Owner`s manual | FUNAI DVD3315V DVD VCR Combo User Manual

PRECAUTIONS
Owner’s Manual
Manual del Usuario
PREPARATION
DVD3315V
BASIC OPERATIONS
DVD/CD Player
with Video Cassette Recorder
ADVANCED PLAYBACK
RECORDING
OPTIONAL SETTINGS
VCR
VIDEO
STANDBY-ON REW
F.FWD STOP/EJECT
PLAY
DVD
DISC IN
PLAY
TIMER REC
RECORD
SOURCE
IR
PREV
STOP
PLAY
NEXT
AUDIO
TRACKING
DVD PLAYER / VCR
TROUBLESHOOTING
OPEN/
CLOSE
REC
INFORMATION
© 2009 Funai Electric Co., Ltd.
E8KKSUD_DVD3315V_EN_v1.indd 1
2009/05/27 13:19:58
PRECAUTIONS
PRECAUTIONS
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.
Model No.:
Serial No.:
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
apparatus’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear or bottom of the cabinet.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus.
Important Safeguards
1. READ INSTRUCTIONS - All the safety and operating instructions should be
read before the apparatus is operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be
retained for future reference.
3. HEED WARNINGS - All warnings on the apparatus and in the operating
instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be
followed.
5. CLEANING - Unplug this apparatus from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
EXCEPTION: An apparatus that is meant for uninterrupted service and, that
for some specific reason, such as the possibility of the loss of an authorization
code for a CATV converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference to unplugging the
apparatus in the cleaning description otherwise required in item 5.
6. ATTACHMENTS - Do not use attachments not recommended by the
apparatus manufacturer as they may cause hazards.
7. WATER AND MOISTURE - Do not use this apparatus near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, and the like.
8. ACCESSORIES - Do not place this apparatus on an unstable
cart, stand, tripod, bracket, or table. The apparatus may fall,
causing serious injury to someone, and serious damage to
the apparatus. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
apparatus. Any mounting of the apparatus should follow
the manufacturer’s instructions and should use a mounting accessory
recommended by the manufacturer. An apparatus and cart combination
should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the apparatus and cart combination to overturn.
AMEUBLES - Cet appareil ne doit être placé que sur un meuble (avec
ou sans roulettes) recommandé par le fabricant. Si vous l’installez sur un
meuble à roulettes, déplacez les deux ensembles avec précaution. Un
arrêt brusque, l’utilisation d’une force excessive et des surfaces irrégulières
risquent de déstabiliser l’ensemble et de le renverser.
9. VENTILATION - Slots and openings in the cabinet and the back or bottom are
provided for ventilation and to ensure reliable operation of the apparatus and
to protect it from overheating, these openings must not be blocked or covered.
The openings should never be blocked by placing the apparatus on a bed, sofa,
carpet, rug, or other similar surface. This apparatus should never be placed
near or over a radiator or heat register. This apparatus should not be placed
in a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been adhered to.
10. POWER SOURCES - This apparatus should be operated only from the type
of power source indicated on the marking label. If you are not sure of the
type of power supply to your home, consult your apparatus dealer or local
power company. For the apparatus’s intended to operate from battery
power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION - This apparatus is equipped with a
polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed upon
or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the apparatus.
13. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable
system is connected to the apparatus, be sure the antenna or cable system
is grounded so as to provide some protection against voltage surges and
built-up static charges. Article 810 of the National Electrical Code, ANSI/
2
E8KKSUD_DVD3315V_EN_v1.indd 2
NFPA No. 70, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
14. LIGHTNING - For added protection for this apparatus receiver during a
lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the apparatus due to lightning and
power-line surges.
15. POWER LINES - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light of power circuits, or
where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
16. OVERLOADING - Do not overload wall outlets and extension cords as this
can result in a risk of fire or electric shock.
17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this
apparatus through openings as they may touch dangerous voltage points
or short out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the apparatus.
18. SERVICING - Do not attempt to service this apparatus yourself as opening
or removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE - Unplug this apparatus from the wall
outlet and refer servicing to qualified service personnel under the following
conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the apparatus.
c. If the apparatus has been exposed to rain or water.
d. If the apparatus does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the apparatus to its normal operation.
e. If the apparatus has been dropped or damaged in any way.
f. When the apparatus exhibits a distinct change in performance, this
indicates a need for service.
20. REPLACEMENT PARTS - When replacement parts are required, be sure the
service technician uses replacement parts specified by the manufacturer that
have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, injury to persons or other hazards.
21. SAFETY CHECK - Upon completion of any service or repairs to this
apparatus, ask the service technician to perform routine safety checks to
determine that the apparatus is in proper operating condition.
22. HEAT - This apparatus should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers) that
produce heat.
EN
2009/05/27 13:19:59
EN
PRECAUTIONS
PRECAUTIONS
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’au fond.
PREPARATION
FCC WARNING
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause
harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority
to operate this apparatus if an unauthorized change or modification is made.
BASIC OPERATIONS
RADIO-TV INTERFERENCE
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference
to radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the apparatus and receiver.
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
ADVANCED PLAYBACK
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the
grounding system of the building as close to the point of cable entry as practical.
RECORDING
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
TRADEMARK INFORMATION
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
is a trademark of DVD Format/Logo Licensing
•
Corporation.
LOCATION AND HANDLING
• Do not install the unit in direct sunlight, near strong
magnetic fields, or in a place subject to dust or strong
vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position.
Do not place anything directly on top or bottom of
the unit. Depending on your external devices, noise
or disturbance of the picture and/or sound may be
generated if the unit is placed too close to them. In this
case, please ensure enough space between the external
devices and the unit.
• Depending on the environment, the temperature of this
unit may increase slightly. This is not a malfunction.
DEW CONDENSATION WARNING
• Dew condensation may form inside the unit in the
following conditions. If so, do not use this unit at least
for a few hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
E8KKSUD_DVD3315V_EN_v1.indd 3
NOTE ABOUT RECYCLING
• This unit’s packaging materials are recyclable
and can be reused. Please dispose of any
materials in accordance with your local
recycling regulations.
• Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
INFORMATION
EN
TROUBLESHOOTING
EN
TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from an AC outlet. Grasp it by the plug.
• Do not put your fingers or objects into the unit.
OPTIONAL SETTINGS
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
3
2009/05/27 13:19:59
PREPARATION
PREPARATION
Contents
PRECAUTIONS
ADVANCED PLAYBACK
Important Safeguards · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2
Disc Menu · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Calling Up a Menu Screen During Playback · · · · · · · · ·
Resume Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
MP3 Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Zoom · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Camera Angles · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Stereo Sound Mode · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Title, Chapter, Track, Folder or File Search · · · · · · · · · ·
Index Search · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Time Search · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Repeat Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Repeat A-B Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Auto Repeat Playback· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Programmed Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Random Playback· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Settings· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Black Level Setting· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Virtual Surround · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Subtitle Language and Audio Language · · · · · · · · · · · ·
On-Screen Display · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
PREPARATION
Supplied Accessories · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4
About Cassette Tapes and Discs · · · · · · · · · · · · · · · · · · · 5
Playable Media · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5
Unplayable Disc · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5
Region Code · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5
Color System · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 5
Function Overview · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6
Remote Control · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 6
Front Panel · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 8
Rear Panel · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 9
Installing the Batteries for the Remote Control · · · · · · 9
Connections · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10
Connection to a TV · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 10
Connection to an Audio System · · · · · · · · · · · · · · · · · · · · 12
Initial Setups · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 13
Turning on Unit for the First Time · · · · · · · · · · · · · · · · · · 13
Clock Setting · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 13
BASIC OPERATIONS
For VCR Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 14
For Disc Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 14
Hint for Disc Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 15
Fast Forward / Fast Reverse Playback · · · · · · · · · · · · · · · 15
Still Mode / Step-by-step Playback · · · · · · · · · · · · · · · · · 15
Slow Forward Playback · · · · · · · · · · · · · · · · · · · · · · · · · · · · 15
To Skip the Titles, Chapters, Tracks, or Files · · · · · · · · · 15
To Reset the Cassette Tape Counter (Counter Reset) · · 15
To Rewind the Cassette Tape automatically
(Auto Rewind) · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 15
16
16
16
16
16
16
16
16
17
17
17
17
17
18
18
18
18
18
19
19
RECORDING
Recording & OTR (One-touch Timer Recording) · · · · ·
Timer Recording · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Note for Timer Recording & OTR · · · · · · · · · · · · · · · · · · ·
Satellite Link · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Dubbing a Cassette Tape · · · · · · · · · · · · · · · · · · · · · · · · · ·
20
21
21
22
22
OPTIONAL SETTINGS
Changing the DVD Settings (in the setup menu) · · · 23
PARENTAL Setting · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 24
INITIALIZE · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 25
TROUBLESHOOTING
Troubleshooting Guide · · · · · · · · · · · · · · · · · · · · · · · · · · 26
INFORMATION
Maintenance · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 27
Specifications · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 27
LIMITED WARRANTY · · · · · · · · · · · · · · · · · · · · · back cover
Supplied Accessories
remote control
(NB680UD)
RCA audio/video cables
(WPZ0102TM018 / WPZ0102LTE01)
owner’s manual
(1VMN27753)
batteries
(AA x 2)
4
E8KKSUD_DVD3315V_EN_v1.indd 4
Owner’s Manual
© 2009 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced,
copied, transmitted, disseminated, transcribed, downloaded or
stored in any storage medium, in any form or for any purpose
without the express prior written consent of Funai. Furthermore,
any unauthorized commercial distribution of this manual or any
revision hereto is strictly prohibited.
Information in this document is subject to change without
notice. Funai reserves the right to change the content herein
without the obligation to notify any person or organization of
such changes.
with the
design is a registered trademark of Funai
Electric Co., Ltd and may not be used in any way without the
express written consent of Funai. All other trademarks used
herein remain the exclusive property of their respective owners.
Nothing contained in this manual should be construed as
granting, by implication or otherwise, any license or right to use
any of the trademarks displayed herein. Misuse of any trademarks
or any other content in this manual is strictly prohibited. Funai
shall aggressively enforce its intellectual property rights to the
fullest extent of the law.
EN
2009/05/27 13:20:00
EN
PREPARATION
PRECAUTIONS
About Cassette Tapes and Discs
Playable Media
Media Type
DVDVIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-DA
CD-RW
CD-R
Cassette
Tape
PREPARATION
Logo
DVD-Video
Recorded
Signal
digital video (MPEG2)
Audio CD
MP3
MP3
digital audio or MP3
VHS
BASIC OPERATIONS
Symbols used
in this manual
analog
video
Unplayable Disc
•
•
•
•
•
DVD-RAM
DVD-audio
CD-i
photo CD
video CD
•
•
•
•
•
ADVANCED PLAYBACK
Caution: Never play the following discs.
DVD with region codes other than 1 or ALL
• HD DVD
DTS-CD
• Blu-ray disc
DVD-ROM for personal computers
CD-ROM for personal computers
the discs with labels, scratches, stains, blemishes, etc.
