User`s guide | Furuno GP-1650W GPS Receiver User Manual

ELITE SERIES
FOR MODELS :
1.2T
2.2T
3.2T
4.2T
5.2T
TREADMILL USER’S GUIDE
Elite 1.2T-5.2T Rev 1.4.indd 1
8/2/05 2:46:50 PM
INTRODUCTION
INTRODUCTION
IMPORTANT
PRECAUTIONS
CONGRATULATIONS and THANK YOU for your purchase of this Elite Series treadmill!
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, an Elite Series treadmill
can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics
and innovative features you need to get stronger and healthier, faster. Because we're committed to
designing fitness equipment from the inside out, we use only the highest quality components.
ASSEMBLY
You want exercise equipment that offers the most comfort, the best reliability and the highest quality
in its class.
BEFORE
YOU BEGIN
The Elite Series delivers.
7
Before You Begin
14
Treadmill Operation
17
Conditioning Guidelines
29
Troubleshooting & Maintenance
35
Limited Warranty
38
CONTACT INFORMATION
WARNING
CONDITIONING
GUIDELINES
Assembly
TROUBLESHOOTING
& MAINTENANCE
4
Back Panel
Read all precaution and instructions in this manual before using this
equipment. Save this manual for future reference.
3
Elite 1.2T-5.2T Rev 1.4.indd 2-3
LIMITED
WARRANTY
Important Precautions
TREADMILL
OPERATION
TAB LE OF C ONTENTS
8/2/05 2:46:54 PM
INTRODUCTION
INTRODUCTION
I M P O R TA N T PRECAUTIONS
TREADMILL
OPERATION
WARNING
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided
with the product. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug
illustrated below. A temporary adapter such as the one illustrated below may be used to connect this plug to
a 2-pole receptacle as shown, if a properly grounded outlet is not available. The temporary adapter should be
used only until a properly grounded outlet can be installed by a qualified electrician. The green colored rigid
ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.
3-Pole Grounded Outlet
2-Pole Outlet in Grounded Box
ADAPTER
LIMITED
WARRANTY
GROUNDED
TREADMILL
POWER CORD
Elite 1.2T-5.2T Rev 1.4.indd 4-5
ASSEMBLY
At NO time should pets or children under the age of 12 be closer to the treadmill than 10 feet.
At NO time should children under the age of 12 use the treadmill.
Children over the age of 12 should not use the treadmill without adult supervision.
OTHER SAFETY TIPS FOR YOUR TREADMILL
WARNING
OPERATION
To reduce the risk of damaging important components on your treadmill, it is strongly
recommended that your treadmill is plugged into a dedicated 20 amp outlet, without
the use of an additional extension cord and/or power strip.
IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.
GROUNDED
TREADMILL
POWER CORD
METAL GROUNDING SCREW
4
BEFORE
YOU BEGIN
This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path
of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.
TREADMILL
OPERATION
BEFORE
YOU BEGIN
GROUNDING INSTRUCTIONS
CONDITIONING
GUIDELINES
Connect this exercise product to a properly grounded outlet only. See grounding
instructions.
• Never use the treadmill before securing the safety tether clip to your clothing.
• If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and
consult your physician before continuing.
• Do not wear clothes that might catch on any part of the treadmill.
• Always wear athletic shoes while using this equipment.
• Do not jump on the treadmill.
• Keep power cord away from heated surfaces.
• Do not insert or drop any object into any opening.
• Unplug treadmill before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp
cloth only; never use solvents. (See MAINTENANCE)
• At no time should more than one person be on treadmill while in operation.
• The treadmills should not be used by persons weighing more than 275 pounds (1.2T), 300 pounds (2.2T),
325 pounds (3.2T), 375 pounds (4.2T) and 400 pounds (5.2T).
• The treadmills are intended for in-home use only. Do not use this treadmill in any commercial, rental,
school or institutional setting. Failure to comply will void the warranty.
• Do not use treadmill in any location that is not temperature controlled, such as garages, porches, pool rooms,
bathrooms, car ports or outdoors. Failure to comply may void the warranty.
• Use the treadmill only as described in this manual.
TROUBLESHOOTING
& MAINTENANCE
ASSEMBLY
WARNING
WARNING To reduce the risk of burns, fire, electrical shock or injury to persons:
It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill has been
exposed to colder temperatures or high moisture climates, it is strongly recommended that the treadmill is
warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.
5
LIMITED
WARRANTY
IMPORTANT
PRECAUTIONS
Read all instructions before using this treadmill. When using an electrical product, basic precautions
should always be followed, including the following: Read all instructions before using this treadmill. It is the
responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings
and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the
number listed on the back panel of this manual.
IMPORTANT
PRECAUTIONS
SAVE THESE INSTRUCTIONS
8/2/05 2:46:55 PM
INTRODUCTION
INTRODUCTION
�������������
��������������������
IMPORTANT
PRECAUTIONS
IMPORTANT
PRECAUTIONS
During the assembly process of the treadmill there are several areas that special
WARNING attention must be paid. It is very important to follow the assembly instructions
correctly and to make sure all parts are firmly tightened. If the assembly
instructions are not followed correctly, the treadmill could have frame parts that
are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play in
the console masts or any forward and back play in the console assembly or handlebars. If there is any play in
these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the assembly
instructions must be reviewed and corrective actions should be taken.
�������
�������������������
���������
�������
����������������������
�����������
������������������
ASSEMBLY
���������
ASSEMBLY
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
���������������
BEFORE
YOU BEGIN
Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on
your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once
the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the
upright folded position, with the lock latch secure. Unpack the unit where it will be used. The enclosed treadmill
is equipped with high-pressure shocks and may spring open if mishandled. Never grab hold of any portion of
the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD
RESULT IN INJURY!
�������������
����������
��������������
BEFORE
YOU BEGIN
UNPACKING
������������
�����������
����������������
���������������
������������
MODEL NAME:
TROUBLESHOOTING
& MAINTENANCE
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
* Also enter this serial number on your Warranty Card.
WARRANTY REGISTRATION
LIMITED
WARRANTY
Your warranty card must be completed and sent to Horizon Fitness within thirty days of purchase or registered
online at www.horizonfitness.com, before a warranty claim can be processed. Please keep your receipt with
the user’s guide as it may be required for a warranty claim. Make sure to send in your warranty registration
card to validate your warranty.
6
Elite 1.2T-5.2T Rev 1.4.indd 6-7
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
CONDITIONING
GUIDELINES
SERIAL NUMBER:
������������������
������������
������������
����������������������
���������������
����������������������������������������
����������������
����������������
�����������
�
������������
TROUBLESHOOTING
& MAINTENANCE
ENTER YOUR SERIAL NUMBER AND
MODEL NAME IN THE BOXES BELOW:
�����
�
����������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������
7
LIMITED
WARRANTY
TREADMILL
OPERATION
Before proceeding, find your treadmill’s serial number and model name located to the left of the on/off power
switch and power cord and enter it in the space provided below.
8/2/05 2:46:56 PM
INTRODUCTION
ASSEMBLY STEP 2
packaging that is not beneath the treadmill. Do not attempt to lift the treadmill at this
time. Remove plastic wrap from console masts.
NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your treadmill, to prevent
��������
C Insert BOLT (B) through
CONSOLE MAST and secure
using NUT (C).
�������
D Repeat on other side.
A S S E M B LY S T E P 1
��������
TREADMILL
OPERATION
�������
������������
B Raise the CONSOLE MAST to the
vertical position. Be sure to hold
the console mast firmly, as it
will not stay in the upright
position on it’s own.
CONDITIONING
GUIDELINES
C Move LEFT SIDE LINKAGE ARM
into position. Insert BOLT (A)
and tighten. Slide LINK ARM
COVER over LOWER LINK ARM
joint.
D Repeat on the right side.
��������������
TROUBLESHOOTING
& MAINTENANCE
�����
�������
���
BEFORE
YOU BEGIN
BEFORE
YOU BEGIN
��������
�����
������
��������
Note: Do not pinch the wires.
A Open HARDWARE BAG 1.
HARDWARE BAG 1 CONTENTS :
��������
B Lift CONSOLE (as shown) to lock
it into place.
ASSEMBLY ��������������
STEP 3
HARDWARE BAG 3 CONTENTS :
������������������
��������
��������
�����
������
�����
�������
���
A Open HARDWARE BAG 3.
��������
B Place CONSOLE MAST COVERS
over CONSOLE MASTS as shown.
E Now cut the banding straps and
remove remaining packaging
material.*
LIMITED
WARRANTY
* NOTE: If the straps have been removed
before completing step 1-D and the
linkage arms cannot be aligned,
refer to the TROUBLESHOOTING
section (page 35) in order to restore
the treadmill to its proper position.
TREADMILL
OPERATION
ASSEMBLY
loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially
threaded in before completely tightening any ONE bolt.
IMPORTANT
PRECAUTIONS
DO NOT CUT STRAPS UNTIL STEP 1-E!* Disassemble box and remove the cardboard
�����
�������
�����
������
ASSEMBLY
��������
�����
������
CONDITIONING
GUIDELINES
WARNING
A Open HARDWARE BAG 2.
