Garmin 920XT Wheelchair User Manual

Forerunner 920XT
®
Owner’s Manual
September 2014
Printed in Taiwan
190-01765-00_0A
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Garmin®, the Garmin logo, ANT‍+®, Auto Lap®, Auto Pause®, Forerunner®, and Virtual Partner® are trademarks of Garmin Ltd.‍ or its subsidiaries, registered
in the USA and other countries.‍ Garmin Connect™, Garmin Express™, HRM‍-‍Run™, Vector™, and VIRB™ are trademarks of Garmin Ltd.‍ or its subsidiaries.‍
These trademarks may not be used without the express permission of Garmin.‍
Android™ is a trademark of Google, Inc.‍ The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.‍ and any use of such marks by Garmin is
under license.‍ The Cooper Institute®, as well as any related trademarks, are the property of The Cooper Institute.‍ Firstbeat® and Analyzed by Firstbeat are
registered or unregistered trademarks of Firstbeat Technologies Ltd.‍ iOS® is a registered trademark of Cisco Systems, Inc.‍ used under license by Apple Inc.‍
Mac® is a registered trademark of Apple Computer, Inc.‍ Training Stress Score™ (TSS), Intensity Factor™ (IF), and Normalized Power™ (NP) are trademarks
of Peaksware, LLC.‍ Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.‍ Wi‑Fi® is a registered mark of WiFi Alliance Corporation.‍ Other trademarks and trade names are those of their respective owners.‍
This product is ANT‍+® certified.‍ Visit www.thisisant.com/‍directory for a list of compatible products and apps.‍
M/N: F4XRGT00
Table of Contents
Deleting a Course .................................................................. 8
Stopping Navigation ................................................................... 8
Introduction.................................................................... 1
ANT‍+ Sensors................................................................ 8
Keys ........................................................................................... 1
Status Icons ........................................................................... 1
Going for a Run .......................................................................... 1
Charging the Device ................................................................... 1
Saving Time with the Shortcut Menu .......................................... 1
Putting On the Heart Rate Monitor ............................................. 8
Running Dynamics ................................................................ 8
About VO2 Max.‍ Estimates ................................................... 9
Recovery Advisor ................................................................ 10
Setting Your Heart Rate Zones ........................................... 10
Pairing Your ANT‍+ Sensors ..................................................... 10
Foot Pod ................................................................................... 11
Going for a Run Using a Foot Pod ...................................... 11
Foot Pod Calibration ............................................................ 11
Training with Power Meters ...................................................... 11
Setting Your Power Zones ................................................... 11
VIRB Remote ........................................................................... 11
Controlling a VIRB Action Camera ...................................... 11
Training........................................................................... 2
Multisport Activities ..................................................................... 2
Changing Activity Profiles During an Activity ......................... 2
Triathlon Training ....................................................................... 2
Swimming ................................................................................... 2
Swimming with Your Forerunner ........................................... 2
Swimming in Open Water ...................................................... 3
Activity Tracking ......................................................................... 3
Turning On Activity Tracking ................................................. 3
Using the Move Alert ............................................................. 3
Auto Goal ............................................................................... 3
Sleep Tracking ....................................................................... 3
Training Indoors ......................................................................... 3
Workouts .................................................................................... 3
Following a Workout From the Web ...................................... 3
Starting a Workout ................................................................. 3
About the Training Calendar .................................................. 4
Interval Workouts ....................................................................... 4
Creating an Interval Workout ................................................. 4
Starting an Interval Workout .................................................. 4
Stopping a Workout ............................................................... 4
Viewing Your Predicted Race Times .......................................... 4
Using Virtual Partner .................................................................. 4
Setting a Training Target ............................................................ 4
Cancelling a Training Target ................................................. 5
Racing a Previous Activity .......................................................... 5
Personal Records ....................................................................... 5
Viewing Your Personal Records ............................................ 5
Restoring a Personal Record ................................................ 5
Clearing a Personal Record .................................................. 5
Clearing All Personal Records ............................................... 5
History............................................................................. 5
Viewing History ........................................................................... 5
Multisport History ................................................................... 5
Swim History .......................................................................... 5
Viewing Your Time in Each Heart Rate Zone ........................ 5
Viewing Data Totals ................................................................... 5
Deleting History .......................................................................... 5
Data Management ...................................................................... 6
Deleting Files ......................................................................... 6
Disconnecting the USB Cable ............................................... 6
Garmin Connect ......................................................................... 6
Using Garmin Connect .......................................................... 6
Bluetooth Connected Features .............................................. 6
Wi‑Fi Connected Features ..................................................... 6
Navigation....................................................................... 7
Adding the Map .......................................................................... 7
Map Features ............................................................................. 7
Marking Your Location ............................................................... 7
Viewing Your Current Elevation and Coordinates ................. 7
Editing a Location .................................................................. 7
Deleting a Location ................................................................ 7
Navigating to a Saved Location .................................................. 7
Navigating Back to Start ............................................................. 7
Courses ...................................................................................... 7
Following a Course From the Web ........................................ 7
Viewing Course Details ......................................................... 8
Table of Contents
Customizing Your Device ............................................ 11
Setting Up Your User Profile .................................................... 11
Activity Profiles ......................................................................... 11
Changing Your Activity Profile ............................................. 11
Creating a Custom Activity Profile ....................................... 11
Deleting an Activity Profile ................................................... 12
Activity Settings ........................................................................ 12
