Technical data | Fujitsu D1561 Computer Hardware User Manual

2
Technisches Handbuch / Technical Manual
Mainboard D1562/D1561
Deutsch / English / Français
Sie haben ...
... technische Fragen oder Probleme?
Wenden Sie sich bitte an:
• Ihren zuständigen Vertriebspartner
• Ihre Verkaufsstelle
Aktuelle Informationen und Updates (z. B. BIOS-Update) zu unseren Mainboards finden Sie im
Internet: http://www.fujitsu-siemens.com/mainboards
Are there ...
... any technical problems or other questions you need clarified?
Please contact:
• your sales partner
• your sales outlet
The latest information and updates (e.g. BIOS update) on our mainboards can be found on the
Internet under: http://www.fujitsu-siemens.com/mainboards
Vous avez ...
...des questions techniques ou des problèmes ?
Veuillez contacter :
• Votre partenaire Commercial
• Votre point de Vente
Les dernières informations ainsi que les updates (p.ex. BIOS-Update) par rapport à nos cartes
mères sont à votre disposition sur Internet : http://www.fujitsu-siemens.com/mainboards
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
Bestell-Nr./Order No.: A26361-D1562-Z120-1-6319
Printed in the Federal Republic of Germany
AG 0503 05/03
A26361-D1562-Z120-1-6319
Mainboard D1562/D1561
TECHNISCHES HANDBUCH
TECHNICAL MANUAL
Deutsch
English
Mainboard D1562/D1561
Technisches Handbuch
Technical Manual
Ausgabe Mai 2003
May 2003 edition
Français
Intel, Pentium und Celeron sind eingetragene Warenzeichen der Intel Corporation, USA.
Microsoft, MS, MS-DOS und Windows sind eingetragene Warenzeichen der Microsoft
Corporation.
PS/2 und OS/2 Warp sind eingetragene Warenzeichen von International Business Machines,
Inc.
Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen
der jeweiligen Inhaber und werden als geschützt anerkannt.
Copyright ã Fujitsu Siemens Computers GmbH 2003
Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des
Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren.
Zuwiderhandlungen verpflichten zu Schadenersatz.
Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung.
Liefermöglichkeiten und technische Änderungen vorbehalten.
Dieses Handbuch wurde erstellt von
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA.
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.
All other trademarks referenced are trademarks or registered trademarks of their respective
owners, whose protected rights are acknowledged.
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved. Delivery subject to availability.
Right of technical modification reserved.
This manual was produced by
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Übersicht/Overview Mainboard D1562/61
1=
2=
3=
4=
Interne Anschlüsse und Steckplätze / Internal
connectors and slots
22 23
1
Channel B
Channel A
2
3
4
21
5
6
slot 4
slot 2
slot 3
slot 1
AGP / GPA
7
PCI 1
8
9
PCI 2
20
10
PCI 3
19
18
17
11
16 15 14 13
12
5=
6=
7=
8=
9=
10 =
11 =
12 =
13 =
14 =
15 =
16 =
17 =
18 =
19 =
20 =
21 =
22 =
23 =
Diskettenlaufwerk / Floppy disk drive
Power On LED II
Bedienfeld / Front panel
Stromversorgungsüberwachung /
Power supply control
IDE-Laufwerke 3/4 / IDE-drives 3/4
Stromversorgung / Power supply
IDE-Laufwerke 1/2 / IDE-drives 1/2
Serial ATA2
Batterie / Battery
Serial ATA1
Jumper / DIP-Switch
SMB
LCD-Bedienfeld / LCD front panel
Gehäuseüberwachung / Intrusion
USB E/F
USB G/H
Lüfter 2 / Fan 2
S/PDIF-Anschluss / S/PDIF
connector
Audio-Bedienfeld / Audio front panel
CD-Audio in
Zusätzliche-Stromversorgung /
additional power supply
Serial port (COM2)
Lüfter 1 / Fan 1
Optionale Komponenten / Optional
components
Externe Anschlüsse / External connectors
Bedienfeld / Front panel
Power On/Off
Sleep LED
Message LED
Power On
LED 2)
HD-LED
Reset
1
2
1)
SCSI LED Input
1) The same interface
2) 2pin or 3pin connector possible
PowerOn LED II
1
A26361-D1562-Z120-2-6319
2)
3
Umschlag/Cover
Contents
Mainboard D1562/D1561..................................................................................................................1
Notational conventions ..............................................................................................................1
Important notes..................................................................................................................................2
Information about boards ...........................................................................................................2
List of features...................................................................................................................................3
Special features.........................................................................................................................4
Brief instructions on installing mainboard...........................................................................................6
Prior to installation .....................................................................................................................6
Interfaces and connectors ..............................................................................................................8
External ports ....................................................................................................................................8
LAN connector...........................................................................................................................8
Graphics port - Supported screen resolutions ............................................................................9
Internal ports and connectors ............................................................................................................9
Hard disk connection .................................................................................................................9
Audio front panel........................................................................................................................9
Pin assignment of internal ports.......................................................................................................10
Settings with switches and jumpers ............................................................................................17
Add-on modules / Upgrading........................................................................................................18
Replacing processor ........................................................................................................................18
Removing and installing processors ........................................................................................18
Upgrading main memory..................................................................................................................20
Upgrading AGP screen controllers...................................................................................................22
Adding PCI cards.............................................................................................................................22
PCI bus interrupts - Selecting correct PCI slot .........................................................................22
Replacing the lithium battery....................................................................................................24
BIOS update....................................................................................................................................25
BIOS Recovery - Recovering System BIOS ....................................................................................25
Microcode Update ...........................................................................................................................26
Drivers .............................................................................................................................................27
Annex .............................................................................................................................................28
Electrical Properties.........................................................................................................................28
APM and ACPI system status, energy-saving modes......................................................................29
Mainboard Revision and BIOS Version............................................................................................30
Error messages .............................................................................................................................31
Glossary ..........................................................................................................................................35
A26361-D1562-Z120-2-6319
Mainboard D1562/D1561
Your mainboard is available in different configuration levels. Depending on the configuration chosen,
some of the hardware components described may not be available on your mainboard.
Additional information
Information on the BIOS Setup and additional descriptions of the drivers are contained:
•
•
•
in the readme files on your hard disk
on the driver floppy disks included
on the CD "Drivers & Utilities Collection" or "Drivers & Utilities" or "ServerStart".
i
The programme Acrobat Reader must be installed to be able to open the manuals. You will
find the programme on the CD-ROM directory: utls/acrobat.
For more details please read the according readme.txt files.
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
!
i
indicates information which is important for your health or for preventing physical
damage.
indicates additional information which is required to use the system properly.