HARDWARE BAG 2 CONTENTS :
C Attach CONSOLE MAST COVERS
using 6 BOLTS (D).
�����������
������
����������
TROUBLESHOOTING
& MAINTENANCE
IMPORTANT
PRECAUTIONS
P R E - A S S E M B LY
D Place WATER BOTTLE HOLDERS
and SAFETY KEY into the correct
positions. It is now safe to plug
in your treadmill.
YOU’RE FINISHED!
8
Elite 1.2T-5.2T Rev 1.4.indd 8-9
9
LIMITED
WARRANTY
INTRODUCTION
1.2T ASSEMBLY
8/2/05 2:47:01 PM
������������
������������
���������������
���������������������
�������������
��������������������
������������
���������
�
A Open HARDWARE BAG 1.
��������������������������������������
B Connect CONSOLE WIRES.
�����������
����������
BEFORE
YOU BEGIN
��������������
D Secure and tighten all bolts.
NOTE: Do not pinch the wires.
����������������������������
�����
TREADMILL
OPERATION
������������
������������
���������������
������������������
��������������������������
����������������������������
��������������������������������������������
�����������������������������������������������������������
CONDITIONING
GUIDELINES
����������������
TROUBLESHOOTING
& MAINTENANCE
����������������
������������
�����������
�������������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������������������������
����������������������������������������������������������������
BEFORE
YOU BEGIN
C Attach CONSOLE MASTS to BASE
FRAME using 6 BOLTS (A).
���������
����������
���������������������������
���������
�����
������
�������������
�����������
���������������
INTRODUCTION
HARDWARE BAG 1 CONTENTS :
ASSEMBLY STEP 2
��������
HARDWARE BAG 2 CONTENTS :
�������
���������
�����
������
�������������
������������
TREADMILL
OPERATION
ASSEMBLY
����������
IMPORTANT
PRECAUTIONS
�������������������������������
CONDITIONING
GUIDELINES
IMPORTANT
PRECAUTIONS
�������������
ASSEMBLY STEP 1
ASSEMBLY
������������������
A Open HARDWARE BAG 2.
B Connect CONSOLE WIRES.
C Attach CONSOLE to CONSOLE
MASTS using 2 BOLTS (B).
TROUBLESHOOTING
& MAINTENANCE
�������
D Secure and tighten bolts.
NOTE: Do not pinch the wires.
LIMITED
WARRANTY
����������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������
10
Elite 1.2T-5.2T Rev 1.4.indd 10-11
11
LIMITED
WARRANTY
INTRODUCTION
2.2T – 5.2T ASSEMBLY
��������������������
8/2/05 2:47:15 PM
INTRODUCTION
ASSEMBLY STEP 5
����������
�����
������
�������������
����������
����������
�����
������
ASSEMBLY
A Open HARDWARE BAG 3.
A Open HARDWARE BAG 5.
B Attach CONSOLE SKIRT to
CONSOLE using 4 SCREWS (C).
B Lift RUNNING DECK to upright
position.
ASSEMBLY
�������
HARDWARE BAG 5 CONTENTS :
C Attach SIDE COVERS to BASE
FRAME using 6 SCREWS (D).
A S S E M B LY S T E P 4
BEFORE
YOU BEGIN
BEFORE
YOU BEGIN
IMPORTANT
PRECAUTIONS
HARDWARE BAG 3 CONTENTS :
IMPORTANT
PRECAUTIONS
A S S E M B LY S T E P 3
HARDWARE BAG 4 CONTENTS :
���������
�����
������
4.2T & 5.2T models only:
���������
A Open HARDWARE BAG 4.
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
NOTE: Since only 4.2T and 5.2T
include hand rails, this step is
skipped for models 2.2T and
3.2T. Those models will NOT
include HARDWARE BAG 4 in
the parts box.
LIMITED
WARRANTY
12
Elite 1.2T-5.2T Rev 1.4.indd 12-13
����������
�����������
Attach left and right HAND
RAILS to GRIP PULSE HAND
RAILS and BASE FRAME using
4 BOLTS (A).
����������
����������
CONDITIONING
GUIDELINES
����������
����������
TREADMILL
OPERATION
�
YOU’RE FINISHED!
TROUBLESHOOTING
& MAINTENANCE
TREADMILL
OPERATION
���������
13
LIMITED
WARRANTY
INTRODUCTION
2.2T – 5.2T ASSEMBLY
8/2/05 2:47:22 PM
TREADMILL
OPERATION
3 feet
CONDITIONING
GUIDELINES
DO NOT STAND ON THE BELT
6 feet
TROUBLESHOOTING
& MAINTENANCE
SAFETY KEY
Your treadmill will not start unless the safety key is placed in position. Attach the clip end securely to your
clothing. This safety key is designed to cut the power to the treadmill if you should fall. Check the operation
of the safety key every 2 weeks.
LIMITED
WARRANTY
WARNING
14
Elite 1.2T-5.2T Rev 1.4.indd 14-15
INTRODUCTION
MOVING - 2.2T-5.2T
Your treadmill has 4 transport wheels built into the frame. To move, make sure
the treadmill is folded and securely latched. To unlock wheels, push down on the
top lever of all 4 wheel locks located on the corners of the base frame. Then firmly
grasp the handlebars, and slowly move the treadmill. After moving to the desired
location, push down on the bottom lever of all 4 wheel locks.
WARNING
NEVER USE THE TREADMILL WITHOUT SECURING THE SAFETY KEY CLIP TO YOUR
CLOTHING. PULL ON THE SAFETY KEY CLIP FIRST TO MAKE SURE IT WILL NOT COME
OFF YOUR CLOTHING.
TREADMILL
OPERATION
BEFORE
YOU BEGIN
Your treadmill has a pair of transport wheels built into the frame. To move, make
sure the treadmill is folded and securely latched. Then firmly grasp the handlebars,
tilt the treadmill back and roll.
3 feet
While you are preparing to use the treadmill, do not stand on the belt.
Place your feet on the side rails before starting the treadmill. Start
walking on the belt only after the belt has begun to move. Never start the
treadmill at a fast running speed and attempt to jump on!
MOVING - 1.2T
WHEEL LOCKS
CONDITIONING
GUIDELINES
ASSEMBLY
Firmly grasp the back end of the treadmill. Carefully lift the end of the treadmill
deck into the upright position until the foot lock latch engages and securely
locks the deck into position. Make sure the deck is securely latched before
letting go. To unfold, firmly grasp the back end of the treadmill. Gently press
down on the foot lock latch with your foot until the lock latch disengages.
Carefully lower the deck to the ground.
LOCATION OF THE TREADMILL
1 foot
Do not operate the treadmill if the power cord or plug is damaged.
If the treadmill appears to not be working properly, do not use the treadmill.
FOLDING
The key to reaping these benefits is to develop an exercise habit. Your new treadmill will help you eliminate
the obstacles that prevent you from getting in your exercise time. Inclement weather and darkness won't
interfere with your workout when you use your treadmill in the comfort of your home. This guide provides
you with basic information for using and enjoying your new machine. A more complete knowledge of your
new treadmill will assist you in realizing your goal of a healthy lifestyle.
Place the treadmill on a level surface. There should be 6 feet of clearance
behind the treadmill, 3 feet on each side and one foot in front for folding
and the power cord. Do not place the treadmill in any area that will block
any vent or air openings. The treadmill should not be located in a garage,
covered patio, near water or outdoors.
IMPORTANT
PRECAUTIONS
WARNING
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
ASSEMBLY
HERE ARE JUST A FEW OF THE HEALTH BENEFITS OF EXERCISE:
BEFORE
YOU BEGIN
sustaining an exercise program! Your treadmill is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your treadmill can improve the quality of your life in so many ways.
NOTE: All 4 wheels MUST be locked before using the treadmill.
WARNING
Our Treadmills are heavy, use care and additional help if necessary when moving. Do
not attempt to move or transport treadmill unless it is in the upright, folded position
with the lock latch secured. Failure to follow these instructions could result in injury.
TROUBLESHOOTING
& MAINTENANCE
IMPORTANT
PRECAUTIONS
CONGRATULATIONS! on choosing your treadmill. You’ve taken an important step in developing and
Your treadmill is capable of reaching high speeds. Always start off using a slower speed and adjust the speed in small
increments to reach a higher speed level. Never leave the treadmill unattended while it is running. When not in use,
remove the safety key, turn the on/off switch to off and unplug the power cord. Make sure to follow the MAINTENANCE
schedule located on page 37 in this manual. Never step onto the treadmill when it is moving more than 0.5 mph. Keep
your body and head facing forward. Do not attempt to turn around or look backwards while the treadmill is running.
Stop your workout immediately if you feel pain, faint, dizzy or are short of breath.
LEVELING
The treadmill should be level for optimum use. Once you have placed the treadmill
where you intend to use it, raise or lower the adjustable levelers located on the
treadmill base frame. Once you have leveled the treadmill, lock the levelers in place
by tightening the nuts against the frame.
NOTE: 1.2T leveling not needed (there are no levelers).
