Furuno FAR-2117 Radar Detector User Manual

FURUNO DEEPSEA WORLD
20” High resolution Multi-color LCD
MARINE
RADAR
WITH ARPA AND AIS DISPLAY
Models FAR-2117/2127/2137S
■ Advanced signal processing for
■ Automatic plotting/tracking of 100
improved detection in rough sea
■ LCD display providing crisp radar
images
■ Designed to comply with SOLAS
carriage requirements for ships
below 10,000 GT
■ Up to four radars can be
interswitched in the network without
an extra device
targets manually or automatically
acquired
■ Easy operation by customizable
function keys, trackball/wheel palm
module and rotary controls
■ Low spurious magnetrons meeting
ITU-R unwanted emission standards
■ Displays 1000 AIS-equipped targets
Catalogue No. R-184c
R
The future today with FURUNO's electronics technology.
FURUNO ELECTRIC CO., LTD.
9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111
Fax: +81 (0)798 65-4200, 66-4622 URL: www.furuno.co.jp
TRADE MARK REGISTERED
MARCA REGISTRADA
Improved target detection capabilit
give the best and reliable performan
EBL control
VRM control
Menu Item Selector
(wheel and enter keys)
Cursor Control
User
Customizable
Function Keys
Full-keyboard Control Unit
The control head has logically arranged controls in
a combination of push keys and trackball. Well organized
menu ensures that all operations can be done by trackball.
Palm Control Unit
Alternative to the Full-keyboard
Control Unit or additional as
a remote operation.
ty and user interface
nce
100 Base-TX Ethernet Network System
Radar System 2
Radar System 1
Independent
Antenna Unit
Display
Unit
Antenna Unit
Display
Unit
100 Base-TX
Other Radar Images
Chart Information
COG, SOG, STW, etc.
Antenna Unit
Display
Unit
Repeater
The radars can be connected to an Ethernet network for a variety of user
requirements. SOLAS Chapter V as amended requires X- and S-band radars
for ships 3000 GT and over. Each of X- and S-band radars can be
interswitched without using an extra option. Up to four radars can be
interchanged in the network. In addition, the essential navigational information
including the electronic chart, L/L, COG, SOG, STW, etc. can be shared in
the network.
The display unit employs a 20” LCD which provides
an effective picture diameter of larger than 250 mm.
The SXGA monitor provides crisp radar images, which
are presented in a selectable color with a day and night
background color for easy observation in all lighting
conditions. Different colors are assigned for marks,
symbols and texts for user-friendly operations.
Display
Unit
Interswitch
Interswitch
The revolutionary FAR-21x7 series of X- and S-band
radars are the result of FURUNO’s 50 years of experience
in marine electronics and advanced computer technology.
This series is designed to meet the exacting standards of
the International Maritime Organization (IMO) below
10,000 GT.
Antenna Unit
Antenna Unit
Display
Unit
Antenna Unit
Display
Unit
Target detection is enhanced by sophisticated signal
processing techniques. Two guard zones can be set at
required ranges in any sector. Other ship’s movements
are assessed by advanced target tracking software and
alerted by CPA/TCPA data readouts. The FAR-21x7
series can display AIS-equipped ships, when connected
with an AIS transponder.
The radar antenna is available with 4, 6.5, or 8 feet
radiator.For the X-band, the rotation speed is selectable
from 24 rpm for standard radars or 42 rpm for HSC.
The S-band radar is also available with the antenna
radiator of 10 or 12 feet. The S-band radar assures target
detection in adverse weather where an X-band is heavily
affected by sea or rain clutter.
OS data cell
Water temp,
Depth,
Wind
DATA Cell 1
Tracking data
Magnify
DATA Cell 2
Tracking data
DATA Cell 3
AIS
Information
Targets
automatically
acquired
AIS-equipped
target selected
for data reading.
