Owner`s manual | FujiFilm J15fd Digital Camera User Manual

BL00814-200(1)
E
Before You Begin
Owner’s Manual
Thank you for your purchase of this product. This manual describes
how to use your FUJIFILM FinePix J15fd digital camera and the supplied software. Be sure that you have read and understood its contents before using the camera.
First Steps
Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Menus
For information on related products, visit our website at
http://www.fujifilm.com/products/index.html
Technical Notes
Troubleshooting
Appendix
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
• Read Instructions: All the safety and operating instructions should be read
before the appliance is operated.
• Retain Instructions: The safety and
operating instructions should be
retained for future reference.
• Heed Warnings: All warnings on the
appliance and in the operating instructions should be adhered to.
• Follow Instructions: All operating and
use instructions should be followed.
Alternate Warnings: This video product
is equipped with a three-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fit
into a grounding-type power outlet.
This is a safety feature. If you are unable
to insert the plug into the outlet, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the grounding type plug.
Water and Moisture: Do not use this video product near water—for example,
near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement,
or near a swimming pool, and the like.
Power-Cord Protection: Power-supply cords should be routed so that
they are not likely to be walked on
or pinched by items placed upon
or against them, paying particular
Overloading: Do not overload wall out- attention to cords at plugs, convelets and extension cords as this can nience receptacles, and the point
Installation
Power Sources: This video product result in a risk of fire or electric shock. where they exit from the appliance.
should be operated only from the Ventilation: Slots and openings in the Accessories: Do not place this video
type of power source indicated on cabinet are provided for ventilation, product on an unstable cart, stand,
the marking label. If you are not sure to ensure reliable operation of the tripod, bracket, or table. The video
of the type of power supply to your video product and to protect it from product may fall, causing serious inhome, consult your appliance dealer overheating, and these openings jury to a child or adult, and serious
or local power company. For video must not be blocked or covered. The damage to the appliance. Use only
products intended to operate from openings should never be blocked by with a cart, stand, tripod, bracket, or
battery power, or other sources, refer placing the video product on a bed, table recommended by the manufacto the operating instructions.
turer, or sold with the video product.
sofa, rug, or other similar surface.
Grounding or Polarization: This video
product is equipped with a polarized alternating-current line plug (a
plug having one blade wider than
the other). This plug will fit into the
power outlet only one way. This is a
safety feature. If you are unable to
insert the plug fully into the outlet,
try reversing the plug. If the plug
should still fail to fit, contact your
electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
ii
This video product should not be
placed in a built-in installation such
as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to. This video product should
never be placed near or over a radiator or heat register.
Any mounting of the appliance should
follow the manufacturer’s instructions,
and should use a mounting accessory
recommended by the manufacturer.
An appliance and
cart combination
should be moved
with care. Quick
stops, excessive
Attachments: Do not use attachments
force, and uneven
not recommended by the video
surfaces may cause the appliance and
product manufacturer as they may
cart combination to overturn.
cause hazards.
Antennas
Outdoor Antenna Grounding: If an
outside antenna or cable system is
connected to the video product, be
sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and
built-up static charges. Section 810
of the National Electrical Code, ANSI/
NFPA No. 70, provides information
with respect to proper grounding
of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of
grounding conductors, location of
antenna discharge unit, connection
to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
Ground
Clamp
Electric
Service
Equipment
Ground
Clamps
Antenna Lead
in Wire
Antenna
Discharge
Unit (NEC
SECTION
810-20)
Grounding
Power Service Grounding Conductors
Electrode System (NEC (NEC SECTION
ART 250. PART H)
810-21)
Power Lines: An outside antenna system should not be located in the
vicinity of overhead power lines or
For Your Safety
other electric light or power circuits,
or where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching such power lines or circuits
as contact with them might be fatal.
Use
Cleaning: Unplug this video product
from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth
for cleaning.
Object and Liquid Entry: Never push
objects of any kind into this video
product through openings as they
may touch dangerous voltage points
or short out parts that could result in a
fire or electric shock. Never spill liquid
of any kind on the video product.
Damage Requiring Service: Unplug this video product from the wall outlet and refer
servicing to qualified service personnel
under the following conditions:
• When the power-supply cord or
plug is damaged.
• If liquid has been spilled, or objects
have fallen into the video product.
• If the video product has been exposed to rain or water.
• If the video product has been dropped
or the cabinet has been damaged.
If the video product does not operate
normally follow the operating instructions. Adjust only those controls that are
covered by the operating instructions
as an improper adjustment of other
controls may result in damage and
will often require extensive work by a
qualified technician to restore the video
product to its normal operation.
Be sure to read these notes before use
Safety Notes
• Make sure that you use your camera correctly. Read these safety notes and
your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the severity of
the injury or damage that can result if the information indicated by the icon
is ignored and the product is used incorrectly as a result.
WARNING
CAUTION
This icon indicates that death or serious injury can result if the information
is ignored.
This icon indicates that personal injury or material damage can result if the
information is ignored.
The icons shown below are used to indicate the nature of the instructions
which are to be observed.
When the video product exhibits a
distinct change in performance—
this indicates a need for service.
Triangular icons tell you that this information requires attention (“Important”).
Replacement Parts: When replacement
parts are required, be sure the service
technician has used replacement
parts specified by the manufacturer
or have the same characteristics as
the original part. Unauthorized substitutions may result in fire, electric
Service
Servicing: Do not attempt to service shock or other hazards.
this video product yourself as open- Safety Check: Upon completion of any sering or removing covers may expose vice or repairs to this video product, ask
you to dangerous voltage or other the service technician to perform safety
hazards. Refer all servicing to quali- checks to determine that the video prodfied service personnel.
uct is in proper operating condition.
Filled circles with an exclamation mark indicate an action that must be performed (“Required”).
Lightning: For added protection for
this video product receiver during
a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna
or cable system. This will prevent
damage to the video product due to
lightning and power-line surges.
Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).
WARNING
Unplug
from power
socket
If a problem arises, turn the camera off and remove the battery. Continued use of the
camera when it is emitting smoke, is emitting any unusual odor, or is in any
other abnormal state can cause a fire or electric shock. Contact your FUJIFILM
dealer.
Do not allow water or foreign objects to enter the camera. If water or foreign objects
get inside the camera, turn the camera off and remove the battery. Continued
use of the camera can cause a fire or electric shock. Contact your FUJIFILM
dealer.
iii
For Your Safety
WARNING
Do not use in
the bathroom
or shower
Do not
disassemble
Do not use the camera in the bathroom or shower. This can cause a fire or electric
shock.
Never attempt to change or take apart the camera. (Never open the casing.) Do not use the
camera when it has been dropped or the casing is damaged. This can cause a fire or
electric shock. Contact your FUJIFILM dealer.
Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the connection cord. These actions could damage the cord and cause a fire
or electric shock. If the cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This can cause the camera to fall or
tip over and cause injury.
Never attempt to take pictures while in motion. Do not use the camera while you
are walking or driving a vehicle. This can result in you falling down or being
involved in a traffic accident.
CAUTION
Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This can
cause a fire or electric shock.
Do not leave this camera in places subject to extremely high temperatures. Do not leave
the camera in locations such as a sealed vehicle or in direct sunlight. This
can cause a fire.
Keep out of the reach of small children. This product could cause injury in the hands
of a child.
Do not place heavy objects on the camera. This can cause the heavy object to tip
over or fall and cause injury.
Do not touch any metal parts of the camera during a thunderstorm. This can cause an
electric shock due to induced current from the lightning discharge.
Do not cover or wrap the camera in a cloth or blanket. This can cause heat to build up
and distort the casing or cause a fire.
Do not use the battery except as specified. Load the battery as shown by the indicator.
When you are cleaning the camera or you do not plan to use the camera for an extended period, remove the battery. Failure to do so can cause a fire or electric shock.
Do not heat, change or take apart the battery. Do not drop or subject the battery to impacts.
Do not store the battery with metallic products. Do not use chargers other than the specified
model to charge the battery. Any of these actions can cause the battery to burst or
leak and cause fire or injury as a result.
Use only the battery specified for use with this camera. The use of other power sources
can cause a fire.
If the battery leaks and fluid gets in contact with your eyes, skin or clothing, flush the affected area with clean water and seek medical attention or call an emergency number right
away.
Do not use the charger to charge batteries other than those specified here. The supplied
BC-45A battery charger is for use with FUJIFILM NP-45 rechargeable batteries
only. Using the charger to charge conventional batteries or other types of
rechargeable batteries can cause the battery to leak fluid, overheat or burst.
When carrying the battery, install it in a digital camera or keep it in the hard case. When
storing the battery, keep it in the hard case. When discarding, cover the battery terminals
with insulation tape. Contact with other metallic objects or battery could cause
the battery to ignite or burst.
iv
WARNING
Keep memory cards out of the reach of small children. Because memory cards are
small, they can be swallowed by children. Be sure to store memory cards out
of the reach of small children. If a child swallows a memory card, seek medical
attention or call an emergency number.
When charging ends, unplug the charger from the power socket. Leaving the charger
plugged into the power socket can cause a fire.
Using a flash too close to a person’s eyes may temporarily affect the eyesight. Take particular care when photographing infants and young children.
When a memory card is removed, the card could come out of the slot too quickly. Use your
finger to hold it and gently release the card.
Request regular internal testing and cleaning for your camera. Build-up of dust in your
camera can cause a fire or electric shock. Contact your FUJIFILM dealer to
request internal cleaning every two years. Please note that this service is not
free of charge.
For Your Safety
The Battery and Power Supply
The following describes the proper
use of the battery and how to
prolong its life. Incorrect use can
shorten battery life or cause leakage,
overheating, fire, or explosion.
The battery is not charged at shipment. Charge the battery before
use. Keep the battery in its case
when not in use.
Notes on the Battery
The battery gradually loses its charge
when not in use. Charge the battery
one or two days before use.
Do not attempt to recharge a fully • Do not drop or subject to strong
charged battery. The battery does
physical shocks.
not however need to be fully dis- • Do not expose to water.
charged before charging.
• Keep the terminals clean.
• The battery and camera body may
The battery may be warm to the
become warm to the touch after
touch immediately after charging or
extended use. This is normal.
use. This is normal.
Using the Camera
Battery Life
At normal temperatures, the battery To ensure that images are recorded
can be recharged about 300 times. correctly, do not subject the camera
A noticeable decrease in the length to impact or physical shocks while
of time the battery will hold a charge images are being recorded.
indicates that it has reached the end Electrical Interference
of its service life and should be re- This camera may interfere with hosplaced.
pital or aviation equipment. Consult
Battery life can be extended by turning the camera off when not in use. Storage
Performance may be impaired if the
Battery capacity decreases at low tem- battery is left unused for extended
peratures; a depleted battery may not periods when fully charged. Run the
function at when cold. Keep a fully battery flat before storing it.
charged spare battery in a warm place
and exchange as necessary, or keep If the camera will not be used for an
the battery in your pocket or other extended period, remove the batwarm place and insert it in the camera tery and store it in a dry place with
only when shooting. Do not place the an ambient temperature of from
battery in direct contact with hand +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to exwarmers or other heating devices.
tremes of temperature.
Charging the Battery
Charge the battery in the supplied bat- Cautions: Handling the Battery
tery charger (pg. 4). Charging times • Do not transport or store with
metal objects such as necklaces or
will increase at ambient temperatures
hairpins.
below +10 °C (+50 °F) or above +35 °C
(+95 °F). Do not attempt to charge the • Do not expose to flame or heat.
battery at temperatures above 40 °C • Do not disassemble or modify.
(+104 °F); at temperatures below 0 °C • Use with designated chargers only.
(+32 °F), the battery will not charge. • Dispose of used batteries promptly.
induce vomiting, then seek medical assistance.
Take Test Shots
Before taking photographs on important occasions (such as at weddings
or before taking the camera on a trip),
take a test shot and view the result in
the monitor to ensure that the camera is functioning normally. FUJIFILM
Corporation can not accept liability
for damages or lost profits incurred
as a result of product malfunction.
with hospital or airline staff before
using the camera in a hospital or on
an aircraft.
Liquid Crystal
In the event that the monitor is damaged, care should be taken to avoid
contact with liquid crystal. Take the
urgent action indicated should any
of the following situations arise:
• If liquid crystal comes in contact with
your skin, clean the area with a cloth
and then wash thoroughly with
soap and running water.
• If liquid crystal enters your eyes, flush
the affected eye with clean water
for at least 15 minutes and then
seek medical assistance.
• If liquid crystal is swallowed, rinse
your mouth thoroughly with water.
Drink large quantities of water and
v
For Your Safety
NOTICES
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Notes on the Grant
To comply with Part 15 of the FCC Rules, this product must be used with a
Please read the “Safety Notes” (pages iii–v) and make sure you understand
FUJIFILM-specified ferrite-core A/V cable, USB cable, and DC supply cord.
them before using the camera.
For Customers in Canada
Perchlorate Material—special handling may apply. See http://www.dtsc.
CAUTION: This Class B digital apparatus complies with Canadian ICES-003.
ca.gov/hazardouswaste/perchlorate.
For Customers in the U.S.A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved
in this manual could void the user’s authority to operate the equipment.
vi
EC Declaration of Conformity
We
Name:
FUJIFILM Electronic Imaging Europe GmbH
Address:
Benzstrasse 2
47533 Kleve, Germany
declare that the product
Product Name:
FUJIFILM DIGITAL CAMERA FinePix J15fd
Manufacturer’s Name: FUJIFILM Corporation
Manufacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO,
107-0052 JAPAN
conforms to the following Standards:
Safety:
EN60065: 2002 + A1
EMC:
EN55022: 1998 + A1: 2000 + A2: 2003 Class B
EN55024: 1998 + A1: 2001 + A2: 2003
EN61000-3-2: 2000 + A2: 2005
EN61000-3-3: 1995 + A1: 2001 + A2: 2005
following the provision of the EMC Directive (2004/108/EC) and Low Voltage Directive (2006/95/EC).
Kleve, Germany
August 1, 2008
Place
Date
Signature, Managing Director
For Your Safety
Disposal of Electrical and Electronic Equipment in Private Households
Notes on Copyright
Unless intended solely for personal use, images recorded using your digital
Disposal of used Electrical & Electronic Equipment (Applicable in the European Union ,
camera system cannot be used in ways that infringe copyright laws withNorway, Iceland and Liechtenstein)
out the consent of the owner. Note that some restrictions apply to the
This symbol on the product, or in the manual and in the photographing of stage performances, entertainments, and exhibits, even
warranty, and/or on its packaging indicates that this prod- when intended purely for personal use. Users are also asked to note that
the transfer of memory cards containing images or data protected under
uct shall not be treated as household waste.
copyright laws is only permissible within the restrictions imposed by those
Instead it should be taken to an applicable collection point
copyright laws.
for the recycling of electrical and electronic equipment.
Trademark Information
By ensuring this product is disposed of correctly, you will
and xD-Picture Card are trademarks of FUJIFILM Corporation. Mahelp prevent potential negative consequences to the environment and human health, which could otherwise be cintosh and Mac OS are trademarks of Apple Inc. in the U.S.A. and other
countries. Microsoft, Windows, the Windows logo, Windows Vista and the
caused by inappropriate waste handling of this product.
Windows Vista logo are trademarks or registered trademarks of Microsoft
This symbol on the batteries or accumulators indicates that Corporation in the United States and/or other countries. “Windows” is an
those batteries shall not be treated as Household waste.
abbreviation used in reference to the Microsoft Windows operating system.
Adobe and Adobe Reader are either trademarks or registered trademarks
If your equipment contains easy removable batteries or acof Adobe Systems Incorporated in the U.S.A. and/or other countries. The
cumulators please dispose these separately according to
SDHC logo is a trademark.
your local requirements.
Note: The “Designed for Microsoft® Windows® XP” and “CERTIFIED FOR Windows
The recycling of materials will help to conserve natural resources. For more
Vista™” logos apply only to the camera and camera hardware driver.
detailed information about recycling this product, please contact your local
city office, your household waste disposal service or the shop where you
purchased the product.
