Fujitsu PDS4213W-H Flat Panel Television User Manual

English
USER’S MANUAL
42” WIDE PLASMA DISPLAY
PDS4213W-H/PDS4214W-S
Contents
Page
Before Use
• Safety Precautions ····································· E-2–E-3
• Features ···························································· E-4
• Accessories ······················································ E-5
• Handy Tips ························································ E-6
• Installation ························································· E-7
• Safety Measures ··············································· E-8
Usage
• Part Names and Functions ······················ E-9–E-12
• Using the Remote Control ······························ E-13
• Connecting the Display to External
Equipment ·············································· E-14–E-15
• Basic Operations ············································ E-16
• Selecting Input Mode ······································ E-17
• Watching Images on the Wide Screen ··· E-18–E-19
• How to Use Menus ································ E-20–E-25
Page
Adjustments
• Adjusting Images (PICTURE Menu) ······· E-26–E-27
• Adjusting Screen Position and Size
(POSITION/SIZE Menu) ·························· E-28–E-29
• Adjusting Sound (SOUND Menu) ··········· E-30–E-31
• Other Adjustments (OTHERS Menu) ······ E-32–E-34
• Extended Features (Extended menu) ····· E-35–E-39
Others
• Options ··························································· E-40
• Factory Settings ·············································· E-41
• Specification ·········································· E-42–E-43
• Cleaning and Maintenance ····························· E-44
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety
precautions.
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Consult your product dealer for details.
DECLARATION OF CONFORMITY
according to EN45014
We
Fujitsu General (Euro) GmbH
of
Werftstraße 20, D-40549 Düsseldorf, F. R. Germany
Manufacturer: Shinjyo Fujitsu General Limited
702-3 Kanezawa Shinjyo-shi
Yamagata Japan
declares under our sole responsibility that the product,
Type: 42” PLASMA DISPLAY
Model Name: PDS4213W-H
to which this declaration relates are in conformity with the following standards;
European Standards:
EMC: a. EN55022 1994/A1:1995/A2:1997/A3: 1998 Class A
b. EN61000-3-2 1995
c. EN61000-3-3 1995
d. EN55024 1998
(EN61000-4-2 1995 / EN61000-4-3 1996)
(EN61000-4-4 1995 / EN61000-4-5 1995 / EN61000-4-6 1996)
(EN61000-4-8 1993 / EN61000-4-11 1994)
Safety: e. EN60950 1992/A1:1993/A2:1993/A3:1995/A4:1997
By conformance with the standard referenced, the product follows
the provisions of the directives listed below.
a.
b.
c.
d.
EC
EC
EC
EC
Council
Council
Council
Council
Directive
Directive
Directive
Directive
89/336/EEC of 3rd, May 1989
92/31/EEC of 28th, April 1992
93/68/EEC of 22nd, July 1993
73/23/EEC of 19th, February 1973
Place of Issue: Germany
Date of Issue: Jun. 2000
Signature:
H. Hirosaki, Managing Director
Fujitsu General (Euro) GmbH
Declaration reference:
Fujitsu General (Euro) GmbH
Werftstraße 20, D-40549 Düsseldorf, F. R. Germany
Tel: 0211-50098-0
Fax: 0211-50098-50
DECLARATION OF CONFORMITY
according to EN45014
We
Fujitsu General (Euro) GmbH
of
Werftstraße 20, D-40549 Düsseldorf, F. R. Germany
Manufacturer: Shinjyo Fujitsu General Limited
702-3 Kanezawa Shinjyo-shi
Yamagata Japan
declares under our sole responsibility that the product,
Type: 42” PLASMA DISPLAY
Model Name: PDS4214W-S
to which this declaration relates are in conformity with the following standards;
European Standards:
EMC: a. EN55022 1994/A1:1995/A2:1997/A3: 1998 Class B
b. EN61000-3-2 1995
c. EN61000-3-3 1995
d. EN55024 1998
(EN61000-4-2 1995 / EN 61000-4-3 1996)
(EN61000-4-4 1995 / EN 61000-4-5 1995 / EN61000-4-6 1996)
(EN61000-4-8 1993 / EN 61000-4-11 1994)
Safety: e. EN60950 1992/A1:1993/A2:1993/A3:1995/A4:1997
By conformance with the standard referenced, the product follows
the provisions of the directives listed below.
a.
b.
c.
d.
EC
EC
EC
EC
Council
Council
Council
Council
Directive
Directive
Directive
Directive
89/336/EEC of 3rd, May 1989
92/31/EEC of 28th, April 1992
93/68/EEC of 22nd, July 1993
73/23/EEC of 19th, February 1973
Place of Issue: Germany
Date of Issue: Jun. 2000
Signature:
H. Hirosaki, Managing Director
Fujitsu General (Euro) GmbH
Declaration reference:
Fujitsu General (Euro) GmbH
Werftstraße 20, D-40549 Düsseldorf, F. R. Germany
Tel: 0211-50098-0
Fax: 0211-50098-50
SAFETY PRECAUTIONS
FCC NOTICE
• PDS4213W-H: A Class A digital device
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
• PDS4214W-S: A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
–
Reorient or relocate the receiving antenna.
–
Increase the separation between the equipment and receiver.
–
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT INFORMATION
WARNING: This is Class A and Class B product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards
incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important
Safeguards” carefully before use.
–
All the safety and operating instructions should be read before the product is operated.
–
The safety and operating instructions should be retained for future reference.
–
All warnings on the product and in the operating instructions should be adhered to.
–
All operating instructions should be followed.
–
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
–
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
–
Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this causes
condensation, which may result in fire, electric shock, or other hazards.
–
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious
damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount
recommended by the manufacturer.
E-2
When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces
which may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator.
–
Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and
protect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the
product on bed, sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided and the manufacturer’s instructions have been adhered to.)
English
–
For proper ventilation, separate the product from other equipment, which may prevent ventilation and keep distance more than 10
Power cord
Power supply voltage:
AC 100–125 V
AC 200–240 V
AC 240 V (SAA TYPE)
E-3
FEATURES
This display has a plasma display panel and is only 8.5 cm deep. With its high image quality and performance, it is perfectly suited to
multimedia applications.
Can receive a variety of input signals
• In addition to video, S-video, and RGB1 (mD-sub Connector), RGB2 (BNC x 5 connector) signals, this display supports input of highquality video signals such as DVD and HDTV.
• The display is applicable to the following color television systems used worldwide: NTSC, PAL, SECAM, N-PAL, M-PAL, 4.43NTSC.
• The display has a component video input terminal to receive signals from the DVD player and HDTV equipment as well as digital
broadcasting signals (color difference signals).
• The display has an RGB input terminal to receive signals, including wide RGB signals*1, VGA, SVGA, and XGA*2.
5 screen sizes (video input mode) and 3 screen sizes (RGB input mode)
• This display offers a total of five different screen sizes in video input mode: Wide1, Wide2, Zoom1, and Zoom2. A Normal mode is
also available, for display of normal-size (4:3 aspect ratio) images.
• Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.
Install the display lengthwise
• The display can be installed lengthwise, enabling advertising to be displayed. In this case, you can set up the display so that on-screen
information, such as input modes and menus, is displayed properly.
Power management function
• The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability.
Flexible enough to be used as part of a system
• You can operate the display by remote control using the RS-232C interface.
• If you have two or more displays, you can assign a unique number to each of them so that you can select which one you want to use.
Others
• You can specify the color temperature.
• Two-line sound input, 1 W + 1 W built-in speaker, and 7 W + 7 W external speaker outputs are available.
• The white screen and screen saver functions are available to minimize phosphor burn-in.
*1 With the optionally available graphics board, you can send wide RGB signals (852 x 480) from your PC.
*2 The refresh rate of 60 Hz for XGA (1024 x 768) and those of 50, 60, 72, and 75 Hz for SVGA (800 x 600) are supported.
Note that the XGA and SVGA images will be smaller when displayed on the screen.
E-4
English
ACCESSORIES
CHECKING ACCESSORIES
One connector
cover
One remote
control
Four screws
(screw A x 2,
screw B x 2)
Two ferrite cores
(with wire
clampers)
One strap
(for remote control)
Two AA batteries
One user’s manual
Two cable
clampers
Three power
cables
HOW TO USE ACCESSORIES
Cable clampers
Use the supplied cable clampers to bind the display’s signal or power cables. Use them as shown in the figure when mounting the display
on the wall, using the wall-mounting unit, or hanging it from the ceiling using the hanging unit.
When you run signal cables
downwards
When you run signal cables to the right
Connector cover
When you finish binding the cables using the cable clampers, you need to attach the
connector cover to the display.
To do this, use nippers to cut out a section of the connector cover such that the cables can
be pulled out through that section. Then attach the cover to the display.
When attaching the connector cover, make sure that the upper and lower projections on
the cover fit properly into the corresponding sections on the display.
Projections (to be fit into corresponding
sections on the display)
Information
Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.
E-5
HANDY TIPS
• Images may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a
prolonged service life, be sure to use a screen saver. This will ensure the same image or pattern is not constantly displayed for long
periods. (See P. E-38–E-39.)