Customizing the Data Screens ............................................ 12
Alerts ................................................................................... 12
Running with the Metronome ............................................... 12
Using Auto Pause® ............................................................. 12
Auto Lap .............................................................................. 13
Customizing the Lap Alert Message .................................... 13
Using Auto Scroll ................................................................. 13
Using UltraTrac Mode .......................................................... 13
Power Save Timeout Settings ............................................. 13
Activity Tracking Settings ......................................................... 13
Phone Notifications .................................................................. 13
Enabling Bluetooth Notifications .......................................... 13
Viewing Notifications ........................................................... 13
Managing Notifications ........................................................ 13
System Settings ....................................................................... 13
Changing the Device Language .......................................... 13
Time Settings ....................................................................... 13
Backlight Settings ................................................................ 14
Setting the Device Sounds .................................................. 14
Changing the Units of Measure ........................................... 14
Changing the Satellite Setting ............................................. 14
Format Settings ................................................................... 14
Data Recording Settings ...................................................... 14
Device Information ....................................................... 14
Specifications ........................................................................... 14
Forerunner Specifications .................................................... 14
HRM‍-‍Run Specifications ..................................................... 14
Device Care .............................................................................. 14
Cleaning the Device ............................................................ 14
Caring for the Heart Rate Monitor ....................................... 14
User Replaceable Batteries ................................................. 14
Troubleshooting........................................................... 15
Support and Updates ............................................................... 15
Getting More Information .......................................................... 15
Acquiring Satellite Signals ........................................................ 15
Improving GPS Satellite Reception .......................................... 15
Resetting the Device ................................................................ 15
Clearing User Data ................................................................... 15
Restoring All Default Settings ................................................... 15
Viewing Device Information ...................................................... 15
Updating the Software .............................................................. 15
Maximizing Battery Life ............................................................ 15
i
My daily step count does not appear ........................................ 16
Appendix....................................................................... 16
Heart Rate Zone Calculations .................................................. 16
VO2 Max.‍ Standard Ratings ..................................................... 16
Wheel Size and Circumference ................................................ 16
Software License Agreement ................................................... 17
Index.............................................................................. 18
ii
Table of Contents
Introduction
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.‍
Always consult your physician before you begin or modify any
exercise program.‍
1 Hold to turn on the device.‍
2 Select and to view the activity profiles.‍
3 Select ENTER.‍
The timer screen for the selected activity profile appears.‍
Keys
4 Go outside, and wait while the device locates satellites.‍
5
6
7
8
It may take a few minutes.‍ The satellite bars turn green when
the device is ready.‍
Select
to start the timer.‍
Start your activity.‍
After you complete your activity, select
to stop the timer.‍
Select Save to save the activity and reset the timer.‍
A summary appears.‍ You can upload your activity to your
Garmin Connect account (Garmin Connect).‍
Charging the Device
Select to turn the backlight on and off.‍
Hold to turn the device on and off.‍
À
Select to scroll through activity profiles, menus, details,
and settings.‍
Hold to scroll quickly through the settings.‍
Select to scroll through data screens during an activity.‍
Á
Â
Select to start and stop the timer.‍
ENTER Select to choose an option and to acknowledge a
message.‍
Ã
BACK
Ä
Select to mark a new lap.‍
Select to mark a transition during a multi-sport activity.‍
Select to mark a rest period during a swim.‍
Select to return to the previous screen.‍
Select multiple times to return to the time of day screen
and lock the device.‍
WARNING
This device contains a lithium-ion battery.‍ See the Important
Safety and Product Information guide in the product box for
product warnings and other important information.‍
NOTICE
To prevent corrosion, thoroughly dry the contacts and the
surrounding area before charging or connecting to a computer.‍
1 Plug the USB cable into a USB port on your computer.‍
2 Align the charger posts with the contacts on the back of the
device, and connect the charging clip À securely to the
device.‍
Select to unlock the device.‍
Select to switch between the activity profile screen, main
menu, and timer screen.‍
Hold to send your activity to your Garmin Connect™
account.‍
Status Icons
Icons appear at the top of the activity profile and data screens.‍ A
flashing icon means the device is searching for a signal.‍ A solid
icon means the signal was found or the sensor is connected.‍
GPS status
Bluetooth® technology status
Wi‑Fi® technology status
Heart rate status
Foot pod status
Speed and cadence status
Power status
VIRB™ camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity.‍ The device comes partially
charged.‍ You may need to charge the device (Charging the
Device) before starting the activity.‍
Introduction
3 Charge the device completely.‍
4 Press Á to remove the charger.‍
Saving Time with the Shortcut Menu
The device has shortcut menu options available for various data
screens and accessory features.‍
NOTE: Some shortcut menu options require optional
accessories.‍
1 Hold to view the shortcut menu options.‍
2 Select an option:
1
Wi‑Fi technology
You can send activities to your Garmin
Connect account.‍
Swimming
Data screens
You can edit data fields.‍
Workout screen
You can cancel the workout.‍
Metronome screen
You can mute the metronome and edit the
settings.‍
NOTICE
The device is intended for surface swimming.‍ Scuba diving with
the device may damage the product and will void the warranty.‍
Virtual Partner® screen You can edit the pace or speed.‍
Training target screen
You can cancel the training target.‍
Racing an activity
You can cancel the race.‍
Map screen
You can access navigation features
including Back to Start and Save Location.‍
Navigation screen
(compass)
You can stop navigation.‍
Running dynamics
screen
You can change the primary metric.‍
Power meter
You can calibrate the power meter.‍
VIRB action camera
You can control the camera.‍
Training
Multisport Activities
Triathletes, duathletes, and other multisport competitors can
take advantage of the custom multisport profiles (Creating a
Custom Activity Profile).‍ When you set up a multisport profile,
you can switch between sport modes and still view your total
time for all sports.‍ For example, you can switch from biking
mode to running mode and view your total time for biking and
running throughout your workout.‍
Changing Activity Profiles During an Activity
You can begin a multisport activity using one activity profile and
manually switch to another activity profile without stopping the
timer.‍
1 Select , and select an activity profile for your first sport
segment.‍
2 Select , and start the activity.‍
3 When you are ready for the next sport segment, select ,
and select a different activity profile.‍
NOTE: If you are switching from an indoor segment to an
outdoor segment, allow the device time to locate satellites.‍
4 After you complete your sport segments, select to stop the
