Owner`s manual | FujiFilm J20 Digital Camera User Manual

BL00835-200
EN
Before You Begin
First Steps
Basic Photography and Playback
Owner’s Manual
Thank you for your purchase of this
product. This manual describes
how to use your FUJIFILM FinePix
J20 or J25 digital camera and the
supplied software. Be sure that
you have read and understood its
contents before using the camera.
More on Photography
More on Playback
Movies
Connections
Menus
Technical Notes
For information on related products, visit our website at
http://www.fujifilm.com/products/index.html
Troubleshooting
Appendix
Camera Q & A
Find items by task.
Camera Setup
Question
How do I set the camera clock?
Can I set the clock to local time when I travel?
How do I keep the monitor from turning off automatically?
How do I stop the camera beeping and clicking?
What are the parts of the camera called?
What do the icons in the monitor mean?
How do I use the menus?
What’s behind that flashing icon or error message in the monitor?
How much charge is left in the battery?
Key phrase
See page
Date and time
12
Time difference
77
Auto power off
76
Silent mode
25
Operation and shutter volume
72
Parts of the camera
2
Monitor
3
Menus
55
Messages and displays
86
Battery level
13
Taking Pictures
Question
How many pictures can I take?
Is there a quick and easy way to take snapshots?
How can I make good portraits?
Can the camera automatically select the most suitable mode?
Is there a simple way to adjust settings for different scenes?
How do I shoot close-ups?
How do I keep the flash from firing?
How do I stop my subjects’ eyes glowing red when I use the flash?
How do I “fill-in” shadows on back-lit subjects?
How do I take a group portrait that includes the photographer?
ii
Key phrase
Memory capacity
k mode
Intelligent Face Detection
G mode
Shooting mode
Macro mode (Close-ups)
See page
91
13
18
29
28
23
Flash mode
24
Self-timer mode
26
Camera Q & A
Question
How do I frame pictures with the subject off to one side?
How do I shoot movies?
Key phrase
Focus lock
Recording movies
See page
21
38
Key phrase
Single-frame playback
Deleting pictures
Erase
Playback zoom
Multi-frame playback
Sort by date
Protect
Choosing a display format
Viewing pictures on TV
See page
32
17
36
33
34
35
66
32
41
Viewing Pictures
Question
How do I view my pictures?
Is there a simple way to delete one image?
How do I delete one or all images at once?
Can I zoom in on pictures during playback?
How do I view a lot of pictures at once?
How do I view all pictures taken on the same day?
Can I protect my pictures from accidental deletion?
Can I hide the icons in the monitor when viewing my pictures?
How do I view my pictures on TV?
Sharing Pictures
Question
Can I print pictures on my home printer?
Can I copy my pictures to my computer?
Key phrase
See page
Printing pictures
42
Viewing pictures on a computer
48
iii
Table of Contents
Camera Q & A ..................................................................................... ii
Camera Setup ............................................................................... ii
Taking Pictures ............................................................................. ii
Viewing Pictures ......................................................................... iii
Sharing Pictures .......................................................................... iii
About This Manual ......................................................................... vi
J Using the Self-Timer...............................................................26
a Shooting Mode .........................................................................28
Selecting a Shooting Mode......................................................28
Shooting Modes ...........................................................................29
G SCENE RECOGNITION ........................................................29
Before You Begin
Single-Frame Playback ...............................................................32
Playback Zoom..............................................................................33
Multi-Frame Playback .................................................................34
Sort by Date .....................................................................................35
A Deleting Pictures .....................................................................36
Introduction....................................................................................... 1
Symbols and Conventions .......................................................... 1
Supplied Accessories .................................................................... 1
Parts of the Camera ....................................................................... 2
The Monitor ................................................................................... 3
First Steps
Charging the Battery ..................................................................... 4
Inserting the Battery...................................................................... 6
Inserting a Memory Card ............................................................. 8
Turning the Camera on and Off............................................... 11
Shooting Mode ............................................................................. 11
Playback Mode .............................................................................. 11
Basic Setup .......................................................................................12
Basic Photography and Playback
Taking Pictures in k (Auto) Mode ........................................13
Viewing Pictures ............................................................................17
More on Photography
Intelligent Face Detection and Red-Eye Removal ..........18
Focus Lock ........................................................................................21
L Macro mode (Close-ups) ......................................................23
K Using the Flash ...........................................................................24
iv
More on Playback
Movies
A Recording Movies ...................................................................38
D Viewing Movies .......................................................................40
Connections
Viewing Pictures on TV ...............................................................41
Printing Pictures via USB ...........................................................42
Connecting the Camera ............................................................42
Printing Selected Pictures ........................................................42
Printing the DPOF Print Order ................................................43
Creating a DPOF Print Order ....................................................45
Viewing Pictures on a Computer............................................48
Installing FinePixViewer ............................................................48
Installing FinePixViewer S: Windows.................................48
Installing FinePixViewer: Macintosh ..................................51
Connecting the Camera ............................................................53
Table of Contents
Menus
Technical Notes
The Shooting Menu ......................................................................55
Using the Shooting Menu.........................................................55
Shooting Menu Options ............................................................56
g ISO .............................................................................................57
k QUALITY..................................................................................58
d EXP. COMPENSATION .........................................................59
e WHITE BALANCE ..................................................................60
c CONTINUOUS (Continuous shooting) .........................61
The Playback Menu.......................................................................62
Using the Playback Menu .........................................................62
Playback Menu Options.............................................................63
b RED EYE REMOVAL ..............................................................64
B SLIDE SHOW ..........................................................................65
E PROTECT .................................................................................66
F COPY.........................................................................................67
D IMAGE ROTATE......................................................................69
H TRIMMING ..............................................................................70
The Setup Menu .............................................................................71
Using the Setup Menu ...............................................................71
Setup Menu Options...................................................................72
a IMAGE DISP. ..........................................................................73
b FRAME NO. ............................................................................74
c DIGITAL ZOOM ....................................................................75
a LCD POWER SAVE ...............................................................75
f PLAYBACK VOLUME...........................................................75
g LCD BRIGHTNESS................................................................75
m FORMAT .................................................................................76
o AUTO POWER OFF ..............................................................76
p TIME DIFFERENCE...............................................................77
Optional Accessories ...................................................................78
Accessories from Fujifilm ..........................................................79
Troubleshooting
Troubleshooting ............................................................................80
Warning Messages and Displays ............................................86
Appendix
Glossary .............................................................................................90
Internal Memory/Memory Card Capacity ..........................91
Specifications ..................................................................................92
Caring for the Camera .................................................................97
v
About This Manual
This manual is for use with the following FinePix cameras: the J20 and J25. The J20 has a 2.7-inch
monitor; the J25 has a 3.0-inch monitor. All operations are identical; save where otherwise noted, the
illustrations in this manual show the J25. Before using the camera, read this Owner’s Manual and the
other supplied documents. For information on specific topics, consult the sources below.
✔ Camera Q & A .................................................... pg. ii
Know what you want to do but don’t know the
name for it? Find the answer in “Camera Q & A.”
✔ Table of Contents ..............................................
..............................................pg.
pg. iv
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.
✔ Troubleshooting ..............................................pg.
..............................................pg. 80
Having a specific problem with the camera?
Find the answer here.
✔ Warning Messages and Displays .......................
.......................pg.
pg. 86
Find out what’s behind that flashing icon or
error message in the monitor.
✔ Glossary ..........................................................
..........................................................pg.
pg. 90
The meanings of some technical terms may be
found here.
✔ Restrictions on Camera Settings
See another supplied document for restrictions
on the options available in each shooting mode.
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this
manual, SD memory cards are referred to as “memory cards.” For more information, see page 8.
vi
Introduction
Symbols and Conventions
Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simplified for explanatory purposes.
Before You Begin
The following symbols are used in this manual:
C Caution: This information should be read before use to ensure correct operation.
ANote: Points to note when using the camera.
B Tip: Additional information that may be helpful when using the camera.
Supplied Accessories
The following items are included with the camera:
or
NP-45 rechargeable
battery
BC-45A battery charger (with
power cable or built-in plug)
Attaching the Strap
Attach the strap as shown.
Strap
USB cable
FinePix software CD
(IMPORTANT: read
the End User License
Agreement before
opening.)
Owner’s Manual
(may be distributed
on CD in some
countries or regions)
1
Introduction
Parts of the Camera
For more information, refer to the page listed to the right of each item.
1
2
9
8
Selector button
10
11
3
4
7
12
17
16
13
15
14
18
Move cursor up
o (monitor brightness)
button (see below)
I (delete) button (pg. 17)
MENU/OK button
(pg. 12)
Move cursor left
L (macro)
button (pg. 23)
Move cursor right
K (flash) button
(pg. 24)
5
Move cursor down
J (self-timer) button (pg. 26)
6
20
1
2
3
4
5
6
7
8
19
Shutter button ...................................15–16 9 DISP (display)/BACK button .......... 15, 32
ON/OFF button ............................................. 11
( (silent mode) button ....................25
Flash..................................................................24 10 Indicator lamp ............................................16
Microphone .................................................38 11 W (zoom out) button .....................14, 34
Speaker ...........................................................40 12 T (zoom in) button........................... 14, 33
Lens and lens cover
13 D (playback) button ............................32
Self-timer lamp ..........................................26 14 Strap eyelet .................................................... 1
Monitor ............................................................. 3 15 Battery-chamber cover .......................... 6
16 Connector for USB cable .............42, 53
Connector for A/V cable .....................41
17 Tripod mount
18 Battery chamber ......................................... 6
19 Battery latch .................................................. 6
20 Memory card slot ....................................... 8
B Tip: Monitor Brightness
Pressing the o button briefly increases monitor brightness, making the display easier to see in bright light.
Normal brightness is restored when a photograph is taken.
2
Introduction
The Monitor
The following indicators may appear in the monitor during shooting and playback:
4 3 2 1
5
6
7
8
9
12
N
9
ISO 100
13
14
15
16
17
10
11
18
12/31/2050
10 : 00 AM
-1 2 3
19
1
2
3
4
Macro (close-up) mode............. 23 11 Date and time...................................12
Flash mode.........................................24 12 Quality ...........................................38, 58
Silent mode ...................................... 25 13 Number of available frames....91
Intelligent Face Detection
14 Sensitivity ............................................57
indicator ...............................................18 15 Focus warning .................................15
5 Shooting mode ...............................28 16 Blur warning ......................................24
6 Battery level .......................................13 17 Bright monitor indicator.............. 2
7 Self timer indicator ........................26 18 Internal memory indicator * ....... 8
8 White balance ................................. 60 19 Exposure compensation ...........59
9 Continuous mode .........................61
10 Focus frame .......................................15
* Indicates that no memory card is inserted and that pictures will be
stored in the camera’s internal memory (pg. 8).
Before You Begin
■ Shooting
■ Playback
5 4 3 2 1
6
7
100-0001
N
ISO 100
8
1
2
3
4
Protected image ............................ 66
DPOF print indicator ....................45
Red-eye removal indicator ..... 64
Intelligent Face Detection
indicator .......................................18, 64
5
6
7
8
Silent mode indicator................. 25
Playback mode indicator ..........32
Gift image ...........................................32
Frame number .................................74
12/31/2050 10 : 00 AM
-1 2 3
250
F3.3
3
Charging the Battery
The battery is not charged at shipment. Charge the battery before use.
the battery in the charger.
1 Place
Insert the battery into the supplied battery
First Steps
charger as shown, making sure that the
battery is in the correct orientation. The
battery charger comes in one of two types,
depending on the country or region of sale:
one with a built-in plug that plugs directly
into the power outlet (A), and another that
connects to the power outlet via a power
cable (B).
Rechargeable battery
Battery charger
(type A)
Arrow
Terminals
Battery charger
(type B)
4
the charger in.
2 Plug
Plug the charger into a power outlet. The
charging indicator will light.
Type A
Type B
The Charging Indicator
The charging indicator shows battery charge
status as follows:
Charging indicator Battery status
Action
Battery not
Insert the
inserted.
battery.
Off
Battery fully Remove the
charged.
battery.
Battery
Glows
—
charging.
Unplug the
charger and
Blinks
Battery fault.
remove the
battery.
