Owner`s manual | FUNAI MWC13D6 TV DVD Combo User Manual

T8202UC(EN).QX3
06.2.13
1:42 PM
Page 1
13 inch COLOR TV/DVD
Owner's Manual
MWC13D6
FEATURES
• Auto Channel Programming
• Screen Saver
• Auto Power Off
• Parental Lock
• Resume Play
• Closed Caption Decoder
SUPPLIED ACCESSORIES
This unit comes with the following accessories. Please confirm that
all the accessories are included.
Owner's Manual
P
P
Remote Control
(NF102UD)
Owner's Manual
(1EMN21370)
*Batteries for remote control not included.
Two “AA” batteries required.
INSTRUCCIONES EN ESPAÑOL INCLUDAS
PLEASE READ BEFORE USING THIS EQUIPMENT
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING
AFTER READING OWNER'S MANUAL,
PLEASE CALL TOLL FREE 1-800-605-8610 OR VISIT OUR WEB SITE AT
http://www.funai-corp.com
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 2
PRECAUTIONS
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE CONSTITUTING
A RISK OF ELECTRIC SHOCK IS
PRESENT WITHIN THIS UNIT.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.
The caution marking is located on the rear of the cabinet.
IMPORTANT SAFEGUARDS
1. Read instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug the unit from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter,
is not intended to be unplugged by the user for cleaning or
any other purpose, may exclude the reference to unplugging
the appliance in the cleaning description otherwise required
in item 5.
6. Attachments - Do not use attachments not recommended
by the unit manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this unit near water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and
the like.
8. Accessories - Do not place this unit on an
unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury to
someone, and serious damage to the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold with the unit. Any mounting of the appliance
should follow the manufacturer’s instructions and should use
a mounting accessory recommended by the manufacturer.
An appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces may
cause the appliance and cart combination
to overturn.
Ameubles - Cet appareil ne doit être placé
que sur un meuble (avec ou sans roulettes)
recommandé par le fabricant. Si vous l’installez sur un meuble à roulettes, déplacez
les deux ensembles avec précaution. Un
arrêt brusque, l’utilisation d’une force excessive et des surfaces irrégulières risquent de déstabiliser l’ensemble et de le
renverser.
9. Ventilation - Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating, and
10.
11.
12.
PORTABLE CART WARNING
S3126A
SYMBOLE D'AVERTISSEMENT POUR
LES COMPOSANTES
APPAREIL ET MEUBLE A ROULETTES
13.
these openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should never be
placed near or over a radiator or heat register. This unit
should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
Power Sources - This unit should be operated only from the
type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For the
units intended to operate from battery power, or other
sources, refer to the operating instructions.
Grounding or Polarization - This unit is equipped with a
polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
Outdoor Antenna grounding - If an outside antenna or
cable system is connected to the unit, be sure the antenna
or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA No.
70, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode. (Fig. A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
S3126A
2
EN
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
NEC - NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
06.2.13
1:42 PM
Page 3
14. Lightning - For added protection for this unit receiver during
a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the unit due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this unit through openings as they may touch dangerous
voltage points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the unit.
18. Servicing - Do not attempt to service this unit yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service - Unplug this unit from the wall
outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions, as improper adjustment of
other controls may result in damage and will often require
extensive work by a qualified technician to restore the unit to
its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performance, this
indicates a need for service.
20. Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other hazards.
21. Safety Check - Upon completion of any service or repairs to
this unit, ask the service technician to perform routine safety
checks to determine that the unit is in proper operating condition.
22. Heat - This unit product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
PRECAUTIONS / IMPORTANT SAFEGUARDS
T8202UC(EN).QX3
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless the modifications are expressly approved in the
owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or
modification is made.
3
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 4
LASER SAFETY
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service
this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK MECHANISM.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU'AU FOND.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system
of the building as close to the point of cable entry as practical.
LOCATION
For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place
for its installation:
• Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the
top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
• Install unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the unit near strong magnetic fields.
• Avoid moving unit to locations where temperature differences are extreme.
• Be sure to remove disc and unplug the AC power cord from the outlet before carrying the unit.
TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the unit disc loading tray.
• Do not place anything directly on top of the unit.
MOISTURE WARNING
• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or
after heating a cold room or under conditions of high humidity. If you play a videotape or DVD in a moist
unit, it may damage the tape or DVD and the unit. When the condensation occurs inside the unit, turn the
unit on and leave it at least 2 hours to dry out.
NOTE ABOUT RECYCLING
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
The serial number of this product may be found on the back of the unit. No other unit has the same serial
number as yours. You should record the number and other vital information here and retain this book as a
permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
4
EN
Dealer Phone No.
Model No.
Serial No.
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 5
TABLE OF CONTENTS
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . .2
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . .5
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . .15
SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . .5
SPECIAL PLAYBACK FUNCTIONS & SETTINGS . . .16
ANTENNA/CABLE CONNECTIONS . . . . . . . . . . . .6
CONNECTING TO AN EXTERNAL DEVICE (FRONT) . .7
INSTALLING THE BATTERIES IN REMOTE CONTROL .7
OPERATING CONTROLS AND FUNCTIONS . . .8
TV SECTION
TV OPERATION AND SETTINGS . . . . . . . . . . . .9
INITIAL SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . .9
WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . .9
SLEEP TIMER / PICTURE CONTROL . . . . . . . . . .10
CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . .10
CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . .11
ON-SCREEN MENU LANGUAGE . . . . . . . . . . . . .11
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .12
DVD SECTION
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . .14
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . .14
UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . .14
FUNCTION TABLE . . . . . . .
AUDIO MENU . . . . . . . . . . .
SUBTITLE LANGUAGE . . . .
ANGLE MENU . . . . . . . . . . .
ZOOM . . . . . . . . . . . . . . . . .
BLACK LEVEL MENU . . . . .
SEARCH MENU . . . . . . . . .
REPEAT PLAYBACK . . . . . .
PROGRAMMED PLAYBACK
RANDOM PLAYBACK . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.16
.17
.17
.17
.17
.18
.18
.19
.20
.20
ON-SCREEN INFORMATION . . . . . . . . . . . . . .20
CHANGING THE DVD SET UP ITEMS . . . . . . .21
CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . .21
INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . .24
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . .26
APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
CABLE CHANNEL DESIGNATIONS . . . . . . . . . . .27
LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . .27
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .28
ESPAÑOL
. . . . . . . . . . . . . . . . . . . . . . .29
WARRANTY . . . . . . . . . . . . . . . . . .BACK COVER
IMPORTANT SAFEGUARDS / TABLE OF CONTENTS
PREPARATION FOR USE . . . . . . . . . . . . . . . . . .6
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .15
DISC MENU / TITLE MENU . . . . . . . . . . . . . . . . . .15
SYMBOLS USED IN THIS MANUAL
The following symbols below appear in some headings and notes in this manual, with the following meanings.
TV
Description refers to TV operation
(in the TV mode).
Description refers to playback of
DVD video discs (in the DVD mode).
Description refers to playback of
audio CDs (in the DVD mode).
QUICK Description refers to the items
to be set by the QUICK mode
(in the DVD mode).
5
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 6
PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
Plug the incoming cable into the ANT. jack on the rear of the unit.
If your cable service supplies you with a converter box or if you use a satellite system, connect the box with
this unit as shown below.
Cable
TV signal
or
Antenna
Incoming cable from home
Antenna / Cable Company
(No Cable Box)
ANT.
ANT.
OR
Cable Box or Satellite Box*
IN
OUT
Incoming cable from Cable Company
or Satellite Antenna
NOTE:
Before plugging the antenna into
the ANT. jack of the unit, check
that the pin is not bent. If it is bent,
straighten the pin as illustrated,
then plug the pin into the ANT. jack
of the unit.
6
EN
Rear of the unit
*NOTE
(DO NOT DISCONNECT FROM BOX)
Some cable TV systems use scrambled
signals and require a special converter to
receive these channels. Consult your local
cable company.
Bent pin
Cable
Plug
(Needs to be
straightened)
(Straight pin)
For your safety and to
avoid damages to the unit,
unplug the antenna cable
from the ANT. jack before
moving the unit.
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 7
CONNECTING TO AN EXTERNAL DEVICE (FRONT)
When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.
Connect the Audio/Video output jacks of another source to the AUDIO and VIDEO jacks of
this unit.
Then use [SELECT] or [CH. K / L] until "AUX" appears on the screen.
STANDBY-ON
AUX
VIDEO
VOLUME
CH.
STOP
SELECT
AUDIO
PLAY
ex.
VCR or video camera, etc.
[Front of the unit]
To the Audio output jack
(OUT)
Audio Cable
(commercially available)
(IN)
OPEN/CLOSE
VIDEO
To the Video output jack
(OUT)
AUDIO
PREPARATION FOR USE
OPEN/CLOSE
(IN)
Video Cable
(commercially available)
INSTALLING THE BATTERIES IN REMOTE CONTROL
1) Open the battery compartment cover by pressing
the cover on the remote unit in the direction of
the arrow.
2) Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3) Replace the cover.
1
2
3
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
• If the device is not to be used for a long period
of time, remove the batteries to prevent damage
or injury from possible battery leakage.
• Do not try to recharge batteries not intended to
be recharged; they can overheat and rupture.
7
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 8
OPERATING CONTROLS AND FUNCTIONS
- FRONT PANEL -
STANDBY-ON
OPEN/CLOSE
VIDEO
1
2
VOLUME
CH.
