Furuno FCV-292 Fish Finder User Manual

Back
Your Local Agent/Dealer
9-52 Ashihara-cho,
Nishinomiya, Japan
Telephone :
0798-65-2111
fax
0798-65-4200
:
All rights reserved.
Printed in Japan
FIRST EDITION : OCT. 1994
L1
PUB.No. OME-23520
( TENI
) FCV-292
: DEC. 24,2003
*00080637800*
*00080637800*
*00080637800*
*OME23520L10*
*OME23520L10*
*OME23520L10*
SAFETY INFORMATION
FOR THE OPERATOR
WARNING
CAUTION
Do not open the cover of
the equipment.
Do not place liquid-filled containers
on the top of the equipment.
This equipment uses high voltage
electricity which can shock, burn,
or cause death.
Only qualified personnel should
work inside the equipment.
Fire or electrical shock can result if a liquid
spills into the equipment.
Do not dissasemble or modify the
equipment.
Do not place heater near the equipment.
Heat can melt the power cord, which can
result in fire or electrical shock.
Do not operate the unit with wet hands.
Fire, electrical shock or serious injury can result.
Electrical shock can result.
Immediately turn off the power at the
ship's mains switchboard if water or
foreign object falls into the equipment
or the equipment is emitting smoke or
fire.
Use the correct fuse.
Use of the wrong fuse can cause fire or
equipment damage.
Continued use of the equipment can cause fire,
electrical shock or serious injury.
(Continued on next page)
ii
SAFETY INFORMATION
FOR THE INSTALLER
WARNING
CAUTION
Only qualified personnel
should work inside the
equipment.
Ground the equipment to
prevent electrical shock and
mutual interference.
This equipment uses high voltage
electricity which can shock, burn,
or cause death.
Ungrounded equipment can give
off or receive electro-magnetic
interference or cause electrical
shock.
Turn off the power at the ship's mains
switchboard before beginning the
installation. Post a warning sign near
the switchboard to ensure that the
power will not be applied while the
equipment is being installed.
Serious injury or death can result if the power is
not turned off, or is applied while the equipment
is being installed.
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply can
cause fire or equipment damage. The voltage
rating appears on the label at the rear of the
equipment.
NOTICE
The mounting location must satisfy the
following conditions:
Away from rain and water splash
Out of direct sunlight
Away from air conditioner vents
Away from magnets and magnetic fields
Moderate and stable in temperature and
humidity
iv
Table of Contents
A Word To Furuno FCV-292 Owners:.................................................................. i
Features ................................................................................................................................ i
1.HANDLING PRECAUTION ................................................................................ 1
2.SYSTEM CONFIGURATION.............................................................................. 2
3.PRINCIPLE OF OPERATION ............................................................................ 3
4.OPERATING CONTROLS ................................................................................. 4
5.BASIC OPERATION .......................................................................................... 6
Power ON/OFF and Brilliance Control................................................................................... 6
Demonstration Picture........................................................................................................... 6
Presentation Mode Selection ................................................................................................ 6
Zoom Picture Selection......................................................................................................... 9
Automatic Operation ........................................................................................................... 12
Manual Operation ............................................................................................................... 12
Picture Advance Speed Selection ....................................................................................... 14
Eliminating Low Intensity Echoes........................................................................................ 15
Turning on A-Scope Presentation ....................................................................................... 15
Measuring Depth to Fish School ......................................................................................... 15
6.FISH AND BOTTOM ALARMS........................................................................ 16
7.ADJUSTING PICTURE BY MENU .................................................................. 18
Eliminating Interference (NOISE LIMITER) ......................................................................... 18
Eliminating Low Level Noise (CLUTTER LEVEL)................................................................ 19
Adjusting Preset Gain ......................................................................................................... 19
Selecting Background Color and Echo Color (HUE SELECTION)....................................... 20
8.DISPLAYS ........................................................................................................ 21
Video Sounder Picture ........................................................................................................ 21
Navigation Data .................................................................................................................. 24
9.INTERPRETING THE DISPLAY ...................................................................... 25
Frequency........................................................................................................................... 25
Detecting Area .................................................................................................................... 25
Zero Line ............................................................................................................................ 26
Fish School Echoes ............................................................................................................ 27
Bottom Echo ....................................................................................................................... 27
Surface Noise/Aeration ....................................................................................................... 28
vii
10.MAINTENANCE ............................................................................................. 29
Fuse Replacement ..............................................................................................................29
Cleaning ..............................................................................................................................29
Maintenance of Transducer .................................................................................................30
11.TROUBLESHOOTING ................................................................................... 31
Basic Troubleshooting .........................................................................................................31
Diagnostic Self-Check .........................................................................................................33
Transducer Check ...............................................................................................................34
Speed/Temperature Sensor (Option) Check ........................................................................34
12.INSTALLATION .............................................................................................. 35
Display Unit Installation .......................................................................................................35
Transducer Installation ........................................................................................................37
Transducer Preparation and Painting ..................................................................................37
Speed/Temperature Sensor.................................................................................................38
Cable Connections ..............................................................................................................39
13.SYSTEM MENU SETTING............................................................................. 41
Operation Procedure ...........................................................................................................41
Description of System Menu Item ........................................................................................42
Restoring Factory Settings ..................................................................................................44
14.SPECIFICATIONS.......................................................................................... 45
Complete Set.......................................................................................................................47
Installation Materials............................................................................................................48
Accessories.........................................................................................................................48
Spare Parts .........................................................................................................................48
Option..................................................................................................................................48
Transducer & Hull Bottom Installation Materials...................................................................49
APPENDIX
1. Changing Transducer Output Power Setting ....................................................................... A-1
2. Changing Transducer Frequency Specifications ................................................................. A-2
3. Adjustment After Replacement of MAIN or AMP Board (entering amplifier
gain offset) .......................................................................................................................... A-4
4. Transducer 50BL-12/50BL-24H........................................................................................... A-6
5. New BLT Transducers......................................................................................................... A-7
OUTLINE DRAWING ................................................................................ D-1
INTERCONNECTION DIAGRAM ........................................................................... S-1
viii
4.Transducer 50BL-12/50BL-24H
When using the transducer 50BL-12/50BL-24H, see this section.
