Furuno FRS-1000A Radar Detector User Manual

Integrated navigation package
RADAR / PLOTTER / SOUNDER
Models FRS-1000A/1000B/1000C
The future today with FURUNO's electronics technology.
Catalogue No. L-156c
FURUNO ELECTRIC CO., LTD.
9-52 Ashihara-cho, Nishinomiya City, Japan Telephone: +81 (0)798 65-2111
Telefax: +81 (0)798 65-4200, 66-4622, 66-4623
TRADE MARK REGISTERED
MARCA REGISTRADA
Announcing the World's First Four-in-One,
Integrated Navigation Package.
The FRS-1000 series offers on clear color LCD:
●
●
●
●
High definition X-Band Radar picture
Accurate GPS/DGPS positioning
Video Plotting with or without radar overlay
600 W/1 kW dual frequency Echo Sounder
FRS-1000A:With 4 kW, 36 nm radar
FRS-1000B:With 4 kW, 48 nm radar
FRS-1000C:With 6 kW, 64 nm radar
MODE keys:
Infrared sensor
Turn radar,
plotter and echo
sounder on and off.
for remote controller
Emergency
man-overboard key
Photo shows typical Radar/Plotter/Echo Sounder display.
Softkeys:
Used to select menu options
and enter numeric data.
MENU keys:
To utilize radar, plotter and
echo sounder control menus
Remote Controller
(Standard supply)
3.5 ft radar antenna for the 48 nm FRS-1000B
Compact high-sensitivity
GPS antenna
4 ft radar antenna for the 64 nm FRS-1000C
DGPS antenna (H-field)
2 ft radome antenna for the 36 nm FRS-1000A
DGPS antenna (E-field)
(Whip antenna optional)
■ All-in-One complete navigation system
■ Automatic radar plotting option ARP-10
comprising:
- Radar
- GPS Receiver (DGPS optional)
- Video Plotter
- Echo Sounder
Vividly clear pictures on the 10.4" TFT
color LCD
Works with the latest FURUNO
MiniCharts or NAVIONICS Nav-Charts
available to enhance the radar plotting
function
50/200 kHz echo sounder transducer,
600 W or 1 kW output power
Optional built-in DGPS beacon receiver
Optional 48 rpm radar antenna for
high-speed boats (FRS-1000B/1000C only)
Simple operation with an easy-tounderstand menu structure plus
Omni-pad and softkeys
Space-saving, waterproof display
suitable for protected and open bridge
installation
Up to two full function remote displays
can be added as options
■
■
■
■
■
■
(PCMCIA type also acceptable)
■ Radar picture overlay on a Furuno digital
■
chart
Head-up*, Course-up*, North-up and True
Motion* modes for both radar and video
plotter (* with FURUNO chart only)
■
■
IInnovative
nnovative Integration
Integration of
of
R
Radar,
adar, G
GPS/
PS/P
Plotter
lotter and
and E
Echo
cho Sounder
Sounder
with
with no-compromise.
no-compromise. Highly
Highly advanced
advanced
performance
performance and
and easy
easy operation
operation
Full-featured, All-in-One Navigation Package
A revolutionary new all-in-one navigation package
is now available from FURUNO. The world's first
Radar/Plotter/Sounder Models FRS-1000A/1000B/
1000C provide an ultimate solution to needs of a
wide range of boaters.
simple operation of the radar, GPS plotter and
echo sounder.
One or two remote displays can be optionally
added. The main display unit and the individual
remote displays can be operated independently of
This intelligent system permits you to present a
each other. Thus, the remote display on the upper
radar display, GPS chart plotter and dual-frequency deck may be set to echo sounder mode while the
echo sounder pictures independently or in
main display in the navigation bridge is used as the
combination on a highly visible 10.4-inch TFT color radar/GPS plotter, for example.
LCD screen.
Optional supplies include the Auto Plotter ARP-10,
The individual system elements are ingeniously
DGPS beacon receiver kit with GPS/DGPS
integrated without sacrificing the ease of operation. antenna, speed/temperature sensors, as well as
The straightforward menu structure combined with FURUNO or NAVIONICS chart cards.
the OMNI-pad and softkeys ensures remarkably
GPS
GPS Receiver
Receiver//Plotter
Plotter
The GPS receiver allows high accuracy position fixes.
There is the choice of four presentation modes:
North-up, Head-up, Course-up and True Motion.
Plotter control menu
Chart data loaded from a FURUNO or NAVIONICS
chart card (optional) presents coastlines with place
names, depth contours, buoys, lighthouses and other
navigational marks.
