Fujitsu DX80 S2/DX90 S2 Computer Drive User Manual

410E(01).fm Page 1 Wednesday, March 26, 2003 3:43 PM
Digital Cordless Phone
Operating Instructions
KX-TCD410E
Contents
Preparation
Before Initial Use ......................... 2
Important Information .................. 3
Setting up .................................... 4
Preparation
Model No.
Cordless Telephone
Cordless Telephone
Using the Telephone ................... 9
Making Calls .............................. 10
Caller ID .................................... 11
Answering Calls......................... 13
Phonebook ................................ 14
Handset Settings ....................... 18
Base Unit Settings ..................... 24
Initial Settings ............................ 26
Multi-unit User Operation........... 28
Intercom .................................... 32
Useful Information
C
1
4
7
2
3
5
6
8
9
0
R
INT
Caller ID Compatible
PLEASE READ BEFORE USE AND SAVE.
Charge the battery for about 7 hours before initial use.
Useful Information
Before Requesting Help ............ 33
Technical Information ................ 35
Index.......................................... 36
Guarantee ................................. 37
410E.book Page 2 Wednesday, March 26, 2003 1:49 PM
Before Initial Use
Thank you for purchasing your new Panasonic digital cordless telephone.
• Order accessory items for all Communications Products with ease and confidence
either by telephoning our Customer Care Centre on:
08700 100 076 Monday - Friday 9:00am - 5:30pm
• Or go on line through our Internet Accessory ordering application at
shop@Panasonic http://www.panasonic.co.uk
• Most major credit and debit cards accepted.
• All enquires transactions and distribution facilities are provided directly by Panasonic
UK Ltd.
• It couldn’t be simpler!
Dear purchaser,
You have acquired a KX-TCD410E, which is a product made in regard with
the European Standards for Cordless Telephones (DECT). DECT technology is
characterized by high-security protection against interceptions as well as high-quality
digital transmission. This telephone was designed for a wide range of applications. For
example, this telephone can be used within a network of base units and handsets,
constituting a telephone system which:
• operates up to 6 handsets at one base unit
• allows an intercom between 2 handsets.
• allows the operation of a handset at up to 4 base units, expanding the communication
radio area.
Caller ID Service, where available, is a telephone company service. After subscribing
to Caller ID, this phone will display the caller’s phone number.
Accessories (included)
AC Adaptor
Telephone Line
PQLV19E
Cord
(for UK)
Rechargeable
Batteries
(AAA size)
HHR-4EPT/BA2
(P03P)
Battery Cover
PQKK10134Z4
Additional accessories are available for purchase. Contact your Panasonic Customer
Care Helpline for further details. U.K. 08700 100 076 R.O.I. 01289 8333
2
410E.book Page 3 Wednesday, March 26, 2003 1:49 PM
Important Information
recharging, or have failed.
• During a mains power failure.
• When the Key Lock is set to ON.
• When the unit is in Direct Call mode.
Do not open the base unit or handset
(other than to change the batteries).
This apparatus should not be used near
emergency/intensive care medical
equipment and should not be used by
people with pacemakers.
Care should be taken that objects do not
fall onto, and liquids are not spilled into
the unit. Do not subject this unit to
excessive smoke, dust, mechanical
vibration or shock.
Environment
Do not use this unit near water.
This unit should be kept away from heat
sources such as radiators, cookers, etc. It
should also not be placed in rooms where
the temperature is less than 5°C or
greater than 40°C.
The AC Adaptor is used as the main
disconnect device, ensure that the AC
outlet is located / installed near the unit
and is accessible.
Battery Caution
Use only specified batteries.
Only use rechargeable batteries.
Do not mix old and new batteries.
Do not dispose of batteries in a fire, they
may explode.
Check local waste management codes for
special disposal instructions.
Do not open or mutilate the batteries.
Released electrolyte is corrosive and may
cause burns or injury to the eyes or skin.
The electrolyte may be toxic if swallowed.
Exercise care in handling the batteries in
order not to short the batteries with
conductive materials such as rings,
bracelets and keys.
The batteries and/or conductor may
overheat and cause burns.
Charge the batteries provided in
accordance with the information given in
this operating guide.
Location
• For maximum distance noise-free
operation, place your base unit:
- Away from electrical appliances such
as TV, radio, personal computer or
another phone.
- In a convenient high and central
location.
Safety Caution
The ringer tone is reproduced through the
earpiece. To avoid damage to hearing,
first answer the call, then hold the phone
to the ear.
WARNING:
TO PREVENT THE RISK OF
ELECTRICAL SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN
OR ANY OTHER TYPE OF
MOISTURE.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
3
Preparation
Only use the power supply included with
the product.
Do not connect the AC Adaptor to any AC
outlet other than the standard AC220240V.
The apparatus is approved for use with
PQLV19E power supply.
This apparatus is unable to make
emergency telephone calls under the
following conditions:
• The portable handset batteries need
410E.book Page 4 Wednesday, March 26, 2003 1:49 PM
Setting up
Connection
Do not connect the telephone line cord to the phone socket 4 until the handset is fully
charged.
Plug in the AC adaptor and the telephone line cord in order 1, 2, 3.
(Switch on AC mains outlet.)
LINE
1
Hook
2
4
Fasten the AC adaptor
cord to prevent it from
being disconnected.
3
The AC adaptor must remain connected at all times (It is normal for the adaptor to feel
warm during use).
• Never install telephone wiring during a lightning storm.
Battery Installation
Please ensure the batteries are inserted as shown.
part should be inserted first.
Close the cover as indicated by the arrow.
• When you replace the batteries,
part should be removed first.
To replace the battery:
Press the notch on the cover firmly
and slide it as indicated by the arrow.
Replace 2 batteries and close the
cover then charge the handset for
about 7 hours.
4
410E.book Page 5 Wednesday, March 26, 2003 1:49 PM
Setting up
Battery Charge
At the time of shipment, the batteries are
not charged. To charge, place the
handset on the base unit. Please charge
the batteries for about 7 hours before
initial use. During charging, the battery
icon is as shown below.
During charging
(Flashing)
Display icon
Battery strength
High
Medium
Low
Needs to be
charged
The handset which power is off will be
turned on automatically when it is placed
on the base unit.
