System information | Fujitsu Siemens Computers B6230 Laptop User Manual

Fujitsu LifeBook
B Series
BIOS Guide
LifeBook B Series Model:
B6230
Document Date: 02/05/2008
Document Part Number: FPC58-1827-01
F U J I T S U C O M P U T E R S Y S T E M S C O R P O R AT I O N
LifeBook B6200 Notebook BIOS
LifeBook B Series Notebook BIOS
BIOS SETUP UTILITY
The BIOS Setup Utility is a program that sets up the
operating environment for your notebook. Your BIOS is
set at the factory for normal operating conditions,
therefore there is no need to set or change the BIOS
environment to operate your notebook.
The BIOS Setup Utility configures:
■
■
Device control feature parameters, such as changing
I/O addresses and boot devices.
System Data Security feature parameters, such
as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility, do the following (or use
the TrustedCore Menu, as detailed in the next section):
1. Turn on or restart your notebook.
2. Press [F2] once the Fujitsu logo appears on the
screen. This will open the main menu of the BIOS
Setup Utility with the current settings displayed.
3. Press the [RIGHT ARROW] or [LEFT ARROW] key
to scroll through the other setup menus to review or
alter the current settings.
Using the TrustedCore Menu
When the Fujitsu logo appears on the screen. press the
[Enter] key or click on the left mouse or touchpad
button; the TrustedCore Menu will appear.
The TrustedCore Menu provides shortcuts to the
following menus and information screens:
■
■
■
■
■
■
BIOS Setup
Diagnostic Screen
Boot Menu
Patent Information
System Information
Continue Booting
Clicking on any of the fields will invoke the screen,
information, or action described.
The Boot Menu can also be invoked by pressing the
[F12] key when the Fujitsu logo appears on the screen.
2
Navigating through the Setup Utility
The BIOS setup utility consists of six menus: Main,
Advanced, Security, Boot, Info and Exit. This document
explains each menu and all submenus and setup items.
The following procedures allow you to navigate the
setup utility menus:
1. To select a menu, use the cursor keys: [
], [
].
2. To select a field within a menu or a submenu, use the
cursor keys: [ ], [ ].
• Selecting a field causes a help message
about that field to be displayed on the
right-hand side of the screen.
• Pressing [Enter] with the highlight on a
selection that is not a submenu or auto
selection will cause a list of all options
for that item to be displayed. Pressing
the Enter key again will select the highlighted choice.
3. To select the different values for each field, press the
[Spacebar] or [+] to change to the next higher selection and [F5] or [-] to go to the next lower selection.
4. To activate a submenu press [Enter].
5. To return to a menu from a submenu, press [Esc].
6. To go to Exit menu from another menu, press [Esc].
7. Pressing the [F9] key resets all items in the BIOS to
the default values.
8. Pressing the [F10] key saves the current configuration and exits the BIOS Setup Utility. You will be
asked to verify this selection before it is executed.
9. Pressing the [F1] key gives you a general help screen.
Entering the Setup Utility After a
Configuration Change or System Failure
If there has been a change in system configuration that
does not match the parameter settings stored in your
BIOS memory, or there is a failure in the system, the
system beeps and/or displays an error message after the
Power On Self Test (POST). If the failure is not severe, it
will give you the opportunity to modify the settings of
the setup utility, as described in the following steps:
Main Menu
1. When you turn on or restart the computer there is a
beep and/or the following message appears on the
screen:
Error message - please run SETUP
program Press <F1> key to continue,
<F2> to run SETUP
2. If an error message is displayed on the screen, and
you want to continue with the boot process and start
the operating system anyway, press the [F1] key.
If your settings require it, you may be
asked for a password before the operating
system will be loaded.
3. If an error message is displayed on the screen, and you
want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
3
LifeBook B6200 Notebook BIOS
MAIN MENU - SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. Follow the instructions for
Navigating through the Setup Utility to make any
changes.
the field’s function and any special information needed
to help understand the field’s use.
