FujiFilm Z35 Digital Camera User Manual

BL00947-200
EN
Before You Begin
First Steps
Owner’s Manual
Thank you for your purchase of this
product. This manual describes
how to use your FUJIFILM FinePix
Z35 or Z37 digital camera and the
supplied software. Be sure that
you have read and understood its
contents before using the camera.
Basic Photography and Playback
More on Photography
More on Playback
Movies
Connections
Menus
Technical Notes
For information on related products, visit our website at
http://www.fujifilm.com/products/index.html
Troubleshooting
Appendix
About This Manual
This manual is for use with the following FinePix cameras: the Z35 and Z37. All operations are
identical; save where otherwise noted, the illustrations in this manual show the Z35.
Model
FinePix Z35
FinePix Z37
Monitor
2.5-inch
2.7-inch
Before using the camera, read this Owner’s Manual and the other supplied documents. For
information on specific topics, consult the sources below.
✔ Camera Q & A ................................................... pg. iii
Know what you want to do but don’t know the
name for it? Find the answer in “Camera Q & A”.
✔ Table of Contents ..............................................
..............................................pg.
pg. vi
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.
✔ Troubleshooting ..............................................
..............................................pg.
pg. 80
Having a specific problem with the camera?
Find the answer here.
✔ Warning Messages and Displays .......................
.......................pg.
pg. 87
Find out what’s behind that flashing icon or
error message in the monitor.
✔ Glossary ..........................................................
..........................................................pg.
pg. 91
The meanings of some technical terms may be
found here.
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this
manual, SD memory cards are referred to as “memory cards”. For more information, see page 8.
ii
Camera Q & A
Find items by task.
Camera Setup
Question
How do I set the camera clock?
Can I set the clock to local time when I travel?
How do I keep the monitor from turning off automatically?
How do I make the monitor brighter or darker?
How do I stop the camera beeping and clicking?
What are the parts of the camera called?
What do the icons in the monitor mean?
How do I use the menus?
What’s behind that flashing icon or error message in the monitor?
How much charge is left in the battery?
Key phrase
Date and time
Time difference
Auto power off
LCD brightness
Silent mode
Volume
Parts of the camera
Monitor
Menus
Messages and displays
Battery level
See page
14
77
76
76
27
75
2
3
55
87
16
Sharing Pictures
Question
Can I print pictures on my home printer?
Can I copy my pictures to my computer?
Key phrase
See page
Printing pictures
43
Viewing pictures on a computer
48
iii
Camera Q & A
Taking Pictures
Question
How many pictures can I take?
Is there a quick and easy way to take snapshots?
How can I make good portraits?
Can the camera automatically select the most suitable mode?
Is there a simple way to adjust settings for different scenes?
How do I shoot close-ups?
How do I keep the flash from firing?
How do I stop my subjects’ eyes glowing red when I use the flash?
How do I “fill-in” shadows on back-lit subjects?
How do I take a group portrait that includes the photographer?
How do I frame pictures with the subject off to one side?
How do I shoot movies?
iv
Key phrase
Memory capacity
k mode
Intelligent Face Detection
G mode
Shooting mode
Macro mode (Close-ups)
See page
92
16
21
31
30
25
Flash mode
26
Self-timer mode
Focus lock
Recording movies
28
23
40
Camera Q & A
Viewing Pictures
Question
How do I view my pictures?
Is there a simple way to delete one image?
How do I delete one or all images at once?
Can I zoom in on pictures during playback?
How do I view a lot of pictures at once?
How do I view all pictures taken on the same day?
Can I protect my pictures from accidental deletion?
Can I hide the icons in the monitor when viewing my pictures?
Can I view my pictures in a slide show?
Can I add a short voice memo to my pictures?
Can I crop unwanted elements out of my pictures?
Can I copy pictures from internal memory to a memory card?
Can I process still images for posting to a blog?
How do I view my pictures on TV?
Key phrase
Single-frame playback
Deleting pictures
Erase
Playback zoom
Multi-frame playback
Sort by date
Protect
Choosing a display format
Slide show
Voice memo
Crop
Copy
Process still images
Viewing pictures on TV
See page
34
20
38
35
36
37
65
34
63
69
66
67
62
42
v
Table of Contents
About This Manual .......................................................................... ii
Camera Q & A .................................................................................... iii
Camera Setup .............................................................................. iii
Sharing Pictures .......................................................................... iii
Taking Pictures ............................................................................ iv
Viewing Pictures .......................................................................... v
Before You Begin
Introduction....................................................................................... 1
Symbols and Conventions .......................................................... 1
Supplied Accessories .................................................................... 1
Parts of the Camera ....................................................................... 2
The Monitor ................................................................................... 3
First Steps
Inserting the Battery...................................................................... 4
Charging the Battery ..................................................................... 6
Inserting a Memory Card ............................................................. 8
Turning the Camera On and Off ..............................................13
Shooting Mode .............................................................................13
Playback Mode ..............................................................................13
Basic Setup .......................................................................................14
Basic Photography and Playback
Taking Pictures in k (AUTO) Mode ......................................16
Viewing Pictures ............................................................................20
vi
More on Photography
B Intelligent Face Detection and Red-Eye Removal ...21
Focus Lock ........................................................................................23
L Macro mode (Close-ups) ......................................................25
K Using the Flash (Intelligent Flash).....................................26
J Using the Self-Timer...............................................................28
a Shooting Mode .........................................................................30
Selecting a Shooting Mode......................................................30
Shooting Modes ...........................................................................30
G SCENE RECOGNITION ........................................................31
More on Playback
Single-Frame Playback ...............................................................34
Playback Zoom..............................................................................35
Multi-Frame Playback .................................................................36
Sort by Date .....................................................................................37
A Deleting Pictures .....................................................................38
Movies
A Recording Movies ...................................................................40
D Viewing Movies .......................................................................41
Table of Contents
Connections
Viewing Pictures on TV ...............................................................42
Printing Pictures via USB ...........................................................43
Connecting the Camera ............................................................43
Printing Selected Pictures ........................................................43
Printing the DPOF Print Order ................................................44
Creating a DPOF Print Order ....................................................46
Viewing Pictures on a Computer............................................48
Installing FinePixViewer ............................................................48
Installing FinePixViewer: Windows ....................................48
Installing FinePixViewer: Macintosh ..................................51
Connecting the Camera ............................................................53
Menus
The Shooting Menu ......................................................................55
Using the Shooting Menu.........................................................55
Shooting Menu Options ............................................................56
d EXP. COMPENSATION .........................................................57
e WHITE BALANCE ..................................................................58
f IMAGE QUALITY ...................................................................58
g ISO .............................................................................................59
h FINEPIX COLOR .....................................................................59
c CONTINUOUS (Continuous shooting) .........................60
The Playback Menu.......................................................................61
Using the Playback Menu .........................................................61
Playback Menu Options.............................................................61
u TRIMMING FOR BLOG ........................................................62
B SLIDE SHOW ..........................................................................63
b RED EYE REMOVAL ..............................................................63
D IMAGE ROTATE......................................................................64
E PROTECT .................................................................................65
H TRIMMING ..............................................................................66
F COPY.........................................................................................67
I VOICE MEMO .........................................................................69
The Setup Menu .............................................................................71
Using the Setup Menu ...............................................................71
Setup Menu Options...................................................................72
a IMAGE DISP. ..........................................................................73
b FRAME NO. ............................................................................74
k ILLUMINATION.....................................................................74
c DIGITAL ZOOM ....................................................................75
h LCD POWER SAVE ...............................................................75
f VOLUME .................................................................................75
j SOUND ...................................................................................76
g LCD BRIGHTNESS................................................................76
m FORMAT .................................................................................76
o AUTO POWER OFF ..............................................................76
p TIME DIFFERENCE...............................................................77
vii
Table of Contents
Technical Notes
Optional Accessories ...................................................................78
Accessories from Fujifilm ..........................................................79
Troubleshooting
Troubleshooting ............................................................................80
Warning Messages and Displays ............................................87
Appendix
Glossary .............................................................................................91
Internal Memory/Memory Card Capacity ..........................92
Specifications ..................................................................................93
Caring for the Camera .................................................................97
viii
Introduction
Symbols and Conventions
Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simplified for explanatory purposes.
Before You Begin
The following symbols are used in this manual:
Caution: This information should be read before use to ensure correct operation.
Note: Points to note when using the camera.
Tip: Additional information that may be helpful when using the camera.
Supplied Accessories
The following items are included with the camera:
AC adapter
(The type of the
plug depends on the
country or region
where you purchased
NP-45A rechargeable the camera.)
battery
Attaching the Strap
Attach the strap as shown.
Strap
FinePix software CD
USB cable
Owner’s Manual
(may be distributed on
CD in some countries
or regions)
1
Introduction
Parts of the Camera
For more information, refer to the page listed to the right of each item.
1
8
2
Selector button
34
Move cursor up
I (delete) button (pg. 20)
9
5
10
11
12
13
18
17
21 19
7
6
16
Move cursor right
K (flash) button
(pg. 26)
Move cursor left
L (macro)
button (pg. 25)
15 14
Move cursor down
J (self-timer) button (pg. 28)
20
1
2
3
4
5
6
Shutter button ...........................................19 8 Monitor ............................................................. 3
Flash..................................................................26 9 W (zoom out) button .....................17, 35
Lens
10 T (zoom in) button ...........................17, 35
Microphone .................................................69 11 D (playback) button ............................34
Speaker ...........................................................70 12 USB multi-connector ........ 6, 42, 43, 53
Shooting indicator ..................................74 13 Strap eyelet .................................................... 1
16 DISP (display)/BACK button ..........18, 34
( (silent mode) button ....................27
17 Battery-chamber cover .......................... 4
18 Tripod mount
19 Memory card slot ....................................... 9
20 Battery chamber ......................................... 4
Self-timer lamp ..........................................29 14 MENU/OK button .........................................14 21 Battery latch .................................................. 4
Charging indicator .................................... 6 15 A (movie recording) button...........40
7 n switch and lens cover........13
2
Introduction
The Monitor
The following indicators may appear in the monitor during shooting and playback:
1
2
3
4
5
6
7
8
9
10
11
12
13
N 17
ISO 100
AF
M
12 / 31 / 2050
10:00 AM
-1 2 3
14
15
16
17
18
19
20
1
2
3
4
5
6
7
8
9
10
11
Macro (close-up) mode............. 25
Flash mode.........................................26
Silent mode .......................................27
Intelligent Face Detection
indicator ..............................................21
Shooting mode .............................. 30
Battery level .......................................16
Self timer indicator ........................28
White balance ................................. 58
Focus frame .......................................18
Date and time...................................14
Continuous mode ........................ 60
12 Movie quality ................................... 40
13 Image quality................................... 58
14 Number of available frames
...................................................................92
15 FINEPIX COLOR ................................59
16 Focus warning .................................18
17 Blur warning ......................................26
18 Sensitivity ............................................59
19 Internal memory indicator * ....... 8
20 Exposure compensation ...........57
Before You Begin
■ Shooting
* Indicates that no memory card is inserted and that pictures will be
stored in the camera’s internal memory (pg. 8).
■ Playback
7
1
2
3
100-0001
N
8
ISO 100
4
5
6
9
10
1 Intelligent Face Detection
6
indicator ...............................................35 7
2 Silent mode indicator..................27 8
3 Playback mode indicator ......... 34 9
4 Protected image .............................65 10
5 Voice memo indicator................ 69
Red-eye removal indicator ......63
Gift image .......................................... 34
Frame number .................................74
DPOF print indicator ....................47
Blog image .........................................62
12 / 31 / 2050 10:00 AM
-1 2 3
250
F4.2
3
Inserting the Battery
The following explains how to insert the battery into the camera.
1 Open the battery-chamber cover.
First Steps
Note
Be sure the camera is off before opening the
battery-chamber cover.
Cautions
• Do not turn the camera on or off while the
battery-chamber cover is open. Failure to
observe this precaution could result in damage
to image files or memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
the battery.
2 Insert
Face the gold terminals
downward and align
the orange stripe on
the battery with the
orange battery latch.
Keeping the battery
latch pressed to the side
(q), slide the battery
into the camera (w).
Confirm that the battery is securely latched.
Orange stripe
Battery latch
4
Inserting the Battery
Caution
Insert the battery in the correct orientation. Do
NOT use force or attempt to insert the battery
upside down or backwards. The battery will
slide in easily in the correct orientation.
First Steps
3 Close the battery-chamber cover.
Tips: Using an AC Adapter
• The camera can be powered by a supplied AC
adapter. See page 6 for details.
• If the camera is powered by an AC adapter, demo
mode instructions will be displayed when the
camera is turned on. Selecting this option starts a
slide show. To cancel, press the shutter button.
