Owner`s manual | FUNAI DV200MW8 DVD Player User Manual

Owner’s Manual
Please read before using this unit.
Precautions
Supplied Accessories
Remote control
(NB612UD/NB662UD)
with two AA batteries
Owner’s Manual
(1VMN23364)
Owner's Manual
TOLL FREE : 1-800-605-8610
or visit our Web site at
http://www.funai-corp.com
Table of Contents
Precautions
DVD Functions
Laser Safety ................................................................................. 2
■ IMPORTANT SAFEGUARDS ...................................................... 3
Location and Handling ................................................................. 4
Avoid the Hazards of Electrical Shock and Fire .......................... 4
Moisture Condensation Warning.................................................. 4
About Copyright ........................................................................... 4
Symbols Used in This Manual ..................................................... 4
Maintenance................................................................................. 4
■ About Video Cassettes and Discs ............................................ 5
Playable Video Cassettes ............................................................ 5
Playable Discs ............................................................................. 5
Unplayable Discs ......................................................................... 5
■ Playback ..................................................................................... 11
■ On-Screen Display..................................................................... 12
■ Search Functions ...................................................................... 13
Using Track Search .................................................................... 13
Using Title / Chapter Search....................................................... 13
Using Time Search ..................................................................... 13
Marker Setup .............................................................................. 13
■ Repeat / Random / Programmed Playback ............................. 14
Repeat Playback ......................................................................... 14
Repeat A-B Playback .................................................................. 14
Random Playback ....................................................................... 14
Programmed Playback ................................................................ 14
■ Special Settings ......................................................................... 15
Subtitle Language ....................................................................... 15
Audio Language .......................................................................... 15
Camera Angles ........................................................................... 15
Black Level Setting ..................................................................... 15
Stereo Sound Mode .................................................................... 15
Virtual Surround .......................................................................... 15
■ DVD Setup ................................................................................. 16
LANGUAGE Setting .................................................................... 16
DISPLAY Setting ......................................................................... 17
AUDIO Setting ............................................................................ 17
PARENTAL Setting ..................................................................... 18
OTHERS Settings ....................................................................... 18
Reset to the Default Setting (Except for PARENTAL Setting).... 19
Setup
■ Connections ................................................................................ 6
Connection to a TV ...................................................................... 6
Connection to an Audio System .................................................. 6
■ Preparation for Use .................................................................... 7
Front Panel Indicator Lights ......................................................... 7
Selecting DVD or VCP Operation ................................................ 7
Rear Terminals ............................................................................ 7
Turning on Unit for the First Time ................................................ 7
Remote Control ............................................................................ 8
Installing the Batteries for the Remote Control ............................ 8
VCP Functions
■ Playback ...................................................................................... 9
■ Other Operations ........................................................................ 9
Index Search ................................................................................ 9
Time Search ................................................................................. 9
Auto Repeat ................................................................................ 10
Information
Troubleshooting Guide ................................................................. 19
Specifications ................................................................................ 20
Language Code List ...................................................................... 20
LIMITED WARRANTY .................................................................... 20
Español........................................................................................... 21
Quick Use Guide............................................................................ 23
Basic TV Connection
DVD/VCP
(Back of this unit)
AUDIO OUT
Connect
L
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
AC
outlets
2
Plug in
L
DVD/VCP
S-VIDEO
OUT
COMPONENT
VIDEO OUT
Y
AUDIO OUT
ANT-IN
L
AUDIO IN
L
CB
COAXIAL
(Back of TV)
AUDIO IN
R
VIDEO OUT
R
VIDEO IN
R
R
From this unit
ANT-OUT
CR
AUDIO IN
L
VIDEO OUT
VIDEO IN
R
VIDEO IN
From TV
3
Please refer to “Connections” on page 6.
Setup
Audio/Video cables
(WPZ0102TM015 /
WPZ0102LTE01)
If you need additional operating assistance
after reading this Owner’s Manual, please call
Information DVD Functions VCP Functions
DV200MW8
INSTRUCCIONES EN
ESPAÑOL INCLUIDAS.
Español
DVD/CD Player with Video Cassette Player
Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
Precautions
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
The caution marking is located on the rear of the cabinet.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to
possible eye injury.
CAUTION:
CAUTION:
LOCATION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT
STARE INTO BEAM.
INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING - This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the manual.
The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with
your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special wastes.
Contact your council for details.
For Customer Use:
Read carefully the information located at the back of this unit and enter below the Model No. and the Serial No. Retain this
information for future reference.
Model No. ________________________
Serial No. ________________________
–2–
EN
1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.
6. Attachments - Do not use attachments not recommended
by the video product manufacturer as they may cause
hazards.
7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like.
8. Accessories - Do not place this video
product on an unstable cart, stand,
tripod, bracket, or table. The video
product may fall, causing serious injury
to a child or adult, and serious damage
to the appliance. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video
product. Any mounting of the appliance should follow the
manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer. An
appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to
overturn.
9. Ventilation - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation of
the video product and to protect it from overheating, and
these openings must not be blocked or covered.
The openings should never be blocked by placing the
video product on a bed, sofa, rug, or other similar surface.
This video product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's instructions
have been adhered to.
10. Power Sources - This video product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or
local power company. For products intended to operate
from battery power, or other sources, refer to the
operating instructions.
11. Grounding or Polarization - This video product is
equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug
will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
13. Lightning - For added protection for this video product
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet. This will prevent damage to the product due to
lightning and power-line surges.
14. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with
them might be fatal.
15. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
16. Object and Liquid Entry - Never push objects of any kind
into this video product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the video product.
17. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
18. Damage Requiring Service - Unplug this video product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by
following the operating instructions. Adjust only those
controls that are covered by the operating instructions
as an improper adjustment of other controls may result
in damage and will often require extensive work by a
qualified technician to restore the video product to its
normal operation.
e. If the video product has been dropped or damaged in
any way.
f. When the video product exhibits a distinct change in
performance this indicates a need for service.
19. Replacement Parts - When replacement parts are
required, be sure the service technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
20. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to
perform safety checks to determine that the video product
is in proper operating condition.
21. Heat - This video product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
–3–
EN
Precautions
IMPORTANT SAFEGUARDS
Maintenance
Location and Handling
Precautions
• Do not stand this unit up vertically. Install this unit in a
horizontal and stable position. Do not place anything directly
on top of this unit. Do not place this unit directly on top of
the TV.
• Depending on the TV, noise or disturbance of the picture
and/or sound may be generated if this unit is placed too
close to your TV. In this case, please ensure enough space
between your TV and this unit.
• Do not cover or place this unit in enclosed spaces to
prevent excessive temperature build up.
• Do not place this unit in direct sunlight, or near heat sources.
• Depending on the environment, the temperature of this unit
may increase slightly. This is not a malfunction.
• Keep this unit away from strong magnetic objects.
• Do not place any object containing water or other liquids on
this unit. In the event that liquid should enter the cabinet,
unplug this unit immediately and contact the retailer or an
Authorized Service Center immediately.
• Do not remove this unit cabinet. Touching parts inside the
cabinet could result in electric shock and/or damage to this
unit. For service and adjustment inside the cabinet, call a
qualified dealer or an Authorized Service Center.
• Be sure to remove disc and videotape and unplug the AC
power cord from the output before carrying this unit.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from
AC outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the power
cord immediately and take the unit to our Authorized
Service Center for servicing.
• Do not put your fingers or objects into the unit cassette
holder.
SERVICING
• Please refer to relevant topics on the “Troubleshooting
Guide” on page 19 before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call our
toll free customer support line found on the cover of this
manual to locate an Authorized Service Center.
CLEANING THE CABINET
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
CLEANING DISCS
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
CLEANING THE DISC LENS
• If this unit continues to perform improperly even after you
have referred to the relevant sections and to the
“Troubleshooting Guide” in this Owner’s Manual, the laser
optical pickup unit may be dirty. Consult your dealer or an
Authorized Service Center for inspection and cleaning of the
laser optical pickup unit.
DISC HANDLING
• When you handle a disc, hold it by its edge and try not to
touch the surface of the disc.
• Always store the disc in its protective case when not in use.
AUTO HEAD CLEANING
Moisture Condensation Warning
Moisture may form inside this unit under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When this unit is suddenly moved from a cold to warm
environment.
If moisture forms inside this unit, it may not operate properly
or damage the videotape. In such case, do not use this unit at
least for 2 hours until its inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is
prohibited.
