FujiFilm XP-170 Digital Camera User Manual

BL01735-200
DIGITAL CAMERA
FINEPIX XP170
FINEPIX XP150/XP160
FINEPIX XP100/XP110
Owner’s Manual
Thank you for your purchase
of this product. This manual
describes how to use your
FUJIFILM digital camera and the
supplied software. Be sure that
you have read and understood
its contents and the warnings in
“For Your Safety” (P ii) before using the camera.
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
EN
Before You Begin
First Steps
Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Menus
Technical Notes
Troubleshooting
Appendix
For Your Safety
IMPORTANT SAFETY INSTRUCTIONS
• Read Instructions: All the safety and operating instructions should be read before the
appliance is operated.
• Retain Instructions: The safety and operating
instructions should be retained for future
reference.
• Heed Warnings: All warnings on the appliance and in the operating instructions
should be adhered to.
• Follow Instructions: All operating and use
instructions should be followed.
Installation
Power Sources: This video product should be
operated only from the type of power source
indicated on the marking label. If you are
not sure of the type of power supply to your
home, consult your appliance dealer or local
power company. For video products intended to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization: This video product
is equipped with a polarized alternatingcurrent line plug (a plug having one blade
wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
ii
Alternate Warnings: This video product is
equipped with a three-wire grounding-type
plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type
power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding type plug.
Overloading: Do not overload wall outlets and
extension cords as this can result in a risk of
fire or electric shock.
Power-Cord Protection: Power-supply cords
should be routed so that they are not likely
to be walked on or pinched by items placed
upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
Accessories: Do not place this video product
on an unstable cart, stand, tripod, bracket, or
table. The video product may fall, causing
serious injury to a child or adult, and serious
damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with
the video product. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
Ventilation: Slots and openings in the cabinet
are provided for ventilation, to ensure reliable
operation of the video product and to protect it from overheating, and these openings
must not be blocked or covered. The openings should never be blocked by placing the
video product on a bed, sofa, rug, or other An appliance and cart
similar surface.
combination should
This video product should not be placed in a be moved with care.
built-in installation such as a bookcase or rack Quick stops, excesunless proper ventilation is provided or the sive force, and uneven
manufacturer’s instructions have been ad- surfaces may cause
hered to. This video product should never be the appliance and cart
placed near or over a radiator or heat register. combination to overturn.
Attachments: Do not use attachments not
recommended by the video product manufacturer as they may cause hazards.
Water and Moisture: Do not use this video
product near water—for example, near a bath
tub, wash bowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool,
and the like (excluding waterproof products).
For Your Safety
Antennas
Outdoor Antenna Grounding: If an outside
antenna or cable system is connected to the
video product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and builtup static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides
information with respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Ground Clamp
Antenna Lead
in Wire
If the video product does not operate normally follow the operating instructions. Adjust only those controls that are covered by
the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
Object and Liquid Entry: Never push objects
by a qualified technician to restore the video
of any kind into this video product through
product to its normal operation.
openings as they may touch dangerous voltage points or short out parts that could result When the video product exhibits a distinct
in a fire or electric shock. Never spill liquid change in performance—this indicates a
of any kind on the video product (excluding need for service.
waterproof products).
Replacement Parts: When replacement parts
Use
Cleaning: Unplug this video product from the
wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
Lightning: For added protection for this video
product receiver during a lightning storm, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power-line surges.
Service
Servicing: Do not attempt to service this video
product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified
Ground Clamps
Grounding service personnel.
Conductors Damage Requiring Service: Unplug this video
Power Service Grounding
(NEC SECTION product from the wall outlet and refer servicElectrode System (NEC ART
810-21) ing to qualified service personnel under the
250. PART H)
following conditions:
Power Lines: An outside antenna system • When the power-supply cord or plug is
should not be located in the vicinity of overdamaged.
head power lines or other electric light or • If liquid has been spilled, or objects have
power circuits, or where it can fall into such
fallen into the video product.
power lines or circuits. When installing an • If the video product has been exposed to
outside antenna system, extreme care should
rain or water (excluding waterproof prodbe taken to keep from touching such power
ucts).
lines or circuits as contact with them might • If the video product has been dropped or
be fatal.
the cabinet has been damaged.
Electric Service
Equipment
Antenna
Discharge Unit
(NEC SECTION
810-20)
are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or
other hazards.
Safety Check: Upon completion of any service
or repairs to this video product, ask the service technician to perform safety checks to
determine that the video product is in proper
operating condition.
iii
For Your Safety
Be sure to read these notes before use
WARNING
Safety Notes
• Make sure that you use your camera correctly. Read these safety
notes and your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
About the Icons
The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incorrectly
as a result.
WARNING
CAUTION
This icon indicates that death or serious injury can result if the
information is ignored.
This icon indicates that personal injury or material damage can
result if the information is ignored.
The icons shown below are used to indicate the nature of the instructions which are to be observed.
Triangular icons tell you that this information requires attention (“Important”).
Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark indicate an action that
must be performed (“Required”).
WARNING
Unplug from
power socket
iv
If a problem arises, turn the camera off, remove the battery, and
disconnect and unplug the AC power adapter. Continued use of
the camera when it is emitting smoke, is emitting any unusual
odor, or is in any other abnormal state can cause a fire or electric shock. Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter the camera. If water
or foreign objects get inside the camera, turn the camera off,
remove the battery, and disconnect and unplug the AC power
adapter. Continued use of the camera can cause a fire or electric shock. Contact your FUJIFILM dealer.
Do not use in
the bathroom or
shower
Do not
disassemble
Do not touch
internal parts
Do not use the camera in the bathroom or shower (excluding waterproof products). This can cause a fire or electric shock.
Never attempt to change or take apart the camera (never open
the case). Failure to observe this precaution can cause fire or
electric shock.
Should the case break open as the result of a fall or other accident,
do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the
damaged parts. Remove the battery immediately, taking care
to avoid injury or electric shock, and take the product to the
point of purchase for consultation.
Do not change, heat or unduly twist or pull the connection cord and
do not place heavy objects on the connection cord. These actions
could damage the cord and cause a fire or electric shock. If the
cord is damaged, contact your FUJIFILM dealer.
Do not place the camera on an unstable surface. This can cause the
camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion. Do not use the
camera while you are walking or driving a vehicle. This can result in you falling down or being involved in a traffic accident.
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from
the lightning discharge.
Do not use the battery except as specified. Load the battery as
shown by the indicator.
Do not heat, change or take apart the battery. Do not drop or subject
the battery to impacts. Do not store the battery with metallic products. Any of these actions can cause the battery to burst or leak
and cause fire or injury as a result.
Use only the battery or AC power adapters specified for use with this
camera. Do not use voltages other than the power supply voltage
shown. The use of other power sources can cause a fire.
If the battery leaks and fluid gets in contact with your eyes, skin or
clothing, flush the affected area with clean water and seek medical
attention or call an emergency number right away.
For Your Safety
WARNING
CAUTION
Do not use the charger to charge batteries other than those specified here. The supplied battery charger is for use only with the
type of battery supplied with the camera. Using the charger to
charge conventional batteries or other types of rechargeable
batteries can cause the battery to leak fluid, overheat or burst.
Keep out of the reach of small children. This product could cause
injury in the hands of a child.
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
Do not move the camera while the AC power adapter is still connected. Do not pull on the connection cord to disconnect the AC power
adapter. This can damage the power cord or cables and cause
a fire or electric shock.
Do not use the AC power adapter when the plug is damaged or the
plug socket connection is loose. This could cause a fire or electric
shock.
Do not cover or wrap the camera or the AC power adapter in a cloth
or blanket. This can cause heat to build up and distort the casing or cause a fire.
When you are cleaning the camera or you do not plan to use the
camera for an extended period, remove the battery and disconnect
and unplug the AC power adapter. Failure to do so can cause a
fire or electric shock.
Do not place heavy objects on the camera. This can cause the
heavy object to tip over or fall and cause injury.
Do not use in the presence of flammable objects, explosive gases,
or dust.
When carrying the battery, install it in a digital camera or keep it
in the hard case. When storing the battery, keep it in the hard case.
When discarding, cover the battery terminals with insulation tape.
Contact with other metallic objects or batteries could cause
the battery to ignite or burst.
Keep memory cards out of the reach of small children. Because
memory cards are small, they can be swallowed by children.
Be sure to store memory cards out of the reach of small children. If a child swallows a memory card, seek medical attention or call an emergency number.
Turn the camera off in crowds. The camera emits radio-frequency
radiation that may interfere with pacemakers.
Turn the camera off in the vicinity of automatic doors, public address
systems, and other automatically controlled devices. The camera
emits radio-frequency radiation that may cause these devices
to malfunction.
Keep the camera at least 22 cm away from people wearing pacemakers. The camera emits radio-frequency radiation that may
interfere with pacemakers.
CAUTION
Do not use this camera in locations affected by oil fumes or steams.
This can cause a fire or electric shock.
Unplug from
power socket
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause
a fire.
Using a flash too close to a person’s eyes may temporarily affect the
eyesight. Take particular care when photographing infants and
young children.
When a memory card is removed, the card could come out of the slot
too quickly. Use your finger to hold it and gently release the card.
Injury could result to those struck by the ejected card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric
shock. Contact your FUJIFILM dealer to request internal cleaning every two years. Please note that this service is not free
of charge.
Do not use this camera in locations affected by humidity or dust
(excluding waterproof products). This can cause a fire or electric shock.
Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed
vehicle or in direct sunlight. This can cause a fire.
v
For Your Safety
■ Charging the Battery
Charge the battery in the supplied battery
charger. Charging times will increase at ambient temperatures below +10 °C (+50 °F) or
above +35 °C (+95 °F). Do not attempt to
The following describes the proper use of charge the battery at temperatures above
batteries and how to prolong their life. Incor- 40 °C (+104 °F); at temperatures below 0 °C
rect use can shorten battery life or cause leak- (+32 °F), the battery will not charge.
age, overheating, fire, or explosion.
Do not attempt to recharge a fully charged
Li-ion Batteries
battery. The battery does not however need
Read this section if your camera uses a to be fully discharged before charging.
rechargeable Li-ion battery.
The battery may be warm to the touch immeThe battery is not charged at shipment. diately after charging or use. This is normal.
Charge the battery before use. Keep the bat■ Battery Life
tery in its case when not in use.
At normal temperatures, the battery can be
■ Notes on the Battery
recharged about 300 times. A noticeable deThe battery gradually loses its charge when crease in the length of time the battery will
not in use. Charge the battery one or two hold a charge indicates that it has reached
days before use.
the end of its service life and should be reBattery life can be extended by turning the placed.
The Battery and Power Supply
Note: Check the type of battery used in
your camera and read the appropriate
sections.
■ Cautions: Handling the Battery
• Do not transport or store with metal objects
such as necklaces or hairpins.
• Do not expose to flame or heat.
• Do not disassemble or modify.
• Use with designated chargers only.
• Do not drop or subject to strong physical
shocks.
• Do not expose to water.
• Keep the terminals clean.
• The battery and camera body may become
warm to the touch after extended use. This
is normal.
AA Alkaline/Rechargeable NiMH Batteries
Read this section if your camera uses AA
alkaline or rechargeable AA NiMH batteries. Information on compatible battery
types may be found elsewhere in the camera
manual.
■ Cautions: Handling the Batteries
• Do not expose to water, flame, or heat, or
■ Storage
store in warm or humid conditions.
Battery capacity decreases at low tempera- Performance may be impaired if the battery is • Do not transport or store with metal objects
such as necklaces or hairpins.
tures; a depleted battery may not function at left unused for extended periods when fully
when cold. Keep a fully charged spare bat- charged. Run the battery flat before storing it. • Do not disassemble or modify the batteries
or battery casing.
tery in a warm place and exchange as nec- If the camera will not be used for an extended
essary, or keep the battery in your pocket or period, remove the battery and store it in a • Do not subject to strong physical shocks.
other warm place and insert it in the camera dry place with an ambient temperature of • Do not use batteries that are leaking, deformed, or discolored.
only when shooting. Do not place the bat- from +15 °C to +25 °C (+59 °F to +77 °F). Do
tery in direct contact with hand warmers or not store in locations exposed to extremes of • Keep out of reach of infants and small children.
other heating devices.
temperature.
• Insert in the correct orientation.
camera off when not in use.
vi
For Your Safety
• Do not mix old and new batteries, batteries
with different charge levels, or batteries of
different types.
• If the camera will not be used for an extended period, remove the batteries. Note that
the camera clock will be reset.
• The batteries may be warm to the touch
immediately after use. Turn the camera
off and allow the batteries to cool before
handling.
• Battery capacity tends to decrease at low
temperatures. Keep spare batteries in a
pocket or other warm place and exchange
as necessary. Cold batteries may recover
some of their charge when warmed.
• Fingerprints and other stains on the battery
terminals can impair battery performance.
Thoroughly clean the terminals with a
soft, dry cloth before inserting them in the
camera.
■ NiMH Batteries
The capacity of Ni-MH batteries may be
temporarily reduced when new, after long
periods of disuse, or if they are repeatedly
recharged before being fully discharged. This
is normal and does not indicate a malfunction. Capacity can be increased by repeatedly
discharging the batteries using the discharge
option in the camera setup menu and recharging them using a battery charger.
Q CAUTION: Do not use the discharge option
with alkaline batteries.
The camera draws a small amount of current
even when off. Ni-MH batteries that have
been left in the camera for an extended period may be drawn down to the point that
they no longer hold a charge. Battery performance may also drop if the batteries are run
down in a device such as a flashlight. Use the
discharge option in the camera setup menu
If the batteries leak, clean the battery to discharge Ni-MH batteries. Batteries that
compartment thoroughly before in- no longer hold a charge even after repeatserting new batteries.
edly being discharged and recharged have
reached the end of their service life and must
If fluid from the battery comes into
be replaced.
contact with skin or clothing, flush
the affected area with water. If fluid Ni-MH batteries can be recharged in a batenters your eyes, immediately flush the tery charger (sold separately). Batteries may
affected area with water and seek become warm to the touch after charging.
medical attention. Do not rub your eyes. Refer to the instructions provided with the
Failure to observe this precaution could charger for more information. Use the charresult in permanent visual impairment. ger with compatible batteries only.
AC Power Adapters (Available Separately)
This section applies to all camera models.
Use only FUJIFILM AC power adapters designated for use with this camera. Other adapters could damage the camera.
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected
to the camera.
• Turn the camera off before disconnecting
the adapter. Disconnect the adapter by the
plug, not the cable.
• Do not use with other devices.
• Do not disassemble.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the
touch during use. This is normal.
• If the adapter causes radio interference,
reorient or relocate the receiving antenna.
Ni-MH batteries gradually lose their charge
when not in use.
■ Disposal
Dispose of used batteries in accord with local
regulations.
vii
For Your Safety
Using the Camera
Do not aim the camera at extremely bright
light sources, such as the sun in a cloudless
sky. Failure to observe this precaution could
damage the camera image sensor.
Take Test Shots
Before taking photographs on important
occasions (such as at weddings or before
taking the camera on a trip), take a test shot
and view the result in the LCD monitor to ensure that the camera is functioning normally.
FUJIFILM Corporation can not accept liability
for damages or lost profits incurred as a result
of product malfunction.
Notes on Copyright
Unless intended solely for personal use, images recorded using your digital camera system
cannot be used in ways that infringe copyright laws without the consent of the owner.
Note that some restrictions apply to the
photographing of stage performances, entertainments, and exhibits, even when intended
purely for personal use. Users are also asked
to note that the transfer of memory cards
containing images or data protected under
copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Handling
To ensure that images are recorded correctly,
do not subject the camera to impact or physical shocks while images are being recorded.
viii
Liquid Crystal
In the event that the LCD monitor is damaged, care should be taken to avoid contact
with liquid crystal. Take the urgent action
indicated should any of the following situations arise:
• If liquid crystal comes in contact with your skin,
clean the area with a cloth and then wash
thoroughly with soap and running water.
• If liquid crystal enters your eyes, flush the affected eye with clean water for at least 15
minutes and then seek medical assistance.
• If liquid crystal is swallowed, rinse your
mouth thoroughly with water. Drink large
quantities of water and induce vomiting,
then seek medical assistance.
Electrical Interference
This camera may interfere with hospital or
aviation equipment. Consult with hospital
or airline staff before using the camera in a
hospital or on an aircraft.
Color Television Systems
NTSC (National Television System Committee)
is a color television telecasting specification
adopted mainly in the U.S.A., Canada, and
Japan. PAL (Phases Alternation by Line) is
a color television system adopted mainly in
European countries and China.
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera file
format in which information stored with phoAlthough the display is manufactured using tographs is used for optimal color reproducextremely high-precision technology, it may tion during printing.
contain pixels that are always lit or that do not
IMPORTANT NOTICE:
light. This is not a malfunction, and images reRead Before Using the Software
corded with the product are unaffected.
Direct or indirect export, in whole or in part,
of licensed software without the permission
Trademark Information
xD-Picture Card and E are trademarks of the applicable governing bodies is proof FUJIFILM Corporation. The typefaces in- hibited.
cluded herein are solely developed by DynaComware Taiwan Inc. Macintosh, QuickTime,
and Mac OS are trademarks of Apple Inc. in
the U.S.A. and other countries. Windows 7,
Windows Vista, and the Windows logo are
trademarks of the Microsoft group of companies. Adobe and Adobe Reader are either
trademarks or registered trademarks of Adobe Systems Incorporated in the U.S.A. and/
or other countries. The SDHC and SDXC logos
are trademarks of SD-3C, LLC. The HDMI logo
is a trademark. YouTube is a trademark of
Google Inc. All other trade names mentioned
in this manual are the trademarks or registered trademarks of their respective owners.
For Your Safety
IMPORTANT: Read this section before using the toponyms includ- Disclaimer of Warranty: FUJIFILM Corporation AND ITS LICENSORS
ed in this product.
(INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY
WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE,
Toponym Data License Agreement
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONPersonal Use Only. You agree to use this Data together with this digital INFRINGEMENT. Some States, Territories and Countries do not allow
camera for the solely personal, non-commercial purposes for which certain warranty exclusions, so to that extent the above exclusion may
you were licensed, and not for service bureau, time-sharing or other not apply to you.
similar purposes. Accordingly, but subject to the restrictions set forth
in the following paragraphs, you may copy this Data only as necessary Disclaimer of Liability: FUJIFILM Corporation AND ITS LICENSORS (INfor your personal use to (i) view it, and (ii) save it, provided that you do CLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO
not remove any copyright notices that appear and do not modify the YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE
Data in any way. You agree not to otherwise reproduce, copy, modify, OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION
decompile, disassemble or reverse engineer any portion of this Data, ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT,
and may not transfer or distribute it in any form, for any purpose, ex- WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFORcept to the extent permitted by mandatory laws. Multi-disc sets may MATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR
only be transferred or sold as a complete set as provided by FUJIFILM SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR
Corporation and not as a subset thereof.
INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMARestrictions. Except where you have been specifically licensed to do TION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER
so by FUJIFILM Corporation, and without limiting the preceding para- IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY,
graph, you may not (a) use this Data with any products, systems, or EVEN IF FUJIFILM Corporation OR ITS LICENSORS HAVE BEEN ADVISED
applications installed or otherwise connected to or in communication OF THE POSSIBILITY OF SUCH DAMAGES. Some States, Territories and
with vehicles, capable of vehicle navigation, positioning, dispatch, real Countries do not allow certain liability exclusions or damages limitatime route guidance, fleet management or similar applications; or tions, so to that extent the above may not apply to you.
(b) with or in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including Export Control. You agree not to export from anywhere any part of the
without limitation cellular phones, palmtop and handheld computers, Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applipagers, and personal digital assistants or PDAs.
cable export laws, rules and regulations.
Warning. The Data may contain inaccurate or incomplete information
due to the passage of time, changing circumstances, sources used Entire Agreement. These terms and conditions constitute the entire
and the nature of collecting comprehensive geographic data, any of agreement between FUJIFILM Corporation (and its licensors, including their licensors and suppliers) and you pertaining to the subject
which may lead to incorrect results.
matter hereof, and supersedes in their entirety any and all written or
No Warranty. This Data is provided to you “as is,” and you agree to use oral agreements previously existing between us with respect to such
it at your own risk. FUJIFILM Corporation and its licensors (and their subject matter.
licensors and suppliers) make no guarantees, representations or warranties of any kind, express or implied, arising by law or otherwise,
including but not limited to, content, quality, accuracy, completeness,
effectiveness, reliability, fitness for a particular purpose, usefulness,
use or results to be obtained from this Data, or that the Data or server
will be uninterrupted or error-free.
ix
For Your Safety
Governing Law. The above terms and conditions shall be governed by
the laws of the State of Illinois, Netherlands, without giving effect to
(i) its conflict of laws provisions, or (ii) the United Nations Convention
for Contracts for the International Sale of Goods, which is explicitly
excluded. You agree to submit to the jurisdiction of the State of Illinois,
The Netherlands for any and all disputes, claims and actions arising
from or in connection with the Data provided to you hereunder.
Geodetics. The geodetic system used by this device to record latitude
and longitude is WGS 84.
Copyright. The map data included in this device are protected under
copyright law and except for personal use may not be employed
without the permission of the copyright holder.
Navigation. This device can not be used for purposes of navigation.
Licensed Software Copyright Holders
© 2010 NAVTEQ All rights reserved.
This service uses POI (Points Of Interest) of ZENRIN CO., LTD. “POWERED BY
ZENRIN” is a trademark of ZENRIN CO.,
LTD. © 2010 ZENRIN CO., LTD. All rights
reserved.
© Her Majesty the Queen in Right of Canada, © Queen’s Printer for
Ontario, © Canada Post Corporation, GeoBase®, © Department of
Natural Resources Canada, ZIP+4®, © United States Postal Service®
2010. the USPS®.
x
Australia
Austria
Copyright. Based on data provided under
license from PSMA Australia Limited
(www.psma.com.au).
“© Bundesamt für Eich- und Vermessungswesen”
“© EuroGeographics”
Croatia, Cyprus,
Estonia, Latvia,
Lithuania, Moldova,
Poland, Slovenia and/
or Ukraine
France
The following notice must appear on all
copies of the Data, and may also appear
on packaging: “source: © IGN France – BD
TOPO®”
Germany
“Die Grundlagendaten wurden mit
Genehmigung der zuständigen Behörden
entnommen” or “Die Grundlagendaten
wurden mit Genehmigung der zustaendigen Behoerden entnommen.”
Great Britain
“Based upon Crown Copyright material.”
Greece
“Copyright Geomatics Ltd.”
Hungary
“Copyright © 2003; Top-Map Ltd.”
Italy
“La Banca Dati Italiana è stata prodotta
usando quale riferimento anche cartografia
numerica ed al tratto prodotta e fornita
dalla Regione Toscana.”
Norway
“Copyright © 2000; Norwegian Mapping
Authority”
Portugal
“Source: IgeoE – Portugal”
Spain
“Información geográfica propiedad del
CNIG”
Sweden
“Based upon electronic data Ó National
Land Survey Sweden.”
Switzerland
“Topografische Grundlage: Ó Bundesamt für
Landestopographie.”
For Your Safety
■ Governing Law
POI information in Japan: The above terms and conditions shall be
governed by the laws of Japan, without giving effect to (i) its conflict
of laws provisions, or (ii) the United Nations Convention for Contracts
for the International Sale of Goods, which is explicitly excluded. You
agree to submit to the exclusive jurisdiction of the Tokyo District Court
in the first instance for any and all disputes, claims and actions arising
from or in connection with the Data provided to you hereunder.
POI information outside Japan: The above terms and conditions shall be
governed by the laws of the State of Illinois, without giving effect to
(i) its conflict of laws provisions, or (ii) the United Nations Convention
for Contracts for the International Sale of Goods, which is explicitly
excluded. You agree to submit to the jurisdiction of the State of Illinois
for any and all disputes, claims and actions arising from or in connection with the Data provided to you hereunder.
Government End Users: If the Data is being acquired by or on behalf of
the United States government or any other entity seeking or applying rights similar to those customarily claimed by the United States
government, this Data is a “commercial item” as that term is defined at
48 C.F.R. (“FAR”) 2.101, is licensed in accordance with these End-User
Terms, and each copy of Data delivered or otherwise furnished shall
be marked and embedded as appropriate with the following “Notice
of Use,” and shall be treated in accordance with such Notice:
NOTICE OF USE
CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: NAVTEQ
CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 425 West Randolph
Street, Chicago, Illinois 60606
This Data is a commercial item as defined in FAR 2.101 and is subject
to these End-User Terms under which this Data was provided.
© 2010 NAVTEQ – All rights reserved.
If the Contracting Officer, federal government agency, or any federal
official refuses to use the legend provided herein, the Contracting
Officer, federal government agency, or any federal official must notify
NAVTEQ prior to seeking additional or alternative rights in the Data.
xi
About This Manual
Before using the camera, read this manual and the warnings in “For Your Safety” (P ii). For information on specific topics, consult the sources below.
Table of Contents ...........................P
........................... P xvi
The “Table of Contents” gives an
overview of the entire manual. The
principal camera operations are listed here.
Troubleshooting .......................... P 103
Having a specific problem with the
camera? Find the answer here.
Warning Messages and Displays ... P 110
Find out what’s behind that flashing
icon or error message in the display.
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and
SDXC memory cards (P 14), referred to in this manual as “memory cards.”
xii
Frequently-Used Buttons
■ Deleting Pictures
y To delete a picture, display it full frame
and press the selector up (b).
■ Taking Pictures During Playback
y To return instantly to shooting mode,
press the shutter button halfway.
Shoot
View
■ Turning the Camera on in
Playback Mode
y When the camera is
off, playback can be
started by pressing the
a button for about a
second.
■ Silent Mode
y Press and hold the DISP/
BACK button to disable
camera lights and
sounds.
xiii
Product Features and Precautions for Use
■ Water, Dust, and Shock Resistance
Q The camera complies with JIS Class 8 water resistance and JIS Class 6 (IP68) dust resistance
standards, and has passed FUJIFILM drop tests (drop height: 2.0 m/6.5 ft.; impact surface: plywood, thickness 5 cm/2.0 in.) compliant with MIL-STD 810F Method 516.5: Shock. These results
were obtained through in-house testing and are not a blanket guarantee of water resistance
or invulnerability to damage or destruction. The accessories supplied with the camera are not
water resistant.
■ Before Use
Q The front surface of the camera lens is protected by a sheet of glass. Foreign matter on the
glass will appear in photographs; keep the glass clean at all times.
Q Be sure that the battery-chamber is fully latched. The presence of water, mud, or sand in the
camera could cause malfunction.
Q Do not open or close the battery-chamber with wet hands or near water, for example while
on or by a body of water.
Q Be sure the camera is completely dry before inserting or removing batteries or memory cards
or connecting the USB or A/V cable.
Q The camera does not float. Be sure to attach the strap and keep it around your wrist when
using the camera.
■ During Use
Q Restrict underwater use to depths of 10 m (32 ft.) or less and periods shorter than 120 minutes.
Q Do not open or close the battery-chamber cover while under water.
Q Do not use in hot springs or heated pools.
Q Do not dive into water with the camera or otherwise subject it to excessive force.
Q If the camera is left on the sand, its temperature may exceed operating limits and sand may
get into the speaker or microphone.
Q Sunscreen, suntan lotion, or other oily substances may discolor the camera body and should
be removed with a damp cloth.
Q The camera may lose water resistance if subjected to excessive force or vibration. Consult your
retailer or a FUJIFILM-authorized repair technician.
xiv
Product Features and Precautions for Use
■ After Use
Q Remove any foreign matter from the water-resistant seal and adjacent surfaces. Foreign matter could damage the seal, lowering water resistance.
Q After using the camera underwater or in locations where foreign matter might adhere to the
camera body, rinse the camera under the tap or leave it in a basin of fresh water for two to
three minutes.
Q Liquid soaps, detergents, alcohol, and other cleansers may affect water resistance and should
never be used.
Q After use, remove water droplets and foreign matter with a dry cloth, firmly latch the batterychamber cover, and soak the camera in fresh water for about ten minutes. Dry the camera
thoroughly after removing it from the water.
■ Storage and Maintenance
Q Do not store at temperatures below 0 °C (32 °F) or above 40 °C (104 °F).
Q To ensure continued water resistance, it is recommended that you have the water-resistant
seal replaced about once a year (a fee is charged for this service). Contact your retailer or a
FUJIFILM-authorized repair technician for more information.
■ Cold Climates
Q Battery performance drops at low temperatures, reducing the number of pictures that can be
taken. Insulate the camera to keep it warm or place it in your clothing.
Q Use an NP-50A battery.
Q Display response may slow at low temperatures. This is not a malfunction.
xv
Table of Contents
For Your Safety ..................................................................ii
IMPORTANT SAFETY INSTRUCTIONS ..................................ii
Safety Notes ....................................................................iv
About This Manual ..........................................................xii
Frequently-Used Buttons ..............................................xiii
Product Features and Precautions for Use....................xiv
Before You Begin
Symbols and Conventions.................................................1
Supplied Accessories .........................................................1
Parts of the Camera ..........................................................2
Camera Displays ...............................................................4
Shooting ........................................................................4
Playback.........................................................................5
First Steps
Charging the Battery ........................................................7
Inserting the Battery and a Memory Card.......................9
Compatible Memory Cards .............................................14
Turning the Camera on and Off ......................................16
Shooting Mode ..............................................................16
Playback Mode ...............................................................16
Basic Setup ......................................................................18
Basic Photography and Playback
Taking Pictures in Q (Scene Recognition) Mode ......19
Viewing Pictures .............................................................23
xvi
More on Photography
Shooting Mode ................................................................24
Choosing a Shooting Mode ............................................24
Shooting Mode Options .................................................25
j PRO LOW-LIGHT ....................................................27
k D-RANGE PRIORITY ...............................................28
r MOTION PANORAMA 360.......................................29
Recording GPS Data with Pictures (Only XP150/160) ...31
The GPS Menu ................................................................32
GPS Tracking...................................................................34
b Intelligent Face Detection .......................................36
Focus Lock ........................................................................37
d Exposure Compensation ..........................................39
F Macro Mode (Close-ups) ...........................................40
N Using the Flash (Intelligent Flash) ............................41
h Using the Self-Timer .................................................43
More on Playback
Playback Options.............................................................44
I Favorites: Rating Pictures .........................................44
Playback Zoom ...............................................................45
Multi-Frame Playback ....................................................46
A Deleting Pictures......................................................47
b Image Search ............................................................48
k PhotoBook Assist......................................................49
Creating a PhotoBook.....................................................49
Viewing Photobooks ......................................................50
Editing and Deleting Photobooks ...................................50
Viewing Panoramas ........................................................51
Table of Contents
Viewing GPS Data (Only XP150/160)..............................52
The GPS Menu ................................................................53
Photo Navigation ...........................................................54
Copying GPS Data to Other Images.................................55
Viewing the GPS Track ....................................................56
Deleting Track Logs ........................................................57
Movies
Recording Movies ............................................................58
Movie Frame Size ...........................................................59
Viewing Movies ...............................................................60
Connections
Viewing Pictures on TV ...................................................61
Viewing Pictures on High-Definition TVs.......................62
Printing Pictures via USB ................................................63
Printing the DPOF Print Order.........................................65
Viewing Pictures on a Computer ....................................67
Windows: Installing MyFinePix Studio ...........................67
Macintosh: Installing FinePixViewer...............................69
Connecting the Camera ..................................................71
Menus
Using the Menus: Shooting Mode ..................................74
Using the Shooting Menu...............................................74
Shooting Menu Options .................................................74
A SHOOTING MODE....................................................74
N ISO........................................................................74
O IMAGE SIZE ............................................................75
T IMAGE QUALITY .....................................................76
P FINEPIX COLOR .......................................................76
D WHITE BALANCE ....................................................77
R CONTINUOUS .........................................................78
b FACE DETECTION.....................................................78
F AF MODE ...............................................................79
F MOVIE AF MODE ....................................................79
W MOVIE MODE .........................................................79
q LED ILLUMINATOR...................................................80
Using the Menus: Playback Mode ..................................81
Using the Playback Menu ...............................................81
Playback Menu Options..................................................81
k PHOTOBOOK ASSIST ................................................81
b IMAGE SEARCH ......................................................81
A ERASE ...................................................................81
c EDIT ......................................................................82
n MOVIE EDIT............................................................83
j MARK FOR UPLOAD TO ............................................84
I SLIDE SHOW ..........................................................85
B RED EYE REMOVAL .................................................86
D PROTECT ................................................................86
G CROP.....................................................................87
O RESIZE ...................................................................87
C IMAGE ROTATE .......................................................88
E COPY .....................................................................88
K PRINT ORDER (DPOF) ..............................................89
J DISP ASPECT ..........................................................89
xvii
Table of Contents
The Setup Menu ..............................................................90
Using the Setup Menu....................................................90
Setup Menu Options ......................................................91
F DATE/TIME.............................................................91
N TIME DIFFERENCE ...................................................91
L a ......................................................91
o SILENT MODE .........................................................91
R RESET ....................................................................92
K FORMAT ................................................................92
A IMAGE DISP. ...........................................................92
B FRAME NO. ............................................................93
G OPERATION VOL......................................................94
H SHUTTER VOLUME ..................................................94
e SOUND ..................................................................94
I PLAYBACK VOLUME ................................................94
J LCD BRIGHTNESS ....................................................94
E LCD MODE .............................................................95
M AUTO POWER OFF...................................................95
L DUAL IS MODE .......................................................95
B RED EYE REMOVAL .................................................96
D DIGITAL ZOOM .......................................................96
p MOVIE ZOOM TYPE .................................................97
t SAVE ORIGINAL IMAGE ............................................97
m AUTOROTATE PB (XP150/XP160 Only) ......................97
c GUIDANCE DISPLAY ................................................97
Q VIDEO SYSTEM .......................................................97
U DATE STAMP ..........................................................98
R DEMONSTRATION (XP150/XP160 Only) ....................98
xviii
Technical Notes
Optional Accessories .......................................................99
Accessories from FUJIFILM............................................100
Caring for the Camera ...................................................101
Storage and Use ...........................................................101
Condensation ..............................................................101
Cleaning .......................................................................102
Traveling ......................................................................102
Troubleshooting
Problems and Solutions ................................................103
Warning Messages and Displays ..................................110
Appendix
Tips and Tricks................................................................114
Internal Memory/Memory Card Capacity ....................117
FinePix XP150/XP160 ..................................................117
FinePix XP170/XP100/XP110 .......................................118
Specifications ................................................................119
q Uploading Pictures to a Smartphone (Tablet)
(XP170 Only) ..................................................................125
Before You Begin
Symbols and Conventions
The following symbols are used in this manual:
Q : This information should be read before use to ensure correct operation.
R : Additional information that may be helpful when using the camera.
P: Other pages in this manual on which related information may be found.
Menus and other text in the LCD monitor are shown in bold. In the illustrations in this manual, displays may be simplified for explanatory purposes.
Supplied Accessories
The following items are included with the camera:
NP-50A rechargeable battery
• Strap
• User Guide
BC-50A battery
charger
Plug adapter
USB cable
CD-ROM
(contains this
manual)
Attaching the Strap
Attach the strap as
shown.
* Shape of adapter varies with region of sale.
1
Parts of the Camera
For more information, refer to the page listed to the right of each item.
Selector button
Move cursor up
d (exposure compensation) button (P 39)
b (delete) button (P xiii)
MENU/OK button
Move cursor left
F (macro) button (P 40)
Move cursor right
N (flash) button (P 41)
Move cursor down
h (self-timer) button (P 43)
* The illustrations in this manual have been simplified for explanatory purposes.
2
Before You Begin
Parts of the Camera
1 Zoom control ...........................................................20, 45
2 Shutter button .............................................................. 21
3 ON/OFF button ............................................................. 16
4 Flash ............................................................................. 41
5 q button (XP170 only) ............................................. 125
GPS button (XP150/XP160 only)................................... 31
m (brightness) button (XP100/XP110 only).................. 6
6 Self-timer lamp ............................................................ 43
LED illuminator ............................................................. 80
7 Built-in GPS antenna (XP150/XP160 only) .................... 31
8 Lens/protective glass
9 Speaker......................................................................... 60
10 Microphone .................................................................. 58
11 LCD monitor .................................................................... 4
*Press and hold the DISP/BACK button until o is displayed.
12 t (movie recording) button ........................................ 58
13 Indicator lamp (see below)
14 Latch..........................................................................9, 12
15 Safety lock .................................................................9, 12
16 Strap eyelet .................................................................... 1
17 DISP (display)/BACK button .....................................6, 18
o (silent mode) button* .............................................xiii
18 a (playback) button................................................... 23
19 Tripod mount
20 Battery chamber ............................................................. 9
21 USB multi-connector ...............................................63, 71
22 Memory card slot .......................................................... 11
23 Micro HDMI connector .................................................. 62
24 Battery latch ............................................................10, 13
The Indicator Lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Glows green
Blinks green
Blinks green and orange
Glows orange
Blinks orange
Blinks red
Before You Begin
Camera status
Focus locked.