STOP
SELECT
PLAY
3
4 5
6
7
8
AUDIO
9 10
- REMOTE CONTROL -
STANDBY-ON
OPEN/
CLOSE
PICTURE/
SLEEP
SELECT
1
2
3
4
5
6
7
8
22
23
11
12
13
PREV
+100
0
+10
NEXT
SET-UP
15
16
25
MUTE
PLAY
FWD
STOP
SLOW
PAUSE
CLEAR
MODE
21
VOL.
26
27
28
REW
17
18
19
20
24
9
DISPLAY
14
CH.
DISC MENU
TITLE
ENTER
29
30
31
32
RETURN
33
[FRONT PANEL]
01 y STANDBY-ON Button [TV P.9 / DVD P.15]
02 Disc loading tray
03 VOLUME X / Y Buttons [P.9]
04 CHANNEL SELECT K Button [TV P.9]
05 STOP C Button [DVD P.15]
06 PLAY B Button [TV P.9 / DVD P.15]
07 Remote sensor window
08 OPEN/CLOSE A Button [DVD P.15]
09 VIDEO input Jack [P.7]
10 AUDIO input Jack [P.7]
8
EN
[REMOTE CONTROL]
11 STANDBY-ON y Button [TV P.9 / DVD P.15]
12 PICTURE/SLEEP Button [TV P.10]
13 Number Buttons [TV P.9 / DVD P.18]
14 DISPLAY Button [DVD P.20]
15 PREV H Buttons [DVD P.18]
16 NEXT G Buttons [DVD P.18]
17 PLAY B Button [TV P.9 / DVD P.15]
18 PAUSE F Button [DVD P.15]
19 TITLE Button [DVD P.15]
20 CLEAR Button [TV P.10 / DVD P.18]
21 MODE Button [DVD P.16]
22 OPEN/CLOSE A Button [DVD P.15]
23 SELECT Button [TV P.9]
24 CH. K / L Buttons [TV P.9]
25 VOL. X / Y Buttons [TV P.9]
26 MUTE Button [TV P.9]
27 SET-UP Button [TV P.10 / DVD P.21]
28 REW E Button [DVD P.15]
29
30
31
32
33
FWD D Button [DVD P.15]
STOP C Button [DVD P.15]
DISC MENU Button [DVD P.15]
ENTER Button [TV P.10 / DVD P.15]
K / L /{ / B Buttons [TV P.10 / DVD P.15]
RETURN Button [DVD P.17]
NOTES:
• We do not recommend the use of universal remote controls as it may not control all the functions. Note that the
code number given by universal remote controls may
not program to this unit. For more details, contact the
manufacturer of the universal remote control.
• Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 9
TV OPERATION AND SETTINGS
WATCHING A TV PROGRAM
TV
When you turn on the power for the first time,
the INITIAL LANGUAGE screen is displayed.
Select the language for screen display and perform
auto programming of the channels.
1
2
3
Confirm the antenna (or cable)
connection and press [PLAY B].
• The tuner scans and
memorizes all active
channels in your area.
5
If the TV screen shows snow
noise and there is no operation
for more than 10 seconds,
“HELPFUL HINTS” appears.
When the scanning is completed,
the tuner stops on the lowest
memorized channel.
TV
- HELPFUL HINTS 1.PLEASE CHECK TO SEE IF
THE ANTENNA/CABLE/
SATELLITE IS
PROPERLY CONNECTED.
2.DID YOU PERFORM
“AUTO CH PROGRAMMING”?
3.PLEASE REFER TO FRONT
PAGE OF THE OWNER’S
MANUAL OR REAR PANEL
FOR SUPPORT LINE
INFORMATION.
• Make sure if the antenna or cable is connected
properly. (Refer to “ANTENNA/CABLE CONNECTIONS on page 6.)
• Set the“AUTO CH PROGRAMMING” in the
CHANNEL SET UP. (Refer to “CHANNEL SET UP”
on page 11.)
• If those setting do not work properly, please
call our help line on the front page of this owner’s
manual.
Press [STANDBY-ON y] to turn on the unit.
Press one of the keys listed
below to select the language
of on-screen menu.
Press [STANDBY-ONy] to turn on the unit.
NOTES:
After antenna or cable connection is
completed, connect the power cord into
a standard AC outlet.
• ENGLISH: [VOL. Y]
• ESPAÑOL: [VOL. X]
• FRANÇAIS: [CH. K]
4
1
SELECT LANGUAGE
ENGLISH
NEXT:PRESS VOLYH
ESPAÑOL
DESPUÉS:PRESIONE VOLXH
FRANÇAIS
APRÈS:PRESSEZ CH.KH
2
Use [CH. K / L] or the Number buttons to
select your desired channel number.
To use the number buttons
– INITIAL SETUP –
PLEASE CONNECT ANTENNA
OR CABLE OR SATELLITE
TO THIS UNIT.
THEN PRESS PLAY,
IN ORDER TO PERFORM
“AUTO CH PROGRAMMING”
•Single digit channels: (Ex. 02, 03, 04 and so on)
Press [0] first to select a single digit channel.
•Two digit channels: (Ex. 12, 38, 95 ...)
Press two digits directly.
•Tree digit channels: (Ex. 115, 125 ...)
Press [+100] first, then press the last two digits.
TV OPERATION AND SETTINGS
INITIAL SET UP
TV SECTION
TV SECTION
CH 15
(Example)
NOTES:
• You can exit the INITIAL SETUP menu by pressing
[SET-UP]. If the button is pressed during channel
scanning, the tuner stops scanning and the lowest
memorized channel is displayed.
• The INITIAL SETUP menu is displayed every time
you turn on the unit unless the scanning is completed.
• In case no channel can be
received by the channel scanning,
NO TV SIGNALS
"NO TV SIGNALS" is displayed on
the screen. Turn off the unit and
check the antenna connection,
then follow steps 1 to 5 again.
• You can change the setting after completing INITIAL SETUP by LANGUAGE menu or CHANNEL
SET UP menu. (Refer to "ON-SCREEN MENU LANGUAGE" or "CHANNEL SET UP" on page 11).
3
Use [VOL. X / Y] to adjust the volume.
Press [MUTE] to instantly
mute the sound. Press it again
to restore the previous sound
level.
VOLUME
20
C C C C CC C C C C C C C C C C
NOTE:
• Even if you turn off the unit in the DVD mode, the unit
will be in the TV mode when you turn it on again.
TO WATCH CABLE OR SATELLITE CHANNEL
If the unit is connected to a cable box or satellite
box, use [CH. K / L] to select CH3 or CH4 according to the output channel setting of the device and
select desired channel on that device.
TO WATCH EXTERNAL INPUT
When an external equipment is
connected to the front AUDIO/
VIDEO input jacks, press
[SELECT] or [CH. K / L] repeatedly until "AUX" appears on the
screen.
AUX
9
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 10
TV SECTION
TV OPERATION AND SETTINGS
SLEEP TIMER / PICTURE CONTROL
TV
You can set Sleep Timer and picture
adjustment with [PICTURE / SLEEP].
• The menu changes as described below every time
you press [PICTURE / SLEEP].
BRIGHT
Sleep Timer
SHARPNESS
1
K / L] to point to
Use [K
"CAPTION".
2
Press [PICTURE / SLEEP] to
display the Sleep Timer menu.
SLEEP 0 MINUTE
CCCCCCCCCCCC
• [s]...Decrease by 10 min.
• TEXT mode: You can watch half screen text informa*"CAPTION2" is usually used for a second language (if
available).
3
• Even if any power failure, the unit will retain its memory for this feature.
• Some programs are not broadcasted with closed
captions. The unit is designed to provide error-free
closed captions with high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
• Common signal conditions which may cause caption
errors are listed below:
- Weak snowy reception on TV screen
- Multiplex signal reception displaying picture
ghosts or airplane flutter
• If the unit displays a black box on
the TV screen, this means that
the unit is set to the TEXT mode.
To clear screen, select "CAPTION1", "CAPTION2" or "OFF".
PICTURE CONTROL
The picture controls are preset to factory defaults,
but you can change them to your desired setting.
Press [PICTURE / SLEEP]
repeatedly until desired control
is displayed.
BRIGHT
–PPPPPPPCPPPPPPP+
Use [s / B] to adjust to your desired level within
5 seconds.
to decrease brightness
to decrease contrast
to pale
to purple
to soft
to increase brightness
to increase contrast
to brilliant
to green
to clear
• Even if any power failure occurs, the unit will
retain its memory for this feature.
10
EN
Press [SET-UP] to exit the menu.
NOTES:
To confirm the remainder time to shutdown,
press [PICTURE / SLEEP].
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
- TV SETUP CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [CAPTION1]
news while captioning the dialogues and the contents
of news.
• To cancel the Sleep Timer, use [CLEAR] or [s / B]
to set the time to "0".
2
Press [ENTER] repeatedly to
select your desired caption
mode.
• CAPTION mode: You can watch dramas, movies and
NOTE:
1
- TV SETUP CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [OFF]
tion if you want.
Within 10 seconds, set your desired sleep time
using [s / B].
• [B]...Increase by 10 min. (Up to 120 min.)
3
Press [SET-UP].
COLOR
TINT
The Sleep Timer function is used to turn off the
unit without pressing [STANDBY-ON y] after a
desired time.
2
TV
You can view specially labeled (cc) TV programs, movies, news and pre-recorded tapes with
either a dialogue caption or text display.
CONTRAST
SLEEP TIMER SETTING
1
CLOSED CAPTION SYSTEM
TO CANCEL THE CLOSED CAPTION SYSTEM
1
K / L] to point to
Press [SET-UP]. Use [K
"CAPTION".
2
Press [ENTER] repeatedly to select "OFF".
3
Press [SET-UP] to exit the menu.
1:42 PM
Page 11
CHANNEL SET UP
Channel presetting is necessary at the start
or in case you moved the TV to a different area.