50BL-12 code no.: 000-015-013
50BL-24H code no.: 000-015-040
Transducer, thru-hull pipe and tank list
Frequency
(kHz)
Transducer
(Code No.)
Hull
Material
Tank
(Code No.)
Fasten inside
hull (Code No.)
Fasten outside
hull (Code No.)
Steel
T-702
(000-015-041)
TFB-5000
(000-015-206)
-
FRP
T-702F
(000-015-240)
TRB-1000
(000-015-215)
-
Steel
T-694
(000-015-046)
TFB-5000
(000-015-206)
TFB-4000
(000-015-205)
FRP
T-694F
(000-015-242)
TRB-1000
(000-015-215)
-
Steel
T-693
(000-015-044)
TWB-6000
(000-015-207)
TWB-7000
(000-015-209)
FRP
T-693F
(000-015-241)
TRB-1100
(000-015-218)
-
Steel
T-696
(000-015-048)
TWB-6000
(000-015-207)
TFB-7000
(000-015-209)
FRP
T-696F
(000-015-244)
TWB-1100
(000-015-218)
-
Steel
T-697
(000-015-239)
TWB-6000
(000-015-207)
TFB-7000
(000-015-209)
FRP
T-697F
(000-015-245)
TWB-1100
(000-015-218)
-
Steel
T-695
(000-015-047)
TWB-6000
(000-015-207)
TFB-7000
(000-015-209)
FRP
T-695F
(000-015-243)
TRB-1100
(000-015-218)
-
50BL-12
50
50BL-24H
50/200
28/50
50/88
50/200
50BL-12/200B-8B
28F-24H/50BL-24H
50BL-24H/88F-126H
50BL-24H/200B-12H
Setting
For the locations of JP10 and JP11, see page A-1.
Board
02P6204
MAIN
Board
02P6204
MAIN
A-6
Frequency (kHz)
Output (kW)
50
Transducer
JP10 and JP11 setting
2
5BL-12
B
3
50BL-24H
D
S1
Frequency (kHz)
1
2
3
4
28/50
ON
ON
ON
ON
50/88
ON
OFF
ON
OFF
50/200
ON
OFF
OFF
ON
5.New BLT Transducers
A new type BLT transducer (Bolt-clamp Langevin Transducer) has been developed for this
echo sounder. The BLT transducer has large bandwidth, good sound efficiency, compact
structure and is reinforced for protection against slamming.
28BL-6HR code no.: 000-015-081
28BL-12HR code no.: 000-015-082
38BL-9HR code no.: 000-015-083
38BL-15HR code no.: 000-015-092
50BL-12HR code no.: 000-015-093
50BL-24HR code no.: 000-015-094
Transducer, thru-hull pipe and tank list
Frequency
(kHz)
28/200
38/200
50/200
28/38
28/50
38/50
28/88
Transducer
Hull
Material
Tank
(Code No.)
Fasten inside
hull (Code No.)
Fasten outside
hull (Code No.)