timer.‍
5 Select Save to save the multisport activity and reset the
timer.‍
A summary appears including an overall summary of the
multisport activity and details about each sport segment.‍
Triathlon Training
When you participate in a triathlon, you can use the triathlon
activity profile to quickly transition to each sport segment.‍
1 Select > > Triathlon > ENTER.‍
2 Select to start the timer.‍
at the beginning and end of each transition.‍
3 Select
4 After you complete your activity, select > Save.‍
2
NOTE: The device cannot record heart rate data while
swimming.‍
Swimming with Your Forerunner
You can use the pool swim activity profile to record your swim
data including distance, pace, stroke count, and stroke type.‍
1 Select > > Pool Swim > ENTER.‍
2 Select to start the timer.‍
at the beginning and end of each rest period.‍
3 Select
4 After you complete your activity, select > Save.‍
Swim Terminology
Length: One trip down the pool.‍
Interval: One or more consecutive lengths.‍ A new interval starts
after a rest.‍
Stroke: A stroke is counted every time your arm wearing the
device completes a full cycle.‍
Swolf: Your swolf score is the sum of the time for one pool
length and the number of strokes for that length.‍ For
example, 30 seconds plus 15 strokes equals a swolf score of
45.‍ For open water swimming, swolf is calculated over 25
meters.‍ Swolf is a measurement of swimming efficiency and,
like golf, a lower score is better.‍
Stroke Types
Stroke type identification is available only for pool swimming.‍
Your stroke type is identified at the end of a length.‍ Stroke types
appear when you are viewing interval history.‍ You can also
select stroke type as a custom data field (Customizing the Data
Screens).‍
Free
Freestyle
Back
Backstroke
Breast
Breaststroke
Fly
Butterfly
Mixed
More than one stroke type in an interval
Drill
Used with drill logging (Training with the Drill Log)
Resting During Pool Swimming
The default rest screen displays two rest timers.‍ It also displays
time and distance for the last completed interval.‍ The rest
screen can be customized or turned off.‍
NOTE: Swim data is not recorded during a rest.‍
to start a rest.‍
1 During your swim activity, select
The display reverses to white text on a black background,
and the rest screen appears.‍
2 During a rest, select to view other data screens (optional).‍
, and continue swimming.‍
3 Select
4 Repeat for additional rest intervals.‍
Training with the Drill Log
The drill log feature is available only for pool swimming.‍ You can
use the drill log feature to manually record kick sets, one-arm
swimming, or any type of swimming that is not one of the four
major strokes.‍ The drill time is recorded, and you must enter the
distance.‍
TIP: You can customize the data screens and data fields for
your pool swim activity profile (Customizing the Data Screens).‍
1 Select > > Pool Swim > ENTER.‍
2 During your pool swim activity, select to view the drill log
screen.‍
to start the drill timer.‍
3 Select
Training
4 After completing a drill interval, select
.‍
The drill timer stops, but the activity timer continues to record
the entire swim session.‍
5 Select a distance for the completed drill.‍
Distance increments are based on the pool size selected for
the activity profile.‍
6 Select an option:
• To start another drill interval, select
.‍
• To start a swim interval, select to return to the swim
training screens.‍
7 After you complete your activity, select > Save.‍
If you choose not to use the auto goal feature, you can set a
personalized step goal on your Garmin Connect account.‍
Sleep Tracking
Swimming in Open Water
During sleep mode, the device monitors your rest.‍ Sleep
statistics include total hours of sleep, periods of movement, and
periods of restful sleep.‍
You can use the device for open water swimming.‍ You can
record swim data including distance, pace, and stroke rate.‍ You
can add data screens to the default open water swimming
activity profile (Customizing the Data Screens) or create your
own profile (Creating a Custom Activity Profile).‍
1 Select > > Open Water > ENTER.‍
2 Go outside and wait while the device locates satellites.‍
It may take a few minutes.‍ The satellite bars turn green when
the device is ready.‍
3 Select to start the timer.‍
4 After you complete your activity, select > Save.‍
Using Sleep Mode
Before you can use sleep tracking, you must be wearing the
device.‍
1 From the time of day screen, select to view the activity
tracking details.‍
2 Hold to view the shortcut menu.‍
3 Select Start Sleep Mode.‍
4 When you wake, select ENTER > Yes to exit sleep mode.‍
NOTE: If you forget to put the device into sleep mode, you
can enter your sleep and wake times manually into your
Garmin Connect account to recover your sleep statistics.‍
Activity Tracking
Training Indoors
Turning On Activity Tracking
The device includes indoor activity profiles for running, cycling,
and swimming.‍ You can turn off GPS when you are training
indoors or to save battery life.‍
NOTE: Any change to the GPS setting is saved to the active
profile.‍
Select > Activity Settings > GPS > Off.‍
When running with GPS turned off, speed and distance are
calculated using the accelerometer in the device.‍ The
accelerometer is self-calibrating.‍ The accuracy of the speed
and distance data improves after a few outdoor runs using
GPS.‍
The activity tracking feature records your daily step count, step
goal, distance traveled, and calories burned for each recorded
day.‍ Your calories burned includes your base metabolism plus
activity calories.‍
Activity tracking can be enabled during the initial device setup,
or at any time.‍
Select > Settings > Activity Tracking > Status > On.‍
Your step count does not appear until the device locates
satellites and sets the time automatically.‍ The device may
need a clear view of the sky to locate satellite signals.‍
Your total number of steps taken during the day appears
beneath the time of day .‍ The step count is updated
periodically.‍
TIP: From the time of day screen, you can select to view
additional activity tracking data.‍
Using the Move Alert
You must turn on activity tracking before you can use the move
alert.‍
Sitting for prolonged periods of time can trigger undesirable
metabolic state changes.‍ The move alert reminds you to keep
moving.‍ After one hour of inactivity, Move! and the red bar
appear.‍ The device also beeps or vibrates if audible tones are
turned on (Setting the Device Sounds).‍
Go for a short walk (at least a couple of minutes) to reset the
move alert.‍
Auto Goal
Your device creates a daily step goal automatically, based on
your previous activity levels.‍ As you move during the day, the
device shows your progress toward your daily goal À.‍
Workouts
You can create custom workouts that include goals for each
workout step and for varied distances, times, and calories.‍ You
can create workouts using Garmin Connect or select a training
plan that has built-in workouts from Garmin Connect, and
transfer them to your device.‍
You can schedule workouts using Garmin Connect.‍ You can
plan workouts in advance and store them on your device.‍
Following a Workout From the Web
Before you can download a workout from Garmin Connect, you
must have a Garmin Connect account (Garmin Connect).‍‍
1 Connect the device to your computer.‍
2 Go to www.garminconnect.com/‍workouts.‍
3 Create and save a new workout.‍‍
4 Select Send to Device, and follow the on-screen
instructions.‍‍
5 Disconnect the device.‍
Starting a Workout
Before you can start a workout, you must download a workout
from your Garmin Connect account.‍
1 Select > Training > My Workouts.‍‍
2 Select a workout.‍
3 Select Do Workout.‍
Training
3
After you begin a workout, the device displays each step of the
workout, the target (if any), and current workout data.‍‍
About the Training Calendar
The training calendar on your device is an extension of the
training calendar or schedule you set up in Garmin Connect.‍
After you have added a few workouts to the Garmin Connect
calendar, you can send them to your device.‍ All scheduled
workouts sent to the device appear in the training calendar list
by date.‍ When you select a day in the training calendar, you can
view or do the workout.‍ The scheduled workout stays on your
device whether you complete it or skip it.‍ When you send
scheduled workouts from Garmin Connect, they overwrite the
existing training calendar.‍
Using Garmin Connect Training Plans
Before you can download and use a training plan from Garmin
Connect, you must have a Garmin Connect account (Garmin
Connect).‍‍
You can browse Garmin Connect to find a training plan,
schedule workouts and courses, and download the plan to your
device.‍
1 Connect the device to your computer.‍
2 Go to www.garminconnect.com.‍
3 Select and schedule a training plan.‍
4 Review the training plan in your calendar.‍