DATA DISPLAY
A variety of navigational information, own ship status, radar plotting
data, wind, water temperature and information from other shipborne
sensors are displayed on the cells. These selected targets are
marked with a square symbol on the radar display. Magnify is
a special feature of the FURUNO radars FAR-21x7 series. This looks
like a delayed-sweep zoom that the IMO strictly prohibits, but where
the Administration accepts, the Magnify feature enlarges part of radar
display for some special maritime activity.
TARGET ASSOCIATION (Fusion)
An AIS-equipped ship may be displayed by both AIS and ARPA
symbols. This is because the AIS position is measured by a GPS
in L/L while the ARPA target blip and data are measured by range
and bearing from own ship and located on the radar PPI.
When the symbols are within an operator-set criteria, the ARPA
symbol is merged in the AIS symbol. The criteria are determined
by the differences in range, bearing, course, speed, etc.
MARKS AND SYMBOLS
FOR ARPA AND AIS
AIS information
■ Static Data
MMSI (Maritime Mobile Service Identity)
IMO number (Where available)
Call sign & name
Length and beam
Type of ship
Location of position-fixing antenna on
the ship
■ Voyage related data
Ship’s draught
Hazardous cargo (type)
Destination and ETA (at masters discretion)
■ Dynamic data
Ship’s position with accuracy
indication and integrity status
UTC
Course over ground (COG)
Speed over ground (SOG)
Heading
Navigation status (manual input)
Rate of turn (where available)
Update rates Dependent on speed and
course alternation (2 s – 3 min)
■ Short safety-related messages
Free messages
X-band antenna for FAR-2117, 2127
Performance Monitor
built in
S-band antenna for FAR-2137S
8 ft antenna
(4 or 6.5 ft also available)
FAR-2117
FAR-2127
FAR-2137S
X-band, 12 kW, TR up
X-band, 25 kW, TR up
S-band, 30 kW, TR up
GUARD ZONES
Performance Monitor
built in
Automatic Acquisition Zone
Two automatic acquisition zones may be set in a sector or any form. They also
act as suppression zones, avoiding unnecessary overloading to the processor
and clutter by disabling automatic acquisition and tracking outside them. Targets
in a automatic acquisition zone appear as inverse triangle. The operator can
manually acquire important targets without restriction.
CPA Alarm Zone
Target tracking symbol changes to a triangle when its predicted course (vector)
violates the operator set CPA/TCPA. The operator can readily change the vector
lengths to evaluate target movement trend.
Guard Zones
Guard Zones and Anchor Watch Zone
Guard Zones generate visual and audible alarms when targets enter the operator
set zones. One of Guard Zones may be used as an anchor watch to alert
the operator when own ship or targets drift away from the set zone.
TARGET TRAILS
The target trails feature generates monotone or gradual shading afterglow
on all objects on the display. The shading afterglow paints the display just like
on an analog PPI. The monotone trails are useful to show own ship movement
and other ship tracks in a specific fishing operation. The trail time is adjustable
for 15, 30 s, 1, 3, 6, 15, 30 min or continuous. The target trails are indicated
in a different color from background. The unique feature in this radar is
a choice of True or Relative mode in Relative Motion (only True in TM).
NIGHT VIEW
RADAR MAP
Map Marks
Map Lines
Up to 200 waypoints and up to 30 routes can be stored. Each
route may contain up to 30 waypoints. A radar map is a
combination of map lines and marks whereby the user can define
and input the navigation area, route planning and monitoring
data. The radar map has the capacity of 3,000 points for lines
and marks. The map data can be memorized to facilitate
repeated use on a routine navigation area.
