FUNAI DP100HH8A CD Player User Manual

Owner’s Manual
Please read before using this unit.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
DVD/CD Player
DP100HH8 A
Contents
SEARCH
MODE
1
2
OPEN/CLOSE
SETUP
AUDIO
3
SUBTITLE
4
5
7
8
■ Important Safeguards .................................................. .2
■ About the Discs ............................................................ .5
Playable Discs ................................................................ .5
Unplayable Discs ............................................................ .5
6
ANGLE
REPEAT
CLEAR
A-B
PAUSE
9
+10
0
Owner's Manual
SKIP
PLAY
REV
FWD
STOP
SETUP
TOP MENU
MODE
MENU
ENTER
ZOOM
RETURN
Connecting to RF Modulator (Not Supplied)
If your TV has antenna in jack only, it is still possible
to connect this unit to your TV by using an RF
modulator. In this case, follow the instructions below.
1) Disconnect the power cords of the devices from
the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to
either 3 or 4, whichever the TV channel is least
used in your area. If your RF modulator has a
modulator/antenna switch, set it according to the
manual supplied with the RF modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel
as you set the RF modulator’s channel 3/4
switch to. For more details, follow the manual
supplied with the RF modulator.
rear of this unit
CB/PB
Y
L
DIGITAL
AUDIO OUT
R
S-VIDEO
OUT
CR/PR
VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO
OUT
COAXIAL
RCA video cable
L
R
VIDEO
OUT
rear of TV
AUDIO
OUT
RCA audio cable
ANT. IN
rear of your RF
modulator
VHF / UHF
antenna
RF coaxial cable
or
RF coaxial
cable
cable TV
company
ANT. IN
3
4
CHANNEL
R
L
AUDIO IN
VIDEO IN
TO TV
Set channel 3 or 4
■ Connections .................................................................. .6
Connection to a TV......................................................... .6
Connection to an Audio System ..................................... .7
Rear Terminals ............................................................... .7
■ About the Remote Control........................................... .8
Remote Control .............................................................. .8
Installing the Batteries for the Remote Control .............. .8
DVD FUNCTIONS
■ Playback ........................................................................ .9
■ MP3 Playback............................................................... .10
■ Search Functions ........................................................ .10
Using Track Search ....................................................... .10
Using Title / Chapter Search ......................................... .10
Using Time Search ........................................................ .10
■ On-Screen Display....................................................... .11
■ Repeat / Random / Programmed Playback ............... .12
Repeat Playback ........................................................... .12
Repeat A-B Playback .................................................... .12
Random Playback ......................................................... .12
Programmed Playback .................................................. .12
■ Special Settings ........................................................... .13
Subtitle Language.......................................................... .13
Audio Language ............................................................ .13
Camera Angles .............................................................. .13
Black Level Setting ........................................................ .13
Stereo Sound Mode....................................................... .13
Virtual Surround............................................................. .13
■ DVD Setting .................................................................. .14
LANGUAGE Setting ...................................................... .14
DISPLAY Setting ........................................................... .15
AUDIO Setting ............................................................... .15
PARENTAL Setting ....................................................... .16
OTHERS Setting ........................................................... .16
Reset to the Default Setting
(Except for PARENTAL Setting).................................... .17
SETUP
DISPLAY
owner’s manual
(1VMN24994)
INFORMATION DVD FUNCTIONS
STANDBY-ON
RCA audio/video
cables
(WPZ0102TM018/
WPZ0102LTE01)
Español
remote control
(NB094UD)
batteries (AA x2)
PRECAUTIONS
PRECAUTIONS
Supplied Accessories
INFORMATION
Note:
• RF modulator is not supplied with this unit. You need to
purchase it at your local store.
• The quality of picture may become poor if this unit is
connected to an RF modulator.
If you need additional operating assistance
after reading this owner’s manual, please call
■
■
■
■
■
Troubleshooting Guide ............................................... .17
Specifications .............................................................. .18
LIMITED WARRANTY .................................................. .18
Español ......................................................................... .19
Quick Use Guide ............................................ Back Cover
TOLL FREE : 1-800-317-6062
or visit our web site at
http://www.funai-corp.com
© 2008 Funai Electric Co., Ltd.
E6KPTUD_DP100HH8 A.indd 1
2008/01/08 14:13:02
PRECAUTIONS
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.
Model No.:
Serial No.:
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPARATUS TO RAIN OR MOISTURE.
PRECAUTIONS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
apparatus’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus.
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear or bottom of the cabinet.
Important Safeguards
1. READ INSTRUCTIONS - All the safety and operating instructions should be
read before the apparatus is operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be
retained for future reference.
3. HEED WARNINGS - All warnings on the apparatus and in the operating
instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be
followed.
5. CLEANING - Unplug this apparatus from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
EXCEPTION: An apparatus that is meant for uninterrupted service and, that
for some specific reason, such as the possibility of the loss of an authorization
code for a CATV converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference to unplugging the
apparatus in the cleaning description otherwise required in item 5.
6. ATTACHMENTS - Do not use attachments not recommended by the
apparatus manufacturer as they may cause hazards.
7. WATER AND MOISTURE - Do not use this apparatus near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, and the like.
8. ACCESSORIES - Do not place this apparatus on an
unstable cart, stand, tripod, bracket, or table. The apparatus
may fall, causing serious injury to someone, and serious
damage to the apparatus. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer,
or sold with the apparatus. Any mounting of the apparatus
should follow the manufacturer’s instructions and should
use a mounting accessory recommended by the manufacturer. An apparatus
and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the apparatus and cart combination to
overturn.
AMEUBLES - Cet appareil ne doit être placé que sur un meuble (avec ou
sans roulettes) recommandé par le fabricant. Si vous l’installez sur un meuble
à roulettes, déplacez les deux ensembles avec précaution. Un arrêt brusque,
l’utilisation d’une force excessive et des surfaces irrégulières risquent de
déstabiliser l’ensemble et de le renverser.
9. VENTILATION - Slots and openings in the cabinet and the back or bottom
are provided for ventilation and to ensure reliable operation of the apparatus
and to protect it from overheating, these openings must not be blocked or
covered. The openings should never be blocked by placing the apparatus on
a bed, sofa, carpet, rug, or other similar surface. This apparatus should never
be placed near or over a radiator or heat register. This apparatus should not
be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.
10. POWER SOURCES - This apparatus should be operated only from the type
of power source indicated on the marking label. If you are not sure of the type
of power supply to your home, consult your apparatus dealer or local power
company. For the apparatus’s intended to operate from battery power, or other
sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION - This apparatus is equipped with a
polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed upon
or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the apparatus.
13. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable
system is connected to the apparatus, be sure the antenna or cable system
is grounded so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National Electrical Code, ANSI/
NFPA No. 70, provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements for the grounding
electrode. (Fig. A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
14. LIGHTNING - For added protection for this apparatus receiver during a
lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the apparatus due to lightning and
power-line surges.
15. POWER LINES - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light of power circuits, or
where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
16. OVERLOADING - Do not overload wall outlets and extension cords as this
can result in a risk of fire or electric shock.
17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this
apparatus through openings as they may touch dangerous voltage points or
short out parts that could result in a fire or electric shock. Never spill liquid of
any kind on the apparatus.
18. SERVICING - Do not attempt to service this apparatus yourself as opening
or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE - Unplug this apparatus from the wall
outlet and refer servicing to qualified service personnel under the following
conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the apparatus.
c. If the apparatus has been exposed to rain or water.
d. If the apparatus does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions, as improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the apparatus to its normal operation.
e. If the apparatus has been dropped or damaged in any way.
f. When the apparatus exhibits a distinct change in performance, this
indicates a need for service.