TV
• Refer to page 9 on how to use
the Number buttons.
4
AUTO CHANNEL PROGRAMMING
1
Press [SET-UP].
- TV SETUP -
K / L] to point to
Use [K
"CHANNEL SET UP", then
press [ENTER].
2
K / L] to point to "AUTO
Use [K
CH PROGRAMMING", then
press [ENTER].
B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
• To delete or add another channel, repeat steps 3
to 4.
5
– CHANNEL SET UP –
Press [ENTER] repeatedly. The channel number
changes to red (deleted) or blue (added) every
time you press the button.
Press [SET-UP] to exit the menu.
NOTE:
• To confirm that channel(s) has (have) been deleted
or added, select it (them) using [CH. K / L].
ADD/DELETE CH (CATV)
B AUTO CH PROGRAMMING
The tuner scans and memorizes all the active
channels in your area.
3
ON-SCREEN MENU LANGUAGE
When the scanning is completed, the lowest memorized
channel is displayed.
CH 15
(Example)
You can select the language of on-screen
menu among English, Spanish and French.
1
If "NO TV SIGNALS" appears
on the TV screen, check the
antenna connection and try
again.
NO TV SIGNALS
Press [SET-UP].
K / L] to point to
Use [K
"LANGUAGE".
TV
- TV SETUP CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
NOTES:
• The unit may recognize CATV channels to be TV
channels if reception condition is poor. In this case,
check the antenna connection and try "AUTO CH
PROGRAMMING" again.
• Auto channel programming is NOT necessary
when connected to a cable box or satellite box.
Just select the channel for cable box or satellite
input (ex. CH3 or CH4) on the unit, then select
your desired channel on the cable box or satellite
box.
ADDING/DELETING CHANNELS
TV SECTION
06.2.13
2
Press [ENTER] repeatedly to select "ENGLISH",
"ESPAÑOL" or "FRANÇAIS".
3
Press [SET-UP] to exit the menu.
TV OPERATION AND SETTINGS
T8202UC(EN).QX3
NOTES:
• This function effects only the language on the screen
menu and not the audio source.
• If for some reason the menu is already in Spanish or
K / L] point to
French, press [SET-UP], using [K
"IDIOMA [ESPAÑOL]" or "LANGAGE [FRANÇAIS]",
then press [ENTER] repeatedly to select desired language, then press [SET-UP].
You can add channels that was not memorized due
to the bad reception status and also delete channels you no longer receive or seldom watch.
1
2
3
Press [SET-UP].
K / L] to point to
Use [K
"CHANNEL SET UP", then
press [ENTER].
K / L] to point to
Use [K
"ADD/DELETE CH", then
press [ENTER].
Use the Number buttons or
[CH. K / L] to select your
desired channel number.
K / L] to
(You can also use [K
enter it.)
- TV SETUP B CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
– CHANNEL SET UP –
B ADD/DELETE CH (CATV)
AUTO CH PROGRAMMING
08
ADD / DELETE
(Example: CH8)
11
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 12
TV SECTION
TV OPERATION AND SETTINGS
A
V-CHIP SET UP
TV
This feature enables parents to prevent their
children from watching inappropriate material on
TV. When you try to access a blocked program,
“PROTECTED PROGRAM by ...” message appears
on the TV screen.
4
1
2
Press [SET-UP].
Use [K / L] to select
"V-CHIP SET UP", then press
[ENTER].
Selection
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
PROTECTED PROGRAM
by TV-Y
3
Use [K / L] to select an item,
then press [ENTER].
Refer to the pages below to
set up each item.
• TV RATING :
• MPAA RATING :
• CHANGE CODE:
_ _ _ _
5
– V-CHIP SET UP –
B TV RATING
MPAA RATING
CHANGE CODE
P12 A
P13 B
P13 C
)
)
)
)
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
Rating Category Explanations
Appropriate for all children
Appropriate for children seven and older
General Audience
Parental Guidance suggested
Unsuitable for children under 14
Mature audience only
• When you select a rating and set
it to "BLOCK", the higher ratings
TV–Y
[VIEW]
TV–Y7 (
)
[VIEW]
B TV–G
[BLOCK]
will be blocked automatically.
TV–PG (DLSV )
[BLOCK]
TV–14 (DLSV )
[BLOCK]
The lower ratings will be availTV–MA ( LSV )
[BLOCK]
able for viewing.
• When you set the lowest rating to
"VIEW", all other ratings will be automatically available for viewing.
ACCESS CODE
• For the first time set-up or in
the event the unit has lost
power, enter the default code of 0000.
B TV–Y
TV–Y7 (
TV–G
TV–PG (
TV–14 (
TV–MA (
NOTES:
- TV SETUP CHANNEL SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
Use the Number buttons to
enter the access code.
Use [K / L] to select a rating
that you wish to block.
Press [ENTER] repeatedly to
set it to "BLOCK" or "VIEW".
NOTE:
• To change the rating, the TV
must be turned to an unprotected program. If the screen on the
right is displayed, change the
channel to a station that is not
protected.
TV RATING SET UP
6
The TV-Y7, TV-PG, TV-14 and
TV-MA ratings have the option
of sub rating categories.
Use [K / L] to select a rating
with sub-ratings, then press
[ENTER] twice.
K / L] to select a subUse [K
rating, then press [ENTER] to
set it to "BLOCK" or "VIEW".
TV–Y
B TV–Y7 (
TV–G
TV–PG (
TV–14 (
TV–MA (
TV–PG
)
)
)
)
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
B D
L
S
V
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
TV–Y
TV–Y7 (
)
TV–G
B TV–PG (DLSV )
TV–14 (DLSV )
TV–MA ( LSV )
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
NOTE:
• The blocked sub-ratings will
appear next to the rating category in the "TV RATING" menu.
Selection Rating Category Explanations
TV-Y7
FV
Fantasy Violence
TV-PG, TV-14, TV-MA
Suggestive Dialog (TV-PG, TV-14 only)
D
L
Coarse Language
S
Sexual Situation
V
Violence
7
12
EN
Press [SET-UP] to exit the menu.
T8202UC(EN).QX3
MPAA RATING SET UP
Use [K / L] to point to your
desired item, then press
[ENTER] to select "BLOCK"
or "VIEW".
Selection
G
PG
PG-13
R
NC-17
X
5
5
G
PG
PG–13
B R
NC–17
X
[VIEW]
[VIEW]
[VIEW]
[BLOCK]
[BLOCK]
[BLOCK]
Rating Category Explanations
General Audience
Parental Guidance suggested.
Unsuitable for children under 13
Restricted; under 17 requires accompanying parent or adult guardian
No one under 17 admitted
Mature audience only
Press [SET-UP] to exit the menu.
C
4
Page 13
CHANGE ACCESS CODE
Use the Number buttons to
enter your desired access
code in the "NEW CODE",
then enter the same code in
the "CONFIRM CODE". When
completed, the menu will
return to "V-CHIP SET UP".
NEW CODE
XXXX
CONFIRM CODE
_ _ _ _
TV SECTION
4
1:42 PM
TV OPERATION AND SETTINGS
B
06.2.13
Press [SET-UP] to exit the menu.
NOTE:
• Your personal access code will be erased and will
return to the default (0000) when a power failure
occurs or when you turn off the power using a wall
switch. If you forget the code, unplug the power cord
for 10 seconds to restore the access code to 0000.
13
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 14
DVD SECTION
ABOUT THE DISCS
PLAYABLE DISCS
Playable
discs
Mark (logo)
DVD-Video
Region
code
Recorded Disc
signals size
Disc types
or
*1,2,4,6,10,11
DVD-RW
DVD-R
-
*1,3,4,5,6,
7,9,10
DVD+RW
DVD+R
Digital 12 cm
video
or
(MPEG2) 8 cm
Example
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
-
*1,3,4,5,6,8,9,10
Audio CD
* 4,6,10
CD-RW
CD-R
-
Digital
audio
12 cm
or
8 cm
Example
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
* 4,5,6,9,10
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may
not play them back. Even if they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD
recorder. However, depending on the recording status of a disc, the disc may not be played back at all
or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc
with the DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not
be played back at all or normally (the picture or sound may not be smooth, etc.).
*9: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may
not play back properly.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read
it correctly.
*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region
format can only be played back on unit with the same region code.
UNPLAYABLE DISCS
• NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / CD-i / Photo CD / Video CD / DVD-Audio / DVD with region codes other than 1 or ALL /
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3
• The sound MAY NOT be heard: Super Audio CD
NOTE:
Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio
CD layer cannot be delivered.
• Any other discs without compatibility indications
14
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 15
PLAYING A DISC
FAST FORWARD / FAST REVERSE
BASIC PLAYBACK
1 Press [STANDBY-ONy] to turn
2
Press [OPEN/CLOSE A].
3
Place the disc in the tray, with
the label facing up.
• Every time you press the button,
playback speeds up and the level
of the speed appears on the
screen.
D1
NOTES:
4
• For DVDs, fast forward/reverse speed is different
depending on the disc. Approximate speed is 1 (×2),
2 (×8), 3 (×20), 4 (×50) and 5 (×100).
Press [PLAY B].
• The tray will close automatically and playback will
start. When you play back a DVD which features a
title menu, it may appear on the screen.
• For Audio CDs approximate speed is 1 (×2), 2 (×8)
and 3 (×30).
• To return to normal playback, press [PLAY B].
NOTES:
• Closing the disc tray manually or by pressing
[OPEN/CLOSE A] also starts playback.
• With DVDs that use titles for playback program signals,
playback may start from the second title or it may skip
these titles.
5
To freeze the picture, press [PAUSE F] during
playback.
