Suong Van HOA Curriculum vitae 

Suong Van HOA  Curriculum vitae 
Suong Van HOA

Curriculum vitae
CURRICULUM VITAE
Suong V. Hoa
Department of Mechanical and Industrial Engineering
Concordia University
1515 Ste. Catherine West # 4-145
Montreal, Quebec, Canada H3G 1M8
Tel.: (514) 848-2424 # 3139 E-mail: [email protected]
STATUS
Professor
Department of Mechanical and Industrial Engineering
Tenured, Full-Time
Concordia University Research Fellow, 2001
Concordia University Research Chair in Materials and Composites (2001-2015)
DEGREES
Ph.D., Mechanical Engineering, University of Toronto
Toronto, Ontario, 1976
M.A.Sc., Mechanical Engineering, University of Toronto
Toronto, Ontario, 1973
B.Sc., Mechanical Engineering, California State University
San Luis Obispo, 1971
DATE OF APPOINTMENT TO CONCORDIA UNIVERSITY September 1977
POSITION HELD AT CONCORDIA UNIVERSITY
June 2003-May 2007
July 1994-June 2000
May 1993- to date
1986-to date
1981 - May 1986
1977 - 1981
Chair, Department of Mechanical and Industrial Engineering
Chair, Department of Mechanical Engineering
Director, Concordia Centre for Composites
Professor of Mechanical Engineering
Associate Professor of Mechanical Engineering
Assistant Professor of Mechanical Engineering
POSITION AT OTHER UNIVERSITIES
1995 - 2000
1990-1995
Adjunct Professor, École de Technologie Supérieure, Quebec
Honorary Professor, Shanghai University of Technology
1
November 2013
Suong Van HOA

PROFESSIONAL REGISTRATION(S)
1981 - to date
1976 - 1983
Curriculum vitae
Ordre des ingénieurs du Québec
Association of Professional Engineers in Ontario
PROFESSIONAL & SCIENTIFIC SOCIETY MEMBERSHIP(S)
Member, Canadian Association for Composite Structures and Materials (1988-date)
Member, American Society of Mechanical Engineers (1978-date)
Member, Society for Advancement of Materials and Process Engineering (1990-date)
Member, Canadian Society for Mechanical Engineering (1977-1987) & (1995-date)
Member, American Society for Composites (2002-date)
SCHOLARLY & PROFESSIONAL ACTIVITIES
1. Session Vice-Chairman and Chairman, Information and Local Arrangements, Fifth World Congress
on the Theory of Machines and Mechanisms, 1979.
2. Session Co-Chairman, Fourth International Conference on Composite Materials, Tokyo, Japan,
October 1982.
3. Social Program Chairman, Tenth World Congress of the International Association of Mathematics
and Computer Simulation, Montreal, 1982.
4. Referee for the NSERC Strategic Grant application, 1984.
5. Member of the organizing committee, 7th International Conference on the Strength of Metals,
Montreal, 1985.
6. Co-Chairman, 2nd International Symposium on Acoustic Emission from Reinforced Plastics,
Montreal, July l986.
7. Co-Chairman, 1st International Conference on Analytical and Testing Methodologies for Design
with Advanced Materials, ATMAM '87, Montreal, August 1987.
8. Co-Chairman, ATMAM '89, Montreal, August 1989.
9. Member of International Advisory Committee, 3rd International Conference on Acoustic Emission
from Composite Materials, Paris, July 17-21, 1989.
10. Chairman, First Canadian International Conference and Exhibition on Composites, Montreal,
Canada, September 4-6, 1991.
11. Member, International Advisory Committee, Computer Aided Design in Composite Material
Technology III, IV, V, VI, VII, 1992, 1994, 1996, 1998, 2000.
12. Member, International Advisory Committee, 4th International Conference on Acoustic Emission
from Reinforced Composites, Seattle, July 1992.
13. Member, International Advisory Committee, 2nd International Conference on Composite Materials
and Structures, Beijing, China, August 1992.
14. Member, International Advisory Committee, 9th International Conference on Composite Materials
(ICCM-9), Madrid, Spain, July 1993.
15. Co-Chairman, Second Canadian International Conference on Composite Materials (CANCOM 93),
Ottawa, Canada, September 1993.
2
November 2013
Suong Van HOA
Curriculum vitae

16. Co-Chairman, International Conference on Design and Manufacturing Using Composites (ATMAM
94), Montreal, Canada, August 1994.
17. Member of FCAR grant selection committee for student applications, 1994.
18. Vice-Chairman, International Conference on Composite Materials (ICCM-10), Vancouver, Canada,
August 1995.
19. Member of FCAR grant selection committee, 1993-1996.
20. Co-Chairman, Canada-Japan Workshop on Composites, Kyoto, Japan, August 96.
21. Member of International Scientific Advisory Committee, International Conference on Advanced
Materials, Beijing, China, August 1996.
22. Member of International Scientific Committee, 5th International Conference on Computer Aided
Technology in Composites, Italy, 1996.
23. Member of NSERC grant selection committee, GSC 13 (Mechanical Engineering), 1994-1997.
24. Co-Chair, Second Canada-Japan workshop on Composites, Concordia University, Montreal, Canada,
August 1998.
25. Co-Chair, 6th International Conference on Computer Methods in Composite Materials Technology,
CADCOMP 98, Montreal, Canada, August 1998.
26. Member of Scientific Advisory Committee, International Conference on Testing of Materials, Hong
Kong University of Science and Technology, October 1998.
27. Member of International Scientific Advisory committee, CIMTEC 98.
28. Member of the American Society of Mechanical Engineers Boiler and Pressure Vessel Code, Section
X Committee, 1983-1993.
29. Member, Executive Committee, International Conference on Composite Materials, 1995-2001.
30. Member of NSERC Industrial Chair Evaluation for the Industrial Chair on Composites at University
of Alberta, 1996-2002.
31. Member of Scientific Advisory Committee, Polymer Composites 99 Symposium, Quebec October
1999.
32. Member of Scientific Advisory Committee, International Conference on Composite Materials, ICCM
13, Beijing, 2001.
33. Chair, 3rd Canadian International Conference on Composites, Montreal, August 2001.
34. Member, International Advisory Committee, 7th International Conference on Acoustic Emission from
Reinforced Plastics, Paris, July 2001.
35. Co-chair, 3rd Canada-Japan workshop on Composites, Kyoto, Japan, March 2000.
36. External Evaluator, Graduate Programs, Institute for Aerospace Studies, Uni. of Toronto, 2000.
37. External Evaluator, Graduate Program, Ryerson Polytechnic University, 2000.
38. Member, International Scientific Committee, 4th Canadian International Conference on Composites,
Ottawa, August 2003.
39. Member, International Scientific Committee, 14th International Conference on Composites, ICCM
14, San Diego, July 2003.
40. Co-Chair, 5th Canada-Japan workshop on Composites, Yonezawa, Japan, September 2004.
41. Member of International Scientific Committee, Canadian International Conference on Composites,
Vancouver, British Columbia, August 2005.
42. Member of Canadian Engineering Accreditation Board visiting team to evaluate the Mechanical
Engineering program at Laval University, February 2007.
3
November 2013
Suong Van HOA
Curriculum vitae

43. Co-chair, 6th Canada-Japan workshop on Composites, Toronto, Canada, August 24-26, 2006.
44. Co-chair, first US/Canada conference on composites, University of Delaware, September 2009.
45. Co-chair, second US/Canada conference on composites, Montreal, Canada, September 2011,
46. Chair, Symposium on Automated Composites Manufacturing, Montreal, April 2013.
47. Chair, 19th International Conference on Composite Materials, (ICM 19), Montreal, July 2013.
Journal editorial activities:
1. Member of the Editorial Board, Journal Composites Science and Technology, 2004- 2006.
2. Member of the Editorial Board, Journal of Thermoplastic Composites, 2008-date.
3. Member of the Editorial Board, Journal of Composite Materials, 2008-date.
4. Member of the Editorial Board, Journal of Sandwich Structures, 29007-date.
5. Editor in Chief, Journal of Science and Engineering of Composite Materials, June 2006-date.
INVITED SPEAKERS
5th International Symposium on Acoustic Emission from Composites, Sundsval, Sweden, July 1995.
Clarkson University, Department of Mechanical Engineering, May 1996.
Ecole Polytechnique Montreal, Department Genie Mecanique, July 1996.
National Research Council of Canada, Industrial Materials Institute, October 1996.
International Conference on Research on Materials, Cancun, Mexico, September 1997.
International Conference on Testing of Materials, Hong Kong, University of Science and
Technology, October 1998.
7. Journée des éléments finis, GIREF, Université Laval, May 1998.
8. Canadian Woodlands Conference, Montreal, March 1998.
9. SAMPE Quebec Chapter, March 1999.
10. National Research Council of Canada, Institute for Research in Aerospace, April 1999.
11. Second Conference on Emerging Technologies for Manufacturers, Natural Resources Canada,
February 2001.
12. Canada-France meeting on Composites at Les Journees Europeennes des Composites, April 2002.
13. International conference on Nanotechnology, Kyoto, Japan, February 2003.
14. Key note address. 2004 International Conference on Industrial Applications of Nanomaterials and
Advanced Composites, Hong Kong, February 2004.
15. Plenary address, American Society for Composites annual conference, Drexel University,
Philadelphia, September 2005.
16. West Virginia University (USA), Department of Chemical Engineering, October 2005.
17. Key note address, International Forum on Nanocomposites and Spring-8 (Synchrotron radiation
facility), Harima International Forum, Center for Advanced Science and Technology, Hyogo, Japan,
January 27, 2006.
18. Feature lecture, Polymer Nanocomposites Research in Canada, Joint ASC/SAMPE
conference, Memphis, Tennessee, September 2008.
19. High Performance Materials Institute, Department of Materials and Manufacturing Engineering,
Florida State University, Spring 2013.
4
November 2013
1.
2.
3.
4.
5.
6.
Suong Van HOA
Curriculum vitae

20. Key note lecture, 4th International conference on recent advances in composite materials
conference, Goa, India, February 2013.
21. Plenary lecture, 17th International conference on Composite Structures, Porto, Portugal, June 2013.
22. Shanghai Aircraft Manufacturing company. Ltd., November, 2013.
23. Dong Hua university, Department of Textile Engineering, November 2013
24. Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fujian, China,
November 2013.
25. Nanyang lecture, Xiaomen University, China, November 2013.
26. Key note lecture, Third International Symposium on Advanced Textile Science and Technology,
Zhejiang Sci-Tech University, Hangzhou, China, November 2013.
27. Invited lecture, China Aerospace Institute for Materials and Processing Technology, Beijing, July
2014.
28. Invited lecture, Nanjing University of Aeronautics and Astronautics, July 2014.
29. Invited lecture, International forum on advanced materials, Bari, Puglia, Italy, September 2014.
AWARDS AND DISTINCTION
1. Winner of Ralph R. Teetor Award, Society of Automotive Engineers, 1980.
2. Founder, First President, First Chair of the Board and Fellow, Canadian Association for
Composite Structures and Materials, CACSMA, 1988-91 and President: 1999-date.
3. Fellow, Canadian Association for Composite Structures and Materials, 1992.
4. Fellow, American Society of Mechanical Engineers, 1996.
5. Winner of the G.H. Duggan medal for Advanced Materials, Canadian Society for Mechanical
Engineering, 1996.
6. Fellow, Canadian Society for Mechanical Engineering, 1997.
7. Honorary Advisory Professor, Shanghai University of Technology, Shanghai, China, 1990-1995.
8. Concordia University Research Fellow, 2001.
9. Concordia University Research Chair in Materials and Composites, 2001-2015.
10. Winner of the NSERC Synergy Award for Innovation, October 2006.
11. Winner of the Prize Partenariat of the Association des Directeurs de Recherche Industrielle
du Quebec (ADRIQ), November 2006.
12. Fellow, Engineering Institute of Canada (ECI), 2007.
13. Recipient of the NanoAcademia award from Nanoquebec, 2008.
14. Recipient of the title Research Fellow, Pratt & Whitney Canada Ltd., 2008
15. Winner of the Prize Partenariat of the Association des Directeurs de Recherche Industrielle
du Quebec (ADRIQ), 2009.
16. Recognition of excellence, Association des Directeurs de recherche industrielle du Quebec
(ADRIQ), 2010.
17. Recipient of Agora trophy, Palais des Congres Montreal, October 2011.
18. Destech Award, American Society for Composites, September 2011.
19. NSERC Industrial Chair on Automated Composites Manufacturing, 2012-2017
20. Fellow, Canadian Academy of Engineering, 2013.
5
November 2013
Suong Van HOA

Curriculum vitae
PUBLICATIONS : Total number of refereed journal publications: 182
Total number of refereed conference proceedings and presentations: 331
Total number of patents:
10
Total number of code and standard contributions:
3
Total number of books:
6
Total number of conference proceedings edited:
19
Code and Standard:
3
Total number of commercialized computer programs: 2
A. LISTING OF REFEREED JOURNAL PUBLICATIONS
1. Tabarrok, B. and Hoa, S.V., "Thermal Stress Analysis of Plates and Shallow Shells by Hybrid Finite
Element Method", Journal of Strain Analysis, Vol. 9, No. 3, 1974, pp. 152-158.
2. McCammond, D. and Hoa, S.V., "Craze and Creep Resistance of High Impact Polystyrene in
Alcohols", Polymer Engineering & Science, Vol. 17, No. 12, December 1977, pp. 869-872.
3. McCammond, D. and Hoa, S.V., "Effects of some Liquids on the Creep Behaviour of High Impact
Polystyrene", Polymer Engineering & Science, Vol. 18, No. 11, August 1978, pp. 917-920.
4. Hoa, S.V., "Vibration of Curved Beam with Tip Mass", Journal of Sound and Vibration, 61(3), 1978,
pp. 427-436.
5. Hoa, S.V., "Vibration of a Rotating Beam with Tip Mass", Journal of Sound and Vibration, 67(3),
1979, pp. 369-381.
6. Hoa, S.V. and Sankar, S., "A computer Program for Automatic Generation of Stiffness and Mass
Matrices in Finite Element Analysis", Computers and Structures, Vol. 11, No. 3, 1980, pp. 147-161.
7. Sankar, S. and Hoa, S.V., "Finite Element-Extended Transfer Matrix Method for Free Vibration of
Plates", Journal of Sound and Vibration, Vol. 70, No. 1, 1980, pp. 205-211.
8. Hoa, S.V., "Relative Influence of the Mobility and the Solubility Parameters of Fluids on the
Mechanical Behaviour of High Impact Polystyrene", Polymer Engineering & Science, Vol. 20, No.
17, 1980, pp. 1157-1160.
9. Hoa, S.V., Hodges, D.H., and Rutkowski, M.J., "Comments on Vibration of a Rotating Beam with
Tip Mass", Journal of Sound and Vibration, Vol. 72, No. 2, 1980, pp. 547-549.
10. Hoa, S.V., "Effects of Liquid on the Stress Rupture Lives of Fiber Glass Reinforced Plastics", ASTM
Special Technical Publication 734, “Test Methods for Fibrous Composites”, 1981, pp. 411-419.
11. Hoa, S.V., "Vibration Frequency of a Curved Blade with Weighted Edge", Journal of Sound and
Vibration, Vol. 79, No. 1, November 8, 1981, pp. 107-119.
12. Hoa, S.V. and Ouellette, P., "Liquid Absorption of a Sheet Molding Compound", Polymer
Composites, Vol. 2, No. 4, October 1981, pp. 167-170.
13. Hoa, S.V., "Notched Strength of Sheet Molding Compounds", Polymer Composites, Vol. 2, No. 4,
October 1981, pp. 145-148.
14. Hoa, S.V., Ngo, A.D. and Sankar, T.S., "Fatigue Crack Propagation of Sheet Molding Compounds in
Various Environments", Polymer Composites, Vol. 2, No. 4, October 1981, pp. 162-166.
15. Hoa, S.V. and Feldman, D., "Joining Strength of Sheet Molding Compounds", Polymer Composites,
6
November 2013
Suong Van HOA
Curriculum vitae

Vol. 3, No. 1, January 1982, pp. 48-53.
16. Hoa, S.V., Ngo, A.D. and Sankar, T.S., "Effect of Water and Isoctane Absorption on the Flexural
Fatigue Strength of a Sheet Molding Compound", Polymer Composites, Vol. 3, No. 1, January 1982,
pp. 44-48.
17. Hoa, S.V., "Strain Analysis of Dual Laminate Cylindrical Fiber Reinforced Plastic Vessel", Journal
of Reinforced Plastics and Composites, July 1982, pp. 242-253.
18. Hoa, S.V. and Nguyen, Q.B., "Temperature Increase of SMC-R65 in Flexural Fatigue Test", Polymer
Composites, Vol. 4, No. 2, April 1983, pp. 85-89.
19. Hoa, S.V. and Ouellette, P., "Stress Corrosion Cracking of Polyvinylidene Fluoride in Sodium
Hydroxide", Polymer Engineering & Science, Vol. 23, No. 4, March 1983, pp. 202-205.
20. Hoa, S.V., Sankar, T.S., and Bargiora, R., "Tensile Behaviour of Laminates Used for Making Fiber
Reinforced Plastic Vessels", Journal of Reinforced Plastics and Composites, Vol. 2, No. 2, April
1983, pp. 118-129.
21. Feldman, D., Hoa, S.V., and Coriaty, E., "Bonding Strength of Sheet Molding Compounds", Polymer
Plastics Technology and Engineering, Vol. 23, No. 1, 1984, pp. 99-118.
22. Lucking, W.M., Hoa, S.V. and Sankar, T.S., "The Effect of Geometry on Interlaminar Stresses of
[0/90] Composite Laminates with Circular Holes", Journal of Composite Materials, Vol. 18, March
1984, pp. 174-188.
23. Hoa, S.V. and Ouellette, P., "Damping of Composite Materials", Polymer Composites, Vol. 5, No. 4,
Oct. 1984, pp. 334-338.
24. Hoa, S.V. and Maji, J., "Two-dimensional Bending and Extension of Cross-ply Laminates with
Different Moduli in Tension and Compression", Composite and Structures, Vol. 20, No. 6, 1985, pp.
921-928.
25. Ngo, A.D., Hoa, S.V., and Sankar, T.S., "Mechanisms of Fatigue Failure of Sheet Molding
Compounds in Different Environments", High Modulus Fiber Composites in Ground Transportation
and High Volume Applications, ASTM Special Technical Presentation #873, 1985.
26. Hoa, S.V., Yu, C.W. and Sankar, T.S., "Analysis of Filament Wound Vessel Using Finite Elements",
Composite Structures, Vol. 3, No. 1, 1985, pp. 1-18.
27. Hoa, S.V., Sankar, T.S., and Berczynski, W.S., "Buckling of Hand Lay Up Composite Cylindrical
Vessel", Journal of Reinforced Plastics and Composites, Vol. 4, No. 2, April 1985, pp. 162-172.
28. Ouellette, P. and Hoa, S.V., "Creep of Fiberglass Reinforced Plastic Pressure Vessels", Journal of
Reinforced Plastics and Composites, Vol. 4, No. 3, July 1985, pp. 287-296.
29. Ouellette, P., Hoa, S.V., and Sankar, T.S., "Buckling of Composite Cylinders under Internal
Pressure", Polymer Composites, Vol. 7, No. 5, Oct. 1986.
30. Natarajan, R., Hoa, S.V., and Sankar, T.S., "Stress Analysis of Filament Wound Tanks Using ThreeDimensional Finite Elements", International Journal for Numerical Methods in Engineering, Vol. 23,
1986, pp. 623-633.
31. Ouellette, P. and Hoa, S.V., "Fatigue of Glass Fiber Reinforced Polyester Laminates", Polymer
Composites, Vol. 7, No. 1, February 1986.
32. Blach, A.E. and Hoa, S.V., "Bolted Flange Connections for Glass Fiber Reinforced Plastic Pipes and
Pressure Vessels", Design Engineering, UK, May 1987.
33. Hoa, S.V., Di Maria, A., and Feldman, D., "Aluminum Inserts for Sheet Molding Compounds",
Composite Structures, Vol. 8, No. 4, 1987.
7
November 2013
Suong Van HOA
Curriculum vitae