20. REPLACEMENT PARTS - When replacement parts are required, be sure the
service technician uses replacement parts specified by the manufacturer that
have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, injury to persons or other hazards.
21. SAFETY CHECK - Upon completion of any service or repairs to this
apparatus, ask the service technician to perform routine safety checks to
determine that the apparatus is in proper operating condition.
22. HEAT - This apparatus should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers) that
produce heat.
–2–
E6KPTUD_DP100HH8 A.indd 2
ANTENNA
LEAD
WIRE
EN
2008/01/08 14:13:03
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’au fond.
RADIO-TV INTERFERENCE
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does
cause harmful interference to radio or television reception, which can be determined by turning the apparatus off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the apparatus and receiver.
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
PRECAUTIONS
FCC WARNING
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may
cause harmful interference unless the modifications are expressly approved in the manual. The user could lose
the authority to operate this apparatus if an unauthorized change or modification is made.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the
grounding system of the building as close to the point of cable entry as practical.
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service
this apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product
incorporates copyright protection technology that is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
–3–
E6KPTUD_DP100HH8 A.indd 3
EN
2008/01/08 14:13:04
TO AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
PRECAUTIONS
LOCATION AND HANDLING
• Do not install the unit in direct sunlight, near strong
magnetic fields, or in a place subject to dust or
strong vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position.
Do not place anything directly on top or bottom of
the unit. Depending on your external devices, noise
or disturbance of the picture and/or sound may be
generated if the unit is placed too close to them. In
this case, please ensure enough space between the
external devices and the unit.
• Depending on the environment, the temperature
of this unit may increase slightly. This is not a
malfunction.
TRADEMARK INFORMATION
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
Product that have earned ENERGY STAR®
are designed to protect the environment
through superior energy efficiency.
MAINTENANCE
Servicing
• Please refer to relevant topics on the “Troubleshooting
Guide” on page 17 before returning the unit.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call
our help line mentioned on the front page to locate an
authorized service center.
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
Cleaning Discs
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
Cleaning the Disc Lens
• If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in
this owner’s manual, the laser optical pickup unit may be
dirty. Consult your dealer or an authorized service center
for inspection and cleaning of the laser optical pickup unit.
Disc Handling
• When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
• Always store the disc in its protective case when not in
use.
is a trademark of DVD Format/Logo
Licensing Corporation.
DEW CONDENSATION WARNING
• Dew condensation may form inside the unit in the
following conditions. If so, do not use this unit at
least for a few hours until its inside gets dry.
- The unit is moved from a cold place to a warm
place.
- Under conditions of high humidity.
- After heating a cold room.
NOTE ABOUT RECYCLING
• This unit’s packaging materials are
recyclable and can be reused. Please
dispose of any materials in accordance
with your local recycling regulations.
• Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
SYMBOLS USED IN THIS MANUAL
The following symbols appear in some headings in this
manual.
: Description refers to DVD-video.
: Description refers to audio CD.
: Description refers to CD-RW/-R with MP3 files.
© 2008 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be
reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form
or for any purpose without the express prior written consent
of Funai. Furthermore, any unauthorized commercial
distribution of this manual or any revision hereto is strictly
prohibited.
Information in this document is subject to change without
notice. Funai reserves the right to change the content
herein without the obligation to notify any person or
organization of such changes.
with the
design is a registered trademark of
Funai Electric Co., Ltd and may not be used in any way
without the express written consent of Funai. All other
trademarks used herein remain the exclusive property
of their respective owners. Nothing contained in this
manual should be construed as granting, by implication or
otherwise, any license or right to use any of the trademarks
displayed herein. Misuse of any trademarks or any other
content in this manual is strictly prohibited. Funai shall
aggressively enforce its intellectual property rights to the
fullest extent of the law.
–4–
E6KPTUD_DP100HH8 A.indd 4
EN
2008/01/08 14:13:04
About the Discs
Playable Discs
Type of
media
Mark (logo)
DVD-video
Region code
Recorded
signals
Disc
size
digital video
(MPEG2)
5 inches
(12 cm)
or
3 inches
(8 cm)
Disc types
or
DVD-RW
DVD-R
*1, 3, 4, 5, 6,
7, 8, 9
e.g.)
title 1
title 2
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1 chapter 2
DVD+RW
DVD+R
*1, 4, 5, 6,
8, 9
audio CD
*4, 6, 9
CD-RW
CD-R
*4, 5, 6, 8, 9,
audio CD
digital audio
e.g.)
track 1
digital audio
or
MP3
5 inches
(12 cm)
or
3 inches
(8 cm)
MP3
PRECAUTIONS
*1, 2, 4, 6, 9
e.g.)
file 1
track 2
track 3
track 4
track 5
file 4
file 1
folder 1
file 2
file 3
track 6
folder 2
file 2
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played
back.
*2: Certain DVD-video do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or
special properties of discs.
*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them
back. Even if they are played back, the sound or video quality will be compromised.
*7: Only the discs recorded in the video format and finalized can be played back. Unfinalized discs cannot be played back.
Depending on the recording status of a disc, the disc may not be played back at all. The picture or sound may not be
smooth, etc.
*8: If the recorded portion of the disc is too small (smaller than 2-3/16 inches (55mm) across), it may not be played back.
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
Unplayable Discs
NEVER play back the following discs as malfunction may result!
DVD-RAM / DVD-audio / CD-i / photo CD / video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM
for personal computers / CD-ROM for personal computers / HD DVD / Blu-ray Disc
On the following disc, the sound MAY NOT be heard.
super audio CD
Any other discs without compatibility indications
Note:
• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio
CD layer cannot be delivered.
–5–
E6KPTUD_DP100HH8 A.indd 5
EN
2008/01/08 14:13:05
SETUP
Connections
Connection to a TV
TV
analog audio
Method 1
Method 2
Method 3
standard picture
good picture
better picture
COMPONENT
VIDEO IN
AUDIO IN
R
L
S-VIDEO IN
CB
or
RCA video
cable
RCA audio
cable
Y
Y
VIDEO IN
and
COMPONENT
VIDEO IN
or
or
PB
PR
CR
component
video cable
S-video cable
SETUP
This unit
L
CB/PB
CB/PB
Y
L
Y
L
DIGITAL
AUDIO OUT
CR/PR
S-VIDEO
OUT
VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO
OUT
DIGITAL
AUDIO OUT
R
R
R
COAXIAL
AUDIO
OUT
VIDEO
OUT
AUDIO OUT
VIDEO
CR/PR
OUT
COMPONENT
VIDEO OUT
S-VIDEO
OUT
VIDEO OUT
S-VIDEO OUT
AUDIO COAXIAL
OUT
COMPONENT VIDEO OUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note:
• Connect this unit directly to the TV. If RCA audio/video cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
If your TV is compatible with 525 progressive scanning and you want to enjoy that high quality picture;
You must select the connection Method 3 above and progressive scanning mode. To set the mode, set “PROGRESSIVE”
to “ON” in “DISPLAY” menu, so that the P-SCAN indicator on the front panel lights up. Refer to pages 14-15 for more
details.
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or
not be output at all.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding
[PLAY B] on the front of the unit for more than 5 seconds, so that the P-SCAN indicator on the front panel turns off.
After connecting to your TV:
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.
Please refer to your TV’s manual for details.