NOTE:
SLOW FORWARD / SLOW REVERSE
• During playback, press [PAUSE F].
• Press [FWD D] for slow forward or
[REW E] for slow reverse.
• Every time you press the button,
playback is slowed down and the
level of the speed appears on the
screen.
• The sound will be muted in pause mode.
6
Press [STOP C] to stop
playback temporarily.
• Press [PLAY B] to resume
the playback.
• To cancel resume and stop the
disc, [STOP C] again.
1
NOTE:
• Slow forward / reverse speed varies with the disc.
Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).
Resume ON
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
NOTES:
• The resume information stays on even if the unit is
turned off.
• A "prohibited icon" may appear
at the top-right on the TV screen
during operation. This means
that the operation is not available on the disc.
STEP BY STEP PLAYBACK
• During playback, press [PAUSE F].
You can advance the picture frame by
frame by pressing [PAUSE F] repeatedly.
• To return to normal playback, press [PLAY B].
• To return to normal playback, press [PLAY B].
ABOUT THE DISCS / PLAYING A DISC
on the unit.
DVD SECTION
• During playback, press
[FWD D] for fast forward or
[REW E] for fast reverse.
DISC MENU / TITLE MENU
DVD may contain menus to navigate the
disc and access special features.
1
Press [DISC MENU] or [TITLE].
• The DVD main menu / the title menu will appear.
• You can call up the menu even during playback.
2
Use [K / L / s / B] to select an item, and press
[ENTER].
NOTES:
• If disc menu is available on the disc, audio language,
subtitle options, chapters for the title and other
options will appear for selection.
• Contents of menu and corresponding menu operations may vary between discs. Refer to the manual
accompanying the disc for details.
15
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 16
DVD SECTION
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
FUNCTION TABLE
Setting menu switches as below every time you press [MODE] during playback.
See the reference page for how to set each menu. Some functions are not available in specific
modes, but this is not a malfunction.
DVD-V
CD
Press [MODE]
Press [MODE]
AUDIO MENU (P.17)
SUBTITLE MENU (P.17)
ANGLE 1
....
ANGLE 8
ZOOM MENU (P.17)
OFF
ZOOM 1 (×1.3)
ZOOM 2 (×2.0)
ZOOM 3 (×4.0)
OFF
ON
SEARCH MENU (P.18)
CHAPTER SEARCH
TITLE SEARCH
TIME SEARCH
MARKER SEARCH
REPEAT MENU (P.19)
OFF
CHAPTER
TITLE
A-B REPEAT MENU (P.19)
MENU OFF
EN
OFF
SUBTITLE STREAM 1
....
SUBTITLE STREAM 32
ANGLE MENU (P.17)
(If available)
BLACK LEVEL MENU (P.18)
16
AUDIO STREAM 1
...
AUDIO STREAM 8
OFF
AA-B
AUDIO MENU (P.17)
STEREO
L-ch
R-ch
SEARCH MENU (P.18)
TRACK SEARCH
TIME SEARCH
MARKER SEARCH
REPEAT MENU (P.19)
OFF
TRACK
ALL
A-B REPEAT MENU (P.19)
MENU OFF
OFF
AA-B
1:42 PM
Page 17
AUDIO MENU
ANGLE MENU
AUDIO LANGUAGE
Some DVD discs contain scenes which
have been shot from various angles and
you can change them as you like.
You can select audio language during DVD playback
(if multi languages are available).
1
Press [MODE] during playback.
2
Use [K / L] to select your desired language.
1
During playback, press
[MODE] repeatedly until
ANGLE menu appears.
2
Use [K / L] to select your desired angle.
3
Press [RETURN] to exit the menu.
1.ENG Dolby D 1/2 ch 48k/3
NOTES:
• This function may not work on some DVDs with multiple audio languages. In this case, set it on the disc
menu. (Operation varies depending on discs. Refer to
the manual of the disc.)
• When "NOT AVAILABLE" appears
on the TV screen, it means this
function is not available on the
disc.
1 / 8 (ANGLE)
NOTE:
• If multiple angle function is not available, this menu
does not appear on the screen.
NOT AVAILABLE (AUDIO)
3
STEREO SOUND MODE
You can select sound output mode during CD
playback.
1
2
Press [MODE] during
playback.
ZOOM
The Zoom function allows you to enlarge
the video image and to pan through the
enlarged image.
Press [RETURN] to exit the menu.
1
During playback, press
[MODE] repeatedly until
ZOOM menu appears.
2
Press [ENTER] repeatedly to select the required
zoom factor.
Use [K / L] to select the sound mode.
OFF
OFF (ZOOM)
ZOOM1 (×1.3) ZOOM2 (×2.0) ZOOM3 (×4.0)
ZOOM1
ZOOM2
ZOOM3
Press [RETURN] to exit the menu.
SUBTITLE LANGUAGE
You can select a language for subtitles
during DVD playback (if available).
1
OFF (ZOOM)
STEREO (AUDIO)
• STEREO: mixed sound of left and right channels
L-ch:
left channel sound only
R-ch:
right channel sound only
3
During playback, press
[MODE] repeatedly until
SUBTITLE menu appears.
DVD SECTION
06.2.13
3
Use [K / L / s / B] to move the zoomed picture
across the screen.
4
Press [RETURN] to exit.
• The zoomed position guide
appears on the right corner
of the TV screen in the zoom mode.
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
T8202UC(EN).QX3
1.ENG/6 (SUBTITLE)
2
Use [K / L] to select your desired subtitle language. To cancel subtitles, select "OFF".
3
Press [RETURN] to exit the menu.
NOTES:
NOTES:
• Zooming function does not work while disc menu is shown.
• Zooming function is not available on some discs.
• It may take several seconds to slide the zoomed picture.
• The picture may be distorted if you operate other
functions (ex. pause, fast forward etc.) repeatedly in
the zoom mode.
• To cancel the zoom mode, repeat steps 1-2 and
press [ENTER] until "OFF" appears.
• This function may not work on some DVDs with multiple subtitle languages. In this case, set it on the disc
menu. (Operation varies depending on discs. Refer to
the manual of the disc.)
• If the selected language does not have 3-letter code,
"---" will be displayed on the screen. (Refer to
"LANGUAGE CODE LIST" on page 27.)
17
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 18
DVD SECTION
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
BLACK LEVEL MENU
SEARCH MENU
You can adjust the Black Level to make the
black parts of the picture brighter.
You can begin playback at a specific track, title,
chapter or from a specific point on a disc.
1
TRACK SEARCH
2
During playback, press
[MODE] repeatedly until
BLACK LEVEL menu
appears.
OFF (BLACK LEVEL)
Use [K / L] to select "ON" or "OFF".
• ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
(Initial setting)
3
1
2
During playback, press [MODE]
repeatedly until SEARCH
menu appears.
__/12 (SEARCH)
Within 60 seconds, use the Number buttons to
select the desired track number. Playback will
start from the selected track.
NOTES:
Press [RETURN] to exit the menu.
• For single digit press [0] first, if the total track of the
disc is 10 tracks or more.
• You can also skip tracks by using [PREV H ]
[NEXT G], or entering the desired track number
with the Number buttons.
NOTE:
• The setting will be saved even if the unit is turned off.
3
Press [RETURN] to exit the menu.
CHAPTER SEARCH
1
2
During playback, press
[MODE] repeatedly until
SEARCH menu appears.
_ _/21 (SEARCH)
Use the Number buttons to enter the desired
chapter number. Playback will start at the selected
chapter.
• Press [CLEAR] to erase the incorrect input.
• For single digit press [0] first, if the total number of
chapters of the disc is 10 or more.
3
Press [RETURN] to exit the menu.
NOTE:
• You can also skip chapters by using [PREV H ]
[NEXT G], or entering the desired chapter number
with the Number buttons.
TITLE SEARCH
1
During playback, press [MODE] repeatedly until
SEARCH menu appears.
2
Use [K / L] to display
TITLE SEARCH menu.
3
Use the Number buttons to enter the desired title
number. Playback will start at the selected title.
_/2 (SEARCH)
• Press [CLEAR] to erase the incorrect input.
• For single digit press [0] first, if the total number of
titles of the disc is 10 or more.
4
18
EN
Press [RETURN] to exit the menu.
1:42 PM
Page 19
TIME SEARCH
REPEAT PLAYBACK
1
During playback, press [MODE] repeatedly until
SEARCH menu appears.
REPEAT TRACK
2
Use [K / L] repeatedly to
display TIME SEARCH menu.
3
Within 60 seconds, use the Number buttons to
enter a desired disc time. Playback will start at
the specified time.
0:0 _:_ _
TOTAL
1
During playback, press
[MODE] repeatedly until
REPEAT menu appears.
2
Use [K / L] to select your desired repeat mode.
0:04:23
• Press [CLEAR] to erase the incorrect input.
• OFF:
Repeat function off
TRACK: Current track repeat
ALL:
All track repeat
• When there is no need to enter a number, "0"
appears automatically.
4
Press [RETURN] to exit.
You can set markers to memorize your favorite
places on a disc.
1
During playback, press [MODE] repeatedly until
SEARCH menu appears.
2
Use [K / L] repeatedly to
display MARKER SEARCH
menu.
3
4
1 2 3 4 5 6 7 8 9 10 AC
_ _ _ _:_ _:_ _
<Example: CD>
6
• Repeat Track setting will be cleared when moving to
other track.
1
During playback, press
[MODE] repeatedly until
REPEAT menu appears.
2
Use [K / L] to select your desired repeat mode.
NOTE:
• Repeat Title/Chapter is not available in some scenes.
• The REPEAT setting will be cleared when moving to
other title or chapter.
