Owner`s manual | Garmin 885 GPS Receiver User Manual

dēzl 560
®
owner’s manual
© 2011 Garmin Ltd. or its subsidiaries
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced,
copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without
the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy
of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of
this manual or of any revision hereto, provided that such electronic or printed copy of this manual must
contain the complete text of this copyright notice and provided further that any unauthorized commercial
distribution of this manual or any revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Garmin reserves the right to change
or improve its products and to make changes in the content without obligation to notify any person
or organization of such changes or improvements. Go to the Garmin Web site (www.garmin.com) for
current updates and supplemental information concerning the use and operation of this and other Garmin
products.
Garmin®, the Garmin logo, and MapSource® are trademarks of Garmin Ltd. or its subsidiaries, registered
in the USA and other countries. cityXplorer™, dēzl™, ecoRoute™, Garmin Lock™, myGarmin™, myGarmin
Agent™, myTrends™, nüMaps Guarantee™, nüMaps Lifetime, nüRoute™, and trafficTrends™ are
trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express
permission of Garmin.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by
Garmin is under license. Mac® is a trademark of Apple Computer, Inc., registered in the U.S. and other
countries. microSD™ is a trademark of SD-3C, LLC. Windows® is a registered trademark of Microsoft
Corporation in the United States and other countries.
Table of Contents
Table of Contents
Getting Started..................... 1
Mounting the Device................... 1
About myDashboard................... 6
Entering a Truck or RV Profile.... 7
Acquiring Satellites..................... 7
Device Overview........................ 8
Adjusting the Screen
Brightness................................ 8
Resetting the Device.................. 8
Adjusting the Volume.................. 9
Using the Main Menu................. 9
Using the On-screen
Buttons................................... 10
Using the On-screen
Keyboard................................ 10
Transportation Modes................11
Using a Backup Camera...........11
Searching for a Location.. 12
Finding an Address................... 12
Using the Location Map............ 12
dēzl 560 Owner’s Manual
Finding a Location Using
the Map.................................. 13
Finding NTTS Services............ 13
Using Exit Services.................. 14
Finding Trucking Points of
Interest................................... 14
Setting a Home Location.......... 14
About Points of Interest............ 15
Finding Your Last Parking
Spot........................................ 17
Viewing a List of Recently
Found Locations.................... 17
Favorites................................... 17
Entering Coordinates................ 19
Changing the Search Area....... 19
Planning a Trip................... 20
Scheduling a Trip...................... 20
Navigating a Saved Trip........... 21
Editing a Saved Trip................. 21
Setting a Simulated Location.... 21
Simulating a Route................... 21
i
Table of Contents
Navigation.......................... 22
Map Features While
Navigating.............................. 22
Using the Navigation Map........ 23
Viewing Trip Information .......... 24
Viewing the Turn List ............... 25
Viewing the Next Turn.............. 25
Viewing the Junction View........ 26
Selecting a Route
Calculation Mode................... 26
Adding One Point to the
Active Route........................... 26
Taking a Detour........................ 27
Stopping the Route................... 27
About myTrends™..................... 28
Using the Pedestrian
Navigation Map...................... 28
Traffic.................................. 30
Subscription Activation............. 30
Traffic Receiver........................ 30
Receiving Traffic Information.... 31
About the Traffic Icon............... 31
ii
Traffic on Your Route................ 32
Viewing the Traffic Map............ 32
Searching for Traffic Delays..... 33
Adding a Subscription.............. 33
About Offers and
Advertisements...................... 34
Using Trucking Features.. 35
About IFTA Logging.................. 35
About Hours of Service............ 38
Using the Tools.................. 43
Viewing Current Location
Information............................. 43
Using Help................................ 43
About ecoRoute™..................... 43
Using the Picture Viewer.......... 47
Using the World Clock ............. 48
Using the Calculator................. 48
Capturing Screenshots............. 48
Using the Unit Converter ......... 48
Hands-Free Phone Calls... 50
About Pairing the Devices........ 50
dēzl 560 Owner’s Manual
Table of Contents
Receiving a Call ...................... 52
Using the Device During
a Call . ................................... 52
Dialing a Point of Interest......... 53
Dialing a Number...................... 53
Entering Your Phone
Number.................................. 53
Placing Calls Using Voice
Dial......................................... 54
Checking the Phone Status...... 54
Pedestrian Navigation
Settings.................................. 63
Choosing Route
Preferences............................ 63
Display Settings........................ 66
Language Settings................... 66
Viewing Map Information ......... 67
Bluetooth Settings.................... 67
Enabling Traffic......................... 67
Restoring Settings.................... 67
Data Management.............. 55
Appendix............................ 68
File Types................................. 55
About Memory Cards............... 55
Transferring Files To Your
Computer .............................. 56
Deleting Files . ......................... 57
Customizing the Device.... 58
System Settings....................... 58
Customizing the Main Menu..... 58
Adding Truck or RV Profiles..... 60
Automobile, Truck, and RV
Navigation Settings................ 61
dēzl 560 Owner’s Manual
Warning Icons........................... 68
Power Cables........................... 69
Caring for Your Device............. 70
About Garmin Lock................... 71
Erasing User Data.................... 72
Battery Information .................. 72
Changing the Fuse in the
Vehicle Power Cable.............. 73
Removing the Device, Cradle,
and Mount.............................. 74
About nüMaps Lifetime™ ......... 75
iii
Table of Contents
Device Models.......................... 75
Purchasing Additional Maps..... 75
Custom Points of Interest......... 75
Safety Cameras........................ 76
Purchasing Accessories........... 77
Contacting Garmin Product
Support.................................. 77
Specifications........................... 77
Troubleshooting........................ 78
Index................................... 80
iv
dēzl 560 Owner’s Manual
Getting Started
Getting Started
 WARNING
See the Important Safety and Product
Information guide in the product
box for product warnings and other
important information.
Before you use your device for the
first time, you should complete these
tasks.
1. Mount the device (page 1):
• Portable friction mount
(page 2).
• Dash mount (page 3).
• External antenna (page 5).
2. Register the device (page 6).
3. Check for updates:
• Software updates (page 6).
• Free map update (page 7).
dēzl 560 Owner’s Manual
4. Enter a truck or RV profile
(page 7).
5. Acquire satellites (page 7).
Mounting the Device
 WARNING
This product contains a lithium-ion
battery. To prevent the possibility of
personal injury or product damage
caused by battery exposure to
extreme heat, remove the device from
the vehicle when exiting or store it
out of direct sunlight.
Before you use your device on
battery power, you should charge it.
The dēzl comes with either a portable
friction mount or an adhesive dash
mount.
1
Getting Started
Installing the Portable
Friction Mount
If you are using a portable friction
mount, you should follow these
instructions.
1. Plug the vehicle power cable ➊
into the mini-USB connector ➋
on the cradle ➌.
3. Slide the locking lever ➎ on the
base to the unlocked position.
➎
➌
➊
➋
➍
2. Snap the cradle onto the arm ➍.
2
4. Slide the disk on the bottom
of the arm into the base until it
clicks.
5. Slide the locking lever to the
locked position.
6. Fit the bottom of the device into
the cradle.
dēzl 560 Owner’s Manual
Getting Started
7. Tilt the device ➏ back until it
snaps.
➏
8. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
Installing the Dash Mount
If you are using an adhesive dash
mount, you should follow these
instructions.
dēzl 560 Owner’s Manual
Installing the Base
NOTICE
The adhesive pad is permanent and
is very difficult to remove after it is
installed. If you move the adhesive
pad, use rubbing alcohol to help
remove the adhesive residue.
1. Select a mounting location where
the device has an unobstructed
view of the sky.
Ensure the location does not
block the driver’s view.
2. Clean the mounting location with
rubbing alcohol.
3. Dry the mounting location using a
clean, dry cloth.
3
Getting Started
4. Remove one side of the
protective liner from the adhesive
pad ➊.
➋
LOCK
LOCK
➌
➊
5. Place the adhesive pad on the
bottom of the mounting base ➋.
6. Remove the remaining protective
liner.
7. Ensure the locking lever ➌ on the
mounting base is facing toward
you, and position the mounting
base on the newly cleaned
mounting area.
To ensure an effective bond between
the adhesive pad and mounting
location, wait 24 hours before
attaching a device.
4
Attaching the Device to the Base
Before you use your device on
battery power, you should charge it.
1. Plug the vehicle power cable ➊
into the mini-USB connector ➋
on the cradle ➌.
➌
➊
➋
➍
2. Snap the cradle onto the arm ➍.
3. Slide the locking lever ➎ on the
base to the unlocked position.
LOCK
➎
dēzl 560 Owner’s Manual
Getting Started
4. Slide the disk on the bottom
of the arm into the base until it
clicks.
5. Slide the locking lever to the
locked position.
6. Fit the bottom of the device into
the cradle.
7. Tilt the device back until it snaps.
8. Plug the other end of the vehicle
power cable into a power outlet
in your vehicle.
If you are using a traffic receiver
in Europe, you must connect the
external antenna to receive traffic
information.
Connecting the External
Antenna
2. Secure the external antenna to
the windshield using the suction
cups.
NOTE: To optimize signal
strength, route the external
antenna on the windshield
vertically, if possible.
Notice
Before mounting the device, see
the Important Safety and Product
Information guide for information
about laws pertaining to windshield
mounting.
dēzl 560 Owner’s Manual
1. Connect the external antenna ➊
to the traffic receiver ➋.
➊
➋
5
Getting Started
About myDashboard
Use myDashboard to register your
device, check for software and map
updates, access product manuals and
support, and more.
Setting Up myDashboard
1. Connect the USB cable to the
micro-USB connector ➊ on the
device.
➊
2. Connect the USB cable to the
USB port on your computer.
3. Go to www.garmin.com
/dashboard.
4. Follow the on-screen instructions.
Registering the Device
1. From myDashboard, click
Register Now.
2. Follow the on-screen instructions.
6
3. Keep the original sales receipt, or
a photocopy, in a safe place.
Updating the Software
1. Open myDashboard (page 6).
2. If necessary, under Software
Updates, click Update Now.
3. Follow the on-screen instructions.
nüMaps Guarantee™
Your device is eligible for one
free map update within 60 days of
acquiring satellites while driving
with your device. You are not
eligible for the free map update if
you register by phone or wait longer
than 60 days after the first time you
acquire satellites while driving with
your device. For more information,
go to www.garmin.com/numaps.
dēzl 560 Owner’s Manual
Getting Started
Updating Maps
1. Open myDashboard (page 6).
2. Register the device (page 6).
3. If necessary, under Map Updates,
click Update Now.