• The display’s plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find,
however, that some pixels constantly remain lit or dimmed.
• The display has a fan to prevent its internal temperature from rising.
The fan starts if the surrounding temperature or the internal temperature of the display exceeds a certain level. If the display is installed
improperly or installed in the wrong direction, the resulting internal temperature increase will cause the fan to operate.
• Be careful with the air delivered by the fan. It may be very hot.
• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.
You may need to move your display if it produces degraded images or noise due to electromagnetic radiation, or if the infrared remote
control does not function properly.
• Images may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer
for more information.
• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see
that the power indicator lamp flashes red.
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on P.
E-44, or contact your dealer.
• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet)
from the screen and to look occasionally away it while working.
• Have the display inspected and cleaned by your dealer at regular intervals.
E-6
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.
Be sure to use the (optionally available) stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that
your dealer performs the actual installation.
See the appropriate instruction manual for more information on the installation hardware you select.
To ensure proper heat radiation, provide at least as much space around the display as shown below.
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.
* Never attempt to tilt the display sideways or backward.
* To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.
* The display can be installed with either of its sides facing down.
When using the stand
Front
Side
(cm)
Upper
(cm)
1.5
10
10
10
Left
Wall
Right
6
Floor
Floor
When using the wall-mounting unit (horizontal type)
Front
When using the wall-mounting unit (vertical type)
Side
(cm)
Front
Side
(cm)
Upper
(cm)
Upper
(cm)
Wall mounting unit
10
Wall mounting unit
10
Left
10
10
10
Right
Wall
10
Left
Right
Wall
6
Lower
1.5
10
Lower
1.5
* When you install the display lengthwise (rather than in
its normal position), you need to adjust the display so
that characters will appear properly.
Note
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing
materials originally supplied with the display when repacking it.
Reference
See P. E-40 for more information on options.
E-7
English
INSTALLATION
SAFETY MEASURES
To prevent accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.
FIXING THE DISPLAY TO A WALL OR PILLAR
Safety braket A
You need two strong cords.
1 Attach a bracket to each hole at the rear of the display
Screw A
To do this, use screw A (10 mm long) to attach safety
bracket A, supplied with the display, to the hole at the rear
of the display.
2 Attach two brackets to the wall
To do this, use screws B (20 mm long) to attach safety
brackets B, supplied with the display, to the wall.
* To make sure that the display is stable, attach wall
brackets at the same height as (or slightly lower than) the
display brackets.
3 Tie brackets A and B together
Strong cords (not supplied)
Screw A (10 mm)
To do this, use strong cords to fix the display securely to
the wall.
Screw B (20 mm)
Safety
braket A
Safety
braket B
FIXING THE DISPLAY TO THE STAND
Use two screws, supplied with the stand, to fix the display
using the holes provided at the rear of the stand.
See the instruction manual for the stand (P-42TT11 type) for
more information.
Screw
(supplied with stand)
E-8
Front
1 Power indicator lamp
This lamp shows whether the main power is ON or OFF, as
follows:
Lit (red):
Standby
Lit (green):
Power ON
Lit (orange):
Power saving (DPMS: Power saving
function) mode ON
POWER
Flashing (red): Malfunction (Flashes differently depending
on the type of malfunction. See P. E-44 for
more information.)
1
2 Remote control signal receiver
2
Receives signals from the remote control.
3
3 Main Power Switch Indicator
Indicates the location of the Main Power switch, at the bottom
of the display.
Control Panel
4 Power button [POWER]
POWER
4
MODE
WIDE
MENU
VOLUME
5 6
7
8
ENTER
9
0
Turns the power ON or OFF when the main power switch,
provided at the bottom of the display, is ON.
5 Input mode selector button [MODE]
Switches between image input modes.
6 Wide screen selector button [WIDE]
The control panel opens when you press the lower center of the
display.
If you press the display again, the control panel closes.
Switches the screen over to a desired wide screen.
7 Menu button [MENU]
Displays image and sound adjustment menus.
8 Volume adjustment buttons [VOLUME -/+]
Adjust the volume.
Note: The [ / ] buttons can also be used to scroll through
the options when a menu is displayed.
9 Adjustment buttons [
/
]
The [ / ] buttons can also be used to scroll through options
in a menu, or to change values.
0 Set button [ENTER]
Press this button to finalize the selection of a desired option in
a menu.
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
E-9
English
PART NAMES AND FUNCTIONS
PART NAMES AND FUNCTIONS (Continued)
Bottom
D
23
4
5 67
1
8 90 A
B
C
1 Main power switch
Press this switch when the power is OFF to turn it ON. When you do so, the power indicator lamp will become red, indicating that
you can turn ON or OFF the power to the display using either the remote control or the display’s control panel.
Press this switch when the power is ON to turn it OFF.
2 RS-232C terminal (RS-232C)
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.
When connecting a cable, attach a ferrite core to the cable. (PDS4213W-H only) (See P. E-14.)
* No RS-232C cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your
dealer for more information.
3 RGB2 synchronization switch (SYNC SW2 TTL/ANALOG (75 Ω))
This switch is used to terminate the RGB2 terminal with 75 Ω for receiving horizontal (H) and vertical (V) synchronization signals.
TTL:
Used when sending RGB signals from the PC to the RGB2 terminal
ANALOG (75 Ω): Used when sending analog synchronization signals to the RGB2 terminal
4 RGB2 input terminal (RGB2 INPUT/BNC x 5)
Connect this terminal to the PC’s display (analog RGB) output terminal.
* No RGB cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your dealer
for more information.
5 RGB1 input terminal (RGB1 INPUT/mD-sub)
Connect this terminal to the PC’s display (analog RGB) output terminal.
* No RGB cable is supplied with the display. The type of cable to be used varies depending on the PC model. Contact your dealer
for more information.
6 RGB1 synchronization switch (SYNC SW1 TTL/ANALOG (75 Ω))
This switch is used to terminate pins 13 and 14 of the RGB1 terminal with 75 Ω respectively for receiving horizontal (H) and vertical
(V) synchronization signals.
TTL:
Used when sending RGB signals from the PC to the RGB1 terminal
ANALOG (75 Ω): Used when sending analog synchronization signals to the RGB1 terminal
7 Sound1 input terminal (AUDIO 1 INPUT)
Connect this terminal to the sound output terminal of your VCR, etc.
8 Component video input terminal (COMPONENT VIDEO INPUT)
Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.
When connecting a cable, attach a ferrite core and wire clamper to the cable. (PDS4213W-H only) (See P. E-14.)
9 S-video input terminal (S-VIDEO INPUT)
Connect this terminal to the S-video output terminal of your VCR or video disk player.
E-10
English
0 Video input terminal (VIDEO INPUT)
Connect this terminal to the video output terminal of your VCR or video disk player.
A Sound2 input terminal (AUDIO2 INPUT)
Connect this terminal to the sound output terminal of your VCR, etc.
B External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker. (Use a speaker with 4 to 16 Ω.)
When connecting cables L and R, attach a ferrite core (with wire clamper) to each of the cables. (See P. E-14.)
* See the speaker instruction manual for more information.
C Power input terminal
Connect this terminal to the power cable supplied with the display.
D Built-in speaker
Produces sound received through the sound input terminal.
Description of Input Terminals
RGB1 input terminal (RGB1 INPUT/mD-sub)
Pin No.
Input signal
Pin No.
Input signal
1
Red
9
—
2
Green
10
Ground
3
Blue
11
—
4
—
12
—
5
Ground
13
Horizontal (H) synchronization
6
Ground
14
Vertical (V) synchronization
7
Ground
15
—
8
Ground
Frame
Ground
* Use the RGB1 synchronization switch to switch between TTL and ANALOG
depending on the types of horizontal (H) and vertical (V) synchronization signals
received through pins 13 and 14, respectively.
RS-232C terminal (RS-232C)
Pin No.
Signal
1
DCD (Data Carrier Detect)
2
RD (Received Data)
3
TD (Transmit Data)
4
DTR (Data Terminal ready)
5
GND (Ground)
6
DSR (Data Set Ready)
7
RTS (Request To send)
8
CTS (Clear To Send)
9
RI (Ring Indication)
E-11
PART NAMES AND FUNCTIONS (Continued)
Remote Control
➝ (See P. E-16.)
1 Power ON button [POWER ON]
POWER OF
POWER ON
VIDEO
RGB
F
WIDE
Turns the power ON.
➝ (See P. E-16.)
2 Power OFF button [POWER OFF]
Turns the power OFF.
MENU
3 RGB input mode selector button [RGB]
VOL
➝ (See P. E-17.)
Switches between RGB input modes.
4 Video input mode selector button [VIDEO]
ENTER
Switches between video input modes.
5 Wide screen selector button [WIDE]
SHIFT
1
2
3
4
➝ (See P. E-17.)
➝ (See P. E-18–E-19.)
Switches the screen over to a desired wide screen.
➝ (See P. E-20–E-39.)
6 Menu button [MENU]
Use this button to display a desired menu for adjusting the image and sound.
7 Volume adjustment buttons [VOL +/-]
➝ (See P. E-16.)
Adjust the volume.
Press the + button to increase the volume.
