Specifications | Fujitsu fi-5750C Photo Scanner User Manual

CONTENTS
Introduction
fi-5750C Image Scanner Operator's Guide
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
P3PC-E747-01EN
CONTENTS
Introduction
Introduction
Regulatory Information
Trademarks
Thank you for purchasing the fi-5750C Image Scanner.
The fi-5750C is a high-performance Duplex Color scanner product, equipped with ADF (Automatic Document Feeder) for automatically
scanning documents and Flatbed for manual scanning.
Note, Liability
Preface
Features:
●
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
●
●
●
180-degree rotatable ADF - you can set documents from various directions.
High resolution and high speed scanning - 55ppm/110ipm (A4 portrait, 200dpi)
Large scanning area - 304.8mm x 457.2mm(12in x 18in) Max
Small installation space with movable ADF.
>> Contents Map
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS MAP
Introduction
Regulatory Information
Trademarks
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
1.1 Names and functions of parts
1.2 Functions of the operator
panel
2 BASIC SCANNER OPERATION
2.2 Setting the ADF
2.3 Loading documents onto the 2.4 Scanning document using
2.5 Scanning documents
ADF
the Flatbed
3.1 Scanning double sided documents
3.2 Scanning documents with
different widths
3.3 Scanning document longer
than A3 size
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed
documents
4.2 Cleaning the ADF
4.3 Cleaning the Flatbed
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6.2 Indications of operator panel
for errors
6.3 Items to check before
6.4 Checking labels on the
contacting the dealer where you
scanner
bought the scanner
7.1 Online setup
7.2 Double-feed detection
7.3 Setting edge erasing
7.4 Setting dropout color
7.6 Resetting the consumable counters
7.7 Adjusting the offset
7.8 Adjusting the scan scale
7.9 Power saving
8.2 Document quality
8.3 Maximum ADF capacity
8.4 Area not to be perforated
10.2 Installation specification
10.3 External dimensions
Appendix 2 Glossary
Items to check
2.1 Turning the scanner ON/OFF
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.4 Saving scanned images
in PDF format
3.5 Selecting a color to drop out
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
6 TROUBLESHOOTING
6.1 Removing jammed documents
7 ONLINE SETUP
7.5 Setting of pre-pick mode
8 DOCUMENT SPECIFICATION OF ADF
8.1 Document size
9 OPTIONS
9.1 Additional memory board
10 SCANNER SPECIFICATIONS
10.1 Basic Specification
Appendix
Appendix 1 "Scan" button and "Send to" button
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
Trouble Shooting
8.5 Double feed detection
conditions
CONTENTS
Regulatory Information
Introduction
Regulatory Information
FCC declaration
Trademarks
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
●
●
2 BASIC SCANNER OPERATION
●
●
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
FCC warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
ATTENTION
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is located.
Consult your dealer or an experienced radio/TV technician.
●
●
The use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.
The length of the AC cable must be 3 meters (10 feet) or less.
7 ONLINE SETUP
1|2|3|4
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Regulatory Information (Continued from the previous page)
Introduction
Regulatory Information
Canadian DOC Regulations
Trademarks
This digital apparatus does not exceed the Class B limit for radio noise emission from digital apparatus set out in the Radio interference
Regulations of the Canadian Department of Communications.
This Class B digital apparatus complies with Canadian ICES-003.
Le pésent appareil numérique n'ément pas de bruits radioélectriques dépaassant les limites applicables aux appareils numériques de la
classe B prescridtes dans le Réglesment sur le brouillage radioélectrique dicté par le ministere des Communications du Canada.
Cet appareil numérique de la classe B est conformme á la norme NMB-003 du Canada.
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
Bescheinigung des Herstellers / Importeurs
2 BASIC SCANNER OPERATION
Hiermit wird bescheinigt, daß der/die/das
fi-5750C
In Übereinsstimmung mit den Bestimmungen der EN45014(CE) funkentstört ist.
Laut Maschinenlärminformationsverordnung 3. GS GV, 18.01.1991:Der höchste Schalldruckpegel beträgt 70 dB (A) oder weniger gemäß
ISO/7779.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
1|2|3|4
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Regulatory Information (Continued from the previous page)
Introduction
Regulatory Information
International ENERGY STAR® Program
Trademarks
As an ENERGY STAR® Partner, PFU LIMITED has determined that this product meets the ENERGY STAR® guidelines for energy
efficiency.
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
The International ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the
penetration of energy efficient computers and other office equipment. The program backs the development and dissemination of products
with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The
targeted products are office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their
standards and logos are uniform among participating nations.
4 DAILY CARE
1|2|3|4
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Regulatory Information (Continued from the previous page)
Introduction
Regulatory Information
Use in High-safety Applications
Trademarks
1 NAMES AND FUNCTIONS OF PARTS
This product has been designed and manufactured on the assumption that it will be used in office, personal, domestic, regular industrial, and
general-purpose applications. It has not been designed and manufactured for use in applications (simply called "high-safety applications"
from here on) that directly involve danger to life and health when a high degree of safety is required, for example, in the control of nuclear
reactions at nuclear power facilities, automatic flight control of aircraft, air traffic control, operation control in mass-transport systems, medical
equipment for sustaining life, and missile firing control in weapons systems, and when provisionally the safety in question is not ensured. The
user should use this product with adopting measures for ensuring safety in such high-safety applications. PFU LIMITED assumes no liability
whatsoever for damages arising from use of this product by the user in high-safety applications, and for any claims or compensation for
damages by the user or a third party.
2 BASIC SCANNER OPERATION
About the use of mercury
3 SCANNING VARIOUS TYPES OF DOCUMENTS
The scanner lamp contains mercury.
To avoid unexpected injury, read the following carefully.
Doing the following actions may result in serious personal injuries:
Note, Liability
Preface
Safety Precautions
4 DAILY CARE
5 REPLACING CONSUMABLES
●
●
6 TROUBLESHOOTING
7 ONLINE SETUP
●
Do not put the substance in the lamp in your mouth as it contains mercury.
Do not incinerate, crush, or shred the scanner.
Do not breathe the chemical liquid contained in the scanner parts.
Disposing of the scanner should be conducted as required by local ordinances or regulations.
1|2|3|4
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Trademarks
Introduction
Regulatory Information
Use in High-safety Applications
Trademarks
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Adobe, the Adobe logo, and Acrobat are either registered trademarks of Adobe Systems Incorporated in the United States and/or other
countries.
ISIS, QuickScan and their respective logos are trademarks or registered trade marks of Pixel Translations, a division of Captiva Software
Corporations in the United States.
Other product names are the trademarks or registered trademarks of the respective companies.
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
How Trademarks Are Indicated In This Manual
References to operating systems (OS) are indicated as follows:
Windows® 95:
Windows® 98:
Windows® Me:
WindowsNT® 4.0:
Windows® 2000:
Windows® XP:
Microsoft® Windows® 95 operating system.
Microsoft® Windows® 98 operating system.
Microsoft® Windows® Millennium Edition operating system.
Microsoft® WindowsNT® 4.0 Server operating system,
Microsoft® WindowsNT® 4.0 Workstation operating system.
Microsoft® Windows® 2000 Professional operating system.
Microsoft® Windows® XP Professional operating system,
Microsoft® Windows® XP Home Edition operating system.
Where there is no distinction between the different versions of the above operating system, the general term "Windows " is used.
1|2
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Trademarks (Continued from the previous page)
Introduction
Regulatory Information
Manufacturer
Trademarks
PFU LIMITED
Note, Liability
International Sales Dept., Imaging Business Division, Products Group
Preface
Solid Square East Tower, 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Kanagawa 212-8563, Japan
Safety Precautions
Phone : (81-44) 540-4538
1 NAMES AND FUNCTIONS OF PARTS
All Rights Reserved, Copyright© PFU LIMITED 2003
2 BASIC SCANNER OPERATION
1|2
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Note, Liability
Introduction
Regulatory Information
READ ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT. IF THIS PRODUCT IS NOT USED CORRECTLY,
UNEXPECTED INJURY MAY BE CAUSED TO USERS OR BYSTANDERS.
Trademarks
Note, Liability
Preface
Safety Precautions
While all efforts have been made to ensure the accuracy of all information in this manual, PFU assumes no liability to any party for any
damage caused by errors or omissions or by statements of any kind in this manual, its updates or supplements, whether such errors are
omissions or statements resulting from negligence, accidents, or any other cause. PFU further assumes no liability arising from the
application or use of any product or system described herein; nor any liability for incidental or consequential damages arising from the use of
this manual. PFU disclaims all warranties regarding the information contained herein, whether expressed, implied, or statutory.
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Preface
Introduction
Regulatory Information
Safety Precautions
Trademarks
Note, Liability
This manual describes important details for ensuring the safe and correct use of this product. Thoroughly read this manual before you start to
use this product. In particular, be sure to read and fully understand the Safety Precautions described in this manual before you use this
product.
Preface
Also, store this manual in a safe place so that it can be easily referred to during use of this product.
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
Warning Indications Used In This Manual
This manual uses the following indications to ensure safe and correct use of this product, and to prevent possible danger and injury to the
operator and other persons.
WARNING
This indication alerts operators to an operation that, if not strictly observed, may result in severe injury or death.
5 REPLACING CONSUMABLES
CAUTION
6 TROUBLESHOOTING
7 ONLINE SETUP
This indication alerts operators to an operation that, if not strictly observed, may result in safety hazards to personnel or damage to
equipment.
8 DOCUMENT SPECIFICATION OF ADF
1|2|3
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Preface (Continued from the previous page)
Introduction
Regulatory Information
Symbols Used In This Manual
Trademarks
This manual uses the following symbols in explanations in addition to warning indications.
Note, Liability
ATTENTION
Preface
This symbol alerts operators to particularly important information. Be sure to read this information.
Safety Precautions
HINT
1 NAMES AND FUNCTIONS OF PARTS
This symbol alerts operators to helpful advice regarding operation.
2 BASIC SCANNER OPERATION
A TRIANGLE symbol indicates that special care and attention is required. The drawing inside the triangle shows the specific caution.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
A CIRCLE with a diagonal line inside shows action which users may not perform. The drawing inside or under the circle shows the
specific action that is not allowed.
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
Outline characters on a colored background show instructions users should follow. It may also include the drawing that shows the
specific instruction.
7 ONLINE SETUP
1|2|3
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Preface (Continued from the previous page)
Introduction
Regulatory Information
Screen Examples In This Manual
Trademarks
The screen examples in this manual are subject to change without notice in the interest of product improvement.
Note, Liability
If the actual displayed screen differs from the screen examples in this manual, operate by following the actual displayed screen while
referring to the User's Manual of the scanner application you are using.
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
About Maintenance
The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to make repairs to this
product.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
1|2|3
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Safety Precautions
Introduction
Regulatory Information
WARNING
Trademarks
The following describes important warnings described in this manual.
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
Do not touch the AC cable with wet hands.
Do not touch the power plug with wet hands. Doing so might cause electric shock.
Do not damage the AC cable.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
A damaged AC cable may cause fire or electric shock. Do not place heavy objects on AC cables, or pull, bend, twist, heat, damage or modify
AC cables. Also, do not use damaged AC cables or power plugs, and AC cables or power plugs when the wall socket is loose.
Use only specified AC cables and connector cables
5 REPLACING CONSUMABLES
Use only specified AC cables and connector cables. Failure to use the correct cables might cause electric shock and equipment failure.
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
Use this scanner only at the indicated power voltage. Do not connect to multiple-power strips
Use this scanner only at the indicated power voltage and current. Improper power voltage and current might cause fire or electric shock. Also,
do not connect to multiple-power strips.
9 OPTIONS
Wipe any dust from the power plug.
10 SCANNER SPECIFICATIONS
Appendix
Wipe off any dust from metal parts on the power plug or metal fittings with a soft, dry cloth. Accumulated dust might cause fire or electric
shock. Do not install in locations subject to oil smoke, steam, humidity, and dust.
1|2|3|4|5
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Safety Precautions (Continued from the previous page)
Introduction
Regulatory Information
WARNING
Trademarks
The following describes important warnings described in this manual.
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
Do not install the scanner in locations subject to oil smoke, steam, humidity, and dust.
Doing so might cause a fire or electric shock.
Do not use the scanner if you smell strange odor.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
If you detect heat coming from the device or detect other problems such as smoke, strange smells or noises, immediately turn off the scanner
and then disconnect its power plug. Make sure that the smoking has stopped, and then contact the store where you bought the scanner or an
authorized FUJITSU scanner service provider.
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Turn the scanner OFF if it is damaged.
If the scanner is damaged for any reason, turn off the scanner and unplug the power cable before contacting the store where you purchased
the scanner.Do not put liquids inside the scanner.Do not insert or drop metal objects in to the scanner.Do not scan wet documents or
documents with paper clips or staples.Do not splash or allow the scanner to get wet.If foreign objects (water, small metal objects, liquids,
etc.) get inside the scanner, immediately turn off the scanner and disconnect the power plug from the power outlet, then contact the store
where you bought the scanner or the maintenance Service Center. Pay particular attention to this warning in households where there are
small children.