INPUT MODES FOR COMMON TV BRANDS
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
Hitachi:
JVC:
Kenwood:
LXI-Series:
Magnavox:
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO1, VIDEO2, VIDEO3
AUX
00
AUX CHANNEL
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
Sony:
Toshiba:
Zenith:
–6–
E6KPTUD_DP100HH8 A.indd 6
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
EN
2008/01/08 14:13:08
Connection to an Audio System
Analog Audio Connection
Digital Audio Connection
stereo system
Audio
Dolby Digital decoder,
MD deck or DAT deck
COAXIAL
digital audio
input jack
analog audio
input jacks
L
R
digital audio
coaxial cable
DIGITAL
AUDIO OUT
RCA audio cable
DIGITAL
AUDIO OUT
This unit
Setting
Connection
AUDIO OUT
R
AUDIO
OUT
SETUP > AUDIO>
DOLBY DIGITAL
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
Connecting to the other device
(an MD deck or DAT deck etc.)
without Dolby Digital decoder.
SETUP
L
COAXIAL
BITSTREAM
PCM
* To complete these settings, refer to pages 14-15.
Note:
Supplied cables used in this connection are as
follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables
at your local store.
• The audio source on a disc in a Dolby Digital
multi-channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• By hooking this unit up to a Dolby Digital decoder, you
can enjoy high-quality Dolby Digital multi-channel
surround sound as heard in the movie theaters.
• Playing back a DVD using incorrect settings may
generate noise distortion and may also damage the
speakers.
Rear Terminals
1
2
CB/PB
4
5
Y
L
DIGITAL
AUDIO OUT
R
CR/PR
S-VIDEO
OUT
VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO
OUT
COAXIAL
3
1 S-VIDEO OUT jack
Connect an optional S-video cable here through the S-video in jack of a television.
2 COMPONENT VIDEO OUT jacks
Connect optional component video cable here through the component video in jacks of a television.
3 VIDEO OUT jack
Connect a yellow video cable here through the video in jack of a television.
4 AUDIO OUT jacks
Connect an audio cable here through the audio in jacks of a television or other audio device.
5 DIGITAL AUDIO OUT COAXIAL jack
Connect a digital audio coaxial cable here through the digital audio coaxial in jack of a decoder or audio receiver.
Note:
• Please purchase the necessary cables at your local store. (Refer to pages 6-7.)
–7–
E6KPTUD_DP100HH8 A.indd 7
EN
2008/01/08 14:13:09
About the Remote Control
Media
Remote Control
Button
(Alphabetical order)
STANDBY-ON
1
2
3
4
5
6
7
8
9
0
+10
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
9
• To select chapter or title
directly.
• To select track directly. (CD)
• To select folder/file directly.
(MP3)
AUDIO
ENTER
SUBTITLE
• To move the cursor and deter- • To move the cursor and determine its position.
mine its position.
ANGLE
REPEAT
CLEAR
A-B
PAUSE
+10
0
A-B
SKIP
ANGLE
PLAY
REV
FWD
STOP
SETUP
TOP MENU
MODE
ZOOM
AUDIO
MENU
ENTER
RETURN
CLEAR
SETUP
DISPLAY
REV
Installing the Batteries for the
Remote Control
Install batteries (AA x2) matching the
polarity indicated inside battery compartment of the remote control.
FWD
MENU
MODE
OPEN/CLOSE
1
2
3
PAUSE
Keep in mind the following when using
the remote control:
• Make sure that there are no obstacles
between the remote control and the
remote sensor on the unit.
• The maximum operable ranges from
the unit are as follows.
- Line of sight:
approx. 23 feet (7m)
- Either side of the center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
PLAY
• To repeat between your chosen point of A and B.
• To select camera angles on
a disc.
• To select audio language on
a disc.
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To display the current disc
mode.
• To search forward/backward
through a disc.
• To begin slow forward playback in the pause mode.
• To arrange the playing order
or play randomly.
• To set virtual surround on/off.
• To open or close the disc tray.
• To turn on the unit.
• To open or close the disc tray.
• To turn on the unit.
• To pause disc playback.
• To advance playback one
frame at a time.
• To begin disc playback.
• To turn on the unit.
PLAY
• To pause disc playback.
• To search chapter, title or
time.
• To begin disc playback.
• To turn on the unit.
• To play back a track or disc
repeatedly. (CD)
• To play back a file, folder or
disc repeatedly. (MP3)
• To return to the previous
operation in menu.
• To search tracks.
• To search time. (CD)
• To search folders. (MP3)
• To call up the setup menu.
• To call up the setup menu.
• To skip chapters or titles.
• To skip tracks. (CD)
• To skip folders or files. (MP3)
• To turn the unit on/off.
• To turn the unit on/off.
• To stop playback.
• To stop playback.
• To return to the previous
operation in menu.
P-SCAN
OPEN/CLOSE
• To search forward/backward
through a disc.
------
RETURN
SKIP
• To select “STEREO”, “L-ch” or
“R-ch”. (CD)
• To remove status number in
program input.
• To clear the numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To display the current disc
mode.
• To arrange the playing order
or play randomly.
• To set black level on/off.
• To set virtual surround on/off.
• To play back a chapter or title
repeatedly.
SETUP
------
• To call up the menu on a disc.
REPEAT
SEARCH
MODE
• To repeat between your chosen point of A and B.
STOP POWER
STANDBY-ON
STOP
Note:
• Do not mix alkaline and manganese
batteries.
• Do not mix old and new batteries.
• Always remove batteries from
remote control if they are dead or if
the remote control is not to be used
for an extended period of time. This
will prevent battery acid from leaking
into the battery compartment.
SUBTITLE
TOP MENU
ZOOM
• To select subtitles on a disc.
------
• To call up the top menu on
a disc.
------
• To magnify part of a picture.
(2x / 3x / 4x / 1/2x)
------
–8–
E6KPTUD_DP100HH8 A.indd 8
EN
2008/01/08 14:13:10
DVD FUNCTIONS
Please note : most instructions in this manual refer to remote control use.
Playback
Lights up when power is on.
Before:
Turn on the TV, amplifier and any other
devices which are connected to this unit.
Make sure the TV and audio receiver are
set to the correct channel.
P-SCAN
OPEN/CLOSE
PLAY
STOP POWER
2
⇒on page 10
)
2
STANDBY-ON
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
9
0
+10
AUDIO
1 Press [STANDBY-ON] to turn on
this unit.
SUBTITLE
ANGLE
2 Press [OPEN / CLOSE A] and
insert a disc with label facing up.
3 Press [PLAY B] to start playback.
4 Press [STOP C] to stop playback.
REPEAT
A-B
3
4
CLEAR
SKIP
PAUSE
PLAY
REV
FWD
STOP
4 1
2 3
Note:
• When you play back a CD-RW/-R with MP3
files, details on page 10.
• A “ ” may appear at the top-right on the TV
screen when the operation is prohibited by the
disc or this unit.
• Some DVD may start playback from title 2 or 3 due to
specific programs.
• During the playback of a 2-layered disc, pictures may
stop for a moment. This happens while the 1st layer is
being switched to the 2nd layer. This is not a malfunction.
• You can change the on-screen language in “PLAYER
MENU” setting. (Refer to page 14.)
Disc Menu
Fast Forward / Reverse Search
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Use [FWD g] or [REV h] repeatedly
during playback to select the required
forward or reverse speed.
To continue playback, press [PLAY B].
Calling Up a Menu Screen during Playback
Note:
E1
• Fast forward or reverse search speed is different
depending on the disc. Approximate speed is 1(2x), 2(4x),
3(8x), 4(16x) and 5(32x).
• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.
DVD FUNCTIONS
(
2
1
Slow Forward Search
Note:
• Menu operations may vary depending on the disc. Refer
to the manual accompanying the disc for more details.