System Time and System Date can also be
set from your operating system without
using the setup utility. Use the Date and
Time icon on your Windows Control Panel.
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings and a description of
Main
Advanced
PhoenixBIOS Setup Utility
Security
Boot
Info
Exit
Item Specific Help
▲
System Time:
System Date:
[XX:XX:XX]
[XX/XX/XXXX]
Drive0
[Hitachi HTS541680J9SA00]
Language:
[English (US)]
Select Item
Select Menu
<Tab>, <Shift-Tab>, or
<Enter> selects field.
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
Adjust calendar clock.
F9 Setup Defaults
F10 Save and Exit
Figure 1. Main Menu
Table 1: Fields, Options and Defaults for the Main Menu
4
Menu Field
Option
Default
Description
System Time:
–—
–—
Sets and displays the current time. Time is in a 24 hour format of
hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time separately.
Move between the segments with the [Tab] key and/or [Shift] + [Tab]
keys.
System Date:
–—
–—
Sets and displays the current date. Date is in a month/day/year numeric
format with 2 digits each for month and day and 4 digits for year. (MM/
DD/YYYY) for example: 03/20/2008. You may change each segment of
the date separately. Move between the segments with the [Tab] key and/
or [Shift] + [Tab] keys.
Main Menu
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field
Option
Default
Description
Drive0:
Selects Primary
Master submenu
–—
Displays the type of device on this Serial ATA/IDE interface, if there is one.
Pressing the Enter key selects the Drive0 submenu allowing additional
device configuration options for this interface.
Language:
■
[English
(US)]
The default setting differs between the US/European and the Japanese
model. Selects the display language for the BIOS.
■
English (US)
Japanese (JP)
5
LifeBook B6200 Notebook BIOS
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies which ATA devices are
installed.
Main
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may also be displayed.
PhoenixBIOS Setup Utility
Security
Power
Boot
Advanced
Info
Item Specific Help
Drive0 [Hitachi HTS541680J9SA00]
Type:
Select Serial ATA/IDE
drive installed here.
[Auto]
LBA Format
156301488
80026MB SATA1
Total Sectors:
Maximum Capacity:
Exit
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
F9
F10
Setup Defaults
Save and Exit
Figure 2. Drive0 Submenu
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Menu Field
Options
Default
Description
Type:
■
[Auto]
Selects the Serial ATA/IDE device type. Select Auto to have the type automatically identified by the BIOS at POST. If None is selected, all of the following Set-up items do not appear.
■
Auto
None
LBA Format
Logical Block Addressing (LBA)
Total Sectors:
---
---
The total number of sectors on your hard disk
Maximum
Capacity:
---
---
The maximum capacity of your hard disk
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
6
Main Menu
ADVANCED MENU - SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
■
■
■
■
■
■
Turn NumLock on or off.
Select between the display panel and an external
display.
Enable or disable compensation for your display.
Configure internal controllers.
Configure CPU and USB features.
Configure Miscellaneous features
Main
Advanced
Follow the instructions for Navigating Through the
Setup Utility to make any changes.
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a description of the field’s function and any special information
needed to help understand the field’s use.
PhoenixBIOS Setup Utility
Security
Boot
Info
Exit
Item Specific Help
▲ ▲ ▲ ▲ ▲ ▲
Keyboard/Mouse Features
Video Features
Internal Device Configurations
CPU Features
USB Features
Miscellaneous Configurations
▲
Event Logging
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Configures keyboard/
mouse features.
F9 Setup Defaults
F10 Save and Exit
Figure 3. Advanced Menu
Table 3: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
Keyboard/Mouse
Features
When selected, opens the Keyboard/Mouse Features submenu, which allows setting NumLock.
Video Features
When selected, opens the Video Features submenu, which allows setting of the display parameters, including
routing of video signals to different displays.
Internal Device
Configurations
When selected, opens the Internal Device Configurations submenu, which allows enabling or disabling the IDE,
LAN, and modem controllers.
