Owner`s manual | FujiFilm Z200fd Digital Camera User Manual

Getting Ready
Using the Camera
Advanced Features •
Photography
• Playback
OWNER’S MANUAL
This manual will show you how to use
your FUJIFILM DIGITAL CAMERA
FinePix Z200fd correctly.
Please follow the instructions carefully.
• Movie
Settings
Camera Connection
Software
Installation
Appendices
Troubleshooting
BL00752-201(1)
Warning
To prevent fire or shock hazard, do not expose the unit to rain
or moisture.
For customers in the U.S.A.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for
help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void the user’s authority to operate
the equipment.
Notes on the Grant:
To comply with Part 15 of the FCC Rules, this product must be used
with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC
supply cord.
2
For customers in Canada
CAUTION
This Class B digital apparatus complies with Canadian ICES-003.
Please read the Safety Notes (Basic Manual) and
make sure you understand them before using the
camera.
Perchlorate Material-special handling may apply,
See http://www.dtsc.ca.gov/hazardouswaste/
perchlorate.
IMPORTANT
NOTICE
BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM
Corporation, PLEASE READ THIS END USER LICENSE AGREEMENT
CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,
SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.
BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE
BOUND BY THIS AGREEMENT.
End User License Agreement
This End User License Agreement (“Agreement”) is an agreement between
FUJIFILM Corporation (“FUJIFILM”) and you, which sets forth the terms
and conditions of the license granted for you to use the software provided
by FUJIFILM.
The CD-ROM contains third party software. In case a separate agreement
is provided by a third party supplier for its software, the provisions of such
separate agreement shall apply to the use of such third party software,
prevailing over those of this Agreement.
1. Definitions.
(a) “Media” means the CD-ROM titled “Software for FinePix”- which is
provided to you together with this Agreement.
(b) “Software” means the software which is recorded on Media.
(c) “Documentation” means the operation manuals of Software and
other related written materials which are provided to you together
with Media.
(d) “Product” means Media (including Software) and Documentation
collectively.
2. Use of Software.
FUJIFILM grants to you a nontransferable, nonexclusive license:
(a) to install one copy of Software onto one computer in binary machine
executable form;
(b) to use Software on the computer onto which Software is installed; and
(c) to make one backup copy of Software.
3. Restrictions.
3.1 You shall not distribute, rent, lease or otherwise transfer all or any
part of Software, Media or Documentation to any third party without
FUJIFILM’s prior written consent. You also shall not sublicense,
assign or otherwise transfer all or any part of the rights granted to
you by FUJIFILM under this Agreement without FUJIFILM’s prior
written consent.
3.2 Except as expressly granted by FUJIFILM hereunder, you shall not
copy or reproduce all or any part of Software or Documentation.
3.3 You shall not modify, adapt or translate Software or Documentation.
You also shall not alter or remove copyright and other proprietary
notices that appear on or in Software or Documentation.
3.4 You shall not, or shall not have any third party, reverse-engineer,
decompile, or disassemble Software.
Be sure to read this page before using the software.
4. Ownership.
All copyrights and other proprietary rights to Software and Documentation are
owned and retained by FUJIFILM or the third party suppliers as indicated on
or in Software or Documentation. Nothing contained herein shall be
construed, expressly or implicitly, as transferring or granting any right, license,
or title to you other than those explicitly granted under this Agreement.
5. Limited Warranty.
FUJIFILM warrants to you that Media is free from any defect in material
and workmanship under normal use for ninety (90) days from the date
of your receipt of Media. Should Media not meet the foregoing warranty,
FUJIFILM shall replace such defective Media with other Media bearing
no defect. FUJIFILM’s entire liability and your sole and exclusive
remedy with regard to any defect in Media shall be expressly limited to
such FUJIFILM’s replacement of Media as provided herein
6. DISCLAIMER OF WARRANTY.
EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES
PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND,
EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,
EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,
INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY
COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER
PROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,
OR FITNESS FOR ANY PARTICULAR PURPOSE.
7. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY
GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,
INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE
USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
8. No export.
You acknowledge that neither Software nor any part thereof, will be
transferred, or exported to any country or used in any manner in violation
of any export control laws and regulations to which Software is subject.
9. Termination.
In case you breach any of the terms and conditions hereof, FUJIFILM
may immediately terminate this Agreement without any notice.
10. Term.
This Agreement is effective until the date when you cease to use
Software, unless earlier terminated in accordance with Section 9 hereof.
11. Obligation upon termination.
Upon termination or expiration of this Agreement, you shall, at your own
responsibility and expense, delete or destroy immediately all Software
(including its copies), Media and Documentation.
12. Governing Law.
This Agreement shall be governed by and construed in accordance with
laws of Japan.
3
EC Declaration of Conformity
We
Name:
Address:
FUJIFILM Electronic Imaging Europe GmbH
Benzstrasse 2
47533 Kleve, Germany
declare that the product
Product Name:
FUJIFILM DIGITAL CAMERA FinePix Z200fd
Manufacturer’s Name:
FUJIFILM Corporation
Manufacturer’s Address: 7-3, AKASAKA 9-CHOME
MINATO-KU, TOKYO 107-0052, JAPAN
conforms to the following Standards:
Safety: EN60065: 2002 + A1
EMC: EN55022: 1998 + A1: 2000 + A2: 2003 Class B
EN55024: 1998 + A1: 2001 + A2: 2003
EN61000-3-2: 2000 + A2: 2005
EN61000-3-3: 1995 + A1: 2001 + A2: 2003
following the provision of the EMC Directive (2004/108/EC) and Low Voltage Directive (2006/95/EC).
Kleve, Germany
May 1, 2008
Place
Date
Signature/Managing Director
This product comes with batteries. When these are empty, you shouldn’t throw them
away but deliver them as domestic chemical refuse.
4
Disposal of Electric and Electronic Equipment in Private Households
Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this
product shall not be treated as household waste.
Instead it should be taken to an applicable collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to
the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local
requirements.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you have purchased the product.
In Countries outside the EU:
If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.
5
Contents
Warning................................................................. 2
IMPORTANT ......................................................... 3
EC Declaration of Conformity................................ 4
Disposal of Electric and Electronic Equipment in
Private Households ......................................... 5
Contents................................................................ 6
About this Manual ................................................. 9
Accessories Included .......................................... 11
Camera Parts and Features................................ 12
Example of LCD Monitor Text Display ................ 13
Getting Ready
Charging the Battery ........................................... 14
Loading the Battery ............................................. 16
Loading the Memory Card................................... 18
Turning On and Off ............................................. 21
Setting the language, date, and time .......... 22
Correcting the Date and Time ............................. 25
Selecting the Language ...................................... 26
Setting Silent Mode ............................................. 27
Using the Camera
6
Taking Pictures (AUTO Mode) ............................ 28
Using Intelligent Face Detection/Red-eye
Removal when taking pictures ................. 32
Using the Dual Image Stabilizer function when
taking pictures .......................................... 33
Using AF/AE lock ........................................ 34
Adjusting the shot composition ................... 36
Viewing the Images............................................. 37
Playback of images in the folder ................. 38
G Erasing the Images/Movies........................... 44
Using the erase button ( /n) ................... 44
Erasing from the [PLAYBACK MENU] ....... 44
Moving or Copying the Images ..................... 47
Advanced Features — Photography
Using the Shooting Functions —
Procedure of Setting .....................................
Setting the Shooting Mode .................................
Setting a Shooting mode suited to the
scene .......................................................
e Macro (Close-up) ...........................................
d Setting the Flash (Intelligent Flash) ................
* Self-Timer ......................................................
Using [SHOOTING MENU] ................................
Setting the [SHOOTING MENU] ................
[SHOOTING MENU]...........................................
Focusing the shot quickly
([
HIGH-SPEED SHOOTING])............
Taking pictures continuously
([
CONTINUOUS]) ..............................
Adjusting exposure compensation
([S EXP. COMPENSATION]) ...............
Adjusting color balance
([T WHITE BALANCE]) ........................
Changing the quality setting
([
QUALITY]) .......................................
Changing the sensitivity setting
([
ISO]) ................................................
Changing the FinePix COLOR setting
([
FinePix COLOR]).............................
Specifying focusing mode
([
AF MODE]) ......................................
51
53
53
59
60
63
67
67
70
70
70
73
74
74
75
76
77
Advanced Features — Playback
[IR MENU] ........................................................... 79
Sending and receiving images
([
IR COMMUNICATION]) ................... 79
Processing, transmitting and saving blog
images ([
TRIMMING FOR BLOG])..... 82
Using [PLAYBACK MENU] ................................. 85
Setting the [PLAYBACK MENU] ................. 85
Setting automatic playback
([
SLIDE SHOW]) ................................ 86
Selecting the type of image transition
([
TRANSITION]) ................................. 86
Rotating the images
([
IMAGE ROTATE]) ............................ 87
Protecting the images
([
PROTECT])...................................... 88
Adding voice memos to the images
([
VOICE MEMO])................................ 89
DPOF set frame
([
PRINT ORDER (DPOF)]) ................. 92
Trimming the images
([
TRIMMING])..................................... 96
Advanced Features — Movie
r Recording Movies .......................................... 98
Changing movie size................................. 100
w Playing Back Movies ................................... 101
Settings
[U SET-UP] .................................................... 102
Using the [SET-UP] menu ........................ 102
SET-UP menu option ............................... 103
Camera Connection
Connecting to a TV........................................... 113
Connecting Camera Directly to Printer —
PictBridge Function..................................... 114
Software Installation
Installation on a Windows PC...........................
Installation on a Mac OS X...............................
Connecting to a PC ..........................................
Using FinePixViewer ................................
118
120
123
126
Appendices
System Expansion Option ................................ 128
Accessories Guide ........................................... 129
Using Your Camera Correctly .......................... 131
Notes on the xD-Picture Card™, the SD Memory
Card and the Internal Memory .................... 132
Warning Displays ............................................. 133
Troubleshooting
Troubleshooting................................................ 138
Specifications ................................................. 146
Explanation of Terms ..................................... 153
FUJIFILM Digital Camera Worldwide
Network..................................................... 154
7
Contents
Usable Memory Cards
You can use the xD-Picture Card, the SD Memory Card and
the SDHC Memory Card with the FinePix Z200fd. In this
manual, these cards are expressed as “Memory Card” and
“SD Memory Card”.
8
About this Manual
Z About marks
CAUTION: This mark denotes issues that may affect the camera’s operation.
CHECK: This mark denotes points to notice in the camera’s operation.
MEMO: This mark denotes additional topics that complement the basic operating procedures.
Z Usable Memory Cards
You can use the xD-Picture Card, the SD Memory Card and the SDHC Memory Card with the FinePix Z200fd. In this manual,
these cards are expressed as “Memory Card” and “SD Memory Card”.
Z 4-direction (nopq) button
Up, down, left, and right are indicated by black triangles in this manual. Up or down is shown as n or o, and left or right is
shown as p or q.
When rotating
:
When pressing q:
When pressing DISP/BACK:
Z About cables
The cables used for FinePix Z200fd are following:
• A/V cable for FinePix Z200fd
• USB cable for FinePix Z200fd
In this manual, these cables are expressed as “A/V cable” and “USB cable”.
Z About the illustration for the LCD monitor display
In this manual, the illustration for the LCD monitor display is simplified.
Continued Q
9
About this Manual
Z Note
In this manual, the menu names or messages displayed in the LCD monitor appear in square brackets([ ]).
Z Using the Wheel Dial
You can select files or menus easier by rotating the wheel dial.
We recommend using the wheel dial to select thumbnails or the top menu, etc.
Selecting thumbnails (➝p.42)
Keep rotating the wheel dial when
reaching the last image in a folder to
move to the next folder.
Selecting menus (➝p.53, 67, 85)
Use mainly when selecting menus in
vertical tree.
MOVIE
Movie recording
with sound.
SET
MENU
AUTO
Automatic mode
setting according to
shooting conditions.
SET
MENU
NATURAL &
2 images shot
continuously without
flash and with flash
SET
10
MENU
Changing folders (➝p.28)
Change the folder by rotating the wheel
dial quickly one time or more.
Accessories Included
• Rechargeable Battery NP-45 (1)
• USB cable (1)
• Strap (1)
• CD-ROM (2)
- Owner’s Manual (this manual)
- Software for FinePix
• Battery Charger BC-45 (1 set)
• Basic Manual (1)
Attaching the strap
• A/V cable (1)
Attach the strap as shown in 1 and 2.
1
2
11
Camera Parts and Features
• Refer to the pages in parentheses for information on using the camera parts or features.
A Shutter button
B ON/OFF switch/Lens cover
C
Intelligent Face Detection/bRed-eye Removal button
(p.32)
D Flash (p.60)
E Microphone
F Infrared port (p.80)
G Lens
H Speaker
I Illumination lamp (p.107)/Self-timer lamp (p.65)
J Indicator lamp (p.31)
K LCD monitor
L Wheel dial/4-direction nopq button (p.9)
M DISP (Display)/BACK button (p.36, 37)
N Tripod mount
O W (Wide zoom) button (p.29, 40)
P T (Tele zoom) button (p.29, 40)
Q
Dual IS button (p.33)
R Multi-connector adapter connection socket
S Strap mount
T MENU/OK button
U w (Playback) button
V DC coupler cable cover
W Battery cover (p.16)
X Battery release catch (p.16)
Y Memory Card slot (p.19)
Z Battery compartment (p.16)
12
Example of LCD Monitor Text Display
Z Photography mode
A
B
Silent mode (p.27)
Intelligent Face Detection
(p.32)
C
Dual IS (p.33)
D s Shooting mode (p.53)
E
Battery level indicator
(p.15)
F
Folder (p.28)
G ( Self-timer (p.63)
H 9 White balance (p.74)
I f Continuous shooting
(p.70)
J AF frame (p.30)
K Date/Time (p.22)
L C Flash (p.60)
M e Macro (close-up) (p.59)
N
N Quality mode (p.74)
O Number of available frames
(p.151)
P
FinePix COLOR (p.76)
Q { AF warning (p.30)
R
Camera shake warning
(p.31)
S Sensitivity (p.75)
T Y Internal memory (p.20)
U
High-speed shooting
(p.70)
V S Exposure compensation
(p.73)
Z Playback mode
A
Intelligent Face Detection
(p.40)
B w Playback mode (p.37)
C
Folder (p.38)
D F Protection (p.88)
E # Voice memo (p.89)
F
Red-eye removal (p.32)
G
Silent mode (p.27)
H Frame number (p.106)
I
Present (p.37)
J u DPOF (p.92)
K
Blog image (p.82)
FinePix Z200fd has internal memory that can store images without Memory Card. Y appears on the LCD monitor when the internal
memory is active.
13
Charging the Battery
The battery is not fully charged at shipment and must be
fully charged before being used.
1
Z Compatible battery
Rechargeable Battery NP-45 (1)
Load the battery in to the battery charger
BC-45.
Set the battery correctly as indicated by the polarity
icon.
Rechargeable
battery NP-45
Battery Charger
BC-45
Terminals
Indicator
2
Connect the battery charger and
connecting cable and plug the connecting
cable into the power outlet.
3
The charging indicator lights red and
charging begins.
CAUTION
• The battery is not fully charged at shipment and must be
fully charged before being used.
• Do not stick labels onto the battery as this could cause
the battery to become jammed inside the camera.
• Any contact between the battery terminals could cause
the battery to short circuit and overheat.
• See “Basic Manual” for information on the battery.
• Always use the Rechargeable Battery NP-45
(included). The use of other brands of rechargeable
battery could cause faults or damage to the camera.
• Do not split or peel outer labels of the battery.
When charging is completed, the indicator turns off.
Charging completes after 180 minutes.
14
Z <Charging Indicator and Statuses>
Status
Checking the battery charge
Action
Battery not loaded
Load the battery to be
charged.
Off
Fully charged
(charging complete)
Remove the battery
from the battery
charger.
Lit red
Charging
Blinking red
Battery fault during
charging
Turn the camera on and check the battery level indicator
on the LCD monitor.
Getting Ready
Charging
Indicator
–
Unplug the battery
charger and remove
the battery from the
battery charger.
CAUTION
• Unplug the battery charger from the power outlet when
it is not in use.
• If the terminals of battery are soiled, it may not be
possible to charge it. Clean the battery terminals and
battery charger terminals with a clean, dry cloth.
• Charging times increase at low temperatures.
• The NP-45 gradually loses its charge even when not
used. Charge a NP-45 just before taking pictures (in the
last day or two).
A There is ample battery charge. (Lit white)
B The battery is almost half charged. (Lit white)
C There is insufficient charge left in the battery. The
battery will soon run out. Have a charged battery
ready. (Lit red)
D The battery is depleted. The display will shortly go
blank and the camera will stop working. Replace or
recharge the battery. (Blinking red)
CAUTION
• Due to the nature of the battery, the battery level
indicator (
,
, or V) may appear early
when the camera is used in cold locations. Try warming
the battery in your pocket or a similar location before
use.
• Battery with no remaining charge (V blinking red)
may cause camera faults. Always load a fully charged
battery.
• Depending on the camera mode, the transition from
to V may occur more quickly.
15
Loading the Battery
Battery is required to operate the digital camera. At first,
load the battery in the camera.
1
Open the battery cover.
2
Load the battery.
While pushing the battery release catch aside, load
the battery by aligning the indicator (A orange) and
the battery indicator (B orange). Check that the
battery is firmly held in place.
CHECK
Check that the camera is turned off before opening the
battery cover.
Battery release catch
CAUTION
• Do not open the battery cover while the camera is on.
This could damage the Memory Card or ruin the image
files on the Memory Card.
• Do not apply force to the battery cover.
Align the orange parts
16
CAUTION
To remove the battery
Close the battery cover.
Open the battery cover, and unlock the battery release catch
with your finger.
Battery release catch
Getting Ready
3
• Load the battery in the correct direction.
• If the battery is loaded with the arrow pointing toward
opposite direction from the camera, or the indicators are
not aligned, it may become jammed and damaged. Use
the battery carefully to avoid overheating, igniting or
exploding.
If the battery is loaded incorrectly, contact a FUJIFILM
dealer. Do not use excessive force to remove the
battery from the camera.
CAUTION
Make sure the camera is turned off before removing the
battery.
MEMO
If you want to use the camera powered by AC, the AC
power adapter, AC-5VX (sold separately), and DC
coupler, CP-45 (sold separately), are necessary. Refer to
the manual provided with the AC-5VX and CP-45 for
instructions.
17
Loading the Memory Card
Although you can store pictures in the camera’s internal
memory, you can store many more images on the
Memory Card (sold separately). You can use an xDPicture Card and SD Memory Card with the FinePix
Z200fd. In this manual, these cards are expressed as
“Memory Card”.
2
Insert an xD-Picture Card.
Gold marking
SD Memory Cards/SDHC Memory Cards
They are operation-checked at FUJIFILM Corporation.
Manufacturer: SanDisk
Gold contact area
MEMO
• Compatible models will be updated in our web site:
http://www.fujifilm.com/products/digital_cameras/
index.html
• Depending on the SD Memory Card, recording of
movies may be interrupted. Use of above mentioned
SD Memory Cards are recommended.
• The camera is not compatible with multimedia cards.
1
Open the battery cover.
Align the gold marking
with the gold contact
area, then insert an
xD-Picture Card
completely.
(SD Memory Card)
Gold marking
Gold contact area
Align the gold marking with the gold contact area, then
insert an SD Memory Card completely.
18
CAUTION
3
Close the battery cover.
Getting Ready
Be sure to unlock the protection of the SD Memory Card
before inserting it. If it is locked, recording/deleting
images, as well as formatting are not available. To unlock
the protection, slide the switch back, and the SD Memory
Card will work normally.
Protection
Switch
How to replace the Memory Card
CAUTION
• A new SD Memory Card or a card previously used on a
PC or any device other than the camera should be
formatted (➝p.110) on the camera before use.
• Do not use a miniSD adaptor or a microSD adaptor
which have exposed contact areas on the back. Use of
these adaptors may cause a malfunction or damage
due to the improper contacts.
A miniSD adaptor or microSD adaptor bigger than SD
Memory Card standard size may become stuck. Pulling
out forcefully may cause a malfunction. In that case,
contact your FUJIFILM dealer.
Push the Memory Card into the slot and then slowly remove
your finger. The lock is released and the Memory Card is
pushed out.
Continued Q
19
Loading the Memory Card
CAUTION
• When storing Memory Cards, make sure that they are
kept out of the reach of children. A Memory Card could
be swallowed and cause suffocation. If a child swallows
a Memory Card, seek medical attention or call
emergency number right away.
• If the Memory Card is oriented incorrectly, it will not go
all the way into the slot. Do not apply force when
inserting a Memory Card.
• Note that the Memory Card may spring out if you
release your finger quickly from the card immediately
after the lock is released.
• Operation of this camera is only guaranteed when it is
used with FUJIFILM xD-Picture Card and operation
checked SD Memory Card. (➝p.18).
• See p.132 for information on the xD-Picture Card and
the internal memory.
MEMO
• The size of an image file varies depending on the
subject. For this reason, the number recorded may not
represent the actual number of frames.
• See p.151 for information on the standard number of
available frames.
20
Z About internal memory
FinePix Z200fd has internal memory that can store
images without Memory Card. Y appears on the LCD
monitor when internal memory is active.
When a Memory Card (sold separately) is inserted
Record images: Record images to a selected folder.
Playback images: Playback images in a selected folder.
When a Memory Card (sold separately) is not inserted
Record images: Record images to internal memory.
Playback images: Playback images in internal memory.
Z About images in the internal memory
Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
CD-R, CD-RW, DVD-R, hard disk, etc.).
It is possible to transfer saved images on the internal
memory to a Memory Card (➝p.47).
CAUTION
Erase the unnecessary images in the internal memory.
(➝p.44)
Turning On and Off
Open the lens cover completely to turn the camera on.
Close the lens cover to turn the camera off.
• Power-ON
• Power-OFF
MEMO
Changes between Shooting mode and Playback
mode
Turning the camera on in
Playback mode
A Leave the lens cover closed.
• Close the lens cover
Getting Ready
Turning the camera on in
Shooting mode
B Press w for about 1 second to turn the camera on in
Playback mode.
Press w during playback to turn the camera off.
Press w during shooting to change to Playback mode.
Press the shutter button down halfway to return to
Shooting mode.
CAUTION
• Take care not to get fingerprints on the camera lens as
this will result in impaired image quality in your shots.
• Press w to activate Playback mode when the lens
cover is open. Press and hold w to turn the camera off.
• Avoid pressing the lens cover to prevent damaging the
surface of the camera.
• The ON/OFF switch does not completely disconnect the
camera from its power supply.
CAUTION
When the lens cover is open, even if you press w, the
power cannot be turned off. Follow the instructions on the
LCD monitor.
MEMO
To change to Shooting mode, open the lens cover
completely so that it will not move further.
21
Turning On and Off
Setting the language, date, and
time
2
Set the date and time.
DATE / TIME NOT SET
When using the camera for the first time after purchasing,
the language, date, and time are cleared. Set the
language, date, and time.
1
2010
2009
YY.MM.DD
2008
1. 1
2007
2006
[
] screen appears when turning
the camera on.
SET
START MENU
/ LANG.
12:00
AM
NO
A Select Year, Month, Day, Hour, or Minute.
B Correct the setting.
SET
NO
MEMO
A Select the language.
B Press MENU/OK to confirm the setting.
22
• Holding down n or o changes the numbers
continuously.
• When the time displayed passes “12”, the AM/PM
setting changes.
• The wheel dial is useful to set the date and time.
4
Change the date format.
Set the [POWER MANAGEMENT] options.
DATE / TIME NOT SET
POWER MANAGEMENT
POWER SAVE
PERFORMANCE UP
DD . MM . YY
MM / DD / YY
12 / 1 / 2008
YY . MM . DD
SET
10:00
AM
Power saving for longer
battery life
SET
NO
NO
A Select the date format.
A Select an option.
B Set the format.
B Press MENU/OK to confirm the setting.
C Always press MENU/OK after the settings
are completed.
Date format
ex. December 1, 2008
[YY.MM.DD]: [2008.12.1]
[MM/DD/YY]: [12/1/2008]
[DD.MM.YY]: [1.12.2008]
Getting Ready
3
MEMO
• [START MENU] screen also appears when the battery
has been removed and the camera has been left for a
long period. Once the AC power adapter has been
connected or the battery has been installed for 10 hours
or more, the camera settings will be retained for roughly
24 hours even if both sources of power are removed.
• [POWER MANAGEMENT] screen appears when:
- [
RESET] in the [SET-UP] menu is performed
(➝p.104).
- [POWER MANAGEMENT] setting is not set.
23
Turning On and Off
Auto power off function
When the Auto power off function is active, if the camera
is left unused for 2 or 5 minutes, this function turns the
camera off (➝p.110). To restore power to the camera to
take pictures, briefly close the lens cover completely and
then reopen it. To play back images, hold down w for
about 1 second.
24
Correcting the Date and Time
Open the [SET-UP] menu.
2
Display the [
DATE/TIME] screen.
Select [
SHOOTING MENU] from the top menu to
display the setting screen.
Setting the [SHOOTING MENU] (➝p.67)
SHOOTING MENU
SET-UP
DATE/TIME
VOLUME
SOUND
BLOG IMAGE SIZE
LCD BRIGHTNESS
Getting Ready
1
HIGH-SPEED SHOOTING
CONTINUOUS
QUALITY
ISO
COLOR
SET-UP
A Select
A Select [U SETUP].
B Press MENU/OK to open the [SET-UP]
menu.
MEMO
The wheel dial is useful to select thumbnails, the top
menu, etc.
.
B Move to menu item.
C Select [
DATE/TIME].
D The [ DATE/TIME] screen appears.
See “2 Set the date and time. ” (➝p.22).
25
Selecting the Language
1
Open the [SET-UP] menu.
2
Display the [
] screen.