Symbols Used in This Manual
• Automatically cleans video heads as you insert or remove a
cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted while
the TV program reception is clear. Dirt accumulated on
the video heads after a long period of use, or the usage of
rental or worn tapes can cause this problem. If a streaky or
snowy picture appears during playback, the video heads in
your unit may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a
good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,
please call our toll free customer support line found on
the cover of this manual to locate an Authorized Service
Center.
Hint
• Remember to read the instructions along with the video head
cleaner before use.
• Clean video heads only when problems occur.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
The following symbols appear in some headings in this
manual.
: Description refers to playback of video cassette
tapes.
: Description refers to playback of DVD-Video discs.
: Description refers to playback of Audio CDs.
–4–
EN
About Video Cassettes and Discs
Playable Video Cassettes
Use only cassettes marked
with this unit.
Playable
discs
Mark (logo)
DVD-Video
Region code
Recorded
signals
Disc size
Digital video
(MPEG2)
12 cm
or
8 cm
Digital audio
12 cm
or
8 cm
Precautions
Playable Discs
Disc types
or
*1, 2, 4, 6
DVD-RW
DVD-R
*1, 3, 4, 5, 6,
8, 9, 10
Example
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
DVD+RW
DVD+R
*1, 3, 4, 5, 6,
7, 8, 9
Audio CD
*4, 6
CD-RW
CD-R
Audio CD
Example
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
*4, 5, 6, 8, 9
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following.
*1:
*2:
*3:
*4:
*5:
*6:
*7:
*8:
*9:
*10:
This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
Discs Recorded in the VR (Video Recording) format cannot be played back.
Scratched or stained discs may not be played back.
Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or
special properties of discs.
You can play back discs which bear the marks above. If you use non-standardized discs, this unit may not play them
back. Even if they are played back, the sound or video quality will be compromised.
Only discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at
all. (the picture or sound may not be smooth, etc.)
If the recorded portion of the disc is too small (less than 2 3/16 inches (55 mm) across), it may not play back properly.
Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
You may play back the unfinalized DVD-RW/-R disc recorded in the video format on our brand’s DVD recorder. However,
depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may
not be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying
the DVD recorder.
Unplayable Discs
NEVER play the following discs as malfunction may result!
DVD-RAM, DVD-Audio, CD-i, Photo CD, Video CD, DVD with region codes other than 1 or ALL, CD-RW/-R with MP3 files,
DTS-CD, DVD-ROM for personal computers, CD-ROM for personal computers
On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
Any other discs without compatibility indications
–5–
EN
Setup
Connections
Connection to a TV
Please refer to “Basic TV Connection” on the front page before you use this unit.
VCP and Basic DVD Connection
Available for DVD only
DVD’s Picture quality
Basic Audio
Basic Picture
TV
Good Picture
Best Picture
L
COMPONENT
VIDEO IN
Y
R
CB
AUDIO IN
S-VIDEO IN
VIDEO IN
CR
AUDIO IN
L
R
VIDEO IN
Setup
Audio cable
(included)
Video cable
(included)
S-Video cable
(not included)
Component Video cable
(not included)
DVD/VCP
DVD/VCP
and
DVD/VCP
DVD
AUDIO
OUT
or
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
S-VIDEO
OUT
COMPONENT
VIDEO OUT
or
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO OUT
Y
L
L
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
COMPONENT
VIDEO OUT
Y
CB
COAXIAL
L
R
L
COAXIAL
CB
DVD/VCR
VCP
S-VIDEO
OUT
R
VIDEO OUT
COAXIAL
VIDEO OUT
R
CR
CR
R
or
(Analog) AUDIO OUT
VIDEO OUT
COMPONENT
VIDEO OUT
S-VIDEO OUT
Hint
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCP, pictures may be distorted due to the copy
protection system.
• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
Connection to an Audio System
Playing 2 Channel Audio
Playing Dolby Digital (Multi-channel audio)
Stereo system
Dolby Digital decoder, MD deck or DAT deck
L
Audio
COAXIAL
R
Digital audio input jack
Analog audio input jacks
Audio Coaxial Digital cable
(not included)
Audio cable
(included)
DVD/VCP
DVD/VCP
DVD
AUDIO
OUT
DIGITAL
AUDIO OUT
AUDIO OUT
DVD
AUDIO
OUT
S-VIDEO
OUT
COMPONENT
VIDEO OUT
L
L
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
DVD/VCP
S-VIDEO
OUT
COMPONENT
VIDEO OUT
Y
L
R
L
R
CB
COAXIAL
COAXIAL
VIDEO OUT
R
CR
R
AUDIO OUT
or
(Analog) AUDIO OUT
DIGITAL AUDIO OUT
After connecting to your TV:
SETUP > QUICK >
DOLBY DIGITAL
You will need to switch to video input on your TV. This is
usually marked TV/VIDEO, INPUT or AUX. Please refer to
your TV owner’s manual for details.
Connecting to a Dolby Digital decoder for
Dolby Digital audio output.
INPUT MODES FOR COMMON TV BRANDS
Connecting to other equipment (an MD
deck or DAT deck etc.) without Dolby
Digital decoder.
Listed below are inputs for common brand name TV’s.
Admiral:
AUX
Curtis Mathis: LINE1, LINE2, 00,
90, 91, 92, 93
GE:
INPUT, TV/VCR,
00, 90, 91, 92, 93
Hitachi:
INPUT, AUX
JVC:
VIDEO, VIDEO1,
VIDEO2, VIDEO3
Kenwood:
AUX
LXI-Series:
00
Magnavox:
AUX CHANNEL
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
Sony:
Toshiba:
Zenith:
TV/VIDEO
INPUT, TV/VCR,
00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2,
VIDEO3
TV/GAME
00
BITSTREAM
PCM
* To complete these settings, refer to pages 16-17.
Hint
• The audio source on a disc in a Dolby Digital Multi channel surround
format cannot be recorded as digital sound by an MD or DAT deck.
• By hooking this unit up to a Multi channel Dolby Digital decoder,
you can enjoy high-quality Dolby Digital Multi channel surround
sound as heard in the movie theaters.
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
–6–
EN
Preparation for Use
Front Panel Indicator Lights
Lights up when the
disc is inserted.
Lights up when the inserted
cassette is being played back.
OPEN/CLOSE
STANDBY-ON
Lights up when
power is on.
Lights up when the inserted
disc is being played back.
Blinks when an unacceptable
disc is inserted.
POWER ON
PLAY
VCP
CAS.IN
DVD
DISC IN
PLAY
IR
F.FWD STOP/EJECT
SOURCE
PLAY
PREV
STOP
PLAY
Lights up when this unit
is in the VCP mode.
Lights up when the
cassette is inserted.
NEXT
Lights up when this unit
is in the DVD mode.
Setup
REW
Selecting DVD or VCP Operation
You must first select either DVD or VCP operation.
DVD MODE
STANDBY-ON
OPEN/CLOSE
STANDBY-ON
OPEN/CLOSE
POWER ON
Press [DVD] on the remote control.
(The DVD SOURCE light will illuminate.)
1
2
3
4
5
6
7
8
9
0
+10
VCP
DVD
PLAY
VCP
CAS.IN
DVD
DISC IN
PLAY
IR
TRACKING
REW
DISPLAY
Press [VCP] on the remote control.
(The VCP SOURCE light will illuminate.)
SOURCE
PLAY
DVD button
SKIP
MENU
PLAY
NEXT
VCP SOURCE light
PLAY
SEARCH
MODE
STOP
MODE
VCP
STOP
TOP MENU
PREV
VCP button
CLEAR/
C. RESET
VCP MODE
F.FWD STOP/EJECT
DVD
DVD SOURCE light
PAUSE
SOURCE button
AUDIO
ENTER
SOURCE
SETUP
ZOOM
RETURN
Rear Terminals
Turning on Unit for the First Time
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
DVD/VCP
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO OUT
Y
L
Please note: most instructions in this
manual refer to remote control use.
VCP
L
CB
COAXIAL
R
VIDEO OUT
R
CR
1
2 3
4 5 6
1
Be sure your TV’s input is set to VIDEO (name may
vary with TV manufacturer. See your TV manual for
details.)
2
Select your language for the first time you turn
on this unit.
Press [K/L] to select your on-screen menu
language, then press [B] to exit.
