +591 33 45 2919 gciagral@bibosi.scz.entelnet.bo
Av. Vereador José Diniz, 3400 - Campo Belo, Sào Paulo/SP
TEL 0800-12-8600 FAX +55 11 5091-4150 camarasdigitais@fujifilm.com.br
Av. El Conquistador del Monte 5024, Huechuraba, Santiago, Chile
TEL 02-4431500 FAX 02-4431596 ceciliacalvo@reifschneider.cl
Calle 44 N.° 13-43 Piso 2 Apartado 18001 - Bogotá
TEL +57 1 338-0299 FAX +57 1 288-2208 animex@etb.net.co
Bolivar 5-69 y Hermano Miguel
TEL 593-72-835526 FAX 593-72-833157
Continued Q
137
FUJIFILM Digital Camera Worldwide Network
Ecuador
Importaciones Espacri Cia. Ltda.
Technical support &
Repair service
Simón Bolivar 5-69 y Hno. Miguel - Cuenca
TEL +593 783 5526 FAX +593 783 3157 portiz@fujifilm.com.ec
Mexico
Fujifilm de Mexico, S.A. de C.V.
Technical support
Repair service
Av. Ejercito Nacional 351, Col. Granada 11520 Mexico, D.F.
TEL (52-55) 5263-5566 / 68 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Paraguay
Errece S.R.L.
Technical support &
Repair service
Peru
Procesos de Color S.A.
Technical support &
Repair service
Pablo Bermudez 111 Apartado 3794 - Esq. Arequipa - Lima 11
TEL +51 14 33 5563 FAX +51 14 33 7177 jalvarado@fujifilm.com.pe
Uruguay
Fotocamara S.R.L.
Technical support &
Repair service
Cuareim 1439, montevideo, Uruguay
TEL +598-2-9002004 FAX +598-2-9008430 fotocam@adinet.com.uy
Uruguay
Kiel S.A.
Technical support &
Repair service
Maldonado 1787 Montevideo- Uruguay
TEL (05982) 419 4542 FAX (05982) 412 0046 kiel@fujifilm.com.uy
Venezuela
C. Hellmund & Cia Sa
Technical support &
Repair service
Av. Ppal Diego Cisneros Caracas Venezuela Edf Oficentro
TEL 0212-2022300 FAX 0212-2399796 hellmund@hellmund.com
Fuji Film Oesterreich
Technical support &
Repair service
Traviatagasse/Pfarrgasse, 1230 Vienna, Austria
TEL 0043 1 6162606/51 or 52 FAX 0043 1 6162606/58
kamera.service@fujifilm.at
Belgium
Belgian Fuji Agency
Technical support &
Repair service
20, Avenue Lavoisier, Wavre, 1300, Belgium
TEL 3210242090 FAX 3210238562 info@fuji.be
Croatia
I&I d.o.o.
Technical support
Repair service
Hondlova 2, Zagreb, Croatia
TEL 38512319060 FAX 2310240 dsaravanja@fujifilm.hr
EUROPE
Austria
Cyprus
138
Av. Presidente Juarez 2007, Col. Tepetlacalco, 54090 Tlalnepantla, Edo. de
Mexico
TEL (52-55) 5263-5500 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Edificio Unitas 15 de Agosto 1035, Asunción
TEL +595 21 444256 FAX +595 21 444651 jmarbulo@fujifilm.com.py
PMS IMAGING LTD
Technical support &
Repair service
Hondlova 2, Zagreb, Croatia
TEL 38512316228 FAX 2310240 info@fujifilm.hr
11, Dighenis Akritas Avenue, P.O.BOX 22315, 1586 Nicosia
TEL 35722746746 FAX 35722438209 mariosashiotis@fujifilm.com.cy
Cyprus
Doros Neophytou
CAMERA REPAIRS
Technical support &
Repair service
28B, Agiou Demetriou, Acropoli, Nicosia
TEL 35722314719 FAX 35722515562 dorosn@logosnet.cy.net
Czech Republic
Fujifilm Cz., s.r.o.