Do not touch the inside of the scanner unless necessary.
Do not take apart or modify the scanner. The inside of the scanner contains high-voltage components. Touching these components might
cause fire or electric shock.
1|2|3|4|5
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Safety Precautions (Continued from the previous page)
Introduction
Regulatory Information
CAUTION
Trademarks
The following describes important cautions described in this manual.
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
Do not install the scanner on unstable surfaces.
Install the scanner on a desk so that none of its parts protrude outside of the desktop. Also, make sure that the scanner is installed on a flat,
level surface. Do not install the scanner on unstable surfaces. Install the scanner on a level surface that is free of vibration to prevent it from
falling.Install the scanner on a strong surface that will support the weight of the scanner and other devices.
2 BASIC SCANNER OPERATION
Firmly insert the power plug.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Firmly insert the power plug into the power outlet as far it can go.
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
Do not block the ventilation ports.
Do not block the ventilation ports.Blocking the ventilation ports generates heat inside of scanner, which may results in fire or scanner failure.
Do not place heavy objects or climb on top of the scanner.
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Do not place heavy objects on the scanner or use the scanner's top surface for performing other work. Improper installation might cause
injuries.
Before moving the scanner, disconnect the power plug from the power outlet.
Appendix
Do not move the scanner with the power and interface cables connected as this might damage the cables, causing fire, electric shock or
injuries.Before moving the scanner, be sure to disconnect the power plug from the power outlet, and disconnect data cables. Also, make sure
that the floor is free of obstructions.
1|2|3|4|5
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Safety Precautions (Continued from the previous page)
Introduction
Regulatory Information
CAUTION
Trademarks
The following describes important cautions described in this manual.
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
Protect the scanner from static electricity.
Install the scanner away from strong magnetic fields and other sources of electronic noise. Also, protect the scanner from static electricity as
this might cause the scanner to malfunction. Do not use aerosol sprays near the scanner.
Do not use aerosol sprays to clean the scanner.
Aerosol sprays cause dirt and dust to enter the scanner, resulting scanner failure and malfunction.
Avoid any contact when scanner is in use.
5 REPLACING CONSUMABLES
Avoid touching any scanner mechanism when scanning as this may cause injuries.
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
Disconnect the power plug from the power outlet when the scanner is not used for a long period of time.
When the scanner is not used for a long period of time, be sure to disconnect the power plug from the power outlet for safety.
Do not install the scanner in the direct sunlight.
10 SCANNER SPECIFICATIONS
Appendix
Do not install the scanner in the direct sunlight or near heating apparatus.Doing so might cause excessive heat to build up inside the
scanner, causing fire or scanner trouble. Install the scanner in a well-ventilated location.
1|2|3|4|5
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Safety Precautions (Continued from the previous page)
Introduction
Regulatory Information
CAUTION
Trademarks
The following describes important cautions described in this manual.
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
Do not try to move or lift the scanner alone.
This scanner is heavy (77.2lbs/35kg). When you carry the scanner, ensure that additional personnel are used.
Before moving the scanner, make sure the shipping lock and ADF lock screws are locked.
2 BASIC SCANNER OPERATION
When moving the scanner, be sure to lock the shipping lock and ADF lock screws in order to prevent damages to the scanner.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
1|2|3|4|5
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Chapter 1 NAMES AND FUNCTIONS OF PARTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
This chapter describes names and functions of parts.
1.1 Names and functions of parts
1.2 Functions of the operator panel
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
1.1 NAMES AND FUNCTIONS OF PARTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1.1 Names and functions of parts
1.2 Functions of the operator panel
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
No.
Name
Function
1
Document cover
When closed, this cover fixes the document set on the reading position.
2
Document Bed
For scanning documents with the Flat bed, place the document here.
3
Document Holding Pad
It fixes the document by pressing it onto the document bed.
4
ADF Lock Screws
Used to fix the ADF. They are securing the ADF during transportation.
5
Screw Storage Holes
Holes in where the ADF Lock Screws are placed after unlocking the ADF.
6
Handle
Used to open/close the Document Cover.
1|2|3|4
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
1.1 NAMES AND FUNCTIONS OF PARTS (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1.1 Names and functions of parts
1.2 Functions of the operator panel
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
No.
Name
Function
7
Operator Panel
This panel consists of a Function No. display, four buttons and a LED.
8
ADF Paper Chute
For scanning documents with the Flat bed, place the document here..
9
Shipping Lock
Used to fix the carrier unit. It is securing the carrier during transportation.
10
ADF buttons
Press this button to open the ADF.
11
ADF (Automatic Document Feeder)
It transports a document to the reading position automatically. According to needs, this unit can
be set in three directions by turning and sliding it.
12
Stacker
Scanned documents are ejected from the ADF onto this tray. It is possible to change the height.
1|2|3|4
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
1.1 NAMES AND FUNCTIONS OF PARTS (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1.1 Names and functions of parts
1.2 Functions of the operator panel
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
No.
Name
Function
Appendix
13
EXT connector
Connector port for optional units.
14
USB interface connector
Used for connecting a USB interface cable from a PC.
15
SCSI interface connector
Used for connecting a SCSI interface cable from a PC.
16
SCSI ID switch
Used for setting SCSI ID (The setting at the factory shipment is ID=5).
17
Third Party Slot (Optional Slot)
The slot for an option board.
18
Side guide button
Used for adjusting the side guides.
19
Power inlet
Used for connecting a power cable from the power outlet..
20
Power switch
Used for turning ON/OFF the scanner.
1|2|3|4
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
1.1 NAMES AND FUNCTIONS OF PARTS (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1.1 Names and functions of parts
1.2 Functions of the operator panel
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
No.
Name
No.
Name
10 SCANNER SPECIFICATIONS
21
Chute Roller
26
Plastic Roller
22
Pick Arm
27
Sheet Guide
23
Pick Roller Set
28
Ultra Sonic Sensor
24
Brake Roller
29
Glass
25
Feed Roller
Appendix
1|2|3|4
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
1.2 Functions of the operator panel
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1.1 Names and functions of parts
1.2 Functions of the operator panel
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Name
Function
Function No. display
Indicates the function No. and error status.
Function
Buttons
Changes the Function activated by the Send to button.
Send to
Launches the linked application software.
Scan
LED
Lights when the scanner is turned ON.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Chapter 2 BASIC SCANNER OPERATION
Introduction
1 NAMES AND FUNCTIONS OF PARTS
This chapter describes how to scan various types of documents.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.1 Turning the scanner ON/OFF
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
When "|" of the power switch is pressed, the scanner is turned ON, and the green LED on the operator panel lights. During the initialization,
the indication of the Function No. display changes as follows: "8" > "P" > "0" > "1"
The indication "1" means that the operator panel is in the ready status. When turning off the scanner, press the "0" side of the power switch.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
The photograph shows an example of "Turning ON".
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.1 Turning the scanner ON/OFF (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Power Save Mode
2 BASIC SCANNER OPERATION
The Power Save mode keeps the scanner in a low-powered state if no operation is performed on the scanner for 15 minutes when it is ON.
The scanner is automatically switched to the Power Save mode.
2.1 Turning the scanner ON/OFF
In the Power Save mode, the indication of the Function No. display on the operator panel goes out, while the green LED is kept lit.
2.2 Setting the ADF
To return the scanner from the Power Save mode, perform one of the following operations:
2.3 Loading documents onto the ADF
●
2.4 Scanning document using the Flatbed
●
●
Load documents on the ADF paper chute.
Press any button on the operator panel.
Execute a command from the scanner driver.
2.5 Scanning documents
1|2
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.2 Setting the ADF
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Follow the procedure below to set or change the position of the ADF.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
As the factory default, ADF of fi-5750C is fixed with ADF lock screws. Be sure to remove the screws before changing the position of the ADF.
ADF can be set to the following three positions:
●
Appendix
●
●
Type 1: Traditional
-Traditional style of previous FUJITSU scanner products
-For operators accustomed to previous FUJITSU scanners
Type 2: Standard
- Small foot print
- For right-handed operators
Type 3: Reversed
- Small foot print
- For left-handed operators
ATTENTION
●
●
●
Please rotate the ADF after you set the stacker upright.
When you change the position of the ADF, do not rotate it over 180 degrees, otherwise the ADF may be damaged.
Make sure that the ADF is firmly locked when you changed its position.
CAUTION
●
Be careful not to pinch your fingers with the ADF .
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.3Loading documents onto the ADF
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
1. Confirm the following items before loading documents
❍ All the documents have the same width
❍ Check the number of sheets in the document stack.
The standard of number of sheets that can be loaded on the scanner is as follows:
2.2 Setting the ADF
A4-size paper or smaller:
20 mm or less.
2.3 Loading documents onto the ADF
Note: 200 sheets at in 80g/m2.
2.4 Scanning document using the Flatbed
Over A4-size paper:
10 mm or less.
2.5 Scanning documents
Note: 100 sheets at 80g/m2.
2.6 How to use the Scanner Driver
1|2|3|4|5|6
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.3 Loading documents onto the ADF (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2. Fan the documents
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
❍
❍
9 OPTIONS
❍
❍
Lightly grip both ends of the document, then bend and fan it.
Repeat this operation a couple of times.
Rotate the document 90 degrees, then bend and fan it again.
Align the edges of the documents.
10 SCANNER SPECIFICATIONS
Appendix
1|2|3|4|5|6
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.3 Loading documents onto the ADF (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
3. Load the documents onto the ADF paper chute.
Pull out the ADF paper chute extension according to the length of the document.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
For details on loading documents, refer to Chapter "8. DOCUMENT SPECIFICATION OF ADF".
1|2|3|4|5|6
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.3 Loading documents onto the ADF (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
4. Adjust the side guides to the width of the documents.
Move the side guides so that they contact both sides of the documents. If there is any space between the side guides and the edges
of documents, the scanned image may be skewed.
Set the documents face-down onto the ADF paper chute (so that the side to be scanned faces towards the ADF paper chute).
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
(1) Document, (2) Side Guide, (3) Side Guide button (both sides)
Appendix
ATTENTION
●
●
Please remove clips and staples from the document. When double-feeds or miss picking occurred, reduce the quantity of document.
When loading small documents onto the ADF paper chute, be careful not to touch the Chute roller cover for it may open while scanning
operation and your fingers may get caught.
1|2|3|4|5|6
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.3 Loading documents onto the ADF (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
5. Adjust the stacker extension according to the document size and raise the stopper.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
6. Adjust the position of the stacker.
The mount position of the stacker can be changed. The stacker is normally mounted on the Lower position. If you scan thin papers or
curl papers, you will remount the stacker to the upper position.
10 SCANNER SPECIFICATIONS
Appendix
Lower position
Upper position
ATTENTION
When the stacker is mounted on the upper position, the stacking capacity decreases (Around 100 sheets at 80g/m2).
1|2|3|4|5|6
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.3 Loading documents onto the ADF (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
6. With the movie below, review how to load the document onto the ADF:
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
1|2|3|4|5|6
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.4 Scanning document using the Flatbed
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
1. Open the document cover holding its handle.
ATTENTION
Confirm that there is no document on the ADF paper chute and the stacker.
2. Place the document face-down onto the document bed adjusting it to the reference lines.
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
3. Close the document cover carefully and start scanning.
10 SCANNER SPECIFICATIONS
Appendix
With the Flatbed, you can easily scan thick documents such as books and documents of non-standard sizes documents.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.5 Scanning documents
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1. Load documents onto the ADF paper chute. Pull out the ADF paper chute extension according to the length of the document. For
details on how to load documents, refer to "2.3 Loading documents onto the ADF".
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2. Start ScandAll 21.
Select [ Start ] - [ Program ] - [Scanner Utility for Microsoft Windows] and click [ScandAll 21].
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
This starts up ScandAll 21.
3. Select the scanner to use.
Select [Select Source] from the [Scan] menu.
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
The [Select Source] dialog box appears.
10 SCANNER SPECIFICATIONS
Select"FUJITSU fi-5750Cdj"(for Windows 95 and WindowsNT 4.0, select "FUJITSU TWAIN 32") and click the [Select] button.
Appendix
HINT
When the documents do not pile up on the Stacker tidily, set the Stacker to the higher position.
1|2|3
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.5 Scanning documents (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
4. Click the [Scan To View] button on the tool bar.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
The [TWAIN Driver] dialog box (for setting the scan conditions) appears.
2.4 Scanning document using the Flatbed
2.5 Scanning documents
5. Set the scan resolution, paper size, etc., and click the [Scan] button.
For details on settings in the [TWAIN Driver] dialog box, refer to "2.6 How to use the Scanner Driver".
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1|2|3
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
2.5 Scanning documents (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
The images of scanned documents are displayed on the [ScandAll 21] window.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
For details on different types of scanning, refer to "3 SCANNING VARIOUS TYPES OF DOCUMENTS". For details on functions and
operations of ScandAll 21, refer to "ScandAll 21 Help".