Ê
Text which follows this symbol describes activities that must be performed in the order shown.
Ë
This symbol indicates that you must enter a blank space (press the Space Bar) at this point.
Ú
This symbol indicates that you must press the Enter key.
Text in this typeface indicates screen outputs.
Text in this bold typeface indicates the entries you make via the keyboard.
Text in italics indicates commands or menu items.
"Quotation marks" indicate names of chapters or terms.
A26361-D1562-Z120-2-6319
English - 1
Important notes
Important notes
With the mainboard installed you must open the system to access the mainboard. How to dismantle
and reassemble the system is described in the operating manual accompanying the system.
Connecting cables for peripherals must be adequately shielded to avoid interference.
!
Observe the safety notes in the operating manual of your system.
Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore
essential to observe the instructions in the "Add-on modules / Upgrading" - "Replacing
the lithium battery" section.
Components can become very hot during operation. Ensure you do not touch
components when making extensions to the mainboard. There is a danger of burns!
The shipped version of this board complies with the requirements of the EEC directive
89/336/EEC "Electromagnetic compatibility".
Compliance was tested in a typical PC configuration.
When installing the board, refer to the specific installation information in the manual for
the receiving device.
i
The warranty is invalidated if the system is damaged during the installation or
replacement of expansions. Information on which expansions you can use is available
from your sales outlet or the customer service centre.
Information about boards
To prevent damage to the mainboard, the components and conductors on it, please take great care
when you insert or remove boards. Take great care to ensure that extension boards are slotted in
straight, without damaging components or conductors on the mainboard, or any other components,
for example EMI spring contacts.
Remove the plug from the mains outlet so that system and mainboard are totally disconnected from
the mains voltage.
Be careful with the locking mechanisms (catches, centring pins etc.) when you replace the
mainboard or components on it, for example memory modules or processors.
Never use sharp objects (screwdrivers) for leverage.
Boards with electrostatic sensitive devices (ESD) are identifiable by the label shown.
When you handle boards fitted with ESDs, you must, under all circumstances,
observe the following:
•
•
•
•
•
2 - English
You must always discharge static build up (e.g. by touching a grounded object)
before working.
The equipment and tools you use must be free of static charges.
Remove the power plug from the mains supply before inserting or removing
boards containing ESDs.
Always hold boards with ESDs by their edges.
Never touch pins or conductors on boards fitted with ESDs.
A26361-D1562-Z120-2-6319
List of features
List of features
Onboard features
Chipset
Board size
VGA
Audio / 6-channel / S/PDIF 5.1
D1562-A
D1561-A
Intel 865 G
Intel 865 G
µATX
µATX
ü
ü
ü/-/ü
ü/-/ü
-/ü
-/ü
ü/ü/-/ü
ü/-/-/-
RAID
-
-
FireWireTM
-
-
HI-SPEED USB 2.0
ü
ü
Buzzer / int. Speaker Support
LAN / Gigabit LAN / with Alert-on-LAN /
Alert Standard Format
ü/-
-/-
Temperature monitoring (SilentFan)
ü
-
System Monitoring
ü
-
Fujitsu Siemens Computers Keyboard
Power Button Support
ü
ü
4
4
SmartCard SystemLock (USB / serial)
Internal ports
DIMM slots (DDR 400/333/266 SDRAM)
AGP Slot (8x, 32 bit, 66 MHz, 1.5 V)
1
1
PCI slot (32 bit, 33 MHz, 5 V and 3.3 V)
3
3
CNR Slot (Type A, AC‘97 only)
-
-
Serial ATA interface (150 Mbyte/s)
2
2
ATA Interface (Ultra DMA/100)
2
2
Floppy Interface (up to 2.88 Mbyte)
1
1
S/PDIF 5.1 (digital audio)*
1
1
CD audio input
1
1
AUX audio input
-
-
Front panel Audio (headphone,
microphone)
1
1
Wake On LAN
-
-
IEEE 1394 connector* (FireWireTM)
-
-
USB Ports* (2.0, ~480 MB/s)
4
4
Serial Ports* (FIFO, 16550 compatible)
1
1
Fan Connectors PSU** / CPU / AUX1 /
AUX2
1 / 1 /1 / -
1 / 1 /1 / -
A26361-D1562-Z120-2-6319
English - 3
List of features
Internal ports (continued)
D1562-A
D1561-A
SMBus Connector* (Case Temperature)
1
-
Intrusion Connector* (Case Open)
1
-
1/1/-
1/1/-
D1562-A
D1561-A
Power Connectors ATX / ATX12V / AGP
PRO
External ports
VGA
Audio Line in / Line out / Mic In
Game/MIDI
LAN (RJ-45)
PS/2 mouse/keyboard
1
1
1/1/1
1/1/1
-
-
1
1
1/1
1/1
1394 port (FireWireTM)
-
-
USB Ports (2.0, ~480 MB/s)
4
4
Serial Ports (FIFO, 16550 compatible)
1
1
Parallel Port (EPP/ECP)
1
1
*
**
for use with internal devices or optional Front or Rear panel
not supported by standard power supplies
Special features
Your mainboard is available in different configuration levels. Depending on the configuration, your
mainboard is equipped with or supports the features described in the following.
Thermal Management and System Monitoring
A microcontroller developed by Fujitsu Siemens Computers reliably protects your PC
against damage caused by overheating. Overheating can lead to the data loss or
processor damage. An ingenious fan control and monitoring system prevents
unnecessary noise. Should the processor nevertheless become too hot at the
maximum fan speed, then the processor clock rate will automatically be reduced so
that the system continues to run stably. In addition, the microcontroller offers
monitoring of, for example, system voltages (12 V, 5 V, CMOS), opening of the case
and a watchdog function.
The microcontroller operates independently of the operating system and the
processor. All values are displayed with DeskView, DeskViewOEM or SystemGuard.
Harddisk Password and Harddisk Silent Mode
You can reduce the noise resulting when the hard disk is accessed to a barely
perceptible level. The resulting power decrease is approx. 10-20% depending on the
hard disk.
A password assignment for the hard disk is only possible with suitable, newer hard
disks and prevents unauthorised access to the stored data.
4 - English
A26361-D1562-Z120-2-6319
List of features
Silent Mode and Harddisk Password are activated in the BIOS Setup. Additional
information is contained in the "BIOS Setup" manual.
Logo Boot
A customer-specific logo can be displayed during system booting. The logo is loaded
using the LogoFlash tool. The logo can have a size of 640 x 480 pixels with 16
colours. The tool is provided on the CD "Drivers & Utilities" or "Drivers & Utilities
enhanced" or is available on the Internet at http://www.fujitsu-siemens.com/mainboards.