Caution: The sound may not be heard on the following disc.
• super audio CD
RECORDING
Note: • Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super
audio CD layer cannot be delivered.
Any other discs without compatibility indications
Note: • Unfinalized discs cannot be played back.
Region Code
EN
E8KKSUD_DVD3315V_EN_v1.indd 5
DVD is recorded in different color systems throughout the
world. The most common color system is NTSC (which is
used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be
recorded in the NTSC system. You cannot play back DVD
recorded in PAL color systems.
INFORMATION
EN
Color System
TROUBLESHOOTING
This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols
on your DVD. If these region symbols do not
appear on your DVD, you cannot play back the
DVD in this unit.
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only be played
back on the unit with the same region code.
OPTIONAL SETTINGS
• For DVD-RW/R, discs recorded in the VR (video recording) format cannot be played back. Only the finalized video
format discs can be played back.
• Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or
special properties of discs.
• You can play back discs which bear the marks listed in “Playable Media”. If you use nonstandardized discs, this
unit may not play them back. Even if they are played back, the sound or video quality will be compromised.
• If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back
properly.
5
2009/05/27 13:20:00
PREPARATION
Function Overview
Remote Control
Button names described in the Owner’s Manual
The instructions in this manual rest primarily on the premise that you will operate on the remote control (Please be
informed that some operations can only be made on the front panel of the unit).
1
2
3
VCR mode:
• Press to exit the VCR menu.
STANDBY-ON
SPEED
TIMER SET
Pulse para salir del menú de VCR.
OPEN/CLOSE
18
• Press to reset the cassette tape counter.
Pulse para restaurar el contador del casete.
7
11
5
3
4
5
6
7
8
9
CLEAR
DISPLAY
INPUT
0
+10
VCR
DVD
8
9
10
12
13
15
2
TRACKING
4
6
1
14
16
MODE
STOP
RECORD
TITLE
PREV
21
22
25
NEXT
SEARCH
DISC MENU
19
24
PLAY
PAUSE
AUDIO
27
28
OK
SETUP
ZOOM
SUBTITLE
ANGLE
RETURN
REPEAT
A-B
17
6. DISPLAY ¬p.19
DVD mode:
• Press to display the current disc mode.
30
31
32
20
23
Pulse para visualizar el modo de disco actual.
VCR mode:
• Press to display the current time, cassette tape
counter, and L1 / L2.
Pulse para visualizar la hora actual, el contador del casete y L1 o L2.
7. VCR
(VCR) ¬p.13
• Press to activate VCR mode.
Pulse para activar el modo de VCR.
26
29
8. E / D ¬p.15
DVD mode:
• Press to search forward / backward through a disc.
Pulse para buscar hacia adelante o hacia atrás en el disco.
• Press [D] to begin slow forward playback in the
pause mode. (DVD)
Pulse [ D] para iniciar la reproducción lenta hacia adelante en el
modo pausa. (DVD)
33
VCR mode:
• Press to forward / backward a cassette tape.
Pulse para adelantar o retroceder un casete.
• Press [D] to begin slow forward playback in the
pause mode.
Pulse [ D] para iniciar la reproducción lenta hacia adelante en el
modo pausa.
9. PREV H (DVD) ¬p.15
• Press to go back to the previous chapters / titles.
(DVD)
Pulse para volver a los capítulos o títulos anteriores. (DVD)
1. TIMER SET (VCR) ¬p.21
• Press to put the VCR into standby mode for a timer
recording.
Pulse para colocar el VCR en modo espera para una grabación
con temporizador.
2. SPEED (VCR) ¬p.20
• Press to select the recording speed.
Pulse para seleccionar la velocidad de grabación.
3. STANDBY-ON ¬p.13
• Press to turn the unit ON / OFF.
Pulse para encender o apagar la unidad.
4. Number buttons (DVD) ¬p.16
• Press to select chapter / title (DVD), track (CD), or
folder / file (MP3) directly.
Pulse para seleccionar un capítulo o título (DVD), pista (CD), o
carpeta o archivo (MP3) directamente.
5. CLEAR ¬p.13
DVD mode:
• Press to clear numbers entered incorrectly. (DVD,
CD, MP3)
Pulse para borrar los números ingresados incorrectamente.
(DVD, CD, MP3)
• Press to cancel the point for A-B repeat. (DVD, CD,
MP3)
Pulse para cancelar el punto para repetición de A-B. (DVD, CD, MP3)
• Press to go back to the previous tracks (CD) / files
(MP3).
Pulse para volver a las pistas (CD) o archivos (MP3) anteriores.
10. RECORD (VCR) ¬p.20
• Press to start recording or press repeatedly to
activate the One-touch Timer Recording.
Pulse para comenzar a grabar o pulse reiteradamente para activar
la grabación rápida con temporizador.
11. SEARCH ¬p.16
DVD mode:
• Press to search chapter / title (DVD).
Pulse para buscar un capítulo o título (DVD).
• Press to search track (CD), or folder / file (MP3).
Pulse para buscar una pista (CD), carpeta o archivo (MP3).
• Press to search time (DVD, CD).
Pulse para buscar la hora (DVD, CD).
VCR mode:
• Press to call up the index or time search menu.
Pulse para visualizar el menú de búsqueda de hora o el índice.
12. TITLE (DVD) ¬p.16
• Press to call up the top menu on disc. (DVD)
Pulse para visualizar el menú principal del disco. (DVD)
13. DISC MENU (DVD) ¬p.16
• Press to call up the disc menu on a disc. (DVD)
Pulse para visualizar el menú del disco en un disco. (DVD)
• Press to clear all the tracks entered for
programmed playback. (DVD, CD, MP3)
6
Pulse para borrar todas las pistas ingresadas para la
reproducción programada. (DVD, CD, MP3)
E8KKSUD_DVD3315V_EN_v1.indd 6
EN
2009/05/27 13:20:03
EN
PREPARATION
Pulse para visualizar el menú de DVD.
VCR mode:
• Press to call up the VCR menu.
Pulse para visualizar el menú de VCR.
Pulse para amplificar parte de una imagen. (2x, 3x, 4x ó 1/2x) (DVD)
16. SUBTITLE (DVD) ¬p.19
• Press to select subtitles on a disc. (DVD)
Pulse para seleccionar subtítulos en un disco. (DVD)
Pulse para seleccionar ángulos de la cámara en un disco. (DVD)
18. OPEN/CLOSE A ¬p.14
DVD mode:
• Press to open or close the disc tray.
Pulse para abrir o cerrar la bandeja del disco.
Presiónelo para retirar la cinta de video del compartimiento del
casete.
19. TRACKING o/ p (VCR) ¬p.15
• Press either one of the buttons to stabilize the
picture manually if the picture begins to vibrate
vertically during the still mode.
Pulse cualquiera de los botones para estabilizar la imagen de
forma manual si ésta comienza a vibrar de forma vertical durante
el modo pausa.
Pulse para cambiar un título, capítulo, pista, carpeta o número de
archivo de 10 por vez.
21. INPUT (VCR) ¬p.20
• Press to select input “L1” / “L2”.
Pulse para seleccionar entrada “L1” o “L2”.
Pulse para apagar o encender sonido envolvente virtual.
• Press to set black level ON / OFF. (DVD)
Pulse para apagar o encender nivel de negro. (DVD)
• Press to arrange the playing order or to perform
random playback. (DVD, CD, MP3)
Pulse para organizar el orden de reproducción o para ejecutar la
reproducción aleatoria. (DVD, CD, MP3)
Pulse para activar el modo de DVD.
24. PLAY B ¬p.14
• Press to begin the playback of a disc / a cassette
tape.
Pulse para comenzar la reproducción de un disco o casete.
28. AUDIO (DVD) ¬p.19
• Press to select audio languages on a disc. (DVD)
Pulse para seleccionar idiomas de audio en un disco. (DVD)
• Press to select “STEREO” / “L-ch” / “R-ch”. (CD)
Pulse para seleccionar “STEREO”, “L-ch” o “R-ch”. (CD)
29. OK (DVD) ¬p.16
• Press to confirm the items.
Pulse para confirmar los ítems.
30. K / L / s / B ¬p.16
DVD mode:
• Press to select items / settings.
Pulse para seleccionar ítems o ajustes.
VCR mode:
K/L:
• Press to select an item on the VCR menu.
Pulse para seleccionar un ítem en el menú de la VCR.
s:
• Press to go back one step during clock and timer
programming.
Pulse para retroceder un paso durante la programación del reloj y
el temporizador.
B:
• Press to proceed to the next VCR menu.
Pulse para ir al siguiente menú de VCR.
31. RETURN
(DVD) ¬p.18
• Press to return to the previous operation in menu.
Pulse para volver a la operación anterior en el menú.
32. A-B (DVD) ¬p.17
• Press to repeat between your chosen point of A and
B. (DVD, CD, MP3)
Pulse para repetir entre los puntos de A y B que seleccionó. (DVD,
CD, MP3)
33. REPEAT ¬p.17
DVD mode:
• Press to play back a chapter / title repeatedly. (DVD)
Pulse para reproducir un capítulo o título reiteradamente. (DVD)
• Press to play back a track / disc repeatedly. (CD)
Pulse para reproducir una pista o disco reiteradamente. (CD)
• Press to play back a file / folder / disc repeatedly.
(MP3)
TROUBLESHOOTING
23. DVD (DVD) ¬p.14
• Press to activate DVD mode.
Pulse para avanzar la reproducción un cuadro por vez.
OPTIONAL SETTINGS
22. MODE (DVD) ¬p.18
• Press to set virtual surround ON / OFF.
Pulse para pausar la reproducción o grabación de un casete.
• Press to advance the playback one frame at a time.
RECORDING
20. +10 (DVD)
• Press to change title / chapter / track / folder / file
number by 10 at a time.
Pulse para avanzar la reproducción un cuadro por vez. (DVD).
VCR mode:
• Press to pause the playback / recording of a cassette
tape.
ADVANCED PLAYBACK
VCR mode:
• Press to remove the videotape from the cassette
compartment.
Pulse para pausar la reproducción del disco.
• Press to advance the playback one frame at a time.
(DVD)
BASIC OPERATIONS
17. ANGLE (DVD) ¬p.16
• Press to select camera angles on a disc. (DVD)
27. PAUSE F ¬p.15
DVD mode:
• Press to pause disc playback.
PREPARATION
15. ZOOM (DVD) ¬p.16
• Press to magnify part of a picture. (2x, 3x, 4x or 1/2x)
(DVD)
PRECAUTIONS
14. SETUP ¬p.23
DVD mode:
• Press to call up the DVD menu.
Pulse para reproducir un archivo, carpeta o disco reiteradamente.
(MP3)
VCR mode:
• Press to select the repeat mode ON / OFF.
Pulse para encender o apagar el modo de repetición.
25. STOP C ¬p.14
DVD mode:
• Press to stop disc playback.
INFORMATION
Pulse para detener la reproducción del disco.
VCR mode:
• Press to stop the playback / recording of a cassette tape.
Pulse para detener la reproducción o grabación de un casete.