CPU Features
When selected, opens the CPU Features submenu, which allows configuration of CPU performance features.
7
LifeBook B6200 Notebook BIOS
Table 3: Fields, Options and Defaults for the Advanced Menu
8
Menu Field
Description
USB Features
When selected, opens the USB Features submenu, which allows enabling or disabling USB and SCSI Subclass
support.
Miscellaneous
Configurations
When selected, opens the Miscellaneous Configurations submenu, which allows you to change the power button, Wake Up On LAN, and Volume settings.
Event Logging
When selected, opens the Event Logging submenu which lets you view and enable the event log.
Advanced Menu
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the condition of the NumLock button.
.
Main
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Advanced
Keyboard/Mouse Features
Numlock:
Item Specific Help
[On] or [Off]
Numlock is On or Off.
[Off]
[On/Padlock Off]
Numlock is On, but use
with [Fn] for 10-key
input.
* Windows XP preserves
Numlock state when the
user logs off.
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 4. Keyboard/Mouse Features Submenu
Table 4: Fields, Options and Defaults for the Keyboard/Mouse Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Numlock:
■
[Off]
Sets the NumLock function state when the computer
completes booting.
■
■
On
Off
On/Padlock Off
9
LifeBook B6200 Notebook BIOS
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the display parameters.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Item Specific Help
Video Features
Display
Compensation:
[Auto]]
[Enabled]
Select display terminal.
*This setting is not
effective after
operating systems
starts up.
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 5. Video Features Submenu
Table 5: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Display:
■
Internal Flat Panel
External
Auto
[Auto]
Selects where the video signal will be routed. Note that once the
system boots up, the settings for the Windows video driver take
precedence over this setting.
Disabled
Enabled
[Enabled]
Enables or disables compensation which controls spacing on the display. When enabled, displays with less than pixel resolution 800 x
600 will still cover the entire screen.
■
■
Compensation:
■
■
10
Advanced Menu
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configurations submenu allows the user to configure other internal devices.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Item Specific Help
Internal Device Configurations
Serial ATA Controller:
AHCI Configuration:
Bluetooth(R):
LAN Controller:
Wireless LAN:
Select Item
Select Menu
[Enabled]
Serial ATA port is
enabled.
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
[Disabled]
Serial ATA port is
disabled.
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
F9 Setup Defaults
F10 Save and Exit
Figure 6. Internal Device Configurations Submenu
Table 6: Fields, Options and Defaults for the Internal Device Configurations Submenu of Advanced Menu
Menu Field
Options
Default
Description
Serial ATA Controller:
■
Disabled
Enabled
[Enabled]
Enables or disables selected IDE devices. (Note that if a solid-state
drive is installed, “IDE Controller” appears here rather than “Serial
ATA Controller”.)
Disabled
Enabled
[Enabled]
Enables or disables the selected AHCI (Advanced Host Controller
Interface).
Disabled
Enabled
[Enabled]
Enables or disables the Bluetooth device.
Disabled
Enabled
[Enabled]
Enables or disables the LAN controller.
Disabled
Enabled
[Enabled]
Enables or disables the wireless LAN device.
■
AHCI Configuration:
■
■
Bluetooth(R):
■
■
LAN Controller:
■
■
Wireless LAN:
■
■
11
LifeBook B6200 Notebook BIOS
CPU Features Submenu of the Advanced Menu
The CPU Features submenu configures certain features of the CPU in the system.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
CPU Features
Item Specific Help
Core Multi-Processing
[Enabled]
SpeedStep(R) Technology:
On Battery:
On AC:
[Enabled]
[Battery Optimized]
[Maximum Performance]
Select Core
Multi-Processing
enabled or disabled.
XD Bit functionality:
[Enabled]
Virtualization Technology: [Disabled]
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 7. CPU Features Submenu
Table 7: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Core
Multi-Processing
■
Disabled
Enabled
[Enabled]
Enables or disables the Core Multi-Processing feature.