Select [
SHOOTING MENU] from the top menu to
display the setting screen.
Setting the [SHOOTING MENU] (➝p.67)
SHOOTING MENU
SET-UP
FORMAT
/LANG.
AUTO POWER OFF
TIME DIFFERENCE
BACKGROUND COLOR
ENGLISH
2 MIN
HIGH-SPEED SHOOTING
CONTINUOUS
QUALITY
ISO
COLOR
SET-UP
A Select
A Select [U SETUP].
B Press MENU/OK to open the [SET-UP]
menu.
.
B Move to menu item.
C Select [
].
D The [
] screen appears.
See “1 [
] screen appears
when turning the camera on.” (➝p.22).
26
Setting Silent Mode
Getting Ready
Set Silent mode pressing and holding DISP/BACK.
Use this mode for taking pictures in places where the use
of flash and making an operation or shutter sound are
restricted.
Flash mode is set to suppressed flash and the operation
sound, shutter sound, playback sound of movies or voice
memo, self-timer lamp and illumination lamp are disabled.
MEMO
• Press and hold DISP/BACK again to release Silent
mode.
• Flash will light only in Natural & d mode.
• Release Silent mode to change flash mode or sound
volume.
27
Taking Pictures (AUTO Mode)
This section describes the basic operations.
Refer to p.51 for setting AUTO Mode.
1
Turn the camera on.
A Open the lens cover completely so that it will not move
further.
2
Select the folder.
You can save images or movies in the folder by
category.
This camera has 5 folders ([
MY PICTURES], [
FAMILY], [
TRAVEL], [
EVENTS], [
FAVORITES]). Select the folder in advance.
• Power-ON
SELECT FOLDER
Select storing
folder
SET
SELECT FOLDER
MY PICTURES
FAMILY
TRAVEL
EVENTS
FAVORITES
INTERNAL MEMORY
MEMO
• If a memory card is not inserted, images or movies are
saved in [INTERNAL MEMORY] folder.
• In Shooting mode, rotate the wheel dial quickly one time
or more for easy access to other folders.
28
Holding the camera correctly
Do not cover the lens or
flash with your fingers.
Check the composition on the LCD monitor.
To adjust zoom scale using the Zoom button:
W button
(Zoom out)
T button
(Zoom in)
Using the Camera
Brace your elbows
against your sides and
hold the camera with both
hands.
3
Zoom bar
CAUTION
• Moving the camera while shooting gives a blurred
picture (camera shake). Hold the camera steadily with
both hands.
• If the lens or flash is obscured by your fingers or the
strap, subjects may be out of focus or the brightness
(exposure) of your shot may be incorrect.
• Check that the lens is clean. If it is dirty (getting
fingerprints on the lens etc.), clean the lens.
MEMO
• Select e Macro mode to take close-up shots (➝p.59).
• Use digital zoom when you want to shoot the subject
closer (➝p.107).
Continued Q
29
Taking Pictures (AUTO Mode)
4
Focus on the main subject in the AF frame
and press the shutter button down halfway.
5
Press the shutter button fully.
Double
beep
Halfway pressed
AF frame
Halfway
pressed
AF frame
becomes smaller
and camera
focuses on the
subject.
CHECK
• Focus on the subject
Double beep is heard
Indicator lamp lit green
• Not focus on the subject
No sound
AF frame lit red
{ indicated
Indicator lamp blinking green
MEMO
The shutter button has a halfway point at which focus and
exposure are automatically optimized before taking the
picture by pressing fully down.
CAUTION
When pressing the shutter button halfway, a lens
operation sound may be heard.
30
Click
Fully pressed
CAUTION
When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
MEMO
• When the subject is not in the AF frame, use AF/AE lock
to take the picture (➝p.34).
• When pressing the shutter button down fully in one
motion, the camera takes the picture without the AF
frame changing.
• When a picture is taken, the illumination lamp on the
front of the camera lights to indicate that shooting is
complete.
• Images are saved in the folder displayed in the top left
of the LCD monitor (➝p.28).
Z Indicator lamp display
The indicator lamp lights or blinks when pressing the shutter
button, etc. The indicator lamp shows the camera status.
Flash
Indicator lamp
Change the flash mode when you want to take pictures without
flash. See p.60 for information on flash.
CAUTION
• The image shown on the LCD monitor before the
picture is taken may differ in brightness, color, etc. from
the image actually recorded. Play back the recorded
image to check it (➝p.37).
• When selecting a slow shutter speed that will cause
camera shake,
appears on the LCD monitor. Use
flash or a tripod.
• See p.133-137 for information on Warning displays.
See “Troubleshooting” (➝p.138-145) for more
information.
Display
Using the Camera
When pressing the shutter
button down halfway, b
appears on the LCD monitor
before the flash fires.
Status
Lit green
Locking the focus
Blinking green
Camera shake warning, AF warning,
or AE warning (ready to shoot)
Blinking green and
orange alternately
Recording to Memory Card or internal
memory (ready to shoot)
Lit orange
Recording to Memory Card or internal
memory (not ready)
Blinking orange
Charging flash (flash will not fire)
Blinking red
• Warnings for Memory Card and
internal memory
Card not formatted, incorrect format,
memory full, Memory Card or
internal memory error
• Lens operation error
MEMO
Detailed warning messages appear on the LCD monitor
(➝p.133-137).
31
Taking Pictures (AUTO Mode)
Using Intelligent Face Detection/
Red-eye Removal when taking
pictures
Intelligent Face Detection allows you to focus on and
adjust the brightness of people’s faces. Intelligent Face
Detection is effective with the camera held horizontally or
vertically.
Available Shooting modes: AUTO,
/,
,
,
,
,
,s
A To activate Intelligent Face Detection, press
turn Intelligent Face Detection off, press
OFF
,
Green frame
, H,
CAUTION
once.To
again.
FACE DETECTION
REMOVAL ON
FACE DETECTION
REMOVAL OFF
Red-eye effect, caused by the light of the flash reflecting
off the inside of the eye, will be corrected automatically
when a picture is taken with [
FACE
DETECTIONbREMOVAL ON] set.
32
When there are multiple
people in the frame,
Intelligent Face Detection
will set a green frame around
the face nearest to the center
of the picture. This face has
focusing priority.
• If the camera or subject moves as the picture is taken,
the subject’s face may move out of the Intelligent Face
Detection frame.
• When the camera is detecting multiple faces, the green
frame is set around the face near the center. If you want
to focus on another subject, move the camera so that
the new subject is in the center of the LCD monitor.
If focus is still not achieved, press
(Intelligent Face
Detection) to turn off the function, and take the picture
using AF/AE lock (➝p.34).
Intelligent Face Detection can focus on a face in a white
frame providing the subjects in the green and white
frame are of the same focal length.
• When the shutter button is pressed halfway with
Intelligent Face Detection off, the focus will be on the
center of the LCD monitor.
• When the shooting mode is set to
or s, the image
will be focused with respect to faces, but because the
exposure will be controlled by the shooting mode, faces
will not be adjusted for optimal exposure.
• If the camera is unable to detect faces in an image, it will
not correct the red eye-effect sufficiently, or not at all.
Also, the camera cannot correct the red-eye effect if the
face is in profile.
B Press the shutter button down fully to take pictures.
Click
CHECK [
FACE DETECTIONbREMOVAL ON]
When a picture is taken with [
FACE DETECTION
bREMOVAL ON] set, the red-eye effect will be detected
and corrected before the image is recorded. When a picture
is taken with [
FACE DETECTION b REMOVAL OFF]
set, the image is recorded without the red-eye effect.
REMOVING
Camera shake and blurring (of moving subject) can be
reduced by the image stabilizer function and a high
sensitivity setting. Both camera shake and blurring are
reduced when B is selected for the shooting mode.
Only camera shake will be reduced when any other
shooting mode is selected.
Available Photography modes: All (except for )
Using the Camera
Fully pressed
Using the Dual Image Stabilizer
function when taking pictures
A Press
to activate Dual IS (image stabilization)
mode. Press
again to set Dual IS mode OFF.
Red-eye effect in an image
will be detected after the
shooting.
or
will be displayed
when Dual IS mode is activated.
Subjects not suitable for Intelligent Face Detection
Intelligent Face Detection automatically focuses on a face(s)
turned towards the camera. However, difficulties will occur with
the Intelligent Face Detection mode in the following situations:
• The face is obscured by glasses, sunglasses, a hat, or hair.
• A person turned sideways, or who has their head tilted.
• The subject is too far away to recognize a face.
Intelligent Face Detection will not work in cases where the
subject is standing on his/her head, is not a person (pet or
other animal), or if the camera is not held correctly.
For such subjects use AF/AE lock (➝p.34).
CHECK
The Dual IS mode can be set to [
[
SHOOTING ONLY] under [
the [SET-UP] menu (➝p.107).
CONTINUOUS] or
DUAL IS MODE] in
Continued Q
33
Taking Pictures (AUTO Mode)
Using AF/AE lock
Click
B Press the shutter button down
fully to take pictures.
Take a picture using AF/AE lock
1
Move the camera slightly so that one of the
subjects is in the AF frame.
AUTO
CAUTION
Camera shake and blurring may remain depending on
scenes.
2
Press the shutter button down halfway to
focus on the subject.
Double
beep
Halfway
pressed
34
3
Subjects not suitable for autofocus
FinePix Z200fd uses a high-precision autofocusing
mechanism. However, it may have difficulty focusing on the
following:
Click
Very shiny subjects such
as a mirror or car body
Fully pressed
CAUTION
When shooting with the AF/AE lock function, turn off
Intelligent Face Detection.
MEMO
• AF/AE lock can be applied repeatedly before the shutter
is released.
• On FinePix Z200fd, pressing the shutter button down
halfway locks the focus and exposure settings (AF and
AE lock).
Using the Camera
Continue to hold the shutter button down
halfway. Move the camera back to the
original image and press the shutter button
fully.
Fast moving subjects
•
•
•
•
•
Subjects photographed through glass
Subjects that do not reflect well, such as hair or fur
Subjects with no substance, such as smoke or flames
Dark subjects
Subjects with little or no contrast between the subject and
the background (such as subjects dressed in the same color
as the background)
• Shots where another high-contrast object (not the subject) is
close to the AF frame and is either closer or further away
than your subject (such as a shot of someone against a
background with strongly contrasting elements)
For such subjects use AF/AE lock (➝p.34).
35
Taking Pictures (AUTO Mode)
Adjusting the shot composition
Select the LCD monitor display.
Press DISP/BACK to change the LCD monitor display.
Best framing
Position the main subject at
the intersection of two lines
in this frame or align one of
the horizontal lines with the
horizon. Use this frame as a
guide to the subject’s size
and the balance of the shot
while composing a shot.
MEMO
Always use AF/AE lock when composing a shot. The
image may be out of focus if AF/AE lock is not used.
Text displayed
No text displayed
Framing guideline
displayed
36
Viewing the Images
Play back your images to check them. For important
photographs, always take a test shot and view the image
to make sure that the camera is working normally.
Select the LCD monitor display.
Press DISP/BACK during Playback mode to change the
LCD monitor display.
Using the Camera
Setting the camera to Playback
mode
Press w during shooting to change to Playback mode.
100 - 0001
ISO 100
When the camera is off, press w for about 1 second to
turn the camera on in Playback mode.
MEMO
• When pressing w, the last image shot in the selected
folder appears on the LCD monitor.
• When playing back images shot with a camera other
than FinePix Z200fd, “ ” (present icon) appears on
the LCD monitor.
CAUTION Still images viewable on FinePix
Z200fd
12 / 31 / 2050
250
F3.8
10:00 AM
-1 2 3
Text displayed
No text displayed
2050
12/29
12/30
12/31
1/14
Sorting by date
This camera will display still images recorded on FinePix
Z200fd or still images (excluding some uncompressed
images) recorded on any FUJIFILM digital camera that
supports xD-Picture Cards or SD Memory Cards. Clear
playback or playback zooming may not be possible for still
images shot on cameras other than FinePix Z200fd.
37
Viewing the Images
Playback of images in the folder
Play back images saved in folders. This camera has 7
folders ([
MY PICTURES], [
FAMILY], [
TRAVEL], [
EVENTS], [
FAVORITES], [
PRIVATE], [Y INTERNAL MEMORY]). You can play
back other images in other folders during playback. You
can also move or copy images between folders (➝p.47).
Z Setting the password
You can set a 4-digit password to the [PRIVATE] folder.
MEMO
If you forget your password, set again.
PASSWORD
SELECT FOLDER
0 0
MY PICTURES
FAMILY
TRAVEL
EVENTS
FAVORITES
PRIVATE
0
0
SET
A Open the [SET-UP] screen.
See “1 Open the [SET-UP] menu.” (➝p.102).
A Select [
SELECT FOLDER] from the [PLAYBACK
MENU] to display the setting screen.
Setting the [PLAYBACK MENU] (➝p.85)
B Select the folder including images to play
back.
C Press MENU/OK to play back.
B Select
.
C Move to menu item.
D Select [
PASSWORD].
MEMO
• The [PRIVATE] folder is only for playback mode.
• Only the [INTERNAL MEMORY] folder is available
when a memory card is not inserted.
38
E Set the password.
Single-frame playback
MEMO
• The password function is only a lock function and you
cannot encrypt it.
• The [PRIVATE] folder can be played back with other
cameras as a normal folder.
INPUT PASSWORD
UNLOCK OK?
0 0
SET
0
0
CANCEL
A Select [
SELECT FOLDER] from the [PLAYBACK
MENU] to display the setting screen.
Setting the [PLAYBACK MENU] (➝p.85)
B Select [
PRIVATE FOLDER] and input
the password.
ISO 100
12 / 31 / 2050
250
F3.8
10:00 AM
Using the Camera
Z Inputting password
A 4-digit password is necessary to play back, move or
copy images in the [PRIVATE] folder, if you set the
password.
100 - 0001
To select the required image:
Press p: last image
Press q: next image
Intelligent Face Detection
When playing back images taken with Intelligent Face
Detection (➝p.32) (
appears on the LCD monitor),
press
(Intelligent Face Detection). A frame appears
around the faces that were detected by FinePix Z200fd.
Press
(Intelligent Face Detection) to alternate the
detected face. For images shot with a camera other than
FinePix Z200fd, the frame may not appear.
Selecting images quickly
To select images quickly, hold down p or q for 1
second during playback.
When releasing p or q, camera returns to single-frame
playback.
Continued Q
39
Viewing the Images
MEMO
Playback zoom
1
Pressing DISP/BACK cancels playback zoom.
Zoom in / Zoom out.
Intelligent Face Detection
To zoom in an image during single-frame playback:
W button (Zoom out)
T button (Zoom in)
ZOOM
Zoom bar
Press W or T to zoom in or out on an image.
2
Display another part of the image.
Navigation screen
(Current displayed
image)
Press n, o, p, or q to display another
part of the image.
40
BACK
For images taken with Intelligent Face Detection (➝p.32)
( appears on the LCD monitor), the displayed face
switches each time you press
(Intelligent Face
Detection). Press the W button (zoom out) or T button
(zoom in) to display the selected face zoomed in or out.
Press n, o, p or q to display another part of the
image.
Multi-frame playback
2 frames playback
Using the Camera
Use this function to display a single frame, 2 frames, 9
frames in the folder, or 100 frames regardless of the
folder. You can compare and select images using the
Multi-frame display. Use the zoom lever to change the
display.
100 - 0001
ISO 100
12 / 31 / 2050
1000 F3.8
10:00 AM
A Select the image you want to compare,
such as the image taken in [
NATURAL & d] mode.
B Press MENU/OK to enlarge the image.
9 frames playback
A Change the colored frame and select an
image.
Press n or o repeatedly to jump to the
next page.
Continued Q
41
Viewing the Images
Sorting by date
B Press MENU/OK to enlarge the image.
In sorting by date mode (➝p.37), you can view all images
taken on the same day.
2050
Micro thumbnails playback (100 frames)
12 / 29
12 / 30
12 / 31
1/11
A Move the cursor (colored frame) to the
selecting frame.
A Change the colored frame and select an
image.
Press n or o repeatedly to jump to the
next page.
B Press MENU/OK to enlarge the image.
MEMO
• Keep rotating the wheel dial when reaching the last
image in a folder to move to the next folder.
• The [PRIVATE] folder with a password set cannot be
displayed.
42
B Press MENU/OK to enlarge the image.
MEMO
In sorting by date mode, images in one folder are
displayed in order of date.
To display all images in the camera, use micro thumbnails
playback.
Selecting the date
2050
Using the Camera
12 / 29
12 / 30
12 / 31
11
A Move the cursor (colored frame) to
the upper left frame.
on
B Display the selecting date.
C Move the cursor (colored frame) to select
the date.
Press n or o repeatedly to jump to the
next page.
D Return to the image selection.
43
G Erasing the Images/Movies
Use this mode to erase unnecessary images or movies to
have ample free space on the Memory Card or internal
memory. Your camera calls images “frames”.
Using the erase button (
Pressing
/n)
(n) erases images easily.
ERASE OK?
OK
Setting the camera to w
Playback mode (➝p.37)
Erasing from the [PLAYBACK
MENU]
PLAYBACK MENU
SLIDE SHOW
TRIMMING FOR BLOG
SELECT FOLDER
MOVE/COPY
ERASE
TRANSITION
CANCEL
A Press MENU/OK to open the [PLAYBACK
MENU].
SET
A Select the erasing image.
B Select [G ERASE].
B Press
(n).
C Move to setting item.
C Select [OK].
DPress MENU/OK to erase the displayed
image.
44
Setting the camera to w Playback mode (➝p.37)
PLAYBACK MENU
Erasing one frame at a time ([FRAME])
SLIDE SHOW ALL FRAMES
TRIMMING FORFRAME
BLOG
SELECT FOLDER BACK
MOVE/COPY
ERASE
TRANSITION
ERASE OK?
Using the Camera
YES
CANCEL
D Select [FRAME] or [ALL FRAMES].
A Select the erasing frame (file).
E Press MENU/OK to confirm the setting.
B Press MENU/OK to erase the currently
displayed frame (file).
MEMO
To erase another frame (file), repeat above steps.
When erasing frames (files) is completed, press DISP/
BACK.
CAUTION
Pressing MENU/OK repeatedly erases consecutive
frames (files). Take care not to erase a frame (file) by
mistake.
Continued Q
45
G Erasing the Images/Movies
Setting the camera to w Playback mode (➝p.37)
Erasing all frames ([ALL FRAMES])
ERASE ALL OK?
IT MAY TAKE A WHILE
OK
CANCEL
SET
MEMO
• When using a Memory Card, the images in the selected
folder of the Memory Card are erased. When not using
a Memory Card, the images in the internal memory are
erased.
• Protected frames (files) cannot be erased. Unprotect
the frames (files) before erasing them (➝p.88).
• [DPOF SPECIFIED. ERASE OK?] or [DPOF
SPECIFIED. ERASE ALL OK?] appears, when erasing
DPOF specified files is attempted.
CAUTION
Erased frames (files) cannot be recovered. Back up
important frames (files) onto your PC or another media.
A Select [OK].
B Press MENU/OK to erase all the frames
(files).
MEMO
Press DISP/BACK to cancel
erasing of all the frames
(files). Some unprotected
frames (files) will be left
unerased.
CANCEL
46
Moving or Copying the Images
It is possible to transfer saved images between folders.
Your camera calls images “frames”. Play back an image
or folder to move or copy in advance by referring to
“Playback of images in the folder” (➝p.38).
Moving one frame at a time from a folder
([MOVE])
PLAYBACK MENU
MOVE ALL
SLIDE SHOW
MOVE
TRIMMING FOR
BLOG
COPY ALL
SELECT FOLDER
MOVE/COPYCOPY
BACK
ERASE
TRANSITION
SLIDE SHOW
TRIMMING FOR BLOG
SELECT FOLDER
MOVE/COPY
ERASE
TRANSITION
A Press MENU/OK to open the [PLAYBACK
MENU].
A Select [MOVE].
B Select [
B Press MENU/OK to open the folder
selecting screen.
MOVE/COPY].
C Press MENU/OK to move to menu item.
Copying images to another Memory Card
Copy images from folders to the internal memory folder using
the [MOVE/COPY] function, then remove the Memory Card
and insert another Memory Card into the camera. Then, copy
images to the Memory Card from the internal memory folder.
C Select the folder to move.
MOVE OK?
EVENTS
SET
MEMO
Select the [MY PICTURES] folder to play back images on a
memory card shot by another camera without a folder function.
Using the Camera
PLAYBACK MENU
Setting the camera to w
Playback mode (➝p.37)
CANCEL
Continued Q
47
Moving or Copying the Images
Setting the camera to w Playback mode (➝p.37)
D Press MENU/OK to move the currently
displayed frame (file).
MOVE ALL OK?
EVENTS
MEMO
IT MAY TAKE A WHILE
• Images to move can also be selected after selecting a
folder to move in step C.
• When moving frames (files) is completed, press DISP/
BACK.
Moving all frames in a folder ([MOVE
ALL])
SET
CANCEL
D Press MENU/OK to move all the frames
(files).
CAUTION
PLAYBACK MENU
MOVE ALL
SLIDE SHOW
MOVE
TRIMMING FOR
BLOG
COPY ALL
SELECT FOLDER
MOVE/COPYCOPY
BACK
ERASE
TRANSITION
A Select [MOVE ALL].
B Press MENU/OK to open the folder
selecting screen.
C Select the folder to move.
48
• When [\ MEMORY FULL] or [Y MEMORY FULL]
appears on the LCD monitor, moving the data stops on
the way.
• When moving the image that has specified DPOF
setting, the DPOF setting is not moved.
Setting the camera to w Playback mode (➝p.37)
Copying one frame at a time from a
folder ([COPY])
MEMO
MOVE ALL
SLIDE SHOW
MOVE
TRIMMING FOR
BLOG
SELECT FOLDER
COPY ALL
COPY
COPY
MOVE/COPY
BACK
ERASE
TRANSITION
A Select [COPY].
• Images to copy can also be selected after selecting a
folder to copy in step C.
• When copying frames (files) is completed, press DISP/
BACK.
Using the Camera
PLAYBACK MENU
D Press MENU/OK to copy the currently
displayed frame (file).
Copying all frames in a folder ([COPY
ALL])
PLAYBACK MENU
B Press MENU/OK to open a folder selecting
screen.
MOVE ALL
SLIDE SHOW
MOVEBLOG
TRIMMING FOR
COPY ALL
SELECT FOLDER
MOVE/COPYCOPY
BACK
ERASE
TRANSITION
C Select the folder to copy.
A Select [COPY ALL].
COPY OK?
EVENTS
SET
B Press MENU/OK to open a folder selecting
screen.
CANCEL
C Select the folder to copy.
Continued Q
49
Moving or Copying the Images
COPY ALL OK?
EVENTS
IT MAY TAKE A WHILE
SET
CANCEL
D Press MENU/OK to copy all the frames
(files).
CAUTION
• When [\ MEMORY FULL] or [Y MEMORY FULL]
appears on the LCD monitor, copying the data stops on
the way.
• When copying the image that has specified DPOF
setting, the DPOF setting is not copied.
50
Setting the camera to w Playback mode (➝p.37)
Using the Shooting Functions — Procedure of Setting
Specify the camera settings for taking pictures to get the
best result. A general guide is given below.
1
Select the Shooting mode.
Pressing this button allows you to focus on
Intelligent
people’s faces. Also, red eye-effect,
Face Detection/
caused by the light of the flash reflecting off
b Red-eye
the inside of the eye, can be corrected
Removal
before an image is recorded. (➝p.32).
e Macro
Used for close-up shots (➝p.59).
d Flash
Used for shots in dark locations or for
backlit subjects, etc. (➝p.60).
AUTO
Automatic mode
setting according to
shooting conditions.
SET
[AUTO]
MENU
* Self-timer
Dual IS
mode
Used in situations such as group shots
where the photographer is included in the
shot (➝p.63).
Reduces camera shake and moving
subject blurring (➝p.33).
This is the easiest mode for taking
pictures (➝p.54).
Advanced Features — Photography
Set the Shooting mode from the top menu.
The camera settings are tailored to the scene being
shot.
Z Specifying functions using buttons
/
/ /H/ Select the best Shooting mode for the
,/./// / scene being shot (➝p.54-58).
/
/ / /
/ / /
s
2
This mode provides detailed settings that
are impossible to set in [AUTO] mode
(➝p.58).
Specify the photography settings.
Pressing buttons or selecting menu allows you to
specify photography functions. You can obtain the
best result for shooting.
Intelligent Face Detection/
b Red-eye Removal button
(n) Dual IS button
e (p) Macro button
d (q) Flash button
* (o) Self-timer button
51
Using the Shooting Functions — Procedure of Setting
Z Specifying functions using [SHOOTING MENU]
[
HIGH-SPEED
SHOOTING]
[
SHOOTING MENU
Set shooting parameters
SET
SHOOTING MENU
HIGH-SPEED SHOOTING
CONTINUOUS
QUALITY
ISO
COLOR
SET-UP
CONTINUOUS]
Use to take pictures continuously
(➝p.70).
[S EXP.
COMPENSATION]
Use this setting to obtain the correct
exposure (only
, s) (➝p.73).
[T WHITE
BALANCE]
Use to adjust the color tone (only ,
s) (➝p.74).
[
QUALITY]
Use to specify required image size
(➝p.74).
[
ISO]
Use to specify required sensitivity
setting (➝p.75).
[
FinePix COLOR]
Use to specify required color tone
(➝p.76).
[
AF MODE]
Use to specify focusing mode (only
s) (➝p.77).
[U SET-UP]
52
Use to focus the shot quickly (➝p.70).
Use to set system parameters
(➝p.102).
Setting the Shooting Mode
You can select the most suitable setting according to the
subject by selecting one of the Shooting modes.
Setting a Shooting mode suited
to the scene
Automatic mode
setting according to
shooting conditions.