Press the - button to reduce the volume.
8 Adjustment buttons [
/
/
/
]
➝ (See P. E-20–E-39.)
Use these buttons to scroll through options in a menu and change values.
9 Enter button [ENTER]
➝ (See P. E-20–E-39.)
Press this button to finalize the selection of a desired menu or option within a menu.
0 Display selector buttons [SHIFT 1–4]
➝ (See P. E-35–E-39.)
When you use two or more displays, you can use these buttons to control up to four displays
by assigning a unique number to each of the displays.
PUTTING BATTERIES IN THE REMOTE CONTROL
1 To remove the cover, slide it
outwards while pressing it down.
2
Note
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.
Make sure that you use replace the batteries with new ones; also, be sure to use replacement batteries of the same type as the original ones.
E-12
English
USING THE REMOTE CONTROL
PRECAUTIONS
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or
heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.
EFFECTIVE RANGE FOR THE REMOTE CONTROL
Point the remote control at the display’s signal receiver when using it.
Make sure that there are no obstacles between the remote control and the display’s signal receiver.
Upper
20°
20°
Lower
Left
30°
30°
Rignt
5 m (Front)
POWER OFF
POWER ON
VIDEO
RGB
MENU
WIDE
VOL
ENTER
SHIFT
1
2
3
4
Information
The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the
remote control from a different position.
E-13
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
Be sure to turn OFF the power to the display and external equipment before making any connections.
No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC
model. Contact your dealer for more information.
RECEPTACLE
Make sure that the power cable’s grounding wire is grounded.
The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you
will need to have it replaced. Contact your dealer for more information.
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT
Carefully check the terminals for position and type before making any connections.
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals.
Replace the connector cover onto the display when you finish making the connections.
Terminal
Connector
VIDEO INPUT
BNC
S-VIDEO INPUT
S terminal
COMPONENT VIDEO INPUT
BNC x 3
RGB INPUT
mD-sub 15-pin
BNC x 5
AUDIO INPUT
Pin jack
RS-232C
D-sub 9-pin
Ferrite cores and wire clampers (PDS4213W-H only)
These ferrite cores and wire clampers are used to attenuate undesired signals.
Two ferrite cores and two wire clampers
When connecting a cable to component video input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the
terminal as shown below. (PDS4213W-H only)
Ferrite core
Ferrite core
Wire clamper
Wire clamper
Ferrite cores (with wire clampers)
These ferrite cores with wire clampers are used to attenuate undesired signals.
Two ferrite cores (with wire clampers)
When connecting a cable to the external speaker output terminal, attach one of these ferrite cores to the cable near the terminal.
E-14
English
POWER INPUT
To receptacle
AUDIO2
INPUT
To sound
output
terminal
VIDEO
INPUT
AUDIO1
INPUT
S-VIDEO
INPUT
To video To S-video
output
output
terminal
terminal
Connection to AV equipment
RGB1
INPUT
RGB2
INPUT
RS-232C
COMPONENT
VIDEO INPUT
(color difference
input)
To color
difference
output terminal
To sound To display
output (analog RGB)
output
terminal
terminal
To display
(analog RGB)
output
terminal
To RS-232C
output
terminal
Connection to PC
E-15
BASIC OPERATIONS
TURNING ON THE POWER
POWER OF
POWER ON
VIDEO
RGB
F
WIDE
1
Press the main power switch at
the bottom of the display.
When you do so, the main power turns ON and
the power indicator lamp turns red.
MENU
VOL
ENTER
2
Press
control.
on the remote
When you do so, the power indicator lamp turns
green.
SHIFT
1
2
3
4
3
Press
or
to select a
desired input mode.
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
TURNING OFF THE POWER
Press
when the power is ON.
The power indicator lamp turns red.
ADJUSTING THE VOLUME
Press
to increase the volume.
24
Press
to reduce the volume.
Any value between 0 and 40 can be selected.
* “Speaker off” appears if you press or
after you have
selected “No audio” for “Audio input”. (See P. E-35–E39.)
* Note that the volume level remains stored even when you
turn OFF the power.
E-16
When the volume adjustment button is
pressed
English
SELECTING INPUT MODE
VIDEO INPUT MODE
POWER OF
POWER ON
VIDEO
RGB
F
WIDE
1
Press
to select a desired
input mode.
S−video
Each time you press , a different input mode
appears. The sequence is as follows:
MENU
VOL
Video
S-video
Comp.video
Video:
Displays images from equipment
connected to the Video terminal.
S-video:
Displays images from equipment
connected to the S-video terminal.
ENTER
SHIFT
1
S-video mode
Comp.video
Comp.video: Displays images from equipment
connected to the component video
input terminal.
2
3
4
* You can switch between video input modes
while you are in RGB input mode.
Comp.video mode
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
RGB INPUT MODE
POWER OF
POWER ON
VIDEO
RGB
F
WIDE
1
Press
to select a desired
input mode.
Each time you press
appears as follows:
MENU
VOL
ENTER
SHIFT
1
2
3
4
RGB1
RGB1
, a different input mode
RGB2
RGB1: Displays images from equipment
connected to the RGB1 (mD-sub)
terminal.
RGB1 mode
RGB2
RGB2: Displays images from equipment
connected to the RGB2 (BNC x 5)
terminal.
* You can switch between RGB input modes
while you are in a video input mode.
RGB2 mode
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
E-17
WATCHING IMAGES ON THE WIDE SCREEN
SWITCHING BETWEEN SCREEN SIZES
POWER OF
POWER ON
VIDEO
RGB
F
WIDE
1
Press
.
The currently selected mode will appear.
MENU
VOL
ENTER
SHIFT
1
2
3
4
2
Press
to select a desired
image mode.
Each time you press , a different image mode
appears. The sequences used are as follows:
Normal
Normal mode
When you are in a video input mode
Normal
Auto
Zoom2
Zoom1
Wide1
Wide2
When you are in an RGB input mode
Normal
Wide
Zoom
Wide1
Wide1 mode
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
Information
• You cannot select Auto mode when you are in Comp.video mode (video input mode).
• You may not be able to watch images clearly in Auto mode, depending on the contents of the image software you use. If you experience problems,
use
to switch to a mode that provides the optimum screen size.
* With some games, the zoom screen (with upper and lower unviewable areas) may be selected.
* With some images of standard size (i.e., 4 (frame width) x 3 (frame height)), the zoom screen may be selected if the upper and lower sections of
the image in a scene are extremely dark.
* Some images are designed such that the zoom screen is automatically selected as necessary. With some of these images, however, the screen size
may not be immediately switched over to the zoom screen if the first scene contains an extremely dark image.
Note
• A variety of image modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame
height) different from that of the TV program or video media, the images will appear differently than if you had selected a mode having the same
aspect ratio.
• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making
purposes or for a public audience may constitute a copyright infringement.
For films, try to select a mode having the same aspect ratio as the original image; this enables the director’s original intentions to be preserved.
Reference
See P. E-28–E-29 for how to adjust the image size and position.
E-18
English
SCREEN SIZE
Normal
Displays images of normal size (i.e., a 4:3 aspect ratio).
Auto (Video Input Mode)
The screen size changes automatically in accordance with the contents of image software
you use.
* You cannot select this mode if you have selected the Comp.video mode for input mode.
Wide1 (Video Input Mode)
Displays natural-looking images of standard size on the wide screen.
Image of
standard size
Wide1
Vertically
extended image
Wide2
Horizontally
extended image
Zoom1
Horizontally extended
image with caption
Zoom2
Wide2 (Video Input Mode)/Wide (RGB Input Mode)
Reduces the aspect ratio of images from 16:9 to 4:3.
Ideal for displaying vertically extended images such as squeezed images and recorded
HDTV programs.
Zoom1 (Video Input Mode)/Zoom (RGB Input Mode)
Enlarges horizontally extended images equally in all directions to maintain the aspect
ratio constant.
Zoom2 (Video Input Mode)
Reduces the height of horizontally extended images with captions, without eliminating
the caption. Only the height of images is reduced, not the height of the caption.
(Captions may not be easy to read, however, depending on the image.)
ASPECT RATIO
The following aspect ratios are available.
4:3 aspect ratio
(VHF/UHF broadcasting, BS broadcasting)
4
3
1.85
1.85:1 aspect ratio
(Vista Vision size)
1
16:9 aspect ratio
(HDTV broadcasting, EDTV II
(enhanced definition television II))
16
9
2.35
2.35:1 aspect ratio
(Cinema Vision size)
1
Information
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema
Vision size i.e., the sizes used frequently for image software.
E-19
HOW TO USE MENUS
SELECTING OPTIONS IN A MENU
Use the [MODE] button on the display or
1
Press
MENU
and
on the remote control to select a desired input mode.
▲
PICTURE
.
The main menu screen will appear.
2
Press
or
Each time you press
3
Press
ENTER
to switch between subordinate menus.
or
or
, one of the available menus appears.
MENUquit
ENTERnext
Ex.: “PICTURE” selected in the main menu
screen
.
The corresponding menu screen will appear.
A total of four different menus (PICTURE, POSITION/SIZE, SOUND, OTHERS) are available.