SpeedStep(R)
Technology:
■
Disabled
Enabled
[Enabled]
Enables or disables SpeedStep(R) Technology.
On Battery:
■
Maximum Performance
Battery Optimized
Automatic
[Battery
Optimized]
Allows the user to select the power conditions when the system is running on battery power.
Maximum Performance
Battery Optimized
Automatic
[Maximum
Performance]
Allows the user to select the power conditions when the system is running on AC power.
Disabled
Enabled
[Enabled]
Allows the user to enable and disable the Execute Disable Bit
functionality. Execute Disable Bit allows the processor to
classify areas in memory where application code can and cannot execute. In the event an internet worm attempts to insert
code in the buffer, the processor disables code execution to
prevent damage or worm propagation.
Disabled
Enabled
[Disabled]
Enables or disables the Virtualization Technology feature.
Note that after changing this option, the system must first be
rebooted for it to take effect.
■
■
■
■
On AC:
■
■
■
XD Bit
functionality:
■
Virtualization
Technology
■
12
■
■
Advanced Menu
USB Features Submenu of the Advanced Menu
The USB Features submenu configures the USB capabilities of the system.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
USB Features
Legacy USB Support:
SCSI SubClass Support:
Item Specific Help
[Enabled]
[Enabled]
[Disabled]
The feature is disabled.
[Enabled]
Legacy USB Emulation
is enabled and USB
devices are available
without USB aware OS.
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 8. USB Features Submenu
Table 8: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Legacy USB Support:
■
Disabled
Enabled
[Enabled]
When Disabled is selected, legacy USB emulation is disabled. When
Enabled is selected, legacy USB emulation is enabled and USB
devices are available without USB-aware OS.
Disabled
Enabled
[Enabled]
When Enabled is selected, USB devices that belong to the SCSI subclass in the mass storage class (e.g., USB Memory Key) are enabled.
Note that enabling this feature may cause the system to hang during POST, depending on the device that is connected.
■
SCSI SubClass Support:
■
■
13
LifeBook B6200 Notebook BIOS
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations submenu configures several features of the system, including power button and
volume settings, video memory size, and power management settings.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Miscellaneous Configurations
Power Button:
Wake up on LAN:
Force LAN Boot:
Volume Setting:
UMA Video Memory Size:
Hardware Power Management:
Touch Panel Setting:
Select Item
Select Menu
[Disabled]
[Disabled]
[Disabled]
[Middle]
[128MB]
[Enabled (Level1)]
[Tablet]
Configures the power
button.
*ACPI OS ignores this
setting.
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Figure 9. Miscellaneous Configurations Submenu
Table 9: Fields, Options and Defaults for the Miscellaneous Configurations Submenu
Menu Field
Options
Default
Description
Power Button:
■
Disabled
Power Off
[Disabled]
When Disabled is selected, pressing power button does not affect power.
When Enabled is selected, pressing the button powers off the system.
Disabled
Enabled
[Disabled]
When Enabled is selected, the system will wake up when the internal LAN
receives a Magic Packet while it is powered off.
Disabled
Enabled
[Disabled]
(Can only be selected when Wake Up On LAN is enabled.) When this is
enabled, the system will first try to boot from the LAN before attempting to
boot from any other device regardless of the BIOS priority settings or whether
Preboot Execution Environment is disabled.
Off
Minimum
Middle
Maximum
[Middle]
Allows you to set or disable the system volume level.
64MB
128MB
224MB
[128MB]
Reflects the maximum allocated shared video memory size. Video memory is
dynamically allocated as needed for running Intel(R) DVMT (Dynamic Video
Memory Technology).