5 Select , and follow the on-screen instructions.‍‍
Interval Workouts
You can create interval workouts based on distance or time.‍ The
device saves your custom interval workout until you create
another interval workout.‍ You can use open intervals for track
workouts and when you are running a known distance.‍ When
you select
, the device records an interval and moves to a
rest interval.‍
Viewing Your Predicted Race Times
Before you can view your projected race times (running only),
you must put on a heart rate monitor and pair it with your device.‍
For the most accurate estimate, complete the user profile setup
(Setting Up Your User Profile), and set your maximum heart rate
(Setting Your Heart Rate Zones).‍
Your device uses the VO2 max.‍ estimate (About VO2 Max.‍
Estimates) and published data sources to provide a target race
time based on your current state of fitness.‍ This projection also
presumes you have completed the proper training for the race.‍
NOTE: The projections may seem inaccurate at first.‍ The device
requires a few runs to learn about your running performance.‍
1 Put on your heart rate monitor, and go for a run.‍
2 Select > My Stats > Race Predictor.‍
Your projected race times appear for 5K, 10K, half marathon,
and marathon distances.‍
Using Virtual Partner
Your Virtual Partner is a training tool designed to help you meet
your goals.‍ You can customize the Virtual Partner to train (run,
bike, other) at a target speed or pace.‍
NOTE: Virtual Partner is not available in swim mode.‍
1 Select an activity profile.‍
2 Select > Activity Settings > Data Screens > Virtual
Partner > Status > On.‍
3 Select Set Pace or Set Speed.‍
You can use pace or speed as your format (Format Settings).‍
4 Enter a value.‍
5 Select to start the timer.‍
6 During your activity, select or to view the Virtual Partner
screen and see who is leading.‍
Creating an Interval Workout
1 Select > Training > Intervals > Edit > Interval > Type.‍
2 Select Distance, Time, or Open.‍
3
4
5
6
7
TIP: You can create an open-ended interval by setting the
type to Open.‍
Select Duration, enter a distance or time interval value for
the workout, and select .‍
Select Rest > Type.‍
Select Distance, Time, or Open.‍
If necessary, enter a distance or time value for the rest
interval, and select .‍
Select one or more options:
• To set the number of repetitions, select Repeat.‍
• To add an open-ended warm up to your workout, select
Warm Up > On.‍
• To add an open-ended cool down to your workout, select
Cool Down > On.‍
Starting an Interval Workout
1 Select > Training > Intervals > Do Workout.‍
2 Select .‍
3 When your interval workout has a warm up, select
to
begin the first interval.‍
4 Follow the on-screen instructions.‍
When you complete all of the intervals, a message appears.‍
Stopping a Workout
• At any time, select
• At any time, select
4
to end a workout step.‍
to stop the timer.‍
Setting a Training Target
The training target feature works with the Virtual Partner feature
so you can train toward a set distance, distance and time,
distance and pace, or distance and speed goal.‍ This feature can
be used with the running, cycling, and other single sport activity
profiles (excludes swimming).‍ During your training activity, the
device gives you real-time feedback about how close you are to
achieving your training target.‍
1 Select > Training > Set a Target.‍
2 Select an option:
• Select Distance Only to select a preset distance or enter
a custom distance.‍
• Select Distance and Time to select a distance and time
target.‍
The time target can be entered manually, use prediction
(based on your VO2 max.‍ estimate), or use your personal
record time.‍
• Select Distance and Pace or Distance and Speed to
select a distance and pace or speed target.‍
The training target screen appears indicating your estimated
finish time.‍ Estimated finish time is based on your current
performance and the time remaining.‍
3 Select to start the timer.‍
4 If necessary, select to view the Virtual Partner screen.‍
Training
5 After you complete your activity, select
> Save.‍
A summary screen appears indicating that you finished
ahead of or behind the target.‍
Cancelling a Training Target
1 During the activity, select to view the target screen.‍
2 Hold .‍
3 Select Cancel Target > Yes.‍
Racing a Previous Activity
You can race a previously recorded or downloaded activity.‍ This
feature can be used with the running, cycling, and other single
sport activity profiles (excludes swimming).‍ This feature works
with the Virtual Partner feature so you can see how far ahead or
behind you are during the activity.‍
1 Select > Training > Race an Activity.‍
2 Select an option:
• Select From History to select a previously recorded
activity from your device.‍
• Select Downloaded to select an activity you downloaded
from your Garmin Connect account.‍
3 Select the activity.‍
The Virtual Partner screen appears indicating your estimated
finish time.‍
4 Select to start the timer.‍
5 After you complete your activity, select > Save.‍
A summary screen appears indicating that you finished the
race ahead of or behind the previously recorded or
downloaded activity.‍
Personal Records
When you complete an activity, the device displays any new
personal records you achieved during that activity.‍ Personal
records include your fastest time over several typical race
distances and longest run or ride.‍ For cycling, personal records
also include most ascent and best power (power meter
required).‍
Viewing Your Personal Records
1 Select > My Stats > Records.‍
2 Select a sport.‍
3 Select a record.‍
4 Select View Record.‍
Restoring a Personal Record
You can set each personal record back to the one previously
recorded.‍
1 Select > My Stats > Records.‍
2 Select a sport.‍
3 Select a record to restore.‍
4 Select Previous > Yes.‍
NOTE: This does not delete any saved activities.‍
Clearing a Personal Record
1 Select > My Stats > Records.‍
2 Select a sport.‍
3 Select a record to delete.‍
4 Select Clear Record > Yes.‍
NOTE: This does not delete any saved activities.‍
Clearing All Personal Records
1 Select > My Stats > Records.‍
NOTE: This does not delete any saved activities.‍
2 Select a sport.‍
History
3 Select Clear All Records > Yes.‍
The records are deleted only for that sport.‍
History
History includes time, distance, calories, average pace or
speed, lap data, and optional ANT‍+® sensor information.‍
NOTE: When the device memory is full, your oldest data is
overwritten.‍
Viewing History
1 Select > History > Activities.‍
2 Select an activity.‍
3 Select an option:
• Select Details to view additional information about the
activity.‍
• Select Laps to select a lap and view additional information
about each lap.‍
• Select Map to view the activity on a map.‍
• Select Delete to delete the selected activity.‍
Multisport History
Your device stores the overall multisport summary of the
activity, including overall distance, time, calories, and optional
accessory data.‍ Your device also separates the activity data for
each sport segment and transition so you can compare similar
training activities and track how quickly you move through the
transitions.‍ Transition history includes distance, time, average
speed, and calories.‍
Swim History
Your device stores the swim summary and details for each
interval or lap.‍ The pool swim history displays the stroke type,
distance, time, pace, calories, strokes per length, stroke rate,
and swolf score.‍ If the interval contains more than one length,
the activity history also contains the number of lengths, stroke
type, and time.‍ The open water swim history displays the
distance, time, pace, calories, stroke distance, and stroke rate.‍
Viewing Your Time in Each Heart Rate Zone
Before you can view heart rate zone data, you must pair your
device with a compatible heart rate monitor, complete an
activity, and save the activity.‍
Viewing your time in each heart rate zone can help you adjust
your training intensity.‍
1 Select > History > Activities.‍
2 Select an activity.‍
3 Select Time in Zone.‍
Viewing Data Totals
You can view the accumulated distance and time data saved to
your device.‍
1 Select > History > Totals.‍
2 If necessary, select the activity type.‍
3 Select an option to view weekly or monthly totals.‍
Deleting History
1 Select > History > Options.‍
2 Select an option:
• Select Delete All Activities to delete all activities from the
history.‍
• Select Reset Totals to reset all distance and time totals.‍
NOTE: This does not delete any saved activities.‍
Confirm your selection.‍
3
5
NOTE: The device is not compatible with Windows® 95, 98, Me,
Windows NT®, and Mac® OS 10.‍3 and earlier.‍
1 Connect the device to your computer using the USB cable.‍
2 Go to www.garminconnect.com/‍start.‍
3 Follow the on-screen instructions.‍
Deleting Files
Bluetooth Connected Features
Data Management
NOTICE