Charging the Battery
3 Charge the battery.
First Steps
C Cautions: Caring for the Battery
• Do not affix stickers or other objects to the battery.
Failure to observe this precaution could make it
impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery
could overheat.
• Use only NP-45 batteries. Failure to observe this
precaution could result in product malfunction.
• Do not remove the labels from the battery or
attempt to split or peel the outer casing.
• The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
• Read the supplied documentation for additional
cautions concerning battery use.
C Caution: Battery Life
A noticeable decrease in the length of time the
battery will hold a charge indicates that it has reached
the end of its service life and should be replaced.
C Cautions: Using the Battery Charger
• Unplug the charger when it is not in use.
• Remove dirt from the battery terminals with a clean,
dry cloth. Failure to observe this precaution could
prevent the battery from charging.
• Charging times increase at low temperatures.
5
Inserting the Battery
After charging the battery, insert it in the camera as described below.
1 Open the battery-chamber cover.
the battery.
2 Insert
Check the label in the battery-chamber.
Face the gold contacts downward and
insert the battery into the battery-chamber,
pressing the battery latch with the battery
in the direction shown below. Confirm that
the battery is securely latched.
A Note
Be sure the camera is off before opening the
battery-chamber cover.
C Cautions
• Do not open the battery-chamber cover
when the camera is on. Failure to observe this
precaution could result in damage to image
files or memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
6
Label
Battery latch
C Caution
Insert the battery in the correct orientation. Do
NOT use force or attempt to insert the battery
upside down or backwards. The camera will not
function if the battery is inserted backwards or
upside down.
Inserting the Battery
3 Close the battery-chamber cover.
Removing the Battery
After turning the camera off, open the batterychamber cover, press the battery latch to the top,
and slide the battery out of the camera as shown.
First Steps
Battery latch
C Caution
Turn the camera off before removing the battery.
7
Inserting a Memory Card
Although the camera can store pictures in internal memory, SD memory cards (sold separately) can
be used to store additional pictures.
When no memory card is inserted, d appears in the monitor and internal memory is used for recording
and playback. Note that because camera malfunction could cause internal memory to become
corrupted, the pictures in internal memory should periodically be transferred to a computer and
saved on the computer hard disk or on removable media such as CDs or DVDs. The pictures in
internal memory can also be copied to a memory card (see page 67). To prevent internal memory
from becoming full, be sure to delete pictures when they are no longer needed.
When a memory card is inserted as described below, the card will be used for recording and playback.
■ Compatible Memory Cards
SanDisk SD and SDHC memory cards have been tested and approved for use in the camera. A
complete list of approved memory cards is available at http://www.fujifilm.com/products/digital_
cameras/index.html. Operation is not guaranteed with other cards. The camera can not be used with
MultiMediaCard (MMC) or xD-Picture cards.
C Caution
Memory cards can be locked, making it impossible to format the card or to record
or delete images. Before inserting a memory card, slide the write-protect switch to
the unlocked position.
Write-protect switch
8
Inserting a Memory Card
■ Inserting a Memory Card
3 Close the battery-chamber cover.
1 Open the battery-chamber cover.
First Steps
the memory card.
2 Insert
Holding the memory card in the orientation
shown below, slide it all the way in.
Removing Memory Cards
Be sure the camera is off before opening the batterychamber cover. Press the card in and then release it
slowly. The card can now be removed by hand.
Battery
Be sure card is in correct
orientation; do not insert
at an angle or use force.
Gold contacts
C Cautions
• The memory card may spring out if you remove
your finger immediately after pushing the card in.
• Memory cards may be warm to the touch after
being removed from the camera. This is normal
and does not indicate a malfunction.
9
Inserting a Memory Card
C Cautions
• Format memory cards before first use, and be sure to reformat all memory cards after using them in a
computer or other device. For more information on formatting memory cards, see page 76.
• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory
card, seek medical assistance immediately.
• Do not use miniSD or microSD adapters that expose the back of the card. Failure to observe
this precaution may cause damage or malfunction. Adapters that are larger or smaller than
the standard dimensions of an SD card may not eject normally; if the card does not eject,
take the camera to an authorized service representative. Do not forcibly remove the card.
• Do not turn the camera off or remove the memory card while the memory card is being formatted or data are
being recorded to or deleted from the card. Failure to observe this precaution could damage the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of memory card.
• The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the
repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in which pictures are stored.
Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image
files. Always use the camera to delete pictures from memory cards and internal memory; before editing or
renaming files, copy them to a computer and edit or rename the copies, not the originals.
10
Turning the Camera on and Off
Shooting Mode
Playback Mode
Press the n button to turn the camera on.
The lens will extend and the lens cover will open.
To turn the camera on and begin playback, press
the D button for about a second.
First Steps
Press n again to turn the camera off.
B Tip: Switching to Playback Mode
Press the D button to start playback. Press the
shutter button halfway to return to shooting mode.
Press the D button again to turn the camera off.
B Tip: Switching to Shooting Mode
To exit to shooting mode, press the shutter button
halfway. Press the D button to return to playback.
C Cautions
• Pictures can be affected by fingerprints and other
marks on the lens. Keep the lens clean.
• The n button does not completely disconnect
the camera from its power supply.
B Tip: Auto Power Off
The camera will turn off automatically if no operations are performed for the length of time selected in the
AUTO POWER OFF menu (see page 76).
11
Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 71).
1 Choose a language.
2 Set the date and time.
START
RT MENU
/ LANG.
DATE / TIME NOT SET
2011
2010
YY.MM.DD
2009
2008
2007
SET
SE
NO
1.1 Press the selector up, down,
left, or right to highlight a
language.
1.2 Press MENU/OK.
SET
1. 1 12 : 00
AM
NO
2.1 Press the selector left or right
to highlight the year, month,
day, hour, or minute and press
up or down to change. To change the
order in which the year, month, and day
are displayed, highlight the date format
and press the selector up or down.
2.2 Press MENU/OK.
B Tip: The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the language-selection
dialog will be displayed when the camera is turned on. If the battery is left in the camera for about 30 minutes,
the battery can be removed for about 24 hours without resetting the clock or language selection.
12
Taking Pictures in k (Auto) Mode
This section describes how to take pictures in k mode.
the camera on.
1 Turn
Press the n button to turn the
the battery level.
2 Check
Check the battery level in the monitor.
camera on.
q
e
r
Indicator
Description
Battery partially discharged.
q (white)
Battery more than half discharged.
w (white)
(red)
Low battery. Charge as soon as
e
possible.
r (blinks red) Battery exhausted. Turn camera off
and charge battery.
Basic Photography and Playback
B Tip: Intelligent Face Detection
The first time the camera is turned on, Intelligent Face
Detection is automatically activated and the camera is
optimized for taking portrait photographs. For more
information on using Intelligent Face Detection, see
page 18.
w
13
Taking Pictures in k (Auto) Mode
the picture.
3 Frame
Position the main subject in the focus area
and use the zoom buttons to frame the
picture in the monitor.
Press W to zoom out
Press T to zoom in
Holding the Camera
Hold the camera steady
with both hands and brace
your elbows against your
sides. Shaking or unsteady
hands can blur your shots.
To prevent pictures that
are out of focus or too dark
(underexposed), keep your
fingers and other objects
away from the lens and
flash.
Zoom indicator
Zoom in using optical
zoom, or use digital zoom
(pg. 75) to zoom in closer.
B Tip: Focus Lock
Use focus lock (pg. 21) to focus on subjects that are not in the focus frame.
14
Taking Pictures in k (Auto) Mode
Framing Guideline
The images change as shown below if you press the
DISP/BACK button.
4 Focus.
Press the shutter button halfway to focus on
the main subject in the focus frame.
Indicators
displayed
Indicators
hidden
Best framing
To use the best framing, position the main subject
at the intersection of two lines or align one of the
horizontal lines with the horizon. Use focus lock (pg.
21) to focus on subjects that will not be in the center
of the frame in the final photograph.
F3.3
Camera selects small
focus frame and
Press
focuses on subject
halfway
If the camera is able to focus, it will beep twice
and the indicator lamp will glow green.
If the camera is unable to focus, the focus frame
will turn red, a R indicator will appear
in the monitor, and the indicator lamp will
blink green. Change the composition or
use focus lock (pg. 21).
Basic Photography and Playback
1 / 250
Focus frame
A Note
The lens may make a noise when the camera focuses.
This is normal.
15
Taking Pictures in k (Auto) Mode
5 Shoot.
Smoothly press the shutter
The Indicator Lamp
button the rest of the way down
to take the picture.
B Tip: The Shutter Button
The shutter button has
two positions. Pressing the
shutter button halfway (q)
sets focus and exposure;
to shoot, press the shutter
button the rest of the way
down (w).
Double
beep
q
Indicator lamp
CLICK
w
A Note
If the subject is poorly lit, the flash may fire when the
picture is taken. To take pictures without the flash,
choose another flash mode (pg. 24).
The indicator lamp shows camera status as follows:
Indicator lamp
Camera status
Glows green Focus locked.
Camera shake warning, AF warning,
Blinks green
or AE warning (ready to shoot)
Blinks green Recording pictures. Additional
and orange pictures can be taken.
Recording pictures. No additional
Glows
orange pictures can be taken at this time.
Flash charging; flash will not fire when
Blinks orange
picture is taken.
Blinks red Recording or lens error.
B Tip: Warnings
Detailed warnings appear in the monitor. See pages
86–89 for more information.
16
Viewing Pictures
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results.
1 Press the D button.
100-0001
N
ISO 100
ERASE OK?
OK
CANCEL
SET
12 / 31 / 2050 10 : 00 AM
250
F3.3
additional pictures.
2 View
Press the selector right to view
pictures in the order recorded,
left to view pictures in reverse
order.
To delete the picture, press the selector
left to highlight OK and press MENU/OK.
To exit without deleting the picture,
highlight CANCEL and press MENU/OK.
B Tip: The Playback Menu
Pictures can also be deleted from the playback
menu (pg. 36).
Basic Photography and Playback
The most recent picture will be displayed in
the monitor.
Deleting Pictures
To delete the picture
currently displayed in
the monitor, press the
selector up (A). The
following dialog will be
displayed.
Press the shutter button to exit to shooting
mode.
17
Intelligent Face Detection and Red-Eye Removal
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for
group portraits to prevent the camera from focusing on the background. Intelligent Face Detection
also offers a red-eye removal option for removing “red-eye” effects caused by the flash.
Intelligent Face Detection on.
1 Turn
1.1 Press MENU/OK to display the
1.4 Press the selector up or down
to highlight the desired option.
shooting menu.
SHOOTING MENU
SHOOTING MODE
More on Photography
18
FACE DETECTION
ISO
AUTO
QUALITY
CONTINUOUS
N
OFF
1.2 Press the selector up or
down to highlight c FACE
DETECTION.
1.3 Press the selector right
to display Intelligent Face
Detection options.
Option
B ON
S ON
B ON
S OFF
OFF
Description
Intelligent Face Detection and red-eye
removal on. Use with the flash.
Intelligent Face Detection on; red-eye
removal off.
Intelligent Face Detection and red-eye
removal off.
1.5 Press MENU/OK to select the
highlighted option and return
to shooting mode.
B icon appears in monitor
when Intelligent Face
Detection is on.
Intelligent Face Detection and Red-Eye Removal
the picture.
2 Frame
If a face is detected, it will
be indicated by a green
border. If there is more
than one face in the
frame, the camera will
Green border
select the face closest
to the center; other faces are indicated by
white borders.
3 Focus.
Press the shutter button halfway
to set focus and exposure for the
subject in the green border.
More on Photography
C Cautions
• If no face is detected when the shutter button
is pressed halfway (pg. 82), the camera will
focus on the subject at the center of the
monitor and red-eye will not be removed.
• In each shooting mode, the camera will detect
and focus on faces but exposure will be
optimized for the entire scene rather than the
selected portrait subject.
19
Intelligent Face Detection and Red-Eye Removal
4 Shoot.
Press the shutter button all the
way down to shoot.
C Caution
If the subject moves as the shutter button is
pressed, their face may not be in the area
indicated by the green border when the picture
is taken.