Nav data display
Course
bar
Plotter display with control menu
Cursor position
Range/bearing
to cursor
Own ship
Waypoint data
Depth
contour
Cursor
Planned
route
Lighthouse
Plotter display in north-up mode
The plotter control menu is called up by pressing the
[PLTR] Menu/Esc key. This menu permits you to zoom in
and out the plotter display, select display modes, enter
waypoints, and so forth by combined use of the softkeys
and Omni-pad.
Marks can be entered in different shapes, line types and
colors to record your own secret points.
Plotter/Sounder display
When you have specified a destination or the next
waypoint, you may set a cross-track-error (XTE) alarm
zone. This will make it easier to keep your vessel on the
correct course.
The plotter display can be either overlaid with the radar
image or combined with the echo sounder picture.
Radar
Radar
Four presentation modes are available:
Head-up, Course-up, North-up and True Motion
modes. In the True Motion mode, own ship and
targets move according to their actual speed and
heading while fixed targets including land echoes
remain stationary. The user can easily understand
the overall situation.
Radar control menu
Standard features include two VRMs and two
EBLs, off-centering to cursor position, echo trails,
echo stretch and guard zone alarm.
Heading mark
Radar display with control menu
Nav data display
Cursor position
EBL 1
Range/bearing
to cursor(+)
VRM 1
VRM 2
Waypoint data
EBL 2
VRM 2
VRM 1
EBL 2
EBL 1
Cursor
Radar/Sounder display
Radar display in north-up mode
The radar control menu is displayed by pressing the
[RDR] Menu/Esc key. This menu permits you to switch
the radar between transmit and standby conditions,
select range scales, adjust gain/clutter suppression,
and control EBLs/VRMs by using the softkeys and
Omni-pad.
The guard zone alarm permits you to set a fan- or
ring-shaped guard zone at a desired position with a
choice of inward or outward target alerting.
A 48 rpm antenna is optionally available for the
FRS-1000B or FRS-1000C to ensure uninterrupted
picture updating for high-speed vessels.
Radar/Plotter/Sounder display
Auto
Auto Plotter
Plotter ARP-10
ARP-10 (option)
(option)
The Auto Plotter ARP-10 option is added to the processor unit.
It permits automatic or manual acquisition of up to 10 targets,
tracks them at specified plot intervals, presents alphanumeric
target data, and triggers a collision alarm for targets violating
preset CPA/TCPA limits.
Tracked
target
Target acquisition :
Target
data
Heading data in AD-10 format required
Automatic or manual acquisition of up to 10
targets in 0.2-16 nm
Tracking range :
0.1-16 nm
Vector mode :
True or relative vector
Vector length :
30 sec, 1, 2, 3, 4, 5, 6 or 12 min.
Target plot interval : 15 or 30 sec, 1, 2, 3 or 6 min.
Audio-visual alarm : Produced against lost targets and targets on
collision course
Target data display : Range, bearing, course, speed and
CPA/TCPA of a chosen target
ARP-10 can not be used with 48 rpm antenna speed option
Echo
Echo Sounder
Sounder
The high-performance 50/200 kHz echo sounder
meets the need of recreational and professional
fishermen.
It presents echoes in Normal (single or dual
frequency), Bottom zoom, Bottom lock or Marker
zoom display mode.
The automatic bottom-tracking function, which can
be activated in the Normal display mode, tracks the
seabed of varying depths by automatically phasing
the sounding range and setting optimum receiver
gain. This relieves you of the need for frequent
adjustment when you are busy maneuvering the
ship or fishing.
Nav data display
Depth
Water
temperature
Sounder display in dual-frequency mode
The dual-frequency sounding shown above facilitates
discrimination of bottom features and detection of
individual fish or fish schools.
To call up the sounder control menu, just press the
[SNDR] Menu/Esc key. You can then select a desired
sounding range, adjust the receiver gain, phase the
sounding range, move the variable depth marker, and
so forth on this menu by simply using the softkeys and
Omni-pad.
Alarms can be set to alert you to dangerous water
depths and fish echoes. A water temperature alarm is
also available if an appropriate sensor is connected to
the system.
If you press the [SNDR] Mode key to present the echo
sounder picture when the radar or plotter picture is
already displayed, the echo sounder picture will be
displayed at the right of the screen as shown on the
preceding pages.