4. Follow the on-screen instructions.
Entering a Truck or RV
Profile
WARNING
Entering your vehicle profile does
not guarantee that your vehicle’s
characteristics will be accounted for
in all route suggestions. It is your
responsibility to account for your
vehicle’s height, length, weight,
and other relevant restrictions when
driving. Always defer to all posted
road signs and road conditions when
making driving decisions.
dēzl 560 Owner’s Manual
Before you can operate in Truck or
RV mode, you must enter your truck
or RV profile.
Truck transportation mode is selected
the first time you turn on your
device. You can select Switch Mode
to enter an RV profile.
1. When the warning screen
appears, touch Agree.
2. Touch Yes to enter your truck
profile.
3. Follow the on-screen instructions.
Acquiring Satellites
Before you can navigate with your
device, you must acquire satellites.
For more information about GPS, go
to www.garmin.com/aboutGPS.
7
Getting Started
1. Turn on your device.
2. If necessary, go outdoors to
an open area, away from tall
buildings and trees.
Acquiring satellites can take a
few minutes. When the device has
acquired satellite signals, the signal
strength bars on the main menu are
. When it loses satellite
green
signals, the bars turn red or clear
.
Device Overview
➊
Adjusting the Screen
Brightness
1. Press and quickly release the
Power key.
2. Touch and drag the scroll bar.
Resetting the Device
You can reset the device if it stops
functioning.
1. Hold the Power key for 8
seconds, and release it.
The device turns off.
2. Wait 1 second.
3. If the device is using battery
power, press and release the
Power key.
➋
➊ Power key
™
➋ microSD card slot
8
dēzl 560 Owner’s Manual
Getting Started
Adjusting the Volume
1. Touch Volume.
2. Select an option:
• Adjust the slider left to right
to adjust the volume.
• Touch to mute all audio.
Using the Main Menu
➊
➋
➌
➍ ➎ ➏ ➐ ➑
dēzl 560 Owner’s Manual
• Touch ➊ to select a transportation
mode.
• Touch ➋ to find a destination.
• Touch ➌ to view the map.
• Touch ➍ to stop a route.
• Touch ➎ to detour a route.
• Touch ➏ to make a call when
connected to a compatible mobile
phone.
Go to www.garmin.com
/bluetooth for information.
• Touch ➐ to adjust the volume.
• Touch ➑ to open the menu of
tools and settings.
9
Getting Started
Using the On-screen
Buttons
• Touch to return to the
previous screen.
• Touch and to see more
choices.
• Touch and hold and to
scroll faster.
• Touch to search by name.
Using the On-screen
Keyboard
See “Language Settings” to change
the keyboard layout (page 66).
• Touch
to add a space.
• Touch within the field to move
the cursor.
• Touch
to delete a character.
• Touch and hold
to erase the
entire entry.
• Touch
to select the keyboard
language mode.
• Touch
to enter special
characters, such as punctuation
marks.
• Touch
to change character
capitalization.
• Touch a character on the
keyboard to enter a letter or
number.
10
dēzl 560 Owner’s Manual
Getting Started
Transportation Modes
Automobile mode
Truck mode
RV mode
Pedestrian mode
Using a Backup Camera
If a composite video backup camera
has been installed in your vehicle,
you can view the output of the
camera on your device.
Connect the camera to the videoin jack ➊ on the cradle.
Routing is calculated differently
based on your transportation mode.
Changing the Transportation
Mode
1. From the main menu, touch the
transportation mode icon.
2. Select a mode.
3. Touch Save.
dēzl 560 Owner’s Manual
➊
The camera output appears when
a video signal is present.
11
Searching for a Location
Searching for a
Location
Finding an Address
NOTE: Depending on the version of
the built-in map data on your device,
the button names and the order of
steps could be different from the
steps below.
1. From the main menu, touch
Where To? > Address.
2. If necessary, change the state, the
country, or the province.
3. Touch Search All.
TIP: You can touch Spell City to
search by city or postal code. Not
all map data provides postal code
searching.
4. Enter the number for the address,
and touch Done.
12
5. Enter the street name, and touch
Done.
6. If necessary, select the street.
7. If necessary, select the address.
Using the Location Map
The location map opens after you
select a location from the Where To?
menu.
➊
➌
➋
➍
➎
➏
• Touch ➊ to save the location to
your favorites.
• On some models, touch ➊ to call
the selected location when the
device is connected to a phone.
dēzl 560 Owner’s Manual
Searching for a Location
• Touch the information balloon ➋
to view more information for the
location.
• Touch ➌ to zoom in and out.
• Touch ➍ to return to the previous
page.
• Touch and drag ➎ to view
different parts of the map.
• Touch ➏ to create a turn-by-turn
route to this location.
Finding a Location
Using the Map
1. From the main menu, touch
Where To? > Browse Map.
2. Select a location.
An information balloon appears
for the location.
dēzl 560 Owner’s Manual
Viewing a Route on the Map
1. From the location map, touch the
information balloon.
2. Touch the route information box.
Finding NTTS Services
The National Truck and Trailer
Services (NTTS) Breakdown
Directory lists businesses for
the trucking industry, such as
truck repair and tire sales. NTTS
information is available in some
areas.
Data for NTTS Services is updated
periodically. To purchase updates, go
to http://buy.garmin.com.
1. From the main menu, touch
Where To? > NTTS.
2. Select a category.
3. If necessary, select a subcategory.
4. Select a destination.
13
Searching for a Location
Using Exit Services
You can find services such as fuel,
lodging, and truck stops at upcoming
highway exits. The device displays
available services based on the usage
mode. Exit service information
is available only on controlledaccess roads, such as interstates or
motorways.
NOTE: Exit services are not
available for Pedestrian mode.
1. From the main menu, touch
Where To? > Points of Interest
> Trucking.
2. Select a category.
3. If necessary, select a subcategory.
4. Select a destination.
Setting a Home Location
You can set your home location for
the location you return to most often.
1. While navigating a route, from
the main menu, touch Where To?
> Exit Services.
2. Select an option.
1. From the main menu, touch
Where To? > Go Home.
2. Select Enter My Address,
Use My Current Location, or
Recently Found.
Finding Trucking Points
of Interest
Going Home
Before you can navigate to home,
you must set a home location.
The detailed maps loaded in your
device contain trucking points of
interest, such as truck stops, rest
areas, and weigh stations.
14
From the main menu, touch
Where To? > Go Home.
dēzl 560 Owner’s Manual
Searching for a Location
Resetting Your Home
Location
1. From the main menu, touch
Where To? >
> Set Home
Location.
2. Select an option.
Editing Your Home Location
Information
1. From the main menu, touch
Where To? > Favorites > Home.
2. Touch
> Edit.
3. Enter your changes.
4. Touch Done.
About Points of Interest
The detailed maps loaded in your
device contain points of interest,
such as restaurants, hotels, and auto
services. You can use the Points
of Interest category to browse for
nearby businesses and attractions.
dēzl 560 Owner’s Manual
Finding a Location by
Spelling the Name
1. From the main menu, touch
Where To? > Points of Interest
> Spell Name.
2. Enter all or part of the name, and
touch Done.
3. Select a destination.
Finding a Point of Interest by
Category
1. From the main menu, touch
Where To? > Points of Interest.
2. Select a category.
3. If necessary, select a subcategory.
4. Select a destination.
Using Photo Navigation
You can upload pictures onto your
device or memory card that include
location information and create
routes to the pictured locations.
15
Searching for a Location
1. Connect your device to your
computer (page 6).
2. Go to http://connect.garmin.com
/photos.
3. Follow the instructions to select
and load pictures to your device.
4. Disconnect the device from the
computer.
5. Turn on the device.
6. From the main menu, touch
Where To? > Favorites >
Photos.
A list of pictures with location
information appears.
7. Select a picture.
Removing an Incorrect Point
of Interest
When your search results contain
an outdated or incorrect point of
interest, you can remove the location
from future searches.
16
1. From the location map, touch the
information balloon.
2. Touch
> Report Error > Yes.
The location is removed from future
searches.
Reporting an Incorrect Point
of Interest
Before you can report an incorrect
point of interest, you must remove it
from future searches (page 16).
1. Connect your device to your
computer (page 6).
2. Go to www.garmin.com/
dashboard.
3. Under myDashboard Preferences,
click Change Preferences > Yes.
myDashboard collects the data from
your device.
dēzl 560 Owner’s Manual
Searching for a Location
Rating a Point of Interest
When available, you can view and
change the star rating for a point of
interest.
1. From the location map, touch the
information balloon.
If available, the star ratings
appear under the address of the
location.
2. Touch the stars to rate the point
of interest.
The star rating updates on your
device.
Finding Your Last
Parking Spot
From the main menu, touch
Where To? > Parking > Last
Spot.
dēzl 560 Owner’s Manual
Viewing a List of
Recently Found
Locations
Your device stores the last 50
locations you have found.
From the main menu, touch
Where To? > Recently Found.
Clearing the List of Recently
Found Locations
From the main menu, touch
Where To? > Recently Found >
> Clear > Yes.
Favorites
You can save locations in your
favorites so you can quickly find
them and create routes to them.
Your home location is also stored in
favorites.
17
Searching for a Location
Saving Your Current Location
to Favorites
1. From the map, touch the vehicle
icon.
2. Touch Save.
3. Enter a name.
The location is saved in Favorites.
Saving Locations to
Favorites
1. Search for the location (page 12).
2. From the Go! page, touch
>
Save > OK.
Finding Favorites
1. From the main menu, touch
Where To? > Favorites.
2. If necessary, select a category.
3. Select a saved location.
Editing Favorites
1. From the main menu, touch
Where To? > Favorites.
2. Select a category.
18
3.
4.
5.
6.
Select a favorite.
Touch the information balloon.
Touch
> Edit.
Select an option:
• Touch Name.
• Touch Phone Number.
• Touch Categories to enter
a category name for the
favorite.
NOTE: Categories appear if
the device contains at least 12
favorites.
• Touch Assign Photo to save a
photo with the favorite.
• Touch Change Map Symbol
to change the symbol used to
mark the favorite on a map.
7. Edit the information.
8. Touch Done.
dēzl 560 Owner’s Manual
Searching for a Location
Deleting Favorites
1. From the main menu, touch
Where To? > Favorites.