REMOVING
If B ON/S ON is
selected, the picture
will be processed to
reduce red-eye before it
is recorded (the b REDEYE REMOVAL option in the playback
menu can also be used to reduce red-eye;
pg. 64).
20
Intelligent Face Detection
Intelligent Face Detection is
recommended when using the
self-timer for group- or selfportraits (pp. 26–27).
7
The camera can zoom in on pictures taken with
Intelligent Face Detection during slide shows (pg.
65) and when pictures are displayed automatically
after shooting (pg. 73).
Focus Lock
To compose photographs with off-center subjects:
1 Position the subject in the focus frame.
the picture.
3 Recompose
Keeping the shutter button pressed
halfway, recompose the picture.
2 Focus.
Press the shutter button halfway to set
Press
halfway
250
F3.3
F3.3
4 Shoot.
Press the shutter-release button the rest of
the way down to take the picture.
Press the rest of
the way down
More on Photography
focus and exposure. Focus and exposure
will remain locked while the shutter button
is pressed halfway (AF/AE lock).
250
Repeat steps 1 and 2 as desired to refocus
before taking the picture.
21
Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects
listed below. If the camera is unable to focus using autofocus, use focus lock (pg. 21) to focus on another
subject at the same distance and then recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
•
•
•
•
Subjects photographed through a window or other reflective object.
Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
Insubstantial subjects, such as smoke or flame.
Subjects that show little contrast with the background (for example, subjects in clothing that is the same
color as the background).
• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
22
L Macro mode (Close-ups)
To select macro mode, press the selector left (L).
L icon appears in monitor when
camera is in macro mode
When macro mode is in effect, the camera focuses on subjects near the center of the monitor. Use
the zoom buttons to frame pictures.
A Note
Use of a tripod is recommended to prevent blur caused by camera shake.
More on Photography
To exit macro mode, press the selector left (L). Macro mode can also be cancelled by turning the
camera off or selecting another shooting mode.
23
K Using the Flash
Use the flash when lighting is poor, for example when shooting at night or indoors under low light.
To choose a flash mode, press the selector right (K). The flash mode
changes each time the selector is pressed; in modes other than AUTO, the
current mode is indicated by an icon in the monitor. Choose from the
following options (some options are not available in all shooting modes;
see the restrictions in another supplied document):
Mode
Description
AUTO (no icon) The flash fires when required. Recommended in most situations.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural coloration
K (fill flash)
when shooting in bright light.
W (suppressed The flash does not fire even when the subject is poorly lit. 0 will appear in the monitor at
flash)
slow shutter speeds to warn that pictures may be blurred. Use of a tripod is recommended.
Capture both the main subject and the background when shooting at night (note that
T (slow sync) brightly lit scenes may be overexposed). If U is selected for a SHOOTING MODE, shutter
speed may be slow. Use a tripod.
If the flash will fire, X will be displayed in the monitor when the shutter button is pressed halfway.
C Caution
The flash may fire several times with each shot. Do not move the camera until shooting is complete.
24
K Using the Flash
Red-Eye Removal
When B ON/S ON is selected for
Intelligent Face Detection (pg. 18), redeye removal (S) is available in AUTO
(V), fill flash (U), and slow sync (Z)
modes. Red-eye removal minimizes “redeye” caused when light from the flash
is reflected from the subject’s retinas as
shown in the illustration at right.
( Silent Mode
In situations in which camera sounds or light from
the flash may be unwelcome, press the DISP/BACK
button until ( is displayed in the monitor.
More on Photography
The camera speaker, shooting indicator, flash, and
indicator and self-timer lamps turn off. Flash and
volume settings (pg. 75) can not be adjusted while
silent mode is in effect. To restore normal operation,
press the DISP/BACK button until the ( icon is no
longer displayed.
25
J Using the Self-Timer
The camera offers a ten-second timer that allows photographers to appear in their own photographs,
and a two-second timer that can be used to avoid blur caused by the camera moving when the
shutter button is pressed.
the timer.
1 Set
The current self-timer mode is displayed in the monitor. To choose a different setting, press the
selector down (J). The selection changes each time the selector is pressed.
The current self-timer mode is
displayed in the monitor.
c : The picture is taken after 10
seconds.
b : The picture is taken after 2
seconds.
2 Focus.
Press the shutter button halfway to focus.
C Caution
Stand behind the camera when using the shutter button. Standing in front
of the lens can interfere with focus and exposure.
the timer.
3 Start
Press the shutter button the rest of the way down to start the timer.
The display in the monitor shows the number of seconds remaining
until the shutter is released. To stop the timer before the picture is
taken, press DISP/BACK.
26
9
J Using the Self-Timer
The self-timer lamp on the front of the camera will
blink immediately before the picture is taken. If
the two-second timer is selected, the self-timer
lamp will blink as the timer counts down.
More on Photography
Intelligent Face Detection
Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 18) is
recommended when using the self-timer for group portraits or self-portraits. To use the self-timer with
Intelligent Face Detection, set the timer as described in Step 1 and then press the shutter button all the way
down to start the timer. The camera will detect faces while the timer is counting down and adjust focus
and exposure immediately before the shutter is released. Be careful not to move until the picture has been
recorded.
27
a Shooting Mode
Choose a shooting mode according to the scene or type of subject.
Selecting a Shooting Mode
MENU/OK to display the
1 Press
shooting menu.
A Note
See the restrictions in another supplied document for
flash mode setting.
SHOOTING MENU
SHOOTING MODE
FACE DETECTION
AUTO
ISO
QUALITY
N
CONTINUOUS
OFF
the selector up or down to
2 Press
highlight a SHOOTING MODE.
the selector right to display
3 Press
shooting mode options.
MANUAL
SCENE RECOGNITION
AUTO
BABY MODE
Automatic mode
setting according to
shooting conditions.
SET
CANCEL
the selector up or down to
4 Press
highlight the desired mode.
28
MENU/OK to select the
5 Press
highlighted option.
a Shooting Mode
Shooting Modes
M MANUAL
Choose this mode for complete control
of shooting settings, including exposure
compensation (pg. 59) and white balance (pg.
60).
Icon
PORTRAIT
H
LANDSCAPE
I
NIGHT
J
MACRO
K
BACKLIGHT
PORTRAIT
T
NIGHT
PORTRAIT
Z
Description
For soft-toned portraits with
natural skin tones.
For crisp, clear daylight shots of
buildings and landscapes.
For night and twilight scenes, a
using high sensitivity setting to
minimize blurring.
For clear close-ups of flowers,
etc.
For a subject backlit against the
sun, preventing the background
from becoming dim.
For a subject in a dim place,
reducing blur.
B Tip
When a subject can not be analyzed by the camera,
LAUTO mode will be set.
More on Photography
G SCENE RECOGNITION
Simply by pointing the camera to the subject,
the camera automatically analyzes and selects
the most appropriate setting using scene
recognition.
The camera analyzes a
subject based on scene
recognition, then an icon
appears in the bottom
left of the monitor (The
illustration shows when the
camera analyzed subject(s) in portrait.).
Subject
A Notes
• B Intelligent Face Detection is turned on
automatically.
• The camera continuously adjusts focus on a face, or
the center area of the monitor.
• Continuous auto focus will be audible and will
increase battery drain.
• Macro mode is set when K is set.
29
a Shooting Mode
k AUTO
Choose for crisp, clear snapshots (pg. 13). This
mode is recommended in most situations.
p BABY MODE
Choose for natural skin tones when taking
portraits of infants. The flash turns off
automatically.
C PICTURE STABILIZATION
Choose this mode for fast shutter speeds that
reduce blur caused by camera shake or subject
movement.
U PORTRAIT
Choose this mode for soft-toned portraits with
natural skin tones.
K LANDSCAPE
Choose this mode for crisp, clear daylight shots
of buildings and landscapes.
30
L SPORT
Choose this mode when photographing moving
subjects. Priority is given to faster shutter
speeds.
D NIGHT
A high sensitivity setting is selected
automatically to minimize blurring for recording
night and twilight scenes.
U NIGHT (TRIPOD)
Slow shutter speeds are used to record night
scenes. Use of a tripod is recommended to
prevent camera shake.
B NATURAL LIGHT
Capture natural light indoors, under low light, or
where the flash can not be used. The flash turns
off and sensitivity is raised to reduce blur.
G BEACH
Choose for crisp, clear shots that capture the
brightness of sunlit beaches.
a Shooting Mode
F SNOW
Choose for crisp, clear shots that capture the
brightness of scenes dominated by shining white
snow.
E SUNSET
Choose this mode to record the vivid colors in
sunrises and sunsets.
O FLOWER
Choose for vivid close-ups of flowers. The
camera focuses in the macro range and the flash
turns off automatically.
A Note
Photography may be prohibited altogether in some
settings. Obtain permission before shooting.
P TEXT
Take clear pictures of text or drawings in print.
The camera focuses in the macro range.
More on Photography
W FIREWORKS
Slow shutter speeds are used to capture the
expanding burst of light from a firework. Press
the selector left or right to choose a shutter
speed. Use of a tripod is recommended to
prevent blur. The flash turns off automatically.
H MUSEUM
Choose where flash photography is prohibited
or the sound of the shutter may be unwelcome.
The flash, speaker, and self-timer lamp turn off
automatically.
I PARTY
Capture indoor background lighting under lowlight conditions.
31
Single-Frame Playback
To view the most recent picture in the monitor,
press the D button.
100-0001
0001
N
Choosing a Display Format
Press the DISP/BACK button to cycle through playback
display formats as shown below.
ISO 100
12 / 31 / 2050 10:00 AM
250 F4.2
More on Playback
Press the selector right to view pictures
in the order recorded, left to view
pictures in reverse order. Keep the
selector pressed to scroll rapidly to the desired
frame.
100 0001
100-0001
N
ISO 100
12 / 31 / 2050 10 : 00 AM
250
F4.2
Indicators
displayed
12/31
A Note
Pictures taken using other cameras are indicated by a e (“gift image”) icon during playback.
32
Indicators
hidden
2050
1/13
Sort by date
Single-Frame Playback
Playback Zoom
Press T to zoom in on images
displayed in single-frame
playback; press W to zoom out.
Press W to zoom out
A Note
The maximum zoom ratio varies with image size.
Playback zoom is not available with pictures taken at
an image size of p.
Press T to zoom in
Zoom indicator
Navigation window shows
portion of image currently
displayed in monitor
More on Playback
When the picture is zoomed in, the
selector can be used to view areas of
the image not currently visible in the
display.
Press DISP/BACK to exit zoom.
33
Multi-Frame Playback
To change the number of images
displayed, press W when a
picture is shown full-frame in the
monitor.
100-0001
N
ISO 100
12 / 31 / 2050
Press the
W button
to increase
the number
of pictures
displayed to
two, nine, or a
hundred.
10 : 00 AM
Press T to reduce
the number
of images
displayed.
Use the selector to highlight images and press
MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press
the selector up or down to view more pictures.
34
Sort by Date
In single-frame playback, press DISP/
1 BACK
until the sort-by-date screen is
displayed.
The picture displayed in
the single-frame playback
remains selected.
2050
12/31
1/13
the selector up or down to
2 Press
select a date.
B Tips: Rapid Scroll
• Press and hold the selector up or down to scroll
dates rapidly.
• Press and hold the selector left or right to rapidly
scroll pictures taken on the same date.
More on Playback
the selector left or right to
3 Press
select a picture.
35
A Deleting Pictures
The ERASE option in the playback menu can be used to delete still pictures and movies, increasing
the amount of space available on the memory card or in internal memory (for information on
deleting pictures in single-frame playback, see page 17). Note that deleted pictures can not be
recovered. Copy important pictures to a computer or other storage device before proceeding.
MENU/OK to display the
1 Press
playback menu.
the selector up or down to
4 Press
highlight FRAME or ALL FRAMES.
PLAYBACK MENU
ERASE
RED EYE REMOVAL
SLIDE SHOW
MENU/OK to display options for
5 Press
the selected item (see pg. 37).
PRINT ORDER (DPOF)
PROTECT
the selector up or down to
2 Press
highlight ERASE.
the selector right to display
3 Press
delete options.