SET
MENU
A Press MENU/OK to open the top menu.
• See p.61 for information on the available flash modes.
• When anything other than [AUTO],
,
,
and
s in the Shooting mode is selected,
p-CHROME
(➝p.76) cannot be set.
• When anything other than s in the Shooting mode is
selected, only [AUTO] can be selected for the [
ISO]
(sensitivity) setting.
• In the Shooting mode, you can change the folder to
save images or movies by rotating the wheel dial
quickly one time or more.
Continued Q
Advanced Features — Photography
AUTO
MEMO
B Select the Shooting mode.
C Press MENU/OK to confirm.
53
Setting the Shooting Mode
CAUTION
[AUTO]
• Flash fires automatically. Do not use this mode at
situations where the flash cannot be used.
• When there is insufficient space on the Memory Card or
internal memory for 2 shots, this mode cannot be set.
• Continuous shooting is disabled when setting
.
This is the easiest mode for providing crisp and clear
shots.
Use this mode for ordinary photography.
[
NATURAL & d]
This mode shoots 2 images continuously without flash
and with flash. Shooting with flash allows you to take a
picture of a main subject brightly. Shooting without flash
produces beautiful images that retain the natural
ambience. This mode is useful for shooting 2 different
types of pictures at the same time.
When pressing the shutter button, first picture is taken
without flash and next picture is taken with flash.
Always 2 pictures are taken per 1 shot.
Do not move the camera until the shooting ended.
MEMO
This mode helps to avoid failed shots that may occur
when using other Shooting modes when taking a picture
against the sun, etc.
54
[
NATURAL LIGHT]
This mode produces
beautiful images that retain
the natural ambience when
shots are taken in low-light
conditions.
This mode is also ideal for
shooting indoor or situations
where the flash cannot be
used.
Camera sets the high-sensitivity setting when selecting
the Natural light mode. This mode is effective for reducing
camera shake and moving-subject blurring when taking
pictures in low-light conditions.
CHECK
Flash cannot be used in the Natural light mode.
[
CHECK
AUCTION MODE]
This mode is suitable for shooting pictures for a web
auction. You can record 1 to 4 shots as a single image. It
is convenient for showing items in various angles for web
auctioning.
A Select [
1
2
1
2
1
3
3
2
4
Advanced Features — Photography
[H PORTRAIT]
<Setting frames>
You can select 4 types of frames:
1
• The image is recorded in ` (640 × 480) size.
• Face detection mode cannot be used.
• When
appears in the LCD monitor, the
[ AUCTION MODE] cannot be used.
Use this mode for
photography to get
beautiful skin tones and
soft overall tone.
AUCTION MODE] from the top menu.
B Show a frame selecting display.
[, LANDSCAPE]
C Select the frame.
D Press MENU/OK to confirm the setting.
Use this mode for shooting
scenery in daylight and
provides crisp, clear shots of
scenery such as buildings
and mountains.
CHECK
Flash cannot be used in
the Landscape mode.
Continued Q
55
Setting the Shooting Mode
[. SPORT]
[
Use this mode to take
pictures of a moving subject.
It gives priority to faster
shutter speeds.
Use this mode to shoot
fireworks.
It is effective for taking
more vivid shots of
fireworks with a slow
shutter.
FIREWORKS]
CHECK
CHECK
When setting [. SPORT] mode, the camera sets to [
HIGH-SPEED SHOOTING] mode (➝p.70) automatically.
• Flash cannot be used in the Fireworks mode.
• We recommend using a tripod to prevent camera
shake. Because a picture is taken with a slow shutter.
[/ NIGHT]
Z Selecting the exposure time setting
Use this mode for shooting
evening and night scenes.
A picture is taken with a slow
shutter of up to 3 seconds.
4.0"
CHECK
We recommend using a tripod to prevent camera shake.
Because a picture is taken with a slow shutter.
56
Select the exposure time.
[
SUNSET]
[
UNDERWATER]
Use this mode for shooting
with a waterproof case.
It is effective for taking
more vivid shots of ocean
blue.
[
[
SNOW]
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at snowy
scene where the whole
screen appears white.
[
BEACH]
Use this mode to prevent
darkening images and
provide crisp, clear shots,
when shooting at beach
under strong sunlight.
MUSEUM]
Use this mode for taking
pictures in places such as
museum where the use of
flash and making an
operation sound and a
shutter sound are
restricted.
The flash mode is set to
suppressed flash and the
operation sound, shutter sound, and illumination lamp are
disabled.
Advanced Features — Photography
Use this mode to shoot
sunset, making the colors
more vivid.
MEMO
Check whether photography is permitted before using this
mode.
Continued Q
57
Setting the Shooting Mode
[
PARTY]
Use this mode for shooting
at indoor wedding and
party.
This mode produces
beautiful images that retain
the natural ambience when
shots are taken in low-light
conditions.
[
TEXT]
Use this mode to shoot
documents and white
board.
It is effective for taking
clearer shots of letters.
CHECK
[
FLOWER]
Use this mode to take
clear close-up shots when
zooming up a flower.
It is effective for taking
more vivid shots of flower
petal.
CHECK
• Flash cannot be used in the Flower mode.
• Macro (close-up) mode is automatically set for Flower
mode.
58
Macro (close-up) mode is automatically set for Text
mode.
[s MANUAL]
Set the Photography functions to manual to easily control
yourself.
Photography functions:
• [S EXP. COMPENSATION] (➝p.73)
• [T WHITE BALANCE] (➝p.74)
• [
AF MODE] (➝p.77)
e Macro (Close-up)
Use this mode to take close-up shots.
Available Shooting modes: [AUTO],
, s (➝p.54, 55, 57, 58)
MEMO
,
,
,
Press e (p) to select Macro mode.
Press e (p) again to cancel Macro mode.
• We recommend using a tripod to prevent camera shake
in Macro mode.
• Turning the camera off cancels Macro mode.
• Even if the [
AF MODE] is set to [ MULTI] (➝p.78),
the camera focuses near the center of the LCD monitor.
Advanced Features — Photography
e appears on the LCD
monitor indicating that you
can take close-up shots.
,
59
d Setting the Flash (Intelligent Flash)
Flash photography is useful for taking pictures at night or
indoor dark locations. Choose from 7 flash modes
according to the type of shot. See p.51 for information on
the available Photography modes.
[
AUTO FLASH] (not displayed)
Use this mode for ordinary photography.
The flash fires as required by the shooting conditions.
MEMO What is Intelligent Flash?
The Intelligent Flash feature instantly determines the
subject’s position, distance from the camera, exposure,
etc., and automatically adjusts the camera settings to the
optimal flash volume and sensitivity for the scene. Even
dimly lit indoor scenes can be shot beautifully, just as they
appear, without subjects being washed out or losing
background details.
The Intelligent Flash feature is always used when
shooting with flash.
[
RED EYE REDUCTION]
This mode is suitable for shooting portraits
in low-light conditions.
Use this mode to minimize red-eye (eyes
appear in red in the finished photo).
MEMO Red-eye effect
When using the flash to take a picture of people in lowlight conditions, their eyes sometimes appear red in the
picture. This is caused by the light of the flash reflecting
off the inside of the eye.
The flash setting changes
each time you press d (q).
When [
FACE DETECTION
b REMOVAL ON] is set.
MEMO
When pressing the shutter button down halfway, b
appears on the LCD monitor before the flash fires.
60
[d FORCED FLASH] [
FLASH]
FORCED
Use this mode in backlit scenes, or to get the correct
colors when taking a picture under bright lighting.
In this mode, the flash fires in bright as well as dark
conditions. Using
synchronizes Red-eye reduction
mode.
[C SUPPRESSED FLASH]
This mode is suitable for situations where the flash cannot
be used.
In dark conditions, we recommend using a tripod.
Any time, flash does not fire.
This mode allows you to take pictures of people at night
that clearly show both your subjects and the night time
backdrop. Always use a tripod in this mode.
Using n synchronizes Red-eye reduction mode.
Using / selects slow shutter speeds of up to 3 seconds.
CAUTION
In bright scenes, overexposure may occur.
Available flash modes in each Photography mode are listed
below.
When [
FACE DETECTIONbREMOVAL OFF] is set:
[AUTO]
[AUTO]
d
C
✓
✓
✓
✓
✓
c
✓
H
✓
✓
✓
✓
✓
✓
✓
✓
✓
,
.
✓
✓
✓
✓
/
✓
Advanced Features — Photography
[c SLOW SYNCHRO],
[n RED EYE & SLOW]
Available flash modes in Photography modes
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
s
✓
✓
✓
✓
✓
✓
Continued Q
61
d Setting the Flash (Intelligent Flash)
FACE DETECTION bREMOVAL ON] is set:
When [
C
[AUTO]
✓
✓
✓
✓
✓
n
✓
H
✓
✓
✓
✓
✓
✓
,
.
/
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
s
62
✓
✓
✓
✓
CAUTION Notes on using flash
• If pressing the shutter button while the flash is charging
(indicator lamp blinking orange), the picture will be
taken without the flash (when using [AUTO] and
).
• The flash charging time may increase when the battery
is low on charge.
• When taking a picture using the flash, the image may
disappear and go dark briefly due to flash charging. The
indicator lamp blinks orange during charging.
• The flash fires several times (pre-flashes and the main
flash). Do not move the camera until the picture is
taken.
* Self-Timer
The self-timer is used in situations where the
photographer is included in the shot.
Setting self-timer
The self-timer setting changes each time you press * (o).
[
COUPLE TIMER]
Available Shooting modes: [AUTO],
,
,
,
,
,s
,
, H, /,
A Press
. Each time
DISTANCE] changes.
is pressed, the setting for [
The last displayed setting is
the selected mode.
: The picture is taken when
2 faces come close
together.
: The picture is taken when
all members get together.
Advanced Features — Photography
The picture is taken automatically when 2 faces come
close together.
Set the self-timer setting to [
COUPLE TIMER]
(➝p.63).
:[NEAR]
: The picture is taken after
10 seconds.
:[CLOSE UP]
:[SUPER
CLOSE]
(: The picture is taken after
2 seconds.
DISTANCE
CANCEL
The higher the setting [ DISTANCE], the
closer the 2 faces will be when the countdown
begins before the shot is taken.
Continued Q
63
* Self-Timer
B As the 2 faces come closer and
the indicator(s)
becomes full, countdown starts. Then the picture is
automatically taken.
Available setting for Group
timer is 1 to 4 persons.
MEMO
• Set Macro (close-up) mode when taking a self portrait
by holding the camera.
• Any of the following cancels [COUPLE TIMER] setting:
- Pressing the shutter button halfway.
- Pressing DISP/BACK.
- Changing shooting mode.
- Changing to Playback mode.
- Power is cut off.
NUMBERS
CANCEL
B When the camera recognizes the set number of
persons and the
the indicator(s) becomes full,
countdown starts. Then the picture is automatically
taken.
MEMO
[
GROUP TIMER]
Available Shooting modes: [AUTO],
,
,
,
,
,s
,
, H, /,
The picture is taken automatically when all members get
together.
Set the self-timer setting to [
GROUP TIMER]
(➝p.63).
A Press
. Each time
NUMBERS] changes.
64
is pressed, the setting for [
• Set Macro (close-up) mode when taking a self portrait
by holding the camera yourself.
• Any of the following cancels [GROUP TIMER] setting:
- Pressing the shutter button halfway.
- Pressing DISP/BACK.
- Changing shooting mode.
- Changing to Playback mode.
- Power is cut off.
[
B Take pictures in selected time.
10 SEC]/ [( 2 SEC]
Available Shooting modes: All
Set the self-timer setting to [
(➝p.63).
10 SEC] or [( 2 SEC]
A picture is taken after the self-timer lamp changes
from lit to blinking (only blinks with the 2-second selftimer).
Double
beep
Halfway pressed
Advanced Features — Photography
A Press the shutter button down halfway to focus on the
subject and press the shutter button fully.
Beep
Fully pressed
Pressing the shutter button down halfway that focuses
on the subject.
Without releasing the shutter button, press the button
all the way down (fully pressed) to start the self-timer.
A countdown appears on the
LCD monitor indicating the
time remaining until the
picture is taken.
Continued Q
65
* Self-Timer
Using the 2-second self-timer
This is useful when you worry about camera shake even if
attaching the camera on a tripod.
MEMO
• To stop the [ 10 SEC] or [(2 SEC], once it has
started running, press DISP/BACK.
• Any of the following cancels [ 10 SEC] or [(2 SEC]
setting:
- Completing the shooting
- Changing the Photography mode setting
- Setting the camera to Playback mode
- Turning the camera off
• Take care not to stand in front of the lens when pressing
the shutter button as this can prevent the correct focus
or brightness (exposure) from being achieved.
Intelligent Face Detection
The Intelligent Face Detection function is especially
useful when using the self timer since it ensures that
faces will appear in focus automatically.
66
Using [SHOOTING MENU]
Use the [SHOOTING MENU] to adjust image quality or
focus. You can take pictures in a wide range of conditions.
F Change the setting.
Setting the [SHOOTING MENU]
G Press MENU/OK to confirm the setting.
SHOOTING MENU
A Press MENU/OK to open the top menu.
B Select [
Continued Q
Advanced Features — Photography
HIGH-SPEED
SHOOTING
LONG
PERIOD
FINAL 3
CONTINUOUS
QUALITY TOP 3
ISO
COLOR
SET-UP
SHOOTING MENU].
C Press MENU/OK to open the [SHOOTING
MENU].
D Select the menu.
E Move to setting item.
67
Using [SHOOTING MENU]
Setting the shooting menu (➝p.67)
Z List of SHOOTING MENU options
Menu
[
HIGH-SPEED
SHOOTING] (➝p.70)
[
CONTINUOUS]
(➝p.70)
[S EXP.
COMPENSATION]
(➝p.73)
[T WHITE
BALANCE] (➝p.74)
[
QUALITY]
(➝p.74)
[
ISO] (➝p.75)
[
FinePix COLOR]
(➝p.76)
[
AF MODE]
(➝p.77)
68
Functions
Factory
default
Settings
This setting can be used when the Shooting mode is set to anything other
than . This setting is always set to [ON] when the Shooting mode is set to
[ON]/[OFF]
..
Use this setting to reduce the time required for focusing.
This setting can be used when the Shooting mode is set to anything other
than
, .
h / k / f / [OFF]
Use this setting to select the required continuous shooting mode.
This setting can be used when the Shooting mode is set to , s.
–2 EV to +2 EV
Use this setting to obtain the correct exposure.
(1/3 EV increments)
This setting can be used when the Shooting mode is set to , s.
Use this setting to adjust the color balance to suit the color of the ambient
light around the subject.
Specifies the image size.
The larger image size, the better image quality is obtained. The smaller
image size, the larger number of images are recorded.
This setting cannot be used when the Shooting mode is set to .
Specifies required sensitivity setting of the ambient light around the subject.
The larger value of the sensitivity, the higher sensitivity is obtained. The
higher sensitivity settings will allow you to take pictures in darker locations.
Specifies required color tone.
This mode is effective for taking more vivid shots or black and white shots.
This setting can be used when the Shooting mode is set to s and
Intelligent Face Detection is set to OFF.
Use this setting to specify the focusing mode.
[AUTO] / 6 / 7 / 9
/0/-/8
F/
/
N/
/
/
/
[AUTO]/[1600]/[800]/
[400]/[200]/[100]/[64]
[STD]/
/
/
[OFF]
[OFF]
[±0]
[AUTO]
N
[AUTO]
[STD]
Setting the shooting menu (➝p.67)
Shooting mode: .
MEMO
The options available in the [SHOOTING MENU] vary
depending on whether the mode is selected.
Shooting mode: [AUTO],
,
,
, , ,
, H, ,, /,
,
,
SHOOTING MENU
CONTINUOUS
QUALITY
ISO
COLOR
SET-UP
,
HIGH-SPEED SHOOTING
CONTINUOUS
QUALITY
ISO
COLOR
SET-UP
Shooting mode: s
SHOOTING MENU
HIGH-SPEED SHOOTING
CONTINUOUS
EXP. COMPENSATION
WHITE BALANCE
QUALITY
ISO
Shooting mode:
SHOOTING MENU
HIGH-SPEED SHOOTING
QUALITY
ISO
COLOR
SET-UP
Advanced Features — Photography
SHOOTING MENU
Shooting mode:
SHOOTING MENU
EXP. COMPENSATION
WHITE BALANCE
ISO
COLOR
SET-UP
69
[SHOOTING MENU]
Focusing the shot quickly
([
HIGH-SPEED SHOOTING])
Available Shooting modes:
All (except for , .) (➝p.54 – 58)
Setting the shooting menu (➝p.67)
Taking pictures continuously
([
CONTINUOUS])
Use this mode to take pictures of a moving subject.
SHOOTING MENU
Use this mode to reduce the time required for focusing
when pressing the shutter button down halfway.
It is useful to avoid missing snapshot opportunities.
HIGH-SPEED
SHOOTING
LONG
PERIOD
CONTINUOUS
FINAL 3
QUALITY TOP 3
ISO
COLOR
SET-UP
SHOOTING MENU
HIGH-SPEED SHOOTING
CONTINUOUS
QUALITY
ISO
COLOR
SET-UP
CAUTION
The [
LCD MODE] function on the [SET-UP] menu
cannot be set in this mode (➝p.108).
MEMO
• The available shooting distance is from about 1 m
(3.3 ft.) to infinity.
• When taking pictures while the High-speed shooting
mode is set to [ON], the battery will run down more
quickly.
CHECK
When setting [. SPORT] mode, the camera sets to [
HIGH-SPEED SHOOTING] mode automatically.
70
h: [LONG PERIOD] continuous shooting
k: [FINAL 3] continuous shooting
f: [TOP 3] continuous shooting
Setting the shooting menu (➝p.67)
CAUTION
[f TOP 3] continuous shooting
Available Shooting modes:
All (except for
, ) (➝p.54 – 58)
STORING
Shooting continues as long as
holding the shutter button
down. This mode shoots up to
3 frames.
Continued Q
Advanced Features — Photography
• As long as the shutter button is held down, the camera
will continue to take pictures.
• Number of available frames is limited depending on the
available space on the Memory Card or internal
memory.
• In [TOP 3] and [FINAL 3] continuous shooting mode,
the focus is determined in the first frame and cannot be
changed in mid-sequence.
• The exposure is determined in the first frame, but in
[LONG PERIOD] continuous shooting the exposure is
adjusted for the scene being shot.
• The speed of continuous shooting varies depending on
the shutter speed.
• The flash cannot be used as the flash mode is set to C
Suppressed flash (➝p.61). However, if you switch back
to the normal shooting setting, the flash mode resets to
what it was before you selected continuous shooting.
• For [TOP 3] and [FINAL 3] continuous shooting, the
results are always displayed after you shoot. Note that
pictures taken using [LONG PERIOD] continuous
shooting are recorded without displaying the results.
• Only 1 frame can be shot when using the [FINAL 3] or
[LONG PERIOD] continuous shooting mode and Selftimer mode together.
• Continuous shooting cannot be selected in [
NATURAL & d] setting and [
AUCTION MODE].
• Recording times may be longer for files shot with
[TOP 3] continuous shooting or [FINAL 3] continuous
shooting.
71
Setting the shooting menu (➝p.67)
[SHOOTING MENU]
[k FINAL 3] continuous shooting
Available Shooting modes:
All (except for
, ) (➝p.54 – 58)
Shooting continues as long as holding the shutter button
down.
This mode shoots up to 40 times. The camera records the
final 3 frames shot when you release the shutter button.
[h LONG PERIOD] continuous
shooting
Available Shooting modes:
All (except for
, ) (➝p.54 – 58)
Shooting continues as long as holding the shutter button
down. This mode shoots up to Memory Card or internal
memory end.
Max.40 shots
Press shutter button.
Release shutter button.
3 frames
72
Press shutter button.
Release shutter button.
All frames
Setting the shooting menu (➝p.67)
Adjusting exposure
compensation
([S EXP. COMPENSATION])
Available Shooting mode:
(➝p.55, 58)
Guide to compensation
• Backlit portraits:
+2/3 EV to +1 2/3 EV
,s
EXP. COMPENSATION
+2
+1
+0
• Very bright scenes (such
as snowfields) and
highly reflective
subjects: +1 EV
EV
-1
-2
positive (+) compensation
Advanced Features — Photography
Use this menu for shots to get the correct brightness
(exposure), such as shots with extremely high contrast
between the subject and the background.
• Shots made up
predominantly of sky: +1 EV
• Spotlit subjects, particularly against dark backgrounds:
–2/3 EV
• Scenes with low reflectivity, such as shots of pine trees
or dark foliage: –2/3 EV
*See Explanation of Terms “EV” (➝p.153).
MEMO
negative (–) compensation
• The exposure compensation setting is retained when
the camera is turned off (S icon appears). Set the
exposure value to “±0 EV” unless compensation is
required.
• Any of the following disables exposure compensation:
- Using the flash in [AUTO] or
mode
- Shooting dark scenes in d or
mode
73
[SHOOTING MENU]
Setting the shooting menu (➝p.67)
Adjusting color balance
([T WHITE BALANCE])
Available Shooting mode:
(➝p.55, 58)
,s
Adjust the color balance based on white to suit the color
of the ambient light around the subject.
WHITE BALANCE
AUTO
• We recommend playing back images after shooting to
check the color tones (white balance).
• Explanation of Terms “White Balance” (➝p.153)
Changing the quality setting
([
QUALITY])
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Z Quality settings in Photography mode
Quality mode
[AUTO]: Automatic adjustment
6 : Shooting outdoors in good weather
7: Shooting in shade
9 : Shooting under Daylight fluorescent lamps
0 : Shooting under Warm White fluorescent lamps
- : Shooting under Cool White fluorescent lamps
8 : Shooting in incandescent light
MEMO
• In [AUTO] mode, the correct white balance may not be
achieved for subjects such as close-ups of people’s
faces and pictures taken under a special light source.
Select the correct white balance for the light source.
• When the flash fires, the white balance setting for the
flash is used. Consequently, to achieve a particular
effect, the flash mode should be set to C Suppressed
flash (➝p.61).
• The color tones may vary depending on the shooting
conditions (light source, etc.).
74
Sample uses
F (3648 × 2736) Printing at up to 10R (25.4 × 30.5 cm/
N (3648 × 2736) 10 × 12 in.) / A4 size
For better quality, select
F
(3648 × 2432)
(2592 × 1944)
(2048 × 1536)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
(1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
(640 × 480)
To use for e-mail or web site
Setting the shooting menu (➝p.67)
Area shot and quality setting
Area shot excluding
Area shot with
Changing the sensitivity setting
([
ISO])
CHECK
Normal shooting provides an aspect ratio of 4:3 and
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to a Memory Card.
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes (➝p.151). The numbers
to the right of setting show the number of available
frames.
Settings
[AUTO]/[1600]/[800]/[400]/[200]/[100]/[64]
Selecting [AUTO] as the sensitivity setting, the camera
selects the best sensitivity setting for the subject’s
brightness.
The selected sensitivity
setting appears on the
LCD monitor when the
sensitivity setting is set to
another setting excluding
[AUTO].
Advanced Features — Photography
Use this menu to specify required sensitivity setting of the
ambient light around the subject.
The larger value of the sensitivity, the higher sensitivity is
obtained. The higher sensitivity settings will allow you to
take pictures in darker locations.
Continued Q
75
[SHOOTING MENU]
Setting the shooting menu (➝p.67)
Changing the FinePix COLOR
setting ([
FinePix COLOR])
MEMO
When anything other than [s MANUAL] in the
Photography mode is selected, only [AUTO] can be
selected for the [
ISO] (sensitivity) setting.
CAUTION
Although higher sensitivity settings will allow you to take
pictures in darker locations, they will also increase the
amount of speckling in your images. Choose the
sensitivity setting that best suits the conditions.
Use this menu to specify required color tone.
It is effective for taking vivid shots or black and white
shots.
CHECK
FinePix COLOR settings
[p-STANDARD]
The contrast and color saturation
are set to standard.
Use this mode for normal
photography.
[
The contrast and color saturation
are set to high.
This mode is effective for taking
p-CHROME]
more vivid shots of subjects such
as scenery (blue sky and greenery)
and flowers.
[
p-B&W]
This mode converts the colors in
the photographed image to black
and white.
When setting [
p-CHROME] or [
icon appears on the LCD monitor.
p-B&W], the
CAUTION
When anything other than [AUTO], [
NATURAL & d],
[
NATURAL LIGHT], [ AUCTION MODE] and [s
MANUAL] in the Shooting mode is selected,
does
not appear on the LCD monitor.
76
Setting the shooting menu (➝p.67)
Specifying focusing mode
([
AF MODE])
MEMO
• The [
FinePix COLOR] setting is retained even when
the camera is off or the mode setting is changed.
• [p-CHROME] may have little visible effect with some
subjects or the scene being shot. You may not be able
to see any difference on the LCD monitor.
Available Shooting mode: s (➝p.58)
(When Intelligent Face Detection is turned OFF)
CENTER
WHITE BALANCE
QUALI
MULTI
ISO
AF MODE
SET-UP
[
CENTER]
Advanced Features — Photography
Use this mode to specify focusing mode that best suits the
subject.
: [CENTER]
SHOOTING MENU
: [MULTI]
The camera focuses on the center of the LCD monitor.
Use this setting when taking pictures with AF/AE lock
(➝p.34).
Continued Q
77
[SHOOTING MENU]
[
Setting the shooting menu (➝p.67)
MULTI]
When pressing the shutter button down halfway, the
camera recognizes any strongly contrasting subject near
the center of the LCD monitor and displays the AF frame
over subject in focus.
Halfway pressed
AF frame
CAUTION
When taking pictures in Macro mode, the camera focuses
on the center of the LCD monitor.
MEMO
When the AF frame does not appear in the focusing
position, select [
CENTER] in the AF mode and use
AF/AE lock (➝p.34).