Press [FWD g] repeatedly in the pause
mode to select the required forward speed.
To continue playback, press [PLAY B].
Resume Playback
Press [STOP C] during playback. Resume icon
will appear at the top-left on the TV screen.
Press [PLAY B], playback will resume from
the point at which playback was stopped.
Note:
R.STOP
Note:
• To cancel resume, press [STOP C] one more time in the
stop mode.
• For MP3, playback will resume from where you stopped (if
the power has been turned off, the playback will start from
the beginning of the track).
• The resume playback information stays on even when the
power is turned off, as long as the disc stays in the unit.
• Slow forward speed is different depending on the disc.
Approximate speed is 1(1/32), 2(1/16), 3(1/8), 4(1/4) and
5(1/2).
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if
pictures in the slow playback mode are blurred. (Refer to
pages 14-15.)
• The reverse of slow playback is not available.
Zoom
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: 2x, 3x, 4x, 1/2x or off.
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
x2
x3
x4
x1/2
PAUSE
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
Note:
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if
pictures in the pause mode are blurred. (Refer to pages
14-15.)
2) Use [K / L / s / B] to slide the zoomed picture across
the screen.
3) To exit zoom function, press [ZOOM] repeatedly to select
OFF.
Note:
• Zooming function does not work while the disc menu is
displayed.
• Some part of the picture may not be zoomed depending
on the disc or playback status.
–9–
E6KPTUD_DP100HH8 A.indd 9
1
EN
2008/01/08 14:13:14
MP3 Playback
MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the
computer and play back the files on this unit.
Note:
• Some selections may take a while to
be recognized.
• Folders are known as groups; files are
known as tracks.
• MP3 files are accompanied by 3 icon.
• Folders are accompanied by
icon.
• Refer to “On-Screen Display” on
page 11 for more details.
• If you record data over 20 times, it may
not be played back correctly.
This unit recommends the files recorded
under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz.
• Constant bit rate: 32kbps ~ 320kbps.
Insert a CD-RW/-R with MP3 files, then the file list will automatically appear on the TV
screen.
1
Select the desired folder from the list
on the left side in the file list.
004/027
001/013
ENTER
00:00:36
2
Select the desired file from the list on
the right side in the file list.
001/027
OFF
1.
2.
3.
4.
5.
6.
7.
8.
folder1
folder2
folder3
folder4
folder5
folder6
folder7
folder8
3
3
3
3
3
3
3
1.
2.
3.
4.
5.
6.
7.
8.
001/007
ENTER
file name1
3
file name1
file name2
file name3
file name4
file name5
file name6
file name7
file name8
ENTER
00:00:12
OFF
file name11
1.
2.
3.
4.
5.
6.
7.
8.
folder1
folder2
folder3
folder4
folder5
folder6
folder7
folder8
3
3
3
3
3
3
3
1.
2.
3.
4.
5.
6.
7.
file name11
file name12
file name13
file name14
file name15
file name16
file name17
3
ENTER
or
or
Press [ENTER]
or [PLAY B] .
PLAY
PLAY
Refer to “Resume Playback” on
page 9.
STOP
Search Functions
Using Track Search
Using Title / Chapter Search
DVD FUNCTIONS
Using [SEARCH MODE]
1
--/26
SEARCH
MODE
00:00:19
OFF
Using [SEARCH MODE]
1
SEARCH
MODE
--/24
001/002
00:00:30
Using Time Search
1
PLAY
03/24
SEARCH
MODE
e.g.) CD
2
3
2
3
4
5
6
7
8
9
0
+10
Press [ENTER].
00:00:19
OFF
Press [SEARCH MODE] once for
the title search.
For the chapter search, press
cursor [B] to highlight .
ENTER
• To play back a double-digit track, press
the track number directly (e.g. for track
14, press [1], [4] and [ENTER]).
• To play back a triple-digit track, press
the track number directly for MP3.
(e.g. for track 114, press [1], [1], [4]
and [ENTER]).
Using [SKIP H , G]
1 PLAY
Current Track
SKIP
OFF
e.g.) DVD
Press cursor [B]
to highlight .
CD: once
DVD: twice
ENTER
ENTER
--/26
- -:- -:- -
or
Enter the desired track number
within 5 seconds.
1
001/002
OFF
TR 1 TR 2 TR 3 TR 4
SKIP
SKIP
2
3
2
Enter the desired title or chapter
number within 5 seconds.
1
2
3
4
5
6
7
8
9
0
+10
Enter the desired time within 5
seconds.
1
2
3
4
5
6
7
8
9
03/24
001/002
- -:- -:- -
OFF
0
03/24
---/002
00:00:32
e.g.) DVD
OFF
3
Press [ENTER].
Press [ENTER].
ENTER
ENTER
Note:
Using [SKIP H , G]
1
PLAY
Current Chapter
SKIP
CH 1 CH 2 CH 3 CH 4
SKIP
SKIP
• To play time 0:15:00, press [1], [5],
[0], [0] of [the Number buttons].
• Press [CLEAR] to erase the
incorrect input at step 2.
• For DVD and audio CD, time search
is not available for programmed or
random playback.
Note:
• For audio CD, track search is not
available for programmed or random
playback.
Note:
• Depending on the disc being played
back, this function can also be performed
by directly entering the desired chapter
number with [the Number buttons].
Refer to the manual accompanying the
disc.
• For DVD, title/chapter search is not available for programmed or random playback.
– 10 –
E6KPTUD_DP100HH8 A.indd 10
EN
2008/01/19 14:26:18
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
03/24
001/002
00:00:40
OFF
TR(Track):
current track number /
total tracks
current repeat setting
1
01/26
00:00:11
OFF
elapsed time of the current track
current repeat setting
DISPLAY
2
001/002 00:00:19 - 00:01:11
NORMAL
DISPLAY
C(Chapter):
current chapter number /
total chapters
CH(Chapter):
current chapter number /
total chapters
remaining time of the
current chapter
TR(Track):
current track number /
total tracks
2
01/26
00:00:12 - 00:03:20
NORMAL
current play mode setting
current play mode setting
DISPLAY
3
DISPLAY
elapsed time of the
current chapter
03/24
00:00:20 - 00:01:09
NORMAL
TT(Title):
current title number / total
titles
remaining time of the
current title
3
elapsed time of the current track
01/26
00:00:14 - 01:11:28
NORMAL
elapsed time of the
current title
elapsed time of entire disc
DISPLAY
4
ALL:
current track number / total
tracks
remaining time of the
entire disc
current play mode setting
current play mode setting
DISPLAY
remaining time of the
current track
4
Note:
DVD FUNCTIONS
1
T(Title):
current title number / total
titles
elapsed time of the
current title
current folder number /
total folders
current file number / total
files in the current folder
• Some DVD will not allow you to set chapter playback
correctly.
elapsed time of the
current file
current repeat setting
1
004/027
001/013
00:00:36
OFF
file name1
1. folder1
2. folder2
3. folder3
3
3
3
1. file name1
2. file name2
3. file name3
DISPLAY
TR(Track):
current file number / total
files in the current folder
elapsed time of the
current file
remaining time of the
current file
current play mode setting
2
001/013 00:00:43 - 00:03:36
NORMAL
file name1
1. folder1
2. folder2
3. folder3
3
3
3
1. file name1
2. file name2
3. file name3
DISPLAY
3
file name1
1.
2.
3.
4
– 11 –
E6KPTUD_DP100HH8 A.indd 11
folder1
folder2
folder3
f ld 4
3
3
3
3
1.
2.
3.
4
file name1
file name2
file name3
fil
4
EN
2008/01/08 14:13:23
Repeat / Random / Programmed Playback
Repeat Playback
Repeat A-B Playback
Repeat function is available only during
playback.