1|2|3
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2.6.1 FUJITSU TWAIN32 Scanner Driver
2 BASIC SCANNER OPERATION
FUJITSU TWAIN32 Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software
that complies with the TWAIN standard.
2.1 Turning the scanner ON/OFF
The following describes the procedure with examples of ScandAll 21 for ordinary scanning by using this driver software.
2.2 Setting the ADF
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11···29
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
1. Procedure for Basic Scanning Operation
1. Start up the application.
From the [Start] menu, select [Programs]-[Scanner Utility for Microsoft Window] and click [ScandAll 21].
2. Select your scanner on the window below.
Select [Select Source] from the [Scan] menu.
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11···29
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
3. Select the scanner to use, then click the [Select] button.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
Select
❍
❍
[FUJITSU fi-5750C] for FUJITSU TWAIN32 V9
or
[FUJITSU TWAIN32] for FUJITSU TWAIN32 V8
then click the [Select] button.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11···29
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
4. Load the documents on the scanner.
For details on loading documents, refer to "2.3 Loading Documents onto the ADF".
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
5. Open the TWAIN Driver window.
Select [Scan To View] from the [Scan] menu.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
[TWAIN Driver] dialog box appears.
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
HINT
ScandAll 21 provide scanning methods as follows:
●
●
3 SCANNING VARIOUS TYPES OF DOCUMENTS
●
●
4 DAILY CARE
●
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
●
[To View...] :Displays scanned images on the window.
[To File...:] :Saves scanned images as files (*.BMP, *.TIF, *.JPG).
[To FTP...:] :Transfers scanned images to a FTP server.
[To Adobe PDF...:] :Saves scanned images as PDF files.
(*Adobe Acrobat must be installed beforehand.)
[To Microsoft SharePoint Portal Server...] :Transfers scanned images to Microsoft Share Point Portal Server.
[To Mail...] :Launches mailer software and attaches scanned images to email.
For details, refer to "ScandAll 21 Help".
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11···29
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
6. Configure settings for scanning and click the [Scan] button.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
For details about the settings on this window, refer to "Setting Window for FUJITSU TWAIN32 Scanner Driver".
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11···29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
>>The images of scanned documents are displayed on the [ScandAll 21] window.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Depending on the settings of the application software, images may not be displayed. For details, refer to the documentation or Help file of
your application.
e.x.) When you select [To File...] from the [Scan] menu of ScandAll 21, images of scanned documents are not displayed on the window.
7. Save the scanned images.
Select [Save As...] from the [File] menu to save the scanned images.
If you wish to start another scanning, return to procedure 4.
8. End the application.
Select [Exit] from the [File] menu.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11···29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2. Setting Window for FUJITSU TWAIN32 Scanner Driver
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
You can perform settings for the FUJITSU TWAIN32 Scanner Driver on this window.
The following describes the main setting items.
●
For details on each functions, refer to "FUJITSU TWAIN32 Scanner Driver Help" (appears by pressing [Help] or [F1] button).
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11···29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Resolution
2 BASIC SCANNER OPERATION
Specifies the resolution of scanning.
It can be specified by selecting a default value from the list or customizing (specify any resolution in 1 dpi unit).
By marking the [Predefine] check box, you can select one from three predefined settings as [Normal], [Fine], [Super Fine] to scan documents
instead of setting details by yourself.
Otherwise, you can change the details of the predefined settings on the [Resolution Setting] window, which appears when you click on the
[...] button.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
Scan Type
2.6 How to use the Scanner Driver
Specifies the scanning method, the side(s) to be scanned (ADF Front Side, ADF Back Side, ADF Duplex, Flatbed) or details of Long page
( the size of documents longer than A3).
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
Paper Size
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
Select the size of documents to be scanned from this list.
Windows for customizing the paper size will appear when you click on [...] besides the list. You can save any document size as a customized
setting (up to three) or for changing the order of the paper size in the list.
7 ONLINE SETUP
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11···29
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Image Mode
2 BASIC SCANNER OPERATION
Specifies the image type for the scanned documents.
2.1 Turning the scanner ON/OFF
●
Black & White
Documents are scanned in binary (black and white).
2.2 Setting the ADF
●
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
●
2.5 Scanning documents
2.6 How to use the Scanner Driver
●
Halftone
Documents are scanned through halftone processing in black and white.
Grayscale
Documents are scanned with 256 gradations of black and white.
Color
Documents are scanned colored. For this mode, you can select 24 bit Color, 256Color or 8 Color. [Scan] button
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
Starts scanning documents with the current settings.
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
[Preview] button
Documents are scanned preliminary before the actual scanning.
You can confirm the image of the documents in the preview window.
9 OPTIONS
10 SCANNER SPECIFICATIONS
[Close] button
Appendix
Saves the current settings and closes this window.
[Reset] button
Used to undo changes of settings.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11···29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
[Help] button
2 BASIC SCANNER OPERATION
Opens the "FUJITSU TWAIN32 Scanner Driver Help" window. The window also opens by pushing the [F1] key.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
[About...] button
2.3 Loading documents onto the ADF
Opens an information window about the FUJITSU TWAIN32 Scanner Driver's version.
2.4 Scanning document using the Flatbed
2.5 Scanning documents
[Option...] button
2.6 How to use the Scanner Driver
You can set up the details of optional functions on the window below.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11···29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
[Rotation] tab
2 BASIC SCANNER OPERATION
Select this tab when setting image rotation, detection of document size, etc.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
[Job/Cache] tab
2.3 Loading documents onto the ADF
Select this tab when setting cache mode, job controls, double-feed detection, blank page skipping, etc.
2.4 Scanning document using the Flatbed
2.5 Scanning documents
[Generic] tab
2.6 How to use the Scanner Driver
Select this tab to change the unit displayed on the Setting Window for the FUJITSU TWAIN32 Scanner Driver.
(Millimeters, Inches, and Pixels are available)
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
[Startup] tab
Select this tab for setting the Scanner Operation Panel.
(Displayed only when using the scanner of supported type.)
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
[Filter] tab
9 OPTIONS
Select this tab for setting the image processing filter(s).
Page Edge Filler : Fills up the margins of the scanned documents with a selected color.
Digital Endorser : adds characters (such as names, dates, serial numbers, etc.) on scanned image data.
10 SCANNER SPECIFICATIONS
Appendix
[Compression] tab
Select this tab for setting the compression rate of JPEG Transfer.
1···10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21···29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
[Compression] tab
2 BASIC SCANNER OPERATION
Select this tab for setting the compression rate of JPEG Transfer.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
[Advance...] button
2.3 Loading documents onto the ADF
Click this button for settings of the advanced image processing.
You can set Edge Extract, Gamma Pattern, White Level Follower, Dropout Color, Reverse, etc.
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
[Config...] button
Click this button for configuring the Setting Files.
You can save the changed settings as a Setting File. From next scanning, the settings are quickly changed by using these Setting Files.
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
For details of each function, refer to the "FUJITSU TWAIN32 Scanner Driver Help".
1···10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21···29
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2.6.2 FUJITSU ISIS Scanner Driver
2 BASIC SCANNER OPERATION
FUJITSU ISIS Scanner Driver is designed for scanning documents with FUJITSU image scanner fi series by using application software that
complies with The ISIS standard. The following describes the procedure with examples of QuickScan for ordinary scanning by using this
driver software.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
The procedure may vary depending on your application. If you use an application other than QuickScan, please refer to its Guide or Help for
further information.
1. Procedure for Basic Scanning Operation
1. Start up the application.
From the [Start] menu, select [Programs]-[QuickScan] and click [QuickScan].
2. Select your scanner on the window below.
Select [Scan] - [Select Scanner] on the menu bar.
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1···10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21···29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
3. Select [fi-5750C], then click the [OK] button.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
4. Select [Scan] - [New Batch] on the menu bar.
6 TROUBLESHOOTING
1···10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21···29
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
5. Select the profile for scanning.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
❍
9 OPTIONS
10 SCANNER SPECIFICATIONS
❍
Appendix
❍
When creating a new profile
Select one from already existing profiles and click [Add Profile...] button.
>> A new profile will be created based on the profile you select.
When changing the settings of already existing profiles
Select one from already existing profiles and click [Edit Profile...] button.
>> The settings of the selected profile can be changed.
When deleting a profile
Select the one to delete and click [Delete] button.
>> The selected profile will be deleted.
When you added, edited or deleted a profile, go to the procedure 10.
1···10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21···29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
6. Select the [Scan] tab and click the [Scanner Settings] on the [Profile Editor] window.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
>> The configuration window of ISIS driver appears.
1···10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21···29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
7. Configure settings for scanning and click the [OK] button.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
For details on this dialog box, refer to "Configuration Window of FUJITSU ISIS Scanner Driver".
1···10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21···29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
8. The [Profile Editor] window appears. Click the [OK] button to return to [New batch] dialog.
ATTENTION
Configure other settings of the profile, if necessary.
Refer to the "QuickScan Overview" or the "QuickScan Help" for further information on functions and operations of QuickScan. After
the installation of QuickScan, it is registered in the [Start] menu.
2.2 Setting the ADF
9. Load the documents on the scanner.
2.3 Loading documents onto the ADF
1···10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21···29
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
10. Click the [Scan] button.
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
>> Scanned images are displayed on the window.
10 SCANNER SPECIFICATIONS
Appendix
Refer to the "QuickScan Overview" or the "QuickScan Help" for further information on functions and operations of QuickScan. After
the installation of QuickScan, it is registered in the [Start] menu.
1···10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21···29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2. Configuration Window of FUJITSU ISIS Scanner Driver
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
1···10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21···29
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Image Mode
2 BASIC SCANNER OPERATION
Select a color mode suitable for the purpose from the menu.
2.1 Turning the scanner ON/OFF
●
2.2 Setting the ADF
2.3 Loading documents onto the ADF
●
2.4 Scanning document using the Flatbed
2.5 Scanning documents
●
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
●
Black & White
Scans data in binary (black and white). Distinguishes black from white according to the fixed threshold. This scanning mode is suitable
for scanning line drawings and text documents.
16-level Gray scale
Scans data by 14 shades of gray plus black and white. This mode uses 4 bits per pixel.
256-level Gray scale
Scans data by 254 shades of gray plus black and white. This mode uses 8 bits per pixel. This mode is suitable for scanning
monochrome photographs.
24-bit Color
Scans data as full-colored image using 24 bits per pixel. This mode is suitable for scanning color photographs.
4 DAILY CARE
●
5 REPLACING CONSUMABLES
Image Processing
Binary processing is applied to the scanned images This mode is available only when Image Processing Software Option (separately
sold) is installed. Please refer to the Users Guide of Image Processing Software Option for details.
6 TROUBLESHOOTING
7 ONLINE SETUP
Resolution
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
Specifies the number of pixels (dots) per inch.
Select a fixed resolution from the list or enter any value (from 50 to 600) manually.
A higher resolution setting produces finer image, but the file size becomes larger and takes much more time.
10 SCANNER SPECIFICATIONS
1···10 | 11···20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Half tone
2 BASIC SCANNER OPERATION
Select the half tone pattern for half tone scanning. This setting is available when "Black & White" is selected in the "Image Mode".
2.1 Turning the scanner ON/OFF
Dither Pattern 0
2.2 Setting the ADF
This setting is suitable for scanning dark photographs.
2.3 Loading documents onto the ADF
Dither Pattern 1
2.4 Scanning document using the Flatbed
This setting is suitable for scanning dark-colored documents containing both text and photographs.
2.5 Scanning documents
Dither Pattern 2
2.6 How to use the Scanner Driver
This setting is suitable for scanning light photographs.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Dither Pattern 3
4 DAILY CARE
This setting is suitable for scanning dark-colored documents containing both text and photographs.
5 REPLACING CONSUMABLES
Error Diffusion
6 TROUBLESHOOTING
This function minimizes differences of color levels due to subtractive color process by diffusing the difference to the adjacent pixels. This
mode is suitable for scanning images of photographs, etc.
7 ONLINE SETUP
Download
8 DOCUMENT SPECIFICATION OF ADF
Executes processing with the dithered download pattern specified in the dithered download file.
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Brightness
Sets the brightness of the entire image. Specify the brightness as a number within the range of 1 (dark) to 255 (bright). To brighten the entire
image, decrease the value of the setting. To darken the entire image, increase the value.
1···10 | 11···20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Contrast
2 BASIC SCANNER OPERATION
Sets the contrast between light and shadow of the scanned image. Specify the contrast as a number within the range of 1 (low [soft]) to 255
(high [sharp]). Increasing this value makes the contrast sharper.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
Scan Type
2.3 Loading documents onto the ADF
Selects the scanning method.
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
ADF (Front Side)
Scans only the front sides of documents.
ADF (Back Side)
Scans only back sides of documents.
ADF (Duplex)
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
Scans both front and the back sides of documents. When this option is selected, the both sides of documents are scanned simultaneously.
This option can be used only for the models that support duplex scanning.