2. If necessary, select a category.
3. Select a favorite.
4. Touch
> Delete > Yes.
Changing the Map
Coordinate Format
1. From the Home Screen, touch
Where To? > Coordinates >
Format.
2. Select a format.
Entering Coordinates
Changing the Search
Area
If you know the geographic
coordinates of your destination, you
can use your device to navigate to
the destination using the latitude and
longitude coordinates. This can be
especially helpful when geocaching.
1. From the main menu, touch
Where To? > Coordinates.
2. Touch a field to enter the latitude
and longitude data.
3. Touch View on Map.
dēzl 560 Owner’s Manual
The device automatically searches
for places near your present location.
You can also search for a location
near a different city, near a recent
destination, or near a favorite
destination.
1. From the main menu, touch
> Near.
Where To? >
2. Select an option.
3. Touch Save.
19
Planning a Trip
Planning a Trip
You can use Trip Planner to create
and save a trip with multiple
destinations.
1. From the main menu, touch
Where To? > Trip Planner.
2. Touch .
3. Touch Select Start Location.
4. Search for a location (page 12).
5. Touch Select.
6. Touch to add additional
locations.
7. Touch Next.
8. Enter a name, and touch Done.
9. Touch Map to view the trip on
the map.
20
Scheduling a Trip
The trip planner allows you to set a
departure time and trip duration.
1. From the main menu, touch
Where To? > Trip Planner.
2. Select a trip.
3. Select a location.
4. Touch Departure Time or
Arrival Time.
5. Select a date and time.
6. Touch Save.
7. Touch Duration.
8. Select the amount of time you
will spend at the location.
9. Touch Save.
10.If necessary, repeat steps 3–9 for
each location.
dēzl 560 Owner’s Manual
Planning a Trip
Navigating a Saved Trip
1. From the main menu, touch
Where To? > Trip Planner.
2. Select a saved trip.
3. Touch Go!.
Editing a Saved Trip
1. From the main menu, touch
Where To? > Trip Planner.
2. Select a saved trip.
3. Touch .
4. Select an option:
• Touch Rename Trip to edit
the trip name.
• Touch Edit Destinations to
add or delete locations.
• Touch Delete Trip.
• Touch Optimize Order to
arrange your trip locations in
the most-efficient order.
dēzl 560 Owner’s Manual
Setting a Simulated
Location
1. From the main menu, touch Tools
> Settings > System > GPS
Simulator > On.
2. From the main menu, touch
Where To? > Browse Map.
3. Touch an area on the map.
4. Touch
> Set Location.
Simulating a Route
1. From the main menu, touch Tools
> Settings > System > GPS
Simulator > On.
2. Search for a location (page 12).
3. Touch Go! > Yes.
21
Navigation
Navigation
Map Features While
Navigating
notice
The speed limit icon feature is
for information only and does not
replace the driver’s responsibility to
abide by all posted speed limit signs
and to use safe driving judgment
at all times. Garmin will not be
responsible for any traffic fines or
citations that you may receive for
failing to follow all applicable traffic
laws and signs.
Your route is marked with a magenta
line. A checkered flag marks your
destination.
As you travel, your device guides
you to your destination with voice
22
prompts, arrows on the map, and
directions at the top of the map. If
you depart from the original route,
your device recalculates the route
and provides new directions.
An icon displaying the current speed
limit may appear as you travel on
major roadways.
Truck speed limits may appear
for Truck mode based on truck
configuration data and applicable
laws for the state or province.
When you are driving in Truck mode
or RV mode, a tone may sound
and may appear, indicating that
truck suitability for this roadway is
unknown. Always obey posted signs
and regulations.
NOTE: Truck speed limits are not
available for all areas.
dēzl 560 Owner’s Manual
Navigation
Using the Navigation
Map
➊
➍
➐
➋
➌
➎
➑
➏
➒
➓
• Touch ➊ to view the next turn.
The turn indicator also tells you
which lane you should be in to
prepare for your next maneuver,
when available.
• Touch ➋ to view the turn list.
• Touch ➌ to zoom in and zoom
out.
• Touch ➍ to view warning
information, when available
(page 68).
dēzl 560 Owner’s Manual
• Touch ➎ to view information for
the location.
• Touch and drag ➏ to view a
different area of the map.
• Touch ➐ to return to the main
menu.
• Touch and hold ➐ from any
screen to return to the main
menu.
• Touch ➑ to display a different
data field.
• Touch ➒ to view trip
information.
• Touch ➓ to change the speed
limit if the speed limit icon
shown on the map is incorrect.
A truck speed limit appears if
available.
23
Navigation
Viewing Trip Information
The trip information page displays
your present speed and provides
statistics about your trip.
TIP: If you make frequent stops,
leave the device turned on so it can
accurately measure elapsed time
during the trip.
From the map, touch the Speed
field.
24
Resetting Trip Information
1. From the map, touch Speed > .
2. Select an option:
• When not navigating a route,
touch Reset All to reset
every data field, except the
speedometer, on the page.
• Touch Reset Trip Data to
reset the information on the
trip computer.
• Touch Reset Max. Speed to
reset the maximum speed.
• Touch Reset Trip B to reset
the odometer.
dēzl 560 Owner’s Manual
Navigation
Viewing the Turn List
When you are navigating a route,
you can view all of the turns for your
entire route and the distance between
turns.
1. Touch the text bar on the top of
the map.
Viewing the Next Turn
Before you can view the next turn,
you must be navigating a route.
The next turn shows the turn on the
map and the distance and time left
before you reach the turn.
From the map, touch
.
2. Select an option:
• Select a turn on the list to
view the next turn.
> Show Map to
• Touch
view the entire route on the
map.
dēzl 560 Owner’s Manual
25
Navigation
Viewing the Junction
View
Selecting a Route
Calculation Mode
On some models, the junction view
displays a view of some upcoming
junctions and in which lane you
should be driving.
1. Search for the location (page 12).
2. Select or .
Before you can view the junction
view, you must be navigating a route.
NOTE: Junction view is not
available for all junctions.
From the map, touch
.
Before you can select a route
calculation mode, you must set the
device to prompt you (page 64).
Adding One Point to the
Active Route
NOTE: You cannot add a point to a
route in Pedestrian mode.
1. While navigating a route, touch
to return to the main menu.
2. Touch Where To?.
3. Search for the location (page 12).
26
dēzl 560 Owner’s Manual
Navigation
4. Touch Go!.
5. Touch Add to Active Route.
6. Touch and drag the locations to
order them, and touch Done.
Taking a Detour
While navigating a route, you can
use detours to avoid obstacles ahead
of you, such as construction zones.
If Advanced Detours is enabled, you
can select a specific distance or road
to avoid (page 65).
1. While navigating a route, touch
to return to the main menu.
2. Touch Detour.
3. If necessary, select an option:
• To avoid the next 1/2 mile,
select Next 1/2 Mile on
Route.
dēzl 560 Owner’s Manual
• To avoid the next 2 miles,
select Next 2 Miles on
Route.
• To avoid the next 5 miles,
select Next 5 Miles on
Route.
• To select a specific road
to avoid, select Detour by
Road(s) on Route.
If the route you are currently taking
is the only reasonable option, the
device might not calculate a detour.
Stopping the Route
While navigating a route, touch
> Stop.
27
Navigation
About myTrends™
After you save your frequentlyvisited destinations as favorites,
myTrends senses when you drive to
them. After recording your driving
patterns, myTrends displays the route
and the estimated time of arrival in
the navigation bar on the map.
Setting up myTrends
1. From the main menu, touch Tools
> Settings > Navigation.
2. Select an option: Automobile,
Truck, or RV.
3. Touch nüRoute > myTrends >
Enabled.
4. Save a destination as a favorite
(page 17).
5. With the device on, drive to the
favorite at least three times.
28
6. When myTrends information
appears in the navigation
bar, touch it to view route
information.
Using the Pedestrian
Navigation Map
In Pedestrian mode, your route is
displayed on a two-dimensional map.
➊
➌
➋
➊
➍
• Touch ➊ to switch between
sections of the route.
• Touch ➋ to view the route
itinerary.
• Touch ➌ to center the map on
your current location.
• Touch ➍ to zoom in and zoom
out.
dēzl 560 Owner’s Manual
Navigation
Public Transit Options
If you have cityXplorer maps
installed, the device calculates a
route that uses a combination of
public transit options, such as riding
a bus or subway, and walking.
The black dots on the map are public
transit stops along your route.
NOTE: You can limit the distance
spent walking during a pedestrian
route (page 63).
cityXplorer maps are not included
with the device. See
http://my.garmin.com to purchase
cityXplorer maps.
The yellow icons indicate the
navigation method used in each
section of the route. For example,
when you see , board a bus at that
point in the route.
dēzl 560 Owner’s Manual
29
Traffic
Traffic
NOTICE
Garmin is not responsible for the
accuracy or timeliness of the traffic
information. Traffic information is
not available in all areas.
This device can receive FM Traffic
Message Channel (TMC) traffic
content, which provides information
on nearby traffic incidents and
construction. Some models are
packaged with a FM TMC traffic
receiver, built into the vehicle power
cable, and have a lifetime traffic
subscription.
For information about traffic
receivers and coverage areas, go to
www.garmin.com/traffic.
30
Subscription Activation
You do not need to activate the
subscription included with your FM
traffic receiver. The subscription
activates automatically after your
device acquires satellite signals
while receiving traffic signals from
the pay service provider.
Traffic Receiver
➊
➊
➋
➌
➍
➎
➋
➌ ➍
➎
Mini-USB connector
External antenna connector
Internal antenna
Power LED
Vehicle power adapter
dēzl 560 Owner’s Manual
Traffic
Receiving Traffic
Information
When the receiver is within a traffic
coverage area, your device will begin
displaying traffic information.
The traffic receiver and the
device must be in data range of
an FM station transmitting traffic
information.
1. Connect the traffic receiver to an
external power source.
2. Connect the traffic receiver to the
device.
NOTE: Heated (metallized)
windshields could degrade the
performance of the traffic receiver.
dēzl 560 Owner’s Manual
About the Traffic Icon
When you are receiving traffic
information, a traffic icon appears
on the map. The traffic icon changes
color to indicate the severity of
traffic conditions.
Color Severity
Green Low
Yellow Medium
Red
High
Meaning
Traffic is
flowing freely.