15
LIMITED
WARRANTY
INTRODUCTION
PROPER USAGE
B E F O R E Y OU BEGIN
8/2/05 2:47:31 PM
INTRODUCTION
TREADMILL OPERATION
1.2T, 2.2T CONSOLE FEATURES & DISPLAY
IMPORTANT
PRECAUTIONS
IMPORTANT
PRECAUTIONS
Make sure that your treadmill is properly connected to a power
outlet. The on/off switch is located next to the power cord. Flip
this switch to the 'on' position, so that the switch is lit. You will
hear a beep and the console will light up.
QUICK START UP
TENSIONING THE RUNNING BELT
Simply press the START button to begin exercising.
2.2T
Press the STOP button to pause your workout.
BEFORE
YOU BEGIN
RESET
Press and hold the STOP button to reset the treadmill.
ONE TOUCH™ SPEED KEYS
2.2T also has One Touch™ Incline Keys
CENTERING THE RUNNING BELT
CONDITIONING
GUIDELINES
If the running belt is too far to the right side:
TROUBLESHOOTING
& MAINTENANCE
With the treadmill running at 1/2 mph, turn the right
adjustment bolt clockwise 1/4 TURN at a time (using
the supplied Allen wrench). Check the belt alignment.
Allow belt to run a full cycle to gauge if more adjustment
is needed. Repeat if necessary, until the belt remains
centered during use.
TREADMILL
OPERATION
TREADMILL
OPERATION
The running belt has been properly adjusted at the
factory before it was shipped. At times the belt can
move off-center during shipment. Before operating the
treadmill, make sure the belt is centered and remains
centered to maintain smooth operation.
CAUTION: Do not run belt faster than 1/2 mph while
centering. Keep fingers, hair and clothing away from
belt at all times.
Belt is too far to the right side
1.2T
When in a program, the user is able to press any of the desired ONE TOUCH™ KEYS to get to a specific speed
more quickly. NOTE: When in a speed-based program, if the user presses any of the ONE TOUCH™ SPEED
KEYS, all of the remaining speed segments in the program will be modified as well. For example, when in
P2, the first segment default speed is 2.5 mph. If the user presses the 4 mph ONE TOUCH™ SPEED KEY, all
of the remaining segments will increase by 1.5 mph as well.
CONDITIONING
GUIDELINES
BEFORE
YOU BEGIN
If you can feel a slipping sensation when running on the
treadmill, the running belt must be tightened. In most
cases, the belt has stretched from use, causing the belt
to slip. This is a normal and common adjustment. To
eliminate this slipping, turn the treadmill off and tension
BOTH THE REAR ROLLER BOLTS using the supplied Allen
wrench, turning them 1/4 TURN to the right as shown.
Turn the treadmill on and check for slipping. Repeat if
necessary, but NEVER TURN the roller bolts more than
1/4 turn at a time. Belt is properly tensioned when the
slipping sensation is gone.
PAUSE
CHANGING THE SPEED AND INCLINE
TROUBLESHOOTING
& MAINTENANCE
ASSEMBLY
CAUTION: Running belt should NOT be moving during
tensioning. Over-tightening the running belt can
cause excessive wear on the treadmill as well as its
components. Never over-tighten the belt.
ASSEMBLY
The running belt has been properly adjusted at the
factory before it was shipped. At times the belt can
move off-center during shipment.
If the running belt is too far to the left side:
LIMITED
WARRANTY
16
Elite 1.2T-5.2T Rev 1.4.indd 16-17
Belt is too far to the left side
With the treadmill running at 1/2 mph, turn the right
adjustment bolt counter-clockwise 1/4 TURN at a time
(using the supplied Allen wrench). Check the belt
alignment. Allow belt to run a full cycle to gauge if more
adjustment is needed. Repeat if necessary, until the
belt remains centered during use.
When in a program, the user is able to change the difficulty of the program by pressing the
or
buttons
to the desired level. NOTE: The user is only able to increase or decrease the incline or speed during the
program. When in a program, if the user increases or decreases the difficulty of speed or incline, all of the
remaining program speeds or incline segments will be modified as well. For example, when in P2, the first
segment default speed is 2.5 mph. If the user increases the speed, all of the remaining segments will be
increased by 1 mph as well.
17
LIMITED
WARRANTY
INTRODUCTION
TURN POWER ON
8/2/05 2:47:34 PM
INTRODUCTION
IMPORTANT
PRECAUTIONS
TIME
Press ENTER to view alternate information such as SPEED, PULSE, ELEVATION, and CALORIES during your workout.
NOTE: The console will automatically default back to show Time/Distance.
Indicates how long you’ve been working out.
Shown as ‘Minutes:Seconds’.
IMPORTANT
PRECAUTIONS
INTRODUCTION
SCAN
SPEED
ASSEMBLY
ASSEMBLY
Indicates how fast your walking or running surface is moving.
Shown as Miles Per Hour (MPH).
INCLINE
CONDITIONING
GUIDELINES
For Manual Program:
- Select a SPEED using the ARROW keys; once a speed has been chosen, press ENTER.
- Select an INCLINE % using the ARROW keys; once an incline % is chosen, press ENTER.
For ALL other Programs:
- Select a LEVEL using the ARROW keys; once a time has been chosen, press ENTER.
2) Select a TIME using the ARROW keys; once a time has been chosen, press ENTER.
3) Press the START button to begin the program.
TREADMILL
OPERATION
TREADMILL
OPERATION
1) Select a PROGRAM using the ARROW keys; once a program has been chosen, press ENTER.
Indicates the miles traveled during your workout.
Shown as Miles.
PULSE
Pulse will be displayed if the heart rate handlebars are being used. The pulse
reading is measured in beats per minute. It may take 15–20 seconds to get an
accurate reading.
Shown as Beats Per Minute.
CONDITIONING
GUIDELINES
Each program has different options from which to choose.
DISTANCE
CALORIES
Indicates the total number of calories burned during your workout.
TROUBLESHOOTING
& MAINTENANCE
TROUBLESHOOTING
& MAINTENANCE
FINISHING A WORKOUT
When your workout is finished, the treadmill console will beep and
will be flashing in the TIME window. Your
workout information will stay displayed on the console for 30 seconds before it will reset.
LIMITED
WARRANTY
18
Elite 1.2T-5.2T Rev 1.4.indd 18-19
19
LIMITED
WARRANTY
BEFORE
YOU BEGIN
G E T T I N G S TA R T E D / S E L E C T I N G A P R O G R A M
BEFORE
YOU BEGIN
Indicates the incline of your walking or running surface.
Shown as Percentage.
8/2/05 2:47:38 PM
INTRODUCTION
INTRODUCTION
3. 2T, 4. 2T, 5. 2T C O N S O L E F E AT U R E S & D I S P L AY
When in a program, the user is able to change the incline of the treadmill by pressing the ONE TOUCH™ INCLINE
KEYS or up and down buttons to the desired level. NOTE: The user is only able to increase or decrease the incline
or speed during the program. When in a program, if the user increases or decreases the difficulty of speed or
incline, all of the remaining program speeds or incline segments will be modified as well.
ASSEMBLY
ASSEMBLY
Simply press the START button to begin exercising.
CHANGING THE INCLINE
IMPORTANT
PRECAUTIONS
IMPORTANT
PRECAUTIONS
QUICK START UP
PAUSE
Press the STOP button to pause your workout.
BEFORE
YOU BEGIN
Press and hold the STOP button to reset the treadmill.
CHOOSING A PROGRAM
TREADMILL
OPERATION
TREADMILL
OPERATION
Choose a PROGRAM by pressing the program keys, or up or down buttons.
Once the desired programs is selected, press the ENTER button.
CHOOSING THE LEVEL
CONDITIONING
GUIDELINES
CONDITIONING
GUIDELINES
When in a program, the user is able to press any of the desired ONE TOUCH™ SPEED KEYS or up and down
buttons to get to a specific speed more quickly. NOTE: When in a speed-based program, if the user presses
any of the ONE TOUCH™ SPEED KEYS, all of the remaining speed segments in the program will be modified
as well. For example, when in P2, the first segment default speed is 2.5 mph. If the user presses the 4 mph
ONE TOUCH™ SPEED KEY, all of the remaining segments will increase by 1.5 mph as well. This holds true for
the incline based programs as well.
CHOOSING THE TIME
TROUBLESHOOTING
& MAINTENANCE
Choose TIME by pressing the up or down buttons or use the default time.
Once the desired time is selected, press the START button.
TROUBLESHOOTING
& MAINTENANCE
CHANGING THE SPEED
Choose the program difficulty level by pressing the up or down buttons.
NOTE: Available only on certain programs.
Once the program level has been chosen, press the ENTER button. Once in a program, the user may change the
difficulty level by pressing the up or down buttons or by pressing the ONE TOUCH™ SPEED KEYS.
NOTE: If one segment is changed, the entire program will in turn be changed. For example, when in a program,
if the user increases the speed 1 mph, all of the remaining segments will also be increased by 1 mph.
FINISHING A WORKOUT
When your workout is finished, the treadmill console will beep and STOP
will be flashing in the TIME window. Your workout information will stay
displayed on the console for 30 seconds before it will reset.