Sounder control menu
Sounder display with control menu
Bottom-lock expansion
Marker zoom
SYSTEM CONFIGURATION
GPS/DGPS ANTENNA
GPA-016
RADAR ANTENNA
GPA-018S
*3(For DGPS)
GPA-019S
*3(For DGPS)
Optional
Whip antenna
For FRS-1000A
For FRS-1000B
For FRS-1000C
RSB-0071-057
XN8-RSB-0082-064 (24 rpm)
XN8-RSB-0083-064 (48 rpm)
XN12A-RSB0070-059 (24 rpm)
XN12A-RSB0073-059 (48 rpm)
15 m
Standard
DISPLAY UNIT
RSD-001
GYRO
CONVERTER
AD-100
HEADING
SENSOR
PG-1000
PROCESSOR UNIT
RSM-001
DGPS
BEACON
RECEIVER
BOARD *3
AUTO
PLOTTER
ARP-10 *2
REMOTE
DISPLAY UNIT
RSD-002 *1
Cable length
30 m max from
Processor unit
to the last
remote display.
RECTIFIER
RU-1746B-2
MATCHING
BOX
MB-1000
10.5 to 40.0 VDC
115/230 VAC
1∅, 50/60 Hz
10.5 to 40.0 VDC
TRANSDUCER
REMOTE
DISPLAY UNIT
RSD-002 *1
SPEED/TEMP.
SENSOR
50/200 kHz 50/200 kHz
600 W
1 kW
*1: Up to two remote display units
(Specify when ordering)
may be connected.
*2: 48 rpm antenna cannot
be used and heading data in AD-10 or NMEA0183
format required
*3: DGPS requires built-in beacon
receiver board
10.5 to 40.0 VDC
Optional
SPECIFICATIONS OF FRS-1000A/1000B/1000C
GENERAL
EQUIPMENT LIST
10.4-inch color LCD, 640 (H) x 480 (V) dots
(1) Radar (2) Plotter (3) Echo sounder
(4) Radar/Plotter(5) Radar/Echo sounder
(6) Plotter/Echo sounder
(7) Radar/Plotter/Echo sounder
10.5 to 40.0 VDC, 100 W max
RADAR
1. Antenna Type Output Power/Max Range
FRS-1000A: 60 cm radome (24 rpm)/4 kW/36 nm
FRS-1000B: 3.5 ft open (24 rpm/48 rpm*)/4 kW/48 nm
FRS-1000C: 4 ft open (24 rpm/48 rpm*)/6 kW/64 nm
*Specify when ordering
2. Presentation Modes
Head-up, Course-up*, North-up*, True motion**
*Heading data required **Heading and speed data required
3. Principal Functions
Auto tuning/anti-clutter, Echo Trails, Echo Stretch, two EBLs/VRMs,
Picture Zoom (2x), Guard Zone Alarm
GPS PLOTTER
Eight discrete channels, C/A code, all-in-view
10 m, 95% of the time, HDOP≤4
(less than 5 m with optional DGPS, 95% of the time)
0.15 to 2560 nm
3. Map Scale
4. Capacity Plotter
2800 points for ship's track, 3800 marks, 200 waypoints (incl. starting
point and externally entered waypoint), 20 planned routes (Max 30
waypoints/route)
5. Presentation Modes
Head-up*, Course-up*, North-up, True motion* *With FURUNO chart only
6. External Memory
Card slot for optional FURUNO and NAVIONICS chart ROM cards
and RAM cards for storage of track points and marks
7. Other Functions
MOB, Arrival/anchor watch, XTE alarm
ECHO SOUNDER
1. Operating Frequency
2. Output Power
Dual-frequency 50 and 200 kHz
600 W or 1 kW rms
(Optional matching box required for 1 kW output)
Normal, Bottom zoom, Bottom lock,
Marker zoom display
8 colors
8 basic ranges customized to max 1200 m
(4000 ft, 650 fa)
Up to 2400 m (8000 ft, 1300 fa)
3. Display Modes
4. Display Colors
5. Basic Ranges
E/S Transducers (specify when ordering)
600W
50/200 kHz: 520-5PSD (plastic, thru-hull), 520-5MSD (bronze, thru-hull),
520-5PWD (plastic, transom),
520ST-PWD (plastic, transom with speed/temp sensor),
524ST-MSD (bronze, thru-hull with speed/temp sensor)
1 kW (Optional matching box required)
50/200 kHz: 50/200-1T
50 kHz:
50B-6, 50B-6G
200 kHz:
200B-5, 200B-5S
6. Range Phasing
7. Principal Functions
Automatic bottom tracking, Variable picture advance, Variable depth
marker, Alarms for preset water depth, fish echoes, ship speed* and
water temperature* (Appropriate sensors required.)