PLAYBACK MENU
ERASE
BACK
RED EYE REMOVAL FRAME
ALL FRAMES
SLIDE SHOW
PRINT ORDER (DPOF)
PROTECT
36
B Tips: Deleting Pictures
• When a memory card is inserted, pictures will be
deleted from the memory card; otherwise, pictures
will be deleted from internal memory.
• Protected pictures can not be deleted. Remove
protection from any pictures you wish to delete (pg.
66).
• If a message appears stating that the selected
images are part of a DPOF print order, press MENU/OK
to delete the pictures.
A Deleting Pictures
■ FRAME
FRAME:: Deleting Selected Images
Selecting FRAME displays the
dialog shown at right.
■ ALL FRAMES
FRAMES:: Deleting All Images
ERASE ALL OK?
Selecting ALL FRAMES
IT MAY TAKE A WHILE
displays the confirmation
shown at right.
ERASE OK?
YES
CANCEL
Press the selector left or right to scroll
through pictures and press MENU/OK to
delete the current picture (the picture
is deleted immediately; be careful not
delete the wrong picture).
CANCEL
Press MENU/OK to delete all
unprotected pictures.
The dialog shown at right is
displayed during deletion.
Press DISP/BACK to cancel
before all pictures have been
deleted (any pictures deleted
before the button was pressed
can not be recovered).
CANCEL
More on Playback
Press DISP/BACK to exit when all the desired
pictures have been deleted.
YES
37
A Recording Movies
Shoot short movies at 30 frames per second. Sound is recorded via the built-in microphone; do not
cover the microphone during recording.
MENU/OK to display the shooting menu
1 Press
and select A MOVIE for a SHOOTING
MODE (pg. 28).
the scene using the
2 Frame
zoom buttons.
12s
STANDBY
12s
STANDBY
Time available
is displayed in
monitor
Zoom indicator
Zoom can not be adjusted once recording
begins.
Movies
38
Choosing the Frame Size
SHOOTING MENU
To choose the frame size,
SHOOTING MODE
99m59s
press MENU/OK and select
999m59s
QUALITY
k QUALITY. Choose t
SET-UP
(640 × 480 pixels) for better
quality, s (320 × 240
pixels) for longer movies. Press MENU/OK to return
to movie recording mode.
A Recording Movies
the shutter button all the way
3 Press
down to start recording.
REC
12s
REC and time
remaining are
displayed in monitor
the shutter button to end
4 Press
recording. Recording ends
automatically when the movie
reaches maximum length or
memory is full.
B Tip
There is no need to keep the shutter button pressed
during recording.
A Note
Focus is set when recording begins; exposure and
white balance are adjusted automatically throughout
recording. The color and brightness of the image may
vary from that displayed before recording begins.
Movies
39
D Viewing Movies
During playback (pg. 32),
movies are displayed in the
monitor as shown at right.
The following operations can
be performed while a movie
is displayed:
Operation
Start/pause
playback
End
playback/
delete
100-006
15s
12 / 31 / 2050
PLAY
10 : 00 AM
Description
Press the selector down to start playback.
Press again to pause.
Press the selector up to end playback. If
playback is paused, pressing the selector
up will delete the current movie.
Press the selector right to advance, left to
Advance/ rewind. If playback is paused, the movie
rewind will advance or rewind one frame each
time the selector is pressed.
Press MENU/OK to pause playback and
display volume controls. Press the
Adjust
selector up or down to adjust the
volume
volume; press MENU/OK again to resume
playback.
40
Progress is shown in the monitor during
playback.
Progress bar
STOP
PAUSE
C Cautions
• Do not cover the speaker during playback.
• Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
Viewing Pictures on TV
Connect the camera to a TV and tune the television to the video channel to show pictures to a group.
Connect an A/V cable (optional), as shown below.
Connect yellow plug
to video-in jack
Insert into A/V cable
connector
Connect white plug
to audio-in jack
Press D for about a second to turn the camera on. The camera monitor turns off and pictures and
movies are played back on the TV. Note that the camera volume controls have no effect on sounds
played on the TV; use the television volume controls to adjust the volume.
C Caution
When making the A/V cable connection, be sure the connectors are fully inserted.
Connections
A Note
Image quality drops during movie playback.
41
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
Connecting the Camera
Printing Selected Pictures
the supplied USB cable as shown
1 Connect
and turn the printer on.
the selector left or right to
1 Press
display a picture you wish to print.
the selector up or down to
2 Press
choose the number of copies (up to
99).
2
Press the D button for about a second to
turn the camera on. w USB will be displayed
in the monitor, followed by the PictBridge
display shown below at right.
USB
to display a confirmation dialog
when settings are complete.
PRINT THESE FRAMES
TOTAL: 9 SHEETS
PICTBRIDGE
TOTAL: 00000
00 SHEETS
FRAME
OK
42
steps 1–2 to select
3 Repeat
additional pictures. Press MENU/OK
YES
SET
CANCEL
4 Press MENU/OK to start printing.
Printing Pictures via USB
B Tip: Printing the Date of Recording
To print the date of recording on pictures, press
DISP/BACK in steps 1–2 to display the PictBridge
menu (see “Printing the DPOF Print Order,” below).
Press the selector up or down to highlight PRINT
WITH DATE y and press MENU/OK to return to the
PictBridge display (to print pictures without the date
of recording, select PRINT WITHOUT DATE). The
date will not be printed if the camera clock was not
set when the picture was taken.
A Note
If no pictures are selected when the MENU/OK button is
pressed, the camera will print one copy of the current
picture.
Printing the DPOF Print Order
To print the print order created with C PRINT
ORDER (DPOF) in the playback menu (pg. 62):
display, press DISP/
1 InBACKthetoPictBridge
open the PictBridge menu.
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
the selector up or down to
2 Press
highlight x PRINT DPOF.
PRINT DPOF OK?
TOTAL: 9 SHEETS
YES
Connections
MENU/OK to display a
3 Press
confirmation dialog.
CANCEL
43
Printing Pictures via USB
4 Press MENU/OK to start printing.
During Printing
The message shown at right is
PRINTING
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
CANCEL
on the printer, printing may end
before the current picture has printed).
If printing is interrupted, press D to turn the camera
off and then on again.
Disconnecting the Camera
Confirm that “PRINTING” is not displayed in the
monitor and press D to turn the camera off.
Disconnect the USB cable.
44
A Notes
• Print pictures from internal memory or a memory
card that has been formatted in the camera.
• If the printer does not support date printing, the
PRINT WITH DATE y option will not be available
in the PictBridge menu and the date will not be
printed on the pictures in the DPOF print order.
• Default printer page size and print quality settings
are used when printing via direct USB connection.
Printing Pictures via USB
Creating a DPOF Print Order
The C PRINT ORDER (DPOF) option in the
playback menu can be used to create a digital
“print order” for PictBridge-compatible printers
(pg. 42) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is
standard that allows pictures to be printed
from “print orders” stored in internal
memory or on a memory card. The information in
the order includes the pictures to be printed and the
number of copies of each picture.
■ WITH DATE y// WITHOUT DATE
To modify the DPOF print order, select C PRINT
ORDER (DPOF) in the playback menu and press
the selector up or down to highlight WITH
DATE y or WITHOUT DATE.
PLAYBACK MENU
ERASE
WITH DATE
RED EYE REMOVALWITHOUT DATE
RESET ALL
SLIDE SHOW
PRINT ORDER (DPOF)
PROTECT
WITH DATE y: Print date of
recording on pictures.
WITHOUT DATE: Print pictures without
date.
Press MENU/OK and follow the steps below.
the selector left or right
1 Press
to display a picture you wish to
Connections
include in or remove from the print
order.
45
Printing Pictures via USB
the selector up or down to
2 Press
choose the number of copies (up to
99). To remove a picture from the
order, press the selector down until
the number of copies is 0.
PRINT ORDER (DPOF)
DPOF: 00001
Total number of prints
total number of prints is
4 The
displayed in the monitor. Press
MENU/OK to exit.
The pictures in the current
print order are indicated by a
x icon during playback.
100-0001
N
ISO 100
12 / 31 / 2050
Number of copies
01 SHEETS
FRAME
SET
steps 1–2 to complete the
3 Repeat
print order. Press MENU/OK to save
the print order when settings
are complete, or DISP/BACK to exit without
changing the print order.
46
10 : 00 AM
Printing Pictures via USB
■ RESET ALL
To cancel the current print order, select RESET ALL in the C PRINT ORDER
(DPOF) menu. The confirmation shown at right will be displayed; press MENU/OK to
remove all pictures from the order.
A Notes
• Remove the memory card to create or modify a print order for the pictures in internal
memory.
• Print orders can contain a maximum of 999 pictures.
• If a memory card is inserted containing a print order created by another camera, the
message shown at right will be displayed. Pressing MENU/OK cancels the print order; a new
print order must be created as described above.
RESET DPOF OK?
YES
CANCEL
RESET DPOF OK?
YES
NO
Connections
47
Viewing Pictures on a Computer
The supplied FinePixViewer software can be used to copy pictures to a computer, where they can be
stored, viewed, organized, and printed. Before proceeding, install FinePixViewer as described below.
The latest FinePixViewer is available at http://www.fujifilm.com/. Do NOT connect the camera to the
computer until installation is complete.
Installing FinePixViewer
FinePixViewer is available in a Windows version (FinePixViewer S) and a Macintosh version
(FinePixViewer). Installation instructions for Windows are on pages 48–50, those for the Macintosh on
pages 51–52.
Installing FinePixViewer S: Windows
Confirm that the computer meets the following system requirements:
1
Preinstalled versions of Windows Vista, Windows XP Home Edition (Service Pack 2), Windows XP Professional
(Service Pack 2), or Windows 2000 Professional (Service Pack 4)
• Windows Vista: 800 MHz Pentium 4 or better (3 GHz Pentium 4 or better recommended)
CPU • Windows XP: 800 MHz Pentium 4 or better (2 GHz Pentium 4 or better recommended)
• Windows 2000: 200 MHz Pentium or better
• Windows Vista: 512 MB or more (1 GB or more recommended)
RAM • Windows XP: 512 MB or more
• Windows 2000: 128 MB or more
Free disk A minimum of 450 MB required for installation with 600 MB available when FinePixViewer is running (15 GB or
space more recommended under Windows Vista, 2 GB or more recommended under Windows XP)
Video 800 × 600 pixels or more with 16-bit color or better (1,024 × 768 pixels or more with 32-bit color recommended)
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
Other • Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet
connection and e-mail software required to use e-mail option
OS
48
Viewing Pictures on a Computer
C Caution
Other versions of Windows are not supported. Operation is not guaranteed on home-built computers or
computers that have been upgraded from earlier versions of Windows.
2 Start the computer. Log in to an account with administrator privileges before proceeding.
3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows Vista
If an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed;
click Allow.
The installer will start automatically; click Installing FinePixViewer and follow the on-screen
instructions to install FinePixViewer S. Note that the Windows CD may be required during
installation.
Connections
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer from the Start menu
(Windows Vista/XP) or double-click the My Computer icon on the desktop (Windows 2000), then doubleclick the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.exe.
49
Viewing Pictures on a Computer
prompted to install Windows Media Player or DirectX, follow the on-screen instructions to
4 Ifcomplete
installation.
When prompted, remove the installer CD from the CD-ROM drive and click Restart to restart the
5 computer.
Store the installer CD in a dry location out of direct sunlight in case you need to reinstall the software. The version number is printed at the top of the CD label for reference when
updating the software or contacting customer support.
Installation is now complete. Proceed to “Connecting the Camera” on page 53.
50
Viewing Pictures on a Computer
Installing FinePixViewer: Macintosh
Confirm that the computer meets the following system requirements:
1
CPU
OS
RAM
Free disk space
Video
Other
PowerPC or Intel
Preinstalled versions of Mac OS X 10.3.9-10.5 (visit http://www.fujifilm.com/ for more information)
256 MB or more
A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running
800 × 600 pixels or more with thousands of colors or better
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet
connection and e-mail software required to use e-mail option
starting the computer and quitting any applications that may be running, insert the installer
2 After
CD in a CD-ROM drive. Double-click the FinePix CD icon on the desktop and double-click
Installer for Mac OS X.
installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter
3 An
an administrator name and password when prompted and click OK, then follow the on-screen
instructions to install FinePixViewer. Click Exit to quit the installer when installation is complete.