In Countries Outside the European Union, Norway, Iceland and Liechtenstein:
If you wish to discard this product including the batteries or accumulators, please contact your local authorities and ask for the correct way of
disposal.
vii
Camera Q & A
Find items by task.
Camera Setup
Question
How do I set the camera clock?
Can I set the clock to local time when I travel?
How do I keep the monitor from turning off automatically?
How do I stop the camera beeping and clicking?
What are the parts of the camera called?
What do the icons in the monitor mean?
How do I use the menus?
What’s behind that flashing icon or error message in the monitor?
How much charge is left in the battery?
Key phrase
See page
Date and time
12
Time difference
76
Auto power off
75
Operation and shutter volume
71
Parts of the camera
2
Monitor
3
Menus
54
Messages and displays
86
Battery level
13
Taking Pictures
Question
How many pictures can I take?
Is there a quick and easy way to take snapshots?
How can I make good portraits?
Is there a simple way to adjust settings for different scenes?
How do I shoot close-ups?
How do I keep the flash from firing?
How do I stop my subjects’ eyes glowing red when I use the flash?
How do I “fill-in” shadows on back-lit subjects?
How do I take a group portrait that includes the photographer?
How do I frame pictures with the subject off to one side?
How do I shoot movies?
viii
Key phrase
Memory capacity
AUTO mode
Intelligent Face Detection
Shooting mode
Close-ups (macro mode)
See page
92
13
18
28
23
Flash mode
24
Self-timer mode
Focus lock
Recording movies
26
21
37
Camera Q & A
Viewing Pictures
Question
How do I view my pictures?
How do I get rid of unwanted pictures?
How do I delete a lot of pictures at once?
Can I zoom in on pictures during playback?
How do I view a lot of pictures at once?
How do I view all pictures taken on the same day?
Can I protect my pictures from accidental deletion?
Can I hide the icons in the monitor when viewing my pictures?
How do I view my pictures on TV?
Key phrase
Single-frame playback
Deleting pictures
Erase
Playback zoom
Multi-frame playback
Sort by date
Protect
Choosing a display format
Viewing pictures on TV
See page
32
17
35
33
33
34
65
32
40
Sharing Pictures
Question
Can I print pictures on my home printer?
Can I copy my pictures to my computer?
Key phrase
See page
Printing pictures
41
Viewing pictures on a computer
47
ix
Table of Contents
For Your Safety ................................................................................. ii
IMPORTANT SAFETY INSTRUCTIONS ...................................... ii
Safety Notes .................................................................................... iii
NOTICES ............................................................................................ vi
Camera Q & A ..................................................................................viii
About This Manual ........................................................................ xii
Before You Begi
Begin
n
Introduction....................................................................................... 1
Symbols and Conventions .......................................................... 1
Supplied Accessories .................................................................... 1
Parts of the Camera ....................................................................... 2
The Monitor ................................................................................... 3
First Steps
Steps
Charging the Battery ..................................................................... 4
Inserting the Battery...................................................................... 6
Inserting a Memory Card ............................................................. 8
Turning the Camera on and Off............................................... 11
Shooting Mode ............................................................................. 11
Playback Mode .............................................................................. 11
Basic Setup .......................................................................................12
Basic Photography and Playbac
Playback
k
Taking Pictures in AUTO Mode ................................................13
Viewing Pictures ............................................................................17
x
More on Photography
Photography
Intelligent Face Detection and Red-Eye Removal ..........18
Focus Lock ........................................................................................21
G Close-ups (Macro Mode) ......................................................23
T Using the Flash ...........................................................................24
F Using the Self-Timer ...............................................................26
Shooting Mode ...............................................................................28
Selecting a Shooting Mode......................................................28
Shooting Modes ...........................................................................29
More on Playback
Playback
Playback Options...........................................................................32
Playback Zoom..............................................................................33
Multi-Frame Playback.................................................................33
Sort by Date....................................................................................34
I Deleting Pictures .....................................................................35
Moviess
Movie
A Recording Movies ...................................................................37
H Viewing Movies .......................................................................39
Connectionss
Connection
Viewing Pictures on TV ...............................................................40
Printing Pictures via USB ...........................................................41
Connecting the Camera ............................................................41
Printing Selected Pictures ........................................................41
Printing the DPOF Print Order ................................................42
Creating a DPOF Print Order ....................................................44
Viewing Pictures on a Computer............................................47
Installing FinePixViewer ............................................................47
Connecting the Camera ............................................................52
Table of Contents
Menuss
Menu
Technical Note
Notess
The Shooting Menu ......................................................................54
Using the Shooting Menu.........................................................54
Shooting Menu Options ............................................................55
B ISO .............................................................................................56
C QUALITY ..................................................................................57
D EXP. COMPENSATION .........................................................58
E WHITE BALANCE ..................................................................59
G CONTINUOUS ........................................................................60
The Playback Menu.......................................................................61
Using the Playback Menu .........................................................61
Playback Menu Options.............................................................62
U RED EYE REMOVAL ..............................................................63
J SLIDE SHOW ..........................................................................64
L PROTECT .................................................................................65
M COPY .........................................................................................66
N IMAGE ROTATE ......................................................................68
O TRIMMING ..............................................................................69
The Setup Menu .............................................................................70
Using the Setup Menu ...............................................................70
Setup Menu Options...................................................................71
a IMAGE DISP. ..........................................................................72
b FRAME NO. ............................................................................73
d DIGITAL ZOOM ....................................................................74
e LCD POWER SAVE ...............................................................74
i PLAYBACK VOLUME ...........................................................74
j LCD BRIGHTNESS ................................................................74
k FORMAT..................................................................................75
m AUTO POWER OFF ..............................................................75
n TIME DIFFERENCE ...............................................................76
Optional Accessories ...................................................................77
Accessories from FUJIFILM .......................................................78
Caring for the Camera .................................................................79
Troubleshooting
Troubleshootin
g
Troubleshooting ............................................................................80
Warning Messages and Displays ............................................86
Appendix
Appendi
x
Glossary .............................................................................................90
Flash Mode and Shooting Mode ............................................91
Internal Memory/Memory Card Capacity ..........................92
Specifications ..................................................................................93
FUJIFILM Digital Camera Worldwide Network ............. 100
xi
About This Manual
Before using your camera, read this manual and the warnings on pages ii–vii. For information on specific topics, consult the sources below.
✔ Camera Q & A ..................................................pg.
..................................................pg. viii ✔ Table of Contents ...............................................pg.
............................................... pg. x
Know what you want to do but don’t know the The “Table of Contents” gives an overview of the
name for it? Find the answer in “Camera Q & A.” entire manual. The principal camera operations
are listed here.
✔ Troubleshooting ..............................................
..............................................pg.
pg. 80
Having a specific problem with the camera?
Find the answer here.
✔ Warning Messages and Displays .......................
.......................pg.
pg. 86
Find out what’s behind that flashing icon or error
message in the monitor.
✔ Glossary ..........................................................pg.
..........................................................pg. 90
The meanings of some technical terms may be
found here.
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional xD-Picture Cards and SD and SDHC
memory cards. In this manual, both xD-Picture Cards and SD memory cards are referred to as “memory cards.”
For more information, see page 8.
xii
Introduction
Symbols and Conventions
Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simplified for explanatory purposes.
Before You Begin
The following symbols are used in this manual:
3 Caution: This information should be read before use to ensure correct operation.
1Note: Points to note when using the camera.
2 Tip: Additional information that may be helpful when using the camera.
Supplied Accessories
The following items are included with the camera:
or
NP-45 rechargeable
battery
A/V cable
BC-45A battery charger (with
power cable or built-in plug)
USB cable
Soft case
Strap
Attaching the Strap
Attach the strap
as shown.
FinePix software CD
(IMPORTANT: read
license agreement
on the last page of
this manual before
opening)
Owner’s Manual
(this manual)
1
Introduction
Parts of the Camera
For more information, refer to the page listed to the right of each item.
8
1
2
3
9
10
11
Selector button
7
12
4
13
17 16
14
15
18
Move cursor up
K (monitor brightness)
button (see below)
I (delete) button (pg. 17)
Move cursor left
G (macro)
button (pg. 23)
MENU/OK button
(pg. 12)
Move cursor right
T (flash) button
(pg. 24)
5
6
1
2
3
4
5
6
7
8
20
19
Move cursor down
F (self-timer) button (pg. 26)
Shutter button ...................................15–16 9 Indicator lamp ............................................16 16 Tripod mount
J button ......................................... 11 10 W (zoom out) button .............................14 17 Speaker ...........................................................39
Flash..................................................................24 11 T (zoom in) button...................................14 18 Battery chamber ......................................... 6
Self-timer lamp ..........................................27 12 H (playback) button ............................32 19 Battery latch .................................................. 6
Microphone .................................................37 13 Strap eyelet .................................................... 1 20 Memory card slot ....................................... 9
Lens and lens cover ................................ 11 14 Connector for USB cable ............. 41, 52
Connector for A/V cable .....................40
Monitor ............................................................. 3
DISP (display)/BACK button .......... 15, 32 15 Battery-chamber cover .......................... 6
2 Monitor Brightness
Pressing the K button briefly increases monitor brightness, making the display easier to see in bright light. Normal brightness is restored when a photograph is taken.
2
Introduction
The Monitor
The following indicators may appear in the monitor during shooting and playback:
5 4 3 2 1
6
7
8
11
N
2
ISO 100
12
13
14
15
16
9
1
2
3
4
5
17 *
6
7
8
* q: Indicates that no memory card is inserted
9
and that pictures will be stored in the camera’s
10
internal memory (pg. 8).
10
12/31/2050 10 : 00 AM
-1 2 3
250
F3.3
18
White balance ..................................59
Self timer indicator ........................26
Macro (close-up) mode............. 23
Flash mode.........................................24
Intelligent Face Detection
indicator ...............................................18
Shooting mode ...............................28
Battery level .......................................13
Continuous mode ........................ 60
Focus frame .......................................15
Date and time...................................12
11 Quality ........................................... 37, 57
12 Number of exposures
remaining ............................................92
13 Sensitivity ........................................... 56
14 Focus warning .................................15
15 Blur warning ......................................24
16 Bright monitor indicator.............. 2
17 Internal memory indicator * ....... 8
18 Exposure compensation .......... 58
Protected image .............................65
DPOF print indicator ....................45
Red-eye removal indicator ......63
Intelligent Face Detection
indicator .......................................18, 63
5 Playback mode indicator ..........32
6 Gift image ...........................................32
7 Frame number ................................ 73
Before You Begin
■ Shooting
■ Playback
4 3 2 1
5
6
100-0001
N
ISO 100
7
1
2
3
4
12/31/2050 10 : 00 AM
-1 2 3
250
F3.3
3
Charging the Battery
The battery is not charged at shipment. Charge the battery before use.
the battery in the charger.
1 Place
Insert the battery into the supplied BC-45A
First Steps
battery charger as shown, making sure that
the battery is in the correct orientation. The
BC-45A comes in one of two types, depending on the country or region of sale: one with
a built-in plug that plugs directly into the
power outlet (A), and another that connects
to the power outlet via a power cable (B).
NP-45 rechargeable battery
BC-45A battery charger
(type A)
Arrow
Terminals
BC-45A battery charger
(type B)
4
Plug the charger in.
2 Plug
the charger into a power outlet.
The
red charging indicator will light.
Type A
Type B
The Charging Indicator
The charging indicator shows battery charge
status as follows:
Charging indicator Battery status
Action
Battery not
Insert the
inserted.
battery.
Off
Battery fully Remove the
charged.
battery.
Battery
Glows red
—
charging.
Unplug the
charger and
Blinks red
Battery fault.
remove the
battery.
Charging the Battery
the battery.
3 Charge
Charging is complete when the charging indicator turns off. A fully exhausted battery
takes about 100 minutes to charge.
First Steps
3 Cautions: Caring for the Battery
• Do not affix stickers or other objects to the battery.
Failure to observe this precaution could make it impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery could
overheat.
• Read the cautions on page v.
• Use only NP-45 batteries. Failure to observe this precaution could result in product malfunction.
• Do not remove the labels from the battery or attempt
to split or peel the outer casing.
• The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
3 Cautions: Using the Battery Charger
• Unplug the charger when it is not in use.
• Remove dirt from the battery terminals with a clean,
dry cloth. Failure to observe this precaution could
prevent the battery from charging.
• Charging times increase at low temperatures.
5
Inserting the Battery
After charging the battery, insert it in the camera as described below.
1 Open the battery-chamber cover.
Insert the battery.
2 Align
the orange stripe on the battery with
the orange arrow on the camera and slide
the battery into the camera, pressing the
battery latch in the direction shown below.
Confirm that the battery is securely latched.
Battery latch
1 Note
Be sure the camera is off before opening the battery-chamber cover.
3 Cautions
• Do not open the battery-chamber cover when
the camera is on. Failure to observe this precaution could result in damage to image files or
memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
Orange arrow
Orange stripe
3 Caution
Insert the battery in the correct orientation. Do
NOT use force or attempt to insert the battery upside down or backwards.
6
Inserting the Battery
3 Close the battery-chamber cover.
Removing the Battery
After turning the camera off, open the battery-chamber cover, press the battery latch to the side, and slide
the battery out of the camera as shown.
First Steps
Battery latch
3 Caution
Turn the camera off before removing the battery.
7
Inserting a Memory Card
Although the camera can store pictures in internal memory, optional xD-Picture Cards or SD memory
cards can be used to store additional pictures.
When no memory card is inserted, q appears in the monitor and internal memory is used for recording
and playback. Note that because camera malfunction could cause internal memory to become corrupted, the pictures in internal memory should periodically be transferred to a computer and saved on
the computer hard disk or on removable media such as CDs or DVDs. The pictures in internal memory
can also be copied to a memory card (see page 66). To prevent internal memory from becoming full,
be sure to delete pictures when they are no longer needed.
When a memory card is inserted as described below, the card will be used for recording and playback.
■ Compatible Memory Cards
xD-Picture Cards and SanDisk SD and SDHC memory cards have been tested and approved for use in
the J15fd. A complete list of approved memory cards is available at http://www.fujifilm.com/products/
digital_cameras/index.html. Operation is not guaranteed with other cards. The camera can not be used
with multimedia cards.
3 Caution
Memory cards can be locked, making it impossible to format the card or to record or delete
images. Before inserting a memory card, slide the write-protect switch to the unlocked position.
Write-protect
switch
8
Inserting a Memory Card
3 Close the battery-chamber cover.
■ Inserting a Memory Card
1 Open the battery-chamber cover.
Be sure card is in correct orientation; do not
insert at an angle or use
force. Illustration shows
xD-Picture Card.
Removing Memory Cards
Press the card in and then release it slowly. The card can
now be removed by hand.
First Steps
2
Insert the memory card.
Holding the memory card in the orientation
shown below, slide it all the way in.
3 Cautions
• The memory card may spring out if you remove
your finger immediately after pushing the card in.
• Memory cards may be warm to the touch after being removed from the camera. This is normal and
does not indicate a malfunction.
9
Inserting a Memory Card
3 Cautions
• Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer
or other device. For more information on formatting memory cards, see page 75.
• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card,
seek medical assistance immediately.
• Do not use miniSD or microSD adapters that expose the back of the card. Failure to observe
this precaution may cause damage or malfunction. Adapters that are larger or smaller than the
standard dimensions of an SD card may not eject normally; if the card does not eject, take the
camera to an authorized service representative. Do not forcibly remove the card.
• Do not turn the camera off or remove the memory card while the memory card is being formatted or data are
being recorded to or deleted from the card. Failure to observe this precaution could damage the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• FUJIFILM xD-Picture Cards are recommended. Results can not be guaranteed with xD-Picture Cards from other
manufacturers. The camera can be used with both type M and type H xD-Picture Cards; note, however, that
type H cards are not compatible with the optional DPC-UD1 xD-Picture Card USB drive. The card type can be
determined from the model number: for example, “DPC-M2GB” indicates a type M card.
• Movie recording may be interrupted with some types of memory card.
• The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the
repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in which pictures are stored. Do
not rename or delete this folder or use a computer or other device to edit, delete, or rename image files. Always
use the camera to delete pictures from memory cards and internal memory; before editing or renaming files,
copy them to a computer and edit or rename the copies, not the originals.