Specifications of FAR-2117/2127/2137S
Antenna Radiators
1. Type
8. Parallel index lines
1, 2, 3 or 6 lines (menu selectable)
Slotted waveguide array
2. Beamwidth and sidelobe attenuation
X-Band
Radiator Type
S-Band
XN-12AF XN-20AF XN-24AF SN-30AF SN-36AF
4 ft
6.5 ft
8 ft
10 ft
12 ft
Length
Beamwidth(H)
Beamwidth(W)
Sidelobe (within ± 10°)
1.9°
20°
-24 dB
1.23°
20°
-28 dB
0.95°
20°
-28 dB
2.3°
25°
-24 dB
1.8°
25°
-24 dB
Sidelobe (outside ± 10°)
-30 dB
-32 dB
-32 dB
-30 dB
-30 dB
S-band 10 ft radiator usable for an HSC
3. Rotation
X-Band
Rotation
Gear Box
24 rpm
RSB-096
S-Band
42 rpm
RSB-097
21/26 rpm
RSB-098
45 rpm
RSB-100
RSB-099
RSB-101
RSB-102
RF Transceiver
1. Frequency
X-band:
S-band:
Automatic Plotting
1. Acquisition
100 targets (e.g. manually 50, automatically 50)
2. Tracking
Automatic tracking of all acquired targets in 0.1 to 32 nm
3. Guard zone
Two zones, one of them 0.5 nm depth
4. Vector
True or relative 30 s, 1, 3, 6, 12, 15, 30 min for prediction of
target motion
5. Past positions
5 or 10 past positions at intervals of 30 s,1, 2, 3, 6 min.
6. Collision warning
CPA limit: 0.2 - 10 nm, TCPA limit: 0 - 99 min.
9410 MHz ± 30 MHz
3050 MHz ± 30 MHz
7. Trial maneuver
Dynamic or static, with selected delay time.
2. Output power
Output Power
Transceiver
9. Radar map
20,000 points to create coastlines, own ship safety contour,
isolated underwater dangers, buoys, traffic routing systems,
prohibited areas, fairways as required by IMO.
AIS Display (Data input from AIS is required)
FAR-2117
12 kW
RTR-078
FAR-2127
25 kW
RTR-079
3. Pulselength/PRR
Range scale (nm) Pulselength (µs)
0.125, 0.25
0.07
0.5
0.07, 0.15
0.75, 1.5
0.07, 0.15, 0.3
3
0.15, 0.3, 0.5, 0.7
6
0.3, 0.5, 0.7, 1.2
12, 24
0.5, 0.7, 1.2
48, 96
1.2
4. I.F.
60 MHz, Logarithmic
5. Bandwidth
Short pulse:
Middle pulse:
Long pulse:
FAR-2137S
30 kW
RTR-080
PRR (Hz)
3000
3000
3000, 1500
3000, 1500, 1000
1500, 1000, 600
1000, 600
600
40 MHz
10 MHz
3 MHz
Radar Display
1. Display
20.1" color LCD (SXGA 1280 x 1024 pixels),
400 (H) x 320 (V) mm,
Effective display diameter: 308 mm
Echo Color: Yellow, green or white in 32 levels
2. Range scales and ring intervals (nm)
Range: .125, .25, .5, .75, 1.5, 3, 6, 12, 24, 48, 96
Ring: .025, .05, .1, .25, .25, .5, 1, 2, 4, 8, 16
3. Minimum range
30* m on 0.75 nm range scale
*Using a 10 m2 test target at 3.5 m high above sea and
antenna at 15 m high (IEC 60936-1). Different conditions give
a different result, maybe close to 20 m in actual installations.
4. Range discrimination
30 m on 0.75* nm range scale
5. Range ring accuracy
+0.2 %
1. Symbols
Sleeping, Activated, Dangerous, Selected, Lost targets
2. Number of targets
1,000 targets max.