7 ONLINE SETUP
Flatbed
8 DOCUMENT SPECIFICATION OF ADF
Scans documents placed on the Flatbed.
9 OPTIONS
1···10 | 11···20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Paper Size
2 BASIC SCANNER OPERATION
Selects a paper size according to the size of the document to be scanned. Select a standard paper size from the list.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
Paper Layout
2.3 Loading documents onto the ADF
Specifies orientation of the documents as portrait or landscape.
2.4 Scanning document using the Flatbed
2.5 Scanning documents
Automatic Size and Skew Detection
2.6 How to use the Scanner Driver
Automatically detects the document's page size, and the output will be adjusted to the detected page size. Document skewing is
automatically detected and corrected for the output image.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
[More...] button
Opens [More Settings] window. Used for setting advanced features.
1···10 | 11···20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
[Area...] button
2 BASIC SCANNER OPERATION
Opens the Scan Area dialog box.
Specify scan area for the document size.
The size can be set by dragging the frame with mouse.
Otherwise, enter any value for the setting.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1···10 | 11···20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
[JEPG...] button
2 BASIC SCANNER OPERATION
Opens the JPEG Settings dialog box. Used for setting the compression rate of JPEG transfer.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
[About...] button
Appendix
This button displays the version information.
1···10 | 11···20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
[Setup IPC...] button
2 BASIC SCANNER OPERATION
This button displays the Image Processing dialog. This button is enabled when Image Processing Software Option (separately sold) is
installed and "Image Processing" is selected in the "Image Mode". Refer to the documentation provided with Image Processing Software
Option.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
End of Page Detection
Appendix
Scans the edge (bottom) of the documents and outputs data adjusted to the document length. When any page shorter than specified "Paper
Size" is included, the output size is adjusted to the detected short size.
1···10 | 11···20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Overscan
2 BASIC SCANNER OPERATION
This option specifies the overscan function. This function makes the scanned images larger than the original documents by adding margins.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
Gamma
2.3 Loading documents onto the ADF
Specifies Gamma correction. Correction patterns are: "Normal", "Soft", "Sharp", "Custom", or "Download".
2.4 Scanning document using the Flatbed
2.5 Scanning documents
DTC Variance
2.6 How to use the Scanner Driver
This option specifies the value for adjusting the variance based on the brightness of the image.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
Edge Processing
5 REPLACING CONSUMABLES
This option specifies the sharpness of contour extraction.
6 TROUBLESHOOTING
●
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Low, Mid, High
Emphasizes contour of images. Available settings are: Low, Mid, High
●
Smoothing
Smoothes jaggy images.
1···10 | 11···20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
•
CONTENTS
2.6 How to use the Scanner Driver (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Dropout Color
2 BASIC SCANNER OPERATION
This option excludes selected color (the three primary colors of light i.e. green, red, blue) from scanned images. For example, if the document
contains black text in a red frame and when the red color is selected, the scanner reads only the text and eliminate (drop out) the red frame.
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
Reverse
2.3 Loading documents onto the ADF
Colors of scanned images are reversed.
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Background
Specifies the Background color. Enabled only for the scanners equipped with Background color switching mechanisms.
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
Power saving
This option specifies the waiting time before the scanner switches to the Power save mode.
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Double Feed Detection
Detects Double-feeds (phenomena that two or more sheets are accidentally fed). You can set conditions for detecting Double-feeds so that
the scanner should stop and display error messages. Double feeds are scanned by the differences in document lengths or thicknesses.
1···10 | 11···20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Chapter 3 SCANNING VARIOUS TYPES OF DOCUMENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
This chapter describes how to scan various types of documents with examples of TWAIN Driver.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.1 Scanning double sided documents
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1. Load documents onto the ADF paper chute.
For details on how to load documents, refer to "2.3 Loading documents onto the ADF".
2 BASIC SCANNER OPERATION
2. Adjust the side guides to the width of the documents.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3. Start up ScandAll 21.
At [ Start ] menu, select [Program] - [Scanner Utility for Microsoft Windows] - [ScandAll 21]. This starts up ScandAll 21.
3.2 Scanning documents with different widths
4. Select the scanner to use.
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
1|2|3
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.1 Scanning double sided documents (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
5. Click [Scan To View] on the tool bar. The [TWAIN Driver] dialog box appears.
6. Select [ADF (Duplex)] from [Scan Type].
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
1|2|3
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.1 Scanning double sided documents (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
7. Click the [Scan] button.
For settings in the [TWAIN Driver] dialog box, refer to Chapter "2.6 How to use the Scanner Driver".
2 BASIC SCANNER OPERATION
>> Scanned images are displayed in ScandAll21 window.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
HINT
3.1 Scanning double sided documents
●
For details on ScandAll 21, refer to [ScandAll 21 Help].
●
For details on settings of [TWAIN Driver] dialog box, refer to "2.6 How to use the Scanner Driver".
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
1|2|3
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.2 Scanning documents with different widths
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
When you scan a batch of documents with different widths by using the ADF, you may get skewed images from smaller sized documents. Be
sure to scan only documents of the same width together. To prevent skewed images, enable [Automatic Size and Skew Detection] function.
For details on this function, refer to "3.8 Correcting skewed documents".
1. Adjust the side guides to the width of the largest document.
3.1 Scanning double sided documents
2. Align the edges of the documents.
3.2 Scanning documents with different widths
3. As shown in the figure below, smaller documents are not fed into the ADF if they do not to contact the roller. Make sure to load the
document so that all of sheets contact the roller.
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
For details on how to load documents, refer to "2.3 Loading documents onto the ADF".
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
CAUTION
When loading small documents onto the ADF paper chute, be careful not to touch the Chute roller cover for it may open while scanning
operation and your fingers may get caught.
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.3 Scanning document longer than A3 size
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1. Load the documents onto the ADF paper chute.
For details on loading documents, refer to Chapter "2.3 Loading documents onto the ADF".
2 BASIC SCANNER OPERATION
2. Adjust the side guides to the document width.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3. Start ScandAll 21.
At [ Start ] menu, select [Program] - [Scanner Utility for Microsoft Windows] - [ScandAll 21]. This starts up ScandAll 21.
3.2 Scanning documents with different widths
4. Select the scanner to use.
3.3 Scanning document longer than A3 size
5. Click [Scan To View] on the tool bar. The [TWAIN Driver] dialog box appears.
3.4 Saving scanned images in PDF format
6. Select [Long page (Front Side)] or [Long page (Duplex)] from [Scan Type]. [Long Page Paper Size Setting] window appears.
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
7. Specify the length of documents and click [OK].
8. Click the [Scan] button.
For details on the settings of TWAIN driver, refer to Chapter "2.6 How to use the scanner driver".
The image of scanned documents are displayed on the ScandAll 21 window. For details on the functions and operations of ScandAll 21, refer
to [ScandAll 21 Help].
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.4 Saving scanned images in PDF format
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
To save scanned images in PDF format, Adobe Acrobat 6.0 must be installed on your PC. Adobe Acrobat 6.0 can be installed from the
provided Adobe Acrobat CD-ROM. There are two methods for saving scanned images in PDF format.
HINT
For details on installation of Adobe Acrobat 6.0, refer to fi-5750C Getting Started.
1. Using ScandAll 21
This method is recommended for color or grayscale scanning and when a smaller PDF file size is required. Your benefits are: Reduced PDF data size - Simplified method for creating PDF files with no troublesome operations
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
2. Using Adobe Acrobat 6.0
This method is recommended for faster creation of PDF files and for black and white scanning.
Your benefits are: - Quick creation of PDF files with the original scan resolution. - Flexible creation of PDF files by changing the PDF
compression rates.
The file size increases when scanning color documents by an ordinary method. However, you can drastically reduce the size by using the
Acrobat Distiller before saving the file.
3.8 Correcting skewed documents
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.4 Saving scanned images in PDF format (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
3.4.1 Using ScandAll 21
2 BASIC SCANNER OPERATION
1. Load the documents on the ADF paper chute.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
2. Start up ScandAll 21.
Select [Program] - [ScannerUtility for Microsoft Windows] - [ScandAll21] from the [Start] menu. This will start up the application.
3.1 Scanning double sided documents
3. From the [Scan] menu select [To Adobe PDF].
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
>>[TWAIN Driver] dialog box appears.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.4 Saving scanned images in PDF format (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
4. Set the scan resolution, paper size, etc., and then click the [Scan] button.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.4 Saving scanned images in PDF format (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
5. To end scanning, click the [Close] button.
>> The scanned image is displayed.
6. Enter the file name and select the destination to save the scanned image.
For details, refer to "ScandAll 21 Help".
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.4 Saving scanned images in PDF format (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
3.4.2 Using Adobe Acrobat 6.0
2 BASIC SCANNER OPERATION
1. Load the documents on the ADF paper chute.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
2. Start up Adobe Acrobat 6.0
Select [Program] - [Adobe Acrobat 6.0] from the [Start] menu. This starts up Adobe Acrobat 6.0.
3.1 Scanning double sided documents
3. From the [File] menu select [Create PDF] - [From Scanner].
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
>> [Create PDF From Scanner] dialog box appears.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.4 Saving scanned images in PDF format (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
4. Select [FUJITSU fi-5750Cdj] ([FUJITSU TWAIN 32] for WindowsNT 4.0) at [Device] and click the [Scan] button.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
>>[TWAIN Driver] dialog box appears.
10 SCANNER SPECIFICATIONS
ATTENTION
Appendix
Select [Simplex] even if you intend to do duplex scanning.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.4 Saving scanned images in PDF format (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
5. Select the scan resolution, document size, etc., and click the [Scan] button.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.4 Saving scanned images in PDF format (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
6. To end scanning, click the [Done] button.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
>> The scanned image is displayed.
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.4 Saving scanned images in PDF format (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
7. Select [Save as...] or [Save] from the [File] menu to save the scanned image.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
For the details on Adobe Acrobat 6.0 operations, refer to the Adobe Acrobat 6.0 manual and Help.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.4 Saving scanned images in PDF format (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
HINT If you save scanned images by this procedure, the file size may increase greatly. For reducing the file size, follow the procedure below.
(It may take much more time than the usual saving procedure.)
1. Select [File] - [Print...]
2. On the following dialog specify [Adobe PDF] for [Name].
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.4 Saving scanned images in PDF format (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3. Click the [Properties] button.
4. Click the [Adobe PDF Settings] tab.
5. Select one from [Default Settings].
The following shows an example of [Standard].
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
6. Click the [OK] button.
7. Enter a file name and click the [Save] button on the [Save PDF File As] dialog box.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.5 Selecting a color to drop out
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
A selected color (red, green, blue) can be removed (dropped out) from the scanned image data. For example, if the document contains black
text in green frames, you can set the scanner to get only the text and eliminate the green frames.
To drop out a color, change the setting in the driver setting dialog box.
1. Click [Advance] button in the [TWAIN Driver] dialog box.
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
>> The [Advance] dialog box appears.
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.5 Selecting a color to drop out (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2. Select the color to drop out from [Dropout Color] under [More]. For example, if the document contains black text in green frames, you
can set the scanner to get only the text and eliminate the green frames.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
3. Click [ OK ]button.
The display returns to [TWAIN Driver] dialog box. Perform the scanning operation on the dialog box.
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.6 Skipping blank pages
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
Change settings in the [TWAIN Driver] dialog box for skipping blank pages at scanning documents.
1. Click [Option] button in the [TWAIN Driver] dialog box.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
>> The [Option] dialog box appears.
1|2|3
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.6 Skipping blank pages (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2. Click the [Job/Cache] tab.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
1|2|3
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.6 Skipping blank pages (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3. Check the [Blank Page Skip] box.
4. By using the slider control under [Blank Page Skip], specify the [Black Dots Ratio] or [White Dots Ratio] (ratio of black or white parts
on the documents) for judging if the scanned documents are recognized as blank pages by the scanner. The [TWAIN Driver] dialog
box will be redisplayed. Perform the scanning operation on the dialog box.
<In Binary/Halftone mode>
<In Color/Grayscale mode>
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
1|2|3
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.7 Detecting double-feeds
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
"Double-feed" is an error that occurs when two or more sheets are accidentally fed into the ADF at the same time. You can set the scanner to
display an error message when it detects a double-feed.
To set conditions for the double-feed detection, change the settings in the [TWAIN Driver] dialog box.
1. Click [Option] button in the [TWAIN Driver] dialog box.
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
>> The [Option] dialog box appears.
Appendix
1|2|3
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.7 Detecting double-feeds (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2. Click the [Job/Cache] tab.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
1|2|3
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.7 Detecting double-feeds (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
3. Select the detection conditions from [Double Feed Detection] under [ADF Option]. The following are the detection conditions
2 BASIC SCANNER OPERATION
None
Double-feed detection is not performed
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Check overlapping
The scanner monitors the overlapping of documents.It detects a double-feed by differences in document
thickness when two or more document sheets are fed overlapping.
Check length
The scanner monitors the length of documents. It detects a double-feed by differences in the document length
when two or more document sheets are fed overlapping.