Traffic is
moving but
there is a
delay. There
is moderate
traffic
congestion.
Traffic is not
moving or
moving very
slowly. There
is a severe
delay.
31
Traffic
Traffic on Your Route
 Caution
If you choose to recalculate your
route when you are navigating in
Truck mode, the recalculated route
might include roads that have not
been verified for truck accessibility.
You should use caution and good
judgment and obey all posted signs
and regulations.
When calculating your route, the
device examines the current traffic
and automatically optimizes the
route for the shortest time. If a severe
traffic delay occurs on your route
while you are navigating, the device
automatically recalculates the route.
You might still be routed through
traffic if no better alternative routes
exist.
32
Manually Avoiding Traffic on
Your Route
1. From the map, touch .
2. Touch Traffic On Route.
3. If necessary, touch the arrows to
view other traffic delays on your
route.
4. Touch
> Avoid.
Viewing the Traffic Map
The traffic map shows color-coded
traffic flow and delays on nearby
roads.
1. From the map, touch .
2. Touch Traffic Map to view the
traffic incidents on a map.
dēzl 560 Owner’s Manual
Traffic
Searching for Traffic
Delays
1. From the map page, touch .
2. Touch Traffic Search to view a
list of roads with traffic delays.
3. Touch an item in the list to view
delays on the road.
4. If there is more than one delay,
touch the arrows to view
additional delays.
Adding a Subscription
You can purchase traffic
subscriptions for other regions or
countries.
3. Touch .
4. Write down the FM traffic
receiver unit ID.
5. Go to www.garmin.com/fmtraffic
to purchase a subscription and get
a 25-character code.
6. Touch Next on the device.
7. Enter the code.
8. Touch Done.
The traffic subscription code cannot
be reused. You must obtain a new
code each time you renew your
service. If you own multiple FM
traffic receivers, you must obtain a
new code for each receiver.
1. From the main menu, touch Tools
> Settings > Traffic.
2. If necessary, touch
Subscriptions.
dēzl 560 Owner’s Manual
33
Traffic
About Offers and
Advertisements
If your device package includes a
traffic receiver, you will receive
location-relevant offers and coupons.
Ad-based traffic information is only
available in North America.
The traffic receiver must be
connected to external power and you
must be in a coverage area to receive
ad-based traffic information.
See our privacy statement at www
.garmin.com/products/privacy for
important privacy information.
NOTE: This feature is not available
in all areas.
Viewing Offers
1. Select an offer that appears on the
screen to search for the nearest
location related to that offer.
2. If the offer includes an icon,
touch the icon on the location
map to receive a coupon code.
3. Write down this code, and
present it when you arrive at the
location.
Viewing an Offer List
From the main menu, touch Tools
> Offers.
Disabling Traffic and Offers
Before you can disable offers, you
must disable traffic.
From the main menu, touch Tools
> Settings > Traffic > Disabled.
 CAUTION
Do not attempt to write down the
coupon codes while driving.
34
dēzl 560 Owner’s Manual
Using Trucking Features
Using Trucking
Features
About IFTA Logging
You can use IFTA Logging to
archive data needed for International
Fuel Tax Agreement documentation,
such as fuel-purchase data and miles
driven.
Before you can use IFTA Logging,
you must be in Truck mode
(page 11).
NOTE: This feature is not available
in all areas.
dēzl 560 Owner’s Manual
Entering Fuel Data
1. From the main menu, touch Tools
> IFTA Logging > At the Pump.
2. Enter the fuel price per gallon.
3. Touch the Fuel Used field.
4. Enter the amount of fuel
purchased.
5. If necessary, select an option:
• To record the amount in liters,
touch Gallons > Liters >
Save.
• To record the amount in
gallons, touch Liters >
Gallons > Save.
6. If necessary, select the Tax
Included check box.
35
Using Trucking Features
7. Touch Next.
8. Select the vendor from whom
you purchased the fuel.
9. Select the purchaser of the fuel.
10.Touch Save.
5. Select an option:
• Touch a field to edit the
information.
• Touch > Yes to delete the
log.
Using Fuel Logs
Before you can use IFTA Logging,
you must be in Truck mode
(page 11).
Viewing and Exporting a
Jurisdiction Summary
The jurisdiction summary lists
data for each state or province in
which your vehicle has operated
during each quarter. The jurisdiction
summary is available in some areas.
NOTE: This feature is not available
in all areas.
1. From the main menu, touch Tools
> IFTA Logging > Fuel Logs.
2. If necessary, select a truck.
3. If necessary, select a quarter.
4. Select a log.
36
Before you can use IFTA Logging,
you must be in Truck mode
(page 11).
NOTE: This feature is not available
in all areas.
dēzl 560 Owner’s Manual
Using Trucking Features
1. From the main menu, touch Tools
> IFTA Logging > Jurisdiction
Summary.
2. If necessary, select a truck.
3. If necessary, select a quarter.
4. To export a jurisdiction summary,
> Export > OK.
touch
The device exports the summary
to a CSV file and stores it in the
Reports folder in the device
memory.
Using Trip Reports
Before you can use IFTA Logging,
you must be in Truck mode
(page 11).
NOTE: This feature is not available
in all areas.
dēzl 560 Owner’s Manual
1. From the main menu, touch
Tools > IFTA Logging > Trip
Reports.
2. If necessary, select a truck.
3. If necessary, select a quarter.
4. Select a report.
5. Select an option:
> Delete, and touch
• Touch
the check box to delete a
report.
• Touch
> Combine, and
touch the check boxes to
combine reports.
• Touch
> Export > OK.
The device exports the report
to a CSV file and stores it
in the Reports folder in the
device memory.
37
Using Trucking Features
Viewing Exported
Jurisdiction Summaries and
Trip Reports
NOTICE
If you do not know the purpose of
a file, do not delete it. Your device
memory contains important system
files that should not be deleted.
1. Connect the device to your
computer (page 6).
2. Open the “Garmin” drive or
volume, and open the Reports
folder.
3. Open the IFTA folder.
4. Open the CSV file.
About Hours of Service
NOTICE
Although this device is enabled
to record hours-of-service
information, this device is NOT
an approved substitute for paper
logbook recording requirements
under Federal Motor Carrier Safety
Administration regulations. Drivers
should comply with all applicable
federal and state paper logbook
requirements.
You can use Hours of Service to
record your working hours, which
will help you comply with safety
regulations.
Before you can use Hours of Service,
you must be in Truck mode
(page 11), and you must create a
driver profile (page 40).
NOTE: This feature is not available
in all areas.
38
dēzl 560 Owner’s Manual
Using Trucking Features
Recording Your Duty Status
1. From the main menu, touch Tools
> Hours of Service.
2. Select a driver > Duty Status.
3. Select an option:
• Touch Off Duty to record the
time you are off duty.
• Touch Sleeper to record
the time you are resting in a
sleeper berth.
• Touch Driving to record
the time you are driving a
commercial motor vehicle in
operation.
• Touch On Duty to record the
time you are on duty, but not
driving a commercial motor
vehicle.
4. Touch Save.
dēzl 560 Owner’s Manual
Using Driving Logs
Before you can use Hours of Service,
you must be in Truck mode
(page 11), and you must create a
driver profile (page 40).
NOTE: This feature is not available
in all areas.
1. From the main menu, touch Tools
> Hours of Service.
2. Select a driver > View Log.
3. Select an option:
• Touch the date field, and
touch a different date to view.
• Touch a status bar to view
status details.
• Touch the grid, and touch a
field to edit.
• Touch to view violation
information.
39
Using Trucking Features
About Drivers
Multiple drivers can use the same
device to track hours of service.
Before you can use Hours of Service,
you must be in Truck mode
(page 11).
If you work for more than one carrier
in a 24-hour period, you must record
each carrier. You must record the
time zone of your home terminal
even if you cross other time zones.
NOTE: This feature is not available
in all areas.
Adding Drivers
1. From the main menu, touch Tools
> Hours of Service > .
2. Follow the on-screen instructions.
40
Managing Driver Information
1. From the main menu, touch Tools
> Hours of Service.
2. Select a driver > Driver Info.
3. Select an option:
• Touch a field to edit the
information.
• Touch
> Delete Driver >
Yes to delete the driver.
Adding Shipments
Before you can use Hours of Service,
you must be in Truck mode
(page 11), and you must create a
driver profile (page 40).
NOTE: This feature is not available
in all areas.
dēzl 560 Owner’s Manual
Using Trucking Features
1. From the main menu, touch Tools
> Hours of Service.
2. Select a driver > Manage
Shipments > .
3. Touch Reference Number, enter
the reference information, and
touch Done.
TIP: The reference number is the
shipping document number, or
the name of the company and the
group you are transporting.
4. If necessary, touch Start Day,
and touch the date service begins.
5. If necessary, touch End Day, and
touch the date service ends.
6. Touch Save.
dēzl 560 Owner’s Manual
Managing Shipments
Before you can use Hours of Service,
you must be in Truck mode
(page 11), and you must create a
driver profile (page 40).
NOTE: This feature is not available
in all areas.
1. From the main menu, touch Tools
> Hours of Service.
2. Select a driver > Manage
Shipments.
3. Select a shipment.
4. Select an option:
• Touch a field to edit the
information.
• Touch
> Delete Shipment
> OK to delete the shipment.
41
Using Trucking Features
Exporting Driving Logs
Before you can use Hours of Service,
you must be in Truck mode
(page 11), and you must create a
driver profile (page 40).
NOTE: This feature is not available
in all areas.
1. From the main menu, touch Tools
> Hours of Service.
2. Select a driver > Export Log.
3. If necessary, enter your tractor
number, tractor VIN, and trailer
number.
4. If necessary, select a log to
export.
5. If necessary, select the location to
export the log.
The device exports the log to a CSV
file and stores it in the Reports folder
in the device memory or on the
memory card.
42
Viewing Exported Driving Logs
NOTICE
If you do not know the purpose of
a file, do not delete it. Your device
memory contains important system
files that should not be deleted.
1. Connect the device to your
computer (page 6).
2. Select an option:
• To view the logs on your
device, open the “Garmin”
drive or volume, and open the
Reports folder.
• To view the logs on your
memory card, open the drive
or volume for the memory
card, and open the Garmin
folder.
3. Open the HOSExports folder.
4. Open the CSV file.
dēzl 560 Owner’s Manual
Using the Tools
Using the Tools
Viewing Current
Location Information
Use the Where Am I? page to view
information about your current
location. This feature is helpful if
you need to tell emergency personnel
your location.