10
Turning the Camera on and Off
Playback Mode
Press the J button to turn the camera on.
The lens will extend and the lens cover will open.
To turn the camera on and begin playback, press
the H button for about a second.
Press J again to turn the camera off.
Press the H button again to turn the camera off.
2 Tip: Switching to Playback Mode
Press the H button to start playback. Press the shutter
button halfway to return to shooting mode.
2 Tip: Switching to Shooting Mode
To exit to shooting mode, press the shutter button
halfway. Press the H button to return to playback.
First Steps
Shooting Mode
3 Caution
Pictures can be affected by fingerprints and other
marks on the lens. Keep the lens clean.
2 Tip: Auto Power Off
The monitor will dim to save power if no operations are performed for about eight seconds in shooting mode.
Full brightness can be restored by operating any of the camera controls. The camera will turn off automatically if
no operations are performed for the length of time selected in the AUTO POWER OFF menu (see page 75). To
turn the camera on, press the J button or press the H button for about a second.
11
Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 70).
1 Choose a language.
2 Set the date and time.
DATE / TIME NOT SET
START MENU
2010
2009
MM/DD/YY
1/ 1
2008
2007
2006
SET
NO
1.1 Press the selector up, down,
left, or right to highlight a language.
1.2 Press MENU/OK.
SET
12 : 00
AM
NO
2.1 Press the selector left or right
to highlight the year, month,
day, hour, or minute and press
up or down to change. To change the order in which the year, month, and day are
displayed, highlight the date format and
press the selector up or down.
2.2 Press MENU/OK.
2 Tip: The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog
will be displayed when the camera is turned on. If the battery is left in the camera for about 30 minutes, the battery can be removed for about 2 hours without resetting the clock or language selection.
12
Taking Pictures in AUTO Mode
This section describes how to take pictures in AUTO mode.
the camera on.
1 Turn
Press the J button to turn the camera
the battery level.
2 Check
Check the battery level in the monitor.
on.
q
e
r
Indicator
Description
Battery partially discharged.
q (white)
Battery more than half discharged.
w (white)
Low battery. Charge as soon as pose (red)
sible.
r (blinks red) Battery exhausted. Turn camera off
and charge battery.
Basic Photography and Playback
2 Tip: Intelligent Face Detection
The first time the camera is turned on, Intelligent Face
Detection is automatically activated and the camera is
optimized for taking portrait photographs. For more
information on using Intelligent Face Detection, see
page 18.
w
13
Taking Pictures in AUTO Mode
the picture.
3 Frame
Position the main subject in the focus area
and use the zoom buttons to frame the picture in the monitor.
Press W to zoom out
AUTO
Press T to zoom in
Holding the Camera
Hold the camera steady
with both hands and brace
your elbows against your
sides. Shaking or unsteady
hands can blur your shots.
AUTO
To prevent pictures that are
out of focus or too dark (underexposed), keep your fingers and other objects away
from the lens and flash.
Zoom indicator
Zoom in up to 3 × using
optical zoom, or use digital zoom (pg. 74) to zoom
in closer.
2 Tip: Focus Lock
Use focus lock (pg. 21) to focus on subjects that are not in the focus frame.
14
Taking Pictures in AUTO Mode
The Framing Grid
To display a framing grid or to view or hide other indicators in the monitor, press the DISP/BACK button.
Focus.
4 Press
the shutter button halfway to focus on
the main subject in the focus frame.
AUTO
Indicators
displayed
AUTO
Indicators
hidden
Framing grid
displayed
To use the framing grid, position the main subject at
the intersection of two lines or align one of the horizontal lines with the horizon. Use focus lock (pg. 21)
to focus on subjects that will not be in the center of
the frame in the final photograph.
F3.3
Camera selects small
focus frame and
Press
focuses on subject
halfway
If the camera is able to focus, it will beep twice
and the indicator lamp will glow green.
If the camera is unable to focus, a f indicator
will appear in the monitor, and the indicator
lamp will blink green. Change the composition or use focus lock (pg. 21).
Basic Photography and Playback
1 / 250
Focus frame
AUTO
1 Note
The lens may make a noise when the camera focuses.
This is normal.
15
Taking Pictures in AUTO Mode
Shoot.
5 Smoothly
press the shutter button
The Indicator Lamp
the rest of the way down to take
the picture.
2 Tip: The Shutter Button
The shutter button has two Double
positions. Pressing the shutter
beep
button halfway (q) sets focus
q
and exposure; to shoot, press
the shutter button the rest of
the way down (w).
Indicator lamp
CLICK
w
1 Note
If the subject is poorly lit, the flash may fire when the
picture is taken. To take pictures without the flash,
choose another flash mode (pg. 24).
The indicator lamp shows camera status as follows:
Indicator lamp
Camera status
Glows green Focus locked.
Camera unable to focus or picture
Blinks green
may be blurred. Picture can be taken.
Glows
Recording pictures. No additional
orange
pictures can be taken at this time.
Flash charging; flash will not fire when
Blinks orange
picture is taken.
Lens or memory error (internal memory or memory card full or not formatBlinks red
ted, format error, or other memory
error).
2 Tip: Warnings
Detailed warnings appear in the monitor. See pages
86–89 for more information.
16
Viewing Pictures
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results.
1 Press the H button.
Deleting Pictures
To delete the picture currently displayed
in the monitor, press the selector up (I).
The following dialog will be displayed.
The most recent picture will be displayed in
the monitor.
OK
CANCEL
SET
100-0001
N
ISO 100
12 / 31 / 2050 10 : 00 AM
250
F3.3
additional pictures.
2 View
Press the selector right to view
pictures in the order recorded, left
to view pictures in reverse order.
To delete the picture, press the selector
left to highlight OK and press MENU/OK.
To exit without deleting the picture, highlight CANCEL and press MENU/OK.
2 Tip: The Playback Menu
Pictures can also be deleted from the playback menu
(pg. 35).
Basic Photography and Playback
ERASE OK?
Press the shutter button to exit to shooting
mode.
17
Intelligent Face Detection and Red-Eye Removal
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for group
portraits to prevent the camera from focusing on the background. It can be used in tall and wide orientations and is available in AUTO, B, C, F, I, D, M, L, K, O, N, and B modes (pp. 28–31).
Intelligent Face Detection also offers a red-eye removal option for removing “red-eye” effects caused
by the flash.
Intelligent Face Detection on.
1 Turn
1.1 Press MENU/OK to display the
shooting menu.
More on Photography
SHOOTING MENU
SHOOTING MODE
AUTO
FACE DETECTION
ISO
QUALITY
CONTINUOUS
AUTO
N
OFF
1.2 Press the selector up or down
to highlight P FACE DETECTION.
1.3 Press the selector right to display Intelligent Face Detection
options.
18
1.4 Press the selector up or down
to highlight the desired option.
Option
R ON
V ON
R ON
V OFF
OFF
Description
Intelligent Face Detection and red-eye
removal on. Use with the flash.
Intelligent Face Detection on; red-eye
removal off.
Intelligent Face Detection and red-eye
removal off.
1.5 Press MENU/OK to select the
highlighted option and return
to shooting mode.
A R icon appears in the monitor when Intelligent Face Detection is on.
AUTO
Intelligent Face Detection and Red-Eye Removal
the picture.
2 Frame
If a face is detected,
it AUTO
will be indicated by a
green border. If there is
more than one face in
the frame, the camera will
Green border
select the face closest to
the center; other faces are indicated by white
borders.
Focus.
3 Press
the shutter button halfway
to set focus and exposure for the
subject in the green border.
More on Photography
3 Cautions
• If no face is detected when the shutter button is
pressed halfway (pg. 82), the camera will focus
on the subject at the center of the monitor and
red-eye will not be removed.
• In K and B modes, exposure will be optimized for the entire scene rather than the selected portrait subject.
19
Intelligent Face Detection and Red-Eye Removal
Shoot.
4 Press
the shutter button all the
way down to shoot.
3 Caution
If the subject moves as the shutter button is
pressed, their face may not be in the area indicated by the green border when the picture is taken.
If R ON/V ON is se- REMOVING
lected, the picture will
be processed to reduce
red-eye before it is recorded (the U RED-EYE
REMOVAL option in the playback menu can
also be used to reduce red-eye; pg. 63).
20
Intelligent Face Detection
Intelligent Face Detection is
recommended when using the
self-timer for group- or self-portraits (pp. 26–27).
7
During slide shows, the camera can zoom in on pictures taken with Intelligent Face Detection (pg. 64).
Focus Lock
To compose photographs with off-center subjects:
1 Position the subject in the focus frame.
AUTO
recompose the picture.
cus and exposure. Focus and exposure will
remain locked while the shutter button is
pressed halfway (AF/AE lock).
250
F3.3
250
F3.3
Shoot.
4 Press
the shutter-release button the rest of
the way down to take the picture.
Press the rest of
the way down
More on Photography
Focus.
2 Press
the shutter button halfway to set fo-
Press
halfway
the picture.
3 Recompose
Keeping the shutter button pressed halfway,
Repeat steps 1 and 2 as desired to refocus
before taking the picture.
21
Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed
below. If the camera is unable to focus using autofocus, use focus lock (pg. 21) to focus on another subject at
the same distance and then recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
•
•
•
•
Subjects photographed through a window or other reflective object.
Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
Insubstantial subjects, such as smoke or flame.
Subjects that show little contrast with the background (for example, subjects in clothing that is the same color
as the background).
• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
22
G Close-ups (Macro Mode)
Macro mode can be used for close-ups in AUTO, B, C, D, N, P, Q, and B modes (pp. 28–31).
Macro mode is automatically selected in P and Q modes; to select macro mode in AUTO, B, C,
D, N, and B modes, press the selector left (G).
AUTO
G icon appears in monitor when
camera is in macro mode
To exit macro mode, press the selector left (G). Macro mode can also be cancelled by turning the
camera off or selecting another shooting mode.
1 Note
Use of a tripod is recommended to prevent blur caused by camera shake.
More on Photography
When macro mode is in effect, the camera focuses on subjects near the center of the monitor. Use the
zoom buttons to frame pictures.
23
T Using the Flash
Use the flash when lighting is poor, for example when shooting at night or indoors under low light.
To choose a flash mode, press the selector right (T). The flash mode
changes each time the selector is pressed; in modes other than AUTO,
the current mode is indicated by an icon in the monitor. Choose from the
following options (some options are not available in all shooting modes;
see pg. 91):
Mode
Description
AUTO (no icon) The flash fires when required. Recommended in most situations.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural coloration
T (fill flash)
when shooting in bright light.
The flash does not fire even when the subject is poorly lit. g will appear in the monitor at slow
X (flash off )
shutter speeds to warn that pictures may be blurred. Use of a tripod is recommended.
Capture both the main subject and the background when shooting at night (note that brightly
U (slow sync) lit scenes may be overexposed). If I is selected for A SHOOTING MODE, shutter speed may
be as slow as 4 s. Use a tripod.
If the flash will fire, c will be displayed in the monitor when the shutter button is pressed halfway.
3 Caution
The flash may fire several times with each shot. Do not move the camera until shooting is complete.
24
T Using the Flash
Red-Eye Removal
When R ON/V ON is selected for Intelligent Face Detection (pg. 18), red-eye removal (V) is available in AUTO (q), fill flash (r), and slow sync (W) modes. Red-eye removal minimizes “red-eye”
caused when light from the flash is reflected from the subject’s retinas as shown in the illustration
at right.
More on Photography
25
F Using the Self-Timer
The camera offers a ten-second timer that allows photographers to appear in their own photographs,
and a two-second timer that can be used to avoid blur caused by the camera moving when the shutter
button is pressed. The self-timer is available in all shooting modes.
the timer.
1 Set
The current self-timer mode is displayed in the monitor. To choose a different setting, press the
selector down (F). The selection changes each time the selector is pressed.
AUTO
Choose from Z (self-timer off ),
S (10 s delay), or R (2 s delay)
Focus.
2 Press
the shutter button halfway to focus.
3 Caution
Stand behind the camera when using the shutter button. Standing in front
of the lens can interfere with focus and exposure.
the timer.
3 Start
Press the shutter button the rest of the way down to start the timer.
The display in the monitor shows the number of seconds remaining
until the shutter is released. To stop the timer before the picture is
taken, press DISP/BACK.
26
9
F Using the Self-Timer
The self-timer lamp on the front of the camera will
blink immediately before the picture is taken. If the
two-second timer is selected, the self-timer lamp
will blink as the timer counts down.
More on Photography
Intelligent Face Detection
Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 18) is recommended when using the self-timer for group portraits or self-portraits. To use the self-timer with Intelligent Face
Detection, set the timer as described in Step 1 and then press the shutter button all the way down to start the
timer. The camera will detect faces while the timer is counting down and adjust focus and exposure immediately before the shutter is released. Be careful not to move until the picture has been recorded.
1 Note
The self-timer turns off automatically when the picture is taken, a different shooting mode is selected, playback
mode is selected, or the camera is turned off.
27
Shooting Mode
Choose a shooting mode according to the scene or type of subject.
Selecting a Shooting Mode
MENU/OK to display the shoot1 Press
ing menu.
the selector right to display
3 Press
shooting mode options.
SHOOTING MENU
SHOOTING MODE
MOVIE
MANUAL
AUTO
BABY MODE
AUTO
FACE DETECTION
ISO
QUALITY
CONTINUOUS
AUTO
N
OFF
the selector up or down to
2 Press
highlight A SHOOTING MODE.
Automatic mode
setting according to
shooting conditions.
SET
CANCEL
the selector up or down to
4 Press
highlight the desired mode.
MENU/OK to select the high5 Press
lighted option.
28
Shooting Mode
Shooting Modes
A AUTO
Choose for crisp, clear snapshots (pg. 13). This
mode is recommended in most situations.
B BABY MODE
Choose for natural skin tones when taking portraits of infants. The flash turns off automatically.
1 Note
In modes other than B (pg. 31), B ISO is fixed at
AUTO (pg. 56). See page 91 for restrictions on flash
mode settings.
G LANDSCAPE
Choose this mode for crisp,
clear daylight shots of buildings and landscapes. The flash
turns off automatically.
H SPORT
Choose this mode when photographing moving subjects.
Priority is given to faster shutter speeds.
More on Photography
C ANTI-BLUR (Picture Stabilization)
Choose this mode for fast shutter speeds that
reduce blur caused by camera shake or subject
movement.
F PORTRAIT
Choose this mode for softtoned portraits with natural
skin tones.
29
Shooting Mode
I NIGHT
Shutter speeds as slow as 4 s
are used to record night and
twilight scenes. Use of a tripod
is recommended to prevent
camera shake.
D NATURAL LIGHT
Capture natural light indoors,
under low light, or where the
flash can not be used. The
flash turns off and sensitivity is
raised to reduce blur.
M BEACH
Choose for crisp, clear shots
that capture the brightness of
sunlit beaches.
30
L SNOW
Choose for crisp, clear shots
that capture the brightness of
scenes dominated by shining
white snow.
J FIREWORKS
Slow shutter speeds are used to
capture the expanding burst of
light from a firework. Press the
selector left or right to choose
from shutter speeds between
8 s and ½ s. Use of a tripod is recommended to
prevent blur. The flash turns off automatically.
K SUNSET
Choose this mode to record
the vivid colors in sunrises and
sunsets.
Shooting Mode
Q TEXT
Take clear pictures of text or
drawings in print. The camera
focuses in the macro range.
O PARTY
Capture indoor background
lighting under low-light conditions.
B MANUAL
Choose this mode for complete control of shooting settings, including sensitivity (pg. 56), exposure compensation (pg. 58), quality (pg. 57), and
white balance (pg. 69).
N MUSEUM
Choose where flash photography is prohibited or the sound
of the shutter may be unwelcome. The flash, speaker, and
self-timer lamp turn off automatically.
More on Photography
P FLOWER
Choose for vivid close-ups of
flowers. The camera focuses in
the macro range and the flash
turns off automatically.
1 Note
Photography may be prohibited altogether in some
settings. Obtain permission before shooting.
31
Playback Options
To view the most recent picture in the monitor,
press the H button.