78
[IR MENU]
Sending and receiving images
([
IR COMMUNICATION])
MEMO
You can specify the infrared transmission setting in the
[SET-UP] menu. See p.102, 104 for information on
specifying the infrared transmission setting.
CHECK
Refer to the manual provided with each device for more
information.
IR MENU
IR COMMUNICATION
TRIMMING FOR BLOG
Sending image data
Sending image data to a FUJIFILM digital camera is shown
as an example here. You can send the data to another
device in the same way.
IR COMMUNICATION
Advanced Features — Playback
You can send photographed images to another FUJIFILM
digital camera (if it has IR Capability), other devices with
high-speed infrared transmission capability, or any other
mobile device with the IrSimple function. You can also
receive photographed images from a FUJIFILM digital
camera, another device with high-speed infrared
transmission capability, or another mobile device with the
IrSimpleShot™ (IrSS™) function.
D Press MENU/OK.
A Press w to set the camera to Playback
mode (➝p.37).
TRANSMIT
CANCEL
B Press
RECEIVE
(o) to open the [IR MENU].
A Set the receiving camera to receive data (➝p.80).
C Select [
IR COMMUNICATION].
B Select the sending frame (file).
Continued Q
79
[IR MENU]
CHECK
• Refer to the manual provided with the receiving device
for more information.
• When exchanging images with another Z200fd, images
are saved automatically in the same folder as the
transmitting camera.
Receiving the image data
(Angle: up to approx.15°)
C Point the infrared port on the transmitting camera
directly at the infrared port on the receiving camera
(➝p.12). Transmission distance is about 5 to 20 cm (2
to 7.9 in.) within approx. 15°.
D Press MENU/OK to begin transmission.
When transmission is completed,
[TRANSMISSION COMPLETED] will appear
on the LCD monitor.
IR COMMUNICATION
CONNECTING
CANCEL
CAUTION
80
• Make sure the receiving camera is turned on when
transmitting image data.
• Movie images cannot be transmitted.
• Images photographed with a camera other than FinePix
Z200fd may not be printed or transmitted.
Receiving the image data from a FUJIFILM digital camera is
shown as an example here. You can receive data from
another device in the same way.
IR COMMUNICATION
TRANSMIT
CANCEL
RECEIVE
A Set the sending camera to send data (➝p.79).
B Select the sending frame (file).
CAUTION
C Point the camera’s infrared port towards the front of
the camera’s infrared port (➝p.12). Transmission
distance is about 5 to 20 cm (2 to 7.9 in.) within
approx. 15°.
D Press o to begin receiving.
When receiving is completed, [DATA
RECEIVED] will appear on the LCD monitor.
IR COMMUNICATION
CONNECTING
CHECK
When exchanging images with another Z200fd, images
are saved automatically in the same folder as the
transmitting camera.
When receiving images from a camera other than Z200fd,
images are saved in the [MY PICTURES] folder.
Advanced Features — Playback
(Angle: up to approx.15°)
• Movie images cannot be transmitted.
• Image data may be compressed when transmitted.
• If [COMMUNICATION ERROR], [CANNOT BE
TRANSMITTED], or [CANNOT BE RECEIVED]
appears, press MENU/OK to retransmit the image data,
or press DISP/BACK to cancel transmitting.
• Do not place anything between the transmitting and
receiving device.
• Leaving the camera in direct sunlight or directly under
fluorescent lighting may prevent successful data
transfer.
• Successful transfer may not be possible when
transmitting near infrared transmission devices (such
as the remote controller of TV or VCR) or devices that
generate electrical noise.
• Correctly aim the infrared port towards the front of the
device or camera’s infrared port during image data
transmission.
MEMO
CANCEL
When playing back an image received from another
camera,
(present icon) will appear in the LCD monitor.
81
[IR MENU]
Processing, transmitting and
saving blog images
([
TRIMMING FOR BLOG])
B Press
You can change the pictures you take to a smaller size
and then transmit or save them. This function is perfect
when you want to post your pictures on a blog or other
online forum. It is also possible to trim images before
transmitting or saving them.
C Select [
(o) to open the [IR MENU].
TRIMMING FOR BLOG].
D The Effect /Transmit/Save screen
appears.
SET-UP
DATE/TIME
STANDARD
VOLUME
SMALL
SOUND
BLOG IMAGE SIZE
LCD BRIGHTNESS
Using the [SET-UP] menu (refer to p.102), select the
[ BLOG IMAGE SIZE]. The sizes for blog images are
[% STANDARD](640 × 480) or [$ SMALL](320 × 240)
(➝p.103). The size will be [% STANDARD](768 × 512)
or [$SMALL](384 × 256) for images shot at
.
MEMO Trimming Images
You can trim out the desired area of an image before
transmitting or saving it.
A Zoom the image in or out with the W button (zoom out)
or T button (zoom in).
B Press nopq to move the screen to the area you
want to trim out.
C Press MENU/OK to confirm the setting and return to
the Transmit/Save screen.
MEMO
IR MENU
IR COMMUNICATION
TRIMMING FOR BLOG
A Press w to set the camera to Playback
mode (➝p.37).
82
[
TRIMMING FOR BLOG] can be selected from the
[PLAYBACK MENU] (➝p.85).
Processing blog images
D Press MENU/OK to see a preview of the
image with the effect.
TRIMMING FOR BLOG
E Press MENU/OK to process the image.
EFFECT
TRANSMIT
REC
TRIMMING
CANCEL
MEMO
The processing menu screen is displayed by pressing
and holding o when the camera is playback mode.
Continued Q
ILLUSTRATION
PAINTING EFFECT
Advanced Features — Playback
A Select the frame (file) to process.
B The processing menu screen appears.
C Select [ILLUSTRATION] or [PAINTING
EFFECT].
83
[IR MENU]
Transmitting blog images
Saving blog images
You can resize images to VGA and then transmit them to
a device that supports the IrSimple function.
A Select the frame (file) to save.
B Press
(o) to save the image.
CHECK
• Saved blog images have filenames that start with
“BLOG” when they are imported to a PC or similar
device.
• When saved blog images are played back,
appears
on the screen and the images are surrounded by a
black frame.
CAUTION
Saved blog images cannot be rotated or trimmed.
MEMO
Images rotated with [
IMAGE ROTATE] are
transmitted or saved in their rotated state.
84
Using [PLAYBACK MENU]
Use this menu to play back photographed images.
Setting the [PLAYBACK MENU]
A Press w to set the camera to Playback mode (➝p.37).
PLAYBACK MENU
B Press MENU/OK to open the [PLAYBACK
MENU].
C Select the menu.
Menu
Page
[
SLIDE SHOW]
86
[
TRIMMING FOR BLOG]
82
[
SELECT FOLDER]
38
[
MOVE/COPY]
47
[ G ERASE]
44
[
TRANSITION]
86
[
IMAGE ROTATE]
87
[
PROTECT]
88
[
VOICE MEMO]
89
[
PRINT ORDER (DPOF)]
92
[
TRIMMING]
[U SET-UP]
96
102
Advanced Features — Playback
SLIDE SHOW
TRIMMING FOR BLOG
SELECT FOLDER
MOVE/COPY
ERASE
TRANSITION
Z List of the [PLAYBACK MENU] options
D Move to setting item.
E Change the setting.
F Press MENU/OK to confirm the setting.
85
Using [PLAYBACK MENU]
Setting automatic playback
([
SLIDE SHOW])
Use this mode to play back photographed images
continuously. You can select playback interval and type of
image transition.
PLAYBACK MENU
NORMAL
SLIDE SHOW
TRIMM NORMAL
SELECT
FADE-IN
MOVE FADE-IN
ERASEMULTIPLE
SCRAP BOOK VIEW
TRANSITION
MEMO
• To interrupt [
SLIDE SHOW], press MENU/OK.
• Press p or q to advance or go back through the
images when selecting [NORMAL] or [FADE-IN].
• You can select BGM during slide show.
• Scrap book view will select the size and position of the
images automatically.
• You can watch a slide show without AV connection
between camera and IR capable TV by selecting [IrSS].
For details on IR model, see our web site:
http://www.fujifilm.com/products/digital_cameras/
support/ir.html
• The Auto power off function (➝p.110) does not operate
during a slide show.
• Movie starts automatically. When the movie ends, the
playback function moves it on.
• Press DISP/BACK once during playback to display onscreen help.
86
Setting the playback menu (➝p.85)
Intelligent Face Detection
The camera plays back the image taken with Intelligent
Face Detection (➝p.32) zoomed in on the detected face
when [NORMAL ], [FADE-IN ] or [MULTIPLE] is
selected.
Selecting the type of image
transition ([
TRANSITION])
Use this mode to wipe, slide-in or fade-in the images.
PLAYBACK MENU
TRIMMING FORWIPE
SELECT FOLDER
SLIDE-IN
MOVE/COPY FADE-IN
OFF
ERASE
TRANSITION
IMAGE ROTATE
Select the image transition.
The image is displayed with selected
transition.
Setting the playback menu (➝p.85)
Rotating the images
([
IMAGE ROTATE])
When shooting in the vertical position, the image appears
horizontal on the LCD monitor.
Use this mode to rotate an image and to display correct
direction.
CAUTION
MEMO
IMAGE ROTATE].
D The image rotating screen appears.
E Rotate the image.
o: Rotates the image clockwise at a 90
degree angle.
n: Rotates the image counterclockwise at
a 90 degree angle.
An image can be rotated only when playing back using
FinePix Z200fd.
You may not be able to rotate images that were shot with
a camera other than FinePix Z200fd.
IMAGE ROTATE
SET
Advanced Features — Playback
Protected frames (files) cannot be rotated. Unprotect the
frames (files) before rotating them (➝p.88).
C Select [
CANCEL
A Select the frame (file) to rotate.
B Press MENU/OK to open the [PLAYBACK
MENU].
F Press MENU/OK to confirm the setting.
Next time the image is played back, it will
be automatically rotated.
Press DISP/BACK to cancel rotating the
image.
87
Using [PLAYBACK MENU]
Setting the playback menu (➝p.85)
Protecting the images
([
PROTECT])
[SET ALL]
Use this mode to prevent frames (files) from being
accidentally erased. Your camera calls images “frames”.
SET ALL OK?
IT MAY TAKE A WHILE
[FRAME] (set or reset a frame)
YES
To protect or unprotect only the selected frame (file):
PROTECT OK?
UNPROTECT OK?
CANCEL
Press MENU/OK to protect all the frames
(files).
[RESET ALL]
YES
CANCEL
Unprotected
YES
CANCEL
Protected (F appears)
RESET ALL OK?
IT MAY TAKE A WHILE
A Select the protecting/unprotecting frame
(file).
YES
B Press MENU/OK to protect/unprotect the
currently displayed frame (file).
Unprotected: protecting frame (file)
Protected: reset frame (file)
To protect another frame (file), repeat steps A and B.
When protecting frames (files) is completed, press DISP/
BACK.
88
CANCEL
Press MENU/OK to unprotect all the frames
(files).
Setting the playback menu (➝p.85)
MEMO To stop the procedure midway
Adding voice memos to the
images ([
VOICE MEMO])
Voice memos of up to 30 seconds can be added to still
images.
CANCEL
CAUTION
The Format function erases all the frames (files),
including protected frames (files) (➝p.110).
A Press w to set the camera to Playback
mode (➝p.37)
B Select the image to add a voice memo.
C Press MENU/OK to open the [PLAYBACK
MENU].
D Select [
Advanced Features — Playback
If the images are very large, protecting or unprotecting all
the frames (files) may take some time.
If you want to take a picture or record a movie during the
procedure, press DISP/BACK.
Recording voice memos
VOICE MEMO].
E The recording screen appears.
Continued Q
89
Using [PLAYBACK MENU]
Setting the playback menu (➝p.85)
REC STANDBY
START
FINISH
30s
CANCEL
REC
G The voice memo ends when pressing
MENU/OK midway or 30 seconds pass.
F Press MENU/OK to start recording.
The remaining recording time appears during recording.
RECORDING
28s
To record your comment: press MENU/OK.
To rerecord the comment: press DISP/BACK.
Remaining
time
MEMO
Blinking red
• When the image already has a voice memo
PLAYBACK MENU
REC
RE - REC
RE - REC
MEMO
BACK
MOVE/COPY
RE-REC
ERASE
TRANSITION
IMAGE ROTATE
PROTECT
VOICE MEMO
If you select an image that
already has a voice memo, a
screen appears in which you
can select whether to rerecord
the memo.
Microphone
• When [PROTECTED FRAME] appears, unprotect the
frame (➝p.88).
• Voice memos cannot be added to movies.
Face the microphone to record your comment.
Hold the camera about 20 cm (7.9 in.) away for the
best results.
90
Setting the playback menu (➝p.85)
Z Playing back voice memos
Playing back voice memo
Select an image file with a voice memo. #
appears on the LCD monitor.
(Setting the camera to w Playback mode
(➝p.37))
After playback ends, the playback repeats automatically.
Press p q during playback to go to the next file.
Description
Pauses the voice memo during
playback.
Press o again to resume
playback.
Stop
Stops playback.
Press p or q while voice
memo playback is stopped to go
back to the previous file or
advance to the next file
respectively.
The playback time appears on
the LCD monitor along with a
progress bar.
CHECK
STOP
PAUSE
Progress bar
As for playback volume, please adjust from the [SET-UP]
menu. (➝p.102)
• Audio recording format:
WAVE (➝p.153), PCM recording format
• Audio file size:
Approx. 480 KB (for a 30-second voice memo)
MEMO Playing back voice memo files
Advanced Features — Playback
15s
Control
Pause /
Resume
• You may not be able to play back some voice memo
files recorded on other cameras.
• Fast Forward/Rewind function is not available in this
camera.
CAUTION
Speaker
Uncover the speaker.
The sound may be difficult to hear.
91
Using [PLAYBACK MENU]
Setting the playback menu (➝p.85)
DPOF set frame
([
PRINT ORDER (DPOF)])
You can specify the image, number of prints, with or
without date of printing with a DPOF-compatible printer.
PLAYBACK MENU
ERASE WITH DATE
TRANSITION
WITHOUT DATE
IMAGE ROTATE
RESET ALL
PROTECT
VOICE
PRINT ORDER (DPOF)
[WITH DATEE] : The date will be imprinted on your
prints.
[WITHOUT
: The date will not be imprinted on your
DATE]
prints.
[RESET ALL]
: All DPOF settings will be canceled.
[WITH DATEE] / [WITHOUT DATE]
Selecting [WITH DATEE], E appears on the LCD
monitor and the date will be imprinted on your prints.
PRINT ORDER (DPOF
DPOF)
DPOF : 00009
Total number of prints
Setting for that frame
01 SHEETS
FRAME
92
SET
A Display the frame (file) for specifying
DPOF setting.
B Set a value.
Up to 99 sheets are printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more DPOF settings, repeat steps A and B.
C Always press MENU/OK after the settings are
completed.
Pressing DISP/BACK cancels those settings.
D Press MENU/OK again.
The total number of prints appears on the
LCD monitor.
MEMO Canceling DPOF setting
A Press MENU/OK to open the [PLAYBACK MENU].
B Select [
PRINT ORDER (DPOF)].
C Press q.
D Select [WITH DATE E] or [WITHOUT DATE] and
press MENU/OK.
E Select the frame (file) with the DPOF setting you want
to cancel.
F Press o to set the number of prints to 0 (zero).
To cancel the DPOF setting for another frame (file),
repeat steps E and F.
Always press MENU/OK to complete the settings.
• [RESET ALL] (➝p.94)
Setting the playback menu (➝p.85)
MEMO
Intelligent Face Detection
• When DPOF settings were specified on another
camera.
PRINT ORDER (DPOF)
DPOF : 00000
RESET DPOF OK?
00 SHEETS
FACE COUNT
FRAME
SET
YES
NO
CAUTION
• Pressing DISP/BACK while choosing settings will
cancel all current settings. If there were previous DPOF
settings, only the modifications are canceled.
• When selecting the [WITH DATE] setting, the date is
imprinted on your shots using the Print Service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some
cases).
• Images photographed with a camera other than FinePix
Z200fd may not be specified DPOF settings.
When setting images taken with Intelligent Face
Detection (➝p.32) ( appears on the LCD monitor), if
you press
(Intelligent Face Detection), frames appear
around the faces detected by the camera, and the number
of frames is set as the number of prints. This allows you
to easily prepare the same number of prints as the
number of people detected by the camera.
In addition, you can adjust the number of prints by
pressing n or o. To reset the number of prints to the
number of detected faces, press
(Intelligent Face
Detection) again.
Make sure to press MENU/OK when your settings are
complete.
Advanced Features — Playback
When the data includes a frame (file) with DPOF
settings that were specified on another camera,
[
RESET DPOF OK?] appears.
Pressing MENU/OK erases all of the DPOF settings
already specified for each frame (file). Specify the
DPOF setting for each frame (file) again.
• Prints of up to 999 frames (files) can be ordered on the
same Memory Card.
• DPOF settings cannot be specified for movies.
Continued Q
93
Using [PLAYBACK MENU]
Setting the playback menu (➝p.85)
MEMO
[RESET ALL]
To cancel all DPOF settings:
100 - 0001
RESET DPOF OK?
12 / 31 / 2050
250
F3.8
YES
Select [RESET ALL] in the [PLAYBACK MENU] (➝p.92).
Press MENU/OK.
94
10:00 AM
CANCEL
u appears on the LCD monitor during playback when the
image has specified DPOF settings.
Setting the playback menu (➝p.85)
Z [u PRINT ORDER (DPOF)]
DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications
for images shot using a digital camera on media such as a Memory Card. The recorded specifications include
information on which frames are to be printed.
This section gives a detailed description of how to order your prints with FinePix Z200fd.
*Some printers do not support date and time imprinting or specification of the number of prints.
*The warnings shown below may appear while specifying the prints.
[
RESET DPOF OK ?] (➝p.93)
When inserting a Memory Card that contains images specified for printing by another camera, those print specifications are all
reset and replaced by the new print specifications.
[DPOF FILE ERROR] (➝p.136)
Up to 999 images can be specified on the same Memory Card.
Advanced Features — Playback
[DPOF SPECIFIED. ERASE OK ?]
[DPOF SPECIFIED. ERASE ALL OK ?] (➝p.46)
When erasing the image, the DPOF setting for that image is deleted at the same time.
95
Using [PLAYBACK MENU]
Setting the playback menu (➝p.85)
Trimming the images
([
TRIMMING])
TRIMMING
Navigation screen
(Current displayed image)
Use this mode to trim the required part of the
photographed image.
CHECK
YES
Before selecting [
(file) to trim.
W button
(Zoom out)
TRIMMING
CANCEL
TRIMMING] menu, select the frame
T button
(Zoom in)
B Press n, o, p, or q to display another
part of the image.
TRIMMING
C Press MENU/OK.
YES
CANCEL
YES
CANCEL
REC OK?
Zoom bar
A Press W or T to zoom in or out on
an image.
REC
CANCEL
D Check the saved image size and press
MENU/OK.
The trimmed image is added as a separate
file in the final frame.
96
Setting the playback menu (➝p.85)
MEMO
Intelligent Face Detection
• Pressing DISP/BACK in step A or B returns to singleframe playback.
• A saved image size varies depending on the zoom
scale of step A. For 0.3 M, k YES option appears
in yellow.
• Image sizes
Printing at up to 6R (15.2 × 20.3 cm/6 × 8 in.) /
A5 size
To use for e-mail or web site
• When
quality setting is selected, the image is
trimmed to normal size (4:3 aspect ratio).
CAUTION
You may not be able to trim images that were shot with a
camera other than FinePix Z200fd.
TRIMMING
YES
CANCEL
For images taken with Intelligent Face Detection (➝p.32)
( appears on the LCD monitor), you can zoom in on the
focused faces and easily trim the main subject by
pressing
(Intelligent Face Detection).
When you want the freedom to trim a particular location,
you can adjust images with the normal trimming
procedure.
Advanced Features — Playback
Printing at up to 4R (10.2 × 15.2 cm/4 × 6 in.) /
A6 size
TRIMMING
97
r Recording Movies
Use this mode to record movies with sound.
1
Set the camera to r Movie mode.
With the camera in Playback mode, press the shutter
button down halfway to return to Shooting mode.
Select a folder to save movies in advance by referring
to “2 Select the folder” (➝p.28).
Z Zooming the image
You must zoom beforehand as you cannot zoom during
recording.
999m13s
13s
STANDBY
Zoom bar
A Press MENU/OK to open the top menu.
B Select [r MOVIE].
C Press MENU/OK to confirm.
999m13s
13s
STANDBY
98
The available recording
time appears on the LCD
monitor.
Press W or T to zoom in or out on
an image.
2
CHECK Recording movies
Record movies.
• Specifications: Motion JPEG (➝p.153), Monaural
sound
• Quality selection method: % (640 × 480 pixels)
$ (320 × 240 pixels)
• Frame rate (➝p.153): 30 frames per second (fixed)
MEMO
Fully pressed
CAUTION
Recording ends when pressing
the shutter button down
halfway during recording or the
remaining time runs out.
Halfway pressed
MEMO
There is no need to hold down the shutter button during
recording.
• Because a movie is recorded onto the Memory Card or
internal memory as it is saved, it cannot be recorded
correctly if the camera suddenly loses power (if the
battery runs out, the AC power adapter or DC coupler
are disconnected).
• A movie file taken by FinePix Z200fd may not be
playable on other cameras.
• Because sound is recorded concurrently with the
images, make sure that you do not cover the
microphone with a finger, etc. (➝p.12).
• Camera operation noises may be recorded during
movie shooting.
• The size of a movie file can be up to 2GB.
Advanced Features — Movie
Press the shutter button down fully to start recording.
During recording, [lREC] and a counter that shows the
remaining time appear on the LCD monitor.
• The brightness and color of the LCD monitor shown
during movie recording may differ from those shown
before recording begins.
• Pressing the shutter button down fully fixes the focus,
however the exposure and white balance are adjusted
to the scene being shot.
• If recording is stopped immediately after it begins,
1 second of the movie is recorded onto the Memory
Card or internal memory.
99
r Recording Movies
Changing movie size
Press MENU/OK to open the top menu to select [
SHOOTING MENU].
SHOOTING MENU
QUALITY
SET-UP
58
92
MEMO
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• In r Movie mode, you cannot set the [
ISO]
(sensitivity) setting and [
FinePix COLOR] setting.
• See p.151 for information on recording times per
Memory Card or internal memory.
CAUTION
A Select [
QUALITY].
B Move to menu item.
C Change the setting.
D Press MENU/OK to confirm the setting.
Z Quality settings in Movie mode
% (640 × 480 pixels): For better quality
$ (320 × 240 pixels): To record longer movies
100
If you shoot using the xD-Picture Cards with model
numbers containing “M” such as DPC-M1GB, movie
recording time may be reduced if you repeatedly record
and erase (frame erase) image files.
In such a case, erase all frames or format the xD-Picture
Card before use. Back up important frames (files) onto
your PC or another media.
w Playing Back Movies
Setting the camera to w
Playback mode (➝p.37)
Z Playing back movies
Control
100-0002
Pause /
Resume
Stop
Stops playback.
Press p or q while playback is
stopped to go back to the previous
file or advance to the next file
respectively.
START AUTOMATICALLY
12/31/2050 10:00 AM
Playback starts automatically.
After playback ends, the playback repeats automatically.
Press p q during playback to go to the next file.
STOP
The playback time appears on
the LCD monitor along with a
progress bar.
MEMO
• Fast forward/Rewind and Skip playback function are not
available in this camera.
• If the subject of the shot is very bright, white vertical
streaks or black horizontal streaks may appear in the
image during playback. This is normal.
PAUSE
CAUTION
Progress bar
As for playback volume, please adjust from the [SET-UP]
menu. (➝p.102)
• You may not be able to play back some movie files
recorded on other cameras.
• To play back movie files on a PC, save the movie file on
the Memory Card or internal memory to the PC’s hard
disk and then play back the saved file.
• Uncover the speaker. The sound is difficult to hear.
Advanced Features — Movie
30s
Description
Pauses the movie during
playback.
Press o again to resume
playback.
101
[U SET-UP]
Using the [SET-UP] menu
1
Open the [SET-UP] menu.
Shooting mode: Open the [SHOOTING MENU] (➝p.67).
Playback mode: Open the [PLAYBACK MENU] (➝p.85)
3
Change the setting.
SET-UP
FORMAT
/LANG.
AUTO POWER OFF
TIME DIFFERENCE
BACKGROUND COLOR
5 MIN
2 MIN
A Select [U SETUP].
B Press MENU/OK to open the [SET-UP]
menu.
2
Change the page.
A Select the menu.
B Different type of screen appears
depending on selected item.
SET-UP
FORMAT
/LANG.
AUTO POWER OFF
TIME DIFFERENCE
BACKGROUND COLOR
ENGLISH
2 MIN
C Change the setting.
D Press MENU/OK to confirm the setting.
A Select the page.
B Move to menu item.
102
How to use the [SET-UP] menu (➝p.102)
SET-UP menu option
Setting
Display
Explanation
Page
Sets the way for displaying the check image screen
(photograph result) after taking a picture. The color
tones in images recorded may differ from actual
color. Play back the recorded images to check
them.
105
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin
again.
106
Specifies whether the Dual Image Stabilization
function is activated always at photography mode or
it is activated only when shutter button is pressed
down halfway.
107
107
[
IMAGE DISP.]
[3 SEC]/[1.5 SEC]/
[ZOOM
(CONTINUOUS)]
[1.5 SEC]
[
FRAME NO.]
[CONT.]/[RENEW]
[CONT.]
[
DUAL IS MODE]
[
ILLUMINATION]
[ON]/[OFF]
[ON]
Sets whether the illumination lamp lights at startup
and after shooting is complete.
[
DIGITAL ZOOM]
[ON]/[OFF]
[OFF]
Specifies whether digital zoom is used together.