Connections
51
Viewing Pictures on a Computer
the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
4 Remove
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software. The version number
is printed at the top of the CD label for reference when updating the software or contacting
customer support.
Select Applications in the Finder Go menu to open the applications folder.
5 Double-click
the Image Capture icon and select Preferences… from the
Image Capture application menu.
The Image Capture preferences dialog will be displayed. Choose Other… in
the When a camera is connected, open menu, then select FPVBridge in
the “Applications/FinePixViewer” folder and click Open.
Select Quit Image Capture from the Image Capture application menu.
Installation is now complete. Proceed to “Connecting the Camera” on page 53.
52
Viewing Pictures on a Computer
Connecting the Camera
pictures you wish to copy are stored
1 Ifonthea memory
card, insert the card into the
camera (pg. 8). If no card is inserted, pictures
will be copied from internal memory.
C Caution
Loss of power during transfer could result in loss
of data or damage to internal memory or the
memory card. Check the battery level.
Turn the camera off and connect the supplied
2 USB
cable as shown, making sure the
connectors are fully inserted. Connect the
camera directly to the computer; do not use a
USB hub or keyboard.
the D button for about a second to
3 Press
turn the camera on. FinePixViewer will start
automatically and the “Save Image Wizard”
will be displayed. Follow the on-screen
instructions to copy pictures to the computer.
To exit without copying pictures, click
CANCEL.
C Caution
If FinePixViewer does not start automatically,
the software may not be correctly installed.
Disconnect the camera and reinstall the software.
For more information on using FinePixViewer,
select How to Use FinePixViewer in the
FinePixViewer Help menu.
Connections
A Note
The camera will not turn off automatically while connected to a computer.
53
Viewing Pictures on a Computer
C Cautions
• Use only memory cards that have been formatted
in the camera and contain pictures taken with
the camera. If a memory card containing a large
number of images is inserted, there may be a delay
before FinePixViewer starts and FinePixViewer may
be unable to import or save images. Use a memory
card reader to transfer pictures.
• Make sure the indicator lamp is out before turning
the camera off, disconnecting the USB cable or
pulling the memory card out. Failure to observe this
precaution could result in loss of data or damage to
internal memory or the memory card.
• Disconnect the camera before inserting or removing
memory cards.
• In some cases, it may not be possible to access
pictures saved to a network server using
FinePixViewer in the same way as on a standalone
computer.
• The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.
54
Disconnecting the Camera
After confirming that the indicator lamp is out,
follow the on-screen instructions to turn the camera
off and disconnect the USB cable.
Uninstalling FinePixViewer
Only uninstall FinePixViewer before reinstalling
the software or when it is no longer required.
After quitting FinePixViewer and disconnecting
the camera, drag the “FinePixViewer” folder from
“Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control
panel and use “Programs and Features” (Windows
Vista) or “Add/Remove Programs” (other versions
of Windows) to uninstall FinePixViewer. Under
Windows, one or more confirmation dialogs may be
displayed; read the contents carefully before clicking
OK.
The Shooting Menu
The shooting menu is used to adjust settings for a wide range of shooting conditions.
Using the Shooting Menu
MENU/OK to display the
1 Press
shooting menu.
the selector right to display
3 Press
options for the highlighted item.
SHOOTING MENU
SHOOTING MENU
SHOOTING MODE
SHOOTING MODE
FACE DETECTION
FACE DETECTION
ISO
QUALITY
CONTINUOUS
AUTO
N
OFF
A Note
The options displayed in the shooting menu vary
depending on the shooting mode.
the selector up or down to
2 Press
highlight the desired menu item.
ISO
AUTO
TOP 3
OFF
AUTO
N
AUTO
QUALITY
N
OFF
CONTINUOUS
OFF
the selector up or down to
4 Press
highlight the desired option.
MENU/OK to select the
5 Press
highlighted option.
Menus
55
The Shooting Menu
Shooting Menu Options
Menu item
Options
M/G/k/p/C/U/K/L/
Choose a shooting mode according to the
a SHOOTING MODE
D/U/B/G/F/W/E/O/
type of subject (pg. 28).
I/H/P/A
Turn Intelligent Face Detection and red-eye
B ON S ON / B ON S OFF /
c FACE DETECTION
removal on or off (pg. 18).
OFF
Adjust ISO sensitivity (pg. 57). Choose higher AUTO/ 1600 / 800 / 400 / 200 /
g ISO
values when the subject is poorly lit.
100
rF/rN/g3:2/o/n/
Choose image size and quality (pg. 58).
k QUALITY
m/p
Adjust exposure for bright, dark, or high–2 EV to +2 EV in increments of
d EXP. COMPENSATION
1/3 EV
contrast scenes (pg. 59).
Adjust color for different light sources (pg. 60).
e WHITE BALANCE
AUTO/p/q/s/t/u/r
Shoot a series of pictures (pg. 61).
c CONTINUOUS
m/OFF
Perform basic camera setup such as choosing
a language and setting the time and date (pg.
j SET-UP
A/K/L/M
71).
56
Description
Default
k
B ON
S ON
AUTO
rN
±0
AUTO
OFF
—
The Shooting Menu
g ISO
Control the camera’s sensitivity to light with M. Higher values can be used to reduce blur when
lighting is poor; note, however, that mottling may appear in pictures taken at high sensitivities. If
AUTO is selected, the camera will adjust sensitivity automatically in response to shooting conditions.
Settings other than AUTO are shown by an icon in the monitor if you use M.
M
N
17
ISO 100
Menus
57
The Shooting Menu
k QUALITY
Choose the size and quality at which still pictures
are recorded. Large pictures can be printed at
large sizes with no drop in quality; small pictures
require less memory, allowing more pictures to
be recorded.
Aspect Ratio
Pictures taken at an image quality setting of g3:2
have an aspect ratio of 3 : 2, the same as a frame of
35-mm film. Pictures taken at other settings have an
aspect ratio of 4 : 3.
3:2
Option
Prints at sizes up to
rF 31 × 23 cm/12 × 9 in. (r) or 31 × 21 cm/
rN 12 × 8 in. (g3:2). Choose rF for highquality prints, g3:2 for an aspect ratio of
g3:2 3 : 2.
o 22 × 16 cm (8.5 × 6.5 in.)
n 17 × 13 cm (7 × 5 in.)
m 14 × 10 cm (5.3 × 4 in.)
5 × 4 cm (2 × 1.5 in.). Suited to e-mail or the
p
web.
The number of pictures that can be taken at
current settings (pg. 91) is displayed to the right
of the image quality icon in the monitor.
58
4:3
3:2
A Note
Image quality is not reset when the camera is turned
off or another shooting mode is selected.
The Shooting Menu
d EXP. COMPENSATION
Use exposure compensation when
photographing very bright, very dark, or highcontrast subjects.
Choose positive (+) values
to increase exposure
Choosing an Exposure Compensation Value
• Backlit subjects: choose values
from +2/3 EV to +12/3 EV (for an
explanation of the term “EV”,
see the Glossary on page 90)
• Highly reflective subjects or very
bright scenes (e.g., snowfields):
+1 EV
Choose negative (–) values
to reduce exposure
• Scenes that are mostly sky: +1 EV
• Spotlit subjects (particularly if photographed against
dark backgrounds): –2/3 EV
• Subjects with low reflectivity (pine trees or darkcolored foliage): –2/3 EV
Menus
A Note
At settings other than ±0, a 5 icon is displayed in the monitor. Exposure compensation is not reset when the
camera is turned off; to restore normal exposure control, choose a value of ±0.
59
The Shooting Menu
e WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation of “white
balance,” see the Glossary on page 90).
Option
AUTO
p
q
s
t
u
r
Description
White balance adjusted automatically.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
If AUTO does not produce the desired results
(for example, when taking close-ups), choose the
option that matches the light source.
A Note
Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
60
The Shooting Menu
c CONTINUOUS (Continuous shooting)
Select m TOP 3 to capture motion in a series of pictures. The camera takes up to three pictures
while the shutter-release button is pressed.
A Notes
• Frame rate varies with shutter speed.
• Focus and exposure are determined by the first frame in each series.
• The number of pictures that can be recorded depends on the memory available.
Additional time may be required to record pictures when shooting ends. The pictures are
displayed in the monitor while recording is in progress.
STORING
Menus
61
The Playback Menu
The playback menu is used to manage the pictures in internal memory or on the memory card.
Using the Playback Menu
1
Press D to enter playback mode
(pg. 32).
the selector right to display
4 Press
options for the highlighted item.
PLAYBACK MENU
ERASE
MENU/OK to display the
2 Press
playback menu.
PLAYBACK MENU
ERASE
RED EYE REMOVAL
BACK
RED EYE REMOVAL FRAME
ALL FRAMES
SLIDE SHOW
PRINT ORDER (DPOF)
PROTECT
the selector up or down to
5 Press
highlight the desired option.
SLIDE SHOW
PRINT ORDER (DPOF)
PROTECT
3
62
Press the selector up or down to
highlight the desired menu item.
MENU/OK to select the
6 Press
highlighted option.
The Playback Menu
Playback Menu Options
The following options are available:
Option
AERASE
bRED-EYE REMOVAL
BSLIDE SHOW
CPRINT ORDER (DPOF)
EPROTECT
FCOPY
DIMAGE ROTATE
HTRIMMING
jSET-UP
Description
Delete all or selected pictures (pg. 36).
Create copies with reduced red eye (pg. 64).
View pictures in a slide show (pg. 65).
Select pictures for printing on DPOF- and PictBridge-compatible devices (pg. 45).
Protect pictures from accidental deletion (pg. 66).
Copy pictures between internal memory and a memory card (pg. 67).
Rotate pictures (pg. 69).
Create cropped copies of pictures (pg. 70).
Perform basic camera setup (pg. 71).
Menus
63
The Playback Menu
b RED EYE REMOVAL
This option is used with pictures taken using Intelligent Face Detection to create copies that have
been processed to remove red eye.
the picture back in the monitor (pictures
MENU/OK. The message shown
1 Play
2 Press
taken with Intelligent Face Detection are
below at left will be displayed while
indicated by a B icon) and select b RED
EYE REMOVAL in the playback menu (pg. 62).
REMOVAL OK?
the camera analyses the image;
if red-eye is detected, the message shown
below at right will be displayed while the
camera processes the image to create a copy
with reduced red-eye.
DETECTING
YES
REMOVING
CANCEL
CANCEL
A Notes
• Red eye may not be removed if the camera is unable to detect a face or the face is in profile. Results may differ
depending on the scene. Red eye can not be removed from pictures that have already been processed using
red-eye removal or pictures created with other devices.
• The amount of time needed to process the image varies with the number of faces detected.
• Copies created with b RED EYE REMOVAL are indicated by a l icon during playback.
64
The Playback Menu
B SLIDE SHOW
PLAYBACK MENU
View pictures in an automated
ERASE
NORMAL
slide show. Choose the type
RED EYE REMOVAL NORMAL
WIPE
SLIDE SHOW
WIPE
of show and press MENU/OK
PRINT ORDER (DPOF)
to start. Press DISP/BACK at
PROTECT
any time during the show to
view on-screen help. When a movie is displayed,
movie playback will begin automatically, and the
slide show will continue when the movie ends.
The show can be ended at any time by pressing
MENU/OK.
Option
Description
Press
selector
left
or right to go back or
NORMAL
skip ahead one frame. Select WIPE for
WIPE
wipe transitions between frames.
As above, except that camera
NORMAL B
automatically zooms in on faces
selected with Intelligent Face detection
WIPE B
(pg. 18).
A Note
The camera will not turn off automatically while a
slide show is in progress.
Menus
65
The Playback Menu
E PROTECT
Protect pictures from accidental deletion. The
following options are available.
■ FRAME
Protect selected pictures.
the selector left or right to
1 Press
display the desired picture.
UNPROTECT OK?
PROTECT OK?
YES
CANCEL
Picture not protected
YES
CANCEL
Protected picture
MENU/OK to protect the
2 Press
picture. If the picture is already
protected, pressing MENU/OK will
remove protection from the image.
steps 1–2 to protect
3 Repeat
additional images. Press DISP/BACK
to exit when the operation is
complete.