26. NEXT G (DVD) ¬p.15
• Press to skip chapters / titles. (DVD)
Pulse para saltar capítulos o títulos. (DVD)
• Press to skip tracks (CD) / files (MP3).
Pulse para saltar pistas (CD) o archivos (MP3).
EN
EN
E8KKSUD_DVD3315V_EN_v1.indd 7
7
2009/05/27 13:20:05
PREPARATION
Front Panel
12
3
4 5
6 7 8
9 10
11
OPEN/
CLOSE
VCR
REC
VIDEO
STANDBY-ON REW
F.FWD STOP/EJECT
PLAY
DVD
DISC IN
PLAY
TIMER REC
RECORD
SOURCE
IR
PREV
STOP
PLAY
NEXT
AUDIO
TRACKING
12
13 14 15 16 17 18
19
20
DVD PLAYER / VCR
21 22 23 24 25
L2 input jacks
1. STANDBY-ONy ¬p.14
• Press to turn on / off the unit.
2. Power on indicator
• Lights up when the unit is turned on.
3. cassette compartment (VCR) ¬p.14
• Insert a cassette tape here.
4. REC indicator (VCR)
• Lights up during a recording, OTR (One-touch Timer
Recording) or timer recording.
• Blinks when a recording is paused.
5. TIMER REC indicator (VCR) ¬p.21
• Lights up when a timer recording or OTR (One-touch
Timer Recording) has been set.
• Blinks when a timer recording or OTR (One-touch
Timer Recording) has been finished or if the unit
could not complete the recording due to some error.
6. OPEN/CLOSE A (DVD) ¬p.14
• Press to open / close the disc tray.
7. VCR output indicator (VCR)
• Lights up when the unit is in the VCR mode.
8. DVD output indicator (DVD)
• Lights up when the unit is in the DVD mode.
9. DISC IN indicator (DVD)
• Lights up when the disc is in the disc tray.
10. PLAY indicator (DVD)
• Lights up when the inserted disc is being played
back.
• Blinks when an unplayable disc is inserted.
11. Disc tray (DVD) ¬p.14
• Place a disc when it is open.
12. VIDEO IN jack (VCR) ¬p.22
• Connect an RCA video cable from the video output
jack of your camcorder and other such devices here.
13. AUDIO IN jack (VCR) ¬p.22
• Connect an RCA monaural audio cable from the
audio output jack of your camcorder and other such
devices here.
14. REW E (VCR) ¬p.15
• Press to rewind the cassette tape or to view the
picture rapidly in reverse during playback (rewind
search).
15. F.FWD D (VCR) ¬p.15
• Press to rapidly advance the cassette tape or view
the picture rapidly in forward during playback
(forward search).
8
E8KKSUD_DVD3315V_EN_v1.indd 8
16. STOP C / EJECT A (VCR) ¬p.14
STOP C :
• Press to stop the playback / recording of a cassette
tape.
EJECTA :
• Press to remove the cassette tape from the cassette
compartment.
17. PLAY B (VCR) ¬p.14
• Press to start the playback of a cassette tape.
18. RECORD I (VCR) ¬p.20
• Press once to start a recording.
• Press repeatedly to activate an OTR (One-touch
Timer Recording).
19. infrared sensor window ¬p.9
• Receive signals from the remote control so that you
can control the unit from a distance.
20. TRACKING o/ p (VCR) ¬p.15
• Press either one of the buttons to stabilize the
picture if the picture begins to vibrate vertically
during the cassette tape playback.
21. SOURCE
• Press to switch to either DVD / VCR mode.
22. PREV H (DVD) ¬p.15
• Press to go back to the previous chapters / titles /
tracks / files during playback.
• Press and hold it to begin fast reverse search.
23. STOP C (DVD) ¬p.14
• Press once to stop disc playback temporarily.
24. PLAY B (DVD) ¬p.14
• Press to start / resume playback.
25. NEXT G (DVD) ¬p.15
• Press to skip chapters / titles / tracks / files during
playback.
• Press and hold it to begin fast forward search.
Note: • You can turn on the unit by pressing the buttons
6 or 24 (circled ones) or by inserting a cassette
tape.
• If you turn off this unit, [OPEN/CLOSE A] on the
remote control is not available. Be sure to use
[OPEN/CLOSE A] or [STOP/EJECT C A] on the
unit.
EN
2009/05/27 13:20:06
EN
PREPARATION
PRECAUTIONS
Rear Panel
1
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
DVD/VCR
S-VIDEO
OUT
AUDIO OUT
Y
L
CB
R
AUDIO IN
L
COAXIAL
VCR
PREPARATION
COMPONENT
VIDEO OUT
2
VIDEO OUT
R
L1
VIDEO IN
CR
3 4 5 6 7 8
BASIC OPERATIONS
7. DVD/VCR VIDEO OUT jack ¬p.10
• Connect an RCA video cable from here to the
VIDEO input jack of your television or audio device.
Standard connection for DVD/VCR use.
8. VCR VIDEO IN jack ¬p.22
• Connect an RCA video cable from here to the video
output jack of your camcorder, VCR, etc.
ADVANCED PLAYBACK
* For enhanced DVD viewing. DVD/VCR video and audio
connection required to view cassette tapes.
Note: • RCA audio and video cables are included for
both VCR and DVD viewing. You can enhance
your DVD picture and sound quality with an
S-video cable, component video cables, or a
digital audio coaxial cable. Please purchase
the necessary cables at your local store.
(Refer to pages 11-12.)
RECORDING
1. DVD/VCR AUDIO OUT jack ¬p.10
• Connect an RCA audio cable from here to the audio
input jack of your television or audio device. Standard
connection for DVD/VCR use.
2. VCR AUDIO IN jack ¬p.22
• Connect an RCA audio cable from the audio output
jack of your camcorder, VCR, etc. to here.
3. DIGITAL AUDIO OUT COAXIAL* jack ¬p.12
• Connect a digital audio coaxial cable from here
to the digital audio coaxial in jack of a decoder or
audio receiver.
4. DVD AUDIO OUT* (analog) jack ¬p.11
• Connect an RCA audio cable from here to the audio
input jack of your television or audio device.
5. S-VIDEO OUT* jack ¬p.11
• Connect an S-video cable from here to the S-video
input jack of your television.
6. COMPONENT VIDEO OUT* jack ¬p.11
• Connect component video cables from here to the
component video input jacks of your television.
Installing the Batteries for the Remote Control
30˚
OPTIONAL SETTINGS
Install the batteries (AA x 2) matching the polarity
indicated inside battery compartment of the remote
control.
30˚
16 feet (5m)
16 feet (5m)
23 feet (7m)
TROUBLESHOOTING
Caution: Never throw batteries into a fire.
EN
EN
E8KKSUD_DVD3315V_EN_v1.indd 9
Note: • Do not mix different types of batteries together
(e.g., Alkaline and Carbon-Zinc) or old batteries
with fresh ones. Although they may look similar,
different batteries may have different voltages.
• If the remote control is not to be used for a long
period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
• Do not try to recharge batteries; they can
overheat and rupture.
• Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
INFORMATION
Keep the following in mind when using the remote
control:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
• The maximum operable ranges of the unit are:
- Line of sight: approx. 23 feet (7m)
- Either side of center:
approx. 16 feet (5m) within 30°
- Above:
approx. 16 feet (5m) within 15°
- Below:
approx. 10 feet (3m) within 30°
9
2009/05/27 13:20:06
To audio L To audio R To video
input jack input jack input jack
(White)
PREPARATION
(White)
(Red)
(Yellow)
(Red)
Connections
(Yellow)
Connection to a TV
If Your TV Has Antenna in Jack Only
Before connecting, make sure the powers of the devices are turned off.
this unit
TV
DVD
AUDIO
OUT
DIGITAL
AUDIO OUT
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO OUT
Y
L
CB
R
AUDIO IN
L
COAXIAL
VHF / UHF
antenna
VCR
VIDEO OUT
R
VIDEO IN
CR
DIGITAL
AUDIO OUT
D
A
DVD/VCR
L
L
To audio R
output jack
To audio L
output jack
(White)
AUDIO IN
B
COAXIAL
VCR
AUDIO OUT
R
CR
ANT. IN
cable TV company
RF coaxial
cable
RF coaxial cable
RF modulator (not supplied)
(Red)
VIDEO OUT
R
or
RCA
audio cable
VIDEO IN
(Yellow)
To video
output jack
RCA video cable
TO TV
rear of your RF modulator
(not supplied)
3
4
CHANNEL
L
R
AUDIO IN
VIDEO IN
ANT. INv
Set channel
3 or 4
(White)
To audio L
input jack
(Red)
(Yellow)
To audio R
input jack
To video
input jack
After making the connection illustrated above;
1) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.
2) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.
Note: • The quality of picture may become poor if this unit is connected to an RF modulator.
VCR and Basic DVD Connection
this unit
TV
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO OUT
Y
L
AUDIO IN
L
CB
COAXIAL
VCR
R
VIDEO OUT
R
VIDEO IN
CR
DIGITAL
AUDIO OUT
D
A
DVD/VCR
VCR
AUDIO OUT
L
CB
R
To video
output jack
RCA audio cable
AUDIO IN
L
COAXIAL
(White)
To audio L
output jack
CR
R
(Red)
VIDEO OUT
VIDEO IN
To audio L To audio R To video
input jack input jack input jack
(White)
(Red)
(Yellow)
L
R
VIDEO
IN
To audio R
output jack
(Yellow)
RCA video cable
AUDIO IN
Note: • Connect this unit directly to your TV. If an RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
10
EN
(White)
E8KKSUD_DVD3315V_EN_v1.indd 10
(Red)
(Yellow)
2009/05/27 13:20:07
EN
PREPARATION
PRECAUTIONS
After connecting to your TV:
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.
Please refer to your TV’s owner’s manual for details.
Input modes for common TV brands:
Listed below are inputs for common brand name TV’s.