DeskView / DeskViewOEM
The network-capable manageability software DeskView/DeskViewOEM* mainly
consists of three modules:
•
•
•
DeskInfo shows the most important device data of the PCs in a network (local
and/or on an administrator PC).
DeskAlert monitors the operability of all major components and triggers alarms if
necessary depending on the mainboard variant.
DeskFlash carries out a BIOS update under Windows.
Recovery BIOS
If an error occurs during a BIOS update (e.g. due to a power failure), the system BIOS
will be destroyed. All Fujitsu Siemens Computers mainboards are equipped with a
recovery BIOS. With it a destroyed BIOS can easily be restored. Exact instructions
are provided in the chapter "BIOS Recovery - Recovering System BIOS".
IA-PC
Instantly Available PC ensures fast availability of the PC from an energy-saving mode.
Within just a few seconds the PC is in exactly the same state it was in when it was
switched off without time-consuming booting. Depending on the operating system, the
PC can be switched into an energy-saving mode with applications open by pressing
the ON/OFF switch.
A26361-D1562-Z120-2-6319
English - 5
Brief instructions on installing mainboard
If you have purchased a separate mainboard, you can install the mainboard in your system in
accordance with the following brief instructions.
The activities described here assume a basic knowledge of PCs and cannot be carried out by a
layperson. If you are not sure whether you have the necessary specialised knowledge, then leave
this work to an expert.
The illustrations of the system show examples of possible cases.
Prior to installation
Ê
Ê
Please take note of the safety information in the "Important notes" chapter.
Check whether the processor, memory modules and power supply are suitable for this
mainboard:
−
processor (see "Replacing processor" chapter).
−
memory modules (see "Upgrading main memory" chapter).
−
power supply (see "Electrical Properties" chapter).
Ê
Make sure the current requirement of the fans (processor, case) does not exceed the
loadability of the fan connections (see chapter entitled "Electrical Properties").
Ê
First only install the components absolutely necessary (graphics card, processor and heat sink,
one memory module) and only connect the required connections (power supply unit, case
connections such as ATX on/off switch, hard disk or floppy disk drive). You should not install
additional cards and devices until this minimum configuration successfully boots (see chapter
entitled "Add-on modules / Upgrading").
Installation
Ê
Equip the mainboard with the processor, heat sink and memory modules before installation if
possible. Further information can be found in "Replacing processor" chapter.
Ê
A26361-D1562-Z120-2-6319
Open the casing as described in the
operating manual.
English - 6
Brief instructions on installing mainboard
Ê
Should no suitable connection field be
provided in the case, then you must
install the connection field (1) provided.
Ensure the plate is aligned properly so that
the connections are suitable for the
mainboard later.
Ê
Set the mainboard on the edge on
which the connection field is located (2)
and then insert the board in the
case (3).
Make sure that spacers in the housing are
only mounted at points at which there are
mounting holes in the mainboard.
Ê
Ê
Fasten the mainboard with the screws.
Connect the plugs for the power supply, control panel and drives to the corresponding
connections on the mainboard.
Driver installation
Ê
Install the drivers for the chipset. You may find the driver on the "Drivers & Utilities" CD. Please
refer to chapter "Drivers" for a description of installing drivers.
A26361-D1562-Z120-2-6319
English - 7
Interfaces and connectors
The positions of the interfaces and connectors are shown on page "Cover".
The components and connectors marked are not necessarily present on the mainboard.
External ports
The positions of the external ports are shown on page "Cover".
Audio input (Line in), light blue
PS/2 keyboard port, purple
PS/2 mouse port, green
Serial interface, turquoise
Parallel port/Printer, burgundy
Monitor port, blue
LAN
LAN connector (optional)
USB - Universal Serial Bus, black
Audio output (Line out), light green
Microphone jack (mono), pink
LAN connector
The mainboard has an optional Intel 82562EZ/82547EI LAN controller. This LAN controller supports
the transfer rates of 10 Mbit/s, 100 Mbit/s and the LAN controller 82547EI additionally supports
1000 Mbit/s. The LAN controller is equipped with a 2 KB transmission and receiving buffer (FIFO)
and supports WOL function through Magic Packetä. The LAN controller 82547EI supports also
Basic Alert-on-LAN II and Alert Standard Format (ASF). The LAN RJ45 connector has two LEDs
(light emitting diodes).
2
1
LED 1 lights green - a connection exists (e.g. to a hub). LED is blinking green: activity
LED 2 lights differently with the two possible LAN controllers:
Link Mode: the LAN connection is active.
10 Mbit/s
100 Mbit/s
1000 Mbit/s
8 - English
82562EZ
82547EI
off
yellow
-
off
green
yellow
WOL mode:
received.
10 Mbit/s
100 Mbit/s
-
a Magic PacketTM is being
82562EZ
82547EI
off
yellow
-
off
yellow
-
A26361-D1562-Z120-2-6319
Internal ports and connectors
Graphics port - Supported screen resolutions
Depending on the operating system used, the screen resolutions in the following table refer to the
mainboard screen controller.
If you are using an external screen controller, you will find details of supported screen resolutions in
the operating manual or technical manual supplied with the controller.
Screen resolution
640 x 480
800 x 600
1024 x 768
1280 x 1024
1600 x 1200
1920 x 1440
2048 x 1536
Refresh rate (Hz)
120
120
100
100
100
75
60
Colour
32 bit
32 bit
32 bit
32 bit
16 bit
16 bit
16 bit
Features
2D+overlay
2D+overlay
2D+overlay
2D
2D
2D
2D
Internal ports and connectors
The positions of the internal ports and connectors are shown on the Cover. Additional information on
some ports is also provided here.
Hard disk connection
An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for
the ultra ATA/66 or ultra ATA/100 mode.
Ê
Connect the end of the cable marked with blue to the mainboard.
A serial ATA/150 hard disk must be connected with a serial ATA cable.
Ê
Connect the cable to the hard disk and to the connector on the mainboard.
If you have connected one or two hard disks to a serial ATA (one hard disk is possible per serial
ATA connection), you must configure the respective settings in the BIOS Setup (further information
you can find in the "BIOS Setup" manual).
Audio front panel
If you want to use the internal connection for the audio front panel for the front side of the system,
then proceed as follows:
Ê Remove all plug-in jumpers from the audio front panel connection.
Ê
Connect the cable for the audio front panel.
i
If you connect audio devices on both the front and the back of the system, you can only
use the connections Line out and Microphone once each.
If you have connected audio devices to both Line out connections, only the connection on
the front of the system is active.
If you have connected audio devices to both Microphone connections, only the
connection on the back of the system is active.
A26361-D1562-Z120-2-6319
English - 9
Pin assignment of internal ports
Pin assignment of internal ports
The pin assignment of some internal connections is shown in English in the following.
i
Some of the following connectors may be optional!