In normal use, the handset and the base
unit should be powered on at all times.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
5
Preparation
Fully charged
Battery Life
Battery life is dependent on use and
conditions but in general when using fully
charged Ni-MH batteries (700 mAh):
Talk time: 10hrs approx.
Standby time: 120hrs approx.
When using Ni-Cd batteries (250 mAh):
Talk time: 4hrs approx.
Standby time: 40hrs approx.
(Times indicated are for peak
performance)
The batteries reach peak performance
after several full charge/discharge cycles.
The batteries cannot be overcharged
unless they are repeatedly removed and
replaced.
If battery life is shortened then please
check that battery and charge terminals
are clean.
For maximum battery life, it is
recommended that the handset is not
recharged until battery icon flashes
.
410E.book Page 6 Wednesday, March 26, 2003 1:49 PM
Setting up
Symbols Used in This Operating Instructions
Symbol
Meaning
To search the desired item, press UP or DOWN.
To select the desired item, press RIGHT.
To search and then to select the desired item, press UP or DOWN then
RIGHT.
To move the cursor to the right or to the left, press RIGHT or LEFT.
To go to the next step.
" "
The words in " " indicate the words in display.
Replacing the Batteries
If the
icon flashes after a few telephone calls even when the handset batteries have
been fully charged, 2 batteries must be replaced.
Charge new batteries for approximately 7 hours before initial use.
(The telephone line cord must not be connected to the telephone socket at this
time.)
When replacing the batteries, ensure that the correct battery type is selected.
Selecting the Battery Type
2
1
Press
MENU.
4
3
Search/Select
"SETTING HS".
Search/Select
"OTHER OPT".
Search/Select
"BATTERY TYPE".
5
Search/Select
"NI-Cd" or "NI-MH".
any time.
• To exit the operation, press
• When Ni-Cd batteries are fitted with the "BATTERY TYPE" setting in "NI-MH",
icon will disappear and stop charging even if the handset is on the cradle.
• Do not use non-rechargeable batteries. If non-rechargeable batteries are fitted and
start charging, it may cause the leakage of the battery electrolyte.
Please use only Panasonic P03P(Ni-MH) or P03H(Ni-Cd) batteries.
6
410E.book Page 7 Wednesday, March 26, 2003 1:49 PM
Setting up
Location of Controls
Handset
:
Receiver
2-
TALK Button
Display
3-
Navigator Key
1
6
2
7
3
4
C
1
4
5
7
Charge
Contact
2
8
3
5
6
8
9
0
R
INT
Microphone
9
Charge
Contact
45-
PHONEBOOK Button
Preparation
1-
REDIAL/PAUSE Button
RECALL Button
R
6-
:
7-
OFF/POWER Button
8-
C
9-
INT
MENU/OK Button
CLEAR Button
INTERCOM Button
Base unit
LINE
PAGE Button
and Indicator
Handset Display
Within range of a base unit
Out of range/No registration/
No power on base unit
Call BAR ON (p.21)
Direct Call ON (p.22)
Paging or using the handset
Making or answering calls
Key Lock ON (p.23)
Phonebook Mode
In Setting Mode
Ringer Volume OFF (p.19)
Battery strength is low.
Battery strength is high.
Dialling Pause (p.23)
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
7
410E(02).fm Page 8 Wednesday, March 26, 2003 3:40 PM
Setting up
Wall Mounting
This unit can be mounted on a wall.
- Insert screws into the wall. The centre of the screw hole should be 8 cm horizontally
apart.
- Connect the AC adaptor and the telephone line cord.
- Arrange the wires as shown, then mount the unit.
8 cm
Screws
Hook
Wall Template
8 cm
8
410E.book Page 9 Wednesday, March 26, 2003 1:49 PM
Using the Telephone
Power On/Off
Power on
Power off
Press for more than
1 second. *1
Press for more than
2 second. *2
*1 When
button is released, the display changes to the standby mode.
*2 The display goes blank.
Making a Call
Pre-dialling
Post-dialling
1 Phone Number *1 2
1
Press TALK.
2 Phone Number
Press TALK.
Answering a Call
Terminating a Call
(During a call)
Press TALK. *1
Press OFF.
• Each ringer will start ringing with lower volume then gradually increase the volume
when receiving a call.
*1 You can also answer a call by pressing any dialling button, INTERCOM, t, or x.
Setting the Clock/Date
After a mains power failure the clock needs to be reset. Ensure that
flashing.
2
1
Press MENU.
"INPUT CODE"
Press OK.
Time
Enter time.
4-digit
(24 hour clock) *1
3
Search/Select
"SETTING BS".
5
4
"INPUT CODE"
Press
RIGHT.
6
twice
icon is not
Date
Enter day,
month then
year. *2
7
Press OK.
any time.
• To exit the operation, press
*1 For example, to set 7:15, enter 0715.
*2 For example, to set the 16th of February, 2003, enter 160203.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
9
Cordless Telephone
*1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers.
410E.book Page 10 Wednesday, March 26, 2003 1:49 PM
Making Calls
Redialling
The last 10 numbers dialled are stored in the redial list automatically.
Dialling with the Redial List
1
Dialling the Last Number Dialled
2
Press
REDIAL.*1
3
Search the desired
dialled item.
1
2
Press REDIAL.
Press TALK.
Press
TALK.
Editing the Dialled Number in the Redial List
1
2
Press REDIAL.*1
4
5
Move
cursor.
3
Search/Select the
desired dialled item.
AND/
OR
C
Press
CLEAR.*2
The 1st digit of
the desired dialled
number blinks.
Search/Select
"EDIT CALL NO".
6
Number
Edit the phone
number.*3
Press TALK.
OR
Press OK 3 times
to store the number.
If you need to
store a name,
go to Name
on page 14 or
press OK.
Clearing One/All Dialled Item(s) in the Redial List
1
2
Press REDIAL.*1
3
Search/Select the
desired dialled item.
4
Search/Select
"CLEAR" or
"ALL CLEAR".
Search/Select
"YES".
any time.
• To exit the operation, press
*1 If there is no item stored in the redial list, the display shows "NO ITEM".
*2 Digits are cleared to the left of the flashing digit.