34. Hoa, S.V., Daoust, J., Du, B.L., and Vu-Khanh, T., "Interlaminar Stresses in a Tapered Laminate",
Polymer Composites, Vol. 9, No. 5, October 1988.
35. Blach, A.E. and Hoa, S.V., "The Effects of Pull-Back on Stresses in FRP Flanges", Experimental
Techniques, Nov. 1988.
36. Hoa, S.V. and Li, L., "Acoustic Emission during Quasi-Static Loading/Hold/Unloading in Notched
Reinforced Fiber Composite Materials", Journal of Acoustic Emission, Vol. 7, No. 4, March 1989,
pp. 145-160.
37. Hoa, S.V., Lin, S. and Chen, J., "Effects of Moisture Content on the Mechanical Properties of
Polyphenylene Sulfide Composite Materials", Special Technical Publication on Thermoplastic
Composites, American Society for Testing and Materials, ASTM-STP 1044, 1989.
38. Hoa, S.V. and Mannarino, G., "Twisting of Filament Wound Cylinders under Internal Pressure",
Journal of Reinforced Plastics and Composites, Vol. 8, No. 1, January 1989, pp. 212-231.
39. Daoust, J. and Hoa, S.V., "Parameters Affecting Interlaminar Stresses in Tapered Laminates under
Static Loading Conditions", Polymer Composites, Vol. 10, No. 5, October 1989, pp. 374-83.
40. Daoust, J. and Hoa, S.V., "A Comprehensive Technique for Determination of Safety Factors in
Composites," Journal of Reinforced Plastics and Composites, Vol. 8, No. 6, November 1989, pp.
584-600.
41. Hoa, S.V., Journeaux, B., and Di Lalla, L., "Computer Aided Design for Composite Structures",
Composite Structures, Vol. 13, February 1989, pp. 67-79.
42. Blach, A.E., Hoa, S.V., Kwok, C.K., and Ahmed, A.K.W., "Rectangular Pressure Vessels of Finite
Length", ASME Journal of Pressure Vessel Technology, Vol. 112, Feb. 1990, pp. 50-56.
43. Lucking, W.M., Hoa, S.V. and Sankar, T.S., "A Boundary Collocation Method for Stress Analysis of
Laminated Edges", Computers and Structures, Vol. 34, No. 4, 1990, pp. 655-662.
44. Beshay, A. and Hoa, S.V., "Reinforcement of Polyvinyl Chloride (PVC) and Polystyrene (PS) with
Cellulosic Fibers Treated with Silane", Journal of Thermoplastic Composite Materials, Vol. 3, No. 4,
October 1990, pp. 264-74.
45. Ouellette, P., Hoa, S.V., and Li, L., "A Procedure for Acceptance Testing of FRP Balsa Wood Core
Pressure Vessels", Journal of Acoustic Emission, January-March 1990, pp. 37-43.
46. Xiao, X.R. and Hoa, S.V., "Effect of Melting History on the Crystallographic Characteristics of Poly
(ether ether ketone) Aromatic Polymer Composites", Journal of Theoretical and Applied Fracture
Mechanics, Vol. 14, No. 1, 1990, pp. 49-56.
47. Ouellette, P., Hoa, S.V., and Li, L., "Nondestructive Evaluation of Fiberglass Reinforced Plastic
Road Tankers Subjected to Internal Pressure Using Acoustic Emission Monitoring", Journal of
Hazardous Materials, Vol. 25, 1990, pp. 49-60.
48. Hoa, S.V. and Daoust, J., "An Analytical Solution for Anisotropic Plates Containing Triangular
Holes", Composite Structures, Vol. 19, No. 2, 1991.
49. Mazumdar, S. and Hoa, S.V., "On the Kinematics of Filament Winding on Non-axisymmetric
Cylindrical Mandrels. Part I: A Generalized Model", Composites Manufacturing, Vol. 2, No. 1,
1991.
50. Mazumdar, S. and Hoa, S.V., "On the Kinematics of Filament Winding on Non-axisymmetric
Cylindrical Mandrels. Part II: For Convex Polygonal Cross Section", Composites Manufacturing,
Vol. 2, No. 1, 1991.
51. Beshay, A. and Hoa, S.V., "Improved Interface Bonding between Cellulosic Fibers and
8
November 2013
Suong Van HOA
Curriculum vitae

Thermoplastics", Science and Engineering of Composite Materials, Vol. 2, No. 2, 1992.
52. Hoa, S.V., Lin, S., and Chen, J., "Hygrothermal Effect on Mode II Interlaminar Fracture Toughness
of a Carbon/Polyphenylene Sulfide Laminate", Journal of Reinforced Plastics and Composites, Vol.
11, No. 1, January 1992.
53. Xiao, X.R., Hoa, S.V., and Street, K.N., "Processing and Modeling Resistance Welding of APC-2
Composite", Composite Materials, Vol. 26, No. 7, 1992.
54. Ouellette, P. and Hoa, S.V., "Acoustic Emission Signal Trends during High Cycle Fatigue of
FRP/Balsa Wood Core Vessels", Journal of Acoustic Emission, Vol. 11, No. 2, 1993.
55. Mazumdar, S.K. and Hoa, S.V., "Kinematics of Filament Winding during Starting and Reversal
Process for Complex Composite Components", Transactions of the CSME, Vol. 17, No. 4A, 1993.
56. Han, J. and Hoa, S.V., "A Three Dimensional Multilayer Composite Finite Element for Stress
Analysis of Composite Laminates", International Journal for Numerical Methods in Engineering,
Vol. 36, pp. 3903-3914, 1993.
57. Hojjati, M. and Hoa, S.V., "Curing Simulation of Thick Thermosetting Composites", Composites
Manufacturing, Vol. 5, No. 3, 1994, pp. 159-169.
58. Smith, C. and Hoa, S.V., "Utilization of PVDF Sensors to Determine Impact Damage in
Graphite/Epoxy Plates by Acousto-ultrasonic Technique", Journal of Reinforced Plastics and
Composites, Vol. 13, February 1994.
59. Mazumdar, S.K. and Hoa, S.V., "Algorithm for Filament Winding of Non-axisymmetric Tapered
Composite Components Having Polygonal Cross Section on Two-axes Filament Winding Machine",
Composites Engineering, Vol. 4, No. 3, pp. 343-359, 1994.
60. Mazumdar, S.K. and Hoa S.V. "Analytical Models for Low Cost Manufacturing of Composite
Components by Filament Winding. Part I. Direct Kinematics", Composite Materials, Vol. 29, No.
11, 1995, pp. 1515-1541.
61. Hojjati, M. and Hoa, S.V. "Model Laws for Curing of Thermosetting Composites", Composite
Materials, Vol. 29, No. 13, 1995, pp. 1741-1761.
62. Mazumdar, S.K. and Hoa, S.V., "Analytical Models for Low Cost Manufacturing of Composite
Components by Filament Winding, Part II. Inverse Kinematics", Composite Materials, Vol. 29, No.
13, 1995 pp. 1762-1788.
63. Xie, M., Hoa, S.V. and Xiao, X.R., "Bonding Steel Reinforced Concrete with Composites", Journal
of Reinforced Plastics and Composites, Vol. 14, September 1995, pp. 949-964.
64. Kim, Y.S. and Hoa, S.V., "Buckling of Composite Plate under Biaxial Loading Conditions",
Composite Structures, Vol. 31, No. 4, September 1995, pp. 247-252.
65. Hojjati, M. and Hoa, S.V., "Some Observations in Curing of Thick Thermosetting Laminated
Composites", Science and Engineering of Composite Materials, Vol. 4, No. 2, 1995, pp. 89-108.
66. Xiao, X.R., Lin, S. and Hoa, S.V., "Scale Relations for Mold Filling Simulation in Resin Transfer
Molding", Science and Engineering of Composite Materials, Vol. 4, No. 2, 1995, pp. 131-141.
67. Hoa, S.V., "Creep of a Composite Box Beam", Journal of Reinforced Plastic and Composites, Vol.
14, February 1995, p. 128.
68. Hoa, S.V., "Biaxial Bearing Bypass Testing of Graphite/epoxy Plates", Journal of Composite
Technology and Research, Vol. 17, No. 2, April 1995, pp. 123-131.
69. Mazumdar, S.K. and Hoa, S.V., "Manufacturing of Non-Axisymmetric Thermoplastic Composite
Parts by Tape Winding Technique", Materials and Manufacturing Processes, Vol. 10, No. 1, 1995,
9
November 2013
Suong Van HOA
Curriculum vitae

pp. 47-56.
70. Hojjati, M., Safavi, A.V., and Hoa, S.V., "Design of Domes for Polymeric Composite Pressure
Vessels", Composites Engineering, Vol. 5, No. 1, 1995, pp.51-59.
71. Mazumdar, S.K. and Hoa, S.V., "Application of Taguchi Method for Process Enhancement of Online Consolidation Technique", Composites, Vol. 26, No. 9, 1995, pp. 669-673.
72. Hoa, S.V. and W. Feng, “Application of global/local finite element model to composite laminates”,
Science and Engineering of Composite Materials, Vol. 5, No. 3-4, 1996.
73. Feng, W. and Hoa, S.V., “A partial hybrid degenerated plate/shell element for the analysis of
laminated composites”, International Journal for Numerical Methods in Engineering, Vol. 39, 1996,
pp. 3625-3639.
74. Mazumdar, S.K. and Hoa, S.V., “Determination of manufacturing conditions for hot gas aided
thermoplastic tape winding”, Journal of Thermoplastic Composite Materials, Vol. 9, January 1996,
pp. 35-53.
75. Feng, W., and Hoa, S.V., and Huang Q., “Classification of stress modes in assumed stress fields of
hybrid finite elements”, International Journal for Numerical Methods in Engineering, Vol. 40, 1997,
pp. 4313-4339.
76. Qian, G.L., Hoa, S.V., and Xiao, X.R., “A vibration method for measuring mechanical properties of
composites: Theory and Experiment”, Composite Structures, Vol. 39, No. 1-2, 1997, pp. 31-38.
77. Qian, G.L., Hoa, S.V., and Xiao, X.R., “A new rectangular plate element for composite laminates”,
Trans. ASME Journal of Sound and Acoustics, Vol. 120, January 1998, pp. 80-86.
78. Jarrah, M.A. and Hoa, S.V., “Characteristics between a base laminate and a repair laminate subjected
to variations in pressure in the repair curing cycle”, Journal of Reinforced Plastics and Composites,
Vol. 17, No. 6, 1998.
79. Zhang, C., Hoa, S.V., and Ganesan, R. “Approximate solutions for stresses around a pin-loaded
holes in symmetric composite laminates”, Journal of Reinforced Plastics and Composites, Vol. 17,
No. 9, 1998.
80. Zhang, C., Hoa, S.V., and Ganesan, R., “Edge effects of laminated composite with pin loaded holes”,
AIAA, Vol. 36, No. 10, October 1998, pp. 1883-1893.
81. Wang, Y., Hoa, S.V., and Osman, M., “Cutting behavior of composite prepregs”, Journal of
Reinforced Plastics and Composites, Vol. 17, No. 12, 1998, pp. 1119-1134.
82. Chen, J., Hoa, S.V., Jen, C.K., Viens, M., and Monchalin, J.P., “Ultrasonic evaluation of
graphite/epoxy composites with different curing conditions”, Polymer Composites, Vol. 19, No. 3,
June 1998, pp. 225-232.
83. Feng, W. and Hoa, S.V. “Partial hybrid finite elements for composite laminates”, Finite Elements in
Analysis and Design, Vol. 30, No. 4, October 15, 1998.
84. Chen, J.Y., Hoa, S.V., Jen, C.K. and Wang, H., “Fiber-optic and ultrasonic measurements for in-situ
monitoring of graphite/epoxy composites”, Journal of Composite Materials, Vol. 33, No. 20, 1999.
85. Balike, M., Rakheja, S., and Hoa, S.V., “Study of an energy dissipating under-ride guard for
enhancement of crash worthiness in a car-truck collision”, International Journal of Vehicle Design,
Vol. 22, No. 1/2, 1999, pp. 29-53.
86. Zhao, J., Hoa, S.V., Xiao, X.R., and Hanna, I., “ Partial hybrid finite element analysis of stress fields
in composite laminates with delamination crack under out of plane loading”, Journal of Reinforced
Plastics and Composites, Vol. 18, No. 9, 1999, pp. 827-843.
10
November 2013
Suong Van HOA
Curriculum vitae

87. Naji, M. and Hoa, S.V., “Experimental and theoretical investigation of the curing process of
thermosetting composite structures with angle bend”, Journal of Composite Materials, Vol. 18, No.
8, 1999, pp. 702-723.
88. LeVan, M., Rutinduka, E., Detellier, C., Gougay, P., Hascoet, V., Tavakoliyan, S., Hoa, S.V., and
Matsuura, T., “Mechanical and pore characteristics of zeolite composite membranes”, Journal of
Materials Chemistry, 9, 1999, pp. 783-788.
89. Naji, M. and Hoa, S.V., “Modeling of autoclave curing of composite laminates with angle bend”,
Journal of Reinforced Plastics and Composites, Vol. 18, No. 8, 1999.
90. Balike, M., Rakheja, S. and Hoa, S.V., “Study of an energy dissipating under-ride guard using
hardware-in-the-loop simulation”, Trans. of CSME, Vol. 23, No. 2, 1999, pp. 307-320.
91. Amiouny, S.V. and Hoa, S.V., “Combinatorial optimization for angles of wrap in filament wound
cylinders”, Journal of Reinforced Plastics and Composites, Vol. 18, 1999.
92. Zhang, C., Ganesan, R., and Hoa, S.V., “Effects of friction on three dimensional contact stresses in
pin-loaded composites”, J. Composite Materials, Vol. 34, No. 16, 2000.
93. He, K., Hoa, S.V., and Ganesan, R., “The study of tapered laminated composite structures. A
review”, Composites Science and Technology, 60, (2000) pp. 2643-2657.
94. Hoa, S.V. and Kim, Y.S., “Buckling of composite plates under biaxial loading conditions”, Trans.
of CSME, Vol. 24, No. 1, April 2000.
95. Naji, M. and Hoa, S.V., “Curing of thick angle bend thermoset composite part: Curing process
modification for uniform thickness and uniform fiber volume fraction distribution”, Composite
Materials, Vol. 34, No. 20, 2000, pp. 1710-1755.
96. Kim, K.J., Sham, M.L., Hamada, H., Hoa, S.V + 13 other authors, “Effect of surface treatment on
mode I interlaminar fracture behavior of plain glass woven fabric composites. Part I: Report of the
2nd round robin test results”, Composite Interface, Vol. 7, No. 3, 2000, pp. 227-242.
97. Zhang, C., Hoa, S.V., and Ganesan, R., “Through the thickness compressive strengths of
graphite/epoxy laminated composites: Experimental characterization and statistical analysis”,
Science and Engineering of Composite Materials, Vol. 9, No. 4, 2000, pp. 163-176.
98. Sheng, S.Z. and Hoa, S.V., “Three dimensional micro-mechanical modeling of woven fabric
composites”, Composite Materials, Vol. 35, No. 19, 2001, pp. 1701-1729.
99. Jarrah, M.A., Tahat, M.S.M., and Hoa, S.V., “Mode II fracture at the interface between a base and a
repair graphite/epoxy laminate”, Journal of Reinforced Plastics and Composites, Vol. 21, No. 11,
2002, pp. 963-982.
100. Yan, Y. and Hoa, S.V., “Energy approach for prediction of mechanical behavior of 2-D triaxially
braided composites: Part I: Model Development”, J. Composite Materials, Vol. 36, No. 8, 2002, pp.
963-982.
101. Yan, Y and Hoa, S. V., “Energy approach for prediction of mechanical behavior of 2-D triaxially
braided composites: Part II: Parameter Analysis”, J. Composite Materials, Vol. 36, No. 10, 2002, pp.
1233-1254.
102. Sheng, S.Z. and Hoa, S.V., “Three dimensional micro-mechanical modeling of woven fabric
composites”, Journal of Composite Materials, Vol. 35, No. 19, 2001, pp. 1701-1729.
103. Zhang, C., Hoa, S.V., and Ganesan, R., “Experimental characterization of interlaminar shear
strengths of graphite/epoxy laminated composites”, Journal of Composite Materials, Vol. 36, No. 13,
2002, pp. 1615-1652.
11
November 2013
Suong Van HOA
Curriculum vitae

104. Sheng, S.Z. and Hoa, S.V., “Modeling of 3D angle interlock woven fabric composites”, Journal of
Thermoplastic Composite Materials, Vol. 16, January 2003, pp. 45-58.
105. Hoa, S.V., Sheng, S.Z, Zhao, Q., and Ouellette, P., “Determination of elastic properties of triax
composite materials”, Composite Science and Technology, Vol. 63, 2003, pp. 437-443.
106. Zhao, Q., and Hoa, S.V., “Triaxial woven fabric (TWF) composites with open holes (Part I): Finite
element models for analysis”, Journal of Composite Materials, Vol. 37, No. 9, 2003, pp. 763-790.
107. Zhao, Q., Hoa, S.V., and Ouellette, P., “Triaxial Woven Fabric (TWF) composites with open holes
(Part II): Verification of the finite element models”, Journal of Composite Materials, Vol. 37, No. 10,
2003, pp. 849-874.
108. Zhao, Q. and Hoa, S.V. “Thermal deformation behavior of triaxial woven fabric (TWF) composites
with open holes”, Journal of Composite Materials, Vol. 37, No. 18, 2003, pp. 1629-1640.
109. He, K., Hoa, S.V., and Ganesan, R., “Stress Analysis of Tapered composite laminates using partial
hybrid finite elements”, Journal of Reinforced Plastics and Composites, Vol. 23, No. 6, 2004, pp.
589-600.
110. He, K., Ganesan, R., and Hoa, S.V., “Interlaminar stress and delamination analysis of internally
tapered composite laminates”, Journal of Reinforced Plastics and Composites, Vol. 23, No. 7, 2004,
pp. 707-728.
111. Liu, W., Hoa, S.V., and Pugh, M., “Morphology and performance of epoxy nanocomposites
modified with organoclay and rubber”, Polymer Engineering and Science, 2004, pp. 1178-1186.
112. Hojjati, M., Johnston, A., Hoa, S.V., and Denault, J., “Viscoelastic behavior of Cytec FM73
Adhesive during cure”, Journal of Applied Polymer Science, Volume 91, 2004, pp. 2548-2557.
113. Ton-That, M.T., Ngo, T.D., Ding, P., Fang, G., Cole, K.C., and Hoa, S.V., “Epoxy nanocomposites:
Analysis and Kinetics of cure”, Journal of Polymer Engineering and Science, Vol. 44, No. 6, June
2004, pp. 1132-1141.
114. Zhao, Q., Hoa, S.V., and Ouellette, P., “Progressive failure of triaxial woven fabric (TWF)
composites with open holes”, Composite Structures, Vol. 65, No. 3-4, 2004, pp. 419-431.
115. Zhao, Q., and Hoa, S.V., “ Finite element modeling of a membrane sector of an Art EM Reflector”,
Journal of Composite Materials, Vol. 39, No. 7, pp. 581-600, 2005.
116. Lei, S.G., Ton-That, M.T., Cole, K.C., Hoa S.V., and Pesneau, I., “The role of coupling agents on
the formation of polypropylene nanocomposites”, Canadian Materials Quarterly, Vol. 44, No. 1, pp.
33-40, 2005.
117. Liu, W., Hoa, S.V., and Pugh, M., “Organoclay modified high performance epoxy
nanocomposites”, Composites Science and Technology, 65, 2005, pp. 307-316.
118. Xu, D., Ganesan, R., and Hoa, S.V., “Buckling analysis of triaxial woven fabric composite
structures, part I: Non-linear finite element formulation”, Composite Structures, Vol. 67, 2005, pp.
37-55.
119. Liu, W., Hoa, S.V., and Pugh, M., “Fracture toughness and water uptake of high performance epoxy
nanocomposites”, Invited paper, Composites Science and Technology, Vol. 65 No. 15-16, pp.
2364-2373, 2005.
120. Wu, L., Hoa, S.V., and Ton-That, M.T., “Effects of water on the curing and properties of epoxy
adhesive used for bonding FRP composite sheet to concrete”, Journal of Applied Polymer Science,
Vol. 99, pp. 580-588, 2006.
121. Wu, L., Hoa, S.V., and Ton-That, M.T., “Effects of composition of hardener on the curing and
12
November 2013
Suong Van HOA
Curriculum vitae

aging for an epoxy resin system”, Journal of Applied Polymer Science, Vol. 99, 2006, pp. 580-589.
122. Xu, D., Hoa, S.V., and Ganesan, R., “Buckling analysis of tri-axial fabric composite structures, Part
II: Parametric study- Unidirectional loading”, Composite Structures, Vol. 72, No. 2, pp. 236-253,
2006.
123. Lei, S., Hoa, S.V., and Ton-That, M.T., “Effect of clay types on the formulation and properties of
polypropylene nanocomposites”, Composite Science and Technology, Vol. 66, No. 10, 2006, pp.
1274-1279.
124. Jiang, Y., and Hoa S.V., “A novel method for the manufacturing of thick composites”, Journal of
Composite Materials, Vol. 40, No. 5, pp. 433-454, 2006.
125. Wang, H., Hoa, S.V., and Wood-Adams, P., “A new method to synthesize clay/epoxy
nanocomposites”, Journal of Applied Polymer Science, Vol. 100, No. 6, pp. 4286-4296, 2006.
126. Xu, D., Hoa, S.V., and Ganesan, R., “Buckling analysis of tri-axial woven fabric composite
structures subjected to bi-axial loading”, Composite Structures, Vol. 78, No. 1, Mar. 2007, pp. 140152.
127. Zhao, Q. and Hoa, S.V., “Toughening mechanism of epoxy resins with micro/nano particles”,
Journal of Composite Materials, Vol. 41, No. 2, 2007, pp. 201-220.
128. Lebel, L. and Hoa, S.V., “Manufacturing of braided thermoplastic composites with carbon/nylon
commingled fibers, Journal of Composite Materials, Vol. 41, No. 9, 2007, pp. 1101-1122.
129. Wu, L., Hoa, S.V., and Wang, H., “Improvement of flammability resistance of epoxy adhesives
used in infrastructure applications”, CSCE journal, Vol. 34, No. 3, March 2007, pp. 323-330.
130. Ngo, T.D., Ton That, M.T., Hoa, S.V., and Cole, K.C., “Curing kinetics and mechanical properties
of epoxy nanocomposites based on different organoclays”, Journal of Polymer Engineering and
Science, Vol. 47, No. 5, 2007, pp. 649-661.
131. Liu, W., Hoa, S.V., and Pugh, M., “Water uptake of epoxy-clay nanocomposites: Model
development”, Composites Science and Technology, Vol. 67, pp. 3308-3315, 2007.
132. Zhao, Q. and Hoa, S.V., “Effect of stress shielding or particles-dispersed polymer”, Journal of
Composite Materials, Vol. 41, No. 21, 2007, pp. 2615-2638.
133. Liu, W., Hoa, S.V., and Pugh, M., “Water uptake of epoxy-clay nanocomposites: Experiments and
model validation”, Composites Science and Technology, Vol. 68, pp. 2066-2072, 2008.
134. Allaoui, A., Hoa, S.V., and Pugh, M., “The electronic transport properties and microstructure of
carbon nanofibre/epoxy composites”, Composites Science and Technology, Vol. 68, pp. 410-416,
2008.
135. Xu, Y., and Hoa, S.V., “Mechanical properties of carbon fiber reinforced epoxy/clay
nanocomposites”, Composites Science and Technology, Vol. 68, 2008, pp. 854-861.
136. Ngo, T.D., Ton-That, M.T., Hoa, S.V., and Cole, K.C., “Reinforcing effect of organoclay in rubbery
and glassy epoxy resins- Part I: Dispersion and properties”, Journal of Applied Polymer Science,
Vol. 107, 2008, pp. 1154-1162.
137. Ngo, T.D., Ton-That, M.T., Hoa, S.V., Cole, K.C., “Preparation and properties of epoxy
nanocomposites, I. The effect of premixing on the dispersion of organoclay”, Polymer Engineering
and Science, Vol. 49, 2009, pp, 666-672.
138. Rosca, I.D. and Hoa, S.V., “Highly conductive multiwall carbon nanotube and epoxy composites
produced by three-roll milling”, Carbon, Vol. 47, 2009, 1958-1968.
13
November 2013
Suong Van HOA
Curriculum vitae