3
You can play from the desired point by selecting
s / B] and then
the marker number by using [s
pressing [ENTER].
To clear a marker, select the marker number and
press [CLEAR]. To clear all markers at once,
s / B] and press [ENTER].
select "AC" with [s
• The following operation will also erase all markers:
– Opening the disc tray
– Turning off the power
– Pressing [SELECT]
Press [RETURN] to exit the menu.
Press [RETURN] to exit the menu.
1 00:15:30
REPEAT A-B
1
Press [MODE] repeatedly until
A-B REPEAT menu appears.
2
Press [ENTER] at your desired
starting point (A).
To cancel it, press [CLEAR].
A B OFF (A-B REPEAT)
A B A- (A-B REPEAT)
3
Press [ENTER] again at your
desired ending point (B).
The repeat sequence begins.
4
To exit the sequence, follow step 1 and press
[ENTER] repeatedly until "OFF" appears and
press [RETURN] to exit the menu.
NOTE:
7
OFF (REPEAT)
• OFF:
Repeat function off
CHAPTER: Current chapter repeat
TITLE:
Current title repeat
When the track (or title) reaches your desired
point, press [ENTER] to set a marker.
2 3 4 5 6 7 8 9 10 AC
Press [RETURN] to exit the menu.
REPEAT TITLE / CHAPTER
s / B] to select a marker number among
Use [s
1 to 10.
• The track (or title) number and
elapsed playing time will appear
on the TV screen.
5
NOTE:
3
MARKER SEARCH
OFF (REPEAT)
DVD SECTION
06.2.13
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
T8202UC(EN).QX3
A B A-B (A-B REPEAT)
NOTES:
• The A-B repeat section can be set only within the current title (for DVDs) or current track (for Audio CDs).
• A-B repeat is not available with some scenes in DVD.
• A-B repeat playback is not available during other
repeat playback.
19
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 20
DVD SECTION
SPECIAL PLAYBACK FUNCTIONS & SETTINGS
PROGRAMMED PLAYBACK
5
You can determine the playing order of tracks.
1
In the stop mode, press [MODE].
PROGRAM
• The PROGRAM screen appears.
CD-DA
1
2
3
4
5
6
7
ENTER
PLAY
CLEAR
2
Use [K / L] to select a track,
then press [ENTER].
3:40
4:30
5:00
3:10
5:10
1:30
2:30
TOTAL 0:00:00
1/4
NOTE:
1/1
• REPEAT setting is available during programmed
playback. (Refer to "REPEAT TRACK" on page 19.)
1 3:40
PROGRAM
CD-DA
1
2
3
4
5
6
7
NOTES:
ENTER
3:40
4:30
5:00
3:10
5:10
1:30
2:30
TOTAL 0:14:25
1
3
10
12
6
1/4
3:40
5:00
1:30
2:45
1:30
1/1
• Up to 99 tracks can be entered.
• Press [CLEAR] to erase the
most recently entered track.
• If you enter more than 8 tracks, you can change
pages of the program list with [PREV H ]
[NEXT G].
• To erase all tracks in the program at once, select "ALL
CLEAR" at the bottom of the track list.
PLAY
CLEAR
Press [STOP C] to temporarily stop the playback.
You can resume the playback by pressing
[PLAY B].
Press [STOP C] twice to cancel the programmed playback.
6 1:30
3
Repeat step 2 until you select all the tracks you
want to play in the program.
4
Press [PLAY B] to play the programmed tracks.
RANDOM PLAYBACK
This function shuffles the playing order of
tracks.
1
In the stop mode, press
[MODE] twice.
RANDOM
CD-DA
TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
• The RANDOM screen appears.
PLAY
2
Press [PLAY B] to start random playback.
NOTE:
• REPEAT setting is available during random playback.
(Refer to "REPEAT TRACK" on page 19.)
3
Press [STOP C] to stop random playback.
ON-SCREEN INFORMATION
You can check the information about the current disc by pressing [DISPLAY].
For DVD-Videos
For Audio CDs
1
1
Press [DISPLAY] during playback to show current Chapter.
• The elapsed and remaining
playing time of the current
chapter will be displayed.
2
0:00:00 -0:03:30
Press [DISPLAY] again to show current Title.
• The elapsed and remaining
playing time of the current title
will be displayed.
3
9/49
1/3
EN
2
0:00:00 - 1:23:45
4/12 0:03:21 - 0:02:15
T
Press [DISPLAY] again to show current Total
Track.
4/12 0:13:45 - 0:45:40
• The elapsed and remaining
playing time of the total track
will be displayed.
T
L1
• If you are playing a dual layered disc, the layer
number will also be displayed
(L0: Layer 0 is playing. L1: Layer 1 is playing).
20
• The elapsed and remaining
playing time of the current
track will be displayed.
PROGRAM
T
B
Press [DISPLAY] again.
• The bit rate and the current
repeat setting will be displayed.
4
Press [DISPLAY] during playback to show the
current Track.
Press [DISPLAY] again to exit.
When in the PROGRAM
or RANDOM mode.
3
Press [DISPLAY] again to exit.
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 21
CHANGING THE DVD SET UP ITEMS
You can change the DVD player’s settings by pressing [SET-UP] in DVD mode.
The set up items are shown in the diagram below.
CUSTOM
INITIALIZE
LANGUAGE (P.21)
AUDIO
SUBTITLE
DISC MENU
DISPLAY (P.22)
TV MODE
STILL MODE
TV MODE
DRC
AUDIO (P.22)
PARENTAL (P.22)
OTHERS (P.23)
CUSTOM MENU
1 In the stop mode, press
A
SETUP
[SET-UP] twice to display the
DVD SETUP menu.
QUICK
CUSTOM
INITIALIZE
NOTES:
4
SET:ENTER
SELECT:K/L
EXIT:SETUP CANCEL:RETURN
• Pressing [SET-UP] once will
show TV SETUP menu partly.
• If the menu does not appear, press [STOP C] first.
Make sure the unit is in DVD mode before setting.
PARENTAL LEVEL
PASSWORD CHANGE
ANGLE ICON
AUTO POWER OFF
LANGUAGE SETTING
Use [K / L] to select the
desired item, then press
[ENTER].
SETUP
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ORIGINAL
OFF
ENGLISH
• AUDIO:
Sets the audio language.
• SUBTITLE: Sets the subtitle language.
• DISC MENU: Sets the language for DVD menu.
2
Use [K / L] to select "CUSTOM", then press
[ENTER].
5
Use [K / L] to select your desired language
from the list, then press [ENTER].
3
Use [K / L] to select the
desired item, then press
[ENTER].
Refer to the pages below for
continuation to set up each item.
6
Press [SET-UP] to exit the menu.
•
•
•
•
•
LANGUAGE setting:
DISPLAY setting:
AUDIO setting:
PARENTAL setting:
OTHERS setting:
P21
P22
P22
P22
P23
SETUP
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
CUSTOM
NOTES:
• If your desired language is not
on the list, select "OTHER" and
enter the code of the language.
(Refer to "LANGUAGE CODE
LIST" on page 27.)
• This feature may not be valid due to default setting
of the disc. In this case, press [MODE] to select the
language. (Refer to "AUDIO MENU" on page 17.)
• If you select a language that is not supported by the
disc, subtitle will be "OFF" automatically and the
default language of the disc will be selected.
• To change the language for the on-screen menus,
call up the TV SETUP menu by pressing
[SET-UP] once and set the language. (Refer to "ONSCREEN MENU LANGUAGE" on page 11.)
SETUP
LANGUAGE
LANGUAGE CODE
ON-SCREEN INFORMATION / CHANGING THE DVD SET UP ITEMS
QUICK
DVD SECTION
Press [SET-UP] twice
Please enter a 4-digit language code.
A
B
C
D
E
21
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 22
DVD SECTION
CHANGING THE DVD SET UP ITEMS
B
4
D
DISPLAY SETTING
Use [K / L] to select an item,
then press [ENTER].
SETUP
DISPLAY
TV MODE
STILL MODE
4:3 LETTER BOX
AUTO
• TV MODE: QUICK
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
• 4:3 LETTER BOX (default):
To show black bars on top and
bottom of the screen.
• 4:3 PAN & SCAN:
To show a full height picture with both sides
trimmed.
SETUP
This feature allows you to set the rating level of your
DVD discs. Playback will stop if the disc ratings
exceed the level you set.
PARENTAL LEVEL
4
DISPLAY
TV MODE
4:3 LETTER BOX
4:3 PAN & SCAN
NOTE:
SETUP
AUTO
FIELD
FRAME
Press [SET-UP] to exit the menu.
C
AUDIO SETTING
Choose the appropriate Audio settings for your
equipment as it only affects during the playback of
DVD discs.
4
Press [ENTER] repeatedly
until your desired setting
appears.
SETUP
DRC
AUDIO
ON
• DRC (Dynamic Range Control):
• ON : To compress the range of soft to loud sound.
(default)
• OFF : Output the original sound.
5
22
EN
Press [SET-UP] to exit the menu.
SETUP
PARENTAL
PASSWORD
Please enter a 4-digit password.
• Enter any 4 digits (except for 4737) to set the password for the first time, and record it for your memory.
5
6
K / L] to select
Use [K
"PARENTAL LEVEL", then
press [ENTER].
K / L] to select the
Use [K
desired level, then press
[ENTER].
SETUP
PARENTAL
PARENTAL LEVEL
PASSWORD CHANGE
SETUP
ALL
PARENTAL
PARENTAL LEVEL
ALL
8 [ADULT]
7 [NC-17]
6 [R]
DISPLAY
STILL MODE
• AUTO (default):
Automatically select the best
resolution setting (FRAME or FIELD) based on
the data characteristics of the pictures.
