User`s manual | Fujitsu P42HHA10A Flat Panel Television User Manual

English
USER’S MANUAL
42”/50” WIDE PLASMA DISPLAY
P42VHA10W/P42VHA10A/
P42HHA10W/P42HHA10A/
P50XHA10W/P50XHA10A/P50XHA10U/
P42VHA20W/P42VHA20A/P42VHA20U
Contents
Page
Before Use
• Safety Precautions ··································· E-2–E-3
• Features ····························································E-4
• Accessories ······················································ E-5
• Handy Tips ······················································· E-5
• Installation ······················································· E-6
Usage
• Part Names and Functions ···················· E-7–E-10
• Using the Remote Control ··················· E-11–E-12
• Connecting the Display to External Equipment
······························································· E-13–E-17
• Basic Operations ·································· E-18–E-19
• Selecting Input Mode ·····································E-20
• Other Basic Operations ································· E-21
• Watching Pictures on the Wide Screen
······························································· E-22–E-23
Page
Adjustments
• Adjustment Menu ········································· E-24
• Adjusting Pictures (PICTURE Menu) ··· E-25–E-27
• Adjusting Screen Position and Size
(POSITION/SIZE Menu) ························ E-28–E-29
• Adjusting AUDIO (AUDIO Menu) ········ E-30–E-31
• Other Adjustments (FEATURES Menu)
······························································· E-32–E-38
• Initialization of User Adjustment Value
(FACTORY DEFAULT) ·····································E-39
Others
• Options ····························································E-40
• Factory Settings ············································ E-41
• Specification ········································· E-42–E-44
• Cleaning and Maintenance ···························· E-45
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the
safety precautions.
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Consult your product dealer for details.
SAFETY PRECAUTIONS
IMPORTANT INFORMATION
IMPORTANT
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING: This is a Class A and Class B product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
FCC NOTICE
• P42VHA10W/P50XHA10W: A Class A digital device
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
• P42VHA10A/P42HHA10W/P42HHA10A/P50XHA10A/P50XHA10U/P42VHA20W/P42VHA20A/P42VHA20U: A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT SAFETY INSTRUCTIONS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards
incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important
Safeguards” carefully before use.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier’s) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
E-2
Power supply voltage:
AC 100–125 V
(42”10W, 42”U, 50”U Type:
Included)
AC 200–240 V
(42”20W, 50”W Type:
Included)
AC 240 V (SAA TYPE)
(42”A, 50”A Type:
Included)
E-3
English
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, dose not operate normally, or has been dropped.
– Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
– Do not use attachments not recommended by the product manufacturer as they may cause hazards.
– Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire,
electric shock, or other hazards.
– The apparatus shall not be exposed to dripping or splashing.
– No objects filled with liquids, such as vases, shall be placed on the apparatus.
– Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious
damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount
recommended by the manufacturer.
– When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the
product and cart to overturn, damaging equipment or causing possible injury to the operator.
– Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from
overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed,
sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided and the manufacturer’s instructions have been adhered to.)
For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.
– This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power
supply of your home, consult your product dealer or local power company.
– This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug
into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.
– Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay
particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.
– For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.
– Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric
shock.
– Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill liquid of any kind on the product.
– Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.
Refer all service to qualified service personnel.
– Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following
the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
– When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with
same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
– Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
– The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products
(including amplifiers) that produce heat.
– When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection
against electric shock.
– Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special
hazards when overheated.
– Use only the accessory cord designed for this product to prevent shock.
The power supply voltage rating of this product is AC110–240 V (42”10W/A) and AC220–240 V (50”W/A, 42”20W/A type) and AC 120
V (U type), and the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our
dealer to ensure Safety and EMC.
When it is used with other power supply voltage, the power cable must be changed.
Use the standard power plug and cord set of the specified country.
Power cord
Consult your product dealer.
FEATURES
Variety of input signals
• The unit features four video and four S-video input terminals, and five component video terminals.
• In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling DVI standard (HDCP*) high
definition picture quality.
• Depending on the model, the display supports video input for different color television systems as follows: NTSC, PAL, SECAM,
PAL60, N-PAL, M-PAL, 4.43NTSC.
Desired screen size
• This display offers a total of five different screen sizes in video input mode: Normal, Wide1, Wide2, Zoom1, and Zoom2.
A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures.
• The display has a Compose mode to switch screen size automatically depending on the contents of software.
• Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.
Picture quality
• Pro-setting allows adjustment for even higher picture quality.
• Noise reduction function reduces noise to ensure clear pictures.
• A display suitable for such film materials as movie pictures can be made by 24 frame mode function.
Convenient power saving setting
• When no video signal is input to the display or the remote control is not operated for a long time, this function automatically reduces
the power consumption of the unit.
Others
• The white screen and screen orbiter functions are available to minimize phosphor burn-in.
• 3 audio input terminals and 20W + 20W (42”) / 12W + 12W (50”) external speaker output terminal are available.
* The HDCP (High-bandwidth Digital Content Protection) function ensures that high-vision digital contents (movies, etc.) provided with
copy-guard protection can be displayed on the plasma display.
E-4
CHECKING ACCESSORIES
One remote control Two AA batteries
One user’s manual
One power cable
Two big ferrite
cores
Two small ferrite
cores
Manual
(42”10W, 42”20U,
50”U Type)
(42”20W, 50”W Type)
(42”A, 50”A Type)
HANDY TIPS
• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet (42”)/
1.9 m or 6.3 feet (50”)) from the screen and to look occasionally away while working.
• Have the display inspected and cleaned by your dealer at regular intervals.
• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a
prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly
displayed for long periods. (See P. E-37–E-38.)
• The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however,
that some pixels constantly remain lit or dimmed.
• The display has a fan to prevent its internal temperature from rising.
• Be careful with the air delivered by the fan. It may be very hot.
• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.
You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote
control does not function properly.
• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer
for more information.
• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see
that the power indicator lamp flashes red.
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on
P. E-45, or contact your dealer.
Information
Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.
E-5
English
ACCESSORIES
INSTALLATION
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer
performs the installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.
To ensure proper heat radiation, provide at least as much space around the display as shown below.
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.
* Never attempt to tilt the display sideways or backward.
* To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.
* The display can be installed with either of its sides facing down.
Side
Front
(cm)
Upper
(cm)
10
Left
10
10
Right
Wall
5
Lower
4
Note
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing
materials originally supplied with the display when repacking it.
Reference
See P. E-40 for more information on options.
E-6
English
PART NAMES AND FUNCTIONS
DISPLAY SECTION – FRONT
(Right section)
1 Power indicator lamp
This lamp shows the state of the power supply.