Programmed Playback
You may determine the order in which
chapters or tracks will play back.
1
PLAY
1
1
Press [MODE] once during stop
mode.
A-
PLAY
A-B
CHAPTER
REPEAT
2
(repeat off)
CHAPTER (current chapter repeat)
TITLE
DVD FUNCTIONS
OFF
TRACK
ALL
(current title repeat)
(repeat off)
(current track repeat)
A-B
TRACK
(current file repeat)
Note:
• To exit the sequence, press [A-B]
so that “OFF” appears.
• To cancel point A, press [CLEAR] at
step 1.
• This function does not work in the
other repeat modes.
DVD-PROGRAM
(current folder repeat)
ALL
(entire disc repeat)
1
3
4
5
6
7
8
9
0
+10
Total: 3
TITLE
2
02
007
--
---
--
---
--
---
05
005
--
---
--
---
--
---
01
002
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
• Up to 20 chapters or tracks can
be ordered.
• Enter the desired number with
[the Number buttons].
DVD: title and chapter number
CD: track number
MP3: folder and file number
Press [MODE] once during stop
mode.
3
NORMAL
MAX:
CHAPTER PLAY ALL CLEAR
e.g.) DVD
RANDOM
PROGRAM
• During playback, press [MODE].
CD/MP3: twice
DVD:
three times
2
Select “RANDOM”.
Then press [ENTER].
ENTER
ENTER
Random playback will start.
Note:
• During random playback, you cannot
go back to the previous track, using
[SKIP G] allows you to search
chapters or tracks randomly.
• During DVD random playback, you
can play back chapters in the current title randomly.
• Some DVD will not allow you to set
random playback.
– 12 –
E6KPTUD_DP100HH8 A.indd 12
2
Select “PLAY”,
then press [ENTER].
ENTER
Note:
• Repeat setting (except “ALL”) will
be cleared when moving to another
title, chapter, track/file or folder.
• This function is not available with
some discs or during repeat A-B
playback.
1
Random Playback
MODE
GROUP
ENTER
ENTER
This function shuffles the playing
order of chapters or tracks instead
of playback in the sequence.
(repeat off)
PROGRAM
Select “PROGRAM”.
Then press [ENTER].
at your desired ending point (B)
• Point B should be in the same title
or track as point A.
(entire disc repeat)
OFF
RANDOM
• During playback, press [MODE].
CD/MP3: twice
DVD:
three times
A-B
2
OFF
NORMAL
at your desired starting point (A)
e.g.) DVD
Each time you press [REPEAT], repeat
function changes as example below.
MODE
Note:
• To erase all program at once, select
“ALL CLEAR’’ and press [ENTER] or
press [CLEAR] at step 2.
• If the title, chapter, track number is
incorrect, the programmed number
you entered will be skipped during
programmed playback.
• While a program is being played back,
[STOP C] works as follows;
Press [STOP C] and [PLAY B] next,
so that the programmed playback
restarts.
Press [STOP C] twice and [PLAY B]
next, so that playback restarts from
the first track in the original order.
However, your programmed playback
can be restarted when you follow the
above steps. (Your programs are still
stored until either the disc is removed
or power is turned off.)
• Some DVD will not allow you to set
programmed playback.
• During programmed playback, you
cannot setup “
TITLE’’ (DVD), “
GROUP’’ (MP3).
EN
2008/01/08 14:13:25
Special Settings
Subtitle Language
Each time you press [AUDIO], audio
language changes as example below.
This unit allows you to select a subtitle
language (if available) during DVD
playback.
ENG
(English audio)
SPA
(Spanish audio)
FRE
(French audio)
Stereo Sound Mode
This unit allows you to select a sound
mode during CD playback.
1
1
PLAY
PLAY
...
STEREO
1. ENG/6
AUDIO
Note:
SUBTITLE
Each time you press [SUBTITLE],
subtitle language changes as example
below.
OFF
(no subtitles)
ENG
(English subtitles)
• Some discs will only allow you to change the
audio setting from the disc menu. Refer to the
manual accompanying the discs for details.
• If your language is not shown after pressing
[AUDIO] several times, the disc may not have
that language. However, some discs allow
audio language setting on the disc menu.
(Operation varies depending on the disc, so
refer to the manual along with the disc.)
Each time you press [AUDIO], sound
mode changes as example below.
STEREO (right and left channels
are active)
L-ch
(left channel is active)
R-ch
(right channel is active)
Camera Angles
(French subtitles)
To set subtitle ON/OFF
1
PLAY
1. ENG/6
SUBTITLE
Virtual Surround
Some DVD may contain
scenes which have been
shot simultaneously from
various angles. You can
change the camera angle if
appears on the screen. If the “ANGLE
ICON” setting is “OFF” in “OTHERS”
menu,
will not appear. (Refer to
pages 14-16.)
You can enjoy stereophonic virtual world
on your existing 2 channel stereo system.
1
PLAY
OFF
MODE
1
2
PLAY
ENTER
OFF
Press twice.
(once for CD and MP3)
1/8
ANGLE
2
Note:
• If your language is not shown after
pressing [SUBTITLE] several times,
the disc may not have that language.
However, some discs allow subtitle
language setting on the disc menu.
(Operation varies depending on the
disc, so refer to the manual along with
the disc.)
• When “ ” appears on the TV screen,
it means no subtitle is recorded on the
scene.
• Some discs will only allow you to change
the subtitle from the disc menu. Refer to
the manual accompanying the discs for
details.
Each time you press [ANGLE], camera
angle changes.
Adjust the black level to make the dark
areas of the TV picture brighter.
1
PLAY
ON
MODE
1. ENG Dolby D 5.1ch 48k/3
AUDIO
ROCK
3D: sound mode suitable for setting
stereophonic audio.
JAZZ: sound mode suitable for jazz
music
ROCK: sound mode suitable for rock music
POP: sound mode suitable for pop music
CLASSIC: sound mode suitable for
classic music
OFF: no effects (original sound)
RETURN
2
ENTER
OFF
ON: makes the dark areas brighter.
OFF: shows the original picture as recorded.
3
RETURN
– 13 –
E6KPTUD_DP100HH8 A.indd 13
ENTER
3
1
PLAY
Using [s / B], you can select the
desired sound mode.
Black Level Setting
Audio Language
This unit allows you to select an audio
language (if multiple languages are
available on disc) during DVD playback.
DVD FUNCTIONS
...
FRE
Note:
• Virtual surround is available only
when the DVD player is connected
to a TV or stereo using the red and
white AUDIO OUT jacks on the DVD
player. Also, select the “SETUP”
menu to use Dolby Digital
connection (COAXIAL), and setting in
PCM mode.
EN
2008/01/19 14:26:22
DVD Setting
You can change the settings of the unit.
1
2
Press [SETUP].
Select the desired item.
SETUP
ENTER
ENTER
<SETUP MENU>
LANGUAGE
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
LANGUAGE menu
TV ASPECT
STILL MODE
PROGRESSIVE
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
DVD FUNCTIONS
page 14
A
DISPLAY menu
A
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
page 15
AUDIO menu
PARENTAL menu
PARENTAL_PASSWORD
AUDIO_DRC
DISPLAY_TV ASPECT
LANGUAGE_AUDIO
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
DRC
DOWN SAMPLING
DOLBY DIGITAL
page 15
B
PASSWORD
ON
OFF
ANGLE ICON
AUTO POWER OFF
D
INITIALIZE
ON
OFF
page 16
INITIALIZE menu
INITIALIZE_INITIALIZE
OTHERS_ANGLE ICON
NO
YES
page 16
C
OTHERS menu
YES
page 17
E
F
LANGUAGE Setting
Follow steps 1 to 2 above.