*3 Digits are added to the left of the flashing digit. If you need to clear and/or add more
than one number, repeat the steps from 4.
10
410E.book Page 11 Wednesday, March 26, 2003 1:49 PM
Caller ID
Caller ID Service
Caller ID is a service of your Network provider and will only operate if you have
subscribed to this feature.
After subscribing to Caller ID, this phone will display the caller information.
If your unit is connected to a PBX or a telephone line that does not support this service,
you will not be able to use it.
Caller ID does not display caller information while using the handset for an intercom call.
However, the caller information will be stored to the Caller ID List.
Call Waiting: Call Waiting is a service of your Network provider and will only operate if
you have subscribed to this service.
After subscription, your handset displays a second caller’s phone number while talking
and a Call Waiting tone is heard.
You can answer the second call, keeping the first call on hold.
Please consult your Network provider for details of this service.
Caller ID Display
Cordless Telephone
When receiving a call, the display shows its phone
number.
For example, a caller whose phone number is
01234567890 has been received.
If you store a phone number with a name in the
phonebook, the display shows caller’s name when
receiving a call.
If the caller has requested not to display his/ her
information, the display shows "PRIVATE".
If the caller dialled from an area which does not provide
Caller ID service, the display shows "OUT OF AREA".
When new calls have been received, the display
shows the number of calls.
For example, 4 new calls have been received.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
11
410E.book Page 12 Wednesday, March 26, 2003 1:49 PM
Caller ID
Caller ID List
Information up to 50 different callers is stored from the most recent call to the oldest call
in the caller list. When the 51st call is received, the oldest caller information is cleared.
If you receive a call from the same phone number you stored with a name in the
phonebook, the display will show the caller’s name.
Calling Back
1
2
Press TALK.
Search the desired
received item.*1
Editing the Received Number in the Caller List
1
2
Search/Select the
desired received
item.*1
4
Search/Select
"EDIT CALL NO".
AND/ Number
C
OR
Press
Edit the
CLEAR.*2
number.*3
5
The 1st digit of the
desired received
number blinks.
3
Move
cursor.
Press TALK.
OR
Press OK 3 times
to store the number.
If you need to store
a name, go to
Name on page 14
or press OK.
Clearing One/All Received Item(s) in the Caller List
1
Search/Select the
desired received item.*1
2
Search/Select
"CLEAR" or
"ALL CLEAR".
3
Search/Select
"YES".
any time.
• To exit the operation, press
*1 If there is no item stored in the caller list, the display shows "NO ITEM".
on the
right edge of the display when searching the item in the caller list indicates that the
item has been already shown previously.
*2 Digits are cleared to the left of the flashing digit.
*3 Digits are added to the left of the flashing digit. If you need to clear and/or add more
than one number, repeat the steps from 3.
12
410E.book Page 13 Wednesday, March 26, 2003 1:49 PM
Answering Calls
Auto Talk
If you set Auto Talk to on, you can answer the phone by lifting the handset off the base
unit.
1
2
Press
MENU.
3
Search/Select
"SETTING HS".
• To exit the operation, press
4
Search/Select
"OTHER OPT".
5
Search/Select
"AUTO TALK".
Search/Select
"ON" or "OFF".
any time.
Temporary Bell Off
When an external call is incoming, you can temporarily turn off the handset ringer.
This function will not work when the handset is on the base unit or if an internal call is
incoming.
Receiver Volume
During a call, press UP or DOWN to change the volume setting to LOW (0), MEDIUM
(00), HIGH (000).
(During a call)
Press UP or
DOWN.
Handset Locator/Paging
Using this feature, you can locate a misplaced handset by paging.
1 Press
on the base unit
2 All registered handsets ring for 1 minute.
<To stop paging>
3 Press
on the base unit OR
*1
on one of the handsets.
*1 You can also stop paging by pressing any dialling buttons, INTERCOM, t or x.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
13
Cordless Telephone
Press and hold
DOWN for
over 1 second.
410E.book Page 14 Wednesday, March 26, 2003 1:49 PM
Phonebook
You can store up to 20 caller information in the phonebook. If you received a call from
the same phone number you stored with a name in the phonebook, the display will show
the caller’s name.
Storing a Caller Information
1
2
5
3
Select
"NEW PHONE".
Press MENU.
4
Phone Number
Press OK.
Enter phone number.
(max. 24 digits) *1
6
Name
Enter name.
(max. 9 characters)*1
Press OK.*2
any time.
• To exit the operation, press
*1 If you need correction, press RIGHT or LEFT to move cursor then clear character by
pressing CLEAR, and/or enter characters. Characters are cleared or added to the left
of the flashing character. To enter characters, see Character Selection below.
*2 To continue storing another caller information, repeat the steps from 3.
Character Selection
Keys
Number of times key is pressed
3
O
R
V
4
6
S
8
5
8
2
N
Q
U
4
9
W
Z
9
5
Blank
X
0
Y
0
3
2
[
B
E
3
]
C
F
*
2
3
4
G
H
I
2
5
J
K
L
Number of times key is pressed
1
M
P
T
1
#
A
D
1
Keys
4
5
,
6
-
7
/
8
1
6
7
7
Character Table
A B C D E FG H I JK LM N O P Q R S T U VW X Y
Z 1 2 3 4 5 6 7 8 9 * 0 # - / [ ] ,
14
410E.book Page 15 Wednesday, March 26, 2003 1:49 PM
Phonebook
Editing a Caller Information
1
Press
PHONEBOOK.*1
2
3
The 1st digit of the
desired phone
number blinks.
Select "EDIT".
Search/Select
desired item.
<Phone Number>
4
5
C
Press CLEAR.*2
Move cursor.
AND/
OR
Number
6
Edit the phone
number.*3
Press OK.
<Name>
7
8
Move cursor.
C
Press CLEAR.*2
AND/
OR
9
Name
Edit the name.*4
Press OK.
1
2
Press
PHONEBOOK.*1
3
Search/Select
desired item.
Cordless Telephone
Clearing a Caller Information
4
Search/Select
"CLEAR".
Search/Select
"YES".*5
Dialling with the Phonebook
1
2
Press
PHONEBOOK.*1
3
Search
desired item.
Press TALK.
any time.