107
[
LCD MODE]
Sets the LCD monitor display to the fine mode or
power save mode.
108
[
DATE/TIME]
[
[
CONTINUOUS]/
SHOOTING
ONLY]
/
–
–
Corrects the date or time.
25
–
Sets the volume of shutter volume, operation sound
and playback volume.
108
Sets the sound of shutter volume, start up sound
and operation sound.
109
[
VOLUME]
[SHUTTER VOLUME]/
[OPERATION VOL.]/
[PLAYBACK VOLUME]
[
SOUND]
[SHUTTER SOUND]/
[START UP SOUND]/
[OPERATION SOUND]
–
[
BLOG IMAGE SIZE]
[% STANDARD]/
[$ SMALL]
%
[
LCD BRIGHTNESS]
–
[0]
Sets the size for blog image when the image is
saved or transmitted.
82
Sets the LCD monitor brightness.
109
Continued Q
Settings
Factory default
103
[U SET-UP]
How to use the [SET-UP] menu (➝p.102)
Setting
[
Display
FORMAT]
[
–
]
[
AUTO POWER
OFF]
[
TIME
DIFFERENCE]
[
BACKGROUND
COLOR]
[
GUIDANCE
DISPLAY]
[
VIDEO SYSTEM]
[
IR
COMMUNICATION]
104
Factory default
–
[ENGLISH]
Explanation
Initializes a Memory Card or internal memory.
Select this menu to erase all the frames (files).
Specifies the language used for LCD monitor
display.
Page
110
26
Sets the time of turning camera off when camera is
not used.
110
Specifies the time difference settings.
111
[5 MIN]/[2 MIN]/[OFF]
[2 MIN]
N/I
N
–
–
[ON]/[OFF]
[ON]
Specifies whether guidance for function is displayed
or not.
[NTSC]/[PAL]
–
Specifies whether video output is set to [NTSC] or
[PAL].
–
[STANDARD]/[IrSS]
[STANDARD]
Specifies whether [
IR COMMUNICATION] is
set to [STANDARD] or [IrSS]. Select [STANDARD]
when communicating with a camera or printer,
select [IrSS] when communicating with a TV.
79
–
38
Specifies the colors of menu and background.
[
RESET]
–
–
Resets all the camera settings (other than the
[DATE/TIME], [TIME DIFFERENCE],
[BACKGROUND COLOR], [VIDEO SYSTEM], and
[SELECT FOLDER]) to the factory default values
set at shipment. A confirmation message appears
when you press q. To reset the camera settings,
press p or q to select OK and press MENU/OK.
[
PASSWORD]
–
–
Sets the password for the [PRIVATE] folder.
–
How to use the [SET-UP] menu (➝p.102)
[IMAGE DISP.]
C Press MENU/OK to take another picture.
The image is recorded automatically.
Use this setting to specify the way for displaying the check
image screen (photograph result) after taking a picture.
[3 SEC]/[1.5 SEC]:
The image appears for about 3 or 1.5 seconds
and is then recorded.
[ZOOM (CONTINUOUS)]:
The image appears enlarged. Use this mode to
check details of image.
CAUTION
Z Enlarging images
ZOOM (CONTINUOUS)
Navigation screen
(Current displayed image)
• When ` quality setting is selected, the image cannot
be enlarged.
• Press DISP/BACK to cancel the zoom setting.
• This function is disabled when setting the continuous
shooting.
• This function is disabled when selecting
in the
Shooting mode.
Intelligent Face Detection
For images taken with Intelligent Face Detection
(➝p.32), the displayed face switches to allow
confirmation each time you press
(Intelligent Face
Detection).
Press the W button (zoom out) or T button (zoom in) to
display the selected face zoomed in or out. Press n, o,
p, or q to display another part of the image.
Settings
• The color tones in images displayed when [3 SEC] or
[1.5 SEC] is selected may differ slightly from those in
the images actually recorded.
• [IMAGE DISP.] cannot be used when [h LONG
PERIOD] (➝p.72) is set.
MEMO
Continued Q
NEXT SHOOTING
A Press W or T to zoom in or out the image.
B Display another part of the image.
105
[U SET-UP]
How to use the [SET-UP] menu (➝p.102)
CHECK
[FRAME NO.]
Frame number
Use this function to specify whether frame numbers are
assigned consecutively from previous numbers or begin
again.
<CONT.>
File number
<RENEW>
A
B
* Formatted Memory Card or internal memory used for
both A and B.
[CONT.] : Pictures are stored beginning from the highest
file number stored on the last Memory Card or
internal memory used.
[RENEW] : Pictures are stored on each Memory Card
beginning with a file number 0001.
Each image will be numbered consecutively
from the last number used. So when recorded
images in the Memory Card are erased, the
number of the erased frame will not be used
again.
106
100 - 0001
12 / 31 / 2050
250
F3.8
10:00 AM
Directory number
The last 4 digits of the 7-digit number in the top right
corner of the LCD monitor are the file numbers, while
the first 3 digits show the directory number.
MEMO
• Setting this function to [CONT.] makes file management
easier as it makes sure that file names are not
duplicated when images are downloaded to a PC.
• When the camera settings are [
RESET] (➝p.104),
the frame number setting ([CONT.] or [RENEW]) is
changed to [CONT.] and the frame number itself does
not return to 0001.
• In [CONT.] setting, images are stored beginning from
the highest file number on the current Memory Card
when the Memory Card already contains image files
with file numbers higher than the highest file number on
the last Memory Card.
• The displayed frame number may differ for images
photographed on other cameras.
How to use the [SET-UP] menu (➝p.102)
[DUAL IS MODE]
[DIGITAL ZOOM]
Use this function to specify whether the Dual Image
Stabilization function is always active in photography
mode, or it is activated only when the shutter button is
pressed down halfway.
Use this function to shoot enlarged images than
maximum optical zoom scale.
[
CONTINUOUS]:
The Dual Image Stabilization function is activated
always at photography mode.
[
SHOOTING ONLY]:
The Dual Image Stabilization is activated only when
the shutter button is pressed down halfway.
Zoom bar
Z Zoom bar display
[ILLUMINATION]
[OFF]
Optical zoom: 5×
Settings
Use this function to specify whether the illumination lamp
lights at startup and after shooting is complete. When
turned ON, it indicates to the subjects of the picture that
shooting is complete.
[ON]
Optical zoom: 5×
Digital zoom:
Max.approx.5.7×
MEMO
When zooming changes between optical and digital, the
position of the “ ” indicator stops. Press the same Zoom
button again to start the “ ” indicator moving again.
Continued Q
107
[U SET-UP]
CAUTION
Using the digital zoom allows you to enlarge your subject
and shoot it. However, it will lower your image quality. Set
the digital zoom when requiring it.
How to use the [SET-UP] menu (➝p.102)
[VOLUME]
Use this function to adjust volume. The volume can be
selected from OFF, LEVEL 1, LEVEL 2, and LEVEL 3.
[LCD MODE]
VOLUME
SHUTTER VOLUME
Use this function to set the LCD monitor display to
standard mode or power save mode.
OPERATION VOL.
PLAYBACK VOLUME
[STANDARD]:
The images will be displayed finely on the monitor.
Be aware of the battery charge, since the camera
consumes more power.
[POWER SAVE]:
When this function is active, you can save power and
get the maximum possible running time from your
battery.
SET
CANCEL
A Select the volume type.
CAUTION
B Change the setting.
• The LCD MODE function is disabled during the Highspeed shooting mode and Movie mode.
• Select [POWER SAVE] when using the camera for a
long time in hot places. Using the camera in the
[STANDARD] setting in such circumstances may cause
vertical streaks on the LCD monitor due to CCD
characteristics.
C Press MENU/OK to confirm the setting.
As for Playback volume, use no to adjust volume level
from 0 to 10.
VOLUME
7
SET
108
CANCEL
How to use the [SET-UP] menu (➝p.102)
[SOUND]
[LCD BRIGHTNESS]
Use this function to adjust the sound.
Use this function to adjust the LCD monitor brightness.
SOUND
SHUTTER SOUND
1
START UP SOUND
1
OPERATION SOUND
2
SET
CANCEL
[SHUTTER SOUND]:
,
[START UP SOUND]:
,
,
[OPERATION SOUND]:
,
,
A Select the sound type.
C Press MENU/OK to confirm the setting.
0
SET
CANCEL
A Adjust the LCD monitor brightness.
The indicator moves to the + to display the
LCD monitor brightly or to the – to darken
the LCD monitor.
B Press MENU/OK to confirm the setting.
Settings
B Change the setting.
LCD BRIGHTNESS
Continued Q
109
[U SET-UP]
How to use the [SET-UP] menu (➝p.102)
[FORMAT]
[AUTO POWER OFF]
Initialize (format) the Memory Card or internal memory for
use with the camera.
When this function is active and the camera remains
unused for 2 or 5 minutes, it turns camera off.
Use this function when you want to get the maximum
possible running time from your battery.
FORMAT
FORMAT OK?
ERASE ALL DATA
OK
CANCEL
SET
Place of initialize
[Y FORMAT OK?]:
Internal memory
[\ FORMAT OK?]:
Memory Card
CAUTION
The Auto power off function is disabled during slide shows
(➝p.86), and when a printer or a PC connection (➝p.114,
123) is being used.
MEMO To restore power to the camera
A Select [OK].
B Pressing MENU/OK initializes the Memory
Card or internal memory.
CAUTION
• The Format function erases all the frames (files),
including protected frames (files).
Back up important frames (files) onto your PC or
another media.
• Do not open the battery cover during formatting, as
formatting will be interrupted.
110
To take pictures, close the lens cover completely and then
reopen it (➝p.21). To play back images, hold down w for
about 1 second (➝p.21).
How to use the [SET-UP] menu (➝p.102)
2
[TIME DIFFERENCE]
Use this function when traveling to destinations in
different time zones. This function sets a time difference
relative to the date and time currently set. When this
setting is enabled, the specified time difference is applied
when pictures are taken.
1
Move to [TIME DIFFERENCE] screen.
SET-UP
FORMAT
/LANG.
AUTO POWER OFF
TIME DIFFERENCE
BACKGROUND COLOR
Use Time difference function.
HOME
LOCAL
SET-UP
FORMAT
/LANG.
AUTO POWER OFF
TIME DIFFERENCE
BACKGROUND COLOR
[TIME DIFFERENCE] screen appears.
HOME
LOCAL
Set time difference.
TIME DIFFERENCE
12 / 31 / 2050
12 / 31 / 2050
SET
10:00 AM
10:00 AM
Settings
Change between [N HOME] and [I
LOCAL].
To set the time difference, select [I LOCAL].
[N HOME]: Your home time zone
[I LOCAL]:Your destination time zone
3
CANCEL
A Select +/–, hour, and minute.
B Change the setting.
Continued Q
111
[U SET-UP]
How to use the [SET-UP] menu (➝p.102)
C Always press MENU/OK after the settings
are completed.
CHECK
Available time setting
–23:45 to +23:45 (in 15-minute increments)
MEMO
12 / 31 / 2050
11:00 AM
In the time difference
setting, when you change to
the Shooting mode, I and
the date is displayed for 3
seconds, the date display
turns yellow.
CHECK
Upon returning from a trip, always change the time
difference setting back to [N HOME] and then check the
date and time again.
112
Connecting to a TV
When connecting to a TV, images can be displayed on wider screen. You can enjoy using the slide show function (➝p.86) at
parties and other gatherings.
A Plug the A/V cable (included)
into the multi-connector
adapter connection socket on
the camera.
Video (yellow)
To terminals
Audio (white)
B Plug the other end of the cable
into the audio/video input socket
on the TV.
MEMO
• Plug the A/V cable (included) correctly and push it in the
terminal.
• See “Basic Manual” (included) for information on the AC
power adapter.
• When connecting the A/V cable (included) to TV, the
LCD monitor is turned off.
• The image quality for movie playback is lower than for
still images.
• When connecting to a TV, even if you adjust the volume
from the [
PLAYBACK VOLUME], the TV volume
cannot be changed. Refer to the instructions provided
with your TV for more information on audio/video input
for your TV.
• Use the AC-5VX (sold separately) and CP-45 (sold
separately) when FinePix Z200fd is connected to a TV
for long periods.
Camera Connection
CAUTION
113
Connecting Camera Directly to Printer — PictBridge Function
When a printer that supports PictBridge is
available, images can be printed by connecting
the camera directly to the PictBridgecompatible printer without a PC.
2
[
USB] appears on
the LCD monitor.
USB
Connecting to a printer
1
Connect the camera to a printer and turn the
printer on. Press w for about 1 second to
turn the camera on.
Connect the camera to your printer using
the USB cable.
3
The following screen appears on the LCD
monitor after a moment.
“Specifying images for
printing”
➝p.115
“Printing with DPOF setting”
➝p.116
PICTBRIDGE
TOTAL : 00000
00 SHEETS
MEMO
Use the AC-5VX (sold separately) and CP-45 (sold
separately) when FinePix Z200fd is connected to a
printer.
FRAME
OK
SET
MEMO
Depending on the printer, some functions are disabled.
114
Specifying images for printing
(PRINT WITH DATEE / PRINT
WITHOUT DATE)
PRINT THESE FRAMES
TOTAL : 9 SHEETS
PICTBRIDGE
TOTAL : 00002
YES
D Press MENU/OK again to download the
data to the printer and start printing the
specified number of prints.
02 SHEETS
FRAME
OK
CANCEL
SET
MEMO
Even if MENU/OK is pressed with total number of images set
at 0 (zero), the screen printing once appears on the LCD
monitor. Press MENU/OK again and printing starts.
B Set a value.
Up to 99 sheets are printed.
MEMO Printing with date
PICTBRIDGE
To specify more PRINT settings, repeat steps A and B.
C Press MENU/OK to display the confirm
setting.
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
A Press DISP/BACK to
display the setting
display.
B Select [PRINT WITH
DATEE].
Camera Connection
A Display the frame (file) for specifying
PRINT setting.
C Press MENU/OK.
CAUTION
[PRINT WITH DATEE] is not available when the camera
is connected to a printer that does not support date
printing.
115
Connecting Camera Directly to Printer — PictBridge Function
Printing with DPOF setting
([u PRINT DPOF])
PRINT DPOF OK?
TOTAL : 9 SHEETS
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
YES
CANCEL
D Press MENU/OK again to download the
data to the printer and start printing the
specified frames (files) continuously.
A Press DISP/BACK to open the menu.
CHECK
To select [u PRINT DPOF], the DPOF settings must be
specified on FinePix Z200fd beforehand (➝p.92).
B Select [u PRINT DPOF].
C Press MENU/OK to display the confirm
setting.
116
CAUTION
Even when [WITH DATEE] is specified in the DPOF
settings (➝p.92), the date is not inserted on printers that
do not support date printing.
MEMO
MEMO
PRINTING
DPOF setting can be specified for images on internal
memory.
CAUTION
CANCEL
Press DISP/BACK to cancel the printing.
Depending on the printer, the printing may not be
canceled immediately or printing may stop midway
through.
When printing stops midway, press w to turn the camera
off and then on again.
Camera Connection
Disconnecting the printer
A Check that [PRINTING] is not displayed on the
camera’s LCD monitor.
B Press w to turn the camera off. Unplug the USB
cable.
• In PictBridge function, images photographed on other
than a camera may not be printed.
• The camera cannot be used to specify printer settings
such as the paper size and print quality.
• Use internal memory or a Memory Card that was
formatted on FinePix Z200fd.
• Movies cannot be printed.
• Images photographed with a camera other than FinePix
Z200fd may not be printed.
117
Installation on a Windows PC
Pre-installation checklist
Z Hard ware (software) requirements and recommended system
To run this software, you must have the hardware and software described below. Check your system before you begin the installation.
requirement
Recommendation
Windows XP
Windows Vista
Operating System*1
Windows 2000 Professional (Service Pack 4 or later)*2
Windows XP Home Edition (Service Pack 2 or later)*2
Windows XP Professional (Service Pack 2 or later)*2
Windows Vista*2
CPU
200 MHz Pentium minimum
(Windows XP/Vista users: 800MHz Pentium 4 or better recommended)
2 GHz Pentium
4 or better
3 GHz Pentium
4 or better
RAM
128 MB minimum (512 MB minimum for Windows Vista)
512 MB or better 1 GB or better
Hard disk space
Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
2 GB or better
800 × 600 pixels or better, 16-bit color or better
1024 × 768 pixels or better,
Highest (32 bit)
Display
Other
15 GB or better
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet
connection and e-mail software required to use e-mail option
*1 Models with one of the above operating systems pre-installed.
*2 When you install the software, login using a system administrator account (e.g. [Administrator]).
CAUTION
• Windows 95, Windows 98, Windows 98 SE, Windows Millennium Edition (Windows Me), and Windows NT cannot be used.
• Operation is not guaranteed on home-built PCs or on PCs running updated operating system software.
• When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for the FinePix Internet Service are
deleted from your PC. Click the [Register now] button, enter your registered user ID and password and download the menu again.
• Folder titles are created with the language selected on the camera. When the set language of the PC and camera differ, folder
titles may not be displayed correctly.
118
Do not connect the camera to your PC
until the software installation is
completed.
1
Install FinePixViewer as instructed by the
on-screen instructions.
For Windows Vista users:
When loading the bundled CD-ROM on your PC, the
[AutoPlay] window may appear. In this case, click
[SETUP.exe].
When [User Account Control] window appears, click
[Allow].
2
Launching the installer manually
A Double-click the [My Computer] icon.
* Windows XP users should click [My Computer] in the [Start]
menu.
Windows Vista users should click [Computer] in the [Start]
menu.
B Right-click [FINEPIX] (CD-ROM drive) in the [My
Computer] window (Windows Vista users: in the
[Computer] window) and select [Open].
C Double-click [SETUP] or [SETUP.exe] in the CD-ROM
window.
CAUTION
• If the latest version is already installed, the on-screen
instruction does not appear and the installation is not
performed.
• Do not remove the CD-ROM during this procedure.
depending on your PC settings.
-File extensions (3-letter suffixes indicating the file type)
may be shown or hidden. (e.g. Setup.exe or Setup)
-Text may be shown normally or all in uppercase (e.g. Setup
or SETUP).
After restarting the PC, a message appears
stating [Installation of the FinePixViewer
has been completed].
Software Installation
3
* The way file names are displayed differs as described below
Install Media Player, QuickTime, or DirectX
following the on-screen instructions and
then restart your PC. If the latest version is
already installed, the on-screen instruction
does not appear and the installation is not
performed.
119
Installation on a Mac OS X
Pre-installation checklist
Z Hardware and software requirements
To run this software, you must have the hardware and software described below. Check your system before you begin the installation.
Compatible Mac*1
Power Macintosh G3*2, PowerBook G3*2,
Power Macintosh G4, iMac, iBook,
Power Macintosh G4 Cube, PowerBook G4, Power Macintosh G5,
MacBook, MacBook Pro, Mac mini, or Mac Pro
Operating System
Mac OS X (compatible with version 10.3.9 to 10.4.11)
RAM
256 MB minimum
Hard disk space
Amount required for installation: 200 MB minimum
Amount required for operation: 400 MB minimum
Display
800 × 600 pixels or better, at least 32,000 colors
Other
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
• Internet connection (56 kbps or faster recommended) required to use FinePix
Internet Service; Internet connection and e-mail software required to use e-mail
option*3
*1 PowerPC, Intel processor loaded
*2 Models with a USB port as a standard feature
*3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
CAUTION
• Connect the camera directly to the Macintosh using the USB cable (included). The software may not operate correctly if you use
an extension cable or connect the camera via a USB hub.
• Push the USB connector fully into the socket to ensure that it is securely connected. The software may not operate correctly if the
connection is faulty.
120
1
Turn your Macintosh on and start up Mac
OS X. Do not launch any other applications.
2
When the bundled CD-ROM is loaded into
the CD-ROM drive, the [FinePix] icon
appears. Double-click the [FinePix] icon to
open the [FinePix] volume window.
3
4
Double-click on [Installer for MacOS X].
The Installer setup dialog appears. Click the
[Installing FinePixViewer] button.
CAUTION
For more information on what is installed, click the [Read
Me First] button and [Using FinePixViewer] button.
5
The [Authenticate] dialog appears.
Enter the name and password for the
administrator account and then click the
[OK] button.*
* The administrator account is the user account used for
Mac OS X installation and you can confirm the user
account in the Accounts dialog in the System
Preferences.
6
Install FinePixViewer as directed by the onscreen instructions.
Continued Q
Software Installation
121
Installation on a Mac OS X
7
The [FinePixViewer installation completed]
message dialog appears. Then click exit
button and close it. If the latest version of
QuickTime has not been installed,
QuickTime will be installed after installing
FinePixViewer.
10 Select [Other...] from [When a camera is
connected, open].
11 Select [FPVBridge] from [FinePixViewer]
folder in the [Applications] folder and click
the [Open] button.
CAUTION
When Safari is used as the Web browser, a message may
be displayed and the CD-ROM may not be removed. If
this happens, click the Safari icon in the Dock to make
Safari the active application and then select [Quit Safari]
in the [Safari] menu to shut down Safari.
122
8
Launch [Image Capture] from the
[Applications] folder.
9
Change the Image Capture settings.
Select [Preferences...] from the [Image
Capture] menu.
12 Select [Quit Image Capture] menu in the
[Image Capture] menu.
Connecting to a PC
By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
“FinePixViewer” performs images saving, browsing and
file management etc.
FinePixViewer Overview
Enables importing images, managing files and folders,
and ordering prints using the internet (only Windows
users).
Z Operation of image transmission by USB
(Windows only)
Images in this camera are saved in a sub folder according
to the folder category when transmitting to a PC using
FinePixViewer.
When returning images from a PC to the camera, they are
saved in the [MY PICTURES] folder.
A Insert the Memory Card with images into the camera
(➝p.18).
You can use the xD-Picture Card and the SD
Memory Card with the FinePix Z200fd.
In this manual, these cards are expressed as
“Memory Card”.
CAUTION
• Do not format the Memory Card for the camera on the
PC.
• Use the Memory Card with images taken by a
FUJIFILM Digital camera.
B Connect the camera to your PC using the USB cable
(included).
CAUTION
Refer to Software
Installation (➝p.118, 120)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
C Press w for about 1 second to turn the camera on in
Playback mode.
D Set your PC
CD-ROM
(Software for FinePix)
Software Installation
The Windows CD-ROM may also be required during
installation. In this event, change CD-ROMs as directed
by the on-screen instructions.
MEMO
In Windows, if FinePixViewer is already installed, the
driver will be set automatically. No action is required.
Continued Q
123
Connecting to a PC
124
CAUTION
CAUTION
• FinePix Z200fd is compatible with PTP (Picture
Transfer Protocol)/MTP (Media Transfer Protocol). A
PTP/MTP-compatible camera is a camera that can
recognize the PC and printer automatically when
connected.
• Do not disconnect the USB cable (included) when the
camera is communicating with a PC. If the USB cable
(included) is disconnected during communication, the
files on the Memory Card or internal memory may be
damaged.
• In Mac OS X, you must set automatic setup the first time
you connect the camera to your PC.
• When the camera and PC are exchanging data, the
indicator lamp blinks alternately green and orange.
• Auto power off is disabled during USB connection.
• Before replacing the Memory Card, always disconnect
the camera from the PC.
• The camera and PC may be exchanging data even
when [Copying] disappears from your PC screen.
Before disconnecting the USB cable (included), always
check that the indicator lamp is off.
• Always use FinePixViewer to transfer images with voice
memos to a PC.
• The cost of an Internet provider for connecting to the
internet is the user’s responsibility.
• When using FinePixViewer to save images on a data
server (network), FinePixViewer may not run as it would
in a standalone PC environment.
• Always use the FUJIFILM AC Power Adapter AC-5VX
(sold separately) and DC coupler CP-45 (sold
separately). If the camera suddenly loses power during
data exchange, data exchange will not be performed
correctly, and the Memory Card or internal memory
could be damaged.
• Make sure that the USB cable (included) is connected
correctly and securely.
• Connect the camera directly to the PC using the USB
cable (included). The software may not operate
correctly when you use an extension cable, or if you
connect the camera via a USB hub.
• When your PC has more than one USB port, the
camera can be connected to either port.
• When Windows 98 SE is used, the supplied software
must be installed first before connecting the camera to
a PC using the USB cable. The PC will not recognize
the camera if it is connected before installation.
• A Memory Card, the internal memory, data in a Memory
Card or data in the internal memory could be damaged
if any of the following are performed;
- the USB cable is disconnected
- ON/OFF switch or buttons are pressed, or the lens
cover is interfered with
The following steps differ depending on the
PC’s operating system (Windows XP/Vista and
Mac OS X case)
When your PC recognizes the camera automatically,
FinePixViewer automatically starts up and the Save
Image Wizard window (Save Image dialog box) appears.
Follow the instructions provided on screen to save the
images. To proceed without saving the images, click the
[Cancel] button.
CAUTION
• You can only see images saved on a PC. Save images
on a PC.
• If you cancel saving by clicking the [Cancel] button,
close the lens cover to turn off the camera and then
disconnect it from the PC.
• When the camera is connected to your PC,
FinePixViewer automatically starts up by the function of
Exif Launcher, which is installed in FinePixViewer.
Proceed to “Using FinePixViewer” (➝p.126).
CAUTION (Mac OS X)
If FinePixViewer does not start up automatically, the
software may not be installed correctly. Set your PC again
after disconnecting the camera and restart.
CAUTION (Mac OS X)
Note on disconnecting the camera
• Close all files in the camera, and make sure the camera
is not exchanging data.
• The camera and PC may be exchanging data even
when [Copying] disappears from your PC screen,
especially in the case of copying large data amounts.
Do not disconnect the USB cable (included),
immediately after this message has disappeared.
Always check that the indicator lamp is off first before
disconnecting.