1: DIGITAL AUDIO OUT COAXIAL* Jack
Connect a digital audio coaxial cable from here to the DIGITAL
AUDIO IN jack of a digital audio receiver. (cable not included)
LANGUAGE SELECT
B ENGLISH
[ON]
FRANCAIS
ESPAÑOL
STANDBY-ON
2: DVD AUDIO OUT* (analog) Jacks
Connect an audio cable from here to the AUDIO IN jacks of your
television or audio equipment. (cable included)
or
3: S-VIDEO OUT* Jack
Connect an S-Video cable from here to the S-VIDEO IN jack of your
television. (cable not included)
To Change the Selected Menu Language
1
4: COMPONENT VIDEO OUT* Jacks
Connect component video cables from here to the COMPONENT
VIDEO IN jacks of your television. (cable not included)
Press [SETUP].
The “LANGUAGE SELECT” menu appears.
SETUP
5: DVD/VCP VIDEO OUT Jack
Connect a video cable from here to the VIDEO IN jack of your
television or audio equipment. Standard connection for DVD/VCP
use. (cable included)
2
Select “ENGLISH”, “FRANCAIS” or “ESPAÑOL”,
then press [CLEAR/C.RESET] to exit.
LANGUAGE SELECT
B ENGLISH
[ON]
FRANCAIS
6: DVD/VCP AUDIO OUT Jacks
Connect an audio cable from here to the AUDIO IN jacks of your
television or audio equipment. Standard connection for DVD/VCP
use. (cable included)
CLEAR/
C. RESET
ESPAÑOL
or
Hint
* For enhanced DVD viewing. DVD/VCP video and audio connection
required to view video cassettes.
• Also, you can use [SETUP] to exit the “LANGUAGE SELECT” menu.
Hint
• Audio and video cables are included for both VCP and DVD viewing.
You can enhance your DVD picture and sound quality with a variety
of special audio and video cables, which are sold separately.
–7–
EN
Remote Control
DVD mode
STANDBY-ON
1
2
3
TRACKING
4
5
7
6
8
9
0
+10
VCP
DVD
1
2
3
4
5
6
7
8
9
0
+10
• To select chapter or title
directly.
• To select track directly.
• To search forward/backward through a disc.
• To begin slow forward/reverse
playback in the pause mode.
• To search forward/backward through a disc.
A-B
• To repeat between your
chosen point of A and B.
• To repeat between your
chosen point of A and B.
ANGLE
• To select camera angles
on a disc.
AUDIO
• To select audio languages
on a disc.
• To select STEREO, L-ch or
R-ch.
• To clear the markers.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To clear the markers.
• To remove status number
in program input.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To exit the LANGUAGE
SELECT Menu.
• To reset the tape counter.
• To display the current disc
mode.
• To display the current disc
mode.
• To display the current tape
counter.
• To select DVD output
mode.
• To activate DVD mode.
• To select the DVD output
mode.
• To activate DVD mode.
• To move the cursor and
determine its position.
• To move the cursor and
determine its position.
CLEAR/
C. RESET
DISPLAY
MODE
PLAY
STOP
SKIP
TOP MENU
SEARCH
MODE
MENU
PAUSE
AUDIO
ENTER
Setup
SETUP
ZOOM
SUBTITLE
ANGLE
REPEAT
A-B
DISPLAY
DVD
Installing the Batteries for the
Remote Control
Install two AA batteries (included),
matching the polarity indicated inside
battery compartment of the remote
control.
2
• To forward/backward a tape.
• To begin slow forward
playback in the pause mode.
RETURN
CLEAR/
C. RESET
1
VCP mode
Disc/Tape
Button
(Alphabetical order)
OPEN/CLOSE
ENTER
MENU
• To call up the Menu on a
disc.
MODE
• To set black level on/off.
• To set virtual surround on/off.
• To arrange the playing
order or play randomly.
• To set virtual surround on/off.
• To open or close the disc
tray.
• To open or close the disc
tray.
• To eject the video
cassette from the VCP.
• To pause disc playback.
• To advance playback one
frame at a time.
• To pause disc playback.
• To pause tape playback.
• To advance playback one
frame at a time.
3
OPEN/CLOSE
PAUSE
Keep in mind the following when using
the remote control:
• Make sure that there are no obstacles
between the remote control and the
remote sensor on the unit.
• The maximum operable ranges from
the unit are as follows.
- Line of sight: approx. 23 feet (7m)
- Either side of center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
• To set the LANGUAGE SELECT
menu, Index and
Time Search.
• To begin disc playback.
• To begin disc playback.
• To begin tape playback.
REPEAT
• To play a chapter or title
repeatedly.
• To play a track or disc
repeatedly.
• To select the Auto Repeat
on/off.
RETURN
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
SEARCH
MODE
• To search chapter, title or
time.
• To set or search the markers.
• To search track.
• To search time.
• To set or search the markers.
• To call up the index or time
search menu.
SETUP
• To call up the DVD setup
menu.
• To call up the DVD setup
menu.
• To call up the LANGUAGE
SELECT Menu.
• To skip chapters or titles.
• To skip tracks.
• To turn the unit on/off.
• To turn the unit on/off.
• To turn the unit on/off.
• To stop playback.
• To stop playback.
• To stop playback.
PLAY
SKIP
STANDBY-ON
STOP
Hint
• Do not mix alkaline and manganese
batteries.
• Do not mix old and new batteries.
• If you turn off this unit, [OPEN/CLOSE A]
on the remote control is not available.
Be sure to use [OPEN/CLOSE A] or
[STOP/EJECT C A] on the unit.
SUBTITLE
• To select subtitles on a
disc.
TOP MENU
• To call up the Top Menu on
a disc.
TRACKING
TRACKING
• To adjust the tracking
manually during playback.
VCP
ZOOM
• To select the VCP output mode.
• To activate VCP mode.
• To magnify part of a picture.
(x2/x4)
–8–
EN
VCP Functions
Playback
Before: Turn on the TV.
VCP
STANDBY-ON
OPEN/CLOSE
4
1
1
Insert a video cassette into
this unit.
The unit will start playback
automatically.
2
2
STANDBY-ON
3
TRACKING
4
5
6
7
8
9
0
+10
VCP
DVD
POWER ON
PLAY
CAS.IN
CLEAR/
C. RESET
DISPLAY
3
To stop playback
3
In stop mode, eject the
cassette.
4
STOP
MODE
F.FWD STOP/EJECT
PLAY
PLAY
1
3
STOP
OPEN/CLOSE
REW
3 4
3
Hint
To start playback again
• Tracking will be automatically adjusted upon playback. To adjust
the tracking manually, press [TRACKING K/L] during playback.
PLAY
To cue or review picture during playback (Picture Search)
To play back in slow motion (Slow mode)
Use [g] or [h] ([ F.FWD g] or [REW h] on this unit).
• Press it again and the unit will search in super high speed.
(in the SLP mode only)
Press [PAUSE F] during playback, then press [g] ([ F.FWD g]
on this unit).
• If you want to change speed in slow mode, press [g]
or [h] ([ F.FWD g] or [REW h] on this unit), slow
speed will be more fast and slow mode.
• If the noise bars appear on the TV screen, you can reduce it
by using [TRACKING K/L].
To freeze the picture on TV screen during playback (Still mode)
Press [PAUSE F]. Each time you press the button, the
picture will be forwarded by one frame.
• If the picture begins to vibrate vertically in the still mode,
stabilize the picture by using [TRACKING K/L].
• If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV if equipped.
Auto Rewind
When a tape reaches its end during playback or fast-forward,
the tape will automatically rewind to the beginning. After
rewinding finishes, the unit will eject the tape.
Counter Reset
Press [CLEAR/C.RESET] to reset the current tape counter.
Hint
• To prevent damage to tape, Still/Slow mode will automatically stop after five minutes.
• To return to playback from the Picture Search/Still/Slow mode, press [PLAY B].
Index Search
Time Search
To search by index mark. The Index Mark will be made automatically at the beginning of each recording.
To search by length of time.
VCP
VCP
• Insert a tape into this unit.
1
• Insert a tape into this unit.
Press [SEARCH MODE] once.
1
INDEX SEARCH
SEARCH
MODE
––
2
2
INDEX SEARCH
01 ~ 20
03
Beginning
of the tape
SEARCH
MODE
Select the desired length of time
for fast forwarding or rewinding.
or
End of
the tape
01
01
02
0:01~ 9:59
(1 minute~9 hours and 59 minutes)
03
INDEX MARK
3
TIME SEARCH
2:50
CURRENT PROGRAM
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02
TIME SEARCH
–:––
To select Index Mark
or
Press [SEARCH MODE] twice.
To rewind
3
To rewind
ss
ss
To fast forward
To fast forward
BB
BB
4
When index mark is reached,
playback automatically begins.
PLAYB
Hint
• This unit does not have recording function, so you must record a
tape from another equipment.