66
■ SET ALL
Press MENU/OK to protect all
pictures, or press DISP/BACK to
exit without changing picture
status.
■ RESET ALL
Press MENU/OK to remove
protection from all pictures, or
press DISP/BACK to exit without
changing picture status.
SET ALL OK?
IT MAY TAKE A WHILE
YES
CANCEL
RESET ALL OK?
IT MAY TAKE A WHILE
YES
CANCEL
If the number of pictures
affected is very large, the
display at right will appear
in the monitor while the
CANCEL
operation is in progress.
Press DISP/BACK to exit before the operation is
complete.
C Caution
Protected pictures will be deleted when the memory
card or internal memory is formatted (pg. 76).
The Playback Menu
F COPY
Copy pictures between internal memory and a memory card.
the selector up or down to
1 Press
highlight d INTERNAL MEMORY
g x CARD (copy pictures from
internal memory to the memory card) or
x CARD g d INTERNAL MEMORY (copy
pictures from a memory card to internal
memory).
the selector right to display
2 Press
options for the highlighted item.
COPY
CARD
INTERNAL MEMORY
CARD
CARD
FRAME
INTERNAL MEMORY
ALL FRAMES
YES
CANCEL
the selector up or down to
3 Press
highlight FRAME or ALL FRAMES.
4 Press MENU/OK.
B Tip: Copying Pictures Between Memory Cards
To copy pictures between two memory cards, insert
the source card and copy the pictures to internal
memory, then remove the source card, insert the
destination card, and copy the pictures from internal
memory.
Menus
67
The Playback Menu
■ FRAME
Copy selected frames.
COPY OK?
100-0001
YES
the selector left or right to
1 Press
display the desired picture.
2 Press MENU/OK to copy the picture.
steps 1–2 to copy additional
3 Repeat
images. Press DISP/BACK to exit
when the operation is complete.
68
CANCEL
■ ALL FRAMES
Press MENU/OK to copy all
pictures, or press DISP/BACK to
exit without copying pictures.
COPY ALL OK?
100-0001
IT MAY TAKE
A WHILE
YES
CANCEL
C Cautions
• Copying ends when the destination is full.
• DPOF print information is not copied (pg. 45).
The Playback Menu
D IMAGE ROTATE
IMAGE ROTATE
By default, pictures taken in
tall orientation are displayed
in wide orientation. Use this
option to display pictures in
SET
CANCEL
the correct orientation in the
monitor. It has no effect on pictures displayed
on a computer or other device.
the selector down to
1 Press
rotate the picture 90 ° clockwise,
up to rotate the picture 90 °
counterclockwise.
A Notes
• Protected pictures can not be rotated. Remove
protection before rotating pictures (pg. 66).
• The camera may not be able to rotate pictures
created with other devices.
To rotate a picture, play the picture back and
select D IMAGE ROTATE in the playback menu
(pg. 62).
MENU/OK to confirm the
2 Press
operation (to exit without rotating
the picture, press DISP/BACK).
Menus
The next time the picture is played back, it will
automatically be rotated.
69
The Playback Menu
H TRIMMING
To create a cropped copy of a picture, play the picture back and select H TRIMMING in the playback
menu (pg. 62).
the zoom buttons to zoom in and out
1 Press
and use the selector to scroll the picture
MENU/OK. A confirmation
2 Press
dialog will be displayed.
until the desired portion is displayed (to exit
to single-frame playback without creating a
cropped copy, press DISP/BACK).
Zoom indicator
TRIMMING
YES
CANCEL
Navigation
window shows
portion of image
currently displayed
in monitor
REC OK?
REC
CANCEL
Copy size (o, n, m, or p; see page
58) is shown at the top; if the size is p, OK
is displayed in yellow. Larger crops produce
larger copies; all copies have an aspect ratio
of 4 : 3.
MENU/OK to save the cropped
3 Press
copy to a separate file.
70
The Setup Menu
Using the Setup Menu
the setup menu.
1 Display
1.1 Press MENU/OK to display the
menu for the current mode.
1.2 Press the selector up or down
to highlight j SET-UP.
1.3 Press the selector right to
display the setup menu.
settings.
3 Adjust
3.1 Press the selector up or down
to highlight a menu item.
3.2 Press the selector right
to display options for the
highlighted item.
SET-UP
FORMAT
/LANG
SET-UP
IMAGE DISP.
FRAME NO.
DIGITAL ZOOM
LCD POWER SAVE
1.5 SEC
CONT.
OFF
ON
a page.
2 Choose
2.1 Press the selector left or right
2.2 Press the selector down to
enter the menu.
5 MIN
ENGLISH
2 MIN
2 MIN
OFF
NTSC
3.3 Press the selector up or down
to highlight an option.
3.4 Press MENU/OK to select the
highlighted option.
Menus
to choose a page.
AUTO POWER OFF
TIME DIFFERENCE
VIDEO SYSTEM
71
The Setup Menu
Setup Menu Options
Menu item
Description
Options
Default
Choose how long pictures are displayed after CONTINUOUS / 3 SEC / 1.5 SEC /
1.5 SEC
a IMAGE DISP.
shooting (pg. 73).
ZOOM (CONTINUOUS) / OFF
Choose how files are named (pg. 74).
CONTINUOUS / RENEW
CONTINUOUS
b FRAME NO.
A
Enable or disable digital zoom (pg. 75).
ON / OFF
OFF
c DIGITAL ZOOM
Enable or disable monitor power saving (pg.
ON / OFF
ON
a LCD POWER SAVE
75).
Set the camera clock (pg. 12).
—
—
e DATE/TIME
d OPERATION VOL. Adjust the volume of camera controls.
q (high) / m (mid) /
m
K e SHUTTER VOLUME Adjust the volume of the shutter sound.
n (low) / o (mute)
—
7
f PLAYBACK VOLUME Adjust the volume for movie playback (pg. 75).
—
0
g LCD BRIGHTNESS Control the brightness of the monitor (pg. 75).
Format internal memory or memory cards
—
—
m FORMAT
(pg. 76).
Choose a language (pg. 12).
See page 93
ENGLISH
nw
L o AUTO POWER OFF Choose the auto power off delay (pg. 76).
5 MIN / 2 MIN / OFF
2 MIN
k
k/j
p TIME DIFFERENCE Set the clock to local time (pg. 77).
Choose a video mode for connection to a TV
NTSC / PAL
—
r VIDEO SYSTEM
(pg. 41).
Reset all settings except Frame number,
DATE/TIME, TIME DIFFERENCE, and VIDEO SYSTEM
M s RESET
to default values. A confirmation dialog will
—
—
be displayed, press the selector left or right to
highlight OK and press MENU/OK.
72
The Setup Menu
a IMAGE DISP.
Choose an option other than OFF to display pictures in the monitor after shooting. Pictures can
be displayed for 1.5 s (1.5 SEC), 3 s (3 SEC), or until the MENU/OK button is pressed (CONTINUOUS
and ZOOM (CONTINUOUS)). If ZOOM (CONTINUOUS) is selected, photos taken at qualities larger
than p can be zoomed in to check focus and other fine details (see page 33). If Intelligent Face
Detection is on (pg. 18), the camera will automatically zoom in on the face used to set focus and
exposure; press the selector down to cycle through the other faces detected. Note that ZOOM
(CONTINUOUS) is disabled during continuous shooting (pg. 61), and that the colors displayed at
settings of 1.5 SEC and 3 SEC may differ from those in the final picture.
Menus
73
The Setup Menu
b FRAME NO.
New pictures are stored in image files named using a four-digit file
Frame
number
number assigned by adding one to the last file number used. The file
100-0001
number is displayed during playback as shown at right. FRAME NO.
File
controls whether file numbering is reset to 0001 when a new memory
number
card is inserted or the current memory card or internal memory is
Directory
formatted.
number
• CONTINUOUS: Numbering continues from the last file number used or the
first available file number, whichever is higher. Choose this option to reduce the number of pictures
with duplicate file names.
• RENEW: Numbering is reset to 0001 after formatting or when a new memory card is inserted.
A Notes
• If the frame number reaches 999-9999, the shutter release will be disabled (pg. 88).
• Selecting s RESET (pg. 72) does not reset frame numbering.
• Frame numbers for pictures taken with other cameras may differ.
74
The Setup Menu
a LCD POWER SAVE
If ON is selected, the monitor will dim to save
power if no operations are performed for
several seconds. Full brightness can be restored
by pressing the shutter button halfway. The
monitor does not dim in movie mode or during
playback.
c DIGITAL ZOOM
If ON is selected, pressing T at the maximum
optical zoom position will trigger digital zoom,
further magnifying the image. To cancel digital
zoom, zoom out to the minimum digital zoom
position and press W.
AUTO
f PLAYBACK VOLUME
Press the selector up or down
to choose volume for movie
playback and press MENU/OK to
select.
Zoom
indicator
Zoom indicator,
DIGITAL ZOOM off
W
Zoom indicator,
DIGITAL ZOOM on
T W
Optical zoom
Optical zoom
T
Digital
zoom
7
SET
CANCEL
LCD BRIGHTNESS
0
SET
CANCEL
Menus
C Caution
Digital zoom produces lower quality images than
optical zoom.
g LCD BRIGHTNESS
Press the selector up or down
to choose monitor brightness
and press MENU/OK to select.
VOLUME
75
The Setup Menu
m FORMAT
FORMAT
Format internal memory or a
FORMAT OK?
memory card. If a memory
ERASE ALL DATA
card is inserted in the camera,
OK
CANCEL
x will be displayed in the
SET
dialog shown at right and
this option will format the memory card. If no
memory card is inserted, d will be displayed
and this option will format internal memory.
Press the selector left to highlight OK and press
MENU/OK to begin formatting.
C Cautions
• All data—including protected pictures—will be
deleted. Be sure important files have been copied to
a computer or other storage device.
• Do not open the battery cover during formatting.
76
o AUTO POWER OFF
Choose the length of time before the camera
turns off automatically when no operations
are performed. Shorter times increase battery
life; if OFF is selected, the camera must be
turned off manually. Note that regardless of the
option selected, the camera will not turn off
automatically when connected to a printer (pg.
42) or computer (pg. 53) or when a slide show is
in progress (pg. 65).
B Tip: Reactivating the Camera
To reactivate the camera after it has turned off
automatically, press the n button or press the
D button for about a second (pg. 11).
The Setup Menu
p TIME DIFFERENCE
When travelling, use this option to switch the camera clock instantly from your home time zone to
the local time at your destination.
the difference between local time
1 Specify
and your home time zone.
1.1 Press the selector up or down
to highlight j LOCAL.
1.2 Press the selector right to
display the time difference.
TIME DIFFERENCE
12 / 31 / 2050 10:00 AM
12 / 31 / 2050 10:00 AM
00
SET
:
between local time and your
2 Switch
home time zone.
To set the camera clock to local time,
highlight j LOCAL and press MENU/OK.
To set the clock to the time in your home
time zone, select k HOME. If j LOCAL
is selected, j will be displayed in the
monitor for three seconds after the camera
enters shooting mode, and the date will be
displayed in yellow.
00
CANCEL
12 / 31 / 2050
10 : 00 AM
After changing time zones, check that the
date and time are correct.
Menus
1.3 Press the selector left or right
to highlight +, –, hours, or
minutes; press up or down to
edit. The minimum increment
is 15 minutes.
1.4 Press MENU/OK when settings
are complete.
77
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
■ Computer Related
■ Audio/Visual
TV (available from
third-party suppliers)
USB
Audio/visual
output
Computer (available from
third-party suppliers)
■ Printing
USB
Technical Notes
78
PictBridge-compatible printer
(available from third-party
suppliers)
SD/SDHC
memory card
Printer (available
from third-party
suppliers)
SD card slot or card reader
Optional Accessories
Accessories from Fujifilm
The following optional accessories were available from FUJIFILM. For the latest information on the
accessories available in your region, check with your local Fujifilm representative or visit http://www.
fujifilm.com/products/digital_cameras/index.html.
• NP-45 rechargeable Li-ion battery (supplied): Additional NP-45 slimline batteries can be
purchased as required.
• AV-C1 A/V cable: Connects the camera and a TV.
Technical Notes
79
Troubleshooting
Power and Battery
Problem
Possible cause
The battery is exhausted.