Technical support
U nakladoveho nadrazi 2/1949, 130 00 Praha 3
TEL 00420 234 703 411 FAX 00420 234 703 489 fricman@fujifilm.cz
Czech Republic
AWH servis
Repair service
Milesovska 1, 130 00 Praha 3, Czech republic
TEL 00420 222 721 525 FAX 00420 222 720 122 awh@awh.cz
Denmark
Fujifilm Denmark A/S
Technical support &
Repair service
Stubbeled 2, 2950 Vedbæk Denmark
TEL 0045 45662244 FAX 0045 45662214 fujifilm@fujifilm.dk
Finland
Fuji Finland Oy
Technical support &
Repair service
Martinkyläntie 41, 01720 Vantaa, Finland
TEL +358 9 825951 FAX +358 9 870 3818 fuji@fuji.fi
France
FUJIFILM France
Technical support &
Repair service
2, Avenue Franklin, 78186 Saint-Quentin en Yvelines, France
FAX 33 1 01 30 58 58 65 direction.technique@fujifilm.fr
Germany
Fuji Photo Film (Europe) GmbH
Technical support &
Repair service
Greece
FUJIFILM HELLAS S.A.
Technical support &
Repair service
Heesenstr. 70, 40549 Düsseldorf
International call TEL +49 211 50890 FAX +49 211 5089668 service@fujifilm.de
National call* TEL 0180 5898980 FAX 0180 5898982
*12 Cent/Min aus dem deutschen Festnetz
1, Ihous & Ag. Anargiron str., 175 64 P.Phaliro, Athens, Greece
TEL 0030 210 9404100 FAX 0030 210 9404397 fujifilm@fujifilm.gr
Hungary
Fujifilm Hungary Ltd.
Technical support
Vaci ut 19. Budapest, 1134, Hungary
TEL 3612389410 FAX 3612389401 fujifilm@fujifilm.hu
Iceland
Icephoto (Ljosmyndavorur)
Technical support &
Repair service
Skipholt 31, 105 Reykjavik, Iceland
TEL 354 568 0450 FAX 354 568 0455 framkollun@fujifilm.is
Italy
FujiFilm Italia S.p.A.
Technical support
Repair service
Via Dell’Unione Europea, 4 - 20097 San Donato Milanese (MI), Italy
TEL 039-02895821 FAX 039-0289582912 info@fujifilm.it
Lithuania
Fujifilm Lithuania
Technical support &
Repair service
Fujifilm On Line - Call center
TEL 039-026695272 info@fujifilm.it
Gerosios Vilties str. 38, LT-03143 Vilnius, Lithuania
TEL 370-5-2130121 FAX 3705-5-2134066 info@fujifilm.lt
Continued Q
139
FUJIFILM Digital Camera Worldwide Network
Malta
Ciancio (1913) Co.Ltd.
Technical support &
Repair service
Fuji Tech Centre, Ciancio House, Cannon Road, Qormi, QRM05
TEL 0356-21-480500 FAX 0356-21-488328 info@fujifilm.com.mt
Netherlands
Fujifilm Nederland BV
Technical support
Repair service
Hoogstraat 39, 3011 PE, Rotterdam, The Netherlands
TEL 010-2812345 FAX 010-2812334 fuji@fujifilm.nl
Norway
Fujifilm Norge AS
Technical support
Repair service
Poland
Fujifilm Polska Distribution Sp. z
o.o.
Technical support
Repair service
Portugal
Fujifilm Portugal, Lda
Technical support
Repair service
Poland, Muszkieterow 15, 02-273 Warszawa
TEL +48-22-886-94-40 FAX +48-22-886-94-42 serwis@fujifilm.pl
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 226194213 finepix@fujifilm.pt
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 225194662 cameras@fujifilm.pt
112, Calea Dorobanti street, 4 flat, 1sector, Bucharest, Romania
TEL 4021-230-09-82 FAX 4021-230-09-82 cts_tirla@hotmail.com
Romania
CTS-Cardinal Top Systems Ltd
Technical support &
Repair service
Russia
ZAO “Fujifilm RU”
Technical support
Bld. 1, 10, Rozanova str., Moscow, 123007, Russia
TEL +7-095-956-9858 FAX +7-095-230-6217 info@fujifilm.ru
Repair service
18, Shelepikhinskaya Naberezhnaya str., Moscow, 123290, Russia
TEL +7-095-797-3434 FAX +7-095-797-3434
Pribylinska 2, 831 04 Bratislava, Slovakia
TEL 00421 2 44 888 077 FAX 00421 2 44 889 300 fujifilm@fujifilm.sk
Slovakia
Spain
140
Hoevenseweg 43, 4877 LA, Etten-Leur, The Netherlands
TEL 010-2812345 FAX 076-7502641 reparatie@fujifilm.nl
Lilleakerveien 10, 0283 Oslo, Norway
TEL 0047-22736000 FAX 0047-22736020 http://www.fujifilm.no/
mailto:post@fujifilm.no
Liaveien 1, 5132 Nyborg, Norway
TEL 0047-55393880 FAX 0047-55195201 http://www.camera.no/
mailto:service@camera.no
Poland Al..Jerozolimskie 178; 02-486 Warszawa
TEL +48-22-517-66-00 FAX +48-22-517-66-02 fujifilm@fujifilm.pl
Fujifilm Slovakia
Technical support
Repair service
Fujifilm España S.A.