KENWOOD:
LXI-Series:
Magnavox:
Panasonic:
RCA:
AUX
00
AUX CHANNEL
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91,
92, 93
Samsung:
SANYO:
SHARP:
SONY:
TOSHIBA:
Zenith:
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
PREPARATION
Admiral:
AUX
Curtis Mathis: LINE1, LINE2,
00, 90, 91, 92, 93
GE:
INPUT, TV/VCR, 00, 90, 91,
92, 93
HITACHI:
INPUT, AUX
JVC:
VIDEO, VIDEO1, VIDEO2,
VIDEO3
TV
this unit
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO OUT
Y
L
CB
COAXIAL
VCR
AUDIO IN
L
Basic Audio Connection
BASIC OPERATIONS
Available on DVD Only
R
VIDEO OUT
R
VIDEO IN
CR
L
R
AUDIO IN
To audio L
input jack
To audio R
input jack
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
DVD/VCR
(Red)
(White)
To audio L
output jack
(White)
COAXIAL
RCA audio cable
(Red)
NT
UT
AUDIO OUT
Y
L
CB
R
VCR
ADVANCED PLAYBACK
A
U
D
I
O
AUDIO IN
L
R
VIDEO OUT
VIDEO IN
DVD/VCR
VCR
CR
To audio R
output jack
Good Picture
S-VIDEO IN
To S-video
input jack
DIGITAL
AUDIO OUT
S-video cable
DVD
AUDIO
OUT
S-VIDEO
OUT
COAXIAL
AUDIO OUT
Y
L
AUDIO IN
CB
R
R
VIDEO OUT
VIDEO IN
DVD/VCR
VCR
OPTIONAL SETTINGS
To S-videoL
output jack
COMPONENT
VIDEO OUT
RECORDING
and
CR
or
Better Picture
COMPONENT
VIDEO IN
Y
To component
video Y output jack
To component
video Y input jack
(Green)
CB
(Blue)
CR
(Red)
DIGITAL
AUDIO OUT
To component
DVD
AUDIO S-VIDEO
OUT
(Green)OUT
video CB output jack
component video cable
To component
video CB input jack
To component
video CR output jack
AUDIO OUT
Y
L
CB
R
AUDIO IN
L
(Blue)
R
(Red)
VIDEO OUT
VIDEO IN
CR
INFORMATION
To component
video CR input jack
COAXIAL
COMPONENT
VIDEO OUT
TROUBLESHOOTING
V
I
D
E
O
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
EN
EN
E8KKSUD_DVD3315V_EN_v1.indd 11
11
2009/05/27 13:20:09
PREPARATION
Connection to an Audio System
Playing Analog Audio
this unit
analog audio
input jacks
stereo system
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
Y
L
AUDIO IN
L
CB
AUDIO IN
L
R
COAXIAL
(White)
R
VIDEO OUT
R
VIDEO IN
To audio L
output jack
CR
TAL
O OUT
To audio R
input jack
To audio L
input jack
VCR
AUDIO OUT
DVD
AUDIO
OUT
DVD/VCR
S-VIDEO
OUT
AUDIO OUT
Y
L
CB
R
(White)
(Red)
or
(Red)
(White)
COAXIAL
VIDEO OUT
R
(Red)
VCR
AUDIO IN
L
RCA audio cable
COMPONENT
C
VIDEO OUT
VIDEO IN
CR
To audio R
output jack
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Playing Digital Audio
Dolby Digital decoder
digital audio receiver
this unit
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL
VCR
AUDIO OUT
Y
L
CB
R
AUDIO IN
L
VIDEO OUT
R
VIDEO IN
CR
digital audio
input jack
digital audio input jack
DIGITAL AUDIO
COAXIAL IN
or
DIGITAL AUDIO
COAXIAL IN
To coaxial
input jack
To coaxial
input jack
DVD
DIGITAL
AUDIO OUT
To coaxial
output jack
PCM
BITSTREAM
OUT
DVD/VCR
OUT
NT
T
AUDIO OUT
Y
L
CB
R
AUDIO IN
L
COAXIAL
VCR
VIDEO OUT
R
VIDEO IN
CR
digital audio coaxial cable
* You must select “BITSTREAM” or “PCM” in “DOLBY DIGITAL” setting. (Refer to page 23.)
Audio recording format of the disc
Dolby Digital
DVD-video
LPCM
“Dolby Digital” setting of this unit
Actual output
PCM
2channel PCM
BITSTREAM
Dolby Digital
PCM
BITSTREAM
2channel PCM
Note: • The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
12
E8KKSUD_DVD3315V_EN_v1.indd 12
EN
2009/05/27 13:20:10
EN
PREPARATION
PRECAUTIONS
Initial Setups
Turning on Unit for the First Time
Press
VCR
Clock Setting
first.
Press
VCR
first.
1
2
Be sure your TV’s input is set to VIDEO. (Name may
vary with TV manufacturer. See your TV manual for
details.)
1
SETUP
Press
and use
/
to select “CLOCK SET”.
to go to next step.
Then press
-MENUTIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT [OFF]
B CLOCK SET
LANGUAGE SELECT
STANDBY-ON
Press
PREPARATION
Please note: most instructions in this manual refer to
remote control use.
.
BASIC OPERATIONS
• “LANGUAGE SELECT” menu appears.
3
Use
/
Then press
• If the clock is not set yet, the “CLOCK SET” menu
to select your on-screen language.
to continue.
LANGUAGE SELECT
B ENGLISH
[ON]
FRANCAIS
SETUP
appears when you press
2
ESPAÑOL
to select the contents to suit your
to go to the next item.
ADVANCED PLAYBACK
Use
/
preference.
Then press
. In this case, go to step 2.
CLOCK SET
4
To Change the Selected On-screen Language
1
3
Press
SETUP
3
Use
/
to select “AM” or “PM”.
MONTH DAY
10 / 07
HOUR MINUTE
05 : 40
to select “LANGUAGE SELECT”.
to go to next step.
Use
/
“ESPAÑOL”.
Then press
to select “ENGLISH”, “FRANCAIS” or
CLEAR
.
need English:
Press [SETUP] and choose “SELEC. IDIOMA”
or “SELECTION LANGUE”. Press [B] and select
“ENGLISH”. Finally, press [CLEAR].
4
Press
SETUP
YEAR
TUE 2 0 0 8
AM/PM
P M AM
B PM
to exit the “CLOCK SET” menu.
Note: • To go back, press [s] during steps 2 to 3.
• Clock setting will be lost after a power failure, or
this unit has been unplugged for more than 30
seconds.
OPTIONAL SETTINGS
Note: • If you accidentally select Spanish or French and
AM/PM
--
CLOCK SET
until the main menu appears.
Use
/
Then press
YEAR
----
HOUR MINUTE
-- : --
RECORDING
2
MONTH DAY
10 / --
When “CLOCK SET” menu appears,
go to step 2 in “Clock Setting” on this page.
TROUBLESHOOTING
INFORMATION
EN
EN
E8KKSUD_DVD3315V_EN_v1.indd 13
13
2009/05/27 13:20:10
BASIC OPERATIONS
OPERATIONS
BASIC
BASIC PLAYBACK
For VCR Playback
Before: Turn on the TV.
For Disc Playback
1
(¬page 16 for MP3 playback)
1
Insert a cassette tape so that the unit
will be turned on automatically.
STANDBY-ON
Press
to turn on the unit.
OPEN/CLOSE
.
Then press
Inserte un casete para que la unidad se encienda
automáticamente.
STANDBY-ON
Para encender la unidad, pulse
.
OPEN/CLOSE
Luego pulse
.
TIMER REC
VIDEO
NEXT
IR
TRACKING
• If the protection tab has
removed, playback will
start automatically.
2
Press
VCR
2
to switch to the VCR mode.
Para cambiar al modo de VCR, pulse
VCR
REMEMBER
VCR
• You need to press
first
every time you operate any
of VCR features.
3
Press PLAY
playback.
Insert a disc with its
label side facing up.
.
to start
Inserte un disco con el lado
de la etiqueta hacia arriba.
• Depending on the disc, playback will start automatically
without pressing PLAY .
• In case the DVD is recorded on both sides, make sure the
label of the side you want to playback is facing up.
Pulse PLAY para comenzar la
reproducción.
3
4
DVD
Press
to switch to the
DVD mode.
DVD
Pulse
para cambiar al modo
de DVD.
REMEMBER
4
Press STOP
playback.
to stop the
Pulse STOP para detener la
reproducción.
Press
Pulse
For advanced playback, refer to the following pages.
• Time Search
• Auto Repeat
Note:
¬p.17
¬p.17
• Index Search
¬p.17
• To prevent damage to the cassette tape, still
or slow mode will automatically stop after 5
minutes.
• To return to playback from the picture search,
still or slow mode, press PLAY .
14
E8KKSUD_DVD3315V_EN_v1.indd 14
DVD
• You need to press
first every time
you operate any of DVD features.
PLAY
PLAY
5
to start playback.
para comenzar la reproducción.
Press STOP
playback.
to stop the
Pulse STOP para detener la
reproducción.
For advanced playback, refer to the following pages.
• Disc Menu
¬p.16 • Resume Playback ¬p.16
• Still Mode
¬p.15 • Step-by-step Playback ¬p.15
• MP3 Playback
¬p.16 • Repeat Playback
¬p.17
• Zoom
¬p.16 • Angle
¬p.16
• Search Functions ¬p.16 • Random Playback ¬p.18
• Programmed Playback ¬p.18
EN
2009/05/27 13:20:13
EN
BASIC OPERATIONS
The contents of DVD are generally divided into “titles”.
Titles may be further subdivided into “chapters”.
The audio CD contains “track” and CD-RW/-R with MP3
contains “file”, which may be in a “folder”.
t.
PRECAUTIONS
Note: • For DVD, set “STILL MODE” to “FIELD” in
Hint for Disc Playback
“DISPLAY” menu if pictures in the pause mode
are blurred. (¬ page 23.)
• For VCR, to prevent damage to the cassette
tape, still mode will automatically stop after 5
minutes.
DVD-video
title 2
chapter 2
chapter 1
Slow Forward Playback
chapter 3
DVD-Video Press
track 2
audio CD
track 3
track 4
track 5
first.
Press [PAUSE F] during playback, then press [g]
repeatedly to select the desired forward speed.
Using [NEXT G] on this unit
Pressing and holding [NEXT G] on this unit in the still
mode will also change forward playback speed.
BASIC OPERATIONS
track 1
DVD
PREPARATION
title 1
chapter 1 chapter 2
Return to the normal playback, press [PLAY B].
VHS Press
MP3
folder 1
file 1
file 2
folder 2
file 2
file 1
file 3
DVD-Video Audio CD
MP3
MP3 Press
DVD
VHS Press
VCR
first.
Press [g] or [h] ([F.FWD g] or [REW h] on this
unit) during playback.
Return to the normal playback, press [PLAY B].
reverse speed is different depending on the disc.
Approximate speed is 1(2x), 2(4x), 3(8x), 4(16x)
and 5(32x).
• For VCR, press [g] again so the unit will search
at higher-speed. (in the SLP mode only.)
Still Mode / Step-by-step Playback
MP3
MP3 Press
DVD
first.
Press [PAUSE F] during playback.
DVD-Video only
The picture goes forward by one frame each time you
press [PAUSE F] in the still mode.
Return to the normal playback, press [PLAY B].
first.
Press [PAUSE F] during playback.
The picture goes forward by one frame each time you
press [PAUSE F] in the still mode.
• If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV if equipped.
Return to the normal playback, press [PLAY B].
EN
EN
E8KKSUD_DVD3315V_EN_v1.indd 15
DVD-Video Audio CD
MP3
MP3 Press
DVD
first.
Press [PREV H] or [NEXT G] during playback to skip
titles, chapters, tracks or files to a desired point.
Using [PREV H], [NEXT G] on this unit
Pressing [PREV H] or [NEXT G] on this unit will also
skip titles / chapters / tracks / files to a desired point.
To Reset the Cassette Tape Counter
(Counter Reset)
VHS Press
VCR
first.
Press [DISPLAY] to display the cassette tape counter on
the TV screen. Then, press [CLEAR] to reset the counter
to “0:00:00”.
Note: • This function is not available if the unit begins
the timer recording or one-touch timer recording.
