FUNAI MSD1005 DVD Player User Manual

E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 1
Owner’s Manual
Please read before using this unit.
DVD/CD Player
MSD1005
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Supplied Accessory
Owner's Manual
Before Using Your Unit
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Important Safeguards . . . . . . . . . . . . . . . . . .
Installation Location . . . . . . . . . . . . . . . . . . . . .
Avoid the Hazards of Electrical Shock and Fire
Moisture Condensation Warning . . . . . . . . . . .
About Copyright. . . . . . . . . . . . . . . . . . . . . . . .
Notice for Progressive Scan Outputs . . . . . . . .
Symbols Used in This Manual . . . . . . . . . . . . .
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . .
■ About the Discs . . . . . . . . . . . . . . . . . . . . . . .
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . .
Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . .
1) Connect the AUDIO/VIDEO output jacks of this unit to the
AUDIO/VIDEO input jacks of your RF Modulator by audio and
video cables.
2) The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then connect the RF cable to your RF Modulator (usually marked “ANT
IN”.)
3) Connect your RF modulator to your TV by another RF cable.
4) Set your RF modulator’s channel 3/4 switch to either 3 or 4,
whichever the TV channel is least used in your area. If your RF
modulator has a Modulator/Antenna switch, set it according to
your RF modulator’s manual.
5) Turn on your TV and choose the same channel as you set the
RF modulator’s channel 3/4 switch to.
For more details, follow the instructions supplied with the RF
Modulator.
HDMI OUT
DIGITAL OUT
(PCM/BITSTREAM)
2CH AUDIO
OUT
L
COMPONENT
VIDEO OUT
Y
CR/PR
■
■
■
■
■
■
S-VIDEO
OUT
(Back of T
Stereo Audio/Video RF Modulator
(commercially available)
TO TV
VIDEO
AUDIO
R
L
R
VIDEO
OUT
■
CB/PB
1
Audio/Video
Cables
(Supplied)
2
Antenna in jack
3
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
...2
...3
...4
...4
...4
...4
...4
...4
...4
...5
...5
...5
Functions
OPTICAL COAXIAL
CHANNEL
3
4
.
.
.
.
.
.
.
.
.
.
.
.
■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connection to a TV with an HDMI Compatible Port . . . . 7
Connection to an Audio System . . . . . . . . . . . . . . . . . . . 8
Rear Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
HDMI Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
■ About the Remote Control . . . . . . . . . . . . . . . . . . . . 10
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Installing the Batteries for the Remote Control . . . . . . . 10
(Back of DVD player)
Antenna
AC 120V ANT IN
.
.
.
.
.
.
.
.
.
.
.
.
Setup
If your TV has AUDIO/VIDEO input jacks, see the section
“Connections” on page 6. If not, it is still possible to connect this
unit to your TV by using a STEREO AUDIO/VIDEO RF Modulator
(commercially available.) In this case, follow the instructions below.
Cable
Signal
Precautions
■
RF Cable (Not supplied)
Hint
• The quality of picture may become poor if the unit is connected
to an RF Modulator.
Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . .
MP3/WMA Playback . . . . . . . . . . . . . . . . . . .
On-Screen Display. . . . . . . . . . . . . . . . . . . .
Search Function . . . . . . . . . . . . . . . . . . . . .
Track Search . . . . . . . . . . . . . . . . . . . . . . . . .
Title / Chapter Search . . . . . . . . . . . . . . . . . .
Time Search . . . . . . . . . . . . . . . . . . . . . . . . .
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . .
Repeat / Random / Programmed Playback .
Repeat Playback . . . . . . . . . . . . . . . . . . . . . .
Repeat A-B Playback. . . . . . . . . . . . . . . . . . .
Random Playback . . . . . . . . . . . . . . . . . . . . .
Programmed Playback. . . . . . . . . . . . . . . . . .
Special Settings. . . . . . . . . . . . . . . . . . . . . .
Subtitle Language . . . . . . . . . . . . . . . . . . . . .
Audio Language . . . . . . . . . . . . . . . . . . . . . .
Camera Angles . . . . . . . . . . . . . . . . . . . . . . .
Black Level Setting . . . . . . . . . . . . . . . . . . . .
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . .
Virtual Surround . . . . . . . . . . . . . . . . . . . . . .
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . .
LANGUAGE Setting. . . . . . . . . . . . . . . . . . . .
DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . .
AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . .
PARENTAL Setting . . . . . . . . . . . . . . . . . . . .
OTHERS Setting . . . . . . . . . . . . . . . . . . . . . .
Reset to the Default Setting
(Except for PARENTAL Setting) . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
11
12
12
14
14
14
14
14
15
15
15
15
15
16
16
16
16
16
16
16
17
17
18
19
19
20
. . . . . . . 20
Information
If you need additional operating assistance after
reading this owner’s manual, please call
TOLL FREE : 1-800-605-8610
or visit our web site at http://www.funai-corp.com
■
■
■
■
Troubleshooting Guide
Specifications . . . . . . .
Language Code List . .
Limited Warranty . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
21
22
22
22
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Quick Use Guide . . . . . . . . . . . . . . . . . . . . . .Back Cover
Precautions
(WPZ0102TM015/
WPZ0102LTE01/
WPZ0102CAB01)
• Owner’s
Manual
(1VMN21386)
Setup
(WPZ0202NB001)
Functions
• HDMI cable
Information
• Audio/Video
cables
Español
• Remote
control
(NB070UD)
with two AA
batteries
Table of Contents
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 2
Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
Precautions
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible
eye injury.
CAUTION:
CAUTION:
LOCATION:
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO
BEAM.
INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification
is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
For Customer Use:
Read carefully the information located at the bottom of this unit and enter below the Serial No. Retain this information for
future reference.
Model No. _____________________
Serial No. _____________________
–2–
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 3
1) Read Instructions - All the safety and operating instructions should be read before the product is operated.
2) Retain Instructions - The safety and operating instructions should be retained for future reference.
3) Heed Warnings - All warnings on the product and in
the operating instructions should be adhered to.
4) Follow Instructions - All operating and use instructions
should be followed.
5) Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6) Attachments - Do not use attachments not recommended by the product manufacturer as they may
cause hazards.
7) Water and Moisture - Do not use this product near
water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or near
a swimming pool; and the like.
8) Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the
product should follow the manufacturer’s instructions, and should use a
mounting accessory recommended
by the manufacturer.
9) A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to
overturn.
10) Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been
adhered to.
11) Power Sources - This product should be operated only
from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local
power company. For products intended to operate from
battery power, or other sources, refer to the operating
instructions.
12) Grounding or Polarization - This product may be
equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
13) Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
product.
14) Lightning - For added protection for this product during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet. This will prevent damage to the product due to
lightning and power-line surges.
15) Power lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid
of any kind on the product.
18) Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
19) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into
the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions
as an improper adjustment of other controls may
result in damage and will often require extensive
work by a qualified technician to restore the product
to its normal operation,
e) If the product has been dropped or damaged in any
way.
f ) When the product exhibits a distinct change in performance - this indicates a need for service.
20) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
22) Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
–3–
EN
Precautions
IMPORTANT SAFEGUARDS
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 4
Installation Location
Symbols Used in This Manual
Precautions
For safety and optimum performance of this unit:
• Do not stand the unit up vertically. Install the unit in
a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit
directly on top of the TV.
• Shield it from direct sunlight and keep it away from
sources of intense heat. Avoid dusty or humid
places. Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the ventilation
holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.
• Be sure to remove the disc and unplug the AC
power cord from the outlet before carrying the unit.
The following symbols appear in some headings in this manual.
DVD-V
: Description refers to playback of DVD-Video discs.
CD
: Description refers to playback of Audio CDs.
MP3
: Description refers to playback of MP3 files.
WMA
: Description refers to playback of discs formatted
with WMA.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Moisture Condensation Warning
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. Do not use this unit at least for 2 hours
until its inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public
performance and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly
is prohibited.
Notice for Progressive Scan Outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of
picture problems with 525 progressive scan output, it is
recommended that the user switch the connection to the
‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p DVD player,
please contact our customer service center.
Maintenance
SERVICING
¡Please refer to relevant topics on the “Troubleshooting
Guide” on page 21 before returning the product.
¡If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug,
and please call our help line mentioned on the front
page to locate an Authorized Service Center.
CLEANING THE CABINET
¡Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.
CLEANING DISCS
¡When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center out. Do not wipe
in a circular motion.
¡Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog records.