3
4
Select the desired item.
Select the desired language.
ENTER
5
To exit the menu
SETUP
ENTER
ENTER
ENTER
Note:
LANGUAGE menu
AUDIO: ∗1 ∗2
(Default: ORIGINAL)
LANGUAGE_AUDIO
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
Sets the audio
language.
SUBTITLE: ∗1 ∗2
(Default: OFF)
Sets the subtitle
language.
DISC MENU: ∗1
(Default: ENGLISH)
Sets the language in
DVD menu.
PLAYER MENU
(Default: ENGLISH)
Sets the language for
the on-screen display.
LANGUAGE_AUDIO
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
LANGUAGE_SUBTITLE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
OFF
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
LANGUAGE_DISC MENU
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
DUTCH
OTHERS
LANGUAGE_PLAYER MENU
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
– 14 –
E6KPTUD_DP100HH8 A.indd 14
ORIGINAL
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
SWEDISH
OTHERS
ENGLISH
FRANÇAIS
ESPAÑOL
∗1
• Language options are not
available with some discs.
• If “OTHERS” is selected in the
“AUDIO”, “SUBTITLE” or “DISC
MENU” screen, select the desired language using
[K / L / s / B]. Press [ENTER].
LANGUAGE_AUDIO
DUTCH
RUSSIAN
CHINESE
JAPANESE
KOREAN
DANISH
FINNISH
NORWEGIAN
ICELANDIC
ROMANIAN
TURKISH
GREEK
IRISH
PORTUGUESE
POLISH
CZECH
HUNGARIAN
• Only the languages supported
by the disc can be selected.
∗2
• “LANGUAGE” setting for
“AUDIO” and “SUBTITLE” are
not available with some discs.
Then press [AUDIO] and
[SUBTITLE]. Details are on
page 13.
EN
2008/01/08 14:13:38
B
DISPLAY Setting
You can change the display functions. Follow steps 1 to 2 on page 14.
3
Select the desired item.
4
ENTER
TV ASPECT: (Default: 4:3 LETTER BOX)
See note on the left.
Select the
desired
setting.
DISPLAY_TV ASPECT
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
5
ENTER
To exit
“TV ASPECT”
or “STILL
MODE” menu
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
ENTER
SETUP
ENTER
DISPLAY menu
STILL MODE: (Default: AUTO)
See note on the left.
DISPLAY_TV ASPECT
TV ASPECT
STILL MODE
PROGRESSIVE
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
Select the
desired
setting.
DISPLAY_STILL MODE
TV ASPECT
STILL MODE
PROGRESSIVE
AUTO
FIELD
FRAME
AUTO
FIELD
FRAME
To complete
“PROGRESSIVE”
setting
ENTER
ENTER
ENTER
ENTER
PROGRESSIVE: (Default: OFF)
See note on the right.
TV ASPECT:
• Select “4:3 LETTER BOX”, so that
black bars may appear on the top and
bottom of the screen.
• Select “4:3 PAN & SCAN” for a full
height picture with both sides adjusted.
• Select “16:9 WIDE” if a wide-screen TV
is connected to this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, it automatically
selects the best resolution setting
(“FRAME” or “FIELD”) based on the
data characteristics of the pictures.
(default)
• If you select “FIELD”, the picture in the
still mode will be stabilized.
• If you select “FRAME”, the picture in
the still mode will be highly defined.
• An individual picture on TV screen is
called a “frame”, which consists of two
separate images called as “field”.
• Some pictures may be blurred if you
select “AUTO” in the still mode due to
their date characteristics.
C
Select
“ON”.
DISPLAY_PROGRESSIVE
TV ASPECT
STILL MODE
PROGRESSIVE
OFF
ON
SETUP
OFF
ON
ENTER
Note:
PROGRESSIVE:
• You can set
“PROGRESSIVE” to
“OFF” in “DISPLAY”
menu or press and
hold [PLAY B] on the
front of the unit for
more than 5 seconds
during playback, so
that the P- SCAN
indicator on the front
panel turns off.
• When “PROGRESSIVE”
is “ON”, video signals
from the unit’s VIDEO
OUT and S-VIDEO OUT
jacks will be distorted or
not be output at all.
ENTER
Select
“Yes”.
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
If there is no
picture or you
do not press
any buttons for
15 seconds,
“PROGRESSIVE”
will switch to
“OFF” and it will
exit the “SETUP”
menu.
A cti vate P rogressi ve?
SELECT: K / L
ENTER
NO
YES
SET:ENTER
ENTER
Select
“Yes”.
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
ENTER
NO
YES
SELECT: K / L
SET:ENTER
DVD FUNCTIONS
Note:
AUDIO Setting
Choose the appropriate audio settings for your device. It only affects during the playback of DVD. Follow steps 1 to 2 on
page 14.
3
Select the desired item.
ENTER
4
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
Select the
AUDIO_DRC
desired
ENTER
DRC
ON
ON
setting.
DOWN SAMPLING
OFF
OFF
DOLBY DIGITAL
ENTER
AUDIO menu
AUDIO_DRC
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
OFF
ENTER
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
Select the
desired
AUDIO_DOWN SAMPLING
DRC
ON
ON
setting.
DOWN SAMPLING
OFF
OFF
ENTER
DOLBY DIGITAL
ENTER
ENTER
5
To exit the menu
SETUP
Note:
DRC:
• This function is
available only on the
discs which are recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing back
disc with copyright
protection, the sound
will be down sampled
at 48kHz, even if you
set to “OFF”.
DOLBY DIGITAL: (Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs a Dolby Digital signals.
• PCM: convert the Dolby Digital into PCM (2 channel).
AUDIO_DOLBY DIGITAL
Select the
DRC
BITSTREAM
BITSTREAM
desired
ENTER
DOWN SAMPLING
PCM
PCM
setting.
DOLBY DIGITAL
ENTER
– 15 –
E6KPTUD_DP100HH8 A.indd 15
ENTER
EN
2008/01/08 14:13:40
D
PARENTAL Setting
Parental control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)
This feature prevents your children from viewing inappropriate materials.
Parental Levels
Parental level allows you to set the rating levels of your DVD. Playback will stop if the ratings exceed the levels you set.
Follow steps 1 to 2 on page 14.
3
Press [ENTER],
and then select “YES”.
ENTER
ENTER
4
Enter your desired
4-digit password.
ENTER
If the password has not been
set yet.
1
2
3
4
5
6
7
8
9
ENTER
5
Select “LEVEL”.
ENTER
6
Select the desired
level, and press
[ENTER].
ENTER
ENTER
0
PASSWORD
PARENTAL menu
NO
YES
Enter password
PASSWORD
LEVEL
CHANGE
----
PASSWORD
LEVEL
CHANGE
8 [ADULT]
PARENTAL_PASSWORD
PASSWORD
NO
YES
TIPS FOR LEVELS
DVD software of any grades (adult/
general/children) can be played back.
• 7 [NC-17]:
no one under 17 admitted
• 6 [R]:
restricted; under 17 requires
accompanying parent or adult guardian
• 5 [PGR]:
parental guidance recommended
• 4 [PG13]:
unsuitable for children under 13
• 3 [PG]:
parental guidance suggested
• 2 [G]:
general audience
• 1 [KID SAFE]: suitable for children
Enter a new
password again.
If the password has been
set already, enter the current
4-digit password.