Software Installation
• When there are many images stored on a Memory
Card, it takes a while to display on the screen of your
PC. Also, it may take a while to import images or you
may be unable to save images. In this case, use an
Image Memory Card Reader.
• Folder titles are created with the language selected on
the camera. When the set language of your PC and
camera differ, folder titles may not be displayed
correctly.
• Images in the internal memory cannot be saved on your
PC if a memory card is inserted in the camera. Before
connecting the camera to your PC, remove the memory
card from the camera to save images in the internal
memory to your PC.
MEMO
125
Connecting to a PC
Using FinePixViewer
Mastering FinePixViewer
For all information on FinePixViewer functions, refer to
[How to Use FinePixViewer] in the Help menu for details.
• What is explained in [How to Use FinePixViewer]...
[How to Use FinePixViewer] covers a range of topics,
including batch processing and ordering prints.
Example: Looking up slide shows
A Click [How to Use FinePixViewer] in the FinePixViewer
Help menu.
B Click [Basic Operation] and then click [Slide Show] in
the menu that appears.
C The [Slide Show] information appears. Press the [<<<]
key to view the previous page or the [>>>] key to view
the next page.
Uninstalling the software
Only perform this operation when you no longer require
the installed software or when the software was not
installed correctly.
Windows
A Check that the camera is not connected to the PC.
B Quit all currently running applications.
C The steps for uninstalling software differ depending on
the operating system. Follow the steps for each
operating system to uninstall the software listed below.
The following software is to be uninstalled:
• FinePixViewer
• FinePix Resource
• FinePix Studio*
• RAW FILE CONVERTER LE*
* May not have been installed depending on the
operating system.
To remove FinePixViewer
5
To remove the driver
software
126
5
D When the message appears, click the [OK] button.
Check your selection carefully since the process
cannot be canceled once you click the [OK] button.
Macintosh
Quit FinePixViewer. Then drag the FinePixViewer folder
in the application folder to the Trash and select [Empty
Trash] in the [Finder] menu.
Software Installation
127
System Expansion Option
By using FinePix Z200fd together with other optional FUJIFILM products, your system can be expanded to fill a wide range of
uses.
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
Z Audio/Visual
Z Image
output
TV monitor
(commercially available)
input/output to the PC
USB
Personal Computer
(commercially available)
Audio/Visual
output
PC Card Adapter DPC-AD
(PC card slot)
Z Printing
* This will not work with an
USB
SD Memory Card.
xD-Picture
Card
PictBridge-compatible printer
SD/SDHC
Memory Card
Printer
(commercially available)
CompactFlash™
Card Adapter DPC-CF
DPC-C
F
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
for
xD-P
icture
Card
(CF card slot)
* This will not work with an SD
Memory Card.
128
Accessories Guide
Visit the FUJIFILM web site for the latest information on camera accessories.
http://www.fujifilm.com/products/digital_cameras/index.html
Accessory availability may vary by country. Please check with your local Fujifilm representative to confirm product availability.
• xD-Picture Card
Use the following xD-Picture Cards:
256MB/512MB/1GB/2GB
There are two types of xD-Picture Card: standard type and Type M (containing “M” in the model
number, such as DPC-M1GB).
FinePix Z200fd is compatible with Type M, however they may not be compatible depending on the
device used (Image Memory Card Reader, etc.).
• Rechargeable Battery NP-45 (750 mAh)
A Lithium-ion slimline rechargeable battery
• AC Power Adapter AC-5VX
Use the AC-5VX when taking pictures or play back images for long periods or when FinePix
Z200fd is connected to a PC.
Use AC-5VX AC adapter with CP-45 DC Coupler together for FinePix Z200fd.
* The shape of the AC power adapter, the plug, and power outlet depend on the country.
• PC Card Adapter DPC-AD
The PC Card Adapter allows the xD-Picture Card and SmartMedia to be used as a PC Card Standard
ATA-compliant (PCMCIA 2.1) PC card (Type u).
-Compatible with xD-Picture Card of 16 MB to 512 MB, and SmartMedia of 3.3 V, 2 MB to 128 MB.
This is not compatible with the SD Memory Card.
Appendices
• DC Coupler CP-45
Use the CP-45 with AC-5VX when taking pictures or play back images for long periods or when FinePix Z200fd
is connected to a PC.
Continued Q
129
Accessories Guide
• CompactFlash™ Card Adapter DPC-CF
Loading an xD-Picture Card into this adapter allows you to use the card as a CompactFlash card (Type s).
-This is not compatible with the SD Memory Card.
DPCCF
CO
MPAC
CARD
TFLA
ADAP
SH TM
TER
for
xD-P
ictur
e Card
• Waterproof Case WP-FXZ100
This waterproof case protects your FinePix Z200fd from water damage yet allows you to make camera
adjustments and use the flash.
Dive up to 40 meters (131 feet) underwater with your FinePix Z200fd digital camera.
• Soft case
This is a special case made of polyurethane that protects the camera against soil, dust, and minor impacts when it is being carried.
130
Using Your Camera Correctly
Read this information and the “Safety Notes” (➝“Basic
Manual”), to make sure you use your camera correctly.
Z Places to Avoid
Do not store or use the camera in the following types of
locations:
• In the rain or in very humid, dirty, or dusty places
• In direct sunlight or in places subject to extreme
temperature rises, such as in a closed car in summer
• Extremely cold places
• Places with strong vibration
• Places with smoke or steam
• Places subject to strong electric magnetic fields (such
as near broadcasting tower, power lines, radar, motors,
transformers, magnets, etc.)
• In contact with chemicals such as pesticides
• Next to rubber or vinyl products
Z Damaged by Water or Sand
FinePix Z200fd can be damaged on the inside and
outside by water and sand. When you are at the beach or
close to water, make sure that the camera is not damaged
by water or sand. Take care not to place the camera on a
wet surface.
Z Cleaning Your Camera
• Use a blower brush to remove any dust on the lens or
LCD monitor, and then gently wipe the camera with a
soft, dry cloth. If any soil remains, apply a small amount
of lens cleaning liquid to a piece of FUJIFILM lens
cleaning paper and wipe gently.
• Do not scratch hard objects against the lens or LCD
monitor.
• Clean the body of the camera with a soft, dry cloth. Do
not use volatile substances or cleaning products these
items can cause damage.
Z Using the Camera When Traveling
When traveling overseas, do not place your camera in the
check-in baggage. Baggage can be subjected to violent
shocks, and the camera may be damaged inside or
outside.
Appendices
Z Damaged by Condensation
If the camera is carried from a cold location into a warm
place, water droplets (condensation) may form on the
inside of the camera or on the lens. When this occurs, turn
the camera off and wait an hour before using the camera.
Condensation may also form on the Memory Card. In this
event, remove the Memory Card and wait a short time.
Z When the Camera is Not Used or is stored Periods
of Time
If you do not intend to use the camera for a long period of
time, remove the battery and the Memory Card.
131
Notes on the xD-Picture Card™, the SD Memory Card and the Internal Memory
Z Handling Memory Card
• When inserting the Memory Card into the camera, hold
the Memory Card straight as you push it in.
• Never remove the Memory Card or turn the camera off
during data recording or erasing (Memory Card
formatting) as this could be damaged to the Memory
Card.
• The use of xD-Picture Cards is recommended with
FinePix Z200fd.
The recording quality cannot be guaranteed when xDPicture Cards other than those manufactured by
FUJIFILM are used.
• The Memory Card may feel warm when it is removed
from the camera after taking pictures. This is normal.
• Do not put labels on the Memory Card. Peeling labels
can cause the camera not to work properly.
MEMO Type M and H of xD-Picture Card
• Type M
There are two types of Memory Card: standard type and
Type M (containing “M” in the model number, such as
DPC-M2GB).
FinePix Z200fd is compatible with Type M.
• Type H
Type H and M share the same compatibility.
• Usable USB drive
Type H cannot be used with xD-Picture Card USB
drive DPC-UD1, while Type M can.
132
Z Internal Memory
• Images held in the camera’s internal memory may be
corrupted or erased due to problems such as camera
faults. Save your important data to another media (i.e.,
DVD-R, CD-R, CD-RW, hard disk, etc.).
• Data stored in the camera’s internal memory cannot be
guaranteed in the event that the camera is submitted for
repairs.
• When the camera is repaired, any data stored in the
camera’s internal memory is subject to checking by the
repairer.
Z Using Memory Card or Internal Memory with a PC
• When taking pictures using a Memory Card or internal
memory that has been used on a PC, reformat the
Memory Card using your camera.
• When formatting, a directory (folder) is created. Image
data is then recorded in this directory.
• Do not change or delete the directory (folder) or file
names on the Memory Card or internal memory
because this will make it impossible to use the Memory
Card or internal memory in your camera.
• Always use the camera to erase image data.
• To edit image data, copy or transfer the image data to
the PC and edit the copied or transferred data.
Warning Displays
The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed
(Lit red)
V (Blinking red)
{
Explanation
Charge the battery or load fully charged battery.
There is a strong likelihood of camera shake
because the shutter speed is slow.
Use flash photography. We recommend using a
tripod.
The AF (autofocus) cannot work effectively.
• If the image is too dark, take the picture at a
distance of around 2 m (6.6 ft.) from the subject.
• Use AF lock to take the picture (➝p.34).
• Select Macro mode when taking close-up shots.
The camera cannot shoot the picture at the correct
brightness due to too bright or dark shooting
condition.
The picture can be taken, but the correct brightness
(exposure) will not be obtained.
Camera malfunction or fault.
• Turn the camera on again, taking care not to touch
the lens.
• Turn the camera off and on again. If the message
still appears, contact your FUJIFILM dealer.
(Lit red)
*The shape of the AF
frame differs depending
on the setting in the
[SHOOTING MENU].
Aperture/
Shutter speed display
(Lit red)
[FOCUS ERROR]
Remedy
The battery is low or completely out of charge.
[ZOOM ERROR]
[LENS CONTROL
ERROR]
A memory card is not inserted.
Insert a Memory Card.
• The Memory Card or internal memory is not
formatted.
• The Memory Card contact area is soiled.
• Format the Memory Card or internal memory on
the camera (➝p.110).
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.110). If the message still
appears, replace the Memory Card.
• Contact your FUJIFILM dealer.
[CARD NOT INITIALIZED]
• Camera fault.
Appendices
[NO CARD]
133
Warning Displays
Warning Displayed
Explanation
• The Memory Card contact area is soiled.
• The Memory Card format is incorrect.
[CARD ERROR]
• Camera fault.
• The Memory Card is damaged.
[\ MEMORY FULL]
The internal memory or Memory Card is full.
[Y MEMORY FULL]
[WRITE ERROR]
The timing for recording was incorrect because the
Memory Card was formatted on a PC.
The frame number has reached 999-9999.
[FRAME NO. FULL]
134
Erase some images in internal memory or Memory
Card (➝p.44), or use a Memory Card that has ample
free space.
• The data could not be recorded due to a Memory • Re-insert the Memory Card or turn the camera off
Card error or a connection error between the
and then on again. If the message still appears,
Memory Card and camera.
contact your FUJIFILM dealer.
• The image cannot be recorded as it is too large to • Use a new Memory Card.
fit in the available space on the Memory Card.
• Format the Memory Card or internal memory on
• The Memory Card or internal memory is not
the camera (➝p.110).
formatted.
[INTERNAL MEMORY IS The data could not be recorded or copied since the
FULL
internal memory is full.
INSERT A NEW CARD]
[BUSY]
Remedy
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.110). If the message still
appears, replace the Memory Card.
• Contact your FUJIFILM dealer.
Erase some images from the internal memory
(➝p.44), or use a Memory Card that has ample free
space.
Use a Memory Card that was formatted on the
camera.
A Insert a formatted Memory Card into the camera.
B Set [RENEW] as the [FRAME NO]. setting in the
[SET-UP] menu (➝p.106).
C Start taking pictures (The frame number starts
from “100-0001”).
D Set [CONT.] as the [FRAME NO.] setting in the
[SET-UP] menu.
Warning Displayed
Explanation
Remedy
• The played back file was not recorded correctly.
• The Memory Card contact area is soiled.
[READ ERROR]
• This file cannot be played back.
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.110). If the message still
appears, replace the Memory Card.
• Camera fault.
• Contact your FUJIFILM dealer.
• An attempt was made to play back the image or the • The movie and image cannot be played back.
movie that was not recorded on this camera.
[TOO MANY FRAMES]
An attempt was made to show 5,000 or more image No more than 4,999 images can be shown by date
by date sorting.
sorting.
• An attempt was made to erase a protected file.
[PROTECTED FRAME]
[PROTECTED CARD]
[PASSWORD
INCORRECT]
[# ERROR]
[\ NO IMAGE]
[Y NO IMAGE]
[CAN NOT TRIM]
[
CAN NOT TRIM]
The SD Memory Card switch is slide to the “Lock”
side.
Unlock the protection by sliding it back (➝p.19).
The wrong password was entered.
Set the password again.
• The voice memo file is faulty.
• Camera fault.
• The voice memo cannot be played back.
• Contact your FUJIFILM dealer.
An attempt was made to transfer images from the
Memory Card or internal memory that memory was
empty.
It is impossible to copy.
An attempt was made to trim a 0.3M image.
The image cannot be trimmed.
• An attempt was made to trim an image shot using The image cannot be trimmed.
a camera other than FinePix Z200fd.
• The image is damaged.
An attempt was made to trim a blog image.
Appendices
[` CAN NOT TRIM]
• An attempt was made to add a voice memo to
protected file.
• Protected files cannot be erased. Remove the
protection (➝p.88).
• Protected files cannot be added to voice memos.
Remove the protection (➝p.88).
The image cannot be trimmed.
Continued Q
135
Warning Displays
Warning Displayed
[DPOF FILE ERROR]
[CAN NOT SET DPOF]
Explanation
Remedy
Prints were specified for 1000 or more frames in the The maximum number of frames for which prints can
DPOF frame settings.
be specified on the same Memory Card is 999.
Copy the images for which you want to order prints
onto another Memory Card and then specify the
DPOF settings.
An attempt was made to specify DPOF settings for
an image that is not supported by DPOF.
DPOF printing cannot be used with this image
format.
[r CAN NOT SET DPOF]
[CAN NOT ROTATE]
An attempt was made to rotate a movie or an image These images cannot be rotated by image formats.
shot using a camera other than FinePix Z200fd.
[r CAN NOT ROTATE]
[r CANNOT EXECUTE] An attempt was made to transmit or save an image Some image formats cannot be transmitted or saved
or movie recorded with another device, or an image with TRIMMING FOR BLOG.
[ CANNOT EXECUTE] that cannot be played back, with TRIMMING FOR
BLOG.
[
CANNOT EXECUTE]
[
CANNOT EXECUTE]
An attempt was made to resave an image that was
saved with [TRIMMING FOR BLOG].
Images saved with [TRIMMING FOR BLOG] cannot
be resaved.
An attempt was made to take a picture in
CANNOT EXECUTE] [
AUCTION MODE] while
appeared in the
LCD monitor.
Charge the battery or replace with a charged battery.
[
[PRESS AND HOLD THE An attempt was made to set flash or sound in Silent Flash or sound cannot be set in the Silent mode.
mode.
Release the Silent mode to set flash or sound.
DISP BUTTON TO
DEACTIVATE SILENT
MODE]
The camera is not connected to a PC or printer.
[COMMUNICATION
ERROR]
136
• Check that the USB cable is connected correctly.
• Check that your PC or printer is turned on.
• When using IR communication, make sure the
camera and the other device are transmitting and
receiving within the image transmission range.
Warning Displayed
[CANNOT BE
TRANSMITTED]
[CANNOT BE
RECEIVED]
Explanation
Do not move the camera out of the transmission
distance. Do not place anything between the
transmitting and receiving devices.
Displayed for PictBridge.
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Displayed for PictBridge.
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
Displayed for PictBridge.
• Refer to the user manual for the printer being used
and check whether the printer supports the JFIFJPEG or Exif-JPEG image format. If not, the printer
cannot print the images.
• Movie images cannot be printed.
• Was the image data photographed using FinePix
Z200fd?
You may not be able to print some images
photographed on other cameras.
[PRINTER ERROR
RESUME?]
Appendices
Transmission was disconnected during IR
communication.
[PRINTER ERROR]
[CANNOT BE PRINTED]
Remedy
• An attempt was made to send a movie or an image • The image format is not transmittable.
shot by the camera other than FinePix Z200fd (
• A movie can not be sent.
is displayed).
• Transmission was disconnected during IR
• Do not move the camera out of the transmission
communication.
distance. Do not place anything between the
transmitting and receiving devices.
137
Troubleshooting
Z Getting ready
Matters
Problems
Possible causes
The battery has run out.
Nothing happens
when opening the The battery is loaded backward.
lens cover
The battery cover is not closed securely.
completely.
The AC power adapter and DC coupler are
not connected correctly.
Battery and power
supply
Battery runs out
quickly.
Power cuts out
during operation.
138
Solutions
Charge the battery or load fully charged
battery.
Page
14, 16
Load the battery in the corrected direction.
16
Close the battery cover securely.
17
Connect the AC power adapter and DC
coupler correctly.
–
Camera is used in extremely cold
conditions.
Put the battery in your pocket or another
warm place to heat it and then load it into 15, 16
the camera just before you take a picture.
The terminals are soiled.
Wipe the battery terminals with a clean,
dry cloth.
Same battery has been used for a long
period.
The battery can no longer be recharged.
Load a new battery.
15, 16
The battery has run out.
Charge the battery or load fully charged
battery.
14, 16
The AC power adapter and DC coupler are Connect the AC power adapter and DC
not connected correctly.
coupler correctly.
–
Matters
Problems
Possible causes
Charging does not There is no battery in the camera.
begin.
The battery is loaded backward.
Charging a battery
The charging
indicator blinks
during charging
and the battery
won’t charge.
The battery terminals are soiled.
The battery can no longer be recharged.
Solutions
Page
Load the battery.
16
Load the battery in the correct direction.
16
Take the battery out briefly and wipe the
battery terminals with a clean, dry cloth
before reloading it.
–
Load a new battery. If the battery still fails
to charge, contact your FUJIFILM dealer.
–
Solutions
Page
Z Setting menu etc.
Matters
LCD monitor
display
Problems
Screens are not
displayed in
English.
Possible causes
A language other than English is selected Select [ENGLISH].
in the [
] setting in the [SET-UP]
menu.
26
Continued Q
Troubleshooting
139
Troubleshooting
Z Shooting
Matters
Basic operations
Problems
No photograph is
taken when
pressing the
shutter button.
Possible causes
Solutions
Insert a new Memory Card or erase some
18, 44
unnecessary frames.
The Memory Card or internal memory is
not formatted.
Format the Memory Card or internal
memory on the camera.
The Memory Card contact area is soiled.
Wipe the Memory Card contact area with a
soft, dry cloth.
18
The Memory Card is damaged.
Insert a new Memory Card.
18
The battery has run out.
Charge the battery or load fully charged
battery.
The Auto power off function has turned the Turn the camera on.
camera off.
The LCD monitor
darkens after
taking a picture.
Focusing
140
Camera has
difficulty in
focusing on the
subject.
Page
The Memory Card or internal memory is
full.
You took pictures with flash.
The LCD monitor may darken for charging
flash. Wait a short time.
102,
110
14, 16
21,
110
62
You took a close-up shot without selecting Select Macro mode.
Macro mode.
59
You photographed scenery with Macro
mode selected.
Cancel Macro mode.
59
You are shooting a subject that is not
suited to autofocusing (➝p.35).
Use AF/AE lock to take the picture.
The Shooting mode is set to
,
,
, or
.
, ,, .,
Intelligent Face
Detection
Cannot set
Intelligent Face
Detection.
Macro (Close-up)
shooting
Cannot set Macro The Shooting mode is set to H, ,, .,
(Close-up).
/,
,
,
,
,
or
.
34
Change the Shooting mode.
53
Change the Shooting mode.
53
Matters
Problems
Possible causes
Solutions
Page
The shutter button was pressed while the Wait until the charging is completed before
flash was charging.
pressing the shutter button.
The Shooting mode is set to
, or .
Cannot use the
flash.
Flash
, ,,
Charge the battery or load fully charged
battery.
Continuous shooting is selected.
Set continuous shooting to OFF.
70
The flash mode is set to C.
Set the flash mode to something other
than C.
61
Release Silent mode.
27
The Shooting mode is set to [AUTO],
The flash settings
, ,, ., /,
, ,
, ,
,
are restricted and
, , or
.
cannot be
selected.
Silent mode is set.
The image is
blurred.
Photographed images
53
The battery has run out.
Silent mode is set.
The playback
image is dark
even though the
flash was used.
, Change the Shooting mode.
62
, The flash settings are restricted because
, the camera settings are tailored to the
scene being shot. Change the Shooting
mode for a wider range of flash settings.
14, 16
53
Release Silent mode.
27
The subject is too far away.
Move to within the effective flash range
before taking the picture.
148
Your finger was covering the flash.
Hold the camera correctly.
29
The lens is dirty.
Clean the lens.
AF frame (lit red) and { appeared when Check the focus on the subject and take
taking pictures.
pictures.
appeared when taking pictures.
The picture was taken with a slow shutter This is a characteristic of CCDs and does
There is speckling
speed (long exposure) in a highnot indicate a camera fault.
on the image.
temperature environment.
31,
133
–
Troubleshooting
It may cause camera shake. Hold the
camera steadily.
30,
133
Continued Q
141
Troubleshooting
Z Shooting
Matters
Problems
Solutions
Page
AC power adapter was connected or
disconnected during turning the camera
on.
Connect or disconnect the AC power
adapter and DC coupler only when the
camera is off. Failing to turn the camera off
first can result in damage to the Memory
Card or malfunctions during PC
connection.
–
Continuous
shooting
Only 1 frame can A picture is taken using self-timer when
be shot even
setting [FINAL 3] or [LONG PERIOD]
though continuous continuous shooting mode.
shooting mode
was set.
Only 1 frame can be shot when using
[FINAL 3] or [LONG PERIOD] continuous
shooting mode and Self-timer mode
together.
Sound
No sound from the Silent mode is set.
camera.
Release Silent mode.
Folder
No photographed
images in the
camera.
Move or copy images to your selected
folder using [MOVE/COPY].
Photographed
Recording images images or movies
are not recorded.
142
Possible causes
You may have selected another folder
from your selected folder.
70
27
47
Z Playing back
Matters
Playing back
images
Problems
Possible causes
Erasing
Frame No.
Page
Use Micro thumbnails playback.
Photographed
You may not have selected a folder to
images cannot be save before shooting.
found.
Search with Micro thumbnails playback.
The camera volume is set too low.
Playing back
movie / voice
memo
Solutions
It takes time to
You may have saved many images.
play back images.
42
Adjust the volume.
108
The camera does The microphone was blocked during
not emit any
shooting/recording.
sound.
There is something covering the speaker
during playback.
Take care not to block the microphone
during shooting/recording.
Erasing [FRAME] Some frames may be protected.
does not erase the
frame.
Unprotect frames using the camera on
which the protection was first applied.
Make sure that the speaker is uncovered.
90, 99
91,
101
88
Erasing [ALL
FRAMES] does
not erase all the
frames.
[CONT.] in the
frame number
setting does not
function.
42
You opened the battery cover without
Always turn the camera off when replacing
turning the camera off when replacing the the battery or Memory Card. Opening the
battery or Memory Card.
battery cover without turning the camera
off may cause the frame number memory
to not function.
21
Troubleshooting
Continued Q
143
Troubleshooting
Z Connecting
Matters
Problems
Possible causes
The camera is not connected to the TV
correctly.
Connecting to TV
The included A/V cable was connected
There is no image during movie playback.
or sound on the
“TV” is selected as the TV input.
TV.
The video output setting is incorrect.
The TV image is
black and white.
PC does not
Connecting to PC recognize the
camera.
Connecting to
printer
144
Cannot print with
PictBridge.
Solutions
Connect the camera and TV correctly.
After the movie playback mode is stopped,
connect the camera and TV correctly.
Set the TV input to “VIDEO”.
Change the setting to [NTSC] or [PAL].
The TV volume is turned down.
Adjust the volume.
The video output setting is incorrect.
Change the setting to [NTSC] or [PAL].
The USB cable is not correctly connected Set up the camera, and connect the USB
to the PC or camera.
cable correctly.
• The USB cable is not correctly
connected to the printer or camera.
• The printer is not turned on.
• Set up the camera, and connect the USB
cable correctly.
• Turn the printer on.
Page
113
101,
113
–
102,
104
–
102,
104
123
114
Z Others
Matters
Problems
Possible causes
Camera malfunction may be caused
temporarily.
Nothing happens
when pressing the
buttons on the
camera.
The battery has run out.
Camera operation
etc.
The camera no
longer works
correctly.
Camera malfunction may be caused
temporarily.
Solutions
Page
Briefly remove the battery or disconnect
the AC power adapter, DC coupler. Then
reload the battery or reconnect the AC
power adapter and DC coupler, try again.
16
Charge the battery or load fully charged
battery.
14, 16
Briefly remove the battery or disconnect
the AC power adapter and DC coupler.
Then reload the battery or reconnect the
AC power adapter and DC coupler, try
again. If you think the camera is faulty,
contact your FUJIFILM dealer.