To Rewind the Cassette Tape automatically
(Auto Rewind)
VHS Press
VCR
INFORMATION
VHS Press
VCR
To Skip the Titles, Chapters, Tracks, or Files
TROUBLESHOOTING
DVD-Video Audio CD
depending on the disc.
Approximate speed is 1(1/32x), 2(1/16x), 3(1/8x),
4(1/4x) and 5(1/2x).
• For DVD, set “STILL MODE” to “FIELD” in
“DISPLAY” menu if pictures in the slow forward
are blurred. (¬ page 23.)
• For VCR, to prevent damage to the cassette tape,
slow mode will automatically stop after 5 minutes.
OPTIONAL SETTINGS
Note: • For DVD, audio CD and MP3, fast forward or fast
Note: • For DVD, slow forward speed is different
RECORDING
first.
Press [g] or [h] repeatedly during playback to
select the desired forward or reverse speed.
Using [PREV H], [NEXT G] on this unit
Pressing and holding [PREV H] or [NEXT G] on this
unit will also change forward or reverse playback speed.
Return to the normal playback, press [PLAY B].
first.
Press [PAUSE F] during playback, then press [g].
([ F.FWD g] on this unit.)
• Press [g] or [h] ([ F.FWD g] or [REW h] on
this unit) to change the speed.
• If the distorting picture appears, you can adjust it by
using [TRACKING K/L].
Press [PLAY B] to return to the normal playback.
ADVANCED PLAYBACK
Fast Forward / Fast Reverse Playback
VCR
first.
When a cassette tape ends during playback, fast-forward
or normal recording, the unit will automatically rewind
to the beginning of the cassette tape. After rewinding
finishes, the unit will eject the cassette tape.
15
2009/05/27 13:20:19
ADVANCED PLAYBACK
ADVANCED
PLAYBACK
Disc Menu
DVD-Video Press
Zoom
DVD
DVD-Video Press
first.
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [OK] (or [PLAY B]).
Calling Up a Menu Screen During Playback
DVD-Video Press
DVD
Note: • Menu operations may vary depending on the
disc. Refer to the manual accompanying the disc
for details.
Resume Playback
MP3
MP3 Press
DVD
first.
1) Press [STOP C] during playback. Resume message will
appear on the TV screen.
2) Press [PLAY B], playback will resume from the point
at which playback was stopped.
Note: • To cancel resume, press [STOP C] one more
time in the stop mode.
• For MP3, playback will resume from where you
stopped (if the power has been turned off, the
playback will start from the beginning of the
track).
• The resume playback information stays on even
when the power is turned off, as long as the disc
stays in the unit.
MP3 Playback
Insert a CD-RW/-R with MP3 files, the file list will
automatically appear on the TV screen.
MP3
MP3 Press
DVD
first.
1) Use [K / L] to select a desired folder from the list on
the left side in the file list.
Then, press [PLAY B] or [OK].
2) Use [K / L] to select a desired file from the list on the
right side in the file list.
Then, press [PLAY B] or [OK].
3) Press [STOP C] once to stop MP3 playback
temporarily.
Note: • Depending on some sections, it may take a while
to be recognized.
• Folders and MP3 files are displayed respectively
as and 3 .
• A maximum of 255 folders or 999 files may be
recognized on one disc.
• Up to 8 hierarchies can be recognized in one
folder. Files in the 9th or deeper hierarchies
cannot be played back.
• For MP3 file recorded in VBR (variable bit rate), the
unit may not display the actual elapsed time.
16
E8KKSUD_DVD3315V_EN_v1.indd 16
first.
1) Press [ZOOM] repeatedly to select the desired zoom
factor: 2x, 3x, 4x, 1/2x.
2) Use [K / L / s / B] to slide the zoomed picture across
the TV screen.
3) To exit zoom mode, press [ZOOM] repeatedly.
Note: • Zoom function does not work while the disc
first.
• Press [DISC MENU] to call up the disc menu.
• Press [TITLE] to call up the title menu.
DVD-Video Audio CD
DVD
menu is displayed.
Camera Angles
Some DVD may contain scenes which have been shot
simultaneously from the various angles. You can change
the camera angle if appears on the TV screen.
If the “ANGLE ICON” is set to “OFF” in “OTHERS” menu,
will not appear. (¬ page 23.)
DVD-Video Press
DVD
first.
1) During playback, press [ANGLE].
Each time you press [ANGLE], camera angle changes.
Stereo Sound Mode
This unit allows you to select a sound mode during CD
playback.
Audio CD Press
DVD
first.
1) During playback, press [AUDIO ].
Each time you press [AUDIO ], sound mode changes
as example below.
STEREO (right and left channels are active)
L-ch
(left channel is active)
R-ch
(right channel is active)
Title, Chapter, Track, Folder or File Search
DVD-Video Audio CD
MP3
MP3 Press
DVD
first.
1) Press [SEARCH] for the title, chapter, track, folder or
file search.
For the chapter search, press [B] to highlight .
01/01
002/021
00:03:53
OFF
2) Use [the Number buttons] to enter the desired title,
chapter, track, folder or file number within 5 seconds.
3) Press [OK].
EN
2009/05/27 13:20:22
EN
ADVANCED PLAYBACK
Note:
Repeat Playback
Repeat function is available only during playback.
DVD-Video Audio CD
OFF
DVD-Video
Press [SEARCH] once.
Use [K] or [L] to select a desired index number.
Press [s] to fast rewinding or [B] to fast forwarding.
When the cassette tape has reached an index mark,
playback will start automatically.
MP3
MP3
DVD
first.
1) Press [SEARCH].
2) Press [B] once to highlight when operating audio CD.
Press [B] twice to highlight when operating DVD.
(repeat off)
TRACK
(current track repeat)
ALL
(entire disc repeat)
OFF
(repeat off)
TRACK
(current file repeat)
GROUP
(current folder repeat)
ALL
(entire disc repeat)
Note: • Repeat playback is not available with some discs
or during repeat A-B playback.
Repeat A-B Playback
002/021
--:--:--
Note: • Point B should be in the same title or track as
point A.
• To cancel point A, press [CLEAR] at step 1.
• Repeat A-B playback is not available with some
discs or during repeat playback.
3) Use [the Number buttons] to enter the desired time
within 5 seconds, then press [OK].
Playback will start automatically.
Note: • For DVD, (e.g. to play time 0:15:00) press
EN
E8KKSUD_DVD3315V_EN_v1.indd 17
The unit will automatically rewind the cassette tape when it
has reached the end and will automatically start playback
unless you press [STOP C] or you turn off the unit.
VHS Press
1)
2)
3)
4)
VCR
first.
In stop mode, press [SETUP].
Use [K] or [L] to select “AUTO REPEAT“.
Press [ B] to “AUTO REPEAT” to set “ON” or “OFF”.
Press [SETUP] to exit.
Note: • The auto repeat can also be set to “ON” or “OFF”
by pressing [REPEAT] on the remote control.
• To cancel auto repeat, follow step 1 above.
Then, press [B] so that “OFF” appears beside
“AUTO REPEAT”. Press [SETUP] to exit.
• The auto repeat playback will start
automatically if you select “AUTO REPEAT” to
“ON” in the stop mode.
INFORMATION
[1],[5],[0],[0] of [the Number buttons].
• For DVD and audio CD, press [CLEAR] to erase
the incorrect input at step 3.
• For VCR, press [STOP C] to stop the search.
• For VCR, if a cassette tape ends during a search,
the time search will be canceled and the unit will
rewind to the beginning of the cassette tape.
• The time search is not available for programmed
and random playback of a DVD or an audio CD
or during recording of the VCR.
Auto Repeat Playback
TROUBLESHOOTING
1) Press [SEARCH] twice.
2) Use [K / L] to select a desired time. Then, press [B] to
fast forward, or press [s] to fast rewind. When the
cassette tape is reached to the selected time, playback
will start automatically.
DVD
first.
1) During playback, press [A-B] at your desired starting
point as point A.
2) Press [A-B] at your desired ending point as point B.
3) Press [A-B] to exit the sequence so that “OFF” appears.
OFF
first.
MP3
MP3 Press
OPTIONAL SETTINGS
01/01
EN
OFF
RECORDING
DVD-Video Audio CD Press
VCR
(current title repeat)
DVD-Video Audio CD
Time Search
VHS Press
TITLE
ADVANCED PLAYBACK
Note: • The time gap between index marks must be more
than 1 minute for SP mode, 2 minutes for LP mode
and 3 minutes for SLP mode.
• The index search is not available during
recording.
• Press [STOP C] to stop the search.
• If a cassette tape ends during a search, the index
search will be canceled and the unit will rewind
to the beginning of the cassette tape.
(repeat off)
CHAPTER (current chapter repeat)
Audio CD
first.
first.
BASIC OPERATIONS
1)
2)
3)
4)
VCR
DVD
1) During playback, press [REPEAT].
• Each time you press [REPEAT], repeat function
changes as below.
Index Search
VHS Press
MP3
MP3 Press
PREPARATION
• Depending on the DVD being played back,
this function can also be performed by directly
entering the desired chapter number with
[the Number buttons]. Refer to the manual
accompanying the disc.
• For DVD and audio CD, title, chapter or track
search is not available during programmed or
random playback.
PRECAUTIONS
• To play back a double-digit track, press the track number
directly (e.g. for track 14, press [1], [4] and [OK]).
• To play back a triple-digit track, press the track number
directly for MP3. (e.g. for track 114, press [1], [1], [4] and
[OK]).
17
2009/05/27 13:20:25
ADVANCED PLAYBACK
Note: • Up to 20 chapters, tracks or files can be ordered.
Programmed Playback
You can change the playback order of chapters / tracks / files.
DVD-Video Audio CD
MP3
MP3 Press
DVD
first.
1) During playback, press [MODE] twice when operating
audio CD or MP3.
During playback, press [MODE] three times when
operating DVD.
2) Use [s] or [ B] to select “PROGRAM”. Then press [OK].
For DVD and MP3:
3) Use [K / L / s / B] to select desired title (DVD) or
folder (MP3) input field.
e.g. DVD
DVD-PROGRAM
To tal
0
TITL E
MAX
4
CHA P TE R P L AY A L L CL E A R
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
4) Use [the Number buttons] to enter desired title
(DVD) or folder (MP3) number.
DVD-PROGRAM
To tal
0
TITL E
MAX
CHA P TE R P L AY A L L CL E A R
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
5) Press [OK], then use [the Number buttons] to enter
desired chapter number (DVD) or file number (MP3).
DVD-PROGRAM
03
0
TITL E
MAX
4
--
---
--
---
--
---
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
--
---
6) Repeat steps 3 to 5 to enter another title and chapter
(DVD) or folder and file (MP3) numbers.
7) Use [K/ L/ s / B] to select “PLAY”, then press [OK].
For audio CD:
3) Use [K/ L/ s / B] to select desired track input field.
4) Use [the Number buttons] to enter desired track
number.
CD-PROGRAM
0
No.
MAX
TRACK
14
P L AY A L L CL E A R
01
--
06
--
11
--
16
--
02
--
07
--
12
--
17
--
03
--
08
--
13
--
18
--
04
--
09
--
14
--
19
--
05
--
10
--
15
--
20
--
5) Repeat steps 3 to 4 to enter another track number.