Lit (red):
Stand-by
Lit (green):
Power ON
Lit (orange):
Power saving (DPMS: Power saving
function) mode ON (See P. E-36.)
Flashing (red): Malfunction (Flashes differently depending
on the type of malfunction. See P. E-45 for
more information.)
2 Remote control signal receiver
Receives signals from the remote control.
3 Input mode selector button
[MODE]
4 Input mode selector button
[MODE]
Switches between picture input modes.
5 VOL + button
6 VOL – button
①
②
Adjusts the sound volume.
⑨
7 Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
8 ON/OFF button
Turns the power “ON” and “OFF (standby state)”.
Control Panel (Right side of display)
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
E-7
PART NAMES AND FUNCTIONS (Continued)
DISPLAY SECTION – LOWER PART
Bottom (P42VHA10 type)
Bottom (P42HHA10 type)
Bottom (50”)
Bottom (P42VHA20 type)
1
/I power switch
When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON ” state, and the power
can be turned “ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON ” state,
the power indicator lamp goes out and the display is placed in the “OFF” state where power is still partly supplied.
2 RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
3 RGB1 input terminal (RGB1 INPUT/DVI-D)
Connect this terminal to the PC’s display (digital RGB) output terminal.
*The connection cable No.88741-8000 made by molex Inc. is recommanded.
4 RGB2 input terminal (RGB2 INPUT/mD-sub)
Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.
5 Power input terminal
Connect this terminal to the power cable supplied with the display.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
E-8
English
6 External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)
*See the speaker instruction manual for more information.
7 Audio1 input terminal (AUDIO1 INPUT)
8 Audio2 input terminal (AUDIO2 INPUT)
9 Audio3 input terminal (AUDIO3 INPUT)
Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-36 for the selection of audio input for video input.)
0 Component video input terminal (VIDEO3 INPUT)
Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.
A S-Video input terminal (VIDEO2 INPUT)
Connect this terminal to the S-video output terminal of your VCR.
B Video input terminal (VIDEO1 INPUT)
Connect this terminal to the video output terminal of your VCR.
C Component video input terminal (VIDEO4 INPUT)
Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.
Description of Input Terminals
DVI-D terminal (RGB1 INPUT/DVI-D)
RGB2 input terminal (RGB2 INPUT/mD-sub)
RS-232C terminal (RS-232C)
Pin No.
Input signal
Pin No.
1
Red
9
Input signal
2
Green
10
Ground
3
Blue
11
—
4
—
12
—
5
Ground
13
Horizontal synchronization
6
Ground
14
Vertical synchronization
7
Ground
15
—
8
Ground
Frame
Ground
—
Pin No.
Signal
1
DCD (Data Carrier Detect)
2
RD (Received Data)
3
TD (Transmit Data)
4
DTR (Data Terminal ready)
5
GND (Ground)
6
DSR (Data Set Ready)
7
RTS (Request To send)
8
CTS (Clear To Send)
9
RI (Ring Indication)
E-9
PART NAMES AND FUNCTIONS (Continued)
REMOTE CONTROL
For details, see page
1
.
2 MUTE button
button
Switches between power ON and standby
state.
3 DISPLAY OFF button
4 PICTURE MODE button
7 RGB input mode selector button
[RGB 1 – 2]
Selects RGB 1 – 2.
8 RGB3/VIDEO4 input mode selector
button [RGB3/VIDEO4]
Selects VIDEO4.
9 Video input mode selector button
[VIDEO 1 – 3]
Selects VIDEO 1 – 3.
–
Use this button to display a desired menu
for adjusting the picture.
–
Press this button to finalize the selection of
a desired menu or option within a menu.
E-10
6 WIDE button
Switches the screen over to a desired wide
screen.
Switches the picture mode.
B Enter button [ENTER]
5 PICTURE MEMORY button
Recalls the PICTURE MEMORY.
For showing on-screen-information.
A Menu button [MENU]
Temporarily mutes the sound.
0 Volume adjustment buttons
[VOL +/– ]
Adjust the volume.
Press the + button to increase the volume.
Press the – button to reduce the volume.
C Adjustment buttons [
–
/
/
/
]
Use these buttons to scroll through options
in a menu.
English
USING THE REMOTE CONTROL
PUTTING BATTERIES IN THE REMOTE CONTROL
1 To remove the cover, slide it
outwards while pressing it down.
2 Place two AA batteries in the
remote control. Make sure that the
batteries are properly oriented.
3 Close the cover until it snaps into
place.
PRECAUTIONS
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or
heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.
CAUTION: Be sure to use replacement batteries of the same type as the original ones.
When disposing of used batteries, please comply with governmental regulations or environmental
public institution’s rules that apply in your country/area.
Note
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.
Do not use rechargeable batteries (Ni-Cd).
E-11
USING THE REMOTE CONTROL (Continued)
EFFECTIVE RANGE FOR THE REMOTE CONTROL
Point the remote control at the display’s signal receiver when using it.
Make sure that there are no obstacles between the remote control and the display’s signal receiver.
Upper
20°
20°
Lower
Display – side
Left
30°
30°
Right
5 m (Front)
Display – front
Information
The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the
remote control from a different position.
E-12
Be sure to turn OFF the power to the display and external equipment before making any connections.
No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC
model. Contact your dealer for more information.
RECEPTACLE
Make sure that the power cable’s grounding wire is grounded.
The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you
will need to have it replaced. Contact your dealer for more information.
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
Carefully check the terminals for position and type before making any connections.
Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.
Ferrite cores
These ferrite cores are used to attenuate undesired signals.
Two big ferrite cores
When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal.
Power Cable
Ferrite Core
RS-232C Cable
Ferrite Core
Two small ferrite cores
When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.
Ferrite Core
Ferrite Core
E-13
English
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS
Speaker
Display
Speaker (optional)
Remote
control
VCR or other external components See P.
VCR
Satellite tuner
PC
DVD player
E-14
English
VCR
• Connect the video signal cable to either the S-video input terminal or the video input terminal.
To audio
outputs
To video output
To S-video output
To audio inputs
To S-video input
To video input
Bottom of Display (Ex.: P42VHA10)
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
E-15
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)
DVD PLAYER
• Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.
• If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video
terminal.
To video output
To audio
outputs
To S-video output
To component video output
To audio
inputs
To
component
video input
To S-video
input
To video input
Bottom of Display (Ex.: P42VHA10)
SATELLITE TUNER
• Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.
• If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video
terminal.
To video output
To S-video output
To component video output
To component
video input
To audio outputs
To audio
inputs
To S-video
input
To video input
Bottom of Display (Ex.: P42VHA10)
E-16
• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.
• The PC can be connected to either the front side or the rear side, whichever is most convenient.