The camera does
not turn on.
The battery is not in the correct orientation.
The battery-chamber cover is not latched.
Power
supply
The battery is cold.
The battery runs
There is dirt on the battery terminals.
down quickly.
The camera is in G mode.
The battery has been charged many times.
Troubleshooting
80
The camera turns
off suddenly.
Charging does
not start.
Charging is slow.
The battery is exhausted.
The battery is not correctly inserted.
The battery is not in the correct orientation.
The temperature is low.
There is dirt on the battery terminals.
Battery
charger The charging
lamp lights, but
the battery does The battery has been charged many times.
not charge.
Solution
Page
Charge the battery or insert a fully-charged
4, 6
spare battery.
Re-insert the battery in the correct orientation. 6
Latch the battery-chamber cover.
7
Warm the battery by placing it in a pocket
or other warm place and re-insert it in the
—
camera immediately before taking a picture.
Clean the terminals with a soft, dry cloth.
—
Choose a different shooting mode.
29
The battery has reached the end of its
—
charging life. Purchase a new battery.
Charge the battery or insert a fully-charged
4, 6
spare battery.
Re-insert the battery in the charger.
6
Re-insert the battery in the correct orientation. 6
Charge the battery at room temperature.
5
Clean the terminals with a soft, dry cloth.
—
The battery has reached the end of its
charging life. Purchase a new battery. If
—
the battery still fails to charge, contact your
FUJIFILM dealer.
Troubleshooting
Menus and Displays
Problem
Menus and displays are
not in English.
Possible cause
Solution
English is not selected for the n w
Select ENGLISH.
option in the setup menu.
Page
12
Shooting
Problem
Possible cause
Memory is full.
Taking
pictures
Memory is not formatted.
No picture is
taken when the There is dirt on the memory card contacts.
shutter button is The memory card is damaged.
pressed.
The battery is exhausted.
The camera has turned off automatically.
Focus
The flash has fired.
The subject is close to the camera.
The camera does
The subject is far away from the camera.
not focus.
The subject is not suited to autofocus.
The monitor may darken while the flash
charges. Wait for the flash to charge.
Select macro mode.
Cancel macro mode.
Use focus lock.
Page
8, 36
76
9
8
4, 6
11, 76
24
23
21
Troubleshooting
The monitor
goes dark after
shooting.
Solution
Insert a new memory card or delete pictures.
Format the memory card or internal
memory.
Clean the contacts with a soft, dry cloth.
Insert a new memory card.
Charge the battery or insert a fully-charged
spare battery.
Turn the camera on.
81
Troubleshooting
Problem
Face detection
not available.
Intelligent No face is
detected.
Face
Detection
Wrong subject
selected.
Close-ups
82
Macro mode is
not available.
Possible cause
Solution
The camera is in a shooting mode which
Choose a different shooting mode.
makes Intelligent Face Detection unavailable.
The subject’s face is obscured sunglasses, a
Remove the obstructions.
hat, long hair, or other objects.
Change the composition so that the
The subject’s face occupies only a small area
subject’s face occupies a larger area of the
of the frame.
frame.
The subject’s head is tilted or horizontal.
Ask the subject to hold their head straight.
The camera is tilted.
Hold the camera straight.
The subject’s face is poorly lit.
Shoot in bright light.
Recompose the picture or turn face
The selected subject is closer to the center
detection off and frame the picture using
of the frame than the main subject.
focus lock.
The camera is in a shooting mode which
Choose a different shooting mode.
makes macro (close-up) mode unavailable.
Page
28
18
14
—
21
28
Troubleshooting
Problem
The flash does
not fire.
Flash
Possible cause
The flash is charging.
The camera is in a shooting mode in which
the flash does not fire.
The battery is exhausted.
The camera is in continuous mode.
The camera is in silent mode.
The flash is off (W).
The camera is in a shooting mode which
makes some flash modes unavailable.
The camera is in silent mode.
Choose a different shooting mode.
Charge the battery or insert a fully-charged
spare battery.
Select OFF for c CONTINUOUS.
Turn silent mode off .
Choose a different flash mode.
Page
16
28
4, 6
61
25
24
Choose a different shooting mode.
28
Turn silent mode off .
25
Position the subject in range of the flash.
93
Hold the camera correctly.
Clean the lens.
Keep objects away from the lens.
Check focus before shooting.
Use the flash or a tripod.
This is normal and does not indicate a
malfunction. Choose a lower sensitivity.
14
97
14
15, 21,
86
24
57
Troubleshooting
Some flash
modes are not
available.
The flash does
The subject is not in range of the flash.
not fully light the
The flash window is obstructed.
subject.
The lens is dirty.
The lens is blocked.
Pictures are
R is displayed during shooting and the
Problem blurred.
focus frame is displayed in red.
images
0 is displayed during shooting.
Pictures are
The ambient temperature is high and the
mottled.
subject is poorly lit.
Solution
Wait for the flash to charge.
83
Troubleshooting
Playback
Problem
Pictures are
grainy.
Possible cause
The pictures were taken with a different
make or model of camera.
Pictures
The pictures were taken at an image size of
Playback zoom
p or with a different make or model of
unavailable.
camera.
Playback volume is too low.
No sound in
Audio
The microphone was obstructed.
movie playback.
The speaker is obstructed.
Selected pictures Some of the pictures selected for deletion
Deletion
are not deleted. are protected.
File numbering
The battery-chamber cover was opened
Frame no. is unexpectedly
while the camera was on.
reset.
Solution
Page
—
—
—
—
Adjust playback volume.
40, 75
Hold the camera correctly during recording. 38
Hold the camera correctly during playback.
40
Remove protection using the device with
66
which it was originally applied.
Turn the camera off before opening the
battery-chamber cover to replace the
11, 74
battery or insert a memory card.
Connections
Problem
TV
No picture or
sound.
No color.
84
Possible cause
The camera is not properly connected.
The supplied A/V cable was connected
during movie playback.
Input on the television is set to “TV”.
The camera is not set to the correct video
standard.
The volume on the television is too low.
The camera is not set to the correct video
standard.
Solution
Connect the camera correctly.
Connect the camera once movie playback
has ended.
Set input to “VIDEO”.
Match the camera r VIDEO SYSTEM
setting to the TV.
Adjust the volume.
Match the camera r VIDEO SYSTEM
setting to the TV.
Page
41
40, 41
—
41, 72
—
41, 72
Troubleshooting
Problem
The computer
does not
Computer
recognize the
camera.
Pictures can not
be printed.
Only one copy is
PictBridge
printed.
The date is not
printed.
Possible cause
Solution
Page
The camera is not properly connected.
Connect the camera correctly.
53
The camera is not properly connected.
The printer is off.
Connect the camera correctly.
Turn the printer on.
42
—
The printer is not PictBridge-compatible.
—
—
Miscellaneous
Problem
Possible cause
Temporary camera malfunction.
Nothing happens when the
shutter button is pressed.
The battery is exhausted.
Temporary camera malfunction.
No sound.
The camera is in silent mode.
Page
6
4, 6
6
25
Troubleshooting
The camera does not
function as expected.
Solution
Remove and reinsert the battery.
Charge the battery or insert a fullycharged spare battery.
Remove and reinsert the battery. If the
problem persists, contact your FUJIFILM
dealer.
Turn silent mode off.
85
Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
O (red)
N (blinks red)
0
Description
Low battery.
Battery exhausted.
Slow shutter speed. Picture may be blurred.
R
(displayed in red with The camera can not focus.
red focus frame)
j
(blinks red)
The subject is too bright or too dark. The
picture will be over- or under-exposed.
If the subject is dark, use the flash.
Camera malfunction.
Turn the camera off and then on again, taking care not
to touch the lens. If the message persists, contact a
FUJIFILM dealer.
FOCUS ERROR
ZOOM ERROR
NO CARD
CARD NOT INITIALIZED
PROTECTED CARD
BUSY
86
Solution
Charge the battery or insert a fully-charged spare
battery.
Use the flash or mount the camera on a tripod.
• Use focus lock to focus on another subject at the
same distance, then recompose the picture (pg. 21).
• If the subject is poorly lit, try focusing at a distance of
about 2 m (6 ft. 7 in.).
• Use macro mode to focus when taking close-ups.
No memory card inserted when COPY is
selected in the playback menu.
The memory card or internal memory is not
formatted.
Insert a memory card.
Format the memory card or internal memory (pg. 76).
Clean the contacts with a soft, dry cloth. If the
The memory card contacts require cleaning. message is repeated, format the memory card (pg. 76).
If the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer.
The memory card is locked.
Unlock the memory card (pg. 8).
The memory card is incorrectly formatted.
Use the camera to format the memory card (pg. 76).
Warning Messages and Displays
Warning
CARD ERROR
Description
The memory card is not formatted for use in
the camera.
The memory card contacts require cleaning
or the memory card is damaged.
Camera malfunction.
x MEMORY FULL
The memory card or internal memory is full;
d MEMORY FULL
INTERNAL MEMORY IS FULL pictures can not be recorded or copied.
INSERT A NEW CARD
Memory card error or connection error.
WRITE ERROR
Format the memory card (pg. 76).
Clean the contacts with a soft, dry cloth. If the
message is repeated, format the memory card (pg. 76).
If the message persists, replace the memory card.
Contact a FUJIFILM dealer.
Delete pictures or insert a memory card with more
free space.
Re-insert the memory card or turn the camera off
and then on again. If the message persists, contact a
FUJIFILM dealer.
Delete pictures or insert a memory card with more
free space.
Not enough memory remaining to record
additional pictures.
The memory card or internal memory is not
Format the memory card or internal memory (pg. 76).
formatted.
The file is corrupt or was not created with the
The file can not be played back.
camera.
Clean the contacts with a soft, dry cloth. If the
The memory card contacts require cleaning. message is repeated, format the memory card (pg. 76).
If the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer.
Troubleshooting
READ ERROR
Solution
87
Warning Messages and Displays
Warning
FRAME NO. FULL
Description
The camera has run out of frame numbers
(current frame number is 999-9999).
Date for which more than 4,999 pictures exist
selected in sort-by-date view.
CAN NOT EXECUTE
Red-eye reduction can not be applied to the
A CAN NOT EXECUTE selected picture or movie.
An attempt was made to delete or rotate a
PROTECTED FRAME
protected picture.
x NO IMAGE
The source device selected in the playback
COPY menu contains no pictures.
d NO IMAGE
p CAN NOT TRIM
An attempt was made to crop a p picture.
The picture selected for cropping is damaged
CAN NOT TRIM
or was not created with the camera.
The DPOF print order on the current memory
DPOF FILE ERROR
card contains more than 999 images.
CAN NOT SET DPOF
The picture can not be printed using DPOF.
A CAN NOT SET DPOF Movies can not be printed using DPOF.
CAN NOT ROTATE
The picture can not be rotated.
A CAN NOT ROTATE
Movies can not be rotated.
PRESS AND HOLD THE DISP An attempt was made to choose a flash
BUTTON TO DEACTIVATE mode or adjust the volume with the camera
SILENT MODE
in silent mode.
A connection error occurred while pictures
COMMUNICATION ERROR were being printed or copied to a computer
or other device.
TOO MANY FRAMES
88
Solution
Format the memory card and select RENEW for the
b FRAME NO. option in the j SETUP menu. Take
a picture to reset frame numbering to 100-0001,
then return to the b FRAME NO. menu and select
CONTINUOUS.
Choose a different date.
—
Remove protection before deleting or rotating
pictures.
Select a different source.
These pictures can not be cropped.
Copy the pictures to internal memory and create a
new print order.
—
—
—
—
Exit silent mode before choosing a flash mode or
adjusting the volume.
Confirm that the device is turned on and that the USB
cable is connected.
Warning Messages and Displays
Warning
PRINTER ERROR
PRINTER ERROR
RESUME?
CAN NOT BE PRINTED
Description
Printer out of paper or ink, or other printer
error.
An attempt was made to print a movie, a
picture not created with the camera, or a
picture in a format not supported by the
printer.
Solution
Check printer (see printer manual for details). To
resume printing, turn the printer off and then turn it
back on.
Check printer (see printer manual for details). If printing
does not resume automatically, press MENU/OK to resume.