Technical support
Repair service
FIS Tatracentrum, Hodzovo nam. 4 - Tatracentrum, 811 06 Bratislava, Slovakia
TEL 00421 2 54 647 347 fis.tatracentrum@stonline.sk
Aragón 180, 08011 Barcelona (España)
TEL 902012535 FAX 934515900 / 933230330 info@fujifilm.es
Aragón 180, 08011 Barcelona (España)
TEL 934511515 FAX 934515900 / 933230330 tallersat@fujifilm.es
Sweden
Fujifilm Sverige AB
Technical support
Repair service
Switzerland /
Lichtenstein
Fujifilm (Switzerland) AG
Technical support &
Repair service
Turkey
Fujifilm Turkiye Sinfo A.S.
Technical support
Repair service
U.K.
Ukraine
MIDDLE EAST
Iran
Israel
Fuji Photo Film (UK) Ltd.
Technical support
Repair service
Image Ukraine CJSC
Technical support &
Repair service
Sveavägen 167 104 35 Stockholm
TEL 46 8 506 141 70 FAX 46 8 506 142 09 kamera@fujifilm.se
Sveavägen 167 104 35 Stockholm
TEL 46 8 506 513 54 FAX 46 8 506513 54 kameraverkstaden@fujifilm.se
Niederhaslistrasse 12, 8157 Dietlikon, Switzerland
TEL +41 44 855 5154 FAX +41 44 855 5329 RepairCenter@fujifilm.ch
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5009 csarp@fujifilm.com.tr
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5010 servis@fujifilm.com.tr
St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 424 5383 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 421 8388 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
12, Kontraktova ploshcha, Kyiv 04070, Ukraine
TEL +380-44-4909075 FAX +380-44-4909076 d@fujifilm.ua
Tehran Fuka Co.
Technical support &
Repair service
229,“Fuji” Bldg., Mirdamad Blvd., Tehran 19189, Iran
TEL (+98-21)2254810-19 FAX (+98-21)2221002 fuka@neda.net
Shimone Group Ltd.
Technical support
Repair service
Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 digital@fujifilm.co.il
Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 FAX 972 3 9250699 khaim@shimone.com
Al- Abdali, Amman / Jordan
TEL 009626-4646387 FAX 009626-4647542 gstores@go.com.jo
Jordan
Grand Stores
Technical support &
Repair service
Qatar
Techno Blue
Technical support
Blue Salon Bldg, 3rd Floor, Suhaim bin Hamad st, Al- Saad, Doha
TEL 00974 44 66 175 FAX 00974 44 79 053 prabu@techno-blue.com
Saudi Arabia
Emam Distribution Co. Ltd.
Technical support
P.O. Box 1716, Jeddah 21441, Saudi Arabia
TEL 96626978756 FAX 96626917036 service@fujifilm.com.sa
Continued Q
141
FUJIFILM Digital Camera Worldwide Network
Syria
Al-Shahbandar P.O. Box:31180 Damascus SYRIA
TEL + 963 11 2218049 FAX + 963 11 44673456 f.t.c@Net.SY
Al-cheikh Taha P.O. Box: 6171 Aleppo SYRIA
TEL + 963 21 4641903 FAX + 963 21 4641907 filmtradin@Net.SY
P. O. Box 2144, Saleh Bin Lahej Building, Al Garhoud, Deira, Dubai
TEL + 971-4-2823700 FAX + 971-4-2828382 photography@grandstores.ae
U.A.E.
Grand Stores
Technical support &
Repair service
Yemen
Al-Haidary Trading
Technical support
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503980 FAX 00967-1-503983
Foto Express Egypt
Technical support &
Repair service
426 Pyramids St., Giza, Egypt
TEL (202) 7762062 FAX (202) 7760169 fotoegypt@access.com.eg
Fuji Kenya Ltd
Repair service
P.O.Box 41669-00100, Fuji Plaza, Chiromo Road, Nairobi, Kenya.