To RGB output (DVI-D)
To RGB output (mD-sub)
To RGB2
input
(mD-sub)
To audio output
To audio
input
To RGB1 input
(DVI-D)
Bottom of Display (Ex.: P42VHA10)
Note
• Unplug the power cord from the AC outlet before you connect external components.
• Also refer to the instructions for the component to be connected.
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.
E-17
English
PC
BASIC OPERATIONS
TURNING THE POWER ON AND OFF
1
Press /I to the left at the bottom
of the display to the ON state.
The power lamp lights up.
2
Press
3
Press
on the remote control.
The color of the power lamp changes from “Red”
to “Green”.
–
or
–
or
.
Select the video mode to be input.
Press
when the power is ON.
The color of the power lamp changes from
“Green” to “Red” and the power turns “OFF”.
* You can also use the buttons
on the display’s control
panel to perform these steps.
E-18
English
ADJUSTING THE VOLUME
Press the Volume button
Press
to increase the volume.
Press
to reduce the volume.
Any value between 0 and 40 can be selected.
* Note that the volume level remains stored even when you
turn OFF the power.
When the volume adjustment button is pressed
Muting the sound
Press
.
The sound is removed.
Press again to restore the sound to the original level.
The mute mode can also be released by pressing the volume
buttons.
E-19
SELECTING INPUT MODE
VIDEO INPUT MODE
1
Press the
–
buttons to
select the input mode.
You can select from VIDEO1 mode to VIDEO4
mode.
The video modes corresponding to each input
terminal are as follows.
• VIDEO1: Video
Video1 mode
• VIDEO2: S-video
• VIDEO3: Component video
• VIDEO4: Component video
* For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P. E-35.
* You can also use the buttons
on the display’s control
panel to perform these steps.
RGB INPUT MODE
1
Press
–
input mode.
to select the
You can select between the modes from RGB1 to
RGB2.
The input terminal of each RGB mode is as
follows.
• RGB1: DVI-D
• RGB2: mD-sub
E-20
RGB1 mode
English
OTHER BASIC OPERATIONS
CONVENIENT FUNCTIONS
On-screen information (DISPLAY)
Press
.
The mode is indicated on the screen for 5 seconds.
Picture Mode (PICTURE MODE)
Press
.
This button can be used to switch the picture mode.
In the picture mode, you can switch between the set status and the fine mode.
* For the picture mode settings, see “Setting Picture Mode (P. E-26)”.
Picture Memory (PICTURE MEMORY)
Press
.
This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is
pressed, the setting changes as follows.
* For the picture memory settings, see “Picture Memory (P. E-27)”.
E-21
WATCHING PICTURES ON THE WIDE SCREEN
SWITCHING BETWEEN SCREEN SIZES
1
Press
2
Press
to select a desired
picture mode.
.
The currently selected mode will appear.
Each time you press , a different picture mode
appears. The sequences used are as follows:
Normal mode
When you are in a Video or S-video input mode
When you are in a Comp.video input mode
When you are in an RGB input mode
Wide1 mode
* You can also use the buttons
on the display’s control
panel to perform these steps.
* Depending on the type of signal, some aspects
may not be selected.
Note
• Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.
• A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same
aspect ratio.
• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making
purposes or for a public audience may constitute a copyright infringement.
For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.
Reference
See P. E-28–E-29 for how to adjust the picture size and position.
E-22
English
SCREEN SIZE
Normal
Displays pictures of normal size (i.e., a 4:3 aspect ratio).
Auto
The screen size changes automatically in accordance with the contents of image software
you use.
Wide1
Displays natural-looking pictures of standard size on the wide screen.
Picture of
standard size
Wide1
Vertically
extended picture
Wide2
Horizontally
extended picture
Zoom1
Horizontally extended
picture with caption
Zoom2
Wide2/Wide
Ideal for displaying vertically extended pictures such as squeezed pictures and recorded
HDTV programs.
Zoom1/Zoom
Enlarges horizontally extended pictures equally in all directions to maintain the aspect
ratio constant.
Zoom2
Reduces the height of horizontally extended pictures with captions, without eliminating
the caption. Only the height of pictures is reduced, not the height of the caption.
(Captions may not be easy to read, however, depending on the picture.)
ASPECT RATIO
The following aspect ratios are available.
4:3 aspect ratio
(VHF/UHF broadcasting, BS broadcasting)
4
16:9 aspect ratio
(HDTV broadcasting)
16
3
9
1.85
1.85:1 aspect ratio
(Vista Vision size)
1
2.35
2.35:1 aspect ratio
(Cinema Vision size)
1
Information
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema
Vision size i.e., the sizes used frequently for picture software.
E-23
ADJUSTMENT MENU
ADJUSTMENT MENU
MENU
PICTURE
Contrast
POSITION/SIZE
Brightness
AUDIO
Color
FEATURES
Tint
FACTORY DEFAULT
Sharpness
Picture Mode
PrecisionSetting
Luminance
Noise Reduction *
Black Level
Picture Memory
Colour Temp.
Position
Size
Can be set when Fine is
selected as the Picture Mode.
User Colour Temp.
*: for other than RGB
Treble
Bass
Balance
Loudness
Adjustment
Dot Clock
for RGB2
Function
Clock Phase
for RGB2
On Screen Menu
Clamp Position
for RGB2, Comp. video
Input Terminal
Auto Calibration
for RGB2
24 Frame Mode
for Video
Others
OSD
Language
Name Select
Video Input
S-video Input
D-SUB Input
DVI Input
DPMS
for other than RGB1
Audio Input
Screen Orbiter
for RGB
Direct Setting
for RGB
Code Setting
for RGB2
White Screen
Exhibition Mode
Information
E-24
English
ADJUSTING PICTURES (PICTURE MENU)
BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]
You can make changes to all picture adjustment options in the PICTURE Menu.
The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any
changes.
1
Press
2
Press
.
The main menu screen will appear.
or
to select
“PICTURE”.
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE
POSITION/SIZE
AUDIO
“PICTURE” selected in the main menu
screen (Video Input Mode)
FEATURES
FACTORY DEFAULT
The PICTURE Menu screen will appear.
3
Press
“Tint”.
4
Press
or
to select
.
The “Tint” adjustment screen will appear.
“Tint” selected in the PICTURE Menu
screen (Video Input Mode)
5
Press
or
to change tint
values.
: More greenish colors
: More purplish colors
6
Press
to store.
Press
when you finish.
“Tint” adjustment screen
* Repeat steps 3, 4, 5 and 6 when you wish to
make changes to other options.
* When
is pressed after you have selected
“Default”, the settings are returned to those that
were valid when you purchased the set.