139. Nofar, R., Hoa, S.V., and Pugh, M., “Failure detection and monitoring in polymer matrix
composites subjected to static and dynamic loads using carbon nanotube networks”, Composites
Science and Technology, Vol. 69, 2009, pp. 1599-1606.
140. Ngo, T.D., Ton-That, M.T., Hoa, S.V., and Cole, K.C., “Effect of temperature, during and speed of
pre-mixing on the dispersion of clay/epoxy nanocomposites”, Composites Science and Technology,
Vol. 69, 2009, pp. 1831-1840.
141. Hu, S., Hoa, S.V., and Ganesan, R., “A new evaluation method for surface finish of composite
automotive panels using waveform analysis”, Journal of Composite Materials, Vol. 43, No. 8, April
2009, pp. 843-875.
142. Hoa, S.V., Ouellette, P., and Ngo, T.D., “Determination of shrinkage and modulus development of
thermosetting resins”, Journal of Composite Materials, Vol. 43, No. 7, April 2009, pp. 783-803.
143. Allaoui, A, Hoa S.V., Evesque, P., and Bai, J., “Electronic transport in carbon nanotube tangles
under compression: The role of contact resistance”, Scripta Materiala, V.61, N. 6, 2009, p.628-631.
144. Sanchez-Garcia, M.D., Lagaron, J.M. and Hoa, S.V., “Effect of addition of carbon nanofibers and
carbon nanotubes on properties of thermoplastic biopolymers”, Composites Science and Technology,
vol. 70, 2010, p. 1095-1105.
145. Derisi, B., Hoa, S.V., Xu, D., Hojjati, M., and Fews, R.,“ Composite tube exhibiting large
deformation under bending”, Journal of Composite Materials, Vol. 44, No. 16, 2010, pp. 2005-2020.
146. Ngo, T.D., Ton-That, M.T., Hoa, S.V., and Cole, K.C., “The influence of clay dispersion, clay
concentration and epoxy chemistry on the fracture toughness of epoxy nanocomposites”, Science and
Engineering of Composite Materials, Vol. 7, No. 1, 2010, pp.19-30.
147. Ahmed, A.F. and Hoa, S.V., “Optimization and thermal conduction modeling for a hybrid
reinforced composite material for solid rocket motor insulation”, Materials Science and Engineering,
Volume 4, No. 6, June 2010, pp. 13-22.
148. Mehdipour, A., Rosca, I.D., Sebak, A-R, Trueman, C.W., Hoa, S.V., “Advanced carbon fiber
composite materials for RFID tag antenna applications”, Applied Computational Electromagnetic
Society journal, Vol. 25, No. 3, 2010, pp. 218-229.
149. Mehdipour, A., Sebak, A-R., Trueman, C.W., Rosca, I.D., and Hoa, S.V., “Reinforced continuous
carbon fiber composites using multi-wall carbon nanotubes for wideband antenna applications”,
IEEE Trans. on Antenna and Propagation, Vol. 58, No.7, 2010, pp. 2451-2456.
150. Mehdipour, A., Sebak, A-R, Trueman, C.W., Rosca, I.D., and Hoa, S.V., “Full-composite fractal
antenna using carbon nanotubes for multiband wireless applications”, IEEE Antennas and Wireless
Propagation Letters, Vol. 9, 2010, pp. 1-4.
151. Rosca, I.D. and Hoa, S.V., “Method for reducing contact resistivity of carbon nanotube containing
epoxy adhesives for aerospace applications”, Composites Science and Technology, Vol. 71, 2011.
pp. 95-100.
152. Derisi, B., Hoa, S.V., Xu, D., Hojjati, M., and Fews, R., “Mechanical behavior of carbon/PEEK
thermoplastic composite tube under bending load”, Journal of Thermoplastic Composites Materials,
Vol. 24, No. 1, January 2011, pp. 29-49.
153. Zhao, Q., Hoa, S.V., and Gao, Z. J., “Thermal stresses in rings of thermoplastic composites made by
automated fiber placement process”, Journal of Science and Engineering of Composite Materials,
Vol. 18, No. 1 & 2, 2011, pp. 35-49.
14
November 2013
Suong Van HOA
Curriculum vitae

154. Ngo, T.D., Hoa, S.V., Ton-That, M.T., and Wood-Adams, P.M., “Shear mixing and dispersion of
thermoset polymer nanocomposites: Modelling the delamination process”, Journal of Applied
Polymer Science, Vol. 122, No. 1, 2011, pp. 561-572.
155. Mohiuddin, M., Hoa, S.V., “Electrical resistance of CNT-PEEK composites under compression at
different temperatures”, Nanoscale Research Letters, 6(1), 2011, pp.419-424..
156. Shadmehri, F., Derisi, B., and Hoa, S.V., “On bending stiffness of composite tubes”, Journal of
Composite structures, Vol. 93, No. 9, August 2011, pp. 2173-2179.
157. Mehdipour, A., Sebak, A.R., Trueman, C.W., Rosca, I.D., and Hoa, S.V., “Performance of
microstrip patch antenna on a reinforced carbon fiber composite ground plane”, Microwave and
Optical Technology Letters, Vol. 53, No. 6, June 2011, 1328-1331.
158. Ngo, T.D, Ton-That, M.T., Hoa, S.V., and Cole, K.C., “Preparation and properties of epoxy
nanocomposites Part 2: The effect of dispersion and intercalation/exfoliation of organoclay on
mechanical properties”, Polymer Engineering and Science, Vol. 52, Issue 3, 607-614, 2012.
159. Mohiuddin M. and Hoa S.V., “Temperature dependent electrical conductivity of CNT-PEEK
composites”, Composites Science and Technology, 2011, 72 (1), pp. 21-27.
160. Shadmehri, F., Hoa, S.V., and Hojjati, M., “Buckling of conical composite shells”, Composite
Structures, Volume 94, Issue 2, January 2012, pp. 787-792.
161. Zhang, C. and Hoa, S.V., “A limit based approach to the stress analysis of cylindrically orthotropic
composite cylinders (0/90) subjected to pure bending”, Composite Structures, Vol. 94, 2012, pp.
2610-2619.
162. Chaeichian, S., Wood-Adams, P., and Hoa, S.V., “In situ polymerization of polyester-based hybrid
systems for the preparation of clay nanocomposites”, Polymer, Vol. 54, No. 5, 2012, 1512-1523.
163. Ciecierska, E., Boczkowska, A., Kurzydlowski, K.J., Rosca, I.D., and Hoa, S.V., “The effect of
carbon nanotubes on epoxy matrix nanocomposites”, J. Thermal Analysis Calorimetry, published on
line July 3, 2012, DOI 10.1007/10973-012-2506-0.
164. Ahmed, A.F., and Hoa, S.V., “Thermal insulation by heat resistant polymers for solid rocket motor
insulation”, J. Composite Materials, Vol. 46, No. 13, June 2012, pp. 1549-1559.
165. Derisi, B., Hoa S.V., and Hojjati, M., “Similitude study on bending stiffness and behavior of
composite tubes”, Journal of Composite Materials, Vol. 46, No. 21, 2012, pp 2695-2710..
166. Mehdipour, A., Sebak, A.R., Trueman, C.W., Rosca, I.D., and Hoa, S.V., “Multiwall carbon
nanotube-epoxy composites for high shielding effectiveness for aeronautic applications”, IEEE
Transactions on Electromagnetic Compatibility, Vol. 54, No. 1, 2012, pp. 28-36.
167. Aissa B., Tagziria, Haddad E., Jamroz W., Loiseau J., Higgins A., Asgar-Khan M., Hoa S.V., Merle
P.G., Therriault D., and Rosei F., “The self healing capability of carbon fibre composite structures
subjected to hypervelocity impacts simulation space debris”, International Scholarly Research
Network, ISRN Nanomaterials, 2012, Article ID 351205, doi:10.5402/2012/351205
168. Mehdipour A., Denidni T.A., Sebak A., Trueman C.W., Rosca I.D., and Hoa S.V., “Non metallic
dielectric resonator antenna using carbon nanotube composite materials”, IEEE antennas and wireless
propagation letters, Vol. 11,2012, pp. 1293-1295..
169. Ngo T.D., Cole K.C., Ton-That M.T., and Hoa S.V., “Epoxy/clays nanocomposites-Preparation and
performance improvement”, Accepted for publication, SPE Plastics Research Online,
10.2417spepro.004844, May 28, 2013.
15
November 2013
Suong Van HOA
Curriculum vitae

170. Mehdipour Aidin, Denidni Tayeb A., Sebak Abdel R., Trueman Christopher W., Rosca Iosif D., and
Hoa Suong V., ‘Mechanically reconfigurable antennas using an anisotropic carbon-fibre composite
ground”, IET Microw. Antennas Propag., Vol. 7, No. 13, 2013, pp. 1055-1063.
171. Mohiuddin M., and Hoa S.V., “Estimation of contact resistance and its effect on electrical
conductivity of CNT/PEEK composites”, Composites Science and Technology, Vol. 79, 2013, pp. 4248.
172. Naghashpour A., and Hoa S.V., “In situ monitoring of through-thickness strain in glass fiber/epoxy
composite laminates using carbon nanotube sensors”, Composites Science and Technology, Vol. 78,
2013, pp. 41-47..
173. El Tahan, M., Galal, K., and Hoa, S.V., “New Thermoplastic CFRP Bendable Rebars for
Reinforcing Structural Concrete Elements”, Composites, part B: Engineering, Vol. 45, 2013, pp.
1207-1215..
174. Naghashpour A., and Hoa S.V., “Technique for real-time detection, location and quantification of
damages in large polymer composite structures made of electrically non-conductive fibers and carbon
nanotube networks”, Nanotechnology, Vol. 24, 2013 , 445502 (9 pages).
175. Amir Hajiloo, Xie Wenfeng, Hoa Suong V., and Khan Salman, “Thermal control design for
automated fiber placement machine”, Journal of Science and Engineering of Composite Materials,
Vol. 21, No. 3,2013, pp. 427-434.
176. Mactabi Roham, Rosca Iosif D., Hoa Suong V., “Monitoring the integrity of adhesive joints during
fatigue loading using carbon nanotubes”, Composites Science and Technology, 78, (2013), pp. 1-9.
177. Zhang C., Hoa S.V. and P. Liu, “A method to analyze the pure bending of tubes of cylindrically
anisotropic layers with arbitrary angles including 0o and 90o”, Composite Structures, Vol. 109,
2014, pp. 57-67.
178. Zhang C., and Hoa S.V., “A systematic and quantitative method to determine the optimal assumed
stress fields for hybrid stress finite elements”, J of Finite Element Analysis and Design, Vol. 80, 2014, pp.
41-62.
179. Shadmehri, F., Hoa, S.V., and Hojjati, M., “The effect of displacement field on bending,
buckling and vibration of cross-ply circular cylindrical shells”, Mechanics of Advanced Materials
and Structures, 21, 2014, pp. 14-22.
180. Rouhi M., Ghayoor H., Hoa S.V., and Hojjati M., “Effect of structural parameters on design of
variable stiffness composite cylinders made by fiber steering”, accepted for publication,
Composite Structures, August 2014.
181. Naghashpour A. and Hoa S.V., “A technique for real-time monitoring, locating and quantifying
damage in large polymer composite structures made of carbon fibers and carbon nanotube
networks”, accepted for publication, Structural Health Monitoring, July 2014.
182. Helmy S. and Hoa S.V., “Tensile fatigue behavior of tapered glass fiber reinforced epoxy
composites containing nanoclay”, accepted for publication, Composites Science and Technology,
2014.
B. LISTING OF REFEREED CONFERENCE PROCEEDINGS AND PRESENTATIONS
1. McCammond, D. and Hoa, S.V., "Craze and Creep Resistance of High Impact Polystyrene in
Alcohols", Proc. of the National Technical Conference of the Society of Plastics Engineers,
Cleveland, Ohio, 1976, pp. 25-29.
16
November 2013
Suong Van HOA
Curriculum vitae

2. McCammond, D. and Hoa, S.V., "Effects of some Liquids on the Creep Behaviour of High Impact
Polystyrene", Proc. of Annual Technical Conference of the Society of Plastics Engineers, Montreal,
Quebec, 1977, pp. 516-518.
3. Hoa, S.V., "Vibration of Rotating Beam with Tip Mass", Proceedings of the 4th Symposium on
Engineering Applications of Solid Mechanics, Ontario Research Foundations, Toronto, Ontario,
September 25-26, 1978.
4. Hoa, S.V., "Relative Influence of the Mobility and the Solubility Parameters of Fluids on the
Mechanical Behaviour of High Impact Polystyrene", Proceedings of the Annual Technical
Conference of the Society of Plastics Engineers, New Orleans, Louisiana, May 1979, pp. 614-617.
5. Hoa, S.V. and Sankar, S., "Blade Vibration Frequency of Flexible Blade Auto Cooling Fan",
Proceedings of the Fifth World Congress on the Theory of Machines and Mechanisms, Montreal,
July 1979, pp. 1564-1567.
6. Hoa, S.V., "Finite Element Method for the Vibration Frequency of a Curved Beam with Tip Mass",
Proceedings of the Fifth World Congress on the Theory of Machines and Mechanisms, Montreal,
July 1979, pp. 90-93.
7. Ngo, A.D., Hoa, S.V., and Sankar, T.S., "Effect of Environments on the Behaviour of Sheet Molding
Compounds", Proceedings of National Technical Conference, Society of Plastics Engineers, Detroit,
Michigan, November 1979, pp. 75-78.
8. Hoa, S.V., "Stress Concentration in Fiber Reinforced Plastics", Proceedings of the Fifth Symposium
on Engineering Applications of Mechanics, Ottawa, Canada, June 1980, pp. 71-73.
9. Hoa, S.V., "Creep of Fiber Glass Reinforced Plastics in Liquid Environments", Proceedings of the
ASME International Conference on Advances in Materials Technology in the Americas, San
Francisco, August 1980, pp. 63-66.
10. Hoa, S.V. and Masood, Z., "Stress Concentration Factor in a Flexible Blade Auto Cooling Fan",
Proceedings of the ASME International Conference on Reliability Stress Analysis and Failure
Prevention Methods in Mechanical Design, San Francisco, August 1980, pp. 219-223.
11. Hoa, S.V., "Fracture of Sheet Molding Compounds", Proceedings of the 4th Canadian Fracture
Conference, Strength and Fracture of Composites, Alton, Ontario, Canada, October 1980, pp. 106110.
12. Hoa, S.V. and Sankar, T.S., "Fractures of Sheet Molding Compounds", Proceedings of the Fourth
National and the First International Meeting on Composite Materials, Milan, Italy, November 1980.
13. Hoa, S.V., Ngo, A.D., and Sankar, T.S., "Fatigue Crack Propagation of Sheet Molding Compounds
in Various Environments", in Fracture of Composite Materials, ed. G.C. Sih and V.P. Tamuzs,
Martinus Nijhoff Publishers, 1982.
14. Hoa, S.V., "Effect of Hole Size on the Stress Concentration of Sheet Molding Compounds",
Proceedings of the 39th Annual Technical Conference, Society of Plastics Engineers, Boston, May 47, 1981, pp. 43-45
15. McQueen, H.J., Blach, A.E., and Hoa, S.V., "Structure of a Material and Manufacturing Option in
Mechanical Engineering at both B.Eng. and M. Eng. Level", Proceedings of the 1981 ASEE Annual
Conference, Los Angeles, June 1981.
16. Hoa, S.V. and Lin, S., "Temperature Increase in SMC Fatigue Testing", in Composite Structures, ed.
I.H. Marshall, Applied Science Publishers, 1981.
17. Hoa, S.V. and Nguyen, Q.B., "Heat Generation in Fatigue Testing of SMC", Proceedings of the 40th
17
November 2013
Suong Van HOA
Curriculum vitae

Annual Technical Conference, Society of Plastics Engineers, San Francisco, California, May 1982,
pp. 183-185.
18. Hoa, S.V. and Ouellette, P., "Stress Corrosion Cracking of PVDF", Proceedings of the 40th Annual
Technical Conference of Plastics Engineers, San Francisco, California, May 1982, pp. 128-130.
19. Hoa, S.V., Feldman, D., and Khoriaty, E., "Joining Strength of SMC", Proceedings of the National
Technical Conference, Society of Plastics Engineers, Bal Harbour, Florida, October 1982.
20. Goudreau, S., Gauvin, R., and Hoa, S.V., "Prédiction par diverses méthodes d'analyse de la
performance d'un carter en composite", Association pour les matériaux composites, Paris, France,
September 1982, pp. 235-245.
21. Hoa, S.V., "Stress Analysis of Dual Laminate Cylindrical Fiber Glass Reinforced Plastic Vessel",
Proceedings of the 37th Annual Conference, Reinforced Plastics/Composites Institute, The Society
of the Plastics Industry, Inc. Washington, D.C., January 1982, Section 3B.
22. Hoa, S.V., "Strain Limited Design in Reinforced Plastic Pressure Vessel", Proceedings of the Fourth
International Conference on Composite Materials, ICCM-IV, Japan, October 1982.
23. Feldman, D., Hoa, S.V. and Khoriaty, E., "Joining Strength of Sheet Molding Compounds SMCR65", Proceedings of the 38th Annual Technical Conference, The Society of the Plastics Industry,
Houston, Texas, February 1983.
24. Hoa, S.V., Sankar, T.S., and Bargiora, R., "Bending Behaviour of Glass Fiber Reinforced Polyester
Laminates", Proceedings of the 38th Annual Technical Conference, The Society of the Plastics
Industry, Houston, Texas, February 1983.
25. Hoa, S.V., Ouellette, P., and Sankar, T.S., "Strain Analysis in Fiber Reinforced Plastic Vessel",
Proceedings of the 1983 Portland ASME Pressure Vessel and Piping Division Conference, Portland,
Oregon, June 1983, paper #83-PVP-43.
26. Lucking, W.M., Hoa, S.V., and Sankar, T.S., "Stress Analysis of Laminates Containing Circular
Holes", Proceedings of the Department of National Defense Composite Materials Workshop,
Victoria, British Columbia, July 12-25, 1983, pp. 15.1-15.27.
27. Hoa, S.V., Sankar, T.S., and Ouellette, P., "Fatigue of Laminates Used in FRP Vessels", Proceedings
of the Composite Materials Symposium, Sheridan Park, Toronto, Ontario, October 1983.
28. Hoa, S.V. and Ouellette, P., "Damping of Composite Materials", Proceedings of the 1983
Composites Symposium, The Industrial Materials Research Institute, Boucherville, Quebec,
November 1983.
29. Ngo, A.D., Hoa, S.V., and Sankar, T.S., "Fatigue of Sheet Molding Compounds in Liquids
Environments", Proceedings of the ASTM Symposium, 'High Modulus Fiber Composites in Ground
Transportation and High Volume Applications,' Pittsburg, Penn., November 1983.
30. Hoa, S.V., Cheng, R.M.H., and Badruddin, S., "An Improved Profile of the Railway Wheel to
Minimize Residual Stresses After Severe Drag Braking", Proceedings of the ASME 1983 Winter
Annual Meeting, Boston, Mass, November 1983, paper #83-WA-RT-11.
31. Hoa, S.V., Berczynski, W.S. and Sankar, T.S., "Fiber Reinforced Plastic Vessels under External
Pressure", Proceedings of the 39th Annual Conference, Reinforced Plastic Institute, The Society of
the Plastics Industry, Houston, Texas, January 1984.
32. Ngo, A.D., Hoa, S.V., and Sankar, T.S., "Axial Fatigue of SMC-R65 Sheet Molding Compound in
Liquid Environments", Proceedings of the CFC 12 Fatigue Process in Fiber Composite Conference,
Jackson Point, Ontario, May 3 and 4, 1984, pp. 56-61.
18
November 2013
Suong Van HOA
Curriculum vitae