TEL (254-20)4446265-8 FAX (254-20)4448515 / 7 info@fujifilm.co.ke
FUJIFILM Australia Pty Ltd
Technical support
Repair service
114 Old Pittwater Road, Brookvale, NSW, 2100, Australia
TEL 1800 226 355 FAX +61 (2) 9938 1975 digital@fujifilm.com.au
AFRICA
Egypt
Kenya
OCEANIA
Australia
142
Film Trading Company
Technical support
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503977 FAX 00967-1-503983
114 Joynton Avenue, Zetland, NSW, 2017, Australia
TEL 1800 226 355 FAX +61 (2) 9938 1975 digital@fujifilm.com.au
70-72 Cumming Street,Suva,Fiji
TEL (679)3304133 FAX (679)3302777 kapadia@connect.com.fj
Fiji
Brijlal & Co. Ltd
Technical support &
Repair service
New Caledonia
Phocidis SARL
Technical support &
Repair service
58, rue Higginson - B.P.661 - 98845
TEL (00 687) 25-46-35 FAX (00 687) 28-66-70 phocidis@phocidis.nc
New Zealand
Fujifilm NZ Ltd
Technical support &
Repair service
Cnr William Pickering & Bush Road Albany, Auckland
TEL +64-9-4140400 FAX +64-9-4140410 glenn.beaumont@fujifilm.co.nz
Papua New Guinea
Oceania PNG Limited
Technical support
Section 15, Allotment 1, Reke St, Boroko NCD. PNG. Mail: PO Box 2167, Boroko
NCD. PNG. TEL +675 3256411 FAX +675 3250311 oceania@daltron.com.pg
ASIA
Hong Kong
Fuji Photo Products Co., Ltd.
Technical support &
Repair service
8/F.,TSUEN WAN IND. CENTRE, 220 TEXACO RD., TSUEN WAN, HONG KONG
TEL (852)2406 3287 FAX (852)2408 3130 rsd@chinahkphoto.com.hk
Indonesia
PT Modern Photo Tbk
Technical support &
Repair service
Jl.Matraman Raya 12, Jakarta Timur 13150
TEL +62 021 2801000 FAX +62 021 8581620+62 021 2801012
kmr-srv@moderngroup.co.id
Malaysia
Fuji Photo Film (Malaysia)
Sdn. Bhd.
Technical support
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 digital@fujifilm.com.my
Philippines
Singapore
South Korea
YKL Development & Trdg. Corp.
Technical support
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 technical@fujifilm.com.my
24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 digital@yklcolor.com
24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 tech_services@yklcolor.com
Fuji Photo Film Singapore Pte Ltd 10 New Industrial Road Fujifilm Building Singapore 536201
TEL 65-6380 5557 FAX 65-6281 3594 service@fujifilm.com.sg
Technical support &
Repair service
30-1, Mukjeung-dong, Jung-gu, Seoul, Korea
Korea Fujifilm Co., Ltd.
TEL +82-2-3282-7363 FAX +82-2-2269-7435 photo@fujifilm.co.kr
Technical support
South Korea
Yonsan AS Center (Fujidigital)
Repair service
#301, 3F, Jeonjaland, 16-9, Hangangro3-ga, Yongsan-gu, Seoul, Korea
TEL +82-2-701-1472 FAX +82-2-718-1331 1bowl@hanmail.net
South Korea
Kangnam AS Center
(Digitalgallery)
Repair service
2F, Hyeongin Tower, 23-2, Bangyi-dong, Songpa-gu, Seoul, Korea
TEL +82-2-2203-1472 FAX +82-2-418-5572 nurijili@hanmail.net
South Korea
Busan AS Center (Digital-Sewon) 241-4, Bujeon-dong, Busanjin-gu, Busan, Korea
TEL +82-51-806-1472 FAX +82-51-817-0083 merahan@yahoo.co.kr
Repair service
No. 38, Min-Chuan E. Rd. Sec. 6, Taipei (114), Taiwan, R.O.C.
Hung Chong Corp.
TEL 886-2-6602-8988 FAX 886-2-2791-8647 dah@mail.hungchong.com.tw
Technical support &
Repair service
Taiwan
Thailand
Fuji Photo Film (Thailand) Ltd.
Technical support
Repair service
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext. 755 FAX +662-2730239 supaleark@fujifilm.co.th
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext.761,762 FAX +662-2730239 warin@fujifilm.co.th
143
Safety Notes
• Make sure that you use your FinePix F650 camera
correctly. Read these Safety Notes and your Owner’s
Manual carefully before use.
• After reading these Safety Notes, store them in a safe
place.
About the Icons
• The icons shown below are used in this document to
indicate the severity of the injury or damage that can
result if the information indicated by the icon is ignored
and the product is used incorrectly as a result.
WARNING
This icon indicates that death
or serious injury can result if
the information is ignored.
CAUTION
This icon indicates that
personal injury or material
damage can result if the
information is ignored.
The icons shown below are used to indicate the nature of
the information which is to be observed.
WARNING
If a problem arises, turn the camera off,
remove the battery, disconnect and
unplug the AC power adapter.