Blur, focus, or exposure warning. Picture can be taken.
Recording pictures. Additional pictures can be taken.
Recording pictures. No additional pictures can be taken at this time.
Flash charging; flash will not fire when picture is taken.
Lens or memory error.
3
Parts of the Camera
Camera Displays
The following types of indicator may be displayed during shooting and playback. Indicators vary with camera settings.
■ Shooting
8 Movie mode.................................................................. 59
9 Number of available frames ........................................ 117
9
10
Sensitivity ..................................................................... 74
800
N
11 Image size and quality .............................................75, 76
12 Temperature warning ................................................. 111
13 FINEPIX color ................................................................ 76
14 White balance............................................................... 77
12 / 31 / 2050 10 : 00 AM
15 Battery level ................................................................... 5
-1 2 3
250
F4.5
16 Dual IS mode ................................................................ 95
17 GPS signal strength (XP150/XP160 only) ...................... 31
1 Shooting mode ............................................................. 24 18 Exposure compensation ................................................ 39
2 Intelligent Face Detection indicator .............................. 36 19 Date and time ............................................................... 18
3 Continuous shooting mode ........................................... 78 20 Blur warning..........................................................42, 110
4 Silent mode indicator ................................................3, 91 21 Focus warning .......................................................21, 110
5 Date stamp ................................................................... 98 22 Self-timer indicator ...................................................... 43
6 Focus frame .................................................................. 37 23 Macro (close-up) mode................................................. 40
24 Flash mode ................................................................... 41
7 Internal memory indicator *
*a: indicates that no memory card is inserted and that pictures will be stored in the camera’s internal memory (P 11).
P
4
Before You Begin
Parts of the Camera
■ Playback
100-0001
400
4:3N
4:3
N
YouTube
2050. 12. 31 10 : 00 AM
-1 2 3
1 / 250
F4.5
1 Playback mode indicator..........................................23, 44
2 Intelligent Face Detection indicator .........................36, 86
3 Red-eye removal indicator ............................................ 86
4 Portrait enhancer.......................................................... 25
5 Edit ............................................................................... 82
6 Gift image..................................................................... 44
7 Frame number .............................................................. 93
8 GPS data (XP150/XP160 only)....................................... 52
9 Silent mode indicator ................................................3, 91
10 Mark for upload to ........................................................ 84
11 Photobook assist........................................................... 49
12 Favorites ....................................................................... 44
13 DPOF print indicator ..................................................... 65
14 Protected image ........................................................... 86
Battery Level
Battery level is shown as follows:
Indicator
D (white)
C (white)
B (red)
A (blinks red)
Description
Battery partially discharged.
Battery more than half discharged.
Low battery. Charge as soon as possible.
Battery exhausted. Turn camera off and charge battery.
Before You Begin
5
Parts of the Camera
Hiding and Viewing Indicators
Press DISP/BACK to cycle through shooting and playback indicators as follows:
• Shooting: Indicators displayed/indicators hidden/best framing/HD framing/
GPS infomation (XP150/XP160 only; P 32)
• Playback: Indicators displayed/indicators hidden/I favorites/GPS information
(XP150/XP160 only; P 52)
The m (Brightness) Button (XP100/XP110 Only)
Press the m button to temporarily increase monitor
brightness when shooting outdoors or in bright ambient light. Normal brightness is restored when a picture
is taken.
6
Before You Begin
First Steps
Charging the Battery
The battery is not charged at shipment. Charge the battery before use.
1 Attach the plug adapter.
Attach the plug adapter as shown, making
sure that it is fully inserted and clicks into
place on the charger terminals.
Q The plug adapter is exclusively for use with the
supplied battery charger. Do not use it with
other devices.
Battery charger
Plug adapter
2 Place the battery in the supplied battery charger.
Insert the battery in the orientation indicated by the DFC
labels.
Battery
Arrow
Charge lamp
The camera uses an NP-50A rechargeable battery.
DFC label
DFC label
7
Charging the Battery
3 Plug the charger in.
Plug the charger into an indoor power outlet. The charging indicator will
light.
The Charging Indicator
The charging indicator shows battery charge status as follows:
Charging indicator
Battery status
Off
Battery not inserted.
On (green)
Battery fully charged.
On (orange)
Battery charging.
Blinks (orange)
Battery fault.
Action
Insert the battery.
Remove the battery.
—
Unplug the charger and remove the battery.
4 Charge the battery.
Remove the battery when charging is complete. See the specifications
(P 123) for charging times (note that charging times increase at low temperatures).
Q Unplug the charger when it is not in use.
8
First Steps
Inserting the Battery and a Memory Card
Although the camera can store pictures in internal memory, optional SD,
SDHC, and SDXC memory cards (sold separately) can be used to store additional pictures. After charging the battery, insert the battery and memory
card as described below.
1 Open the battery-chamber cover.
Release the latch (q) and safety lock (w)
and open the battery-chamber cover (e).
w
q
e
R Be sure the camera is off before opening the
battery-chamber cover.
Q Do not open the battery-chamber cover when
the camera is on. Failure to observe this precaution could result in damage to image files
or memory cards.
Q Do not use excessive force when handling the battery-chamber cover.
Q Remove water droplets and other foreign matter with a dry cloth before opening the battery-chamber cover.
First Steps
9
Inserting the Battery and a Memory Card
2 Insert the battery.
Insert the battery with the terminal first and
in the orientation shown by the label inside
the battery chamber, keeping the battery
latch pressed to one side. Confirm that the
battery is securely latched.
Q Insert the battery in the correct orientation.
Do NOT use force or attempt to insert the battery upside down or backwards. The battery
will slide in easily in the correct orientation.
10
Battery latch
Label
First Steps
Inserting the Battery and a Memory Card
3 Insert the memory card.
Holding the memory card in the orientation
shown at right, slide it in until it clicks into
place at the back of the slot.
Q Be sure card is in the correct orientation; do
not insert at an angle or use force. If the memory card is not correctly inserted or no memory card is inserted, a will appear in the LCD
monitor and internal memory will be used for
recording and playback.
Q SD/SDHC/SDXC memory cards can be locked,
making it impossible to format the card or to
record or delete images. Before inserting an
SD/SDHC/SDXC memory card, slide the writeprotect switch to the unlocked position.
First Steps
Click
Write-protect switch
11
Inserting the Battery and a Memory Card
4 Close and latch the battery-chamber cover.
Close the cover (q) and then close the latch
(w) and safety lock (e).
w
e
Q Before closing the cover, confirm that there is q
no dust, sand, or other foreign matter on the
water-resistant seal or adjacent surfaces.
Q When closing the battery-chamber cover, do
not subject it to excessive horizontal forces.
Failure to observe this precaution could cause the water-resistant seal to become misaligned, allowing water into the camera.
Confirming That the Cover Is Latched
Make sure that the strap is not caught in the cover and that
both the latch and safety lock are closed.
■ Correct
The yellow sticker is not visible.
12
■ Incorrect
The yellow sticker is visible.
First Steps
Inserting the Battery and a Memory Card
Removing the Battery and Memory Card
Before removing the battery or memory card, turn the camera off and open the
battery-chamber cover.
To remove the battery, press the battery latch to the side, and
slide the battery out of the camera as shown.
Battery latch
To remove the memory card, press it in and release it slowly.
The card can then be removed by hand. When a memory card
is removed, the card could come out of the slot too quickly.
Use your finger to hold it and gently release the card.
First Steps
13
Inserting the Battery and a Memory Card
■ Compatible Memory Cards
FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera. A complete list of approved memory cards
is available at http://www.fujifilm.com/support/digital_cameras/compatibility/.
Operation is not guaranteed with other cards. The camera can not be used
with xD-Picture Cards or MultiMediaCard (MMC) devices.
Q Memory Cards
• Do not turn the camera off or remove the memory card while the memory card is
being formatted or data are being recorded to or deleted from the card. Failure to
observe this precaution could damage the card.
• Format SD/SDHC/SDXC memory cards before first use, and be sure to reformat all
memory cards after using them in a computer or other device. For more information
on formatting memory cards, see “K FORMAT” (P 92).
• Memory cards are small and can be swallowed; keep out of reach of children. If a
child swallows a memory card, seek medical assistance immediately.
• miniSD or microSD adapters that are larger or smaller than the standard dimensions
of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take
the camera to an authorized service representative. Do not forcibly remove the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of SD/SDHC/SDXC memory
card. Use a G card or better when shooting HD or high-speed movies.
14
First Steps
Inserting the Battery and a Memory Card
• The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in
which pictures are stored. Do not rename or delete this folder or use a computer or
other device to edit, delete, or rename image files. Always use the camera to delete
pictures from memory cards and internal memory; before editing or renaming files,
copy them to a computer and edit or rename the copies, not the originals.
Q Batteries
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this
precaution could prevent the battery from charging.
• Do not affix stickers or other objects to the battery. Failure to observe this precaution
could make it impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery could overheat.
• Read the cautions in “The Battery and Power Supply” (P vi).
• Use only battery chargers designated for use with the battery. Failure to observe this
precaution could result in product malfunction.
• Do not remove the labels from the battery or attempt to split or peel the outer casing.
• The battery gradually loses its charge when not in use. Charge the battery one or
two days before use.
First Steps
15
Turning the Camera on and Off
Shooting Mode
Press the ON/OFF button to turn the
camera on.
Press ON/OFF again to turn the camera
off.
R Switching to Playback Mode
Press the a button to start playback.
Press the shutter button halfway to return
to shooting mode.
16
Playback Mode
To turn the camera on and begin
playback, press the a button for
about a second.
Press the a button again or press
the ON/OFF button to turn the camera
off.
R Switching to Shooting Mode
To exit to shooting mode, press the shutter button halfway. Press the a button
to return to playback.
First Steps
Turning the Camera on and Off
Q Fingerprints and other marks on the protective glass covering the lens can affect
pictures. Keep the glass clean.
Q The ON/OFF button does not completely end the supply of power to the camera.
R Auto Power Off
The camera will turn off automatically if no operations are performed for the length of
time selected for M AUTO POWER OFF (P 95). To turn the camera on, use the ON/OFF
button or press the a button for about a second.
First Steps
17
Basic Setup
A language-selection dialog is displayed the first time the camera is turned
on. Set up the camera as described below (you can reset the clock or change
languages at any time using the F DATE/TIME or L a options in
the setup menu; for information on displaying the setup menu, see page 91).
1 Highlight a language and press MENU/OK.
R Press DISP/BACK to skip the current step. Any steps you skip
will be displayed the next time the camera is turned on.
START MENU
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
PORTUGUÊS
SET
2 The date and time will be displayed. Press the selector
left or right to highlight the year, month, day, hour, or
minute and press up or down to change. To change the
order in which the year, month, and day are displayed,
highlight the date format and press the selector up or
down. Press MENU/OK when settings are complete.
NO
DATE/TIME NOT SET
2014
2013
YY. MM. DD
2012
2011
2010
SET
1. 1 12 : 00
AM
NO
R The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the
language-selection dialog will be displayed when the camera is turned on.
18
First Steps
Basic Photography and Playback
Taking Pictures in Q (Scene Recognition) Mode
This section describes how to take pictures in Q (scene
scene recognition)
recognition mode.
The camera automatically analyzes the composition and adjusts settings appropriately.
1 Turn the camera on.
Press the ON/OFF button to turn the camera on.
Q shooting indicators will be displayed.
The g Icon
This icon indicates that the camera continuously searches for faces to select the
appropriate scene, increasing the drain on the battery.
The Scene Icon
The camera selects the scene according to shooting conditions and the type of
subject: b PORTRAIT (portraits), c LANDSCAPE (landscapes), d NIGHT (poorly-lit landscapes), e MACRO (close ups), f NIGHT PORTRAIT (poorly-lit portraits), g BACKLIT PORTRAIT
(backlit portraits), a AUTO (all other scenes)
19
Taking Pictures in Q (Scene Recognition) Mode
2 Frame the picture.
Use the zoom control to frame the picture in the display.
Zoom out
Zoom in
Zoom indicator
Holding the Camera
Hold the camera steady with both hands and brace your
elbows against your sides. Shaking or unsteady hands can
blur your shots.
To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from
the flash and from the protective glass covering the lens.
20
Basic Photography and Playback
Taking Pictures in Q (Scene Recognition) Mode
3 Focus.
Press the shutter button halfway to focus.
R The lens may make a noise when the camera focuses; this
is normal.
Double
beep
If the camera is able to focus, it will beep twice and the indicator lamp will glow green.
If the camera is unable to focus, the focus frame will turn red, s will be displayed, and the indicator lamp will blink green. Change the composition
or use focus lock (P 37).
Basic Photography and Playback
21
Taking Pictures in Q (Scene Recognition) Mode
4 Shoot.
Smoothly press the shutter button the rest of the way
down to take the picture.
Click
R If the subject is poorly lit, the flash may fire when the picture is taken. For information on using the flash when
lighting is poor, see “N Using the Flash (Intelligent Flash)”
(P 41).
The Shutter Button
The shutter button has two positions. Pressing the shutter button halfway sets
focus and exposure; to shoot, press the shutter button the rest of the way down.
22
Basic Photography and Playback
Viewing Pictures
Pictures can be viewed in the LCD monitor. When taking important photographs, take a test shot and check the results.
1 Press the a button.
The most recent picture will be displayed.
2 View additional pictures.
Press the selector right to view pictures in the
order recorded, left to view pictures in reverse
order.
Press the shutter button halfway to exit to shooting mode.
Basic Photography and Playback
23
More on Photography
Shooting Mode
Choose a shooting mode according to the scene or type of subject.
Choosing a Shooting Mode
1 Press MENU/OK to display the shooting menu.
2 Highlight
A SHOOTING MODE and press the
selector right to display shooting mode options.
SHOOTING MENU
SHOOTING MODE
SET
EXIT
3 Highlight the desired mode and press MENU/OK.
QSCENE RECOGNITION
Selects optimum
camera settings
for certain modes.
SET
CANCEL
4 Press DISP/BACK to exit to shooting mode.
24
Shooting Mode
Shooting Mode Options
Mode
Description
The camera automatically analyzes the composition and selects a scene
Q SCENE RECOGNITION
according to shooting conditions and the type of subject.
Choose for crisp, clear snapshots. This mode is recommended in most
B AUTO
situations.
P PROGRAM AE
The camera sets exposure automatically.
Choose when photographing stationary subjects under low light or with
j PRO LOW-LIGHT
the camera zoomed in (P 27).
Choose when photographing high-contrast scenes. The camera varies
k D-RANGE PRIORITY exposure over a series of shots and blends the results to preserve details
in highlights and shadows (P 28).
The camera takes two shots: one without the flash and one with.
C NATURAL & N
Capture natural lighting under low-light conditions.
D NATURAL LIGHT
Choose for portraits.
L PORTRAIT
Z PORTRAIT ENHANCER Choose for a smooth skin effect when shooting portraits.
Choose for daylight shots of buildings and landscapes.
M LANDSCAPE
r MOTION PANORAMA Pan the camera to record a series of shots that are joined together to form
a panorama (P 29).
360
Choose when photographing moving subjects.
N SPORT
More on Photography
25
Shooting Mode
Mode
O NIGHT
H NIGHT (TRIPOD)
Q SUNSET
R SNOW
26
Description
Choose this mode for poorly lit twilight or night scenes.
Choose this mode for slow shutter speeds when shooting at night.
Choose this mode to record the vivid colors in sunrises and sunsets.
Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow.
S BEACH
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
F UNDERWATER
t UNDER WATER
(WIDE)
s UNDER WATER
(MACRO)
U PARTY
V FLOWER
W TEXT
Choose for underwater photography.
Choose for wide-angle underwater shots that include more of the background behind the main subject.
Choose for underwater close-ups of small objects.
Capture indoor background lighting under low-light conditions.
Choose for vivid close-ups of flowers.
Take clear pictures of text or drawings in print.
More on Photography
Shooting Mode
■ j PRO LOW-LIGHT
Each time the shutter button is pressed, the camera makes
four exposures and combines them into a single photograph. Use to reduce noise and blur when photographing
poorly lit subjects or static subjects at high zoom ratios.
R A single combined photograph may not be created with some
scenes or if the subject or camera moves during shooting. Do not move the camera
until shooting is complete.
PRO LOW-LIGHT
To save unprocessed copies of pictures taken in this mode, select ON for the
t SAVE ORIGINAL IMAGE option in the setup menu (P 97).
Q Keep the camera steady during shooting.
Q Frame coverage is reduced.
Q The camera may make fewer than four exposures in some situations.
More on Photography
27
Shooting Mode
■ k D-RANGE PRIORITY
Each time the shutter button is pressed, the camera takes a series of shots,
each with different exposure. These are combined into a single image, preserving detail in highlights and shadows. Choose for high-contrast scenes.
Press the selector left or right to choose the exposure range before shooting.
R A single combined photograph may not be created with some scenes or if the
subject or camera moves during shooting. Do not move the camera until shooting
is complete.
D-RANGE PRIORITY
To save unprocessed copies of pictures taken in this mode, select ON for the
t SAVE ORIGINAL IMAGE option in the setup menu (P 97).
Q Keep the camera steady during shooting.
Q Frame coverage is reduced.
28
More on Photography
Shooting Mode
■ r MOTION PANORAMA 360
Follow an on-screen guide to take photos that will automatically be joined to form a panorama. The camera zooms
all the way out and remains fixed at the widest angle until
shooting is complete.
1 To select the angle through which you will pan the
camera while shooting, press the selector down. Press the selector left or
right to highlight an angle and press MENU/OK.
2 Press the selector right to view a choice of pan directions. Press the selector left or right to highlight a pan direction and press MENU/OK.
3 Press the shutter button all the way down to start recording. There is no
need to keep the shutter button pressed during recording.
4 Pan the camera in the direction shown by the arrow.
120
Shooting ends automatically when the progress bar is
full and the panorama is complete.
R Shooting ends if the shutter button is pressed all the way
down during shooting. No panorama will be recorded if
the shutter button is pressed before the camera has been
panned through 120 °.
More on Photography
Progress bar
29
Shooting Mode
Q Panoramas are created from multiple frames. The camera may in some cases record
an greater or lesser angle than selected or be unable to stitch the frames together
perfectly. The last part of the panorama may not be recorded if shooting ends before the panorama is complete.