33. Ouellette, P. and Hoa, S.V., "Fatigue of Laminate Used in FRP Vessels", Proceedings of the 42nd
Annual Technical Conference of the Society of Plastics Engineers, New Orleans, Louisiana, May
1984.
34. Ouellette, P. and Hoa, S.V., "Creep of Laminates Used in FRP Vessels", Proceedings of the 43rd
Annual Technical Conference of the Society of Plastics Engineers, Washington, D.C., April 29-May
3, 1985.
35. Rohrauer, G., Hoa, S.V., and Feldman, D., "Modification of Damping Coefficients of
Graphite/Epoxy Composite by Adding Rubber into Epoxy", Proceedings of the 5th Int. Conference
on Composite Materials, San Diego, California, July-August 1985.
36. Hoa, S.V., "The Use of Laminate Theory in Fiber Reinforced Plastic Pressure Vessels", Proceedings
of the 1985 Corrosion Resistance Conference, St. Louis, Missouri, October 14-17, 1985
37. Hoa, S.V., Lulham, I., and Sankar, T.S., "Aluminum Inserts for Fastening Sheet Molding
Compounds", Proceedings of the 3rd International Conference on Composite Structures, Paisley
College of Technology, Scotland, September 9-11, 1985.
38. Ouellette, P., Hoa, S.V., and Sankar, T.S., "Buckling of Filament Wound Composite Tubes Under
External Pressure Loadings", Proceedings of "Composites '85" Symposium, National Research
Council Canada, Industrial Materials Research Institute, November 1985.
39. Ouellette, P., Hoa, S.V. and Sankar, T.S., "Buckling of Fiber Reinforced Plastic Vessels under
External Pressure", Conference on Experimental Mechanics, Beijing, China, October 8, 1985.
40. Hoa, S.V., McQueen, H.J., and Doan, D., "Review of the Fatigue Behavior of Graphite/Epoxy
Composites", Proceedings of the 17th International Conference on the Strength of Metals and Alloys,
Montreal, Canada, August 12-16, 1985, pp. 1531-1536.
41. Ouellette, P., Hoa, S.V., and Sankar, T.S., "Buckling of Filament Wound Reinforced Plastic Vessels
under External Pressure", Proceedings of the 41st Annual Conference, The Society of Plastics
Industry, RP/C, Atlanta, January 1986, Paper 22-F.
42. Ouellette, P. and Hoa, S.V., "Acoustic Emission Testing of Reinforced Plastic Balsa-Core Laminates
Used in Road Tankers", Proceedings of the 2nd International Symposium on Acoustic Emission
from Reinforced Composites, Montreal, Canada, July 21-25, 1986.
43. Lucking, W.M., Hoa, S.V., and Sankar, T.S., "On Measuring Hole Surface Strains of
Graphite/Epoxy Laminar Plates Using Strain Gages", Proceedings of Society for Experimental
Mechanics, New Orleans, June 8-13, 1986, pp. 499-507.
44. Huang, Q., Hoa, S.V., and Sankar, T.S., "A New Finite Element Technique for Analysis of Coupling
Stresses in Composite Materials", Proceedings of the International Conference on Computational
Engineering Mechanics, Beijing, China, July 1987.
45. Hoa, S.V., "Analysis for Design with Fiber Reinforced Plastic Vessels", Proceedings of the 42nd
Annual Technical Conference, Society of the Plastics Industry, Cincinnati, February 1987.
46. Blach, A.E. and Hoa, S.V., "The Effect of Pull-Back on Stresses on FRP Flanges", 1987 Spring
Conference on Experimental Machines, Society for Experimental Machines, Houston, Texas, June
14-19, 1987.
47. Blach, A.E. and Hoa, S.V. "Bolted Flanged Connections for Glass Fiber Reinforced Plastic Pipes and
Pressure Vessels", 11th International Conference on Fluid Sealing, Cannes, France, April 8-10, 1987.
48. Hoa, S.V. and Di Maria, A., "Aluminum Inserts for Fastening Sheet Molding Compounds",
Proceedings of the Conference on Composites in Manufacturing, Society of Manufacturing
19
November 2013
Suong Van HOA
Curriculum vitae

Engineers, Los Angeles, December 1987.
49. Hoa, S.V., Lin, S., and Chen, J., "Mechanical Behaviour of Thermoplastic Composites", Proceedings
of the ASTM Symposium on Thermoplastic Matrix Composites, Materials, Bal Harbor, Florida,
October 19-20, 1987.
50. Hoa, S.V., Daoust, J., Du, B.L., and Vu-Khanh, T., "Interlaminar Stresses in a Tapered Laminate",
Proceedings of "Composites '87" Conference, Industrial Materials Research Institute, Montreal,
Canada, Nov. 5-6, 1987.
51. Lucking, W.M., Hoa, S.V., and Sankar, T.S., "Edge Phenomena of Fiber Reinforced Laminated
Plates", Proceedings of the International Conference on Analytical and Testing Methodologies for
Design with Advanced Materials, Montreal, Canada, August 26-28, 1987.
52. Hoa, S.V., Rohrauer, G., and Dudley, N., "Environmental Degradation of Filament Wound
Reinforced Plastic Pipes", Proceedings of the 43rd Annual Technical Conference, Society of the
Plastics Industry, Cincinnati, Ohio, February 1-5, 1988.
53. Daoust, J. and Hoa, S.V., "Parameters Effecting Interlaminar Stresses in Tapered Laminates",
Proceedings of the Composites '88’ Conference, Industrial Materials Research Institute, National
Research Council Canada, Quebec, November 1988.
54. Hoa, S.V., Journeaux, B., and Di Lalla, L., "Computer Aided Design for Composites", Proceedings
of the Composites '88" Conference, Industrial Materials Research Institute, National Research
Council Canada, Quebec, November 1988.
55. Hoa, S.V. and Di Maria, A., "Effective Joining of Sheet Moulding Composites", Proceedings of the
4th Annual ASM/ESD Advanced Composites Conference/Exposition, Dearborn, Michigan,
September 1988.
56. Xiao, X.R. and Hoa, S.V., "Effect of Melting History on the Crystalline Characteristics of Poly
(etherether Ketone) Aromatic Polymer Composite", Proceedings of the 2nd International Conference
on Development and Design with Advanced Materials, Montreal, Quebec, August 1989.
57. Huang, Q., Hoa, S.V., and Sankar, T.S., "Three-Dimensional Hybrid Finite Element for Laminated
Structures", Proceedings of the 2nd International Conference on Design and Development with
Advanced Materials, ATMAM '89, Montreal, Canada, August 16-18, 1989.
58. Ouellette, P., Hoa, S.V., and Li, L., "A Procedure for Acceptance Testing of FRP Balsa Wood Core
Pressure Vessels", Proceedings of the 3rd International Symposium on Acoustic Emission from
Composite Materials, AECM-3, Paris, France, July 17-21, 1989.
59. Hoa, S.V. and Smith, C., "AE Signal Classification of Graphite/PPS Composite Subjected to Mode
II Fracture", Proceedings of the 3rd International Symposium on Acoustic Emission from Composite
Materials, AECM-3, Paris, France, July 17-21, 1989.
60. Beshay, A. and Hoa, S.V., "Reinforcement of Polyvinylchloride (PVC) and Polystyrene (PS) with
Cellulosic Fibers Treated with Silane", Proceedings of the Interfacial Phenomena in Composite
Materials Conference, University of Sheffield, Sheffield, UK, September 5-7, 1989.
61. Hoa, S.V. and Thimmhardy, E., "An Investigation into the Use of Fiber Reinforced Plastics in Load
Bearing Members of Buildings", Proceedings of the 1989 Canadian Society for Civil Engineering 9th
Canadian Hydro-technical Conference, Memorial University, St. John's, Newfoundland, June 8-10,
1989.
62. Hoa, S.V., Journeaux, B. and Di Lalla, L., "Computer Aided Design for Composite Structures",
Proceedings of the 7th International Conference on Composite Materials, Quangchou, China, August
20
November 2013
Suong Van HOA
Curriculum vitae

1-3, 1989.
63. Hoa, S.V., "Stresses at Connections in Fiber Reinforced Plastic Vessels", Proceedings of the 44th
Annual Technical Conference, SPI Composite Institute, Dallas, Texas, February 1989.
64. Hoa, S.V. and Nouraeyan, A, "Mechanical Behaviour of Fiber Reinforced Plastic Horizontal Pipes
on Saddle Support", ibid.
65. Hoa, S.V., "Stress Analysis of Fiber Reinforced Plastic Horizontal Pipes on Saddle Support",
Proceedings of the Corrosion Conference, National Association of Corrosion Engineers, San
Antonio, Texas, November 1989.
66. Xiao, X. and Hoa, S.V., "Parameters Affecting the Repair Process of Thermoplastic Composites",
Proceedings of the 2nd International Conference on Design and Development with Advanced
Materials, ATMAM '89, Montreal, Canada, August 16-18, 1989.
67. Dudley, N. and Hoa, S.V., "Mechanical Behavior of Composite Fibers after Exposure to Corrosive
Environments", Proceedings of the 45th Annual Conference, SPI Composites Institute, Washington
D.C., Paper 2E, Feb. 1990.
68. Hoa, S.V., Ouellette, P., and Li, L., "An Acoustic Emission Procedure for Nondestructive Evaluation
of Road Tankers", Proceedings of the 1990 Spring Conference, the American Society for
Nondestructive Testing, San Antonio, Texas, March 19-23, 1990.
69. Huang, Q., Hoa, S.V., and Sankar, T.S., "Three Dimensional Composite Finite Element Formulation
for Stress Analysis of Anisotropic Laminate Structures", in Composite Materials, Design and
Analysis, ed. W.P. de Wilde and W.R. Blain, Computational Mechanics Publications, --- Springer Verlag, Proceedings of the 2nd International Conference on Computer Aided Design in Composite
Material Technology, Brussels, Belgium, April 25-27, 1990.
70. Xiao, X.R., Hoa, S.V., and Street, K.N., "Repair of Thermoplastic Composite Structures by Fusion
Bonding", Proceedings of the 35th International SAMPE Symposium and Exhibition, Anaheim,
California, April 2-5, 1990, pp. 37-45,
71. Beshay, A. and Hoa, S.V., "Improved Interface Bonding between Cellulosic Fibers and
Thermoplastic", Proceedings of the 35th International SAMPE Symposium and Exhibition,
Anaheim, California, April 2-5, 1990, pp. 571-578.
72. Ouellette, P., Hoa, S.V., and Li, L., "Nondestructive Evaluation of Fiberglass Reinforced Plastic
Road Tankers Subjected to Internal Pressure Using Acoustic Emission Monitoring", Proceedings of
the 2nd International Specialist Meeting on Major Hazards in the Transport and Storage of Pressure
Liquified Gases, Queen's University, Kingston, Ontario, May 27-30, 1990.
73. Thimmhardy, E. and Hoa, S.V., "Ultimate Strength of Box Section Composite Material Beams",
Proceedings of the Canadian Society for Civil Engineering Annual Conference, Hamilton, Canada,
June 1990.
74. Xiao, X.R., Hoa, S.V., and Street, K.N., "On the Durability and Morphology Relationship in
Crystalline Thermoplastic Composites", Proceedings of the International Colloquium on Durability
of Polymer Based Composite Systems for Structural Applications, Free University of Brussels,
Brussels, Belgium, August 1990.
75. Hoa, S.V., "A Recommended Practice for Acoustic Emission Monitoring of Fiber Reinforced Plastic
Highway Tankers", Proceedings of the American Society for Nondestructive Testing Conference,
San Antonio, March 1990.
76. Hoa, S.V., "Fiber Reinforced Plastic Vessels on Saddle Support", Proceedings of the 10th
21
November 2013
Suong Van HOA
Curriculum vitae

Symposium on Managing Corrosion with Plastic, NACE, Houston, Texas, March 1990.
77. Thimmhardy, E. and Hoa, S.V., "Numerical Investigation of Ultimate Strength of Composite Box
Beams", Advanced Composites Materials in Civil Engineering Structures, Proceedings of the
Specialty Conference, American Society of Civil Engineers, Las Vegas, Nevada, Jan. 31 & Feb. 1,
1991.
78. Xiao, X.R., Hoa, S.V., and Street, K.N., "Induction Heating Repair of Carbon Fiber Reinforced
Composite Laminates", Proceedings of the 2nd Japan International SAMPE Symposium and
Exhibition, Chiba, Japan, Dec. 11-14, 1991.
79. Xiao, X.R., Hoa, S.V., and Street, K.N., "Fusion Bonding Repair of Thermoplastic Resin
Composites", Proceedings of the 8th International Conference of Composite Materials, Hawaii, July
15-19, 1991.
80. Hoa, S.V., Lin, S., and Chen, J., "Hygrothermal Effect on Mode II Interlaminar Toughness of a
Carbon/Polyphenylene Sulfide Laminate", Proceedings of the 8th International Conference on
Composite Materials, Hawaii, July 15-19, 1991.
81. Ngo, A.D., Hoa, S.V., and Sankar, T.S., "Micromechanic Analysis of Random Fiber Sheet Molding
Compounds", Proceedings of the 1st Canadian International Conference and Exhibition on
Composites, Montreal, Canada, Sept. 4-6, 1991.
82. Huang, Q., Chien, W.Z., and Hoa, S.V., "A New Formulation of Hybrid-displacement Finite
Element with Assumed Partial Stress Field and Partial Strain Field", Proceedings of the 1st Canadian
International Conference and Exhibition on Composites, Montreal, Canada, Sept. 4-6, 1991.
83. Xiao, X.R., Hoa, S.V., and Street, K.N., "Evaluation of Fusion Bonding Patched Thermoplastic
Composite Panels", Proceedings of the 1st Canadian International Conference and Exhibition on
Composites, Montreal, Canada, Sept. 4-6, 1991.
84. Hoa, S.V., "Computer Aided Design for Composite Pressure Vessels and Piping", Proceedings of the
11th Biennial Managing Corrosion with Plastics Symposium, NACE, Houston, Texas, October 2124, 1991.
85. Hoa, S.V., "Creep of a Composite Box Beam", Proceedings of the 47th Annual Composites Institute
Conference, Cincinnati, Ohio, Feb. 1992.
86. Han J. and S.V. Hoa “Three dimensional composite elements for finite element analysis of
anisotropic laminated structures”, Proc. Computer Aided Design in Composite Material Technology
III, Delaware, USA, May 1992.
87. Mazumdar, S.K. and Hoa, S.V., "Reverse Kinematics Filament Winding", Proceedings of the CSME
Forum, Montreal, June 1992.
88. Mazumdar, S.K. and Hoa, S.V., "Filament Winding of Tapered Axisymmetric and Nonaxisymmetric Composite Components", Advanced Materials and Structures from Research to
Applications, Proceedings of the 13th International European Chapter of SAMPE, Hamburg,
Germany, May 1992.
89. Smith, C. and Hoa, S.V., "Utilization of PVDF Sensors to Determine Impact Damage in
Graphite/Epoxy Plates by Acousto-ultrasonic Techniques", Proceedings of the 4th International
Symposium on Acoustic Emission from Composites, Seattle, USA, July 1992.
90. Ouellette, P. and Hoa, S.V., "AE Signal Trends during Long Cycle Fatigue of FRP/Balsa Wood Core
Vessels", Proceedings of the 4th International Symposium on Acoustic Emission from Composites,
Seattle, USA, July 1992.
22
November 2013
Suong Van HOA
Curriculum vitae

91. Mazumdar, S.K. and Hoa, S.V., "Determination of Fiber Winding Angle Distribution during
Filament Winding Process for Known Winding Motions", Proceedings of the 2nd International
Symposium of Composite Materials and Structures, Beijing, China, August 1992.
92. Hoa, S.V., Huang, Q. and Feng, W., "Dual Finite Elements with Partial Stress and Strain Fields",
Proceedings of the 2nd International Symposium of Composite Materials and Structures, Beijing,
China, August 1992.
93. Kim, Y.S. and Hoa, S.V., "Biaxial Buckling of Composite Rectangular Plates", Proceedings of the
2nd International Symposium of Composite Materials and Structures, Beijing, China, August 1992.
94. Hoa, S.V., "Design of a Composite Box Beam for Building Applications", Proceedings of the
International Conference on Advanced Composite Materials in Bridges and Structures, Canadian
Society for Civil Engineering, Sherbrooke, Canada, October 1992.
95. Mazumdar, S.K. and Hoa, S.V., "Experimental Determination of Process Parameters for Laser
Assisted Processing of PEEK/Carbon Thermoplastic Composites", 38th International SAMPE
Symposium and Exhibition, Anaheim, California, May 1993.
96. Hoa, S.V., "Bolted Joint Strength of Graphite/Epoxy Laminates Subject to Biaxial Loading
Conditions", Advanced Technology on Design and Fabrication of Composite Materials and
Structures, Politecnico di Torino, Torino, Italy, May 1993.
97. Kim, Y.S. and Hoa, S.V., "Effects of Load Combination on Biaxial Buckling of Laminated
Composite Rectangular Plates", Proceedings of ICCM-9, Madrid, Spain, July 1993.
98. Mazumdar, S.K. and Hoa, S.V., "Effect of Processing by Hot Gas and Laser Heating on Properties of
APC-2 (PEEK/Carbon) Composite Rings", Proceedings of ICCM-9, Madrid, Spain, July 93.
99. Hoa, S.V., Lucking, W.M., and Lefebvre, D., "Biaxial Testing of Bolted Graphite/Epoxy Plates",
Proceedings of the 9th International Conference on Composites, ICCM-9, Madrid, Spain, July 1993.
100. Han, J. and Hoa, S.V., "Three Dimensional Stress Analysis by a Laminated Element with Partial
Stress Field for Composite Laminates", Proceedings of CANCOM 1993, Ottawa, Canada, Sept.
1993.
101. Kim, Y.S. and Hoa, S.V., "Buckling of Composite Plates under Biaxial Loading Conditions",
Proceedings of CANCOM '93, Ottawa, Canada, Sept. 1993.
102. Mazumdar, S.K. and Hoa, S.V., "Manufacture of Complex Thermoplastic Composite Components
on Tape Winding Machine Using Laser Heating", Proceedings of the 2nd Canadian International
Conference on Composites, CANCOM '93, Ottawa, Canada, September 1993.
103. Hoa, S.V., "Bolted Joint Strength of Composite Laminates under Biaxial Loading Conditions",
ASTM Symposium on Joining of Composites, Dallas, November 1993.
104. Invited lecture, Hoa, S.V., "Effect of Biaxial Loading on Bearing/Bypass Joint Strength of
Composites", US Army Symposium, New Orleans, August 1993.
105. Mazumdar, S.K. and Hoa, S.V., "Fabrication of APC-2 Rings Using Laser", Proceedings of the
1993 Japan SAMPE Conference, Chiba, Japan, 1993.
106. Mazumdar, S.K. and Hoa, S.V., "Use of Taguchi Method for the Manufacture of APC-2 Rings
Using Laser", Proceedings of the 1994 SAMPE Conference, Anaheim, April 1994.
107. Invited presentation: Hoa, S.V., “Biaxial Bearing Bypass Bolted Joint Strength of Composite
Laminates”, Ecole Polytechnique, June 1994.
108. Invited presentation: Hoa, S.V., “Biaxial Bearing Bypass Bolted Joint Strength of Composite
Laminates”, Clarkson University, New York, 1994.
23
November 2013
Suong Van HOA
Curriculum vitae