CLEANING THE DISC LENS
¡If this unit still does not perform properly although you
refer to the relevant sections and to “Troubleshooting
Guide” in this Owner’s Manual, the laser optical pickup
unit may be dirty. Consult your dealer or an Authorized
Service Center for inspection and cleaning of the laser
optical pickup unit.
DISC HANDLING
¡When you handle a disc, hold it by its edge and try
not to touch the surface of the disc.
¡Always store a disc in its protective case when it is
not used.
“WMA” (Windows Media Audio) is a new audio codec developed by Microsoft® in the United States of
America.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
–4–
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 5
About the Discs
Playable Discs
Playable
discs
Mark (logo)
DVD-Video
Region code
Recorded
signals
Disc size
Disc types
or
DVD-RW
DVD-R
-
* 1, 3, 4, 5,
6, 7, 9, 10
DVD+RW
DVD+R
* 1, 3, 4, 5,
6, 8, 9, 10
Audio CD
Example
Digital video 12 cm
or
(MPEG2)
8cm
Title 1
Precautions
* 1, 2, 4, 6, 10
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
-
-
Audio CD
Digital audio
Example
* 4, 6, 10
Track 1
CD-RW
CD-R
* 4, 5, 6,
9, 10
-
Digital audio
or
MP3/
WMA*11
12 cm
or
8cm
Track 2
MP3/WMA Example
Track 1
Track 3
Track 4
Track 5
Track 4
Track 5
Group 1
Track 2
Track 3
Track 6
Group 2
Track 6
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL may not be played
back or the picture may be distorted.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back.
Even if they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However,
depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may
not be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying
the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at
all or normally (the picture or sound may not be smooth, etc.).
*9: If there is too much recording space left on a disc (the used portion is less than 55 mm across), it may not play back properly.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.
*11: This DVD/CD player cannot playback the disc contents protected by Windows Media Digital Rights Management (DRM).
Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Unplayable Discs
¡ NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-I/Photo CD / Video CD / DVD with region codes other than 1 or ALL
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers
¡ On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
¡ Any other discs without compatibility indications
–5–
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 6
Setup
Connections
If your TV has AUDIO/VIDEO input jacks, see the following instructions. If not, see the section “Before Using
Your Unit” on the front page.
Connection to a TV
Basic Audio
TV
AUDIO IN
L
R
Method 1
Method 2
Method 3
Good picture
Better picture
Best picture
VIDEO IN
S-VIDEO IN
(INPUT)
COMPONENT
VIDEO IN
Y
Y
PB
CB
or
PR
Video
cable
(supplied)
Audio cable
(supplied)
Setup
This unit
2CH AUDIO
OUT
L
(OUTPUT)
DIGITAL OUT
(PCM/BITSTREAM)
HDMI OUT
S-Video
cable
(commercially
available)
2CH AUDIO
OUT
L
COMPONENT
VIDEO OUT
Y
CR/PR
S-VIDEO
OUT
CR
Component Video cables
(commercially available)
COMPONENT
VIDEO OUT
Y
CR/PR
S-VIDEO
OUT
OPTICAL COAXIAL
R
R
CB/PB
VIDEO
OUT
R
CB/PB
VIDEO
OUT
2CH AUDIO OUT (Analog)
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Hint
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the
copy protection system.
• When progressive scanning mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
If your TV is compatible with 525p (480p) progressive scanning and you want to enjoy the high quality
picture;
Set “PROGRESSIVE” to “ON” in the Display setting. Details are on pages 17-18. You also need to set your TV to progressive
scanning mode.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode. Set “PROGRESSIVE” to “OFF” in the Display setting. Holding [PLAY B] on the front panel or the
remote control for more than 5 seconds will also switch from progressive scanning mode to interlace mode.
After you have completed connections
• Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input
channel (usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the
manual accompanying your TV.
INPUT MODES FOR COMMON TV BRANDS (Example)
• Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
Hitachi:
JVC:
Kenwood:
LXI-Series:
Magnavox:
Panasonic:
RCA:
Samsung:
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO1, VIDEO2, VIDEO3
AUX
00
AUX CHANNEL
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
Sanyo:
Sharp:
Sony:
Toshiba:
Zenith:
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00
The DCDi (Directional Correlational Deinterlacing) system of this DVD player produces smooth and
natural video images, even if really dynamic, by eliminating the jagged edges. *“DCDi” is a trademark
of Faroudja, a division of Genesis Microchip Inc.
–6–
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 7
Connection to a TV with an HDMI Compatible Port
A simple 1-cable connection with a device having an HDMI (High-Definition Multimedia Interface) connector
allows digital transfer of the digital images of DVD-Video and other sources, DVD-Video, and the multi-channel
sound of DVD-Audio.
DIGITAL OUT
(PCM/BITSTREAM)
HDMI OUT
2CH AUDIO
OUT
L
COMPONENT
VIDEO OUT
Y
CR/PR
S-VIDEO
OUT
OPTICAL COAXIAL
R
To HDMI Input
Connector
VIDEO
OUT
CB/PB
HDMI cable
(supplied)
A display equipment with an HDMI compatible port
DVD-Video
Audio Recording Format
Dolby Digital
LPCM
Audio CD
MP3/WMA
Setup
C Actual output modes by media
DOLBY DIGITAL Setting
BITSTREAM *1
PCM
Dolby Digital
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
2channel PCM
*1 If the connected equipment is not compatible with HDMI BITSTREAM, signals are output on PCM.
Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the display
equipment (or an AV amplifier) support a copyright protection system called HDCP (High-bandwidth Digital Content
Protection System). HDCP is copy protection technology that comprises data encryption and authentication of the connected AV equipment.
This player supports HDCP. Please read the operating instructions of your display equipment (or AV amplifier) for more
information.
*HDMI: High Definition Multimedia Interface
NOTES:
• When using an HDMI-incompatible or HDCP-incompatible display equipment, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however, this player cannot be controlled by another device via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency and bit length) may be limited by the equipment that is connected.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In connections with
equipment such as this, audio signals are not output from the HDMI output connector.
• When the set’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-DVI converter cable (commercially available), the signals are output in digital RGB.
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.”
–7–
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 8
Connection to an Audio System
Method 1
Method 2
Stereo system
Analog audio
input jacks
AUDIO
L
OPTICAL
Dolby Digital
decoder, MD deck
or DAT deck
COAXIAL
Digital
audio input
jack
Audio Coaxial
Digital cable
(commercially
available)
R
Optical cable
(commercially
available)
DIGITAL OUT
(PCM/BITSTREAM)
OPTICAL COAXIAL
Audio cable
(supplied)
This unit
Setup
2CH AUDIO OUT
(Analog)
DIGITAL
AUDIO OUT
Setting
Connection
Connecting to a Dolby Digital decoder for
Dolby Digital audio output.
Connecting to the other equipment (an MD deck
or DAT deck etc.) without Dolby Digital decoder.
2CH AUDIO
OUT
L
R
SETUP > QUICK >
DOLBY DIGITAL
BITSTREAM
PCM
* To complete these settings, refer to pages 17-19.
SETUP > QUICK >
DOLBY DIGITAL
PCM
* To complete these settings, refer to pages 17-19.
Setting
Connection
Connecting to Stereo System.
Hint
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
Hint
• The audio source on a disc in a Dolby Digital 5.1 channel surround
format cannot be recorded as digital sound by an MD or DAT deck.
• By hooking this unit up to a Multi-channel Dolby Digital decoder, you
can enjoy high-quality Dolby Digital 5.1 channel surround sound as
heard in the movie theaters.
• Playing a DVD using incorrect settings may generate noise distortion
and may also damage the speakers.
Optical cable (commercially available)
• Optical cable (commercially available) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with
a diameter of 6 inches (15 cm) or more when storing them.
• Use a cable which is 9.8 feet (3 m) or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
Rear Terminals
OPTICAL jack
Connect an optional digital audio cable
here through the optional digital audio in
jack of a decoder or audio receiver.
DIGITAL OUT
(PCM/BITSTREAM)
HDMI OUT jack
Use a HDMI connection cable (supplied)
to connect to a display with an HDMI
compatible port.
HDMI OUT
2CH AUDIO
OUT
L
COMPONENT
VIDEO OUT
Y
CR/PR
COMPONENT VIDEO OUT jacks
Connect optional component video
cables here through the component
video in jacks of a television.
S-VIDEO
OUT
OPTICAL COAXIAL
R
COAXIAL jack
Connect an optional coaxial digital
audio cable here through the coaxial
digital audio in jack of a decoder or
audio receiver.
2CH AUDIO OUT jacks
Connect the supplied
audio cables here
through the audio in
jacks of a television or
other audio equipment.