Removing the Battery
After turning the camera off, open the batterychamber cover, press the battery latch to the side,
and slide the battery out of the camera as shown.
Battery latch
5
Charging the Battery
The battery is not charged at shipment. Charge the battery before use.
the supplied AC adapter into the
1 Connect
USB multi-connector.
Confirm that the camera is off.
Charging indicator
the AC adapter in.
2 Plug
Plug the AC adapter into a power outlet.
The Charging indicator will light up.
The Charging Indicator
The charging indicator shows battery charge
status as follows:
Charging indicator Battery status
Action
Check that
the battery
Battery not
inserted.
is properly
Off
inserted
Battery fully Charging is
charged.
complete
Battery
Glows
—
charging.
Unplug the
Blinks
Battery fault. AC adapter
(pg. 80)
Charge the battery.
3 Charging
is complete when the charging
indicator turns off.
Note
The battery cannot be charged when the camera is on.
6
Charging the Battery
First Steps
Cautions: Caring for the Battery
• The only types of batteries you can use are NP-45A.
• Use only the camera to charge NP-45A. Failure to observe this precaution could result in product malfunction.
• Do not affix stickers or other objects to the battery. Failure to observe this precaution could make it
impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery could overheat.
• Do not remove the labels from the battery or attempt to split or peel the outer casing.
• The battery gradually loses its charge when not in use. Charge the battery one or two days before use.
• Read the supplied documentation for additional cautions concerning battery use.
Caution: Battery Life
A noticeable decrease in the length of time the battery will hold a charge indicates that it has reached the end
of its service life and should be replaced.
Cautions: Charging the Battery
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could
prevent the battery from charging.
• Charging times increase at low temperatures.
7
Inserting a Memory Card
Although the camera can store pictures in internal memory, SD memory cards (sold separately) can
be used to store additional pictures.
When no memory card is inserted, d appears in the monitor and internal memory is used for recording
and playback. Note that because camera malfunction could cause internal memory to become
corrupted, the pictures in internal memory should periodically be transferred to a computer and
saved on the computer hard disk or on removable media such as CDs or DVDs. The pictures in
internal memory can also be copied to a memory card (see page 67). To prevent internal memory
from becoming full, be sure to delete pictures when they are no longer needed.
When a memory card is inserted as described below, the card will be used for recording and playback.
■ Compatible Memory Cards
SanDisk SD and SDHC memory cards have been tested and approved for use in the camera. A complete
list of approved memory cards is available at http://www.fujifilm.com/products/digital_cameras/index.html.
Operation is not guaranteed with other cards. The camera can not be used with MultiMediaCard (MMC)
or xD-Picture cards.
Caution
SD memory cards can be locked, making it impossible to format the card
or to record or delete images. Before inserting an SD memory card, slide
the write-protect switch to the unlocked position.
8
Write-protect
switch
Inserting a Memory Card
■ Inserting a Memory Card
1 Open the battery-chamber cover.
the memory card.
2 Insert
Holding the memory card in the orientation
shown below, slide it all the way in. Press
firmly until it clicks into place.
Click
Note
Be sure the camera is off before opening the
battery-chamber cover.
Cautions
• Do not turn the camera on or off while the
battery-chamber cover is open. Failure to
observe this precaution could result in damage
to image files or memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
First Steps
Battery
• Be sure card
is at correct
orientation; do
not insert at an
angle or use
force.
• If the battery-chamber cover cannot be closed,
do not attempt to close it with excessive force,
check that the card is correctly orientated.
• If the images are recorded in the internal
memory after the card is inserted, check that
the card is correctly inserted.
9
Inserting a Memory Card
3 Close the battery-chamber cover.
10
Inserting a Memory Card
Removing Memory Cards
Be sure the camera is off before opening the batterychamber cover. Press the card in and then release it
slowly. The card can now be removed by hand.
First Steps
Cautions
• The memory card may spring out if you remove
your finger immediately after pushing the card in.
• Memory cards may be warm to the touch after
being removed from the camera. This is normal
and does not indicate a malfunction.
Cautions
• Format SD memory cards before first use, and be
sure to reformat all memory cards after using them
in a computer or other device. For more information
on formatting memory cards, see page 76.
• Memory cards are small and can be swallowed;
keep out of reach of children. If a child swallows a
memory card, seek medical assistance immediately.
• Do not use miniSD or microSD adapters
that expose the back of the card. Failure
to observe this precaution may cause
damage or malfunction. Adapters that
are larger or smaller than the standard
dimensions of an SD card may not eject normally; if
the card does not eject, take the camera to an
authorized service representative. Do not forcibly
remove the card.
• Do not turn the camera off or remove the memory
card while the memory card is being formatted or
data are being recorded to or deleted from the card.
Failure to observe this precaution could damage the
card.
• Do not affix labels to memory cards. Peeling labels
can cause camera malfunction.
• Movie recording may be interrupted with some
types of SD memory card.
11
Inserting a Memory Card
• The data in internal memory may be erased or
corrupted when the camera is repaired. Please note
that the repairer will be able to view pictures in
internal memory.
• Formatting a memory card or internal memory
in the camera creates a folder in which pictures
are stored. Do not rename or delete this folder or
use a computer or other device to edit, delete, or
rename image files. Always use the camera to delete
pictures from memory cards and internal memory;
before editing or renaming files, copy them to a
computer and edit or rename the copies, not the
originals.
12
Turning the Camera On and Off
Shooting Mode
Playback Mode
To turn the camera on, open the lens cover fully.
The camera turns off when the lens cover is
closed.
If the lens cover is closed, the camera can be
turned on in playback mode by pressing the D
button for about a second.
First Steps
Camera On
Camera Off
Tip: Switching to Playback Mode
Press the D button to start playback. Press the
shutter button halfway to return to shooting mode.
Cautions
• Pictures can be affected by fingerprints and other
marks on the lens. Keep the lens clean.
• Closing the cover does not completely cut power to
the camera.
If the lens cover is closed, pressing the D button
during playback will turn the camera off.
Tip: Switching to Shooting Mode
To exit to shooting mode, press the shutter button
halfway. Press the D button to return to playback.
Tip: Auto Power Off
The camera will turn off automatically if no operations are performed for the length of time selected in the
AUTO POWER OFF menu (see page 76). To turn the camera on, close and reopen the lens cover or press the
D button for about a second.
13
Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 71).
1 Choose a language.
2 Set the date and time.
START MENU
/ LANG.
DATE / TIME NOT SET
SET
2011
2010
NO
1.1 Press the selector up, down,
left, or right to highlight a
language.
1.2 Press MENU/OK.
YY.MM.DD
2009
SET
NO
1. 1 12 : 00
AM
2.1 Press the selector left or right
to highlight the year, month,
day, hour, or minute and
press up or down to change.
To change the order in which the year,
month, and day are displayed, highlight
the date format and press the selector
up or down.
2.2 Press MENU/OK.
14
2008
2007
Basic Setup
Note
Go to the setup menu if you try to set the language
and date again (pg. 71).
First Steps
Tip: The Camera Clock
If the battery is removed for an extended period, the
camera clock will be reset when the camera is turned
on. If the battery is left in the camera for about two
hours, the battery can be removed for about 24 hours
without resetting the clock.
15
Taking Pictures in k (AUTO) Mode
This section describes how to take pictures in AUTO mode. AUTO mode is automatically selected the
first time the camera is turned on; for information on restoring AUTO mode after shooting in other
modes, see page 30.
the camera on.
1 Turn
Fully open the lens cover.
the battery level.
2 Check
Check the battery level in the monitor.
Camera On
Basic Photography and Playback
16
q
w
e
r
Indicator
Description
Battery partially discharged.
q (white)
Battery more than half discharged.
w (white)
Low battery. Charge as soon as
e (red)
possible.
r (blinks red) Battery exhausted. Turn camera off
and charge battery.
Taking Pictures in k (AUTO) Mode
the picture.
3 Frame
Position the main subject in the focus area
and use the zoom buttons to frame the
picture in the monitor.
Press W to zoom out
Press T to zoom in
Holding the Camera
Hold the camera steady
with both hands and
brace your elbows against
your sides. Shaking or
unsteady hands can blur
your shots.
Zoom in using optical
zoom, or use digital
zoom (pg. 75) to
zoom in closer.
Basic Photography and Playback
To prevent pictures that
are out of focus or too
dark (underexposed),
keep your fingers and
other objects away from
the lens and flash.
Zoom indicator
Tip: Focus Lock
Use focus lock (pg. 23) to focus on subjects that are not in the focus frame.
17
Taking Pictures in k (AUTO) Mode
The Framing Grid
To display best framing (the framing grid) or to view
or hide other indicators in the monitor, press the
DISP/BACK button.
4 Focus.
Press the shutter button halfway to focus on
the main subject in the focus frame.
1/250
Focus frame
F4.2
Camera selects small
focus frame and
Press
focuses on subject
halfway
If the camera is able to focus, it will beep twice.
Indicators
displayed
Indicators
hidden
Best framing
To use best framing, position the main subject at
the intersection of two lines or align one of the
horizontal lines with the horizon. Use focus lock (pg.
23) to focus on subjects that will not be in the center
of the frame in the final photograph.
18
If the camera is unable to focus, the focus frame
will turn red and a R indicator will appear
in the monitor. Change the composition or
use focus lock (pg. 23).
Note
The lens may make a noise when the camera focuses.
This is normal.
Taking Pictures in k (AUTO) Mode
5 Shoot.
Smoothly press the shutter
button the rest of the way down
to take the picture.
Double
beep
Press
halfway
Click
Press the rest of the
way down
Note
If the subject is poorly lit, the flash may fire when the
picture is taken. To take pictures without the flash,
choose another flash mode (pg. 26).
Basic Photography and Playback
Tip: The Shutter Button
The shutter button has two positions. Pressing the
shutter button halfway sets focus and exposure; to
shoot, press the shutter button the rest of the way
down.
19
Viewing Pictures
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results.
1 Press the D button.
The most recent picture will be displayed in
the monitor.
Deleting Pictures
To delete the picture
currently displayed in
the monitor, press the
selector up (I). The
following dialog will be
displayed.
ERASE OK?
100-0001
100
0001
N
ISO 100
OK
CANCEL
SET
12 / 31 / 2050 10:00 AM
250 F4.2
additional pictures.
2 View
Press the selector right to view
pictures in the order recorded,
left to view pictures in reverse
order.
Press the shutter button halfway to exit to
shooting mode.
20
To delete the picture, press the selector
left to highlight OK and press MENU/OK.
To exit without deleting the picture,
highlight CANCEL and press MENU/OK.
Tip: The Playback Menu
Pictures can also be deleted from the playback
menu (pg. 38).
B Intelligent Face Detection and Red-Eye Removal
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for
group portraits to prevent the camera from focusing on the background. Intelligent Face Detection
also offers a red-eye removal option for removing “red-eye” effects caused by the flash.
1 Turn Intelligent Face Detection on.
1.1 Press MENU/OK to display the
shooting menu.
SHOOTING MENU
FACE DETECTION
N
IMAGE QUALITY
OFF
Description
Intelligent Face Detection and redeye removal on. Use with the flash.
Intelligent Face Detection on; redeye removal off.
Intelligent Face Detection and redeye removal off.
MOVIE QUALITY
ISO
AUTO
1.2 Press the selector up or
down to highlight c FACE
DETECTION.
1.3 Press the selector right
to display Intelligent Face
Detection options.
1.4 Press the selector up or down
to highlight the desired option.
1.5 Press MENU/OK to select the
highlighted option and return
to shooting mode.
A B icon appears in the
monitor when Intelligent Face
Detection is on.
More on Photography
SHOOTING MODE
Option
B ON
S ON
B ON
S OFF
the picture.
2 Frame
If a face is detected, it will be indicated by
a green border. If there is more than one
face in the frame, the camera will select the
face closest to the center; other faces are
indicated by white borders.
21
B Intelligent Face Detection and Red-Eye Removal
Intelligent Face Detection
Intelligent Face Detection is
recommended when using
the self-timer for group- or
self-portraits (pg. 28).
7
Green border
3 Focus.
Press the shutter button halfway
to set focus and exposure for
the subject in the green border.
4 Shoot.
Press the shutter button all the
way down to shoot.
If B ON S ON is selected, the picture will
be processed to reduce red-eye before it is
recorded.
REMOVING
22
When a picture taken with Intelligent Face Detection
is displayed, the camera can automatically select
faces for playback zoom (pg. 35), slide shows (pg. 63),
cropping (pg. 66), red-eye removal (pg. 63), and
zoom (continuous) (pg. 73).