From the main menu, touch Tools
> Where Am I?.
Finding Nearby Services
1. From the main menu, touch Tools
> Where Am I?
2. Touch Hospitals, Police
Stations, or Fuel to view the
nearest locations in that category.
dēzl 560 Owner’s Manual
Using Help
From the main menu, touch Tools
> Help to view information about
using the device.
Searching Help Topics
From the main menu, touch Tools
> Help > .
About ecoRoute™
The ecoRoute feature calculates
your vehicle fuel economy, carbon
footprint, and the fuel price of
navigating to a destination, and
offers tools for improving fuel
efficiency.
The data provided by the ecoRoute
feature are estimates only. The
data is not actually read from your
vehicle. To receive more-accurate
fuel reports for your specific vehicle
and driving habits, calibrate the fuel
economy (page 44).
43
Using the Tools
NOTE: ecoRoute is available only
for Automobile mode.
Using ecoRoute
1. From the main menu, select
Tools > ecoRoute.
2. If prompted, enter fuel and
mileage information.
The first time you use the
ecoRoute features, you must
enter vehicle information.
Calibrating the Fuel Economy
Calibrate the fuel economy to receive
more-accurate fuel reports for your
specific vehicle and driving habits.
You should calibrate when you fill up
your fuel tank.
1. From the main menu, select
Tools > ecoRoute > At the
Pump.
2. Enter the current fuel price.
44
3. Enter how much fuel your
vehicle has used since the last fill
up.
4. Enter the distance you have
traveled since the last fill up.
5. Select Next.
The device calculates the average
vehicle fuel economy.
About the ecoChallenge
The ecoChallenge helps you
maximize your fuel economy by
scoring your driving habits. The
higher your ecoChallenge scores,
the more fuel you have saved. The
ecoChallenge collects data and
calculates a score whenever your
device is moving and in Automobile
transportation mode.
dēzl 560 Owner’s Manual
Using the Tools
Viewing Your ecoChallenge
Scores
From the main menu, select Tools >
ecoRoute > ecoChallenge.
About the ecoChallenge Score
The leaf color on the ecoChallenge
icon changes depending on your
performance in the challenge.
Overall—displays an average of
the speed, acceleration, and braking
score.
Speed—displays your score for
driving at your vehicle’s optimal
speed for conserving fuel (45-60
mph for most vehicles).
Acceleration—displays your
score for smooth and gradual
acceleration. You lose points for
rapid acceleration.
dēzl 560 Owner’s Manual
Braking—displays your score for
smooth and gradual braking. You
lose points for hard braking.
Removing the ecoChallenge
Score From the Map
From the map, select
Settings > Hide.
>
Resetting the ecoChallenge
From the map, select
Reset.
>
>
>
Viewing Fuel Economy
Information
1. From the main menu, select Tools
> ecoRoute > Fuel Economy.
2. Select a section of the graph to
zoom in.
45
Using the Tools
Adjusting the Vehicle Profile
1. From the main menu, touch Tools
> ecoRoute > Vehicle Profile.
2. Select an option to manually
adjust your fuel settings.
• Fuel Type
• City Fuel Economy
• Hwy. Fuel Economy
• Fuel Price
TIP: For best results, calibrate
your fuel economy (page 44)
instead of adjusting the city and
highway fuel efficiency.
About the Mileage Report
Mileage reports provide the distance,
the time, the average fuel economy,
and the fuel cost of navigating to a
destination.
46
A mileage report is created for every
route that you drive. If you stop
a route on your device, a mileage
report is created for the distance you
traveled.
Viewing a Mileage Report
You can view saved mileage reports
on your device. You can also access
mileage reports in the Reports folder
on your device drive/volume
(page 56).
1. From the main menu, touch Tools
> ecoRoute > Mileage Report.
2. Select a report.
Viewing Driving Tips
From the main menu, touch Tools
> ecoRoute > Tips.
dēzl 560 Owner’s Manual
Using the Tools
Resetting ecoRoute Data
1. From the main menu, touch Tools
> ecoRoute.
2. Select a category.
3. Touch > Reset.
Using the Picture Viewer
You can view pictures that you
have stored in your device or on a
memory card. See page 55 for more
information about loading pictures
on the device.
From the main menu, touch Tools
> Picture Viewer.
• Touch the arrows to scroll
through the images.
• Touch a picture to view a
larger image of it.
dēzl 560 Owner’s Manual
• Touch to view a slide
show of the pictures.
• Touch the screen to stop the
slide show.
Setting a Picture as
Wallpaper
1. From the main menu, touch Tools
> Picture Viewer.
2. Select a picture.
3. Touch > Set as Wallpaper.
4. Use the on-screen buttons to
adjust the wallpaper.
5. Touch Save.
Deleting Pictures
1. From the main menu, touch Tools
> Picture Viewer.
2. Select a picture.
3. Touch > Delete > Yes.
47
Using the Tools
Using the World Clock
1. From the main menu, touch Tools
> World Clock.
2. Touch a city name.
3. Enter a new city name
4. Touch Done.
5. If necessary, select a city.
Viewing the World Map
From the main menu, touch Tools
> World Clock > .
Nighttime hours appear in the
shaded area.
Using the Calculator
From the main menu, touch Tools
> Calculator.
48
Capturing Screenshots
1. From the main menu, touch
Tools > Settings > Display >
Screenshot > Enabled.
2. Touch to take a screenshot.
The screenshot is saved as a PNG
format image file in the Screenshot
folder on the device (page 56).
Using the Unit Converter
1. From the main menu, touch Tools
> Unit Converter.
2. Touch the box with a unit of
measure listed.
3. Select a unit of measure.
4. Touch Save.
Two units of measure are listed.
5. Touch a unit of measure to
change.
dēzl 560 Owner’s Manual
Using the Tools
6. Select a unit of measure.
7. Touch Done.
8. If necessary, repeat steps 5–7.
9. Enter a value.
10.Touch Done.
Setting Currency Conversion
Rates Manually
You can update the currency
conversion rates manually so that
you are always using the mostcurrent rates.
5. Select a currency box.
6. Select the currency you want to
update.
7. If necessary, repeat steps 3–6 to
select a currency to convert to.
8. Select a box under a currency.
9. Enter a new value for the
currency.
10.Select Done.
11.If necessary, repeat steps 8–10.
1. From the main menu, touch Tools
> Unit Converter.
2. Select the box with a currency
listed.
3. Select Currency.
4. Touch Save.
dēzl 560 Owner’s Manual
49
Hands-Free Phone Calls
Hands-Free Phone
Calls
Bluetooth® technology establishes a
wireless link between two devices,
such as a mobile phone and your
device. To determine whether
your mobile phone with Bluetooth
technology is compatible with the
device, go to www.garmin
.com/bluetooth.
About Pairing the
Devices
The first time you use two devices
together, you must pair them by
establishing a relationship using a
PIN or passkey.
50
Your phone and the device must be
turned on and be within 33 ft. (10 m)
of each other.
Pairing Using the Phone
Settings
You can initiate pairing from
your phone. Refer to your phone
instructions.
1. From the dēzl main menu, touch
Tools > Settings > Bluetooth >
Bluetooth > Enabled > Save.
2. Enable the Bluetooth component
on your phone.
NOTE: This might be in a
menu called Settings, Bluetooth,
Connections, or Hands-Free.
3. Search for Bluetooth devices
using your phone.
dēzl 560 Owner’s Manual
Hands-Free Phone Calls
4. Select the dēzl from the list of
devices.
5. If necessary, enter the device
Bluetooth PIN (1234) into your
phone.
Pairing Using the Device
Settings
1. From the dēzl main menu, touch
Tools > Settings > Bluetooth >
Bluetooth > Enabled > Save.
2. Enable the Bluetooth component
on your phone.
3. Enable Find Me/Discoverable/
Visible mode on your phone.
NOTE: This might be in a
menu called Settings, Bluetooth,
Connections, or Hands-Free.
4. On the dēzl, touch Add Phone >
OK.
dēzl 560 Owner’s Manual
5. Select your phone from the list.
6. Touch OK.
A prompt to pair the phone
with your device appears on the
phone.
7. On your phone, accept the
pairing.
8. If necessary, enter the device
Bluetooth PIN (1234) in your
phone.
Tips After Pairing Your
Devices
• After the initial pairing, the
two devices can connect
automatically each time you turn
them on.
• When your phone is connected
to your device, you are ready to
make phone calls.
51
Hands-Free Phone Calls
• When you turn on the device, it
tries to connect to the last phone
to which it was connected.
• You might have to set your
mobile phone to connect to the
device automatically when it is
turned on.
Managing the Bluetooth
Device List
You can add, disconnect, or delete
phones that your device detects while
Bluetooth is enabled.
1. From the main menu, touch Tools
> Settings > Bluetooth > Add
Phone.
2. Select an option:
• Select a phone for your device
to connect with.
• Touch to add a phone to
the menu.
52
• Touch to delete a phone
from the device memory.
• Touch None to drop your
current connection.
Receiving a Call
• Touch Answer.
• Touch Ignore to ignore the call.
Using the Device During
a Call
During a call, appears. Depending
on the screen shown on your device,
the In Call icon could look different.
1. From the main menu, touch >
End Call.
2. Select an option:
• Touch Keypad to view
a keypad page for using
automated systems such as
voice mail.
dēzl 560 Owner’s Manual
Hands-Free Phone Calls
• Touch Handset to turn off the
device but remain on the call,
or if you need privacy.
TIP: To switch back, touch
Hands-free.
• Touch Mute to turn off the
sound on a call.
Dialing a Point of
Interest
Using Call Waiting
When you are on a call and you
receive a second call (call waiting), a
window appears.
Dialing a Number
• Touch Answer to answer the call
and place the first call on hold.
• Touch > Switch To.
• Touch End Call to hang up.
This does not disconnect the call
on hold.
dēzl 560 Owner’s Manual
1. From the main menu, touch
Phone > Points of Interest.
2. Search for a point of interest.
3. Touch Call.
1. From the main menu, touch
Phone > Dial.
2. Enter the number.
3. Touch Dial.
Entering Your Phone
Number
You can enter the phone number you
want the device to call when you
touch Call Home.
53
Hands-Free Phone Calls
1. From the main menu, touch
Phone > Call Home.
2. Touch Enter Phone Number.
3. Enter the phone number.
4. Touch Done > Yes.
The device dials your home
phone number.