VIDEO
OUT
CB/PB
VIDEO OUT jack
Connect the supplied yellow
video cable here through the
TV’s video in jack.
–8–
S-VIDEO OUT jack
Connect an optional
S-Video cable here
through the S-video in
jack of a television.
Hint
• When there is video output from the HDMI OUT
jack, no signal is output
from the COMPONENT
VIDEO OUT jacks.
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 9
Front Panel Display
H/ E
D/ G
HDMI indicator
Lights up when there is video signal
output from the HDMI OUT jack.
HDMI Button
Press to set the HDMI connectors
video signal output.
No disc inserted or
cannot read
Displays a type of the disc
which is inserted on the tray.
• DVD: DVD disc
• CD: Audio CD, MP3, WMA
Lights up when the
repeat function is on.
GROUP
Tray open
Tray closed
Lights up when the
progressive scan
system is activated.
Loading the Disc
P.SCAN
DVD
Power off
CD
Lights up when
the ALL repeat
function is on.
HDMI output mode
(480p) is selected
Displays how long the current title or track
has been played back. When a chapter or track is
switched, the number of a new title,
chapter or track is displayed.
Selected HDMI output mode is displayed.
Lights up when the
inserted disc comes
to a pause.
Lights up when playing back
in slow mode. (DVD)
Setup
Lights up when the
A-B repeat function
is on.
Power on
Lights up when the inserted
disc is being played back.
HDMI output mode
(720p) is selected
HDMI output mode
(1080i) is selected
HDMI output mode
(OFF) is selected
HDMI Setup
Press [HDMI] on the front panel to select the HDMI output mode.
The output mode changes as follows every time [HDMI] is
pressed.
• The HDMI indicator on the front panel lights up when HDMI output mode is on.
480P
720P
1080i
hdOFF
480P (Default): Video output from the HDMI OUT jack at 480p.
720P: Video output from the HDMI OUT jack at 720p.
1080i: Video output from the HDMI OUT jack at 1080i.
hdOFF: No video output from the HDMI OUT connector.
–9–
Hint
• Video and audio signals may distorted temporarily when
switching to/from the HDMI output mode.
• Use a display equipment with an HDMI-compatible
port.
• Progressive video signal will not be output from the
COMPONENT VIDEO OUT jacks during the HDMI output mode.
• If the HDMI cable is not connected correctly or the
other equipment is not turned on, the HDMI indicator
on the front panel will not light up even you select the
HDMI mode.
• You can check the HDMI connection status by pressing
[DISPLAY] during playback with the HDMI output mode
(refer to page 7).
• If the TV is not compatible with newly selected HDMI
output mode, the actual output mode will be kept the
one before changing the selection. When this occurs,
the newly selected mode will appear on the front panel
display while the actual output resolution will be indicated by performing the on-screen display as described
above.
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 10
About the Remote Control
Remote Control
STANDBY-ON
Disc
Button
DVD-V
(Alphabetical order)
1
2
3
4
5
6
7
8
9
0
+10
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
9
CD
MP3
WMA
• To select chapter or title
directly.
• To select track directly.
• To move the cursor and
determine its position.
• To move the cursor and
determine its position.
AUDIO
SUBTITLE
ENTER
ANGLE
REPEAT
CLEAR
A-B
PAUSE
0
+10
SKIP
REV
SLOW
FWD
PLAY
REV
FWD
STOP
SETUP
A-B
TOP MENU
MODE
MENU
ENTER
ZOOM
Setup
1
• To repeat between your
chosen point A and B.(CD)
• To select camera angles on
a disc.
AUDIO
• To select audio languages on • To select STEREO,
a disc.
L-ch or R-ch.(CD)
• To clear the markers.(CD)
• To clear the markers.
• To remove status number
• To clear the numbers
in program input.
• To clear the numbers
entered incorrectly.
entered incorrectly.
• To cancel the point for A-B
• To cancel the point for A-B
repeat.
repeat.(CD)
CLEAR
Install two AA batteries (supplied)
matching the polarity indicated inside
battery compartment of the remote
control.
• To search forward/backward
through a disc.
ANGLE
RETURN
Installing the Batteries
for the Remote Control
• To search forward/backward
through a disc.
• To begin slow forward
/reverse playback during
the pause mode.
• To repeat between your
chosen point A and B.
DISPLAY
• To display the current disc
or HDMI mode.
• To display the current disc
or HDMI mode.
MENU
• To call up the Menu
on a disc.
• To call up the file list.
(MP3/WMA)
MODE
• To arrange the playing
• To set black level on/off.
• To set virtual surround on/off. order or play randomly.
• To set virtual surround on/off.
OPEN/CLOSE
• To open or close the disc
tray.
• To open or close the disc
tray.
• To pause disc playback.
• To advance playback
one frame at a time.
• To pause disc playback.
• To begin disc playback.
• To begin disc playback.
REPEAT
• To play a chapter or title
repeatedly.
• To play a track or disc
repeatedly.(CD)
• To play a track, group or disc
repeatedly. (MP3/WMA)
RETURN
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
PAUSE
2
PLAY
3
SEARCH
MODE
Keep in mind the following when
using the remote control:
• Make sure that there is no obstacle
between the remote control and the
remote sensor on the unit.
• The maximum operable ranges
from the unit are as follows.
- Beeline: approx. 23 feet (7m)
- Either side of the center:
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m)
within 15°
- Below: approx. 10 feet (3m)
within 30°
SETUP
H/ E
• To call up the DVD setup
menu.
• Only used to call up the
DVD setup menu.
• To skip chapters.
• To skip tracks.
• To turn the unit on or off.
• To turn the unit on or off.
• To stop playback.
• To stop playback.
SKIP
STANDBY-ON
STOP
SUBTITLE
• To select subtitles on a disc.
TOP MENU
STANDBY-ON
• To search track.
• To search chapter, title or time.
• To search time. (CD)
• To set or search the
• To set or search the
markers.
markers. (CD)
D/ G
ZOOM
• To call up the Top Menu
on a disc.
• To return to the top file of the
highest hierarchy in the program
and file list. (MP3/WMA)
• To magnify part of a picture.
(x2/x4)
– 10 –
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 11
Functions
Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.
Playback
Lights up when power is on.
Before: Turn on the TV, amplifier and any
other equipment which are connected to
this unit. Make sure the TV and audio
receiver (commercially available) are set
to the correct channel.
CD
MP3
WMA
1
OPEN/CLOSE
STANDBY-ON
1
)
⇒Pages 12-13
2
STANDBY-ON
1
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
9
0
+10
1
AUDIO
SUBTITLE
Insert a disc with
label facing up.
3
4
To start
playback
CLEAR
A-B
To stop
playback
SKIP
PAUSE
SLOW
3
4
STOP
PLAY
ANGLE
REPEAT
PLAY
REV
TOP MENU
MENU
Hint
• When you play an MP3/WMA file, details on pages 12-13.
• A “prohibited icon” may appear at the top-right on the TV
screen when the operation is prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or 3 due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a
moment.This happens while the 1st layer is being switched to the
2nd layer.This is not a malfunction.
Fast Forward/Reverse Search
DVD menu
Some discs contain menus which allow you to customize
K / L / s / B] to select an item, then
DVD playback. Use [K
press [ENTER] (or [PLAY B]), to select.
DVD-V
CD
MP3
WMA
E1
Press [REV h] or [FWD g] repeatedly during playback to select the required forward or
reverse speed.
To continue playback, press [PLAY B].
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
Hint
• For DVDs, fast forward or reverse search speed is different depending on
the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50) and 5(x100).
• For Audio CDs, approximate speed is 1(x2), 2(x8) and 3(x30).
• For MP3/WMA, approximate speed is 1(x2), 2(x8), 3(x30).
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Resume
DVD-V
3 4
TIP:
You can change the on-screen language in “PLAYER MENU”
setting. (Refer to page 17.)
FWD
STOP
SETUP
2
1
D/ G
Slow Forward/Slow Reverse
CD
MP3
WMA
Press [STOP C]. Resume message will appear on the TV
screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
1
DVD-V
Press [REV h] or [FWD g] repeatedly during the pause mode to select the required forward or reverse speed.
To continue playback, press [PLAY B].
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Hint
<Example : DVD>
Resume information stays on even when unit is in standby mode.
• Slow forward or reverse speed is different depending on the disc.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the
slow playback mode are blurred. (Refer to pages 17-18.)
Hint
Zoom
• To cancel resume, press [STOP C] one more time during the stop mode.
• For MP3/WMA, playback will resume from the beginning of the track
at which playback was stopped.