If you do not know the purpose of a file, do not delete it.‍ Your
device memory contains important system files that should not
be deleted.‍
1
2
3
4
Open the Garmin drive or volume.‍
If necessary, open a folder or volume.‍
Select a file.‍
Press the Delete key on your keyboard.‍
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss.‍ If your device is connected to
your Windows computer as a portable device, it is not necessary
to safely disconnect.‍
1 Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.‍
• For Mac computers, drag the volume icon to the trash.‍
2 Disconnect the cable from your computer.‍
Garmin Connect
You can connect with your friends on Garmin Connect.‍ Garmin
Connect gives you the tools to track, analyze, share, and
encourage each other.‍ Record the events of your active lifestyle
including runs, walks, rides, swims, hikes, triathlons, and more.‍
To sign up for a free account, go to www.garminconnect.com
/‍start.‍
Store your activities: After you complete and save an activity
with your device, you can upload that activity to Garmin
Connect and keep it as long as you want.‍
Analyze your data: You can view more detailed information
about your activity, including time, distance, elevation, heart
rate, calories burned, cadence, VO2 max.‍, running dynamics,
an overhead map view, pace and speed charts, and
customizable reports.‍
NOTE: Some data requires an optional accessory such as a
heart rate monitor.‍
Plan your training: You can choose a fitness goal and load one
of the day-by-day training plans.‍
Share your activities: You can connect with friends to follow
each other's activities or post links to your activities on your
favorite social networking sites.‍
Using Garmin Connect
You can upload all of your activity data to Garmin Connect for
comprehensive analysis.‍ With Garmin Connect, you can view a
map of your activity, and share your activities with friends.‍
6
The Forerunner device has several Bluetooth connected
features for your compatible smartphone or mobile device using
the Garmin Connect Mobile app.‍ For more information, go to www.garmin.com/‍intosports​/‍apps.‍
LiveTrack: Allows friends and family to follow your races and
training activities in real time.‍ You can invite followers using
email or social media, allowing them to view your live data on
a Garmin Connect tracking page.‍
Activity uploads: Automatically sends your activity to Garmin
Connect Mobile as soon as you finish recording the activity.‍
Workout and course downloads: Allows you to browse for
workouts and courses in Garmin Connect Mobile and
wirelessly send them to your device.‍
Social media interactions: Allows you to post an update to
your favorite social media website when you upload an
activity to Garmin Connect Mobile.‍
Notifications: Displays phone notifications and messages on
your Forerunner device.‍
Pairing Your Smartphone with Your Forerunner
1 Go to www.garmin.com/‍intosports​/‍apps, and download the
Garmin Connect Mobile app to your smartphone.‍
2 Bring your smartphone within 10 m (33 ft.‍) of your Forerunner
device.‍
3 From the Forerunner device, select
> Settings >
Bluetooth > Pair Mobile Device.‍
4 Open the Garmin Connect Mobile app, and follow the onscreen instructions to connect a device.‍
The instructions are provided during the initial setup, or can
be found in the Garmin Connect Mobile app help.‍
Turning Off Bluetooth Technology
• From the Forerunner home screen, select > Settings >
Bluetooth > Status > Off.‍
• Refer to the owner's manual for your mobile device to turn off
Bluetooth wireless technology.‍
Wi‑Fi Connected Features
The Forerunner device has Wi‑Fi connected features.‍ The
Garmin Connect Mobile app is not required for you to use Wi‑Fi
connectivity.‍
Activity uploads to your Garmin Connect account:
Automatically sends your activity to your Garmin Connect
account as soon as you finish recording the activity.‍
Workouts and training plans: Allows you to browse for and
select workouts and training plans on the Garmin Connect
site.‍ The next time your device has a Wi‑Fi connection, the
files are wirelessly sent to your device.‍
Software updates: Your device downloads the latest software
update when a Wi‑Fi connection is available.‍ The next time
you turn on or unlock the device, you can follow the onscreen instructions to install the software update.‍
Setting Up Wi‑Fi Connectivity on Your Forerunner
Before you can upload an activity wirelessly, you must have an
activity saved to your device, and the timer must be stopped.‍
1 Go to www.garminconnect.com/‍start, and download the
Garmin Express™ application.‍
2 Follow the on-screen instructions to set up Wi‑Fi with Garmin
Express.‍
TIP: You can register your device at this time.‍
Your device attempts to upload your saved activity to your
Garmin Connect account following each activity.‍ You can
History
also hold
activities.‍
on your device to start uploading your saved
Turning Off Wi‑Fi Technology
• From the Forerunner home screen, select
Wi-Fi > Auto Upload > Off.‍
> Settings >
Navigation
You can use the GPS navigation features on your device to view
your path on a map, save locations, and find your way home.‍
Adding the Map
You can add the map to the data screens loop for an activity
profile.‍
1 Select an activity profile.‍
2 Select > Activity Settings > Data Screens > Map >
Status > On.‍
Map Features
When you start the timer and begin to move, a black line
appears on the map, showing you where you have traveled.‍
À
Á
Â
Points to north
Your current location and heading
Zoom level
Marking Your Location
Before you can mark a location, you must enable the map
screen for your activity profile and locate satellites.‍
A location is a point that you record and store in the device.‍ If
you want to remember landmarks or return to a certain spot, you
can mark a location.‍
1 Go to the place where you want to mark a location.‍
2 Select to view the map.‍
3 Hold .‍
4 Select Save Location.‍
The location appears on the map with the date and time.‍
Navigating to a Saved Location
Before you can navigate to a saved location, you must locate
satellites.‍
1 Select > Navigation > Saved Locations.‍
2 Select a location.‍
3 Select Go To.‍
The compass appears.‍ The arrow points toward the saved
location.‍
4 Select to view the map (optional).‍
A line appears on the map from your current location to the
saved location.‍
5 Select to start the timer and record the activity.‍
Navigating Back to Start
At any point during your activity, you can return to your starting
location.‍ For example, if you are running in a new city, and you
are unsure how to get back to the trail head or hotel, you can
navigate back to your starting location.‍
NOTE: Garmin® recommends that you locate satellites and
start the timer before attempting to navigate back to your
starting location.‍ If not, the device navigates you to the starting
location of the last saved activity.‍
NOTE: Garmin recommends enabling the map screen for your
activity profile in order to view your route on the map.‍ By default,
the compass screen appears to navigate you back to your
starting location.‍
1 Select an option:
• If the timer is still running, select > Navigation > Back
to Start.‍
• If you stopped the timer and saved your activity, select
> Navigation > Back to Start.‍
The device navigates you to the starting location of the
last saved activity.‍ You can start the timer again to
prevent the device from timing out to watch mode.‍
The compass appears.‍ The arrow points toward your starting
point.‍
2 Select to view the map (optional).‍
A line appears on the map from your current location to your
starting point.‍
Courses
TIP: This procedure provides location details and another way
to save your current location.‍
1 Select > Navigation > Where Am I?.‍
Your device must locate satellites before it can display your
location information.‍
2 If necessary, select Save Location.‍
You can send a course from your Garmin Connect account to
your device.‍ After it is saved to your device, you can navigate
the course on your device.‍
You can follow a saved course simply because it is a good
route.‍ For example, you can save and follow a bike friendly
commute to work.‍
You can also follow a saved course, trying to match or exceed
previously set performance goals.‍ For example, if the original
course was completed in 30 minutes, you can race against a
Virtual Partner trying to complete the course in under 30
minutes.‍
Editing a Location
Following a Course From the Web
Viewing Your Current Elevation and Coordinates
You can edit the name of the saved location.‍
1 Select > Navigation > Saved Locations.‍
2 Select a location.‍
3 Select Name.‍
4 Edit the name, and select .‍
Deleting a Location
1 Select > Navigation > Saved Locations.‍
2 Select a location.‍
3 Select Delete > Yes.‍
Navigation
Before you can download a course from your Garmin Connect