Cautions
• If no face is detected when the shutter-release
button is pressed halfway (pg. 82), the camera will
focus on the subject at the center of the monitor
and red-eye will not be removed. If the camera
is unable to detect a face, turn Intelligent Face
Detection off and use focus lock (pg. 23).
• If the subject moves as the shutter button is pressed,
their face may not be in the area indicated by the
green border when the picture is taken.
• In each shooting mode, the camera will detect and
focus on faces but exposure will be optimized for
the entire scene rather than the selected portrait
subject.
Focus Lock
To compose photographs with off-center subjects:
1 Position the subject in the focus frame.
the picture.
3 Recompose
Keeping the shutter button pressed
halfway, recompose the picture.
2 Focus.
Press the shutter button halfway to set
Press
halfway
250
F4.2
F4.2
4 Shoot.
Press the shutter-release button the rest of
the way down to take the picture.
Press the rest of
the way down
More on Photography
focus and exposure. Focus and exposure
will remain locked while the shutter button
is pressed halfway (AF/AE lock).
250
Repeat steps 1 and 2 as desired to refocus
before taking the picture.
23
Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects
listed below. If the camera is unable to focus using autofocus, use focus lock (pg. 23) to focus on another
subject at the same distance and then recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
•
•
•
•
Subjects photographed through a window or other reflective object.
Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
Insubstantial subjects, such as smoke or flame.
Subjects that show little contrast with the background (for example, subjects in clothing that is the same
color as the background).
• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
24
L Macro mode (Close-ups)
To select macro mode, press the selector left (L).
L icon appears in
monitor when camera
is in macro mode
When macro mode is in effect, the camera focuses on subjects near the center of the monitor. Use
the zoom buttons to frame pictures.
Note
Use of a tripod is recommended to prevent blur caused by camera shake.
More on Photography
To exit macro mode, press the selector left (L). Macro mode can also be cancelled by turning the
camera off or selecting another shooting mode.
25
K Using the Flash (Intelligent Flash)
To choose a flash mode, press the selector right (K). The
flash mode changes each time the selector is pressed; in
modes other than AUTO, the current mode is indicated by
an icon in the monitor. Choose from the following options
(some options are not available in all shooting modes; see
the restrictions in another supplied document):
Mode
Description
AUTO (no icon) The flash fires when required. Recommended in most situations.
The flash fires whenever a picture is taken. Use for backlit subjects or for natural coloration
K (fill flash)
when shooting in bright light.
W (suppressed The flash does not fire even when the subject is poorly lit. 0 will appear in the monitor at
flash)
slow shutter speeds to warn that pictures may be blurred. Use of a tripod is recommended.
Capture both the main subject and the background when shooting at night (note that
T (slow sync) brightly lit scenes may be overexposed). If U is selected for a SHOOTING MODE, shutter
speed may be slow. Use a tripod.
Caution
The flash may fire several times with each shot. Do not move the camera until shooting is complete.
26
K Using the Flash (Intelligent Flash)
Red-Eye Removal
When S ON is selected for Intelligent Face
Detection (pg. 21), red-eye removal (S) is available
in AUTO (V), fill flash (U), and slow sync (Z)
modes. Red-eye removal minimizes “redeye” caused when light from the flash
is reflected from the subject’s retinas as
shown in the illustration at right.
" Silent Mode
In situations in which camera sounds or light from
the flash may be unwelcome, press the DISP/BACK
button until " is displayed in the monitor.
More on Photography
The camera speaker, shooting indicator, flash, and
indicator and self-timer lamps turn off. Flash and
volume settings (pg. 75) can not be adjusted while
silent mode is in effect. To restore normal operation,
press the DISP/BACK button until the " icon is no
longer displayed.
27
J Using the Self-Timer
The camera offers a ten-second timer that
allows photographers to appear in their own
photographs, and a two-second timer that can
be used to avoid blur caused by the camera
moving when the shutter button is pressed.
the timer.
1 Set
The current self-timer mode is displayed in
the monitor. To choose a different setting,
press the selector down (J). The selection
changes each time the selector is pressed.
The current self-timer
mode is displayed in the
monitor.
c : The picture is taken
after 10 seconds.
b : The picture is taken
after 2 seconds.
28
2 Focus.
Press the shutter button halfway
to focus.
Caution
Stand behind the camera when using the
shutter button. Standing in front of the lens can
interfere with focus and exposure.
the timer.
3 Start
Press the shutter button the rest
of the way down to start the
timer. The display in
the monitor shows
the number of
seconds remaining
until the shutter is
released. To stop
the timer before the
picture is taken, press DISP/BACK.
J Using the Self-Timer
The self-timer lamp on the front of the
camera will blink immediately before the
picture is taken. If the two-second timer is
selected, the self-timer lamp will blink as the
timer counts down.
More on Photography
Intelligent Face Detection
Because it ensures that the faces of portrait
subjects will be in focus, Intelligent Face Detection
(pg. 21) is recommended when using the self-timer
for group portraits or self-portraits. To use the selftimer with Intelligent Face Detection, set the timer
as described in Step 1 and then press the shutter
button all the way down to start the timer. The
camera will detect faces while the timer is counting
down and adjust focus and exposure immediately
before the shutter is released. Be careful not to
move until the picture has been recorded.
29
a Shooting Mode
Choose a shooting mode according to the scene or type of subject.
Selecting a Shooting Mode
MENU/OK to display the
1 Press
shooting menu.
MENU/OK to select the
5 Press
highlighted option.
Note
See the restrictions in another supplied document for
flash mode setting.
SHOOTING MENU
SHOOTING MODE
FACE DETECTION
IMAGE QUALITY
N
MOVIE QUALITY
ISO
AUTO
the selector up or down to
2 Press
highlight a SHOOTING MODE.
the selector right to display
3 Press
shooting mode options.
the selector up or down to
4 Press
highlight the desired mode.
30
Shooting Modes
M MANUAL
Choose this mode for complete control
of shooting settings, including exposure
compensation (pg. 57), and white balance
(pg. 58).
k AUTO
Choose for crisp, clear snapshots (pg. 16). This
mode is recommended in most situations.
a Shooting Mode
Subject
Icon
PORTRAIT
H
LANDSCAPE
I
NIGHT
J
MACRO
K
BACKLIGHT
PORTRAIT
T
Description
For soft-toned portraits with
natural skin tones.
For crisp, clear daylight shots of
buildings and landscapes.
For night and twilight scenes,
using a high sensitivity setting
to minimize blurring.
For clear close-ups of flowers,
etc.
For a subject backlit against the
sun, preventing the background
from becoming dim.
Subject
NIGHT
PORTRAIT
Icon
Z
Description
For a subject in a dim place,
reducing blur.
Tip
When a subject can not be analyzed by the camera,
LAUTO mode will be set.
Notes
• B Intelligent Face Detection is turned on
automatically.
• The camera continuously adjusts focus on a face, or
the center area of the monitor.
• Continuous auto focus will be audible and battery
drain will increase.
More on Photography
G SCENE RECOGNITION
Simply by pointing the camera at the subject,
the camera automatically analyzes and selects
the most appropriate setting using scene
recognition.
The camera analyzes a
subject based on scene
recognition, then an icon
appears in the bottom
left of the monitor. (The
illustration shows camera
analysis of a portrait subject.)
31
a Shooting Mode
B NATURAL LIGHT
Capture natural light indoors, under low light, or
where the flash can not be used. The flash turns
off and sensitivity is raised to reduce blur.
U NIGHT (TRIPOD)
Slow shutter speeds are used to record night
scenes. Use of a tripod is recommended to
prevent camera shake.
C PORTRAIT
Choose this mode for soft-toned portraits with
natural skin tones.
E SUNSET
Choose this mode to record the vivid colors in
sunrises and sunsets.
K LANDSCAPE
Choose this mode for crisp, clear daylight shots
of buildings and landscapes.
F SNOW
Choose for crisp, clear shots that capture the
brightness of scenes dominated by shining white
snow.
L SPORT
Choose this mode when photographing moving
subjects. Priority is given to faster shutter
speeds.
D NIGHT
A high sensitivity setting is selected
automatically to minimize blurring for recording
night and twilight scenes.
32
G BEACH
Choose for crisp, clear shots that capture the
brightness of sunlit beaches.
I PARTY
Capture indoor background lighting under lowlight conditions.
a Shooting Mode
O FLOWER
Choose for vivid close-ups of flowers. The
camera focuses in the macro range and the flash
turns off automatically.
P TEXT
Take clear pictures of text or drawings in print.
The camera focuses in the macro range.
More on Photography
C ANTI-BLUR (Picture Stabilization)
Choose this mode for fast shutter speeds that
reduce blur caused by camera shake or subject
movement.
33
Single-Frame Playback
To view the most recent picture in the monitor,
press the D button.
100-0001
100
0001
N
Choosing a Display Format
Press the DISP/BACK button to cycle through playback
display formats as shown below.
ISO 100
12 / 31 / 2050 10:00 AM
250 F4.2
More on Playback
Press the selector right to view
pictures in the order recorded, left to
view pictures in reverse order. Keep
the selector pressed to scroll rapidly
to the desired frame.
100-0001
0001
100
N
ISO 100
12 / 31 / 2050 10 : 00 AM
250
F4.2
Indicators
displayed
12/31
1/13
Sort by date
Note
Pictures taken using other cameras are indicated by a e (“gift image”) icon during playback.
34
Indicators
hidden
2050
Single-Frame Playback
Playback Zoom
Press T to zoom in on images
displayed in single-frame playback;
press W to zoom out.
Press W to zoom out
Press T to zoom in
Zoom indicator
Navigation window shows
portion of image currently
displayed in monitor
Intelligent Face Detection
If the current picture was
taken using Intelligent Face
Detection (pg. 21), B will
appear in the monitor. Press
FACE ZOOM
BACK
the Y button to cycle
through the subjects detected by Intelligent Face
Detection, or use the W and T buttons to zoom the
current subject in and out as described above.
More on Playback
When the picture is zoomed in, the
selector can be used to view areas of
the image not currently visible in the
display.
Note
The maximum zoom ratio varies with image size.
Playback zoom is not available with pictures taken at
an image size of p, or v blog images.
Press DISP/BACK to exit zoom.
35
Multi-Frame Playback
To change the number of images
displayed, press W when a picture is
shown full-frame in the monitor.
100-0001
0001
100
N
ISO 100
12 / 31 / 2050 10 : 00 AM
F4.2
250
Press the
W button
to increase
the number
of pictures
displayed to
two, nine, or a
hundred.
36
Press T to reduce
the number
of images
displayed.
Use the selector to highlight images and press
MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press
the selector up or down to view more pictures.
Sort by Date
In single-frame playback, press DISP/
1 BACK
until the sort-by-date screen is
displayed.
The picture displayed
in the single-frame
playback remains
selected.
2050
12/31
1/13
the selector up or down to
2 Press
select a date.
Tips: Rapid Scroll
• Press and hold the selector up or down to scroll
dates rapidly.
• Press and hold the selector left or right to rapidly
scroll pictures taken on the same date.
More on Playback
the selector left or right to
3 Press
select a picture.
37
A Deleting Pictures
The ERASE option in the playback menu can be used to delete still pictures and movies, increasing
the amount of space available on the memory card or in internal memory (for information on
deleting pictures in single-frame playback, see page 20). Note that deleted pictures can not be
recovered. Copy important pictures to a computer or other storage device before proceeding.
MENU/OK to display the
1 Press
playback menu.
the selector up or down to
4 Press
highlight FRAME or ALL FRAMES.
PLAYBACK MENU
ERASE
TRIMMING FOR BLOG
SLIDE SHOW
RED EYE REMOVAL
IMAGE ROTATE
the selector up or down to
2 Press
highlight ERASE.
the selector right to display
3 Press
delete options.
PLAYBACK MENU
ERASE
BACK
TRIMMING FOR BLOG FRAME
ALL FRAMES
SLIDE SHOW
RED EYE REMOVAL
IMAGE ROTATE
38
MENU/OK to display options for
5 Press
the selected item (see pg. 39).
Tips: Deleting Pictures
• When a memory card is inserted, pictures will be
deleted from the memory card; otherwise, pictures
will be deleted from internal memory.
• Protected pictures can not be deleted. Remove
protection from any pictures you wish to delete (pg.
65).
• If a message appears stating that the selected
images are part of a DPOF print order, press MENU/OK
to delete the pictures.
A Deleting Pictures
■ FRAME
FRAME:: Deleting Selected Images
ERASE OK?
Selecting FRAME displays
the dialog shown at right.
YES
■ ALL FRAMES
FRAMES:: Deleting All Images
ERASE ALL OK?
Selecting ALL FRAMES
IT MAY TAKE A WHILE
displays the confirmation
shown at right.
OK
Press DISP/BACK to exit when all the desired
pictures have been deleted.
Press MENU/OK to delete all
unprotected pictures.