* On-screen information disappears if you do not take any action for about 60 seconds.
E-25
ADJUSTING PICTURES (PICTURE MENU) (Continued)
• Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart.
Select the item with
, and then adjust with
. Finally, press
to implement the adjustments.
Adjustment Item
Adjustment Range/Remarks
Contrast
Lower contrast
Higher contrast
–30 to +30
Brightness
Darker screen
Brighter screen
–60 to +60
Color
Lighter colors
Darker colors
–60 to +60
Tint
More purplish colors
More greenish colors
–60 to +60 (RGB, Comp. video)
–30 to +30 (Video, S-video)
Sharpness
Softer pictures
Sharper pictures
–4 to +4 (RGB)
–16 to +16 (other than RGB)
• Setting Picture Mode (Picture Mode)
Can set up the picture mode.
Each time you press
or
, one of the available choices appears in the following sequence:
Dinamic:Suitable for watching a normal motion picture.(Standard)
Fine: Suitable for watching a dark picture such as movie.
Real 1: Makes a strong contrast picture.
Real 2: Makes a bright color picture.
Static: Suitable for watching a still picture.
Press
to store.
*Select Dinamic, Fine, Real 1, Real 2 or Static to suit your taste.
• Precision Setting (for more advanced adjustment)
Luminance, Black Level, Color Temperature, and User Color Temperature are adjusted as shown in
the following chart.
Select the item with
adjustments.
Adjustment Item
, and then adjust with
. Finally, press
to implement the
Contents of Adjustments
Operation
Adjustment Range/Remarks
Luminance
Adjusts the luminance level.
(when the Picture Mode is Fine)
Use
to adjust.
40 to 100%
Black Level
Adjusts the picture when watching a dark
image. (when the Picture Mode is Fine)
Use
to adjust.
–15 to +15
Color Temperature
Set to low to obtain a warm atmosphere,
and set to high to obtain a cold atmosphere.
Use
to adjust.
–3500 to +3500
User Color
Temperature
Enables individual adjustment of Red,
Green and Blue.
Use
adjust.
E-26
to select, and use
to
0 to 255
English
• Setting Noise Reduction (Noise Reduction)
Can select the noise reduction setting corresponding to the noise level of the input signal.
Each time you press
or
,one of the available choices appears in the following sequence:
Off: Noise reduction does not function.
Min.: Weak setting
Std.: Standard setting
Max.: Strong setting
Press
to store.
*Some type of signal can not be selected.
• Storing the setting of PICTURE (Picture Memory)
Stores 8 patterns of adjustments set by PICTURE.
Read out and store to suit your taste.
In case of “Load”
When setting “Load”: Read out your desired Setting.
(1) Select “Picture Memory” and press
.
The “Picture Memory” screen will appear.
(2) Press
or
“Picture Memory” selection screen
to select Load.
(3) Select Data number to make Load.
(4) Press
to read out.
In case of “Save”
When setting “Save”: Set to suit your taste and store.
(1) Select “Picture Memory” and press
.
The “Picture Memory” screen will appear.
(2) Press
or
to select Save.
“Load” selection screen
(3) Select Data number to make Save.
(4) Press
to save.
* On-screen information disappears if you do not take any action for about 60 seconds.
E-27
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)
BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION]
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
1
Press
2
Press
.
The main menu screen will appear.
or
to select
“POSITION/SIZE”.
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE
POSITION/SIZE
AUDIO
“POSITION/SIZE” selected from the main
menu screen
FEATURES
FACTORY DEFAULT
The POSITION/SIZE Menu screen will appear.
3
4
5
Press
or
“Position”.
Press
to select
.
The “Position” adjustment screen will appear.
Press
,
,
or
to
change position values.
: Moves screen up.
: Moves screen down.
6
:
Moves screen to the right.
:
Moves screen to the left.
Press
to store.
Press
when you finish.
* Repeat steps 3 to 6 when you wish to make
changes to other options.
* When
is pressed after you have selected
“Default”, the settings are returned to those that
were valid when you purchased the set.
E-28
“Position” adjustment screen
English
Adjusting Screen Position (Position)
Horizontal position (Horizontal)
: Moves screen to the right.
: Moves screen to the left.
→
→
“Position” adjustment screen
Vertical position (Vertical)
: Moves screen up.
→
: Moves screen down.
→
Press
to store.
Adjusting Screen Size (Size)
Screen width (Width)
: Increases width.
: Reduces width.
→
→
“Size” adjustment screen
Screen height (Height)
Press
: Increases height.
→
: Reduces height.
→
to store.
*You cannot adjust screen size in RGB1 (DVI-D) mode.
Setting Range
Video, S-video mode
Comp.video mode
RGB mode
Position
Horizontal: -30 to +30
Vertical
Zoom:
-15 to +15
Others: -7 to +7
-16 to +16
-150 to +150
Size
-3 to +12 (P42HHA10)
-7 to +16 (P42VHA10/20)
-7 to +12 (P50XHA10)
-2 to +16 (P42HHA10)
-4 to +20 (P42VHA10/20)
-4 to +16 (P50XHA10)
-12 to +25 (P42HHA10)
-25 to +50 (P42VHA10/P50XHA10/
P42VHA20)
* Depending on the input signal, the adjustment range may differ.
* On-screen information disappears if you do not take any action for about 60 seconds.
E-29
ADJUSTING AUDIO (AUDIO MENU)
BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)]
You can make changes to all sound adjustment options in the AUDIO Menu.
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
1
2
Press
.
The main menu screen will appear.
Press
or
to select “AUDIO”.
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE
POSITION/SIZE
AUDIO
“AUDIO” selected in the main menu screen
FEATURES
FACTORY DEFAULT
The AUDIO Menu screen will appear.
3
Press
or
“Balance”.
4
Press
to select
.
The “Balance” adjustment screen will appear.
“Balance” selected in the AUDIO Menu
screen
5
Press
or
to adjust the
balance.
: Higher volume from the right-hand speaker
: Higher volume from the left-hand speaker
6
Press
to store.
Press
when you finish.
* Repeat steps 3 to 6 when you wish to make
changes to other options.
* Audio Input menu will not be displayed when
“No Audio” is selected. (See P. E-36.)
E-30
English
Adjusting Treble (Treble)
Any value between -6 and +6 can be selected.
: Stronger treble
: Weaker treble
Adjusting Bass (Bass)
Any value between -6 and +6 can be selected.
AUDIO Menu screen
: Stronger bass
: Weaker bass
Adjusting Volume Balance (Balance)
Any value between -10 and +10 can be selected.
: Higher volume from the right-hand speaker
: Higher volume from the left-hand speaker
Setting Loudness (Loudness)
Corrects the balance between bass and treble for easy listening even with weak volume.