3. Data indication
Basic and expanded data
Power Supply (specify when ordering)
1. Processor Unit
24 VDC or 115/230 VAC, 1ø, 50/60 Hz,
7.6 A (FAR-2117: 24 rpm at 24 VDC),
8.8 A (FAR-2127: 24 rpm at 24 VDC)
440 VAC, 1ø, 50/60 Hz with optional transformer RU-1803
2. Display Unit
24 VDC or 115/230 VAC, 1ø, 50/60 Hz, 2.3 A (24 VDC)
440 VAC, 1ø, 50/60 Hz with optional transformer RU-1803
3. Antenna Unit
FAR-2137S:
230 VAC, 3ø, 60 Hz; 380 VAC, 3ø, 50 Hz; 440 VAC, 3ø, 60 Hz
115 VAC, 3ø, 60 Hz with optional transformer RU-5693
230 VAC, 3ø, 50 Hz with optional transformer RU-6522
440 VAC, 3ø, 50 Hz with optional transformer RU-5466-1
This series of radar comply with the following IMO and
IEC standards:
● IEC 60936-1 shipborne radar
● IEC 60936-2 HSC radar
● IEC 60872-1 ARPA
● IEC 60872-2 ATA
● IEC 601993-2 AIS
● IEC 61162-1 ed 2
● IEC 60945 General requirements
6. Presentation modes
Head-Up, Course-Up, North-Up, North-Up TM
● IMO MSC.64(67) Annex 4
7. Heading information
Furuno GPS compass is a recommendable heading sensor as
a backup of a gyrocompass.
Confirm with your Administrations.
● IMO MSC.74(69) Annex 3
● IMO A.823(19)
EQUIPMENT LIST
Standard
1. Display Unit MU-201CR
2. Processor Unit RPU-013
3. Full-keyboard Control Unit RCU-014
Trackball Control Unit (Palm Control Unit) RCU-015 (Specify when ordering)
4. Antenna Unit with cable, 15/20/30/50/100 m (Specify when ordering)
5. Power Supply unit PSU-007 for FAR-2137S
6. Standard Spare Parts and Installation Materials
Option
1. Performance Monitor PM-31 for FAR-2117/27
PM-51 for FAR-2137S (Specify when ordering)
2. Remote Control Unit RCU-016
3. Gyro Interface GC-10 (built in Processor Unit)
4. DVI-Analog RGB Conversion Kit (Buffer board built in) OP-03-180
5. RGB Connector DSUB-BNC-1 (for VDR)
6. Card Interface Unit CU-100
7. Transformer RU-1803/5466-1/5693/6522
8. Rectifier RU-3424/1746B
9. Junction Box RJB-001
10. Antenna Cable RW-9600
11. External Alert Buzzer OP03-21
12. Hand Grip FP03-09840
13. Bracket FP03-09820
14. Hub HUB-100
INTERCONNECTION DIAGRAM
Antenna Unit (Specify when ordering)
For FAR-2137S
For FAR-2117/2127
Performance Monitor
PM-51
Performance Monitor
PM-31
RW-9600, 15 m
RW-9600
15/20/30/50/100 m
Junction Box RJB-001
DPYCY x 3 (DPYCY-6 x 2 + TPYCY-2.5) +
TTYCY-4 + RG-12/U, 70 - 270 m
Junction Box RJB-001
RW-9600, 15 m
Display Unit
MU-201CR
5m
Power Supply Unit
PSU-007
Processor
Unit
RPU-013
250V-DPYCY-1.5
Remote Control Unit
RCU-016
Full-keyboard
Control Unit
RCU-014
DVI-Analog RGB
Convirsion Kit
Gyro Interface
GC-10
10/20/30 m
03S-9610
10/20/30 m
10/20/30 m
IEC 61162-1
250V-TTYC-1
GP-90 (Position, SOG, COG)
SDME (STW for ARPA)
IEC 61162-1
250V-TTYC-4
AIS FA-100
RW-4846
ECDIS
INS
RGB Connector
D-Sub-BNC-1
VDR