Calling Home
Before you can call home, you must
enter a phone number for your home
location (page 53).
From the main menu, touch
Phone > Call Home.
Placing Calls Using
Voice Dial
Before you can place calls using
voice dial, you may need to train
your phone to recognize your voice
dial commands. Refer to your phone
instructions.
1. From the main menu, touch
Phone > Voice Dial.
2. Speak the contact name.
Checking the Phone
Status
You can check the battery level and
signal strength for your phone.
From the main menu, touch
Phone > Phone Status.
54
dēzl 560 Owner’s Manual
Data Management
Data Management
You can store files, such as JPEG
image files, on your device. The
device has a memory card slot for
additional data storage.
NOTE: The device is not compatible
with Windows® 95, 98, Me, Windows
NT®, and Mac® OS 10.3 and earlier.
File Types
About Memory Cards
You can purchase memory cards
from an electronics supplier, or you
can purchase pre-loaded Garmin
mapping software (www.garmin.com/
trip_planning). In addition to map
storage, the memory card can be used
to store files such as maps, images,
geocaches, routes, waypoints, and
custom POIs.
The device supports these file types.
• JPEG and JPG image files
(page 47).
• Maps and GPX waypoint files
from MapSource® (page 75).
• GPI custom POI files from
Garmin POI Loader (page 75).
dēzl 560 Owner’s Manual
55
Data Management
Installing a Memory Card
1. Insert a memory card into the slot
➊ on the device.
➊
2. Press it in until it clicks.
56
Transferring Files To
Your Computer
1. Connect the device to your
computer (page 6).
Your device and memory card
appear as removable drives in
My Computer in Windows and
as mounted volumes on Mac
computers.
NOTE: Some computers with
multiple network drives cannot
display dēzl drives. See your
operating system Help file to
learn how to map the drives.
2. Browse your computer for a file.
3. Highlight the file.
4. Click Edit > Copy.
dēzl 560 Owner’s Manual
Data Management
5. Open the “Garmin” or memory
card drive or volume.
6. Select Edit > Paste.
The file appears in the list of files
in the device memory or on the
memory card.
Deleting Files
Disconnecting the USB Cable
1. Complete an action:
• For Windows computers,
click the eject icon in your
system tray.
• For Mac computers, drag the
volume icon to the Trash .
2. Disconnect the cable from your
computer.
1. Open the “Garmin” drive or
volume.
2. If necessary, open a folder or
volume.
3. Select a file.
4. Press the Delete key on your
keyboard.
dēzl 560 Owner’s Manual
NOTICE
If you do not know the purpose of
a file, do not delete it. Your device
memory contains important system
files that should not be deleted.
57
Customizing the Device
Customizing the
Device
System Settings
From the main menu, touch Tools >
Settings > System.
• GPS Simulator—stops the
device from receiving a GPS
signal, and saves battery power.
• Units—allows you to change the
units of measure for distance.
• Time Format—allows you to
select a 12-hour, 24-hour, or UTC
display time.
• Current Time—allows you to
manually change the time.
• Safe Mode—disables all
functions that require significant
operator attention and could
become a distraction while
driving.
58
• Garmin Lock—locks the device
(page 71).
• About—displays the software
version number, the unit ID
number, and information on
several other software features.
NOTE: You need this
information when you update
the system software or purchase
additional map data (page 75).
• End User License Agreements
Customizing the Main
Menu
You can create a customized main
menu that contains up to 15 icons.
1. From the main menu, select
Tools > Settings > Main Menu.
2. If necessary, select Customize.
3. Select .
dēzl 560 Owner’s Manual
Customizing the Device
4. If necessary, select .
5. Select an icon.
6. Select Save.
Editing the Main Menu Icons
You can change the size and location
of the icons on your customized
main menu.
1. From the main menu, select
Tools > Settings > Main Menu
> Customize.
2. Select an icon.
3. Select an option:
• Select to delete the icon.
NOTE: The Where To?, View
Map, and Tools icons cannot
be deleted.
• Select to enlarge the icon.
The icon expands from one
cell to four cells.
dēzl 560 Owner’s Manual
TIP: A customized main
menu can fit up to two
enlarged icons.
• Select to shrink a large
icon.
• Drag an icon across the screen
to change its location.
4. Select > Save.
Choosing a Main Menu
1. From the main menu, select
Tools > Settings > Main Menu.
2. Select an option: Use Default or
Use Customized.
While you use the customized
main menu, the default main
menu is saved on the device.
59
Customizing the Device
Adding Truck or RV
Profiles
WARNING
Entering your vehicle profile does
not guarantee that your vehicle’s
characteristics will be accounted for
in all route suggestions. It is your
responsibility to account for your
vehicle’s height, length, weight,
and other relevant restrictions when
driving. Always defer to all posted
road signs and road conditions when
making driving decisions.
1. From the main menu, touch Tools
> Settings > Truck Profile.
2. Select an option: Truck or RV.
3. Touch .
4. If necessary, touch Units to
change the units of measurement.
5. Follow the on-screen prompts.
60
Activating Truck or RV
Profiles
The device calculates routes based
on the width, length, height, weight,
and other settings for the active
profile.
You must activate a profile before
you can navigate in Truck or RV
mode. Before you can activate a
profile, you must add the profile
(page 60).
1. From the main menu, touch Tools
> Settings > Truck Profile.
2. Select an option: Truck or RV.
3. Touch the profile.
4. Touch Select Profile to activate
the profile.
dēzl 560 Owner’s Manual
Customizing the Device
Editing Truck or RV Profiles
Before you can delete a profile, you
must activate a different profile
(page 60).
1. From the main menu, touch Tools
> Settings > Truck Profile.
2. Touch a profile, and touch .
3. Select an option: Edit or Delete.
Automobile, Truck, and
RV Navigation Settings
From the main menu, touch Tools >
Settings > Navigation, and select
Automobile, Truck, or RV.
• nüRoute™ —see page 63.
• Map Detail—sets the level of
detail on the map. More detail
may cause the map to draw
slower.
• Map View—sets the perspective
on the map (page 62).
dēzl 560 Owner’s Manual
• Map Theme—changes the color
of the map data.
• Map Data Layout—changes
the amount of data visible on the
map.
• Vehicle—changes the icon to
represent your position on the
map. Go to www.garmingarage
.com for more icons.
• Trip Log
◦◦ Show on Map—displays the
path of your travels on the
map.
◦◦ Clear Trip Log
• Proximity Points—changes the
proximity points setting
(page 62).
• Sharp Curve Warnings—allows
you to set alerts for sharp curves.
61
Customizing the Device
Changing the Map
Perspective
1. From the main menu, touch Tools
> Settings > Navigation.
2. Select an option: Automobile,
Truck, or RV.
3. Touch Map View.
4. Select an option:
• Touch Track Up to display
the map in two dimensions
(2-D), with your direction of
travel at the top.
• Touch North Up to display
the map in 2-D with North at
the top.
• Touch 3-D to display the map
in three dimensions.
62
Choosing Proximity Points
Settings
This option is visible only if you
have proximity points or safety
cameras loaded on your device.
Proximity points include custom
POIs and safety camera databases.
Go to www.garmin.com
/extras for more information.
1. From the main menu, touch Tools
> Settings > Navigation.
2. Select an option: Automobile,
Truck, or RV.
3. Touch Proximity Points.
4. Select an option:
• Touch Alerts to enable alerts
that sound as you approach
proximity points.
• Touch Audio to set the type
of alerts that sound as you
approach proximity points.
dēzl 560 Owner’s Manual
Customizing the Device
Pedestrian Navigation
Settings
From the main menu, touch Tools >
Settings > Navigation > Pedestrian.
• Limit Walking—controls how
much of a public transit route
will include walking.
• Public Transit—avoids selected
transit types.
• Trip Log—displays the path of
your travels on the map.
◦◦ Show on Map—displays the
path of your travels on the
map.
◦◦ Clear Trip Log
Avoiding Transit Types
NOTE: Transit types are available
when cityXplorer maps are loaded
(page 29).
dēzl 560 Owner’s Manual
1. From the main menu, touch
Tools > Settings > Navigation >
Pedestrian > Public Transit.
2. Select the transit type to avoid on
your routes.
3. Touch Save.
Choosing Route
Preferences
1. From the main menu, touch Tools
> Settings > Navigation.
2. Select an option: Automobile,
Truck, or RV.
3. Touch nüRoute > Calculation
Mode.
The route calculation is based
on road speeds and vehicle
acceleration data for a given
route.
63
Customizing the Device
4. Select an option, if available:
• Touch Faster Time to
calculate routes that are faster
to drive but can be longer in
distance.
• Touch Shorter Distance
to calculate routes that are
shorter in distance but can
take more time to drive.
• Touch Less Fuel to calculate
routes that could use less fuel
than other routes.
• Touch Prompted to select a
route calculation mode before
navigating (page 26).
• Touch Off Road to calculate
a direct line from your
location to your destination.
64
Avoiding Road Features
1. From the main menu, touch Tools
> Settings > Navigation.
2. Select an option: Automobile,
Truck, or RV.
3. Touch nüRoute > Avoidances.
4. Select the road features to avoid
on your routes.
5. Touch Save.
Setting Custom Avoidances
You can set specific areas or roads
for your device to avoid when
calculating routes.
1. From the main menu, touch Tools
> Settings > Navigation.
2. Select an option: Automobile,
Truck, or RV.
dēzl 560 Owner’s Manual
Customizing the Device
3. Touch nüRoute > Custom
Avoidances.
4. Select Add Avoid Area or Add
Avoid Road.
5. Follow the on-screen instructions.
About Advanced Detours
When this feature is enabled, the
device calculates a new route based
on specific options you select
(page 27).
Enabling Advanced Detours
1. From the main menu, touch Tools
> Settings > Navigation.
2. Select an option: Automobile,
Truck, or RV.
3. Touch nüRoute > Advanced
Detours.
4. Select Enabled.
dēzl 560 Owner’s Manual
About trafficTrends™
When the trafficTrends feature is
enabled, your device uses historic
traffic information to calculate moreefficient routes. Different routes may
be calculated based on traffic trends
for the day of the week or based on
the time of day.
Enabling trafficTrends
1. From the main menu, touch Tools
> Settings > Navigation.
2. Select an option: Automobile,
Truck, or RV.
3. Touch nüRoute > trafficTrends
> Enabled.