100-0001
N
ISO 100
Choosing a Display Format
Press the DISP/BACK button to cycle through playback
display formats as shown below.
12 / 31 / 2050 10 : 00 AM
250
F3.3
More on Playback
Press the selector right to view pictures
in the order recorded, left to view pictures in reverse order. Keep the selector
pressed to scroll rapidly to the desired
frame.
Indicators displayed
Indicators hidden
100-0001
N
ISO 100
12 / 31 / 2050 10 : 00 AM
250
F3.3
2050
12/29
12/30
12/31
8/14
Sort by date
Multi-frame playback
1 Note
Pictures taken using other cameras are indicated by a h (“gift image”) icon during playback.
32
Playback Options
Playback Zoom
Multi-Frame Playback
Press T to zoom in on the picture currently displayed full frame in the monitor; press W to zoom
out. When the picture is zoomed in, the selector
can be used to view areas of the image not currently visible in the display.
To view pictures nine at a time, press the DISP/BACK
button until nine pictures are displayed in the
monitor.
Zoom indicator
Press DISP/BACK to exit zoom.
1 Note
The maximum zoom ratio varies with image size. Playback zoom is not available with pictures taken at an
image size of l.
Press the selector up or down to view more pictures. Use the selector to highlight images and
press MENU/OK to view the highlighted image full
frame.
More on Playback
Navigation
window shows
portion of image
currently displayed
in monitor
33
Playback Options
Sort by Date
Choose sort-by-date mode to view pictures taken on a selected date.
Press DISP/BACK until the sort-by-date
1 screen
is displayed.
Press the selector up or down to se4 lect
a date.
2050
the selector right to return to
5 Press
the sort-by-date display.
12/29
12/30
12/31
1/14
Use the selector to highlight the ar2 row
(s) at the top left corner of the
display.
Press the selector left to highlight
3 the
date.
2050
12/29
12/30
12/31
14
34
the selector to highlight images
6 Use
and press MENU/OK to view the highlighted image full frame.
I Deleting Pictures
The ERASE option in the playback menu can be used to delete still pictures and movies, increasing
the amount of space available on the memory card or in internal memory (for information on deleting
pictures in single-frame playback, see page 17). Note that deleted pictures can not be recovered. Copy
important pictures to a computer or other storage device before proceeding.
Press MENU/OK to display the play1 back
menu.
the selector up or down to
4 Press
highlight FRAME or ALL FRAMES.
PLAYBACK MENU
ERASE
RED EYE REMOVAL
SLIDE SHOW
MENU/OK to display options for
5 Press
the selected item (see pg. 36).
PRINT ORDER (DPOF)
PROTECT
Press the selector right to display de3 lete
options.
PLAYBACK MENU
More on Playback
the selector up or down to
2 Press
highlight ERASE.
2 Tips: Deleting Pictures
• When a memory card is inserted, pictures will be deleted from the memory card; otherwise, pictures will
be deleted from internal memory.
• Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (pg. 65).
• If a message appears stating that the selected images
are part of a DPOF print order, press MENU/OK to delete
the pictures.
ERASE
BACK
RED EYE REMOVAL FRAME
ALL FRAMES
SLIDE SHOW
PRINT ORDER (DPOF)
PROTECT
35
I Deleting Pictures
■ FRAME
FRAME:: Deleting Selected Images
Selecting FRAME displays the
dialog shown at right.
■ ALL FRAMES
FRAMES:: Deleting All Images
ALL OK?
Selecting ALL FRAMES dis- IT MAYERASE
TAKE A WHILE
plays the confirmation shown
at right.
ERASE OK?
YES
CANCEL
Press the selector left or right to scroll
through pictures and press MENU/OK to
delete the current picture (the picture
is deleted immediately; be careful not
delete the wrong picture).
Press DISP/BACK to exit when all the desired pictures have been deleted.
36
YES
Press MENU/OK to delete all unprotected pictures.
The dialog shown at right is
displayed during deletion.
Press DISP/BACK to cancel before all pictures have been
deleted (any pictures deleted
before the button was pressed
can not be recovered).
CANCEL
CANCEL
A Recording Movies
Shoot short movies at 30 frames per second. Sound is recorded via the built-in microphone; do not
cover the microphone during recording.
Press MENU/OK to display the shooting menu 2 Frame the scene using the zoom
1 and
select A SHOOTING MODE > A MOVIE
buttons.
(pg. 28).
12s
STANDBY
12s
STANDBY
Time available
is displayed in
monitor
Zoom indicator
Zoom can not be adjusted once recording begins.
Movies
Choosing the Frame Size
SHOOTING MENU
To choose the frame size,
SHOOTING MODE
4s
press MENU/OK and select
QUALITY
9s
SET-UP
C QUALITY. Choose m
(640 × 480 pixels) for better
quality, n (320 × 240 pixels) for longer movies. Press MENU/OK to return to
movie recording mode.
37
A Recording Movies
the shutter button all the way
3 Press
down to start recording.
Press the shutter button halfway to
4 end
recording. Recording ends automatically when the movie reaches
maximum length or memory is full.
REC
12s
Y REC and time
remaining are
displayed in monitor
1 Note
Focus is set when recording begins; exposure and
white balance are adjusted automatically throughout
recording. The color and brightness of the image may
vary from that displayed before recording begins.
38
2 Tip
There is no need to keep the shutter button pressed
during recording.
1 Note
Movies are recorded as monaural motion JPEG files
with a maximum file size of 2 GB and a minimum
length of 1 s. See page 92 for more information on recording times.
H Viewing Movies
During playback (pg. 32),
movies are displayed in the
monitor as shown at right.
The following operations can
be performed while a movie
is displayed:
Operation
Start/pause
playback
End
playback/
delete
100-006
Progress is shown in the monitor during playback.
15s
12 / 31 / 2050
PLAY
10 : 00 AM
Progress bar
STOP
PAUSE
2 Tip: Viewing Movies on a Computer
Copy movies to the computer before viewing.
3 Cautions
• Do not cover the speaker during playback.
• White vertical or dark horizontal streaks may appear
in movies containing very bright subjects. This is normal and does not indicate a malfunction.
Movies
Description
Press the selector down to start playback.
Press again to pause.
Press the selector up to end playback. If
playback is paused, pressing the selector
up will delete the current movie.
Press the selector right to advance, left to
Advance/ rewind. If playback is paused, the movie
rewind will advance or rewind one frame each
time the selector is pressed.
Press MENU/OK to pause playback and disAdjust play volume controls. Press the selector
volume up or down to adjust the volume; press
MENU/OK again to resume playback.
39
Viewing Pictures on TV
Connect the camera to a TV and tune the television to the video channel to show pictures to a group.
The supplied A/V cable connects as shown below.
Insert into A/V cable
connector
Connect yellow plug
to video-in jack
Connect white plug
to audio-in jack
Press H for about a second to turn the camera on. The camera monitor turns off and pictures and
movies are played back on the TV. Note that the camera volume controls have no effect on sounds
played on the TV; use the television volume controls to adjust the volume.
1 Notes
• Fully charge the battery before connecting the camera.
• Image quality drops during movie playback.
Connections
40
3 Caution
When connecting the A/V cable, be sure the connectors are fully inserted.
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
Printing Selected Pictures
Connecting the Camera
the supplied USB cable as shown and 1 Press the selector left or right to dis1 Connect
play a picture you wish to print.
turn the printer on.
the selector up or down to
2 Press
choose the number of copies (up to
99).
Repeat steps 1–2 to select additional
Press the H button for about a second to turn 3 pictures. Press MENU/OK to display a
2 the
camera on. a USB will be displayed in
the monitor, followed by the PictBridge display
shown below at right.
PRINT THESE FRAMES
TOTAL: 9 SHEETS
PICTBRIDGE
TOTAL: 00000
00 SHEETS
FRAME
OK
YES
CANCEL
SET
4 Press MENU/OK to start printing.
Connections
USB
confirmation dialog when settings
are complete.
41
Printing Pictures via USB
2 Tip: Printing the Date of Recording
To print the date of recording on pictures, press DISP/
BACK in steps 1–2 to display the PictBridge menu (see
“Printing the DPOF Print Order,” below). Press the selector up or down to highlight PRINT WITH DATE r
and press MENU/OK to return to the PictBridge display
(to print pictures without the date of recording, select
PRINT WITHOUT DATE).
1 Note
If no pictures are selected when the MENU/OK button is
pressed, the camera will print one copy of the current
picture.
Printing the DPOF Print Order
To print the print order created with K PRINT
ORDER (DPOF) in the playback menu (pg. 44):
In the PictBridge display, press DISP/
1 BACK
to open the PictBridge menu.
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
the selector up or down to
2 Press
highlight b PRINT DPOF.
MENU/OK to display a confirma3 Press
tion dialog.
PRINT DPOF OK?
TOTAL: 9 SHEETS
YES
42
CANCEL
Printing Pictures via USB
4 Press MENU/OK to start printing.
During Printing
The message shown at right is
PRINTING
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
CANCEL
on the printer, printing may end
before the current picture has printed).
If printing is interrupted, press H to turn the camera
off and then on again.
1 Notes
• Fully charge the battery before connecting the camera.
• Print pictures from internal memory or a memory
card that has been formatted in the camera.
• If the printer does not support date printing, the
PRINT WITH DATE r option will not be available in
the PictBridge menu and the date will not be printed
on the pictures in the DPOF print order.
• Default printer page size and print quality settings are
used when printing via direct USB connection.
Disconnecting the Camera
Confirm that “PRINTING” is not displayed in the monitor and press H to turn the camera off. Disconnect
the USB cable.
Connections
43
Printing Pictures via USB
Creating a DPOF Print Order
The K PRINT ORDER (DPOF) option in the playback menu can be used to create a digital “print
order” for PictBridge-compatible printers (pg. 42)
or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is standard that allows pictures to be printed from
“print orders” stored in internal memory or
on a memory card. The information in the order includes the pictures to be printed and the number of
copies of each picture.
■ WITH DATE r// WITHOUT DATE
To modify the DPOF print order, select K PRINT
ORDER (DPOF) in the playback menu and press
the selector up or down to highlight WITH
DATE r or WITHOUT DATE.
PLAYBACK MENU
ERASE
WITH DATE
RED EYE REMOVALWITHOUT DATE
RESET ALL
SLIDE SHOW
PRINT ORDER (DPOF)
PROTECT
WITH DATE r: Print date of
recording on pictures.
WITHOUT DATE: Print pictures without
date.
Press MENU/OK and follow the steps below.
Press the selector left or right to dis1 play
a picture you wish to include in
or remove from the print order.
44
Printing Pictures via USB
the selector up or down to
2 Press
choose the number of copies (up to
99). To remove a picture from the
order, press the selector down until
the number of copies is 0.
PRINT ORDER (DPOF)
DPOF: 00001
Total number of prints
The total number of prints is dis4 played
in the monitor. Press MENU/
OK to exit.
The pictures in the current
print order are indicated by a
b icon during playback.
100-0001
N
ISO 100
12 / 31 / 2050
10 : 00 AM
Number of copies
01 SHEETS
FRAME
SET
Repeat steps 1–2 to complete the
3 print
order. Press MENU/OK to save
the print order when settings are
complete, or DISP/BACK to exit without changing the print order.
Connections
45
Printing Pictures via USB
■ RESET ALL
To cancel the current print order, select RESET ALL in the K PRINT ORDER (DPOF)
menu. The confirmation shown at right will be displayed; press MENU/OK to remove
all pictures from the order.
1 Notes
• Remove the memory card to create or modify a print order for the pictures in internal
memory.
• Print orders can contain a maximum of 999 pictures.
• If a memory card is inserted containing a print order created by another camera, the message shown at right will be displayed. Pressing MENU/OK cancels the print order; a new print
order must be created as described above.
RESET DPOF OK?
YES
RESET DPOF OK?
YES
46
CANCEL
NO
Viewing Pictures on a Computer
The supplied FinePixViewer software can be used to copy pictures to a computer, where they can be
stored, viewed, organized, and printed. Before proceeding, install FinePixViewer as described below.
Do NOT connect the camera to the computer until installation is complete.
Installing FinePixViewer
FinePixViewer is available in Windows and Macintosh versions. Installation instructions for Windows
are on pages 47–49, those for the Macintosh on pages 50–51.
Installing FinePixViewer: Windows
Confirm that the computer meets the following system requirements:
1
Preinstalled versions of Windows Vista, Windows XP Home Edition (Service Pack 2), Windows XP Professional
(Service Pack 2), Windows 2000 Professional (Service Pack 4), Windows Me, or Windows 98SE
• Windows Vista: 800 MHz Pentium 4 or better (3 GHz Pentium 4 or better recommended)
CPU • Windows XP: 800 MHz Pentium 4 or better (2 GHz Pentium 4 or better recommended)
• Other versions of Windows: 200 MHz Pentium or better
• Windows Vista: 512 MB or more (1 GB or more recommended)
RAM • Windows XP: 512 MB or more
• Other versions of Windows: 128 MB or more
Free disk A minimum of 450 MB required for installation with 600 MB available when FinePixViewer is running (15 GB or
space more recommended under Windows Vista, 2 GB or more recommended under Windows XP)
Video 800 × 600 pixels or more with 16-bit color or better (1,024 × 768 pixels or more with 32-bit color recommended)
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
Other • Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet connection and e-mail software required to use e-mail option
OS
Connections
3 Caution
Other versions of Windows are not supported. Operation is not guaranteed on home-built computers or
computers that have been upgraded from earlier versions of Windows.
47
Viewing Pictures on a Computer
the computer. If you are using Windows 2000 Professional, Windows XP, or Windows Vista, log
2 Start
in to an account with administrator privileges before proceeding.
3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows Vista
If an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed;
click Allow.
The installer will start automatically; click Installing FinePixViewer and follow the on-screen instructions to install FinePixViewer S (Windows 2000, Windows XP, or Windows Vista), or FinePixViewer (other versions of Windows). Note that the Windows CD may be required during installation.
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer from the Start menu (Windows Vista/XP) or double-click the My Computer icon on the desktop (other versions of Windows), then
double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.exe.
48
Viewing Pictures on a Computer
If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com4 plete
installation.
When prompted, click Restart to restart the computer. Remove the installer CD from the CD-ROM
5 drive
and store the CD in a dry location out of direct sunlight in case you need to re-install the
software. The version number is printed at the top of the CD label for reference when updating the
software or contacting customer support.
Installation is now complete. Proceed to “Connecting the Camera” on page 52.
Connections
49
Viewing Pictures on a Computer
Installing FinePixViewer: Macintosh
Confirm that the computer meets the following system requirements:
1
CPU
PowerPC or Intel
Preinstalled version of Mac OS X version 10.3.9–10.4.11
OS
(as of August 1, 2008; visit http://www.fujifilm.com for more information)
RAM
256 MB or more
Free disk space A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running
Video
800 × 600 pixels or more with thousands of colors or better
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
Other
• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet
connection and e-mail software required to use e-mail option
After starting the computer and quitting any applications that may be running, insert the installer
2 CD
in a CD-ROM drive. Double-click the FinePix CD icon on the desktop and double-click Installer
for Mac OS X.
installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter an
3 An
administrator name and password when prompted and click OK, then follow the on-screen instructions to install FinePixViewer. Click Exit to quit the installer when installation is complete.
50
Viewing Pictures on a Computer
the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
4 ifRemove
Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software. The version number is
printed at the top of the CD label for reference when updating the software or contacting customer
support.
Select Applications in the Finder Go menu to open the applications folder.
5 Double-click
the Image Capture icon and select Preferences… from the Image Capture application menu.
The Image Capture preferences dialog will be displayed. Choose Other… in
the When a camera is connected, open menu, then select FPVBridge in the
“Applications/FinePixViewer” folder and click Open.
Installation is now complete. Proceed to “Connecting the Camera” on page 52.
Connections
Select Quit Image Capture from the Image Capture application menu.
51
Viewing Pictures on a Computer
Connecting the Camera
If the pictures you wish to copy are stored on a 3 Press the H button for about a second to turn
1 memory
card, insert the card into the camera
the camera on. FinePixViewer will start auto(pg. 8). If no card is inserted, pictures will be
copied from internal memory.