Q Shooting may be interrupted if the camera is panned too quickly or too slowly. Panning the camera in a direction other than that shown cancels shooting.
Q The desired results may not be achieved with moving subjects, subjects close to
the camera, unvarying subjects such as the sky or a field of grass, subjects that are
in constant motion, such as waves and waterfalls, or subjects that undergo marked
changes in brightness. Panoramas may be blurred if the subject is poorly lit.
For Best Results
For best results, move the camera in a small circle at a steady speed, keeping the
camera horizontal and being careful only to pan in the direction shown by the
guides. If the desired results are not achieved, try panning at a different speed.
30
More on Photography
Recording GPS Data with Pictures (Only XP150/160)
To record GPS data with new pictures, press the GPS
button to display the GPS menu and select one of
the following options for LOCATION SEARCH:
• T PERMANENTLY ON: The camera continues to update GPS data for up to
3 hours after being turned off. The camera will be quicker to display GPS
data when turned on, but the drain on the battery will increase. Note that
GPS data is not updated at battery levels of B or below.
• U WHEN SWITCHED ON: The camera updates GPS data only when on. The camera may need some time to acquire GPS data when turned on. This option is
selected automatically at battery levels of B and below.
R GPS works best outdoors under clear skies.
During shooting, GPS data are displayed in the monitor as
shown at right. Signal strength is indicated by the number
of bars; O is displayed when the camera is searching for a
signal, Q if the camera is in GPS demo mode, and P if no
signal is detected. The current location is shown by a place
name or (if no place name is available) by the longitude
and latitude.
P
- MINATO, TOKYO, JAPAN
Location
Signal
strength
R The display of GPS information can be turned off by selecting OFF for LOCATION
INFO (P 32).
More on Photography
31
Recording GPS Data with Pictures
The GPS Menu
The options in the GPS menu are detailed below.
Option
Description
Immediately update GPS data.
POWER SEARCH ON
R GPS data are not updated if OFF for LOCATION SEARCH.
SEARCH.
R GPS data can be updated by pressing and holding the GPS button.
LOCATION SEARCH
Turn the GPS receiver on or off (P 31).
TRACKING DATA
Record GPS data (P 34).
MY LANDMARK REGISTER Add custom landmarks to or delete them from the map database.
AUTO TIME CORRECTION Use GPS data to set the camera clock (P 35).
LOCATION INFO
Display GPS data (P 31).
km/mile
Choose the units used to display GPS information (P 54).
Viewing GPS Data
To view GPS data, press DISP/BACK until GPS data appear in the
monitor. If the compass heading is not correct, it will flash yellow in the GPS display. Recalibrate the compass by moving the
camera slowly in a large figure eight while rotating your wrist as
shown on page 35.
32
NW
More on Photography
Recording GPS Data with Pictures
Q Using GPS increases the drain on the battery, causing battery performance to drop
at low temperatures.
Q The receiver may have an error of a few hundred meters (yards).
Q The camera may be unable to receive GPS data in some locations. If possible,
choose an outdoor location with few obstructions when turning the camera on.
Q The position recorded when a photo is taken may differ from the actual location if
some time has passed since the camera was last able to update GPS data.
Q Select OFF for LOCATION SEARCH (P32) and TRACKING DATA (P 32) in the
setup menu when in a hospital and before takeoff and landing if traveling by air.
Q Place names are current as of the date on which the map database was created
(P 121) and will not be updated to reflect any changes after that date.
Q Place name data are unavailable in some countries and regions. If no name is available, the latitude and longitude will be displayed for a few seconds.
GPS
The camera may be unable to receive GPS data if the antenna (P 2) is obstructed or
when underground, underwater, under a bridge or overpass, inside a vehicle, building, tunnel, or metal briefcase, between tall buildings, or in the vicinity of cell phones
or other devices that broadcast in the 1.5 GHz band.
Obey all local regulations regarding the use of GPS devices. Note that the use of
GPS devices is restricted in some countries, including the People’s Republic of China.
Before going abroad, consult with the embassy or a travel agent. The camera may
display P (no signal) in locations in which restrictions apply.
More on Photography
33
Recording GPS Data with Pictures
GPS Tracking
To record a GPS track log to a file on the memory card, select ON for TRACKING
DATA (P 32; be sure the clock is set to the correct time and date as described on
page 18). A new log file is created when ON is selected and once every 24 hours
thereafter. Note that the camera will continue to update GPS data even when off,
increasing the drain on the battery.
Q GPS logs can be viewed using MyFinePix Studio or the DISP TRACKING DATA option (P 53).
Q See “GPS” (P 33) for information on using GPS.
Q The indicator lamp glows orange during recording GPS data even when the camera is turned off while ON is selected. Select OFF before removing the battery or
memory card. Failure to observe this precaution could damage the card.
Q Tracking ends after the camera has been off for 3 hours consecutively.
Q Signal strength will be displayed in yellow and GPS data will not be logged if the
battery is low (B or less), no memory card is inserted, or the memory card has less
than 32 MB free. To resume the log, select ON after inserting a charged battery or a
memory card with more than 32 MB free.
Q GPS tracking may be interrupted during movie recording and playback.
34
More on Photography
Recording GPS Data with Pictures
Using GPS to Set the Camera Clock
The AUTO TIME CORRECTION item can be used to synchronize the camera clock to
the time provided by GPS satellites. Select ON (W/o SUMMERTIME) to set the clock
to local standard time or ON (W/ SUMMERTIME) to set the clock to local daylight
saving time. If daylight saving time is in effect, time will automatically be advanced
one hour.
Q If the camera is able to receive GPS data, the clock will be synchronized when the camera
is turned off.
Q Selecting g LOCAL for N TIME DIFFERENCE turns AUTO TIME CORRECTION off. Note
that GPS may not provide the correct time in some locations; if necessary select OFF for
AUTO TIME CORRECTION and set the clock using F DATE/TIME (P 91).
Compass Error
If the compass heading is not correct, it will flash yellow in the
GPS display. Recalibrate the compass by moving the camera
slowly in a large figure eight while rotating your wrist as shown.
P
NE <100 m
If the compass heading continues to flash, choose a different location and try again.
Q To ensure that you do not drop the camera, use the strap (P 1).
More on Photography
35
b Intelligent Face Detection
Intelligent Face Detection sets focus and exposure for human faces anywhere
in the frame, preventing the camera from focusing on the background in
group portraits. Choose for shots that emphasize portrait subjects.
To use Intelligent Face Detection, press MENU/OK
to display the shooting menu and select ON for
b FACE DETECTION (P 78). Faces can be detected
with the camera in vertical or horizontal orientation;
if a face is detected, it will be indicated by a green
border. If there is more than one face in the frame,
the camera will select the face closest to the center;
other faces are indicated by white borders.
Q In some modes, the camera may set exposure for the frame as a whole rather than
the portrait subject.
Q If the subject moves as the shutter button is pressed, their face may not be in the
area indicated by the green border when the picture is taken.
36
More on Photography
Focus Lock
To compose photographs with off-center subjects:
1 Focus: Position the subject in the focus frame (U)
and press the shutter button halfway to lock focus
and exposure. Focus and exposure will remain locked
while the shutter button is pressed halfway (AF/AE
lock).
2 Recompose: Keep the button pressed halfway.
3 Shoot: Press the button all the way down.
More on Photography
37
Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to
focus on the subjects listed below. If the camera is unable to focus, focus on another
subject at the same distance and use focus lock to recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Subjects that show little contrast with the background
• Fast-moving subjects.
(for example, subjects in clothing that is the same color
• Subjects photographed through a window or other re- as the background).
flective object.
• Subjects positioned in front of or behind a high-contrast
• Dark subjects and subjects that absorb rather than reflect object that is also in the focus frame (for example, a
light, such as hair or fur.
subject photographed against a backdrop of highly con• Insubstantial subjects, such as smoke or flame.
trasting elements).
38
More on Photography
d Exposure Compensation
To adjust exposure compensation when photographing very bright, very dark, or high-contrast
subjects, press the selector up (d). Press the selector up or down to choose an exposure compensation value and then press MENU/OK.
Choose positive (+) values
to increase exposure
Choose negative (–) values
to reduce exposure
R A d icon and exposure indicator are displayed at settings other than ±0. Exposure
compensation is not reset when the camera is turned off ; to restore normal exposure control, choose a value of ±0.
R Turn the flash off when using exposure compensation.
R Exposure compensation is available only when P (PROGRAM AE) is selected for
shooting mode.
More on Photography
39
F Macro Mode (Close-ups)
For close-ups, press the selector left (F) and select
F. When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use
the zoom control to compose pictures (P 20).
To exit macro mode, press the selector left (F) and
select H.
OFF
OFF
R Use of a tripod is recommended to prevent blur caused
by camera shake.
40
More on Photography
N Using the Flash (Intelligent Flash)
When the flash is used, the camera’s Intelligent Flash system instantly analyzes
the scene based on such factors as the brightness of the subject, its position
in the frame, and its distance from the camera. Flash output and sensitivity
are adjusted to ensure that the main subject is correctly exposed while preserving the effects of ambient background lighting, even in dimly-lit indoor
scenes. Use the flash when lighting is poor, for example when shooting at
night or indoors under low light.
Press the selector right (N) and choose from the following flash modes:
P
AUTO FLASH
According to
shooting conditions
Option
AUTO/K
(AUTO FLASH)
FLASH)
N/L
(FORCED FLASH)
FLASH)
Description
The flash fires when required. Recommended in most situations.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural
coloration when shooting in bright light.
P
The flash does not fire even when the subject is poorly lit. Use of a tripod is
(SUPPRESSED FLASH
FLASH)) recommended.
O/M
Capture both the main subject and the background under low light (note that
(SLOW SYNCHRO)
SYNCHRO) brightly lit scenes may be overexposed).
More on Photography
41
N Using the Flash (Intelligent Flash)
R If the flash will fire, p will be displayed when the shutter button is pressed halfway.
At slow shutter speeds, k will appear in the display to warn that pictures may be
blurred; use of a tripod is recommended.
R The flash may fire several times with each shot. Do not move the camera until
shooting is complete.
R The flash may cause vignetting.
Red-Eye Removal
When Intelligent Face Detection (P 36) and red-eye removal (P 86) are
on, red-eye removal is available in auto (K; RED EYE REDUCTION), flash
on (L; FORCED FLASH), and slow sync (M; RED EYE & SLOW) modes.
Red-eye removal minimizes “red-eye” caused when light from the flash is
reflected from the subject’s retinas as shown in the illustration at right.
42
More on Photography
h Using the Self-Timer
To use the self-timer, press the selector down (h)
and choose from the following options:
OFF
OFF
Option
Description
Self-timer off.
The camera starts the timer when it detects two portrait subjects close together.
Press the selector up to choose how close the subjects must be together before
a (COUPLE TIMER)
the timer starts (the more hearts, the closer the subjects must be together).
R To stop the timer before the picture is taken, press DISP/BACK
DISP/BACK..
The camera will start the timer when it detects the selected number of portrait
g (GROUP TIMER) subjects. Press the selector up to choose the number of subjects.
R To stop the timer before the picture is taken, press DISP/BACK
DISP/BACK..
The shutter is released ten seconds after the shutter button is pressed. Use for
S (10 SEC)
self-portraits. The self-timer lamp on the front of the camera blinks while the
timer counts down.
The shutter is released two seconds after the shutter button is pressed. Use to
R (2 SEC)
reduce blur caused by the camera moving when the shutter-release button is
pressed. The self-timer lamp will blink as the timer counts down.
T (OFF)
More on Photography
43
More on Playback
Playback Options
To view the most recent picture in the LCD monitor, press the a button.
100-0001
Press the selector right to view pictures in the order recorded, left to view
pictures in reverse order. Keep the selector pressed to scroll rapidly to the
desired frame.
R Pictures taken using other cameras are indicated by a m (“gift image”) icon during
playback.
I Favorites: Rating Pictures
To rate the picture currently displayed in full-frame playback, press DISP/BACK
and press the selector up and down to select from zero to five stars.
44
Playback Options
Playback Zoom
Select T to zoom in on pictures displayed in single-frame playback; select W to
zoom out. When the picture is zoomed in, the selector can be used to view
areas of the image not currently visible in the display.
Zoom indicator
Navigation window shows
portion of image currently
displayed in LCD monitor
Press DISP/BACK to exit zoom.
R The maximum zoom ratio varies with image size. Playback zoom is not available
with cropped or resized copies saved at a size of a or smaller.
More on Playback
45
Playback Options
Multi-Frame Playback
Selecting W when a picture is shown full-frame in the LCD monitor displays
the current image with previous and following images in the background.
Select W to increase the number of images displayed to two, nine, or one
hundred, T to view fewer images.
100-0001
When two or more images are displayed, use the selector to highlight images
and press MENU/OK to view the highlighted image full frame. In the nine- and
hundred-frame displays, use the selector to view more pictures.
46
More on Playback
A Deleting Pictures
To delete individual pictures, multiple selected
pictures, or all pictures, press MENU/OK, select
A ERASE (P 81), and choose from the options below. Note that deleted pictures can not be recovered. Copy important pictures to a computer or other storage device before
proceeding.
PLAYBACK MENU
ERASE
BACK
FRAME
SELECTED FRAMES
ALL FRAMES
SET
Option
Description
Press the selector left or right to scroll through pictures and press MENU/OK to
FRAME
delete the current picture (a confirmation dialog is not displayed).
Highlight pictures and press MENU/OK to select or deselect (pictures that are
protected or in a print order are shown by u). When the operation is comSELECTED FRAMES
plete, press DISP/BACK to display a confirmation dialog, then highlight OK and
press MENU/OK to delete the selected pictures.
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures (if a memory card is inserted, only the pictures on
ALL FRAMES
the memory card will be affected; the pictures in internal memory are only deleted if no memory card is inserted). Pressing DISP/BACK cancels deletion; note
that any pictures deleted before the button was pressed can not be recovered.
R Protected pictures can not be deleted. Remove protection from any pictures you
wish to delete (P 86).
R If a message appears stating that the selected images are part of a DPOF print order,
press MENU/OK to delete the pictures.
More on Playback
47
b Image Search
Search for pictures.
1 Select b IMAGE SEARCH in the playback menu (P 81), highlight one of
the following search criteria, and press MENU/OK:
• BY DATE: Search by date.
• BY GPS LOCATION NAME (XP150/XP160 only): Search by location name (location
names that do not begin with a letter from A to Z are listed in the search
conditions under “#”).
• BY FACE: Search for faces from the face recognition database.
• BY I FAVORITES: Search by rating.
• BY SCENE: Search by scene.
• BY TYPE OF DATA: Find all still pictures, all movies, or edited pictures.
• BY UPLOAD MARK: Find all pictures selected for upload to a specified destination.
2 Select a search condition. Only pictures that match the search condition
will be displayed. To delete or protect selected pictures or to view the
search results in a slide show, press MENU/OK and choose A ERASE (P 47),
D PROTECT (P 86), or I SLIDE SHOW (P 85).
48
More on Playback
k PhotoBook Assist
Create books from your favorite photos.
Creating a PhotoBook
1 Select NEW BOOK for k PHOTOBOOK ASSIST in the playback menu
(P 81) and choose from the following options:
• SELECT FROM ALL: Choose from all available pictures.
• SELECT BY IMAGE SEARCH: Choose from pictures matching selected search
conditions (P 48).
R Neither photographs a or smaller nor movies can be selected for photobooks.
2 Scroll through the images and press the selector up to select or deselect.
To display the current image on the cover, press the selector down. Press
MENU/OK to exit when the book is complete.
R The first picture selected becomes the cover image. Press the selector down to
select a different image for the cover.
3 Select COMPLETE PHOTOBOOK (to select all photos or all photos matching the specified search conditions for the book, choose SELECT ALL).
The new book will be added to the list in the photobook assist menu.
Q Books can contain up to 300 pictures.
Q Books that contain no photos are automatically deleted.
More on Playback
49
k PhotoBook Assist
Viewing Photobooks
Highlight a book in the photobook assist menu and press MENU/OK to display
the book, then press the selector left or right to scroll through the pictures.
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the on-screen instructions.
• EDIT: Edit the book as described in “Creating a PhotoBook” (P 49).
• ERASE: Delete the book.
Photobooks
Photobooks can be copied to a computer using the supplied MyFinePix Studio software.
50
More on Playback
Viewing Panoramas
If you press the selector down when a panorama is displayed full frame, the
camera will play back the picture from left to right or from bottom to top. To
pause playback, press the selector down; press the selector down again to
resume. To exit to full-frame playback, press the selector up while panorama
playback is in progress.
PLAY
STOP
More on Playback
PAUSE
51
Viewing GPS Data (Only XP150/160)
GPS icon
During playback, pictures for which GPS data exist are indicated by a J icon. GPS data are shown for a few seconds each time the picture is displayed.
100-0001
- MINATO, TOKYO, JAPAN
Viewing GPS Data
To view the compass heading at the time the picture was taken,
press DISP/BACK until GPS data appear in the monitor.
100-0001
NE
12 / 31 / 2050 10 : 00 AM
N 10°00’00” E 10°00’00”
52
More on Playback
Viewing GPS Data (Only XP150/160)
The GPS Menu
The GPS menu can be displayed by pressing the GPS
button.
Option
POWER SEARCH ON
LOCATION SEARCH
TRACKING DATA
DISP TRACKING DATA
ERASE TRACKING DATA
PHOTO NAVIGATION
LOCATION INFO COPY
AUTO TIME CORRECTION
LOCATION INFO
km/mile
More on Playback
Description
Immediately update GPS data.
R GPS data are not updated if OFF for LOCATION SEARCH.
SEARCH.
R GPS data can be updated by pressing and holding the GPS button.
Turn the GPS receiver on or off (P 31).
Record GPS data (P 34).
View the GPS track (P 56).
Delete the GPS track (P 57).
View the approximate direction and distance to the location where current the picture was taken (P 54).
Copy GPS data from one picture to another (P 55).
Use GPS data to set the camera clock (P 35).
Display GPS data (P 31).
Choose the units used to display GPS information (P 54).
53
Viewing GPS Data (Only XP150/160)
Photo Navigation
To show the direction and distance from your present position to the location
where a picture was taken:
1 Select an option other than OFF for LOCATION SEARCH and confirm that
the camera is receiving GPS data (P 53).
2 Display a picture with a J icon.
3 Select PHOTO NAVIGATION (P 53) in the R menu.
The approximate direction and distance to the location
where the picture was taken are displayed as shown, using the units selected for km/mile (P 53). Distances over
1000 units are indicated by “>”, those under 100 units by
“<”.