The dialog shown at right is
displayed during deletion.
Press DISP/BACK to cancel
before all pictures have
been deleted (any pictures
deleted before the button
was pressed can not be
recovered).
CANCEL
More on Playback
Press the selector left or
right to scroll through
pictures and press MENU/OK
to delete the current picture
(the picture is deleted
immediately; be careful not
delete the wrong picture).
CANCEL
SET
CANCEL
39
A Recording Movies
The A button can be used to shoot short movies in all shooting modes. Sound is recorded via the
built-in microphone; do not cover the microphone during recording.
the scene using the zoom
1 Frame
buttons.
Zoom indicator
Movies
40
Optical zoom can not be adjusted once
recording begins. Digital zoom can be used
during recording if ON is selected for the
DIGITAL ZOOM option in the setup menu
(pg. 75).
Choosing the Frame Size
SHOOTING MENU
To choose the frame size,
MOVIE QUALITY
99m59s
press MENU/OK and select
ISO
999m59s
FINEPIX COLOR
0 MOVIE QUALITY.
CONTINUOUS
Choose ! (640 × 480
SET-UP
pixels) for better quality,
9 (320 × 240 pixels) for longer movies. Press
MENU/OK to return to movie recording mode.
the A button to start
2 Press
recording.
REC
12s
1
and time
remaining are
displayed in
monitor
the A button again to
3 Press
end recording. Recording ends
automatically when the movie
reaches maximum length or
memory is full.
Notes
• Focus is set when recording begins; exposure
and white balance are adjusted automatically
throughout recording. The color and brightness
of the image may vary from that displayed before
recording begins.
• Some operating noise of the camera may be
recorded during movie shooting.
D Viewing Movies
During playback (pg. 34),
movies are displayed in the
monitor as shown at right.
100-006
PLAY
12 / 31 / 2050
10 : 00 AM
Press the selector down to start playback.
15s
STOP
PAUSE
Progress is shown
in the monitor.
Progress bar
Note
Fast forward and rewind are not available.
Cautions
• Do not cover the speaker during playback.
• Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
Movies
To end playback, press the selector up; to pause
playback, press the selector down. Press the
selector left or right to view other pictures.
Volume can be adjusted in the setup menu (pg.
75).
Tip: Deleting Movies
To delete movies during playback, press the selector
up (I) once to end playback and then press the I
button again.
41
Viewing Pictures on TV
Connect the camera to a TV and tune the television to the video channel to show pictures and slide
shows (pg. 63) to a group.
1 Connect an A/V cable (optional), as shown below.
Insert an optional A/V cable
into the USB multi-connector
of the camera.
Connect yellow plug
to video-in jack
Connect white plug
to audio-in jack
the television to the video channel.
2 Tune
The camera monitor turns off and pictures, voice memos, and movies are played back on the TV.
Note that the camera volume controls have no effect on sounds through the TV; use the television
volume controls to adjust the volume.
Connections
42
3 Press the D for about a second to turn the camera on.
Note
Image quality deteriorates slightly during movie playback.
Caution
When making the A/V cable connection, be sure the connectors are fully inserted.
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected directly to a printer and
pictures can be printed without first being copied to a computer. Note that depending
on the printer, not all the functions described below may be supported.
Connecting the Camera
Printing Selected Pictures
Press the D for about a second to turn the
1 camera
on.
the selector left or right to
1 Press
display a picture you wish to print.
Note
Be sure the battery is inserted for proper
connection.
the supplied USB cable as shown
2 Connect
and turn the printer on.
the selector up or down to
2 Press
choose the number of copies (up to
99).
steps 1–2 to select
3 Repeat
additional pictures. Press MENU/OK
to display a confirmation dialog
when settings are complete.
USB
PICTBRIDGE
TOTAL: 00000
YES
CANCEL
Connections
w USB will be displayed in the monitor,
followed by the PictBridge display shown
below at right.
PRINT THESE FRAMES
TOTAL: 9 SHEETS
4 Press MENU/OK to start printing.
00 SHEETS
FRAME
OK
SET
43
Printing Pictures via USB
Tip: Printing the Date of Recording
To print the date of recording on pictures, press DISP/
BACK in steps 1–2 to display the PictBridge menu (see
“Printing the DPOF Print Order”). Press the selector
up or down to highlight PRINT WITH DATE y and
press MENU/OK to return to the PictBridge display (to
print pictures without the date of recording, select
PRINT WITHOUT DATE). The date will not be printed
if the camera clock was not set when the picture was
taken.
Note
If no pictures are selected when the MENU/OK button is
pressed, the camera will print one copy of the current
picture.
Printing the DPOF Print Order
To print the print order created with C PRINT
ORDER (DPOF) in the playback menu (pg. 46):
display, press DISP/
1 InBACKthetoPictBridge
open the PictBridge menu.
PICTBRIDGE
PRINT WITH DATE
PRINT WITHOUT DATE
PRINT DPOF
the selector up or down to
2 Press
highlight x PRINT DPOF.
MENU/OK to display a
3 Press
confirmation dialog.
PRINT DPOF OK?
TOTAL: 9 SHEETS
YES
CANCEL
4 Press MENU/OK to start printing.
44
Printing Pictures via USB
During Printing
The message shown at right
PRINTING
is displayed during printing.
Press DISP/BACK to cancel
before all pictures are printed
CANCEL
(depending on the printer,
printing may end before the current picture has
printed).
Notes
• Print pictures from internal memory or a memory
card that has been formatted in the camera.
• If the printer does not support date printing, the
PRINT WITH DATE y option will not be available
in the PictBridge menu and the date will not be
printed on the pictures in the DPOF print order.
• Default printer page size and print quality settings
are used when printing via direct USB connection.
If Printing is interrupted, disconnect the USB cable
from the camera, turn off the camera, and then
repeat the steps on page 43.
Disconnecting the Camera
Confirm that “PRINTING” is not displayed in the
monitor and disconnect the USB cable.
Connections
45
Printing Pictures via USB
Creating a DPOF Print Order
The C PRINT ORDER (DPOF) option in the
playback menu can be used to create a digital
“print order” for PictBridge-compatible printers
(pg. 43) or devices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is standard
that allows pictures to be printed from
“print orders” stored in internal memory
or on a memory card. The information in the order
includes the pictures to be printed and the number
of copies of each picture.
■ WITH DATE y// WITHOUT DATE
To modify the DPOF print order, select C PRINT
ORDER (DPOF) in the playback menu and press
the multi selector up or down to highlight WITH
DATE y or WITHOUT DATE.
PLAYBACK MENU
PROTECT
TRIMMING
COPY
WITH DATE
WITHOUT DATE
RESET ALL
VOICE MEMO
PRINT ORDER (DPOF)
46
WITH DATE y: Print date of
recording on pictures.
WITHOUT DATE: Print pictures
without date.
Press MENU/OK and follow the steps below.
the selector left or right
1 Press
to display a picture you wish to
include in or remove from the print
order.
the selector up or down to
2 Press
choose the number of copies (up to
99). To remove a picture from the
order, press the selector down until
the number of copies is 0.
PRINT ORDER (DPOF)
DPOF: 00001
Total number of prints
Number of copies
01 SHEETS
FRAME
SET
Printing Pictures via USB
■ RESET ALL
RESET DPOF OK?
To cancel the current print
order, select RESET ALL
in the C PRINT ORDER
(DPOF) menu. The
YES
CANCEL
confirmation shown at right
will be displayed; press MENU/OK to remove all
pictures from the order.
steps 1–2 to complete the
3 Repeat
print order. Press MENU/OK to save
the print order when settings
are complete, or DISP/BACK to exit
without changing the print order.
total number of prints is
4 The
displayed in the monitor. Press
MENU/OK to exit.
The pictures in the current
print order are indicated by
a x icon during playback.
100-0001
0001
100
N
ISO 100
12 / 31 / 2050 10 : 00 AM
F4.2
1/250
Connections
Notes
• Remove the memory card to create or modify a print
order for the pictures in internal memory.
• Print orders can contain a maximum of 999 pictures.
RESET DPOF OK?
• If a memory card is inserted
containing a print order
created by another camera,
the message shown at right
YES
NO
will be displayed. Pressing
MENU/OK cancels the print order; a new print order
must be created as described above.
47
Viewing Pictures on a Computer
The supplied FinePixViewer software can be used to copy pictures to a computer, where they can be
stored, viewed, organized, and printed. Before proceeding, install FinePixViewer as described below.
The latest FinePixViewer is available at http://www.fujifilm.com/. Do NOT connect the camera to the
computer until installation is complete.
Installing FinePixViewer
FinePixViewer is available in a Windows version and a Macintosh version. Installation instructions for
Windows are on pages 48–50, those for the Macintosh on pages 51–52.
Installing FinePixViewer: Windows
Confirm that the computer meets the following system requirements:
1
Preinstalled versions of Windows Vista, Windows XP Home Edition (Service Pack 2), Windows XP Professional
(Service Pack 2), or Windows 2000 Professional (Service Pack 4)*
• Windows Vista: 800 MHz Pentium 4 or better (3 GHz Pentium 4 or better recommended)
CPU • Windows XP: 800 MHz Pentium 4 or better (2 GHz Pentium 4 or better recommended)
• Windows 2000: 200 MHz Pentium or better
• Windows Vista: 512 MB or more (1 GB or more recommended)
RAM • Windows XP: 512 MB or more
• Windows 2000: 128 MB or more
Free disk A minimum of 450 MB required for installation with 600 MB available when FinePixViewer is running (15 GB or
space more recommended under Windows Vista, 2 GB or more recommended under Windows XP)
Video 800 × 600 pixels or more with 16-bit color or better (1,024 × 768 pixels or more with 32-bit color recommended)
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
Other • Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet
connection and e-mail software required to use e-mail option
OS
* To check if FinePixViewer is Windows® 7-compliant, please visit http://www.fujifilm.com/support/download/
camera/software/.
48
Viewing Pictures on a Computer
Caution
Other versions of Windows are not supported. Operation is not guaranteed on home-built computers or
computers that have been upgraded from earlier versions of Windows.
2 Start the computer. Log in to an account with administrator privileges before proceeding.
3 Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
Windows Vista
If an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed;
click Allow.
The installer will start automatically; click Installing FinePixViewer and follow the on-screen
instructions to install FinePixViewer. Note that the Windows CD may be required during
installation.
Connections
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer from the Start menu
(Windows Vista/XP) or double-click the My Computer icon on the desktop (Windows 2000), then doubleclick the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.exe.
49
Viewing Pictures on a Computer
prompted to install Windows Media Player or DirectX, follow the on-screen instructions to
4 Ifcomplete
installation.
When prompted, remove the installer CD from the CD-ROM drive and click Restart to restart the
5 computer.
Store the installer CD in a dry location out of direct sunlight in case you need to reinstall the software. The version number is printed at the top of the CD label for reference when
updating the software or contacting customer support.
Installation is now complete. Proceed to “Connecting the Camera” on page 53.
50
Viewing Pictures on a Computer
Installing FinePixViewer: Macintosh
Confirm that the computer meets the following system requirements:
1
CPU
OS
RAM
Free disk space
Video
Other
PowerPC or Intel
Preinstalled version of Mac OS X version 10.3.9–10.5 (visit http://www.fujifilm.com/ for more information)
256 MB or more
A minimum of 200 MB required for installation with 400 MB available when FinePixViewer is running
800 × 600 pixels or more with thousands of colors or better
• Built-in USB port recommended. Operation is not guaranteed other USB ports.
• Internet connection (56 kbps or faster recommended) required to use FinePix Internet Service; Internet
connection and e-mail software required to use e-mail option
starting the computer and quitting any applications that may be running, insert the installer
2 After
CD in a CD-ROM drive. Double-click the FinePix CD icon on the desktop and double-click
Installer for Mac OS X.
installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter
3 An
an administrator name and password when prompted and click OK, then follow the on-screen
instructions to install FinePixViewer. Click Exit to quit the installer when installation is complete.
Connections
51
Viewing Pictures on a Computer
the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD
4 Remove
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry
location out of direct sunlight in case you need to re-install the software. The version number
is printed at the top of the CD label for reference when updating the software or contacting
customer support.
Select Applications in the Finder Go menu to open the applications folder.
5 Double-click
the Image Capture icon and select Preferences… from the
Image Capture application menu.
The Image Capture preferences dialog will be displayed. Choose Other… in
the When a camera is connected, open menu, then select FPVBridge in
the “Applications/FinePixViewer” folder and click Open.
Select Quit Image Capture from the Image Capture application menu.
Installation is now complete. Proceed to “Connecting the Camera” on page 53.