Power On/Off
Front panel
Watch the poling of the LEDs. The positive pole
of the connection cables is often indicated with a
coloured wire.
Reset
Sleep LED
Message LED
Power On
2)
HD-LED
LED
1
2
1)
SCSI LED Input
1) The same interface
2) 2pin or 3pin connector possible
Connection
Reset
Power On/Off
HD LED
SCSI Activity
Input
Message LED
Power On LED
Speaker
Sleep LED
Note
Attention: Do not connect to the LED connections of an SCSI controller! This
connection is intended for a cable with a 4-pin connector. An SCSI controller
reports activity (low-active) via this cable.
Indicates the system state APM or ACPI together with the Sleep LED (see
chapter entitled "APM and ACPI system status, energy-saving modes").
0,5 W at 8 Ohm
Indicates the system state APM or ACPI together with the Power-On LED (see
chapter entitled "APM and ACPI system status, energy-saving modes").
Power On LED II
1
Pin
Signal
1
2
3
Power On LED (Anode)
Power On LED (Anode)
Power On LED (Cathode)
Serial ATA (internal)
10 - English
3
1
A26361-D1562-Z120-2-6319
Pin assignment of internal ports
Pin
Signal
Pin
Signal
1
3
5
7
GND
Transmit data negative
Receive data negative
GND
2
4
6
8
Transmit data positive
GND
Receive data positive
Key
2
ATA interface
1
Pin
Signal
Pin
Signal
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
Reset drive (low asserted)
Data 7 (high asserted)
Data 6 (high asserted)
Data 5 (high asserted)
Data 4 (high asserted)
Data 3 (high asserted)
Data 2 (high asserted)
Data 1 (high asserted)
Data 0 (high asserted)
GND
DRQ (high asserted)
I/O write (low asserted)
I/O read (low asserted)
I/O ready (low asserted)
DAK (low asserted)
IRQ (high asserted)
ADR 1 (high asserted)
ADR 0 (high asserted)
CS 1 (low asserted)
IDE-LED (low asserted)
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
GND
Data 8 (high asserted)
Data 9 (high asserted)
Data 10 (high asserted)
Data 11 (high asserted)
Data 12 (high asserted)
Data 13 (high asserted)
Data 14 (high asserted)
Data 15 (high asserted)
Key
GND
GND
GND
Cable select
GND
not connected
ATA66 Detect (low asserted)
ADR 2 (high asserted)
CS 3 (low asserted)
GND
A26361-D1562-Z120-2-6319
English - 11
Pin assignment of internal ports
Audio S/PDIF
1
Pin
Signal
1
2
3
VCC
SPDIF out
GND
1
CD audio input
Pin
Signal
1
2
3
4
Left CD audio input
CD GND
CD GND
Right CD audio input
AUX audio in
1
Pin
Signal
1
2
3
4
Left AUX audio input
Analogue GND
Analogue GND
Right AUX audio input
12 - English
A26361-D1562-Z120-2-6319
Pin assignment of internal ports
1
Stromversorgungsüberwachung /
Power supply control
Pin
Signal
1
2
3
4
5
6
7
8
AC Outlet (high asserted)
PS FAN Control (low asserted)
PS FAN full on (low asserted)
PS FAN Sense
SMB CLK
SMB DATA
VCC EEPROM (+3.3V)
GND
1
Audio front panel
2
Pin
Signal
Pin
Signal
1
Micro input
2
Analogue GND
3
Micro bias
4
Analogue VCC
5
Right line output
6
Right line return
7
not connected
8
Key
9
Left line output
10
Left line return
If the audio front panel is not used, you must plug jumpers on pin pairs 5/6 and 9/10.
A26361-D1562-Z120-2-6319
English - 13
Pin assignment of internal ports
USB E/F - dual channel
1
2
11
12
(internal or external via special wire)
Pin
Signal
Pin
Signal
1
3
5
7
9
11
Key
VCC C
Data negative C
Data positive C
GND
Key
2
4
6
8
10
12
Chipcard reader on
VCC D
Data negative D
Data positive D
GND
not connected
USB
G/H - dual channel
(internal or external via special cable)
1
2
11
12
Pin
Signal
Pin
Signal
1
Key
2
Chipcard reader on
3
VCC C
4
VCC D
5
Data negative C
6
Data negative D
7
Data positive C
8
Data positive D
9
GND
10
GND
11
Key
12
not connected
14 - English
A26361-D1562-Z120-2-6319
Pin assignment of internal ports
Serial port 2
1
2
Pin
Signal
Pin
Signal
1
3
5
7
9
DCD 2
SIN 2
SOUT 2
DTR 2
GND
2
4
6
8
DSR 2
RTS2
CTS 2
RI 2
1
Fan 1
(processor fan - only for 3 pin fans)
Pin
Signal
1
2
GND
Controlled FAN voltage (0V, +6V, ... +12V, max. 1A)
or fix Fan voltage (+12 V, max. 1 A)
Fan sense
3
1
Fan 2
Pin
Signal
1
2
GND
Controlled FAN voltage (0V, +6V, ... +12V, max. 1A)
or fix Fan voltage (+12 V, max. 1 A)
Fan sense
3
A26361-D1562-Z120-2-6319
English - 15
Pin assignment of internal ports
1
Power supply ATX
11
Pin
Signal
Pin
Signal
1
2
3
4
5
6
7
8
9
10
+3.3V(P3V3P)
+3.3V(P3V3P)
GND
+5V (VCC)
GND
+5V (VCC)
GND
Powergood (high asserted)
+5V Auxiliary (VCC Aux)
+12V (P12VP)
11
12
13
14
15
16
17
18
19
20
+3.3V(P3V3P)
-12V (P12VN)
GND
PS on (low asserted)
GND
GND
GND
-5V (5PVN)
+5V (VCC)
+5V (VCC)
Additional power supply ATX12 V
3
1
Pin
Signal
Pin
Signal
1
3
GND
+12 V
2
4
GND
+12 V
16 - English
A26361-D1562-Z120-2-6319
Pin assignment of internal ports
Settings with switches and jumpers
Your mainboard is equipped with switches or jumpers. The positions of the switches or jumpers are
shown on page "Cover".
Switch 1 = Skipping system and BIOS Setup
password
Switch 2 = System BIOS recovery
Switch 3 = must be set to off
Switch 4 = must be set to off
ON
1 2 3 4
1
2
Pin pair 1 inserted =
Skipping system and BIOS Setup password
Pin pair 2 inserted =
System BIOS recovery
Any other setting =
State of supply; jumper has no function
i
The clock frequency of the processor is set automatically.