■
Wake up on
LAN:
■
Force LAN
Boot:
■
Volume
Setting:
■
■
■
■
■
■
UMA Video
Memory Size:
■
■
■
14
Advanced Menu
Table 9: Fields, Options and Defaults for the Miscellaneous Configurations Submenu
Menu Field
Options
Default
Description
Hardware
Power
Management:
■
Disabled
Enabled (Level1)
Enabled (Level2)
[Enabled
(Level1)]
This allows you to enable or disable the running of Hardware Power
Management. Level1 is standard hardware management; Level2 is deeper
than Level1.
Touch Panel
Setting:
■
Touch Panel
Tablet
[Touch
Panel]
Select [Touch Panel] to enable the touch panel mode. Select [Tablet] to enable
the tablet mode.
■
■
■
15
LifeBook B6200 Notebook BIOS
Event Logging Submenu of the Advanced Menu
The Event Logging submenu is for setting up the logs for DMI event logging.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Item Specific Help
Event Logging
Event Log Capacity:
Event Log Validity:
Space Available
Valid
View Event Log:
[Enter]
Event Logging:
System Boot Event:
[Enabled]
[Disabled]
Clear All Event Logs:
[No]
Mark Events as Read:
[Enter]
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
Press <Enter> key to
view the contents of
the event log.
F9 Setup Defaults
F10 Save and Exit
Figure 10. Event Logging Submenu
Table 10: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Event Log Capacity:
Space
Available
Display only
Event Log Validity:
Valid
Display only
View Event Log:
■
Enter
[Enter]
Allows you to view content of event log.
Event Logging:
■
Disabled
Enabled
[Enabled]
Turns event logging on and off for all DMI events.
Disabled
Enabled
[Disabled]
Turns event logging on and off for DMI system boot events.
No
Yes
[No]
When set to [Yes] all event logs will be cleared at next boot.
Enter
[Enter]
Allows you to mark events currently in the event log as read.
■
System Boot Event:
■
■
Clear All Event Logs:
■
■
Mark Events as Read:
16
■
Security Menu
SECURITY MENU - SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current data security configuration.
Follow the instructions for Navigating Through the
Setup Utility to make any changes.
■
The following tables show the names of the menu fields
for the Security menu and its submenus, all the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use. The default condition
is no passwords required and no write protection.
■
If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access to
your secured functions and data.
Main
Advanced
■
PhoenixBIOS Setup Utility
Security
Boot
Info
If you make an error when re-entering
the password a [Warning] will be
displayed on the screen. To try again,
press the Enter key and then retype the
password. Press the Esc key to abort the
password setting process.
Entering a password incorrectly three
times in a row will cause the keyboard
and mouse to be locked out and the
warning [System Disabled] to be
displayed. If this happens, restart the
computer by turning off and on the
power with the power switch and use
the correct password on reboot.
If the Password on Resume is Enabled
and the Password on Boot is Disabled
you will not have to type your password
upon resuming the system from the
Standby or Hibernate modes. Power
Management Security will work only if
Password on Boot is enabled.
Exit
Item Specific Help
▲ ▲ ▲
Supervisor Password Is:
User Password Is:
Clear
Clear
Set Supervisor Password
Set User Password
Minimum User Password Length
Password on Boot:
On Automatic Wake up:
KB Lock on Resume:
Boot from Removable Media:
Flash Write:
Hard Disk Security
Owner Information
Security Chip Setting
Security Panel on Resume:
[Enter]
[Enter]
[0]
[Disabled]
[Disabled]
[Disabled]
[All]
[Enabled]
Select Item
Select Menu
Then password entry is
required to enter BIOS
Setup.
[Enabled]
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
Press <Enter> key to
set Supervisor Password
to enable any password
features.
F9 Setup Defaults
F10 Save and Exit
Figure 11. Security Menu
17
LifeBook B6200 Notebook BIOS
Table 11: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
Supervisor Password is:
–—
Clear
A display-only field. Set is displayed when the system supervisor password
is set and Clear when it is not.
User Password is:
–—
Clear
A display-only field. Set is displayed when the general user password is set,
and Clear when it is not.