52
Viewing Pictures on a Computer
Connecting the Camera
pictures you wish to copy are stored
1 Ifonthea memory
card, insert the card into the
camera (pg. 9). If no card is inserted, pictures
will be copied from internal memory.
Caution
Loss of power during transfer could result in loss
of data or damage to internal memory or the
memory card. Check the battery level.
Press the D for about a second to turn the
2 camera
on.
Note
Be sure the battery is inserted for proper
connection.
Connect the camera directly to the computer;
do not use a USB hub or keyboard.
will be displayed. Follow the on-screen
instructions to copy pictures to the computer.
To exit without copying pictures, click
CANCEL.
Caution
If FinePixViewer does not start automatically,
the software may not be correctly installed.
Disconnect the camera and reinstall the software.
For more information on using FinePixViewer,
select How to Use FinePixViewer in the
FinePixViewer Help menu.
Connections
the supplied USB cable as shown,
3 Connect
making sure the connectors are fully inserted.
starts. FinePixViewer will start
4 Transferring
automatically and the “Save Image Wizard”
53
Viewing Pictures on a Computer
Cautions
• Use only memory cards that have been formatted
in the camera and contain pictures taken with
the camera. If a memory card containing a large
number of images is inserted, there may be a delay
before FinePixViewer starts and FinePixViewer may
be unable to import or save images. Use a memory
card reader to transfer pictures.
• Opening or closing the lens cover during transfer
could result in loss of data or damage to internal
memory or the memory card.
• Disconnect the camera before inserting or removing
memory cards.
• In some cases, it may not be possible to access
pictures saved to a network server using
FinePixViewer in the same way as on a standalone
computer.
• The user bears all applicable fees charged by the
phone company or Internet service provider when
using services that require an Internet connection.
54
Disconnecting the Camera
After confirming that transferring has finished, follow
the on-screen instructions to disconnect the camera
and the computer. Turn off the camera.
Uninstalling FinePixViewer
Only uninstall FinePixViewer before reinstalling
the software or when it is no longer required.
After quitting FinePixViewer and disconnecting
the camera, drag the “FinePixViewer” folder from
“Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control
panel and use “Programs and Features” (Windows
Vista) or “Add/Remove Programs” (other versions
of Windows) to uninstall FinePixViewer. Under
Windows, one or more confirmation dialogs may be
displayed; read the contents carefully before clicking
OK.
The Shooting Menu
The shooting menu is used to adjust settings for a wide range of shooting conditions.
Using the Shooting Menu
MENU/OK to display the
1 Press
shooting menu.
the selector right to display
3 Press
options for the highlighted item.
SHOOTING MENU
SHOOTING MODE
FACE DETECTION
IMAGE QUALITY
N
MOVIE QUALITY
ISO
AUTO
Note
The options displayed in the shooting menu vary
depending on the shooting mode.
the selector up or down to
2 Press
highlight the desired menu item.
the selector up or down to
4 Press
highlight the desired option.
MENU/OK to select the
5 Press
highlighted option.
Menus
55
The Shooting Menu
Shooting Menu Options
Menu item
e WHITE BALANCE
Description
Choose a shooting mode according to the type of
subject (pg. 30).
Turn Intelligent Face Detection and red-eye removal
on or off (pg. 21).
Adjust exposure for bright, dark, or high-contrast
scenes (pg. 57).
Adjust color for different light sources (pg. 58).
f IMAGE QUALITY
Choose image size and quality (pg. 58).
0 MOVIE QUALITY
Choose the frame size for movies (pg. 40).
Adjust ISO sensitivity (pg. 59). Choose higher values
when the subject is poorly lit.
Shoot pictures in color or in black-and-white (pg. 59).
Shoot a series of pictures (pg. 60).
Perform basic camera setup such as choosing a
language and setting the time and date (pg. 71).
a SHOOTING MODE
c FACE DETECTION
d EXP. COMPENSATION
g ISO
h FINEPIX COLOR
c CONTINUOUS
j SET-UP
56
Options
Default
M/k/G/B/C/K/L/D/U/
k
E/F/G/I/O/P/C
B ON S ON / B ON S OFF / B ON
OFF
S ON
–2 EV to +2 EV in increments of 1/3 EV
±0
AUTO/p/q/s/t/u/r
rF/rN/g3 : 2/o/n/
m/p
!/9
AUTO/ 1600 / 800 / 400 /
200 / 100
STD/N
m/OFF
AUTO
a/K/L/M
—
rN
!
AUTO
STD
OFF
The Shooting Menu
d EXP. COMPENSATION
Use exposure compensation when
photographing very bright, very dark, or highcontrast subjects.
Choose positive (+) values
to increase exposure
Choosing an Exposure Compensation Value
• Backlit subjects: choose
values from +2/3 EV to +12/3 EV
(for an explanation of the
term “EV”, see the Glossary
on page 91)
• Highly reflective subjects
or very bright scenes (e.g.,
snowfields): +1 EV
Choose negative (–) values
to reduce exposure
• Scenes that are mostly sky: +1 EV
• Spotlit subjects (particularly if photographed against
dark backgrounds): –2/3 EV
• Subjects with low reflectivity (pine trees or darkcolored foliage): –2/3 EV
Menus
Note
At settings other than ±0, a l icon is displayed in the monitor. Exposure compensation is not reset when the
camera is turned off; to restore normal exposure control, choose a value of ±0.
57
The Shooting Menu
e WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation of “white
balance”, see the Glossary on page 91).
Option
AUTO
p
q
s
t
u
r
Displayed in
White balance adjusted automatically.
For subjects in direct sunlight.
For subjects in the shade.
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
f IMAGE QUALITY
Choose the size and quality at which still pictures
are recorded. Large pictures can be printed at
large sizes with no drop in quality; small pictures
require less memory, allowing more pictures to
be recorded.
If AUTO does not produce the desired results
(for example, when taking close-ups), choose the
option that matches the light source.
Option
Prints at sizes up to
rF 31 × 23 cm/12 × 9 in. (r) or 31 × 21 cm/
rN 12 × 8 in. (g3 : 2). Choose rF for highquality prints, g3 : 2 for an aspect ratio of
g3 : 2 3 : 2.
o 22 × 16 cm (8.5 × 6.5 in.)
n 17 × 13 cm (7 × 5 in.)
m 14 × 10 cm (5.3 × 4 in.)
5 × 4 cm (2 × 1.5 in.). Suited to e-mail or the
p
web.
Note
Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
The number of pictures that can be taken at
current settings (pg. 92) is displayed to the right
of the image quality icon in the monitor.
Note
Image quality is not reset when the camera is turned
off or another shooting mode is selected.
58
The Shooting Menu
Aspect Ratio
Pictures taken at an image quality setting of g3 : 2
have an aspect ratio of 3 : 2, the same as a frame of
35-mm film. Pictures taken at other settings have an
aspect ratio of 4 : 3.
Settings other than AUTO
are shown by an icon in the
monitor if you use M.
M
17
N
ISO 100
h FINEPIX COLOR
Shoot pictures in color or in black-and-white.
Option
4:3
3:2
Setting of v-B&W is shown by an icon in the
monitor.
Note
FINEPIX COLOR is not reset when the camera is
turned off or another shooting mode is selected.
Menus
g ISO
Control the camera’s sensitivity to light with M.
Higher values can be used to reduce blur when
lighting is poor; note, however, that mottling
may appear in pictures taken at high sensitivities.
If AUTO is selected, the camera will adjust
sensitivity automatically in response to shooting
conditions.
Displayed in
Standard contrast and saturation.
v-STANDARD
Recommended in most situations.
Nv-B&W Take pictures in black and white.
59
The Shooting Menu
c CONTINUOUS (Continuous shooting)
Select m TOP 3 to capture motion in a series of pictures. The camera takes up
to three pictures while the shutter-release button is pressed.
Notes
• Frame rate varies with shutter speed.
• Focus and exposure are determined by the first frame in each series.
• The number of pictures that can be recorded depends on the memory available.
Additional time may be required to record pictures when shooting ends. The pictures
are displayed in the monitor while recording is in progress.
60
SHOOTING MENU
CONTINUOUS
SET-UP
STORING
TOP 3
OFF
The Playback Menu
The playback menu is used to manage the pictures in internal memory or on the memory card.
Using the Playback Menu
1
Press D to enter playback mode
(pg. 34).
MENU/OK to display the
2 Press
playback menu.
PLAYBACK MENU
ERASE
TRIMMING FOR BLOG
SLIDE SHOW
RED EYE REMOVAL
IMAGE ROTATE
the selector up or down to
3 Press
highlight the desired menu item.
the selector right to display
4 Press
options for the highlighted item.
BACK
TRIMMING FOR BLOG FRAME
ALL FRAMES
SLIDE SHOW
RED EYE REMOVAL
IMAGE ROTATE
MENU/OK to select the
6 Press
highlighted option.
Playback Menu Options
The following options are available:
Option
A ERASE
TRIMMING
u
FOR BLOG
B SLIDE SHOW
RED-EYE
b
REMOVAL
D IMAGE ROTATE
Description
Delete all or selected pictures (pg. 38).
Process still images for posting to a blog
(pg. 62).
View pictures in a slide show (pg. 63).
Create copies with reduced red eye (pg.
63).
Rotate pictures (pg. 64).
Protect pictures from accidental deletion
E PROTECT
(pg. 65).
Create cropped copies of pictures (pg. 66).
H TRIMMING
Copy pictures between internal memory
F COPY
and a memory card (pg. 67).
I VOICE MEMO Add voice memos to pictures (pg. 69).
PRINT ORDER Select pictures for printing on DPOF- and
C
(DPOF)
PictBridge-compatible devices (pg. 44).
Perform basic camera setup (pg. 71).
j SET-UP
Menus
PLAYBACK MENU
ERASE
the selector up or down to
5 Press
highlight the desired option.
61
The Playback Menu
u TRIMMING FOR BLOG
You can process still images
for posting to a blog.
TRIMMING FOR BLOG
TRIMMING
REC
1 Select the frame (file) to process.
the selector down to process
2 Press
the image.
The original image remains
unaltered.
62
CANCEL
Notes
• Press the W and T buttons to zoom the picture in or
out and use the selector to display the portion of the
picture you wish to save before processing it. Press
MENU/OK to crop the picture and return to the image
selection display.
• Blog image size is adjustable in the setup menu.
• Small copies are saved using filenames that begin
with “BLOG”. During playback, small copies are
indicated by a v icon and a black border. Small
copies can not be further cropped or rotated.
The Playback Menu
B SLIDE SHOW
View pictures in an
automated slide show. After
choosing the background
music, choose the type of
show and press MENU/OK
to start. Press DISP/BACK at any time during
the show to view on-screen help. When a
movie is displayed, movie playback will begin
automatically, and the slide show will continue
when the movie ends. The show can be ended
at any time by pressing MENU/OK.
Option
Displayed in
NORMAL
Press selector left or right to go back
or skip ahead one frame. Select WIPE
for wipe transitions between frames.
WIPE
the picture back in the monitor (pictures
1 Play
taken with Intelligent Face Detection are
indicated by a B icon) and select b RED
EYE REMOVAL in the playback menu (pg. 61).
REMOVAL OK?
YES
CANCEL
MENU/OK. The message shown
2 Press
below at left will be displayed while
the camera analyses the image;
if red-eye is detected, the message shown
below at right will be displayed while the
camera processes the image to create a copy
with reduced red-eye.
Menus
As above, except that camera
NORMAL B
automatically zooms in on faces
selected with Intelligent Face
WIPE B
detection.
SELECT BGM Choose background music.
b RED EYE REMOVAL
This option is used with pictures taken using
Intelligent Face Detection to create copies that
have been processed to remove red eye.
63
The Playback Menu
DETECTING
REMOVING
CANCEL
Notes
• Red eye may not be removed if the camera is unable
to detect a face or the face is in profile. Results may
differ depending on the scene. Red eye can not
be removed from pictures that have already been
processed using red-eye removal or pictures created
with other devices.
• The amount of time needed to process the image
varies with the number of faces detected.
• Copies created with b RED EYE REMOVAL are
indicated by a l icon during playback.
D IMAGE ROTATE
By default, pictures taken in
IMAGE ROTATE
tall orientation are
displayed in wide
orientation. Use this option
SET
CANCEL
to display pictures in the
correct orientation in the monitor. It has no
effect on pictures displayed on a computer or
other device.
Notes
• Protected pictures can not be rotated. Remove
protection before rotating pictures (pg. 65).
• The camera may not be able to rotate pictures
created with other devices.
the selector left or right to
1 Press
display the desired picture in the
monitor.
64
The Playback Menu
the selector down to
2 Press
rotate the picture 90 ° clockwise,
up to rotate the picture 90 °
counterclockwise.
E PROTECT
Protect pictures from accidental deletion. The
following options are available.