account, you must have a Garmin Connect account (Garmin
Connect).‍
1 Connect the device to your computer using the USB cable.‍
2 Go to www.garminconnect.com.‍
3 Create a new course, or select an existing course.‍
4 Select Send to Device.‍
5 Disconnect the device, and turn it on.‍
6 Select > Navigation > Courses.‍
7
7 Select a course.‍
8 Select Do Course.‍
9 Select to start the timer.‍
The map displays the course and status information at the
top of the screen.‍
10 If necessary, select to view additional data screens.‍
Viewing Course Details
1 Select > Navigation > Courses.‍
2 Select a course.‍
3 Select an option:
• Select Map to view the course on the map.‍
• Select Elevation Profile to view an elevation plot of the
course.‍
• Select Name to view and edit the name of the course.‍
Deleting a Course
1 Select > Navigation > Courses.‍
2 Select a course.‍
3 SelectDelete > Yes .‍
Stopping Navigation
1 During the activity, select to view the compass or map.‍
2 Hold .‍
3 Select Stop Navigation > Yes.‍
ANT‍+ Sensors
Your device can be used with wireless ANT‍+ sensors.‍ For more
information about compatibility and purchasing optional sensors,
go to http:​/‍​/‍buy​.garmin​.com.‍
Putting On the Heart Rate Monitor
NOTE: If you do not have a heart rate monitor, you can skip this
task.‍
You should wear the heart rate monitor directly on your skin, just
below your sternum.‍ It should be snug enough to stay in place
during your activity.‍
1 Snap the heart rate monitor module À onto the strap.‍
The Garmin logos on the module and the strap should be
right-side up.‍
2 Wet the electrodes Á and the contact patches  on the back
of the strap to create a strong connection between your chest
and the transmitter.‍
The Garmin logos should be right-side up.‍
4 Bring the device within 3 m (10 ft.‍) of the heart rate monitor.‍
After you put on the heart rate monitor, it is active and sending
data.‍
TIP: If the heart rate data is erratic or does not appear, see the
troubleshooting tips (Tips for Erratic Heart Rate Data).‍
Running Dynamics
You can use your compatible Forerunner device paired with the
HRM‍-‍Run™ accessory to provide real-time feedback about your
running form.‍ If your Forerunner device was packaged with the
HRM‍-‍Run accessory, the devices are already paired.‍
The HRM‍-‍Run accessory has an accelerometer in the module
that measures torso movement in order to calculate three
running metrics: cadence, vertical oscillation, and ground
contact time.‍
NOTE: The HRM‍-‍Run accessory is compatible with several
ANT‍+ fitness products and can display heart rate data when
paired.‍ The running dynamics features are available only on
some Garmin devices.‍
Cadence: Cadence is the number of steps per minute.‍ It
displays total steps (right and left combined).‍
Vertical oscillation: Vertical oscillation is your bounce while
running.‍ It displays the vertical motion of your torso,
measured in centimeters for each step.‍
Ground contact time: Ground contact time is the amount of
time in each step that you spend on the ground while
running.‍ It is measured in milliseconds.‍
NOTE: Ground contact time is not available while walking.‍
Training with Running Dynamics
Before you can view running dynamics, you must put on the
HRM‍-‍Run accessory and pair it with your device (Pairing Your
ANT‍+ Sensors).‍
1 If your Forerunner was packaged with the HRM‍-‍Run
accessory, the devices are already paired, and the
Forerunner is set to display running dynamics.‍ You can put
on your heart rate monitor and skip to step 4.‍
2 Select > Activity Settings > Data Screens > Running
Dynamics > Status > Enable.‍
3 Select Primary Metric.‍
4 Select Cadence, Ground Contact Time, or Vertical
Oscillation.‍
The primary metric appears as the top field on the data
screen with a corresponding position on the color gauge.‍
5 Go for a run.‍
6 Scroll to the running dynamics screen to view your metrics.‍
3 Wrap the strap around your chest, and connect the strap
hook à to the loop Ä.‍
NOTE: The care tag should not fold over.‍
7 If necessary, hold
your run.‍
8
to change the primary metric during
ANT+ Sensors
Color Gauges and Running Dynamics Data
The running dynamics screen displays a color gauge for the primary metric.‍ You can display cadence, vertical oscillation, or ground
contact time as the primary metric.‍ The color gauge shows you how your running dynamics data compares to those of other
runners.‍ The color zones are based on percentiles.‍
Garmin has researched many runners of all different levels.‍ The data values in the red or orange zones are typical for less
experienced or slower runners.‍ The data values in the green, blue, or purple zones are typical for more experienced or faster
runners.‍ Less experienced runners tend to exhibit longer ground contact times, higher vertical oscillation, and lower cadence than
more experienced runners.‍ However, taller runners typically have slightly slower cadences and slightly higher vertical oscillation.‍ Go
to www.garmin.com for more information on running dynamics.‍ For additional theories and interpretations of running dynamics data,
you can search reputable running publications and websites.‍
Color Zone
Percentile in Zone
Cadence Range
Vertical Oscillation Range
Ground Contact Time Range
Purple
>95
>185 spm
<6.‍7 cm
<208 ms
Blue
70–95
174–185 spm
6.‍7–8.‍3 cm
208–240 ms
Green
30–69
163–173 spm
8.‍4–10.‍0 cm
241–272 ms
Orange
5–29
151–162 spm
10.‍1–11.‍8 cm
273–305 ms
Red
<5
<151 spm
>11.‍8 cm
>305 ms
Tips for Missing Running Dynamics Data
If running dynamics data does not appear, you can try these
tips.‍
• Make sure you have the HRM‍-‍Run accessory.‍
The HRM‍-‍Run accessory has on the front of the module.‍
• Pair the HRM‍-‍Run accessory with your Forerunner again,
according to the instructions.‍
• If the running dynamics data display zeros, make sure the
HRM‍-‍Run module is worn right-side up.‍
NOTE: Ground contact time appears only while running.‍ It
cannot be calculated while walking.‍
Tips for Erratic Heart Rate Data
If the heart rate data is erratic or does not appear, you can try
these tips.‍
• Reapply moisture to the electrodes and contact patches.‍
• Tighten the strap on your chest.‍
• Warm up for 5–10 minutes.‍
• Wash the strap after every seven uses (Caring for the Heart
Rate Monitor).‍
• Wear a cotton shirt or wet your shirt if suitable for your
activity.‍
Synthetic fabrics that rub or flap against the heart rate
monitor can create static electricity that interferes with heart
rate signals.‍
• Move away from sources that can interfere with your heart
rate monitor.‍
Sources of interference may include strong electromagnetic
fields, some 2.‍4 GHz wireless sensors, high-voltage power
lines, electric motors, ovens, microwave ovens, 2.‍4 GHz
cordless phones, and wireless LAN access points.‍
About VO2 Max.‍ Estimates
VO2 max.‍ is the maximum volume of oxygen (in mililiters) you
can consume per minute per kilogram of body weight at your
maximum performance.‍ In simple terms, VO2 max.‍ is an
indication of athletic performance and should increase as your
level of fitness improves.‍ VO2 max.‍ estimates are provided and
supported by Firstbeat® Technologies Ltd.‍ The Forerunner
device has separate VO2 max.‍ estimates for running and
cycling.‍ You can use your Garmin device paired with a
compatible heart rate monitor and power meter to display your
cycling VO2 max.‍ estimate.‍ You can use your Garmin device
paired with a compatible heart rate monitor to display your
running VO2 max.‍ estimate.‍
Getting Your VO2 Max.‍ Estimate for Running
Before you can view your VO2 max.‍ estimate, you must put on
the heart rate monitor and pair it with your device (Pairing Your
ANT‍+ Sensors).‍ If your Forerunner device was packaged with a
ANT+ Sensors
heart rate monitor, the devices are already paired.‍ For the most
accurate estimate, complete the user profile setup (Setting Up
Your User Profile), and set your maximum heart rate (Setting
Your Heart Rate Zones).‍
NOTE: The estimate may seem inaccurate at first.‍ The device
requires a few runs to learn about your running performance.‍
1 Run for at least 10 minutes outdoors.‍
2 After your run, select Save.‍
3 Select > My Stats > VO2 Max.‍.‍
Your VO2 max.‍ estimate is a number and position on the
color gauge.‍
Purple
Superior
Blue
Excellent
Green
Good
Orange
Fair
Red
Poor
VO2 max.‍ data and analysis is provided with permission from
The Cooper Institute®.‍ For more information, see the
appendix (VO2 Max.‍ Standard Ratings), and go to
www.CooperInstitute.org.‍
Getting Your VO2 Max.‍ Estimate for Cycling
Before you can view your VO2 max.‍ estimate, you must put on
the heart rate monitor, install the power meter, and pair them
with your Forerunner device (Pairing Your ANT‍+ Sensors).‍ If
your Forerunner device was packaged with a heart rate monitor,
the devices are already paired.‍ For the most accurate estimate,