• To exit the operation, press
*1 If there is no item stored in the phonebook, the display shows "NO ITEM".
*2 Digits are cleared to the left of the flashing digit.
*3 Digits are added to the left of the flashing digit. If you need to clear or add more than
one digit, repeat the steps from 4.
*4 Characters are added to the left of the flashing character. If you need to clear or add
more than one character, repeat the steps from 7.
*5 To continue clearing another caller information, repeat the steps from 2.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
15
410E.book Page 16 Wednesday, March 26, 2003 1:49 PM
Phonebook
Storing the Phone Number into the Phonebook
When Pre-dialling
1 Phone Number *1 2
3
Press OK to
store the number.
4
Press OK twice.
Name
Enter name.*2
5
Press OK.
any time.
• To exit the operation, press
*1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers.
*2 To enter characters, see Character Selection on page 14.
Storing the Number from the Redial/Caller List into
the Phonebook
Press REDIAL.*1
1
OR
Search/Select
the desired received
number.*1
Search/Select
the desired dialled
number.
2
3
Search/Select
"SAVE TEL NO".*2
Press OK.
If you need to store a name, go to Name on page 14.
4
OR
Press OK.
any time.
• To exit the operation, press
*1 If there is no item stored in the redial/caller list, the display shows "NO ITEM".
*2 If you need correction, press RIGHT or LEFT to move cursor then clear a digit by
pressing CLEAR, and/or enter digits. Digits are cleared or added to the left of the
flashing digit.
16
410E.book Page 17 Wednesday, March 26, 2003 1:49 PM
Phonebook
Hot Key
You can assign the dialling buttons 1 through 9 as hot keys. You can choose 9 phone
numbers from the phonebook.
Registering a Phone Number as a Hot Key
1
Press
PHONEBOOK.*1
2
3
Search/Select
desired item.
4
Search/Select
"HOT KEY REG".
Search/Select
desired dialling
button number.*2
5
Search/Select
"YES".
Dialling with Hot Key
Press TALK.
Clearing the Hot Key Registration
and hold the dialling
1 Press
button registered as
a hot key.
2
3
Press RIGHT.
4
Select "CLEAR".
Search/Select
"YES".*3
any time.
• To exit the operation, press
*1 If there is no item stored in the phonebook, the display shows "NO ITEM".
*2 The number is flashing if the dialling button is already assigned as a hot key.
*3 Phonebook registration will be remained even hot key registration is cleared.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
17
Cordless Telephone
1 Press and hold the dialling button registered as a hot key. 2
410E.book Page 18 Wednesday, March 26, 2003 1:49 PM
Handset Settings
: Time Alarm
Before programming, please follow steps 1 to 3.
You must set the clock before setting the time alarm.
1
Press MENU.
2
Search/Select
"SETTING HS".
3
Search/Select
"TIME ALARM".
Setting Alarm Time
4
5
Search/Select
"SET TIME".
6
Time
Enter time.
4-digit
(24 hour clock).
7
Press OK.
Search/Select
"OFF",
"ONCE" or
"REPEAT DAILY".
Setting Time Alarm On/Off
4
5
Search/Select
"SET ALARM".
Search/Select
"OFF",
"ONCE" or
"REPEAT DAILY".
• To exit the operation, press
any time.
To stop time alarm: Time alarm will sound for 3 minutes. When the alarm sounds, press
any dialling buttons or key. Alarm stops and display returns to the standby mode.
If "ONCE" is selected, the setting is turned off. When in talk or intercom mode, the alarm
will not sound until the call is ended.
18
410E.book Page 19 Wednesday, March 26, 2003 1:49 PM
Handset Settings
: Ringer Option
Before programming, please follow steps 1 to 3.
1
2
Press MENU.
3
Search/Select
"SETTING HS".
Search/Select
"RINGER OPT".
Setting the Ringer Volume
The choices are 6 levels and off.
4
5
Search/Select
"RINGER VOL".
Search/Select
desired ringer volume.
Cordless Telephone
• If "RINGER OFF" is selected,
is displayed.
Setting the Ringer Pattern for External Call/Internal Call/Paging/Alarm
There are 20 patterns available on each ringer.
4
5
Search/Select
"EXT RINGER",
"INT RINGER",
"PAGING" or
"ALARM".
Search/Select
desired ringer pattern.*1
• To exit the operation, press
any time.
• Each ringer will start ringing with lower volume then gradually increase the volume
when receiving a call.
*1 If you select one of the melody ringer patterns, it keeps ringing for 10 seconds even
if a caller hangs up a call. Therefore, you may hear dial tone or no one there after you
answer a call.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
19
410E.book Page 20 Wednesday, March 26, 2003 1:49 PM
Handset Settings
: Tone Option
You can set the following sounds on or off.
Key Tone "KEY TONE": Key tone will sound when you press any key, and a
confirmation tone and an error tone will be heard during operation.
Call Waiting Tone "CALL WAITING": Call waiting tone will sound when an incoming
external call is received during an intercom call.
Range Warning Alarm "RANGE ALARM": Alarm will sound when you move out of range
of a base unit.
Battery Low Alarm "BATTERY LOW": Alarm will sound when the batteries need to be
charged.
1
2
Press MENU.
3
Search/Select
"SETTING HS".
4
Search/Select
"TONE OPT".
Search/Select
"KEY TONE",
"CALL WAITING",
"RANGE ALARM" or
"BATTERY LOW".
5
Search/Select
"ON" or "OFF".
• To exit the operation, press
any time.
: Display Option
Selecting the Standby Mode Display
1
2
Press MENU.
4
3
Search/Select
"SETTING HS".
Search/Select
"DISPLAY OPT".
Search/Select
"STANDBY MODE".
5
Search/Select
"CLOCK",*1
"OFF",
"BS NO"(Base unit number) or
"HS NO"(Handset number).
any time.
• To exit the operation, press
*1 Time will only be displayed if the clock has been set. When new calls have been
received, the display shows the number of new call.
20
410E.book Page 21 Wednesday, March 26, 2003 1:49 PM
Handset Settings
Before programming, please follow steps 1 to 3.
1
2
Press MENU.
3
Search/Select
"SETTING HS".
Search/Select
"DISPLAY OPT".