• The resume information will be kept even when unit is in standby mode.
Press [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
DVD-V
x2
Paused and Step-by-Step Playback
DVD-V
CD
MP3
x4
WMA
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
K / L / s / B] to slide the zoomed picture across the
Use [K
screen.
To exit zoom function, press [ZOOM] repeatedly to select
OFF.
DVD-V
The disc goes forward by one frame each time [PAUSE F]
is pressed during the pause mode.
To continue playback, press [PLAY B].
Hint
Hint
• On DVDs, set “STILL MODE” to “FIELD” in the Display menu if pictures in the pause mode are blurred. (Refer to pages 17-18.)
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• The picture may be distorted when you press [PAUSE k] or
[REV h] repeatedly in the zoom mode.
• It may take several seconds to slide the zoomed picture.
– 11 –
EN
Functions
(
DVD-V
H/ E
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 12
MP3/WMA Playback
MP3/WMA is a method of compressing files. You can copy MP3/WMA files on CD-R/RWs from the computer and play the files on this unit.
MP3
2
WMA
Insert an MP3-format disc, then press [MENU]
to call up the file list on the TV screen.
1
MENU
FOLDER
MP3
WMA
DISC NAME
3
3
ENTER
PLAY
ENTER
or
PLAY
Refer to “Resume” on page 11.
Hint
FILE LIST
3
STOP
folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3
1/ 2
folder name 1
When selecting the folder:
B] when you want
• Press [B
to go to the next hierarchy.
s] when you
• Press [s
want to go back to the
previous hierarchy
(except for the top
hierarchy).
• Some selections may take a while to be recognized.
• Press [TOP MENU] to return to the first item.
• Folders are known as Groups; files are known as Tracks.
• MP3 files are accompanied by 3 icon.
• WMA files are accompanied by
icon.
• Folders are accompanied by
icon.
• A maximum of 255 folders can be recognized.
• A maximum of 999 files can be recognized.
• Up to 8 hierarchies can be created.
This player recommends the files recorded under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz (MP3/WMA)
• Constant bit rate: 32kbps ~ 320kbps (MP3), 48kbps ~ 192kbps (WMA)
• For MP3/WMA file recorded in Variable Bit Rate(VBR), the unit may not display the actual elapsed time.
• Copyright protected WMA files will not play on this DVD/CD player.
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
DVD-V
CD
Functions
Functions
1
DISPLAY
Angle icon, appears only when available on the DVD
Current playback status
DISPLAY
Current playback status
1
T
11/16 0:00:00 - 0:03:30
Remaining time of the current chapter
Elapsed time of the current chapter
DISPLAY
CH(Chapter):
Current chapter number / Total chapters
2
DISPLAY
2
4/12 0:03:21 - 0:02:15
1/3
4/12 0:13:45 - 0:45:40
T
Current repeat setting appears only
when the repeat setting is active
T: Track repeat
A: All Tracks repeat
A B: A-B repeat
Remaining time of the entire disc
Elapsed time of the entire disc
0:00:00 - 1:23:45
Remaining time of the current title
Elapsed time of the current title
TT(Title):
Current title number / Total titles
Remaining time of the current track
Elapsed time of the current track
TR(Track):
Current track number / Total tracks
ALL:
Current track number / Total tracks
DISPLAY
DISPLAY
3
T
L1
3
Layer numbers, appears only when
playing a two-layered Disc
L0: Layer 0 is playing
L1: Layer 1 is playing
Current repeat setting appears only
when the repeat setting is active
C: Chapter repeat / T: Title repeat /
A B: A-B repeat
DISPLAY
4
VIDEO INFO. : YCbCr/1080i
AUDIO INFO. : BITSTREAM
MAX CHANNEL : 2ch
Current HDMI status
• Image output / Resolution of image
• Sound output format
• Maximum number of audio channels
DISPLAY
4
BIT RATE: The amount of audio and
video data currently being read
Current HDMI status
• Image output / Resolution of image
• Sound output format
• Maximum number of audio channels
VIDEO INFO. : YCbCr/1080i
AUDIO INFO. : BITSTREAM
MAX CHANNEL : 2ch
Hint
• When you are playing a disc in PROGRAM or RANDOM mode,
PROGRAM (or RANDOM) will be displayed instead of 2 .
DISPLAY
5
– 12 –
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 13
MP3
WMA
DISPLAY
DISPLAY
Current playback status
1
3
1/36 0:01:15
T
DISPLAY
3
3
TRACK 01
The name of the file currently in
play will be displayed.
DISPLAY
2
Current playback status
1
TRACK 01
The name of the file currently in
play will be displayed.
TR(Track):
Current track number / Total tracks
Current repeat setting, if active
T: Track repeat
G: Group (folder) repeat
A: Disc repeat
Elapsed playing time of the current
track
DISPLAY
2
TITLE NAME
Title name based on tag
information currently in play will
be displayed.
DISPLAY
RANDOM
PROGRAM
or
(Only when you are playing a disc in PROGRAM or RANDOM mode.)
3
ARTIST NAME
Artist name based on tag
information currently in play will
be displayed.
DISPLAY
4
VIDEO INFO. : YCbCr/1080i
AUDIO INFO. : BITSTREAM
MAX CHANNEL : 2ch
Current HDMI status
• Image output / Resolution of image
• Sound output format
• Maximum number of audio channels
4
1/36 0:01:15
T
DISPLAY
5
DISPLAY
TR(Track):
Current track number / Total tracks
Current repeat setting, if active
T: Track repeat
G: Group (folder) repeat
A: Disc repeat
Elapsed playing time of the current
track
RANDOM
PROGRAM
or
Functions
DISPLAY
(Only when you are playing a disc in PROGRAM or RANDOM mode.)
5
DISPLAY
6
VIDEO INFO. : YCbCr/1080i
AUDIO INFO. : BITSTREAM
MAX CHANNEL : 2ch
Current HDMI status
• Image output / Resolution of image
• Sound output format
• Maximum number of audio channels
DISPLAY
7
– 13 –
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 14
Search Function
Title / Chapter Search
Track Search
CD
MP3
WMA
Using [SEARCH MODE]
1
SEARCH
MODE
Time Search
DVD-V
DVD-V
Using [SEARCH MODE]
1
/29
CD
1
PLAY
TOTAL 1:29:00
/12
SEARCH
MODE
2
1
2
3
4
5
6
7
8
9
0
+10
Press once for the
Chapter Search.
Press twice for the
Title Search.
/29
within 30 seconds
2
• For the disc with less than 10 tracks, press
the track number directly.
1
2
3
4
5
6
7
8
9
0
+10
• For discs with more than 10 but less than
99 tracks, to play a single-digit track, press
[0] first, then the track number (e.g. for
track 3, press [0],[3]). To play a doubledigit track, press the track number.
• For discs with more than 100 tracks, to
play a single or a double-digit track, press
[0] first, then the track number (e.g. for
track 3, press [0], [0],[3], and for track 26,
press [0], [2], [6]). To play a triple-digit
track,press the track number.
SKIP
Using [SKIP H , G ]
1
PLAY
Functions
SKIP
TR 1 TR 2 TR 3 TR 4
SKIP
Hint
• [+10] button can also bring the Track Search
display, except for the disc with less than 10
tracks. For such a disc, track search can be
done by just pressing the track number.
CH 1 CH 2 CH 3 CH 4
SKIP
SKIP
or
Current Title
(TT)
Press repeatedly until
the Time Search display
appears.
1
2
3
4
5
6
7
8
9
TOTAL 1:29:00
0
within 30 seconds
SKIP
within 30 seconds
Hint
• When there is no need to enter a number,
“0” appears automatically.
For example, “0: 0-: --” appears in the Time
Search display if the total time of the title
or track is less than 10 minutes.
• Press [CLEAR] to erase the incorrect
input at step 2.
TT 1 TT2 TT3 TT4
SKIP
(If the disc has no chapters)
Current Track
(TR)
SKIP
2
/12
Using [SKIP H , G ]
Current Chapter
1
(CH)
PLAY
SEARCH
MODE
Hint
• Depending on the disc being played, this
function can also be performed by directly
entering the desired chapter number with
the Number buttons. Refer to the manual
accompanying the disc.
• For CDs and MP3/WMA, Track Search is
not available for Programmed or Random
Playback.
Marker Setup
DVD-V
CD
This feature allows you to assign a specific
point on a disc to be called back later.
To set a marker
1
To return to the marker
later
1
To exit the marker display
1
RETURN
PLAY
PLAY
SEARCH
MODE
SEARCH
MODE
Press repeatedly until
the marker display
appears.