Check overlapping and length
The scanner monitors both document overlapping and length to detect double-feeds.
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
4. Click [ OK ] button to return to [ TWAIN driver ] dialog box. Perform the scanning operation on the dialog box.
For details, refer to "8.5 Double feed detection conditions".
3.6 Skipping blank pages
1|2|3
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.8 Correcting skewed documents
Introduction
1 NAMES AND FUNCTIONS OF PARTS
You can set the scanner so that skew of documents are detected and corrected automatically when skewed documents are fed into the ADF.
2 BASIC SCANNER OPERATION
Change the setting in the [TWAIN Driver] dialog box to enable this function. The following shows the procedure for changing the setting in the
dialog box:
3 SCANNING VARIOUS TYPES OF DOCUMENTS
1. Click [Option] button in the [TWAIN Driver] dialog box.
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
>> The [Option] dialog box appears.
10 SCANNER SPECIFICATIONS
2. Click the [Rotation] tab.
Appendix
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
3.8 Correcting skewed documents (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
3. Select the [Automatic page size detection ] from the [Automatic Size and Skew Detection] menu.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
4. Click the [OK] button.
The display returns to [TWAIN Driver] dialog box. Perform the scanning operation on the dialog box..
10 SCANNER SPECIFICATIONS
HINT
Appendix
HINT With [Priority] slider control, you can change accuracy of Automatic Page Size Detection. Move the slider to the right when
improving the detection accuracy. (Note that higher accuracy setting requires much more processing time and scanning speed
becomes slower.)
ATTENTION
When using either of the following documents, the automatic page size detection may not function correctly:
- Paper of weight 52g/m2 or less.
- Not rectangular documents.
- Documents which their edges are filled.
HINT
This function is available for flatbed scanning, when the scanner is equipped with Document holding pad (black) option.
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Chapter 4 DAILY CARE
Introduction
1 NAMES AND FUNCTIONS OF PARTS
This chapter describes how to clean the scanner.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
4.3 Cleaning the Flatbed
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
4.1 Cleaning material and locations requiring cleaning
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1. Cleaning material
2 BASIC SCANNER OPERATION
Cleaning material
Part No.
Remarks
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Cleaning paper
CA99501-0012
Used with Cleaner F1
Cleaner F1
(or isopropyl alcohol)
CA99501-0013
1 bottle
Moisten cloth with this fluid and wipe the scanner clean.
Cleaner F2
CA99501-0014
1 bottle
70 ml/bottle For cleaning of plastic rollers only.
Cotton swab
Commercially available one.
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
4.3 Cleaning the Flatbed
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Cloth
CAUTION
Do not clean rubber parts with Cleaner F2.
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
4.1 Cleaning material and locations requiring cleaning (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2. Locations requiring cleaning
Using cleaning paper with
Cleaner F1
Using Cloth with Cleaner F1
Using Cotton swab with Cleaner F2
per 10,000 scans
per 10,000 scans
When stains are persistent
Part
Names of parts
Flat bed
Document holding pad
Yes
Document bed
Yes
Chute roller
Yes
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
ADF
4.3 Cleaning the Flatbed
Pick arm
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
Yes
Pick roller
Yes
Yes
Pick belt
Yes
Yes
7 ONLINE SETUP
Separation roller
Yes
Yes
8 DOCUMENT SPECIFICATION OF ADF
Brake roller
Yes
Yes
9 OPTIONS
Feed roller
Yes
Yes
10 SCANNER SPECIFICATIONS
Plastic roller
Yes
Yes
Appendix
Sheet guide/glass
Yes
Yes
Ultrasonic sensor
Clean this part with a dry lintfree cloth.
You have to clean the scanner frequently as following cases :
●
Scan a smooth surface document such as a coated paper.
●
Scan a printed document almost fill in the paper.
●
Scan a processed with chemicals document such as carbonless paper.
●
Scan a document having a high calcium content.
●
Scan a lot of penciled document.
CAUTION
Do not clean rubber parts with Cleaner F2.
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
Yes
CONTENTS
4.2 Cleaning the ADF
Introduction
1 NAMES AND FUNCTIONS OF PARTS
4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1
2 BASIC SCANNER OPERATION
Cleaning the Brake roller, Glasses, Sheet guides, Plastic rollers
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
1. Open the ADF while pushing the ADF button.
2. Using a cloth moisten with Cleaner F1, clean the Brake roller, Glasses, Sheet guides, Plastic rollers.
3. Close the ADF.
4.2 Cleaning the ADF
4.3 Cleaning the Flatbed
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
CAUTION
Be careful not to pinch your fingers with the ADF cover.
Be careful not to touch the glass surface inside the ADF because it becomes hot during the operation.
ATTENTION
Install the Brake roller aligning the flat part of the shaft to the holder.
Confirm that the Brake roller is installed completely. If not, document jams or other feeding errors may occur.
As a guideline, clean the ADF per 10,000 scans.
This value may vary depending on the type of document that you scan. For example, when you scan documents which toner is not
sufficiently fixed, the scanner must be cleaned more frequently.
1|2|3|4
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
4.2 Cleaning the ADF (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1
(Continued from the previous page)
2 BASIC SCANNER OPERATION
Cleaning the Pick roller set, Feed rollers
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
1. Open the ADF while pushing the ADF button. If you open the ADF when the indication of the Function No. display is "P" or "0", the
Pick roller set and Feed rollers do not rotate even you operate the scanner as step 2 below. So open the ADF when the indication is
not "P" or "0".
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
4.3 Cleaning the Flatbed
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
2. Hold down both the "Send to" and "Scan" buttons on the operator panel. The Pick roller set and Feed rollers start rotate a little. For
details on locations of the "Send to" and "Scan" buttons, refer to "1.2 Functions of the operator panel".
3. Hold lint-free dry cloth moistened with the Cleaner F1 against the rotating rollers so that it lightly cleans the surfaces of the rotating
rollers. Take particular care in cleaning these rollers as black debris on them adversely affects the pickup performance. As a guideline,
seven presses of the "Send to" and "Scan" buttons rotate the Pick roller set and Feed rollers one full turn.
CAUTION
-Be careful not to pinch your fingers with the ADF cover.
-The glass surface inside the ADF becomes hot during the operation of the scanner.
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1|2|3|4
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
4.2 Cleaning the ADF (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
4.2.1 Cleaning the ADF using with a cloth moisten with Cleaner F1
(Continued from the previous page)
2 BASIC SCANNER OPERATION
Cleaning the Chute roller
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Open the Chute roller cover and clean the roller using a cloth moisten with Cleaner F1.
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
4.3 Cleaning the Flatbed
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Cleaning the Pick arm
Open the ADF while pushing the ADF button and clean the Pick arm using a cloth moisten with Cleaner F1.
CAUTION
-Be careful not to pinch your fingers with the ADF cover.
1|2|3|4
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
4.2 Cleaning the ADF (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
4.2.2 Cleaning the ADF using Cleaning paper
2 BASIC SCANNER OPERATION
1. Open the ADF while pushing the ADF button.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
2. Apply Cleaner F1 o a new piece of cleaning paper.
4 DAILY CARE
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
3. Place the cleaning paper on the ADF so that its edge contact the plastic rollers.
4. Close the ADF and the cleaning paper is ejected through the ADF.
5. Repeat steps 1 through 4.
4.3 Cleaning the Flatbed
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
HINT
Leave the scanner on during the ADF cleaning.
1|2|3|4
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
4.3 Cleaning the Flatbed
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
1. Open the Document cover holding the handle.
2. Using a cloth moisten with Cleaner F1, lightly wipe off dirt on th glass part and the Document holding pad.
3. Let the Document bed dry about a few minutes.
4. Close the Document cover.
4.1 Cleaning materials and locations requiring cleaning
4.2 Cleaning the ADF
4.3 Cleaning the Flatbed
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
HINT
-Instead of Cleaner F1, glass cleaners can be used for cleaning the Document bed (except for the ones not appropriate for cleaning plastic
parts).
-Do not use organic solvents such as paint thinner.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Chapter 5 REPLACING CONSUMABLES
Introduction
1 NAMES AND FUNCTIONS OF PARTS
This chapter describes how to replace scanner consumables.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
5.1 Consumable and Replacement Cycle
Introduction
1 NAMES AND FUNCTIONS OF PARTS
The following table shows the specifications of consumables and guidelines for the replacement cycle.
2 BASIC SCANNER OPERATION
Description
Parts No.
Standard Replacement Cycle
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Brake roller
PA03338-K010
After 250,000 scans or one year
4 DAILY CARE
Pick roller*
PA03338-K011
After 250,000 sheets or one year
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
* A set of two rollers.
The replacement cycles above are rough guidelines for the case of using A4/Letter wood free or wood containing paper 64 g/m2 (17 lb). This
cycle varies according to the type of the used paper and how frequently the scanner is used and cleaned.
ATTENTION
Use only the specified consumables. Do not use other consumables.
6 TROUBLESHOOTING
1|2|3|4|5|6|7
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
5.1 Consumable and Replacement Cycle (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
●
Guidelines for Consumable Replacement Cycle
With this product, you can learn how many times the consumables are used so that you can estimate the right timing for the replacement.
1. When turning on the power, check that the scanner is connected to your PC.
Refer to "2.2 Connecting the Scanner to a PC" in fi-5750C Getting Started for information about connecting the scanner to your
personal computer.
1|2|3|4|5|6|7
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
5.1 Consumable and Replacement Cycle (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2. From [Start] menu, select [All Programs] - [Scanner Utility for Microsoft Windows] and click [Software Operation Panel].
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
>> The [FUJITSU Software Operation Panel] window appears.
1|2|3|4|5|6|7
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
5.1 Consumable and Replacement Cycle (Continued from the previous page)
Introduction
3. Click the [Device Setting] tab
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
>> The following panel appears.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
You can confirm the following information on this panel:
●
●
●
Total number of scans
Brake Roller counter (approximate number of scans after resetting the Brake Roller counter)
Pick Roller (approximate number of scans after resetting the Pick Roller counter)
1|2|3|4|5|6|7
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
5.1 Consumable and Replacement Cycle (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
The following message may appear while you use the scanner:
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
Replace consumables when this message is displayed.
9 OPTIONS
1|2|3|4|5|6|7
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
5.1 Consumable and Replacement Cycle (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
The following message may appear while you use the scanner:
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
Replace consumables when this message is displayed.
9 OPTIONS
1|2|3|4|5|6|7
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
5.1 Consumable and Replacement Cycle (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
●
When Replacing Consumables Immediately
1. To replace consumables after completing the scanning of all the document sheets in the ADF, click the [Ignore] button. To abort
scanning and replace the consumables immediately, click the [Cancel] button.
2. Replace the consumables. For details on how to replace consumables, refer to "5.2 Replacing the Brake roller" and "5.3 Replacing the
Pick roller set".
3. To disable display of this message, mark the "This message not display again" check box. Note that when the "This message not
display again" check box is marked, this message is not displayed until the consumables counter is reset.
5.1 Consumable and replacement cycle
1|2|3|4|5|6|7
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
5.1 Consumable and Replacement Cycle (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
●
When Consumables Cannot Be Replaced Immediately
1. To continue scanning of the current document, click the [Ignore] button. To stop scanning, click the [Cancel] button.
2. Replace the consumable as soon as possible when the message is displayed. For details on how to replace consumables, refer to
"5.2 Replacing the Brake roller" and "5.3 Replacing the Pick roller set".
3. To disable display of this message, mark the "This message not display again" check box. Note that when the "This message not
display again" check box is marked, this message is not displayed until the consumables counter is reset. To display the message
again after scanning 1,000 sheets, mark the [Warns again after scanning 1,000 pages] check box.
1|2|3|4|5|6|7
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
5.2 Replacing the brake roller
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1. Remove all documents from the ADF paper chute.
2. Open the ADF cover by pushing down the ADF button.
3. Remove the brake roller from the scanner.
4. Install a new roller to the shaft aligning the protrusion on the shaft to the slot on the brake roller. Install the brake roller to the holder
aligning the flat part of the shaft to the guide slot of the holder.
5. Push the center of the ADF cover to close it until the ADF button is locked.
6. Reset the Brake Roller counter. For details on resetting, refer to "7.6 Resetting the consumable counters".
ATTENTION
Be careful not to pinch your fingers with the ADF cover. -Do not close the ADF cover when the Brake Roller cover is opened.
HINT
Confirm that the Brake roller is firmly installed. If not, it may cause feeding errors such as double-feeding.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
5.3 Replacing the pick roller set
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1. Open the ADF while pushing the ADF button.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2. Remove the ADF paper chute from the scanner.
3. Open the pick roller cover. Slide the rollers to right and remove them from the scanner.
4. Install a new pick roller and a separation roller aligning the holes of roller to the shafts.
5. Close the pick roller cover.
6. Attach the ADF paper chute.
7. Push in the center of the ADF to close it until the ADF button is locked.
8. Reset the Pick Roller counter. For details on resetting, refer to "7.6 Resetting the consumable counters".
ATTENTION
Be careful not to pinch your fingers with the ADF cover. -Do not close the ADF cover when the pick roller cover is opened.