Each time you press
sequence:
On
or
, one of the available choices appears in the following
Off
On : Corrects bass and treble.
Off : Loudness dose not function.
* On-screen information disappears if you do not take any action for about 60 seconds.
E-31
OTHER ADJUSTMENTS (FEATURES MENU)
BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]
You can make the following changes in the FEATURES Menu.
1
2
Press
.
The main menu screen will appear.
Press
or
to select
“FEATURES”.
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE
POSITION/SIZE
AUDIO
“FEATURES” selected in the main menu
screen
FEATURES
FACTORY DEFAULT
The FEATURES Menu screen will appear.
3
Press
or
Screen Menu”.
to select “On
• Select a desired option for adjustment/setup from
Adjustment, Function, On Screen Menu, Input
Terminal and Others.
4
Press
5
Press
or
“Language”.
6
Press
7
Press
language.
8
Press
.
On Screen Menu screen
• On Screen Menu appears.
to select
.
The “Language” selection screen will appear.
“Language” selection screen
or
to select the
.
The menu is displayed in the selected language.
Press
when you finish.
* Repeat steps 3 to 8 when you wish to make changes
to other options.
E-32
Adjustment
: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.
Function
: Allows setting of 24-frame mode. (See P. E-34.)
English
• FEATURES setup screen has the following 5 options.
On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-34.)
Input Terminal
: Can make an input terminal setting such as Video Input. (See P. E-35.)
Others
: Can make other settings. (See P. E-36–E-38.)
ADJUSTMENT
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.
Select the item with
Adjustment Item
, and then adjust with
. Finally, press
to implement the adjustments.
Contents of Adjustments
Operation
Dot Clock
(RGB2)
You may find that pictures blur, depending on the
clock frequency of your PC’s processor.
If you experience blurring, you can obtain a clearer
picture by adjusting the “Dot Clock”.
Use
to select the optimal value
at which blurring of pictures is
eliminated.
–60 to +60
Clock Phase
(RGB2)
Pictures may blur as the clock phase of your PC
may be different. In this case, adjust the clock
phase manually. Normally, the automatic setting
ensures the optimal value.
Use
to select the optimal value
at which blurring of pictures is
eliminated.
Auto/Manual
Manual: 1 to 32
Clamp Position
(RGB2, Comp.
video)
Adjusts the clamp position in accordance with the
input signal received from connected equipment.
Normally, the automatic setting ensures the optimal
value.
Use
–8 to +8
Auto Calibration
(RGB2)
Adjusts the dynamic range of images to the
optimum. Performed while a white screen signal is
received.
Display the Auto Calibration screen
and select Execute, and then use
to select the item.
to select the optimal value.
Adjustment Range/Remarks
Execute/Cancel
* On-screen information disappears if you do not take any action for about 60 seconds.
E-33
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
FUNCTION
• Displaying the optimum movie pictures (24 Frame Mode)
for Video
Can make the optimum display of 24 frames/second signals such as movie pictures.
Each time you press or , one of the available choices appears in the following sequence:
Off
On
On : Displays the optimum movie pictures.
Off : Displays normal pictures.
Press
to store.
* Some type of signal can not be selected.
ON SCREEN MENU
• Setting Display Information (OSD)
You can use this option to select whether to display information other than menus. (Error messages
are displayed regardless of what choice you make for this option.)
Each time you press
or
, one of the available choices appears in the following sequence:
On (OSD:bright): On-screen information shown in light color.
On (OSD:dark): On-screen information shown in dark color.
OSD selection screen
Off: Except for menus and error messages, on-screen information is not displayed.
Press
to store.
• Selecting Language (Language)
You can use this option to select the language displayed on the screen.
(1) Select “Language” and press
.
The “Language” selection screen will appear.
(2) Press
or
to select your desired language.
日本語 (Japanese)
English
Deutsch (German)
Español (Spanish)
Français (French)
Italiano (Italian)
Português (Portuguese)
(3) Press
.
The menu is displayed in the selected language.
• Selection of indications
You can change the settings for indications for video inputs and RGB inputs.
Video input
You can change the settings for indications for the VIDEO inputs.
Select the desired indication in accordance with the connected equipment.
Each time
Press
is pressed, the setting is switched. (In the case of VIDEO1)
to store.
RGB input
You can change the settings for indications for the RGB inputs.
Select the desired indication in accordance with the connected equipment.
Each time
Press
E-34
is pressed, the setting is switched. (In the case of RGB 1)
to store.
“Language” selection screen
English
SETTING THE INPUT TERMINALS
• Selecting Video Mode (Video Input)
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.
Each time you press or , one of the available modes appears in the following sequence:
Auto1: Automatically selects NTSC, PAL and SECAM.
Auto2: Automatically selects NTSC and M-PAL.
Other than Auto: You need to select a system appropriate to the input signal.
Press
to store.
• Selecting S-video Mode (S-video Input)
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.
Each time you press or , one of the available modes appears in the following sequence:
Auto1: Automatically selects NTSC, PAL and SECAM.
Auto2: Automatically selects NTSC and M-PAL.
Other than Auto: You need to select a system appropriate to the input signal.
Press
to store.
• Selecting D-SUB Input (D-SUB Input)
You can use this option to select the signal system it will receive to D-SUB Input terminal.
(1) Select D-SUB Input and press
.
D-SUB Input screen appears.
(2) Select the signal system to receive.
Each time you press
RGB-PC
or
, one of the available choices appears in the following sequence:
Decoder
RGB-PC: For using RGB for PC
Decoder: For using digital broadcast tuner
(3) Press
or
to select Mask.
(4) Select Decoder by FUNCTION to set up Mask.
Each time you press
Off:
or
, one of the available choices appears in the following sequence:
Does not mask.
Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels
specified.
(5) Press
“D-SUB Input” selection screen
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
1234567890123456789012345678901
This fringe part is masked.
to store.
• DVI Input
You can select the signal method input to the DVI input terminal.
Each time or is pressed, the setting is changed.
DVI1
DVI2
DVI1: Used when connecting to a PC.
DVI2: Used when connecting to a DVD player or digital tuner.
Press
to store.
* Set according to the signal method before connecting peripheral device.
* On-screen information disappears if you do not take any action for about 60 seconds.
E-35
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
OTHER SETTINGS
DPMS
for other then RGB1
You can use this option to select the amount of time before the DPMS function starts.
DPMS (which stands for “display power management signaling”) allows the display to maintain an
automatic power saving function.
This function causes on-screen information to disappear until the next input operation, if the power
is ON and the display has not received any signals for the predetermined period of time. When
DPMS is active, the power indicator lamp turns orange.