16
Troubleshooting
145
Specifications
System
Model
Digital camera FinePix Z200fd
Effective pixels
10 million pixels
CCD
1/2.3-inch CCD
Storage media
Internal memory (approx. 52 MB)/xD-Picture Card (16/32/64/128/256/512 MB/1 GB/2 GB)/SD/SDHC
Memory Card (FUJIFILM recommendation (➝p.18))
File format
Still image: DCF-compliant
Compressed: Exif ver.2.2 JPEG, DPOF-compatible
*Design rule for Camera File System compliant DPOF compatible
Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound
Number of recorded pixels Still image: 3648 × 2736 pixels/3648 × 2432 pixels/2592 × 1944 pixels/2048 × 1536 pixels/
1600 × 1200 pixels/640 × 480 pixels (
/
/
/
/
/
)
146
File size
See the table on the p.151
Lens
Fujinon 5× optical zoom lens
F3.8 (Wide-angle) - F4.8 (Telephoto)
Focal length
f=5.9 mm-29.5 mm
(Equivalent to approx. 33 mm-165 mm on a 35 mm camera)
Digital zoom
Approx. 5.7× (5× optical zoom lens is used together: Max. zoom scale: approx. 28.5×)
Aperture
F3.8/F6.4 (Wide-angle) / F4.8/F8.0 (Telephoto)
Focal range
(from lens surface)
Normal: wide-angle: approx. 60 cm (2.0 ft.) to infinity
telephoto: approx. 1 m (3.3 ft.) to infinity
Macro: wide-angle: approx. 9 cm (3.5 in.) to 80 cm (2.6 ft.)
telephoto: approx. 30 cm (1.0 ft.) to 80 cm (2.6 ft.)
System
Sensitivity
[AUTO]/Equivalent to ISO [64]/[100]/[200]/[400]/[800]/[1600] (normal output sensitivity)
Photometry
TTL 256-zones metering
Exposure control
Program AE
Scene position
([NATURAL & d]),
([NATURAL LIGHT]),
([AUCTION MODE]), H ([PORTRAIT]),
, ([LANDSCAPE]), . ([SPORT]), / ([NIGHT]),
([FIREWORKS]),
([SUNSET]),
([SNOW]),
([BEACH]),
([UNDERWATER]),
([MUSEUM]),
([PARTY]),
([FLOWER]),
([TEXT])
Dual Image Stabilizer
Available (CCD Shift)
Intelligent Face Detection
Available
Exposure compensation
–2 EV to +2 EV in 1/3 EV-step increments (
Shutter speed
AUTO,
,
, , H, ,, .,
/: 3 sec. to 1/500 sec.
: 4 sec. to 1/2 sec.
*depend on exposure mode
Continuous shooting
,
,
s)
,
,
,
,
,
, s: 1/4 sec. to 1/1000 sec.*
Top-3:
Number of recorded frames: up to 3 frames
(Max. approx. 0.6 frames/sec.)
Number of recorded frames:
Last 3 frames before releasing the shutter button
(Max. approx. 0.6 frames/sec.)
Long-period: Number of recorded frames: Depend on memory size.
(Max. approx. 0.3 frames/sec.)
Final-3:
Focus
Mode: Single-AF
AF system: TTL contrast-type
AF frame selection: AF ([CENTER]), AF ([MULTI])
Continued Q
147
Specifications
System
White balance
Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight), Fluorescent (Warm White),
Fluorescent (Cool White), Incandescent)
Self-timer
Couple timer/ Group timer/Approx. 2 sec./10 sec.
Flash type
Auto flash
Effective range: (S: [AUTO]) Wide-angle: approx. 70 cm-3.6 m (2.3 ft.-12.8 ft.)
Telephoto: approx. 70 cm-2.9 m (2.3 ft.-9.5 ft.)
Macro: approx. 30 cm-80 cm (1.0 ft.-2.6 ft.)
Flash mode
Auto, Red-eye Reduction, Forced Flash, Suppressed Flash, Slow Synchro, Red-eye Reduction + Slow Synchro
LCD monitor
2.7 inches, Aspect ratio: 4:3; 230,000 dots Amorphous silicon TFT, Approx. 97% coverage
Movie
(640 × 480) pixels/(320 × 240) pixels (%/$)
(30 frames per second with monaural sound)
Images can be recorded depending on the available space on a Memory Card or internal memory. Zoom
cannot be used during movie recording.
Photography functions
Intelligent Face Detection, Intelligent Face Detection (red-eye removal), High-speed shooting, Best
framing, Frame NO. memory
Playback functions
Intelligent Face Detection, Micro thumbnail, Trimming for blog, Trimming, Slide show, Sorting by date,
Image rotate, Voice memo, IR communication
IR communication function Supported standard: IrSimpleTM, IrSSTM/FIR
Supported communication device: IrSimpleTM, IrSSTM supported device, and Pivi
Other functions
PictBridge, Exif print, Language (
, English, Francais, Deutsch, Español, Italiano,
,
,
,
, Português, Nederlands,
,
, Magyar, Polski, Svenska), Silent mode, Folder
function, xD/SD dual slot, Time difference
Input/Output Terminal
148
A/V OUT (Audio/Visual
output)
NTSC/PAL-type (with monaural sound)
Digital input/output
USB 2.0 High-Speed, PTP (Picture Transfer Protocol) /MTP (Media Transfer Protocol)
Power Supply and Others
Power supply
Guide to the number of
available frames for battery
operation
Rechargeable Battery NP-45, DC coupler CP-45 (sold separately), AC power adapter AC-5VX (sold
separately)
Battery Type
NP-45 (750 mAh)
Number of frames
Approx. 170 frames
According to the CIPA (Camera & Imaging Products Association) standard procedure for measuring
digital still camera battery consumption (extract):
When using a battery, use the battery supplied with the camera. The storage media should be xD-Picture
Card.
Pictures should be taken at a temperature of +23°C (+73°F), with the LCD monitor turned on, the optical
zoom moved from full wide-angle to full telephoto (or vice-versa) and back again to its original position
every 30 seconds, the flash used at full power every second shot and the camera turned off and then on
again once every 10 shots.
• Note: Because the number of available shots varies depending on the level of charge in the battery, the
figures shown here for the number of available shots using the battery is not guaranteed.
The number of available shots will also decline at low temperatures.
Camera dimensions (W/H/D) 92 mm × 55.7 mm × 20.0 mm/3.6 in. × 2.2 in. × 0.8 in. (not including accessories and attachments)
Camera mass (weight)
Approx. 134 g/4.7 oz. (not including accessories, battery and Memory Card)
Weight for photography
Approx. 150 g/5.3 oz. (including battery and Memory Card)
Operating Conditions
Temperature: 0°C to +40°C (+32°F to +104°F)
80% humidity or less (no condensation)
Continued Q
149
Specifications
Notes on Using the Battery Charger
Battery NP-45
Nominal voltage
DC 3.7V
Nominal capacity
740 mAh
Operating temperature 0°C to +40°C (+32°F to +104°F)
Dimensions
31 mm × 39.4 mm × 5.7 mm(1.2 in. ×
1.6 in. × 0.2 in.)(W × H × D)
Mass (Weight)
Approx. 15 g (1.0 oz.)
Battery Charger BC-45
Rated input
100-240 V AC, 50/60 Hz
Input capacity
9.0 VA
Rated output
4.2 V DC, 550 mA
Applicable batteries
Rechargeable Battery NP-45
Charging time
Approx. 180 minutes
Dimensions
91 mm × 46 mm × 21 mm(3.6 in. ×
1.8 in. × 0.8 in.) (L × W × D)
Mass (Weight)
Approx. 55 g (1.9 oz.) (excluding
batteries)
Operating
temperatures
150
0°C to + 40°C(+ 32°F to + 104°F)
• The battery and battery charger themselves will
become warm due to the power stored inside them. This
is normal and does not indicate a fault. Wherever
possible, use the battery charger in a well-ventilated
location.
• There may be vibration noises from inside the battery
charger during use. This is normal and does not indicate
a fault.
• Do not use the battery charger to charge batteries other
than rechargeable battery NP-45.
• The battery charger could cause interference if placed
close to a radio during charging. In this event, move the
radio and charger further apart.
• Do not leave the battery charger in the following types
of locations:
• Extremely humidity or high temperatures, such as
close to a heating appliance or in direct sunlight
• Places with strong vibration
• In very dusty places
• The battery charger accepts input voltages of 100-240
V AC at 50 or 60 Hz and can be used all over the world.
However, the shape of the plug and socket-outlet
depends on the country of use. Consult your travel
agent for details.
• Do not use the connecting cable for the battery charger
with any other device.
Z Standard number of available frames/recording time per xD-Picture Card , SD Memory Card and internal memory
The number of available frames and recording time is approximate. The actual number of frames and recording time varies
depending on the type of Memory Card or shooting conditions. Also, the number of frames and recording time displayed in the
LCD monitor may not decrease regularly.
Quality setting
Number of
recorded pixels
F
3
N
3648 × 2736
%
(30 fps)
$
(30 fps)
3648 ×
2432
2592 ×
1944
2048 ×
1536
1600 ×
1200
640 × 480
640 × 480
320 × 240
4.9 MB
2.5 MB
2.2 MB
1.2MB
783KB
630 KB
130 KB
–
–
Internal memory
(approx.52 MB)
10
21
24
41
65
81
333
58 sec.
92 sec.
221 sec.
SD
xD-Picture Card Memory Card
Image data size
SDHC
Memory Card
128 MB
25
51
57
99
156
194
799
140 sec.
256 MB
51
103
115
199
313
389
1598
280 sec.
7.4 min.
512 MB
103
206
231
399
626
779
3195
9.3 min.
14.8 min.
1 GB
207
412
463
799
1254
1560
6396
18.7 min.
29.6 min.
2 GB
415
820
927
1599
2460
3046
12795
36.8 min.
59.2 min.
512 MB
100
199
224
386
606
754
3094
9.0 min.
14.3 min.
1 GB
201
399
449
774
1215
1511
6196
18.1 min.
28.7 min.
2 GB
402
795
898
1550
2385
2953
12402
35.6 min.
57.4 min.
4GB
805
1591
1798
3102
4773
5909
24820
71.3 min.* 114.9 min.*
8GB
1617
3192
3609
6225
9578
11858
49806
143.0 min.* 230.5 min.*
* A movie recording will stop automatically when a movie file becomes approx. 2GB. If you want to continue recording, press
the shutter button again. The available recording time is displayed based on approx. 2GB.
151
Specifications
If you shoot using the xD-Picture Cards with model numbers containing “M” such as DPC-M2GB, movie recording time may be
reduced if you repeatedly record and erase (frame erase) image files. In such a case, erase all frames or format the xD-Picture Card
before use. Back up important frames (files) onto your PC or another media.
* These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this manual.
* The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright
points and anomalous colors (particularly around text) may appear on the monitor. These are normal display characteristics
and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image.
* The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static electricity,
line noise, etc.).
* Due to the nature of the lens, the edges of images may appear distorted. This is normal.
152
Explanation of Terms
EV
A number denotes Exposure Value. The EV is determined by the brightness of the subject and sensitivity (speed) of the film
or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes, a
digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter speed.
When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the EV decreases
by 1.
Frame rate (fps)
The frame rate refers to the number of images (frames) that are photographed or played back per second. For example, when
10 frames are continuously photographed in a 1-second interval, the frame rate is expressed as 10 fps.
For reference, TV images are displayed at 30 fps (NTSC).
JPEG
Joint Photographic Experts Group
A file format used for compressing and saving color images. The higher the compression rate, the greater the loss of quality in
the decompressed (restored) image.
Motion JPEG
A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file are recorded
in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later.
Smear
A phenomenon specific to CCDs whereby white streaks appear on the image when there is a very strong light source, such as
the sun or reflected sunlight, in the photography screen.
WAVE
A standard format used on Windows systems for saving audio data. WAVE files have the “.WAV” file extension and the data
can be saved in either compressed or uncompressed format. Uncompressed recording is used on this camera.
WAVE files can be played back on a personal computer using the following software:
Windows: MediaPlayer
Macintosh: QuickTime Player (QuickTime 3.0 or later)
White Balance
Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, devices
such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of the ambient light
around the subject. This adjustment is called matching the white balance.
Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.
153
FUJIFILM Digital Camera Worldwide Network
If you have technical questions or if you need repair service, ask the following local distributor.
Please present the warranty card and your purchase receipt when you ask for repairs. Refer to the warranty card for conditions of the warranty.
There is a case that repair and Technical support cannot be accepted for some models which your local distributor does not deal with.
These lists are subject to change without notice.
NORTH AMERICA
Canada
U.S.A.
FUJIFILM Canada Inc.
Technical support
Repair service
FUJIFILM U.S.A., Inc.
Technical support
Repair service
CENTRAL & SOUTH AMERICA
Argentina
Imagen e informacion S.A.
Technical support &
Repair service
Bolivia
Reifschneider Bolivia Ltda.
Technical support &
Repair service
Brazil
FUJIFILM do Brasil Ltda.
Technical support &
Repair service
Chile
Reifschneider SA
Technical support &
Repair service
Colombia
Animex de Colombia Ltda.
Technical support &
Repair service
Ecuador
Espacri Cia Ltda
Technical support &
Repair service
154
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-866-818-FUJI (3854) http://www.fujihelp.ca
600 Suffolk Court Mississauga Ontario, L5R 4G4
TEL 1-800-263-5018 FAX 1-905-755-2993 http://www.fujihelp.ca
1100 King George Post Rd., Edison, NJ 08837
TEL 800-800-3854 FAX 732-857-3487 digitalinfo@fujifilm.com
1100 King George Post Rd., Edison, NJ 08837
TEL 732-857-3000 FAX 732-857-3471 njcamerarepair@fujifilm.com
Fondo de la Legua 936 San Isidro Pcia. de Buenos Aires
TEL +54-11-4836-1000 FAX +54-11-4836-1144
servtec@imageneinformacion.com.ar
Calle H N.° 5 - Equipetrol Norte - Santa Cruz
TEL +591 33 44 1129 FAX +591 33 45 2919 gciagral@bibosi.scz.entelnet.bo
Av. Vereador José Diniz, 3400 - Campo Belo, Sào Paulo/SP
TEL 0800-12-8600 FAX +55 11 5091-4150 camarasdigitais@fujifilm.com.br
Av. El Conquistador del Monte 5024, Huechuraba, Santiago, Chile
TEL 02-4431500 FAX 02-4431596 ceciliacalvo@reifschneider.cl
Calle 44 N.° 13-43 Piso 2 Apartado 18001 - Bogotá
TEL +57 1 338-0299 FAX +57 1 288-2208 animex@etb.net.co
Bolivar 5-69 y Hermano Miguel
TEL 593-72-835526 FAX 593-72-833157
Ecuador
Importaciones Espacri Cia. Ltda.
Technical support &
Repair service
Simón Bolivar 5-69 y Hno. Miguel - Cuenca
TEL +593 783 5526 FAX +593 783 3157 portiz@fujifilm.com.ec
Mexico
Fujifilm de Mexico, S.A. de C.V.
Technical support
Repair service
Av. Ejercito Nacional 351, Col. Granada 11520 Mexico, D.F.
TEL (52-55) 5263-5566 / 68 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Av. Presidente Juarez 2007, Col. Tepetlacalco, 54090 Tlalnepantla, Edo. de
Mexico
TEL (52-55) 5263-5500 FAX (52-55) 5254-1508 jlgiraud1@fujifilm.com.mx
Edificio Unitas 15 de Agosto 1035, Asunción
TEL +595 21 444256 FAX +595 21 444651 jmarbulo@fujifilm.com.py
Paraguay
Errece S.R.L.
Technical support &
Repair service
Peru
Procesos de Color S.A.
Technical support &
Repair service
Pablo Bermudez 111 Apartado 3794 - Esq. Arequipa - Lima 11
TEL +51 14 33 5563 FAX +51 14 33 7177 jalvarado@fujifilm.com.pe
Uruguay
Fotocamara S.R.L.
Technical support &
Repair service
Cuareim 1439, montevideo, Uruguay
TEL +598-2-9002004 FAX +598-2-9008430 fotocam@adinet.com.uy
Uruguay
Kiel S.A.
Technical support &
Repair service
Maldonado 1787 Montevideo- Uruguay
TEL (05982) 419 4542 FAX (05982) 412 0046 kiel@fujifilm.com.uy
Venezuela
C. Hellmund & Cia Sa
Technical support &
Repair service
Av. Ppal Diego Cisneros Caracas Venezuela Edf Oficentro
TEL 0212-2022300 FAX 0212-2399796 hellmund@hellmund.com
Fuji Film Oesterreich
Technical support &
Repair service
Traviatagasse/Pfarrgasse, 1230 Vienna, Austria
TEL 0043 1 6162606/51 or 52 FAX 0043 1 6162606/58
kamera.service@fujifilm.at
Belgium
Belgian Fuji Agency
Technical support &
Repair service
20, Avenue Lavoisier, Wavre, 1300, Belgium
TEL 3210242090 FAX 3210238562 info@fuji.be
Croatia
I&I d.o.o.
Technical support
Repair service
Hondlova 2, Zagreb, Croatia
TEL 38512319060 FAX 2310240 dsaravanja@fujifilm.hr
EUROPE
Austria
Cyprus
PMS IMAGING LTD
Technical support &
Repair service
Hondlova 2, Zagreb, Croatia
TEL 38512316228 FAX 2310240 info@fujifilm.hr
11, Dighenis Akritas Avenue, P.O.BOX 22315, 1586 Nicosia
TEL 35722746746 FAX 35722438209 mariosashiotis@fujifilm.com.cy
155
FUJIFILM Digital Camera Worldwide Network
Cyprus
Doros Neophytou
CAMERA REPAIRS
Technical support &
Repair service
28B, Agiou Demetriou, Acropoli, Nicosia
TEL 35722314719 FAX 35722515562 dorosn@logosnet.cy.net
Czech Republic
Fujifilm Cz., s.r.o.
Technical support
U nakladoveho nadrazi 2/1949, 130 00 Praha 3
TEL 00420 234 703 411 FAX 00420 234 703 489 fricman@fujifilm.cz
Czech Republic
AWH servis
Repair service
Milesovska 1, 130 00 Praha 3, Czech republic
TEL 00420 222 721 525 FAX 00420 222 720 122 awh@awh.cz
Denmark
Fujifilm Danmark A/S
Technical support &
Repair service
Stubbeled 2, 2950 Vedbæk Denmark
TEL 0045 45662244 FAX 0045 45662214 fujifilm@fujifilm.dk
Finland
Fuji Finland Oy
Technical support &
Repair service
Martinkyläntie 41, 01720 Vantaa, Finland
TEL +358 9 825951 FAX +358 9 870 3818 fuji@fuji.fi
France
FUJIFILM France
Technical support &
Repair service
9 rue d’Alembert BAT A1 ZA Pissaloup 78190 Trappes, France
FAX 33 1 01 30 58 58 65 direction.technique@pm2s.fr
Germany
FUJIFILM Electronic Imaging
Europe GmbH
Technical support &
Repair service
Benzstrasse 2, 47533 Kleve, Germany
International call TEL +49 211 50890 FAX +49 211 5089668 service@fujifilm.de
National call* TEL 0180 5898980 FAX 0180 5898982
*12 Cent/Min aus dem deutschen Festnetz
Greece
FUJIFILM HELLAS S.A.
Technical support &
Repair service
1, Ihous & Ag. Anargiron str., 175 64 P.Phaliro, Athens, Greece
TEL 0030 210 9404100 FAX 0030 210 9404397 fujifilm@fujifilm.gr
Hungary
Foto-Paradicsom Kft.
Technical support & Repair service
Technical support
Nagy Lajos király útja 20. Budapest, 1148, Hungary
TEL 3613633777 FAX 3612234250
Iceland
Icephoto (Ljosmyndavorur)
Technical support &
Repair service
Italy
FujiFilm Italia S.p.A.
Technical support
Repair service
Lithuania
156
Fujifilm Lithuania
Technical support &
Repair service
Vaci ut 19. Budapest, 1134, Hungary
TEL 3612389410 FAX 3612389401 fujifilm@fujifilm.hu
Skipholt 31, 105 Reykjavik, Iceland
TEL 354 568 0450 FAX 354 568 0455 framkollun@fujifilm.is
Via Dell’Unione Europea, 4 - 20097 San Donato Milanese (MI), Italy
TEL 039-02895821 FAX 039-0289582912 info@fujifilm.it
Fujifilm On Line - Call center
TEL 039-026695272 info@fujifilm.it
Gerosios Vilties str. 38, LT-03143 Vilnius, Lithuania
TEL 370-5-2130121 FAX 3705-5-2134066 info@fujifilm.lt
Malta
Ciancio (1913) Co.Ltd.
Technical support &
Repair service
Fuji Tech Centre, Ciancio House, Cannon Road, Qormi, QRM05
TEL 0356-21-480500 FAX 0356-21-488328 info@fujifilm.com.mt
Norway
Fujifilm Norge AS
Technical support
Lilleakerveien 10, 0283 Oslo, Norway
TEL 0047-02273 FAX 0047-22736020 http://www.fujifilm.no/
mailto:post@fujifilm.no
Liaveien 1, 5132 Nyborg, Norway
TEL 0047-55393880 FAX 0047-55195201 http://www.camera.no/
mailto:service@camera.no
Poland Al..Jerozolimskie 178; 02-486 Warszawa
TEL +48-22-517-66-00 FAX +48-22-517-66-02 fujifilm@fujifilm.pl
Repair service
Poland
Portugal
Fujifilm Polska Distribution Sp. z
o.o.
Technical support
Repair service
Fujifilm Portugal, Lda
Technical support
Repair service
Romania
CTS-Cardinal Top Systems Ltd
Technical support &
Repair service
Russia
ZAO “Fujifilm RU”
Technical support
Repair service
Slovakia
Spain
Sweden
Fujifilm Slovakia
Technical support
Repair service
Fujifilm España S.A.
Technical support
Repair service
Fujifilm Sverige AB
Technical support
Repair service
Poland, Muszkieterow 15, 02-273 Warszawa
TEL +48-22-886-94-40 FAX +48-22-886-94-42 serwis@fujifilm.pl
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 226194213 finepix@fujifilm.pt
Av. Fontes Pereira de Melo, 342, 4100-259 Porto, Portugal
TEL (351) 226194200 FAX (351) 225194662 cameras@fujifilm.pt
112, Calea Dorobanti street, 4 flat, 1sector, Bucharest, Romania
TEL 4021-230-09-82 FAX 4021-230-09-82 cts_tirla@hotmail.com
Bld. 1, 10, Rozanova str., Moscow, 123007, Russia
TEL +7-495-956-98-58 FAX +7-495-230-62-17 info@fujifilm.ru
http://www.fujifilm.ru
TEL +7-495-956-98-58
Pribylinska 2, 831 04 Bratislava, Slovakia
TEL 00421 2 44 888 077 FAX 00421 2 44 889 300 fujifilm@fujifilm.sk
FIS Tatracentrum, Hodzovo nam. 4 - Tatracentrum, 811 06 Bratislava, Slovakia
TEL 00421 2 54 647 347 fis.tatracentrum@stonline.sk
Aragón 180, 08011 Barcelona (España)
TEL 902012535 FAX 934515900 / 933230330 info@fujifilm.es
Aragón 180, 08011 Barcelona (España)
TEL 934511515 FAX 934515900 / 933230330 tallersat@fujifilm.es
Sveavägen 167 104 35 Stockholm
TEL 46 8 506 141 70 FAX 46 8 506 142 09 kamera@fujifilm.se
Sveavägen 167 104 35 Stockholm
TEL 46 8 506 513 54 FAX 46 8 506 513 99 kameraverkstaden@fujifilm.se
157
FUJIFILM Digital Camera Worldwide Network
Switzerland /
Lichtenstein
Fujifilm (Switzerland) AG
Technical support &
Repair service
Niederhaslistrasse 12, 8157 Dietlikon, Switzerland
TEL +41 44 855 5154 FAX +41 44 855 5329 RepairCenter@fujifilm.ch
The Netherlands
FUJIFILM Electronic Imaging
Nederland
Technical support
Repair service
Hoogstraat 35, 3011 PE Rotterdam, Nederlands
TEL +31(0)102812500 FAX +31(0)102812560 helpdesk@fujifilm-digital.nl
Turkey
U.K.
Ukraine
MIDDLE EAST
Iran
Israel
158
Fujifilm Turkiye Sinfo A.S.
Technical support
Repair service
FUJIFILM UK Ltd.
Technical support
Repair service
Image Ukraine CJSC
Technical support &
Repair service
Hoogstraat 35, 3011 PE Rotterdam, Nederlands
TEL +31(0)102812520 FAX +31(0)102812550 camerareparaties@fujifilm-digital.nl
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5009 csarp@fujifilm.com.tr
Fujifilm Plaza, Dereboyu Cad. 39 34660 Halkali, Istanbul, Turkey
TEL +90 212 696 5090 FAX +90 212 696 5010 servis@fujifilm.com.tr
St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 424 5383 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
St Martins Way St Martins Business Centre Bedford MK42 0LF
TEL +44 (0)123 421 8388 FAX +44 (0)123 424 5285 fujitec@fuji.co.uk
12, Kontraktova ploshcha, Kyiv 04070, Ukraine
TEL +380-44-4909075 FAX +380-44-4909076 d@fujifilm.ua
Tehran Fuka Co.
Technical support &
Repair service
229,“Fuji” Bldg., Mirdamad Blvd., Tehran 19189, Iran
TEL (+98-21)2254810-19 FAX (+98-21)2221002 fuka@neda.net
Shimone Group Ltd.
Technical support
Repair service
Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 digital@fujifilm.co.il
Efal 33 keyriat Arie Petah Tikva 49130, Israel
TEL (+ ) 972 3 9250666 FAX 972 3 9250699 khaim@shimone.com
Al- Abdali, Amman / Jordan
TEL 009626-4646387 FAX 009626-4647542 gstores@go.com.jo
Jordan
Grand Stores
Technical support &
Repair service
Qatar
Techno Blue
Technical support
Blue Salon Bldg, 3rd Floor, Suhaim bin Hamad st, Al- Saad, Doha
TEL 00974 44 66 175 FAX 00974 44 79 053 prabu@techno-blue.com
Saudi Arabia
Emam Distribution Co. Ltd.