■ FRAME
Protect selected pictures.
the selector left or right to
1 Press
display the desired picture.
PROTECT OK?
MENU/OK to confirm the
3 Press
operation (to exit without rotating
the picture, press DISP/BACK).
The next time the picture is played back, it will
automatically be rotated.
YES
UNPROTECT OK?
CANCEL
Picture not protected
YES
CANCEL
Protected picture
MENU/OK to protect the
2 Press
picture. If the picture is already
steps 1–2 to protect
3 Repeat
additional images. Press DISP/BACK
Menus
protected, pressing MENU/OK
will remove protection from the
image.
to exit when the operation is
complete.
65
The Playback Menu
■ SET ALL
Press MENU/OK to protect all
pictures, or press DISP/BACK
to exit without changing
picture status.
■ RESET ALL
Press MENU/OK to remove
protection from all pictures,
or press DISP/BACK to exit
without changing picture
status.
SET ALL OK?
IT MAY TAKE A WHILE
YES
CANCEL
RESET ALL OK?
IT MAY TAKE A WHILE
YES
CANCEL
H TRIMMING
To create a cropped copy of a picture, play the
picture back and select H TRIMMING in the
playback menu (pg. 61).
the zoom buttons to zoom in and out
1 Press
and use the selector to scroll the picture
until the desired portion is displayed (to exit
to single-frame playback without creating a
cropped copy, press DISP/BACK).
Zoom indicator
TRIMMING
If the number of pictures
affected is very large, the
display at right will appear
CANCEL
in the monitor while the
operation is in progress. Press DISP/BACK to exit
before the operation is complete.
Caution
Protected pictures will be deleted when the memory
card or internal memory is formatted (pg. 76).
66
YES
Navigation
window shows
portion of image
currently displayed
in monitor
CANCEL
Tip: Intelligent Face Detection
If the picture was shot
with Intelligent Face
Detection (pg. 21), B will
be displayed in the monitor.
Press the Y button to
zoom in on the selected face.
TRIMMING
TRIMMING
YES
CANCEL
The Playback Menu
Press MENU/OK. A confirmation
2 dialog
will be displayed.
REC OK?
Copy size (o, n, m,
or p; see page 58) is
shown at the top; if the
size is p, OK is
REC
CANCEL
displayed in yellow.
Larger crops produce larger copies; all copies
have an aspect ratio of 4 : 3.
MENU/OK to save the cropped
3 Press
copy to a separate file.
Note
Pictures taken with other cameras can not be
cropped.
F COPY
Copy pictures between internal memory and a
memory card.
the selector up or down
1 Press
to highlight d INTERNAL
MEMORY g x CARD (copy
pictures from internal memory
to the memory card) or x CARD g
d INTERNAL MEMORY (copy pictures from
a memory card to internal memory).
the selector right to display
2 Press
options for the highlighted item.
COPY
INTERNAL MEMORY
CARD
FRAME
INTERNAL MEMORY
ALL FRAMES
YES
CANCEL
Menus
the selector up or down to
3 Press
highlight FRAME or ALL FRAMES.
4 Press MENU/OK.
67
The Playback Menu
■ FRAME
Copy selected frames.
COPY OK?
YES
the selector left or right to
1 Press
display the desired picture.
2 Press MENU/OK to copy the picture.
steps 1–2 to copy
3 Repeat
additional images. Press DISP/BACK
to exit when the operation is
complete.
68
100-0001
CANCEL
■ ALL FRAMES
Press MENU/OK to copy all
pictures, or press DISP/BACK
to exit without copying
pictures.
COPY ALL OK?
100-0001
IT MAY TAKE
A WHILE
YES
CANCEL
Cautions
• Copying ends when the destination is full.
• DPOF print information is not copied (pg. 44).
The Playback Menu
I VOICE MEMO
To add a voice memo to a
still picture, select
I VOICE MEMO after
displaying the picture in
playback mode.
REC STANDBY
30s
MENU/OK to start recording.
1 Press
Hold the camera at a distance of
about 20 cm (8 in.) and face the
microphone.
START
CANCEL
Note
Voice memos can not be added to movies or
protected pictures. Remove protection from pictures
before recording voice memos (pg. 65).
Microphone
RECORDING
28s
Time remaining
Blinks red
REC
RE-REC
MENU/OK again to end
2 Press
recording. Recording ends
automatically after 30 seconds.
FINISH
REC
RE-REC
Menus
Notes
• If a voice memo already exists for the current picture, the options at right will be
displayed. Select RE-REC to replace the existing memo.
• Voice memos are recorded as PCM-format WAV files (pg. 91) with a maximum size of
about 480 KB.
69
The Playback Menu
Playing Voice Memos
Voice memo playback starts automatically when a picture with a
voice memo is displayed (pg. 34; pictures with voice memos are
indicated by a h icon).
Playback repeats until another picture is displayed. To pause, press
the selector down; to end playback, press the selector up. Press the
selector left or right to view other pictures. Volume can be adjusted
in the setup menu (pg. 75).
Note
The camera may not play voice memos recorded with other devices.
15s
STOP
PAUSE
Progress is shown
in the monitor.
Progress bar
Caution
Do not cover the speaker during playback.
Speaker
70
The Setup Menu
Using the Setup Menu
the setup menu.
1 Display
1.1 Press MENU/OK to display the
menu for the current mode.
1.2 Press the selector up or down
to highlight j SET-UP.
1.3 Press the selector right to
display the setup menu.
LCD POWER SAVE
to highlight a menu item.
3.2 Press the selector right
to display options for the
highlighted item.
SET-UP
FORMAT
/LANG.
AUTO POWER OFF
TIME DIFFERENCE
VIDEO SYSTEM
SET-UP
IMAGE DISP.
FRAME NO.
ILLUMINATION
DIGITAL ZOOM
settings.
3 Adjust
3.1 Press the selector up or down
1.5 SEC
CONT.
ON
OFF
ON
to choose a page.
3.3 Press the selector up or down
to highlight an option.
3.4 Press MENU/OK to select the
highlighted option.
Menus
a page.
2 Choose
2.1 Press the selector left or right
5 MIN
ENGLISH
2 MIN
2 MIN
OFF
2.2 Press the selector down to
enter the menu.
71
The Setup Menu
Setup Menu Options
Menu item
a IMAGE DISP.
b FRAME NO.
k ILLUMINATION
c DIGITAL ZOOM
h LCD POWER SAVE
e DATE/TIME
f VOLUME
K j SOUND
l BLOG IMAGE SIZE
g LCD BRIGHTNESS
m FORMAT
n
L o AUTO POWER OFF
p TIME DIFFERENCE
r VIDEO SYSTEM
a
M s RESET
72
Description
Options
Default
Choose how long pictures are displayed after shooting (pg.
3 SEC / 1.5 SEC /
1.5 SEC
73).
ZOOM (CONTINUOUS)
Choose how files are named (pg. 74).
CONT. / RENEW
CONT.
Turn the shooting indicator on or off (pg. 74).
ON / OFF
ON
Enable or disable digital zoom (pg. 75).
ON / OFF
OFF
Enable or disable monitor power saving (pg. 75)
ON / OFF
ON
Set the camera clock (pg. 14).
—
—
Adjust volume for the shutter, controls, and playback (pg. 75).
—
—
Choose shutter, start-up, and control sounds (pg. 76).
—
—
Choose blog image size (pg. 62).
t STANDARD /s SMALL t
Control the brightness of the monitor (pg. 76).
–5 – +5
0
Format internal memory or memory cards (pg. 76).
—
—
Choose a language (pg. 14).
See page 94
ENGLISH
Choose the auto power off delay (pg. 76).
5 MIN / 2 MIN / OFF
2 MIN
k
Set the clock to local time (pg. 77).
k/j
Choose a video mode for connection to a TV (pg. 42).
NTSC / PAL
—
Reset all settings except Frame number, DATE/TIME,
TIME DIFFERENCE, and VIDEO SYSTEM to default values. A
—
—
confirmation dialog will be displayed, press the selector left
or right to highlight OK and press MENU/OK.
The Setup Menu
a IMAGE DISP.
Choose how long pictures are displayed in the monitor after shooting.
• 3 SEC: Pictures are displayed for about 3 s before being recorded.
• 1.5 SEC: Pictures are displayed for about 1.5 s before being recorded.
• ZOOM (CONTINUOUS): Pictures are displayed until the MENU/OK button is pressed. Pictures taken at
qualities larger than p can be zoomed in to check fine details (see page 35). Note that this option
is disabled in continuous mode (pg. 60). If Intelligent Face Detection is on (pg. 21), the camera will
automatically zoom in on the face used to set focus and exposure; press the selector down to cycle
through the other faces detected.
Note
The colors displayed at settings of 3 SEC and 1.5 SEC may differ from those in the final picture.
Menus
73
The Setup Menu
b FRAME NO.
New pictures are stored in image files named using a four-digit file
Frame
number assigned by adding one to the last file number used. The file
number
100-0001
100 0001
number is displayed during playback as shown at right. FRAME NO.
File
controls whether file numbering is reset to 0001 when a new memory
number
card is inserted or the current memory card or internal memory is
12 / 31 / 2050 10 : 00 AM
Directory
F4.2
1/250
formatted.
number
• CONT.: Numbering continues from the last file number used or the
first available file number, whichever is higher. Choose this option to reduce the number of pictures
with duplicate file names.
• RENEW: Numbering is reset to 0001 after formatting or when a new memory card is inserted.
Notes
• If the frame number reaches 999-9999, the shutter release will be disabled (pg. 88).
• Selecting s RESET (pg. 72) does not reset frame numbering.
• Frame numbers for pictures taken with other cameras may differ.
k ILLUMINATION
If ON is selected, the shooting indicator will light when the camera is turned on. It will also light after
a picture is taken to let the subjects know that shooting is complete.
74
The Setup Menu
c DIGITAL ZOOM
If ON is selected, pressing T at the maximum
optical zoom position will trigger digital zoom,
further magnifying the image. To cancel digital
zoom, zoom out to the minimum digital zoom
position and press W.
Zoom
indicator
Zoom indicator,
DIGITAL ZOOM off
Optical zoom
Zoom indicator,
DIGITAL ZOOM on
Optical zoom
Digital
zoom
f VOLUME
Choose the volume for the shutter, camera
controls, and playback.
• SHUTTER VOLUME/OPERATION VOL.: Choose the
volume for the shutter and camera controls, or
select OFF to turn the sound off. Press the
selector left or right to highlight an option and
press MENU/OK to select.
VOLUME
• PLAYBACK VOLUME: Press the
selector right to display
7
the menu shown at right.
Press the selector up
SET
CANCEL
or down to choose the
volume for movie and voice memo playback
and press MENU/OK to select.
Menus
Caution
Digital zoom produces lower quality images than
optical zoom.
h LCD POWER SAVE
If ON is selected, the monitor will dim to save
power if no operations are performed for several
seconds. Full brightness can be restored by
pressing the shutter button halfway. The monitor
does not dim in movie mode or during playback.
75
The Setup Menu
j SOUND
Choose the sounds used for the shutter, at start
up, and for camera controls. Press the selector
up or down to highlight an option and press
left or right to select a sound. Press MENU/OK to
select.
g LCD BRIGHTNESS
Press the selector up or
down to choose monitor
brightness and press MENU/
OK to select.
LCD BRIGHTNESS
0
SET
CANCEL
m FORMAT
Format internal memory or
FORMAT
FORMAT OK?
a memory card. If a
ERASE ALL DATA
memory card is inserted in
CANCEL
OK
the camera, x will be
SET
displayed and this option
will format the memory card. If no memory card
is inserted, d will be displayed and this option
will format internal memory. Press the selector
left to highlight OK and press MENU/OK to begin
formatting.
76
Cautions
• All data—including protected pictures—will be
deleted. Be sure important files have been copied to
a computer or other storage device.
• Do not open the battery cover during formatting.
o AUTO POWER OFF
Choose the length of time before the camera
turns off automatically when no operations
are performed. Shorter times increase battery
life; if OFF is selected, the camera must be
turned off manually. Note that regardless of
the option selected, the camera will not turn
off automatically when connected to a printer
(pg. 43) or computer (pg. 48), while recording
or viewing a movie or when a slide show is in
progress (pg. 63).
Tip: Reactivating the Camera
For shooting, close the lens cover, and then open it
fully. For playback, press the D button for a second.
The Setup Menu
p TIME DIFFERENCE
When travelling, use this option to switch the camera clock instantly from your home time zone to
the local time at your destination.
the difference between local time
1 Specify
and your home time zone.
1.1 Press the selector up or down
to highlight j LOCAL.
1.2 Press the selector right to
display the time difference.