• FIELD:
Select "FIELD" when the pictures are still unstable
even if "AUTO" is selected. FIELD stabilizes the
pictures, although the picture quality may become
coarse due to the limited amount of data.
• FRAME:
Select "FRAME" to display relatively motionless
pictures in higher resolution. FRAME improves
the picture quality, although it may unstabilize the
pictures due to simultaneous output of two field
data.
5
Enter four-digit password with
the Number buttons, then
press [ENTER].
NOTE:
• You can access this setting directly by selecting
"QUICK" at step 2 on page 21.
• STILL MODE:
This function allows you to adjust picture resolution
and quality in the still mode.
PARENTAL SETTING
7
Press [SET-UP] to exit the menu.
CONTROL LEVELS
• ALL: All parental locks are cancelled.
• 8 [ADULT]: DVD software of any grade (adult/general/children) can be played back.
• 7 to 2: Only DVD software intended for general
use and children can be played back.
• 1 [KID SAFE]: Only DVD software intended for
children can be played back, with those intended
for adult and general use prohibited.
NOTE:
• With some DVDs, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
1:42 PM
Page 23
PASSWORD CHANGE
4
Enter current password with
the Number buttons, then
press [ENTER].
5
K / L] to select
Use [K
"PASSWORD CHANGE", then
press [ENTER].
6
Enter four-digit password with
the Number buttons, then
press [ENTER].
7
INITIALIZE
SETUP
PARENTAL
This allows you to return all items of
SETUP menu (except for PARENTAL
setting and menu language) to their default settings.
PASSWORD
Enter current password.
SETUP
PARENTAL
PARENTAL LEVEL
PASSWORD CHANGE
SETUP
1
In the stop mode, press [SET-UP] twice to
display the DVD SETUP menu.
2
K / L] to select
Use [K
"INITIALIZE", then press
[ENTER].
ALL
PARENTAL
PASSWORD
Please enter a 4-digit password.
2
3
4
1
Don't forget the password.
Press 'ENTER' to activate password.
3
Press [SET-UP] to exit the menu.
NOTE:
• If you forget the current password, enter 4737 first,
then enter your new password.
The former password will be cleared and parental
level will be set to "ALL" (default).
E
4
OTHER SETTING
Use [K / L] to select an item,
then press [ENTER] repeatedly to set the feature "ON" or
"OFF".
SETUP
OTHERS
ANGLE ICON
AUTO POWER OFF
ON
ON
• ANGLE ICON:
• ON: To show the angle icon when multiple
camera angles are available during DVD
playback. (default)
• OFF: To keep angle icon from the display.
4
K / L] to select "YES",
Use [K
then press [ENTER] twice.
• To cancel the initialization,
select "NO".
SETUP
QUICK
CUSTOM
INITIALIZE
SETUP
Press [SET-UP] to exit the menu.
Initialize?
NO
YES
DVD SECTION
06.2.13
INITIALIZE
CHANGING THE DVD SET UP ITEMS
T8202UC(EN).QX3
• AUTO POWER OFF:
• ON: To activate screen saver program and turn
off the unit automatically. (default)
• OFF: To deactivate Auto Power Off function.
NOTE:
• The screen saver program starts when there is no
input from the unit for 5 minutes in the stop mode.
After the screen saver program is activated for 15
minutes, the power is automatically turned off.
5
Press [SET-UP] to exit the menu.
23
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 24
TROUBLESHOOTING GUIDE
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following
guide for the possible remedy of a problem before contacting the Customer Service. Sometimes a performance
problem can be easily solved by checking seemingly apparent but often overlooked possibilities. It could save
your time and money.
SYMPTOM
General
TV mode
24
EN
POSSIBLE REMEDY
PAGE
No power
• Make sure the power plug is connected to an AC outlet.
• (In case of power failure) Check the breaker.
9
--
No operation by remote control
• Check if the batteries are weak or inserted incorrectly.
Replace weak batteries and insert with their polarities
(+/- signs) as indicated.
• Aim the remote control at the remote sensor and operate
within 23 feet (7 m) of the unit.
• Remove all obstacles to clear the path of the infrared signal.
• Check the infrared signal output.
• Select the correct mode to operate by pressing [SELECT].
• The operable range from the unit is 10 feet (3 m) within 15˚.
7
--26
9
--
Poor or no picture
• Check if antenna or cable is connected properly
• Check for the broken pin or wire of antenna cable.
• Check for source of reception disturbance.
• Press [SELECT] to select the correct mode.
• Perform channel scanning to memorize available TV channels.
• Try another channel. If OK, then possible station problem.
• Adjust picture control (COLOR/CONTRAST/BRIGHT etc.).
• Check for magnetism from nearby appliances and try
degaussing.
6
--9
11
-10
--
Poor or no sound
• Adjust volume control using [VOL. X / Y].
• Try another channel. If OK, then possible station problem.
---
Misspelling in captions
• Error committed by the closed captioning production company.
• Possible in a live broadcast. Not in case of a prerecorded program.
---
Text is not shown in its entirety
or a delay occurs from what is
being said
• A few seconds of delay is common for live broadcast.
If a dialogue exceeds the display capacity (220 words per
minute), selective editing is used so that the captions remain
up-to-date with the current TV screen dialogue.
--
Captions scrambled with white
boxes
• Caused by interferences of building, power lines, thunderstorms, etc.
--
No captions in a program which • The broadcast may use a time compression process to speed
must contain closed caption
up the program. The decoder cannot read the compressed
information and captions will be lost.
--
No captions in a pre-recorded
videotape with indicated closed
captions included
• Possibility of a illegal copy or an erroneous copying process
accidentally performed by the fabricator.
--
Black box in the TV screen
• You are in TEXT mode. Select CAPTION mode or "OFF".
10
06.2.13
1:42 PM
Page 25
SYMPTOM
POSSIBLE REMEDY
PAGE
DVD mode
No picture
• This unit cannot play DVD-RAM/CD-i/Photo CD/Video
CD/DVD with region codes other than "1" and "ALL".
14
Disc cannot be played
• Clean the disc.
• Place the disc correctly, with the label side up.
• Cancel the parental setting or change the control level.
26
15
22
No sound
• Correct the audio output settings.
No DTS audio is output
• This unit does not support DTS audio. This is not a malfunction.
22
--
Distorted picture
• During the playback of a 2-layered disc, pictures may stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.
• This happens right after fast forwarding or rewinding.
--
Audio or subtitle language does • The selected language is not available for audio or subtitle on
not match the setting
the DVD.
21
--
The camera angle cannot be
changed
• The DVD does not contain sequences recorded from different
camera angles.
17
Audio or subtitle language cannot be changed
• The DVD does not contain audio source or subtitles in the
selected language.
21
--
"Prohibited icon" appears on the • That operation is not available by the unit or the disc.
screen
15
CD/DVD sound dropout
--
• Scratched disc. Replace with an unscratched one.
No CD/DVD reproduction
DVD picture poor
TROUBLESHOOTING GUIDE
T8202UC(EN).QX3
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s
Manual for details on correct operations.
• Playback from a desired track and random playback are not available during playback.
25
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 26
MAINTENANCE
DEGAUSSING
IR SIGNAL CHECK
A degaussing circuit in this unit clears up color
errors on the TV screen. Color errors occur when
there is any excess magnetism close to the unit.
This circuit is designed to operate once when the
unit is first plugged in. If you see minor color
errors on the screen, unplug the unit for approximately 30 minutes. When you plug the unit again,
the degaussing circuit will operate to clear errors.
Take this step any time the TV screen is accidentally magnetized or when you move the unit.
Use the AM radio or the digital camera to check if
the remote control properly sends out the infrared
signal. It will help to define the cause of malfunction.
IF THE LASER OPTICAL PICKUP UNIT IS
DIRTY
• Press and hold any button on remote control
toward a digital camera. The remote control is
working if you confirm infrared light through the
digital camera.
• If the unit still does not perform properly when it is
operated, while referring to the relevant sections
and to “TROUBLESHOOTING GUIDE” in this
Owner’s Manual, the laser optical pickup unit may
be dirty. Consult your dealer or an Authorized
Service Center for inspection and cleaning of the
laser optical pickup unit.
Using AM radio
• Tune the AM radio to no broadcasting band.
Press any button on remote control toward
the radio. If the radio receives the signal
from remote control properly, the sound will
flutter.
Using digital camera
(including built-in camera of cellular
phone)
DISC HANDLING
• Handle the discs so that fingerprints and dust do
not adhere to the surfaces of the discs.
CABINET CLEANING
• Wipe the front panel and other exterior surfaces of
the unit with a soft cloth immersed in lukewarm
water and wrung dry.
• Never use a solvent or alcohol. Do not spray
insecticide liquid near the unit. Such chemicals
may cause damage and discoloration to the
exposed surfaces.
SERVICING
• Should your unit become inoperative, do not try to
correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
power cord and please call our help line mentioned on the front page, to locate an Authorized
Service Center.
26
EN
• Always store the disc in its protective case when it
is not used.
• To clean-off, use a soft cloth.
• Do not use a hard cloth since this
will mar the disc.
• Wipe the disc in a straight line from center to edge.
• Never wipe with a circular motion.
• Do not use detergent or abrasive cleaning agents.