3 Caution
Loss of power during transfer could result in loss of
data or damage to internal memory or the memory
card. Fully charge the battery before connecting
the camera.
Turn the camera off and connect the supplied
2 USB
cable as shown, making sure the connectors are fully inserted. Connect the camera directly to the computer; do not use a USB hub
or keyboard.
matically and the “Save Image Wizard” will be
displayed. Follow the on-screen instructions
to copy pictures to the computer. To exit without copying pictures, click CANCEL.
3 Caution
If FinePixViewer does not start automatically, the
software may not be correctly installed. Disconnect the camera and reinstall the software.
For more information on using FinePixViewer,
select How to Use FinePixViewer in the
FinePixViewer Help menu.
1 Note
The camera will not turn off automatically while connected to a computer.
52
Viewing Pictures on a Computer
Disconnecting the Camera
After confirming that the indicator lamp is out, follow
the on-screen instructions to turn the camera off and
disconnect the USB cable.
Uninstalling FinePixViewer
Only uninstall FinePixViewer before reinstalling the
software or when it is no longer required. After quitting FinePixViewer and disconnecting the camera,
drag the “FinePixViewer” folder from “Applications”
into the Trash and select Empty Trash in the Finder
menu (Macintosh), or open the control panel and use
“Programs and Features” (Windows Vista) or “Add/
Remove Programs” (other versions of Windows) to
uninstall FinePixViewer and associated applications.
Under Windows, one or more confirmation dialogs
may be displayed; read the contents carefully before
clicking OK.
Connections
3 Cautions
• Use only memory cards that have been formatted
in the camera and contain pictures taken with the
camera. If a memory card containing a large number of images is inserted, there may be a delay before
FinePixViewer starts and FinePixViewer may be unable to import or save images. Use a memory card
reader to transfer pictures.
• Make sure the indicator lamp is out before turning the
camera off or disconnecting the USB cable. Failure to
observe this precaution could result in loss of data or
damage to internal memory or the memory card.
• Disconnect the camera before inserting or removing
memory cards.
• In some cases, it may not be possible to access pictures saved to a network server using FinePixViewer
in the same way as on a standalone computer.
• The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.
53
The Shooting Menu
The shooting menu is used to adjust settings for a wide range of shooting conditions.
Using the Shooting Menu
Press MENU/OK to display the shoot1 ing
menu.
Press the selector right to display op3 tions
for the highlighted item.
SHOOTING MENU
SHOOTING MODE
SHOOTING MENU
AUTO
FACE DETECTION
FACE DETECTION
ISO
QUALITY
CONTINUOUS
AUTO
N
OFF
1 Note
The options displayed in the shooting menu vary
depending on the shooting mode.
the selector up or down to
2 Press
highlight the desired menu item.
Menus
54
SHOOTING MODE
ISO
QUALITY
TOP 3
OFF
AUTO
N
OFF
CONTINUOUS
the selector up or down to
4 Press
highlight the desired option.
MENU/OK to select the high5 Press
lighted option.
The Shooting Menu
Shooting Menu Options
Menu item
A SHOOTING MODE
P FACE DETECTION
B ISO
C QUALITY
D EXP. COMPENSATION
E WHITE BALANCE
G CONTINUOUS
H SET-UP
Description
Choose a shooting mode according to the type
of subject (pg. 28).
Turn Intelligent Face Detection and red-eye removal on or off (pg. 18).
Adjust ISO sensitivity (pg. 56). Choose higher
values when the subject is poorly lit.
Choose image size and quality (pg. 57).
Adjust exposure for bright, dark, or high-contrast
scenes (pg. 58).
Adjust color for different light sources (pg. 59).
Shoot a series of pictures (pg. 60).
Perform basic camera setup such as choosing
a language and setting the time and date (pg.
70).
Options
AUTO/B/C/F/G/H/I/
D/M/L/J/K/P/O/N/
Q/A/B
R ON V ON /
R ON V OFF / OFF
AUTO/ 1600 / 800 / 400 / 200 /
100 / 64
g F/g N/h/i/k/
l
–2 EV to +2 EV in increments
of 1/3 EV
AUTO/a/b/c/d/e/f
y/OFF
Q/R/S/T
Default
AUTO
R ON
V ON
AUTO
gN
±0
AUTO
OFF
—
Menus
55
The Shooting Menu
B ISO
Control the camera’s sensitivity to light. Higher values can be used to reduce blur when lighting is
poor; note, however, that mottling may appear in pictures taken at high sensitivities. If AUTO is selected, the camera will adjust sensitivity automatically in response to shooting conditions.
In shooting modes other than B, sensitivity is set to AUTO; other values can not
be selected. Settings other than AUTO are shown by an icon in the monitor.
56
M
N
17
ISO 100
The Shooting Menu
C QUALITY
Choose the size and quality at which still pictures
are recorded. Large pictures can be printed at
large sizes with no drop in quality; small pictures
require less memory, allowing more pictures to
be recorded.
Aspect Ratio
Pictures taken at an image quality setting of h
have an aspect ratio of 3 : 2, the same as a frame of
35-mm film. Pictures taken at other settings have an
aspect ratio of 4 : 3.
AUTO
Option
gF
gN
h
i
k
Prints at sizes up to
28 × 21 cm/10.8 × 8.2 in. (g) or 28 × 18 cm/
10.8 × 7.3 in. (h). Choose g F for highquality prints, h for an aspect ratio of 3 : 2.
20 × 15 cm (7.7 × 5.8 in.)
14 × 10 cm (5.3 × 4 in.)
5 × 4 cm (2 × 1.5 in.). Suited to e-mail or the
l
web.
AUTO
4:3
3:2
1 Note
Image quality is not reset when the camera is turned
off or another shooting mode is selected.
The number of pictures that can be taken at current settings (pg. 92) is displayed to the right of
the image quality icon in the monitor.
Menus
57
The Shooting Menu
D EXP. COMPENSATION
Use exposure compensation when photographing very bright, very dark, or high-contrast subjects.
Choose positive (+) values
to increase exposure
Choosing an Exposure Compensation Value
• Backlit subjects: choose values
from +2/3 EV to +12/3 EV (for an
explanation of the term “EV”,
see the Glossary on page 90)
• Highly reflective subjects or very
bright scenes (e.g., snowfields):
+1 EV
Choose negative (–) values
to reduce exposure
• Scenes that are mostly sky: +1 EV
• Spotlit subjects (particularly if photographed against
dark backgrounds): –2/3 EV
• Subjects with low reflectivity (pine trees or dark-colored foliage): –2/3 EV
1 Notes
• Exposure compensation is available in B mode only.
• At settings other than ±0, a i icon is displayed in the monitor. Exposure compensation is not reset when the
camera is turned off; to restore normal exposure control, choose a value of ±0. Exposure compensation is disabled if the flash fires when set to AUTO or q (auto with red-eye reduction); when the flash is set to T or r,
exposure compensation is disabled if the subject is dark.
58
The Shooting Menu
E WHITE BALANCE
For natural colors, choose a setting that matches the light source (for an explanation of “white balance,”
see the Glossary on page 90).
Option
AUTO
a
b
c
d
e
f
Description
White balance adjusted automatically.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
If AUTO does not produce the desired results (for example, when taking close-ups), choose the option
that matches the light source.
1 Notes
• This option is available in B mode only.
• Auto white balance is used with the flash. Turn the flash off (pg. 24) to take pictures at other settings.
• Results vary with shooting conditions. Play pictures back after shooting to check colors in the monitor.
Menus
59
The Shooting Menu
G CONTINUOUS
Select y TOP 3 to capture motion in a series of pictures. The camera takes up to three pictures while
the shutter-release button is pressed.
1 Notes
• The flash turns off automatically (pg. 24), and focus and exposure are determined by the first frame in each
series. The previously-selected flash mode is restored when OFF is selected for G CONTINUOUS.
• Frame rate varies with shutter speed.
STORING
• The number of pictures that can be recorded depends on the memory available. Additional time may be required to record pictures when shooting ends. The pictures are displayed
in the monitor while recording is in progress.
60
The Playback Menu
The playback menu is used to manage the pictures in internal memory or on the memory card.
Using the Playback Menu
1
Press H to enter playback mode
(pg. 32).
Press the selector right to display op4 tions
for the highlighted item.
PLAYBACK MENU
ERASE
Press MENU/OK to display the play2 back
menu.
PLAYBACK MENU
ERASE
RED EYE REMOVAL
SLIDE SHOW
BACK
RED EYE REMOVAL FRAME
ALL FRAMES
SLIDE SHOW
PRINT ORDER (DPOF)
PROTECT
the selector up or down to
5 Press
highlight the desired option.
PRINT ORDER (DPOF)
PROTECT
the selector up or down to
3 Press
highlight the desired menu item.
MENU/OK to select the high6 Press
lighted option.
Menus
61
The Playback Menu
Playback Menu Options
The following options are available:
Option
IERASE
URED-EYE REMOVAL
JSLIDE SHOW
KPRINT ORDER (DPOF)
LPROTECT
MCOPY
NIMAGE ROTATE
OTRIMMING
HSET-UP
62
Description
Delete all or selected pictures (pg. 35).
Create copies with reduced red eye (pg. 63).
View pictures in a slide show (pg. 64).
Select pictures for printing on DPOF- and PictBridge-compatible devices (pg. 44).
Protect pictures from accidental deletion (pg. 65).
Copy pictures between internal memory and a memory card (pg. 66).
Rotate pictures (pg. 68).
Create cropped copies of pictures (pg. 69).
Perform basic camera setup (pg. 70).
The Playback Menu
U RED EYE REMOVAL
This option is used with pictures taken using Intelligent Face Detection to create copies that have been
processed to remove red eye.
the picture back in the monitor (pictures 2 Press MENU/OK. The message shown
1 Play
taken with Intelligent Face Detection are inbelow at left will be displayed while
dicated by a R icon) and select U RED EYE
REMOVAL in the playback menu (pg. 61).
REMOVAL OK?
the camera analyses the image; if
red-eye is detected, the message shown below at right will be displayed while the camera
processes the image to create a copy with reduced red-eye.
DETECTING
YES
REMOVING
CANCEL
CANCEL
Menus
1 Notes
• Red eye may not be removed if the camera is unable to detect a face or the face is in profile. Results may differ
depending on the scene. Red eye can not be removed from pictures that have already been processed using
red-eye removal or pictures created with other devices.
• The amount of time needed to process the image varies with the number of faces detected.
• Copies created with U RED EYE REMOVAL are indicated by a d icon during playback.
63
The Playback Menu
J SLIDE SHOW
PLAYBACK MENU
View pictures in an automated
ERASE
NORMAL
slide show. Choose the type RED EYE REMOVAL NORMAL
WIPE
SLIDE SHOW
of show and press MENU/OK PRINT ORDER (DPOF) WIPE
to start. Press DISP/BACK at PROTECT
any time during the show to
view on-screen help. When a movie is displayed,
movie playback will begin automatically, and the
slide show will continue when the movie ends.
The show can be ended at any time by pressing
MENU/OK.
1 Note
The camera will not turn off automatically while a slide
show is in progress.
64
Option
Description
Press selector left or right to go back or
skip ahead one frame. Select WIPE for
WIPE
wipe transitions between frames.
NORMAL R As above, except that camera automatically zooms in on faces selected with
WIPE R
Intelligent Face detection (pg. 18).
NORMAL
The Playback Menu
L PROTECT
Protect pictures from accidental deletion. The following options are available.
■ FRAME
Protect selected pictures.
Press the selector left or right to dis1 play
the desired picture.
PROTECT OK?
YES
UNPROTECT OK?
CANCEL
Picture not protected
YES
CANCEL
Protected picture
MENU/OK to protect the picture.
2 Press
If the picture is already protected,
steps 1–2 to protect addi3 Repeat
tional images. Press DISP/BACK to exit
when the operation is complete.
■ RESET ALL
Press MENU/OK to remove protection from all pictures, or
press DISP/BACK to exit without
changing picture status.
SET ALL OK?
IT MAY TAKE A WHILE
YES
CANCEL
RESET ALL OK?
IT MAY TAKE A WHILE
YES
CANCEL
If the number of pictures affected is very large, the display at right will appear in the
monitor while the operation is
CANCEL
in progress. Press DISP/BACK to
exit before the operation is complete.
3 Caution
Protected pictures will be deleted when the memory
card or internal memory is formatted (pg. 75).
Menus
pressing MENU/OK will remove protection from the image.
■ SET ALL
Press MENU/OK to protect all
pictures, or press DISP/BACK to
exit without changing picture
status.
65
The Playback Menu
M COPY
Copy pictures between internal memory and a memory card.
Press the selector up or down to
1 highlight
q INTERNAL MEMORY
t p CARD (copy pictures from
internal memory to the memory card) or
p CARD t q INTERNAL MEMORY (copy
pictures from a memory card to internal memory).
Press the selector right to display op2 tions
for the highlighted item.
COPY
INTERNAL MEMORY
66
CARD
CARD
CARD
FRAME
INTERNAL MEMORY
ALL FRAMES
NEXT
CANCEL
the selector up or down to
3 Press
highlight FRAME or ALL FRAMES.
4 Press MENU/OK.
2 Tip: Copying Pictures Between Memory Cards
To copy pictures between two memory cards, insert
the source card and copy the pictures to internal memory, then remove the source card, insert the destination
card, and copy the pictures from internal memory.
The Playback Menu
■ FRAME
Copy selected frames.
COPY OK?
100-0001
YES
Press the selector left or right to dis1 play
the desired picture.
CANCEL
■ ALL FRAMES
Press MENU/OK to copy all pictures, or press DISP/BACK to exit
without copying pictures.
COPY ALL OK?
100-0001
IT MAY TAKE
A WHILE
YES
CANCEL
3 Cautions
• Copying ends when the destination is full.
• DPOF print information is not copied (pg. 44).
2 Press MENU/OK to copy the picture.
Repeat steps 1–2 to copy additional
3 images.
Press DISP/BACK to exit when
the operation is complete.
Menus
67
The Playback Menu
N IMAGE ROTATE
By default, pictures taken in IMAGE ROTATE
tall orientation are displayed
in wide orientation. Use this
option to display pictures in
SET
CANCEL
the correct orientation in the
monitor. It has no effect on pictures displayed on
a computer or other device.
Press the selector down to rotate the
1 picture
90 ° clockwise, up to rotate
the picture 90 ° counterclockwise.
1 Notes
• Protected pictures can not be rotated. Remove protection before rotating pictures (pg. 65).
• The camera may not be able to rotate pictures created with other devices.
To rotate a picture, play the picture back and select N IMAGE ROTATE in the playback menu
(pg. 61).
Press MENU/OK to confirm the opera2 tion
(to exit without rotating the picture, press DISP/BACK).
The next time the picture is played back, it will
automatically be rotated.
68
The Playback Menu
O TRIMMING
To create a cropped copy of a picture, play the picture back and select O TRIMMING in the playback
menu (pg. 61).
Press the zoom buttons to zoom in and out 2 Press MENU/OK. A confirmation dia1 and
use the selector to scroll the picture unlog will be displayed.
til the desired portion is displayed (to exit to
single-frame playback without creating a
cropped copy, press DISP/BACK).
Zoom indicator
TRIMMING
YES
Navigation
window shows
portion of image
currently displayed
in monitor
REC OK?
REC
CANCEL
Copy size (i, k, or l; see page 57) is
shown at the top. Larger crops produce larger
copies; all copies have an aspect ratio of 4 : 3.
CANCEL
If the size is l, OK is displayed in yellow.
MENU/OK to save the cropped
3 Press
copy to a separate file.
Menus
69
The Setup Menu
Using the Setup Menu
the setup menu.
1 Display
1.1 Press MENU/OK to display
the
menu for the current mode.
1.2 Press the selector up or down
to highlight H SET-UP.
1.3 Press the selector right to display the setup menu.
Adjust settings.
3 3.1
Press the selector up or down
to highlight a menu item.
3.2 Press the selector right to display options for the highlighted
item.
SET-UP
FORMAT
/LANG
SET-UP
IMAGE DISP.
FRAME NO.
DIGITAL ZOOM
LCD POWER SAVE
1.5
CONT.