You can easily distinguish between these menus as shown below.
PICTURE
POSITION/SIZE
SOUND
* Do not change input signals when any of the menus is displayed.
E-20
OTHERS
English
USING THE PICUTURE MENU
When you finish selecting a desired option in the PICTURE menu screen, press
ENTER
or
.
At this time, the adjustment/setup screen for that option will appear.
You can use
or
to change the value for the option. (See P. E-26–E-27.)
Changes you make will be stored only for the selected mode.
▲
PICTURE
Contrast 0
−−−−−−−−+
Brightness 0
−−−−−−−−+
Color 0
−−−−−−−−+
Tint 0
−−−−−−−−+
Sharpness 0
−−−−−−−−+
Color temp.
Standard
MENUreturn
▲
PICTURE
Contrast 0
−−−−−−−−+
Brightness 0
−−−−−−−−+
Color temp.
Standard
Dot clock 0
−−−−−−−−+
Clock phase. 0
−−−−−−−−+
MENUreturn
ENTERnext
PICTURE Menu screen (Video Input Mode)
PICTURE Menu screen (RGB Input Mode)
Option
Function
Operation
(1) Contrast
Adjusts image contrast.
: Higher contrast
: Lower contrast
-30 to +30
(2) Brightness
Adjusts screen brightness.
: Brighter screen
: Darker screen
-60 to +60
(3) Color
Adjusts color darkness.
: Darker colors
: Lighter colors
-60 to +60
(4) Tint
(for Video, S-video, Comp.video)
Adjusts tint.
: More green-tinged colors
: More purple-tinged colors
-30 to +30 (Video, S-video)
-60 to +60 (Comp.video)
(5) Sharpness
(for Video, S-video, Comp.video)
Adjusts image sharpness.
: Sharper images
: Less sharp images
-30 to +30 (Video, S-video)
-3 to +3 (Comp.video)
(6) Color temp.
Adjusts color temperature.
Use
(7) Dot clock
(for RGB1, RGB2)
Adjusts the dot clock.
Eliminates blur when the
optimum value is selected with
or .
-300 to +300
(8) Clock phase
(for RGB1, RGB2)
Adjusts clock phase.
Eliminates blur when the
optimum value is selected with
or .
0 to 15
or
Range
for switching.
Warm/Standard/Cool
E-21
HOW TO USE MENUS (Continued)
USING THE POSITION/SIZE MENU
When you finish selecting a desired option in the POSITION/SIZE menu screen, press
ENTER
or
.
When you do so, the adjustment screen for that option appears.
You can use
or
,
, and
to change the value for the option. (See P. E-28–E-29.)
Changes you make will be stored only for the selected mode.
▲
POSITION/SIZE
Position
Size
Position
Horizontal
Vertical
MENUreturn
▽△ adjust MENUreturn
ENTERnext
POSITION/SIZE Menu screen
+1
−1
“Position” adjustment screen
Option
Function
(1) Position
Adjusts screen position.
Horizontal
Adjusts horizontal position.
Vertical
Adjusts vertical position.
Operation
: Moves screen to the right.
: Moves screen to the left.
: Moves screen up.
: Moves screen down.
Range
Video, S-video
Horizontal: -30 to +30
Vertical
Zoom: -15 to +15
Others: -7 to +7
Comp.video: -16 to +16
RGB1, RGB2: -250 to + 250
(2) Size
E-22
Adjusts screen size.
Video, S-video: -7 to +7
Width
Adjusts width.
: Increases width.
: Reduces width.
Height
Adjusts height.
: Increases height.
: Reduces height.
Comp.video: -4 to +4
RGB1, RGB2: -150 to +150
English
USING THE SOUND MENU
When you finish selecting a desired option in the SOUND menu screen, use
31.)
or
to change the value for that option. (See P. E-30–E-
Changes you make will be stored only for the selected mode.
▲
SOUND
Treble
0
−−−−−−−−+
0
−−−−−−−−+
Balance
0
−−−−−−−−+
Speaker
Internal
Bass
MENUreturn
adjust
SOUND Menu screen
Option
Function
Operation
(1) Treble
Adjusts treble.
: Stronger treble
: Weaker treble
-6 to +6
(2) Bass
Adjusts bass.
: Stronger bass
: Weaker bass
-6 to +6
(3) Balance
Adjusts volume balance.
:Higher volume from righthand speaker
: Higher volume from lefthand speaker
-10 to +10
(4) Speaker
Selects built-in or external
speakers.
Use
or
Range
for switching.
Internal (built-in speakers)
External (external speakers)
E-23
HOW TO USE MENUS (Continued)
USING THE OTHERS AND EXTENDED MENUS
• Options with “ ” on the right
When you select an option with “ ”, press
You can use
or
ENTER
or
. The adjustment/setup screen for that option appears.
on this screen to make selections or changes.
• Options with no “ ” on the right
When you select an option with no “ ”, press
or
to make selections or changes. (See P. E-32–E-39.)
Changes you make will be stored only for the selected mode.
OTHERS Menu
▲
OTHERS
OSD
Language
Monitor No.
Video mode
AGC
Bluish white
▲
OTHERS
OSD
On
Language
Monitor No.
0
Vertical sync
0
Clamp pulse
0
Status
Extended menu
On
0
Auto
On
Status
Extended menu
On
MENUreturn
select
More detailed
adjustment items
are included in
’Extended menu’.
Extend menu
Enter
Return
MENUreturn
ENTERapply
MENUreturn
select
OTHERS Menu screen (Video Input Mode)
OTHERS Menu screen (RGB Input Mode)
Extended menu message screen
Option
Function
Operation
(1) OSD
Selects whether to display
information other than
menus.
Use
(2) Language
Selects language used for
menus.
Display the “Language”
or
selection screen and use
to select a language.
Press
to display menus
in the selected language.
English
Deutsch (German)
Español (Spanish)
Français (French)
Italiano (Italian)
Português (Portuguese)
or
Range
for switching.
ENTER
On (displayed)
Off (not displayed)
(3) Monitor No.
Selects display number.
Use
or
for switching.
0 (no setup)
1/2/3/4
(4) Video mode
(for Video, S-video)
Selects video mode.
Use
or
for switching.
Auto/NTSC/PAL/SECAM/
N-PAL/M-PAL/4.43NTSC
(5) Vertical sync
(for Comp.video, RGB1, RGB2)
Corrects vertical
synchronization signal.
Use or to select the
optimum value for eliminating
flicker.
-2 to +1
(6) Clamp pulse
(for Comp.video, RGB1, RGB2)
Adjusts clamp pulse.
Use
0 to 8
(7) AGC
(for Video, S-video, Comp.video)
Selects whether to enable
AGC (auto gain control).
Press
status.
(8) Bluish white
(for Video, S-video)
Makes white areas appear
even whiter.
Use
(9) Status
Displays system operation
status.
Displays the “Status”
information screen.
to update the
Press
status.
or
ENTER
or
for switching.
to update the
for switching.
On (auto control)
Off (fixed gain)
On (enabled)
Off (disabled)
Display only
ENTER
(10) Extended menu
E-24
Extended features
(Extended menu)
Displays a message screen.
Enter: Displays Extended menu screen.
Return: Returns to OTHERS Menu screen.
Extended menu
OSD rotate
Normal
DPMS
Off
White screen
Off
Screen saver
Input priority
Off
Audio input
more▽
Extended menu
2/2
△prev.
Studio mode Off
White peak level
calibration
Sharpness 0
Gamma
Still
Gradation
Mode 1
Vertical lines
480 Lines
Freq. scan
Auto
MENUreturn
select
MENUreturn
select
Extended menu
1/2
OSD rotate
Normal
DPMS
Off
White screen
Off
Screen saver
Input priority
Off
Audio input
3D Y/C
On
Studio mode
Off
MENUreturn
select
Extended menu screen (Video Input Mode)
English
Extended menu
Extended menu screen (RGB Input Mode)
Option
Function
Operation
(1) OSD rotate
Rotates on-screen text.
Use
or
for switching.
-90 Deg. (counterclockwise)/
Normal/
+90 Deg. (clockwise)
(2) DPMS
Specifies time before
DPMS starts.
Use
or
for switching.
Off (disabled)
1 min./3 min./5 min./10 min./
30 min.
(3) White screen
Selects whether to display
white over the entire
screen.
Use
or
for switching.
Off (disabled)
Link DPMS/On
(4) Screen saver
Sets up screen saver.
Display the “Screen saver”
or
adjustment screen and use
to select an option.
Use or to switch between
available choices for the
selected option.
Function
Off (disabled)
Time (every 1 hr)
Mode (every time mode is
switched)
Moving area
Narrow (moves in small
range)
Standard (moves in
moderate range)
Wide (moves in wide range)
(5) Input priority
Specifies input mode of
highest priority.
Use
Off/Video/S-video/
Comp.video/RGB1/RGB2
(6) Audio Input
Select sound input
terminals.
Display the “Audio input”
selection screen and use
or
to select an option.
Use or to switch between
available choices for the
selected option.
Audio 1/Audio 2/No audio
(7) 3D Y/C
(for Video (3.58NTSC))
Selects whether to enable
the 3D Y/C circuit.