Selecting the Talk Mode Display
Even if you select "PHONE NO", the other party’s phone number will not appear on your
display when you receive calls without subscribing to a Caller ID service.
4
Search/Select
"TALK MODE".
5
Search/Select
"TALK TIME"(Length of the call) or
"PHONE NO"(Phone number).
Selecting the Display Language
Search/Select
"LANGUAGE".
5
Search/Select
desired language.*1
any time.
• To exit the operation, press
*1 You can select one of 10 languages.
If you set a language you cannot read, reset the handset to its initial settings.
Press MENU DOWN RIGHT UP RIGHT 4-digit Handset PIN UP OK
All handset setting will be reset to their initial settings (p.26), however, the Phonebook
data will be saved.
: Call Option
Call BAR On/Off
This allows you to make an emergency and internal call.
1
2
Press MENU.
5
4-digit
Handset PIN*1
3
Search/Select
"SETTING HS".
4
Search/Select
"CALL OPT".
Search/Select
"CALL BAR".
6
Search/Select
"ON" or "OFF".*2
• To exit the operation, press
any time.
*1 The factory preset is 0000.
*2 If "ON" is selected,
is displayed.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
21
Cordless Telephone
4
410E.book Page 22 Wednesday, March 26, 2003 1:49 PM
Handset Settings
Before programming, please follow steps 1 to 3.
1
2
Press MENU.
3
Search/Select
"SETTING HS".
Search/Select
"CALL OPT".
Setting the Direct Call Number
After a direct call number has been set and on, you can dial the direct call number only
by pressing TALK. Incoming calls are accepted.
4
5
Phone Number
Enter the direct
call number. (max. 24 digits)
Search/Select
"DIRECT NO".
6
Press OK 3 times.
Setting the Direct Call On/Off
4
5
Search/Select
"SET DIRECT".
Search/Select
"ON" or "OFF".*1
• To exit the operation, press
*1 If "ON" is selected,
any time.
is displayed.
: Other Options
Changing Handset PIN
The factory preset is 0000. Once you have programmed the handset PIN, you
cannot confirm it. We recommend you write down the handset PIN. If you forget
it, please consult our Panasonic Customer Care Helpline. U.K. 08700 100 076
R.O.I. 01289 8333
1
2
Press MENU.
5
Current 4-digit
Handset PIN
Search/Select
"OTHER OPT".
Search/Select
"HSPIN CHANGE".
4-digit Handset
4-digit
6 New
7 New
PIN again to verify
Handset PIN
• To exit the operation, press
22
4
3
Search/Select
"SETTING HS".
any time.
410E.book Page 23 Wednesday, March 26, 2003 1:49 PM
Handset Settings
Key Lock
You can lock the handset dialling buttons. Only incoming calls are accepted while the
key lock is on. The key lock is cancelled if the handset is turned off.
When the key lock is on, emergency calls cannot be made until key lock is
cancelled.
Key Lock On
Key Lock Off
Press OK for more
than 2 seconds.
•
Press OK for more
than 2 seconds.
is displayed and all dialling buttons are locked.
Recall Feature
Dialling Pause (for PBX line/long distance service
users)
A dialling pause is used when a pause in the dialling of the phone number is necessary
using a PBX or accessing a long distance service.
For example, when 9 (line access number) is dialled followed by a pause to access an
outside line through a PBX:
1
9
2
3 Phone Number 4
Press PAUSE.*1
Press TALK.
• Entering a pause prevents misdialling when you redial or dial a stored number.
• Pressing PAUSE once creates one pause. To extend the pause requirement time,
press PAUSE accordingly.
*1
is displayed on the LCD.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
23
Cordless Telephone
RECALL is used to access special telephone services. Contact your Network provider
for details. If your unit is connected to a PBX, pressing RECALL allows you to access
some features of your host PBX such as transferring an extension call.
410E.book Page 24 Wednesday, March 26, 2003 1:49 PM
Base Unit Setings
Before programming, please follow steps 1 to 2.
1
2
Press MENU.
"INPUT CODE"
Search/Select
"SETTING BS".
Changing Base Unit PIN
The factory preset is 0000. Once you have programmed the base unit PIN, you
cannot confirm it. We recommend you write down the base unit PIN. If you forget
it, please consult our Panasonic Customer Care Helpline. U.K. 08700 100 076
R.O.I. 01289 8333
3 5 4 Current 4-digit Base Unit PIN 5 New 4-digit Base Unit PIN
6 New 4-digit Base Unit PIN again to verify
Call Restriction
You can restrict selected handset(s) from dialling selected phone numbers. You can
assign up to 10 call restriction numbers (up to 8 digits). If you dial a restricted number,
the call does not connect and restricted number flashes.
3
6
Base
4 4-digit
Unit PIN*1
5 Handset Number
Select desired handset.*2
7 Phone Number 8
Enter phone
number to be
restricted.
(up to 8 digits)
6
9
Press RIGHT.
Press RIGHT.
Press OFF.
OR
To continue entering call
restriction numbers, repeat
the steps 7 to 8.
(up to 10 numbers)
Cancelling Call Restricted Handset(s)
3
6
Base
4 4-digit
5 Handset
Unit PIN*1
Number
Select desired
handset.*3
any time.
• To exit the operation, press
*1 The factory preset is 0000.
*2 The selected handset number flashes.
*3 The selected handset(s) will stop flashing.
24
6
7
Press RIGHT.
Press OFF.
410E.book Page 25 Wednesday, March 26, 2003 1:49 PM
Base Unit Settings
Before programming, please follow steps 1 to 2.
1
2
Press MENU.
"INPUT CODE"
Search/Select
"SETTING BS".
Cancelling Call Restricted Number
3
6
4 4-digit Base Unit PIN*1 5
6
Press RIGHT
repeatedly until
desired call restriction
number is displayed.
7
8
OR
Press CLEAR.
<to finish>
Press OFF.
Time Break/Earth Recall
An earth relay can be installed as an option depending on your PBX requirements.
Please consult our Panasonic Customer Care Helpline for installation. On installation,
you can then select the time break recall or earth mode to suit your PBX or Network
provider.