(1) Select DPMS and press
.
DPMS selection screen
DPMS screen appears.
(2) Press
or
to select Time.
(3) Each time you press
Off:
or
, one of the available choices appears in the following sequence:
Disables DPMS
Number: Approximate time before DPMS starts. (Unit: minutes)
* The power indicator lamp turns orange while the DPMS is ON.
* The power turns ON automatically when the display receives a signal.
(4) Can specify background colour.
Press
or
to select background colour.
Each time you press
or
, one of the available choices appears in the following sequence:
White
Black
Black: Mutes images in Black background.
White: Mutes images in White background.
* Switches approx. 20 seconds after the display stops receiving signals.
(5) Press
to store.
• Selecting input terminals (Audio Input)
You can use this option to select one of the three available terminals to receive sound from input
equipment.
(1) Select “Audio Input” and press
.
The “Audio Input” selection screen will appear.
(2) Press
or
to select input equipment.
(3) Select a desired input terminal.
Each time you press
or
, one of the available choices appears in the following sequence:
No audio: No sound in the corresponding mode.
Audio 1-3: Selects Audio 1 through 3 for receiving sound in the corresponding mode.
* Repeat steps (2) and (3) for each piece of input equipment.
(4) Press
to store.
*Audio Input menu will not be displayed when "No Audio"is selected.
E-36
“Audio Input” selection screen
for RGB
English
• Minimizing phosphor burn-in (Screen Orbiter)
You can use this option to move the screen position to minimize phosphor-induced “burn-in”.
Follow the steps below.
(1) Select “Screen Orbiter” and press
.
The “Screen Orbiter” setting screen will appear.
(2) Press
or
to select “Mode/Time”.
(3) Select a desired pattern.
Each time you press
or
, one of the available choices appears in the following sequence:
“Screen Orbiter” setting screen
Off: Disables Screen Orbiter.
Time: Moves the pattern approximately every one hour.
Mode: Moves the pattern when the power is turned ON or when you switch between modes.
(4) Press
(5) Press
or
or
to select “Moving Area”.
to select the range for moving the pattern.
Each time you press
or
, one of the available choices appears in the following sequence:
Min.: Pattern moves in small range. (About 5 pixels)
Std.: Pattern moves in moderate range. (About 10 pixels)
Max.: Pattern moves in wide range. (About 15 pixels)
(6) Press
to store.
* When the Screen Orbiter function is operated in RGB1 mode, some letters at the top, bottom,
right or left of the screen may be missed.
• Setting RGB Input Signal Compulsorily (Direct Setting)
for RGB
You can use this option to switch the setting for RGB input signal.
Each time you press
or
, one of the available choices appears in the
following sequence:
For RGB1 mode:
For RGB2 mode:
Auto:
The optimum display is obtained automatically for input signals.
Others: The optimum resolution setting is fixed for each signal.
Press
to store.
* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may not
be automatically distinguished. Switch to the fixed display when the image is not displayed
properly.
* On-screen information disappears if you do not take any action for about 60 seconds.
E-37
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)
• Specifying RGB Input Signal (Code Setting)
for RGB2
You can use this option to specify and display the type of RGB input signal by code number.
Each time you press
or
, one of the available choices appears in the following
sequence:
Manual
Auto
Auto:
Automatically displays the input signal to the optimum.
Manual: Selects RGB code number.
Press
“Code Setting” setting screen
to store.
* In Auto mode, the optimum resolution may not be set up automatically depending on the type of
signal.
Select the type of signal when the image is not displayed properly.
However, note that when the type of signal is selected directly, the signal of other resolution may
not be displayed properly.
• Displaying white over entire screen (White Screen)
You can use this option to display white over the entire screen to minimize phosphor burn-in.
Each time you press
On
or
, one of the available choices appears in the following sequence:
Off
Off: Does not display white.
On: Displays a white screen immediately.
Press
to store.
• Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by
unspecified persons.
Each time you press
On
or
, one of the available choices appears in the following sequence:
Off
On: Sets up Exhibition mode.
Off: Sets up normal mode.
Press
to store.
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the
adjustment is changed.
* The setup will be cancelled when removing the power plug from the receptacle.
• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press
.
The “Information” screen will appear.
Mode:
Input mode appears at the upper right corner of the screen.
Freq. Scan Mode: Frequency scanning
Input Signal:
Video mode
Input Sync.:
Signal type
Freq.:
Frequency and polarity (fH, fV)
Preset No.:
RGB code number
Information screen (Video Mode)
Information screen (RGB Mode)
* On-screen information disappears if you do not take any action for about 60 seconds.
E-38
INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT)
1
Press
2
Press
English
You can restore the values of the adjustment/setting made in the MENU to factory settings.
.
The main menu screen will appear.
or
to select “FACTORY
DEFAULT”.
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE
POSITION/SIZE
AUDIO
“FACTORY DEFAULT” selected in the
main menu screen
FEATURES
FACTORY DEFAULT
The FACTORY DEFAULT Menu screen will
appear.
3
Press
.
• Displays the message of whether to proceed
with the initialization.
4
Press
Yes.
5
Press
or
to select the
Displays the message of whether to
proceed the initialization
.
• The message of having completed the
initialization will be displayed after initializing.
Press
when you finish.
Displays the message of having
completed the initialization
E-39
OPTIONS
Wall-mounting unit
0° to 15° mounting angle
P-WB4200
Hanging unit
0° to 15° mounting angle
P-CT4200
Stand
P-TT4200
Speaker
P-SP4200 (for 42”)
P-SP5000 (for 50”)
(1 set of 2 speakers)
Speaker Stand
P-ST4200 (for 42”)
P-ST5000 (for 50”)
(1 set of 2 speakers stands)
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.
* The colors of options do not match the display colors perfectly.
Warning
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.
CAUTION: This display (P42VHA10/P42HHA10/P50XHA10/P42VHA20) is for use only with Fujitsu
General Limited’s option (P-WB4200, P-CT4200, P-TT4200).
Using this display with other option can cause instability resulting in possible injury.
E-40
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value
of the first input signal.
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-28–E-29 to adjust the
parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be
displayed in accordance with the settings you most recently selected.