Skipping system and BIOS Setup password - switch 1 / pin pair 1
Switch 1 / pin pair 1 enables skipping the system and BIOS Setup password.
On
System and BIOS Setup password are skipped when the device is switched on and
may be changed.
Off
System and BIOS Setup password must be entered when the device is switched on.
Recovering System BIOS - switch 2 / pin pair 2
Switch 2 / pin pair 2 enables recovery of the old system BIOS after an attempt to update has failed.
To restore the old BIOS you need a Flash BIOS Diskette (see "BIOS update" chapter).
On
The System BIOS executes from floppy drive A: and the inserted "Flash-BIOSDiskette" restores the System BIOS on the mainboard.
Off
Normal operation (default setting).
Reserved - switch 3 and switch 4 (if present)
Switch 3 and 4 are reserved.
A26361-D1562-Z120-2-6319
English - 17
Add-on modules / Upgrading
!
Exit energy-saving mode, switch off the system and remove the power plug from the
mains outlet, before carrying out any of the procedures described in this chapter!
Even when you have switched off the device, parts (e.g. memory modules, AGP and PCI
extension boards) are still supplied with power.
Replacing processor
Technical data
•
•
Pentium 4 with 400/533/800 MHz Processor System Bus in the mPGA478 design.
Celeron with 400 MHz Processor System Bus in the mPGA478 design
A current list of the processors supported by this mainboard is available on the Internet at:
www.fujitsu-siemens.com/mainboards.
Removing and installing processors
Ê
Remove the fan that there may be and the heat sink.
3
2
4
5
1
A
Ê
Ê
Ê
Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).
Remove the old processor from the socket (3).
Insert the new processor in the socket so that the angled corner of the processor matches the
coding on the socket (A) with regard to the position (4).
i
Ê
The angled corner of the processor can also be at a different location than shown in the
illustration.
Push the lever back down until it clicks into place (5).
18 - English
A26361-D1562-Z120-2-6319
Replacing processor
Mounting heat sink
Be sure to use heat conducting material between the processor and the heat sink. If a heat
conducting pad (rubber-like foil) is already applied to the heat sink, then use it. Otherwise you must
apply a very thin layer of heat conducting paste.
Heat conducting pads can only be used once. If you remove the heat sink, you must clean it and
apply new heat conducting paste before you remount it.
Please note that, depending on the heat sink used, different heat sink mounts are required on the
mainboard.
i
If a counter-plate is mounted on the underside of the mainboard for reinforcement, no
heat sinks of the type "Intel Boxed" may be used. Otherwise the retaining clips of the heat
sink will be damaged.
When using an "Intel Boxed" heat sink, the mainboard must be converted. This
conversion set is either included with the mainboard or is available separately.
If no counter-plate is mounted, you can use both "Intel Boxed" heat sinks and standard
heat sinks. If you use the "Intel Boxed" heat sink, the mainboard will bend due to the high
pressure of the retaining clips. This behaviour is specified by Intel.
A26361-D1562-Z120-2-6319
Ê
Depending on the configuration variant, you
must pull a protective foil off the heat sink or
coat the heat sink with heat conducting paste
before fitting it.
Ê
Depending on the processor variant, clips
may also be supplied for mounting the heat
sink that fix it in place.
Ê
When you have mounted the optional fan,
connect the fan plug to the corresponding
connection on the mainboard.
English - 19
Upgrading main memory
Upgrading main memory
Technical data
Technology:
DDR 266, DDR 333 or DDR 400 unbuffered DIMM modules
184-Pin; 2.5 V; 64 Bit, no ECC
Size:
128 Mbytes up to 4 Gbyte DDR 266 SDRAM
128 Mbytes up to Gbyte DDR 333 SDRAM
128 Mbytes up to Gbyte DDR 400 SDRAM
Granularity:
128, 256, 512 or 1024 Mbyte for one socket
A current list of the memory modules recommended for this mainboard is available on the Internet
at: www.fujitsu-siemens.com/mainboards.
At least one memory module must be installed. Memory modules with different memory capacities
can be combined.
!
You may only use unbuffered 2,5 V memory modules. Buffered memory modules are not
supported. DDR-DIMM memory modules must meet the PC2100, PC2700 or PC3200
specification.
The mainboard has two memory channels (channel A and channel B) with two slots each
(slot 1 and 3 or slot 2 and 4).
The maximum system performance is available when identical memory modules (same
order number, same manufacturer, same size, memory density) are used in a memory
slot 1 and 2 or memory slot 3 and 4.
slot 4
Channel B
slot 3
slot 2
Channel A
slot 1
Number of inserted memory modules
slot to be used
1
2
3
4
Channel A, slot 1
X
X
X
X
X
X
X
X
X
Channel A, slot 3
Channel B, slot 2
Channel B, slot 4
X
If you use more than one memory module, then make sure to distribute the memory modules over
both memory channels (see table). By doing this you use the performance advantages of the dualchannel mode.
Memory clock pulse speed
The memory clock pulse speed is affected by the chipset and processor system bus (PSB). The
table shows the memory speed in dependence on the Processor System Bus.
System bus (MHz)
DDR400 (MHz)
DDR333 (MHz)
DDR266 (MHz)
800
400
320
266
20 - English
A26361-D1562-Z120-2-6319
Upgrading main memory
533
333
333
266
400
266
266
266
Installing a memory module
2
2
Ê
Ê
Ê
Push the holders on each side of the memory slot outwards.
Insert the memory module into the location (1).
At the same time flip the lateral holders upwards until the memory module snaps in place (2).
Removing a memory module
1
1
Ê
Ê
Push the clips on the right and left of the memory slot outward (1).
Pull the memory module out of the memory slot (2).
A26361-D1562-Z120-2-6319
English - 21
Upgrading AGP screen controllers
Upgrading AGP screen controllers
Technical data:
The AGP slot supports the modes 4x/8x with 32 bits and 66 MHz. Only 1.5 V AGP graphics cards
are supported.
i
Some older 3.3 V AGP graphics cards are coded like 1.5 V AGP graphics cards. The
installation of such 3.3 V AGP graphics cards can cause serious damage to the
mainboard and the AGP graphics cards.
Adding PCI cards
Technical data:
32 bit / 33 MHz PCI slots
5 V and 3.3 V supply voltage
3.3 V auxiliary voltage
PCI bus interrupts - Selecting correct PCI slot
i
To achieve optimum stability, performance and compatibility, avoid the multiple use of ISA
IRQs or PCI IRQ Lines (IRQ sharing). Should IRQ sharing be unavoidable, then all
involved devices and their drivers must support IRQ sharing.
PCI IRQ Lines connect AGP slots, PCI slots and onboard components to the interrupt controller.