Use
or
for switching.
On (3D Y/C circuit)
Off (3-line)
(8) Studio mode
Selects color temperature.
Use
or
for switching.
On (for broadcasting stations)
Off (for general users)
(9) White peak level calibration
(for RGB1, RGB2)
Adjusts brightness.
Display the “White peak level
calibration” adjustment screen
or
to select an
and use
option.
(10) Sharpness
(for RGB1, RGB2)
Adjusts sharpness.
(11) Gamma
(for RGB1, RGB2)
Makes gamma correction.
Use
or
for switching.
Motion (motion picture)
Still (still picture)
(12) Gradation
(for RGB1, RGB2)
Makes gradation correction.
Use
or
for switching.
Mode 1 (motion picture)
Mode 2 (still picture)
(13) Vertical lines
(for RGB1, RGB2)
Changes number of vertical
lines.
Use
or
for switching.
350 Lines/400 Lines/
480 Lines
(14) Freq. scan
(for RGB1, RGB2)
Selects whether to enable
auto frequency scanning.
Use
or
for switching.
Auto (scanning)
Fix (fixed)
or
Range
for switching.
: Sharper images
: Less sharp images
Execute (execute)
Original (factory setting)
Cancel (cancel)
-3 to +3
E-25
ADJUSTING IMAGES (PICTURE MENU)
BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]
You can make changes to all image adjustment options in the PICTURE Menu.
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
POWER OF
POWER ON
VIDEO
RGB
F
WIDE
1
Press
MENU
▲
PICTURE
.
The main menu screen will appear.
MENU
VOL
2
Press
or
“PICTURE”.
to select
MENUquit
ENTERnext
Each time you press or , one of the available
menus appears in the following sequence:
ENTER
SHIFT
PICTURE
1
POSITION/SIZE
SOUND
“PICTURE” selected in the main menu
screen
OTHERS
2
3
4
3
Press
ENTER
or
.
The PICTURE Menu screen will appear.
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
4
Press
or
5
Press
ENTER
to select “Tint”.
or
.
The “Tint” adjustment screen will appear.
6
Press
or
values.
▲
PICTURE
Contrast 0
−−−−−−−−+
Brightness 0
−−−−−−−−+
Color 0
−−−−−−−−+
Tint 0
−−−−−−−−+
Sharpness 0
−−−−−−−−+
Color temp.
Standard
MENUreturn
“Tint” selected in the PICTURE Menu screen
(Video Input Mode)
to change tint
: More green-tinged colors
: More purple-tinged colors
Tint
+30
−−−−−−−−+
MENUreturn
adjust
“Tint” adjustment screen
Press M E N U
you finish.
several times when
* Repeat steps 4, 5, and 6 when you wish to make
changes to other options.
E-26
V S C R1 R2
English
Adjusting Contrast (Contrast)
Any value between -30 and +30 can be selected.
: Higher contrast
: Lower contrast
Adjusting Screen Brightness (Brightness)
V S C R1 R2
Any value between -60 and +60 can be selected.
: Brighter screen
: Darker screen
Adjusting Color Darkness (Color)
V S C
Any value between -60 and +60 can be selected.
: Darker colors
: Lighter colors
Adjusting Tint (Tint)
V S C
Any value between -30 and +30 for [ V S ], and -60 and +60 for [ C ] can be selected.
: More green-tinged colors
: More purple-tinged colors
Adjusting Image Sharpness (Sharpness)
V S C
Any value between -30 and +30 for [ V S ], and -3 and +3 for [ C ] can be selected.
: Sharper images
: Less sharp images
Adjusting Color Temperature (Color temp.)
V S C R1 R2
Use or to specify a desired color temperature. Each time you press
the available choices appears in the following sequence:
Warm
Standard
or
, one of
Cool
Warm: More red-tinged colors
Standard: Standard color temperature
Cool: More blue-tinged colors
* You can adjust color temperature once you have selected “Off” for “Studio mode” in
the OTHERS Menu. You cannot adjust color temperature if you have selected “On”
for “Studio mode.” (See P. E-35–E-39.)
Adjusting Dot Clock (Dot clock)
R1 R2
You may find that images blur, depending on the clock frequency of your PC’s processor.
If you experience blurring, you can obtain a clearer image by adjusting the “Dot clock”.
Use
or
to select a value between -300 and +300.
Adjusting Clock Phase (Clock phase)
R1 R2
You may find that images blur, depending on the clock phase of your PC’s processor. If
you experience blurring, you can obtain a clearer image by adjusting the “Clock phase”.
Use
or
to select a value between 0 and 15.
Note
Use
to switch over to the normal mode before adjusting the “Dot clock” or “Clock phase”.
Information
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
V : Video mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode
E-27
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)
BASIC OPERATION [EX.: ADJUSTING SCREEN POSITION]
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.
POWER OF
POWER ON
VIDEO
RGB
F
WIDE
1
Press
MENU
▲
POSITION/SIZE
.
The main menu screen will appear.
MENU
VOL
2
Press
or
to select
“POSITION/SIZE”.
MENUquit
ENTERnext
Each time you press or , one of the available
menus appears in the following sequence:
ENTER
SHIFT
PICTURE
1
POSITION/SIZE
SOUND
“POSITION/SIZE” selected from the main
menu screen
OTHERS
2
3
4
3
Press
ENTER
or
.
The POSITION/SIZE Menu screen will appear.
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
4
Press
or
“Position”.
5
Press
ENTER
to select
or
.
MENUreturn
ENTERnext
The “Position” adjustment screen will appear.
6
▲
POSITION/SIZE
Position
Size
Press
,
, , or
position values.
“Position” selected in the POSITION/SIZE
Menu screen
to change
: Moves screen up.
: Moves screen down.
: Moves screen to the right.
Position
Horizontal
Vertical
MENUreturn
▽△ adjust : Moves screen to the left.
“Position” adjustment screen
Press M E N U
you finish.
several times when
* Repeat steps 4, 5, and 6 when you wish to make
changes to other options.
E-28
+1
−1
Adjusting Screen Position (Position)
English
V S C R1 R2
Horizontal position (Horizontal)
: Moves screen to the right.
: Moves screen to the left.
→
Position
Horizontal
Vertical
MENUreturn
▽△ adjust →
+1
−1
“Position” adjustment screen
Vertical position (Vertical)
: Moves screen up.
→
: Moves screen down.
→
Adjusting Screen Size (Size)
V S C R1 R2
Screen width (Width)
: Increases width.
→
: Reduces width.
Size
Width
Height
MENUreturn
▽△ adjust →
+1
−1
“Size” adjustment screen
Screen height (Height)
: Increases height.
→
: Reduces height.
→
Setting Range
Video, S-video mode
Comp.video mode
RGB1, RGB2 mode
Position
Horizontal: -30 to +30
Vertical
Zoom:
-15 to +15
Others: -7 to +7
-16 to +16
-250 to +250
Size
-7 to +7
-4 to +4
-150 to +150
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
V : Video mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode
E-29
ADJUSTING SOUND (SOUND MENU)
1
Press
MENU
.
The main menu screen will appear.
2
Press
or
to select “SOUND”.
Each time you press or , one of the available
menus appears in the following sequence:
PICTURE
Press
POSITION/SIZE
ENTER
or
SOUND
OTHERS
.
The SOUND Menu screen will appear.
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
Press
or
“Balance”.
to select
Press
or
balance.
to adjust the
: Higher volume from the right-hand speaker
: Higher volume from the left-hand speaker
Press M E N U
you finish.
several times when
* Repeat steps 4 and 5 when you wish to make
changes to other options.
E-30
V S C R1 R2
English
Adjusting Treble (Treble)
▲
SOUND
Treble
Any value between -6 and +6 can be selected.
0
−−−−−−−−+
0
−−−−−−−−+
Balance
0
−−−−−−−−+
Speaker
Internal
Bass
: Stronger treble
: Weaker treble
Adjusting Bass (Bass)
MENUreturn
adjust
V S C R1 R2
Any value between -6 and +6 can be selected.
SOUND Menu screen
: Stronger bass
: Weaker bass
Adjusting Volume Balance (Balance)
V S C R1 R2
Any value between -10 and +10 can be selected.
: Higher volume from the right-hand speaker
: Higher volume from the left-hand speaker
Selecting Speakers (Speaker)
Use
or
to select speakers.
Each time you press
sequence:
Internal
V S C R1 R2
or
, one of the available choices appears in the following
External
Internal: Internal speakers
External: External speakers (not supplied)
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
V : Video mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode
E-31
OTHER ADJUSTMENTS (OTHERS MENU)
BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]
You can make the following changes in the OTHERS Menu.
Note that changes you make to on-screen information (OSD), language (Language), and monitor number (Monitor No.) will be shared in
all input modes.
The changes you make to other options in this menu will be stored for the selected input mode. Therefore, you need to select a desired
input mode before making any changes.
POWER OF
POWER ON
VIDEO
RGB
F
WIDE
1
Press
MENU
.
OTHERS
▲
The main menu screen will appear.
MENU
VOL
2
Press
or
to select “OTHERS”.