100-0001
NE <100 m
- MINATO, TOKYO, JAPAN
R Photo navigation ends when the next picture is displayed.
Calibration
A f icon indicates that the camera’s internal sensor requires
calibration. Move the camera slowly in a large figure eight while
rotating your wrist as shown on page 35. If the icon does not clear
from the display, choose a different location and try again.
100-0001
COMPASS FACES INTERFERENCE
NE
ROTATE THE CAMERA AS FIGURE 8
1050hPa 2000m
12 / 31 / 2050 10 : 00 AM
N
- 10°00’00”
MINATO, TOKYO,
E 10°00’00”
JAPAN
Q To ensure that you do not drop the camera, use the strap (P 1).
54
More on Playback
Viewing GPS Data (Only XP150/160)
Copying GPS Data to Other Images
GPS data can be copied from other pictures to images that lack correct GPS
information.
1 Select LOCATION INFO COPY in the R menu (P 53).
2 Press the selector left or right to display the source image for the GPS data
and press MENU/OK.
3 Press the selector left or right to display the destination and press MENU/OK
to copy the data to the image.
Q Once copied, the new GPS data can not be deleted and the original GPS data can
not be recovered. Note, however, that copying data from a picture with GPS data
to a picture with GPS data will delete the original GPS data recorded with the destination picture.
Q The camera may be unable to copy GPS data to or from images created on other
devices.
More on Playback
55
Viewing GPS Data (Only XP150/160)
Viewing the GPS Track
To view the track created with TRACKING DATA (P 53):
1 Select DISP TRACKING DATA in the R menu.
2 Press the selector up or down to highlight the desired
track log.
DISP TRACKING DATA
2050
N
10/ 7
10/24
11/ 3 W
2051
1/ 3
S
100km
2/15
E
10:00 AM
Select a track log
3 The track is shown by a line with dots (z) representing
the locations where photographs were taken. Press the
selector left or right to highlight a location (the highlighted location is shown by V).
DISP TRACKING DATA
2050
N
10/ 7
10/24
11/ 3 W
2051
1/ 3
S
100km
2/15
E
10:00 AM
Select a location
4 Press MENU/OK to view the photograph taken at the
highlighted location. Press the selector left or right to
view additional photographs or press DISP/BACK to return to the track. Press MENU/OK to exit to normal playback.
56
DISP TRACKING DATA
NE
12 / 31 / 2050
EXIT
10 : 00 AM
More on Playback
Viewing GPS Data (Only XP150/160)
Deleting Track Logs
To delete track logs recorded with TRACKING DATA (P 53):
1 Select ERASE TRACKING DATA in the R menu.
2 Press the selector up or down to highlight the desired
track log and press MENU/OK.
ERASE TRACKING DATA
2050
2/15
N
10/ 7
10/24
E
11/ 3 W
2051
1/ 3
S
CANCEL
100kmYES
10:00 AM
Select a track log
3 A confirmation dialog will be displayed; highlight OK and press MENU/OK to
delete the selected log.
R Images are not deleted when track logs are erased.
More on Playback
57
Movies
Recording Movies
Press t to shoot a movie. During recording, y REC
and the time remaining will be displayed in the LCD
monitor and sound will be recorded via the built-in
microphone (be careful not to cover the microphone
during recording).
REC
12s
Time available is displayed
in monitor
To end recording, press the t button again. Recording ends automatically
when the movie reaches maximum length or memory is full.
R Zoom can be adjusted while recording is in progress. The type of zoom can be selected using the p MOVIE ZOOM TYPE option in the setup menu (P 97).
R Focus, exposure and white balance are adjusted automatically throughout recording (the focus mode can be selected using the F MOVIE AF MODE option in the
shooting menu; P 79). The color and brightness of the image may vary from that
displayed before recording begins.
R Sounds made by the camera may be recorded.
58
Recording Movies
Q The indicator lamp lights while movies are being recorded. Do not open the battery chamber during shooting or while the indicator lamp is lit. Failure to observe
this precaution could prevent the movie from being played back.
Q Vertical or horizontal streaks may appear in movies containing very bright subjects.
This is normal and does not indicate a malfunction.
Q The temperature of the camera may rise if it is used to record movies for an extended period or if the ambient temperature is high. This is normal and does not
indicate a malfunction.
Movie Frame Size
Before recording, select a frame size using the W MOVIE MODE option in the
shooting menu (P 79).
Option
i 1920 (1920 × 1080)
h 1280 (1280 × 720)
f (640 × 480)
k 640 × 480 (80 fps)
k 320 × 240 (160 fps)
k 320 × 240 (240 fps)
Movies
Description
Full HD (High Definition).
High Definition.
Standard definition.
High speed movie. Sound is not recorded, and focus, exposure, and white
balance are not adjusted automatically.
59
Viewing Movies
During playback, movies are displayed in the LCD monitor
as shown at right. The following operations can be performed while a movie is displayed:
Option
Start/pause
playback
End playback/
delete
Description
Press the selector down to start playback. Press again to
pause.
Press the selector up to end playback. If playback is not in
progress, pressing the selector up will delete the movie.
Press the selector left or right to adjust playback speed durAdjust speed
ing playback.
Press MENU/OK to pause playback and display volume controls. Press the selector up or down to adjust the volume
Adjust volume
and press MENU/OK to exit. Volume can also be adjusted
from the setup menu.
100-006
PLAY
Playback Speed
Press the selector left or right to adjust playback speed. Speed is Arrow
shown by the number of arrows (M or N).
STOP
5m42s
PAUSE
Q Do not cover the speaker during playback.
60
Movies
Connections
Viewing Pictures on TV
Connect the camera to a TV to show pictures to a group.
1 Turn the camera off and connect an optional A/V cable as shown below.
Connect yellow plug to
video-in jack
Insert into
USB multi-connector
Connect white plug to
audio-in jack
Q When connecting cables, be sure the connectors are fully inserted.
R Image quality may drop during movie playback.
2 Tune the television to the video input channel. See the documentation
supplied with the television for details.
3 Press the a button for about a second to turn the camera on. The camera
monitor turns off and pictures and movies are played back on the TV. Note
that the camera volume controls have no effect on sounds played on the
TV; use the television volume controls to adjust the volume.
61
Viewing Pictures on High-Definition TVs
The camera can be connected to High-Definition (HD) devices using an HDMI
cable (available separately from third-party sources).
1 Turn the camera off and connect the HDMI cable as shown below.
Micro HDMI connector
Insert into HDMI
connector
Insert into HDMI
connector
Q When connecting cables, be sure the connectors are fully inserted.
R When an HDMI cable is connected, pictures and sound are played back on the
TV.
2 Tune the television to the HDMI input channel. See the documentation
supplied with the television for details.
3 Press the a button for about a second to turn the camera on. The camera
monitor turns off and pictures and movies are played back on the TV. Note
that the camera volume controls have no effect on sounds played on the
TV; use the television volume controls to adjust the volume.
R The USB cable can not be used while an HDMI cable is connected.
R Some televisions may briefly display a black screen when movie playback begins.
62
Connections
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected
directly to the printer as shown below and pictures can be printed
without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
1 Connect the supplied USB cable as shown and turn the printer on.
2 Turn the camera on.
3 Press the selector left or right to display a picture you wish to print.
4 Press the selector up or down to choose the number of copies (up to 99).
5 Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a
confirmation dialog when settings are complete.
Connections
63
Printing Pictures via USB
6 Press MENU/OK to start printing. Printing can be interrupted by pressing
DISP/BACK, but note that some printers may not respond immediately. If
the printer stops before printing is complete, turn the camera off and then
on again.
7 After confirming that PRINTING has cleared from the camera display, turn
the camera off and disconnect the USB csable.
R Pictures can be printed from internal memory or a memory card that has been
formatted in the camera.
R If no pictures are selected, the camera will print one copy of the current picture.
R Page size, print quality, and border selections are made using the printer.
Printing the Date of Recording
To print the date of recording on pictures, press DISP/BACK in the PictBridge display
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without
the date of recording, select PRINT WITHOUT DATE).
64
Connections
Printing Pictures via USB
Printing the DPOF Print Order
The K PRINT ORDER (DPOF) option in the playback menu can be used to
create a digital “print order” for PictBridge-compatible printers (P 99) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is a standard that allows pictures to be
printed from “print orders” stored in internal memory or on a memory card.
The information in the order includes the pictures to be printed and the
number of copies of each picture.
1 Select playback mode and press MENU/OK to display the playback menu.
2 Highlight K PRINT ORDER (DPOF) and press MENU/OK.
3 Highlight one of the following options and press MENU/OK:
• WITH DATE s: Print the date of recording on pictures.
• WITHOUT DATE: Do not print the date of recording on pictures.
R Some printers do not support date printing. See the printer manual for details.
4 Press the selector left or right to display a picture you wish to add to or
remove from the print order.
Connections
65
Printing Pictures via USB
5 Press the selector up or down to choose the number of copies (up to 99).
To remove a picture from the print order, press the selector down until the
number of copies is zero.
6 Repeat Steps 4–5 to complete the print order and press MENU/OK when
settings are complete.
7 A confirmation dialog will be displayed. Press MENU/OK to save the print
order.
R Remove the memory card to create or modify a print order for the pictures in
internal memory.
R Print orders can contain a maximum of 999 pictures.
R If a memory card is inserted containing a print order created by another camera,
a message will be displayed. Create a new print order as described above.
66
Connections
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where
they can be stored, viewed, organized, and printed. Before proceeding, install
the software as described below. Do NOT connect the camera to the computer
until installation is complete.
Windows: Installing MyFinePix Studio
1 Confirm that the computer meets the following system requirements:
Windows 7 (SP 1)/Windows Vista (SP 2) 1
3 GHz Pentium 4 or better
(2.4 GHz Core 2 Duo or better) 2
Windows XP (SP 3) 1
2 GHz Pentium 4 or better
CPU
(2.4 GHz Core 2 Duo or better) 2
512 MB or more
RAM
1 GB or more
(1 GB or more) 2
Free disk space
2 GB or more
Supports DirectX 9 or later
Supports DirectX 7 or later
GPU
(recommended
recommended))
(required; performance not guaranteed with other GPUs)
GPUs)
Video
1,024 × 768 pixels or more with 24-bit color or better
• Built-in USB port recommended. Operation is not guaranteed with other
USB ports.
• .NET Framework 3.5 Service Pack 1 required when uploading images or usOther
ing Map Viewer.
• Internet connection (broadband recommended) required to install
.NET Framework (if necessary), to use auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
1 Other versions of Windows are not supported. Only pre-installed operating systems are
supported; operation is not guaranteed on home-built computers or computers that have
been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.
Connections
67
Viewing Pictures on a Computer
2 Start the computer. Log in to an account with administrator privileges
before proceeding.
3 Exit any applications that may be running and insert the installer CD in a
CD-ROM drive.
Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control”
dialog will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and
follow the on-screen instructions to install MyFinePix Studio.
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX
CD window and double-click setup or SETUP.EXE.
4 If prompted to install Windows Media Player or DirectX, follow the onscreen instructions to complete installation.
5 Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer CD in a dry location out of direct sunlight in case
you need to re-install the software.
Installation is now complete. Proceed to “Connecting the Camera” (P 71).
68
Connections
Viewing Pictures on a Computer
Macintosh: Installing FinePixViewer
1 Confirm that the computer meets the following system requirements:
PowerPC or Intel (Core 2 Duo or better) *
Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.
OS
com/support/digital_cameras/compatibility/ for more information). Mac OS X
version 10.7 and later not supported.
RAM
256 MB or more (1 GB or more) *
A minimum of 200 MB required for installation with 400 MB available when
Free disk space
FinePixViewer is running
Video
800 × 600 pixels or more with thousands of colors or better
Built-in USB port recommended. Operation is not guaranteed with other USB
Other
ports.
CPU
* Recommended when displaying HD movies.
2 After starting the computer and quitting any applications that may be running, insert the installer CD in a CD-ROM drive and double-click Installer
for Mac OS X.
3 An installer dialog will be displayed; click Installing FinePixViewer to start
installation. Enter an administrator name and password when prompted
and click OK, then follow the on-screen instructions to install FinePixViewer.
Click Exit to quit the installer when installation is complete.
Connections
69
Viewing Pictures on a Computer
4 Remove the installer CD from the CD-ROM drive. Note that you may be
unable to remove the CD if Safari is running; if necessary, quit Safari before
removing the CD. Store the installer CD in a dry location out of direct sunlight in case you need to re-install the software.
5 Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,
and select Preferences… from the Image Capture application menu. The
Image Capture preferences dialog will be displayed; choose Other… in
the When a camera is connected, open menu, then select FPVBridge in
the “Applications/FinePixViewer” folder and click Open. Quit Image Capture.
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”
folder and start Image Capture. The camera will be listed under DEVICES;
select the camera and choose FPVBridge from the Connecting this camera opens menu and click Choose. Quit Image Capture.
Installation is now complete. Proceed to “Connecting the Camera” (P 71).
70
Connections
Viewing Pictures on a Computer
Connecting the Camera
1 If the pictures you wish to copy are stored on a memory card, insert the
card into the camera.
R Windows users may require the Windows CD when starting the software for
the first time.
Q Loss of power during transfer could result in loss of data or damage to internal
memory or the memory card. Charge the battery before connecting the camera.
2 Turn the camera off and connect the
supplied USB cable as shown, making
sure the connectors are fully inserted.
Connect the camera directly to the computer; do not use a USB hub or keyboard.
Q Be sure the battery-chamber cover is open
before attempting to open or close the connector cover.
3 Press the a button for about a second to turn the camera on and follow
the on-screen instructions to copy pictures to the computer. To exit without copying pictures, click Cancel.
Connections
71
Viewing Pictures on a Computer
For more information on using the supplied software, start the application
and select the appropriate option from the Help menu.
Q If a memory card containing a large number of images is inserted, there may be a
delay before the software starts and you may be unable to import or save images.
Use a memory card reader to transfer pictures.
Q Make sure that the computer does not display a message stating that copying is in
progress and that the indicator lamp is out before turning the camera off or disconnecting the USB cable (if the number of images copied is very large, the indicator
lamp may remain lit after the message has cleared from the computer display).
Failure to observe this precaution could result in loss of data or damage to internal
memory or the memory card.
Q Disconnect the camera before inserting or removing memory cards.
Q In some cases, it may not be possible to access pictures saved to a network server
using the supplied software in the same way as on a standalone computer.
Q The user bears all applicable fees charged by the phone company or Internet service provider when using services that require an Internet connection.
72
Connections
Viewing Pictures on a Computer
Disconnecting the Camera
After confirming that the indicator lamp is out, follow the on-screen instructions to
turn the camera off and disconnect the USB cable.
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before beginning reinstallation. After quitting the software and disconnecting the camera, drag
the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control panel and use “Programs and
Features” (Windows 7/Windows Vista) or “Add or Remove Programs” (Windows XP) to
uninstall MyFinePix Studio. Under Windows, one or more confirmation dialogs may
be displayed; read the contents carefully before clicking OK.
Connections
73
Menus
Using the Menus: Shooting Mode
Using the Shooting Menu
To display the shooting menu, press MENU/OK in
shooting mode. Highlight items and press the selector right to view options, then highlight an option and press MENU/OK. Press DISP/BACK to exit when
settings are complete. The options available vary with the shooting mode
selected.
Shooting Menu Options
A SHOOTING MODE
Choose a shooting mode according to the type of subject (P 24).
(defaults to Q)
(defaults to AUTO)
N ISO
Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mottling may appear in pictures taken at high sensitivities.
100
Bright
Less noticeable
ISO
Scene
Noise (mottling)
3200
Dark
More noticeable
Option
Description
AUTO
Sensitivity is adjusted automatically in response to shooting conditions.
3200 / 1600 / 800 / 400 /
Sensitivity is set to the specified value, which is shown in the display.
200 / 100
74
Using the Menus: Shooting Mode
O IMAGE SIZE
Choose the image size and aspect ratio at which pictures are recorded. Large pictures can be printed at large sizes with no drop in quality,
while small pictures require less memory, allowing more pictures to be
recorded.
(defaults to O 4:3)
O4:3
Size
Aspect ratio
Size Versus Aspect Ratio
Size
Option
O
P
Q
Prints at sizes up to
34 × 25 cm (13.5 × 10 in.)
24 × 18 cm (9.5 × 7 in.)
17 × 13 cm (7 × 5 in.)
4 : 3: Pictures have the same
proportions as the camera
display.
3
2
4
Menus
Aspect ratio
3 : 2: Pictures have the same
proportions as a frame of
35 mm film.
16 : 9: Suited for display on
High Definition (HD) devices.
9
3
16
75
Using the Menus: Shooting Mode
T IMAGE QUALITY
Choose how much image files are compressed.
Option
FINE
NORMAL
Description
Low compression. Select for higher image quality.
High compression. Select this option to store more pictures.
P FINEPIX COLOR
Enhance contrast and color saturation or take pictures in black and white.
Option
c STANDARD
a CHROME
b B&W
f SEPIA
(defaults to N)
(defaults to c)
Description
Standard contrast and saturation. Recommended in most situations.
Vivid contrast and color. Choose for vivid shots of flowers or enhanced greens
and blues in landscapes.
Take pictures in black and white.
Take pictures in sepia.
R Settings other than c STANDARD are shown by an icon in the LCD monitor.
R Depending on the subject, the effects of a CHROME may not be visible in the LCD monitor.
76
Menus
Using the Menus: Shooting Mode
D WHITE BALANCE
For natural colors, choose a setting that matches the light source.
Option
AUTO
i
j
k
l
m
n
(defaults to AUTO)
Description
White balance adjusted automatically.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
R Results vary with shooting conditions. Play pictures back after shooting to check colors in
the LCD monitor.
Menus
77
Using the Menus: Shooting Mode
R CONTINUOUS
Capture motion in a series of pictures.
Option
M FINAL
N FINAL
L FINAL
J CONTINUOUS
K CONTINUOUS
I CONTINUOUS
OFF
(defaults to OFF)
Description
The camera takes up to 40 shots while the shutter button is pressed and records
the last 12 pictures.
The camera takes up to 12 pictures while the shutter button is pressed.
One photograph is taken each time the shutter button is pressed.
R Focus and exposure are determined by the first frame in each series.
R O IMAGE SIZE is fixed at Q.
R The flash turns off automatically. The previously selected flash mode is restored when OFF is
selected for R CONTINUOUS
CONTINUOUS..