65
Customizing the Device
Display Settings
Language Settings
• Color Mode—sets a light
background (Day), a dark
background (Night), or
automatically switches between
the two based on the sunrise
time and the sunset time for your
current location (Auto).
• Brightness—changes the
brightness of the screen.
Decreasing the brightness can
save battery power.
• Screenshot—allows you to take
a picture of the device screen
(page 48).
• Voice Language—sets the
language for voice prompts.
• Text Language—sets all
on-screen text to the selected
language.
NOTE: Changing the text
language does not change the
language of user-entered data or
map data, such as street names.
• Keyboard Language—sets the
language for your keyboard.
• Keyboard Layout—sets the
keyboard layout to QWERTY
(similar to a computer keyboard)
or alphabetical.
From the main menu, touch Tools >
Settings > Display.
66
From the main menu, touch Tools >
Settings > Language.
dēzl 560 Owner’s Manual
Customizing the Device
Viewing Map Information
From the main menu, touch Tools
> Settings > myMaps.
Enabling Maps
1. From the main menu, touch Tools
> Settings > myMaps.
2. Touch a map.
Bluetooth Settings
From the main menu, touch Tools >
Settings > Bluetooth.
• Add Phone—see page 52.
• Bluetooth—enables the
Bluetooth component.
The Bluetooth icon appears on
the main menu if the Bluetooth
component is turned on.
• Friendly Name—allows you
to enter a friendly name that
identifies your dēzl on devices
with Bluetooth technology.
dēzl 560 Owner’s Manual
Enabling Traffic
The traffic receiver is included in
some device packages.
From the main menu, touch Tools
> Settings > Traffic > Traffic >
Enabled.
About Traffic Subscriptions
You can purchase additional
subscriptions or a renewal if your
subscription expires. Go to
www.garmin.com/fmtraffic.
Viewing Traffic Subscriptions
From the main menu, touch
Tools > Settings > Traffic >
Subscriptions.
Restoring Settings
1. From the main menu, touch Tools
> Settings.
2. If necessary, select a settings
category.
3. Select > Restore > Yes.
67
Appendix
Appendix
Warning Icons
Warning
Entering your vehicle profile
characteristics does not guarantee
that your vehicle's characteristics
will be accounted for in all route
suggestions or that you will receive
the warning icons in all cases.
Limitations may exist in the map
data such that your device cannot
account for these restrictions or road
conditions in all cases. Always defer
to all posted road signs and road
conditions when making driving
decisions.
Restriction Warnings
Height
Weight
Axle Weight
Length
Width
No Trucks Allowed
No Trailers Allowed
No Hazardous
Materials Allowed
No Flammables
Allowed
No Water Pollutants
Allowed
68
dēzl 560 Owner’s Manual
Appendix
No Left Turn
No Right Turn
No U Turn
Road Condition Warnings
Risk of Grounding
Lateral Wind
Narrow Road
Other Warnings
Weigh Station
Road Not Verified for
Trucks
Power Cables
You can use these options to power
your device.
• Vehicle power cable
• USB cable (page 6)
• AC adapter (optional accessory)
Sharp Curve
Steep Down Hill
Tree Overhang
dēzl 560 Owner’s Manual
69
Appendix
Caring for Your Device
Cleaning the Outer Casing
notice
Avoid dropping your device and
operating it in high-shock and highvibration environments.
notice
Avoid chemical cleaners and solvents
that can damage plastic components.
Do not expose the device to water.
Contact with water can cause this
device to malfunction.
Do not store the device where
prolonged exposure to extreme
temperatures can occur, because it
can cause permanent damage.
Never use a hard or sharp object to
operate the touchscreen, or damage
may result.
70
1. Clean the outer casing of the
device (not the touchscreen)
using a cloth dampened with a
mild detergent solution.
2. Wipe the device dry.
Cleaning the Touchscreen
1. Use a soft, clean, lint-free cloth.
2. If necessary, use water, isopropyl
alcohol, or eyeglass lens cleaner.
3. Apply the liquid to the cloth.
4. Gently wipe the screen with the
cloth.
dēzl 560 Owner’s Manual
Appendix
Avoiding Theft
• Remove the device and mount
from sight when not in use.
• Remove the residue left on the
windshield by the suction cup.
• Do not keep your unit in the
glove compartment.
• Register your device at
http://my.garmin.com.
• Use the Garmin Lock™ feature
(page 71).
About Garmin Lock
Garmin Lock is a theft-deterrent
system that locks your device. Each
time you turn on the device, you
must enter the PIN or drive to the
security location.
dēzl 560 Owner’s Manual
About the Security Location
Your security location should be a
location you return to often, such as
your home. If the device has satellite
signals and you are at the security
location, you do not need to enter
the PIN.
NOTE: If you forget your PIN and
your security location, you must
send your device to Garmin to get
it unlocked. You must also send a
valid product registration or proof of
purchase.
Locking the Device
1. From the main menu, touch Tools
> Settings > System > Garmin
Lock > Lock Device.
The Garmin Lock menu appears.
2. Touch Enabled.
3. Enter a 4-digit PIN twice.
4. Drive to a security location.
5. Touch Set.
71
Appendix
Changing Your Garmin Lock
PIN
1. From the Garmin Lock menu,
touch Change PIN.
2. Enter a new 4-digit PIN twice.
Changing Your Security
Location
1. From the Garmin Lock menu,
touch Security Location.
2. Drive to the new security
location.
3. Touch Set.
Erasing User Data
1. Turn on the device.
2. Hold your finger on the lowerright corner of the device screen.
3. Keep your finger pressed until the
pop-up window appears.
4. Touch Yes.
72
All original settings are restored.
Any items that you have saved are
erased.
Battery Information
The
battery icon in the status
bar indicates the status of the internal
battery.
To increase the accuracy of the
battery gauge, fully discharge the
battery and then fully charge it. Do
not unplug the device until it is fully
charged.
Maximizing the Battery Life
• From the main menu, touch
Tools > Settings > Display >
Brightness to turn down the
backlight.
• Do not leave your device in direct
sunlight.
• Avoid prolonged exposure to
excessive heat.
dēzl 560 Owner’s Manual
Appendix
Changing the Fuse in
the Vehicle Power Cable
notice
When replacing the fuse, do not lose
any of the small pieces and make
sure they are put back in the proper
position. The vehicle power cable
does not work unless it is assembled
correctly.
If your device does not charge
in your vehicle, you may need to
replace the fuse located at the tip of
the vehicle adapter.
dēzl 560 Owner’s Manual
1. Use a coin to push down the
silver tip ➊, and turn the coin
counter-clockwise one-quarter
turn.
2. Remove the end piece ➋, the
silver tip, and the fuse ➌.
➌
➋ ➊
3. Install a 2 A fast-blow fuse.
4. Verify that the silver tip is located
in the end piece.
5. Using a coin, replace the end
piece.
73
Appendix
Removing the Device,
Cradle, and Mount
Removing the Device from
the Cradle
1. Press up on the tab on the top of
the cradle.
2. Tilt the device forward.
Removing the Cradle from
the Mount
1. Turn the cradle to the right or
left.
2. Apply pressure until the socket
on the cradle releases the ball on
the mount.
74
Removing the Mounting Arm
from the Mounting Base
1. Slide the locking lever ➊ on the
mounting base ➋ to the unlocked
position.
2. Press the release tab ➌ down.
3. Slide the arm ➍ out of the base.
➍
➊
➋
➌
dēzl 560 Owner’s Manual
Appendix
About nüMaps Lifetime™
For a one-time payment, you can
receive up to four map updates each
year for the life of your device.
For more information on nüMaps
Lifetime and complete terms and
conditions, go to www.garmin.com
/numaps, and click Maps.
Device Models
• Models with “LM” after the
model number include a nüMaps
Lifetime subscription.
• Models with “LT” after the model
number include a lifetime traffic
subscription and a traffic receiver.
• Models with “LMT” after the
model number include a nüMaps
Lifetime subscription, a lifetime
traffic subscription (page 75), and
a traffic receiver.
dēzl 560 Owner’s Manual
Purchasing Additional
Maps
You can purchase additional maps
for your device.
1. Go to your device product page
on the Garmin Web site (www
.garmin.com).
2. Click the Maps tab.
3. Follow the on-screen instructions.
Custom Points of
Interest
Custom POIs are customized points
on the map. They can contain alerts
that let you know if you are near
a designated point or if you are
traveling faster than a specified
speed.
75
Appendix
Installing a POI Loader
You can create or download custom
POI lists and install them on your
device using POI Loader software.
1. Go to www.garmin.com/extras.
2. Click Services > POI Loader.
3. Install the POI Loader onto your
computer.
Using the POI Loader Help Files
For more information on the POI
Loader, refer to the Help file.
With the POI Loader open, click
Help.
Finding Extras
1. From the main menu, touch
Where To? > Extras.
2. Select a category.
76
Safety Cameras
 Caution
Garmin is not responsible for the
accuracy of, or the consequences of
using, a custom point of interest or a
safety camera database.
Safety camera information is
available in some locations. Go to
http://my.garmin.com for availability.
For these locations, the device
includes the locations of hundreds
of safety cameras. Your device alerts
you when you are approaching a
safety camera and can warn you if
you are driving too fast. The data
is updated at least weekly, so you
always have access to the most upto-date information.
dēzl 560 Owner’s Manual
Appendix
You can purchase a new region
or extend an existing subscription
at any time. Each region that you
purchase has an expiration date.
Purchasing Accessories
Go to http://buy.garmin.com.
Contacting Garmin
Product Support
You can contact Garmin Product
Support if you have any questions
about this product.
• In Europe, go to www.garmin
.com/support and click Contact
Support for in-country support
information, or contact Garmin
(Europe) Ltd. by phone at +44 (0)
870.8501241.
Specifications
Operating temperature range:
32°F–140°F (0°C–60°C)
Charging temperature range:
32°F–113°F (0°C–45°C)
• In the USA, go to www.garmin
.com/support, or contact Garmin
USA by phone at (913) 397.8200
or (800) 800.1020.
• In the UK, contact Garmin
(Europe) Ltd. by phone at 0808
2380000.
dēzl 560 Owner’s Manual
77
Appendix
Troubleshooting
Problem
My device is not
acquiring satellite
signals.
The device does not
charge in my vehicle.
Solution
• Verify that the GPS simulator is turned off.
• From the main menu, touch Tools > Settings >
System > GPS Simulator > Off.