PCI IRQ Lines are permanently wired on the mainboard.
Which ISA IRQs are assigned to the PCI IRQ Lines is normally automatically specified by the BIOS
(see description in "BIOS Setup").
Monofunctional expansions cards:
Standard AGP and PCI expansion cards require a maximum of one interrupt, which is called the PCI
interrupt INT A. Expansion cards that do not require an interrupt can be installed in any desired slot.
Multifunctional expansion cards or expansion cards with integrated PCI-PCI bridge:
These expansion cards require up to four PCI interrupts: INT A, INT B, INT C, INT D. How many
and which of these interrupts are used is specified in the documentation provided with the card.
The assignment of the PCI interrupts to the PCI IRQ Lines is shown in the following table:
22 - English
A26361-D1562-Z120-2-6319
Adding PCI cards
Controller or slot INT
Mechanical slot
Onboard controller
1
AC97
3
4
1
2
3
PCI slot
2nd
3rd
4th
1 (A)
X
-
-
X
-
-
-
-
-
A
-
-
-
2 (B)
-
-
-
-
-
X
X
X
-
B
-
-
-
3 (C)
-
-
X
-
-
-
-
-
-
-
D
C
A
4 (D)
-
X
-
-
-
-
-
-
-
-
C
D
B
5 (E)
-
-
-
-
-
-
-
-
X
-
-
-
-
6 (F)
-
-
-
-
-
-
-
-
-
-
B
A
C
7 (G)
-
-
-
-
-
-
-
-
-
-
A
B
D
8 (H)
-
-
-
-
X
-
-
-
-
-
-
-
-
LAN
Modem
Audio
AGP
1st
SMBus
USB 1,1
2
USB 2,0
PCI
Interrupt
Line
Use the first PCI slots that have a single PCI IRQ Line (no IRQ sharing). If you must use another
PCI slot with IRQ sharing, check whether the expansion card properly supports IRQ sharing with the
other devices on this PCI IRQ Line. The drivers of all cards and components on this PCI IRQ Line
must also support IRQ sharing.
A26361-D1562-Z120-2-6319
English - 23
Adding PCI cards
Replacing the lithium battery
In order to permanently save the system information, a lithium battery is installed to provide the
CMOS-memory with a current. A corresponding error message notifies the user when the charge is
too low or the battery is empty. The lithium battery must then be replaced.
!
Incorrect replacement of the lithium battery may lead to a risk of explosion!
The lithium battery may be replaced only with an identical battery or with a type
recommended by the manufacturer.
Do not throw lithium batteries into the household waste. They must be disposed of in
accordance with local regulations concerning special waste.
Make sure that you insert the battery the right way round. The plus pole must be on the
top!
The lithium battery holder exists in different designs that function in the same way.
3
2
4
2
1
3
Ê
Press the locking lug in the direction of the arrow; the battery jumps somewhat out of the
holder (1).
Ê
Ê
Remove the battery (2).
Push the new lithium battery of the identical type into the holder (3) and press it downward until
it engages (4).
24 - English
A26361-D1562-Z120-2-6319
BIOS update
BIOS update
When should a BIOS update be carried out?
Fujitsu Siemens Computers makes new BIOS versions available to ensure compatibility to new
operating systems, new software or new hardware. In addition, new BIOS functions can also be
integrated.
A BIOS update should always also be carried out when a problem exists that cannot be solved with
new drivers or new software.
Where can I obtain BIOS updates?
The BIOS updates are available on the Internet at www.fujitsu-siemens.de/mainboards.
How does a BIOS update work?
You have two ways of doing this:
1. BIOS update under DOS with bootable BIOS update floppy disk - brief description
Ê
Ê
Ê
Ê
Ê
Ê
Download the update file from out website to your PC.
Insert an empty floppy disk (1.44 MB).
Run the update file (e.g. 1522103.EXE).
A bootable update floppy disk is created. Leave this floppy disk in the drive.
Restart the PC.
Follow the instructions on screen.
i
Detailed information on the BIOS update under DOS is provided in the manual on "BIOS
Setup" ("Drivers & Utilities" CD).
2. BIOS update under Windows with DeskFlash utility
A BIOS update can also be carried out directly under Windows with the DeskFlash utility. DeskFlash
is located on the "Drivers & Utilities" CD (from CD version 2001.05 with DeskViewOEM V5.0). In the
Readme file in the subfolder DeskFlash you will find the installation instructions for DeskFlash. Further
information on DeskFlash is provided in the DeskView.PDF file and in the DeskViewOEM online help.
BIOS Recovery - Recovering System BIOS
i
All BIOS settings are reset to the default values.
Ê
Ê
Ê
Ê
Ê
Open the casing as described in the operating manual.
Ê
Open the casing as described in the operating manual.
Set the switch for "Restore system BIOS" to ON.
Close the casing as described in the operating manual.
Insert a BIOS update floppy disk and start the PC.
Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you
hear the signal sequence "short-short- long- long- long" and the diskette access indicator is
dark. This can take a few minutes.
A26361-D1562-Z120-2-6319
English - 25
Microcode Update
Ê
Ê
Ê
Ê
Ê
Ê
Set the switch for "Restore system BIOS" to OFF.
Close the casing as described in the operating manual.
Remove the floppy disk from the drive.
Start the PC and invoke BIOS Setup.
Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes.
Save the change and terminate BIOS Setup.
The BIOS recovery has now been completed. The system restarts.
i
Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
("Drivers & Utilities" CD).
Microcode Update
What is a microcode update?
As there are no drivers for processors, Intel offers the possibility from the P6 family (Pentium Pro)
on to update the command set (microcode) of the processor. This enables minor errors to be
corrected and the performance to be increased.
To guarantee the best possible performance and error-free operation, Intel recommends updating
the microcode for every new processor. Intel refers to the use of the processor without microcode
updates as operation outside the specifications.
Safety for processor on Fujitsu Siemens Computers mainboards
If the processor uses an old or incorrect microcode, error-free operation cannot be ensured. Fujitsu
Siemens Computers has therefore implemented a function on its mainboards that interrupts the
booting process if no suitable microcode is available for the installed processor. The output error
message is
Patch for installed CPU not loaded. Please run the bios flash update
diskette.
This message appears until the microcode update has been carried out. If the computer is
nevertheless operated without a microcode update, error-free operation is not ensured.
When should a microcode update be carried out?
A microcode update should be carried out after the installation of a new processor.
In contrast to the BIOS update, only an updated version of the processor command set is stored.
The system BIOS remains unaffected by this.
26 - English
A26361-D1562-Z120-2-6319
Drivers
Microcode update under DOS with bootable microcode update floppy disk - brief description
Ê
Ê
Ê
Ê
Ê
Ê
Download the update file from out website to your PC.