• The time gap between Index Marks should be greater than 1 minute
for SP mode, 2 minutes for LP mode and 3 minutes for SLP mode.
4
When selected length of time is
reached, playback will start
automatically.
PLAYB
Hint for Index Search & Time Search
• Press [STOP C] to stop the search.
• If a tape ends during a search, your search will be canceled and
the tape will rewind to the beginning.
–9–
EN
VCP Functions
Other Operations
Auto Repeat
When Auto Repeat is on, the tape will automatically rewind and start over when it reaches the end. This will continue until Auto
Repeat is turned off.
VCP
1
In stop mode, press [REPEAT] to set AUTO
REPEAT to ON so that “AUTO REPEAT”
appears.
AUTO REPEAT B
2
REPEAT
Press [REPEAT] again to set
AUTO REPEAT to OFF so that “PLAY”
appears.
PLAY B
REPEAT
Hint
• The Auto Repeat mode can be confirmed to ON or OFF by pressing [DISPLAY] during playback.
• The Auto Repeat playback will start automatically if you set AUTO REPEAT to ON in stop mode.
VCP Functions
– 10 –
EN
DVD Functions
Playback
Before: Turn on the TV, amplifier and
any other components which are
connected to this unit. Make sure the
TV and audio receiver (not included)
are set to the correct channel.
STANDBY-ON
1
2
3
4
5
6
7
8
9
0
+10
STANDBY-ON
POWER ON
PLAY
CLEAR/
C. RESET
DISPLAY
2
OPEN/CLOSE
STANDBY-ON
1
TRACKING
DVD
DV
1
OPEN/CLOSE
3
4
Insert a disc with
label facing up.
VCP
CAS.IN
DVD
DISC IN
PLAY
IR
VCP
DVD
MODE
REW
F.FWD STOP/EJECT
SOURCE
PLAY
PREV
STOP
PLAY
NEXT
PLAY
1
STOP
1 2
Lights up when power is on.
4 3
OPEN/CLOSE
Hint
3
To start
playback
4
• A “prohibited icon” may appear at the top-right on the TV screen when the operation
is prohibited by the disc or this unit.
• Some DVDs may be played from title 2 or 3 due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a moment. This
happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.
To stop
playback
STOP
PLAY
TIP: You can change the on-screen language for DVD function in “PLAYER MENU” setting. (Refer to 16.)
Fast Forward / Reverse Search
DVD menu
DVD
DV
DVD
DV
E1
Press [g] or [h] repeatedly during playback to
select the required forward or reverse speed.
To use [PREV H], [NEXT G] on this unit
Pressing and holding [PREV H] or [NEXT G] on this unit
will also change forward or reverse playback speed.
To continue playback, press [PLAY B].
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
DVD
DV
• For DVDs, fast forward or reverse search speed is different depending
on the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50), 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8), 3(x30).
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for details.
Slow Forward / Reverse
DVD
DV
1
Resume
Press [g] or [h] repeatedly in the pause mode
to select the required forward or reverse speed.
To use [PREV H], [NEXT G] on this unit
Pressing and holding [PREV H] or [NEXT G] on this
unit in the pause mode will also change forward or reverse
playback speed.
To continue playback, press [PLAY B].
DVD
DV
Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Hint
Hint
• To cancel resume, press [STOP C] one more time in the stop mode.
• The resume information stays on even when the power is turned off.
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8), 3(1/2).
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in
the slow playback mode are blurred. (Refer to 16-17.)
Zoom
Paused and Step-by-Step Playback
DVD
DV
DVD
DV
1) Press [ZOOM] during playback.
2) Press [ZOOM] repeatedly to select the required zoom
factor: x2, x4 or OFF.
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
DVD
DV
x2
x4
The disc goes forward by one frame each time [PAUSE F] is
pressed in the pause mode.
To continue playback, press [PLAY B].
3) Press [K / L / s / B] to slide the zoomed picture across
the screen.
4) To exit zoom mode, press [ZOOM] to select OFF.
Hint
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if
pictures in the pause mode are blurred. (Refer to 16-17.)
Hint
To use [PREV H], [NEXT G] on this unit
DVD
DV
Press once to skip chapters, tracks or titles to a desired point.
• Zooming function does not work while the disc menu is displayed.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE k] or [h]
repeatedly in the zoom mode.
x2(x4) to the
• In the zoom mode, it automatically changes
zoomed position guide.
– 11 –
EN
DVD Functions
Hint
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
DVD
DV
DVD
DV
Angle icon appears only in a case
multi-angle is available on the DVD.
DISPLAY
DISPLAY
Current playback status
Current playback status
1
Remaining time of the current chapter
Elapsed time of the current chapter
CH(Chapter):
Current chapter number / Total chapters
DISPLAY
2
1
11/16 0:00:00 - 0:03:30
1/3
4/12 0:03:21 - 0:02:15
2
4/12 0:13:45 - 0:45:40
Elapsed time of the current title
TT(Title):
Current title number / Total titles
T
L1
ALL:
Current track number / Total tracks
DISPLAY
Layer numbers, appears only when
playing a two-layered disc.
L0: Layer 0 is playing
L1: Layer 1 is playing
3
Current repeat setting, appears only
when the repeat setting is active.
C: Chapter repeat
T: Title repeat
A B: A-B repeat
DVD Functions
DISPLAY
T
Current repeat setting, if active
T: Track repeat
A: All Tracks repeat
A B: A-B repeat
Remaining time of the entire disc
Elapsed time of the entire disc
Remaining time of the current title
3
Remaining time of the current track
Elapsed time of the current track
TR(Track):
Current track number / Total tracks
DISPLAY
0:00:00 - 1:23:45
DISPLAY
T
Hint
• When you are playing a disc in PROGRAM or RANDOM mode,
PROGRAM (or RANDOM) will be displayed instead of 2 .
BIT RATE: The amount of audio and
video data currently being read
4
– 12 –
EN
Search Functions
SEARCH MODE does not work during Programmed or Random Playback.
Using Time Search
Using Track Search
DVD
DV
1
DVD
DV
Press [SEARCH MODE].
1
SEARCH
MODE
Press [SEARCH MODE] repeatedly until the Time Search
display appears.
SEARCH
MODE
/29
TOTAL
1:29:00
PLAY
Select track number by using the Number buttons within 30 seconds.
1
2
3
4
5
6
7
8
9
0
+10
2
Select a desired disc time by using the Number buttons within
30 seconds. 1 2 3
/29
• For the disc with less than 10 tracks, press the track number directly.
• For discs with more than 10 but less than 99 tracks, to play singledigit track, press [0] first, then the track number (e.g. for track 3,
press [0], [3]). To play a double-digit track, press the track number.
Using [SKIP H, G]
1
Press [SKIP H, G] during playback.
SKIP
5
6
7
8
9
0
+10
TOTAL
1:29:00
Hint
• When there is no need to enter a number, “0” appears automatically.
For example, “0: 0_: _ _” appears in the Time Search display if the
total time of the title or track is less than 10 minutes.
• Press [CLEAR/C.RESET] to erase the incorrect input at step 2.
Marker Setup
Current Track
(TR)
DVD
DV
TR 1 TR 2 TR 3 TR 4
SKIP
SKIP
PLAY
4
This feature allows you to assign a specific point on a disc to
be called back later.
Hint
• [+10] can also bring the Track search display, except for the disc
with less than 10 tracks. For such a disc, track search can be done
by just pressing the track number.
To set a marker
[SEARCH MODE] repeatedly until the marker display
1 Press
appears.
SEARCH
MODE
Using Title / Chapter Search
PLAY
DVD Functions
2
DVD
DV
2
1
or
Press [SEARCH MODE] once for the Chapter Search.
Press [SEARCH MODE] twice for the Title Search.
3
SEARCH
MODE
Select a marker.
Press [ENTER].
ENTER
/12
PLAY
2
To return to the marker later
[SEARCH MODE] repeatedly until the marker display
1 Press
appears.
Select title/chapter number by using the Number buttons
within 30 seconds.
1
2
3
4
5
6
7
8
9
0
+10
SEARCH
MODE
/12
2
Using [SKIP H, G]
1
or
Press [SKIP H, G] during playback.
Current Chapter
(CH)
SKIP
PLAY
Select the marker.
3
CH 1 CH 2 CH 3 CH 4
SKIP
SKIP
or
Current Title
(TT)
Press [ENTER] at the desired marker.