• Take your device out of parking garages and away
from tall buildings and trees.
• Remain stationary for several minutes.
• Check the fuse in the vehicle power cable
(page 73).
• Verify the vehicle is turned on and is supplying
power to the power outlet.
• Your device can only charge between 32°F and
113°F (between 0°C and 45°C). If the device is
placed in direct sunlight or in a hot environment, it
cannot charge.
To maximize the time between charges, turn down the
backlight (page 66).
My battery does not
stay charged for very
long.
How do I clear all of
See page 72.
my user data?
My battery gauge does Allow the unit to fully discharge, and fully charge it
not seem accurate.
(without interrupting the charge cycle).
78
dēzl 560 Owner’s Manual
Appendix
How do I know my
When your device is in USB mass storage mode, a
device is in USB mass picture of a device connected to a computer is shown
storage mode?
on the device screen. Also, you should see two new
removable disk drives listed in My Computer.
The device is
1. Disconnect the USB cable from your computer.
connected to the
2. Turn off the device.
computer, but it will not 3. Plug the USB cable into a USB port on your
go into mass storage
computer and into your device.
mode.
The device automatically turns on and goes into
USB mass storage mode.
4. Verify your device is connected to a USB port and
not a USB hub.
I cannot see any new If you have several network drives mapped on your
removable drives in my computer, Windows can have trouble assigning drive
list of drives.
letters to your device drives. Refer to your operating
system Help file to learn how to map or assign drive
letters.
My phone will not
• From the main menu, touch Tools > Settings
connect to the device.
> Bluetooth. The Bluetooth field must be set to
Enabled.
• Your phone must be turned on and be less than
33 feet (about 10 meters) away from your device.
• Go to www.garmin.com/bluetooth for more help.
dēzl 560 Owner’s Manual
79
Index
Index
Numbers
2-D, 3-D map view 62
A
accessories 77
acquiring satellite signals
7, 7–8
addresses, finding 12
adhesive pad 3–5
advanced detours 65
anti-theft feature 71
avoiding
areas and roads 64–65
public transit types 63
road features 64
theft 71, 71–72
traffic 32
B
backup camera 11
battery
heat and 1
information 72
80
life 72, 78
Bluetooth technology
50–54
pairing with a phone
50–52
settings 67
brightness, adjusting 8
businesses and attractions,
finding 15–17
buttons, on-screen 10
C
calculator 48
calls
answering 52
call waiting 53
hanging up 52
home 54
making 53
muting 53
to businesses 53
voice dial 54
cameras
backup 11
safety 76–77
caring for your device
70–71
changing the fuse 73
charging your device 78
cityXplorer maps 29, 63
cleaning your device 6, 70
clearing. See deleting
clock 48
computer, connecting
to 6–7
converting
currency 49
units of measure
48–49
coordinates 19
cradle, removing 74
current location 43
current location, saving 18
customized main menu
settings 58–59
custom points of interest
75–76
custom points of interest,
safety cameras and 76
dēzl 560 Owner’s Manual
Index
D
dash mount 3–5
deleting
favorites 19
files 57
recently found
locations 17
user data 72
destinations, multiple
20–21
detours
advanced 65
taking 27–28
device
care 70–71
charging 78
help 43
pairing with a phone
50–52
protecting 70–71
registering 6
removing 74
resetting 8
device settings, Bluetooth
and 51
dēzl 560 Owner’s Manual
display settings 66
drivers, truck 40
driving directions 25
driving logs 39
exporting 42
viewing exported 42
duty status 39
E
ecoRoute
calibrating fuel
economy 44
ecoChallenge score 45
fuel economy
information 45
mileage report 46
tips 46
vehicle profile 46
end user license
agreements 58
erasing. See deleting
exit services 14
exporting
driving logs 42
jurisdiction summaries
36–37
trip reports 37
extras 75
F
favorites 17–19
deleting 19
editing 18
finding 18
saving locations to 18
saving your current
location to 18
files
deleting 57
supported types 55
friction mount 2–3
fuel
data 35–36
finding 43
logs 36
fuel economy, calibrating
44
fuel economy information
45
81
Index
fuse, changing 73
G
Garmin Lock 71–72
Garmin Product Support
77
geocaching 19
GPS
satellite signals 7–8
settings 58
simulator 21, 58
guarantee, nuMaps 6
H
help 43
home
calling 54
editing location
information 15
navigating 14
phone number 54
resetting the location
15
setting a location 14
hospitals 43
hours of service 38–42
82
drivers 40
driving logs 39, 42
duty status 39
regulations 38
shipments 40–41
I
IFTA (International Fuel
Tax Agreement) 35
IFTA logging 35–38
exported summaries
and reports 38
fuel data 35–36
fuel logs 36
jurisdiction summary
36–37
trip reports 37–38
Important Safety and
Product Information
guide 1, 5
installing the mount 1–5
International Fuel Tax
Agreement (IFTA) 35
J
JPEG image files 55
junction view 26
jurisdiction summary
36–37
K
keyboard 10
L
language settings 66
latitude and longitude 19
lithium-ion battery 1, 72
loading pictures 15–19
location, current 43
location map options
12–13
location, security 71
locations, finding
addresses 12
businesses and
attractions 15–17
coordinates 19
home 14
recently found 17
saved locations
(favorites) 18
dēzl 560 Owner’s Manual
Index
trucking points of
interest 14–19
using photos 15–17
using the map 13
locations, saving to
favorites 18
locking the device 71
logs
driving 38, 39
fuel 36
M
main menu 9
customizing 58–59
default 59
editing 59
maps
adding 75
cityXplorer 29, 63
errors 16
information 67
location 12–13
navigation 23
pedestrian 28–29
purchasing 75
dēzl 560 Owner’s Manual
settings 61–62
updating 7
MapSource 55, 75
mass storage mode 55–57,
79
measurements, converting
48–49
memory cards 55–56
memory card slot 8
micro-B connector 6–7
microSD card slot 8
mileage reports 46
modes, transportation 11
mounting the device
installing 1–5
removing from mount
74
mounts
dash 3–5
friction 2–3
removing 74
multiple destinations
20–21
muting
audio 9
phone calls 53
myDashboard 6–7
myMaps settings 67
myTrends 28
N
National Truck and Trailer
Services (NTTS) 13
navigation
maps 23
off road 64
pedestrian 28
photo 15–19
navigation settings
pedestrian 63
vehicle 61–62
nearby services 43
next turn 25
NTTS (National Truck
and Trailer Services)
13
nüMaps guarantee 6
nüMaps Lifetime 75
O
offers (ad-based)
83
Index
disabling 34
viewing 34
off-road navigation 64
on-screen buttons 10
P
pad, adhesive 3–4
pairing a mobile phone
50–52
pedestrian maps 28–29
pedestrian mode, settings
63
phone, pairing 50–52
phone settings, Bluetooth
and 50–51
phone status 54
photo navigation 15–19
picture viewer 47
PIN
Bluetooth 51
Garmin Lock 71
POI loader 55
POI loader software 76
points of interest
calling 53
84
custom 75–76
finding 15–17
rating 17
removing incorrect 16
reporting incorrect 16
trucking 14
police stations 43
portable friction mount
2–3
power cables 69
power key 8
predictive routing 28
present location 43
present location, saving 18
product support 77
profiles
truck or RV 7, 60–61
vehicle (ecoRoute) 46
protecting your device
70–71
public transit
avoidances 63
city maps 29
purchasing maps 75
R
rating points of interest 16
recalculating routes
detours 27–28
traffic 32
receiver, traffic 30–34
recently found locations
17
registering the device 6
regulations, hours of
service 38
removing incorrect points
of interest 16
removing the device,
cradle, and mount 74
reports
mileage 46
trip 37–38
resetting
device 8
home location 15
trip information 24
restoring settings 67
restrictions, vehicle 7, 60
reverse camera 11
dēzl 560 Owner’s Manual
Index
route preferences 26–28
routes. See trips
route settings 63–65
RV
profiles 7, 60–61
settings 61–62
S
safe mode 58
safety cameras 76–77
satellite signals 7, 7–8
saved locations.
See favorites
saving
found locations 18
your current location
18
school zone database 75
score, ecoChallenge 45
screen
brightness 8, 66
buttons 10
keyboard 10
screenshots 48
search area 17
dēzl 560 Owner’s Manual
search area, changing 19
security
Garmin Lock 71–72
location 71
theft, avoiding 71
security location 71
services
exit 14
nearby 43
NTTS 13
settings
Bluetooth 67
customized main
menu 58–59
display 66
GPS 58
language 66
map 61–62, 67
navigation, pedestrian
63
navigation, vehicle
61–62
restoring 67
route 63–65
simulator 21, 58
system 58
traffic 67
truck or RV 60–61
shipments 40–41
simulator 21, 58
software
information 58
updating 6
version 58
specifications 77
speed limit feature 22
status, duty 39
storing the device 70
subscriptions, traffic
30, 67
support 77
system settings 58
T
theft, avoiding 71
tips
Bluetooth 51–52
driving 46
troubleshooting 78–79
85
Index
traffic
avoiding 32
icons 31
receiver 30–34
route recalculation 32
settings 67
subscriptions 30, 67
trafficTrends 65
traffic information,
accuracy and
availability 30
transportation modes 11
trip information
resetting 24
viewing 24
trip reports 37–38
trips 20–21
troubleshooting 78–79
truck
drivers 40
profiles 7, 60–61
settings 61–62
shipments 40–41
speed limits 22
86
trucking points of interest
14–19
turn-by-turn directions 25
turn, next 25
U
unit converter 48–49
unit ID 58
USB connector
cradle 2, 4
device 6
traffic receiver 30
USB mass storage mode
55–57, 79
user data, deleting 72
volume 11
W
wallpaper 47
warning icons, truck and
RV 68–69
warnings, product 1
windshield mounting 5
world clock, world map
48
V
vehicle profiles
ecoRoute 46
truck or RV 7, 60–61
vehicle restrictions 7, 60
version information 58
viewing
junctions 26
trip information 24
voice dial 54
dēzl 560 Owner’s Manual
For the latest free software updates (excluding map data) throughout the life of
your Garmin products, visit the Garmin Web site at www.garmin.com.
© 2011 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151st Street, Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
No. 68, Jangshu 2nd Road, Sijhih, Taipei County, Taiwan
www.garmin.com
January 2011
Part Number 190-01280-00 Rev. A
Printed in Taiwan
Download PDF

advertising