Press repeatedly until
the marker display
appears.
2
or
2
or
3
ENTER
3
Hint
• The Marker display will disappear in about
30 seconds when there is no output.
• To clear a marker, select the marker to be
cleared at step 2 in the section “To set a
marker” or “To return to the marker later”
and then press [CLEAR].
• Opening the disc tray or putting unit in
standby mode will erase all markers.
• Selecting “AC” at step 2 in the section “To
set a marker” or “To return to the marker
later” will also erase all markers.
ENTER
at the desired marker
• Playback will restart from the specific point
which you set.
– 14 –
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 15
Repeat / Random / Programmed Playback
DVD-V
MP3
Repeat A-B Playback
CD
DVD-V
WMA
Programmed Playback
CD
CD
MP3
1
PLAY
Repeat function is available only during
playback.
A-
1
STOP
A-B
1
PLAY
CD-DA
at your desired starting point (A)
2
REPEAT
MODE
at your desired end point (B)
or
track as point A.
TITLE
(current title repeat)
OFF
(repeat off)
TRACK
(current track repeat)
Hint
• To exit the sequence, press [A-B] so that
OFF appears.
• To cancel Point A, press [CLEAR].
• This function does not work in the other
repeat modes.
ENTER
CD
ALL
(entire disc repeat)
OFF
(repeat off)
MP3
Random Playback
This function shuffles the playing order of
tracks instead of playback in the sequence.
MP3
CD
WMA
1
STOP
WMA
TRACK
<Example: CD>
CD-DA
• Point B should be in the same title or
CHAPTER (current chapter repeat)
ENTER
Press once.
A-B
A-B
TOTAL 0:00:00
2
Each time you press [REPEAT], repeat
function changes as example below.
DVD-V
WMA
You may determine the order in which
tracks will play.
TOTAL 1:03:30
1
5
10
11
12
17
22
3:30
5:10
4:20
3:00
3:20
4:10
2:50
2/3
• Up to 99 tracks can be
ordered.
• If eight or more tracks were in a
program, use [SKIP H, G]
to see all the tracks.
• While an MP3/WMA folder
is open:
B] when you want
–Press [B
to go to the next hierarchy.
s ] when you want
–Press [s
to go back to the previous
hierarchy (except for the
top hierarchy).
3
RANDOM
CD-DA
(current track repeat)
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
PLAY
MODE
GROUP
(current group repeat)
ALL
(entire disc repeat)
OFF
(repeat off)
PLAY
Press twice.
<Example: CD>
• Press [CLEAR] at step 2 to erase the most
recently entered track.
2
• To erase all programmed tracks at once,
select “ALL CLEAR’’ and press [ENTER] at
step 2.
PLAY
Hint
• In the track or group repeat setting will be
cleared when moving to another title,
chapter, track or group.
• Repeat playback may not function with
some discs or during repeat A-B playback.
Hint
Hint
• To repeat the current track in the random
selections, press [REPEAT] repeatedly
until “
TRACK” appears during playback.
• To repeat the entire random selections,
press [REPEAT] repeatedly until “
ALL”
appears during playback.
• While a program is being played back,
[STOP C] works as follows;
⇒Press [STOP C] and [PLAY B] next, so
that the programmed playback restarts.
(CD playback restarts from the current
point. MP3/WMA playback restarts from
the beginning of the current track.)
⇒Press [STOP C] twice and [PLAY B]
next, so that playback restarts from the
first track in the original order. However,
your programmed playback can be
restarted when you follow above steps.
(Your programs are still stored until either
the disc is removed or unit is put in
standby mode.)
• To repeat the current track in the program,
press [REPEAT] repeatedly until
“
TRACK’’ appears during playback.
• To repeat the entire program, press
[REPEAT] repeatedly until “
ALL’’
appears during playback.
– 15 –
EN
Functions
Repeat Playback
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 16
Special Settings
Subtitle Language
Audio Language
2
ENTER
DVD-V
OFF
DVD-V
This unit allows you to select a subtitle
language (if available) during DVD playback.
This unit allows you to select an audio
language (if multiple languages are
available) during DVD playback.
1
1
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
3
RETURN
PLAY
PLAY
1.ENG/6
1.ENG Dolby D 3/2.1ch 48k/3
Stereo Sound Mode
AUDIO
SUB TITLE
CD
Each time you press [SUBTITLE], subtitle
language changes as example below.
ENG
Each time you press [AUDIO], audio
language changes as example below.
(English subtitles)
ENG
(English audio)
(French subtitles)
SPA
(Spanish audio)
This unit allows you to select a sound
mode during CD playback.
1
PLAY
STEREO
AUDIO
...
...
FRE
OFF
(no subtitles)
FRE
(French audio)
To set subtitle ON/OFF
Hint
1
• Some discs will only allow you to change
the audio setting from the disc menu. Refer
to the manual accompanying the discs for
details.
Functions
PLAY
1.ENG/6
Each time you press [AUDIO], sound
mode changes as example below.
STEREO (right and left channels
are active)
(left channel is active)
L-ch
(right channel is active)
R-ch
SUB TITLE
Camera Angles
2
Virtual Surround
DVD-V
OFF
Hint
• If your language is not shown after pressing [AUDIO] or [SUBTITLE] several times,
the disc may not have that language.
However, some discs allow audio language
or subtitle language setting on the disc
menu. (Operation varies depending on the
disc, so refer to the manual along with the
disc.)
• When “NOT AVAILABLE” appears on the
TV screen, it means no subtitle is recorded
on the scene.
• If you choose a language that has a threeletter-language code, the code will be displayed every time you change the subtitle
language setting. If you choose any other
languages, ‘---’ will be displayed instead.
(Refer to page 22.)
• Some discs will only allow you to change
the subtitle from the disc menu. Refer to the
manual accompanying the discs for details.
Some DVD discs may contain scenes which have been
shot simultaneously from various angles. You can change the camera angle if the (
) icon appears on
the screen. If the “ANGLE ICON” setting is “OFF” in the OTHERS menu, the
(
) icon will not appear. (Refer to
pages 17-20.)
DVD-V
CD
MP3
WMA
You can enjoy stereophonic virtual
world on your existing 2 channel stereo
system.
1
PLAY
1
OFF
MODE
PLAY
1/8
Press twice (once for CD and MP3/WMA).
ANGLE
2
ENTER
1
Black Level Setting
1: Natural effect.
2: Emphasized effect.
OFF: No effects (original sound).
DVD-V
Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.
1
PLAY
3
RETURN
ON
Hint
MODE
For CD playback only
• Virtual Surround will not be effective if the
sound mode is set to something other than
STEREO. Refer to “Stereo Sound Mode”.
– 16 –
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 17
DVD Setup
Q UICK SETUP Men u
You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.
1
2
SETUP
STOP
or
Select the desired item.
<SETUP MENU>
Confirm that “QUICK” is selected.
ENTER
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
A Step 5
P17
P18
P18
P19
QUICK SETUP
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
ENTER
ENTER
B Step 5
B Step 5
C Step 5
• Refer to the sections “PLAYER MENU”, “TV ASPECT”,
“PROGRESSIVE or “DOLBY DIGITAL” on pages 17-19.
CUSTOM Men u
You can change the settings of the DVD/CD player.
• QUICK on pages 17-20 indicates DVD Setup menus also accessible from the QUICK SETUP menu.
1
2
SETUP
STOP
<SETUP MENU>
3
or
ENTER
or
Select the desired item.
Select “CUSTOM”.
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
OK
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
DISPLAY menu
AUDIO menu
DISPLAY
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
ENTER
ENTER
page 17 A
TV ASPECT
STILL MODE
PROGRESSIVE
PROGRESSIVE MODE
FORMAT
RGB RANGE
4:3 LETTER BOX
AUTO
OFF
AUTO 1
RGB
NORMAL
ORIGINAL
OFF
ENGLISH
ENGLISH
ENTER
OK
LANGUAGE menu
A
LANGUAGE
QUICK SETUP
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
Functions
ENTER
PARENTAL menu
AUDIO
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
OTHERS
PARENTAL LEVEL
ANGLE ICON
ON
AUTO POWER OFF ON
PANEL DISPLAY BRIGHT
ALL
ENTER
ENTER
page 18 B
page 19 C
OTHERS menu
ENTER
page 19 D
page 20 E
LANGUAGE Setting
Follow steps 1 to 3 in the “CUSTOM Menu” section above.
4
5
Select the desired item.
Select the desired language.