Each time you press or , one of the available
menus appears in the following sequence:
ENTER
SHIFT
PICTURE
1
POSITION/SIZE
SOUND
MENUquit
ENTERnext
“OTHERS ” selected in the main menu
screen
OTHERS
2
3
4
3
Press
ENTER
or
.
The OTHERS Menu screen will appear.
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
4
5
Press
or
“Language”.
to select
▲
OTHERS
OSD
Language
Monitor No.
Video mode
AGC
Bluish white
Press
ENTER
or
On
0
Auto
On
Status
Extended menu
.
MENUreturn
ENTERnext
The “Language” selection screen will appear.
• When “ ” appears to the right of an option, you
can display the adjustment screen for that option
by selecting the option and pressing
or
. You can then make changes or selections on
that adjustment screen.
“Language” selected in the OTHERS Menu
screen (Video Input Mode)
ENTER
6
Press
or
language.
7
Press
ENTER
to select the
Language
English
Deutsch
Espa ñ ol
Fran ç ais
Italiano
Portugu ê s
.
MENUreturn
ENTERapply
The menu is displayed in the selected language.
Press E N T E R
you finish.
several times when
* Repeat steps 4 and 5 when you wish to make
changes to other options.
E-32
On
“Language” selection screen
All modes
English
Setting Display Information (OSD)
You can use this option to select whether to display information other than menus.
(Error messages are displayed regardless of what choice you make for this option.)
Each time you press
sequence:
On
or
, one of the available choices appears in the following
Off
On: Displays all information.
Off: Displays only menus and error messages.
Selecting Language (Language)
All modes
Language
English
Deutsch
Espa ñ ol
Fran ç ais
Italiano
Portugu ê s
You can use this option to select the language displayed on the screen.
(1) Select “Language” and press
ENTER
or
.
The “Language” selection screen will appear.
(2) Press
or
to select your desired language.
English
Deutsch
Español
Français
Italiano
Português
(3) Press
MENUreturn
ENTERapply
(German)
(Spanish)
(French)
(Italian)
(Portuguese)
“Language” selection screen
.
ENTER
The menu is displayed in the selected language.
(4) Press
when you finish to return to the OTHERS Menu screen.
MENU
Assigning Numbers to Displays (Monitor No.)
All modes
When you use two or more displays, you can use a single remote control to control
individual displays by assigning a unique number to each of the displays.
Each time you press
sequence:
0
1
or
2
, one of the available numbers appears in the following
3
4
0:
You can normally control displays.
You cannot control displays if you press any of [SHIFT 1] through [SHIFT 4].
1– 4: Allows you to control a desired display by pressing the corresponding button
(one of [SHIFT 1] through [SHIFT 4]).
When you do not press any of the SHIFT buttons, you can control all displays.
* You can check the “Monitor No.” on the Status screen. (See P. E-34.)
Selecting Video Mode (Video mode)
V
S
You can use this option to select the desired video mode of images it will receive.
Each time you press
Auto
or
NTSC
, one of the available modes appears in the following sequence:
PAL
SECAM
N-PAL
M-PAL
4.43NTSC
Auto: Automatically selects the video system.
Other than Auto: You need to select a system appropriate to the input signal.
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
V : Video mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode
E-33
OTHER ADJUSTMENTS (OTHERS MENU) (Continued)
Eliminating Flicker (Vertical sync)
C R1 R2
Corrects the vertical synchronization signal timing to eliminate vertical flicker.
or
Use
to specify a value between -2 and +1.
Adjusting Clamp Pulse (Clamp pulse)
C R1 R2
Adjusts clamp pulse in accordance with the input signal received from connected
equipment.
Clamp pulse is automatically set at the optimal level when you do not use this option.
Use
or
to specify a value between 0 and 8.
Enabling AGC (AGC)
V
S C
Determines whether to employ AGC.
Each time you press
sequence:
On
or
, one of the available choices appears in the following
Off
On: Automatically adjusts the gain to the optimal level.
Off: Maintains the gain constant.
Making White Areas Appear Even Whiter (Bluish white)
V
S
Makes on-screen white areas appear even whiter.
Each time you press
sequence:
On
or
, one of the available choices appears in the following
Off
On: Enables this function.
Off: Disables this function.
Displaying System Status (Status)
V S C R1 R2
Video
Status
Monitor No. 0
Speaker
Internal
Video mode
NTSC
Input signal
525I/60Hz
Displays system operation status.
(1) Select “Status” and press
ENTER
or
.
The “Status” information screen will appear.
(2) Check the status. Press
(3) Press
MENU
ENTER
when you wish to update the status.
MENUreturn
ENTERrenew
to return to the OTHERS Menu screen.
Mode: Input mode appears at the upper right corner of the screen.
“Status” information screen (Video Input
Mode)
Monitor No.: Monitor number
Video mode: Video mode ( V , S only)
Status
Monitor No. 0
Speaker
Internal
Freq. scan
Auto
Input signal
Separate
Frequency
fH 31.7kHz/−
fV 50.0 Hz/−
Preset No.
255
Input signal: Signal type
MENUreturn
ENTERrenew
Frequency: Frequency and polarity (fH, fV) ( C , R1 , R2 )
Speaker: Speaker type
Freq. scan: Frequency scanning ( R1 , R2 )
Preset No.: RGB parameter number ( R1 , R2 only)
“Status” information screen (RGB Input
Mode)
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
V : Video mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode
E-34
RGB1
BASIC OPERATION [EX.: SETTING UP POWER SAVING FUNCTION (DPMS)]
You can use this menu to make adjustments for all extended features.
You can use the “Extended menu”screen to make detailed adjustments.
POWER OF
POWER ON
VIDEO
RGB
MENU
F
WIDE
VOL
1
2
Use
or
on the OTHERS
Menu screen to select “Extended
menu”.
AGC
Bkuish white
Press
ENTER
or
3
2
0
Auto
On
On
MENUreturn
ENTERnext
The message screen will appear.
1
On
Status
Extended menu
.
“Extended menu” selected in the OTHERS
Menu screen (Video Input Mode)
ENTER
SHIFT
▲
OTHERS
OSD
Language
Monitor No.
Video mode
Press
or
to select “Enter”
and press E N T E R .
The “Extended menu” screen will appear.
More detailed
adjustment items
are included in
’Extended menu’.
3
Extend menu
Enter
Return
4
MENUreturn
ENTERapply
Message screen
* You can also use the
switches on the display’s
control panel to accomplish
these steps.
4
Press
or
to select “DPMS”.
• When “ ” appears to the right of an option, you
can display the adjustment screen for that option
by selecting the option and pressing
or
. You can then make changes or selections
on that adjustment screen.
Extended menu
OSD rotate
Normal
DPMS
Off
White screen
Off
Screen saver
Input priority
Off
Audio input
3D Y/C
On
Studio mode
Off
ENTER
5
Press
or
to set up the DPMS.
Each time you press or , one of the available
choices appears in the following sequence:
Off
1 min.
3 min.
5 min.
10 min.
30 min.
MENUreturn
select
“DPMS” selected in the Extended menu
screen (Video Input Mode)
Extended menu
OSD rotate
Normal
DPMS
5 min.
White screen
Off
Screen saver
Input priority
Off
Audio input
3D Y/C
On
Studio mode
Off
MENUreturn
select
DPMS setting screen (Video Input Mode)
Press M E N U
you finish.
several times when
* Repeat steps 4 and 5 when you wish to make
changes to other options.
Information
DPMS (which stands for “display power management signaling”) allows the display to maintain an automatic power saving function. This function
causes on-screen information to disappear until the next input operation, if the power is ON and the display has not received any signals for the
predetermined period of time. When DPMS is active, the power indicator lamp turns orange.
E-35
English
EXTENDED FEATURES (Extended menu)
EXTENDED FEATURES (Extended menu) (Continued)
The following classifies options in the extended menu by application or purpose:
Extended menu
OSD rotate
Normal
DPMS
Off
White screen
Off
Screen saver
Input priority
Off
Audio input
more▽
Extended menu
2/2
△prev.
Studio mode Off
White peak level
calibration
Sharpness 0
Gamma
Still
Gradation
Mode 1
Vertical lines
480 Lines
Freq. scan
Auto
MENUreturn
select
MENUreturn
select
Extended menu
1/2
OSD rotate
Normal
DPMS
Off
White screen
Off
Screen saver
Input priority
Off
Audio input
3D Y/C
On
Studio mode
Off
MENUreturn
select
Extended menu screen (Video Input Mode)
Extended menu screen (RGB Input Mode)
ADJUSTMENTS RELATED TO YOUR PC
When images are brighter (darker) with a new PC
• Adjusting brightness (White peak level calibration)
R1 R2
Select the optimum dynamic range for images.
White peak level
calibration
To do this, you need to create a totally white screen [input 255 to each of R, G, and B] using the
PC’s paint program. Then, display that screen and perform a white peak level calibration. Follow
the steps below.
1 Select “White peak level calibration” and press
ENTER
or
.
The “White peak level calibration” adjustment screen will appear.
2 Press
or
MENUreturn
ENTERapply
to select one of the following:
“White peak level calibration” adjustment
screen
Execute: Performs white peak level calibration.