Movies and some pictures created with other devices
can not be printed. If the picture was created with the
camera, check the printer manual to confirm that the
printer supports the JFIF-JPEG or Exif-JPEG format. If it
does not, the pictures can not be printed.
Troubleshooting
89
Glossary
Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details
visible using optical zoom are simply enlarged, producing a slightly “grainy” image.
DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders”
stored in internal memory or on a memory card. The information in the order includes the pictures to
be printed and the number of copies of each picture.
EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount
of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV
increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering
the camera can be controlled by adjusting aperture and shutter speed.
Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction
during printing.
JPEG (Joint Photographic Experts Group): A compressed file format for color images. The higher the compression
rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.
Motion JPEG: An AVI (Audio Video Interleave) format that stores images and sound in a single file, with the images
recorded in JPEG format. Motion JPEG files can be played in QuickTime 3.0 or later.
Smear: A phenomenon specific to CCDs which causes white streaks to appear when very bright light sources,
such as the sun or reflected sunlight, appear in the frame.
Appendix
90
WAV (Waveform Audio Format): A standard Windows audio file format. WAV files have the extension “*.WAV” and
may be compressed or uncompressed. The camera uses uncompressed WAV. WAV files can be played using
Windows Media Player or QuickTime 3.0 or later.
White balance: The human brain automatically adapts to changes in the color of light, with the result that objects
that appear white under one light source still appear white when the color of the light source changes. Digital
cameras can mimic this adjustment by processing images according to the color of the light source. This
process is known as “white balance.”
Internal Memory/Memory Card Capacity
The following table shows the recording time or number of pictures available at different image
qualities. All figures are approximate; file size varies with the scene recorded, producing wide
variations in the number of files that can be stored. The number of exposures or length remaining
may not diminish at an even rate.
SD card
Image size (pixels)
File size
Internal memory
(approx. 20 MB)
512 MB
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
rF
rN
3648 × 2736
4.9 MB
2.5 MB
o
n
m
p
g3:2
3648 × 2432 2592 × 1944 2048 × 1536 1600 × 1200 640 × 480
2.2 MB
1.2 MB
780 KB
630 KB
130 KB
SDHC card
3
7
8
13
19
26
90
95
190
390
790
1590
3190
6340
190
380
760
1520
3060
6140
12190
210
420
860
1720
3450
6930
13760
350
700
1400
2810
5650
11340
22610
480
960
1930
3870
7780
15600
30970
640
1280
2580
5160
10370
20800
41290
2220
4420
8850
17720
35560
71310
99990
t
640 × 480
—
s
320 × 240
—
13 s
31 s
6 min.
12 min.
25 min.
50 min. *
100 min. *
204 min. *
406 min. *
12 min.
28 min.
57 min.
116 min. *
229 min. *
467 min. *
927 min. *
* Total length of all movie files. Individual movies can not exceed 2 GB in size.
Appendix
91
Specifications
System
Model
Effective pixels
CCD
Storage media
File system
File format
Image size (pixels)
File size
Lens
Focal length
Digital zoom
Aperture
Focus range (distance from
front of lens)
Sensitivity
Metering
Exposure control
Exposure compensation
Scene modes
Image Stabilization
Intelligent Face Detection
92
FinePix J25/FinePix J20 digital camera
10 million
½.3 -in., square-pixel CCD with primary color filter
• Internal memory (approx. 20 MB)
• SD/SDHC memory cards (see page 8)
Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital Print Order Format
(DPOF)
• Still pictures: Exif 2.2 JPEG (compressed)
• Movies: Motion JPEG AVI
• rF: 3,648 × 2,736
• rN: 3,648 × 2,736 • g3:2 : 3,648 × 2,432 • o : 2,592 × 1,944
• n : 2,048 × 1,536
• m : 1,600 × 1,200
• p : 640 × 480
See page 91
Fujinon 3 × optical zoom lens, F/3.1 (wide angle) – 5.6 (telephoto)
f=6.3 mm–18.9 mm (35-mm format equivalent: 35.5 mm–106.5 mm)
Approx. 5.7 × (up to 17.1 × when combined with optical zoom)
Two steps
Approx. 40 cm (1.3 ft.) - infinity (wide angle); 40 cm (1.3 ft.) - infinity (telephoto)
Macro mode: approx. 10 cm-80 cm/3.9 in.-2.6 ft. (wide angle); 40 cm-80 cm/1.3 ft.-2.6ft. (telephoto)
Equivalent to ISO 100, 200, 400, 800, 1600; AUTO (Standard Output Sensitivity)
256-segment through-the-lens (TTL) metering
Programmed autoexposure
–2 EV – +2 EV in increments of 1/3 EV (M mode)
p(BABY MODE), C(ANTI-BLUR), U(PORTRAIT), K(LANDSCAPE), L(SPORT), D(NIGHT),
U(NIGHT(TRIPOD)), B(NATURAL LIGHT), G(BEACH), F(SNOW), W(FIREWORKS), E(SUNSET),
O(FLOWER), I(PARTY), H(MUSEUM), P(TEXT)
Available
Available
Specifications
System
Shutter speed
Continuous
Focus
White balance
Self-timer
Flash
Flash modes
Monitor (FinePix J20)
Monitor (FinePix J25)
Movies
Shooting options
Playback options
Appendix
Other options
¼ s–1/2,000 s (AUTO mode); 8 s–1/2,000 s (other modes); combined mechanical and electronic shutter
Up to three frames at a maximum of approximately 1 fps
• Mode: Single AF
• Autofocus system: Contrast-detect TTL AF
• Focus-area selection: AF CENTER
Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight
fluorescent, warm white fluorescent, cool white fluorescent, and incandescent lighting
Approx. 2 s and approx. 10 s
Flash type: Auto flash
Effective range: (g: AUTO)
Wide-angle: approx. 50 cm - 3.2 m (1.6 ft. - 10.5 ft.)
Telephoto: approx. 50 cm - 1.8 m (1.6 ft. - 5.9 ft.)
Macro: approx. 30 cm - 80 cm (11.8 in. - 2.6 ft.)
Auto, fill flash, off, slow sync (red-eye removal off ); auto with red-eye reduction, fill flash with redeye reduction, off, slow sync with red-eye reduction (red-eye removal on)
2.7-in., 230k-dot amorphous silicon TFT color LCD monitor; frame coverage approx. 96%
3.0-in., 230k-dot amorphous silicon TFT color LCD monitor; frame coverage approx. 96%
Camera can record movies with monaural sound and a frame size of 640 × 480 (t) or 320 × 240
(s) at a frame rate of 30 fps
Scene recognition, Intelligent Face Detection with red-eye removal, best framing, and frame
number memory
Intelligent Face Detection with red-eye removal, micro thumbnail, multi-frame playback, sort-bydate, cropping (still pictures only), slide show, and image rotation
PictBridge, Exif Print, language selection (Simplified Chinese, Traditional Chinese, Czech, Dutch,
English, French, German, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish,
Swedish, and Turkish), time difference
93
Specifications
Input/output terminals
A/V OUT (audio/video output)
Digital input/output
Power supply/other
Power sources
Battery life (NP-45)
Camera dimensions
Camera weight
(FinePix J20)
Camera weight
(FinePix J25)
Shooting weight
(FinePix J20)
Shooting weight
(FinePix J25)
Operating conditions
94
NTSC or PAL with monaural sound
USB 2.0 High Speed with MTP/PTP connection
NP-45 rechargeable battery
Approx. 165 frames, based on CIPA (Camera and Imaging Products Association) standard; measured at 23 °C
(73 °F) with the monitor on, pictures recorded to an SD memory card, the camera zoomed from
widest angle to maximum zoom and back once every 30 s, the flash fired at full power with every
other shot, and the camera turned off and then on again every 10 shots. Note that the number
of shots that can be taken with a fully-charged battery varies with temperature and shooting
conditions.
91.0 mm × 56.0 mm × 17.4 mm/3.6 in. × 2.2 in. × 0.7 in. (W × H × D), excluding projections
Approx. 96.5 g/3.4 oz., excluding battery, accessories, and memory cards
Approx. 100.0 g/3.5 oz., excluding battery, accessories, and memory cards
Approx. 113.1 g/4.0 oz., including battery and memory card
Approx. 116.6 g/4.1 oz., including battery and memory card
• Temperature: 0 °C – +40 °C/+32 °F – +104 °F
• Humidity: 85% or less (no condensation)
Specifications
NP-45 rechargeable battery
Nominal voltage
Nominal capacity
Operating temperature
Dimensions (W × H × D)
Weight
BC-45A battery charger
Rated input
Input capacity
Rated output
Supported batteries
Charging time
Dimensions (W × H × D)
(built-in plug model)
Dimensions (W × H × D)
(power cable model)
Weight (built-in plug model)
Weight (power cable model)
Operating temperature
DC 3.7 V
740 mAh
0 °C – +40 °C/+32 °F – +104 °F
31 mm × 39.4 mm × 5.7 mm/1.2 in. × 1.6 in. × 0.2 in.
Approx. 15 g/0.5 oz.
100–240 V AC, 50/60 Hz
7.0 VA (100 V)/10.8 VA (240 V)
4.2 V DC, 550 mA
NP-45 rechargeable batteries
Approx. 100 minutes (at +23 °C/+73 °F)
101.7 mm × 56 mm × 20 mm/4.0 in. × 2.2 in. × 0.8 in.
85 mm × 54 mm × 20 mm/3.3 in. × 2.1 in. × 0.8 in.
Approx. 66 g/2.3 oz., excluding battery
Approx. 56 g/2.0 oz., excluding battery
0 °C – +40 °C/+32 °F – +104 °F
Appendix
95
Specifications
Notes on the Battery and Battery Charger
• The battery and charger may become warm to the touch during charging. This is normal and does not
indicate a malfunction. If possible, charge the battery in a well-ventilated location.
• The battery charger may vibrate when in use. This is normal and does not indicate a malfunction.
• The charger is for use with NP-45 batteries only.
• If the charger causes radio interference, increase the distance between the charger and the radio receiver.
• Do not leave the charger in locations that are very dusty or exposed to strong vibration, extreme humidity, or
high temperatures (for example, in direct sunlight or next to a heater).
• The battery charger can be used with input voltages of 100–240 V AC and 50 or 60 Hz. The shape of the
plug varies with the country of sale; consult your travel agent to determine whether the charger can be used
abroad.
Color Television Systems
NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in
the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in
European countries and China.
Notices
• Specifications subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this manual.
• Although the monitor is manufactured using advanced high-precision technology, small bright points and
anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and
does not indicate a malfunction; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric fields, static
electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
96
Caring for the Camera
Appendix
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
■ Condensation
If the camera will not be used for an extended
Sudden increases in temperature, such as occur
period, remove the battery and memory card.
when entering a heated building on a cold day,
Do not store or use the camera in locations that
can cause condensation inside the camera. If
are:
this occurs, turn the camera off and wait an hour
• exposed to rain, steam, or smoke
before turning it on again. If condensation forms
• very humid or extremely dusty
on the memory card, remove the card and wait
• exposed to direct sunlight or very high
for the condensation to dissipate.
temperatures, such as in a closed vehicle on a
Cleaning
sunny day
Use a blower to remove dust from the lens and
• extremely cold
monitor, then gently wipe with a soft, dry cloth.
• subject to strong vibration
Any remaining stains can be removed by wiping
• exposed to strong magnetic fields, such as
gently with a piece of FUJIFILM lens-cleaning
near a broadcasting antenna, power line, radar
paper to which a small amount of lens-cleaning
emitter, motor, transformer, or magnet
fluid has been applied. Care should be taken to
• in contact with volatile chemicals such as
avoid scratching the lens or monitor. The camera
pesticides
body can be cleaned with a soft, dry cloth.
• next to rubber or vinyl products
Do not use alcohol, thinner, or other volatile
■ Water and Sand
chemicals.
Exposure to water and sand can also damage the
Travelling
camera and its internal circuitry and mechanisms.
Keep the camera in your carry-on baggage.
When using the camera at the beach or seaside,
Checked baggage may suffer violent shocks that
avoid exposing the camera to water or sand. Do
could damage the camera.
not place the camera on a wet surface.
97
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Download PDF

advertising