R Frame rate varies with shutter speed.
R The number of pictures that can be recorded depends on the memory available.
R Only one photo is taken if the self-timer is used.
b FACE DETECTION
Choose whether the camera automatically detects and sets focus and exposure for human portrait subjects (P 36).
78
Menus
Using the Menus: Shooting Mode
F AF MODE
This option controls how the camera selects the focus area. Regardless of the option selected,
the camera will focus on the subject in the center of the LCD monitor when macro mode is on.
Option
r CENTER
x TRACKING
Description
The camera focuses on the subject in the center of the frame.
Position the subject in the center focus area and press the selector left. Focus
will track the subject as it moves through the frame.
R Note that in x mode, the camera focuses continuously, increasing the drain on the battery,
and that the sound of the camera focusing may be audible.
F MOVIE AF MODE
F MOVIE
This option controls how the camera selects the focus area for movies.
(defaults to r)
Option
r CENTER
Description
The camera focuses on the subject in the center of the frame.
The camera continuously adjusts focus to reflect changes in the distance to
u CONTINUOUS
subjects near the center of the frame.
R Note that in u mode, the camera focuses continuously, increasing the drain on the battery,
and that the sound of the camera focusing may be audible.
W MOVIE MODE
Choose a frame size for movies (P 59).
Menus
(defaults to i)
79
Using the Menus: Shooting Mode
(defaults to OFF)
q LED ILLUMINATOR
Choose whether the LED (P 2) lights to illuminate nearby subjects when lighting is poor.
Option
ON
OFF
R
R
R
R
80
Description
The LED lights during shooting.
LED off.
The LED will not light when ON is selected for o SILENT MODE in the setup menu (P
(P 91).).
Selecting ON increases the drain on the battery. Select OFF when the LED is not in use.
q LED ILLUMINATOR is automatically reset to OFF when the camera is turned off.
The LED turns off if no operations are performed for a short period. Operating any of the
camera controls reactivates the LED.
Menus
Using the Menus: Playback Mode
Using the Playback Menu
To display the playback menu, press MENU/OK in playback mode. Highlight items and press the selector
right to view options, then highlight an option and
press MENU/OK. Press DISP/BACK to exit when settings
are complete.
Playback Menu Options
k PHOTOBOOK ASSIST
Create books from your favorite photos (P 49).
b IMAGE SEARCH
Search for pictures (P 48).
A ERASE
Delete all or selected pictures (P 47).
Menus
81
Using the Menus: Playback Mode
c EDIT
Create a retouched copy of the current picture.
1 Display the desired picture.
2 Select c EDIT in the playback menu and choose from the following options:
Option
CROP
ASPECT RATIO
BRIGHTNESS
CONTRAST
COLOR
SEPIA
FACE MOSAIC
Description
Crop the copy.
Choose the aspect ratio.
Adjust brightness.
Adjust contrast.
Choose positive values for “warmer” colors, negative values for “cooler” colors.
Convert the copy to sepia or black and white.
If the original was taken with Intelligent Face Detection, a mosaic effect can
be applied to up to four faces. If Intelligent Face Detection was off or no
faces were detected, the mosaic effect will be applied to the center of the
image.
3 Press MENU/OK to create a retouched copy (in some cases, additional options will be displayed;
adjust settings as desired and press MENU/OK to save the copy).
R Retouched copies can not be further retouched, cropped, or rotated.
R Retouched copies are 640 × 480 pixels in size.
82
Menus
Using the Menus: Playback Mode
n MOVIE EDIT
Edit movies.
■ MOVIE TRIMMING
Remove opening or ending footage to create an edited copy of the current movie.
1 Display the desired movie.
2 Select n MOVIE EDIT > MOVIE TRIMMING in the playback menu. To remove footage from
the start of the copy, proceed to Step 3; otherwise, proceed to Step 4.
3 Press the selector down to begin playback and press it down again when the new opening
frame is reached.
4 Press MENU/OK. To remove footage from the end of the copy, proceed to Step 5; otherwise,
proceed to Step 6 (to exit without creating an edited copy, press DISP/BACK).
5 Press the selector down to begin playback and press it down again when the new closing
frame is reached.
6 Press MENU/OK to save the copy.
■ MOVIE JOIN
Add existing footage to the end of the current movie to create an edited copy.
1 Display the desired movie.
2 Select n MOVIE EDIT > MOVIE JOIN in the playback menu.
3 Press the selector left or right to highlight a movie.
4 Press MENU/OK to add the highlighted footage to the end of the current movie and save the
resulting copy, or press DISP/BACK to exit without creating a copy.
R Both movies must have been recorded at the same frame size and frame rate.
Menus
83
Using the Menus: Playback Mode
j MARK FOR UPLOAD TO
Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).
■ Selecting Pictures for Upload
1 Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and
movies for upload to Facebook.
2 Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press
DISP/BACK to exit when all the desired pictures are selected.
R Only movies can be selected for upload to YouTube.
R During playback, selected pictures are indicated by j YouTube or j FACEBOOK icons.
■ RESET ALL: Deselecting All Pictures
Choose RESET ALL to deselect all pictures. If the number of pictures affected is very large, a
message will be displayed while the operation is in progress. Press DISP/BACK to exit before the
operation is complete.
■ Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix
Studio.
Select with camera
Upload from computer
For information on installing MyFinePix Studio and connecting the camera to a computer, see
“Viewing Pictures on a Computer” (P 67).
84
Menus
Using the Menus: Playback Mode
I SLIDE SHOW
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.
Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at
any time by pressing MENU/OK.
Option
NORMAL
FADE-IN
NORMAL g
FADE-IN g
MULTIPLE
SCRAP BOOK VIEW
SELECT BGM
Description
Press selector left or right to go back or skip ahead one frame. Select FADE-IN
for fade transitions between frames.
As above, except that camera automatically zooms in on faces selected with
Intelligent Face detection.
Display several pictures at once.
Display multiple pictures in random positions and sizes.
Choose background music.
R The camera will not turn off automatically while a slide show is in progress.
Menus
85
Using the Menus: Playback Mode
B RED EYE REMOVAL
If the current picture is marked with a g icon to indicate that it was taken with Intelligent Face
Detection, this option can be used to remove red-eye. The camera will analyze the image; if redeye is detected, the image will be processed to create a copy with reduced red-eye.
1 Display the desired picture.
2 Select B RED EYE REMOVAL in the playback menu.
3 Press MENU/OK.
R Red eye may not be removed if the camera is unable to detect a face or the face is in profile.
Results may differ depending on the scene. Red eye can not be removed from pictures that
have already been processed using red-eye removal or pictures created with other devices.
R The amount of time needed to process the image varies with the number of faces detected.
R Copies created with B RED EYE REMOVAL are indicated by a e icon during playback.
D PROTECT
Protect pictures from accidental deletion.
1 Select D PROTECT in the playback menu.
2 Highlight one of the following options and press MENU/OK:
• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press
MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.
• SET ALL: Protect all pictures.
• RESET ALL: Remove protection from all pictures.
Q Protected pictures will be deleted when the memory card or internal memory is formatted
(P 92).
86
Menus
Using the Menus: Playback Mode
G CROP
Create a cropped copy of the current picture.
1 Display the desired picture.
2 Select G CROP in the playback menu.
3 Use the zoom control to zoom in and out and use the selector to scroll the picture until the
desired portion is displayed.
4 Press MENU/OK to display a confirmation dialog.
5 Press MENU/OK again to save the cropped copy to a separate file.
R Larger crops produce larger copies; all copies have an aspect ratio of 4 : 3. If the size of the final
copy will be a, YES will be displayed in yellow.
O RESIZE
Create a small copy of the current picture.
1 Display the desired picture.
2 Select O RESIZE in the playback menu.
3 Highlight a size and press MENU/OK to display a confirmation dialog.
4 Press MENU/OK to save the resized copy to a separate file.
R The sizes available vary with the size of the original image.
Menus
87
Using the Menus: Playback Mode
C IMAGE ROTATE
Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD
monitor.
1 Display the desired picture.
2 Select C IMAGE ROTATE in the playback menu.
3 Press the selector down to rotate the picture 90 ° clockwise, up to rotate it 90 ° counterclockwise.
4 Press MENU/OK. The picture automatically be displayed in the selected orientation whenever
it is played back on the camera.
R Protected pictures can not be rotated. Remove protection before rotating pictures (P
( 86).).
R The camera may not be able to rotate pictures created with other devices.
E COPY
Copy pictures from internal memory to a memory card.
1 Select E COPY in the playback menu.
2 Highlight one of the following options and press the selector right:
• a INTERNAL MEMORY y b CARD: Copy pictures from internal memory to a memory card.
• b CARD y a INTERNAL MEMORY: Copy pictures from a memory card to internal memory.
3 Highlight one of the following options and press MENU/OK:
• FRAME: Copy selected pictures. Press the selector left or right to view pictures and press
MENU/OK to copy the current picture.
• ALL FRAMES: Copy all pictures.
R Copying ends when the destination is full.
R DPOF print information is not copied (P
( 65).).
88
Menus
Using the Menus: Playback Mode
K PRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridge-compatible devices (P 65).
J DISP ASPECT
Choose how High Definition (HD) devices display pictures with an aspect ratio of 4 : 3 (this option
is available only when an HDMI cable is connected). Select 16 : 9 to display the image so that it
fills the screen with its top and bottom cropped out, 4 : 3 to display the entire image with black
bands at either side.
16 : 9
4:3
16 : 9
4:3
R Photographs with an aspect ratio of 16 : 9 are displayed full screen, those with an aspect ratio
of 3 : 2 in a black frame.
Menus
89
The Setup Menu
Using the Setup Menu
1 Display the setup menu.
1.1 Press MENU/OK to display the menu for the current mode.
1.2 Press the selector left to highlight the tab for
the current menu.
SET-UP
SET
SET
EXIT
tab
1.3 Press the selector down to highlight X.
1.4 Press the selector right to place the cursor in the setup menu.
2 Adjust settings.
Highlight items and press the selector right to view options, then highlight
an option and press MENU/OK. Press DISP/BACK to exit when settings are
complete.
90
Menus
The Setup Menu
Setup Menu Options
F DATE/TIME
Set the camera clock (P 18).
N TIME DIFFERENCE
(defaults to h)
Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between local time and your home time zone:
1 Highlight g LOCAL and press the selector right.
2 Use the selector to choose the time difference between local time and your home time zone
in increments of 15 minutes.
3 Press MENU/OK.
To switch between local time and your home time zone, highlight g LOCAL or h HOME and
press MENU/OK.
Option
h HOME
g LOCAL
Description
Switch to the time currently selected for F DATE/TIME (see above).
Switch to local time. If this option is selected, g and the time and date will be
displayed in yellow for three seconds each time the camera is turned on.
La
Choose a language (P 121).
(defaults to ENGLISH)
(defaults to OFF)
o SILENT MODE
Select ON to disable the speaker, flash, and LED illuminator in situations in which camera sounds
or lights may be unwelcome (note that the flash will still fire in C mode).
Menus
91
The Setup Menu
R RESET
Reset all settings except F DATE/TIME, N TIME DIFFERENCE, and Q VIDEO SYSTEM to default values.
1 Highlight R RESET and press the selector right to display a confirmation dialog.
2 Highlight OK and press MENU/OK.
K FORMAT
If a memory card is inserted in the camera, this option will format the memory card. If no memory card is inserted, this option will format internal memory. Select OK to begin formatting.
Q All data—including protected pictures—will be deleted from the memory card or internal
memory. Be sure important files have been copied to a computer or other storage device.
Q Do not open the battery cover during formatting.
A IMAGE DISP.
Choose how long pictures are displayed in the LCD monitor after shooting.
Option
3 SEC
1.5 SEC
ZOOM (CONTINUOUS)
OFF
(defaults to 1.5 SEC)
Description
Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).
Colors may differ slightly from those in the final image.
Pictures are displayed until the MENU/OK button is pressed.
Pictures are not displayed after shooting.
R OFF has no effect in continuous shooting mode.
92
Menus
The Setup Menu
(defaults to CONT.)
B FRAME NO.
New pictures are stored in image files named using a four-digit file
Frame number
number assigned by adding one to the last file number used. The file
100-0001
number is displayed during playback as shown at right. B FRAME NO.
controls whether file numbering is reset to 0001 when a new memory Directory
File
card is inserted or the current memory card or internal memory is for- number
number
matted.
Option
CONTINUOUS
RENEW
Description
Numbering continues from the last file number used or the first available file
number, whichever is higher. Choose this option to reduce the number of pictures with duplicate file names.
Numbering is reset to 0001 after formatting or when a new memory card is
inserted.
R If the frame number reaches 999-9999, the shutter release will be disabled (P
( 112).
R Selecting R RESET ((P 92) sets B FRAME NO. to CONTINUOUS but does not reset the file
number.
R Frame numbers for pictures taken with other cameras may differ.
Menus
93
The Setup Menu
G OPERATION VOL.
(defaults to c)
Adjust the volume of the sounds produced when camera controls are operated. Choose f
(mute) to disable control sounds.
H SHUTTER VOLUME
(defaults to c)
Adjust the volume of the sounds produced when the shutter is released. Choose f (mute)
to disable the shutter sound.
e SOUND
Choose the sounds used for the shutter, at startup, and for camera controls.
I PLAYBACK VOLUME
Adjust the volume for movie playback.
J LCD BRIGHTNESS
Control the brightness of the display.
Option
AUTO
MANUAL
94
(defaults to i)
(defaults to 7)
(defaults to AUTO)
Description
Display brightness is automatically adjusted during shooting in response to ambient lighting conditions. Brightness is not adjusted during playback.
Press the selector up or down to adjust brightness and then press MENU/OK.
Choose from values between –5 and +5.
Menus
The Setup Menu
E LCD MODE
(defaults to U ON)
Choose whether the display automatically dims to save power in shooting mode. This option
does not take effect during playback.
Option
Description
The display dims to save power if no operations are performed for a few
U POWER SAVE ON seconds. Normal brightness can be restored by pressing the shutter button
halfway.
U POWER SAVE OFF Automatic dimming off.
(defaults to 2 MIN)
M AUTO POWER OFF
Choose the length of time before the camera turns off automatically when no operations are
performed. Shorter times increase battery life; if OFF is selected, the camera must be turned
off manually. Note that in some situations the camera turns off automatically even when OFF
is selected.
L DUAL IS MODE
(defaults to l)
Choose whether image stabilization is performed at all times when the camera is in shooting
mode (l CONTINUOUS), or only when the shutter button is pressed halfway (m SHOOTING
ONLY). Choose OFF to turn image stabilization off when using a tripod.
Menus
95
The Setup Menu
(defaults to ON)
B RED EYE REMOVAL
Choose ON to remove red-eye effects caused by the flash when shooting with Intelligent Face
Detection.
R Red-eye reduction is performed only when a face is detected.
(defaults to OFF)
D DIGITAL ZOOM
If ON is selected, selecting T at the maximum optical zoom position will trigger digital zoom,
further magnifying the image.
The Zoom Indicator
W
T
DIGITAL ZOOM on
Optical zoom
W
Digital zoom
T
DIGITAL ZOOM off
Optical zoom
Q Digital zoom produces lower quality images than optical zoom.
96
Menus
The Setup Menu
p MOVIE ZOOM TYPE
(defaults to D)
Choose the type of zoom available during movie recording: C DIGITAL or D OPTICAL.
R Movies recorded using digital zoom may be slightly “grainy”.
(defaults to OFF)
t SAVE ORIGINAL IMAGE
Choose ON to save unprocessed copies of pictures taken using B RED EYE REMOVAL,
j PRO LOW-LIGHT, or k D-RANGE PRIORITY.
(defaults to ON)
m AUTOROTATE PB (XP150/XP160 Only)
Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.
c GUIDANCE DISPLAY
Choose whether to display tool tips.
Q VIDEO SYSTEM
Choose a video mode for connection to a TV. SECAM is not supported.
Option
NTSC
PAL
Menus
(defaults to ON)
(defaults to NTSC)
Description
Select this mode for connection to video devices in North America, the Caribbean, parts of Latin America, and some East Asian countries.
Select this mode for connection to video devices in the United Kingdom and
much of Europe, Australia, New Zealand, and parts of Asia and Africa.
97
The Setup Menu
U DATE STAMP
Stamp the time and/or date of recording on photographs as they are taken.
Option
R+S
R
OFF
(defaults to OFF)
Description
Stamp new photographs with the date and time of recording.
Stamp new photographs with the date of recording.
Do not stamp the time and date on new photographs.
Q Time and date stamps can not be deleted. Turn U DATE STAMP off to prevent time and date
stamps appearing on new photographs.
Q If the camera clock is not set, you will be prompted to set the clock to the current date and
time (P
(P 18).
Q We recommend that you turn the DPOF “print date” option off when printing images with a
time and date stamp (P
(P 65).
Q Time and date stamps do not appear on movies or panoramas.
R DEMONSTRATION (XP150/XP160 Only)
Choose ON for a GPS demo. This option should normally be left OFF.
98
(defaults to OFF)
Menus
Technical Notes
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other
manufacturers.
DIGITAL CAMERA
■ Printing
FINEPIX XP170
FINEPIX XP150/XP160
FINEPIX XP100/XP110
USB cable
(supplied)
PictBridge-compatible
printer *
■ Audio/Visual
HDMI cable (sold separately)
HDTV *
SD/SDHC/SDXC
memory card
Printer *
A/V cable (optional)
TV *
■ Computer Related
USB cable (supplied)
SD card slot or card reader
Computer *
* Available separately.
99
Optional Accessories
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your
local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_
cameras/index.html.
NP-50: Additional large-capacity NP-50 rechargeable batRechargeable
teries can be purchased as required. Note that the NP-50
Li-ion batteries
may record fewer photos per charge than the NP-50A.
Battery
chargers
BC-45W: Replacement battery chargers can be purchased
as required. The BC-45W charges NP-50A and NP-50 batteries in about 150 minutes at +20 °C (+68 °F).
A/V cable
AV-C1: Use for viewing pictures on TV.
AV-C1
100
Technical Notes
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
If the camera will not be used for an
extended period, remove the battery
and memory card. Do not store or
use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very
high temperatures, such as in a
closed vehicle on a sunny day
• extremely cold
• subject to strong vibration
• exposed to strong magnetic fields,
such as near a broadcasting antenna, power line, radar emitter, motor,
transformer, or magnet
• in contact with volatile chemicals
such as pesticides
• next to rubber or vinyl products
Technical Notes
■ Condensation
Sudden increases in temperature,
such as occur when entering a heated
building on a cold day, can cause condensation inside the camera. If this
occurs, turn the camera off and wait
an hour before turning it on again. If
condensation forms on the memory
card, remove the card and wait for the
condensation to dissipate.