Continued use of the camera when it is
emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can
cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not allow water or foreign objects to
enter the camera.
If water or foreign objects get inside the
camera, turn the camera off, remove the
battery and disconnect and unplug the AC
power adapter.
Continued use of the camera can cause a
fire or electric shock.
• Contact your FUJIFILM dealer.
Do not use the camera in the bathroom
or shower.
This can cause a fire or electric shock.
Do not use in the
bathroom or
shower.
Triangular icons tell you that this information requires
attention (“important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an
action that must be performed (“Required”).
144
Unplug from
power socket.
Never attempt to change or take apart
the camera. (Never open the casing.)
Do not use the camera when it has been
dropped or the casing is damaged.
This can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not
disassemble.
WARNING
Do not change, heat or unduly twist or
pull the connection cord and do not
place heavy objects on the connection
cord.
These actions could damage the cord and
cause a fire or electric shock.
• If the cord is damaged, contact your
FUJIFILM dealer.
Do not place the camera on an unstable
surface.
This can cause the camera to fall or tip
over and cause injury.
Never attempt to take pictures while in
motion.
Do not use the camera while you are
walking or driving a vehicle.
This can result in you falling down or being
involved in a traffic accident.
Do not touch any metal parts of the
camera during a thunderstorm.
This can cause an electric shock due to
induced current from the lightning
discharge.
Do not use the battery except as
specified.
Load the battery as aligned with the
indicator.
WARNING
Do not heat, change or take apart the
battery.
Do not drop or subject the battery to
impacts.
Do not store the battery with metallic
products.
Do not use chargers other than the
specified model to charge the battery.
Any of these actions can cause the battery
to burst or leak and cause fire or injury as
a result.
Use only the battery or AC power
adapters specified for use with this
camera.
Do not use voltages other than the
power supply voltage shown.
The use of other power sources can cause
a fire.
If the battery leaks and fluid gets in
contact with your eyes, skin or
clothing. Flush the affected area with
clean water and seek medical attention
or call an emergency number right
away.
Do not use the charger to charge
battery other than those specified here.
The charger is designed for NP-40N
Rechargeable Battery. Using the charger
to charge conventional battery or other
types of rechargeable battery can cause
the battery to leak fluid, overheat or burst.
Continued Q
145
Safety Notes
WARNING
When carrying the NP-40N, install it in a
digital camera or keep it in the soft case
provided.
When storing the NP-40N, keep it in the
soft case provided.
When discarding, cover the battery
terminals with insulation tape.
Contact with other metallic objects or
battery could cause the battery to ignite or
burst.
Keep xD-Picture Cards out of the reach
of small children.
Because xD-Picture Cards are small,
they can be swallowed by children. Be
sure to store xD-Picture Cards out of the
reach of small children. If a child swallows
an xD-Picture Card, seek medical
attention or call an emergency number.
CAUTION
Do not use this camera in locations
affected by oil fumes, steam, humidity
or dust.
This can cause a fire or electric shock.
Do not leave this camera in places
subject to extremely high
temperatures.
Do not leave the camera in locations such
as a sealed vehicle or in direct sunlight.
This can cause a fire.
Keep out of the reach of small children.
This product could cause injury in the
hands of a child.
Do not place heavy objects on the
camera.
This can cause the heavy object to tip over
or fall and cause injury.
Do not move the camera while the AC
power adapter is still connected.
Do not pull on the connection cord to
disconnect the AC power adapter.
This can damage the power cord or cables
and cause a fire or electric shock.
Do not use the AC power adapter when
the plug is damaged or the plug socket
connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the
AC power adapter in a cloth or blanket.
This can cause heat to build up and distort
the casing or cause a fire.
146
CAUTION
When you are cleaning the camera or
you do not plan to use the camera for
an extended period, remove the battery
and disconnect and unplug the AC
power adapter.
Failure to do so can cause a fire or electric
shock.
When charging ends, unplug the
charger from the power socket.
Leaving the charger plugged into the
power socket can cause a fire.
Using a flash too close to a person’s
eyes may temporarily affect the
eyesight.
Take particular care when photographing
infants and young children.
When an xD-Picture Card is removed,
the card could come out of the slot too
quickly. Use your finger to hold it and
gently release the card.
Request regular internal testing and
cleaning for your camera.
Build-up of dust in your camera can cause
a fire or electric shock.
• Contact your FUJIFILM dealer to
request internal cleaning every 2 years.
• Please note this is not a free of charge
service.
147
26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan
http://home.fujifilm.com/products/digital/
Printed in Japan
1AG6P1P3047-A
FPT/Y-608105