109. Feng, W. and Hoa, S.V., "3-D Transition Element Formulation for the Global/local Analysis of
Laminated Structures", Proc. of the International Conference on Design and Manufacturing Using
Composites, Montreal, Quebec, Canada, August 1994, pp. 394-403.
110. Kim, Y.S. and Hoa, S.V., "Effects of Stacking Sequence on the Biaxial Buckling of Laminated
Composite Plates", Proceedings of the International conference on Design and Manufacturing Using
Composites, Montreal, August 1994, pp. 365-374.
111. Hojjati, M. and Hoa, S.V., "Consolidation of Thick Thermosetting Composites", ibid., pp. 311319.
112. Xiao, X.R., Lin, S., and Hoa, S.V., "Scale Relations in Mold Filling in Resin Transfer Molding",
ibid., pp. 53-62.
113. Feng, W. and Hoa, S.V., "A Degenerated Plate/shell Element with Assumed Partial Stress Field for
the Analysis of Laminated Composites", Computer Aided Design in Composite Material Technology
IV, Computational Mechanics Publications, 1994, pp. 75-84.
114. Han, J. and Hoa, S.V., "An 8 Node Multilayer Partial Stress Field Finite Element for 3-D Analysis
of Composite Structures", ibid, pp. 51-58.
115. Xiao, X.R., Di Santo C., Xie, M. and Hoa, S.V., “Experimental Verification of Scale Relations in
Mold Filling Simulation in Resin Transfer Molding”, 26th International SAMPE Technical
Conference, Atlanta, October 1994, pp.171-183.
116. Xie, M., Hoa, S.V. and Xiao, X.R., "Bonding Steel Reinforced Concrete with Composites", ibid,
pp. 675-688.
117. Mazumdar, S.K. and Hoa, S.V., “Automated Manufacturing of Composite Component by
Thermoplastic Tape Winding”, 8th CASI Symposium on Aerospace Structures and Materials,
Montreal, May 1995.
118. Qian, G.L., Hoa, S.V., and Xiao, X.R., "Identification of Elastic and Damping Properties of
Composite Laminates from Vibration Test Data", ICCM-10, Whistler, British Columbia, August 1418, 1995, p. IV-25-32.
119. Qian, G.L., Hoa, S.V., and Xiao, X.R., "Vibration and Damping Analysis of Laminated
Composites by Using a New Rectangular Plate Finite Element", ibid., pp. V-217-224.
120. Hoa, S.V. and Feng, W., "A Global/local Model for Analysis of Composites", ibid. pp. V-141-148.
121. Erzingatzian, A., Hoa, S.V. and Xiao, X.R., "Finite Element Analysis of Filament Wound Pipes on
Saddle Support", Proceedings of the International Conference on Composite Materials and Energy,
Montreal, May 1995.
122. Ganesan, R. and Hoa, S.V., "Modeling and Analysis of Uncertainty in Acoustic Emission of
Composite Materials", 5th International Symposium on Acoustic Emission from Composite
Materials, Sundsval, Sweden, July 1995.
123. Qian, G.L., Hoa, S.V., and Xiao, X.R., "A New Rectangular Plate Element for Vibration Analysis
of Laminated Composites", Proceedings of the 15th Canadian Congress of Applied Mechanics,
Victoria, British Columbia, May-June 1995, p. 280.
124. Ganesan, R. and Hoa, S.V., "Stochastic Finite Element Analysis of Composite Structures", ibid., p.
92.
125. Balike M., Rakheja S., and S.V. Hoa, “Crashworthiness enhancement in a car truck collision using
energy dissipative under-ride guard”, paper 962211, SAE International Truck and Bus meeting &
Exposition, Detroit, Michigan, October 1996.
24
November 2013
Suong Van HOA
Curriculum vitae

126. Hoa S.V. and W. Feng, “Application of global/local finite element model to composite laminates
with a hole”, Proc. Canada-Japan workshop on Composites, Aug. 1996.
127. Ngo A.D., Martin L., and S.V. Hoa, “Mode III interlaminar fracture toughness of unidirectional
graphite/epoxy composites”, ibid.
128. Invited lecture: Hoa S.V. and W. Feng, “Hybrid finite element method for stress analysis of
composite laminates”, Proc. of Composite 96, Industrial Materials Institute, National Research
Council of Canada, Oct. 1996.
129. Chen J.Y., Hoa S.V., Jen C.K., Levesque D. and J.P. Monchalin, “ Ultrasonic evaluation of
graphite/epoxy composites with different curing conditions”, ibid.
130. Chen J.Y., Hoa S.V., Jen C.K., Levesque D., and J.P. Monchalin, “The studies of dynamic
mechanical properties of AS4/3501-6 composites with different curing conditions”, 3rd International
conference on Composites Engineering, New Orleans, 1996.
131. Ganesan R., Hoa S.V. and M. El-Karlamawy, “Stochastic analysis of the fatigue behavior of
polymer matrix fiber reinforced laminated composites”, Proc. International conference on Advanced
Materials, Beijing, China, Aug. 1996.
132. Feng W. and S.V. Hoa, “A 3-D partial hybrid laminated element for analysis of thick laminates”, 3rd
International conference on Composites Engineering, New Orleans, July 1996.
133. Zhao J., Hoa S.V. and X.R. Xiao, “A knowledge embedded data base system for composite material
selection”, Proc. Computer aided Design in Composite Materials Technology V, Udine, Italy, June
1996.
134. Hoa S.V., and W. Feng, “Global/local approach using hybrid elements for composites” ibid.
135. Hoa S.V., Xiao X.R., and M. Xie, “Repair of steel reinforced concrete with carbon/epoxy
composites”, 2nd International conference on Advanced Composite Materials in Bridges and
Structures, Montreal, August 1996.
136. Erzingatzian A., Hoa S.V., and X.R. Xiao, “Mechanical behavior of filament wound FRP pipes on
saddle support”, Proc. ICPVT-8, ASME, Montreal, June 1996, pp. 307-314.
137. Nakai A., Hamada, H., and Hoa, S.V., “Influence of braiding structure on torsional properties of
braided composite tube”, Proc. 1996 Pressure Vessels and Piping conference, Montreal, June 1996.
138. Jen C.K., Chen J.Y., Hoa S.V., Nguyen K.T., Legoux J.G., and H. Hebert, “Clad buffer rods for insitu process monitoring”, Proceedings of the IEEE International Symposium, Toronto, October 5-8,
1997.
139. Keynote address: Hoa S.V., “Fiber reinforced plastic highway tankers”, International conference
on research on Materials, Cancun, Mexico, September 1997.
140. Chen J.Y., Hoa S.V., Jen C.K. and H. Wang, “In-situ monitoring of graphite/epoxy cure using fiber
optics and ultrasonic sensors”, Proc. of the 12th Annual Technical conference on Composite
Materials, American Society for Composites, Dearborn, Michigan, Oct. 6-8, 1997.
141. El-Karmalawy M., Ganesan R., and S.V. Hoa, “Quantification and prediction of fatigue damage in
composite laminates based on modal testing and stochastic cumulative damage model”, ibid.
142. Kwan, E., Xiao, X.R., Hoa, S.V., Hamada, H., and Wang, H., “Low velocity impact of multi
reciprocal braided E glass/epoxy composites”, ibid.
143. Ganesan, R., Hoa, S.V., Zhang, S., and El-Karlamawy, M., “A stochastic cumulative model for the
fatigue response of laminated composites”, Proc. 11th International conference on Composites,
ICCM 11, Gold Coast, Australia, July 1997.
25
November 2013
Suong Van HOA
Curriculum vitae

144. Chen, J.Y., Hoa, S.V., Jen, C.K., and Wang, H., “Monitoring and evaluation of curing of
graphite/epoxy composite using fiber optics and ultrasonics”, Proceedings of the CanSmart
workshop on Smart Materials and Structures, Canadian Space Agency, September 1998.
145. Feng, W. and Hoa, S.V., “3-D global/local model using partial hybrid finite elements and its
software COMSA for composite analysis”, Proc. CADCOM 98, Composite Methods on Composite
Materials, Montreal, August 1998.
146. Amiouny, S.V. and Hoa, S. V.,“ Heuristics for the design of thick composite cylinders”, ibid.
147. Zhao, J., Hoa, S.V., Xiao, X.R., and Hanna, I., “Partial hybrid finite element analysis of stress
fields in composite laminates with delamination crack under out of plane loading”, ibid.
148. Naji, M. and Hoa, S.V., “Curing of thick angle-bend thermoset composite Part: Curing cycle effect
on thickness and fiber volume fraction distribution”, Proc. 2nd Joint Canada-Japan workshop on
Composites, Montreal, August 1998.
149. Zhang, C., Hoa, S.V., and Ganesan, R., “Stochastic characteristics of in-situ interlaminar shear
strengths”, ibid.
150. Invited presentation: Hoa, S.V. “Hybrid finite element method for stress analysis of composite
laminates”, Journée des éléments finis, Université Laval, Quebec, May 1998.
151. Invited presentation: Hoa, S.V., “Development of composite picket for log trailers”, Canadian
Woodlands conference, Montreal, March 1998.
152. Invited lecture: Hoa, S.V., “Bolted joint strength of composite laminates under biaxial bearing
bypass loading conditions” International conference on mechanical testing of materials and
structures, Hong Kong University of Science and Technology, October 22-24, 1998.
153. Yong, Y. and Hoa, S.V., “An energy approach for the prediction of effective stiffness of 2-D
braided composites”, Proc. International Conference of Composite Materials, ICCM 12, Paris, July
1999.
154. Hoa, S.V. and Lee, S., “Development of techniques for the joining of composite tubes”, ibid.
155. Naji, M. and Hoa, S.V., “Curing of thick angle-bend thermoset composite part: curing process
modification for uniform thickness and uniform fiber volume fraction distribution”, ibid.
156. Zhang, C., Ganesan, R., and Hoa, S.V., “Experimental characterization and stochastic modeling of
graphite/epoxy laminated composites”, ibid.
157. Zhang, C., Ganesan, R., and Hoa, S.V., “Analytical solutions to three-dimensional edge stresses in
laminated composites with circular holes”, Proceedings of the Canadian Congress of Applied
Mechanics, 1999.
158. Amiouny, S. and Hoa, S.V., “Angles of wrap in filament wound cylinders”, Proceedings of the
meeting of the Institute for Operations Research and the Management Sciences (INFORMS),
Cincinnati Spring meeting, May 2-5, 1999.
159. Al Omari A.O., Xiao, X.R., and Hoa, S.V., “An investigation on the vacuum assisted resin transfer
molding process”, Proc. Polymer Composites 99 Symposium, Society of Plastics Engineers, Lac
Delage, Quebec, Canada, October 1999.
160. Hojjati, M. and Hoa, S.V., “Mold release agent effect on the process induced strain during
fabrication of thermosetting composites”, ibid.
161. Invited lecture, Hoa, S.V. and Feng, W., “Hybrid finite element method for the stress analysis of
laminated composite structures”, presented at the European Congress in Applied Science and
Engineering 2000, Barcelona, Spain, September 11-14, 2000.
26
November 2013
Suong Van HOA
Curriculum vitae

162. He, K., Hoa, S.V., and Ganesan, R., “Three dimensional triangular-prism partial-hybrid-stress
finite element- a new element for analysis of interlaminar stresses in laminated composites”,
CADCOMP 2000, Computer Methods in Composite Materials and Structures, Bologna, Italy, Sept.
13-15, 2000.
163. Sheng, S.Z. and Hoa, S.V., “A three dimensional micro-mechanical analysis of woven fabric
composites”, Proceedings of the CSME Forum, Montreal, Quebec, May 16-19, 2000.
164. Hoa, S.V., “Applications of polymer matrix composites”, Proc. of the 3rd Canada-Japan workshop
on Composites, Kyoto, Japan, March 6-10, 2000.
165. Sheng, S.Z. and Hoa, S.V., “From micro-geometry to macro-properties: Modeling of textile
composites”, Proc. of the Meso-Mechanics 2000 conference, Xian, China, June 13-16, 2000.
166. Sheng, S.Z. and Hoa, S.V., “Modeling of 3D interlock woven fabric composites”, Proc. of
American Society for Composites conference, Austin, Texas, Sept. 2000.
167. Hoa, S.V., Ton-That, M.T., and Azuelos, O., “Enhancing properties of epoxy using nanoclay”,
Proc. 3rd Canadian International conference on Composites, Montreal, August 2001.
168. He, K., Ganesan, R., and Hoa, S.V., “Interlaminar fracture behavior of internally tapered composite
laminates”, Proc. 3rd Canadian International Conference on Composites, Montreal, August 2001.
169. Hojjati, M., Johnston, A., Hoa, S.V., and Denault, J., “Stress relaxation behavior of Cytec FM 73
adhesive during cure”, ibid.
170. Hoa, S.V. and Sheng, S.Z., “Three dimensional model for elastic properties of textile composites”,
ibid.
171. Hoa, S.V. and Xie, M., “Interface between fiber reinforced plastic rod and concrete”, Proc. 13th
International Conference on Composites, Beijing, China, June 2001.
172. He, K., Hoa, S.V., and Ganesan, R., “ Three dimensional triangular prism partial hybrid stress
finite element- a new element for analysis of interlaminar stresses in laminated composites”, Proc.
13th International conference on Composites, Beijing, China, June 2001.
173. Hoa, S.V., Sheng S.Z., Zhao, Q., and Ouellette, P., “Determination of elastic properties
of
triax composite materials”, Proc. International conference on Materials for Advanced
Technologies, Singapore, July 2001.
174. Hojjati, M., Johnston, A., Denault, J., and Hoa, S.V., “Stress relaxation of Cytec FM 73
adhesive during cure”, Proc. 3rd Canadian International Conference on Composites,
Montreal, August 2001.
175. He, K., Gansean, R., and Hoa, S.V., “Interlaminar fracture behavior of internally tapered
composite laminates”, ibid.
176. Hoa, S.V. and Sheng, S.Z., “Three dimensional model for elastic properties of textile
composites”, ibid.
177. Hoa S.V., Azuelos, O., and Ton-That, M.T., “Enhancing properties of epoxy resin using
nanoclay”, ibid.
178. Balike, M., Hoa, S.V., and Rakheja, S., “Development of crash elements for automotive
applications”, Proc. International Conference on Multidisciplinary Design in Engineering,
CSME, Montreal, November 2001.
179. Hoa, S.V., “Design of a composite rod for the reinforcement of concrete”, ibid.
180. Hoa, S.V., Zhao, Q., Ouellette, P., and Moudrik R., “Analysis of triax composites for
satellite applications”, 3rd Annual Aerospace Technology Collaboration Forum, Montreal,
27
November 2013
Suong Van HOA
Curriculum vitae

May 1-2, 2002.
181. Invited lecture, Hoa, S.V., “Combined use of polymer composites and metals in engineering
structures”, International Conference of Metallurgists, Montreal, August 12-15, 2002.
182. Hoa, S.V., “Development of a new composite rod for the reinforcement of concrete”
Technical conference of the Canadian Society of Civil Engineers, April 2002.
183. Hoa, S.V. “Analysis of triax composites for satellite applications”, 23rd International
Congress of Aeronautical Sciences, Toronto, Canada, September 8-13, 2002.
184. Hoa, S.V., Zhao, Q. and Ouellette, P., “Mechanical behavior of triax composites using special
finite elements”, American Society of Composites 17th Technical Conference, Purdue
University, Indiana, October 2002.
185. Hoa, S.V. and Ouellette, P., “Monitoring the history of shrinkage of thermoset resins” ibid.
186. Ganesan, R., He, K., and Hoa, S.V., “Interlaminar fracture behavior of internally tapered
composite laminates”, ibid.
187. Hoa, S.V., Zhao, Q., and Moudrik, R., “Analysis of a membrane Art Reflector made of triaxial
fabric composites”, 4th Canada-Japan workshop on Composites, September 2002.
188. Ton-That M.T., Cole K. and Hoa S.V., “Epoxy nanocomposites, Curing kinetics and
performance”, 4th Canada-Japan workshop on Composites, Vancouver, September 2002.
189. Hoa, S.V., Zhao, Q., Ouellette, P., and Moudrik R., “Analysis of triax composites for satellite
applications”, 3rd Annual Aerospace Technology Collaboration Forum, Montreal, May 1-2, 2002.
190. Ton-That, M.T., Cole, K., Hoa, S.V., and Shen, D., “Effect of temperature on the preparation of
nanocomposites with nanoclays”, Proc. 4th Canada Japan workshop on Composites, CRC Press,
September 2002, pp.491-499.
191. Hoa, S.V. “Development of a new composite rod for the reinforcement of concrete” Technical
conference of the Canadian Society of Civil Engineers, April 2002.
192. Hoa, S.V., “Analysis of triax composites for satellite applications”, 23rd International Congress of
Aeronautical Sciences, Toronto, Canada, September 8-13, 2002.
193. Hoa, S.V., Zhao, Q., and Ouellette, P., “Mechanical behavior of triax composites using special
finite elements”, American Society of Composites 17th Technical Conference, Purdue University,
Indiana, October 2002.
194. Hoa, S.V. and Ouellette, P., “Monitoring the history of shrinkage of thermoset resins” ibid.
195. Ganesan, R., He, K., and Hoa, S.V., “Interlaminar fracture behavior of internally tapered composite
laminates”, ibid.
196. Hoa, S.V., Zhao, Q., and Moudrik, R., “Analysis of a membrane Art Reflector made of triaxial
fabric composites”, 4th Canada-Japan workshop on Composites, September 2002.
197. Ton-That, M.T., Cole, K., and Hoa, S.V., “Epoxy nanocomposites, Curing kinetics and
performance”, 4th Canada-Japan workshop on Composites, Vancouver, September 2002.
198. Sharifi, S., Chen, M., and Hoa, S.V., “A cellular manufacturing approach to composite
manufacturing of automotive component parts”, Proc. American Society for Composites Conference,
Florida, October 2003.
199. Liu, W., Hoa, S.V., and Pugh, M., “Organoclay modified high performance epoxy for advanced
composites”, Proc. SAMPE 2003 conference, Long Beach, California, May 2003.
200. Ton-That, M.T., Ngo, T.D., Ding, P., Fang, G., Cole, K.C., and Hoa, S.V., “Epoxy
Nanocomposites, Analysis and Kinetics of Cure”, Proc. Polymer Nanocomposites Conference,
28
November 2013
Suong Van HOA
Curriculum vitae