3
3
4
4-digit
Base Unit
PIN*1
5
2
1 Time Break Recall *2
6
OR
2 Earth Recall
7
Press OK.
Pause Timing
You can set the pause timing to 3 or 5 seconds, depending on your PBX requirements.
3
3
4
4-digit
Base Unit
PIN*1
5
3
• To exit the operation, press
*1 The factory preset is 0000.
*2 "1-2" stands for 80 msec.
6
1 3 Seconds
OR
2 5 Seconds
7
Press OK.
any time.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
25
Cordless Telephone
Press RIGHT.
<to continue>
Repeat the
steps 5 to 7.
C
410E.book Page 26 Wednesday, March 26, 2003 1:49 PM
Initial Settings
: Reset Handset
You can reset all of the handset settings to their initial settings.
1
2
Press MENU.
3
Search/Select
"SETTING HS".
4 4-digit Handset PIN*1
Search/Select
"RESET HS".
5
Search/Select
"YES" or "NO".
• To exit the operation, press
any time.
*1 The factory preset is 0000.
Handset Initial Settings
Function
Time Alarm Mode
Alarm Time
Handset Ringer Volume
Handset External Ringer Pattern
Handset Internal Ringer Pattern
Handset Paging Tone Pattern
Handset Alarm Tone Pattern
Key Tone
Call Waiting Tone
Range Warning Alarm
Battery Low Alarm
Standby Mode Display
Talk Mode Display
Display Language
Call BAR
Direct Call Mode
Direct Call Number
4-Digit Handset PIN
Auto Talk
Base Unit Access
Redial Memory
Handset Receiver Volume
26
Initial Setting
OFF
Clear
6
1
1
1
1
ON
ON
OFF
ON
Clock
Length of the Call
English
OFF
OFF
Clear
0000
OFF
Automatic Base Unit Access
All Clear
Medium
410E.book Page 27 Wednesday, March 26, 2003 1:49 PM
Initial Settings
Reset Base Unit Settings
If the base unit is reset, the Caller ID list will clear.
1
Press MENU.
2
"INPUT CODE"
Search/Select
"SETTING BS".
4 4-digit Base Unit PIN*1 5
• To exit the operation, press
3
0
Press 0.
Press OK.
any time.
*1 The factory preset is 0000.
Base Unit Initial Settings
Function
Initial Setting
All Handsets
3
Time Break Recall
3 seconds
All Clear
All Clear
0000
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
Cordless Telephone
Ringer Mode
Number of Rings
Earth/Time Break Recall
Pause Timing
Call Restricted Handsets
Call Restriction Numbers
4-Digit Base Unit PIN
27
410E.book Page 28 Wednesday, March 26, 2003 1:49 PM
Multi-unit User Operation
: Handset Registration to a Base Unit
Handset Registration
The handset supplied with the base unit is already registered. If an optional handset is
purchased, it must be registered. Additional KX-A142E handsets are available to
purchase separately. Up to 6 handsets can be registered to a single base unit. Using
additional handsets allows you to have an intercom call while simultaneously conducting
a call to an outside line.
Handset must be registered within 1 minute after pressing PAGE button. If over 1
minute, press
then start over again.
Charge the optional handset batteries for 7 hours before initial use.
1
2
Press MENU.
4
5
Press
RIGHT.
3
Search/Select
"SETTING HS".
"REGISTER HS"
Search/Select
"REGISTRATION".
Press and hold
on the Base Unit
(for about 10 seconds) until the green indicator flashes.
If all registered handsets start ringing (Paging),
press
to stop paging then start over again.
7
6
Search/Select desired
base unit number
available to register
the handset.
4-digit Base
Unit PIN after
"BS PIN" is
displayed.*1
8
Press OK.
When a handset is
registered successfully,
a confirmation tone
sounds and " "
icon lights.
any time.
• To exit the operation, press
*1 The factory preset is 0000.
KX-A142E Handset: You can see the illustrations for answering system feature on
additional KX-A142E handset body, but KX-TCD410E does not have an answering
system feature. Therefore, the answering system does not work even if KX-A142E
handset has been registered to KX-TCD410E.
28
410E.book Page 29 Wednesday, March 26, 2003 1:49 PM
Multi-unit User Operation
Cancelling a Base Unit
You can cancel any base unit that your handset is registered to.
1
2
3
Search/Select
"SETTING HS".
Press MENU.
4
Search/Select
"REGISTRATION".
5 4-digit Handset PIN*1 6
Search/Select
desired base unit
number to cancel.*2
Search/Select
"CANCEL BS".
7
8
Search/Select
"YES"or"NO".
Press RIGHT.
Cordless Telephone
Cancelling a Handset
Each handset can cancel itself or another handset.
1
Press MENU.
2
"INPUT CODE"
7
Search/Select
"SETTING BS".
4 4-digit Base 5
Unit PIN*1
3
Handset Number
Select desired handset.*3
6
Press OK.
Please wait until
"SETTING BS"
is displayed.
any time.
• To exit the operation, press
*1 The factory preset is 0000.
*2 The selected base unit number flashes.
*3 The selected handset number flashes.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
29
410E.book Page 30 Wednesday, March 26, 2003 1:49 PM
Multi-unit User Operation
Before programming, please follow steps 1 to 4.
1
Press
MENU.
2
"INPUT CODE"
3
Search/Select
"SETTING BS".
1
4 4-digit
Base Unit
PIN*1
Ringer Mode Selection;
Setting the All Handsets Mode
5
6
1
"All handsets" mode.
Press OK.
Setting the Selected Handsets Mode
5
2
"Selected handsets"
mode.
6 Handset Numbers*2 7
Press desired
handset numbers.
Press OK.
Setting the Selected then All Handsets Mode
The specific handset(s) will ring for a selected number of rings.
If not answered, all handsets will ring.
5
3
"Selected then all
handsets" mode.
6 Handset Numbers*2 7
8 Number of Rings*3
Press desired
handset numbers.
Select how many times
it rings. (up to 6 rings)
9
Press RIGHT.
Press OK.
any time.
• To exit the operation, press
• The factory preset is in shade.
*1 The factory preset is 0000.
*2 The selected handset number flashes.
*3 Press dialling button 1 through 6 to enter the number of rings.