OFF
ON
a page.
2 Choose
2.1 Press the selector left or right to
choose a page.
2.2 Press the selector down to enter the menu.
70
AUTO POWER OFF
TIME DIFFERENCE
VIDEO SYSTEM
5 MIN
ENGLISH
2 MIN
2 MIN
OFF
NTSC
3.3 Press the selector up or down
to highlight an option.
3.4 Press MENU/OK to select the
highlighted option.
The Setup Menu
Setup Menu Options
Menu item
Menus
Description
Options
Default
Choose how long pictures are displayed after
a IMAGE DISP.
3 SEC / 1.5 SEC
1.5 SEC
shooting (pg. 72).
Q b FRAME NO.
Choose how files are named (pg. 73).
CONTINUOUS / RENEW
CONTINUOUS
d DIGITAL ZOOM
Enable or disable digital zoom (pg. 74).
ON / OFF
OFF
e LCD POWER SAVE Enable or disable monitor power saving (pg. 74).
ON / OFF
ON
f DATE/TIME
Set the camera clock (pg. 12).
—
—
g BEEP VOLUME
Adjust the volume of camera controls.
T (high) / U (mid) /
U
R h SHUTTER VOLUME Adjust the volume of the shutter sound.
V (low) / W OFF (mute)
i PLAYBACK VOLUME Adjust the volume for movie playback (pg. 74).
—
—
j LCD BRIGHTNESS Control the brightness of the monitor (pg. 74).
–5 – +5
0
Format internal memory or memory cards (pg.
k FORMAT
—
—
75).
lr
Choose a language (pg. 12).
See page 95
ENGLISH
S m AUTO POWER OFF Choose the auto power off delay (pg. 75).
5 MIN / 2 MIN / OFF
2 MIN
n TIME DIFFERENCE Set the clock to local time (pg. 76).
Y/X
Y
Choose a video mode for connection to a TV
o VIDEO SYSTEM
NTSC / PAL
—
(pg. 40).
Reset all settings except DATE/TIME, TIME DIFFERENCE, and VIDEO SYSTEM to default values. A
T p RESET
confirmation dialog will be displayed, press the
—
—
selector left or right to highlight OK and press
MENU/OK.
71
The Setup Menu
a IMAGE DISP.
Choose how long pictures are displayed in the monitor after shooting.
• 3 SEC: Pictures are displayed for about 3 s before being recorded to the memory card.
• 1.5 SEC: Pictures are displayed for about 1.5 s before being recorded to the memory card.
1 Note
The colors displayed at settings of 3 SEC and 1.5 SEC may differ from those in the final picture.
72
The Setup Menu
b FRAME NO.
New pictures are stored in image files named using a four-digit file numFrame
number
ber assigned by adding one to the last file number used. The file num100-0001
ber is displayed during playback as shown at right. FRAME NO. controls
File
whether file numbering is reset to 0001 when a new memory card is innumber
serted or the current memory card or internal memory is formatted.
Directory
• CONTINUOUS: Numbering continues from the last file number used or the
number
first available file number, whichever is higher. Choose this option to
reduce the number of pictures with duplicate file names.
• RENEW: Numbering is reset to 0001 after formatting or when a new memory card is inserted.
1 Notes
• If the frame number reaches 999-9999, the shutter release will be disabled (pg. 88).
• Selecting p RESET (pg. 71) does not reset frame numbering.
• Frame numbers for pictures taken with other cameras may differ.
Menus
73
The Setup Menu
d DIGITAL ZOOM
If ON is selected, pressing T at the maximum optical zoom position will trigger digital zoom, further
magnifying the image. To cancel digital zoom,
zoom out to the minimum digital zoom position
and press W.
i PLAYBACK VOLUME
Press the selector up or down
to choose volume for movie
playback and press MENU/OK to
select.
AUTO
Zoom
indicator
Zoom indicator,
DIGITAL ZOOM off
W
Zoom indicator,
DIGITAL ZOOM on
T W
Optical zoom (up to 3 ×)
Optical zoom
(up to 3 ×)
T
Digital
zoom
3 Caution
Digital zoom produces lower quality images than optical zoom.
74
e LCD POWER SAVE
If ON is selected, the monitor will dim to save
power if no operations are performed for about
eight seconds. Full brightness can be restored by
pressing the shutter button halfway. The monitor
does not dim in movie mode or during playback.
j LCD BRIGHTNESS
Press the selector up or down
to choose monitor brightness
and press MENU/OK to select.
VOLUME
7
SET
CANCEL
LCD BRIGHTNESS
0
SET
CANCEL
The Setup Menu
k FORMAT
FORMAT
Format internal memory or
FORMAT OK?
a memory card. If a memory ERASE ALL DATA
card is inserted in the camera,
OK
CANCEL
p will be displayed in the diaSET
log shown at right and this option will format the memory card. If no memory
card is inserted, q will be displayed and this option will format internal memory. Press the selector left to highlight OK and press MENU/OK to begin formatting.
3 Cautions
• All data—including protected pictures—will be deleted. Be sure important files have been copied to a
computer or other storage device.
• Do not open the battery cover during formatting.
m AUTO POWER OFF
Choose the length of time before the camera
turns off automatically when no operations are
performed. Shorter times increase battery life; if
OFF is selected, the camera must be turned off
manually. Note that regardless of the option selected, the camera will not turn off automatically
when connected to a printer (pg. 41) or computer
(pg. 52) or when a slide show is in progress (pg.
64).
2 Tip: Reactivating the Camera
To reactivate the camera after it has turned off automatically, press the J button or press the H
button for about a second (pg. 11).
Menus
75
The Setup Menu
n TIME DIFFERENCE
When travelling, use this option to switch the camera clock instantly from your home time zone to the
local time at your destination.
the difference between local time
1 Specify
and your home time zone.
1.1 Press the selector up or down
to highlight X LOCAL.
1.2 Press the selector right to display the time difference.
TIME DIFFERENCE
12 / 31 / 2050 10:00 AM
12 / 31 / 2050 10:00 AM
00
:
Switch between local time and your home
2 time
zone.
To set the camera clock to local time, highlight X LOCAL and press MENU/OK. To set
the clock to the time in your home time
zone, select Y HOME. If X LOCAL is selected, X will be displayed in the monitor
for three seconds after the camera enters
shooting mode, and the date will be displayed in yellow.
00
AUTO
SET
CANCEL
1.3 Press the selector left or right
to highlight +, –, hours, or minutes; press up or down to edit.
The minimum increment is 15
minutes.
1.4 Press MENU/OK when settings
are complete.
76
12 / 31 / 2050
10 : 00 AM
After changing time zones, check that the
date and time are correct.
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers. The following accessories were available as of August 2008.
■ Computer Related
■ Audio/Visual
TV (available from thirdparty suppliers)
USB
Computer (available from
third-party suppliers)
Audio/visual
output
PC card slot
■ Printing
xD-Picture Card
DPC-AD PC Card Adapter
USB
SD/SDHC
memory card
DPC-C
CF card slot or card reader
F
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
for
xD-P
icture
Card
Printer (available
from third-party
suppliers)
Technical Notes
PictBridge-compatible printer
(available from third-party
suppliers)
DPC-CF CompactFlash™
Card Adapter
77
Optional Accessories
Accessories from FUJIFILM
As of August 2008, the following optional accessories were available from FUJIFILM. For the latest information on the accessories available in your region, check with your local FUJIFILM representative or
visit http://www.fujifilm.com/products/digital_cameras/index.html.
• xD-Picture Cards: Choose from 128 MB, 512 MB, 1 GB, and 2 GB cards. Both type M and type
H xD-Picture Cards can be used; note, however, that type H cards may not be compatible
with accessories such as USB drives. The card type can be determined from the model
number: for example, “DPC-M2GB” indicates a type M card.
• NP-45 rechargeable Li-ion battery (supplied): Additional NP-45 slimline batteries can be purchased as required.
• BC-45 battery charger: Replacement battery chargers can be purchased as required. The
BC-45 charges an NP-45 battery in about 180 minutes at +23 °C (+73 °F).
• DPC-AD PC card adapter: Allows an xD-Picture Card or a 3.3 V SmartMedia card to function as
a PC Card Standard-compliant ATA (PCMCIA 2.1) type II PC card.
• DPC-CF CompactFlash™ card adapter: Allows an xD-Picture Card to function as a CompactFlash card. The DPC-AD and DPC-CF can not be used with SD memory cards.
78
DPC-C
F
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
for
xD-P
icture
Card
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
■ Water and Sand
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.
■ Condensation
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If this
occurs, turn the camera off and wait an hour before turning it on again. If condensation forms on
the memory card, remove the card and wait for
the condensation to dissipate.
Cleaning
Use a blower to remove dust from the lens and
monitor, then gently wipe with a soft, dry cloth.
Any remaining stains can be removed by wiping
gently with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning fluid
has been applied. Care should be taken to avoid
scratching the lens or monitor. The camera body
can be cleaned with a soft, dry cloth. Do not use
alcohol, thinner, or other volatile chemicals.
Technical Notes
Storage and Use
If the camera will not be used for an extended period, remove the battery and memory card. Do
not store or use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very high temperatures, such as in a closed vehicle on a sunny day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic fields, such as near
a broadcasting antenna, power line, radar emitter, motor, transformer, or magnet
• in contact with volatile chemicals such as pesticides
• next to rubber or vinyl products
Travelling
Keep the camera in your carry-on baggage.
Checked baggage may suffer violent shocks that
could damage the camera.
79
Troubleshooting
Power and Battery
Problem
Possible cause
The battery is exhausted.
The camera does
not turn on.
The battery is not in the correct orientation.
The battery-chamber cover is not latched.
Power
supply
The battery is cold.
The battery runs
down quickly.
There is dirt on the battery terminals.
The battery has been charged many times.
Troubleshooting
80
The camera turns
off suddenly.
Charging does
not start.
Charging is slow.
Battery
charger The charging
lamp lights, but
the battery does
not charge.
The battery is exhausted.
The battery is not correctly inserted.
The battery is not in the correct orientation.
The temperature is low.
There is dirt on the battery terminals.
The battery has been charged many times.
Solution
Page
Charge the battery or insert a fully-charged
4, 6
spare battery.
Re-insert the battery in the correct orientation. 6
Latch the battery-chamber cover.
7
Warm the battery by placing it in a pocket or
other warm place and re-insert it in the camera v
immediately before taking a picture.
Clean the terminals with a soft, dry cloth.
—
The battery has reached the end of its charging
—
life. Purchase a new battery.
Charge the battery or insert a fully-charged
4, 6
spare battery.
Re-insert the battery in the charger.
4
Re-insert the battery in the correct orientation. 4
Charge the battery at room temperature.
v
Clean the terminals with a soft, dry cloth.
—
The battery has reached the end of its charging
life. Purchase a new battery. If the battery still —
fails to charge, contact your FUJIFILM dealer.
Troubleshooting
Menus and Displays
Problem
Possible cause
Solution
Menus and displays are English is not selected for the l r
Select ENGLISH.
not in English.
option in the setup menu.
Page
12
Shooting
Problem
Possible cause
Memory is full.
Taking
pictures
Memory is not formatted.
No picture is
taken when the There is dirt on the memory card contacts.
shutter button is The memory card is damaged.
pressed.
The battery is exhausted.
The camera has turned off automatically.
The flash has fired.
The subject is close to the camera.
The camera does
The subject is far away from the camera.
not focus.
The subject is not suited to autofocus.
Macro mode is The camera is in F, G, H, I, M, L, J,
Close-ups
not available.
K, O, or A mode.
Focus
The monitor may darken while the flash
charges. Wait for the flash to charge.
Select macro mode.
Cancel macro mode.
Use focus lock.
Choose a different shooting mode.
Page
8, 35
75
—
8
4, 6
11, 75
24
23
21
28
Troubleshooting
The monitor
goes dark after
shooting.
Solution
Insert a new memory card or delete pictures.
Format the memory card or internal memory.
Clean the contacts with a soft, dry cloth.
Insert a new memory card.
Charge the battery or insert a fully-charged
spare battery.
Turn the camera on.
81
Troubleshooting
Problem
Face detection
not available.
Intelligent
No face is deFace
tected.
Detection
Wrong subject
selected.
The flash does
not fire.
Flash
Movies
82
Some flash
modes are not
available.
The flash does
not fully light the
subject.
Recording ends
unexpectedly.
Possible cause
The camera is in G, H, J, P, Q, or A
mode.
The subject’s face is obscured by sunglasses,
a hat, long hair, or other objects.
The subject’s face occupies only a small area
of the frame.
The subject’s head is tilted or horizontal.
The camera is tilted.
The subject’s face is poorly lit.
The selected subject is closer to the center of
the frame than the main subject.
The flash is charging.
B, G, D, J, P, N, or A mode is selected.
The battery is exhausted.
Solution
Choose a different shooting mode.
Page
28
Remove the obstructions.
Change the composition so that the subject’s
face occupies a larger area of the frame.
Ask the subject to hold their head straight.
Hold the camera straight.
Shoot in bright light.
Recompose the picture or turn face detection
off and frame the picture using focus lock.
Wait for the flash to charge.
18
14
—
Choose a different shooting mode.
28
21
16
Charge the battery or insert a fully-charged
4, 6
spare battery.
Select OFF for G CONTINUOUS.
60
Choose a different flash mode.
24
The camera is in continuous mode.
The flash is off (X).
The camera is in AUTO, B, C, G, H, I,
D, M, L, J, K, P, O, N, Q, or A Choose a different shooting mode.
mode.
28
The subject is not in range of the flash.
Position the subject in range of the flash.
94
The flash window is obstructed.
Hold the camera correctly.
14
Files have been repeatedly recorded to and After copying important files to another
deleted from a type M xD-Picture Card.
device, format the card or delete all files.
—
Troubleshooting
Problem
Pictures are
Problem blurred.
images
Pictures are
mottled.
Possible cause
The lens is dirty.
The lens is blocked.
Solution
Clean the lens.
Keep objects away from the lens.
f is displayed during shooting.
Check focus before shooting.
g is displayed during shooting.
Use the flash or a tripod.
The ambient temperature is high and the This is normal and does not indicate a malsubject is poorly lit.
function. Choose a lower sensitivity.
Page
79
14
15, 21,
86
24
56
Playback
Problem
Pictures are
grainy.
Solution
Page
—
—
—
—
Adjust playback volume.
39, 74
Hold the camera correctly during recording. 37
Hold the camera correctly during playback.
39
Remove protection using the device with
65
which it was originally applied.
Turn the camera off before opening the battery-chamber cover to replace the battery or 11, 73
insert a memory card.
Troubleshooting
Possible cause
The pictures were taken with a different make
or model of camera.
Pictures
The pictures were taken at an image size of
Playback zoom
l or with a different make or model of
unavailable.
camera.
Playback volume is too low.
No sound in
Audio
The microphone was obstructed.
movie playback.
The speaker is obstructed.
Selected pictures Some of the pictures selected for deletion
Deletion
are not deleted. are protected.
File numbering
The battery-chamber cover was opened
Frame no. is unexpectedly
while the camera was on.
reset.
83
Troubleshooting
Connections
Problem
TV
No picture or
sound.
No color.
The computer
Computer does not recognize the camera.
Pictures can not
be printed.
Only one copy is
PictBridge
printed.
The date is not
printed.
84
Possible cause
The camera is not properly connected.
The supplied A/V cable was connected during movie playback.
Input on the television is set to “TV”.
The camera is not set to the correct video
standard.
The volume on the television is too low.
The camera is not set to the correct video
standard.
Solution
Connect the camera correctly.
Connect the camera once movie playback
has ended.
Set input to “VIDEO”.
Match the camera o VIDEO SYSTEM setting to the TV.
Adjust the volume.
Match the camera o VIDEO SYSTEM setting to the TV.
The camera is not properly connected.
Connect the camera correctly.
52
The camera is not properly connected.
The printer is off.
Connect the camera correctly.
Turn the printer on.
41
—
The printer is not PictBridge-compatible.
—
Page
40
39, 40
—
40, 71
—
40, 71
—
Troubleshooting
Miscellaneous
Problem
Possible cause
Temporary camera malfunction.