HINT
Confirm that rollers of the pick roller set are firmly installed. If not, they may cause feeding errors such as document jams.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Chapter 6 TROUBLESHOOTING
Introduction
1 NAMES AND FUNCTIONS OF PARTS
This chapter describes how to remedy document jams, other troubles, items to check before contacting the dealer where you bought the
scanner, and how to check the device labels.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
6.1 Removing jammed documents
Introduction
1 NAMES AND FUNCTIONS OF PARTS
ATTENTION
2 BASIC SCANNER OPERATION
-The glass surface inside the ADF becomes hot during the operation. Be careful not to touch the glass surface inside the ADF.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
-Be careful not to pinch your fingers with the ADF.
4 DAILY CARE
If a document jam occurred because of double-feeding, etc., follow the procedure below to remove the jammed documents.
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
1. Remove all documents from the ADF paper chute.
2. Open the ADF by pushing the ADF button.
3. Remove the jammed documents.
4. Push in the center of the ADF to close it until the ADF button is locked. Confirm that it is closed completely.
Make sure that the ADF is completely closed. When it is not completely closed, document jams or feeding errors may occur.
ATTENTION
-If there is any metal object (paper clips, etc.) in the inside of the ADF, it causes document jams. Check the inside of the ADF and make sure
there is no metal object.
-Be sure to remove metal object (paper clips, etc.) from the document before scanning.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
6.2 Indications of operator panel for errors
Introduction
3 SCANNING VARIOUS TYPES OF DOCUMENTS
When any error occurred, the operator panel indicates "U" for temporary errors or "E" for device alarm (permanent error). Temporary errors
can be resolved by the operator, but the device alarm requires recovery works by support engineers.
When Error Recovery Guide is installed on your PC, its window appears when Windows is started up. If any error or device alarm occurred,
this software displays information such as error names and error codes regarding the error/alarm. Record the information and click [Details]
on its window to learn detailed information for trouble shooting.
4 DAILY CARE
ERROR :
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
5 REPLACING CONSUMABLES
Indication
Meaning
6 TROUBLESHOOTING
U0
Confirm that the shipping lock is released.
6.1 Removing jammed documents
U1
A paper feed error occurred.
6.2 Indications of operator panel for errors
U2
A double feed error occurred.
6.3 Items to check before contacting the dealer where you
bought the scanner
U3
Reserve
U4
The ADF cover is opened.
6.4 Checking labels on the scanner
7 ONLINE SETUP
HINT
8 DOCUMENT SPECIFICATION OF ADF
Error Recover Guide is stored in Setup CD-ROM. When installing the application software, refer to "2.3.3 Installing other application
programs" in fi-5750C Getting Started.
9 OPTIONS
1|2|3
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
6.2 Indications of operator panel for errors (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Device alarm:
2 BASIC SCANNER OPERATION
Indication
Meaning
3 SCANNING VARIOUS TYPES OF DOCUMENTS
E0
Flatbed motor malfunction
4 DAILY CARE
E1
Optical error (Flatbed)
5 REPLACING CONSUMABLES
E2
Optical error (ADF front)
E3
Optical error (ADF back)
E4
Motor fuse malfunction
E5
Lamp fuse malfunction
E6
Operator panel malfunction
E7
EEPROM malfunction
E8
SCSI interface fuse malfunction
E9
Image memory malfunction
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
When you encounter any alarm, turn off and on the scanner. If the alarm is still displayed on the Function No. display, contact the dealer
where you purchased the scanner or an authorized FUJITSU scanner service provider.
10 SCANNER SPECIFICATIONS
1|2|3
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
6.2 Indications operator panel for errors (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Indication
Meaning
2 BASIC SCANNER OPERATION
Ec
Memory malfunction
3 SCANNING VARIOUS TYPES OF DOCUMENTS
ED
SPC malfunction
4 DAILY CARE
EF
Background switching mechanism malfunction
E10
ROM malfunction
E11
Fan malfunction
E12
Heater malfunction
E13
(Reserve)
E14
(Reserve)
E15
Extended memory option malfunction * See ATTENTION as below.
E16
Option board malfunction
7 ONLINE SETUP
E18
Sensor malfunction
8 DOCUMENT SPECIFICATION OF ADF
E19
LSI malfunction
E1A
Scanner inside communication malfunction
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
9 OPTIONS
10 SCANNER SPECIFICATIONS
ATTENTION
Appendix
When the scanner is in trouble, please check as fllows and refer to "9.1 Additional memory board".
1.
2.
3.
4.
Is it the right additional memory board?
Is the additional memory board set in place?
Isn't the additional memory board broken?
Are there two additional boards?
When you encounter any alarm, turn off and on the scanner. If the alarm is still displayed on the Function No. display, contact the dealer
where you purchased the scanner or an authorized FUJITSU scanner service provider.
1|2|3
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
6.3 Items to check before contacting the dealer where you bought the scanner
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
Before you ask for repair service, click the link below to display Trouble shooting table and check the items on the table.
Trouble Shooting
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
If you cannot solve the problem after checking the remedies in the Trouble shooting table, contact the dealer where you bought the scanner
or an authorized FUJITSU scanner service provider. Before you ask for repair service, please collect the following information.
5 REPLACING CONSUMABLES
Check items:
6 TROUBLESHOOTING
Model : (Example) fi-5750C
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
For details on the model, refer to Chapter "6.4 Checking labels on the scanner".
Serial No. : (Example) 000001
6.3 Items to check before contacting the dealer where you
bought the scanner
For details on the serial No., refer to Chapter "6.4 Checking labels on the scanner".
6.4 Checking labels on the scanner
Production date : (Example) 2004-01 (January, 2004)
For details on the production date, refer to Chapter "6.4 Checking labels on the scanner".
7 ONLINE SETUP
1|2
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Trouble Shooting
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
The scanner cannot be turned ON.
The Function No. display indicates an alarm after the scanner is powered ON.
Indication on the Function No. display goes out. The scanning does not start.
The scanning does not start.
Quality of scanned pictures or photos is not satisfactory.
6.1 Removing jammed documents
Quality of scanned text or lines is not satisfactory.
6.2 Indications of operator panel for errors
Images are distorted or blurred.
6.3 Items to check before contacting the dealer where you
bought the scanner
Vertical lines appear in the scanned images.
6.4 Checking labels on the scanner
Double-feed errors occur frequently.
7 ONLINE SETUP
Pickup errors occur frequently.
8 DOCUMENT SPECIFICATION OF ADF
Paper jams occur frequently.A12
9 OPTIONS
The scanned images are elongated
10 SCANNER SPECIFICATIONS
There is a shadow on the leading edge of the scanned images.
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Symptom : The scanner cannot be turned ON.
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Is the power cable correctly connected?
Connect the power cable correctly.
NO
4 DAILY CARE
5 REPLACING CONSUMABLES
YES
6 TROUBLESHOOTING
6.1 Removing jammed documents
Push the power button.
Did you push the power button?
NO
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
YES
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Introduction
Symptom : The Function No. display indicates an alarm ("E" and any number or character) after the
scanner is powered ON.
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
(When the scanner is just installed on the place) Did you unlock
the shipping lock?
NO
Turn OFF the scanner and unlock the shipping lock, then turn
ON the scanner again.
Reference : "Getting Started" 2.1 Installing the scanner
5 REPLACING CONSUMABLES
YES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
Does the Function No. display indicate any alarm after turning
ON the scanner again?
6.3 Items to check before contacting the dealer where you
bought the scanner
NO
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
The scanner operation is normal.
YES
CONTENTS
Symptom : Indication on the Function No. display goes out.
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Does the display remain blank even after you push any button
on the operator panel?
The scanner operation is normal.
NO
4 DAILY CARE
5 REPLACING CONSUMABLES
YES
6 TROUBLESHOOTING
6.1 Removing jammed documents
Does the display remain blank even after running ON the
scanner again?
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
YES
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
The scanner operation is normal.
NO
CONTENTS
Symptom : The scanning does not start.
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Did you unlock the shipping lock?
NO
Turn OFF the scanner and unlock the shipping lock.
Reference : "Getting Started" 2.1 Installing the scanner
4 DAILY CARE
5 REPLACING CONSUMABLES
YES
6 TROUBLESHOOTING
6.1 Removing jammed documents
Load the documents correctly onto the ADF paper chute.
Are the documents loaded correctly on the ADF paper chute?
NO
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
YES
6.4 Checking labels on the scanner
7 ONLINE SETUP
Is the ADF closed completely?
Close the ADF completely.
NO
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
YES
10 SCANNER SPECIFICATIONS
Appendix
Connect the interface cable correctly.
Reference : "Getting Started" 2.2 Connecting the scanner to
Is the interface cable connected correctly?
NO
your PC
YES
Is the connecter of interface cable broken?
Use a new interface cable and correctly connect it.
NO
YES
(When using the scanner on SCSI interface) Is the SCSI ID set
correctly?
Turn OFF the scanner and set the SCSI ID correctly, then turn
ON the scanner again.
NO
Reference : "Getting Started" 2.2 Connecting the scanner to
your PC
YES
Doesn't the scanning start even after running ON the scanner
again?
YES
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
The scanner operation is normal.
NO
CONTENTS
Symptom : Quality of scanned pictures or photos is not satisfactory.
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Did you select half toning or dithering?
Select half toning or dithering on your PC.
NO
4 DAILY CARE
5 REPLACING CONSUMABLES
YES
6 TROUBLESHOOTING
6.1 Removing jammed documents
Are the upper/lower glasses inside the ADF, the document bed,
and the document holding pad clean?
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
YES
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
Clean dirty locations.
NO
CONTENTS
Symptom : Quality of scanned text or lines is not satisfactory.
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Are the upper/lower glasses inside the ADF, the document bed,
and the document holding pad clean?
4 DAILY CARE
5 REPLACING CONSUMABLES
YES
6 TROUBLESHOOTING
6.1 Removing jammed documents
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
6.2 Indications of operator panel for errors
you bought the scanner" and contact the dealer or an authorized
6.3 Items to check before contacting the dealer where you
bought the scanner
FUJITSU service provider.
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
Clean dirty locations.
NO
CONTENTS
Symptom : Images are distorted or blurred.
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Are the upper/lower glasses inside the ADF, the document bed,
and the document holding pad clean?
Clean dirty locations.
NO
4 DAILY CARE
5 REPLACING CONSUMABLES
YES
6 TROUBLESHOOTING
6.1 Removing jammed documents
Is the ADF cover pressed down or heavy object placed on the
ADF during scanning?
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
YES
Do not press down the ADF or place heavy object on the ADF
during scanning.
NO
6.4 Checking labels on the scanner
7 ONLINE SETUP
Is something causing the scanner to vibrate during scanning?
YES
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
Do not allow anything to cause the scanner to vibrate while
scanning.
NO
10 SCANNER SPECIFICATIONS
Appendix
Is the scanner installed on a flat, level surface?
Install the scanner on a flat, level surface.
NO
YES
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Symptom : Vertical lines appear in the scanned images.
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Clean the glass.
Did you scan the document with the Flatbed?
YES
4 DAILY CARE
NO
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
Clean the upper/lower glasses inside the ADF.
Do the lines appear on the same part of images?
YES
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
NO
6.4 Checking labels on the scanner
7 ONLINE SETUP
Do not the lines appear on images with low resolution settings?
Scan the documents with low resolution settings.
YES
8 DOCUMENT SPECIFICATION OF ADF
NO
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Symptom : Double-feed errors occur frequently.
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
Do the documents satisfy the conditions described in "8.2
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Use documents that satisfy the requirements.
Document Quality"?
NO
4 DAILY CARE
5 REPLACING CONSUMABLES
YES
6 TROUBLESHOOTING
6.1 Removing jammed documents
When the double-feed detection is ON, are the double feed
detection conditions satisfied?
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
Satisfy the double-feed detection conditions.
NO
YES
6.4 Checking labels on the scanner
7 ONLINE SETUP
Were the documents fanned before loaded onto the ADF paper
chute?
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
Fan the documents before loading, or reduce the number of
NO
sheets of the documents.
YES
10 SCANNER SPECIFICATIONS
Appendix
Have the documents just been printed out by a copier or laser
printer?
Fan the documents 3 or 4 times to remove static electricity from
YES
the paper.
NO
Reduce the number of sheets in the stack, referring to "8.3
Is the document stack over 20mm(A4)/10mm(A3)?
YES
Maximum ADF capacity".
NO
Are all the consumables (Pick roller set, Brake roller) installed
correctly?
Correctly install the consumable(Pick roller set, Brake roller), if
NO
needed.
YES
Clean the dirty consumable.
Is any of consumables (Pick roller set, Brake roller) dirty?
YES
NO
Is any of consumables (Pick roller set, Brake roller) worn out?
Check the consumable counter.