30
410E.book Page 31 Wednesday, March 26, 2003 1:49 PM
Multi-unit User Operation
: Base Unit Selection
When Automatic Base Unit Access is selected, if you move outside of the radio range of
the current base unit the handset automatically searches for other registered bases.
When a specified base unit is selected, the handset will access that base unit only. Calls
(both incoming and outgoing) can be conducted only via the selected base unit, even if
the radio cells overlap with neighbouring base units.
1
2
Press MENU.
3
4
Search/Select
"SETTING HS".
• To exit the operation, press
Search/Select
"SELECT BS".
Search/Select
"AUTO" or specific
base unit number.
any time.
C
1
C
1
2
3
4
5
6
7
8
9
4
7
2
3
5
6
8
9
C
1
0
R
4
INT
0
7
R
2
3
5
6
8
9
INT
1
0
2
R
INT
4
C
1
4
7
2
3
5
6
8
9
0
C
R
INT
1
4
7
3
2
3
5
6
8
9
0
R
INT
5
Radio Cell
Eg.
Additional
handsets
(KX-A142E)
registered with
2 base units.
Note: Calls are disconnected when the handset moves from one radio cell to
another.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
31
Cordless Telephone
Operating Additional Base Units: You can register and operate your handset with up
to 4 base units. Each base unit forms 1 radio cell. If the individual bases are linked to the
same telephone line then you can extend the operating range of the system by
positioning the bases so that the two radio cells overlap. If the handset is set to AUTO
base selection, then in standby mode the handset will automatically swap to the second
base if the range on the first base is exceeded. It is not possible to transfer calls between
bases (only between handsets linked to the same base unit).
410E.book Page 32 Wednesday, March 26, 2003 1:49 PM
Intercom
Intercom between Handsets
You can use your handsets as a 2-way intercom.
For example, when Handset 1 calls Handset 2. To hang up, press
.
<Handset 1>
1
(
INT
on the display)
Press INTERCOM.
2
2
Press desired
Handset Number.
3
<Handset 2>
Press TALK.*1
• Intercom calls can be conducted within the radio cell of the current base unit, but not
with units in neighbouring radio areas.
Transferring a Call to Another Handset/Conference Call
Intercom can be used during a call to transfer an external call between handsets that are
registered to the same base unit. For example, when handset 1 transfers a call to
Handset 2. To hang up, press
.
<Handset 1>
(During a call)
1
INT
Press INTERCOM.
(
on the display)
2
4
2
3
*3
Press desired
Handset Number.*2
<Handset 2>
3
Press TALK.*1
*1 You can also press any dialling button, INTERCOM, t or x.
*2 If you press
after pressing desired handset number, a call can be transferred to
another handset without speaking to another handset.
If the transferred call is not answered within 30 seconds, Handset 1 will ring again.
*3 When Handset 2 answers a call transferred, press
to complete a call transfer or
press dialling button 3 to establish the conference call.
32
410E.book Page 33 Wednesday, March 26, 2003 1:49 PM
Before Requesting Help
If you experience any problems with the normal use of your apparatus, you should
unplug it from the telephone outlet and connect a known working telephone in its place.
If the known working telephone still has problems, then please contact the customer
service department of your Network provider.
If it operates correctly, then the problem is likely to be a fault in your apparatus.
In this case, contact your supplier for advice. Your Network provider may charge you if
they attend a service call that is not due to apparatus supplied by them.
Turn the power OFF then ON (Handset) / Disconnect then connect the AC adaptor
(Base unit).
Problem
Possible cause
Solution
NO LCD display in handset.
• Handset not turned on.
• Turn on power (p.9).
Handset will not turn on.
• Batteries not inserted.
• Insert the 2 rechargeable
• Batteries not charged.
• Place handset in base and
• Dirty charge contact.
• Clean charge / battery
• Base not powered up.
• Connect AC adaptor to
• Handset not registered to
• Register handset to base.
Batteries charge icon not
counting up.
icon flashes.
Handset busy tone heard
when
is pressed.
• Handset out of range of
base.
• Another handset in use.
• Telephone line not
No dial tone.
connected.
connect AC adaptor to base
and AC outlet (full charge
period 7 hrs).
contact and retry charge.
base unit and AC outlet.
• Move handset closer to
base.
• Connect AC adaptor to
base unit and AC outlet.
• Move handset closer to
base.
• Wait for the other user to
complete call.
• Insert telephone cord to
network.
• Turn power OFF then ON.
• Call BAR set.
• Turn feature off.
• Particular dialled number is • Remove number from call
Cannot dial out.
restricted.
Handset will not ring.
restricted list.
• Key lock mode ON.
• Turn key lock OFF.
• Ringer switched off.
• Set ringer to one of 6
volume levels.
(see "Handset Settings".)
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
33
Useful Information
base.
• Handset out of range of
base.
• No power into base unit.
batteries supplied (p.4).
410E.book Page 34 Wednesday, March 26, 2003 1:49 PM
Before Requesting Help
Problem
Possible cause
Solution
Last number redial does not
work.
• Number exceeded 24 digits. • Redial manually.
No Caller ID number
displayed.
• Service not supplied.
• Caller has withheld info.
• Caller ID service must be
icon flashes
• Battery low.
• Recharge batteries.
icon is disappeared
• Wrong battery type
• Set the correct battery type.
Cannot register handset to
base.
34
selected.
• Max. number of bases
arranged with Network
provider.
• Delete unused base
already registered to
registrations from handset.
handset.
• Max. number of handsets • Delete unused handset
already registered to base
registrations from base.
unit.
• Wrong PIN number entered • If PIN number is lost,
(Default 0000).
contact the Panasonic
Customer Care Helpline.
• Electrical noise in local
• Move base/handset away
area.
from sources of electrical
noise (e.g TV, radio ).