ENTER
To exit the marker screen
1 Press [RETURN ]. RETURN
TT 1 TT2 TT3 TT4
SKIP
SKIP
(If the disc has no chapters)
Hint
Hint
• Depending on the disc being played, this function can also be
performed by directly entering the desired chapter number with the
Number buttons. Refer to the manual accompanying the disc.
• The Marker display will disappear in about 30 seconds when there is no output.
• To clear a marker, select the marker to be cleared at step 2 in the
section “To set a marker” or “To return to the marker later” and
then press [CLEAR/C.RESET].
• Opening the disc tray or turning off the power will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To
return to the marker later” will also erase all markers.
– 13 –
EN
Repeat / Random / Programmed Playback
Repeat Playback
Random Playback
DVD
DV
DVD
DV
Repeat function is available only during playback.
1
This function shuffles the playing order of tracks instead
of playback in sequence.
Press [REPEAT] during playback.
1
REPEAT
Press [MODE] twice.
RANDOM
CD-DA
PLAY
STOP
<Example : DVD>
(repeat off)
CHAPTER
(current chapter repeat)
TITLE
(current title repeat)
OFF
(repeat off)
TRACK
(current track repeat)
ALL
(entire disc repeat)
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
PLAY
Each time you press [REPEAT], repeat function changes as
example below.
OFF
MODE
2
Press [PLAY B] to start Random Playback.
PLAY
Hint
• To repeat the current track in the random selections, press
[REPEAT] repeatedly until “ TRACK” appears during playback.
• To repeat the entire random selections, press [REPEAT] repeatedly until “ ALL” appears during playback.
• During random playback, you cannot go back to the previous track.
Programmed Playback
Hint
DVD
DV
• Repeat setting (except “ALL”) will be cleared when moving to
another title, chapter, track or group.
• Repeat playback are not available with some discs or during repeat
A-B playback.
You may determine the order in which tracks will play.
1
Press [MODE] once.
DVD Functions
Repeat A-B Playback
CD-DA
TOTAL 0:00:00
CD-DA
TOTAL 1:03:30
MODE
STOP
DVD
DV
Repeat function is available only during playback.
1
2
Press [A-B] at your desired starting point (A).
ENTER
A-B
or
A-
PLAY
2
Using [K/L] to select desired track.
Press [ENTER].
A-B
3:30
5:10
4:20
3:00
3:20
4:10
2:50
2/3
• Up to 99 tracks can be programmed.
• If eight or more tracks were in a program,
use [SKIP H, G] to see all the tracks.
Press [A-B] at your desired ending point (B).
A-B
1
5
10
11
12
17
22
3
Press [PLAY B] to start Programmed Playback.
PLAY
• Point B should be in the same title or track as point A.
Hint
Hint
• To exit the sequence, press [A-B] so that “OFF” appears.
• To cancel point A, press [CLEAR/C.RESET] at step 1.
• This function does not work in the other repeat modes.
• Press [CLEAR/C.RESET] at step 2 to erase the most recently
entered track.
• To erase all programmed tracks at once, select “ALL CLEAR’’ and
press [ENTER] at step 2.
• While a program is being played back, [STOP C] works as follows;
⇒ Press [STOP C] and [PLAY B] next, so that the programmed
playback restarts. (CD playback restarts from the current point.)
⇒ Press [STOP C] twice and [PLAY B] next, so that playback
restarts from the first track in the original order. However, your
programmed playback can be restarted when you follow the
above steps. (Your programs are still stored until either the disc
tray is open or power is turned off.)
• To repeat the current track in the program, press [REPEAT]
repeatedly until “ TRACK’’ appears during playback.
• To repeat the entire program, press [REPEAT] repeatedly until
“ ALL’’ appears during playback.
– 14 –
EN
Special Settings
Subtitle Language
Camera Angles
DVD
DV
DVD
DV
This unit allows you to select a subtitle language (if
available) during DVD playback.
1
Some DVD discs may contain scenes which have
been shot simultaneously from various angles.
You can change the camera angle if the angle
icon appears on the screen. If the “ANGLE ICON”
setting is “OFF” in the OTHERS menu, the angle icon will not
appear. (Refer to pages 16-18.)
Press [SUBTITLE] during playback.
SUBTITLE
1.ENG/6
PLAY
1
Each time you press [SUBTITLE], subtitle language changes
as example below.
OFF
Press [ANGLE] during playback.
1/8
ANGLE
PLAY
(no subtitles)
Each time you press [ANGLE] or [s / B], camera angle changes.
(English subtitles)
FRE
(French subtitles)
Black Level Setting
DVD
DV
...
ENG
1
To set subtitle ON/OFF
1 Press [SUBTITLE] during playback.
SUBTITLE
Press [MODE] during playback.
ON
MODE
PLAY
1.ENG/6
2
PLAY
ENTER
Press [ENTER] to
adjust the black level.
OFF
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
Press [B] to select subtitle “ON” or “OFF”.
OFF
3
Hint
Press [RETURN
] to exit.
RETURN
Stereo Sound Mode
• If your language is not shown after pressing [SUBTITLE] several
times, the disc may not have that language. However, some discs
have the subtitle language setting on the disc menu. (Operation varies
depending on the discs, so refer to the manual along with the disc.)
• When “NOT AVAILABLE” appears on the TV screen, it means no
subtitle is recorded on the scene.
• If you choose a language that has a three- letter-language code, the code
will be displayed every time you change the subtitle language setting. If you
choose any other languages, ‘---’ will be displayed instead. (Refer to page 20.)
• Some discs will only allow you to change the subtitle from the disc
menu. Refer to the manual accompanying the discs for details.
DVD
DV
1
Press [AUDIO] during CD playback.
STEREO
AUDIO
PLAY
Each time you press [AUDIO], sound mode changes as example below.
Audio Language
DVD
DV
This unit allows you to select an audio language (if multiple
languages are available) during DVD playback.
This unit allows you to select a sound
mode during CD playback.
STEREO
(right and left channels are active)
L-ch
(left channel is active)
R-ch
(right channel is active)
Virtual Surround
DVD
DV
1
Press [AUDIO] to change audio language.
AUDIO
You can enjoy stereophonic virtual world on your existing 2
channel stereo system.
1.ENG Dolby D 3/2.1ch 48k/3
PLAY
Each time you press [AUDIO], the audio language changes as
example below.
(English audio)
SPA
(Spanish audio)
FRE
(French audio)
Press [MODE] twice (once for CD) during playback.
MODE
OFF
PLAY
2
Press [ENTER] for
the desired effect.
ENTER
1
1: Natural effect
2: Emphasized effect
OFF: No effects (original sound)
...
ENG
1
3
Hint
• If your language is not shown after pressing [AUDIO] several
times, the disc may not have that language. However, some discs
allow audio language setting on the disc menu. (Operation varies
depending on the disc, so refer to the manual along with the disc.)
• When “OFF” appears on the TV screen, it means audio language is not available.
• Some discs will only allow you to change the audio setting on the
disc menu. Refer to the manual accompanying the discs for details.
Press [RETURN
] to exit.
RETURN
Hint
• For DVDs, when playing back 96kHz with Virtual Surround
function, the sound will be down sampled to 48kHz.
• For Audio CDs, Virtual Surround will not be effective if the sound
mode is set to something other than STEREO. Refer to “Stereo
Sound Mode”.
– 15 –
EN
DVD Functions
2
Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.
DVD Setup
DVD
DV
QUICK SETUP Menu
You can select the “PLAYER MENU”, “TV ASPECT” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.
1
2
Press [SETUP] in the stop mode.
Select the desired item.
or
SETUP
STOP
SETUP
QUICK
ENTER
<SETUP MENU>
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
Confirm that “QUICK” is selected.
SETUP
P16 A Step 5
P17 B Step 5
P17 C Step 5
ENGLISH
4:3 LETTER BOX
BITSTREAM
QUICK
CUSTOM
INITIALIZE
ENTER
• Refer to the sections “PLAYER MENU”, “TV ASPECT” or
“DOLBY DIGITAL” section on pages 16-17.
CUSTOM Menu
You can change the settings of the unit.
• QUICK on pages 16-17 indicates DVD Setup menus also accessible from the QUICK SETUP menu.
1
2
Press [SETUP] in the stop mode.
3
Select “CUSTOM”.
Select the desired item.