complete the user profile setup (Setting Up Your User Profile)
and set your maximum heart rate (Setting Your Heart Rate
Zones).‍
NOTE: The estimate may seem inaccurate at first.‍ The device
requires a few rides to learn about your cycling performance.‍
1 Ride at a steady, high intensity for at least 20 minutes
outdoors.‍
After
your ride, select Save.‍
2
3 Select > My Stats > VO2 Max.‍.‍
Your VO2 max.‍ estimate is a number and position on the
color gauge.‍
9
Setting Your Heart Rate Zones
Purple
Superior
Blue
Excellent
Green
Good
Orange
Fair
Red
Poor
VO2 max.‍ data and analysis is provided with permission from
The Cooper Institute.‍ For more information, see the appendix
(VO2 Max.‍ Standard Ratings), and go to
www.CooperInstitute.org.‍
Tips for Cycling VO2 Max.‍ Estimates
The success and accuracy of the VO2 max.‍ calculation
improves when your ride is a sustained and moderately hard
effort, and where heart rate and power are not highly variable.‍
• Before your ride, check that your Forerunner device, heart
rate monitor, and power meter are functioning properly,
paired, and have good battery life.‍
• During your 20 minute ride, maintain your heart rate at
greater than 70% of your maximum heart rate.‍
• During your 20 minute ride, maintain a fairly constant power
output.‍
• Avoid rolling terrain.‍
• Avoid riding in groups where there is a lot of drafting.‍
Recovery Advisor
You can use your Garmin device paired with the heart rate
monitor to display how much time remains before you are fully
recovered and ready for the next hard workout.‍ The recovery
advisor feature includes recovery time and recovery check.‍
Recovery advisor technology is provided and supported by
Firstbeat Technologies Ltd.‍
Recovery check: The recovery check provides a real-time
indication of your state of recovery within the first several
minutes of an activity.‍
Recovery time: The recovery time appears immediately
following an activity.‍ The time counts down until it is optimal
for you to attempt another hard workout.‍
Turning On the Recovery Advisor
Before you can use the recovery advisor feature, you must put
on the heart rate monitor and pair it with your device (Pairing
Your ANT‍+ Sensors).‍ If your Forerunner was packaged with a
heart rate monitor, the devices are already paired.‍ For the most
accurate estimate, complete the user profile setup (Setting Up
Your User Profile), and set your maximum heart rate (Setting
Your Heart Rate Zones).‍
1 Select > My Stats > Recovery Advisor > Status > On.‍
2 Go for a run.‍
Within the first several minutes of your run, a recovery check
appears, showing your real-time state of recovery.‍
3 After your run, select Save.‍
The recovery time appears.‍ The maximum time is 4 days,
and the minimum time is 6 hours.‍
10
The device uses your user profile information from the initial
setup to determine your default heart rate zones.‍ The device
has separate heart rate zones for running and cycling.‍ For the
most accurate calorie data during your activity, set your
maximum heart rate.‍ You can also set each heart rate zone and
enter your resting heart rate manually.‍ You can manually adjust
your zones on the device or using your Garmin Connect
account.‍
1 Select > My Stats > User Profile > Heart Rate Zones.‍
2 Select Default to view the default values (optional).‍
The default values can be applied to running and cycling.‍
3 Select Running or Cycling.‍
4 Select Preference > Set Custom > Based On.‍
5 Select an option:
• Select BPM to view and edit the zones in beats per
minute.‍
• Select %Max.‍ HR to view and edit the zones as a
percentage of your maximum heart rate.‍
• Select %HRR to view and edit the zones as a percentage
of your heart rate reserve (maximum heart rate minus
resting heart rate).‍
6 Select Max.‍ HR, and enter your maximum heart rate.‍
7 Select a zone, and enter a value for each zone.‍
8 Select Resting HR, and enter your resting heart rate.‍
About Heart Rate Zones
Many athletes use heart rate zones to measure and increase
their cardiovascular strength and improve their level of fitness.‍ A
heart rate zone is a set range of heartbeats per minute.‍ The five
commonly accepted heart rate zones are numbered from 1 to 5
according to increasing intensity.‍ Generally, heart rate zones
are calculated based on percentages of your maximum heart
rate.‍
Fitness Goals
Knowing your heart rate zones can help you measure and
improve your fitness by understanding and applying these
principles.‍
• Your heart rate is a good measure of exercise intensity.‍
• Training in certain heart rate zones can help you improve
cardiovascular capacity and strength.‍
• Knowing your heart rate zones can prevent you from
overtraining and can decrease your risk of injury.‍
If you know your maximum heart rate, you can use the table
(Heart Rate Zone Calculations) to determine the best heart rate
zone for your fitness objectives.‍
If you do not know your maximum heart rate, use one of the
calculators available on the Internet.‍ Some gyms and health
centers can provide a test that measures maximum heart rate.‍
The default maximum heart rate is 220 minus your age.‍
Pairing Your ANT‍+ Sensors
Before you can pair, you must put on the heart rate monitor or
install the sensor.‍
Pairing is the connecting of ANT‍+ wireless sensors, for
example, connecting a heart rate monitor with your Garmin
device.‍
1 Bring the device within range (3 m) of the sensor.‍
NOTE: Stay 10 m away from other ANT‍+ sensors while
pairing.‍
2 Select > Settings > Sensors and Accessories > Add
New.‍
3 Select a sensor.‍
ANT+ Sensors
When the sensor is paired with your device, a message
appears.‍ You can customize a data field to display sensor
data.‍
Foot Pod
Your device is compatible with the foot pod.‍ You can use the
foot pod to record pace and distance instead of using GPS
when you are training indoors or when your GPS signal is weak.‍
The foot pod is on standby and ready to send data (like the
heart rate monitor).‍
After 30 minutes of inactivity, the foot pod powers off to
conserve the battery.‍ When the battery is low, a message
appears on your device.‍ Approximately five hours of battery life
remain.‍
Going for a Run Using a Foot Pod
Before you go for a run, you must pair the foot pod with your
Forerunner device (Pairing Your ANT‍+ Sensors).‍
You can run indoors using a foot pod to record pace, distance,
and cadence.‍ You can also run outdoors using a foot pod to
record cadence data with your GPS pace and distance.‍
1 Install your foot pod according to the accessory instructions.‍
2 If necessary, select > Activity Settings > GPS to turn on
or turn off GPS.‍
3 Select to start the timer.‍
4 After you complete your run, select > Save.‍
Foot Pod Calibration
The foot pod is self-calibrating.‍ The accuracy of the speed and
distance data improves after a few outdoor runs using GPS.‍
Training with Power Meters
• Go to www.garmin.com/‍intosports for a list of ANT‍+ sensors
that are compatible with your device (such as Vector™).‍
• For more information, see the owner's manual for your power
meter.‍
• Adjust your power zones to match your goals and abilities
(Setting Your Power Zones).‍
• Use range alerts to be notified when you reach a specified
power zone (Setting Range Alerts).‍
• Customize the power data fields (Customizing the Data
Screens).‍
• Hold to calibrate the power meter.‍
Setting Your Power Zones
The values for the zones are default values and may not match
your personal abilities.‍ If you know your functional threshold
power (FTP) value, you can enter it and allow the software to
calculate your power zones automatically.‍ You can manually
adjust your zones on the device or using your Garmin Connect
account.‍
1 From the home screen, select > My Stats > User Profile
> Power Zones > Based On.‍
2 Select an option:
• Select Watts to view and edit the zones in watts.‍
• Select % FTP to view and edit the zones as a percentage
of your functional threshold power.‍
3 Select FTP, and enter your FTP value.‍
4 Select a zone, and enter a value for each zone.‍
5 If necessary, select Minimum, and enter a minimum power
value.‍
Customizing Your Device
VIRB Remote
The VIRB remote function allows you to control your VIRB
action camera from a distance.‍ Go to www.garmin.com/‍VIRB to
purchase a VIRB action camera.‍
Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you must enable
the remote setting on your VIRB camera.‍ See the VIRB Series
Owner's Manual for more information.‍
1 Turn on your VIRB camera.‍
2 Pair the VIRB camera with your Forerunner device (Pairing
Your ANT‍+ Sensors).‍
3 On the Forerunner device, select the VIRB accessory.‍
When the VIRB accessory is paired, the VIRB screen is
added to the data screens for the active profile.‍
4 Select an option:
• Select Timer Start/Stop to control the camera using the
timer ( ).‍
Video recording automatically starts and stops with the
Forerunner device timer.‍