Main corresponding signals (RGB mode)
Display (dots x lines)
Horizontal frequency (kHz)
Vertical frequency (Hz)
Signal
640 x 480
31.47
59.94
VGA
640 x 480
37.50
75.00
VGA 75 Hz
640 x 480
43.27
85.01
VGA 85 Hz
720 x 400
31.47
70.09
400 lines
800 x 600
37.88
60.32
SVGA 60 Hz
800 x 600
46.88
75.00
SVGA 75 Hz
800 x 600
53.67
85.06
SVGA 85 Hz
1024 x 768
48.36
60.00
XGA 60 Hz
1024 x 768
60.02
75.03
XGA 75 Hz
1024 x 768
68.68
84.99
XGA 85 Hz
1280 x 1024
63.98
60.02
SXGA 60 Hz
1280 x 1024
79.98
75.03
SXGA 75 Hz
1600 x 1200
75.00
60.00
UXGA 60 Hz
1600 x 1200
106.25
85.00
UXGA 85 Hz
848 x 480
31.02
60.00
852 x 480
31.72
59.97
1360 x 768
47.71
60.01
720 x 485
15.73
59.94
60 fields
720 x 575
15.63
50.00
50 fields
DVI-D
* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make
sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.
* In the DVI-D mode, the input signal can be restricted partly.
In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:
Main corresponding signals (Comp.video mode)
Horizontal
frequency (kHz)
•
•
•
•
•
Vertical
frequency (Hz)
Signal
Main corresponding signals (Video, S-video mode)
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Signal
15.73
59.94
SDTV 480I
15.73
59.94
NTSC
15.63
50.00
SDTV 576I
15.63
50.00
PAL
31.47
59.94
SDTV 480P
15.63
50.00
SECAM
31.25
50.00
SDTV 576P
15.63
59.52
PAL60
45.00
60.00
HDTV 720P
15.63
50.00
N-PAL
37.50
50.00
HDTV 720P
15.73
59.95
M-PAL
33.75
60.00
HDTV 1080I
15.73
59.94
4.43NTSC
28.13
50.00
HDTV 1080I
Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.
“Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.
You can check input signals through “Information” on the FEATURES Menu screen. (See P. E-38.)
In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
E-41
English
FACTORY SETTINGS
SPECIFICATION
Model
P42VHA10W/P42VHA10A
P42HHA10W/P42HHA10A
Screen size
42" wide screen:
92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal)
36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)
42" wide screen:
92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal)
36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)
Aspect ratio
16:9 (wide)
Weight
28.5 kg / 62.8 lbs
Outer dimensions
103.7 (W) x 64.2 (H) x 8.5 (D) cm
40.8 (W) x 25.3 (H) x 3.3 (D) inch
Power supply
110–240 VAC 50/60 Hz
Current rating
3.1–1.4 A
4.4–1.9 A
Number of pixels
852 (H) x 480 (V)
1024 (H) x 1024 (V)
Display modes
Video, S-video input:
Normal/Auto/Wide1/Wide2/Zoom1/Zoom2
Component video input: Normal/Wide1/Wide2/Zoom1/Zoom2
RGB:
Colors
Normal/Wide/Zoom
16.77 million
External equipment terminals
Video input terminals
VIDEO1 INPUT (Video input)
1 RCA terminal
1 Vp-p/75 Ω
VIDEO2 INPUT (S-video input)
1 S terminal
Y:
C:
1 Vp-p/75 Ω
0.286 Vp-p/75 Ω
VIDEO3/VIDEO4 INPUT
(Component video input)
3 RCA terminals
Y:
PB/CB:
PR/CR:
1 Vp-p/75 Ω
0.7 Vp-p/75 Ω
0.7 Vp-p/75 Ω
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Applicable systems
NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC
PC input terminal
RGB1 input
RGB2 input
Sound terminals
2 sound input pin jacks (L/R) (3 lines)
500 mVrms/at least 22 kΩ
1 RS-232C connector (D-sub 9-pin)
Control terminal
External speaker output terminal
1 DVI-D terminal (EIA/CEA-861 Compliant)
mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level
Effective max. output: 20 W + 20 W (EIAJ), 4 Ω
Operating conditions
Temperature: 0 to 40 °C / 32 to 104 °F
Humidity:
20 to 80 %
Accessories
1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,
2 small ferrite cores
Regulation --- P42VHA10W
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class A, ICES-003 Class A
• CE Safety: EN60065
EMC: EN55022
1998, Class A
EN61000-3-2 1995
EN61000-3-3 1995
EN55024
1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
E-42
Regulation --- P42VHA10A/P42HHA10W/P42HHA10A
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class B, ICES-003 Class B
• CE Safety: EN60065
EMC: EN55022
1998, Class B
EN61000-3-2 1995
EN61000-3-3 1995
EN55024
1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
P50XHA10W/P50XHA10A
P50XHA10U
Screen size
50" wide screen:
110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal)
43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal)
Aspect ratio
16:9 (wide)
Weight
45.0 kg / 99.2 lbs
Outer dimensions
121.4 (W) x 72.8 (H) x 9.8 (D) cm
47.8 (W) x 28.7 (H) x 3.9 (D) inch
Power supply
220–240 VAC 50/60 Hz
120 VAC 50/60 Hz
Current rating
2.7–2.0 A
4.9 A
Number of pixels
1366 (H) x 768 (V)
Display modes
Video, S-video input:
English
Model
Normal/Auto/Wide1/Wide2/Zoom1/Zoom2
Component video input: Normal/Wide1/Wide2/Zoom1/Zoom2
RGB:
Colors
Normal/Wide/Zoom
16.77 million
External equipment terminals
Video input terminals
VIDEO1 INPUT (Video input)
1 RCA terminal
1 Vp-p/75 Ω
VIDEO2 INPUT(S-video input)
1 S terminal
Y:
C:
1 Vp-p/75 Ω
0.286 Vp-p/75 Ω
VIDEO3/VIDEO4 INPUT
(Component video input)
3 RCA terminals
Y:
PB/CB:
PR/CR:
1 Vp-p/75 Ω
0.7 Vp-p/75 Ω
0.7 Vp-p/75 Ω
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Applicable systems
NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC
PC input terminal
RGB1 input
RGB2 input
Sound terminals
2 sound input pin jacks (L/R) (3 lines)
500 mVrms/at least 22 kΩ
1 RS-232C connector (D-sub 9-pin)
Control terminal
External speaker output terminal
1 DVI-D terminal (EIA/CEA-861 Compliant)
mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level
Effective max. output: 12 W + 12 W (EIAJ), 6 Ω
Operating conditions
Temperature: 0 to 40 °C / 32 to 104 °F
Humidity:
20 to 80 %
Accessories
1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,
2 small ferrite cores
Regulation --- P50XHA10W
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class A, ICES-003 Class A
• CE Safety: EN60065
EMC: EN55022
1998, Class A
EN61000-3-2 1995
EN61000-3-3 1995
EN55024
1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
Regulation --- P50XHA10A/P50XHA10U
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class B, ICES-003 Class B
• CE Safety: EN60065
EMC: EN55022
1998, Class B
EN61000-3-2 1995
EN61000-3-3 1995
EN55024
1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
• Specifications and external appearance may be change for the sake of improvement.