IEC 61162-1
250V-MPYC-7
Gyro Compass
Gyro Converter
AD-100
GPS Compass
DVI out
250V-TTYC-1
Ethernet
100Base-TX
Trackball Control Unit
RCU-015
External Alarm
HUB
FAR-28x7
Card Interface Unit
CU-100
115 VAC, 3
230 VAC, 3
230 VAC, 3
380 VAC, 3
440 VAC, 3
440 VAC, 3
, 60 Hz*
24 VDC
, 50 Hz* 115 VAC, 1 , 50/60 Hz
, 60 Hz 230 VAC, 1 , 50/60 Hz
, 50 Hz 440 VAC, 1 , 50/60 Hz*
, 50 Hz*
, 60 Hz
24 VDC
115 VAC, 1 , 50/60 Hz
230 VAC, 1 , 50/60 Hz
440 VAC, 1 , 50/60 Hz*
Option or Shipyard Supply
Power
Specify power supply when ordering
*Optional transformer required
Antenna Unit for FAR-2117/2127
XN-20AF: 39 kg 86 lb
XN-24AF: 42 kg 93 lb
137 5.4"
570 22.4"
4- 15
468 18.4"
XN-20AF: 2040 80.3"
XN-24AF: 2550 100.4"
18
0.7"
124 4.9"
1260 49.6"
18
0.7"
555 21.9"
XN12AF: 33 kg 73 lb
300 11.8"
468 18.4"
300 11.8"
Antenna Unit for FAR-2137S
Processor Unit RPU-013
4- 15
10 kg 22 lb
8- 15
250 9.8"
286 11.3"
98
90
360 14.2"
18.3 kg 40.4 lb
95
3.7"
411 16.2"
11
534 21.0"
0
4.3
Full-keyboard Control Unit RCU-014
.9"
"
3.7 kg 8.2 lb
35
Bracket
(option)
136 5.4"
180 7.1"
4
17
Hand Grip
(option)
45
409 16.0"
526 20.7"
287 11.3"
352 13.9"
308 12.1"
398 15.7"
4- 4
39 1.5"
54 2.1"
92 3.6"
11.0 kg 33.5 lb
Trackball Control
Unit RCU-015
160 6.3"
136 5.4"
110 4.3" 4- 4
180 7.1"
490 19.3"
30 80
1.9" 3.2"
2.4 kg 5.3 lb
110 4.3" 4- 4
136 5.4"
4- 8
420 16.5"
296 11.7"
79 296 11.7"
3.1" 454 17.9"
2.4 kg 5.3 lb
Remote Control
Unit RCU-016
35 1.4"
50 2.0"
89 3.5"
160 6.3"
180 7.1"
506 19.9"
506 19.9"
534 21.0"
25
1.0"
340 13.4"
380 15.0"
27
1.1"
561 22.1"
Display Unit MU-201CR
Panel mount
7
0.3"
350 13.8"
498 19.6"
418 16.5"
183 7.2"
350 13.8"
432 17.0"
432 17.0"
137
5.4"
420 16.5"
710 28.0"
530 20.9"
410 16.1"
378 14.9"
275 10.8"
110 105 100 105 110
4.3" 4.1" 3.9" 4.1" 4.3"
Bracket mount
2- 7
385 15.2"
370 14.6"
SN-36AF: 3765 148.2"
SN-30AF: 3090 121.7"
421 16.6"
432 17.0"
184 7.2"
SN-30AF: 127 kg 280 lb
SN-36AF: 133 kg 293.2 lb
35 1.4"
50 2.0"
89 3.5"
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
FURUNO U.S.A., INC.
FURUNO DANMARK AS
Camas, Washington, U.S.A.
Phone: +1 360-834-9300 Telefax: +1 360-834-9400
Hvidovre, Denmark
Phone: +45 36 77 45 00 Telefax: +45 36 77 45 01
FURUNO (UK) LIMITED
FURUNO NORGE A/S
Denmead, Hampshire, U.K.
Phone: +44 2392-230303 Telefax: +44 2392-230101
Ålesund, Norway
Phone: +47 70 102950 Telefax: +47 70 127021
FURUNO FRANCE S.A.
FURUNO SVERIGE AB
Bordeaux-Mérignac, France
Phone: +33 5 56 13 48 00 Telefax: +33 5 56 13 48 01
Västra Frölunda, Sweden
Phone: +46 31-7098940 Telefax: +46 31-497093
FURUNO ESPANA S.A.
FURUNO FINLAND OY
Madrid, Spain
Phone: +34 91-725-90-88 Telefax: +34 91-725-98-97
Espoo, Finland
Phone: +358 9 4355 670 Telefax: +358 9 4355 6710
04055Y Printed in Japan