ENTER
6
To exit the menu
ENTER
SETUP
or
or
<LANGUAGE” menu>
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ENTER
ORIGINAL
OFF
ENGLISH
ENGLISH
AUDIO ∗1 ∗2
(Default: ORIGINAL)
Sets the audio language.
AUDIO
ORIGINAL
ENGLISH
FRENCH
SUBTITLE: ∗1 ∗2
(Default: OFF)
Sets the subtitle language.
SUBTITLE
OFF
ENGLISH
FRENCH
DISC MENU: ∗1
(Default: ENGLISH)
Sets the language in DVD
menu.
DISC MENU
ENGLISH
FRENCH
SPANISH
PLAYER MENU: QUICK
(Default: ENGLISH)
Sets the language for the
On-Screen Display.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
– 17 –
Hint
∗1
• Language options are not available
with some discs.
• If “OTHER” is selected in the “AUDIO,
SUBTITLE” or “DISC MENU” screen,
press four-digit number to enter the
code for the desired language. (Refer
to the language code list on page 22.)
• Only the languages supported by the
disc can be selected.
∗2
• Language setting for Audio and
Subtitle are not available with some
discs. Then press [AUDIO] and
[SUBTITLE]. Details are on page 16.
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 18
B
DISPLAY Setting
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 17.
4
Select the desired item.
5
6
TV ASPECT: QUICK
(Default: 4:3 LETTER BOX)
See Hint to the right.
Select the
desired
setting.
TV ASPECT
TV ASPECT
STILL MODE
PROGRESSIVE
PROGRESSIVE MODE
FORMAT
RGB RANGE
or
4:3 LETTERBOX
AUTO
OFF
AUTO 1
RGB
NORMAL
DISPLAY menu
DISPLAY
ENTER
TV ASPECT
STILL MODE
PROGRESSIVE
PROGRESSIVE MODE
FORMAT
RGB RANGE
4:3 LETTER BOX
AUTO
OFF
AUTO1
RGB
NORMAL
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
16:9 SQUEEZE
Hint
ENTER
Select the
desired
setting.
STILL MODE
TV ASPECT
STILL MODE
PROGRESSIVE
PROGRESSIVE MODE
FORMAT
RGB RANGE
4:3 LETTERBOX
AUTO
OFF
AUTO 1
RGB
NORMAL
ENTER
AUTO
FIELD
FRAME
or
ENTER
PROGRESSIVE MODE:
(Default: AUTO1)
See Hint to the right.
Select the
desired
setting.
PROGRESSIVE MODE
TV ASPECT
STILL MODE
PROGRESSIVE
PROGRESSIVE MODE
FORMAT
RGB RANGE
SETUP
ENTER
or
STILL MODE:
(Default: AUTO)
See Hint to the right.
4:3 LETTERBOX
AUTO
OFF
AUTO 1
RGB
NORMAL
AUTO1
AUTO2
VIDEO1
VIDEO2
VIDEO3
ENTER
or
ENTER
Functions
FORMAT:
(Default: RGB)
See Hint to the right.
TV ASPECT
STILL MODE
PROGRESSIVE
PROGRESSIVE MODE
FORMAT
RGB RANGE
4:3 LETTERBOX
AUTO
OFF
AUTO1
YCbCr
NORMAL
4:3 LETTERBOX
AUTO
OFF
AUTO 1
RGB
NORMAL
ENTER
RGB RANGE:
(Default: NORMAL)
See Hint to the right.
TV ASPECT
STILL MODE
PROGRESSIVE
PROGRESSIVE MODE
FORMAT
RGB RANGE
4:3 LETTERBOX
AUTO
OFF
AUTO1
RGB
ENHANCED
4:3 LETTERBOX
AUTO
OFF
AUTO 1
RGB
NORMAL
ENTER
5
If “PROGRESSIVE” is “ON”,
this message appears:
PROGRESSIVE: QUICK
(Default: OFF)
See Hint to the right.
TV ASPECT
4:3 LETTERBOX
STILL MODE
AUTO
PROGRESSIVE OFF
PROGRESSIVE MODE
AUTO 1
FORMAT
RGB
RGB RANGE
NORMAL
ENTER
6 To confirm the
PROGRESSIVE
scanning mode
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
SETUP
4:3 LETTERBOX
AUTO
ON
AUTO 1
RGB
NORMAL
A c t i va t e P r o gr e s s i ve ?
NO
YES
SET:ENTER
If you do not press any buttons
for 15 seconds, Progressive
Scan will switch to “OFF”. Select
YES.
ENTER
Confirm again to use progressive scan.
If Picture is good, Select “YES”.
or
ENTER
NO
YES
SELECT: K / L
Select
YES.
NOTE: If there is no picture or picture is
distorted after selecting “YES”,
wait about 15 seconds for auto recovery.
SELECT: K / L
SET:ENTER
– 18 –
To exit
the menu
or
TV ASPECT:
• Select “4:3 LETTER BOX”,
so that black bars may
appear on the top and bottom of the screen.
• Select “4:3 PAN & SCAN”
for a full height picture with
both sides adjusted.
• Select “16:9 WIDE” if a
wide-screen TV is connected to this unit.
• Select “16:9 SQUEEZE” when
the TV screen is too large
horizontally at “16:9 WIDE”
setting and when it is possible
to adjust the screen size
using the TV’s controls.
STILL MODE:
• Select “AUTO” usually.
• If you select AUTO, automatically select the best resolution
setting (FRAME or FIELD)
based on the data characteristics of the pictures. (default)
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
• An individual picture on TV
screen is called a “frame”, which
consists of two separate images
called as “field”.
Some pictures may be blurred at
the AUTO setting in the still mode
due to their data characteristics.
PROGRESSIVE MODE:
• You can select a mode below
for the progressive scan output.
• AUTO1: mode suitable for
images on the film
material.
• AUTO2: mode for images on
the material of 30frame film.
• VIDEO1: mode for normal video
material.
• VIDEO2: mode for video
material with less
movements.
• VIDEO3: mode for video
material with many
movements.
FORMAT:
• Select an HDMI output mode
between YCbCr and RGB.
• When the connected equipment
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
• This setting is effective only when
you use the HDMI connection.
RGB RANGE:
• Select a HDMI picture mode
between NORMAL and
ENHANCED.
• Select ENHANCED if the blackwhite contrast is not clear.
• This setting is effective only for
HDMI RGB output.
PROGRESSIVE:
• You can set “PROGRESSIVE”
to “OFF” either in the Display
menu or by pressing and holding [PLAY B] on the front of the
unit for more than 5 seconds.
• When “PROGRESSIVE” is “ON”,
video signals from VIDEO OUT
and S-VIDEO OUT jacks will be
distorted or not be output at all.
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 19
C
AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to
3 in the “CUSTOM Menu” section on page 17.
5
Select the desired item.
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DRC
DOWN SAMPLING
DOLBY DIGITAL
or
<AUDIO menu>
ON
ON
BITSTREAM
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ENTER
ON
ON
BITSTREAM
Hint
ON
OFF
BITSTREAM
ENTER
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital receiver.
• BITSTREAM: Outputs a Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2 channel).
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
ON
ON
PCM
ENTER
D
SETUP
OFF
ON
BITSTREAM
ENTER
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
6 To exit the menu
DRC:
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing disc with
copyright protection, the
sound will be down sampled at 48kHz, even if
you set to “OFF”.
• This function is available
only on digital outputting
of a disc recorded in
96kHz.
Functions
4
PARENTAL Setting
Parental Control limits the disc viewing that exceed your settings. (An incorrect password will be not acceptable.)
This feature prevents your children from viewing inappropriate materials.
Parental Le vels
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.
Follow steps 1 to 3 in the “CUSTOM Menu” section on page 17.
4
5
Enter your desired fourdigit password (except
for 4737).
1
2
6
Select “PARENTAL
LEVEL”.
7
Select the
desired level.
SETUP
3
4
5
6
7
8
9
0
ENTER
or
PARENTAL LEVEL
PASSWORD CHANGE
ENTER
ALL
<PARENTAL menu>
PASSWORD
ENTER
or
If you have set a password already,
enter the current four-digit
password.
To exit
the menu
or
ENTER
PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]
CONTROL LEVELS
• ALL:
All parental locks are cancelled.
• Level 8:
DVD softwares of any grades (adult/general/children) can be played back.
• Levels 7 to 2: Only DVD softwares intended for general use and children can be played back.
• Level 1:
Only DVD softwares intended for children can be played back, with those
intended for adult and general use prohibited.