Original: Restores factory settings.
Cancel: Cancels calibration and maintains current setting.
3 Press
ENTER
4 Press
MENU
.
to return to the “Extended menu” screen.
When improving image quality (from PC)
• Adjusting image sharpness (Sharpness)
R1 R2
Any value between -3 and +3 can be selected.
: Sharper images
: Less sharp images
• Making gamma correction (Gamma)
R1 R2
You can use this option to make a dynamic gamma correction suitable for still or motion pictures.
Each time you press
Motion
or
, one of the available choices appears in the following sequence:
Still
Motion: Suitable for watching a motion picture.
Still: Suitable for watching a still picture.
• Correcting gradation (Gradation)
R1 R2
You can use this option to make gradation corrections suitable for still or motion pictures.
Each time you press
Mode 1
or
, one of the available choices appears in the following sequence:
Mode 2
Mode 1: Suitable for watching motion pictures.
Mode 2: Suitable for watching still pictures.
• Changing the number of lines displayed (Vertical lines)
R1 R2
This display automatically selects vertical lines in accordance with the input signals received. Each
time you press or , one of the available vertical lines appears in the following sequence:
350 Lines
E-36
Execute
Original
Cancel
400 Lines
480 Lines
• Frequency scanning (Freq. scan)
English
R1 R2
You can use this option to perform automatic frequency scanning to ensure optimum image quality.
Each time you press
Auto
or
, one of the available choices appears in the following sequence:
Fix
Auto: Performs automatic frequency scanning at all times for optimum image quality.
Fix: Maintains the current frequency constant.
SCREEN PROTECTION AND POWER SAVING
The screen protection functions minimize phosphor burn-in but cannot completely eliminate it.
• Selecting time before DPMS starts (DPMS)
All modes
You can use this option to select the amount of time before the DPMS function starts.
DPMS (which stands for “display power management signaling”) allows the display to maintain an
automatic power saving function.
This function causes on-screen information to disappear until the next input operation, if the power
is ON and the display has not received any signals for the predetermined period of time. When
DPMS is active, the power indicator lamp turns orange.
Each time you press
Off
1 min.
or
, one of the available choices appears in the following sequence:
3 min.
5 min.
E-37
EXTENDED FEATURES (Extended menu) (Continued)
• Minimizing phosphor burn-in (Screen saver)
All modes
Screen saver
You can use this option to move the screen position to minimize phosphor-induced “burning”.
Function
Off
Moving area
Standard
Follow the steps below.
1 Select “Screen saver” and press
ENTER
or
.
The “Screen saver” setting screen will appear.
2 Press
or
to select “Function”.
MENUreturn
select
3 Select a desired pattern.
Each time you press
Off
Time
or
“Screen saver” setting screen
, one of the available choices appears in the following sequence:
Mode
Off: Disables screen saver.
Time: Moves the pattern every one hour.
Mode: Moves the pattern when the power is turned ON or when you switch between modes.
4 Press
5 Press
or
or
to select “Moving area”.
to select the range for moving the pattern.
Each time you press
Narrow
or
Standard
, one of the available choices appears in the following sequence:
Wide
Narrow: Pattern moves in small range.
Standard: Pattern moves in moderate range.
Wide: Pattern moves in wide range.
6 Press
MENU
when you finish to return to the “Extended menu” screen.
Using screen protection functions (examples)
When using the display occasionally
When using the display continuously
1 Select “Link DPMS” for “White screen”.
2 Select a desired amount of time for “DPMS”.
Thus, when the display does not receive a signal, it will automatically
display white over the entire screen. When the predetermined time
elapses, the power will turn OFF.
When switching between RGB and video input modes only
occasionally
1 Select “Time” for “Function” with “Screen saver”.
2 Select a desired range for “Moving area” with “Screen saver”.
This causes the screen saver pattern to move in the same range at
regular intervals.
When switching between RGB and video input modes
frequently
1 Select “Mode” for “Function” with “Screen saver”.
2 Select a desired range for “Moving area” with “Screen saver”.
This causes the information displayed to move when you switch
between modes.
OTHERS
When displaying images for shooting in studio
• Adjusting color temperature for reshooting (for broadcasting stations)
V S C R1
(Studio mode)
R2
You can use this option to reduce the color temperature to a level suitable for studio use.
Each time you press
On
or
, one of the available choices appears in the following sequence:
Off
On: Adjusts color temperature so that it is appropriate for reshooting.
Off: Specifies the normal color temperature.
When you select “On” for this option, the choice made for “Color temp.” (color temperature) in the
PICTURE Menu will be ignored.
* See P. E-26–E-27 for information on how to specify color temperature.
E-38
• Rotating text (OSD rotate)
English
When rotating text (for installing the display with one of its sides
facing down)
All modes
You can use this option to rotate the text.
Each time you press
-90 Deg.
or
, one of the available choices appears in the following sequence:
+90 Deg.
Normal
-90 Deg.: Displays text from left to right when the display is installed with the power indicator
lamp at the top.
Normal: Displays text normally.
+90 Deg.: Displays text from left to right when the display is installed with the power indicator
lamp at the bottom.
When selecting automatic switching to desired mode
• Input mode of priority (Input priority)
All modes
You can use this option to switch between modes only when a signal is received through the
selected input mode terminal. You cannot switch the input mode.
Each time you press
Off
or
Video
, one of the available choices appears in the following sequence:
S-video
Comp.video
RGB1
RGB2
Off: Switches between modes normally.
Other modes: Displays images when a signal is received through the selected input mode
terminal.
* You cannot switch between RGB1 and RGB2.
You cannot select the currently selected mode.
You cannot switch between input modes when you have selected a mode with this option.
When changing sound input
• Selecting input terminals (Audio input)
All modes
Audio input
RGB1
Audio 1
RGB2
Audio 1
Video
Audio 2
S−video
Audio 2
Comp. video
Audio 2
You can use this option to select one of the two available terminals to receive sound from input
equipment.
1 Select “Audio input” and press
ENTER
or .
The “Audio input” selection screen will appear.
2 Press
or
to select input equipment.
3 Select a desired input terminal.
Each time you press
or
Audio 2
Audio 1
MENUreturn
select
, one of the available choices appears in the following sequence:
“Audio input” selection screen
No audio
Audio 1, Audio 2: Selects Audio 1 or 2 for receiving sound in the corresponding mode.
No audio: No sound in the corresponding mode.
* Repeat steps 2 and 3 for each piece of input equipment.
4 Press
MENU
when you finish to return to the Extended menu screen.
• Enabling 3D Y/C Circuit (3D Y/C)
V
Selects whether to use the 3D Y/C circuit.
Each time you press
On
or
, one of the available choices appears in the following sequence:
Off
On: Enables the 3D Y/C circuit.
You can make this selection only for 3.58NTSC signal.
Off: Enables 3-line.
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
V : Video mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode
E-39
OPTIONS
Wall-mounting unit
Vertical: 0° to 5° mounting angle
(for both vertical and horizontal)
Horizontal: 0° to 15° mounting angle
Hanging unit
0° to 15° mounting angle (variable)
P-42WB11
P-42CT11
The pipe is not supplied with the ceilinghanging unit, so consult your produce dealer.
Stand
P-42TT11
Speaker
P-42SP11
(1 set of 2 speakers)
Speaker stand
P-42ST11
(1 set of 2 speakers
stands)
Graphics board
(You can display a wide screen (i.e., 852 dots
x 480 lines) when you use a graphics board
with your IBM PC or a compatible unit.)
P-42GA04
* When installing an option, make sure that all installation requirements for that option—as given in the relevant instruction manual—are
met.
* The colors of options do not match the display colors perfectly.
Warning
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.
E-40
This display can store parameter settings for eight additional signals for both RGB1 and RGB2.
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-28–E-29 to adjust the
parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, images will be
displayed in accordance with the settings you most recently selected.
This display has been factory-set for 18 different signals as shown below.
Factory-set signals (RGB1, RGB2 modes)
Display (dots x lines)
Horizontal frequency (kHz)
Vertical frequency (Hz)
Signal
852 x 480
31.72
59.97
When a dedicated graphics card is used
640 x 480
31.47
59.94
VGA
640 x 480
37.86
72.81
VGA 72 Hz
640 x 480
37.50
75.00
VGA 75 Hz
640 x 480
43.27
85.01
VGA 85 Hz
720 x 400
31.47
70.09
VGA 400 lines
640 x 400
37.86
85.08
VGA 400 lines
800 x 600
35.16
56.25
SVGA 56 Hz
640 x 400
37.88
60.32
SVGA 60 Hz
800 x 600
48.08
72.19
SVGA 72 Hz
800 x 600
48.88
75.00
SVGA 75 Hz
1024 x 768
48.36
60.00
XGA 60 Hz
640 x 480
35.00
66.67
MAC 13RGB
848 x 480
31.02
60.00
640 x 480
15.73
59.94
60 fields
640 x 480
15.63
50.00
50 fields
640 x 400
24.82
56.42
NEC 24 kHz
31.50
70.15
NEC 31 kHz
15.63 to 80.00*
50.00 to 120.00*
User setting
640 x 400
* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make
sure that the vertical frequency of the input signal is 75 Hz or less for SVGA and 60 Hz for XGA.