Technical support
P.O. Box 1716, Jeddah 21441, Saudi Arabia
TEL 96626978756 FAX 96626917036 service@fujifilm.com.sa
Syria
Film Trading Company
Technical support
Repair service
Al-Shahbandar P.O. Box:31180 Damascus SYRIA
TEL + 963 11 2218049 FAX + 963 11 44673456 f.t.c@Net.SY
Al-cheikh Taha P.O. Box: 6171 Aleppo SYRIA
TEL + 963 21 4641903 FAX + 963 21 4641907 filmtradin@Net.SY
P. O. Box 2144, Saleh Bin Lahej Building, Al Garhoud, Deira, Dubai
TEL + 971-4-2823700 FAX + 971-4-2828382 photography@grandstores.ae
U.A.E.
Grand Stores
Technical support &
Repair service
Yemen
Al-Haidary Trading
Technical support
Repair service
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503980 FAX 00967-1-503983
Foto Express Egypt
Technical support &
Repair service
426 Pyramids St., Giza, Egypt
TEL (202) 7762062 FAX (202) 7760169 fotoegypt@access.com.eg
Fuji Kenya Ltd
Repair service
P.O.Box 41669-00100, Fuji Plaza, Chiromo Road, Nairobi, Kenya.
TEL (254-20)4446265-8 FAX (254-20)4448515 / 7 info@fujifilm.co.ke
FUJIFILM Australia Pty Ltd
Technical support &
Repair service
Locked Bag 5100, Brookvale, NSW, 2100
TEL 1800 226 355 FAX +61 (2) 9466 2854 digital@fujifilm.com.au
Fiji
Brijlal & Co. Ltd
Technical support &
Repair service
70-72 Cumming Street,Suva,Fiji
TEL (679)3304133 FAX (679)3302777 kapadia@connect.com.fj
New Caledonia
Phocidis SARL
Technical support &
Repair service
58, rue Higginson - B.P.661 - 98845
TEL (00 687) 25-46-35 FAX (00 687) 28-66-70 phocidis@phocidis.nc
New Zealand
Fujifilm NZ Ltd
Technical support &
Repair service
Cnr William Pickering & Bush Road Albany, Auckland
TEL +64-9-4140400 FAX +64-9-4140410 glenn.beaumont@fujifilm.co.nz
Papua New Guinea
Oceania PNG Limited
Technical support
Section 15, Allotment 1, Reke St, Boroko NCD. PNG. Mail: PO Box 2167, Boroko
NCD. PNG. TEL +675 3256411 FAX +675 3250311 oceania@daltron.com.pg
Fuji Photo Products Co., Ltd.
Technical support &
Repair service
8/F.,TSUEN WAN IND. CENTRE, 220 TEXACO RD., TSUEN WAN, HONG KONG
TEL (852)2406 3287 FAX (852)2408 3130 rsd@chinahkphoto.com.hk
AFRICA
Egypt
Kenya
OCEANIA
Australia
ASIA
Hong Kong
P.O.Box-2942 Haddah St. HTC, Sana’a, Yemen
TEL 00967-1-503977 FAX 00967-1-503983
159
FUJIFILM Digital Camera Worldwide Network
Indonesia
PT Modern Photo Tbk
Technical support &
Repair service
Jl.Matraman Raya 12, Jakarta Timur 13150
TEL +62 021 2801000 FAX +62 021 8581620+62 021 2801012
assd_kmr@modernphoto.co.id
Malaysia
FUJIFILM (Malaysia)
Sdn. Bhd.
Technical support
Repair service
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 digital@fujifilm.com.my
Philippines
YKL Development & Trdg. Corp.
Technical support
Repair service
24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 tech_services@yklcolor.com
10 New Industrial Road Fujifilm Building Singapore 536201
TEL 65-6380 5557 FAX 65-6281 3594 service@fujifilm.com.sg
Singapore
FUJIFILM (Singapore) Pte Ltd
Technical support &
Repair service
South Korea
Korea Fujifilm Co., Ltd.
Technical support
30-1, Mukjeung-dong, Jung-gu, Seoul, Korea
TEL +82-2-3282-7363 FAX +82-2-2269-7435 photo@fujifilm.co.kr
South Korea
Yonsan AS Center (Fujidigital)
Repair service
#301, 3F, Jeonjaland, 16-9, Hangangro3-ga, Yongsan-gu, Seoul, Korea
TEL +82-2-701-1472 FAX +82-2-718-1331 1bowl@hanmail.net
South Korea
Kangnam AS Center
(Digitalgallery)
Repair service
2F, Hyeongin Tower, 23-2, Bangyi-dong, Songpa-gu, Seoul, Korea
TEL +82-2-2203-1472 FAX +82-2-418-5572 nurijili@hanmail.net
South Korea
Busan AS Center (Digital-Sewon) 241-4, Bujeon-dong, Busanjin-gu, Busan, Korea
TEL +82-51-806-1472 FAX +82-51-817-0083 merahan@yahoo.co.kr
Repair service
No. 38, Min-Chuan E. Rd. Sec. 6, Taipei (114), Taiwan, R.O.C.
Hung Chong Corp.
TEL 886-2-6602-8988 FAX 886-2-2791-8647 dah@mail.hungchong.com.tw
Technical support &
Repair service
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
FUJIFILM (Thailand) Ltd.
TEL +662-2730029 ext. 755 FAX +662-2730239 supaleark@fujifilm.co.th
Technical support
Taiwan
Thailand
Repair service
Vietnam
160
Letter Box 1, Level 10, 11 & 12, Menara Axis, No 2, Jalan 51A/223, 46100 Petaling
Jaya, Selangor Darul Ehsan, Malaysia
TEL 603-79584700 FAX 603-79584110 technical@fujifilm.com.my
24 Sto. Domingo St., Quezon City 1100, Philippines
TEL 632-7436601~06 FAX 632-7324661 digital@yklcolor.com
International Minh Viet Co., Ltd.
Technical support &
Repair service
388 SP Building, 8th Floor, Phayathai, Bangkok 10400
TEL +662-2730029 ext.761,762 FAX +662-2730239 warin@fujifilm.co.th
99-107 Bach Van street, Ward 5, District 5, Ho chi minh city
TEL +84-8-8366807 ext.122 FAX +84-8-8380621 diep.phanthithanh@imv.com.vn
Memo
161
Memo
162
Memo
163
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Notes and Cautions
IMPORTANT SAFETY INSTRUCTIONS
Read Instructions:
All the safety and operating instructions should
be read before the appliance is operated.
Retain Instructions:
The safety and operating instructions should be
retained for future reference.
Heed Warnings:
All warnings on the appliance and in the
operating instructions should be adhered to.
Follow Instructions:
All operating and use instructions should be
followed.
Installation
Power Sources—This video product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your appliance dealer or local power
company. For video products intended to
operate from battery power, or other sources,
refer to the operating instructions.
Grounding or Polarization—This video
product is equipped with a polarized
alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Alternate Warnings—This video product is
equipped with a 3-wire grounding-type plug, a
plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet.
This is a safety feature. If you are unable to
insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the groundingtype plug.
Overloading—Do not overload wall outlets and
extension cords as this can result in a risk of fire
or electric shock.
Ventilation—Slots and openings in the cabinet
are provided for ventilation and to ensure
reliable operation of the video product and to
protect it from overheating, and these openings
must not be blocked or covered.
The openings should never be blocked by
placing the video product on a bed, sofa, rug,
or other similar surface.
This video product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been adhered
to.
This video product should never be placed near
or over a radiator or heat register.
Attachments—Do not use attachments not
recommended by the video product
manufacturer as they may cause hazards.
Water and Moisture—Do not use this video
product near water – for example, near a bath
tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, and
the like.
Power-Cord Protection—Power-Supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to
cords at plugs, convenience receptacles, and
the point where they exit from the appliance.
Accessories—Do not place this video product
on an unstable cart, stand, tripod, bracket, or
table. The video product may fall, causing
serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart,
stand, tripod, bracket, or table recommended
by the manufacturer, or sold with the video
product. Any mounting of the appliance should
follow the manufacturer’s instructions, and
should use a mounting accessory
recommended by the manufacturer.
An appliance and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
Antennas
Outdoor Antenna Grounding—If an outside
antenna or cable system is connected to the
video product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70, provides
information with respect to proper grounding of
the mast and supporting structure, grounding of
the lead-in wire to an antennadischarge unit,
size of grounding conductors, location of
antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
Power Lines—An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep
from touching such power lines or circuits as
contact with them might be fatal.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Ground
Clamp
Electric
Service
Equipment
Antenna
Lead in
Wire
Antenna
Discharge Unit
(NEC SECTION 810-20)
Grounding Conductors
(NEC SECTION 810-21)
Ground Clamps
Power Service Grounding
Electrode System
(NEC ART 250. PART H)
Use
Cleaning—Unplug this video product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
Object and Liquid Entry—Never push objects
of any kind into this video product through
openings as they may touch dangerous voltage
points or shortout parts that could result in a fire
or electric shock. Never spill liquid of any kind
on the video product.
Lightning—For added protection for this video
product receiver during a lightning storm, or
when it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power-line surges.
Service
Servicing—Do not attempt to service this video
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
Damage Requiring Service—Unplug this
video product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
When the power-supply cord or plug is
damaged.
If liquid has been spilled, or objects have fallen
into the video product.
If the video product has been exposed to rain or
water.
If the video product has been dropped or the
cabinet has been damaged.
If the video product does not operate normally
be following the operating instructions. Adjust
only those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work by
a qualified technician to restore the video
product to its normal operation.
■ Trademark Information
•
and xD-Picture Card™ are trademarks of
FUJIFILM Corporation.
• IBM PC/AT is a registered trademark of
International Business Machines Corp. of the
U.S.A.
• Macintosh, Power Macintosh, iMac, PowerBook,
iBook and Mac OS are trademarks of Apple Inc.,
registered in the U.S. and other countries.
• Microsoft, Windows, the Windows logo,
Windows Vista and the Windows Vista logo are
trademarks or registered trademarks of
Microsoft Corporation in the United States and/
or other countries. Windows is an abbreviated
term referring to the Microsoft® Windows®
Operating System.
* The “Designed for Microsoft® Windows® XP”
logo refers to the camera and the driver only.
Before Using the Camera
• IrSimple™ Trademark is owned by the Infrared
Data Association®.
Read the back side before using the camera.
• IrSS™ Trademark or IrSimpleShot™ Trademark
■ Test Shots Prior to Photography
is owned by the Infrared Data Association®.
For important photographs (such as weddings
• SDHC logo is a trademark.
and overseas trips), always take a test shot and
• Other company or product names are
view the image to make sure that the camera is
trademarks or registered trademarks of the
working normally.
respective companies.
• FUJIFILM Corporation cannot accept liability for
■ Notes on Electrical Interference
any incidental losses (such as the costs of
If the camera is to be used in hospitals or aircrafts,
photography or the loss of income from
please note that this camera may cause
photography) incurred as a result of faults with
interference to other equipment in the hospital or
this product.
aircraft. For details, please check with the
■ Notes on Copyright
applicable regulations.
Images recorded using your digital camera system
■ Explanation of Color Television System
cannot be used in ways that infringe copyright
NTSC: National Television System Committee,
laws without the consent of the owner, unless
color television telecasting specifications
intended only for personal use. Note that some
adopted mainly in the U.S.A., Canada and
restrictions apply to the photographing of stage
Japan.
performances, entertainments and exhibits, even
PAL: Phase Alternation by Line, a color
when intended purely for personal use. Users are
television system adopted mainly by
also asked to note that the transfer of Memory
European countries and China.
Card containing images or data protected under
copyright laws is only permissible within the
■ Exif Print (Exif ver. 2.2)
restrictions imposed by those copyright laws.
Exif Print Format is a newly revised digital camera
file format that contains a variety of shooting
■ Handling Your Digital Camera
information for optimal printing.
To ensure that images are recorded correctly, do
* See “Using Your Camera Correctly”
not subject the camera to impact or shock while
(→OWNER’S MANUAL) for more information.
an image is being recorded.
■ Liquid Crystal
If the LCD monitor is damaged, take particular
⇒ Also, read the back page.
care with the liquid crystal in the monitor. If any of
the following situations arise, take the urgent
action indicated.
• If liquid crystal comes in contact with your skin:
Wipe the area with a cloth and then wash
thoroughly with soap and running water.
• If liquid crystal gets into your eye:
Flush the affected eye with clean water for at
least 15 minutes and then seek medical
assistance.
• If liquid crystal is swallowed:
Flush your mouth thoroughly with water. Drink
large quantities of water and induce vomiting.
Then seek medical assistance.
When the video product exhibits a distinct
change in performance - this indicates a need
for service.
Replacement Parts—When replacement parts
are required, be sure the service technician has
used replacement parts specified by the
manufacturer or have the same characteristics
as the original part. Unauthorized substitutions
may result in fire, electric shock or other
hazards.
Safety Check—Upon completion of any
service or repairs to this video product, ask the
service technician to perform safety checks to
determine that the video product is in proper
operating condition.
7-3, AKASAKA 9-CHOME, MINATO-KU,
TOKYO 107-0052, JAPAN
BL00647-101 1AG6P1P3773--
http://www.fujifilm.com/products/
digital_cameras/index.html
Power Supply and Battery
Be sure to read this notes before using
Safety Notes
WARNING
• Make sure that you use your camera correctly. Read these
Safety Notes and your Owner’s Manual carefully before use.
• After reading these Safety Notes, store them in a safe place.
About the Icons
• The icons shown below are used in this document to indicate
the severity of the injury or damage that can result if the
information indicated by the icon is ignored and the product is
used incorrectly as a result.
WARNING
This icon indicates that death or
serious injury can result if the
information is ignored.
CAUTION
This icon indicates that personal
injury or material damage can result
if the information is ignored.
The icons shown below are used to indicate the nature of the
information which is to be observed.
Triangular icons tell you that this information requires
attention (“important”).
Circular icons with a diagonal bar tell you that the
action indicated is prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an
action that must be performed (“Required”).
WARNING
If a problem arises, turn the camera off, remove
the battery, disconnect and unplug the AC
power adapter.
Continued use of the camera when it is emitting
smoke, is emitting any unusual odor, or is in any
other abnormal state can cause a fire or electric
shock.
• Contact your FUJIFILM dealer.
Do not allow water or foreign objects to enter
the camera.
If water or foreign objects get inside the camera,
turn the camera off, remove the battery and
disconnect and unplug the AC power adapter.
Continued use of the camera can cause a fire or
electric shock.
• Contact your FUJIFILM dealer.
Do not use the camera in the bathroom or
shower.
This can cause a fire or electric shock.
Never attempt to change or take apart the
camera. (Never open the casing.)
Do not use the camera when it has been
dropped or the casing is damaged.
This can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
Do not change, heat or unduly twist or pull the
connection cord and do not place heavy objects
on the connection cord.
These actions could damage the cord and cause a
fire or electric shock.
• If the cord is damaged, contact your FUJIFILM
dealer.
Do not place the camera on an unstable surface.
This can cause the camera to fall or tip over and
cause injury.
Never attempt to take pictures while in motion.
Do not use the camera while you are walking or
driving a vehicle.
This can result in you falling down or being involved
in a traffic accident.
Do not touch any metal parts of the camera
during a thunderstorm.
This can cause an electric shock due to induced
current from the lightning discharge.
Do not use the battery except as specified.
Load the battery as aligned with the indicator.
Do not heat, change or take apart the battery.
Do not drop or subject the battery to impacts.
Do not store the battery with metallic products.
Do not use chargers other than the specified
model to charge the battery.
Any of these actions can cause the battery to burst
or leak and cause fire or injury as a result.
Use only the battery or AC power adapters
specified for use with this camera.
Do not use voltages other than the power supply
voltage shown.
The use of other power sources can cause a fire.
If the battery leaks and fluid gets in contact with
your eyes, skin or clothing. Flush the affected
area with clean water and seek medical attention
or call an emergency number right away.
Do not use the charger to charge batteries other
than those specified here.
The Ni-MH battery charger is designed for Fujifilm
HR-AA Ni-MH batteries. Using the charger to
charge conventional batteries or other types of
rechargeable batteries can cause the battery to
leak fluid, overheat or burst.
When carrying the battery, install it in a digital
camera or keep it in the hard case.
When storing the battery, keep it in the hard case.
When discarding, cover the battery terminals
with insulation tape.
Contact with other metallic objects or battery could
cause the battery to ignite or burst.
Keep Memory Cards out of the reach of small
children.
Because Memory Cards are small, they can be
swallowed by children. Be sure to store Memory
Cards out of the reach of small children. If a child
swallows a Memory Card, seek medical attention or
call an emergency number.
CAUTION
Unplug
from power
socket.
Do not use in
the bathroom
or shower
Do not
disassemble.
Do not use this camera in locations affected by
oil fumes, steam, humidity or dust.
This can cause a fire or electric shock.
Do not leave this camera in places subject to
extremely high temperatures.
Do not leave the camera in locations such as a
sealed vehicle or in direct sunlight.
This can cause a fire.
Keep out of the reach of small children.
This product could cause injury in the hands of a
child.
Do not place heavy objects on the camera.
This can cause the heavy object to tip over or fall
and cause injury.
Do not move the camera while the AC power
adapter is still connected.
Do not pull on the connection cord to
disconnect the AC power adapter.
This can damage the power cord or cables and
cause a fire or electric shock.
Do not use the AC power adapter when the plug is
damaged or the plug socket connection is loose.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the AC
power adapter in a cloth or blanket.
This can cause heat to build up and distort the
casing or cause a fire.
When you are cleaning the camera or you do not
plan to use the camera for an extended period,
remove the battery and disconnect and unplug
the AC power adapter.
Failure to do so can cause a fire or electric shock.
When charging ends, unplug the charger from
the power socket.
Leaving the charger plugged into the power socket
can cause a fire.
Using a flash too close to a person’s eyes may
temporarily affect the eyesight.
Take particular care when photographing infants
and young children.
When an xD-Picture Card is removed, the card
could come out of the slot too quickly. Use your
finger to hold it and gently release the card.
Request regular internal testing and cleaning
for your camera.
Build-up of dust in your camera can cause a fire or
electric shock.
• Contact your FUJIFILM dealer to request internal
cleaning every 2 years.
• Please note this is not a free of charge service.
* Confirm your battery type before reading the
following descriptions.
The following explains proper use of batteries and
how to prolong their life. Incorrect use of batteries can
cause shorter battery life, as well as leakage,
excessive heat, fire or explosion.
1 Camera uses the Rechargeable Lithium-ion
Battery
* When shipped, the battery is not fully charged.
Always charge the battery before using it.
* When carrying the battery, install it in a
digital camera or keep it in the soft case.
■ Battery Features
• The battery gradually loses its charge even when
not used. Use a battery that has been charged
recently (in the last day or two) to take pictures.
• To maximize the life of the battery, turn the camera
off as quickly as possible when it is not being used.
• The number of available frames will be lower in cold
locations or at low temperatures. Take along a spare
fully charged battery. You can also increase the
amount of power produced by putting the battery in
your pocket or another warm place to heat it and
then loading it into the camera just before you take a
picture.
If you are using a heating pad, take care not to
place the battery directly against the pad. The
camera may not operate if you use a depleted
battery in cold conditions.
■ Charging the Battery
• You can charge the battery using the battery
charger (included).
• The battery can be charged at ambient
temperatures between 0°C and +40°C (+32°F
and +104°F). Refer to the OWNER’S MANUAL for
the time of charging battery.
• You should charge the battery at an ambient
temperature between +10°C and +35°C
(+50°F and +95°F). If you charge the battery at a
temperature outside this range, charging takes
longer because the performance of the battery is
impaired.
• You cannot charge the battery at temperatures of
0°C (+32°F) or below.
• The Rechargeable Lithium-ion Battery does not
need to be fully discharged or exhausted flat before
being charged.
• The battery may feel warm after it has been charged
or immediately after being used. This is perfectly
normal.
• Do not recharge a fully charged battery.
■ Battery Life
At normal temperatures, the battery can be used at
least 300 times. If the time for which the battery
provides power shortens markedly, this indicates that
the battery has reached the end of its effective life
and should be replaced.
■ Notes on storage
• If a battery is stored for long periods while charged,
the performance of the battery can be impaired. If
the battery will not be used for some time, run the
battery out before storing it.
• If you do not intend to use the camera for a long
period of time, remove the battery from the camera.
• Store the battery in a cool place.
• The battery should be stored in a dry location with
an ambient temperature between +15°C and
+25°C (+59°F and +77°F).
• Do not leave the battery in hot or extremely cold
places.
■ Using the AA-size Ni-MH batteries correctly
■ Handling the Battery
Cautions for Your Safety:
• Ni-MH batteries left unused in storage for long
periods can become “deactivated”. Also, repeatedly
• Do not carry or store battery with metal objects such
as necklaces or hairpins.
charging Ni-MH batteries that are only partially
discharged can cause them to suffer from the
• Do not heat the battery or throw it into a fire.
“memory effect”. Ni-MH batteries that are
• Do not attempt to take apart or change the battery.
“deactivated” or affected by “memory” suffer from
• Do not recharge the battery with chargers other
those specified.
the problem of only providing power for a short time
after being charged. To prevent this problem,
• Dispose of used battery promptly.
discharge and recharge them several times using
• Do not drop the battery or otherwise subject it to
strong impacts.
the camera’s “Discharging rechargeable batteries”
function.
• Do not expose the battery to water.
Deactivation and memory are specific to Ni-MH
• Always keep the battery terminals clean.
batteries and are not in fact battery faults.
• Do not store batteries in hot places. Also, if you use
the battery for a long period, the camera body and
See OWNER’S MANUAL for the procedure for
the battery itself will become warm. This is normal.
“Discharging rechargeable batteries”.
Use the AC power adapter if you are taking pictures
Do not use the “Discharging
or viewing images for a long period of time.
CAUTION
rechargeable batteries” function when
alkaline batteries being used.
2 Camera uses AA-size alkaline or Ni-MH
• To charge Ni-MH batteries, use the quick battery
(nickelmetal hydride) rechargeable batteries
charger (sold separately). Refer to the instructions
■ Applicable Batteries
supplied with the charger to make sure that the
• In the camera, use AA-size alkaline or Ni-MH
charger is used correctly.
(nickelmetal hydride) rechargeable batteries.
• Do not use the battery charger to charge other
Do not use AA-size manganese, nickel-cadmium
batteries.
(Ni-Cd) or lithium batteries in your camera because • Note that the batteries feel warm after being
the heat created by the batteries could damage the
charged.
camera or cause it not to work.
• Due to the way the camera is constructed, a small
• The life of alkaline batteries varies between brands.
amount of current is used even when the camera is
The life of batteries you purchase may be shorter
turned off. Note in particular that leaving Ni-MH
than those provided with the camera.
batteries in the camera for a long period will
overdischarge the batteries and may render them
■ Cautions for Using Battey
unusable even after recharging.
• Do not heat the batteries or throw them into a fire.
• Ni-MH batteries will self-discharge even when not
• Do not carry or store batteries with metal objects
used, and the time for which they can be used may
such as necklaces or hairpins.
be shortened as a result.
• Do not expose the batteries to water, and keep
• Ni-MH batteries will deteriorate rapidly if
batteries from getting wet or stored in moist
overdischarged (e.g. by discharging the batteries in
locations.
a flashlight). Use the “Discharging rechargeable
• Do not attempt to take apart or change the
batteries” function provided in the camera to
batteries, including battery casings.
discharge the batteries.
• Do not subject the batteries to strong impacts.
• Ni-MH batteries have a limited service life. If a
• Do not use batteries that are leaking, deformed,
battery can only be used for a short time even after
discolored.
repeated discharge-charge cycles, it may have
• Do not store batteries in warm or humid places.
reached the end of its service life.
• Keep the batteries out of reach of babies and small
children.
■ Disposing of Batteries
• Make sure that the battery polarity (+ and ,) is
• When disposing of batteries, do so in accordance
correct.
with your local waste disposal regulations.
• Do not use new with used batteries. Do not use
3 Notes on both models ( 1 , 2 )
charged and discharged batteries together.
• Do not use different types or brands of batteries at
■ AC Power Adapter
the same time.
Always use the AC Power Adapter (sold separately)
• If you do not intend to use the camera for a long
with the camera. The use of an AC Power adapter
period of time, remove the batteries from the
other than FUJIFILM AC Power Adapter (sold
camera. Note if the camera is left with the batteries
separately) can be damaged to your digital camera.
removed, the time and date settings are cleared.
For details on the AC power adapter, refer to the
• The batteries feel warm right after being used.
OWNER’S MANUAL of your camera.
Before removing the batteries, turn the camera off
• Use the AC power adapter for indoor use only.
and wait for the batteries to cool down.
• Plug the connection cord plug securely into the DC
• Since batteries do not work well in cold weather or
input terminal.
locations, warm the batteries by placing them inside
• Turn off the FUJIFILM Digital camera before
your garments before use. Batteries do not work
disconnecting the cord from the DC input terminal.
well when cold. They will work again when the
To disconnect, pull out the plug gently. Do not pull
temperature returns to normal.
on the cord.
• Soil (such as fingerprints) on the battery terminals
•
Do not use the AC power adapter with any device
makes the batteries charge less reducing the
other than your camera.
number of images. Carefully wipe the battery
• During use, the AC power adapter will become hot
terminals with a soft dry cloth before loading.
to the touch. This is normal.
If any liquid at all leaks from the batteries, wipe • Do not take apart the AC power adapter. Doing so
the battery compartment thoroughly and then
could be dangerous.
load new batteries.
• Do not use the AC power adapter in a hot and
humid place.
If any battery fluid comes into contact with your
• Do not subject the AC power adapter to strong
hands or clothing, flush the area thoroughly
shocks.
with water. Note that battery fluid can cause
• The AC power adapter may emit a humming. This is
loss of eyesight if it gets into your eyes. If this
normal.
occurs, do not rub your eyes. Flush the fluid
• If used near a radio, the AC power adapter may
out with clean water and contact your
cause static. If this happens, move the camera
physician for treatment.
away from the radio.
Download PDF

advertising