TIPS FOR LEVELS
• 7 [NC-17]:
No one under 17 admitted
• 6 [R]:
Restricted; under 17 requires accompanying parent or adult guardian
• 4 [PG13]:
Unsuitable for children under 13
• 3 [PG]:
Parental Guidance suggested
• 1 [G]:
General Audience
Hint
ENTER
• DVD-Video discs may not respond to the parental lock settings. Make sure this function
works with your DVD-Video discs.
Instructions continue on the next page.
– 19 –
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 20
To Chang e the Pass w or d f or Parental Controls
You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 17.
4
5
Enter your desired fourdigit password (except
for 4737).
1
2
3
4
5
6
7
8
9
6
Select “PASSWORD
CHANGE”.
or
ENTER
PARENTAL LEVEL
PASSWORD CHANGE
0
ALL
1
2
3
4
5
6
7
8
9
<PARENTAL menu>
SETUP
ENTER
• Record the password in case
you forget it.
• If you forget the password,
press [4], [7], [3], [7] at step 4,
then enter your new password.
• Password will be cleared and
parental levels will be set to “ALL”.
PASSWORD
E
To exit
the menu
Hint
0
ENTER
ENTER
7
Enter your new
four-digit password
(except for 4737).
OTHERS Setting
You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 17.
4
Select the desired item
5
ANGLE ICON: (Default: ON)
Set to “ON” to show the angle icon when multiple camera angles are
available during DVD playback.
6 To exit the menu
SETUP
or
OFF
ON
ANGLE ICON
ON
AUTO POWER OFF ON
PANEL DISPLAY
BRIGHT
ENTER
<OTHERS menu>
Functions
AUTO POWER OFF: (Default: ON)
Set to “ON” to turn this unit off automatically after 30 minutes of no use.
OTHERS
ANGLE ICON
ON
AUTO POWER OFF ON
PANEL DISPLAY
BRIGHT
ANGLE ICON
ON
AUTO POWER OFF ON
PANEL DISPLAY BRIGHT
ON
OFF
ENTER
ENTER
PANEL DISPLAY: (Default: BRIGHT)
This adjusts the brightness of the panel display.
See Hint to the right.
ANGLE ICON
ON
AUTO POWER OFF ON
PANEL DISPLAY
BRIGHT
PANEL DISPLAY
BRIGHT
DIMMER
AUTO
Select the
desired
setting
ENTER
or
Hint
PANEL DISPLAY:
• When AUTO is selected,
the display dims only during
playback.
ENTER
Reset to the Default Setting (Except for PARENTAL Setting)
1
STOP
SETUP
2
4
3
or
or
To exit
the menu
SETUP
<SETUP MENU>
Select “INITIALIZE”.
OK
Select “YES”.
QUICK SETUP
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
ENTER
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
INITIALIZE
Initialize?
NO
YES
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
OK
ENTER
– 20 –
ENTER
Press
twice.
Hint
• When you cancel
to initialize at step
3, select “NO”.
EN
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 21
Information
Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit consulting the following checklist.
Problem
Solution
– Check if the AC power cord is properly connected.
– Unplug the outlet once, and wait for 5-10seconds and then plug it in again.
No sound or picture
– Check if the TV is switched on.
– Check the video connection and HDMI.
– Check the VIDEO/AUDIO cable connections to the TV. (See Connection to a TV.)
– When signals are output from the HDMI OUT jack, signals (interlace/progressive) are not output from the COMPONENT VIDEO OUT jacks. Press
the HDMI button on the front panel to set the HDMI output mode to “OFF”.
– Set PROGRESSIVE correctly. Turn it on only if your TV has Progressive
Scan and you are using the Component Video connections between the unit
and the TV. Disable Progressive Scan for all other connections. (See page 6.)
Distorted picture
– Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
– Connect the unit directly to the TV.
Completely distorted picture or
– Connect the unit directly to the TV.
black/white picture with DVD
– Make sure the disc is compatible with the unit.
– Check if the INTERLACE/PROGRESSIVE mode is set correctly. (See pages 17-18.)
No sound or distorted sound
– Adjust the volume.
– Check that the speakers are connected correctly.
No audio at digital output
– Check the digital connections.
– Check if the audio format of the selected audio language matches your
receiver capabilities.
No DTS audio is output
– This unit does not support DTS audio.
This is not a malfunction.
No image from HDMI connection
– Check the HDMI connection. (Check the status of the HDMI related indications.)
– Check whether the connected monitor equipment or other equipment
supports HDCP. (This player will not output a video signal unless the other
equipment supports HDCP.)
– Check the setting of HDMI.
– Check whether the output format of this player (HDMI FORMAT) matches the
supported input format of other connected equipment.
Picture freezes momentarily
– Check the disc for fingerprints/scratches and clean with a soft cloth wiping
during playback
from center to edge.
– Clean the disc.
Disc can’t be played
– Clean the disc.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– Cancel the parental lock or change the control level.
– Insert a correct disc that plays on this unit.
– Handle a disc with special care so that it does not have fingerprints,
scratches, or dusts on its surface.
No return to start-up screen when disc is removed – Reset the unit by switching the unit off, then on again.
The unit does not respond to
– Aim the remote control directly at the sensor on the front of the unit.
the remote control
– Reduce the distance to the unit.
– Replace the batteries in the remote control.
– Re-insert the batteries with their polarities (+/– signs) as indicated.
– Tune your radio to an empty AM station so that you hear a lot of noises.
Then, turn the volume up. If you hear some signal sound from the radio by
pressing buttons on the remote control, the remote control is working.
Buttons do not work or the unit stops
– To completely reset the unit, unplug the AC
responding
cord from the AC outlet for 5-10 seconds.
The unit does not respond to some
– Operations may not be permitted by the disc.
operating commands during playback
Refer to the instructions of the disc.
The unit cannot read CDs/DVDs
– Use a commonly available cleaning CD/DVD to clean the lens before sending the unit for repair.
Angle does not switch
– The angle cannot be switched for DVDs which do not contain multiple
angles. In some cases multiple angles are only recorded for specific scenes.
Playback does not start when the title is selected – Check the “PARENTAL” setting.
The password for rating level has been forgotten – Enter the default password “4737”, then your forgotten password will be cleared.
NOTES:
•
•
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual
for more details on correct operations.
Playback from a desired track and random playback are not available during program playback.
Some functions are prohibited on some discs.
– 21 –
EN
Information
No power
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 22
Specifications
Output signal format:
NTSC color
Power source:
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption:
14 W (standby: 0.8 W)
Operating temperature:
41°F (5°C) to 104°F (40°C)
Dimensions:
W : 17 1/16" (433 mm)
H : 2 3/8”
(61 mm)
D : 11 13/16" (300 mm)
Weight :
Approx 5.1 lbs (2.3 kg)
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between languages, the default language will be
English.
Language Code List
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
Language
Code
Language
Code
Language
Code
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
6565
6557
6558
6561
5165
6567
6569
6568
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language
setting on page 16. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)
Information
Limited Warranty
FUNAI CORP. will repair this MAGNAVOX product, free of charge in
the USA in the event of defect in materials or workmanship as follows:
DURATION:
FUNAI CORP. will provide parts to replace defective
PARTS:
parts without charge for one (1) year from the date of
original retail purchase. Certain parts are excluded
from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for
a period of ninety (90) days from the date of original
retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail purchase will be required
together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the
product are altered, replaced, defaced, missing or if service was
attempted by an unauthorized service center. This MAGNAVOX
Limited warranty does not apply to any product not purchased and
used in the United States.
This product is produced for home use and this warranty only covers
failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment,
or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident,
misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product or damage which results from fire, flood,
lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC
PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL
IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR
CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST
BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO A
FUNAI AUTHORIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO
STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU
ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF
THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN
OF THIS PRODUCT WITHOUT PRIOR NOTICE.
To locate your nearest AUTHORIZED SERVICE CENTER or for general
service inquiries, please contact us at:
– 22 –
FUNAI CORPORATION
Customer Service
Tel :1-800-605-8610
http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501
EN
✄
Language
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 23
Español
4
Conexiones
Si su televisor tiene entradas
de AUDIO/VIDEO vea la sección “Connection to a TV” en la
página 6 en el Manual de
Manejo. En caso contrario, vea
la sección “Before Using Your
Unit” en la página del frente en
el Manual de Manejo.
Reproducción
Antes:
¡Encienda el televisor, amplificador y
otros equipos conectados a esta
unidad. Asegúrese que el televisor y el
sintonizador de audio (de venta en los
comercios) están en el canal correcto.
STANDBY-ON
1
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
Instalación de las pilas
en el control remoto
3
2
1
1
CLEAR
A-B
PAUSE
9
+10
FWD
Disco
1
2
3
4
5
6
7
8
9
0
+10
REV
FWD
A-B
✄
• Para seleccionar
directamente la canción.