Industrial Materials Institute, National Research Council of Canada, October 2003.
201. Hoa, S.V., Ouellette, P., Fews, R., D’Arienzo, V., and Beaulieu, P., “Development of method for
in-situ cure monitoring of graphite/epoxy composites using ultrasonics”, Proc. Canadian Aeronautics
and Space Institute, 16th Aerospace Structures and Materials Symposium, Montreal, April 2003.
202. Bao, X.B., Hoa, S.V., and Bao, X., “Cracks and Delamination detection in composite laminates
using embedded fiber optic sensors”, Proc. International Workshop on Structural Health Monitoring,
Stanford University, September 2003.
203. Hoa, S.V. and Bao, X., “Monitoring of cracks and delamination of tapered composite laminates by
using embedded extrinsic Fabry-Perrot Interferometric optical fiber sensors”, Proc. CANSMART
Conference, Montreal, October 2003.
204. Wang, H., Wood-Adams, P., and Hoa, S.V., “The effect of multi-functional organoclay on the
properties of clay/epoxy nano-composites”, Proc. 2003 Canadian International Conference on
Composites, Ottawa, Canada August, 2003.
205. Zhao, Q. and Hoa, S.V., “Thermal behavior of Triaxial Woven Fabric (TWF) composites with
open holes”, Proc. 2003 Canadian International Conference on Composites, Ottawa, Canada, August
2003.
206. Liu, W., Hoa, S.V., and Pugh, M., “Morphology and performance of epoxy nano-composites
modified with organoclay and CTBN rubber”, ibid.
207. Wang, H., Wood-Adams, P., and Hoa, S.V., “Epoxy nano-composites using trifunctional clay”,
ibid.
208. Hoa, S.V. and Ouellette, P., “Shrinkage monitoring of thermoset composites”, Proc. International
Conference on Composite Materials, ICCM 14, San Diego, July 2003.
209. Liu, W., Hoa, S.V., and Pugh, M., “Organoclay modified high performance epoxy for composites”,
ibid.
210. Liu, W., Hoa, S.V. and Pugh, M., “Improvement of properties of epoxy using rubber and
nanoclay”, Proc. Polymer Nano-composite conference, Industrial Materials Institute, National
Research Council of Canada, October 2003.
211. Wang, H., Wood-Adams, P., and Hoa, S.V., “Effect of stoichiometry ratio on the micro-nano
structures of epoxy resin and its nano-composites”, ibid.
212. Ton-That, M.T., Lei, S., Cole, K., and Hoa, S.V., “Effect of coupling agents in polypropylene
nano-composites”, ibid.
213. Key note address. Hoa, S.V., “Advanced polymer composites”, International conference on
industrial applications of nano-materials and advanced composites”, Hong Kong, February 2004.
214. Hoa, S.V., “Fracture toughness of epoxy nano-composites”, ibid.
215. Hoa, S.V. and Yu, Xin, “Design of a new composite rod for the reinforcement of concrete”,
Canadian Design Engineering Network Conference, Montreal, June 2004.
216. Hoa, S.V., Liu, W., and Pugh, M., “Augmentation of fracture toughness of epoxy using nanoclays
and rubber”, 5th Canada-Japan workshop on Composites, Yonezawa, Japan, September 2004.
217. Bao, X., Hoa, S.V., Bao, X., Du, X., and King, P., “Damage detection in composite laminates
under low velocity impact using embedded fiber Bragg Grating sensors”, ibid.
218. Hu, S., Ganesan, R., and Hoa, S.V., “Measurement and Stochastic field modeling of surface
roughness of composite plates manufactured using RTM”, ibid.
219. Nakai, A., Hamada, H., Laberge-Lebel, L., Hasan, S., Guay, F., and Hoa, S.V., “Fabrication and
29
November 2013
Suong Van HOA
Curriculum vitae

mechanical properties of long fiber reinforced thermoplastic composite”, ibid.
220. Liu, W., Hoa, S.V., and Pugh, M., “Effect of processing parameters on properties on epoxy
nanocomposites”, Polymer Nanocomposites Conference, San Francisco, September 2004.
221. Hassan, S. and Hoa, S.V., “Characterization and mechanical properties of carbon/PEKK
thermoplastic composites”, Proc. SAMPE Annual Conference, Long Beach, California, May 2005.
222. Hoa, S.V., Wu, L., and Wang, H., “Epoxy with flammability resistance for civil engineering
applications”, Proc. 3rd International Conference on Composites in Construction, Lyon,
France,
July 2005.
223. Hong, H., Hoa, S.V., Pugh, M., Bhuiyan, N., and Siddiqui, K., “A new approach for the capstone
design project at the Department of Mechanical and Industrial Engineering at Concordia University”,
Canadian Design Engineering Network Conference, Kananaskis, Alberta, July 2005.
224. Wang, H., Hoa, S.V., and Wood-Adams, P., “A new method for the processing of epoxy/clay
nanocomposites”, Proc. 5th Canadian International Conference, Vancouver, Canada, August 2005.
225. Ngo, T.D., Ton-That, M.T., Hoa, S.V., and Cole, K.C., “Epoxy nanocomposites: The influence of
behavior of curing agent and preparation methods on Curing kinetics and mechanical properties”,
ibid.
226. Liu, W., Hoa, S.V., and Pugh, M., “Fracture toughness and water uptake of epoxy/clay
nanocomposites”, Proc. American Society for Composites Annual Conference, Drexel
University, Philadelphia, August 2005.
227. Lebel, L. and Hoa, S.V., “Manufacturing of braided thermoplastic composites with commingled
fibers”, ibid.
228. Zhao, Q. and Hoa, S.V., “Modification of mechanical properties of epoxy resin with micro/nano
particles”, Proc. 7th International Mesomechanics conference, Montreal, August 2005.
229. Zhao, Q. and Hoa, S.V., “Effects of particle size on stress and toughness of epoxy
nanocomposites”, Proc. Polymer Nanocomposites conference, Montreal, September 2005.
230. Ngo, T.D., Ton-That, M.T., Hoa, S.V., and Cole, K.C., “The influence of type of organoclay ad
preparation method on curing kinetics and mechanical properties of epoxy nanocomposites”, ibid.
231. Plenary lecture, Hoa, S.V., “Activities on composites in Canada”, American Society for
Composites Annual Conference, Drexel University, Philadelphia, September 2005.
232. Abdella, I., Rahmizadeh, T., Hoa, S.V., and Trueman, C. “Experimental and theoretical evaluation
of shielding effectiveness and electrical conductivity of carbon/epoxy composites”, COM 2006,
Montreal, October 2006.
233. Abdella, I., Rahimzadeh, T., Trueman, C., and Hoa, S.V., “Shielding effectiveness and electrical
conductivity of carbon/epoxy composites“, Proc. SAMPE International conference and exhibition,
Long Beach, California, May 2006.
234. Liu, W., Hoa, S.V, and Pugh, M. “Water absorption in nanoclay/epoxy nanocomposites”, ibid.
235. Lebel, L. and Hoa, S.V., “Processing and characterization of braided commingled carbon/nylon
thermoplastic composites”, ibid.
236. Allaoui, A., Hoa, S.V., and Pugh, M., “Effect of preparation method on the electrical properties of
carbon nanofiber/epoxy nanocomposites”, Proc. 6th Canada Japan workshop on Composites,
Toronto, Canada, August 2006.
237. Liu, W., Hoa, S.V., and Pugh, M., “Epoxy/clay nanocomposites. Model to calculate diffusion
coefficient due to water absorption”, ibid.
30
November 2013
Suong Van HOA
Curriculum vitae

238. Wu, L., Hoa, S.V., and Wang, H., “Improvement of flammability resistance of epoxy using
nanocomposites”, ibid.
239. Ngo, T.D., Ton-That, M.T., Hoa, S.V., and Cole, K.C. “Rubbery and glassy epoxy/clay
nanocomposites”, ibid.
240. Hu, S., Hoa, S.V., and Ganesan, R., “Evaluation of surface finish of composite automotive panels”,
Proc. American Society for Composites, Detroit, September 2006.
241. Ngo T.D., Hoa S.V., Ton That M., “Effect of shearing on dispersion, interaction, exfoliation of
clay in epoxy”, Proceedings of the 16th International Conference on Composite Materials, ICCM,
Kyoto, Japan, July 2007.
242. Allaoui, A., Hoa, S.V., and Pugh, M., “Nano-carbon fillers in a resin matrix: electrical properties”,
ibid.
243. Hu, S., Hoa, S.V., and Ganesan, R., “Surface finish of automotive composite panels” ibid.
244. Hoa, S.V., Ngo, T.D., Ton-That, M.T., “Epoxy Nanocomposites”, Keynote address, International
Conference on Advances and Trends in Engineering Materials and their applications (ATEMA
2007), Montreal, August 2007.
245. Thatte, G., Hoa, S.V., Merle, P., Haddad, E., “Self healing epoxy for space applications”, Proc.
first international conference on self-healing materials, Noordwijk, Netherlands, April 2007.
246. Xu, Y. and Hoa, S.V., “Properties enhancement of carbon fiber reinforced epoxy clay
nanocomposites”, Proc. Canadian International conference on composites, Winnipeg, August 2007.
247. Hoa, S.V., Ngo, T., Ton-That, M.T., and Wood-Adams, P., “High shear mixing and dispersion
model for thermoset polymer nanocomposites”, ibid.
248. Mohiuddin, M. and Hoa, S.V., “Electrically conductive carbon nanofiber based thermoplastic
composites for fusion bonding”, Proc. SAMPE 2007, Baltimore, June 2007.
249. Allaoui, A., Hoa, S.V., and Pugh, M., “Electrical transport properties of carbon nanofiber epoxy
composites”, Proc. Polymer Nanocomposites conference, Industrial Materials Institute, National
Research Council of Canada, October 2007.
250. Ngo, T.D., Ton-That, M.T., Hoa, S.V., and Cole, K.C., “Preparation and properties of epoxy
nanocomposites Part I: The effect of premixing on dispersion of organoclay”, ibid.
251. Ngo, T.D., Ton-That, M.T., Hoa, S.V., and Cole, K.C., “Preparation and properties of epoxy
nanocomposites Part 2: Effect of dispersion and intercalation /exfoliation of organoclay on
mechanical properties”, ibid.
252. Ngo, T.D., Hoa, S.V., Ton-That, M.T., and Cole, K.C., “Fracture toughness of epoxy
nanocomposites: the effect of dispersion, clay concentration and epoxy chemistry”, Proc. 7th Canada
Japan workshop on Composites, Fujisawa, Japan, August 2008 (published by Destech Publications).
253. Hoa, S.V., Invited featured lecture, “Polymer Nanocomposites research in Canada, SAMPE Fall
technical conference and exhibition, Memphis, Tennessee, September 2008.
254. Nofar, R., Hoa, S.V., and Pugh, M., “Carbon nanotube network as a strain indicator and failure
predictor in polymer matrix composites subjected to static and dynamic loads”, Proc. 23rd Annual
technical conference, American Society for Composites, Memphis, Tennessee, September 2008.
255. Ahmed, A.F. and Hoa, S.V., “Development and analysis of a hybrid reinforced composite material
for solid rocket motor insulation”, ibid.
256. Ngo, T.D., Hoa, S.V., and Ton-That, M.T., “Effect of shearing on dispersion, interaction,
exfoliation or clay in epoxy”, Proc. 16th Inter. Conf. on composite materials, Kyoto, July 2007.
31
November 2013
Suong Van HOA
Curriculum vitae

257. Allaoui, A., Hoa, S.V., and Pugh, M., “Nano carbon fillers in a resin matrix: electrical properties”,
ibid.
258. Hu, S., Hoa, S.V., and Ganesan, R., “Surface finish of automotive composite panels”, ibid.
259. Mehdipour, A., Rosca, I.D., Trueman, C.W. Sebak, A.R., Hoa, S.V, Shielding Effectiveness
Analysis of Reinforced Continuous Carbon Fiber (RCCF) Composites: Numerical and Experimental
Study”, Proc. First joint US/Canada conference on composites, University of Delaware, September
15-17, 2009.
260. Mehdipour, A., Rosca, I.D., Trueman, C.W., Sebak, A.-R., and Hoa, S.V., “High frequency
shielding properties of multiwall carbon nanotube (MWCNT) composites” ibid.
261. Fathy, A.A. and Hoa, S.V. “Development and analysis of a hybrid reinforced composite material
for solid rocket motor insulation”, ibid.
262. Rosca, I.D. and Hoa, S.V., “Conductive nanocomposites based on mass produced carbon
nanotubes and epoxy resin” ibid.
263. Zhao, Q., Hoa, S.V., and Gao, J., “A new coupling method of atomistic-continuum FE
methods”, ibid.
264. Liu, X.D., Hoa, S.V., and Chen, M., “Cost analysis for manufacturing of composite aerospace
products with uncertainties”, ibid.
265. Mehdipour, A., Sebak, A-R., Trueman, C.W., and Hoa, S.V., “Carbon fiber composite T-match
folded bow-tie antenna for RFID applications”, Proc. IEEE Antenna and Propagation Symposium
(APS 2009), Charleston, South Carolina, USA, June 1-5, 2009.
266. Zhao, Q., Hoa, S.V., and Gao, J., “Interface fracture of bicrystal in multiscale” Proc. ICF12,
Ottawa, May 2009.
267. Mohiuddin, M. and Hoa, S.V., “Effect of temperature and compression on electrical conductivity
of CNT-PEEK composites”, Proc. ICCM17, Edinburgh, July 2009.
268. Fathy, A. and Hoa, S.V., “Optimization and thermal conduction modeling for a hybrid reinforced
composite material for solid rocket motor insulation”, ibid.
269. Nofar, R., Hoa, S.V., and Pugh, M., “Self-sensing glass/epoxy composites using carbon
nanotubes”, ibid.
270. Sanchez-Garcia, D., Lagaron, J.M., and Hoa, S.V., “Development and characterization of novel
biocomposites with carbon nanofiber and carbon nanotubes”, ibid.
271. Ngo, T.D., Ton-That, M.T., Singh, R.P., and Hoa, S.V., “The potential bio based polymer and their
nanocomposites for composite structure” ibid.
272. Liu, W., Hoa, S.V., and Haddad, E., “Self healing materials for space applications” Proc. Second
international conference on self healing materials, Chicago, USA, June 2009.
273. Fathy, A. and Hoa, S.V., “Development of asbestos free composites for rocket motor insulation”,
Proc. Canadian Congress of Applied Mechanics, Halifax, May 2009.
274. Fathy, A. and Hoa, S.V., “Development of asbestos free composites for rocket motor insulation”,
Proc. Canadian Congress of Applied Mechanics, Halifax, May 2009.
275. Mehdipour, A., Rosca, I.D., Sebak, A.R., Trueman, C.W., and Hoa, S.V., “Advanced carbon fiber
composite materials for RFID Tag antenna applications”, ACES conference, Chicago, May 2009.
276. El Tahan, M., Hoa, S.V., and Galal, K., “Mechanical characteristics of new thermoplastic CFRP
rebars for reinforcing concrete elements”, Proc. 8th int. conf. on short and medium span bridge,
Niagara Falls, Jul 2010.
32
November 2013
Suong Van HOA
Curriculum vitae

277. Mohiuddin, M. and Hoa, S.V., “Effect of pressure on electrical conductivity of PMMA/ CNT
nanocomposites”, Proc. 25th American Society for Composites conference, Dayton, Ohio,
September 2010.
278. Sinaei, H. and Hoa, S.V., “Improving of thermal conductivity of epoxy by adding carbon
nanotubes and short carbon fibers for the manufacturing of thick composites”, ibid.
279. Mohiuddin, M. and Hoa, S.V., “Effect of pressure on electrical conductivity of PEEK/CNT
nanocomposites”, Proc. TNT2 conference, Portugal, September 2010.
280. Wei Wang, Y., Chen, M., and Hoa, S.V., “Cost analysis for the manufacturing of composite wind
turbine blades”, Proc. 8th Canada-Japan workshop on composites, Montreal, July 2010.
281. Bui, K.A., Hoa, S.V., Ton-That, M.T., and Ngo, T.D., “Effect of nanoclay on fracture toughness of
vinyl ester resins”, ibid.
282. Rosca, I.D., Mactabi R., and Hoa, S.V., “Influence of the carbon nanotube type, loading and
chemical functionalization on the fatigue resistance of aluminum lap joints”, Proc. 26th symposium
of the international committee on aeronautical fatigue, Montreal, June 1-3, 2011.
283. Hesna-Zamal, H. and Hoa, S.V., “Fatigue damage behavior of glass/epoxy composites using
carbon nanotubes as sensors”, ibid.
284. Kabir, A. and Hoa, S.V., “Improvement of vibration damping and flexural fatigue property
incorporating nanoclay into glass/epoxy composites”, ibid.
285. Zhao, Q. and Hoa, S.V., “Thermal Stresses of Thermoplastic Composite Rings in Automated
Fiber Placement Process”, Proc. 26th American Society for Composites/Second joint US-Canada
conference on composites, Montreal, September 2011.
286. Rowghanian, P. and Hoa, S.V., “Improvement of Temperature Distribution Across Thick Thermoset
Composite Laminates Using Carbon Nanotubes”, ibid.
287. Khan, S., Xie, W.F., and Hoa, S.V., “Thermal Control System Design for Automated Fibre
Placement Process” ibid.
288. Mactabi, R., Rosca, I.D., and Hoa, S.V., “In-Situ Health Monitoring of Adhesively Bonded
Aluminum Joints Using Carbon Nanotubes”, ibid.
289. Derisi, B., Hoa, S.V., Xu, D., and Hojjati, M., “A Simulation Procedure for the Design of
Composite Tubes with Large Deformability” ibid.
290. August, Z., Quinn, C., Xiao, C., and Hoa, S.V., “Effects of liquid environment on the mechanical
performance of carbon fiber reinforced thermoplastic stiffened structures made using automated fiber
placement”, ibid.
291. Shadmehri, F., Xiao, C. Hojjati, M., Chen, J., and Hoa, S.V., “Determination of Optimal Process
Parameters for Manufacturing Thermoplastic Composite Rings by Automated Fiber Placement”,
ibid.
292. Mehdipour, A., Rosca, I.D., Trueman, C., Sebak, A., and Hoa, S.V., “Advanced Carbon Fiber
Composite (CFC) Materials for Antenna Applications”, ibid.
293. Mehdipour, A., Rosca, I.D., Trueman, C., Sebak, A., and Hoa, S.V., “Reinforced Continuous
Carbon Fiber (RCCF) Composite Materials for Microwave Applications” ibid.
294. Rosca, I.D. and Hoa, S.V., “Electrically conductive structural adhesive based on bucky papers”,
Proc, 18th International conference on composite materials, Jeju, Korea, August 2011.
33
November 2013
Suong Van HOA
Curriculum vitae

295. Tong, R., Hoa, S.V., and Chen, M., “Cost Analysis on L-shape Composite Component
Manufacturing”, Proc, 18th International conference on composite materials, Jeju, Korea, August
2011.
296. Shadmehri, F., Cai, X., Hoa, S.V., Hojjati, M., and Chen, J., “Effect of autoclave process on the
quality of thermoplastic cones manufactured using automated fiber placement technique”, SAMPE
2011, May 23-26, 2011.
297. Derisi, B., Hoa, S.V., Xu, D., Hojjati, M., and Fews, R., “Effect of the layup sequence on the
toughness and large deformation of composite tube in bending”, International conference on
composite structures 16, Porto, Portugal, June 2011.
298. Shadmehri, F., Hoa, S.V., and Hojjati, M., “Buckling of conical composite shells”, International
conference on composite structures 16, Porto, Portugal, June 2011.
299. Khan, A.M., Aissa, B., Haddad, E., Higgins, A., and Hoa, S.V., “Experimental Investigation of the
Self Healing Performance of CFRP Composite Subjected to High Velocity Impact”, International
conference on self healing materials, University of Bath, UK, June 2011.
300. Chaeichian, S., Hoa, S.V., and Wood-Adams, P., “In situ polymerization of unsaturated polyester
hybrid systems for the preparation of clay nanoccomposites: Mechanical properties”, 15th European
conference on composites, Venice, Italy, June 2012.
301. Rosca, I.D. and Hoa, S.V., “Conductive structural adhesive with low thermal expansion coefficient
for aerospace applications”, 15th European conference on composites, Venice, Italy, June 2012.
302. Cai, X., Shadmehri, F., Hojjati, M., Chen, A., and Hoa, S.V., “Determination of optimum process
conditions for processing AS4/APC-2 thermoplastic composites by automated fiber placement”,
Proc. SAMPE conference, Boston, May 2012.
303. Hoa, S.V., “Automated manufacturing of composites using automated fiber placement”, 9th
Canada-Japan workshop on composites, Kyoto, Japan, July 2012.
304. Ahmed, K. and Hoa, S.V., “Damping and fatigue properties of glass/epoxy composites with
nanoclay addition”, 37th Annual conference of the American Society for Composites, Arlington,
Texas, October 2012.
305. Naghashpour, A. and Hoa, S.V., “Through the thickness strain measurement in composite
laminates using carbon nanotubes”, ibid.
306. Hoa, S.V. and Ahmed, K., “Effect of nanoclay addition on the fatigue behavior of glass/epoxy
laminates”, Annual technical conference of the Society for Engineering Science, Atlanta, Georgia,
October 2012.
307. Rosca, I.D. and Hoa, S.V. “Effect of carbon nanotubes on the thermal conductivity of
carbon/epoxy composites “, International conference on aerospace technology, Paris, France,
November 2012.
308. Shadmehri, F., Xiao, C., Hoa, S.V., Hojjati, M., “Thermoplastic composite cones”, ibid.
309. Mehdipour A., Denidni Tayeb, Sebak Abdel, Trueman Chris W., Rosca Iosif, Hoa Suong V.,
“Anisotropic carbon fiber nanocomposites for mechanically reconfigurable antenna applications”, Proc.
2013 IEEE International Symposium on antenna applications, Florida, USA, July 2013.
310. Invited keynote lecture, Hoa S.V., “Automated composites manufacturing for aerospace
applications”, Proc. of the 4th International Conference on the Advances in composite materials, Goa,
India, Feb. 2013.
34
November 2013
Suong Van HOA
Curriculum vitae