Set Supervisor Password
–—
[Enter]
Sets, changes or cancels the Supervisor Password. The Supervisor Password may be up to seven characters long and must include only letters or
numbers (no symbols). Passwords are NOT case-sensitive. To cancel a
password press the Enter key instead of entering characters in the Enter
New Password field and in the Re-enter New Password field. When a
Supervisor Password is set it must be used to access the BIOS setup utility.
Set User Password
–—
[Enter]
Can only be accessed if Supervisor Password is set. Sets, changes or cancels User Password. User Password may be up to seven characters long
and must include only letters or numbers (no symbols). Passwords are
NOT case-sensitive. To cancel a password press [Enter] key instead of
entering characters in the Enter New Password and Re-enter New Password fields. When a User Password is set it must be used to access the
BIOS utility.
Minimum User
Password Length:
–—
[0]
Can only be accessed if Supervisor Password is set. Set the minimum
length for User Password.
Password on Boot:
■
Disabled
First Boot
Every Boot
[Disabled]
When Disabled, no password is required. When set to First Boot, password
entry required only before first boot. When Every Boot is selected, password required whenever the system is booted.
Disabled
Enabled
[Disabled]
When disabled, password entry is not required on automatic wake-up on
LAN or RTC. When enabled, password entry is required on automatic
wake-up on LAN or RTC.
Disabled
Enabled
[Disabled]
When Enabled, PS/2 keyboard or mouse inputs are locked out at Resume
From Standby or Hibernate modes until entering password.
All
Supervisor
only
[All]
When Supervisor Only is selected, only the Supervisor can boot from
removable media. Only the user who enters the Supervisor Password
before OS boot is treated as the Supervisor. When All is selected, boot
from removable media is not restricted.
Disabled
Enabled
[Enabled]
When disabled, the BIOS Flash Memory is write-protected; when enabled,
it is not.
■
■
On Automatic Wake Up:
■
■
KB Lock on Resume:
■
■
Boot from
Removable Media:
■
Flash Write:
■
■
■
Hard Disk Security:
–—
–—
When selected, opens the Hard Disk Security submenu, which allows you
to configure hard disk security features.
Owner Information
–—
–—
When selected, opens the Owner Information submenu, which allows you
to set Owner information.
Security Chip Setting
___
___
When selected, opens the Security Chip Settings submenu, which allows
you to set settings for the security chip.
Security Panel on Resume:
■
[Enabled]
When enabled, the Security Panel feature is enabled upon Resume from
Suspend.
■
Disabled
Enabled
Exiting from the Security Menu
When you finish setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. To exit from setup utility, press [Esc] key to go to Exit Menu. To move to another menu, use the cursor
keys.
18
Security Menu
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Hard Disk Security
Drive0:
Set Master Password:
Set User Password
Clear
[Enter]
[Enter]
Password Entry on Boot:
[Enabled]
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Figure 12. Hard Disk Security Submenu
Table 12: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Default
Description
Drive0:
Clear
A display-only field. Set is displayed when the Drive0 Password is set and Clear when it is not.
Set Master
Password
[Enter]
Sets, changes or cancels Master Password. The Master Password may be up to seven characters
long and include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a password press the Enter key instead of entering characters in the Enter New Password field
and in the Re-enter New Password field. When a Master Password is set it must be used to access
the hard disk. Data on the hard disk cannot be read on other systems.
Set User
Password
[Enter]
Sets, changes or cancels User Password. The User Password may be up to seven characters long
and include only letters or numbers (no symbols). Passwords are NOT case-sensitive. To cancel a
password press the Enter key instead of entering characters in the Enter New Password field and
in the Re-enter New Password field.
Password Entry
on Boot:
[Enabled]
When set to Disabled, it is not necessary to enter a Hard Disk Password before booting the OS.
The hard disk is still password-protected without password entry.