LIMITED
WARRANTY
20
Elite 1.2T-5.2T Rev 1.4.indd 20-21
21
LIMITED
WARRANTY
BEFORE
YOU BEGIN
RESET
8/2/05 2:47:42 PM
INTRODUCTION
IMPORTANT
PRECAUTIONS
PROGRAM PROFILE
Used to view your Calories and Laps during your workout.
Represents the Program profile that you have chosen.
(4.2T, 5.2T models)
IMPORTANT
PRECAUTIONS
INTRODUCTION
ENTER
CALORIES
ASSEMBLY
ASSEMBLY
Total Calories burned during your workout.
BEFORE
YOU BEGIN
Miles traveled during your workout. Shown as Miles.
LEVEL (not shown)
Difficulty level of current program.
BEFORE
YOU BEGIN
DISTANCE
LAP PROFILE
(1.2T, 2.2T, 3.2T models)
The lap profile will advance as the program advances. One lap
equals the total workout time.
TIME
TREADMILL
OPERATION
TREADMILL
OPERATION
View the time remaining or the time elapsed in your workout.
Shown as Minutes:Seconds.
SPEED
CONDITIONING
GUIDELINES
CONDITIONING
GUIDELINES
Indicates how fast your walking or running surface is moving.
Shown as MPH.
PULSE
TROUBLESHOOTING
& MAINTENANCE
TROUBLESHOOTING
& MAINTENANCE
Used to monitor your heart rate during your workout (displayed when contact is
made with both grips or the chest strap is used). It may take 15–20 seconds to
get an accurate reading.
Shown as Beats Per Minute.
LIMITED
WARRANTY
Indicates the incline of your walking or running surface.
Shown as percentage.
22
Elite 1.2T-5.2T Rev 1.4.indd 22-23
23
LIMITED
WARRANTY
INCLINE
8/2/05 2:47:50 PM
Allows ‘On The Fly’ manual speed and incline changes. Time-based goal.
INTERVALS (1.2T, 2.2T, 3.2T, 4.2T, 5.2T MODELS)
INTERVALS
PROGRAM:
INTERVALS
GOLF COURSE
Walk or run a series
ROLLING of alternating SPEED levels. Time-based goal with 10 difficulty levels to choose from.
RACE
MANUAL
GOLF
COURSE
WEIGHT
LOSS
WEIGHT LOSS
ROLLING
INTERVALS
Challenges with
various combinations of hills and valleys. Time-based goal with 10 difficulty levels to
RACE
GOLF COURSE
choose from. GOLF
COURSE
WEIGHT
LOSS
ROLLING
RACE 1
CUSTOM
RACE
GOLF COURSE
WEIGHT LOSS
TREADMILL
OPERATION
ROLLING (4.2T, 5.2T MODELS)
CONDITIONING
GUIDELINES
Lets you createTHRand
reuse a perfect workout for you with specific speed, incline and time combination. The
ZONE 2
CUSTOM
2 1
THR ZONE
ultimate in personal
CUSTOM 2programming. Time-based goal.
CUSTOM 1
TROUBLESHOOTING
& MAINTENANCE
VALLEY
THRZONE
ZONE12
THR
THR ZONE 1
CUSTOM 2
TOUR
AutomaticallyTHR
adjusts
VALLEY
ZONE 2 incline to maintain your target heart rate. Perfect for simulating the intensity of your
THR ZONE 2
favorite sport or
activity. Time-based goal (Requires wireless transmitter).
THReveryday
ZONE 1
THR ZONE PROGRAM 1 (4.2T, 5.2T MODELS)
2.0
4.0
1.0
1.5
2.0
4.5
2.0
4.5
Level 3
1.3
1.9
2.5
5.0
2.5
5.0
THR
ZONE1 1Level 4
CUSTOM
Level 5
1.3
1.9
2.5
5.5
2.5
5.5
1.5
2.3
3.0
6.0
3.0
6.0
THR ZONE 2Level 6
CUSTOM 2
Level 7
1.5
2.3
3.0
6.5
3.0
6.5
1.8
2.6
3.5
7.0
3.5
7.0
Level 8
VALLEY
THR ZONE 1Level 9
1.8
2.6
3.5
7.5
3.5
7.5
2.0
3.0
4.0
8.0
4.0
8.0
Level 10
TOUR
THR ZONE 2
2.0
3.0
4.0
8.5
4.0
8.5
LIMITED
WARRANTY
Elite 1.2T-5.2T Rev 1.4.indd 24-25
1.0
1.9
1.3
1.9
1.3
2.3
1.5
2.3
1.5
2.6
1.8
2.6
1.8
3.0
2.0
3.0
2.0
INTERVALS
ROLLING
PROGRAM:
ROLLING
Motivates withWEIGHT
different
LOSS combinations of SPEED. Time-based goal with 10 difficulty levels to choose from.
ROLLING PROGRAM SEGMENTS (all segments last 30 seconds)
GOLF COURSE
MPH
WARM-UP
1
2
3
4
5
6
7
8
1.5
2.0
2.5
3.0
3.5
4.0
3.5
3.0
2.5
1.9
2.5
3.0
3.5
4.0
4.5
4.0
3.5
3.0
1.5 1
CUSTOM
1.8
2.3
3.0
3.5
4.0
4.5
5.0
4.5
4.0
3.5
2.6
3.5
4.0
4.5
5.0
5.5
5.0
4.5
4.0
Level 1
RACE
1.0
Level 2
1.3
Level 3
Level 4
Level 5
2.0
CUSTOM
2.3 2
3.0
4.0
4.5
5.0
5.5
6.0
5.5
5.0
4.5
3.4
4.5
5.0
5.5
6.0
6.5
6.0
5.5
5.0
Level 7
2.5
TOUR
Level 8
Level 9
Level 10
3.8
5.0
5.5
6.0
6.5
7.0
6.5
6.0
5.5
THR2.8
ZONE 1 4.1
3.0
4.5
5.5
6.0
6.5
7.0
7.5
7.0
6.5
6.0
6.0
6.5
7.0
7.5
8.0
7.5
7.0
6.5
3.3
4.9
THR ZONE 2
6.5
7.5
7.5
8.0
8.5
8.0
7.5
7.0
TOUR
24
1.5
MANUAL
TOUR
Level 6
Automatically TOUR
adjusts incline to maintain your target heart rate. Perfect for simulating the intensity of your
VALLEY
favorite sport or everyday activity. Time-based goal (Requires wireless transmitter).
1.0
(WARM-UP and COOL-DOWN last 5:00 minutes each and are included in program times)
TOUR
VALLEY
VALLEY
THR ZONE 2
THR ZONE PROGRAM 2 (5.2T MODEL)
1.5
ASSEMBLY
4.0
BEFORE
YOU BEGIN
2.0
VALLEY
CUSTOM 1 (USER PROGRAM) (2.2T, 3.2T, 4.2T, 5.2T MODELS)
CUSTOM 2 (USER PROGRAM) (5.2T MODEL ONLY)
1.5
CONDITIONING
GUIDELINES
BEFORE
YOU BEGIN
RACE (3.2T, 4.2T, 5.2T MODELS)
1.0
TREADMILL
OPERATION
Simulates various inclines and yardages for holes on a golf course, with 4 tee-off boxes and 9 or 18 holes to
MANUAL 1
CUSTOM
choose from. CUSTOM
Distance-based
goal.
RACE 21
CUSTOM
Level 1
CUSTOM 2
RACE
Level 2
COOL-DOWN
2.3
1.5
2.6
1.8
3.0
2.0
3.4
2.3
3.8
2.5
4.1
2.8
4.5
3.0
4.9
3.3
5.3
3.5
5.6
3.8
TROUBLESHOOTING
& MAINTENANCE
ASSEMBLY
(peak segments last 30 seconds, valley segments last 90 seconds)
CUSTOM 1
GOLF COURSE
WARM-UP
1
2
3
4
COOL DOWN
MPH
GOLF COURSE (3.2T, 4.2T, 5.2T MODELS)
GOLF COURSE
INTERVALS
CUSTOM
MANUAL
THR
ZONE211
CUSTOM
CUSTOM
RACE 2
ROLLING
INTERVALS
Challenge theMANUAL
computer
THR
ZONE 21 to a Race, customize pace speed and distance. Program is designed to add motivation
THR
ZONE
CUSTOM
THR
ZONE211
CUSTOM
to a workout byMANUAL
allowing
WEIGHT
LOSS you to compete against a selected pacer.
ROLLING
INTERVALS
THR
ZONE 2
VALLEY
INTERVALS
THRZONE
ZONE21
THR
CUSTOM
2
GOLF
COURSE
MANUAL
WEIGHT LOSS
ROLLING
TOUR
ROLLING
VALLEY
THR
ZONE 2 combinations of speed. Time-based goal with 10 difficulty levels to choose from.
Motivates withVALLEY
different
INTERVALS
RACE
THR ZONE 1
GOLF COURSE
WEIGHT
LOSS
WEIGHT LOSS
TOUR
TOUR
VALLEY
ROLLING 1
CUSTOM
THR ZONE 2
RACE
GOLF
COURSE
GOLF COURSE
Lets you createTOUR
and LOSS
reuse a perfect workout for you with specific speed, incline and time combination. The
WEIGHT
VALLEY
CUSTOM
ultimate in personal
RACE
CUSTOM 21programming. Time-based goal.
RACE
GOLF COURSE
TOUR
THR
ZONE
CUSTOM
12 1
CUSTOM
CUSTOM 1
RACE
INTERVALS PROGRAM SEGMENTS
WEIGHT LOSS
WEIGHT LOSS (1.2T, 2.2T, 3.2T, 4.2T, 5.2T MODELS)
(WARM-UP and COOL-DOWN last 5:00 minutes each and are included in program times)
VALLEY
TOUR
25
LIMITED
WARRANTY
IMPORTANT
PRECAUTIONS
MANUAL
WEIGHT LOSS
ROLLING
INTERVALS
INTERVALS
MANUAL
WEIGHT LOSS
ROLLING
ROLLING
INTERVALS
IMPORTANT
PRECAUTIONS
ROLLING
INTERVALS
MANUAL
MANUAL
Walk or run a series of alternating paced speed levels. Time-based goal with 10 difficulty levels to choose from.
INTRODUCTION
Allows ‘On TheINTERVALS
Fly’ manual SPEED and INCLINE changes. Time-based goal.
SEGMENTS ARE REPEATED UNTIL SELECTED
TIME IS REACHED
MANUAL (1.2T, 2.2T, 3.2T, 4.2T, 5.2T MODELS)
MANUAL
MANUAL
PROGRAM:
MANUAL
SEGMENTS ARE REPEATED UNTIL SELECTED
TIME IS REACHED
INTRODUCTION
PROGRAM PROFILES
8/2/05 2:47:56 PM
WEIGHT LOSS
Level 3
ASSEMBLY
Level 4
Level 5
Level 6
Level 7
BEFORE
YOU BEGIN
Level 8
Level 9
Level 10
4
5
6
7
8
COOL-DOWN
Elevation
0.0
CUSTOM 1
Speed
1.0
0.5
1.5
1.5
1.0
0.5
0.5
0.5
1.0
1.5
0.5
0.0
1.5
2.0
2.5
3.0
3.5
4.0
3.5
3.0
2.5
2.3
1.5
Elevation
0.0
0.5
1.5
1.5
1.0
0.5
1.0
0.5
1.0
1.5
0.5
0.0
Speed
CUSTOM 2 1.3
Elevation
0.5
1.9
2.5
3.0
3.5
4.0
4.5
4.0
3.5
3.0
2.6
1.8
1.0
2.0
2.0
1.5
1.0
1.0
1.0
1.5
2.0
1.0
0.5
Speed
1.5
THR ZONE 1
Elevation
0.5
2.3
3.0
3.5
4.0
4.5
5.0
4.5
4.0
3.5
3.0
2.0
1.0
2.0
2.0
1.5
1.0
1.0
1.0
1.5
2.0
1.0
0.5
1.8
2.6
3.5
4.5
4.5
5.0
5.5
5.0
4.5
4.5
3.4
2.3
THR ZONE 1.5
2
Elevation
1.5
2.5
2.5
2.0
1.5
1.5
1.5
2.0
2.5
1.5
1.0
2.0
3.0
4.0
4.5
5.0
5.5
6.0
5.5
5.0
4.5
3.8
2.5
1.5
1.5
2.5
2.5
2.0
1.5
1.5
1.5
2.0
2.5
1.5
1.0
2.3
3.4
4.5
5.0
5.5
6.0
6.5
6.0
5.5
5.0
4.1
2.8
Elevation
1.5
TOUR
Speed
2.5
MANUAL 1.5
Elevation
2.0
3.0
3.0
2.5
2.0
2.0
2.0
2.5
3.0
2.0
1.5
3.8
5.0
5.5
6.0
6.5
7.5
6.5
6.0
5.5
4.5
3.0
2.0
3.0
3.0
2.5
2.0
2.0
2.0
2.5
3.0
2.0
1.5
Speed
2.8
INTERVALS
Elevation
2.0
4.1
5.5
6.0
6.5
7.0
7.5
7.0
6.5
6.0
4.9
3.3
2.5
3.5
3.5
3.0
2.5
2.5
2.5
3.0
3.5
2.5
2.0
Speed
3.0
ROLLING 2.0
Elevation
4.5
6.0
6.5
7.0
7.5
8.0
7.5
7.0
6.5
5.3
3.5
2.5
3.5
3.5
3.0
2.5
2.5
2.5
3.0
3.5
2.5
2.0
Speed
3.3
WEIGHT LOSS
4.9
6.5
7.0
7.5
8.0
8.5
8.5
7.5
7.0
5.6
3.8
Speed
Speed
Elevation
VALLEY
Speed
TREADMILL
OPERATION
(WARM-UP and COOL-DOWN last 5:00 minutes each and are included in program times)
PGOLFRCOURSE
OGRAM: GOLF COURSE
Simulates various
RACEINCLINES and yardages for holes on a golf course, with 4 tee-off boxes and 9 or 18 holes to choose from.
Distance-based goal.
GOLF COURSE PROGRAM SEGMENTS
CONDITIONING
GUIDELINES
CUSTOM 1
HOLE
NUMBER:
2
3
4
5
6
7
8
9
Elevation
CUSTOM0.0
2
1.0
2.0
3.0
2.5
1.0
2.0
2.5
1.5
Distance
359
283
256
113
387
91
351
333
White tee
9 holes
Elevation 0.0 1.0
THR ZONE 1
Distance 331 427
2.0
3.0
2.5
1.0
2.0
2.5
1.5
330
295
129
466
91
369
431
Blue tee
9 holes
Elevation 0.0 1.0
THR ZONE
Distance
3452 460
2.0
3.0
2.5
1.0
2.0
2.5
1.5
337
308
142
484
97
389
441
Black tee
9 holes
Elevation
Red tee
18 holes
Elevation
Red tee
9 holes
TROUBLESHOOTING
& MAINTENANCE
White tee
18 holes
LIMITED
WARRANTY
26
Elite 1.2T-5.2T Rev 1.4.indd 26-27
1
309
0.0
1.0
2.0
3.0
2.5
1.0
2.0
2.5
1.5
Distance
VALLEY376
502
374
327
187
500
106
416
462
10
11
12
13
14
15
16
17
18
2482
2875
3003
3250
0.0
1.0
2.0
3.0
2.5
1.0
2.0
2.5
1.5
3.5
2.5
2.0
4.0
2.5
3.0
2.0
5.0
2.0
Distance
TOUR 309
Elevation 0.0
359
283
256
113
387
91
351
333
301
301
165
288
434
312
310
150
455
1.0
2.0
3.0
2.5
1.0
2.0
2.5
1.5
3.5
2.5
2.0
4.0
2.5
3.0
2.0
5.0
2.0
Distance
427
330
295
129
466
97
369
431
407
339
179
368
548
349
376
166
509
331
TOTAL
DISTANCE
Blue tee
18 holes
Elevation
0.0
1.0
2.0
3.0
2.5
1.0
2.0
2.0
1.5
3.5
2.5
2.0
4.0
2.5
3.0
2.0
5.0
2.0
Distance
345
460
337
308
142
484
97
389
441
413
349
187
376
560
373
383
383
532
Black tee
18 holes
Elevation
0.0
1.0
2.0
3.0
2.5
1.0
2.0
2.5
1.5
3.5
2.5
2.0
4.0
2.5
3.0
2.0
5.0
2.0
Distance
376
502
374
327
187
500
106
416
462
430
373
201
393
572
396
401
178
543
Distance = Yards
5198
6116
6348
6737
CUSTOM
1. Once
the2 RACE PROGRAM has been chosen, press ENTER.
IMPORTANT
PRECAUTIONS
3
2. Choose
THR ZONEa1desired Pace (Speed) using the SPEED ARROW KEYS and press ENTER. The selected pace
is the pace you will be racing against. You will choose your own speed after the program has started
and
WARM-UP is complete.
THR ZONE 2
3. Choose a desired Distance (Miles) using the SPEED ARROW KEYS and press ENTER.
VALLEY
ASSEMBLY
Level 2
2
MANUAL
4. Press START to begin workout.
TOUR
INTERVALS
Note: this is a distance-based program. The time it will take you to complete the race is determined by
the speed and distance selected.
ROLLING
• Upon pressing
START, the program will be broken up into 16 segments. The first segment will be dedicated to
WEIGHT LOSS
a WARM-UP, which will be half of the selected pace (Speed). The middle segments will consist of the RACE,
with the last
segment dedicated to a COOL-DOWN, which will be half of the selected Pace (your speed will
GOLF COURSE
automatically be reduced for cool-down segment). NOTE: The race distance does not include the time for
WARM-UPRACE
and COOL-DOWN (as they are a set time of 2.5 minutes each).
• You can adjust your own speed at any time during the program by pressing the SPEED KEYS or by using the
ONE TOUCH™ SPEED KEYS.
CUSTOM 1
• You can set the Pace (speed) from 1.0 mph - 12.0 mph (in .5 mph increments) and Distance from 1 - 10 miles
(in 1 mile increments). NOTE: 3.2T model sets Pace (speed) from 1.0 mph - 10.0 mph)
CUSTOM 2
• If you beat
the pacer to the finish line, the console will flash and scroll YOU WIN and begin your cool-down.
If the pacer wins, the console will flash and scroll PACER WINS. Then, you will finish the race and begin
your cool-down.
THR ZONE 1
BEFORE
YOU BEGIN
Level 1
1
SEGMENTS ARE REPEATED UNTIL SELECTED TIME IS REACHED
IMPORTANT
PRECAUTIONS
RACE
Challenge theCUSTOM
computer
to a Race, customize pace SPEED and DISTANCE. Program is designed to add motivation
1
to a workout by allowing you to compete against a selected pacer.
TREADMILL
OPERATION
Challenges with
various combinations of hills and valleys (INCLINE & SPEED levels). Time-based goal with 10 difficulty
GOLF COURSE
levels to choose from.
WEIGHT LOSS PROGRAM SEGMENTS (all segments last 30 seconds)
WARM-UP
INTRODUCTION
RACE
PROGRAM:
RACE
THR ZONE 2
PROGRAM:
THR ZONE 1 & 2
CONDITIONING
GUIDELINES
PWEIGHT
R OLOSSG R A M : W E I G H T L O S S
ZONE 1 or THR ZONE 2 program key is selected (4.2T, 5.2T models), you will see the TARGET HEART
Once the THRVALLEY
RATE flashing in the PULSE window. Using the heart rate chart (page 30), determine your target heart rate. Your target
heart rate should
TOUR be set at a number that you will be able to exercise at throughout the majority of your workout. To
adjust the target heart rate, press the up or down buttons.
• Once you have chosen your target heart rate, wait for five seconds and you will see the time flashing in the Time
window. Press the up or down buttons to adjust your time. Once you choose your time, press the START button
and begin your workout.
• The THR ZONE 1 or THR ZONE 2 program will have a 5 minute warm up time before it will get you in your ‘target
heart rate zone’.
• After the 5 minute warm up period, the incline level will increase gradually to get the user to the entered ‘target
heart rate zone’. Once the user is at the ‘target heart rate zone’, plus or minus 5 beats, the incline level will
remain at the current incline level.
• The last 5 minutes of the program will begin the cool down period. At this time, the program will gradually decrease
the incline level to give the user a smooth cool down.
TROUBLESHOOTING
& MAINTENANCE
INTRODUCTION
GOLF COURSE
ROLLING
27
LIMITED
WARRANTY
INTERVALS
8/2/05 2:47:58 PM
BEFORE
YOU BEGIN
RACE
*NOTE: The Chest Strap Transmitter is required to use the THR ZONE 1 & 2 program (the chest strap is not
1
included withCUSTOM
the 4.2T
model, must purchase separately).
TREADMILL
OPERATION
PCUSTOM
R O2 G R A M : C U S T O M 1 & 2
Your Custom Programs
1 & 2 are designed to allow you to create your own programming, with the ability to save your
THR ZONE 1
program settings for future workouts. To use your Custom Programs 1 & 2, follow these instructions:
THR ZONE
1. Once
the2 Custom Programs 1 & 2 has been chosen, press ENTER.
2. Choose your desired time using the up or down buttons or incline keys and press
VALLEY
CONDITIONING
GUIDELINES
ENTER.
TOUR your desired speed using the up or down buttons or incline keys and press
3. Choose
ENTER. You will need to select a speed for all 16 segments, pressing ENTER after
each segment. Note: 2.2T & 3.2T have 15 segments.
TROUBLESHOOTING
& MAINTENANCE
4. Once all 16 speed segments have been chosen, you will need to select your desired
incline level for each segment as well. Choose your desired incline level using the
up or down buttons or incline keys and press ENTER. Once you have chosen your
desired incline level for all 16 segments, press START to begin your program. At
this time, your program has been successfully saved into memory, and can be used
for future workouts.
IMPORTANT
PRECAUTIONS
ASSEMBLY
APPLY MOISTURE HERE
The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain cardiovascular
fitness. If you have other goals such as weight or fat loss, you will achieve your goal faster with more frequent exercise.
Whether it’s 3 days or 6 days, remember that your ultimate goal should be to make exercise a lifetime habit. Many
people are successful staying with a fitness program if they set aside a specific time of day to exercise. It doesn’t
matter whether it’s in the morning before breakfast, during lunch hour or while watching the evening news. What’s
more important is that it’s a time that allows you to keep a schedule, and a time when you won’t be interrupted. To
be successful with your fitness program, you have to make it a priority in your life. So decide on a time, pull out your
day planner and pencil in your exercise times for the next month!
HOW LONG? (Duration of Workouts)
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 60 minutes per
session. But start slowly and gradually increase your exercise times. If you’ve been sedentary during the past year, it
may be a good idea to keep your exercise times to as little as five minutes initially. Your body will need time to adjust
to the new activity. If your goal is weight loss, a longer exercise session at lower intensities has been found to be most
effective. A workout time of 48 minutes or more is recommended for best weight loss results.
BEFORE
YOU BEGIN
ASSEMBLY
Prior to wearing the wireless chest transmitter on your chest,
MANUAL
moisten the two
rubber electrodes with water. Center the chest
strap just below the breast or pectoral muscles, directly over your
INTERVALS
sternum, with the logo facing out. NOTE: The chest strap must be
tight and properly placed to receive an accurate and consistent
ROLLING
readout. If the
chest strap is too loose, or positioned improperly,
you may receive an erratic or inconsistent heart rate readout.
WEIGHT LOSS
WARNING! The heart rate function is not a medical device. Various
factors may affect the accuracy of your heart rate reading. The
GOLF COURSE
heart rate reading
is intended only as an exercise aid.
HOW OFTEN? (Frequency of Workouts)
HOW HARD? (Intensity of Workouts)
TREADMILL
OPERATION
BACKSIDE OF CHEST TRANSMITTER
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN EXERCISE PROGRAM.
How hard you workout is also determined by your goals. If you use your treadmill to prepare for a 5K run, you will
probably work out at a higher intensity than if your goal is general fitness. Regardless of your long term goals, always
begin an exercise program at low intensity. Aerobic exercise does not have to be painful to be beneficial! There are two
ways to measure your exercise intensity. The first is by monitoring your heart rate (using the grip pulse handlebars or
a wireless chest transmitter - may be sold separately), and the second is by evaluating your perceived exertion level
(this is simpler than it sounds!).
CONDITIONING
GUIDELINES
IMPORTANT
PRECAUTIONS
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your heart
rate to register. It takes 5 consecutive heart beats (15-20 seconds) for your heart rate to register. When gripping
the pulse handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure. Keep a loose,
cupping hold. You may experience an erratic readout if consistently holding the grip pulse handlebars. Make sure
to clean the pulse sensors to ensure proper contact can be maintained.
PERCEIVED EXERTION LEVEL
A simple way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, if you are
too winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb is to work
to the point of exhilaration, not exhaustion. If you cannot catch your breath, it’s time to slow down. Always be aware
of these warning signs of overexertion.
TROUBLESHOOTING
& MAINTENANCE
HANDLEBARS
WIRELESS CHEST TRANSMITTER (Included with 5.2T)
INTRODUCTION
CONDITIONING GUIDELINES
LIMITED
WARRANTY
5. To RESET your program information and delete it from memory, press and hold
the ENTER key for 5 seconds once you have selected the Custom Programs 1 & 2
in the start menu.
6. While using your saved program in the Custom Programs 1 & 2, you are able to
adjust the speed or incline, but any changes will not be saved.
28
Elite 1.2T-5.2T Rev 1.4.indd 28-29
29
LIMITED
WARRANTY
INTRODUCTION
H E A R T R AT E
8/2/05 2:48:00 PM
INTRODUCTION
TA R G E T H E A R T R AT E Z O N E C H A R T
60
%
%
15
12
0
0
BEFORE
YOU BEGIN
TREADMILL
OPERATION
AGE
14
6
14
3
T A 139 1
35
R
13
11
1
7
G
11
E
4
T
11
1
10
8
IMPORTANT
PRECAUTIONS
1. STANDING CALVE MUSCLE STRETCH
12
8
12
4
Z O 120
10
5
NE
10
2
9
9
20
25
30
35
40
45
50
55
97
60
11
6
Stand near a wall with the toes of your left foot about 18" from the wall, and
the right foot about 12" behind the other foot. Lean forward, pushing against
the wall with your palms. Keep your heels flat and hold this position for a
count of 15 seconds. Make sure that you do not bounce while stretching.
Repeat on the other side.
BEFORE
YOU BEGIN
75
ASSEMBLY
0%
93
65
2. STANDING QUADRICEPS STRETCH
Using a wall to provide balance, grasp your left ankle
with your left hand and hold your foot against the back
of your thigh for 15 seconds. Repeat with your right
ankle and hand.
TREADMILL
OPERATION
ASSEMBLY
Target Heart Rate Zone tells you
the number of times per minute
your heart needs to beat to achieve
a desired workout effect. It is
represented as a percentage of the
maximum number of times your
heart can beat per minute. Target
Zone will vary for each individual,
depending on age, current level
of conditioning, and personal
fitness goals. The American Heart
Association recommends workingout at a Target Heart Rate Zone
of between 60% and 75% of your
maximum heart rate. A beginner
will want to workout in the 60%
range while a more experienced
exerciser will want to workout in
the 70-75% range. See chart for
reference.
10
CONDITIONING
GUIDELINES
CONDITIONING
GUIDELINES
What is Target Heart Rate Zone?
Before using your product, it is best to take a few minutes to do a few gentle stretching exercises. Stretching
prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into each of these
stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to bounce while doing
these stretches.
BEATS PER MINUTE
IMPORTANT
PRECAUTIONS
STRETCH FIRST
3. SITTING HAMSTRING & LOWER BACK MUSCLE STRETCH
TROUBLESHOOTING
& MAINTENANCE
For a 42-year-old user: Find age along the bottom of the chart (round to 40), follow age column up to the
target zone bar. Results: 60% of maximum Hear Rate = 108 Beats Per Minute, 75% of maximum Heart
Rate = 135 Beat Per Minute.
Sit on the floor with your legs together and straight out in front of you. Do
not lock your knees. Extend your fingers towards your toes and hold for a
count of 15 seconds. Make sure that you do not bounce while stretching. Sit
upright again. Repeat one time.
TROUBLESHOOTING
& MAINTENANCE
EXAMPLE:
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN EXERCISE PROGRAM.
LIMITED
WARRANTY
30
Elite 1.2T-5.2T Rev 1.4.indd 30-31
31
LIMITED
WARRANTY
INTRODUCTION
STRETCHING
8/2/05 2:48:01 PM
WEEK #
The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your
muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your product at a
slow pace. The warm up should gradually bring your heart rate into your Target Heart Rate Zone.
D AY
INTRODUCTION
WEEKLY GOAL
D AT E
D I S TA N C E
CALORIES
TIME
COMMENTS
SUNDAY
MONDAY
TUESDAY
COOL DOWN
ASSEMBLY
Never stop exercising suddenly! A cool-down period of 3-5 minutes allows your heart to readjust to the
decreased demand. Make sure that your cool down period consists of a very slow pace to allow your heart
rate to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your
muscles.
WEDNESDAY
THURSDAY
ASSEMBLY
IMPORTANT
PRECAUTIONS
WARM UP
TIPS
WEEKLY LOG SHEETS
IMPORTANT
PRECAUTIONS
THE IMPORTANCE OF WARM UP & COOL DOWN
FRIDAY
SATURDAY
WEEKLY TOTALS :
ACHIEVING YOUR FITNESS GOALS
BEFORE
YOU BEGIN
An important step in developing a long term fitness program is to determine your goals. Is your primary goal for
exercising to lose weight? Improve muscle? Reduce stress? Prepare for the spring racing schedule? Knowing
what your goals are will help you develop a more successful exercise program. Below are some common exercise
goals:
WEEK #
D AY
BEFORE
YOU BEGIN
INTRODUCTION
TIPS
WEEKLY GOAL
D AT E
D I S TA N C E
CALORIES
TIME
COMMENTS
SUNDAY
MONDAY
THURSDAY
FRIDAY
SATURDAY
WEEKLY TOTALS :
WEEK #
D AY
CONDITIONING
GUIDELINES
CONDITIONING
GUIDELINES
If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing. The
more specific you can be, the easier it will be to track your progress. If your goals are long term, divide them up
into monthly and weekly segments. Longer term goals can lose some of the immediate motivation benefits. Short
term goals are easier to achieve. Your console provides you with several readouts that can be used to record your
progress. You can track Distance, Calories or Time.
WEDNESDAY
WEEKLY GOAL
D AT E
D I S TA N C E
CALORIES
TIME
COMMENTS
KEEPING AN EXERCISE DIARY
To make your personal exercise log book, photocopy the weekly and monthly log sheets, which are located on the
following pages, or you can print them off of your computer by going to:
TROUBLESHOOTING
& MAINTENANCE
TROUBLESHOOTING
& MAINTENANCE
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
LIMITED
WARRANTY
www.horizonfitness.com/guides/weeklylog.pdf
www.horizonfitness.com/guides/monthlylog.pdf
FRIDAY
SATURDAY
WEEKLY TOTALS :
As your fitness improves, you can look back and see how far you’ve come!
32
Elite 1.2T-5.2T Rev 1.4.indd 32-33
33
LIMITED
WARRANTY
TREADMILL
OPERATION
• Weight Loss - lower intensity, longer duration workouts
• Improve Body Shape and Tone - interval workouts, alternate between hi and low intensities
• Increased Energy Level - more frequent daily workouts
• Improved Sports Performance - high intensity workouts
• Improved Cardiovascular Endurance - moderate intensity, longer duration workouts
TREADMILL
OPERATION
TUESDAY
8/2/05 2:48:02 PM
IMPORTANT
PRECAUTIONS
MONTH
WEEK #
DI STANCE
INTRODUCTION
TROUBLESHOOTING
MONTHLY GOAL
CALORIES
COMMON PRODUCT QUESTIONS
TIME
ARE THE SOUNDS MY TREADMILL MAKES NORMAL?
IMPORTANT
PRECAUTIONS
INTRODUCTION
M O N T H LY L O G SHEETS
All treadmills make a certain type of thumping noise due to the belt riding over the rollers, especially
new treadmills. This noise will diminish over time, although may not totally go away. Over time, the
belt will stretch, causing the belt to ride smoother over the rollers.
WHY IS THE TREADMILL I PURCHASED LOUDER THAN THE ONE AT THE STORE?
M O N T H LY T O TA L S :
ASSEMBLY
ASSEMBLY
All fitness products seem quieter in a large store showroom because there is generally more
background noise than in your home. Also, there will be less reverberation on a carpeted concrete
floor than on a wood overlay floor. Sometimes a heavy rubber mat will help reduce reverberation
through the floor. If a fitness product is placed close to a wall, there will be more reflected noise.
WHEN SHOULD I BE WORRIED ABOUT A NOISE?
As long as the sounds your treadmill makes are no louder than a normal conversational tone of voice,
it is considered normal noise.
TIME
BEFORE
YOU BEGIN
TROUBLESHOOTING - TREADMILL
Your treadmill is designed to be reliable and easy to use. However, if you experience a problem, please
reference the troubleshooting guide listed below.
L IF T
TREADMILL
OPERATION
PROBLEM: (1.2T ONLY) The banding
straps were removed before ASSEMBLY
STEP 1 was complete and the machine has
sprung open and cannot be assembled.
TREADMILL
OPERATION
DI STANCE
MONTHLY GOAL
CALORIES
SOLUTION: The air shocks have been engaged prematurely. To correct this, tilt the machine on it’s nose by lifting
CONDITIONING
GUIDELINES
CONDITIONING
GUIDELINES
the deck (light end) upwards. Step on the foot latch and fold down the deck so that it is horizontal. You may now
proceed with ASSEMBLY STEP 1.
M O N T H LY T O TA L S :
PROBLEM: The console does not light up.
SOLUTION: Verify the following:
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
M O N T H LY T O TA L S :
34
Elite 1.2T-5.2T Rev 1.4.indd 34-35
DI STANCE
MONTHLY GOAL
CALORIES
TIME
DOES THE RED LIGHT ON THE ON/OFF SWITCH LIGHT UP?
IF YES:
• Double check that all connections are secure, especially the console cable. Unplug and reconnect
the console cable to verify.
• Make sure the console cable is not pinched or damaged in any way.
• 2.2T - 5.2T: Raise elevation to 6% incline.
• Turn the power off and wait 60 seconds. Remove motor cover. Wait until all red LED lights have gone off
on the motor control board before proceeding. Next, verify that no wires are loose or disconnected.
IF NO:
• Verify that the outlet the machine is plugged into is functional. Double check that the breaker has not
tripped, it is on a dedicated 20-amp circuit, it is not on a GFCI equipped outlet, and it is not plugged
into a surge protector or extension cord.
• The power cord is not pinched or damaged and is properly plugged into the outlet AND the machine.
• The power switch is turned to the ON position.
TROUBLESHOOTING
& MAINTENANCE
MONTH
WEEK #
35
LIMITED
WARRANTY
BEFORE
YOU BEGIN
MONTH
WEEK #
8/2/05 2:48:03 PM
BEFORE
YOU BEGIN
Check your exercise environment for sources of interference such as fluorescent lights, computers, or appliances containing
large motors. These items may cause erratic heart rate readouts.
TREADMILL
OPERATION
You may experience an erratic readout under the following conditions:
• Gripping the heart rate handlebars too tight. Try to maintain moderate pressure while holding onto the heart rate
handlebars.
• Constant movement and vibration due to constantly holding the heart rate handlebars while exercising. If you are
receiving erratic heart rate readouts, try to only hold the grips long enough to monitor your heart rate.
• When you are breathing heavily during a workout.
• When your hands are constricted by wearing a ring.
• When your hands are dry or cold. Try to moisten your palms by rubbing them together to warm.
• Anyone with heavy arrhythmia.
• Anyone with arteriosclerosis or peripheral circulation disorder.
• Anyone whose skin on the measuring palm is especially thick.
CONDITIONING
GUIDELINES
If the above troubleshooting section does not remedy the problem, discontinue use and turn the power off.
PLEASE CALL CUSTOMER TECH SUPPORT AT THE NUMBER ON THE BACK PANEL.
TROUBLESHOOTING
& MAINTENANCE
The following information may be asked of you when you call. Please have these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
In order for Customer Tech Support to service your treadmill they may need to ask detailed questions about the symptoms
that are occurring. Some troubleshooting questions that may be asked are:
• How long has this problem been occurring?
• Does this problem occur with every use? With every user?
• If you are hearing a noise, does it come from the front or the back? What kind of noise is it (thumping, grinding,
squeaking, chirping etc.)?
• Has the machine been lubricated and maintained per the maintenance schedule?
LIMITED
WARRANTY
Answering these and other questions will give the technicians the ability to send proper replacement parts and the service
necessary to get you and your Horizon Fitness treadmill running again!
36
Elite 1.2T-5.2T Rev 1.4.indd 36-37
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
EVERY WEEK
Clean underneath the treadmill, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Fold the treadmill into the upright position, making sure that the lock latch is secure.
• Move the treadmill to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the treadmill.
• Return the treadmill to its previous position.
BEFORE
YOU BEGIN
TROUBLESHOOTING - HEART RATE
Clean and inspect, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never use solvents,
as they can cause damage to the treadmill.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the treadmill or in any other area where it can become
pinched or cut.
• Check the tension and alignment of the running belt. Make sure that the treadmill belt will not damage
any other components on the treadmill by being misaligned.
TREADMILL
OPERATION
ASSEMBLY
PROBLEM: The running belt does not stay centered during a workout.
SOLUTION: Verify the following:
• Make sure the treadmill is on a level surface.
• Verify that the belt is properly tightened and centered (Refer to the Adjustment section for detailed
directions).
AFTER EACH USE (DAILY)
EVERY MONTH - IMPORTANT!
•
•
•
•
•
Inspect all assembly bolts of the machine for proper tightness.
2.2T-5.2T: Raise the elevation to 6% incline.
Turn off the treadmill with the on/off switch, then unplug the power cord and wait 60 seconds.
Remove the motor cover. Wait until ALL LED lights turn off.
Clean the motor and lower board area to eliminate any lint or dust particles that may have accumulated.
Failure to do so may result in premature failure of key electrical components.
CONDITIONING
GUIDELINES
PROBLEM: The treadmill shuts off when elevating.
SOLUTION: Verify the following:
• Make sure there is enough slack in the power cord to reach to the wall during elevation
• Verify that the console cable is not pinched between the handlebars and console mast.
• Turn the power off and wait 60 seconds. Remove motor cover. Wait until all red LED lights have gone off on the motor
control board before proceeding. Next, verify that no wires are loose or disconnected.
Cleanliness of your treadmill and its operation environment will keep maintenance problems and service calls to
a minimum. For this reason, we recommend that the following preventive maintenance schedule be followed.
EVERY 6 MONTHS
It may be necessary to lubricate your treadmill running deck every six months to maintain optimal performance
of your treadmill. Only use lubricant provided by Horizon Fitness! Please contact Horizon Fitness with questions
about applying lubricant to your treadmill.
TROUBLESHOOTING
& MAINTENANCE
IMPORTANT
PRECAUTIONS
• Confirm that the machine is not plugged into a GFCI-equipped outlet or on a circuit that has a GFCI-equipped outlet
on it.
MAINTENANCE
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Loosen both the rear roller bolts. (For best results, place two removable marks on both sides of the
frame and note roller position). Once the belt is loosened, take the bottle of lubricant and apply it to the
entire top surface of the running deck. Tighten both rear roller bolts (matching up the marks for proper
position) to original position. After you have applied lubricant, plug in the power cord, insert the safety
key, start the treadmill and walk on the belt for two minutes to spread the lubricant.
• Lubricate the air shocks with Teflon based spray.
37
LIMITED
WARRANTY
INTRODUCTION
PROBLEM: The treadmill circuit breaker trips during a workout.
SOLUTION: Verify the following:
• Make sure the treadmill is plugged into a dedicated 20-amp circuit.
• Verify that you do not have the machine on an extension cord or surge protector.
8/2/05 2:48:03 PM
INTRODUCTION
L I M I T E D H OME USE WARRANTY
FRAME • LIFETIME
Horizon Fitness warrants the frame against defects in workmanship and materials for the lifetime of the original owner.
IMPORTANT
PRECAUTIONS
DRIVE MOTOR/ELEVATION • 25 YEARS
Horizon Fitness warrants the drive/elevation motors against defects in workmanship and materials for a period of twenty-five years from
the date of purchase, so long as the device remains in the possession of the original owner.
ELECTRONICS & PARTS • 1.2T / 2.2T - 2 YEARS • 3.2T / 4.2T / 5.2T - 5 YEARS*
Horizon Fitness warrants the electronic components, finish and all original parts for a period of two years from the date of original
purchase, so long as the device remains in the possession of the original owner.
ASSEMBLY
* To be eligible for the extended warranty (3.2T, 4.2T, 5.2T only), you must register your treadmill within 30 days of purchase. Upon
registration, Horizon Fitness will automatically extend the parts and electronics warranty on these models from two to FIVE years – a
three-year extension. This extended warranty is limited to those items listed below, and excludes replacement of the tread belt, front and
rear rollers and running deck.
LABOR • 1 YEAR
Horizon Fitness shall cover the labor cost for the repair of the device for a period of one year from the date of the original purchase, so
long as the device remains in the possession of the original owner.
BEFORE
YOU BEGIN
EXCLUSIONS AND LIMITATIONS
Who IS covered:
• The original owner and is not transferable.
What IS covered:
• Repair or replacement of a defective motor, electronic component, or defective part and is the sole remedy of the warranty.
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
What IS NOT covered:
• Normal wear and tear, improper assembly or maintenance, or installation of parts
or accessories not originally intended or compatible with the equipment as sold.
• Damage or failure due to accident, abuse, corrosion, discoloration of paint or
plastic, neglect, theft, vandalism, fire, flood, wind, lightning, freezing, or other
natural disasters of any kind, power reduction, fluctuation or failure from whatever
cause, unusual atmospheric conditions, collision, introduction of foreign objects
into the covered unit, or modifications that are unauthorized or not recommended
by Horizon Fitness.
• Incidental or consequential damages. Horizon Fitness is not responsible or liable
for indirect, special or consequential damages, economic loss, loss of property, or
profits, loss of enjoyment or use, or other consequential damages of whatsoever
nature in connection with the purchase, use, repair or maintenance of the
equipment.
• Equipment used for commercial purposes or any use other than a single family or
Household, unless endorsed by Horizon Fitness for coverage.
• Equipment owned or operated outside the US and Canada.
• Delivery, assembly, installation, setup for original or replacement units or labor or
other costs associated with removal or replacement of the covered unit.
• Any attempt to repair this equipment creates a risk of injury. Horizon Fitness is
not responsible or liable for any damage, loss or liability arising from any personal
injury incurred during the course of, or as a result of any repair or attempted
repair of your fitness equipment by other than an authorized service technician.
All repairs attempted by you on your fitness equipment are undertaken AT YOUR
OWN RISK and Horizon Fitness shall have no liability for any injury to the person or
property arising from such repairs.
SERVICE/RETURNS
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
• In-home service is available within 150
miles of the nearest authorized repair
center (Mileage beyond 150 miles from an
authorized service center is the responsibility
of the consumer).
• All returns must be pre-authorized by
Horizon Fitness.
• Horizon Fitness’ obligation under this
warranty is limited to replacing or repairing,
at Horizon Fitness’ option, the equipment at
one of its authorized service centers.
• A Horizon Fitness authorized service center
must receive all equipment for which a
warranty claim is made. This equipment
must be received with all freight and
other transportation charges prepaid,
accompanied by sufficient proof of purchase.
• Parts and electronic components
reconditioned to As New Condition by Horizon
Fitness or its vendors may sometimes be
supplied as warranty replacement parts and
constitute fulfillment of warranty terms.
• This warranty gives you specific legal rights,
and your rights may vary from state to state.
38
Elite 1.2T-5.2T Rev 1.4.indd 38-39
8/2/05 2:48:04 PM
C U S T O MER TECH SUPPORT
If you have any questions or comments, you may contact one of our
trained customer technicians via phone, email or our website.
Customer Tech Support Hotline: 1 - 8 0 0 - 2 4 4 - 4 1 9 2
Email: comments@horizonfitness.com
Website: www.horizonfitness.com
Customer Tech Support hours: Monday - Friday, 8 am - 5 pm CST (excluding holidays)
NOTE: Please read the TROUBLESHOOTING section before contacting Customer Tech Support.
800 Burton Blvd
DeForest, WI 53532
Tel: 1.800.244.4192
Fax: 608.842.1660
Elite 1.2T - 5.2T. Rev. 1.4 2005 Horizon Fitness Products | Designed & Engineered in the U.S.A. | Made in China
Elite 1.2T-5.2T Rev 1.4.indd 40
8/2/05 2:48:04 PM
Download PDF

advertising