PASSWORD
PARENTAL menu
• 8 [ADULT]:
NO
YES
Re-enter password
----
PARENTAL_CHANGE
DVD FUNCTIONS
PASSWORD
LEVEL
CHANGE
Enter password
----
If you do not need
parental lock, choose
“NO”. Press [ENTER].
7
To exit the menu
SETUP
Note:
• For DVD, the resume information will be cleared if you change the
parental level when the resume information is on.
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to 2 on page 14.
6
Select “CHANGE” at step
5 above.
ENTER
PARENTAL menu
7
Enter your new 4digit password again.
1
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
0
PARENTAL_CHANGE
PASSWORD
LEVEL
CHANGE
PASSWORD
LEVEL
CHANGE
----
Re-enter password
ENTER
9
To exit the menu
SETUP
Note:
0
PASSWORD
LEVEL
CHANGE
Enter new password
E
8
Enter your desired
4-digit password.
----
• Record the password in
case you forget it.
• If you forget the password,
press [4], [7], [3], [7] at step
3 above, then enter your new
password. Password will be
cleared and parental levels
will be set to “8 [ADULT]”.
OTHERS Setting
You can change the other functions. Follow steps 1 to 2 on page 14.
3
Select the desired item.
ENTER
4
5
ANGLE ICON: (Default: ON)
Set to “ON” to display
when
multiple camera angles are available
during DVD playback.
ANGLE ICON
AUTO POWER OFF
ON
OFF
ENTER
OTHERS menu
OTHERS_ANGLE ICON
ANGLE ICON
AUTO POWER OFF
ON
OFF
ON
OFF
AUTO POWER OFF: (Default: ON)
Set to “ON” to turn this unit off
automatically after 30 minutes of no
use.
ANGLE ICON
AUTO POWER OFF
ON
OFF
ON
OFF
Select the
desired
setting.
To exit the menu
SETUP
ENTER
ENTER
Select the
desired
setting.
ENTER
ENTER
ENTER
– 16 –
E6KPTUD_DP100HH8 A.indd 16
EN
2008/01/08 14:13:44
F
1
Reset to the Default Setting (Except for PARENTAL Setting)
Press [SETUP].
2
3
Select “INITIALIZE”.
SETUP
ENTER
STOP
ENTER
Select the desired
PLAYER MENU
Language, using [the
Number buttons].
<SETUP MENU>
Press
twice.
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
INITIALIZE_INITIALIZE
INITIALIZE
Note:
• When you do not
wish to initialize,
press [SETUP] to
exit the menu at
step 2.
SELECT MENU LANGUAGE
1 ENGLISH
YES
2 FRENCH
3 SPANISH
INFORMATION
Troubleshooting Guide
Problem
Corrective action
No power
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
–Check if the TV is switched on.
–Check the video connection.
–Check the audio/video cable connections to the TV.
(Refer to page 6.)
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the unit directly to the TV.
–Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive
scan and you are using the component video connections between the unit and the TV. Disable
progressive scan for all other connections. (Refer to page 6.)
–Connect this unit directly to the TV.
–Make sure the disc is compatible with the unit.
–Adjust the volume.
–Check that the speakers are connected correctly.
–Check the digital connections.
–Check if the audio format of the selected audio language matches your receiver capabilities.
–This unit does not support DTS audio.
This is not a malfunction.
No sound or picture
Distorted picture
Completely distorted picture or
black/white picture with DVD
No sound or distorted sound
No audio at digital output
No DTS audio is output.
Picture freezes momentarily during
playback.
–Check the disc for fingerprints/dirty and clean with a soft cloth wiping from center to edge.
Disc cannot be played back.
–Clean the disc.
–Ensure the disc is inserted in correct direction.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays back on this unit.
–Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No return to start-up screen when
disc is removed.
–Reset the unit by switching off the unit, then on again.
The unit does not respond to
the remote control.
–Aim the remote control directly at the sensor on the front panel.
–Reduce the distance to the unit.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn up the
volume. If you hear some signal sound from the radio by pressing buttons on the remote control,
the remote control is working.
–Press and hold any button on remote control toward a digital camera. The remote control is
working if you confirm infrared light through the digital camera.
Buttons do not work or the unit stops
responding.
The unit does not respond to some
operating commands during playback.
The unit cannot read CD / DVD.
Angle does not switch.
Playback does not start
when the title is selected.
The password for rating level
has been forgotten.
INFORMATION
If the unit does not perform properly when operated as instructed in this owner’s manual, refer to the following.
–To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
–Operations may not be permitted by the disc. Refer to the instructions of the disc.
–Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for
repair.
–The angle cannot be switched for DVD which do not contain multiple angles. In some cases
multiple angles are only recorded for specific scenes.
–Check the “PARENTAL” setting.
–Enter the default password “4737”, then your forgotten password will be cleared.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner’s
manual for more details on correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
– 17 –
E6KPTUD_DP100HH8 A.indd 17
EN
2008/01/08 14:13:48
Specifications
Output signal format :
NTSC color
Operating temperature :
41°F (5°C) to 104°F (40°C)
Power source :
Dimensions :
120V AC +/- 10%, 60Hz +/- 0.5%
Power consumption :
10W (standby : 0.9W)
W : 8.3”
H : 2.0”
D : 9.7”
(210mm)
(50mm)
(245mm)
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between
languages, the default language will be
English.
Weight :
Approx 1.8lbs. (0.8kg)
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in
the event of defect in materials or workmanship as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective
parts without charge for one (1) year from the date of
original retail purchase. Certain parts are excluded from
this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a
period of ninety (90) days from the date of original retail
purchase.
INFORMATION
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A
purchase receipt or other proof of original retail purchase will be
required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on
the product are altered, replaced, defaced, missing or if service
was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the
United States.
This product is produced for home use and this warranty only covers
failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment,
or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident,
misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental
or office use of this product or damage which results from fire, flood,
lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS,
ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO
OR FLOOR MODELS.FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE IN-
ABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI,
ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY
INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN
AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID
WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY
PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH
THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY
DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED
REPAIRS:
To obtain warranty service, you must take the product, or
deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any
AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers
without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for
general service inquiries, please contact us at:
– 18 –
E6KPTUD_DP100HH8 A.indd 18
FUNAI CORPORATION
Customer Service
Tel :1-800-317-6062
http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501
EN
2008/01/08 14:13:49
Español
1
4
Conexiones
Si su televisor tiene entradas de
AUDIO/VIDEO vea la sección
“Connection to a TV” en la página 6 en
el manual de manejo. En caso
contrario, vea la sección “Connecting
to RF Modulator (Not Supplied)” en
la página del frente en el manual de
manejo.
Reproducción
Antes.
¡Encienda el televisor,
amplificador y otros equipos
conectados a esta unidad.
Asegúrese
que el
1
televisor y el
sintonizador
de audio
están en el
canal
correcto.
3
STANDBY-ON
1
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
1
AUDIO
Instalación de las pilas en
el control remoto
1
2
ANGLE
REPEAT
CLEAR
A-B
PAUSE
3
9
+10
SKIP
PLAY
REV
FWD
STOP
5
3
STANDBY-ON
2
Ponga un disco
con la etiqueta
hacia arriba.
4
Para parar la
reproducción
OPEN/CLOSE
SUBTITLE
0
2
Para abrir o
cerrar la bandeja
del disco
Para empezar la
reproducción
4
STOP
PLAY
Control remoto
Disco
Botón
(Orden alfabético)
3
1
1
2
3
4
5
6
7
8
9
0
+10
Para cambiar el idioma en
la pantalla
ENTER
Confirme que ha seleccionado
“LANGUAGE”.
A-B
SETUP
STANDBY-ON
STOP
✄
• Para seleccionar directamente la canción.