19
LifeBook B6200 Notebook BIOS
Owner Information Submenu of the Security Menu
The Owner Information submenu is for setting owner information.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Item Specific Help
Owner Information
Owner Information Is:
Clear
Set Owner Information
[Enter]
Foreground Color:
Background Color:
[Gray]
[Black]
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
▲
F1 Help
ESC Exit
Figure 13. Owner Information Submenu
Table 13: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field
Options
Default
Description
Owner Information Is:
–—
Clear
Display only. (Will only be
displayed if the Supervisor
Password is set).
Set Owner
Information:
–—
[Enter]
Field to write owner
information, i.e. name.
Foreground Color:
■
■
■
■
■
■
Background Color:
■
■
■
■
■
■
20
Black
Blue
Green
Cyan
Red
Magenta
■
Black
Blue
Green
Cyan
Red
Magenta
■
■
■
■
■
■
■
■
■
Brown
White
Gray
Light Blue
Light
Green
■
Brown
White
Gray
Light Blue
Light
Green
■
■
■
■
■
■
■
■
■
Light Cyan
Light Red
Light
Magenta
Yellow
Bright White
[Gray]
Light Cyan
Light Red
Light
Magenta
Yellow
Bright White
[Black]
Security Menu
Security Chip Setting Submenu of the Security Menu
The Security Chip Setting Security submenu is for configuring security chip features.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Exit
Security Chip Setting
Security Chip:
Clear Security Chip
[Enabled]
[Enter]
Security Chip State:
Enabled
Activated
Select Item
Select Menu
-/Space Change Values
Enter
Select Sub-Menu
▲
F1 Help
ESC Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Figure 14. Security Chip Setting Submenu
Table 14: Fields, Options, and Defaults for the Security Chip Setting Submenu of the Security Menu
Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.
Menu Field
Options
Default
Description
Security Chip:
■
[Enabled]
Allows you to enable or disable the Security Chip. When disabled,
the following field does not appear.
■
Disabled
Enabled
Clear Security Chip
____
[Enter]
Allows you to clear the security chip. Note that if you clear the security chip, you will not be able to access data that has already been
encrypted.
Security Chip State:
____
Enabled
Activated
Display only. Indicates the current state of the security chip.
21
LifeBook B6200 Notebook BIOS
BOOT MENU - SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the BIOS searches sources for the operating system. Follow the
instructions for Navigating Through the Setup Utility to make any changes. The tables show the names of the menu
fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the
field's function and any special information needed to help understand the field's use.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Boot
Item Specific Help
▲
Quick Boot:
Boot Time Diagnostic Screen:
Boot Menu:
Preboot Execution Environment
Boot Device Priority
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
All diagnostic tests
will be done.
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
Select Item -/Space Change Values
Enter Select Sub-Menu
Select Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 15. Boot Menu
Table 15: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
Default
Description
QuickBoot:
■
Disabled
Enabled
[Enabled]
Turns booting on and off with a truncated set of Power On
Self Tests. (Fewer tests mean faster turn on.)
Disabled
Enabled
[Disabled]
Turns on and off display of test results instead of Fujitsu logo
screen during Power On Self Test.
Disabled
Enabled
[Enabled]
This field is not active unless the Supervisor’s Password has
been set. When disabled, access to the Boot Menu with the
[F12] key is disabled. When enabled, the Boot Menu is
enabled and the [F12] key will allow you to display it.
Disabled
Enabled
Enabled]
Turns off and on the preboot execution environment feature.
Selects Boot
Device Priority
submenu
—
This menu allows setting up the source for the operating
system.
■
Boot-time Diagnostic
Screen:
■
Boot Menu:
■
■
■
Preboot Execution
Environment
■
Boot Device Priority
■
22
■
Boot Menu
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Boot
Boot Device Priority
Item Specific Help
Keys used to view or
configure devices:
Boot priority order:
1: Floppy Disk Drive
2: Drive0: Hitachi HTS541680J9SA00
3: CD/DVD Drive
4: NETWORK: B02 D00 Yukon PXE
5:
6:
7:
8:
Excluded from boot order:
: USB MEMORY: None
: USB HDD: None
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
<+>/<Space> or <->
moves the device up or
down.