ENTER
SETUP
STOP
or
or
<SETUP MENU>
ENTER
DVD Functions
LANGUAGE menu
LANGUAGE
DISPLAY menu
SETUP
DISPLAY
CUSTOM
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
QUICK
CUSTOM
INITIALIZE
QUICK
CUSTOM
INITIALIZE
SETUP
SETUP
SETUP
SETUP
AUDIO menu
SETUP
PARENTAL menu
SETUP
AUDIO
PARENTAL
OTHERS menu
SETUP
OTHERS
PASSWORD
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
TV ASPECT
STILL MODE
page 16 A
A
4:3 LETTER BOX
AUTO
page 17 B
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
page 17 C
ANGLE ICON
AUTO POWER OFF
Please enter a 4-digit password.
page 18 D
ON
ON
page 18 E
LANGUAGE Setting
Follow steps 1 to 3 in the “CUSTOM Menu” section on above.
4
5
Select the desired item.
or
LANGUAGE menu
SETUP
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
Select the desired language.
LANGUAGE
ORIGINAL
OFF
ENGLISH
ENGLISH
Hint
• In QUICK SETUP Menu,
“PLAYER MENU”, “TV ASPECT”
or “DOLBY DIGITAL” are
available. QUICK SETUP Menu
consists of the setting menus
frequently used, and they are
accompanied with QUICK mark.
You can make all settings in
CUSTOM Menu.
ENTER
6
To exit the menu
SETUP
ENTER
or
AUDIO: *1 *2
(Default: ORIGINAL)
Sets the audio language.
SUBTITLE: *1 *2
(Default: OFF)
Sets the subtitle language.
AUDIO
ORIGINAL
ENGLISH
FRENCH
SUBTITLE
OFF
ENGLISH
FRENCH
DISC MENU: *1
(Default: ENGLISH)
Sets the language for
DVD menu.
DISC MENU
ENGLISH
FRENCH
SPANISH
PLAYER MENU: QUICK
(Default: ENGLISH)
Sets the language for the
On-screen display.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
– 16 –
Hint
*1
• Language options are not available
with some discs.
• If OTHER is selected on the AUDIO,
SUBTITLE or DISC MENU screen,
press four-digit number to enter the
code for the desired language. (Refer
to “Language Code List” on page 20.)
• Only the languages supported by the
disc can be selected.
*2
• LANGUAGE Setting for AUDIO and
SUBTITLE are not available with
some discs. Then use [AUDIO] and
[SUBTITLE]. Details are on page 15.
EN
B
DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 16.
Select the desired item.
6
5
TV ASPECT: QUICK
(Default: 4:3 LETTER BOX)
See Hint on the right.
or
TV ASPECT
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
ENTER
DISPLAY menu
SETUP
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
SETUP
ENTER
Hint
or
DISPLAY
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
STILL MODE:
(Default: AUTO)
See Hint on the right.
STILL MODE
Hint
TV ASPECT
STILL MODE
• In QUICK SETUP Menu,
“PLAYER MENU”, “TV ASPECT”
or “DOLBY DIGITAL” are
available. QUICK SETUP Menu
consists of the setting menus
frequently used, and they are
accompanied with QUICK mark.
You can make all settings in
CUSTOM Menu.
C
Select the
desired
setting.
4:3 LETTER BOX
AUTO
ENTER
AUTO
FIELD
FRAME
To exit the TV ASPECT or
STILL MODE screen
Select the
desired
setting.
ENTER
or
TV ASPECT:
• Select “4:3 LETTER BOX”,
so that black bars may
appear on the top and
bottom of the screen.
• Select “4:3 PAN & SCAN”
for a full height picture with
both sides adjusted.
• Select “16:9 WIDE” if a
wide-screen TV is
connected to this unit.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, automatically select the best
resolution setting (FRAME
or FIELD) based on the
data characteristics of the
pictures. (default)
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
• An individual picture on
the TV screen is called a
“frame”, which consists of
two separate images called
as “field”.
• Some pictures may be
blurred if you select “AUTO”
in the still mode due to their
data characteristics.
AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3
in the “CUSTOM Menu” section on page 16.
4
Select the desired item.
5
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
6
To exit the menu
SETUP
or
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
ENTER
AUDIO menu
SETUP
OFF
ON
BITSTREAM
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
Hint
• In QUICK SETUP Menu,
“PLAYER MENU”, “TV ASPECT”
or “DOLBY DIGITAL” are
available. QUICK SETUP Menu
consists of the setting menus
frequently used, and they are
accompanied with QUICK mark.
You can make all settings in
CUSTOM Menu.
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
ON
OFF
BITSTREAM
ENTER
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: Outputs Dolby Digital Signals.
• PCM: Converts the Dolby Digital into PCM (2 channel).
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
Hint
DRC:
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing back a 96kHz
disc with the copyright
protection, or when Virtual
Surround is set to “1” or
“2”, the sound will be down
sampled at 48kHz and
output as digital audio even
if the “DOWN SAMPLING”
is set to “OFF”.
• This function is available
only on digital outputting of
a disc recorded in 96kHz.
ON
ON
PCM
ENTER
– 17 –
EN
DVD Functions
4
D
PARENTAL Setting
This feature prevents unit from playing material inappropriate for children.
Parental Levels
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.
Follow steps 1 to 3 in the “CUSTOM Menu” section on page 16.
4
5
Enter your desired four-digit
password.
6
Select “PARENTAL
LEVEL”.
7
Select the desired
level.
To exit the menu
SETUP
1
2
3
4
5
6
7
8
9
0
+10
or
ENTER
ENTER
PARENTAL LEVEL
PASSWORD CHANGE
PARENTAL menu
SETUP
PARENTAL LEVEL
ALL
8 [ADULT]
7 [NC-17]
6 [R]
ALL
ENTER
CONTROL LEVELS
• ALL:
All parental locks are canceled.
• Level 8:
DVD software of any grades (adult/general/children) can be played back.
• Levels 7 to 2: Only DVD software intended for general use and children can be played back.
• Level 1:
Only DVD software intended for children can be played back, with those
intended for adult and general use prohibited.
TIPS FOR LEVELS
• 8 [ADULT]:
DVD software of any grades (adult/general/children) can be played back.
• 7 [NC-17]:
No one under 17 admitted
• 6 [R]:
Restricted; under 17 requires accompanying parent or adult guardian
• 5 [PGR]:
Parental Guidance Recommended
• 4 [PG13]:
Unsuitable for children under 13
• 3 [PG]:
Parental Guidance suggested
• 2 [G]:
General Audience
• 1 [KID SAFE]: Suitable for children
PARENTAL
PASSWORD
Please enter a 4-digit password.
or
If you have set a password
already, enter the current
four-digit password.
SETUP
or
PARENTAL
PASSWORD
Enter current password.
Hint
• Some DVD-Video discs may not respond to the parental lock settings. Make sure this
function works with your DVD-Video discs.
To Change the Password for Parental Controls
DVD Functions
You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 16.
4
Enter current four-digit
password.
1
2
3
4
5
6
7
8
9
0
+10
5
6
Select “PASSWORD
CHANGE”.
or
PARENTAL LEVEL
PASSWORD CHANGE
7
Enter your new
four-digit password
(except for 4737).
ENTER
ALL
1
2
3
4
5
6
7
8
9
0
+10
SETUP
ENTER
PARENTAL menu
SETUP
SETUP
PARENTAL
PARENTAL
PASSWORD
PASSWORD
Please enter a 4-digit password.
Enter current password.
E
To exit the menu
Hint
• Record the password in
case you forget it.
• If you forget the
password, press [4],
[7], [3], [7] at step 4,
then enter your new
password. Password
will be cleared and
parental levels will be
set to “ALL”.
OTHERS Settings
You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 16.
4
Select the desired item.
or
5
ANGLE ICON:
(Default: ON)
Set to “ON” to show the angle icon when multiple camera
angles are available during DVD playback.
To exit the menu
SETUP
OFF
ON
ANGLE ICON
ON
AUTO POWER OFF ON
ENTER
OTHERS menu
SETUP
6
OTHERS
ANGLE ICON
AUTO POWER OFF
ON
ON
AUTO POWER OFF:
(Default: ON)
Set to “ON” to turn this unit off automatically after 30 minutes
of no use.
ANGLE ICON
ON
AUTO POWER OFF ON
ON
OFF
ENTER
– 18 –
EN
Reset to the Default Setting (Except for PARENTAL Setting)
1
2
Press [SETUP] in the
stop mode.
3
Select “INITIALIZE”.
4
Select “YES”.
To exit the menu
SETUP
SETUP
STOP
or
or
ENTER
ENTER
<SETUP MENU>
SETUP
SETUP
SETUP
Press
twice.
Initialize?
NO
YES
QUICK
CUSTOM
INITIALIZE
QUICK
CUSTOM
INITIALIZE
INITIALIZE
Hint
• When you do not
wish to initialize,
select “NO” at step 3.