TIME DIFFERENCE
12 / 31 / 2050
10 : 00 AM
12 / 31 / 2050
10 : 00 AM
00 : 00
SET
1.4 Press MENU/OK when settings
are complete.
between local time and your
2 Switch
home time zone.
To set the camera clock to local time,
highlight j LOCAL and press MENU/OK.
To set the clock to the time in your home
time zone, select k HOME. If j LOCAL
is selected, j will be displayed in the
monitor for three seconds after the camera
enters shooting mode, and the date will be
displayed in yellow.
CANCEL
12 / 31 / 2050
10 : 00 AM
Menus
1.3 Press the selector left or right
to highlight +, –, hours, or
minutes; press up or down
to edit. The minimum
increment is 15 minutes.
After changing time zones, check that the
date and time are correct.
77
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
■ Computer Related
■ Audio/Visual
TV (available from
third-party suppliers)
USB
Audio/visual
output
Computer (available from
third-party suppliers)
■ Printing
USB
Technical Notes
78
PictBridge-compatible printer
(available from third-party
suppliers)
SD/SDHC
memory card
Printer (available
from third-party
suppliers)
SD card slot or card reader
Optional Accessories
Accessories from Fujifilm
The following optional accessories are available from FUJIFILM. For the latest information on the accessories
available in your region, check with your local FUJIFILM representative or visit http://www. fujifilm.com/products/
digital_cameras/index.html.
Rechargeable
Li-ion battery
NP-45 (supplied)
Additional NP-45 slimline batteries can be purchased
as required.
A/V cable
AV-C1
Connects the camera and a TV.
Technical Notes
79
Troubleshooting
Power and Battery
Problem
The camera
does not turn
on.
Power
supply
The battery
runs down
quickly.
The camera
turns off
suddenly.
Troubleshooting
80
Possible cause
Solution
Page
Charge the battery or insert a fully-charged
The battery is exhausted.
4, 6
spare battery.
The battery is not in the correct orientation. Re-insert the battery in the correct orientation. 4
Warm the battery by placing it in a pocket
The battery is cold.
or other warm place and re-insert it in the
4
camera immediately before taking a picture.
There is dirt on the battery terminals.
Clean the terminals with a soft, dry cloth.
—
Choose a different shooting mode.
30
The camera is in G mode.
The battery has reached the end of its
The battery has been charged many times.
—
charging life. Purchase a new battery.
The battery is exhausted.
Charge the battery or insert a fully-charged
spare battery.
The battery is not correctly inserted.
Re-insert the battery in the camera.
The battery is not in the correct orientation. Re-insert the battery in the correct orientation.
There is dirt on the battery terminals.
Clean the terminals with a soft, dry cloth.
Charging does
The battery has reached the end of its
Battery
not start.
charging life. Purchase a new battery. If
charger
The battery has been charged many times.
the battery still fails to charge, contact your
FUJIFILM dealer.
The camera is on.
Close the lens cover to turn off the camera.
Charging is slow. The temperature is low.
Charge the battery at room temperature.
4, 6
4
4
—
—
13
7
Troubleshooting
Menus and Displays
Problem
Menus and displays are
not in English.
Possible cause
English is not selected for the w
option in the setup menu.
Solution
Select ENGLISH.
Page
14
Shooting
Problem
Taking
pictures
No picture is
taken when
the shutter
button is
pressed.
Possible cause
Memory is full.
Memory is not formatted.
There is dirt on the memory card contacts.
The memory card is damaged.
The battery is exhausted.
The monitor may darken while the flash
charges. Wait for the flash to charge.
Select macro mode.
Cancel macro mode.
Use focus lock.
Choose a different shooting mode.
Page
8, 38
76
—
8
4, 6
13, 76
26
25
23
30
Troubleshooting
The camera has turned off automatically.
The monitor
goes dark after The flash has fired.
shooting.
The subject is close to the camera.
The camera
Focus
The subject is far away from the camera.
does not focus.
The subject is not suited to autofocus.
Macro mode is The camera is in a shooting mode which
Close-ups
not available. makes macro (close-up) mode unavailable.
Solution
Insert a new memory card or delete pictures.
Format the memory card or internal memory.
Clean the contacts with a soft, dry cloth.
Insert a new memory card.
Charge the battery or insert a fully-charged
spare battery.
Turn the camera on.
81
Troubleshooting
Problem
Possible cause
Solution
The camera is in a shooting mode
Face detection
which makes Intelligent Face Detection
Choose a different shooting mode.
not available.
unavailable.
The subject’s face is obscured sunglasses, a
Remove the obstructions.
hat, long hair, or other objects.
Change the composition so that the
The subject’s face occupies only a small
Intelligent
subject’s face occupies a larger area of the
No face is
area of the frame.
Face
frame.
detected.
Detection
The subject’s head is tilted or horizontal.
Ask the subject to hold their head straight.
The camera is tilted.
Hold the camera straight.
The subject’s face is poorly lit.
Shoot in bright light.
Recompose the picture or turn face
Wrong subject The selected subject is closer to the center
detection off and frame the picture using
selected.
of the frame than the main subject.
focus lock.
The camera is in a shooting mode in which
Choose a different shooting mode.
the flash does not fire.
Charge the battery or insert a fully-charged
The flash does The battery is exhausted.
spare battery.
not fire.
The camera is in continuous mode.
Select OFF for c CONTINUOUS.
The camera is in silent mode.
Turn silent mode off.
Flash
The flash is off (W).
Choose a different flash mode.
The camera is in a shooting mode which
Some flash
Choose a different shooting mode.
modes are not makes some flash modes unavailable.
available.
The camera is in silent mode.
Turn silent mode off.
The flash does The subject is not in range of the flash.
Position the subject in range of the flash.
not fully light
The flash window is obstructed.
Hold the camera correctly.
the subject.
82
Page
30
21
17
—
21, 23
30
4, 6
60
27
26
30
27
94
17
Troubleshooting
Problem
Problem
images
Pictures are
blurred.
Pictures are
mottled.
Possible cause
The lens is dirty.
The lens is blocked.
R is displayed during shooting and the
focus frame is displayed in red.
0 is displayed during shooting.
The ambient temperature is high and the
subject is poorly lit.
Solution
Clean the lens.
Keep objects away from the lens.
Page
97
17
Check focus before shooting.
23, 87
Use the flash or a tripod.
This is normal and does not indicate a
malfunction. Choose a lower sensitivity.
26
59
Troubleshooting
83
Troubleshooting
Playback
Problem
Pictures are
grainy.
Pictures
Audio
Possible cause
Solution
The pictures were taken with a different
—
make or model of camera.
The pictures were taken at an image size
Playback zoom
of p, saved as v Blog Images, or with a
—
unavailable.
different make or model of camera.
No sound in
Playback volume is too low.
Adjust playback volume.
voice memo
The microphone was obstructed.
Hold the camera correctly during recording.
and movie
The speaker is obstructed.
Hold the camera correctly during playback.
playback.
Selected
Deletion pictures are
not deleted.
File
numbering is
Frame no.
unexpectedly
reset.
84
Some of the pictures selected for deletion Remove protection using the device with
are protected.
which it was originally applied.
The battery-chamber cover was opened
while the camera was on.
Turn the camera off before opening the
battery-chamber cover to replace the battery
or insert a memory card.
Page
—
—
75
40, 69
41, 70
65
74
Troubleshooting
Connections
Problem
Solution
Connect the camera correctly.
Connect the camera once movie playback
has ended.
Set input to “VIDEO”.
Match the camera r VIDEO SYSTEM
setting to the TV.
Adjust the volume.
Match the camera r VIDEO SYSTEM
setting to the TV.
Connect the camera correctly.
Page
42
41, 42
—
41, 71
—
41, 71
53
Check that the battery is inserted or charge
the battery.
4, 6
Connect the camera correctly.
Turn the printer on.
43
—
—
—
Troubleshooting
Possible cause
The camera is not properly connected.
The supplied A/V cable was connected
during movie playback.
No picture or
Input on the television is set to “TV”.
sound.
TV
The camera is not set to the correct video
standard.
The volume on the television is too low.
The camera is not set to the correct video
No color.
standard.
The computer The camera is not properly connected.
does not
Computer
recognize the The battery is not inserted.
camera.
The camera is not properly connected.
Pictures can
not be printed. The printer is off.
Only one copy
PictBridge
is printed.
The printer is not PictBridge-compatible.
The date is not
printed.
85
Troubleshooting
Miscellaneous
Problem
Possible cause
Nothing happens when Temporary camera malfunction.
the shutter button is
The battery is exhausted.
pressed.
The camera does not
function as expected.
Temporary camera malfunction.
The camera accidentally The memory card has been inserted or
turns off.
pulled out.
No sound.
The camera is in silent mode.
86
Solution
Remove and reinsert the battery.
Charge the battery or insert a fully-charged
spare battery.
Remove and reinsert the battery. If the
problem persists, contact your FUJIFILM
dealer.
Insert the memory card, close the batterychamber cover, and then turn on the camera.
Turn silent mode off.
Page
4
4, 6
4
9
27
Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
O (red)
N (blinks red)
0
Troubleshooting
Description
Solution
Low battery.
Charge the battery or insert a fully-charged spare
battery.
Battery exhausted.
Slow shutter speed. Picture may be blurred. Use the flash or mount the camera on a tripod.
• Use focus lock to focus on another subject at the
R
same distance, then recompose the picture (pg. 23).
(displayed in red with The camera can not focus.
• If the subject is poorly lit, try focusing at a distance
red focus frame)
of about 2 m (6 ft. 7 in.).
• Use macro mode to focus when taking close-ups.
The subject is too bright or too dark. The
Aperture or shutter
If the subject is dark, use the flash.
speed displayed in red picture will be over- or under-exposed.
PRESS THE SHUTTER BUTTON
TO GO BACK TO SHOOTING MODE
To exit to shooting mode, press the shutter button.
D button pressed while lens cover is open.
CLOSE THE LENS COVER
Close the lens cover to turn the camera off.
TO TURN OFF THE CAMERA
Turn the camera off and then on again, taking care
FOCUS ERROR
Camera malfunction.
not to touch the lens. If the message persists, contact
ZOOM ERROR
a FUJIFILM dealer.
No memory card inserted when COPY is
NO CARD
Insert a memory card.
selected in the playback menu.
The memory card or internal memory is not
Format the memory card or internal memory (pg. 76).
formatted.
Clean the contacts with a soft, dry cloth. If the
CARD NOT INITIALIZED
The memory card contacts require
message is repeated, format the memory card (pg.
cleaning.
76). If the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer.
PROTECTED CARD
The memory card is locked.
Unlock the memory card (pg. 8).
BUSY
The memory card is incorrectly formatted. Use the camera to format the memory card (pg. 76).
87
Warning Messages and Displays
Warning
CARD ERROR
d MEMORY FULL
x MEMORY FULL
INTERNAL MEMORY IS FULL
INSERT A NEW CARD
Description
The memory card is not formatted for use
in the camera.
READ ERROR
FRAME NO. FULL
88
Format the memory card (pg. 76).
Clean the contacts with a soft, dry cloth. If the
The memory card contacts require cleaning
message is repeated, format the memory card (pg.
or the memory card is damaged.
76). If the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer.
The memory card or internal memory is full; Delete pictures or insert a memory card with more
pictures can not be recorded or copied.
free space.
Memory card error or connection error.
WRITE ERROR
Solution
Re-insert the memory card or turn the camera off
and then on again. If the message persists, contact a
FUJIFILM dealer.
Delete pictures or insert a memory card with more
free space.
Not enough memory remaining to record
additional pictures.
The memory card or internal memory is not
Format the memory card or internal memory (pg. 76).
formatted.
The file is corrupt or was not created with
The file can not be played back.
the camera.
Clean the contacts with a soft, dry cloth. If the
The memory card contacts require
message is repeated, format the memory card (pg.
cleaning.
76). If the message persists, replace the memory
card.
Camera malfunction.
Contact a FUJIFILM dealer.
Format the memory card and select RENEW for the
b FRAME NO. option in the j SETUP menu. Take
The camera has run out of frame numbers
a picture to reset frame numbering to 100-0001,
(current frame number is 999-9999).
then return to the b FRAME NO. menu and select
CONT.
Warning Messages and Displays
Warning
TOO MANY FRAMES
PROTECTED FRAME
5 ERROR
d NO IMAGE
x NO IMAGE
p CAN NOT TRIM
CAN NOT TRIM
v CAN NOT TRIM
DPOF FILE ERROR
COMMUNICATION ERROR
Solution
Choose a different date.
Remove protection before deleting, rotating, or
adding voice memos to pictures.
The voice memo can not be played back.
Contact a FUJIFILM dealer.
Select a different source.
These pictures can not be cropped.
Copy the pictures to internal memory and create a
new print order.