<x> exclude or include
the device to boot.
F9 Setup Defaults
F10 Save and Exit
Figure 16. Boot Device Priority Submenu
Table 16: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Description
Boot priority order:
1: Floppy Disk Drive
2: Drive0:
3: CD/DVD Drive
4: NETWORK:
5:
6:
7:
8:
Excluded from boot order:
: USB MEMORY:
: USB HDD:
The boot selections determine the order in which the BIOS searches for the operating system during
a startup sequence. To change the order, highlight one source by using the [up] or [down] cursor
keys and then press the [+] or [-] key to change the order number. Tapping [x] removes from the list
a device that is not installed. Tapping [x] on an item in the Excluded list adds the device to the Boot
priority list. Be sure to save your changed order when you exit the BIOS setup utility.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be
overwritten, depending upon your operating environment.
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish
to move to another menu, use the cursor keys.
23
LifeBook B6200 Notebook BIOS
INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION
The Info menu is a display-only screen that provides the
configuration information for your notebook.
The information displayed on this screen is
variable according to the unit you
purchased.
The following table shows the names of the menu fields
for the Info menu and the information displayed in
those fields. These fields are for information purposes
only, and are not editable.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Boot
BIOS Version:
BIOS Date:
BIOS Area:
1.XX
XX/XX/200X
E000h - FFFFh
CPU Type:
CPU Speed:
L1 Cache:
L2 Cache:
Intel(R)Core(TM)2 CPU U7500
1.06 GHz
128 KB
2048 KB
Info
Total Memory:
2048 MB
Memory Slot 1: 1024 MB DDR SDRAM
Memory Slot 2: 1024 MB DDR SDRAM
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
F9 Setup Defaults
F10 Save and Exit
Figure 17. Info Menu
Table 17: Fields, Options and Defaults for the Info Menu
Menu Field
Default
Menu Field
Default
BIOS Version:
1.xx
L1 Cache:
128 KB
BIOS Date:
mm/dd/yyyy
L2 Cache:
2048 KB
BIOS Area:
E000h – FFFFh
Total Memory:
2048 MB
CPU Type:
Intel(R) Core(TM)2 CPU U7500
Memory Slot 1:
1024 MB DDR SDRAM
CPU Speed:
1.060 GHz
Memory Slot 2:
1024 MB DDR SDRAM
24
Exit Menu
EXIT MENU - LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating through the Setup Utility to
make any changes. The table shows the names of the menu fields for the Exit menu and a description of the field's
function and any special information needed to help understand the field's use.
Main
Advanced
PhoenixBIOS Setup Utility
Security
Power Savings
Boot
Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
▲
F1 Help
ESC Exit
Exit System Setup and
save your changes to
CMOS.
F9 Setup Defaults
F10 Save and Exit
Figure 18. Exit Menu
Table 18: Fields, Options and Defaults for the Exit Menu
Menu Field
Description
Exit Saving
Changes
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and then
exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes] [No] will be displayed.
Exit Discarding
Changes
Selecting Exit Discarding Changes and Exit will exit the setup utility immediately without writing to the BIOS memory
and without displaying a confirmation screen. When the BIOS recognizes this selection it will load the operating system
and begin operation.
Load Setup
Defaults
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit Menu. To return to
another menu follow the directions in the Navigating through the Setup Utility section.
Discard
Changes
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load previous configuration now? [Yes] [No] will be displayed. When confirmed the setup utility will return to the Exit menu. To
return to another menu, follow the directions in the Navigating through the Setup Utility section.
Save Changes
Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory. The message Save
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to the Exit
menu. To return to another menu, follow the directions in the Navigating through the Setup Utility section.
Save Changes
and Power Off
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory, then
power the system off. The message Save configuration changes now and power off? [Yes] [No] will
be displayed. When confirmed, the setup utility shut down the system.
25
Download PDF

advertising