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 27
APPENDIX
CABLE CHANNEL DESIGNATIONS
CATV channel
5A
2
3
4
5
6
7
8
9
10
11
12
13
A
B
TV Display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CATV channel
C
16
D
17
E
18
F
19
G
20
H
21
I
22
J
23
K
24
L
25
M
26
N
27
O
28
P
29
Q
30
W+9
TV Display
CATV channel
R
S
T
U
V
W
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
TV Display
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
CATV channel
W+10
W+11
W+12
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
53
54
TV Display
46
47
48
CATV channel
W+25
W+26
W+27
TV Display
61
62
63
CATV channel
W+40
W+41
W+42
W+13 W+14
49
50
W+28 W+29
64
65
W+43 W+44
51
52
W+30
W+31
W+32 W+33
55
56
57
58
59
60
W+34
W+35
W+36
W+37
W+38
W+39
66
67
68
69
70
71
72
73
74
75
W+45
W+46
W+47
W+48
W+49
W+50
W+51
W+52
W+53
W+54
TV Display
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
CATV channel
W+55
W+56
W+57
W+58
A-5
A-4
A-3
A-2
A-1
W+59
W+60
W+61
W+62
W+63
W+64
94
95
TV Display
91
92
93
CATV channel
W+65
W+66
W+67
TV Display
106
107
108
CATV channel
W+80
W+81
W+82
TV Display
121
122
123
W+68 W+69
109
110
96
97
98
99
100
101
102
103
104
105
W+70
W+71
W+72
W+73
W+74
W+75
W+76
W+77
W+78
W+79
111
112
113
114
115
116
117
118
119
120
W+83 W+84
124
125
LANGUAGE CODE LIST
Language
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
Frisian
Galician
Georgian
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
Language
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Code
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
Language
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Code
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
Language
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
6561
5165
6567
6569
6568
MAINTENANCE / APPENDIX
If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels
with letters or letter-number combinations. Please check with your local cable company. The following is a
chart of common cable channel designations.
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
If you choose a language that has a 3 letter language
code, the code will be displayed every time you change
the AUDIO or SUBTITLE language setting. If you
choose any other languages, '---' will be displayed
instead. (3 letter language code is written in bracket.)
27
EN
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 28
SPECIFICATIONS
GENERAL SPECIFICATIONS
TV
CRT:
Television system:
Closed caption system:
Tuner channel
TV VHF Low:
TV VHF High:
TV UHF:
CATV
VHF:
MID band:
SUPER band:
HYPER band:
13 inch in-line gun,
90˚ deflection tube
NTSC-M
§15.119/FCC
#2~#6
#7~#13
#14~#69
Terminals
Antenna input:
Video input:
Audio input:
Remote control:
Operating temperature:
5A
A5~A1, A~I
J~W
W+1~W+84
DVD
Product type:
Discs:
Output signal format:
OTHER SPECIFICATIONS
DVD Player
DVD video, Audio CD
NTSC color
Power requirements:
Power consumption
(Maximum):
Picture tube:
Dimensions:
Weight:
VHF/UHF/CATV
75 ohm unbalanced
(F-type)
RCA connector × 1
RCA connector × 1
Digital encoded
infrared light system
5°C to 40°C
(41°F~104°F)
AC 120 V, 60 Hz
70 W
13"
H: 13"
(330mm)
W: 13-15/16" (354mm)
D: 14-13/16" (377mm)
19.4 lbs. (8.8kg)
ELECTRICAL SPECIFICATIONS
Sound output:
1 speaker, 1W, 8 ohm
• Designs and specifications are subject to change without notice.
• If there is a discrepancy between languages, the default language will be English.
28
EN
T8202UC(ES).QX3
06.2.13
1:43 PM
Page 29
ÍNDICE DE CONTENIDO
PREPARATIVOS PARA EL USO . . . . . . . . . . . .29
CONEXIONES DE ANTENA/CABLE . . . . . . . . . . .29
CONEXIÓN A UN DISPOSITIVO EXTERNO
(FRONTAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
SECCIÓN DVD
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .33
MENÚ DE DISCO/MENÚ DE TÍTULO . . . . . . . . . .33
SECCIÓN TV
FUNCIONAMIENTO Y AJUSTES DEL
TELEVISOR . . . . . . . . . . . . . . . . . . . . . . . . . .31
. . . .31
. . . .31
. . . .32
. . . .32
PREPARATIVOS PARA EL USO
CONEXIONES DE ANTENA/CABLE
Enchufe el cable entrante en la toma ANT., en la parte trasera de la unidad.
Si su servicio de cable le suministra una caja convertidora o si usted utiliza un sistema de satélite, conecte
la caja con esta unidad, como se indica a continuación.
Cable
Señal de TV
Antena
o
Cable entrante desde antena
casera/empresa de cable (sin
caja de cable)
ANT.
ANT.
Parte trasera de la
unidad
O
ÍNDICE DE CONTENIDO / PREPARATIVOS PARA EL USO
INSTALACIÓN INICIAL . . . . . . . . . . . . . . . . .
PARA VER UN PROGRAMA DE TELEVISIÓN
AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . .
IDIOMA DE MENÚ DE PANTALLA . . . . . . . . .
Caja de cable o caja de satélite*
IN
*NOTA
OUT
Cable entrante desde empresa de cable
o antena de satélite
NOTA:
Antes de enchufar la antena en la
toma ANT. de la unidad, compruebe
que la patilla no está doblada. Si
está doblada, enderece la patilla
como se indica en la ilustración y
enchufe la patilla a la toma ANT. de
la unidad.
(NO DESCONECTAR DE LA CAJA)
Algunos sistemas de TV por cable utilizan
señales cifradas y requieren un convertidor
especial para recibir estos canales.
Consulte con su empresa de cable local.
Patilla doblada
Cable Enchufe
(Debe ser
enderezada)
(Patilla recta)
Para su seguridad y
para evitar daños en la
unidad, desenchufe el
cable de la antena de la
toma ANT. antes de
mover la unidad.
29
ES
T8202UC(ES).QX3
06.2.13
1:43 PM
Page 30
PREPARATIVOS PARA EL USO
CONEXIÓN A UN DISPOSITIVO EXTERNO (FRONTAL)
Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice
las tomas de entrada AUDIO/VIDEO en la parte frontal de la unidad.
Conecte las tomas de salida de Audio/Vídeo de otra fuente a la toma AUDIO y VIDEO de
esta unidad.
A continuación, utilice [SELECT] o [CH. K / L] hasta que aparezca "AUX" en la pantalla.
STANDBY-ON
OPEN/CLOSE
VIDEO
VOLUME
Por ejemplo,
videograbadora o
videocámara, etc.
CH.
STOP
SELECT
AUDIO
PLAY
A la toma de salida de audio
Cable de audio
(disponible en el mercado)
(SALIDA)
(ENTRADA)
OPEN/CLOSE
VIDEO
A la toma de salida de vídeo
AUDIO
(ENTRADA)
(SALIDA) Cable de vídeo (disponible en el mercado)
30
ES
AUX
Parte frontal de la
unidad
T8202UC(ES).QX3
06.2.13
1:43 PM
Page 31
SECCIÓN TV
FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR
PARA VER UN PROGRAMA DE TELEVISIÓN
1
Presione [STANDBY-ON y] para encender la
unidad.
3
Presione cualquier tecla para
seleccionar el idioma del menú
de pantalla.
• ENGLISH: [VOL. Y]
• ESPAÑOL: [VOL. X]
• FRANÇAIS: [CH. K]
Confirme la conexión de la
antena (o del cable) y presione
[PLAY B].
• El sintonizador explora y
memoriza todos los canales
activos de su zona.
5
Cuando la exploración ha
finalizado, el sintonizador se
detiene en el canal
memorizado más bajo.
Presione [STANDBY-ON y] para
encender la unidad.
NOTES:
Si la pantalla del televisor
muestre interferencias “de nieve”
y no funcione bien durante más
de 10 segundos, aparecerá
“SUGERENCIAS ÚTILES”.
Después de finalizar la conexión de la
antena o del cable, conecte el cable de
alimentación a una toma estándar de CA.
2
4
1
TV
- SUGERENCIAS ÚTILES 1.VERIFIQUE ANTENA/CABLE/
SATÉLITE ESTÁ BIEN
CONECTADO.
2.VERIFIQUE
“AUTOPROGRAMACIÓN DE CA.”
ESTÁ BIEN AJUSTADO.
3.LEA LA PÁGINA FRONTAL
DEL MANUAL DEL USUARIO
O PANEL TRASERO PARA EL
NO.TEL.DE AYUDA A LOS
CLIENTES.
•Compruebe si la antena o el cable están conectados
correctamente. (Consulte “CONEXIONES DE
ANTENA/CABLE” en página 29).
• Ajuste “AUTOPROGRAMACIÓN DE CA.” en el menú
de AJUSTE DE CANAL. (Consulte “AJUSTE DE
CANAL” en página 32).
• Si pese a todo esos ajustes no funcionan
correctamente, llame a nuestro teléfono de asistencia
(en la página frontal en este manual del usuario).
SELECT LANGUAGE
ENGLISH
NEXT:PRESS VOLYH
ESPAÑOL
DESPUÉS:PRESIONE VOLXH
FRANÇAIS
APRÈS:PRESSEZ CH.KH
2
Utilice [CH. K / L] o los botones numéricos
para seleccionar el número de canal deseado.
Para utilizar los botones numéricos
– INSTALACIÓN INICIAL –
CONECTE LA ANTENA O
CABLE O SATÉLITE EN
ESTA UNIDAD.
PRESIONE PLAY,
PARA REALIZAR EL
“AUTOPROGRAMACIÓN
DE CA.”.
•Canales de un dígito: (Ej.: 02, 03, 04, etc.)
Presione primero [0] para seleccionar un canal de un
dígito.
•Canales de dos dígitos: (Ej.: 12, 38, 95 ...)
Presione dos dígitos directamente.
•Canales de tres dígitos: (Ej. 115, 125 ...)