CD-PROGRAM
To tal
6)
0
No.
MAX
TRACK
14
P L AY A L L CL E A R
01
05
06
--
11
--
16
--
02
--
07
--
12
--
17
--
03
--
08
--
13
--
18
--
04
--
09
--
14
--
19
--
05
--
10
--
15
--
20
--
Use [K/ L/ s / B] to select “PLAY”, then press [OK].
18
E8KKSUD_DVD3315V_EN_v1.indd 18
This function shuffles the playing order of chapters/tracks/
files instead of playback in sequence.
DVD-Video Audio CD
MP3
MP3 Press
DVD
first.
1) During playback, press [MODE] twice when operating
audio CD or MP3.
During playback, press [MODE] three times when
operating DVD.
2) Use [s] or [ B] to select “RANDOM”. Then press [OK].
CHA P TE R P L AY A L L CL E A R
011
To tal
Random Playback
4
03
To tal
• To erase all the programs at once, select “ALL
CLEAR’’ and press [OK] or press [CLEAR] in
program input.
• The number of the title or chapter you enter
using [the Number buttons] cannot exceed
the maximum number of the chapters,tracks or
files on the disc.
• During the program playback, press [STOP C]
once to set the resume point, and then press
[PLAY B] to resume the program playback
from the beginning of the track where the
[STOP C] was pressed.
• During the program playback, press [STOP C]
twice to cancel the program playback. Your
programs are still stored until either the disc is
removed or power is turned off.
• Some DVD will not allow you to set
programmed playback.
• During programmed playback, “ TITLE” repeat
(DVD), and “ GROUP” repeat (MP3) are not
available.
Note: • During random playback, you cannot go back
to the previous track. Pressing [NEXT G]
allows you to search chapters, tracks or files
randomly.
• During DVD random playback, you can play
back chapters in the current title randomly.
• Some DVD will not allow you to set random
playback.
Settings
Black Level Setting
Adjust the black level to make the dark areas of the picture
brighter.
DVD-Video Press
DVD
first.
1) During playback, press [MODE] once.
2) Use [s] or [ B] to adjust the black level.
ON: makes the dark areas brighter.
OFF: shows the original picture as recorded.
3) Press [RETURN ] to exit.
Virtual Surround
You can enjoy stereophonic virtual surround on your 2
channel stereo system.
DVD-Video Audio CD
MP3
MP3 Press
DVD
first.
1) During playback DVD, press [MODE] twice.
During playback audio CD or MP3, press [MODE] once.
EN
2009/05/27 13:20:28
EN
ADVANCED PLAYBACK
On-Screen Display
You can refer to the various information on the screen
when you press [DISPLAY].
Press
DVD
first.
DVD-Video
1st
if the sound mode is set to something other than
“STEREO”. Refer to “Stereo Sound Mode”.
• When you connect the unit to a Dolby Digital
decoder with DIGITAL AUDIO OUT JACK, please
select “PCM” in “AUDIO” menu (Refer to p.12 for
details).
current repeat setting
2nd
ADVANCED PLAYBACK
current play mode setting
elapsed time of the
current title
Normal display (display off)
Audio CD
TR(track):
current track number / total tracks
01/26
1st
00:00:11
OFF
current repeat setting
RECORDING
(French subtitles)
NORMAL
DISPLAY
1) During playback, press [SUBTITLE].
Each time you press [SUBTITLE] during playback, the
subtitle language changes as example below.
FRE
00:00:20 - 00:01:09
3rd
To Change the Subtitle Language
(English subtitles)
elapsed time of the
current chapter
DISPLAY
03/24
ENG
NORMAL
TT(title):
current title number / total titles
remaining time of the
current title
first.
(no subtitles)
BASIC OPERATIONS
001/002 00:00:19 - 00:01:11
This unit allows you to select a subtitle (if available) or an
audio language (if multiple languages are available for
audio language) during DVD playback.
OFF
C(chapter):
current chapter number /
total chapters
DISPLAY
CH(chapter):
current chapter number / total chapters
remaining time
of the current chapter
Subtitle Language and Audio Language
DVD
T(title):
current title number / total titles
elapsed time of the
current title
03/24
001/002
00:00:40
OFF
PREPARATION
Note: • For audio CD, virtual surround will not be effective
DVD-Video Press
PRECAUTIONS
2) Use [s / B] to select the desired sound mode.
3D:
sound mode suitable for setting
stereophonic audio
JAZZ:
sound mode suitable for jazz music
ROCK:
sound mode suitable for rock music
POP:
sound mode suitable for pop music
CLASSIC: sound mode suitable for classic music
OFF:
no effects (original sound)
3) Press [RETURN] to exit.
elapsed time of the
current track
DISPLAY
...
2) To cancel the subtitle, use [B] or [s] to set subtitle to
“OFF“.
remaining time
of the current track
01/26
To Change the Audio Language
2nd
ENG
(English audio)
SPA
(Spanish audio)
FRE
(French audio)
NORMAL
current play mode setting
elapsed time of the
current track
DISPLAY
OPTIONAL SETTINGS
1) During playback, press [AUDIO ].
Each time you press [AUDIO ] during playback, the
audio language changes as example below.
00:00:12 - 00:03:20
ALL:
current track number / total tracks
remaining time of the
entire disc
01/26
3rd
00:00:14 - 01:11:28
NORMAL
elapsed time of the entire disc
DISPLAY
...
Normal display (display off)
MP3
MP3
current folder number / total folders
current file number / total files
in the current folder
elapsed time of the current file
004/027
001/013
00:00:36
file name1
1st
1. folder1
2. folder2
3
3
1. file name1
2. file name2
file name1
EN
E8KKSUD_DVD3315V_EN_v1.indd 19
current repeat setting
DISPLAY
TR(track): current file number / total files in the current folder
elapsed time of the current file
remaining time of the current
file
001/013 00:00:43 - 00:03:36
NORMAL
2nd
EN
OFF
INFORMATION
[SUBTITLE] or [AUDIO ] several times, the
disc may not have that language. However,
some discs allow subtitle/audio language
setting on the disc menu.
• When “ ” appears on the TV screen, it means
no subtitle/audio are recorded on the scene.
• Some discs will only allow you to change the
subtitle/audio language setting from the disc
menu.
• Operation varies depending on the disc, so refer
to the manual along with the disc for details.
TROUBLESHOOTING
Note: • If your language is not shown after pressing
1. folder1
2. folder2
3
3
1. file name1
2. file name2
current play mode setting
DISPLAY
Normal display (display off)
19
2009/05/27 13:20:31
RECORDING
RECORDING
ASIC
C RECORDING
Before: Turn on the TV.
This unit has no tuner system so it cannot receive TV broadcasts without external tuner or such devices.
Note: • You can also set the external tuner for timer recording. Refer to
“Satellite Link” on page 22.
• You CANNOT dub a DVD to a video cassette tape.
• Do not change the external tuner’s channel while you are recording.
You CANNOT watch one channel and record another at the same time.
TV
this unit
external tuner
Recording & OTR (One-touch Timer Recording)
1
STANDBY-ON
OPEN/
CLOSE
Press
to turn on the unit.
Then insert a recordable tape.
DVD
TIMER REC
VIDEO
TRACKING
STANDBY-ON
Para encender la unidad, pulse
Luego inserte una cinta grabable.
.
• If the erase-protection tab has been
removed, cover the hole with clear tape.
2
VCR
Press
to switch to the VCR mode.
Para cambiar al modo de VCR, pulse
REMEMBER
VCR
• You need to press
first
every time you operate any
of VCR features.
4
Press
SPEED
SPEED
Pulse
para seleccionar la velocidad deseada
de la cinta.
1hour
SLP mode
3hours 6hours
RECORD
RECORD
REC
Pulse
hasta que se seleccione
el tiempo de duración de grabación
deseado.
REC
OTR (0:30)
OTR (8:00)
6
T120
SP mode
Press
until desired
duration recording
time is selected.
(normal recording)
T60
.
Press
INPUT
INPUT
Pulse
hasta que se visualice “L1” o “L2” en la
pantalla de la TV. Seleccione “L1” para activar los
conectores posteriores de entrada. Seleccione “L2”
para activar los conectores frontales de entrada.
T160
• Connect your external tuner to the L1 (rear panel) jacks
of the unit. Connect camcorders and other such devices
to the L2 (front panel) jacks. Refer to pages 8, 9.
2hours 2-2/3hours
8hours
7
8
5
Press
Pulse
OTR (1:00).....
OTR (7:30)
To stop recording temporarily,
press
PAUSE
until “L1” or “L2” is displayed on
the TV screen. Select “L1” to activate rear
input jacks. Select “L2” to activate front
input jacks.
SP
Recording / playback time
Type of tape
VCR
3
to select the desired tape speed.
Tape speed
PREV
IR
.
Para detener la grabación temporalmente, pulse
PAUSE
.
• During the recording in the pause mode, 5 C marks appear on the
TV screen. Each C mark represents 1 minute.
again to resume recording.
• Press
• Pause mode will be automatically canceled after 5 minutes to
prevent damage to the cassette tape and the video head.
to stop recording.
STOP
STOP
para detener la grabación.
OPEN/CLOSE
Press
to eject the recorded
cassette tape.
OPEN/CLOSE
Pulse
para expulsar el casete grabado.
Accidental Erasure Prevention
To prevent accidental
recording, remove eraseprotection tab of the cassette
erase-protection tab
tape. To record again, cover
the hole with adhesive tape.
PAUSE
20
E8KKSUD_DVD3315V_EN_v1.indd 20
How to set the timer recording or satellite link,
refer to pages 21-22.
EN
2009/05/27 13:20:32
EN
RECORDING
VHS Press
1
VCR
first.
SETUP
-MENU-
TIMER PROGRAMMING
B TIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT [OFF]
CLOCK SET
LANGUAGE SELECT
PROG
12345678
DATE
START TIME
END
TIME
L1/L2
REC SPEED
To Cancel a Timer Recording in Progress
––
––
Note for Timer Recording & OTR
Use
/
to select
“ONCE“, “DAILY“ (Mon-Fri), or
“WEEKLY“. Then, press
to go to next step.
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
Use
/
to select the
desired month. Then, press
to go to the next step.
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE
1 0 / 2 1 TUE
START TIME – – : – – – –
END
TIME – – : – – – –
L1/L2
––
REC
SPEED – –
Then, repeat procedures above to select the day, start
time, end time, and “L1” or “L2” as well.
Use
/
CLEAR
.
PROGRAM NUMBER 1
DATE
1 0 / 2 1 TUE
START TIME 0 7 : 3 0 PM
END
TIME 0 8 : 3 0 PM
L1/L2
L1
REC
SPEED SP
B SP
SLP
6
Press
to set the timer standby mode.
The [TIMER REC] indicator on this unit lights up and
the unit goes to the DVD mode.
Note: • To go back one step, press [s] during steps 3 to
• To cancel the timer standby mode, press [TIMER SET] on
the remote control or [STOP/EJECT C A] on the unit,
then press [VCR ] to activate the VCR function again.
When an OTR or a Timer Recording is Completed.