NO
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
Replace the consumable, if needed. Refer to "" for details on the
YES
consumable counter.
CONTENTS
Symptom : Pickup errors occur frequently.
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
Do the documents satisfy the conditions described in "8.2
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Use documents that satisfy the requirements.
Document Quality"?
NO
4 DAILY CARE
5 REPLACING CONSUMABLES
YES
6 TROUBLESHOOTING
6.1 Removing jammed documents
Were the documents fanned before loaded onto the ADF paper
chute?
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
Fan the documents before loading, or reduce the number of
NO
sheets of the documents.
YES
6.4 Checking labels on the scanner
7 ONLINE SETUP
Are all the consumables (Pick roller set, Brake roller) installed
correctly?
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
Correctly install the consumable(Pick roller set, Brake roller), if
NO
needed.
YES
10 SCANNER SPECIFICATIONS
Appendix
Clean the dirty consumable.
Is any of consumables (Pick roller set, Brake roller) dirty?
YES
NO
Is any of consumables (Pick roller set, Brake roller) worn out?
Check the consumable counter.
NO
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
Replace the consumable, if needed. Refer to "Replacing
YES
Consumables" for details on the consumable counter.
CONTENTS
Symptom : Paper jams occur frequently.
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
Do the documents satisfy the conditions described in "8.2
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Use documents that satisfy the requirements.
Document Quality"?
NO
4 DAILY CARE
5 REPLACING CONSUMABLES
YES
6 TROUBLESHOOTING
6.1 Removing jammed documents
Clean the ADF or remove debris from the ADF.
Is there any debris in the ADF?
YES
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
NO
6.4 Checking labels on the scanner
7 ONLINE SETUP
Are all the consumables (Pick roller set, Brake roller) installed
correctly?
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
Correctly install the consumable (Pick roller set, Brake roller) , if
needed.
NO
YES
10 SCANNER SPECIFICATIONS
Appendix
Clean the dirty consumable UI.
Is any of consumables (Pick roller set, Brake roller) dirty?
YES
NO
Is any of consumables (Pick roller set, Brake roller) worn out?
Check the consumable counter.
NO
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
Replace the consumable, if needed. Refer to "Replacing
YES
Consumables" for details on the consumable counter.
CONTENTS
Symptom : The scanned images are elongated
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Clean all of the roles.
Did you cleaned all of the rollers?
NO
4 DAILY CARE
5 REPLACING CONSUMABLES
YES
6 TROUBLESHOOTING
6.1 Removing jammed documents
Do the documents satisfy the conditions described in "8.2
Use documents that satisfy the requirements.
Document Quality"?
NO
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
YES
6.4 Checking labels on the scanner
Adjust [Vertical magnification Adjustment]
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
From [Start] menu, select [All Programs] - [Scanner Utility for
Microsoft Windows] and click [FUJITSU Software Operation
Panel]. Click the [Device Setting] on the [FUJITSU Software
Operation Panel] window, then adjust [Vertical magnification
10 SCANNER SPECIFICATIONS
Appendix
Adjustment].
Is the problem fixed ?
NO
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
Normal Operation
YES
CONTENTS
Symptom : There is a shadow on the leading edge of the scanned images.
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Back to the trouble shooting index
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Did you adjust the offset (starting position for scanning the
4 DAILY CARE
document)?
NO
From [Start] menu, select [All Programs] - [Scanner Utility for
Microsoft Windows] and click [FUJITSU Software Operation
Panel]. Click the [Device Setting] on the [FUJITSU Software
Operation Panel] window, then adjust [Sub] under [Offset
Setting].
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
YES
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
If you cannot solve the problem after taking measures, check the
items in "6.3 Items to check before contacting the dealer where
6.3 Items to check before contacting the dealer where you
bought the scanner
you bought the scanner" and contact the dealer or an authorized
FUJITSU service provider.
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Introduction
6.3 Items to check before contacting the dealer where you bought the scanner (Continued from the
previous page)
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Please print out the Check List as below, it will be displayed on a new window when you click the link, and fill as much information as
possible before contacting the agent.
The check list.
4 DAILY CARE
1|2
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
Items to check before contacting the dealer where you
bought the scanner
Installation or PC connection issues
Trouble of connection to your PC
Meaning
Check the following items before you contact the dealer where you bought the scanner.
Findings
OS
General Details
Meaning
Model
Serial No.
Production date
Displayed error message
(For support engineers, please record the error message and send images of captured
screen.)
Interface
(Example) SCSI interface
Interface controllers
(Example) made by Adaptec SCSI Card 2940AU
Findings
(Example) fi-5750C
(Example) 000001
(Example) 2004-01 (January, 2004)
Feed system trouble
Meaning
Findings
Date of purchase
Document type
Symptom
Main purpose of use
Frequency of trouble
Last cleaning date
Total Page Count(ADF)
Total Page Count(Flatbed)
Value of Consumable counter
(Example) Pick roller set counter XXX
Displayed sign or number on
the Operator panel at trouble
Imaging system trouble
Meaning
Findings
Type and version of scanner
driver
Type of interface controller
(Example) made by Adaptec SCSI Card 2940AU
OS (Windows)
Application software
(Example) ScandAll 21, Acrobat
Others
Meaning
Can you send us both the original document and
the scanned images by e-mail or Fax?
Findings
CONTENTS
6.4 Checking labels on the scanner
Introduction
1 NAMES AND FUNCTIONS OF PARTS
The equipment labels of fi-5750C Image Scanner are as follows.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3 Items to check before contacting the dealer where you
bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
The label position is as below.
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Chapter 7 ONLINE SETUP
Introduction
1 NAMES AND FUNCTIONS OF PARTS
This chapter describes settings of fi-5750C Image Scanner using "Software Operation Panel".
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting edge erasing
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumable counters
7.7 Adjusting the offset
7.8 Adjusting the scan scale
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
7.1 Online setup
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
"Software Operation Panel" is an application program that is installed with driver software (TWAIN/ISIS). This software allows you to
configure various settings for fi-5750C with user-friendly interfaces. To start this application, select [All Programs] - [Scanner Utility for
Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel]. Details of settings are as follows:
No
Function
Description
Settings
Default
1
Double feed
Specifies double feed detection
method. The scanner monitors
differences in document length,
overlapping or both, for detecting
double-feeds.
None / Check Overlapping / Check
Length / Check overlapping and length
For setting the length difference
detection, select 15 / 10 / 20mm
None
2
Page Edge Filler(ADF)
Specifies area to be erased from
image margins when scanning
documents with the ADF.
Top/Bottom/Right/Left: set the value from
0 to 15mm (can be changed by 1mm)
Top/Bottom/Right/Left:
0mm
3
Page Edge Filler(FB)
Specifies area to be erased from
image margins when scanning
documents with the Flatbed.
Top/Bottom/Right/Left: set the value from
0 to 15mm (can be changed by 1mm)
Top/Bottom/Right/Left:
0mm
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
1|2
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
7.1 Online setup (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
The following shows the contents of the setup:
2 BASIC SCANNER OPERATION
No
Meaning
Description
Selectable parameter
The initial value
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4
Dropout Color
Use this function to drop out a color in
Grayscale or Binary mode.
Red/Green/Blue/White
Green
5
Pre pick
Select "Yes" to enable Prepicking,
otherwise select "No".
YES/NO
YES
6
Consumable counter
You can estimate the service life of
consumables by checking these
counters. Be sure to reset the counter
when you replaced any consumable.
To reset
7
Offset adjustment
Set the horizontal and vertical offset for
scanning.
ADF(front)/ADF(back)/Flat bed
Main: -2 to 3 (can be changed by
0.5mm)
Sub: -2 to 3 (can be changed by
0.5mm)
Right & left : 0mm
Top & bottom : 0mm
8
Vertical magnification Adjustment
Set the magnification of a scanned
image.
ADF/Flat bed: -6.3% to 6.3%
(can be changed by 0.1%)
0%
9
Power saving
Set the waiting time for the scanner to
switch into the power save mode
You can set the waiting time
from 5 minutes to 55 minutes
(can be changed by 5 minutes)
15minutes
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
1|2
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
7.2 Double-feed detection
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
The settings for the double feed detection are as follows.
1. Click [Device Setting 2] tab, then select [DoubleFeed] from [Preferences].
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2. When you select [Check Length] or [Check overlapping and length], select [Length] from 10, 15 or 20mm.
None : The double feed detection will not be performed.
Check Length : The documents length will be monitored.
Check Overlapping : Document overlapping will be monitored.
Length and Overlapping : "Check overlapping and length: The document length (you can select error detection tolerance from 10, 15 or
20mm) and overlapping will be monitored. If the detected length deviation is within the specified tolerance, it will not be detected as an error. "
HINT
Change the double feed configure of the FUJITSU TWAIN32 Scanner driver before you change the double feed configure in the [Software
Operation Panel]. It will take precedence FUJITSU TWAIN32 Scanner driver.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
7.3 Setting of Page Edge Filler
Introduction
1 NAMES AND FUNCTIONS OF PARTS
1. When you scan documents with the ADF, click [Device Setting 2] tab, and select [PageEdgeFille(ADF)] from [Preferences]. Then
specify the area to delete by entering value in [Top], [Bottom], [Right] and [Left].
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
HINT
10 SCANNER SPECIFICATIONS
Appendix
If you configure the Page Edge Filter in both [Software Operation Panel] and [FUJITSU TWAIN32 Scanner Driver], the images of [Software
Operation Panel] configuration will overwrite the images of FUJITSU TWAIN32 Scanner Driver configuration.
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
7.3 Setting of Page Edge Filler (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2. When you scan documents with the Flatbed, click [Device Setting 2] tab, and select [PageEdgeFille(FB)] from [Preferences]. Then
specify the area to delete by entering value in [Top], [Bottom], [Right] and [Left].
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
HINT
Appendix
If you configure the Page Edge Filter in both [Software Operation Panel] and [FUJITSU TWAIN32 Scanner Driver], the images of [Software
Operation Panel] configuration will overwrite the images of FUJITSU TWAIN32 Scanner Driver configuration.
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
7.4 Setting dropout color
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
Set a color to be dropped out as follows.
1. Click [Device Setting 2] tab, and select [Dropout color] from [Preferences].
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2. Mark the check box of the color to be dropped out (Red, Green, Blue and White).
Red : Red will be dropped out.
Green : Green will be dropped out.
Blue : Blue will be dropped out.
White : No dropout
HINT
It will take precedence FUJITSU TWAIN32 Scanner driver configuration.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
7.5 Setting of pre-pick mode
Introduction
1 NAMES AND FUNCTIONS OF PARTS
The settings of the pre-pick mode are as follows.
1. Click [Device Setting 2] tab, and select [Pre-Pick] from [Preferences].
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
●
●
Appendix
Yes : The setting prioritizes for the processing speed. The next document will be fed to the pick roller automatically.
No : The next document won't be fed to the pick roller automatically.
HINT
It will take precedence FUJITSU TWAIN32 Scanner driver configuration.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
7.6 Resetting the consumables counters
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
Reset the consumables counters as follows.
1. Click [Device Setting] tab.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2. Click [Clear] button beside [Brake Roller] or [Pick Roller Unit].
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
7.7 Adjusting The Offset
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
The settings for adjusting the offset are as follows.
1. Select [Device Setting] tab and click [Offset] button.
>> The following panel appears.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2. Change the value at [Main] and [Sub] to specify the offset for scanning.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
7.8 Adjust the magnification
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
The the setting for the magnification is as follows.
1. Select [Device Setting] tab and click [Offset] button.
>> The following panel appears.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
2. Using the slider control under [Vertical magnification Adjustment], specify magnification scale.
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
7.9 Power saving
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
The setting for the power saving is as follows.
1. Select [Device Setting] tab.
2. Using the slider control under [Power saving], specify waiting time for switching the scanner operation to power save mode.
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Chapter 8 DOCUMENT SPECIFICATION OF ADF
Introduction
1 NAMES AND FUNCTIONS OF PARTS
This chapter describes the required document sizes and paper quality for ensuring a correct operation when scanning documents on the ADF.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
8.1 Document size
8.2 Document quality
8.3 Maximum ADF capacity
8.4 Area not to be perforated
8.5 Double feed detection conditions
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
8.1 Document size
Introduction
1 NAMES AND FUNCTIONS OF PARTS
The following shows the size of documents that can be scanned.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
8.1 Document size
8.2 Document quality
8.3 Maximum ADF capacity
8.4 Area not to be perforated
8.5 Double feed detection conditions
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Maximum
Minimum
A
B
A
B
297 (11.7 in.)
431 (17 in.)
53 (2.0 in.)
74 (2.9 in.)
(Unit: mm)
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
8.2 Document quality
Introduction
2 BASIC SCANNER OPERATION
It is recommended to use documents of wood free paper and wood containing paper. When using other kinds of papers, perform a testscanning with a few sheets of the same type before executing the actual task in order to check whether or not the documents can be
scanned.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Paper thickness is expressed by "paper weight".