(CD)
• Para seleccionar directamente el grupo/
canción. (MP3)
• Para mover el cursor y determinar la
posición.
• Para mover el cursor y determinar la
posición.
• Para repetir entre su punto A y B
seleccionado.
• Para repetir entre su punto A y B
seleccionado.
ANGLE
• Para seleccionar los ángulos de la
cámara en un disco.
AUDIO
• Para seleccionar idiomas de audio en un
disco.
• Para seleccionar “ESTÉREO”, “L-ch” o
“R-ch”. (CD)
• Para eliminar el Nº de estado en la
entrada de programa.
• Para borrar los números mal entrados.
• Para borrar el punto para la repetición
A-B.
• Para eliminar el Nº de estado en la
entrada de programa.
• Para borrar los números mal entrados.
• Para borrar el punto para la repetición
A-B.
• Para mostrar el modo de disco actual.
• Para mostrar el modo de disco actual.
• Para buscar en avance/retroceso por un disco.
• Para empezar la reproducción en avance
lento durante el modo de pausa.
• Para buscar en avance/retroceso por un
disco.
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
• Para seleccionar directamente el capítulo
o título.
CLEAR
------
DISPLAY
ENTER
REV
Seleccione “PLAYER MENU”.
MENU
• Para llamar el menú en un disco.
MODE
ENTER
LANGUAGE_PLAYER MENU
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
OPEN/CLOSE
PAUSE
ENTER
PLAY
3
Seleccione el idioma deseado para
las indicaciones en la pantalla.
LANGUAGE_PLAYER MENU
ENTER
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
• Para disponer el orden de reproducción o
la reproducción aleatoria.
• Para activar/desactivar el ambiental
virtual.
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
• Para abrir o cerrar la bandeja del disco.
• Para encender la unidad.
• Para hacer una pausa en la reproducción.
• Para avanzar la reproducción un cuadro cada vez.
• Para hacer una pausa en la reproducción
del disco.
• Para empezar la reproducción del disco.
• Para encender la unidad.
• Para empezar la reproducción del disco.
• Para encender la unidad.
• Para reproducir repetidamente una
canción o disco. (CD)
• Para reproducir repetidamente una
cansión, grupo o disco. (MP3)
• Para volver a la operación anterior en el
menú.
• Para buscar una canción.
• Para buscar el tiempo. (CD)
• Para buscar los grupos. (MP3)
REPEAT
• Para reproducir repetidamente un
capítulo o título.
RETURN
• Para volver a la operación anterior en el
menú.
SEARCH
MODE
------
• Para disponer el orden de reproducción o
la reproducción aleatoria.
• Para activar/desactivar el nivel del negro.
• Para activar/desactivar el ambiental virtual.
• Para buscar un capítulo, título o tiempo.
Español
2
FWD
SETUP
ENTER
SKIP
4
• Para llamar el menú de ajustes de DVD.
• Para llamar el menú de ajustes de DVD.
• Para saltar capítulos o titulo.
• Para saltar canciones. (CD)
• Para saltar los grupos o canciones. (MP3)
• Para encender o apagar la unidad.
• Para encender o apagar la unidad.
• Para parar la reproducción.
• Para parar la reproducción.
STANDBY-ON
Para salir del menú
SETUP
STOP
SUBTITLE
• Para seleccionar subtítulos en un disco.
------
• Para llamar el menú inicial en un disco.
------
• Para ampliar la imagen de vídeo en DVD.
(2x / 3x / 4x / 1/2x)
------
TOP MENU
ZOOM
– 19 –
E6KPTUD_DP100HH8 A.indd 19
ES
2008/01/11 17:45:16
Quick Use Guide
1
4
Connections
If your TV has AUDIO/VIDEO input
jacks, see the section “Connection to a
TV” on page 6 of the owner’s manual.
If not, see the section “Connecting to
RF Modulator (Not Supplied)” on the
front page of the owner’s manual.
Playback
Before:
Turn on the TV, amplifier
and any other devices which
are connected to this unit.
Make sure the
TV and audio
receiver are set 1
to the correct
channel.
STANDBY-ON
1
To open the disc
tray
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
1
AUDIO
2
Insert a disc with
label facing up.
OPEN/CLOSE
STANDBY-ON
SUBTITLE
2
Installing the Batteries for
the Remote Control
1
ANGLE
CLEAR
A-B
PAUSE
9
SKIP
PLAY
REV
3
FWD
STOP
5
3
+10
0
3
2
REPEAT
To start playback 4 To stop playback
4
STOP
PLAY
Remote Control
Media
Button
(Alphabetical order)
3
1
To Change the
On-Screen Language
1
2
3
4
5
6
7
8
9
0
+10
Confirm that “LANGUAGE” is selected.
ENTER
SETUP
STANDBY-ON
• To select chapter or title directly.
• To select track directly. (CD)
• To select folder/file directly. (MP3)
• To move the cursor and determine its
position.
• To move the cursor and determine its
position.
• To repeat between your chosen point of
A and B.
• To repeat between your chosen point of
A and B.
STOP
A-B
ANGLE
• To select camera angles on a disc.
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
AUDIO
• To remove status number in program
input.
• To clear the numbers entered incorrectly.
• To cancel the point for A-B repeat.
• To display the current disc mode.
• To display the current disc mode.
• To search forward/backward through
a disc.
• To begin slow forward playback in the
pause mode.
• To search forward/backward through
a disc.
• To select audio language on a disc.
CLEAR
ENTER
-----• To select “STEREO”, “L-ch” or “R-ch”.
(CD)
• To remove status number in program
input.
• To clear the numbers entered incorrectly.
• To cancel the point for A-B repeat.
DISPLAY
2
Select “PLAYER MENU”.
REV
FWD
✄
LANGUAGE
MENU
ENTER
• To call up the menu on a disc.
LANGUAGE_PLAYER MENU
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
MODE
------
• To arrange the playing order or play
randomly.
• To set black level on/off.
• To set virtual surround on/off.
• To arrange the playing order or play
randomly.
• To set virtual surround on/off.
• To open or close the disc tray.
• To turn on the unit.
• To open or close the disc tray.
• To turn on the unit.
• To pause disc playback.
• To advance playback one frame at a time.
• To pause disc playback.
OPEN/CLOSE
ENTER
PAUSE
3
Select the desired language for the
on-screen language.
PLAY
• To begin disc playback.
• To turn on the unit.
REPEAT
• To play back a chapter or title repeatedly.
LANGUAGE_PLAYER MENU
ENTER
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
RETURN
SEARCH
MODE
ENTER
• To return to the previous operation in
menu.
• To search chapter, title or time.
SETUP
• To call up the setup menu.
• To call up the setup menu.
• To skip chapters or titles.
• To skip tracks. (CD)
• To skip folders or files. (MP3)
• To turn the unit on/off.
• To turn the unit on/off.
• To stop playback.
• To stop playback.
SKIP
4
To exit the menu
SETUP
• To begin disc playback.
• To turn on the unit.
• To play back a track or disc repeatedly.
(CD)
• To play back a file, folder or disc
repeatedly. (MP3)
• To return to the previous operation in
menu.
• To search tracks.
• To search time. (CD)
• To search folders. (MP3)
STANDBY-ON
STOP
SUBTITLE
• To select subtitles on a disc.
------
• To call up the top menu on a disc.
------
• To magnify part of a picture.
(2x / 3x / 4x / 1/2x)
------
TOP MENU
ZOOM
Printed in China
E6KPTUD_DP100HH8 A.indd 20
E6KPTUD
1VMN24994 ★★★★★
2008/01/11 17:45:21