• If “AUTO POWER OFF” function for DVD has been
activated and some timer programming are left, the
[TIMER REC] indicator lights up and the unit goes to the
timer standby mode.
• The [TIMER REC] indicator blinks if there are no more
timer programming.
TROUBLESHOOTING
5.
• Select “L1” or “L2” to activate rear input jacks or
front input jacks accordingly.
• Press [TIMER SET] on the remote control or [STOP/
EJECT C A] on the unit, then press [VCR ] to activate
the VCR function again.
OPTIONAL SETTINGS
To set another program after step 5, press
.
Then, repeat procedures from steps 2 through 5.
You can program the unit to record up to 8 programs,
and up to 1 year in advance.
TIMER SET
After an OTR or a Timer Recording Has
Been Set, This Unit Operates as Follows:
ONE TIME PROGRAM
to select
recording speed. Then, press
• If there is no cassette tape in the unit or the cassette
tape does not have the erase-protection tab,
the [TIMER REC] indicator blinks and timer recording
cannot be performed.
• If there is a power failure occurred or the unit is
unplugged for more than 30 seconds, clock setting and
all programmed timer recordings will be lost.
• If a cassette tape runs out before an OTR or a timer
recording is finished, the unit ejects the cassette tape.
RECORDING
5
Press [STOP/EJECT C A] on the unit.
ADVANCED PLAYBACK
4
PROGRAM NUMBER 1
DATE
––/––
START TIME – – : – –
END
TIME – – : – –
L1/L2
––
REC
SPEED – –
BASIC OPERATIONS
3
Use
/
to select an
empty program number. Then,
press
to go to next step.
1) Press [TIMER SET], and then press [VCR ] on the
remote control.
2) Repeat procedures in step 1 above.
3) Use [K / L] to select the program number you want
to check. The details of the program you select will
appear on the TV screen.
Use [s / B] to go to the digit you want to change.
Then, use [K / L] to enter the correct numbers.
You can cancel the entire program by pressing [s]
while the program number blinks.
4) Press [CLEAR] to exit.
5) Press [TIMER SET] to return to the timer standby
mode.
PREPARATION
Press
, use
/
to select
“TIMER PROGRAMMING”.
to go to next step.
Then, press
Available program
number blinks.
2
PRECAUTIONS
To Check, Correct or Cancel a Timer Program
Timer Recording
• If auto power off for DVD has NOT been activated, the
unit goes to the DVD mode and all the VCR functions
will be unavailable. All the DVD functions are available
during OTR, timer standby mode and timer recording.
• Press [STOP/EJECT C A] on this unit or [TIMER SET]
on the remote control to use the VCR when the unit is
turned off.
• Press [STANDBY-ON] to turn on the unit. Press [DVD
on the remote control to choose DVD mode. Then
continue with the other DVD features as described in
this manual.
EN
EN
E8KKSUD_DVD3315V_EN_v1.indd 21
INFORMATION
To Use the DVD Player During Timer
Recording or While the [TIMER REC]
Indicator is On or Blinking.
]
21
2009/05/27 13:20:43
RECORDING
Note: • Recording picture will be distorted if the copy
Satellite Link
protection signal is being detected during
satellite link.
• When the timer recording and the satellite link
are overlapped, those recordings are recorded as
illustrated below.
You can set the unit to start recording whenever it detects
a video signal from the external tuner.
Preparing for the Satellite Link:
• Only L1 (rear) is available for satellite link and be sure
that this L1 needs to be connected by the external tuner.
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set it
to the output audio/video signals when it comes to the
time you want to start recording, and stop those signals
when it comes to the time you want to finish recording.
Refer to the tuner’s manual on how to set the timer.
e.g.) In case of the satellite link is overlapped on the existing timer recording.
timer recording
satellite link
recording result
e.g.) In case of the timer recording is programmed in the
middle of the satellite link.
timer recording
L1
VCR
DIGITAL
AUDIO OUT
DVD
AUDIO
OUT
DVD/VCR
S-VIDEO
OUT
COMPONENT
VIDEO OUT
AUDIO OUT
Y
L
satellite link
external tuner
To video out jack
AUDIO IN
recording result
AUDIO IN
L
CB
COAXIAL
VCR
R
VIDEO OUT
R
VIDEO IN
VIDEO IN
CR
e.g.) In case of the timer recording is overlapped on the
existing satellite link.
timer recording
To audio(L)out jack
RCA audio/video cables
VHS Press
1
Press
VCR
SPEED
satellite link
first.
recording result
to select the desired tape speed.
Dubbing a Cassette Tape
SP
2
3
4
SETUP
In the stop mode, press
.
Use
/
to select
“SATELLITE LINK”. Then, press
to go to the next step.
-MENU-
Warning: Unauthorized recordings of copyrighted
cassette tapes may be an infringement of
copyright laws.
TIMER PROGRAMMING
B SATELLITE LINK
AUTO REPEAT
[OFF]
CLOCK SET
LANGUAGE SELECT
front of the unit
output jacks of
external device
Use
/
to select the
desired hour. Then, press
go to the next step.
VIDEO OUT
VIDEO
STANDBY-ON R
RCA video cable
AUDIO
SATELLITE LINK
AUDIO OUT
to
0 1 : 0 0 PM
or
L
RCA audio cable
L2
R
Then, repeat procedures above to select the minute
as well.
The hour can be selected from 1-12 with AM or PM.
When the external tuner signal is stopped, recording
will be stopped.
5
Press
to set satellite
link standby mode.
SATELLITE LINK
0 1 : 3 0 PM
[ON]
[TIMER REC] indicator: lights up and the unit goes to
the DVD mode. If you do not use DVD function, turn
OFF the unit.
An external tuner must be turned ON for satellite link
to start. If external tuner is not set to output signals,
satellite link will remain in standby mode.
You can use a video disc player, cable/satellite box or
other devices with the audio/video output jacks.
VHS Press
VCR
first.
1) Press [SPEED] on the remote control to select recording
speed (SP or SLP).
2) Press [INPUT] on the remote control to select L1 or L2
whichever the jack the external device is connected to.
3) Press [RECORD] on the unit, and then start playback of
the external device.
4) To stop recording, press [STOP/EJECT C A] on this
unit.
5) Stop playback of the external device.
Note: • For best results during dubbing, use buttons on
this unit whenever possible. The remote control
might affect another device’s operation.
To Cancel the Satellite Link on Standby:
Press [TIMER SET] on the remote control or
[STOP/EJECT C A] on this unit.
To Cancel the Satellite Link in Progress:
Press [STOP/EJECT C A] on this unit.
22
E8KKSUD_DVD3315V_EN_v1.indd 22
EN
2009/05/27 13:20:45
EN
OPTIONAL SETTINGS
OPTIONAL
SETTINGS
PRECAUTIONS
Changing the DVD Settings (in the setup menu)
Setup menu (highlight is the default)
AUDIO
Contents
Notes
Set the language for
audio.
• Language options are not available with some discs.
• Only the languages supported by the disc can be selected.
• “LANGUAGE” setting for “AUDIO” and “SUBTITLE” are not
available with some discs. Then use [AUDIO ] and [SUBTITLE].
Refer to page 19.
••
•
BASIC OPERATIONS
ORIGINAL
ENGLISH
FRENCH
SPANISH
PREPARATION
In the setup menu, you can customize the various kinds of settings as you prefer.
Refer to the following instructions to navigate through the setup menus.
1) Press [SETUP].
2) Use [s / B] to select a setup item.
3) Use [K/ L] to go up or down in the menu list.
4) Press [OK] to access the sub contents of the highlighted item.
5) Use [K/ L] to select a setting.
6) Press [SETUP] to exit.
• The following table is the contents which you can set and the default settings. Refer to the table for useful operation.
• Your change to each setting stays on even when the unit is turned off.
OTHER
OFF
ENGLISH
FRENCH
SPANISH
Set the language for
subtitles.
••
•
ADVANCED PLAYBACK
LANGUAGE
SUBTITLE
OTHER
DISC MENU
ENGLISH
FRENCH
SPANISH
Set the language for
disc menu language.
••
•
AUDIO
PARENTAL
4:3 LETTER BOX Set the picture size
4:3 PAN & SCAN according to aspect
ratio of your TV.
16:9 WIDE
STILL MODE
AUTO
FIELD
FRAME
Set the type of still
image in pausing
playback.
Select “AUTO”
usually.
DRC
(Dynamic Range Control)
ON
OFF
DOWN SAMPLING
ON
OFF
DOLBY DIGITAL
BITSTREAM
PCM
PASSWORD
NO
YES
Set to “ON” to
compress the range
between soft and
loud sounds.
Set to “ON” when
outputting in 48kHz.
Set to “OFF” when
outputting the
original sound.
Set the type of sound
signal which outputs
from the digital
audio output jack.
Enter the password.
LEVEL
LEVEL8 [ADULT] Set the parental level for DVD playback. (Refer to page 24.)
LEVEL7 [NC-17] to
LEVEL1 [KID SAFE]
Set and change the password. (Refer to page 24.)
Set whether to display the angle icon or not.
ON
OFF
Set to “ON” to turn off this unit automatically after 30 minutes of no use.
ON
OFF
AUTO POWER OFF
E8KKSUD_DVD3315V_EN_v1.indd 23
• Select “4:3 LETTER BOX” so that black bars may appear on the
top and bottom of the TV screen.
• Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.
• Select “16:9 WIDE” if a wide-screen TV is connected to this unit.
• “AUTO” automatically selects the best resolution setting
(“FRAME” or “FIELD”) based on the data characteristics of the
pictures. Some pictures may be blurred when you select “AUTO”
in the still mode due to their data characteristics.
• An individual picture on the TV screen is called a “frame”, which
consists of two separate images called as “field”.
• If you select “FIELD”, the picture in the still mode will be
stabilized. If you select “FRAME”, the picture in the still mode will
be highly defined.
• This function is available only on the discs which are recorded in
the Dolby Digital format.
• When playing back a 96kHz disc with the copyright protection, or
when virtual surround is set to “1” or “2”, the sound will be down
sampled at 48kHz even if the “DOWN SAMPLING” is set to “OFF”.
• This function is available only on digital outputting of a disc
recorded in 96kHz.
• Select “PCM” when the unit is connected to a 2ch digital audio
device.
• Select “BITSTREAM” when the unit is connected to a Dolby
Digital decoder.
INFORMATION
OTHERS
TV ASPECT
CHANGE
ANGLE ICON
Set the language for
OSD (on-screen
display).
TROUBLESHOOTING
EN
ENGLISH
FRANÇAIS
ESPAÑOL
OPTIONAL SETTINGS
EN
PLAYER MENU
RECORDING
DISPLAY
OTHER
23
2009/05/27 13:20:47
OPTIONAL SETTINGS
Press
DVD
first.
Press [STOP C] if you are playing back a disc.
PARENTAL Setting
Parental setting will prevent your children from viewing
inappropriate materials (password protected). Playback
will stop if the ratings exceed the levels you set.
To Set the Parental Level
1
2
3
SETUP
Press
to call up the setup menu.
Use
/
to select
.
OK
Press
, and then use
/
to select “YES”.