101
Caring for the Camera
Cleaning
Use a blower to remove dust from the protective glass covering the lens and
LCD monitor, then gently wipe with a soft, dry cloth. Any remaining stains can
be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to
which a small amount of lens-cleaning fluid has been applied. Care should
be taken to avoid scratching the protective glass or LCD monitor. The camera
body can be cleaned with a soft, dry cloth. Do not use alcohol, thinner, or
other volatile chemicals.
Traveling
Keep the camera in your carry-on baggage. Checked baggage may suffer
violent shocks that could damage the camera.
102
Technical Notes
Troubleshooting
Problems and Solutions
Water in the Camera
Problem
Water in the camera
Solution
The battery-chamber cover was not fully closed before the camera was immersed, or was opened
under water: Take the camera to a FUJIFILM-authorized service technician for repairs. Do not turn
the camera on.
Power and Battery
Problem
The camera does not
turn on.
•
•
•
•
•
•
The battery runs down
quickly.
•
•
•
•
Solution
The battery is exhausted
exhausted:: Charge the battery or insert a fully-charged spare battery ((P
P 7, 9).
The battery is inserted incorrectly:
incorrectly: Reinsert in the correct orientation (P
(P 10).
The battery-chamber cover is not latched
latched:: Latch the battery-chamber cover (P
(P 12).
The battery is cold
cold:: Warm the battery by placing it in a pocket or other warm place and reinsert
it in the camera immediately before taking a picture.
There is dirt on the battery terminals
terminals:: Clean the terminals with a soft, dry cloth.
Q is selected for shooting mode:
mode: Select B mode to reduce the drain on the battery
(P 24).
x TRACKING is selected for F AF MODE:
MODE: Select a different AF mode (P
(P 79).
The battery has been charged many times
times:: The battery has reached the end of its charging
life. Purchase a new battery.
T PERMANENTLY ON is selected for LOCATION SEARCH:
SEARCH: Select U WHEN
SWITCHED ON or OFF ((P
P 31).
TRACKING DATA is on:
on: Turn TRACKING DATA off (P
(P 34).
103
Problems and Solutions
Problem
Solution
The camera turns off
Charge the battery or insert a fully-charged spare battery ((P
P 7, 9).
suddenly.
Charging does not start. Reinsert the battery in the correct orientation and make sure that the charger is plugged in ((P
P 7).
Charging is slow.
Charge the battery at room temperature (P
(P vi).
• There is dirt on the battery terminals
terminals:: Clean the terminals with a soft, dry cloth.
The charging lamp lights,
• The battery has been charged many times
times:: The battery has reached the end of its chargbut the battery does not
ing life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.
charge.
• The battery is too hot or too cold
cold:: Wait for the battery temperature to stabilize (P
(P 7).
Menus and Displays
Problem
Menus and displays are
not in English.
Solution
Select ENGLISH for L a ((P
P 18, 91).
Shooting
Problem
•
•
•
No picture is taken when
•
the shutter button is
•
pressed.
•
•
104
Solution
Memory is full:
full: Insert a new memory card or delete pictures ((P
P 11, 47).
Memory is not formatted:
formatted: Format the memory card or internal memory ((P
P 92).
There is dirt on the memory card contacts
contacts:: Clean the contacts with a soft, dry cloth.
The memory card is damaged
damaged:: Insert a new memory card (P
(P 11).
The battery is exhausted
exhausted:: Charge the battery or insert a fully-charged spare battery ((P
P 7, 9).
The camera has turned off automatically:
automatically: Turn the camera on ((P
P 16).
The indicator lamp was orange when you attempted to record a panorama
panorama:: Wait until
the indicator lamps turns off (P
(P 3).
Troubleshooting
Problems and Solutions
Problem
The LCD monitor goes
dark after shooting.
Solution
The LCD monitor may darken while the flash charges. Wait for the flash to charge ((P
P 41).
The camera does not
focus.
• The subject is close to the camera
camera:: Select macro mode (P
(P 40).
• The subject is far away from the camera
camera:: Cancel macro mode (P
(P 40).
• The subject is not suited to autofocus
autofocus:: Use focus lock ((P
P 37).
Macro mode is not
available
Choose a different shooting mode ((P
P 24).
GPS
• The camera is slow to acquire GPS data
data:: Some time may be needed to acquire GPS data immediately after the camera or LOCATION SEARCH is turned on or if the camera has been
unable to acquire GPS data for an extended period.
• Location data are incorrect
incorrect:: Select OFF for R DEMONSTRATION ((P
P 98).
Intelligent Face Detection
Choose a different shooting mode ((P
P 24).
is not available.
• The subject’s face is obscured by sunglasses, a hat, long hair, or other objects:
objects: Remove
the obstructions.
• The subject’s face occupies only a small area of the frame
frame:: Change the composition so that
No face is detected.
the subject’s face occupies a larger area of the frame ((P
P 36).
• The subject’s head is tilted or horizontal
horizontal:: Ask the subject to hold their head straight.
• The camera is tilted
tilted:: Keep the camera level (P
(P 20).
• The subject’s face is poorly lit
lit:: Shoot in bright light.
Wrong subject is
The selected subject is closer to the center of the frame than the main subject. Recompose the
selected.
picture or turn face detection off and frame the picture using focus lock (P
(P 37).
Troubleshooting
105
Problems and Solutions
Problem
The flash does not fire.
Some flash modes are
not available.
The flash does not fully
light the subject.
Pictures are blurred.
Pictures are mottled.
Vertical lines appear in
pictures.
106
Solution
• The flash is not available in the current shooting mode
mode:: Choose a different shooting mode
(P 24).
• The battery is exhausted
exhausted:: Charge the battery or insert a fully-charged spare battery ((P
P 7, 9).
• The camera is in continuous mode
mode:: Select OFF for R CONTINUOUS ((P
P 78).
• The camera is in silent mode
mode:: Turn silent mode off (P
(P 91).
• The flash is off (P): Choose a different flash mode ((P
P 41).
• The desired flash mode is not available in the current shooting mode
mode:: Choose a different
shooting mode (P
(P 24).
• The camera is in silent mode
mode:: Turn silent mode off (P
(P 91).
• The subject is not in range of the flash
ash:: Position the subject in range of the flash (P
(P 121).
• The flash window is obstructed
obstructed:: Hold the camera correctly ((P
P 20).
• The protective glass covering the lens is dirty
dirty:: Clean the glass ((P
P 102).
• The protective glass covering the lens is blocked:
blocked: Keep objects away from the lens ((P
P 20).
• s is displayed during shooting and the focus frame is displayed in red:
red: Check focus
before shooting ((P
P 110).
• k is displayed during shooting:
shooting: Use the flash or a tripod (P
(P 42).
• A slow shutter speed is selected at high temperatures:
temperatures: This is normal and does not indicated a malfunction.
• The camera has been used continuously at high temperatures or a temperature warning is displayed:
displayed: Turn the camera off and wait for it to cool down.
The camera has been used continuously at high temperatures. Turn the camera off and wait for
it to cool down.
Troubleshooting
Problems and Solutions
Problem
“Smear” in the form of
vertical purple or white
lines appears in the
display.
Solution
Vertical purple or white lines may appear after the camera has been used continuously at high
temperatures or when a very bright object is in the frame; this phenomenon is common to all CCD
image sensors and does not indicate a malfunction. These lines are recorded in movies but do not
appear in photographs. Avoid framing bright objects when filming movies.
• u CONTINUOUS is selected for F MOVIE AF MODE
MODE:: Select a different AF mode
Sounds made by the
(P 79).
camera are recorded with
• Zoom was adjusted during shooting
shooting:: Do not adjust zoom during shooting.
movies.
• Intelligent Face Detection is on:
on: Turn Intelligent Face Detection off (P
(P 36).
Playback
Problem
Solution
Pictures are grainy.
The pictures were taken with a different make or model of camera.
Playback zoom is unavailThe current picture is a resized copy with a size of a.
able.
• Playback volume is too low:
low: Adjust playback volume (P
(P 94).
No sound in movie
• The microphone was obstructed
obstructed:: Hold the camera correctly during recording ((P
P 20, 58).
playback.
• The speaker is obstructed
obstructed:: Hold the camera correctly during playback ((P
P 60).
Selected pictures are not Some of the pictures selected for deletion are protected. Remove protection using the device with
deleted.
which it was originally applied (P
(P 86).
File numbering is
The battery-chamber cover was opened while the camera was on. Turn the camera off before
unexpectedly reset.
opening the battery-chamber cover (P
(P 16).
Troubleshooting
107
Problems and Solutions
Connections/Miscellaneous
Problem
No picture or sound.
No color
The computer does not
recognize the camera.
Pictures can not be
printed.
Only one copy is printed/
the date is not printed.
The camera is unresponsive.
The camera does not
function as expected.
No sound.
108
Solution
• The camera is not properly connected
connected:: Connect the camera properly (P
(P 61).
• An A/V cable was connected during movie playback
playback:: Connect the camera once movie playback has ended.
• Input on the television is set to “TV”:
“TV”: Set input to “VIDEO”.
• The camera is not set to the correct video standard:
standard: Match the camera Q VIDEO SYSTEM setting to the TV (P
(P 97).
• The volume on the TV is too low:
low: Adjust the volume.
Match the camera Q VIDEO SYSTEM setting to the TV (P
(P 97).
Be sure the camera and computer are correctly connected ((P
P 71).
• The camera is not properly connected
connected:: Connect the camera correctly (P
(P 63).
• The printer is off: Turn the printer on.
The printer is not PictBridge compatible.
• Temporary camera malfunction:
malfunction: Remove and reinsert the battery (P
(P 9).
• The battery is exhausted
exhausted:: Charge the battery ((P
P 7) or insert a fully-charged spare battery
(P 9).
Remove and reinsert the battery (P
(P 9). If the problem persists, contact your FUJIFILM dealer.
Turn silent mode off (P
(P 91).
Troubleshooting
Problems and Solutions
Problem
Time and date stamps
FinePixViewer can not
be installed or does not
start.
Troubleshooting
Solution
• Time and date stamps are not correct:
correct: Set the camera clock (P
(P 18).
• Time and date stamps appear on photographs
photographs:: Time and date stamps can not be deleted. To
prevent stamps appearing on new photographs, select OFF for U DATE STAMP ((P
P 98).
FinePixViewer does not support Mac OS X version 10.7 or later. Use one of the applications supplied
with Mac OS X or purchase other software.
109
Warning Messages and Displays
The following warnings are displayed in the LCD monitor:
Warning
B ((red
red))
A ((blinks
blinks red)
red)
k
s
(displayed in red with red
focus frame)
frame)
r
Aperture or shutter speed
displayed in red
FOCUS ERROR
TURN OFF THE CAMERA
AND TURN ON AGAIN
LENS CONTROL ERROR
CARD NOT INITIALIZED
PROTECTED CARD
BUSY
110
Description
Low battery. Charge the battery ((P
P 7) or insert a fully-charged spare battery ((P
P 9).
Battery exhausted. Charge the battery (P
(P 7) or insert a fully-charged spare battery ((P
P 9).
Slow shutter speed. Pictures may be blurred; use the flash or a tripod.
The camera can not focus. Try one of the following solutions:
• Use focus lock to focus on another subject at the same distance, then recompose the picture
(P 37).
• Use macro mode to focus when taking close-ups (P
(P 40).
The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject
is dark, use the flash (P
(P 41).
Camera malfunction or moving parts of lens obstructed. Turn the camera off and then on again,
taking care not to touch the lens. If the message persists, contact a FUJIFILM dealer.
• The memory card or internal memory is not formatted or the memory card was formatted in a computer or other device
device:: Format the memory card or internal memory using
the K FORMAT option in the camera setup menu (P
(P 92).
• The memory card contacts require cleaning
cleaning:: Clean the contacts with a soft, dry cloth. If
the message is repeated, format the card (P
(P 92). If the message persists, replace the card.
• Camera malfunction:
malfunction: Contact a FUJIFILM dealer.
The memory card is locked. Unlock the card ((P
P 11).
The memory card is incorrectly formatted. Use the camera to format the card (P
(P 92).
Troubleshooting
Warning Messages and Displays
Warning
p
CARD ERROR
a MEMORY FULL
b MEMORY FULL
INTERNAL MEMORY IS
FULL
INSERT A NEW CARD
WRITE ERROR
READ ERROR
Troubleshooting
Description
Turn the camera off and wait for it to cool. If no action is taken, the camera will turn off automatically.
The memory card is not formatted for use in the camera. Format the card (P
(P 92).
The memory card contacts require cleaning or the memory card is damaged. Clean the contacts
with a soft, dry cloth. If the message is repeated, format the card ((P
P 92). If the message persists,
replace the card.
Incompatible memory card. Use a compatible card (P
(P 14).
Camera malfunction. Contact a FUJIFILM dealer.
The memory card or internal memory is full and pictures can not be recorded or copied. Delete
pictures or insert a memory card with more free space.
• Memory card error or connection error
error:: Reinsert the card or turn the camera off and then
on again. If the message persists, contact a FUJIFILM dealer.
• Not enough memory remaining to record additional pictures
pictures:: Delete pictures or insert
a memory card with more free space.
• The memory card or internal memory is not formatted:
formatted: Format the memory card or
internal memory (P
(P 92).
• The file is corrupt or was not created with the camera
camera:: The file can not be viewed.
• The memory card contacts require cleaning
cleaning:: Clean the contacts with a soft, dry cloth. If
the message is repeated, format the card (P
(P 92). If the message persists, replace the card.
• Camera malfunction:
malfunction: Contact a FUJIFILM dealer.
111
Warning Messages and Displays
Warning
FRAME NO. FULL
Description
The camera has run out of frame numbers (current frame number is 999-9999). Format the
memory card and select RENEW for B FRAME NO. in the setup menu. Take a picture
to reset frame numbering to 100-0001, then select CONTINUOUS for B FRAME NO.
(P 93).
PRESS AND HOLD
An attempt was made to choose a flash mode or adjust the volume with the camera in silent
THE DISP BUTTON TO
mode. Exit silent mode before choosing a flash mode or adjusting the volume ((P
P 91).
DEACTIVATE SILENT MODE
A search has returned more than 5,000 results, or more than 999 frames were selected for deleTOO MANY FRAMES
tion. Perform a different search or select fewer pictures.
PROTECTED FRAME
An attempt was made to delete to a protected picture. Remove protection and try again (P
(P 86).
a pictures can not be cropped.
a CAN NOT CROP
CAN NOT CROP
The picture is damaged or was not created with the camera.
P CANNOT EXECUTE
An attempt was made to create a resized copy at a size equal to or larger than the original.
Q CANNOT EXECUTE
Choose a smaller size.
a CANNOT EXECUTE
CAN NOT ROTATE
An attempt was made to rotate a picture that can not be rotated.
F CAN NOT ROTATE Movies can not be rotated.
CANNOT EXECUTE
Retouch and red-eye removal are not available with movies, pictures taken with other cameras,
F CANNOT EXECUTE or pictures that can not be played back.
112
Troubleshooting
Warning Messages and Displays
Warning
NO CARD
b NO IMAGE
a NO IMAGE
Description
No memory card inserted when E COPY is selected in the playback menu. Insert a memory
card.
The source selected for E COPY contains no images. Select a different source.
The DPOF print order on the current memory card contains more than 999 images. Copy the
pictures to internal memory and create a new print order.
CAN NOT SET DPOF
The picture can not be printed using DPOF.
F CAN NOT SET DPOF Movies can not be printed using DPOF.
A connection error occurred while pictures were being printed or copied to a computer or other
COMMUNICATION ERROR
device. Confirm that the device is turned on and that the USB cable is connected.
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details).
PRINTER ERROR
To resume printing, turn the printer off and then turn it back on.
PRINTER ERROR
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If
RESUME?
printing does not resume automatically, press MENU/OK to resume.
An attempt was made to print a movie, a picture not created with the camera, or a picture in a
format not supported by the printer. Movies and some pictures created with other devices can
CANNOT BE PRINTED not be printed; if the picture is a still picture created with the camera, check the printer manual
to confirm that the printer supports the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures
can not be printed.
DPOF FILE ERROR
Troubleshooting
113
Appendix
Tips and Tricks
The following tips and tricks will help you get the most from your camera.
Battery Performance
Choose the following settings for improved battery performance:
• LOCATION SEARCH (P 32, 53): OFF
• TRACKING DATA (P 32, 53): OFF
• b FACE DETECTION (P 78): OFF
• F AF MODE (P 79): r CENTER
• q LED ILLUMINATOR (P 80): OFF
• E LCD MODE (P 95): U POWER SAVE ON
• L DUAL IS MODE (P 95): OFF
The Self-timer
• To prevent blur caused by the camera moving when the shutter button is pressed,
use the two-second timer.
• To take a group portrait that includes the photographer, use the group timer. The timer
will not start until the person who has pressed the shutter button appears in the
frame.
114
Tips and Tricks
Intelligent Face Detection
When ON is selected for b FACE DETECTION (P 78), you can:
• Zoom in on faces when ZOOM (CONTINUOUS) is selected for A IMShooting
AGE DISP. (P 92).
• Remove red-eye by selecting ON for B RED EYE REMOVAL (P 96).
• Zoom in on faces during slide shows (P 85) or by pressing the selector
Playback
down during playback.
• Search for faces using b IMAGE SEARCH (P 48).
• Crop the background from portraits using G CROP (P 87).
• Print one copy for each person in the photo.
Printing
Appendix
115
Tips and Tricks
Pro Tips
• To photograph the same scene both with and without the
flash, select C NATURAL & N for A SHOOTING MODE
(P 25). Use multi-frame playback (P 46) to compare the two
shots.
• To photograph subjects that are in motion, select x TRACKING for F AF MODE (P 79).
• To photograph poorly-lit subjects close to the camera, select
ON for q LED ILLUMINATOR (P 80).
• To fine-tune brightness of a photograph, select P PROGRAM
AE (P 25) for A SHOOTING MODE, choose an appropriate
white balance option (P 77), and adjust exposure compensation (P 39).
116
Appendix
Internal Memory/Memory Card Capacity
The following table shows the recording time or number of pictures available
at different image sizes. All figures are approximate; file size varies with the
scene recorded, producing wide variations in the number of files that can be
stored. The number of exposures or length remaining may not diminish at an
even rate. A limited number of test pictures can be taken when no memory
card is inserted.