410E.book Page 35 Wednesday, March 26, 2003 1:49 PM
Technical Information
Specifications
Standard:
Number of channels:
Frequency range:
Duplex procedure:
Channel spacing:
Bit rate:
Modulation:
RF Transmission Power:
Voice coding:
Power source:
Power consumption, base unit:
Operating conditions:
Dimensions, Base Unit:
Dimensions, Handset:
DECT=(Digital Enhanced Cordless
Telecommunications)
GAP=(Generic Access Profile)
120 Duplex Channels
1.88 GHz to 1.9 GHz
TDMA (Time Division Multiple Access)
1728 kHz
1152 kbit/s
GFSK
approx. 250 mW
ADPCM 32 kbit/s
AC Adaptor 220 - 240 V, 50 Hz
5 VA
5 - 40 °C, 20 - 80 % relative air humidity (dry)
About (58 mm x 128 mm x 105 mm) x 170 g
About (143 mm x 48 mm x 32 mm) x 120 g
• Specifications are subject to change.
• The illustrations used in this manual may differ slightly from the original device.
Connections: The telephone will not work during a power failure. We therefore
recommend you use a standard telephone and T Adaptor to connect this Digital
Cordless Phone to the line. Your Panasonic Sales Shop can offer you more information
about connection possibilities.
Useful Information
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
35
410E.book Page 36 Wednesday, March 26, 2003 1:49 PM
Index
AC Adaptor .......................................... 2, 4
Accessories.............................................. 2
Answering Calls ..................................... 13
Auto Talk ................................................ 13
Base Unit
Initial Settings.................................... 26
PIN .................................................... 30
Reset................................................. 26
Selection ........................................... 31
Battery
Caution................................................ 3
Charge ................................................ 5
Installation........................................... 4
Life ...................................................... 5
Battery Low Alarm.................................. 20
Call Restriction
Cancelling Call Restricted
Handset(s) ........................................ 30
Cancelling Call Restricted Number ... 24
Call Waiting ............................................ 11
Caller ID List
Calling Back ...................................... 12
Clearing............................................. 12
Editing ............................................... 12
Storing............................................... 16
Calls
Answering ........................................... 9
Making .......................................... 9, 10
Redialling .......................................... 10
Terminating ......................................... 9
Cancelling a Base Unit........................... 28
Cancelling a Handset ............................. 28
Clock/Date................................................ 9
Conference Call ..................................... 32
Dialling Pause ........................................
Direct Call Number.................................
Display
Standby Mode...................................
Talk Mode .........................................
23
22
20
21
Guarantee .............................................. 37
36
Handset
Display ................................................ 7
Initial Settings ................................... 25
Locator.............................................. 13
Paging............................................... 13
PIN.................................................... 22
Registration....................................... 27
Reset ................................................ 25
Ringer ............................................... 19
Intercom................................................. 32
Key
Lock .................................................. 23
Tone.................................................. 20
Making Calls
Redialling .......................................... 10
with the Phonebook .......................... 15
Phonebook
Hot Key ............................................. 17
Storing .............................................. 14
Power On/Off ........................................... 9
Range Warning Alarm ...........................
Recall .....................................................
Receiver Volume ...................................
Ringer Pattern........................................
Ringer Volume .......................................
20
23
13
19
19
Setting up................................................. 4
Specifications......................................... 35
Time Alarm ............................................ 18
Time Break/Earth Recall........................ 24
Tone Option ........................................... 20
Wall Mounting .......................................... 8
410E.book Page 37 Wednesday, March 26, 2003 1:49 PM
Guarantee
CONDITIONS OF GUARANTEE
This guarantee is in addition to and does not in any way affect any statutory or other rights of
consumer purchasers. If within the applicable guarantee period, the appliance proves to be
defective by reason of faulty design, workmanship or materials, we undertake subject to the
following conditions to have the defective appliance (or any part or parts there of) repaired or
replaced free of charge.
1. The appliance shall have been purchased and used solely within either the UK or ROI and
in accordance with standard operating instructions and the technical and/or Safety
Standards required in the UK.
2. The appliance should be returned together with this guarantee and proof of date of
purchase promptly on being found defective at the purchaser's risk and expense to the
authorised dealer from whom the appliance was purchased or to the nearest authorised
dealer. All enquires must be through such dealers.
3. This guarantee shall not apply to damage caused through fire, accident, lightning, misuse,
wear and tear, neglect, incorrect adjustment or repair, to damage caused through
installation, adaption, modification or use in an improper manner or inconsistent with the
technical and/or safety standards required in the country where this appliance is used, or
to damage occurred during transit to or from the purchaser.
4. If at any time during the guarantee period any part or parts of the appliance are replaced
with a part or parts not supplied or approved by us or of an objective quality safe and
suitable for the appliance, or the appliance has been dismantled or repaired by any person
not authorised by us, we shall have the right to terminate this guarantee in whole or in part
immediately without further notice.
5. The purchaser's sole and exclusive remedy under this guarantee against us is for the
repair or replacement of the appliance or any defective part or parts and no other remedy,
including, but not limited to, incidental or consequential damage or loss of whatsoever
nature shall be available to the purchaser.
6. This guarantee shall not apply to batteries and any other items of limited natural life.
7. Our decision on all matters relating to complaints shall be final. Any appliance or defective
part which has been replaced shall become our property.
8. The guarantee period applicable to this product shall be 12 months.
Useful Information
Please keep these Operating Instructions with your receipt.
Panasonic Business Systems U.K.
Receipt No.
Date of Purchase
Model No. KX-TCD410E
Serial No.
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333
37
410E.book Page 38 Wednesday, March 26, 2003 1:49 PM
410E.book Page 39 Wednesday, March 26, 2003 1:49 PM
410E(03).fm Page 40 Wednesday, March 26, 2003 3:39 PM
Hereby, Panasonic Communications Co., Ltd., declares that this Dect Cordless Telephone is
in compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
A copy of the manufacturer's declaration of conformity to the essential requirements of the
R&TTE Directive is available at the following web address:
http://doc.panasonic-tc.de
For your future reference
Serial No.
(found on the bottom of the unit)
Date of purchase
Name and address of dealer
Attach or keep original receipt to assist with any repair under warranty.
Customer Care Helpline Tel. No.:
U.K. 08700 100 076
R.O.I. 01289 8333
0436
1999/5/EC
This equipment is designed for use on the United Kingdom only.
In the event of problem, you should contact your equipment supplier in the first
instance.
Technical specifications are subject to change.
Sales Department:
Panasonic Business Systems U.K.
Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP
Panasonic Communications Co., Ltd.
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
PQQX13445YA
D0303NR1033