Information
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this Owner’s Manual, refer to the following:
PROBLEM
CORRECTIVE ACTION
DVD / VCP
No power.
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not respond to
the remote control.
•
•
•
•
•
•
Poor picture or noise.
• Interference signal may be received. Change the position and direction of the unit.
Check if the power plug is connected to an AC outlet.
Check the batteries in the remote control.
Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote control.
You have to be within 23 feet (7m) of this unit.
Check if a cassette tape is in this unit.
Tune your radio to an empty AM station so that you hear a lot of static. Turn the volume up, then if you hear some signal
sound from the radio in response to your pressing buttons on the remote control, the remote control is working.
• Press and hold any button on remote control toward a digital camera. The remote control is working if you confirm infrared
light through the digital camera.
Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing [TRACKING K/L] on the remote control.
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”. (See page 4.)
• Make sure the VCP is not in the Menu mode.
No or poor, playback picture.
• Fine tune your TV.
Video or color fades in and out when
making a copy of a videotape.
• You cannot copy a copyrighted videotape. You are experiencing copy guard protection.
DVD
Cannot remove the tape.
• Check if this unit is in the VCP mode. If not, press [VCP] on the remote control to switch the mode.
No picture.
• Connect the video cable firmly.
• Insert a correct video disc that plays on this unit.
• Press [DVD] on the remote control. Check if the DVD SOURCE light will illuminate. Then try other DVD features.
Disc cannot be played.
•
•
•
•
•
Insert the disc.
Clean the disc.
Place the disc correctly with the label side up.
Cancel the parental lock or change the control levels.
Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No sound.
•
•
•
•
Connect the audio cables firmly.
Turn the power of the audio component on.
Correct the audio output settings.
Correct the input settings on the audio component.
No DTS audio is output.
• This unit does not support DTS audio.
-This is not a malfunction.
Distorted picture.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language does
not match the setup.
• The selected language is not available for audio or subtitles on the DVD.
-This is not a malfunction.
The camera angle cannot be
changed.
• The DVD does not contain sequences recorded from different camera angles.
-This is not a malfunction.
Audio or subtitle language
cannot be changed.
• The DVD does not contain audio source or subtitles in the selected language.
-This is not a malfunction.
“Prohibited icon” appears on the
screen, prohibiting an operation.
• That operation is prohibited by this unit or the disc.
-This is not a malfunction.
Information
VCP
Cannot view picture but the
audio is OK.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for details on
correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
– 19 –
EN
Specifications
Video Heads :
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between
languages, the default language will be
English.
Operating temperature :
Four Heads
41°F (5°C) to 104°F (40°C)
Output signal format :
Dimensions :
NTSC color
Power source :
120 V AC +/- 10%, 60 Hz +/- 0.5%
W : 17 3/16”
H : 3 3/4”
D : 9 3/16”
(435mm)
(94mm)
(233mm)
Weight :
Power consumption :
Approx 5.8lbs (2.6kg)
21W (standby : 3.8W)
Language Code List
Language
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
Language
Code
Language
Code
Language
Code
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
6565
6557
6558
6561
5165
6567
6569
6568
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language
setting on page 15. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)
LIMITED WARRANTY
Information
FUNAI CORP. will repair this product, free of charge in the USA in the event
of defect in materials or workmanship as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without
charge for one (1) year from the date of original retail purchase.
Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of
ninety (90) days from the date of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase
receipt or other proof of original retail purchase will be required together with
the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are
altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product
not purchased and used in the United States.
This product is produced for home use and this warranty only covers failures
due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused
by repairs, alterations or product not supplied by FUNAI CORP., or damage
which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel,
rental or office use of this product or damage which results from fire, flood,
lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS,
COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS
FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY
FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL
WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY
AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN
THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF,
AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE
CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF
THIS PRODUCT WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product
freight prepaid, in either its original packaging or packaging affording an equal
degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service
providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general
service inquiries, please contact us at:
– 20 –
FUNAI CORPORATION
Customer Service
Tel :1-800-605-8610
http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501
EN
Español
1 Conexiones
Consulte la “Basic TV Connection” en la página delantera
antes de utilizar esta unidad.
2
Instalación de las pilas del control remoto
1
3
2
3
Conmutación DVD/VCP
OPEN/CLOSE
STANDBY-ON
VCP
DVD
DISC IN
PLAY
OPEN/CLOSE
1
2
3
4
5
6
7
8
9
0
+10
TRACKING
SOURCE
PREV
STOP
PLAY
NEXT
CLEAR/
C. RESET
Botón VCP
Botón DVD
DISPLAY
VCP
DVD
MODE
PLAY
Luz VCP SOURCE
VCP
STOP
DVD
SKIP
Luz DVD SOURCE
TOP MENU
Botón SOURCE
MENU
AUDIO
ENTER
SETUP
ZOOM
SUBTITLE
ANGLE
RETURN
REPEAT
A-B
MODO DVD
Pulse [DVD] en el control remoto. (Compruebe que está
encendida la luz DVD SOURCE.)
MODO VCP
Pulse [VCP] en el control remoto. (Compruebe que está
encendida la luz VCP SOURCE.)
4
Activación de la unidad por primera vez
VCP
1
Asegúrese de que la entrada de su TV esté en VIDEO
(El nombre puede cambiar según el fabricante del TV.
Consulte el manual de su TV para conocer más detalles.)
2
Seleccione su idioma la primera vez que encienda esta unidad.
Pulse [K/L] para seleccionar el idioma de pantalla, y luego pulse [B]
para salir.
SELEC. IDIOMA
STANDBY-ON
Español
✄
SOURCE
PAUSE
SEARCH
MODE
ENGLISH
FRANCAIS
o
B ESPAÑOL
[ON]
– 21 –
ES
Antes: Encienda el televisor.
Modo DVD
1
2
3
4
5
6
7
8
9
0
+10
• Para seleccionar
directamente el capítulo o
el título.
• Para seleccionar
directamente la canción.
• Para buscar en avance/
retroceso en un disco.
• Para empezar la reproducción
en avance/retroceso lento
durante el modo de pausa.
• Para buscar en avance/
retroceso en un disco.
A-B
• Para repetir entre los puntos
A y B elegidos.
• Para repetir entre los puntos
A y B elegidos.
ANGLE
• Para seleccionar los ángulos
de la cámara en un disco.
AUDIO
• Para seleccionar el idioma de
audio en un disco.
• Para seleccionar ESTÉREO,
L-ch o R-ch.
• Para borrar los marcadores.
• Para borrar los números
mal entrados.
• Para borrar el punto para la
repetición A-B.
• Para borrar los marcadores.
• Para eliminar el Nº de estado
en la entrada de programa.
• Para borrar los números
mal entrados.
• Para borrar el punto para la
repetición A-B.
• Para salir del menú SELEC.
IDIOMA.
• Para reponer el contador de
cinta.
• Para indicar el modo de disco
actual.
• Para indicar el modo de disco
actual.
• Para exhibir el contador de la
cinta actual.
• Para seleccionar el modo de
salida de DVD.
• Para activar el modo DVD.
• Para seleccionar el modo de
salida de DVD.
• Para activar el mando a
distancia en el modo DVD.
• Para mover el cursor y
determinar su posición.
• Para mover el cursor y
determinar su posición.
VCP
1
3
Inserte un
casete de vídeo
en esta unidad.
2
Para parar la
reproducción
4
STOP
La unidad
inicia la
reproducción
automáticamente.
En el modo
de parada,
extraiga el
casete.
CLEAR/
C. RESET
OPEN/CLOSE
Para reiniciar
la reproducción
DISPLAY
PLAY
DVD
6
Reproducción de DVD/CD
Antes: Encienda el televisor, amplificador
y otros equipos que puedan estar
conectados a esta unidad. Asegúrese
que el televisor y el sintoamplificador de
audio (de venta en los comercios) están
en el canal correcto.
Modo de VCP
Disco/cinta
Botón
(Orden alfavético)
ENTER
MENU
MODE
DVD
DV
• Para el avance/retroceso de
una cinta.
• Para empezar la reproducción
en avance lento durante el
modo de pausa.
• Para ajustar el
menú SELEC.
IDIOMA, BUSCA
HACIA INDICE y
BUSCA HACIA
HORA.
• Para llamar el menu en un
disco.
• Para activar/desactivar el
nivel del negro.
• Para activar/desactivar el
ambiental virtual.
• Para disponer el orden de
reproducción o la reproducción
aleatoria.