Nothing happens when the
shutter button is pressed.
The battery is exhausted.
The camera does not function as expected.
Temporary camera malfunction.
Solution
Page
Remove and reinsert the battery.
6
Charge the battery or insert a fully-charged
4, 6
spare battery.
Remove and reinsert the battery. If the
problem persists, contact your FUJIFILM 6, 100
dealer.
Troubleshooting
85
Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
O (red)
N (blinks red)
g
Description
Low battery.
Battery exhausted.
Slow shutter speed. Picture may be blurred.
f
(displayed in red)
The camera can not focus.
e
(blinks red)
FOCUS ERROR
ZOOM ERROR
NO CARD
CARD NOT INITIALIZED
PROTECTED CARD
BUSY
86
Solution
Charge the battery or insert a fully-charged spare battery.
Use the flash or mount the camera on a tripod.
• Use focus lock to focus on another subject at the
same distance, then recompose the picture (pg. 21).
• If the subject is poorly lit, try focusing at a distance of
about 2 m (6 ft. 7 in.).
• Use macro mode to focus when taking close-ups.
The subject is too bright or too dark. The picIf the subject is dark, use the flash.
ture will be over- or under-exposed.
Turn the camera off and then on again, taking care not
Camera malfunction.
to touch the lens. If the message persists, contact a
FUJIFILM dealer (pg. 100).
No memory card inserted when COPY is seInsert a memory card.
lected in the playback menu.
The memory card or internal memory is not
Format the memory card or internal memory (pg. 75).
formatted.
Clean the contacts with a soft, dry cloth. If the mesThe memory card contacts require cleaning. sage is repeated, format the memory card (pg. 75). If
the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer (pg. 100).
The memory card is locked.
Unlock the memory card (pg. 8).
The memory card is incorrectly formatted.
Use the camera to format the memory card (pg. 75).
Warning Messages and Displays
Warning
CARD ERROR
Description
Solution
The memory card is not formatted for use in
Format the memory card (pg. 75).
the camera.
Clean the contacts with a soft, dry cloth. If the mesThe memory card contacts require cleaning or
sage is repeated, format the memory card (pg. 75). If
the memory card is damaged.
the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer (pg. 100).
Troubleshooting
p MEMORY FULL
q MEMORY FULL
The memory card or internal memory is full; Delete pictures or insert a memory card with more free
space.
INTERNAL MEMORY IS FULL pictures can not be recorded or copied.
INSERT A NEW CARD
Re-insert the memory card or turn the camera off
Memory card error or connection error.
and then on again. If the message persists, contact a
FUJIFILM dealer (pg. 100).
WRITE ERROR
Not enough memory remaining to record ad- Delete pictures or insert a memory card with more free
ditional pictures.
space.
The memory card or internal memory is not
Format the memory card or internal memory (pg. 75).
formatted.
The file is corrupt or was not created with the
The file can not be played back.
camera.
Clean the contacts with a soft, dry cloth. If the mesREAD ERROR
The memory card contacts require cleaning. sage is repeated, format the memory card (pg. 75). If
the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer (pg. 100).
87
Warning Messages and Displays
Warning
FRAME NO. FULL
TOO MANY FRAMES
CANNOT DETECT
CANNOT EXECUTE
A CANNOT EXECUTE
Description
Solution
Format the memory card and select RENEW for the
b FRAME NO. option in the H SETUP menu. Take
The camera has run out of frame numbers
a picture to reset frame numbering to 100-0001,
(current frame number is 999-9999).
then return to the b FRAME NO. menu and select
CONTINUOUS.
Date for which more than 4,999 pictures exist
Choose a different date.
selected in sort-by-date view.
Red-eye reduction can not be applied to the
selected picture or movie.
An attempt was made to delete or rotate a
protected picture.
p NO IMAGE
The source device selected in the playback
COPY menu contains no pictures.
q NO IMAGE
l CAN NOT TRIM
An attempt was made to crop a l picture.
The picture selected for cropping is damaged
CAN NOT TRIM
or was not created with the camera.
The DPOF print order on the current memory
DPOF FILE ERROR
card contains more than 999 images.
CAN NOT SET DPOF
The picture can not be printed using DPOF.
A CAN NOT SET DPOF Movies can not be printed using DPOF.
CAN NOT ROTATE
The picture can not be rotated.
A CAN NOT ROTATE
Movies can not be rotated.
A connection error occurred while pictures
COMMUNICATION ERROR were being printed or copied to a computer
or other device.
PROTECTED FRAME
88
—
Remove protection before deleting or rotating pictures.
Select a different source.
These pictures can not be cropped.
Copy the pictures to internal memory and create a new
print order.
—
—
—
—
Confirm that the device is turned on and that the USB
cable is connected.
Warning Messages and Displays
Warning
PRINTER ERROR
PRINTER ERROR
RESUME?
CAN NOT BE PRINTED
Description
Solution
Check printer (see printer manual for details). To resume
Printer out of paper or ink, or other printer er- printing, turn the printer off and then turn it back on.
ror.
Check printer (see printer manual for details). If printing
does not resume automatically, press MENU/OK to resume.
Movies and some pictures created with other devices
An attempt was made to print a movie, a pic- can not be printed. If the picture was created with the
ture not created with the camera, or a picture camera, check the printer manual to confirm that the
in a format not supported by the printer.
printer supports the JFIF-JPEG or Exif-JPEG format. If it
does not, the pictures can not be printed.
Troubleshooting
89
Glossary
Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details visible using optical zoom are simply enlarged, producing a slightly “grainy” image.
DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders” stored
in internal memory or on a memory card. The information in the order includes the pictures to be
printed and the number of copies of each picture.
EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount
of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV
increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering the
camera can be controlled by adjusting aperture and shutter speed.
Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction during printing.
JPEG (Joint Photographic Experts Group): A compressed file format for color images. The higher the compression
rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.
Motion JPEG: An AVI (Audio Video Interleave) format that stores images and sound in a single file, with the images
recorded in JPEG format. Motion JPEG files can be played in QuickTime 3.0 or later.
WAV (Waveform Audio Format): A standard Windows audio file format. WAV files have the extension “*.WAV” and
may be compressed or uncompressed. The camera uses uncompressed WAV. WAV files can be played using
Windows Media Player or QuickTime 3.0 or later.
Appendix
90
White balance: The human brain automatically adapts to changes in the color of light, with the result that objects
that appear white under one light source still appear white when the color of the light source changes. Digital
cameras can mimic this adjustment by processing images according to the color of the light source. This process
is known as “white balance.”
Flash Mode and Shooting Mode
The flash modes available depend on the shooting mode (pg. 28) and the option selected for P FACE
DETECTION.
■ PFACE DETECTION: R ON V OFF or OFF
Flash mode AUTO B
AUTO
✔ —
T
✔ —
X
✔ ✔
U
— —
C
✔
✔
✔
—
F
✔
✔
✔
✔
H
✔
✔
✔
—
I
—
—
✔
✔
Shooting mode
D M L
— ✔ ✔
— ✔ ✔
✔ ✔ ✔
— — —
K
—
✔
✔
—
P
—
—
✔
—
O
✔
—
—
—
N
—
—
✔
—
G* H*
— —
— —
— —
— —
I
—
—
✔
✔
Shooting mode
D M L J* K
— ✔ ✔ — —
— ✔ ✔ — ✔
✔ ✔ ✔ — ✔
— — — — —
P*
—
—
—
—
O
✔
—
—
—
N Q* B
— — ✔
— — ✔
✔ — ✔
— — ✔
G
—
—
✔
—
J
—
—
✔
—
Q B
— ✔
✔ ✔
✔ ✔
— ✔
■ PFACE DETECTION: R ON V ON
Flash mode AUTO B
q
✔ —
r
✔ —
X
✔ ✔
W
— —
C
✔
✔
✔
—
F
✔
✔
✔
✔
* Red-eye removal (R ON V ON) not available.
Appendix
91
Internal Memory/Memory Card Capacity
The following table shows the recording time or number of pictures available at different image qualities. All figures are approximate; file size varies with the scene recorded, producing wide variations in
the number of files that can be stored. The number of exposures or length remaining may not diminish
at an even rate.
Image size (pixels)
File size
Internal memory
(approx. 8 MB)
16 MB
32 MB
64 MB
128 MB
256 MB
512 MB
1 GB
2 GB
512 MB
1 GB
2 GB
4 GB
8 GB
gF
gN
3264 × 2448
4.2 MB
2.3 MB
1
2
h
i
k
3264 × 2176 2304 × 1728 1600 × 1200
2.1 MB
1.0 MB
720 KB
3
6
l
640 × 480
215 KB
m
640 × 480
—
n
320 × 240
—
9 sec.
35
4 sec.
3
6
6
13
20
7
13
14
28
41
15
27
29
57
84
30
54
60
115
169
61
110
121
231
339
124
221
242
463
680
249
444
486
929
1363
498
889
974
1860
2728
120
214
235
449
659
241
430
471
900
1320
483
861
943
1802
2643
968
1725
1890
3609
5293
1924
3463
3793
7242
10622
* Total length of all movie files. Individual movies can not exceed 2 GB in size.
70
144
293
591
1186
2374
4757
9519
2299
4607
9221
18467
37056
10 sec.
24 sec.
50 sec.
1.7 min.
3.5 min.
7.0 min.
14.1 min.
28.3 min.
6.8 min.
13.7 min.
27.5 min.
55.1 min.*
110.6 min.*
xD-Picture Card
10
SD card
SDHC
card
22 sec.
51 sec.
1.7 min.
3.6 min.
7.4 min.
14.9 min.
30.1 min.
60.3 min.
14.5 min.
29.1 min.
58.4 min.
117.0 min.*
234.9 min.*
Note: The space available for movies may drop as pictures are recorded to and deleted from type M xD-Picture Cards. Space
can be increased by deleting all frames or formatting the card. Copy any important files to a computer or other device before
proceeding.
92
Specifications
System
Model
Effective pixels
CCD
Storage media
File format
Number of recorded pixels
File size
Lens
Focal length
Digital zoom
Aperture
Sensitivity
Photometry
Exposure control
Appendix
Focal range
(from lens surface)
Digital camera FinePix J15fd
8.15 million pixels
1/
2.5-inch
Internal memory (approx. 8 MB)/xD-Picture Card (16/32/64/128/256/512 MB/1 GB/2 GB)/
SD/SDHC Memory Card (FUJIFILM recommendation (p. 8))
Still image: DCF-compliant
Compressed: Exif ver.2.2 JPEG, DPOF-compatible
*Design rule for Camera File System compliant/DPOF compatible
Movie: AVI format, Motion JPEG
Audio: Monaural sound
Still image:
3264 × 2448 pixels/3264 × 2176 pixels/
2304 × 1728 pixels/1600 × 1200 pixels/
640 × 480 pixels (g/h/i/k/l)
See the table on the p. 92
3 × optical zoom lens
F2.8 (Wide-angle) – F5.2 (Telephoto)
f=6.2 mm – 18.6 mm (Equivalent to approx. 38 mm – 113 mm on a 35 mm camera)
Approx. 5.1 × (3 × optical zoom lens is used together: Max. zoom scale: approx. 15.3 ×)
F2.8 – F5.6 (Wide-angle)
F5.2 – F10.4 (Telephoto)
Normal: approx. 40 cm (1.3 ft.) to infinity
Macro: wide-angle: approx. 15 cm (5.9 in.) to infinity
telephoto: approx. 40 cm (1.3 ft.) to infinity
AUTO / Equivalent to ISO 64/100/200/400/800/1600 (Standard output sensitivity)
TTL 256-zones metering
Program AE
93
Specifications
System
Scene position
Exposure compensation
Intelligent Face Detection
Shutter speed
Continuous shooting
Focus
White balance
Self-timer
Flash type
Flash mode
LCD monitor
94
B (BABY MODE) /C (ANTI-BLUR) /F (PORTRAIT) /G (LANDSCAPE) /H (SPORT) /I (NIGHT) /
D (NATURAL LIGHT) /M (BEACH) /L (SNOW) /J (FIREWORKS) /K (SUNSET) /P (FLOWER) /
O (PARTY) /N (MUSEUM) /Q (TEXT)
–2 EV to +2 EV in 1/3 EV-step increments (B)
Available
1/4 sec. to 1/2000 sec.* (AUTO)
8 sec. to 1/2000 sec.* (throughout all shooting mode)
*depend on Exposure mode
Number of recorded frames: up to 3 frames (approx. 1 frame/sec.)
Mode: Single-AF
AF system: TTL contrast-type
AF frame selection: CENTER
Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight), Fluorescent (Warm White),
Fluorescent (Cool White), Incandescent light)
Approx. 2 sec./10 sec.
Auto flash
Effective range: (B: AUTO)
Wide-angle: approx. 50 cm – 4.0 m (1.6 ft. – 13.1 ft.)
Telephoto: approx. 50 cm – 2.2 m (1.6 ft. – 7.2 ft.)
Macro: approx. 30 cm – 80 cm (11.8 in. – 2.6 ft.)
Auto, fill flash, off, slow sync (red-eye removal off ); auto with red-eye reduction, fill flash with red-eye
reduction, off, slow sync with red-eye reduction (red-eye removal on)
2.5 inches, Aspect ratio: 4:3; approx. 153,000 dots Amorphous silicon TFT color LCD monitor, Approx.
96% coverage
Specifications
System
Movie
Photography functions
Playback functions
Other functions
Input/output terminals
A/V OUT (Audio/video output)
Digital input/output
640 × 480 pixels (m) / 320 × 240 pixels (n)
(30 frames per second with monaural sound)
A movie recording will stop automatically when a movie file becomes approx. 2GB. If you want to
continue recording, press the shutter button again. The available recording time is displayed based
on approx. 2GB. Zoom cannot be used during movie recording.
Intelligent Face Detection with red-eye removal, best framing, and frame number memory
Intelligent Face Detection with red-eye removal, multi-frame playback, sort-by-date, cropping (still
pictures only), slide show, and image rotation
PictBridge, Exif Print, language selection (Simplified Chinese, Traditional Chinese, Czech, Dutch,
English, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish,
Swedish, Thai, and Turkish), time difference
NTSC/PAL-type (with monaural sound)
USB, PTP (Picture Transfer Protocol)/MTP (Media Transfer Protocol)
Appendix
95
Specifications
Power supply/other
Power supply
Rechargeable Battery NP-45
Guide to the number of
Battery Type
Number of frames
available frames for battery
NP-45
Approx. 150 frames
operation
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using a battery, use the battery supplied with the camera. The storage media should be xDPicture Card.
Pictures should be taken at a temperature of +23 °C (+73 °F), with the LCD monitor turned on, the optical zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original
position every 30 seconds, the flash used at full power every second shot and the camera turned off
and then on again once every 10 shots.
• Note: Because the number of available shots varies depending on the level of charge in the battery,
the figures shown here for the number of available shots using the battery is not guaranteed.
The number of available shots will also decline at low temperatures.
Camera dimensions
91.0 mm × 55.0 mm × 22.0 mm/3.6 in. × 2.2 in. × 0.9 in. (not including accessories and attachments)
(W × H × D)
Camera mass (weight)
Approx. 110 g/3.9 oz. (not including accessories, battery and Memory Card)
Weight for photography
Approx. 126.5 g/4.5 oz. (including battery and Memory Card)
Operating conditions
Temperature: 0 °C to +40 °C (+32 °F to +104 °F)
80% humidity or less (no condensation)
NP-45 rechargeable battery
Nominal voltage
Nominal capacity
Operating temperature
Dimensions (W × H × D)
Weight
96
DC 3.7 V
740 mAh
0 °C – +40 °C/+32 °F – +104 °F
31 mm × 39.4 mm × 5.7 mm/1.2 in. × 1.6 in. × 0.2 in.
Approx. 15 g/0.5 oz.
Specifications
BC-45A battery charger
Rated input
Input capacity
Rated output
Supported batteries
Charging time
Dimensions (W × H × D)
(built-in plug model)
Dimensions (W × H × D)
(power cable model)
Weight (built-in plug model)
Weight (power cable model)
Operating temperature
100–240 V AC, 50/60 Hz
7.0 VA (100 V)/10.8 VA (240 V)
4.2 V DC, 550 mA
NP-45 rechargeable batteries
Approx. 100 minutes
101.7 mm × 56 mm × 20 mm/4.0 in. × 2.2 in. × 0.8 in.