—
—
—
—
Troubleshooting
CAN NOT SET DPOF
A CAN NOT SET DPOF
CAN NOT ROTATE
A CAN NOT ROTATE
A CAN NOT EXECUTE
e CAN NOT EXECUTE
6 CAN NOT EXECUTE
v CAN NOT EXECUTE
PRESS AND HOLD
THE DISP BUTTON TO
DEACTIVATE SILENT MODE
Description
Date for which more than 4,999 pictures
exist selected in sort-by-date view.
An attempt was made to delete, rotate, or
add a voice memo to a protected picture.
Voice memo file is corrupt.
Camera malfunction.
The source device selected in the playback
COPY menu contains no pictures.
An attempt was made to crop a p picture.
The picture selected for cropping is damaged
or was not created with the camera.
An attempt was made to crop a blog image.
The DPOF print order on the current memory
card contains more than 999 images.
The picture can not be printed using DPOF.
Movies can not be printed using DPOF.
Pictures and movies created with other
devices can not be rotated.
TRIMMING FOR BLOG can not be used with
movies, pictures created with other devices,
pictures that can not be viewed, or pictures
created using TRIMMING FOR BLOG.
An attempt was made to choose a flash
mode or adjust the volume with the
camera in silent mode.
A connection error occurred while pictures
were being printed or copied to a computer
or other device.
Exit silent mode before choosing a flash mode or
adjusting the volume.
Confirm that the device is turned on. If the device
is connected via USB, check that the cable is
connected.
89
Warning Messages and Displays
Warning
Description
PRINTER ERROR
PRINTER ERROR
RESUME?
CAN NOT BE PRINTED
90
Printer out of paper or ink, or other printer
error.
An attempt was made to print a movie, a
picture not created with the camera, or a
picture in a format not supported by the
printer.
Solution
Check printer (see printer manual for details). To
resume printing, turn the printer off and then turn it
back on.
Check printer (see printer manual for details). If printing
does not resume automatically, press MENU/OK to
resume.
Movies and some pictures created with other devices
can not be printed. If the picture was created with
the camera, check the printer manual to confirm
that the printer supports the JFIF-JPEG or Exif-JPEG
format. If it does not, the pictures can not be printed.
Glossary
Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details
visible using optical zoom are simply enlarged, producing a slightly “grainy” image.
DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders”
stored in internal memory or on a memory card. The information in the order includes the pictures to
be printed and the number of copies of each picture.
EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount
of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV
increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering
the camera can be controlled by adjusting aperture and shutter speed.
Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction
during printing.
JPEG (Joint Photographic Experts Group): A compressed file format for color images. The higher the compression
rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.
Smear: A phenomenon specific to CCDs which causes white streaks to appear when very bright light sources,
such as the sun or reflected sunlight, appear in the frame.
WAV (Waveform Audio Format): A standard Windows audio file format. WAV files have the extension “*.WAV” and
may be compressed or uncompressed. The camera uses uncompressed WAV. WAV files can be played using
Windows Media Player or QuickTime 3.0 or later.
Appendix
White balance: The human brain automatically adapts to changes in the color of light, with the result that objects
that appear white under one light source still appear white when the color of the light source changes. Digital
cameras can mimic this adjustment by processing images according to the color of the light source. This
process is known as “white balance”.
91
Internal Memory/Memory Card Capacity
The following table shows the recording time or number of pictures available at different image qualities. All
figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files
that can be stored. The number of exposures or length remaining may not diminish at an even rate.
SD card
f IMAGE QUALITY
0 MOVIE QUALITY
o
n
m
p
rF rN
! (30 fps) 9 (30 fps)
g3:2
Image size (pixels)
3648 × 2736
3648 × 2432 2592 × 1944 2048 × 1536 1600 × 1200 640 × 480 640 × 480
320 × 240
Approx. Approx. Approx.
Approx.
Approx.
Approx.
Approx.
File size
—
—
4.8 MB 2.5 MB
2.2 MB
1.3 MB
980 KB
720 KB
200 KB
Internal memory
3
7
8
15
21
28
125
35 sec.
41 sec.
(approx. 18 MB)
512 MB
95
180
210
350
480
640
2,200
6 min.
14 min.
1 GB
190
380
420
700
960
1,280
4,420
12 min.
28 min.
2 GB
390
760
860
1,400
1,930
2,580
8,850
25 min.
57 min.
4 GB
790
1,520
1,720
2,810
3,870
5,160
17,720
50 min.
116 min.
8 GB
1,590
3,060
3,460
5,660
7,780
10,380
35,600
102 min.
223 min.
SDHC
card
• A movie recording will stop automatically when a movie file becomes approx. 2GB. If you want to continue recording, press
the shutter button again. The available recording time is displayed based on approx. 2GB.
92
Specifications
System
Model
Effective pixels
CCD
Storage media
Appendix
FinePix Z35/FinePix Z37 digital camera
10.0 million
½.3 -in., square-pixel CCD with primary color filter
• Internal memory (approx. 18 MB)
• SD/SDHC memory cards (see page 8)
File system
Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital Print Order Format
(DPOF)
File format
• Still pictures: Exif 2.2 JPEG (compressed)
• Movies: Motion JPEG AVI
• Audio: Monaural WAV
Image size (pixels)
• rF: 3,648 × 2,736
• rN: 3,648 × 2,736
• g3:2 : 3,648 × 2,432 • o : 2,592 × 1,944
• n : 2,048 × 1,536
• m : 1,600 × 1,200
• p : 640 × 480
File size
See page 92
Lens
3 × optical zoom lens, f/3.7 (wide angle) – 4.2 (telephoto)
Focal length
F=6.51 mm–18.09 mm (35-mm format equivalent: 35 mm–105 mm)
Digital zoom
Approx. 5.7 × (up to 17.1 × when combined with optical zoom)
Aperture
[Wide angle] F3.7 to F8.0 (three steps) / [Telephoto] F4.2 to F9.0 (three steps)
Focus range (distance
Approx. 60 cm (2 ft.)–infinity (wide angle/telephoto)
from front of lens)
Macro mode: approx. 8 cm–80 cm/3.1 in.–2 ft. 7 in. (wide angle); 60 cm–3 m/2 ft.–9 ft. 11 in. (telephoto)
Sensitivity
Equivalent to ISO 100, 200, 400, 800, 1600; AUTO (Standard Output Sensitivity)
Metering
256-segment through-the-lens (TTL) metering
Exposure control
Programmed autoexposure
Exposure compensation –2 EV – +2 EV in increments of 1/3 EV (M mode)
Scene modes
B (NATURAL LIGHT), C (PORTRAIT), K (LANDSCAPE), L (SPORT), D (NIGHT), U (NIGHT (TRIPOD)),
E (SUNSET), F (SNOW), G (BEACH), I (PARTY), O (FLOWER), P (TEXT)
Image Stabilization
Available
Intelligent Face Detection Available
93
Specifications
System
Shutter speed
Continuous
Focus
White balance
Self-timer
Flash
Flash modes
Monitor
Movies
Shooting options
Playback options
Other options
3 s–1/1,000 s; combined mechanical and electronic shutter
TOP 3: Up to 1 fps; max. 3 frames
• Mode: Single AF
• Autofocus system: Contrast-detect TTL AF
• Focus-area selection: AF CENTER
Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluorescent,
warm white fluorescent, cool white fluorescent, and incandescent lighting
Approx. 2 sec./10 sec.
Auto flash; effective range when sensitivity is set to AUTO is approx. 70 cm–3.1 m/2 ft. 4 in.–10 ft. 2 in.
(wide angle), 70 cm–2.7 m/2 ft. 4 in.–8 ft. 9 in. (telephoto), or 30 cm–80 cm/1 ft.–2 ft. 7 in. (macro mode)
Auto, fill flash, off, slow sync (red-eye removal off ); auto with red-eye removal, fill flash with red-eye
removal, off, slow sync with red-eye removal (red-eye removal on)
• FinePix Z35: 2.5-in., 230k-dot color LCD monitor; frame coverage approx. 97%
• FinePix Z37: 2.7-in., 230k-dot color LCD monitor; frame coverage approx. 97%
Camera can record movies with monaural sound and a frame size of 640 × 480 (!) or 320 × 240
(9) at a frame rate of 30 fps
Scene recognition, Intelligent Face Detection with red-eye removal, best framing, and frame
number memory
Intelligent Face Detection, Red-Eye Removal, micro thumbnail, multi-frame playback, sort-by-date,
trimming for blog, cropping (still pictures), slide show, image rotation, and voice memo
PictBridge, Exif Print, language selection (Japanese / English / French / German / Spanish / Italian /
Simplified Chinese / Korean / Dutch / Portuguese / Russian / Thai / Turkish / Traditional Chinese /
Czech / Hungarian / Polish / Swedish / Slovak / Danish / Norwegian / Finnish / Arabic), time difference,
silent mode
Input/output terminals
A/V OUT (audio/video output) NTSC or PAL with monaural sound
Digital input/output
USB 2.0 High Speed with MTP/PTP connection
94
Specifications
Power supply/other
Power sources
Guide to the number
of available frames for
battery operation
Camera dimensions
Camera weight
Shooting weight
Operating conditions
NP-45A rechargeable battery
Battery Type
Number of frames
NP-45A
Approx. 165 frames
According to the CIPA (Camera and Imaging Products Association) standard procedure for
measuring digital still camera battery consumption (extract):
When using a battery, use the battery supplied with the camera. The storage media should be SD
memory card.
Note that the number of shots that can be taken with a fully-charged battery varies with
temperature and shooting conditions.
89.0 mm × 57.9 mm × 23.9 mm/3.5 in. × 2.3 in. × 0.9 in. (W × H × D), excluding projections
• FinePix Z35: Approx. 115 g/4.0 oz., excluding battery, accessories, and memory cards
• FinePix Z37: Approx. 115 g/4.0 oz., excluding battery, accessories, and memory cards
• FinePix Z35: Approx. 132 g/4.6 oz., including battery and memory card
• FinePix Z37: Approx. 132 g/4.6 oz., including battery and memory card
• Temperature: 0 °C – +40 °C/+32 °F – +104 °F
• Humidity: 10%–85% (no condensation)
NP-45A rechargeable battery
Nominal voltage
DC 3.7 V
Operating temperature
0 °C – +40 °C/+32 °F – +104 °F
Dimensions (W × H × D)
31 mm × 39.4 mm × 5.7 mm/
1.2 in. × 1.6 in. × 0.2 in.
Weight
Approx. 15 g/1.0 oz.
AC power adapter
Rated input
Charging time
Operating temperature
100 – 240 V AC, 50/60 Hz
Approx. 210 minutes
(measured at +20°C (+68°F))
0 °C – +40 °C/+32 °F – +104 °F
Appendix
* The weight and dimensions vary depending on the country
or region of sale.
95
Specifications
Color Television Systems
NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in
the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in
European countries and China.
Notices
• Specifications subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this manual.
• Although the monitor is manufactured using advanced high-precision technology, small bright points and
anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and
does not indicate a malfunction; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric fields, static
electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
96
Caring for the Camera
Appendix
To ensure continued enjoyment of the product, observe the following precautions.
Storage and Use
■ Condensation
If the camera will not be used for an extended
Sudden increases in temperature, such as occur
period, remove the battery and memory card.
when entering a heated building on a cold day,
Do not store or use the camera in locations that
can cause condensation inside the camera. If
are:
this occurs, turn the camera off and wait an hour
• exposed to rain, steam, or smoke
before turning it on again. If condensation forms
• very humid or extremely dusty
on the memory card, remove the card and wait
• exposed to direct sunlight or very high
for the condensation to dissipate.
temperatures, such as in a closed vehicle on a
Cleaning
sunny day
Use a blower to remove dust from the lens and
• extremely cold
monitor, then gently wipe with a soft, dry cloth.
• subject to strong vibration
Any remaining stains can be removed by wiping
• exposed to strong magnetic fields, such as
gently with a piece of FUJIFILM lens-cleaning
near a broadcasting antenna, power line, radar
paper to which a small amount of lens-cleaning
emitter, motor, transformer, or magnet
fluid has been applied. Care should be taken to
• in contact with volatile chemicals such as
avoid scratching the lens or monitor. The camera
pesticides
body can be cleaned with a soft, dry cloth.
• next to rubber or vinyl products
Do not use alcohol, thinner, or other volatile
■ Water and Sand
chemicals.
Exposure to water and sand can also damage the
Travelling
camera and its internal circuitry and mechanisms.
Keep the camera in your carry-on baggage.
When using the camera at the beach or seaside,
Checked baggage may suffer violent shocks that
avoid exposing the camera to water or sand. Do
could damage the camera.
not place the camera on a wet surface.
97
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html