4 DAILY CARE
Following paper weights can be used with this scanner:
5 REPLACING CONSUMABLES
A4/Letter and under : 41g/m2 - 203 g/m2
Larger than A4/Letter : .52 g/m2 -203g/m2
6 TROUBLESHOOTING
(A3 is the maximum size )
7 ONLINE SETUP
The following documents may not be scanned successfully:
8 DOCUMENT SPECIFICATION OF ADF
Documents of non-uniform thickness (e.g. Envelope, etc.)
Wrinkled or curled documents
Folded or torn documents
Tracing paper
Coated paper
Carbon paper
Carbonless paper
Photo sensitive paper
Perforated or pounced documents
Documents that are not square or rectangular
Very thin documents
1 NAMES AND FUNCTIONS OF PARTS
8.1 Document size
8.2 Document quality
8.3 Maximum ADF capacity
8.4 Area not to be perforated
8.5 Double feed detection conditions
9 OPTIONS
1|2
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
8.2 Document quality (Continued)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
Do not use the following documents:
●
●
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
●
●
●
HINT
●
6 TROUBLESHOOTING
Paper-clipped or stapled documents
Documents on which the ink is still wet
Documents smaller than A8 (Portrait) in size
Documents wider than A3 or 11 in. x 17 in. size
Documents other than paper such as fabric, metal foil, or transparencies
●
When scanning semi-transparent documents, set the density to light to avoid bleed through.
To prevent the rollers from becoming dirty, avoid scanning documents containing large areas written or filled in pencil. If scanning of such
documents is inevitable, clean the rollers more frequently.
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
8.1 Document size
8.2 Document quality
8.3 Maximum ADF capacity
ATTENTION
Carbonless paper contains chemical substances that may harm the Pad ASSY or rollers (e.g. Pick roller) when documents are fed. Pay
attention to the following:
Cleaning :
If pick errors occur frequently, clean the Pad ASSY and the Pick roller. For details on clean the Brake roller and the Pick roller set. For details
on cleaning the Brake roller and the Pick roller set, refer to "4.2 Cleaning the ADF".
8.4 Area not to be perforated
8.5 Double feed detection conditions
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Replacing parts :
The service life of the Pad ASSY and the Pick roller may be shortened compared to the case of scanning wood containing paper documents.
When scanning wood containing paper, the life of the Pad ASSY and the Pick roller may be shortened compared to the case of scanning
wood free paper.
HINT
When using the ADF, the leading edge of all document sheets must be evenly aligned. Make sure that curling at the leading edge is within
the following tolerances:
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
8.3 Maximum ADF capacity
Introduction
1 NAMES AND FUNCTIONS OF PARTS
The maximum number of sheets that can be loaded on the ADF paper chute is determined by the size and weight of the documents. The
following shows the maximum document loading capacity of the ADF according to the paper weight.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
8.1 Document size
8.2 Document quality
8.3 Maximum ADF capacity
8.4 Area not to be perforated
8.5 Double feed detection conditions
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Small Size:
The documents of A4/Letter or smaller size.
Large Size:
The documents over A4/Letter size.
Unit
Conversion
g/m2
41
52
64
75
80
90
104
127
203
lb
11
13.9
17.0
20.0
21
24.0
27.9
34.0
54
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
8.4 Area not to be perforated
Introduction
1 NAMES AND FUNCTIONS OF PARTS
When using the ADF, document trouble might occur if there is any pouched hole in the shaded area in the following figure.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
8.1 Document size
8.2 Document quality
8.3 Maximum ADF capacity
8.4 Area not to be perforated
8.5 Double feed detection conditions
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
8.5 Double feed detection conditions
Introduction
1 NAMES AND FUNCTIONS OF PARTS
To obtain a correct monitoring and preventing miss detections of doublefeeds, the documents have to meet the following conditions.
2 BASIC SCANNER OPERATION
Check overlapping
3 SCANNING VARIOUS TYPES OF DOCUMENTS
Paper weight : 41 g/m2 - 203 g/m2 (10.9 lb to 53.9 lb)
4 DAILY CARE
Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the document.
5 REPLACING CONSUMABLES
Other paper shall not be glued within 35 mm (1.4 in.) of the vertical centerline of the document.
6 TROUBLESHOOTING
Check length
7 ONLINE SETUP
Document length deviation : 1 % or less
8 DOCUMENT SPECIFICATION OF ADF
Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the document.
8.1 Document size
Check overlapping and length
8.2 Document quality
Paper weight : 41 g/m2 - 203 g/m2 (10.9 lb to 53.9 lb)
8.3 Maximum ADF capacity
Document length deviation : 1 % or less
8.4 Area not to be perforated
Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the document.
8.5 Double feed detection conditions
Other paper shall not be glued within 35 mm (1.4 in.) of the vertical centerline of the document.
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
HINT
When the overlapping check is specified, the papers which contact closely each other, such as glued paper or electro-statically charged
paper, can result in the miss-detection of double-feed.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Chapter 9 OPTIONS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
This chapter describes the options for fi-5750C Image Scanner.
fi-5750C Image Scanner option.
3 SCANNING VARIOUS TYPES OF DOCUMENTS
No.
Name
Spec
Description
4 DAILY CARE
1
Document holding pad (black)
PA03338-D960
Black background for Flatbed, which is replaced easily by user.
5 REPLACING CONSUMABLES
2
Image Processing Software Option
PA43400-D72201
For image processing (Binarizaiton)
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
9.1 Additional memory board
10 SCANNER SPECIFICATIONS
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Chapter 9 OPTIONS (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
9.1 Additional memory board
2 BASIC SCANNER OPERATION
When this option is installed on the scanner, it improves scanning performance at higher resolution setting. (For example, scanning operation
will not be interrupted at both sides colored 401dpi or higher resolution .)
3 SCANNING VARIOUS TYPES OF DOCUMENTS
1. Remove the screws on the rear side of the scanner, and remove the covers.
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
2. Insert the memory board into the slot and push it down so that the board is fixed with claws.
9.1 Additional memory board
10 SCANNER SPECIFICATIONS
Appendix
3. Secure the screws to fix the covers.
The following memory boards are recommendable for using with fi-5750C Color Image Scanner.
Manufacturer
Model
Memory Size
Micron Technology
MT4LSDT1664HG-13E
128MB
Micron Technology
MT8LSDT3264HG-13E
256MB
HINT
If you confirm the additional memory board is completely insatalled, you check the scanner memory value of [standard information] on
[Device information] panel in [Software operation panel].
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Chapter 10 SCANNER SPECIFICATIONS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
This chapter lists the scanner specifications.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
10.1 Basic Specification
10.2 Installation specification
10.3 External dimensions
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
10.1 Basic Specifications
Introduction
1 NAMES AND FUNCTIONS OF PARTS
No.
Items
Specification
2 BASIC SCANNER OPERATION
1
Operating method
Automatic Document Feeder(ADF), Flatbed(FB)
3 SCANNING VARIOUS TYPES OF DOCUMENTS
2
Image sensor
Color CCD (Charge-coupled device) x 3
Front/Back/Flatbed
4 DAILY CARE
3
Light source
5 REPLACING CONSUMABLES
4
Scanning area
5
Paper weight
6
Scanning speed (A4, Portrait, 200dpi)
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
Remarks
Incandescent cold cathode fluorescent lamp x6
Front/Back/Flatbed
Min.
A8 (Portrait)
Note *1
Max.
A3 or 11x17 Long page scanning : 297x863mm
Note *2
41 g/m2 to 203 g/m2
at ADF scanning
Simplex
55 ppm
Duplex
110 ipm
ADF
9 OPTIONS
FB
Black&White
Grayscale/Color
Note *3
0.9 sec.
10 SCANNER SPECIFICATIONS
10.1 Basic Specification
10.2 Installation specification
10.3 External dimensions
Appendix
7
Capacity of ADF
A4, 80 g/m2
Note *4
200 sheets
*1 The minimum size for scanning is A8 when using the ADF to scan.When using the Flatbed to scan the scanning range is unlimited.
*2 Long page scanning is enabled in case of ADF scanning.
*3 The scanning speed is the maximum speed of the scanner hardware. Software processing time such as data transfer time is added to the
actual scanning time.
*4 The maximum stacking capacity values according to the document thickness.
*5 The SCSI and USB interfaces cannot be used at the same time.
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
10.1 Basic Specifications (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
No.
Items
Specification
2 BASIC SCANNER OPERATION
8
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
600 dpi
Output
50 dpi to 600 dpi
Black&White
Grayscale/Color
Optical resolution
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
Remarks
Basic
9
Grayscale level
8 bits/pixel (Color), 8 bits/pixel (Grayscale), 1 bit/pixel (Binary)
10
Halftone Patterns
Dither, Error diffusion
11
Interface
Ultra SCSI
Shield-type 50pin(pin type) halfpitch
USB 2.0/1.1
B type
Note *5
7 ONLINE SETUP
12
Other function
Hard real time JPEG compression
Grayscale/Color
8 DOCUMENT SPECIFICATION OF ADF
1|2
9 OPTIONS
10 SCANNER SPECIFICATIONS
10.1 Basic Specification
10.2 Installation specification
10.3 External dimensions
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
10.2 Installation specifications
Introduction
1 NAMES AND FUNCTIONS OF PARTS
Items
Specification
2 BASIC SCANNER OPERATION
Width
Depth
Height
690 mm
500 mm
342 mm
Dimension(Without ADF paper chute and stacker)
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
Installation space (ADF position : standard)
1030mm x 700mm x 430mm(Width x Depth x Height)
Weight
35kg
6 TROUBLESHOOTING
Input power
Voltage range
AC100V - 240V, +-10%
Phases
Single-phase
Frequency range
50/60 +- 3 Hz
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
Power consumption
9 OPTIONS
216 W or less
Device status
Operating
Not operating
Temperature
5-35 deg C
(41 to 95 deg F)
-20-60 deg C
(-4 to 140 deg F)
Humidity
20-80%
8-95%
10 SCANNER SPECIFICATIONS
Ambient condition
10.1 Basic Specification
10.2 Installation specification
10.3 External dimensions
Appendix
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
10.3 External dimensions
Introduction
1 NAMES AND FUNCTIONS OF PARTS
The external dimension of the fi-5750C Image Scanner
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
10.1 Basic Specification
10.2 Installation specification
10.3 External dimensions
Appendix
1|2
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
10.3 Physical dimensions (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
10.1 Basic Specification
10.2 Installation specification
1|2
10.3 External dimensions
Appendix
(Side View)
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Appendix
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
The Appendix is structured as follows:
Appendix 1 Before using [Scan] button and [Send to] button
Appendix 2 Glossary
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Appendix 1 "Scan" button and "Send to" button
Appendix 2 Glossary (Not available in this manual.)
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Appendix 1 Before using [Scan] button and [Send to] button
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
By setting the link of the application software to the [ Scan ] button and [ Send to ] button, you can launch the linked application by simply
pushing the button.
For Windows 98, Windows Me, Windows 2000 and Windows XP:
1. Select [ Control panel ] from the [ Start ] menu.
2. Select [ Property ] from [ Scanner & Cameras ].
3. Select the [ Event ] tab.
4. Select the event. For Windows XP, select event to be performed by the application from the [ Select event ] menu.
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Appendix 1 Before using [Scan] button and [Send to] button
Appendix 2 Glossary (Not available in this manual.)
With this function, the next events can be selected.
Scan button (When clicking on [ Scan ] button)
Feeder loaded with paper (When document are loaded on the ADF)
Send to 1~9(When clicking the [ Send to ] button)
1|2|3
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Appendix 1 Before using [Scan] button and [Send to] button (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
5. Select the application executed by the event. For Windows XP, select [ Performing selected program ] under [ Performing ] and then
select the application to be processed.
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Appendix 1 Before using [Scan] button and [Send to] button
Appendix 2 Glossary (Not available in this manual.)
6. Click [ OK ]
HINT
When loading documents on the ADF, a pop-up screen may be displayed. In order to avoid displaying the pop-up screen, to select
[ Feeder loaded with paper ] at [ Selecting event ] , and to select [ Nothing to do ] under [ Performing ] and click [ OK ].
The displayed screen may differ slightly according to your OS.
1|2|3
All Rights Reserved, Copyright (C) PFU LIMITED 2003
CONTENTS
Appendix 1 Before using [Scan] button and [Send to] button (Continued from the previous page)
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
-For Windows 95 and Windows NT 4.0:
1. Right click [ FUJITSU Scanner Control Center ] on the task trail and select [ Option ].
2. Select the event for starting up the application from the [ Event ] menu.
With this function, the next events can be selected.
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Appendix 1 Before using [Scan] button and [Send to] button
Appendix 2 Glossary (Not available in this manual.)
Start/Scan (When pushing the [ Scan ] button)
Send to 1~9(Function button to switch the number when pushing the [Send to] button.
3. Click [ ... ] button right to the entry field of [Path].
4. Click [ OK ].
1|2|3
All Rights Reserved, Copyright (C) PFU LIMITED 2003
Download PDF

advertising