85 mm × 54 mm × 20 mm/3.3 in. × 2.1 in. × 0.8 in.
Approx. 66 g/2.3 oz., excluding battery
Approx. 56 g/2.0 oz., excluding battery
0 °C – +40 °C/+32 °F – +104 °F
Appendix
97
Specifications
Notes on the Battery and Battery Charger
• The battery and charger may become warm to the touch during charging. This is normal and does not indicate
a malfunction. If possible, charge the battery in a well-ventilated location.
• The battery charger may vibrate when in use. This is normal and does not indicate a malfunction.
• The charger is for use with NP-45 batteries only.
• If the charger causes radio interference, increase the distance between the charger and the radio receiver.
• Do not leave the charger in locations that are very dusty or exposed to strong vibration, extreme humidity, or
high temperatures (for example, in direct sunlight or next to a heater).
• The battery charger can be used with input voltages of 100–240 V AC and 50 or 60 Hz. The shape of the plug varies with the country of sale; consult your travel agent to determine whether the charger can be used abroad.
Color Television Systems
NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in
the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in
European countries and China.
98
Specifications
Notices
• Specifications subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this manual.
• Although the monitor is manufactured using advanced high-precision technology, small bright points and
anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and
does not indicate a malfunction; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric fields, static electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
Appendix
99
FUJIFILM Digital Camera Worldwide Network
Contact your local distributor (see list below) for repairs and technical support. Please present the warranty and purchase receipt when requesting repairs; refer to the warranty card for the conditions of the
warranty. Technical support may not be available for models not handled by the local distributor. The
following information is subject to change without notice.
NORTH AMERICA
Canada
FUJIFILM Canada Inc.
U.S.A.
FUJIFILM U.S.A., Inc.
Technical support
Repair service
Technical support
Repair service
TEL 1-866-818-FUJI (3854) http://www.fujihelp.ca
TEL 1-800-263-5018 http://www.fujihelp.ca
TEL 800-800-3854 digitalinfo@fujifilm.com
TEL 800-659-3854
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support
Repair service
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
TEL +54-11-4836-1000 servtec@imageneinformacion.com.ar
TEL +591 33 44 1129 gciagral@bibosi.scz.entelnet.bo
TEL 0800-12-8600 camarasdigitais@fujifilm.com.br
TEL 56-2-6781200 serviciotecnico@reifschneider.cl
TEL +57 1 338-0299 animex@etb.net.co
TEL 593-72-835526
TEL +593 783 5526 portiz@fujifilm.com.ec
TEL (52-55) 5263-55000 eizquierdo@fujifilm.com.mx
TEL (52-55) 5366-5150/56/57 cpalma@fujifilm.com.mx
TEL +595 21 444256 jmarbulo@fujifilm.com.py
TEL +51 14 33 5563 jalvarado@fujifilm.com.pe
TEL +598-2-9002004 fotocam@adinet.com.uy
TEL (05982) 419 4542 kiel@fujifilm.com.uy
TEL 0212-2022300 hellmund@hellmund.com
Technical support & repairs
Technical support & repairs
Technical support
Repair service
TEL 0043 1 6162606/51 or 52 kamera.service@fujifilm.at
TEL 3210242090 info@fuji.be
TEL 38512319060 dsaravanja@fujifilm.hr
TEL 38512316228 info@fujifilm.hr
CENTRAL AND SOUTH AMERICA
Argentina
Bolivia
Brazil
Chile
Colombia
Ecuador
Mexico
Imagen e informacion S.A.
Reifschneider Bolivia Ltda.
FUJIFILM do Brasil Ltda.
Reifschneider SA
Animex de Colombia Ltda.
Espacri Cia Ltda
Importaciones Espacri Cia. Ltda.
Fujifilm de Mexico, S.A. de C.V.
Paraguay
Peru
Uruguay
Uruguay
Venezuela
Errece S.R.L.
Procesos de Color S.A.
Fotocamara S.R.L.
Kiel S.A.
C. Hellmund & Cia Sa
EUROPE
Austria
Belgium
Croatia
100
Fuji Film Oesterreich
Belgian Fuji Agency
I&I d.o.o.
EUROPE
Cyprus
Czech Republic
Denmark
Finland
France
Germany
PMS IMAGING LTD
Doros Neophytou
CAMERA REPAIRS
Fujifilm Cz., s.r.o.
AWH servis
Fujifilm Danmark A/S
Fuji Finland Oy
FUJIFILM France
FUJIFILM Electronic Imaging Europe
GmbH
FUJIFILM HELLAS S.A.
Fujifilm Hungary Ltd.
Iceland
Italy
Icephoto (Ljosmyndavorur)
FujiFilm Italia S.r.l.
Lithuania
Malta
Norway
Fujifilm Lithuania
Ciancio (1913) Co.Ltd.
Fujifilm Norge AS
Poland
Portugal
Fujifilm Polska Distribution Sp.
z o.o.
Fujifilm Portugal, Lda
Romania
Russia
CTS-Cardinal Top Systems Ltd
ZAO “Fujifilm RU”
Slovakia
Fujifilm Slovakia s.r.o.
Spain
Fujifilm Espana S.A.
Technical support
Repair service
Technical support & repairs
Technical support & repairs
Technical support & repairs
Technical support & repairs
TEL 00420 234 703 411 fricman@fujifilm.cz
TEL 00420 222 721 525 awh@awh.cz
TEL 0045 45662244 fujifilm@fujifilm.dk
TEL +358 9 825951 www.fuji.fi fuji@fuji.fi
direction.technique@pm2s.fr
Tel 0180 / 589 89 80* service@fujifilm-digital.com
*
0,14 EUR pro Minute aus dem deutschen Festnetz, abweichende
Preise aus Mobilfunknetzen möglich,Stand bei Drucklegung.
Technical support & repairs
Technical support
Repair service
Technical support & repairs
Call center
Repair service
Technical support & repairs
Technical support & repairs
Technical support
TEL 0030 210 9404100 fujifilm@fujifilm.gr
TEL 3612389410 fujifilm@fujifilm.hu
TEL 3613633777
TEL 354 568 0450 framkollun@fujifilm.is
TEL 039-0267978181 info@fujifilm.it
TEL 039-6058294 FAX 039-6058295
TEL 370-5-2130121 info@fujifilm.lt
TEL 0356-21-480500 info@fujifilm.com.mt
TEL 0047-02273
http://www.fujifilm.no/ mailto:post@fujifilm.no
Repair service
TEL 0047-55393880
http://www.camera.no/mailto:service@camera.no
Technical support
TEL +48-22-517-66-00 fujifilm@fujifilm.pl
Repair service
TEL +48-22-886-94-40 serwis@fujifilm.pl
Technical support
TEL (351) 226 194 237 finepix@fujifilm.pt
Repair service
TEL (351) 226 194 200 cameras@fujifilm.pt
Technical support & repairs TEL 4021-230-09-82 cts_tirla@hotmail.com
Technical support
TEL +7-495-956-98-58 info@fujifilm.ru
Repair service
TEL +7-495-956-98-58 www.fujifilm.ru
Technical support
TEL 00421 2 33 595 107 fujifilm@fujifilm.sk
Repair service
TEL 00421 2 33 595 119 servis@fujifilm.sk
Technical support & repairs TEL 902012535
http://www.fujifilm.es/soporte/ tallersat@fujifilm.es
Appendix
Greece
Hungary
Technical support & repairs TEL 35722746746 mariosashiotis@fujifilm.com.cy
Technical support & repairs TEL 35722314719 dorosn@logosnet.cy.net
101
EUROPE
Sweden
Fujifilm Sverige AB
Switzerland /
Lichtenstein
The Netherlands
Fujifilm (Switzerland) AG
Turkey
FUJIFILM Electronic Imaging
Nederland
Fujifilm Turkiye Sinfo A.S.
U.K.
FUJIFILM UK Ltd.
Ukraine
Image Ukraine CJSC
Technical support
TEL 46 8 506 141 70 kamera@fujifilm.se
Repair service
TEL 46 8 506 513 54 kameraverkstaden@fujifilm.se
Technical support & repairs TEL +41 44 855 5154 RepairCenter@fujifilm.ch
Technical support
Repair service
Technical support
Repair service
Technical support
Repair service
Technical support & repairs
TEL +31(0)102812500 helpdesk@fujifilm-digital.nl
TEL +31(0)102812520 camerareparaties@fujifilm-digital.nl
TEL +90 212 696 5090 csarp@fujifilm.com.tr
TEL +90 212 696 5090 servis@fujifilm.com.tr
TEL +44 (0)8700 841310 fujitec@fuji.co.uk
TEL +44 (0)8700 841314 fujitec@fuji.co.uk
TEL +380-44-4909075 d@fujifilm.ua
Technical support & repairs
Technical support
Repair service
Technical support & repairs
TEL (+98-21)2254810-19 fuka@neda.net
TEL (+ ) 972 3 9250666 digital@fujifilm.co.il
TEL (+ ) 972 3 9250666 khaim@shimone.com
TEL 009626-4646387 gstores@go.com.jo
Technical support & repairs
Technical support
Technical support
Technical support
Repair service
Technical support & repairs
Technical support
Repair service
TEL +961 1 252474 fototek@antakiholding.com
TEL 00974 44 66 175 prabu@techno-blue.com
TEL 96626978756 service@fujifilm.com.sa
TEL + 963 11 2218049 f.t.c@Net.SY
TEL + 963 21 4641903 filmtradin@Net.SY
TEL + 971-4-2823700 photography@grandstores.ae
TEL 00967-1-503980
TEL 00967-1-503977
MIDDLE EAST
Iran
Israel
Tehran Fuka Co.
Shimone Group Ltd.
Jordan
Lebanon
Qatar
Saudi Arabia
Syria
Grand Stores Al- Abdali,
Amman / Jordan
Fototek S.A.R.L.
Techno Blue
Emam Distribution Co. Ltd.
Film Trading Company
U.A.E.
Yemen
Grand Stores
Al-Haidary Trading
AFRICA
Egypt
Kenya
South Africa
Foto Express Egypt
Fuji Kenya Ltd
Cameratek CC.
Technical support & repairs TEL (202) 7762062 fotoegypt@access.com.eg
Repair service
TEL (254-20)4446265-8 info@fujifilm.co.ke
Technical support & repairs TEL +27 11 251 2400 www.cameratek.co.za
FUJIFILM Australia Pty Ltd
Brijlal & Co. Ltd
Phocidis SARL
Technical support & repairs TEL 1800 226 355 digital@fujifilm.com.au
Technical support & repairs TEL (679)3304133 kapadia@connect.com.fj
Technical support & repairs TEL (00 687) 25-46-35 phocidis@phocidis.nc
OCEANIA
Australia
Fiji
New Caledonia
102
OCEANIA
New Zealand
Papua New
Guinea
Fujifilm NZ Ltd
Oceania PNG Limited
Technical support & repairs TEL +64-9-4140400 glenn.beaumont@fujifilm.co.nz
Technical support
TEL +675 3256411 oceania@daltron.com.pg
Fuji Photo Products Co., Ltd.
PT. Modern Internasional, Tbk.
FUJIFILM (Malaysia) Sdn. Bhd.
Technical support & repairs
Technical support & repairs
Technical support
Repair service
Technical support
ASIA
Hong Kong
Indonesia
Malaysia
Philippines
Singapore
South Korea
Taiwan
Thailand
Vietnam
TEL (852)2406 3287 rsd@chinahkphoto.com.hk
TEL +62 021 45867187 assd_kmrsrv@modernphoto.co.id
TEL 603-55698388 technical@fujifilm.com.my
TEL 603-55698388 camera@fujifilm.com.my
YKL Development & Trdg. Corp.
TEL 632-7436601~06
info@yklcolor.com digital@yklcolor.com
Repair service
TEL 632-7436601~06 techop_services@yklcolor.com
FUJIFILM (Singapore) Pte Ltd
Technical support & repairs TEL 65-6380 5557 service@fujifilm.com.sg
Korea Fujifilm Co., Ltd.
Technical support
TEL +82-2-3282-7363 photo@fujifilm.co.kr
Yonsan AS Center (Fujidigital)
Repair service
TEL +82-2-701-1472 1bowl@hanmail.net
Kangnam AS Center (Digitalgallery) Repair service
TEL +82-2-2203-1472 nurijili@hanmail.net
Busan AS Center (Digital-Sewon)
Repair service
TEL +82-51-806-1472 merahan@yahoo.co.kr
Hung Chong Corp.
Technical support & repairs TEL 886-2-6602-8988 dah@mail.hungchong.com.tw
FUJIFILM (Thailand) Ltd.
Technical support
TEL +662-2706000 ext. 751,752
Dusit_Suriyong@fujifilm.co.th yaowarat@fujifilm.co.th
Repair service
TEL +662-2706000 ext.761,762 warin@fujifilm.co.th
International Minh Viet Co., Ltd.
Technical support & repairs TEL +84-8-4135740 ext. 322 diep.phanthithanh@imv.com.vn
Appendix
103
IMPORTANT NOTICE: Read Before Using the Software
BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM CORPORATION, PLEASE READ THIS END USER
LICENSE AGREEMENT CAREFULLY. YOU SHOULD USE THE SOFTWARE ON THE CD-ROM ONLY IF YOU CON SENT TO THIS AGREEMENT. BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE BOUND BY THIS
AGREEMENT.
End User License Agreement
This End User License Agreement (“Agreement”) is an agreement between FUJIFILM
Corporation (“FUJIFILM”) and you, which sets forth the terms and conditions of the license granted for you to use the software provided by FUJIFILM.
The CD-ROM contains third-party software. In case a separate agreement is provided
by a third party supplier for its software, the provisions of such separate agreement shall
apply to the use of such third party software, prevailing over those of this Agreement.
1. Definitions.
(a) “Media” means the CD-ROM titled “Software for FinePix” which is provided to you
together with this Agreement.
(b) “Software” means the software which is recorded on Media.
(c) “Documentation” means the operation manuals of Software and other related
written materials which are provided to you together with Media.
(d) “Product” means Media (including Software) and Documentation collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a) to install one copy of Software onto one computer in binary machine executable
form;
(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any part of Software,
Media or Documentation to any third party without FUJIFILM’s prior written consent. You also shall not sublicense, assign or otherwise transfer all or any part of
the rights granted to you by FUJIFILM under this Agreement without FUJIFILM’s
prior written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not copy or reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation. You also
shall not alter or remove copyright and other proprietary notices that appear on
or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer, decompile, or
disassemble Software.
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
4. Ownership.
All copyrights and other proprietary rights to Software and Documentation are
owned and retained by FUJIFILM or the third party suppliers as indicated on or in
Software or Documentation. Nothing contained herein shall be construed, expressly
or implicitly, as transferring or granting any right, license, or title to you other than
those explicitly granted under this Agreement.
5. Limited Warranty.
FUJIFILM warrants to you that Media is free from any defect in material and workmanship under normal use for ninety (90) days from the date of your receipt of Media.
Should Media not meet the foregoing warranty, FUJIFILM shall replace such defective
Media with other Media bearing no defect. FUJIFILM’s entire liability and your sole
and exclusive remedy with regard to any defect in Media shall be expressly limited to
such FUJIFILM’s replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES PRODUCT “AS IS”
AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED. FUJIFILM SHALL
MAKE NO WARRANTY, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS, INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY COPYRIGHT,
PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY,
MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES (INCLUDING
DAMAGES FOR LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE USE OF OR
INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
8. No export.
You acknowledge that neither Software nor any part thereof, will be transferred, or
exported to any country or used in any manner in violation of any export control laws
and regulations to which Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof, FUJIFILM may immediately
terminate this Agreement without any notice.
10. Term.
This Agreement is effective until the date when you cease to use Software, unless
earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your own responsibility and expense, delete or destroy immediately all Software (including its copies),
Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance with laws of Japan.
Printed in China
Download PDF

advertising