311. Invited key note lecture, Hoa S.V., “ Unique composite structures made by automated
manufacturing”, Proc. of the 17th International conference on composite structures, Porto, Portugal, June
2013.
312. Cai Xiao, Devault Franck, Hoa Suong, and Sedaghati Ramin, “A comparison of current design
concepts of fuselage panels under typical load conditions”, Proc. 19th International Conference on
Composite Materials, Montreal, July 2013.
313. El Geuchy Mohamed., Hoa Suong, Shadmehri Farjad, “Bending stiffness behavior of thick walled
composite tubes”, ibid.
314.Chaeichian Sina, Wood Adams Paula, and Hoa Suong, “Effect of morphology on fracture toughness
of thermoplastic/thermoset/clay hybrid composites”, ibid.
315. Zhang Canhui, Hoa Suong and Liu Pei, “Improvement of limit-based approach to stress analysis for
orthotropic composite cylinders (0/90) subjected to pure bending”, ibid.
316. Ghayoor Hossein and Hoa Suong, “Modelling of deformation of layers in thermoplastic composites
manufactured by automated fiber placement”, ibid.
317. Naghashpour Ali, and Hoa Suong, “Through thickness electrical resistance in glass/epoxy/CNTs
composite laminates subjected to mechanical loading”, ibid.
318.. Madhok Kulbir Singh, Naghashpour Ali and Hoa Suong, “Comparative characterization of the TC250 out of autoclave material made by hand lay up and automated fiber placement processes”, ibid.
320.Rosca Iosif Daniel, and Hoa Suong, “Electrically conductive adhesives for CFRP composites based
on nickel nanostrands and carbon nanotubes”, ibid.
321.Hoa S.V., “Recent developments in automated composites manufacturing”, ibid.
322.Shadmehri Farjad, Hoa Suong, and Hojjati Mehdi, “Bending test of thermoplastic composite cone”,
ibid.
323. El Geuchy Mohamed, Hoa Suong, and Shadmehri Farjad, “Behavior of thick composite tubes under
pure bending load”, Proc. American Society of Composites Annual Technical conference, Pennsylvania,
September 2013.
324.Fortin Simpson Jeffrey, El Geuchy Mohamed, Shadmehri Farjad and Hoa Suong, “Effect of
processing parameters on the bending behavior of thermoplastic composite tubes made by automated
fiber placement process”, ibid.
325. Key note lecture, Hoa S.V., Thermoplastic composite tubes made by automated fiber placement”,
Third International Symposium on Advanced Textile Science and Technology, Zhejiang Sci-Tech
University, Hangzhou, China, November 2013.
326. Ghayoor H., Shadmehri F., and Hoa S.V., “Development of experimental technique for measuring
strain and deformation in manufacturing of thermoplastic composites using automated fiber placement”,
SAMPE , Seattle, Washington, June 2014.
327. Rouhi M., Ghayoor h., Hoa S.V., and Hojjati M., “Effect of thickness ratio and load direction on
structural performance of variable thickness composite cylinders”, SAMPE, Seattle, Washington, June
2014.
328. Naghashpour A., and Hoa S.V.,”A technique for in-situ health monitoring of large polymer
composite structures made of carbon fibers and carbon nanotube networks”, Proc. 16th European
Conference on Composite Materials, Seville, Spain, June 2014.
35
November 2013
Suong Van HOA
Curriculum vitae

329. Naghashpour A., and Hoa S.V., “Effects of distance between electrodes, proximity of electrodes to
damage, plate size, carbon nanotube (CNT) concentrations, and damage severity on change in electrical
resistance for in-situ damage detection, location and quantification in glass fiber/epoxy plates containing
CNT”, Proc. 10th Canada Japan workshop on composites, Vancouver, Canada, August 2014.
330. Gorjipoor A., Hoa S.V. and Ganesan R., “Stress analysis of f thick composite laminate with a
bolted joint”, Proc. 10th Canada Japan workshop on composites, Vancouver, Canada, August 2014.
331. Kaganj A., Hoa S.V., Hojjat M., Lebel L., and Heroux S. “Stamp forming of S-shape thermoplastic
composites”, Proc. 10th Canada Japan workshop on composites, Vancouver, Canada, August 2014.
C. BOOKS
1. Hoa, S.V., Analysis for Design of Fiber Reinforced Plastic Vessels and Piping, Technomic
Publishers, Connecticut, 1991.
2. Hoa, S.V., ed. Computer Aided Design of Polymer Matrix Composite Structures, Marcel Dekker,
New York, 1995.
3. Hoa, S.V. and Feng, W., Hybrid finite element method for stress analysis of laminated composites,
Kluwer Academic, 1998.
4. Gay, D., Hoa, S.V., and Tsai, S.W., Composite Materials, Design and Applications, CRC Press,
2002.
5. Gay, D. and Hoa, S.V., Composite Materials, Design and Applications, second edition, CRC Press,
2007.
6. Hoa, S.V., Principles of the manufacturing of composite materials, Destech, 2009.
D. CONFERENCE PROCEEDINGS EDITED
1.
2.
3.
4.
5.
6.
7.
8.
Sih, G., Pindera, J., and Hoa, S.V., Eds., "Analytical and Testing Methodologies for Design with
Advanced Materials," Proceedings of the ATMAM '87 Conference, Montreal, Elsevier
Science
Publishers, 1987.
Sih, G., Hoa, S.V., and Pindera, J., Eds., "Development and Design with Advanced Materials,"
Proceedings of the ATMAM '89 Conference, Montreal, Elsevier Science Publishers, 1990.
Hoa, S.V. and Gauvin, R., Eds. “Composite Structures and Materials”, Proceedings of the 1st
Canadian International Conference and Exhibition on Composites, Elsevier Applied Science, 1992.
Wallace, W., Gauvin, R., and Hoa, S.V., Eds., Proceedings of the 2nd Canadian International
Conference on Composites, Ottawa, Canada, September 1993, published by the Canadian
Association for Composite Structures and Materials.
Sih, G.C., Hoa, S.V., and Pindera, J., Eds., Proceedings of the International Conference on Design
and Manufacturing using Composites, ATMAM 94 conference, August 1994.
Hoa, S.V. and Hamada, H., “Design and Manufacturing of Composites”, Proceedings of the first
Canada0Japan workshop on Composites, Technomic, Pennsylvania, 1997.
Hoa, S.V. and Hamada, H., Eds., “Design and Manufacturing of Composites”, Proceedings of the
2nd Joint Canada-Japan workshop on Composites, Technomic Publishing Co., Pennsylvania, 1998.
Hoa, S.V., DeWilde, W.P., and Blain, W.R., eds., “Computer Methods in Composite Materials VI”,
36
November 2013
Suong Van HOA
Curriculum vitae

Proceedings of the 6th International conference on Computer Methods in Composite Materials
Technology, WIT Press, 1998.
9. Hoa, S.V., Hamada, H., Lo, J., and Yokoyama, A., “Design and Manufacturing of composites”,
Proceedings of the 3rd Canada Japan workshop on Composites, Technomic,
Pennsylvania,
2000.
10. Hoa, S.V., Johnston, A., and Denault, J., Eds “Design, Manufacturing and Applications of
Composites”, 3rd Canadian International Conference on Composites, Technomic, August
2001.
11. Lo, J., Hamada, H., Poursartip, A., Nakai, A., and Hoa, S.V., Eds, ”Design, Manufacturing and
Applications of Composites”, Proc. Fourth joint Canada-Japan workshop on Composites,
CRC Press, September 2002.
12. Lo, J., Hamada, H., Kuriyama, T., Morii, T., Mizoguchi, M., Nakai, A., Hoa, S.V., Poursartip,
A., Eds., “Design, Manufacturing and Applications of Composites”, Proc. Fifth Canada Japan
workshop of Composites, Destech Publications, 2004.
13. Lo, J., Nishino, R., Hoa, S.V., Hamada, H., Nakai, A., and Poon, C., Eds, “Design, Manufacturing
and Applications of Composites, Proc. 6th Canada Japan workshop on Composites, Destech
Publications, 2006.
14. Poon, C., Morii, T., Lo, J., Nakai, A., Hoa, S.V., and Hamada, H., “Design, Manufacturing and
Applications of composites”, Proc. 7th Canada-Japan workshop on composites, Destech
Publications, 2008.
15. Gillespie, J. and Hoa, S.V., Proc. 24th American Society for Composites conference, First joint
US/Canada conference on composites, Delaware, September 2009.
16. Ngo, A.D., Denault, J., Nakai, A., Morii, T., Hoa, S.V., and Hamada, H., “Design, Manufacturing
and Applications of composites”, Proc. 8th Canada Japan workshop on composites, Destech
Publications, 2010.
17. Hyer, M., Hoa, S.V., and Ochoa, O., Proceedings of the 26th ASC conference/Second joint USCanada conference on composites, Montreal, September 2011, published by Destech.
18. Hamada H., Yang A. and Hoa S.V., Proceedings of the 9th Canada Japan workshop on composites,
Destech Publication, 2012.
19. Hoa S.V. and Hubert P., Proceedings of the 19th International Conference on Composite Materials,
published by the Canadian Association for Composite Structures and Materials, 2013.
E. PATENTS
1. Hoa, S.V., Janardhanam, R. and Kidd, J., "Method and apparatus for identifying and locating a leak
in the inner liner of a vessel having a laminated wall structure", US Patent #5,191,785, March 9,
1993. Canadian patent #2,040,552, 1993.
2. Hoa, S.V., Liu, W., Pugh, M., and Ton-That, M.T., “Process for manufacturing epoxy
nanocomposites and process thereof”, Canadian patent number 2,541,698 (November 1, 2011), and
USA patent 8,227,527-B2, July 2012.
3. Haddad, E., Merle, P., Hoa, S.V., Thatte, G., Guntzberger, Y., “Self Healing composite material and
method of manufacturing same”, US patent application No. 11/873,950, 2007.
4. Hoa, S.V., and Rosca, I.D, “Bucky paper adhesive for joining structural elements”, US patent
37
November 2013
Suong Van HOA
Curriculum vitae

application January 2010 (US 61294219).
5. Fews, R., Derisi, B., Hoa, S.V., and Hojjati, M., “Fiber reinforced composite structural member
exhibiting non linear strain to failure and method of making same”, Canadian application (CA
02635524, June 20, 2008).
6. Hoa, S.V. and Rosca, I.D, “Bucky paper adhesive for joining structural elements”, US patent
application January 2010, (US 61294219).
7. Hoa, S.V. and Naghashpour, A., “Device for NDT of large composite structures”, Declaration of
Invention, April 2011.
8. Hoa S.V., Mehdipour A., Rosca, I.D., Trueman, C., and Sebak, A., “Multi-band antennas with
variable electrical conductivity made of polymer nanocomposites”, DOI submitted July 2011.
9.Hoa S.V., and Naghashpour A., “Method and system for detecting and locating damages in
composite structures”, PCT/CA 2012/001161, May 2013
10. Rosca I.D., Salameh M., and Hoa S.V., “Process for nanolevel dispersion of cellulose
nanocrystals (CNCs) in hydrophobic organic materials, thermosets and thermoplastics”,
Declaration of Invention filed June 2013.
F. CODE AND STANDARD
1. Laminate Theory Portion of ASME Boiler and Pressure Vessel Code, Section 10.
2. “Recommended Practice for Acoustic Emission Testing of Pressurized Highway Tankers Made of
Fiberglass Reinforced Plastic with Balsa Core”, American Society for Nondestructive Testing, 1993.
3. “Acoustic Emission Testing of Pressurized Containers Made of Fiberglass Reinforced Plastic with
Balsa Wood Cores”, ASTM Standard, E 1888-97.
G. COMMERCIALIZED COMPUTER PROGRAMS
1. Hoa, S.V. and Daoust, J., "HYBRID", a computer program for analysis of composite laminates,
distributed by Concordia University Industrial Liaison Office, 1990.
2. Hoa, S.V. and Klironomos, J., "CADFRP", a computer program for stress analysis of composite
pressure vessels, distributed by Technomic Publishing Co., Pennsylvania, 1993.
INDUSTRIAL AND CONSULTING EXPERIENCE
1976-1977
1979
1980
1981-1982
1981-1983
1982-1984
1980-2005
1984-1989
1987-1990
Design Engineer, Canadian Fram Ltd., Chatham, Ontario.
Consultant, RBL Industrial Fan Manufacturer, Plessisville, Quebec.
Consultant, Ritepro Inc., Montreal, Quebec, Canada.
Consultant, Persta Canada Ltd., Montreal, Quebec, Canada.
Consultant, InfoTech Aviation Ltd., Montreal, Quebec.
Consultant, Spar Aerospace, Montreal, Quebec.
Consultant, CPF Dualam Ltd., Montreal, Quebec, Canada.
Scientific Advisor for the PILP Grant, ABCO Plastics Ltd., Mahone Bay, Nova Scotia.
Consultant, Revenue Canada.
38
November 2013
Suong Van HOA
Curriculum vitae

1990-1992 Consultant, Troy Manufacturing.
1993-1995 Consultant, International Reinforced Plastics, Ohio, USA.
1999-2005 Consultant, Tankcon FRP Ltd., Montreal, Quebec.
1999
Consultant, ITF Inc., Montreal, Quebec.
2000
Consultant, QIT Fer Titane, Tracy, Quebec.
2000
Consultant for the Graduate Programs, University of Toronto Institute for Aerospace
Studies
2001
Consultant for the Graduate Programs, Ryerson Polytechnic University, Toronto.
2002
Consultant for Fibre de Verres Abitibi Inc., Rouyin-Noranda.
2003
Consultant for Tankcon FRP Ltd., Montreal, Quebec.
2005
Consultant for Bell Textron Canada Ltd.
2006
Consultant for the graduate program in Mechanical Engineering, University of Western
Ontario.
2011-2012 Consultant Symmetrix Ltd., Montreal, Quebec.
INTERNATIONAL MISSIONS ON TECHNOLOGY
1. Mission to Malaysia on Composites: Organized and supported by Bell Helicopter Textron
Ltd.
May 1996.
2. Mission to Paris, France on Composites: Supported by the Department of Foreign Affairs and
International Trade. March 2001.
3. Mission to Taiwan (second joint Taiwan-Canada in Aerospace): Supported by the Natural Sciences
and Engineering Research Council of Canada and organized by the Institute for Aerospace Research
(IAR) of the National Research Council of Canada. May 2001.
4. Mission of Advanced Materials to Singapore and Hong Kong: Supported by the Department of
Foreign Affairs and International Trade. June/July 2001.
5. Mission to Paris, France on Composites: Supported by the Department of Foreign Affairs and
International Trade. April 2002.
6. Mission to the U.K. on Aerospace: Supported by the Quebec Ministere de l’Industrie, de la Science
et de la Technologie, and by Consortium en Aerospace du Quebec (CRIAQ). July 2002.
7. Mission to Switzerland, France and Germany on Nanotechnology, supported by the Department of
Foreign Affairs and International Trade, November 2002.
8. Mission to Tokyo Japan on Nanotechnology, Supported by the Department of Foreign Affairs and
International Trade, February 2003.
9. Mission to Hong Kong on Nanotechnology and Advanced Composites, Supported by the Department
of Foreign Affairs and International Trade, February 2004.
10. Mission to Nanjing, China, and Yonezawa, Japan on Composites, August, September 2004.
11. Mission to India in Aerospace, November, 2006.
12. Mission to U.K. in Aerospace, October 2007.
13. Mission to Poland in Aerospace, supported by Quebec Ministry of Industry, Development and
Innovation, April 2009.
14. Mission to India in Aerospace, supported by Concordia University, February 2010.
15. Mission to Japan in Nanotechnology, supported by the Quebec Ministry of Industry, Development
39
November 2013
Suong Van HOA
Curriculum vitae

and Innovation, February 2010.
16. Mission to India in Aerospace, February 2011, supported by Concordia University.
17. Meeting on “Canadian Networking Aeronautics project for Europe, CANAPPE”, Paris, France.
Supported by Department of Foreign Affairs and International Trade, June 2011.
18. Mission to Japan on composites. Supported by the Department of Foreign Affairs and International
Trade, July 2012.
19. Mission to Israel in Aerospace, August 2012, Supported by the Quebec MDEIE.
RESEARCH GRANTS AND CONTRACTS
CRIAQ project 1.2: Consortium en Aerospace du Quebec/Bell Helicopter, Bombardier, (Project on
thermoplastic composites, (PI)
2004-2008
$450,875
CRIAQ project 1.1/Bell Helicopter, Delastek and Pratt & Whitney Canada Ltd, “Low Cost
composite wing box”, (PI)
2003-2005
$236,053
CRIAQ support for technical professional 2004-2006
$50,000
NSERC CRD/CRIAQ COMP 1-14/Industry, “Development of composite materials with high
electrical conductivity and electromagnetic shielding effectiveness”, (PI)
2006-2009
$409,511
NSERC CRD/ CRIAQ project COMP 5/ Bell Helicopter Textron, Bombardier Aerospace and
DEMA Aeronautics, “The efficient application of thermoplastic composites to a light helicopter tail
boom”, (PI)
2008-2011
$665,000
NSERC CRD/CRIAQ project COMP 1/ Bell Helicopter Textron, Bombardier Aerospace, and
Delastek Ltd, “Out-of-autoclave manufacturing of composite aerospace structures”, PI. P. Hubert
2008-2011
$915,000
CRIAQ project COMP 415 MDA, Pratt & Whitney Canada Ltd., Composites Atlantic, Epsilon Ltd.
Nanoquebec on the project “Understanding the behavior of carbon fiber reinforced composites in
extreme thermal cycling space environment and development of conductive structural adhesive for
same”, (PI)
2010-2013
$683,127
Regroupement Strategiques on Polymer Processing and Composites, Fonds de Recherche du Quebec,
Nature et Technologie (Director: Dr. P. Carreau, Co-Director Dr. S.V. Hoa, together with 45 other
researchers in Polymers and Composites in Quebec)
2004-2010
$450,000/y
Canadian Space Agency contract
2003
$15,000
MPB Technologies (self-healing materials) 2005
$23,000
MPB Technologies (self-healing materials) 2009-2010
$52,000
MPB Technologies (self-healing materials) 2011
$15,000
Member of the ISIS (Canadian Network of Centers of Excellence)
2002-2007
$190,000
Concordia University, Research Chair on Materials and Composites 2001-2015
$40,000/y
Bombardier Ltd. (Conference grant)
1998
$500
Spar Aerospace Ltd. (student support)
1998
$5,000
40
November 2013
Suong Van HOA
Curriculum vitae

Pratt & Whitney Canada Ltd. (contract)
2003
$42,000
C.P.F. Dualam Ltd. (contracts)
1998-1999
$5,000
Member of the AUTO21 Canadian Network of Centers of Excellence 2002-2005
$23,000/y
Natural Science and Engineering Research Council Canada (Operating Grants )
1978-1985
$74,058
1985-1988
$29,080/y
1988-1991
$38,360/y
1991-1994
$40,000/y
1994-1997
$38,520/y
1997-1999
$43,604/y
1999-2001
$45,785/y
2002-2007
$56,000/y
2007-2012
$49,000/y
2012-2017
$45,000/y
NSERC TPP grant/CPF Dualam Ltd. (Development of integrated composite highway tanker)
1996-1999
$343,600
NSERC CRD grant/Pratt & Whitney Canada (Development of composite outer bypass duct for the
fan jet engine)
1991-1994
$110,000/y
NSERC CRD grant/TANKCON FRP (Development of fiber reinforced plastic highway tanker with
thermoplastic liner)
1994-1996
$70,000/y
NSERC CRD grant /EMS Technologies, Canadian Space Agency (Characterization of triax
composites for satellite applications)
1999-2002
$94,500/y
PRAI Grant, PI (FRP vessels-CPF Ltd)
1981-1983
$158.550
CRD Grant (FRP vessels with CPF Ltd)
1986-1988
$250,000
1991-1993
$160,000
1994-1996
$55,000/y
(Ultrasonic monitoring of cure of graphite/epoxy composite-with Bell)
1999-2001
$22,500/y
NSERC Equipment Grants
With S. Sankar
1978-1979
$26,542
With R. Cheng
1979-1980
$45,000
Principal Applicant
1980-1981
$40,000
With R. Cheng
1981-1982
$38,686
Principal Applicant
1982-1983
$13,603
Principal Applicant
1983-1984
$39,177
Principal Applicant
1989
$53,573
Principal Applicant
1990
$137,000
Principal Applicant
1991
$63,662
With X.R. Xiao
1993-1994
$22,000
With S. Lin and X.R. Xiao (Resin transfer molding machine and Dynamic Analyzer)
1994-1997
$127,390
With K. Demirli (robotic equipment)
1998-1999
$24,540
41
November 2013
Suong Van HOA
Curriculum vitae