•
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
E-43
SPECIFICATION (Continued)
Model
P42VHA20W/P42VHA20A
Screen size
42" wide screen:
92.0 cm (W) x 51.8 cm (H) (106.0 cm diagonal)
36.2 inch (W) x 20.4 inch (H) (41.7 inch diagonal)
Aspect ratio
16:9 (wide)
Weight
29.5 kg / 65.0 lbs
Outer dimensions
103.7 (W) x 64.2 (H) x 8.5 (D) cm
40.8 (W) x 25.3 (H) x 3.3 (D) inch
P42VHA20U
Power supply
220–240 VAC 50/60 Hz
120 VAC 50/60 Hz
Current rating
1.8–1.5 A
4.3 A
Number of pixels
852 (H) x 480 (V)
Display modes
Video, S-video input:
Normal/Auto/Wide1/Wide2/Zoom1/Zoom2
Component video input: Normal/Wide1/Wide2/Zoom1/Zoom2
RGB:
Colors
Normal/Wide/Zoom
16.77 million
External equipment terminals
Video input terminals
VIDEO1 INPUT (Video input)
1 RCA terminal
1 Vp-p/75 Ω
VIDEO2 INPUT(S-video input)
1 S terminal
Y:
C:
1 Vp-p/75 Ω
0.286 Vp-p/75 Ω
VIDEO3/VIDEO4 INPUT
(Component video input)
3 RCA terminals
Y:
PB/CB:
PR/CR:
1 Vp-p/75 Ω
0.7 Vp-p/75 Ω
0.7 Vp-p/75 Ω
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Applicable systems
NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC
PC input terminal
RGB1 input
RGB2 input
Sound terminals
2 sound input pin jacks (L/R) (3 lines)
500 mVrms/at least 22 kΩ
1 RS-232C connector (D-sub 9-pin)
Control terminal
External speaker output terminal
1 DVI-D terminal (EIA/CEA-861 Compliant)
mD-sub, 3 rows, 15-pin
Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level
Effective max. output: 12 W + 12 W (EIAJ), 6 Ω
Operating conditions
Temperature: 0 to 40 °C / 32 to 104 °F
Humidity:
20 to 80 %
Accessories
1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,
2 small ferrite cores
Regulation --- P42VHA20W/P42VHA20A
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class B, ICES-003 Class B
• CE Safety: EN60065
EMC: EN55022
1998, Class B
EN61000-3-2 1995
EN61000-3-3 1995
EN55024
1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
Regulation --- P42VHA20U
• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class B, ICES-003 Class B
• CE Safety: EN60065
EMC: EN55022
1998, Class B
EN61000-3-2 1995
EN61000-3-3 1995
EN55024
1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993
EN61000-4-11 1994
• AS Safety: IEC60065
EMC: AS/NZS 3548
• Specifications and external appearance may be change for the sake of improvement.
•
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
E-44
Precautions
Cleaning the Cabinet and Remote Control
Be sure to remove the power plug from the receptacle before
cleaning the display.
Be sure not to clean the display using a cloth dampened with
volatile solvents, such as benzene or thinner. Such solvents can
harm the display’s cabinet, the filter at the screen front, and the
remote control. They can also cause paint to come off these
sections.
Use a soft cloth for cleaning.
If the cabinet or remote control is heavily stained, soak a soft cloth
in a mixture of water and detergent and squeeze it dry before
wiping off the stains. Use a soft, dry cloth for final cleaning.
Cleaning the Screen
Clean the screen gently with a soft cloth.
The screen surface is fragile. Never attempt to clean it with a hard
material, press on it forcefully, or tap it.
Cleaning the ventilation grille
Remove dust from the ventilation grille in the rear of the main unit
periodically with a vacuum cleaner as the accumulated dust can
increase the internal temperature of the main unit causing machine
failure or fire hazard.
HANDY TIPS
In the event of problems with the display, check the following explanations before contacting your dealer for servicing.
Problem
Action
• Power does not turn ON.
• Check whether the power plug is securely inserted into the receptacle.
• No pictures are displayed.
• Check cables for disconnection.
• Check whether the power for all input equipment is ON.
• Check for connection to wrong terminals or for wrong input mode.
• Check whether the input mode display is colored pink.Special setup may have been
made. Return to original setup or initialize the User adjustment value.
• Remote control does not function properly.
• Check for incorrect battery orientation.
• Check for dead batteries.
• Check for distance from the display.
• Check whether you are pointing the remote control transmitter properly at the display’s
receiver.
• Check for any obstacle between the remote control and the display.
• This sound is produced when the cabinet expands or contracts due to variations in
temperature. This sound does not indicate that the display has a problem.
• The display has fans to maintain the temperature of internal components at a constant
level. This sound is produced by the fan as it rotates.
• Check whether your AV equipment is affected by interference from automobiles, trains,
high-voltage transmission lines, neon signs or other potential sources of interference.
• Check whether all picture adjustments have been properly made.
(See “Adjusting Pictures” on P. E-25–E-27.)
• Check whether screen position and size have been properly adjusted.
(See “Adjusting Screen Position and Size” on P. E-28–E-29.)
• Check cables for disconnection.
• Input proper signals.
Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/
XGA/UXGA, 75 Hz or less for SXGA.
• The display makes a snapping sound.
• The display makes a buzzing sound.
• There are spots on the screen.
• Degraded colors/tints
• Improper screen position/size
• No sound
• If “Out of range” appears or the screen
turns black and white, the display is
receiving a signal whose picture or signal
cannot be reproduced by the display.
• If “Error message Condition 1” appears,
the fan is defective.
• If “Error message Condition 2” appears,
the display’s internal components are
extremely hot.
• Remove the power plug from the receptacle, and contact your dealer for repairs.
• If “Change refresh rate to 60Hz” appears,
• The picture may get blurred with vertical frequency of other than 48.3–51.8 or
58.4–61.4 (Hz). Change the setting of your PC,etc.
• Remove the power plug from the receptacle, and inform your dealer about how the lamp
flashed.
As explained below, the power indicator lamp flashes differently depending on the type
of problem:
– Flashes repeatedly: Improper supply voltage level
– Flashes once: Malfunction by the fan
– Flashes twice: Excessive temperature
– Flashes three times or more: Other problems
• If the power indicator lamp flashes red.
• Remove the power plug from the receptacle. (You can turn the power back ON again
when the components have cooled sufficiently.) If the message appears again when you
turn the power back on, remove the power plug from the receptacle, and contact your
dealer for a repairs.
E-45
English
CLEANING AND MAINTENANCE
Download PDF

advertising