• Para mover el cursor y
determinar la posición.
• Para mover el cursor y
determinar la posición.
• Para buscar en avance/
retroceso por un disco.
• Para empezar la reproducción
en avance lento/retroceso
durante el modo de pausa.
• Para buscar en avance/
retroceso por un disco.
• Para borrar los marcadores.
• Para borrar los números mal
entrados.
• Para borrar el punto para la
repetición A-B.
• Para borrar los marcadores.
(CD)
• Para eliminar el Nº de estado
en la entrada de programa.
• Para borrar los números mal
entrados.
• Para borrar el punto para la
repetición A-B.(CD)
• Para indicar el modo de
disco actual o modo de HDMI.
• Para indicar el modo de
disco actual o modo de HDMI.
• Para llamar el Menú en un
disco.
• Para llamar la lista de archivo
(MP3/WMA)
• Para activar/desactivar el
nivel del negro.
• Para activar/desactivar el
ambiental virtual.
• Para disponer el orden de reproducción
o la reproducción aleatoria.
• Para activar/desactivar el
ambiental virtual.
MENU
MODE
QUICK SETUP
OPEN/CLOSE
OK
• Para abrir o cerrar la bandeja • Para abrir o cerrar la bandeja
del disco.
del disco.
• Para hacer una pausa en la reproducción. • Para hacer una pausa en la
• Para avanzar la reproducción un cuadro
reproducción del disco.
cada vez.
PAUSE
ENTER
• Para empezar la
reproducción del disco.
• Para empezar la
reproducción del disco.
REPEAT
• Para reproducir
repetidamente un capítulo o
título.
• Para reproducir repetidamente
una canción o disco.(CD)
• Para reproducir repetidamente una
canción, grupo o disco. (MP3/WMA)
RETURN
• Para volver a la operación
anterior en el menú.
• Para volver a la operación
anterior en el menú.
PLAY
• Para buscar un capítulo, título • Para buscar una canción.
o tiempo.
• Para buscar el tiempo.(CD)
• Para colocar o buscar los
• Para colocar o buscar los
marcadores.
marcadores. (CD)
SEARCH
MODE
ENTER
SETUP
4
• Para seleccionar
directamente el capítulo o
título.
• Para seleccionar ESTÉREO
L-ch o R-ch.(CD)
DISPLAY
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
WMA
• Para seleccionar idiomas de
audio en un disco.
ENTER
o
MP3
AUDIO
CLEAR
Seleccione el idioma deseado para las
indicaciones en la pantalla.
CD
• Para seleccionar los ángulos
de cámara en un disco.
OK
3
DVD-V
ANGLE
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
4
• Para repetir entre su punto A • Para repetir entre su punto A y B
y B seleccionado.
seleccionado.(CD)
SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
Para parar
la reproducción
Control remoto
STOP
2
4
PLAY
PLAY
STOP
5
Para empezar
la reproducción
SLOW
REV
STANDBY-ON
Confirme que ha seleccionado
“PLAYER MENU”.
Ponga un
disco con
la
etiqueta
hacia
arriba.
STOP
3
Para cambiar el idioma
en la pantalla
QUICK SETUP
2
SKIP
(Orden alfabético)
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
WMA
OPEN/CLOSE
STANDBY-ON
3
ANGLE
REPEAT
Botón
Confirme que ha seleccionado “QUICK”.
1
MP3
SUBTITLE
ENTER
3
CD
1
AUDIO
0
2
DVD-V
• Para llamar el menú de
ajustes de DVD.
• Para llamar el menú de
ajustes de DVD.
• Para saltar capítulos.
• Para saltar canciones.
• Para encender o apagar la
unidad.
• Para encender o apagar la
unidad.
• Para parar la reproducción.
SKIP
Para salir del menú.
SETUP
STANDBY-ON
STOP
• Para parar la reproducción.
SUBTITLE
• Para seleccionar subtítulos
en un disco.
TOP MENU
• Para llamar el menú inicial
en un disco.
ZOOM
• Para volver al archivo superior de la
jerarquía más alta en el programa
y en la lista de archivo. (MP3/WMA)
• Para ampliar parte de la
imagen. (x2/x4)
– 23 –
EN
Español
1
E61J2UD_ENSP(NEW).qx33 05.8.1 6:28 PM Page 24
Quick Use Guide
4
Connections
If your TV has AUDIO/VIDEO
input jacks, see the section
“Connection to a TV” on page
6 of the Owner’s Manual. If not,
see the section “Before using
your Unit” on the front page of
the Owner’s Manual.
Playback
Before:
¡Turn on the TV, amplifier and any other equipment which are connected to this unit. Make
sure the TV and audio receiver (commercially
available) are set to the correct channel.
STANDBY-ON
1
OPEN/CLOSE
DISPLAY
SEARCH
MODE
1
2
3
4
5
6
7
8
9
0
+10
CLEAR
A-B
Installing the Batteries
for the Remote Control
3
Disc
1
2
4
5
7
8
9
0
+10
6
ENTER
REV
FWD
A-B
SETUP
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
DISPLAY
• To repeat between your
chosen point A and B.(CD)
• To arrange the playing
• To set black level on/off.
order or play randomly.
• To set virtual surround on/off.
• To set virtual surround on/off.
OPEN/CLOSE
• To open or close the disc
tray.
• To open or close the disc
tray.
• To pause disc playback.
• To advance playback
one frame at a time.
• To pause disc playback.
• To begin disc playback.
• To begin disc playback.
REPEAT
• To play a chapter or title
repeatedly.
• To play a track or disc
repeatedly.(CD)
• To play a track, group or disc
repeatedly. (MP3/WMA)
RETURN
• To return to the previous
operation in menu.
• To return to the previous
operation in menu.
ENTER
SETUP
To exit the menu.
• To search forward/backward
through a disc.
MODE
SEARCH
MODE
4
• To search forward/backward
through a disc.
• To begin slow forward
/reverse playback during
the pause mode.
• To repeat between your
chosen point A and B.
• To call up the file list.
(MP3/WMA)
PLAY
or
• To move the cursor and
determine its position.
• To call up the Menu
on a disc.
PAUSE
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
• To move the cursor and
determine its position.
MENU
ENTER
3
• To select track directly.
• To display the current disc
or HDMI mode.
OK
Select the desired language for the OnScreen Display.
• To select chapter or title
directly.
• To display the current disc
or HDMI mode.
QUICK SETUP
ENGLISH
4:3 LETTER BOX
OFF
BITSTREAM
WMA
• To select audio languages on • To select STEREO,
a disc.
L-ch or R-ch.(CD)
• To clear the markers.(CD)
• To clear the markers.
• To remove status number
• To clear the numbers
in program input.
• To clear the numbers
entered incorrectly.
entered incorrectly.
• To cancel the point for A-B
• To cancel the point for A-B
repeat.
repeat.(CD)
CLEAR
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
MP3
AUDIO
OK
Confirm that “PLAYER MENU”
is selected.
CD
• To select camera angles on
a disc.
ENTER
2
DVD-V
ANGLE
QUICK SETUP
PLAYER MENU
TV ASPECT
PROGRESSIVE
DOLBY DIGITAL
4
3
STANDBY-ON
STOP
STOP
Remote Control
To Change the OnScreen Language
Confirm that “QUICK” is
selected.
To stop
playback
PLAY
FWD
(Alphabetical order)
1
4
PLAY
Button
3
To start
playback
SLOW
REV
STOP
5
3
Insert a
disc with
label
facing up.
OPEN/CLOSE
SKIP
PAUSE
WMA
2
3
ANGLE
2
1
MP3
1
AUDIO
REPEAT
1
CD
STANDBY-ON
SUBTITLE
2
DVD-V
• To search track.
• To search chapter, title or time.
• To search time. (CD)
• To set or search the
• To set or search the
markers.
markers. (CD)
• To call up the DVD setup
menu.
• Only used to call up the
DVD setup menu.
• To skip chapters.
• To skip tracks.
• To turn the unit on or off.
• To turn the unit on or off.
• To stop playback.
• To stop playback.
SKIP
SETUP
STANDBY-ON
STOP
SUBTITLE
• To select subtitles on a disc.
TOP MENU
ZOOM
Printed in China
• To return to the top file of the
highest hierarchy in the program
and file list. (MP3/WMA)
• To call up the Top Menu
on a disc.
• To magnify part of a picture.
(x2/x4)
1VMN21386 / E61J2UD ★★★★★
✄
1