Presione primero [+100], y luego presione los últimos
dos dígitos.
CA 15
(Ejemplo)
NOTAS:
• Puede salir del menú INSTALACIÓN INICIAL
presionando [SET-UP]. Si el botón se presiona durante
la exploración de canales, el sintonizador interrumpe la
exploración y se muestra el canal memorizado más bajo.
• El menú INSTALACIÓN INICIAL se muestra cada
vez que usted enciende la unidad a menos que la
exploración se haya finalizado.
• En caso de que no pueda
recibirse ningún canal mediante la
exploración de canales, “NO HAY
NO HAY SEÑAL DE TV
SEÑAL DE TV” aparece en
pantalla. Apague la unidad y
compruebe la conexión de la
antena; a continuación, siga los pasos 1 a 5 otra vez.
• Puede cambiar el después de finalizar la INSTALACIÓN
INICIAL mediante el menú IDIOMA o el menú AJUSTE DE
CANAL. (Consulte “IDIOMA DE MENÚ DE PANTALLA” o
“AJUSTE DE CANAL” en página 32).
3
SECCIÓN TV
TV
Cuando se enciende la unidad por primera
vez, se muestra la pantalla de IDIOMA
INICIAL. Seleccione el idioma de visualización de
pantalla y ejecute la autoprogramación del canal.
Utilice [VOL. X / Y] para ajustar el volumen.
Presione [MUTE] para
VOLUMEN 20
silenciar al instante el sonido.
C C C C CC C C C C C C C C C C
Presione de nuevo para
restaurar el nivel de sonido anterior.
FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR
INSTALACIÓN INICIAL
NOTA:
• Incluso aunque apague la unidad en el modo DVD,
la unidad estará en el modo TV cuando vuelva a
encenderse.
PARA VER UN CANAL DE CABLE O SATÉLITE
Si la unidad está conectada a una caja de cable o de
satélite, utilice [CH. K / L] para seleccionar CA3 o
CA4 según el ajuste de canal de salida del dispositivo
y seleccionar el canal deseado en dicho dispositivo.
PARA VER UNA ENTRADA EXTERNA
Cuando un equipo externo esté
conectado a las tomas de entrada
frontales AUDIO/VIDEO, presione
[SELECT] o [CH. K / L]
repetidamente hasta que
aparezca "AUX" en la pantalla.
AUX
31
ES
T8202UC(ES).QX3
06.2.13
1:43 PM
Page 32
SECCIÓN TV
FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR
IDIOMA DE MENÚ DE PANTALLA
AJUSTE DE CANAL
TV
Es necesario preseleccionar el canal al
principio o en caso de haber movido el
televisor a una zona distinta.
AUTOPROGRAMACIÓN DEL CANAL
1
Presione [SET-UP].
K / L] para ir hasta
Utilice [K
"AJUSTE DE CANAL", y
presione [ENTER].
2
K / L] para ir hasta
Utilice [K
"AUTOPROGRAMACIÓN DE
CA.", y presione [ENTER].
Cuando la exploración ha
finalizado, se muestra el canal
memorizado más bajo.
Si en la pantalla del televisor
aparece "NO HAY SEÑAL DE
TV", compruebe la conexión
de la antena y vuelva a
intentar.
B AUTOPROGRAMACIÓN DE CA.
CA 15
(Ejemplo)
NO HAY SEÑAL DE TV
• La unidad puede reconocer canales de CATV como
canales de TV si el estado de la recepción es
deficiente. En tal caso, compruebe la conexión de la
antena y vuelva a intentar "AUTOPROGRAMACIÓN
DE CA.".
• La autoprogramación del canal NO es necesaria
cuando está conectado a una caja de cable o de
satélite. Simplemente seleccione el canal para
entrada de caja de cable o de satélite (ej. CA3 o
CA4) en la unidad, y seleccione el canal deseado
en la caja de cable o de satélite.
ES
2
Presione [ENTER] repetidamente para
seleccionar "ENGLISH", "ESPAÑOL" o
"FRANÇAIS".
3
Presione [SET-UP] para salir del menú.
– AJUSTE DE CANAL –
AGREGAR / BORRAR (CATV)
NOTAS:
32
Presione [SET-UP].
K / L] para ir hasta
Utilice [K
"IDIOMA".
DE CANAL
DE V-CHIP
[ESPAÑOL]
[OFF]
El sintonizador explora y memoriza todos los
canales activos de su zona.
3
1
- TV PREP. B AJUSTE
AJUSTE
IDIOMA
TÍTULO
TV
Puede seleccionar el idioma del menú
de pantalla entre inglés, español y
francés.
- TV PREP. AJUSTE
AJUSTE
B IDIOMA
TÍTULO
DE CANAL
DE V-CHIP
[ESPAÑOL]
[OFF]
NOTAS:
• Esta función afecta solamente al idioma del menú de
pantalla y no a la fuente de sonido.
• Si por alguna razón el menú ya está en inglés o en
K / L] vaya
francés, presione [SET-UP] y mediante [K
a "LANGUAGE [ENGLISH]" o "LANGAGE [FRANÇAIS]",
y presione [ENTER] repetidamente para seleccionar el
idioma deseado, y presione [SET-UP].
T8202UC(ES).QX3
06.2.13
1:43 PM
Page 33
SECCIÓN DVD
AVANCE RÁPIDO / RETROCESO RÁPIDO
1
Presione [STANDBY-ON y] para
encender la unidad.
2
Presione [OPEN/CLOSE A].
3
Coloque el disco en la
bandeja, con la etiqueta hacia
arriba.
4
• Durante la reproducción, mantenga
presionado [FWD D] para avance
rápido o [REW E] para retroceso rápido.
• Cada vez que mantenga
presionado el botón, la
reproducción se acelera y el
nivel de velocidad aparece en la pantalla.
D1
SECCIÓN DVD
REPRODUCCIÓN BÁSICA
NOTAS:
• En los discos DVD, la velocidad de avance/retroceso
rápido es diferente según el disco. La velocidad
aproximada es 1 (×2), 2 (×8), 3 (×20), 4 (×50) y 5 (×100).
• En discos de CD de audio la velocidad aproximada
es 1 (×2), 2 (×8) y 3 (×30).
Presione [PLAY B].
• La bandeja se cerrará automáticamente y se
empezará la reproducción. Cuando reproduzca un
DVD que incluya un menú de títulos, este menú
puede aparecer en pantalla.
NOTAS:
• Cerrar la bandeja del disco manualmente o
presionando [OPEN/CLOSE A] también inicia la
reproducción.
• Con discos DVD que utilicen títulos para señales de
programa de reproducción, la reproducción puede
comenzar desde el segundo título o puede omitir
dichos títulos.
• Para volver a la reproducción normal, presione [PLAY B].
AVANCE LENTO / RETROCESO LENTO
• Durante la reproducción, presione [PAUSE F].
• Mantenga presionado [FWD D] para
avance lento o [REW E] para retroceso lento.
• Cada vez que mantenga
presionado el botón, la
reproducción se ralentiza y el
nivel de velocidad aparece en la pantalla.
1
NOTA:
5
NOTA:
• El sonido se silenciará en modo de pausa.
6
• La velocidad de avance/retroceso lento varía según
el disco. La velocidad aproximada es 1 (1/16), 2 (1/8)
y 3 (1/2).
Para congelar la imagen, presione [PAUSE F]
durante la reproducción.
Presione [STOP C] para
interrumpir temporalmente la
reproducción.
REANUDACIÓN ACTIVADA
Presione 'PLAY' para reproducir
desde aquí.
Para reproducir desde el inicio,
primero presione 'STOP' y luego
'PLAY'.
• Presione [PLAY B] para
reanudar la reproducción.
• Para cancelar la reanudación y parar el disco,
presione [STOP C] de nuevo.
NOTAS:
• La información de reanudación se conserva aunque
se apague la unidad.
• Puede aparecer un "icono
prohibido" en la zona superior
derecha de la pantalla del
televisor durante la operación. Esto significa que la
operación no está disponible en el disco.
REPRODUCCIÓN PASO A PASO
• Durante la reproducción, presione
[PAUSE F].
Puede avanzar la imagen fotograma a fotograma
presionando repetidamente [PAUSE F].
• Para volver a la reproducción normal, presione
[PLAY B].
• Para volver a la reproducción normal, presione
[PLAY B].
MENÚ DE DISCO/MENÚ DE TÍTULO
Un DVD puede contener menús para explorar
el disco y acceder a funciones especiales.
1
Presione [DISC MENU] o [TITLE].
• Aparecerá el menú principal/menú de título del DVD.
• Puede activar el menú incluso durante la reproducción.
2
Utilice [K / L / s / B] para seleccionar un
elemento y presione [ENTER].
NOTAS:
• SI el disco tiene un menú de disco, aparecerán
distintas opciones de selección: idioma de sonido,
subtítulos, capítulos del título y otras.
• El contenido del menú y las correspondientes
operaciones de menú pueden variar según los
discos. Para más detalles, consulte el manual que
acompaña el disco.
33
ES
T8202UC(ES).QX3
06.2.13
1:43 PM
Page 34
MEMO
34
T8202UC(ES).QX3
06.2.13
1:43 PM
Page 35
MEMO
35
T8202UC(EN).QX3
06.2.13
1:42 PM
Page 29
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows:
DURATION:
PARTS:
LABOR:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the
date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this
warranty.
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date
of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail
purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product
not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP. or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY A FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE
UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI
CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR
NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER.
FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,
please contact us at :
FUNAI CORPORATION
Customer Service
Tel :1-800-605-8610
http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501
Printed in Malaysia
1EMN21370
T8202UC★★★★★
Download PDF

advertising