Insert an empty floppy disk (1.44 MB).
Run the update file under DOS (e.g. 1495101.EXE).
A bootable update floppy disk is created. Leave the floppy disk in the drive.
Restart the PC.
Follow the instructions on screen.
To determine whether the latest microcode update has been loaded, the so-called Patch-ID of the
processor can be read out.
Ê
Press the [F1] key in the BIOS Setup.
The entry CPU / Patch ID is shown on the displayed information page.
A list with the current processors and the related Patch-IDs is available on the Internet.
i
If the processor is not recognised, you also require the microcode update tool for
processors of the P6 family.
Drivers
Only when no drivers are installed on your system, or you want to update these, proceed as follows:
Ê
Ê
Insert the CD "Drivers & Utilities Collection" into the CD-ROM drive.
Ê
Ê
Select DeskUpdate - Fully automatic installation.
If the CD does not start automatically, run the START.EXE programme in the main directory of
the CD.
Follow the screen instructions.
A26361-D1562-Z120-2-6319
English - 27
Annex
Electrical Properties
Loadability for connections and fuses
i
Make sure that the connected devices do not overload the connections.
Fuse no.
1
Fuse
750 mA
2
1500 mA
3
1500 mA
4
1500 mA
5
1500 mA
Connection
Fan1, Fan2
Keyboard
Mouse
VGA port
USB port A
USB port B
USB port C
USB port D
USB port E
USB port F
USB port G
USB port H
Maximum loadability
1000 mA each
Not specified
Not specified
Minimum 50 mA
500 mA
500 mA
500 mA
500 mA
500 mA
500 mA
500 mA
500 mA
The fuses on this mainboard can be used several times (polyfuses). Shortly after the error state has
been eliminated, the fuses reset to the original state.
Mainboard current requirement
You require a Pentium4 power supply nit as per the ATX12V specification for this mainboard. If you
do not have a PC from Fujitsu Siemens Computer, make sure that the power supply unit provides
the required amperages.
Source
Maximum current
+12 V
Maximum
difference
±5 %
ATX12V power supply
-12 V
±10 %
0.05A
ATX12V power supply
+5,0 V
±5 %
6.5 A
ATX12V power supply
ATX12V power supply
Standby voltage of power
supply unit
Voltage
9A
+3,3 V
±5 %
4.0 A
+5.0 V SB
±5 %
0.5 A
The specifications apply to the onboard components and represent the least favourable case. In
addition, at least 350 mA is required for PCI on 3.3 V, and 500 mA per connected device for USB on
5 V.
28 - English
A26361-D1562-Z120-2-6319
APM and ACPI system status, energy-saving modes
APM and ACPI system status, energy-saving modes
System
status
Normal
operation
Simple
energysaving mode
ACPI
Status
)1
G0
G1
Maximum
energysaving mode
)4
APM
Status
Power
LED I
)2
Power
LED II
)3
Sleep
LED
Power
consum
ption
Wake-up
time
S0
On
On/Off
On
Off
Normal
S1
Standby
Off/On
flashin
g
On
Almost
like
normal
Almost
immediate
ly
S3
Off/On
flashin
g
RAM,
wake-up
compon
ents
ca. 5s
S4
Off/Off
Off
RAM,
wake-up
components
ca. 20s
Soft Off
Off/Off
Off
Nearly
zero
Full boot
time
Off
Off/Off
Off
Zero
Full boot
time
"Save to
DRAM"
Maximum
energysaving mode
**
"Save To
Disk"
“Soft Off"
G2
Mechanicall
y Off
G3
S5
Off
)1
G = Global status; S = System status
)2
Two colours
)3
One colour
)4
The power supply unit must provide sufficiently loadable 5 V standby voltage.
To use the WOL functionality the power supply must provide a 5 V auxiliary voltage (5VSB) of at
least 1 A.
A26361-D1562-Z120-2-6319
English - 29
Mainboard Revision and BIOS Version
Mainboard Revision and BIOS Version
The compatibility, e.g. with new processors, can be independent of the BIOS version or the revision
status of the mainboard used. The CPU and BIOS compatibility lists are available on the Internet at
www.fujitsu-siemens.de/mainboards.
Mainboard Revision
The revision status of the mainboard exactly identifies which mainboard you have. It is indicated on
a sticker on the edge of the mainboard:
D1562-A21 GS 1
05618476
Example Mainboard-Revision
BIOS version
The BIOS version can be displayed in the BIOS Setup.
Ê
Ê
Press [F2] during booting to open the BIOS Setup.
Press [F1].
The BIOS version is specified on the displayed information page under the entry BIOS Release.
30 - English
A26361-D1562-Z120-2-6319
Error messages
This chapter contains error messages generated by the mainboard.
Available CPUs do not support the same bus frequency - System halted!
Memory type mixing detected
Non Fujitsu Siemens Memory Module detected - Warranty void
There are more than 32 32 RDRAM devices in the system
Check whether the system configuration has changed. If necessary, correct the settings.
BIOS update for installed CPU failed
This message appears if the microcode update required for the connected processor is not
contained in the system BIOS.
Ê
Ê
Boot the system with the inserted Flash BIOS floppy disk.
Abort the normal Flash BIOS update by answering the question about whether you want to
perform the update with
n Ú
Ê
To carry out the Flash BIOS update for the processor, enter:
flashbioË/p6 Ú
Check date and time settings
The system date and time are invalid. Set the current date and time in the Main menu of the
BIOS Setup.
CPU ID 0x failed
Switch the server off and on again. If the message is still displayed, go into the BIOS setup and
set the corresponding processor to Disabled in the Server - CPU Status menu; please contact
your sales outlet or customer service centre.
CPU mismatch detected
You have replaced the processor or changed the frequency setting. As a result, the
characteristic data of the processor have changed. Confirm this change by running the BIOS
Setup and exiting it again.
Diskette drive A error
Diskette drive B error
Check the entry for the diskette drive in the Main menu of the BIOS Setup. Check the
connections to the diskette drive.
A26361-D1562-Z120-2-6319
English - 31
Error messages
DMA test failed
EISA CMOS not writable
Extended RAM Failed at offset: nnnn
Extended RAM Failed at address line: nnnn
Failing Bits: nnnn
Fail-Safe Timer NMI failed
Multiple-bit ECC error occurred
Memory decreased in size
Memory size found by POST differed from EISA CMOS
Single-bit ECC error occurred
Software NMI failed
System memory exceeds the CPU’s caching limit
System RAM Failed at offset: nnnn
Shadow RAM Failed at offset: nnnn
Switch the device off and on again. If the message is still displayed, please contact your sales
outlet or customer service centre.