With R. Ganesan (extensometer)
2000-2001
$20,500
Principal applicant (FT-IR)
2001-2002
$50,000
Principal applicant (Microfluidizer)
2003-2004
$40,000
With I. Jasiuk (Nano Bionix)
2006
$130,000
Principal applicant (high temperature Autoclave) 2008
$130,000
NSERC Conference Grants
1989
$5,000
1994
$4,000
NSERC Synergy award
2006-2007
$25,000
Ministere du Quebec conference grant
2001
$10,000
Concordia University Equipment Grant
Infrastructure Grant
1983-1984
$43,000
With Prof. R.M.H. Cheng
1984-1986
$86,000
Xiao X.R., Hoa S.V., Blach A.E. (Dynamic analyzer)
1993-1994
$60,000
FCAR Operating & Capital Grant
With M.O.M. Osman (Equip.)
1978-1982
$136,100
Principal Applicant, FCAR (Grant & Equip.)
1983-1992
$222,700
1993-1996
$30,000/y
FCAR Actions Concertées
1988-1989
$45,000
1989-1992
$50,000/y
FCAR Actions Concertées (Hoa, S.V., Xiao X.R., Ngo A.D.) (International collaboration with Japan)
1994-1997
$17,000/y
FCAR Équipe
(Hoa, S.V., Blach, A.E., Xiao, X.R., Ngo, A.D.) (Composite structures and materials)
1993-1996
$32,000/y
(Hoa, S., Xiao, X., Ganesan, R., Ngo, D.) 1998-2001
$36,000/y
FRQNT (Higgins, A., Barthelat, F., Frost, D., Timofeev, E., Hoa, S.V.) (Simulation and testing
capability for orbital debris impact)
2011-2014
$64,500/y
FCAR Program for International Collaboration
1995-1997
$17,000/y
Ministry of Education & Science With S. Sankar, J. Svoboda, S.V. Hoa, R. Cheng, R. Bhat, T. Krepec,
Y. Stepanenko
1985-1990
$1,160,000
Ministère de l'Enseignement Supérieur et de la Science
Principal Applicant
1985-1988
$150,000/y
Ford Canada Ltd.
1979-1980
$7,000
Canadair Ltd.
1979-1980
$750
Imperial Oil Ltd.
1983-1986
$18,000
Spar Aerospace
1982-1998
$22,728
National Research Council Canada
1981
$14,300
42
November 2013
Suong Van HOA
Curriculum vitae

(Industrial Materials Research Inst.)
1986-1988
$97,000
NRC Contract (Joining of tubular composites)
1994-1996
$17,500/y
Department of National Defence
1984-1991
$312,189
C.P.F. Dualam Ltd. (Contracts) (Acoustic emission of composite pressure vessels and
characterization)
1995-1997-1980
$18,087
Royal Military College
1983-1990
$13,200
Voyageur Marine Construction
1983
$1,200
CAE Electronics Ltd.
1985
$11,975
Noranda Inc.
1986
$2,400
Comptank Inc.
1987-1989
$11,400
Les Transports Provost Inc.
1985-1988
$330,000
Pratt & Whitney Canada Inc.
1991-1994
$90,000
TANKCON FRP Inc. (Contracts) (Acoustic emission testing of highway tankers)
1994-1997
$40,000
DNL Ltd. (Contract) (Acoustic emission testing of bridge structures)
1997
$7,200
AVCORP Ltd. (Contract) (Design of composite air inlet)
1997
$10,000
Forest Engineering Research Institute of Canada (contract) (Development of composite pickets for
log trailers)
1995-1996
$12,000
Via Rail Ltd. (Contract) (Testing of banking cylinders)
1995-1996
$8,500
Canadian Department of Foreign Affairs (Hoa S.V., Xiao X.R., Ngo A.D., Vu-Khanh T., Lee S.,
Poursartip A., Lo, J.) (Canada-Japan workshop on Composites)
1996-1997
$35,600
Bombardier Services Division (Second Canada-Japan workshop on Composites)
1998
$500
MPB Ltd. and Canadian Space Agency 2005-2011
$132,000
Canadian Foundation for Innovation:
(Innovative Testing Facilities for Materials with X. Xiao, R. Ganesan) 1999
$280,000
Canadian Foundation for Innovation (Innovative Facilities for Research using Information
Technology - member of group for the University) 1999
$12,500,000
Canadian Foundation for Innovation (Infrastructure for the development and characterization of
polymer composites and nanocomposites)
2008
$2,300,000
Support from Gestion Valeo
2002-2004
$90,000
Composite rod for reinforcement of concrete
Instrumentation for resin shrinkage monitoring
Epoxy nanocomposites
NSERC Engage grant/Ffye
2010-2011
$25,000
NSERC Engage grant /Rocky Mountain Bikes 2012
$25,000
NSERC Industrial Chair on Automated Composites Manufacturing (with support from Bombardier
43
November 2013
Suong Van HOA
Curriculum vitae

Aerospace, Bell Helicopter Textron Canada Ltd., Emergia Aerospace, Delastek, and Composites
Atlantic, and Concordia University)
2012-2017
$3,200,000
NSERC CRD grant on “Helicopter flex beam flappability”, with collaborative support from Bell
Helicopter Textron, CRIAQ, MDEIE, Indian Institute of Science
2013-2016
$1,095,000
NSERC Tools and Instrument grant (PI M. Hojjati):
Laser Unit for Thermoplastic Composite
Manufacturing using Automated Fiber Placement”, 2013, $122,000.
FQRNT equipe grant (PI W.F. Xie) Collaboration placement de fibres automatisé (PFA) fabrication de
structures en composites, 2014-2017, $230,272.
PROJECT/THESIS SUPERVISION
Master theses in Progress
Visiting Ph.D students: 2
Doctoral theses finished 30
10
Doctoral theses in progress 10
Master theses finished
47
Post doc currently under supervision: 3
GRADUATE STUDENTS WHO HAVE GRADUATED
1. Elshakweer M., Master of Engineering, Fatigue life prediction under complex loading, 1981.
2. Kennedi L., Master of Applied Science, An experimental investigation of high contact ratio gear
tooth behavior, 1982.
3. Badruddin S., An improved profile of the railway wheel to minimize residual stresses after severe
drag braking, Master of Applied Science, 1982.
4. Robbins W., Master of Engineering, Damping of composite materials in relation to aircraft
interiors, 19844. Currently with Transport Canada.
5. Ishak W., Master of Engineering, Carbon fiber composites and environmental effect, 1985.
Currently with Bell Helicopter Textron Canada Ltd.
6. Shukry M., Master of Engineering, Buckling of glass reinforced filament wound pressure vessels
under hydrostatic external pressure, 1985.
7. Andreous M., Master of Engineering, Structural repair of composite materials, 1985.
8. Huang Q., Ph.D., Three dimensional composite finite elements for stress analysis of anisotropic
laminate structures, 1989.
9. Ngo A.D., Ph.D Effect of liquid absorption on the fatigue behavior of random fiber sheet
molding compounds, 1989. Currently Professor at the Department of Mechanical Engineering at
Ecole de Technologie Superieure.
10. Lucking W., Ph.D., Analysis of edge problems in statically loaded fiber reinforced laminated
plates by linear elastic theory, 1989. Currently Project Engineer of Being Aircraft.
11. Daoust J., Ph.D., Interlaminar stresses in tapered laminates, 1989. Current project engineer for
the software company making PATRAN.
12. Chen J., Master of Applied Science, Hygrothermal effect on the mechanical properties of
polyphenylene sulfide (PPS) composites, 1990. Currently Manager of Harris Corporation,
Shenzhen, China.
13. Smith C., Master of Applied Science, Utilization of PVDF sensors to determine impact damage
44
November 2013
Suong Van HOA
Curriculum vitae

in graphite/epoxy plates by acousto-ultrasonic technique, August 1992.
14. Molinari M., Master of Engineering, Fracture of composite materials, June 1992. Currently with
Transport Canada.
15. D’Arienzo V., Master of Engineering, Effect of environment on mechanical behavior of
composites, June 1992. Currently Technical Fellow at Bell Helicopter Textron Ltd.
16. Blach S., Master of Applied Science, Kinetics of vinyl ester resins, June 1994.
17. Mazumdar S.K., Ph.D, Automated manufacturing of composite components by thermoplastic
tape winding and filament winding, 1994. Currently Editor in chief, E-Composites news.
18. Han J., Ph.D Three dimensional multilayer composite finite element method for stress analysis of
composite laminates, 1994.
19. Hojjati M., Ph.D, Curing of thick thermoset composites: experiment, simulation and scaling,
1994. Currently Professor at Concordia University, Canada.
20. Dudley N., Master of Applied Science, Performance evaluation of filament wound tubes after
long term exposure to aggressive environment, June 1995.
21. Kim Y.S., Ph.D, Biaxial buckling of laminated composite plates, 1995. Currently Professor in
Mechanical Engineering, Pusan University, Korea.
22. Zhang S., Ph. D, co-supervised with Dr. R. Ganesan, Development of a hybrid knowledge based
system for condition monitoring and diagnosis of rotating machinery, 1995.
23. Wang Y., Master of Applied Science, co-supervised with Dr. M. Osman, Cutting behavior of
composite prepregs, June 1996.
24. Vankatesan S., Master of Applied Science, co-supervised with Dr. R. Ganesan, Finite element
analysis for eigen solution variability of non-self-adjoint mechanical systems with stochastic
parameters, 1996.
25. Beaudin S., Master of Applied Science, co-supervised with Dr. D. Cheeke, Surface acoustic
wave gas sensor using a SrFeO2.5+x thin film, 1996.
26. El-Karmalawy M., Ph.D, co-supervised with Dr. R. Ganesan, Fatigue damage characterization
and reliability evaluation for CFRP composites, 1997.
27. Chen J., Ph.D, co-supervised with Dr. C.K. Jen, In-situ cure monitoring and characterization of
graphite/epoxy composites using fiber optics and ultrasonics, 1998. Currently Research Officer
at National Research Council of Canada.
28. Feng W., Ph.D, Development of partial hybrid finite elements for 3-D global/local analysis of
laminated composite structures, 1998. Currently Vice Director, Institute of Mathematics and
Applied Mechanics, Shanghai University.
29. Balike M., Ph.D, co-supervised with Dr. S. Rakheja, Enhancement of crashworthiness in cartruck collisions using damped under-ride guard and composite crush elements, 1998. Currently
engineer at Ford Motor.
30. Naji, M., Ph.D, Theoretical and experimental investigation on the manufacturing of composite
structures with angle-bend, 1998. Currently professor at Jordan University of Science and
Technology.
31. Zhao J., Master of Applied Science, co-supervised with Dr. X.R. Xiao Evaluation of efficiency of
partial hybrid finite element analysis using composite laminates with crack, 1998. Currently
Ph.D. student at Concordia University, and engineer at ANRAD, Montreal.
32. Yong Y., Master of Applied Science, Characterization of braided composites, Jan. 1999.
45
November 2013
Suong Van HOA
Curriculum vitae

Currently engineer at CAE Ltd. in Montreal.
33. Dilunovic M., Master of Applied Science, co-supervised with Dr. X.R. Xiao, Development of
composite material with special dielectric properties, Feb. 1999.
34. Al-Omari A., Master of Applied Science, Vacuum assisted resin transfer molding of composites,
April 1999.
35. Rohrauer G., Ph.D, Design of very high pressure composite pressure vessels, August 1999.
Currently Associate Professor at Department of Mechanical Engineering at Ontario University
Institute of Technology.
36. Zhang C. Ph.D, co-supervised with Dr. R. Ganesan, Stochastic model for delamination of
composite laminates, June 2001. Currently engineer at Pratt & Whitney Canada Ltd.
37. Kan He, Ph.D, co-supervised with Dr. R. Ganesan, Interlaminar stresses and fracture behavior
in thickness-tapered composite laminates, February 2002. Currently composite engineer at
Chrysler Ltd in Detroit.
38. Dafu Shen, Master of Engineering, co-supervised with Dr. M.T. Ton-That, Epoxy
nanocomposites, August 2002.
39. Yu Xin, M.A.Sc., Stress analysis of composite reinforcing rod in concrete, 2003.
40. Lei Shenggong, M.A.Sc., co-supervised with Dr. M.T. Ton-That, Polypropylene nanocomposites
using different clays and coupling agents, 2003.
41. Qi Zhao, Ph.D., Finite element development for triax composites, 2004. Current project engineer
at Shanghai Aircraft company, China.
42. Jiang Yujin, M.A.Sc., A novel method for the manufacturing of thick glass/polyestser
composites, 2004. Currently process engineer at Shanghai Aircraft Company, China.
43. Wang H., M.A.Sc., cosupervised with Dr. P. Wood-Adams, The study of clay/epoxy
nanocomposites: Their synthesis, microstructures, and properties, 2004. Currently composites
lab manager at Concordia University.
44. Xu D., Ph.D, co-supervised with Dr. R Ganesan, Buckling analysis of triaxial woven composite
structures, 2004.
45. Shaikh H., M. Eng. Effect of addition of nanoclay on the adhesive properties of a common epoxy
adhesive, 2004.
46. Pathwary M., M.Eng., Characteristics of void formation in RTM process, 2004.
47. Liu W., Ph.D, cosupervised with M. Pugh, “Epoxy/clay nanocomposites for structural
applications”, 2005. Currently Vice-chief engineer responsible for composites, Shanghai aircraft
company, Shanghai, China.
48. Hassan S., M.A.Sc., “Characterisation and mechanical properties of thermoplastic composites”,
April 2005. Currently research engineer, Bombardier Aerospace Ltd.
49. Lebel L., M.A.Sc., “Manufacturing of braided thermoplastic composites with commingled
fibers”, May 2005. Currently project engineer at Bombardier Aerospace.
50. Yuan Xu, M.A.Sc., “Composite materials with carbon fibers and epoxy nanocomposites”,
October 2006.
51. Ahmed S., M. Eng. “Formation of void during RTM molding of composites”, Master of
Engineering, 2005.
52. Girish Thatte “Development and characterization of self-healing epoxy systems for space
applications”, M.A.Sc. December 2006.
46
November 2013
Suong Van HOA
Curriculum vitae

53. Shilian Hu “Surface finish analysis of composite automotive panels”, Ph.D, February 2007.
54. Ngo Tri Dung, “Understanding the effect of adding nanoclays into epoxies” Ph.D,
June 2007. Currently research officer at National Research Council of Canada, Boucherville,
Quebec.
55. Derisi J., “Mechanical behavior of tubes made of thermoplastic composites for helicopter
applications”, Ph.D 2008. Currently research engineer in composites at Bombardier Aerospace.
56. Ashraf Fathy, “Development of polymer materials with strong thermal insulation”, Ph.D 2009.
Currently with the research department of the Egyptian military.
57. Spitsina Svetlana, cosupervised with M. Kahrizi, “Packaging of fiber optical sensor for
composite strain measurement” M.A.Sc., July 2009.
58. Reza Nofar, cosupervised with M. Pugh, “Use of carbon nanotubes to detect failure in
glass/epoxycomposites”, M.A.Sc., April 2008. Currently Post Doc at Ecole Polytechnique
Montreal.
59. Ramak Motanedi, cosupervised with N. Sivakumar, “Shearography for detecting defects in
composites”, M.A.Sc., September 2008. Currently Ph.D student at McGill University.
60. Rajpal Chahal, “Shear stress distribution in thin walled tube with polygonal cross section”,
M.A.Sc., June 2008. Currently engineer at Bombardier Aerospace.
61. Mossab El Tahan, M.A.Sc., cosupervised with Khaled Galal, “Thermoplastic composite rods for
the reinforcement of concrete”, September 2009.
62. Xudong Liu, cosupervised with Minguan Chen, “Cost analysis of manufacturing of composite
wing box”, M.A.Sc., August 2009.
63. Ahmed Kabir, “Effect of clay addition on damping and fatigue properties of glass/epoxy
composites”, M.A.Sc, 2010.
64. Hesna Zamal, “Monitoring fatigue life of composites using carbon nanotubes”, M.A.Sc., 2010.
65. Khan S., co-supervised with Wen-fang Xie, “Thermal control system design for automated fiber
placement process”, 2011. Currently engineer at Rolls Royce Canada Ltd.
66. Hossein Sinaei, “.Effect of addition of carbon nanotubes on thermal conductivity of epoxies”,
M.Eng., 2011. Currently Ph.D student at University of Alberta.
67. Mohamed Mohiuddin, Effect of pressure and temperature on the electrical conductivity of
polyetheretherketone”, Ph. D, 2012.
68. Farjad Shadmehri, “Mechanical behavior of thermoplastic composite cones made by automated
fiber placement process”, Ph.D, 2012. Currently industrial post doc at Bombardier Aerospace
and Concordia.
69. Xiao Cai, “Effect of laps and gaps on the mechanical properties of thermoplastic composites
made by automated fiber placement process”, M.A.Sc., 2012. Currently pursuing joint Ph.D at
Concordia and Bombardier Aerospace.
70. Roham Mactabi, “Monitoring fatigue degradation of adhesive bonded joints using carbon
nanotubes” MASc., 2012.
71. Pooya Rowghanian, M.A.Sc., “Optimization of the temperature distribution in thick composites
during manufacturing using carbon nanotubes”, MASc., 2012-.
72. Ruoshi Tong, “Cost analysis for the manufacturing of L shape composite pieces using autoclave
and out-of-autoclave composites”. M.A.Sc. 2012.
73. Mohamed El-Geuchy, Ph.D., “Stiffness behavior of composite tubes”, April 2013. Currently
47
November 2013
Suong Van HOA
Curriculum vitae

research officer with the Egyptian military.
74. Sina Chaeichian, Ph.D, cosupervised with P. Wood Adams, “A novel
thermoplastic/clay/thermoset system for toughening of unsaturated polyester”, October 2013.
75. Kulbir Singh Madhok, M.A.Sc., “Comparative characterization of out-of-autoclave materials by
automated fiber placement and hand lay up processes”, November 2013.
76. Alexandar Grujicic, M.A.Sc.. “Fatigue of carbon/epoxy modified with carbon nanotubes”, April
2014.
77. Ali Naghashpour, Ph.D, “Damage detection in composite structures using carbon nanotubes”,
April 2014-.
GRADUATE STUDENTS AND POST DOCS CURRENTLY SUPERVISED
1. Asgar Khan, Ph.D, “Optimization of microcapsules for the self-healing of composites for space
applications”, 2009-.
2. Xiao Cai, Ph.D., “Optimization of aircraft structures made of composite materials” from 20123. Mohamed Selmy, Ph.D, “Effect of nanoclay addition on the fatigue behavior of thick tapered
composite laminates”, from 2010-.
4. Alireza Gorjipoor, Ph.D,, co supervised with R. Ganesan, “Stress analysis and deformation of
thick composite laminates subjected to bending loading””, from 20135. Jeffrey Simpson, M.A.Sc. “New method for making holes using automated fiber placement
process”, from 2010-.
6. Hossein Ghayoor, M.A.Sc., “Understanding residual stresses and deformation in flat plate
thermoplastic composites made by automated fiber placement process”, 20117. Dina Alizadeh, M.A.Sc., co supervised with W.F. Xie “Use of thermal imaging for the fatigue
study in thick composite laminates”, from 2013.
8. Hoang Minh Duc, M.A.Sc.,” Effect of process conditions on the manufacturing of thermoplastic
composite plates using automated fiber placement process”, from 2012.
9. Hamidreza Yazdani, Ph.D, “Stress analysis of curved composite tubes”, from 2013.
10. Song Chonghui, M.A.Sc., “Development of manufacturing procedure for curved composite tubes
for helicopter landing gear application”, from 2012.
11. Sima Nabivizadeh, M.A.Sc., “Behavior of electrically conductive adhesives subjected to high
electrical current”, from 2012.
12. Xiangming Zhang, Ph.D., “Development of algorithm for the automated fiber placement of
complex shapes”, from 2011.
13. Wendy Xiong, M.A.Sc., “Effect of addition of nanocrystalline cellulose on the properties of
thermoplastics”, from 2012.
14. Amir Bahram Kaganj, Ph.D, co supervised with M. Hojjati, “Thermo stamping of thermoplastic
composites”, from 2013.
15. Junfei Li, Ph.D, “Effect of fiber steering in composite laminates”, from September 2013.
16. Sara Mamani, MASc., “Residual stresses due to curing of thick laminates”, from September
2014.
17. Reza Ahani, MASc, co supervised with M. Hojjati, “Stress analysis of Z pinned laminates”, from
September 2014.
48
November 2013
Suong Van HOA
Curriculum vitae

18. Yasser Elsherbini, Ph.D, “Fatigue of laminates with laps and gaps”, from September 2013.
19. Hamid Hanini, Ph.D, “Fatigue crack initiation in thick composites”, from September 2014.
20. Alina Saha, MASc,, co-supervised with W.F. Xie “Control system for AFP process”, from
September 2014.
21. Anqi Dong, visiting PhD student from Behang university, from 2013.
22. Xianyang Zhang, visiting Ph.D student from Nanjing University of Aeronautics and
Astronautics, from September 2014.
23. Farjad Shadmehri, Post Doc. “Development of non-destructive testing method for composites
made by automated fiber placement process”, from 2012.
24. Mohamed Rouhi, Post Doc., “Optimization of aircraft structures using fiber steering”, from
2012.
25. Ali Naghashpour, Post Doc, “Technique for defect detection, location and quantification in
composite structures”, from April 2014
49
November 2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement