Fusion CE-99200 Automobile Alarm User Manual

INSTALLATION MANUAL
VEHICLE SECURITY SYSTEM
CE-SS200
FUSION CULTURE
TABLE OF CONTENTS
• PROGRAMMING REMOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 4
There’s no point doing something if no one notices. We’ve always
believed the way to make things happen is by getting noticed. From
• ALARM FEATURES PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . pg 5
our product, to our demo cars, to our events, FUSION is about
• ADJUSTING THE SENSITIVITY LEVEL . . . . . . . . . . . . . . . . . . . . . . . . . pg 8
making some noise.
• WIRING DIAGRAMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 9
Now you are ready. Step out of the shadows and announce you’ve
• CENTRAL LOCKING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 11
arrived in a world where the old limits are left behind. Where
• SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 15
technology is creatively combined with the latest in product
innovation. Where new levels of entertainment are delivered with
outstanding performance and quality. Our development team create
distinctively different products; subwoofers, amplifiers, speakers and
peripherals that redefine what can be done in car audio.
Leave the old behind and push the limits of what can be achieved in
car audio. Make some noise.
For more information about FUSION Electronics visit our website at
www.fusionelectronics.com
or email technical@fusionelectronics.co.nz
RECORD YOUR PRODUCT DETAILS HERE:
PROFESSIONAL INSTALLATION STONGLY RECOMMENDED
Installation Precautions:
MODEL NUMBER _______________________________ DATE OF PURCHASE________________
AFFIX RECEIPT HERE
1. Roll down window to avoid locking keys in vehicle during installation
2. Avoid mounting components or routing wires near hot surfaces
3. Avoid mounting components or routing wires near moving parts
4. Tape or loom wires under hood for protection and appearance
5. Use grommets when routing wires through metal surfaces
6. Use a voltmeter for testing and verifying circuits
V 2.0
2
3
PROGRAMMING REMOTES
ALARM FEATURES PROGRAMMING:
ALARM FEATURE “I” PROGRAMMING:
1. Turn the ignition switch ‘OFF/ON’ 3 times (within 15 seconds)
and leave in the ON position.
2. Push the valet switch 3 times, and hold on the 3rd push until a long
chirp is heard from the siren, and then release the valet switch. You
are now in the remote programming mode.
3. Press and hold any button of the remote until the siren responds
with a confirming chirp, this indicates the remote has been stored
into memory.
1. Turn the ignition ‘switch ‘ON/OFF’ 3 times (within 15 seconds)
and leave in the OFF position on the 3rd time.
2. Push the valet switch twice, and hold on the 2nd push until one
short chirp, followed by one long chirp is heard then release the valet
switch. You are now in the alarm feature ‘I’ programming mode.
3. A; Press and release the remote button corresponding to the
feature ‘1’ to be changed.
The siren will chirp and the LED will indicate the new setting
4. If you have additional remotes (up to 4 in total) that need to be
programmed, repeat step 3 for each remote.
B; Press and release the remote button corresponding to the
feature ‘2’ to be changed.
The siren will chirp and the LED will indicate the new setting
Exit Programming: Turn ignition to ‘OFF’ position, or wait for 15
seconds. Three long chirps and three indicator light flashes will
confirm exit.
Note: This mode will only retain the last 4 remote transmitters
programmed. If the remote memory is exceeded, the security system will
start deleting remote’s from memory in chronological order.
C; Press and release the remote buttons + corresponding to
the feature ‘3’ to be changed.
The siren will chirp and the LED will indicate the new setting
Note: The factory default setting is always [1] LED flash, [1] chirp.
Press remote
button
One Chirp / LED one
flash
Factory Default
Setting
Two Chirps / LED two
flashes
1
Chirps on
Chirps off
2
Automatic Rearm On
Automatic Rearm Off
Instant Door Ajar
Warning
45 second Delay Door
Ajar warning
3
+
Exit Programming: Turn ignition to ‘ON’ position, or wait 15 seconds.
Three long chirps will confirm exit.
4
5
ALARM FEATURE “II” PROGRAMMING:
ALARM FEATURE “III” PROGRAMMING:
1. Turn the Ignition ‘switch ‘ON/OFF’ 3 times (within 15 seconds),
and leave in the OFF position.
1. Turn the ignition ‘switch ‘ON/OFF’ 3 times (within 15 seconds),
and leave in the OFF position.
2. Push the valet switch 4 times and hold on the 4th push until two short
chirps and one long chirp is heard, and then release the valet switch.
You are now in the alarm feature ‘II’ programming mode.
2. Push the valet switch 6 times and hold on the 6th push until three
short chirps and one long chirp is heard, and then release the valet
switch. You are now in the Alarm feature ‘III’ programming mode.
3. A; Press and release the remote button
feature ‘1’ to be changed.
corresponding to the
The siren will chirp and the LED will indicate the new setting.
B; Press and release the remote button
feature ‘2’ to be changed.
3. A; Press and release the remote button corresponding to the
feature ‘1’ to be changed.
The siren will chirp and the LED will indicate the new setting.
corresponding to the
B; Press and release the remote button corresponding
to the feature ‘2’ to be changed.
The siren will chirp and the LED will indicate the new setting.
The siren will chirp and the LED will indicate the new setting.
C; Press and release the remote buttons
the feature ‘3’ to be changed.
+
C; Press and release the remote buttons + corresponding to
the feature ‘3’ to be changed.
The siren will chirp and the LED will indicate the new setting.
corresponding to
The siren will chirp and the LED will indicate the new setting.
Note: The factory default setting is always [1] LED flash, [1] chirp.
Note: The factory default setting is always [1] LED flash, [1] chirp.
Press
remote
button
One Chirp /
LED one flash
Factory
Default Setting
Two Chirps /
LED two flashes
Three Chirps /
LED three flashes
Press remote
button
1
0.9 - second
door lock
pulses
3.0 - second
door lock pulse
double pulse
unlock
1
2
Active arming
Passive arming
without passive
door locking
Passive arming
with passive door
locking
Ignition
controlled door
locks & unlocks
Without ignition
controlled door
locks & unlocks
3
+
Two Chirps / LED
two flashes
Shock sensor
program mode
2
3
One Chirp / LED one
flash
Factory Default
Setting
+
Red/white wire =
trunk/boot (Channel
3) output
Red/white wire =
two step door unlock
output
Anti car jacking off
Anti car jacking on
Exit Programming: Turn Ignition to ‘ON’ position, or wait for 15
seconds. Three long chirps will confirm exit.
Exit Programming: Turn ignition to ‘ON’ position, or wait for
15 seconds. Three long chirps will confirm exit.
6
7
ADJUSTING THE SENSITIVITY LEVEL OF THE SHOCK SENSOR
1. Turn the ignition ‘switch ‘ON/OFF’ 3 times (within 15 seconds) and
leave in the OFF position.
2. Push the valet switch 6 times and hold on the 6th push until three
short chirps and one long chirp is heard, and then release the valet
switch. You are now in the alarm feature ‘Shock Sensor’
programming mode.
3. Press and hold button for 2 seconds. One long siren chirp will
indicate the unit is ready to accept adjustments of the second stage
of the shock sensor (full alarm).
4. Pressing the button on the remote once will decrease the sensitivity
level by one, each time a decrease is made the siren will respond
with one chirp, while 2 chirp’s indicates the minimum sensitivity
setting.
5. Pressing button on the remote once will increase sensitivity level by
one, each time an increase is made the siren will respond with
one chirp, while 2 chirp’s indicates the maximum sensitivity setting.
6. Hit the bumper or strong metal part of the vehicle to test the
threshold level of the sensor.
a). Activate the warn-away (first stage of the shock sensor), the siren
will emit a short chirp.
b). Activate the full alarm (second stage of the shock sensor), the
siren will emit a long chirp.
7. When you are satisfied with the second stage of the shock sensor
settings, press and hold and buttons simultaneously for
2 seconds. Two long siren chirps will indicate the unit is ready
to accept adjustments of the first stage of the shock
sensor (warn-away).
8. Follow the steps 4, 5 and 6 to adjust the warn-away sensitivity.
9. When you are satisfied with the setting, press and buttons
simultaneously. One long siren chirp indicates the unit has confirmed
the setting.
WIRING DIAGRAM
6 Pin
White
Black Antenna Wire
Valet Switch
2 Pin
Blue
6 Pin Mini Connector
2 Pin
White
6 Pin
White
LED Indicator
6 Pin Door Lock/Unlock
Wire harness
6 Pin
White
Main 6 Pin Wire harness
A: MAIN 6 PIN WIRE HARNESS:
1. White Wire: Turn Indicator Relay Output
Turn Indicator
10A Fuse
2. Red / Blue Wire: Turn Indicator Relay Power input
3. White Wire: Turn Indicator Relay Output
4. Black Wire: Ground to Vehicle FRAME
5. Brown Wire: Positive output To Siren
3A Fuse
6. Red Wire: +12V To Constant Battery Source
Note: If 20 seconds of inactivity expire, or the ignition is turned on during
the above steps, the unit will exit the programing mode and return to the
disarmed mode. Three long chirps will confirm exit.
8
9
A: CENTRAL LOCKING DIAGRAMS
B: 6 PIN MINI CONNECTOR WIRE HARNESS:
(After market Door Motors)
INSTALLING DOOR LOCK MOTORS (2 WIRE)
Green/ white
12V
Blue/ white
1. Violet Wire: Positive Door Pin Switch Input
Blue/ red
2. Blue Wire: Instant Trigger Ground Input
Green/ red
3. Green Wire: Negative Door Pin Switch Input
12V
From ignition switch
5. Orange Wire: 200mA Grounded when armed
6. Red/White Wire: (-) 200mA Programmable Output
Channel 3 / 2 Step Door Unlock.
Blue/ yellow
Green/ yellow
4. Yellow Wire: To Ignition Switched + 12V
Red wire
Cut
30
To start solenoid
White wire
Yellow wire
85 87a 86
+12V
Orange
wire
INSTALLING 4 DOOR LOCK MOTORS (WITH 5-WIRE LOCK MOTOR)
B lu e / re d
G re e n / re d
G re e n / w h ite
B lu e / w h ite
B lu e / y e llo w
G re e n / y e llo w
T o D oor
U n lo c k C o n tro l
W ire
+12V
C: 6PIN DOOR LOCK/UNLOCK WIRE HARNESS:
T o D oor
L o c k C o n tro l
W ire
(See central locking diagrams)
Blue/Red W ire: (87a) - Door Unlock Relay
B: CENTRAL LOCKING DIAGRAMS
Blue/White W ire: (30) - Door Unlock Relay
(Factory Door Locking System)
Blue/Yellow W ire: (87) - Door Unlock Relay
NEGATIVE TRIGGER DOOR LOCK SYSTEM
Green/Red W ire: (87a) - Door Lock Relay
Green / white
Green/White W ire: (30) - Door Lock Relay
Blue / white
M aster
Locking
Switch
Green/Yellow W ire: (87) - Door Lock Relay
Door Lock Door unlock
Green / yellow
Blue / yellow
10
11
POSITIVE TRIGGER DOOR LOCK SYSTEM
2 STEP DOOR UNLOCK WIRE CONNECTIONS FOR 5 WIRE
ALTERNATING DOOR LOCKS
+ 12V
M aster
Locking
Switch
Green / white
Blue / white
Door Lock
+ 12V
87A
85
30
Door unlock
Green / yellow
OEM Door Master Lock
87
86
Red / White
+ 12V
+12V
Unlock
Lock
x
Cut the Unlock Wire
Blue / yellow
Green / Red
x
Green / White
6-Pin
Door
Lock
Wire
Harness
ALTERNATING DOOR LOCKS
Green/ white
Blue/ red
Blue/ yellow
Blue / Red
OEM Slave
Door Lock
Switch
Unlock
OEM Driver's
Door Lock
Motor
X
X
+ 12V
To Slave Door
Lock switches
Cut the
Existing
Lock Wire
To Door
Lock
Lock
+12V
Splice
Blue/ white
Green/ yellow
Blue / Yellow
+12V
Cut the Existing
Unlock Wire
Splice
X
To All Other
Door Lock
Motors
Cut Existing Unlock Wire
2 STEP DOOR UNLOCK WIRE CONNECTIONS FOR GROUND SWITCHED
DOOR LOCKS
OEM Door Master Lock Switch
Red / White
Unlock
VACUUM OPERATED DOOR LOCKING SYSTEM
Green/ yellow
Existing
Lock Wire
Blue / Red
Blue/ red
Blue/ white
Lock
Existing
Unlock Wire
Green/ white
Green/ red
Door Switch
Cut X
+12V
Compressor
6-Pin
Door
Lock
Wire
Harness
Blue / White
Green / White
Green / Yellow
Blue / Yellow
+12V
OEM Door
Lock Relay
Blue/ yellow
OEM
Door Lock
Motor
X
Cut Existing Unlock Wire
12
Cut the Existing
Lock Wire
+ 12V
Blue / White
Master Door
Lock Switch
Green/ red
Green / Yellow
To All Other
Door Lock
Motor
13
2 STEP DOOR UNLOCK WIRE CONNECTIONS FOR POSITIVE SWITCHED
DOOR LOCKS
+12V
87
Unlock
86
6-Pin
Door
Lock
Wire
Harness
Power supply:
Operating temperature:
TX Frequency:
OEM Door Master Lock
Red / White
87A
30
Lock
Existing Pos.
Unlock Wire
+ 12V
Existing Pos.
Lock Wire
POWER CONSUMPTION:
Indicator light flash output:
Door Lock:
Door Unlock:
Security system (disarmed):
Blue / White
Green / White
Green / Yellow
15 Amp
10 Amp
10 Amp
15 mA
+ 12V
OEM Door
Lock Relay
OEM Driver's
Door Lock
Motor
10 VDC – 16 VDC
-40 °C – +80 °C (-40 °F – +176 °F )
433.92 M Hz
85
Blue / Red
Blue / Yellow
SPECIFICATIONS:
X
Cut Existing Unlock
Note: Remote control range is dependant on weather conditions and
alarm installation.
To All Other
Door Lock
Motors
THE FUSION CE-SS200 SECURITY SYSTEM COMPLIES WITH:
FCC:
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions.
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Z105
YOU CAN HELP PROTECT THE ENVIRONMENT!
PUBLISHED BY FUSION ELECTRONICS LIMITED:
Please remember to respect the local regulations:
© Copyright 2007 by FUSION Electronics Limited.
Hand in the non-working electrical equipment
to an appropriate waste disposal center.
14
All rights reserved. Specifications and design are
subject to change without notice.
15
• • Specifications and design are subject to change without notice • •