In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:
Factory-set signals (Comp.video mode)
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Factory-set signals (Video, S-video mode)
Signal
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Signal
15.73
59.94
SDTV 525i
15.73
59.94
NTSC
15.63
50.00
SDTV 625i
15.63
50.00
PAL
31.47
59.94
SDTV 480p
15.63
50.00
SECAM
45.00
60.00
HDTV 720p
15.73
59.97
4.43NTSC
44.96
59.94
HDTV 720p
15.73
59.97
M-PAL
33.75
60.00
HDTV 1080i
15.63
50.00
N-PAL
33.72
59.94
HDTV 1080i
• The dedicated graphics card is optionally available.
• With the 800 x 600 and 1024 x 768 modes, images of reduced size are displayed on the screen, using size reduction and interpolation. Note also
that on-screen information is also displayed in reduced size.
• “Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.
• You can check input signals through “Status” on the OTHERS Menu screen. (See P. E-32–E-34.)
• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
E-41
English
FACTORY SETTINGS
SPECIFICATION
Model
PDS4213W-H/PDS4214W-S
Screen size
42" wide screen (92.0 cm (W) x 51.8 cm (H) x 105.6 cm (Diagonal))
Aspect ratio
16:9 (wide)
Weight
31.5 kg
Outer dimensions
103.5 (W) x 64.0 (H) x 8.5 (D) cm
Power supply
100–240 VAC 50/60 Hz
Power consumption
3.9 A
Screen dimensions
92.0 (W) x 51.8 (H) cm
Number of pixels
852 (H) x 480 (V)
Display modes
Video, S-video input:
(800 VA: Power ON, instantaneous power when outputting image)
Normal/Auto/Wide1/Wide2/Zoom1/Zoom2
Component video input: Normal /Wide1/Wide2/Zoom1/Zoom2
RGB input:
Normal/Wide/Zoom
Colors
16.77 million (for each of 256 RGB gradations)
Sound output
1 W + 1 W (EIAJ)
Speakers
2 built-in speakers
External equipment terminals
Video input terminals
Video image input
1 BNC terminal
1 Vp-p/75 Ω
S-video image input
1 S terminal
Y:
C:
Component video input (color difference input)
3 BNC terminals
Y:
1 Vp-p/75 Ω
Pb/B-Y: 0.7 Vp-p/75 Ω
Pr/R-Y: 0.7 Vp-p/75 Ω
1 Vp-p/75 Ω
0.3 Vp-p/75 Ω
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Applicable systems
NTSC/PAL/SECAM/N-PAL/M-PAL/4.43NTSC
PC input terminal
RGB1 input terminal
mD-sub, 3 rows, 15-pin
Image signal: 0.7 Vp-p/75 Ω
Synchronization signal: TTL level or 0.3 Vp-p/75 Ω
RGB2 input terminal
BNC terminal x 5
R: 0.7 Vp-p/75 Ω
G: 0.7 Vp-p/75 Ω
B: 0.7 Vp-p/75 Ω
H: TTL level or 0.3 Vp-p/75 Ω
V: TTL level or 0.3 Vp-p/75 Ω
Sound terminals
2 sound input pin jacks (L/R) (2 lines)
500 mVrms/at least 22 kΩ
Control terminal
1 RS-232C connector (D-sub 9-pin)
External speaker output terminal
Lever terminal, 1 line (L/R)
Effective max. output: 7 W + 7 W (EIAJ), 8 Ω
Operating conditions
Temperature: 0 to 40°C
Humidity:
20 to 90%
Accessories
1 connector cover, 1 remote control, 1 strap (for remote control), 2 AA batteries,
1 instruction manual, 2 safety brackets of each type (2 types), 2 screws of each type (2 types),
2 ferrite cores (with wire clampers), 2 ferrite cores (PDS4213W-H only),
2 wire clampers (PDS4213W-H only), 2 cable clampers, 3 power cables
• Specifications and external appearance may be change for the sake of improvement.
•
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.
E-42
English
Regulation ··· PDS4213W-H
• UL, CSA ····· Safety:
EMC:
• CE ··············· Safety:
EMC:
UL1950/CSA C22.2 No.950
FCC Part 15 Class A, ICES-003 Class A
EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997
EN55022
1994, Class A
EN61000-3-2
1995
EN61000-3-3
1995
EN55024
1998
EN61000-4-2
1995
EN61000-4-3
1996
EN61000-4-4
1995
EN61000-4-5
1995
EN61000-4-6
1996
EN61000-4-8
1993
EN61000-4-11
1994
• AS ··············· Safety: IEC950 A1/A2/A3/A4
EMC: AS/NZS 3548
Regulation ··· PDS4214W-S
• UL, CSA ····· Safety:
EMC:
• CE ··············· Safety:
EMC:
UL1950/CSA C22.2 No.950
FCC Part 15 Class B, ICES-003 Class B
EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997
EN55022
1994, Class B
EN61000-3-2
1995
EN61000-3-3
1995
EN55024
1998
EN61000-4-2
1995
EN61000-4-3
1996
EN61000-4-4
1995
EN61000-4-5
1995
EN61000-4-6
1996
EN61000-4-8
1993
EN61000-4-11
1994
• AS ··············· Safety: IEC950 A1/A2/A3/A4
EMC: AS/NZS 3548
E-43
CLEANING AND MAINTENANCE
Precautions
Cleaning the Cabinet and Remote Control
Be sure to remove the power plug from the receptacle before
cleaning the display.
Use a soft cloth for cleaning.
Be sure not to clean the display using a cloth dampened with
volatile solvents, such as benzene or thinner. Such solvents can
harm the display’s cabinet, the filter at the screen front, and the
remote control. They can also cause paint to come off these
sections.
If the cabinet or remote control is heavily stained, soak a soft cloth
in a mixture of water and detergent and squeeze it dry before
wiping off the stains. Use a soft, dry cloth for final cleaning.
Cleaning the Screen
Clean the screen gently with a soft cloth.
The screen surface is fragile. Never attempt to clean it with a hard
material, press on it forcefully, or tap it.
HANDY TIPS
In the event of problems with the display, check the following explanations before contacting your dealer for servicing.
Problem
Action
• Power does not turn ON.
• Check whether the power plug is securely inserted into the receptacle.
• No images are displayed.
• Check cables for disconnection.
• Check whether the power for all input equipment is ON.
• Check for connection to wrong terminals or for wrong input mode.
• Remote control does not function properly.
• Check for incorrect battery orientation.
• Check for dead batteries.
• Check for distance from the display.
• Check whether you are pointing the remote control transmitter properly at the display’s
receiver.
• Check for any obstacle between the remote control and the display.
• The display makes a snapping sound.
• This sound is produced when the cabinet expands or contracts due to variations in
temperature. This sound does not indicate that the display has a problem.
• The display makes a buzzing sound.
• The display has a fan to maintain the temperature of internal components at a constant
level. This sound is produced by the fan as it rotates.
• There are spots on the screen.
• Check whether your AV equipment is affected by interference from automobiles, trains,
high-voltage transmission lines, neon signs or other potential sources of interference.
• Degraded colors/tints
• Check whether all image adjustments have been properly made.
(See “Adjusting Images” on P. E-26–E-27.)
• Improper screen position/size
• Check whether screen position and size have been properly adjusted.
(See “Adjusting Screen Position and Size” on P. E-30–E-31.)
• No sound from the built-in speakers
• Check whether you have set the display for use of internal speakers.
(See “Adjusting Sound” on P. E-28–E-29.)
• No sound from external speakers
• Check cables for disconnection.
• Check whether you have set the display for use of external speakers.
(See “Adjusting Sound” on P. E-28–E-29.)
• No sound
• Check whether you have selected “No audio” for the “Audio input” setting.
(See “Extended Features” on P. E-35–E-39.)
• If “Invalid operation” appears.
• Check whether you have selected “Input priority”.
(See “Extended Features” on P. E-35–E-39.)
• If “Out of range” appears, the display is
receiving a signal whose image or signal
cannot be reproduced by the display.
• Input proper signals.
Make sure that the vertical frequency of the input signal is 75 Hz or less for SVGA and
60 Hz for XGA.
• If “Error message Condition 1” appears,
the fan is defective.
• Turn OFF the main power switch, remove the power plug from the receptacle, and
contact your dealer for repairs.
• If “Error message Condition 2” appears,
the display’s internal components are
extremely hot.
• Turn OFF the main power immediately. (You can turn the power back ON again when
the components have cooled sufficiently.) If the message appears again when you turn
the power back on, turn off the main power switch, remove the power plug from the
receptacle, and contact your dealer for a repairs.
• If the power indicator lamp flashes red.
• Turn OFF the main power switch, remove the power plug from the receptacle, and
inform your dealer about how the lamp flashed.
As explained below, the power indicator lamp flashes differently depending on the type
of problem:
– Flashes repeatedly: Improper supply voltage level
– Flashes once: Malfunction by the fan
– Flashes twice: Excessive temperature
– Flashes three times or more: Other problems
E-44