■ FinePix XP150/XP160
Medium
O
T
O 4 : 3
Photographs
O 3 : 2
O 16 : 9
P 4 : 3
P 16 : 9
Q 4 : 3
Q 16 : 9
i 1920 1
h 1280 1
Movies
f2
k 640 × 480 3
k 320 × 240 3
k 320 × 240 3
Internal memory
(approx. 47 MB)
FINE
NORMAL
7
14
7
16
9
18
14
28
19
37
34
57
50
71
—
—
1 min. 39 sec.
—
—
—
4 GB
FINE
650
720
810
1250
1660
2900
4260
NORMAL
1220
1400
1560
2450
3130
4900
6120
34 min.
69 min.
147 min.
69 min.
192 min.
96 min.
8 GB
FINE
1290
1430
1610
2480
3280
5740
8420
NORMAL
2420
2760
3100
4840
6200
9690
12110
51 min.
104 min.
222 min.
146 min.
291 min.
145 min.
1 Use a G card or better. Individual movies can not exceed 29 minutes in length. FULL HD
and HD movies can not be recorded to internal memory.
2 Individual movies can not exceed 115 minutes in length.
3 Use a G card or better. Individual movies can not exceed 30 seconds in length.
Appendix
117
Internal Memory/Memory Card Capacity
■ FinePix XP170/XP100/XP110
Medium
O
T
O 4 : 3
Photographs
O 3 : 2
O 16 : 9
P 4 : 3
P 16 : 9
Q 4 : 3
Q 16 : 9
i 1920 1
h 1280 1
Movies
f2
k 640 × 480 3
k 320 × 240 3
k 320 × 240 3
Internal memory
(approx. 95 MB)
FINE
NORMAL
15
29
17
33
20
37
31
59
41
76
70
120
104
150
—
—
3 min. 11 sec.
—
—
—
4 GB
FINE
650
720
810
1250
1660
2900
4260
NORMAL
1220
1400
1560
2450
3130
4900
6120
34 min.
69 min.
147 min.
69 min.
192 min.
96 min.
8 GB
FINE
1290
1430
1610
2480
3280
5740
8420
NORMAL
2420
2760
3100
4840
6200
9690
12110
51 min.
104 min.
222 min.
146 min.
291 min.
145 min.
1 Use a G card or better. Individual movies can not exceed 29 minutes in length. FULL HD
and HD movies can not be recorded to internal memory.
2 Individual movies can not exceed 115 minutes in length.
3 Use a G card or better. Individual movies can not exceed 30 seconds in length.
118
Appendix
Specifications
System
Model
Effective pixels
CCD
Storage media
File system
File format
Image size (pixels)
Lens
Focal length
Digital zoom
Aperture
Focus range
(distance from front of lens)
Appendix
Digital Camera FinePix XP170, XP150/XP160, XP100/XP110
14.4 million
1/2.3 -in. square pixel CMOS with primary color filter
• Internal memory
• SD/SDHC/SDXC memory cards
XP150/XP160:: approx. 47 MB
XP150/XP160
XP170/XP100/XP110:: approx. 95 MB
XP170/XP100/XP110
Compliant with Design Rule for Camera File System (DCF)
(DCF),, Exif 2.3, and Digital Print Order
Format (DPOF)
• Still pictures:
pictures: Exif 2.3 JPEG (compressed)
• Movies
Movies:: MOV (H.264)
• O 4 : 3:
3: 4,320 × 3,240
• O 16 : 9:
9: 4,320 × 2,432 • O 3 : 2:
2: 4,320 × 2,880
• P 4 : 3:
3: 3,072 × 2,304
• P 16 : 9:
9: 3,072 × 1,728
• Q 4 : 3:
3: 2,048 × 1,536
• Q 16 : 9:
9: 1,920 × 1,080
Fujinon 5 × optical zoom lens, F3.9 (wide angle) – F4.9 (telephoto)
f=5.0 mm–25.0 mm (35-mm format equivalent: 28 mm–140 mm)
• 4 : 3:
3: Approx. 6.8 × (up to 34 × when combined with optical zoom)
• 16 : 9:
9: Approx. 5.1 × (up to 25 × when combined with optical zoom)
F3.9/F6.2 (wide angle), F4.9/F8.0 (telephoto)
Approx. 60 cm (2.0 ft.)–infinity (wide angle);
angle); 1.0 m (3.3 ft.)–infinity (telephoto)
• Macro
Macro:: approx. 9 cm–80 cm/3.5 in.–2.6 ft. (wide angle);
angle); 40 cm–80 cm/1.3 ft.–2.6 ft. (telephoto)
119
Specifications
System
Sensitivity
Metering
Exposure control
Exposure compensation
Image stabilization
Shutter speed
(combined mechanical and
electronic shutter)
Continuous
Focus
White balance
Self-timer
120
Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200; AUTO
256-segment throughhrough-tthehe-llens (TTL)
(TTL);; MULTI
Programmed AE
–2 EV – +2 EV in increments of 1/3 EV
Optical stabilization
• AUTO mode:
mode: 1/4 s–
s–11/2,000 s
• Other modes:
modes: 4 s–1
s–1/2,000 s
• I: up to 3 fps; max. 12 frames
• K: up to 5 fps; max. 12 frames
• J: up to 10 fps; max. 12 frames
• L: up to 3 fps; last 12 frames recorded
• N: up to 5 fps; last 12 frames recorded
• M: up to 10 fps; last 12 frames recorded
• Mode
Mode:: Single AF, continuous AF
• Focus-area selection
selection:: CENTER, TRACKING
• Autofocus system:
system: Contrast-detect TTL AF
Auto, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white fluorescent, incandescent
Off, 2 sec., 10 sec., a (COUPLE TIMER),
TIMER), g ((GROUP
GROUP TIMER)
TIMER)
Appendix
Specifications
System
Flash
Auto flash; effective range when sensitivity is set to AUTO is approx. 70 cm–3.1 m/2.3 ft.–
10.2 ft. (wide angle),
angle), 70 cm–2.7 m/2.3 ft.–8.9 ft. (telephoto)
(telephoto);; effective range in macro mode is
approx. 30 cm–80 cm/1.0 ft.–2.6 ft.
Flash mode
Auto, fill flash, off, slow sync (red-eye removal off );); auto with red-eye removal, fill flash with redeye removal, off, slow sync with red-eye removal (red-eye removal on)
LCD monitor
2.7-in., 230 k-dot color LCD monitor; frame coverage approx. 96 %
Movies
• i 1920
1920:: 1,920 × 1,080 (1080p)
(1080p),, 30 fps
• h 1280
1280:: 1,280 × 720 (720p)
(720p),, 30 fps
• f: 640 × 480 (VGA)
(VGA),, 30 fps
• k 640
640×
×480
480:: 80 fps
• k 320
320×
×240
240:: 160 fps
• k 320
320×
×240
240:: 240 fps
Note:: i, h, and f movies are recorded with monaural sound.
Note
Languages
Arabic, Bulgarian, Simplified Chinese, Traditional Chinese, Czech, Danish, Dutch, English, Farsi,
Finnish, French, German, Greek, Hebrew, Hungarian, Indonesian, Italian, Japanese, Kazakh,
Korean, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian,
Slovak, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese
Date map database was October 2010
created
(XP150/XP160 only)
Input/output terminals
A/V OUT
NTSC or PAL output with monaural sound
(audio/video output)
Digital input/output
USB 2.0 High-Speed; shares A/V OUT connector, MTP/PTP
HDMI output
Micro HDMI connector
Appendix
121
Specifications
Power supply/other
Power supply
NP-50A rechargeable battery
Battery life (approximate
Battery type
Approximate number of frames
number of frames that can
NP-50A (type supplied with camera)
300
be taken with a fully-charged
battery)
CIPA standard, measured in B (auto) mode using battery supplied with camera and SD memory card.
Camera dimensions
(W × H × D)
Shooting weight
Camera weight
Operating conditions
Note: Number of shots that can be taken with battery varies with battery charge level and will
Note:
decline at low temperatures.
102.7 mm × 71.3 mm × 27.4 mm/4.0 in. × 2.8 in. × 1.0 in., excluding projections
•
•
•
•
•
•
•
XP170/XP150/XP160: Approx. 205 g/7.2 oz., including battery and memory card
XP170/XP150/XP160:
XP100/XP110:: Approx. 195 g/6.8 oz., including battery and memory card
XP100/XP110
XP170:: Approx. 180 g/6.3 oz., excluding battery, accessories, and memory card
XP170
XP150/XP160:: Approx. 185 g/6.5 oz., excluding battery, accessories, and memory card
XP150/XP160
XP100/XP110:: Approx. 175 g/6.1 oz., excluding battery, accessories, and memory card
XP100/XP110
Temperature:: –10 °C – +40 °C/+14 °F – +104 °F
Temperature
Humidity:: 10% – 80% (no condensation)
Humidity
Wireless transmitter (XP170 only)
Standards
IEEE 802.11b/g/n (standard wireless protocol)
Operating frequency
• U. S. A., Canada, Taiwan:
Taiwan: 2,412 MHz–2,462 MHz (11 channels)
• Other countries:
countries: 2,412 MHz–2,472 MHz (13 channels)
Access protocols
Infrastructure
122
Appendix
Specifications
NP-50A rechargeable battery
Nominal voltage
DC 3.7 V
Nominal capacity
1000 mAh
Operating temperature 0 °C – +40 °C/+32 °F – +104 °F
Dimensions (W × H × D) 35.4 mm × 40.0 mm × 6.6 mm/1.3 in. × 1.5 in. × 0.2 in.
Weight
Approx. 20 g/0.7 oz.
BC-50A battery charger
Rated input
Input capacity
Rated output
Supported batteries
Charging time
Operating temperature
Dimensions (W × H × D)
Weight
100 V–240 V AC, 50/60 Hz
5.5 V (100 V/240 VA)
4.2 V DC, 550 mA
NP-50A and NP-50 rechargeable batteries
Approx. 180 minutes (+20 °C/+68 °F)
0 °C – +40 °C/+32 °F – +104 °F
48 mm × 94 mm × 26 mm/1.8 in. × 3.7 in. × 1.0 in., excluding projections
Approx. 65 g/2.2 oz., excluding battery
Weight and dimensions vary with the country or region of sale.
Appendix
123
Specifications
■ Notices
• Specifications subject to change without notice. FUJIFILM shall not be held liable for
damages resulting from errors in this manual.
• Although the LCD monitor is manufactured using advanced high-precision technology, small bright points and anomalous colors may appear, particularly in the vicinity
of text. This is normal for this type of LCD monitor and does not indicate a malfunction; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g.,
electric fields, static electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images.
This is normal.
124
Appendix
q Uploading Pictures to a Smartphone (Tablet) (XP170 Only)
To upload pictures to a smartphone over a wireless network:
1 Start the FUJIFILM Photo Receiver app on your smartphone. For information on downloading the free FUJIFILM Photo Receiver app, visit:
http://app.fujifilm-dsc.com/
2 Display a still picture and press the q button on
the camera and tap q icon on the smartphone
(movies can not be selected for upload).
3 When the smartphone is detected, the camera will display a message. Verify the destination on both the camera and smartphone and press MENU/OK.
WIRELESS IMAGE TRANSFER
SMARTPHONE-123456
SEND OK?
FUJIFILM-XXXX-1234
TRANSMIT
4 When upload is complete, the camera will display the
message “TRANSMISSION COMPLETED”. Press the selector left or right to view more images and press MENU/OK
to upload additional still pictures, or press DISP/BACK to
terminate the connection.
CANCEL
WIRELESS IMAGE TRANSFER
100-0200
TRANSMIT
CANCEL
SMARTPHONE-123456
125
q Uploading Pictures to a Smartphone (Tablet) (XP170 Only)
R Be sure that the battery is charged before beginning upload. Do not remove the
battery, turn the camera off, or remove the memory card until upload is complete.
R If you are unable to upload still pictures, check the smartphone’s settings.
R Personal information may be revealed by the titles, dates, GPS data (where applicable), and other information included with pictures. Verify the destination before
beginning upload.
R The time needed for upload varies with file size and the distance to the destination.
At default settings (recommended), ON is selected for q WIRELESS SETTING >
RESIZE IMAGE ON SENDING H and images are resized to H for upload (the setting can be changed from the setup menu).
R The camera may be unable to upload images created or modified on other devices.
R The camera can connect to only one smartphone at a time.
R Upload may not succeed depending on signal quality.
R The camera will end the connection to the smartphone automatically if no operations are performed for a set period.
126
q Uploading Pictures to a Smartphone (Tablet) (XP170 Only)
Playback Menu Options
q WIRELESS IMAGE TRANSFER
Upload pictures to a smartphone over a wireless network (P 125).
Setup Menu Options
q WIRELESS SETTING
Adjust settings for connection to a smartphone over a wireless network.
• NAME: Enter a name for the camera (the default name is unique to the camera).
• RESIZE IMAGE ON SENDING H: Choose ON (the default setting, recommended in most circumstances) to resize larger images to H for upload, OFF to upload images at their original
size. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.
127
Problems and Solutions
Connections/Miscellaneous
Problem
Problem connecting or
uploading pictures to
smartphone.
Can not upload images.
Smartphone will not
display pictures.
128
Solution
• The smartphone is too far away:
away: Move the devices closer.
• Nearby devices are causing radio interference:
interference: Move the camera and smartphone away
from microwave ovens or cordless phones.
• The smartphone is connected to another device:
device: The smartphone and camera can connect
to only one device at a time. End the connection and try again.
• Are there several smartphones in the vicinity
vicinity:: Try connecting again. The presence of multiple smartphones can make connection difficult.
The current image is a movie or was created on another device and can not be uploaded to a smartphone.
Select ON for WIRELESS SETTING >
SETTING > RESIZE IMAGE ON SENDING H. Selecting OFF increases upload times for larger images; in addition, some phones may not display images over a certain size.
IMPORTANT: Read the following notices before using the camera’s
Wireless Network Devices: Cautions
built-in wireless transmitter.
• This device operates on the same frequency as commercial, educational,
Q This product, which contains encryption function developed in
and medical devices and wireless transmitters. It also operates on the
the United States, is controlled by the United States Export Adminsame frequency as licensed transmitters and special unlicensed lowistration Regulations and may not be exported or re-exported to
voltage transmitters used in RFID tracking systems for assembly lines
any country to which the United States embargoes goods.
and in other similar applications.
• Use only as part of a wireless network. FUJIFILM does not accept li- • To prevent interference with the above devices, observe the following
precautions. Confirm that the RFID transmitter is not in operaability for damages resulting from unauthorized use. Do not use
tion before using this device. Should you observe that the device
in applications requiring a high degree of reliability, for example
causes interference in licensed transmitters used for RFID tracking,
in medical devices or other systems that may directly or indirectly
immediately choose a new operating frequency for this device to
impact human life. When using the device in computer and other
prevent additional interference. If you notice that this device causes
systems that demand a greater degree of reliability than wireless
interference in low-voltage RFID tracing systems, contact a FUJIFILM
networks, be sure to take all necessary precautions to ensure safety
representative.
and prevent malfunction.
• Use only in the country in which the device was purchased. This device
conforms to regulations governing wireless network devices in the
country in which it was purchased. Observe all location regulations
when using the device. FUJIFILM does not accept liability for problems arising from use in other jurisdictions.
• Wireless data (images) may be intercepted by third parties. The security
of data transmitted over wireless networks is not guaranteed.
• Do not use the device in locations subject to magnetic fields, static electricity, or radio interference. Do not use the transmitter in the vicinity of
microwave ovens or in other locations subject to magnetic fields,
static electricity, or radio interference that may prevent reception of
wireless signals. Mutual interference may occur when the transmitter is used in the vicinity of other wireless devices operating in the
2.4 GHz band.
• The wireless transmitter operates in the 2.4 GHz band using DSSS and
OFDM modulation.
129
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Restrictions on Camera Settings
The options available in each shooting mode are listed below.
QB P
AUTO ✔ ✔ ✔
BOFF N ✔ ✔ ✔
O
✔
N
K ✔ ✔ ✔
BON L ✔ ✔ ✔
M
✔
P
✔ ✔ ✔
S/R ✔ ✔ ✔
h
a/g ✔ ✔ ✔
F
✔ ✔
F
H
✔ ✔
d
✔
AUTO ✔1 ✔1 ✔
3200
✔
1600
✔
800
N
✔
400
✔
200
✔
100
✔
O ✔ ✔ ✔
O
P ✔ ✔ ✔
Q ✔ ✔ ✔
T
✔ ✔ ✔
c ✔ ✔ ✔
a
✔ ✔
P
b ✔ ✔ ✔
f ✔ ✔ ✔
D
✔
Option
j kCD L
✔
✔1
✔
✔
✔
1
✔
✔
✔
✔1 ✔1
✔1 ✔
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔1
Shooting Mode
Z M r N O HQR
✔
✔
✔
✔
✔
✔ ✔
✔
✔ ✔
✔
✔
✔
✔ ✔
✔
✔ ✔
✔ ✔1 ✔1 ✔ ✔ ✔ ✔ ✔
✔ ✔
✔ ✔ ✔ ✔ ✔
✔
✔ ✔ ✔ ✔
S F t s U VWF
✔ ✔ ✔ ✔ ✔1
✔ ✔ ✔ ✔
✔
✔
✔
✔1
✔ ✔ ✔ ✔
✔1 ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔
✔
✔1
✔1 ✔1
✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
✔1
✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔
✔ ✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔
Restrictions on Camera Settings
Option
M
N
L
R
J
K
I
OFF
ON
b
OFF
r
F
x
i 1920
h 1280
f
W
640×480
k 320×240
320×240
r
F
(F)
u
q
l
L
m
OFF
D
M
B
E
QB
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
✔
✔
P j kCD
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔
✔ ✔ ✔ ✔ ✔
✔ ✔1 ✔1 ✔1 ✔1
✔
L
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔1
Z
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔1
Shooting Mode
M r N O HQR S F
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔
✔1 ✔1 ✔1 ✔ ✔ ✔ ✔ ✔ ✔1
✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
t
✔
✔
✔
✔
✔
✔
✔
s
✔
✔
✔
✔
✔
✔
✔
U
✔
✔
✔
✔
✔
✔
✔
✔
✔1 ✔1 ✔
✔1 ✔1 ✔1
V
✔
✔
✔
✔
✔
✔
✔
WF
✔
✔
✔
✔
✔
✔
✔
✔1 ✔1
✔1 ✔1
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔2
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔ ✔
1 Automatically optimized for selected shooting mode.
2 OFF only.
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