Antenna Unit
4.1 kg 9.0 lb
85 3.4''
331 13.0''
● DGPS antenna
GPA-019S
0.1 kg 0.2 lb
0.3 kg 0.7 lb
1.0 kg 2.2 lb
Whip antenna
optional
∅62 2.4"
57.4 2.3"
20.3 0.8"
277 10.9''
265 10.4''
(MAX286 11.3")
15 0.6''
● DGPS antenna
GPA-018S
126 4.9"
110 4.3"
307 12.1''
● Radar antenna for FRS-1000A
● GPS antenna
GPA-016
67.4 2.7"
Display Unit
30°
5-∅7
127 5.0''
127 5.0''
Processor Unit
29
1.1''
27.5
1.1''
27.5
1.1''
156
Bow 4-M10
(160 6.3’’) Fixing Holes
Cable Entry
6.1"
40
∅6
∅602
40 1.5"
(55 2.2'') 94 3.7''
6 kg 13.2 lb
8.0 kg 17.6 lb
(160 6.3’’)
1. Receiver Type
2. Accuracy
266 105’’
POWER SUPPLY
Standard
1. Display unit RSD-001
1 unit
2. Processor unit RSM-001
1 unit
3. Radar antenna (Specify when ordering)
1 unit
FRS-1000A (60 cm radome/24 rpm/4 kW/36 nm)
FRS-1000B (3.5 ft open/24 or 48 rpm/4 kW/48 nm)
FRS-1000C (4 ft open/24/ or 48 rpm/6 kW/64 nm)
Antenna cable: selectable from 10/15/20/30 m
4. Remote Controller RMC-010
1 unit
5. GPS GPA-016 antenna with 15 m cable
1 unit
6. Video/Data cables 5 m each
1 unit
7. Installation materials and spare parts
1 set
Optional
1. Internal DGPS beacon receiver kit
2. Remote display unit (2 units max)
3. Extension cables for Video/Data
(specify cable length from 5/10/15/20/30 m)
4. Auto plotter ARP-10 (24 rpm antenna only)
5. Chart ROM card
(FURUNO PCMCIA/MiniChart or NAVIONICS PCMCIA/Nav-ChartTM)
6. RAM card (256, 512 kB or 1 MB)
7. Speed/temperature sensor ST-01MSB
8. Temperature sensor T-02MTB, T-02MSB, T-03MSB
9. Transducer matching box MB-1000
10. Gyro converter AD-100
11. 30 m extension cable for GPS antenna
12. 10 m extension cable for E/S transducer
13. GPS antenna base
13-QA330 (Pipe mount), 13-QA310 (Offset bracket),
13-RC5160 (Handrail mount)
14. NMEA cable 10 m FM-C6SPF001-100 (10 m)
15. Rectifier RU-1746B-2
16. Rectifier PR-62 for remote display unit RSD-002
17. DGPS antenna for GPA-018S or GPA-019S
116 4.6"
Display Unit
Display Modes
348 13.7’’
278 10.9’’
● Radar antenna for FRS-1000C
● Radar antenna for FRS-1000B
23 kg 50.7 lb
22 kg 44.1 lb
280 11.0"
175 6.9"
1255 49.4"
445 17.5"
542 21.3"
Fixing Holes
Fixing Holes
4-∅6
213 8.4"
CHART CARD
355 14.0"
(203 8.0")
219 8.6"
(200 7.9’’)
Bow
250 9.8"
438 17.2"
9
0.4"
(39 1.5") (190 7.5")
Cable Entry
25
250 9.8"
340 13.4"
Bow
250 9,8"
(200 7.9’’)
441 17.4"
542 21.3"
1040 41.0"
213 8.4"
357 14.1"
438 17.2"
Cable Entry
4- 15
25
(200 7.9’’)
250 9.8"
340 13.4"
4- 15
(200 7.9’’)
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
FURUNO U.S.A., INC.
FURUNO DANMARK AS
Camas, Washington, U.S.A.
Phone: +1 360-834-9300 Telefax: +1 360-834-9400
Hvidovre, Denmark
Phone: +45 36 77 45 00 Telefax: +45 36 77 45 01
FURUNO (UK) LIMITED
FURUNO NORGE A/S
Denmead, Hampshire, U.K.
Phone: +44 2392-230303 Telefax: +44 2392-230101
Ålesund, Norway
Phone: +47 70 102950 Telefax: +47 70 127021
FURUNO FRANCE S.A.
FURUNO SVERIGE AB
Bordeaux-Mérignac, France
Phone: +33 5 56 13 48 00 Telefax: +33 5 56 13 48 01
Västra Frölunda, Sweden
Phone: +46 31-7098940 Telefax: +46 31-497093
FURUNO ESPANA S.A.
FURUNO SUOMI OY
Madrid, Spain
Phone: +34 91-725-90-88 Telefax: +34 91-725-98-97
Helsinki, Finland
Phone: +358 9 317277 Telefax: +358 9 3412930
0005XVKS Printed in Japan
Download PDF

advertising