Failure Fixed Disk 0
Failure Fixed Disk 1
Fixed Disk Controller Failure
Check the entry for the hard disk drive in the Main menu and the entry for the IDE drive
controller in the Advanced - Peripheral Configuration menu of the BIOS Setup. Check the hard
disk drive's connections and jumpers.
Incorrect Drive A - run SETUP
Incorrect Drive B - run SETUP
Correct the entry for the diskette drive in the Main menu of the BIOS Setup.
Invalid NVRAM media type
Switch the device off and on again. If the message is still displayed, please contact your sales
outlet or customer service centre.
Invalid System Configuration Data
In the Advanced menu of the BIOS Setup set the entry Reset Configuration Data to Yes.
Invalid System Configuration Data - run configuration utility
Press F1 to resume, F2 to Setup
This error message may be displayed if the machine was switched off during system start-up.
Call BIOS Setup and switch to the Advanced menu. Select the menu item Reset Configuration
Data and change the setting to Yes. Save the change and terminate BIOS Setup. Reboot the
device.
Keyboard controller error
Connect another keyboard or another mouse. If the message is still displayed, please contact
your sales outlet or customer service centre.
Keyboard error
Check that the keyboard is connected properly.
Keyboard error nn
nn Stuck Key
Release the key on the keyboard (nn is the hexadecimal code for the key).
32 - English
A26361-D1562-Z120-2-6319
Error messages
Missing or invalid NVRAM token
Switch the device off and on again. If the message is still displayed, please contact your sales
outlet or customer service centre.
Monitor type does not match CMOS - RUN SETUP
Correct the entry for the monitor type in the Main menu of the BIOS Setup.
On Board PCI VGA not configured for Bus Master
In the BIOS Setup, in the Advanced menu, submenu PCI Configuration, set the Shared PCI Master
Assignment entry to VGA.
One or more RDRAM devices are not used
One or more RDRAM devices have bad architecture/timing
One or more RDRAM devices are disabled
Contact your system administrator or contact our customer service centre.
Operating system not found
Check the entries for the hard disk drive and the floppy disk drive in the Main menu and the
entries for Boot Sequence submenu of the BIOS Setup.
Parity Check 1
Parity Check 2
Switch the device off and on again. If the message is still displayed, please contact your sales
outlet or customer service centre.
Previous boot incomplete - Default configuration used
By pressing function key [F2] you can check and correct the settings in BIOS Setup. By
pressing function key [F1] the system starts with incomplete system configuration. If the
message is still displayed, please contact your sales outlet or customer service centre.
Real time clock error
Call the BIOS Setup and enter the correct time in the Main menu. If the message is still
displayed, please contact your sales outlet or customer service centre.
Service Processor not properly installed
The server management controller has not been correctly installed. If the message is still
displayed, please contact your sales outlet or customer service centre.
Storage Extension Group = xy
Configuration error, x Storage Extensions(s) found, configured are y
SE(s).
Device List: k1, k2 ...
The specified number of storage expansion units (SEs) in the BIOS Setup menu Server - Storage
Extensions - Number of connected SE is incorrect. Check how many SEs within the group are
connected at the server and change the setting in BIOS Setup. Check whether you have
assigned the same device ID twice.
xy = Group number
x = Number of SEs found on the communication bus
y = Number of SEs entered in Number of connected SE
k1, k2 ... = Device ID of the storage extensions found
A26361-D1562-Z120-2-6319
English - 33
Error messages
System battery is dead - Replace and run SETUP
Replace the lithium battery on the mainboard and redo the settings in the BIOS Setup.
System Cache Error - Cache disabled
Switch the device off and on again. If the message is still displayed, please contact your sales
outlet or customer service centre.
System CMOS checksum bad - - Default configuration used
Call the BIOS Setup and correct the previously made entries or set the default entries.
System Management Configuration changed or Problem occurred
A system fan or system sensor has failed. Check the hardware operation.
System timer error
Switch the device off and on again. If the message is still displayed, please contact your sales
outlet or customer service centre.
Uncorrectable ECC DRAM error
DRAM Parity error
Unknown PCI error
Switch the device off and on again. If the message is still displayed, please contact your sales
outlet or customer service centre.
Verify CPU frequency selection in Setup
The frequency setting for the processor is invalid. Correct the BIOS Setup and the setting.
34 - English
A26361-D1562-Z120-2-6319
Glossary
The technical terms and abbreviations given below represent only a selection of the full list of
common technical terms and abbreviations.
Not all technical terms and abbreviations listed here are valid for the described mainboard.
ACPI
CAN
Advanced Configuration and
Power Management Interface
Audio Codec '97
Accelerated Graphics Port
Audio Modem Riser
Alert On LAN
Advanced Power Management
Alert Standard Format
Advanced Technology
Attachment
Basic Input Output System
Baseboard management
controller
Controller Area Network
CCR
Chipcard Reader
RDRAM
CNR
CPU
CSA
Communication Network Riser
Central Processing Unit
Communications Streaming
Architecture
Dual Inline Memory Module
Digital Video Out
RIMM
RTC
SATA
AC'97
AGP
AMR
AOL
APM
ASF
ATA
BIOS
BMC
DIMM
DVO
ECC
EEPROM
FDC
FIFO
FSB
FWH
GMCH
GPA
I2C
IAPC
ICH
IDE
IPSEC
Error Correcting Code
Electrical Erasable
Programmable Read Only
Memory
Floppy disk controller
First-In First-Out
Front Side Bus
Firmware Hub
Graphics and Memory Controller
Hub
Graphics Performance
Accelerator
Inter Integrated Circuit
Instantly Available Power
Managed Desktop PC Design
I/O Controller Hub
Intelligent Drive Electronics
Internet Protocol Security
A26361-D1562-Z120-2-6319
ISA
Industrial Standard Architecture
LAN
LSA
MCH
MMX
NIC
P64H
PCI
Local Area Network
LAN Desk Service Agent
Memory Controller Hub
MultiMedia eXtension
Network Interface Card
PCI64 Hub
Peripheral Component
Interconnect
Preboot eXecution Environment
Random Access Memory
PXE
RAM
RAMDAC
Random Access Memory Digital
Analogue Converter
Rambus Dynamic Random
Access Memory
Rambus Inline Memory Module
Real Time Clock
Serial ATA
SB
SDRAM
Soundblaster
Synchronous Dynamic Random
Access Memory
SGRAM
Synchronous Graphic Random
Access Memory
SIMD
SMBus
SVGA
USB
VGA
Streaming Mode Instruction
(Single Instruction Multiple Data)
System Management Bus
Super Video Graphic Adapter
Universal Serial Bus
Video Graphic Adapter
WOL
Wake On LAN
English - 35
Download PDF

advertising