When you use the unit for the first time, use
[the Number buttons] to enter the 4-digit number
for your password (except for 4737). Then, re-enter
the new password.
PASSWORD
Enter password
CONTROL LEVELS
• Level 8:
DVD software of any grades (adult/
general/children) can be played back.
only DVD software intended for general
• Levels 7 to 2:
use and for children.
• Level 1:
only DVD software intended for
children, with those intended for adult
and general use prohibited.
TIPS FOR LEVELS
• 8 [ADULT]:
DVD software of any grades (adult/
general/children) can be played back.
• 7 [NC-17]:
no one under 17 admitted
• 6 [R]:
restricted; under 17 requires
accompanying parent or adult
guardian
• 5 [PGR]:
parental guidance recommended
• 4 [PG13]:
unsuitable for children under 13
• 3 [PG]:
parental guidance suggested
• 2 [G]:
general audience
• 1 [KID SAFE]:
suitable for children
Note: • Record the password in case you forget it.
NO
YES
• Some DVD-video may not respond to
“PARENTAL“ setting. Make sure this function
works with your DVD-video.
• The resume information will be cleared if you
change the parental level when the resume
information is on.
----
• If you have set password already, use
[the Number buttons] to enter the current 4-digit
password.
To Change the Password
1
2
PARENTAL_CHANGE
PASSWORD
LEVEL
CHANGE
----
Enter password
4
Use
/
to select “LEVEL“, then press
OK
Follow the step 1 to 3 in “To Set the Parental Level” on
the left.
Use
/
.
Use
OK
/
to select the desired level, then press
3
.
Use [the Number buttons] to enter the new 4-digit
password (expect for 4737). Then, re-enter the new
password.
PASSWORD
LEVEL
CHANGE
8 [ADULT]
SETUP
Press
to exit.
.
PASSWORD
LEVEL
CHANGE
PASSWORD
LEVEL
CHANGE
6
OK
PARENTAL_CHANGE
PASSWORD
LEVEL
CHANGE
5
to select “CHANGE, then press
Enter new password
4
----
SETUP
Press
to exit.
Note: • If you forget the password, press [4], [7], [3], [7],
then enter your new password.
Password will be cleared and parental levels will
be set to “LEVEL 8 [ADULT]”.
24
E8KKSUD_DVD3315V_EN_v1.indd 24
EN
2009/05/27 13:20:48
EN
OPTIONAL SETTINGS
PRECAUTIONS
INITIALIZE
Reset the settings to factory default.
SETUP
Press
to call up the setup menu.
OK
Use
/
to select
, then press
.
PREPARATION
1
2
3
OK
Press
to select “YES”, then press
.
INITIALIZE_INITIALIZE
INITIALIZE
BASIC OPERATIONS
4
YES
Press 1 , 2 or 3 to select the desired language.
SELECT MENU LANGUAGE
ENGLISH
FRANÇAIS
ESPAÑOL
ADVANCED PLAYBACK
1
2
3
The next time you operate, the player menu language
will be the one you have selected.
RECORDING
OPTIONAL SETTINGS
TROUBLESHOOTING
INFORMATION
EN
EN
E8KKSUD_DVD3315V_EN_v1.indd 25
25
2009/05/27 13:20:50
TROUBLESHOOTING
TROUBLESHOOTING
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this manual. Refer to the following:
Symptom
DVD • VCR
No power.
This unit does not respond to the
remote control.
Poor picture or noise.
•
•
•
•
•
•
Remedy
Make sure the power plug is connected to an AC outlet.
Make sure the power is turned on.
Check if the power plug is connected to an AC outlet.
You have to be within 23 feet (7m) of this unit.
Check if a cassette tape or disc is in this unit.
Interference signal may be received. Change the position and direction of the unit.
VCR
Cannot record a TV program.
• This unit does not have a tuner to receive TV broadcasting.
• You must connect this unit to TV with audio/video output jacks or an external tuner to
record TV programs. Refer to “Recording & OTR (One -touch Timer Recording)” on page 20
and “Satellite Link” on page 22.
Timer recording is impossible.
• Make sure the timer program is set correctly.
• Make sure [TIMER REC] indicator on this unit lights up. If not, press [TIMER SET].
• Make sure the VCR clock is set correctly.
Cannot go into record mode.
• Make sure the cassette tape has a record tab. If needed, cover the hole with adhesive tape.
• Activate this unit in VCR mode. Press [VCR ] on the remote control so that the [VCR]
indicator will illuminate.
Playback picture is partially noisy.
• Adjust tracking control for a better picture by pressing [TRACKING K / L].
Cannot view a picture but the audio • Head cleaning may be necessary. Refer to “Auto Head Cleaning” (page 27).
is OK.
No or poor, playback picture.
• Fine tune your TV.
• Connect the video cable firmly.
Video or color fades in and out when • You cannot copy a copyrighted cassette tape.
making a copy of a cassette tape.
Cannot remove the cassette tape.
• Check if this unit is in the VCR mode. If not, press [VCR ] on the remote control to switch
the mode.
DVD
No picture.
• Connect the video cable firmly.
• Insert a correct video disc that can be played back on this unit.
• Press [DVD ] on the remote control. Check if the [DVD] indicator will illuminate. Then try
other DVD features.
Disc cannot be played back.
• Insert the disc.
• Clean the disc.
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on
its surface.
No sound.
• Connect the audio cables firmly.
• Turn on the power of the audio component.
• Correct the audio output settings.
• Correct the input settings on the audio component.
No DTS audio is output.
• This unit does not support DTS audio.
Distorted picture.
• Connect this unit directly to the TV.
• There are some cases where pictures may be slightly distorted, and those are not a sign of a
malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
Audio or subtitle language does not • The selected language is not available for audio or subtitles on the DVD.
match the setting.
The camera angle cannot be
• The DVD does not always contain sequences recorded from different camera angles.
changed.
Audio or subtitle language
• The DVD does not always contain audio source or subtitles in the selected language.
cannot be changed.
“ ” appears on the TV screen,
• The operation is prohibited by this unit or the disc.
prohibiting an operation.
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual
for details on correct operations.
• Playback from a desired track and random playback are not available during programmed playback.
• Some functions are prohibited on some discs.
26
E8KKSUD_DVD3315V_EN_v1.indd 26
EN
2009/05/27 13:20:51
EN
INFORMATION
INFORMATION
PRECAUTIONS
Maintenance
• Please refer to relevant topics on the “Troubleshooting
Guide” on page 26 before returning the product.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call
our toll free customer support line found on the back of
this manual to locate an authorized service center.
• Automatically cleans video heads as you insert or
remove a cassette tape, so you can see a clear picture.
• If the playback picture is blurred or interrupted while
the TV broadcast is showing clear, the dirt may have
accumulated on the video heads, or the usage of rental
or worn cassette tapes can cause this problem. If a
streaky or snowy picture appears during playback, the
video heads in your unit may need to be cleaned.
1. Please visit your local audio/video store and purchase
a good quality VHS video head cleaner.
2. If a Video head cleaner does not solve the problem,
please call our toll free customer support line found on
the back of this manual to locate an authorized service
center.
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol,
spirits, ammonia or abrasive.
Cleaning Discs
Cleaning the Disc Lens
• If this unit continues to perform improperly even after
you have referred to the relevant sections and to the
“Troubleshooting Guide” in this manual, the laser optical
pickup unit may be dirty. Consult your dealer or an
authorized service center for inspection and cleaning of
the laser optical pickup unit.
Disc Handling
the video head cleaner before use.
• Clean video heads only when problems occur.
IR Signal Check
• If the remote control does not work properly, you can
test if the remote control is sending out the infrared
signal with AM radio or a digital camera (including builtin camera of cellular phone). It will help to define the
cause of malfunction.
• With an AM radio:
Tune an AM radio to a station with no
broadcasting. Press a button on remote
control toward the radio. Sound will
be fluttering when you press any key
and the radio receives the signal. This
means the remote control is working.
• With a digital camera
(including built-in
camera of cellular phone):
Direct a digital camera to remote control,
press and hold a button on remote control.
If infrared light appears through digital
camera, the remote control is working.
RECORDING
• When you handle a disc, hold it by its edge and try not
to touch the surface of the disc.
• Always store the disc in its protective case when not in
use.
• Do not glue paper or put stickers onto the disc. This may
damage the disc, and the unit may not read it correctly.
Note: • Remember to read the instructions along with
ADVANCED PLAYBACK
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not wipe
in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
BASIC OPERATIONS
Auto Head Cleaning
PREPARATION
Servicing
OPTIONAL SETTINGS
Specifications
Disc media size:
Terminals:
Component video output:
EN
RCA jack x 3
Y:
1Vp-p (75Ω)
Pb: 700mVp-p (75Ω)
Pr: 700mVp-p (75Ω)
S-video output:
Mini DIN 4-pin jack x 1
Y:
1Vp-p (75Ω)
C:
286mVp-p (75Ω)
Video output:
RCA jack x 1 1Vp-p (75Ω)
Coaxial digital audio output RCA jack x1 500mVp-p (75Ω)
Audio output:
RCA jack x 4 2V rms
Video input:
RCA jack x 2 1Vp-p (75Ω)
Audio input:
RCA jack x 2 2V rms
E8KKSUD_DVD3315V_EN_v1.indd 27
Recommended circumstances of recording MP3 files:
Sampling frequency:
44.1kHz or 48kHz
Constant bit rate:
32kbps ~ 320kbps
Digital encoded infrared light system
Remote control:
Operating temperature: 41°F (5°C) to 104°F (40°C)
Power requirements:
120V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption (maximum):
21W
(standby: 3.8W)
Dimensions:
W: 17 3/16” (435mm)
H: 3 3/4” (94mm)
D: 9 3/16” (233mm)
Weight:
Approx. 5.8lbs (2.6kg)
INFORMATION
EN
NTSC color
Rotary four-head
1/2 inch (12.65mm)
SP: 1-5/16 inch/sec. (33.40mm/sec)
LP: 16.67mm/sec.
SLP: 7/16 inch/sec. (11.12mm/sec.)
5 inches (12 cm) / 3 inches (8 cm)
TROUBLESHOOTING
Output signal format:
Video heads:
Tape width:
Tape speeds:
• Designs and specifications are subject to change without notice.
• If there is a discrepancy between languages, the default language will
be English.
27
2009/05/27 13:20:51
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or
workmanship as follows:
DURATION:
PARTS:
LABOR:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year
from the date of original retail purchase. Certain parts are excluded from this warranty.
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the
date of original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR
OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO
OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized service center. This limited warranty does not
apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during
normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs,
alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse,
abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use
such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or
other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL),
ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL,
INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING
THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO
PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE
CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY
FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN
SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its
original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE
CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers
without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,
please contact us at:
FUNAI SERVICE CORPORATION
Customer Service
Tel: 1-800-317-6062
http://philcousa.com/
2200 Spiegel Drive, Groveport, OH 43125
Printed in China
E8KKSUD_DVD3315V_EN_v1.indd 28
E8KKSUD
1VMN27753 ★★★★★
2009/05/27 13:20:52
Download PDF

advertising