• Para activar/desactivar el
envolvente virtual.
• Para abrir o cerrar la bandeja
del disco.
• Para abrir o cerrar la bandeja
del disco.
• Para extraer el casete de
vídeo de VCP.
• Para hacer una pausa de
reproducción del disco.
• Para avanzar la reproducción
un cuadro a la vez.
• Para hacer una pausa en la
reproducción del disco.
• Para hacer una pausa en la
reproducción de la cinta.
• Para avanzar la reproducción
un cuadro a la vez.
✄
Español
5 Reproducción de VCP
OPEN/CLOSE
1
2
STANDBY-ON
Ponga un disco
con la etiqueta
hacia arriba.
OPEN/CLOSE
PAUSE
• Para empezar la reproducción
del disco.
• Para empezar la reproducción
del disco.
• Para empezar la reproducción
de la cinta.
REPEAT
• Para reproducir repetidamente
un capítulo o título.
• Para reproducir repetidamente
una canción o disco.
• Para activar/desactivar el
AUTOREPETIR.
RETURN
• Para volver a la operación
previa en el menú.
• Para volver a la operación
previa en el menú.
• Para buscar un capítulo, título
u hora.
• Para colocar o buscar los
marcadores.
• Para buscar una canción.
• Para buscar el tiempo.
• Para colocar o buscar los
marcadores.
• Para llamar el menú de
búsqueda de índice u hora.
• Para llamar el menú de
programación de DVD.
• Para llamar el menú de
programación de DVD.
• Para activar el menú SELEC.
IDIOMA.
• Para saltar capítulos o titulo.
• Para saltar canciones.
• Para encender o apagar la
unidad.
• Para encender o apagar la
unidad.
• Para encender o apagar la
unidad.
• Para parar la reproducción.
• Para parar la reproducción.
• Para parar la reproducción.
PLAY
3
Para empezar
la reproducción
4
Para parar la
reproducción
STOP
PLAY
SEARCH
MODE
SETUP
7
Control remoto
Español
STANDBY-ON
SKIP
OPEN/CLOSE
1
2
3
4
5
6
7
8
9
0
+10
VCP
DVD
STANDBY-ON
TRACKING
STOP
CLEAR/
C. RESET
DISPLAY
SUBTITLE
• Para seleccionar subtítulos en
un disco.
TOP MENU
• Para llamar el menú superior
en un disco.
MODE
PLAY
STOP
SKIP
PAUSE
TRACKING
TOP MENU
SEARCH
MODE
MENU
• Para ajustar manualmente
elseguimiento durante la
reproducción.
TRACKING
AUDIO
ENTER
SETUP
ZOOM
SUBTITLE
ANGLE
RETURN
REPEAT
• Para seleccionar el modo de
salida VCP.
• Para activar el modo VCP.
VCP
A-B
ZOOM
• Para ampliar parte de la
imagen. (x2/x4)
– 22 –
ES
✄
Quick Use Guide
1 Connections
Please refer to “Basic TV Connection” on the front page
before you use this unit.
2
Installing the Batteries for the Remote Control
1
3
2
3
DVD/VCP Switching
OPEN/CLOSE
STANDBY-ON
VCP
DVD
DISC IN
PLAY
OPEN/CLOSE
1
2
3
4
5
6
7
8
9
0
+10
TRACKING
SOURCE
PREV
STOP
PLAY
NEXT
CLEAR/
C. RESET
VCP button
DVD button
DISPLAY
VCP
DVD
MODE
PLAY
VCP SOURCE light
VCP
STOP
DVD
SKIP
DVD SOURCE light
TOP MENU
SOURCE button
SOURCE
SEARCH
MODE
MENU
PAUSE
AUDIO
ENTER
SETUP
ZOOM
SUBTITLE
ANGLE
RETURN
REPEAT
A-B
DVD MODE
Press [DVD] on the remote control. (Verify that the DVD SOURCE
light illuminates.)
VCP MODE
Press [VCP] on the remote control. (Verify that the VCP SOURCE
light illuminates.)
4
Turning on Unit for the First Time
VCP
1
Be sure your TV’s input is set to VIDEO (name may
vary with TV manufacturer. See your TV manual for
details.)
2
Select your language for the first time you turn
on this unit.
Press [K/L] to select your on-screen menu
language, then press [B] to exit.
LANGUAGE SELECT
B ENGLISH
[ON]
FRANCAIS
ESPAÑOL
STANDBY-ON
or
– 23 –
EN
Quick Use Guide
5 VCP Playback
3
2
3
4
5
6
7
8
9
0
+10
• To select chapter or title
directly.
• To select track directly.
• To search forward/backward through a disc.
• To begin slow forward/reverse
playback in the pause mode.
• To search forward/backward through a disc.
A-B
• To repeat between your
chosen point of A and B.
• To repeat between your
chosen point of A and B.
ANGLE
• To select camera angles
on a disc.
AUDIO
• To select audio languages
on a disc.
• To select STEREO, L-ch or
R-ch.
• To clear the markers.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To clear the markers.
• To remove status number
in program input.
• To clear numbers entered
incorrectly.
• To cancel the point for A-B
repeat.
• To exit the LANGUAGE
SELECT Menu.
• To reset the tape counter.
• To display the current disc
mode.
• To display the current disc
mode.
• To display the current tape
counter.
• To select DVD output
mode.
• To activate DVD mode.
• To select the DVD output
mode.
• To activate DVD mode.
• To move the cursor and
determine its position.
• To move the cursor and
determine its position.
The unit will
start playback
automatically.
2
To stop
playback
1
In stop mode,
eject the
cassette.
4
STOP
OPEN/CLOSE
To start
playback
again
CLEAR/
C. RESET
PLAY
DISPLAY
6
DVD/CD Playback
DVD
Before: Turn on the TV, amplifier
and any other components which are
connected to this unit. Make sure the
TV and audio receiver (not included) are
set to the correct channel.
DVD
DV
1
Insert a disc
with label
facing up.
2
STANDBY-ON
OPEN/CLOSE
ENTER
To start
playback
To stop
playback
4
• To call up the Menu on a
disc.
MODE
• To set black level on/off.
• To set virtual surround on/off.
• To arrange the playing
order or play randomly.
• To set virtual surround on/off.
• To open or close the disc
tray.
• To open or close the disc
tray.
• To eject the video
cassette from the VCP.
• To pause disc playback.
• To advance playback one
frame at a time.
• To pause disc playback.
• To pause tape playback.
• To advance playback one
frame at a time.
OPEN/CLOSE
7
• To begin disc playback.
• To begin disc playback.
• To begin tape playback.
REPEAT
• To play a chapter or title
repeatedly.
• To play a track or disc
repeatedly.
• To select the Auto Repeat
on/off.
RETURN
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
SEARCH
MODE
• To search chapter, title or
time.
• To set or search the markers.
• To search track.
• To search time.
• To set or search the markers.
• To call up the index or time
search menu.
SETUP
• To call up the DVD setup
menu.
• To call up the DVD setup
menu.
• To call up the LANGUAGE
SELECT Menu.
• To skip chapters or titles.
• To skip tracks.
• To turn the unit on/off.
• To turn the unit on/off.
• To turn the unit on/off.
• To stop playback.
• To stop playback.
• To stop playback.
PLAY
STOP
PLAY
Remote Control
STANDBY-ON
• To set the LANGUAGE SELECT
menu, Index and
Time Search.
MENU
PAUSE
3
• To forward/backward a tape.
• To begin slow forward
playback in the pause mode.
OPEN/CLOSE
SKIP
1
2
3
TRACKING
4
5
6
7
8
9
0
+10
VCP
DVD
STANDBY-ON
CLEAR/
C. RESET
DISPLAY
MODE
PLAY
STOP
SUBTITLE
• To select subtitles on a
disc.
TOP MENU
• To call up the Top Menu on
a disc.
STOP
SKIP
TOP MENU
SEARCH
MODE
MENU
PAUSE
AUDIO
ENTER
TRACKING
SETUP
ZOOM
SUBTITLE
ANGLE
TRACKING
• To adjust the tracking
manually during playback.
RETURN
REPEAT
A-B
VCP
ZOOM
Printed in China
• To select the VCP output mode.
• To activate VCP mode.
• To magnify part of a picture.
(x2/x4)
E8E60UD /E8E61UD
1VMN23364 ★★★★★
✄
VCP
Insert a video
cassette into
this unit.
VCP mode
Button
(Alphabetical order)
Before: Turn on the TV.
1
DVD mode
Disc/Tape
Download PDF

advertising