Steel
T-693
(000-015-044)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-693F
(000-015-241)
TRB-1100 (2)
(000-015-219)
-
Steel
T-693
(000-015-044)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-693F
(000-015-241)
TRB-1100 (2)
(000-015-219)
-
Steel
T-693
(000-015-044)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-693F
(000-015-241)
TRB-1100 (2)
(000-015-219)
-
Steel
T-681
(000-015-849)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-681F
(000-015-850)
TRB-1100 (2)
(000-015-219)
-
Steel
T-681
(000-015-849)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-681F
(000-015-850)
TRB-1100 (2)
(000-015-219)
-
Steel
T-681
(000-015-849)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-681F
(000-015-850)
TRB-1100 (2)
(000-015-219)
-
Steel
T-682
(000-015-851)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-682F
(000-015-852)
TRB-1100 (2)
(000-015-219)
-
28BL-6HR/200B-8B
38BL-9HR/200B-8B
50BL-12HR/200B-8B
28BL-12HR/38BL-15HR
28BL-12HR/50BL-24HR
38BL-15HR/50BL-24HR
28BL-12HR/88F-126H
A-7
NEW BLT TRANSDUCERS
38/88
50/88
28/200
38/200
50/200
28/150
38/150
38/150
A-8
Steel
T-682
(000-015-851)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-682F
(000-015-852)
TRB-1100 (2)
(000-015-219)
-
Steel
T-682
(000-015-851)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-682F
(000-015-852)
TRB-1100 (2)
(000-015-219)
-
Steel
T-683
(000-015-853)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-683F
(000-015-854)
TRB-1100 (2)
(000-015-219)
-
Steel
T-683
(000-015-853)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-683F
(000-015-854)
TRB-1100 (2)
(000-015-219)
-
Steel
T-683
(000-015-853)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-683F
(000-015-854)
TRB-1100 (2)
(000-015-219)
-
Steel
T-683
(000-015-853)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-683F
(000-015-854)
TRB-1100 (2)
(000-015-219)
-
Steel
T-683
(000-015-853)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-683F
(000-015-854)
TRB-1100 (2)
(000-015-219)
-
Steel
T-683
(000-015-853)
TWB-6000 (2)
(000-015-207)
TFB-7000 (2)
(000-015-209)
FRP
T-683F
(000-015-854)
TRB-1100 (2)
(000-015-219)
-
38BL-15HR/88F-126H
50BL-24HR/88-126H
28BL-12HR/200B-12H
38BL-15HR/200B-12H
50BL-24HR/200B-12H
28BL-12HR/150B-12H
38BL-15HR/150-12H
50BL-24HR/156-12H
NEW BLT TRANSDUCERS
Setting
For the locations of JP10 and JP11, see page A-1.
Board
Frequency (kHz)
Output (kW)
28
02P6204
MAIN
38
50
Board
Transducer
JP10 and JP11 setting
2
28BL-6HR
B
3
28BL-12HR
C
2
38BL-9HR
C
3
38BL-15HR
E
2
50BL-12HR
D
3
50BL-24HR
E
S1
Frequency (kHz)
1
2
3
4
28/50
ON
ON
ON
ON
02P6204
38/50
OFF
ON
ON
ON
MAIN
50/88
ON
OFF
ON
OFF
50/200
ON
OFF
OFF
ON
A-9
1
2
S-1
3
A
NMEA
J4
指示器
DISPLAY UNIT
CV-291/292
MJ-A6SPFD
TXD-H
1
TXD-C
2
RXD-H
3
RXD-C
4
NC
5
SHIELD
6
SPEED/TEMP
J5
B
MJ-A6SPF0012,5m
航法装置
P
NAV AID
P
MJ-A6SPFD
GND
1
VTH-H
2
VTH-C
3
SPD
4
+10V
5
船速・水温センサー
8m
P
SPEED/TEMP SENSOR
ST-01MSB
T-02MSB
6
FUSE
7A: 12V
3A: 24/32V
MJ-A3SPF0013,3.5m,φ6
シロ WHT
POWER
J3
(+)
(-)
GND
MJ-A3SPFD
1
クロ BLK
2
3
C
1
TX-L
GND
IV-2.0SQ
TX-H
J1
5
J2
1
2
3
4
NCS-254P
1
2
3
2
整流器
RECTIFIER
PR-62
6
4
NCS-254P
DPYC-1.5 *1
100/110/220 VAC
50/60 Hz, 1φ
*3
D
送受波器
XDCR
注記
*1)造船所手配
*2)工場にて接続済み
*3)FCV-292のみ
DRAWN
Sep. 30 '02
CHECKED
Oct. 1 '02
APPROVED
T.YAMASAKI
送受波器
XDCR
NOTE
*1: SHIPYARD SUPPLY.
*2: FITTED AT FACTORY.
*3: ONLY FOR FCV-292.
TITLE
名称
Y.KIMURA
相互結線図
Oct. 1, '02
SCALE
DWG.No.
FCV-291/292
カラー魚群探知機
MASS
kg
C2351-C01- F
NAME
COLOR VIDEO SOUNDER
INTERCONNECTION DIAGRAM
船内電源
SHIP'S MAINS
12/24-32 VDC
Download PDF

advertising