• Select Manual to control the camera using the shortcut
menu.‍ From the VIRB screen, you can hold to control
the camera.‍
Customizing Your Device
Setting Up Your User Profile
You can update your gender, birth year, height, weight, heart
rate zone, and power zone settings.‍ The device uses this
information to calculate accurate training data.‍
1 Select > My Stats > User Profile.‍
2 Select an option.‍
Activity Profiles
Activity profiles are a collection of settings that optimize your
device based on how you are using it.‍ For example, the settings
and data screens are different when you are using the device for
running than for riding your bike.‍
When you are using a profile and you change settings such as
data fields or alerts, the changes are saved automatically as
part of the profile.‍
Changing Your Activity Profile
The device has seven default activity profiles.‍ You can modify
any of the saved activity profiles.‍
TIP: The default activity profiles use a specific accent color for
each sport.‍ The multisport activity profile changes the accent
color when you switch sport segments.‍
1 Select > Settings > Activity Profiles.‍
2 Select a profile.‍
3 If necessary, select Name, and enter a new name for the
profile.‍
4 If necessary, select Color, and select an accent color for the
profile.‍
5 Select Apply Profile.‍
Creating a Custom Activity Profile
1 Select > Settings > Activity Profiles > Add New.‍
2 Select a sport.‍
NOTE: The default sports use the default icon.‍ If you select
Other, you can select a different icon.‍
3 Select an accent color.‍
4 Select a profile name or enter a custom name.‍
11
Duplicate profile names include a number, for example:
Triathlon(2).‍
5 Select an option:
• Select Use Default to create your custom profile starting
from the system default settings.‍
• Select a copy of an existing profile to create your custom
profile starting from one of your saved profiles.‍
NOTE: If you are creating a custom multisport profile, you
are prompted to select two or more profiles and include
transitions.‍
6 Select an option:
• Select Edit Settings to customize specific profile settings.‍
• Select Done to save and use the custom profile.‍
Setting a Recurring Alert
A recurring alert notifies you each time the device records a
specified value or interval.‍ For example, you can set the device
to alert you every 30 minutes.‍
1 Select > Activity Settings > Alerts > Add New.‍
2 Select an option:
• Select Custom, select a message, and select an alert
type.‍
• Select Time, Distance, or Calories.‍
3 Enter a value.‍
Each time you reach the alert value, a message appears.‍ The
device also beeps or vibrates if audible tones are turned on
(Setting the Device Sounds).‍
Deleting an Activity Profile
1 Select > Settings > Activity Profiles.‍
2 Select a profile.‍
Setting Walk Break Alerts
Some running programs use timed walking breaks at regular
intervals.‍ For example, during a long training run, you can set
the device to alert you to run for 4 minutes, and then walk for 1
minute, and repeat.‍ You can use the Auto Lap® feature while
using the run/walk alerts.‍
NOTE: Walk break alerts are available only for running profiles.‍
1 Select > Activity Settings > Alerts > Add New.‍
2 Select Run/Walk.‍
3 Enter a time for the run interval.‍
4 Enter a time for the walk interval.‍
Each time you reach the alert value, a message appears.‍ The
device also beeps or vibrates if audible tones are turned on
(Setting the Device Sounds).‍
NOTE: You cannot delete the active profile, and you cannot
delete a single sport profile that is contained within the active
multisport profile.‍
Select
Remove Profile > Yes.‍
3
Activity Settings
These settings allow you to customize your device based on
your training needs.‍‍ For example, you can customize data
screens and enable alerts and training features.‍‍
Customizing the Data Screens
You can customize data screens based on your training goals or
optional accessories.‍ For example, you can customize one of
the data screens to display your lap pace or heart rate zone.‍
1 Select > Activity Settings > Data Screens.‍
2 Select a screen.‍
3 If necessary, select Status > On to enable the data screen.‍
4 If necessary, edit the number of data fields.‍
5 Select a data field to change it.‍
Adding the Clock
You can add the clock to the data screens loop for an activity
profile.‍
1 Select an activity profile.‍
2 Select > Activity Settings > Data Screens > Clock > On.‍
Alerts
You can use alerts to train toward specific heart rate, pace, time,
distance, cadence, and calories goals and to set run/walk time
intervals.‍
Setting Range Alerts
A range alert notifies you when the device is above or below a
specified range of values.‍ For example, if you have an optional
heart rate monitor, you can set the device to alert you when your
heart rate is below zone 2 and over zone 5 (Setting Your Heart
Rate Zones).‍
1 Select > Activity Settings > Alerts > Add New.‍
2 Select the type of alert.‍
Depending on your accessories and the activity profile, the
alerts may include heart rate, pace, speed, cadence, and
power.‍
3 If necessary, turn on the alert.‍
4 Select a zone or enter a value for each alert.‍
Each time you exceed or drop below the specified range, a
message appears.‍ The device also beeps or vibrates if audible
tones are turned on (Setting the Device Sounds).‍
12
Editing an Alert
1 Select > Activity Settings > Alerts.‍
2 Select an alert.‍
3 Edit the alert values or settings.‍
Running with the Metronome
The metronome feature plays tones at a steady rhythm to help
you improve your performance by training at a faster, slower, or
more consistent cadence.‍
NOTE: The metronome is not available for cycling or swimming
profiles.‍
1 Select > Activity Settings > Metronome > Status > On.‍
2 Select an option:
• Select Beats Per Minute to enter a value based on the
cadence you want to maintain.‍
• Select Alert Frequency to customize the frequency of the
beats.‍
• Select Sounds to customize the metronome sound.‍
3 If necessary, select Preview to listen to the metronome
feature before you run.‍
4 Select BACK to return to the timer screen.‍
5 Select to start the timer.‍
6 Go for a run.‍
The metronome starts automatically.‍
7 During your run, select to view the metronome screen.‍
8 If necessary, hold to change the metronome settings.‍
Using Auto Pause®
You can use the Auto Pause feature to pause the timer
automatically when you stop moving or when your pace or
speed drops below a specified value.‍ This feature is helpful if
your activity includes stop lights or other places where you need
to slow down or stop.‍
NOTE: History is not recorded while the timer is stopped or
paused.‍
Customizing Your Device
1 Select > Activity Settings > Auto Pause.‍
2 Select an option:
• Select When Stopped to pause the timer automatically
when you stop moving.‍
• Select Custom to pause the timer automatically when
your pace or speed drops below a specified value.‍
Auto Lap
Move Alert: Displays a message and move bar on the time of
day screen.‍ The device also beeps or vibrates if audible
tones are turned on (Setting the Device Sounds).‍
Phone Notifications
Phone notifications require a compatible smartphone to be
paired with the Forerunner device.‍ When your phone receives
messages, it sends notifications to your device.‍
NOTE: The Auto Lap feature does not function during interval or
custom workouts or pool swim mode.‍
Enabling Bluetooth Notifications
1 Select > Settings > Bluetooth > Smart Notifications.‍
Marking Laps by Distance
2 Select During Activity.‍
You can use the Auto Lap feature to mark a lap at a specific
3 Select Off, Show Calls Only, or Show All.‍
distance automatically.‍ This feature is helpful for comparing your
4 Select Not During Activity.‍
performance over different parts of a run (for example, every 1
mi.‍ or 5 km).‍
5 Select Off, Show Calls Only, or Show All.‍
1 Select > Activity Settings > Laps > Auto Distance.‍
NOTE: You can change the audible sounds for notifications.‍
2 Select a distance.‍
Viewing Notifications
Each time you complete a lap, a message appears that displays
the time for that lap.‍ The device also beeps or vibrates if audible
tones are turned on (Setting the Device Sounds).‍
If necessary, you can customize the data screens to display
additional lap data.‍
Customizing the Lap Alert Message
You can customize one or two data fields that appear in the lap
alert message.‍
1 Select > Activity Settings > Laps > Lap Alert.‍
2 Select a data field to change it.‍
3 Select Preview (optional).‍
Using Auto Scroll
You can use the auto scroll feature to cycle through all of the
training data screens automatically while the timer is running.‍
1 Select > Activity Settings > Auto Scroll.‍
2 Select a display speed.‍
Using UltraTrac Mode
Before using UltraTrac mode, you should run outdoors a few
times using normal GPS mode to calibrate the device.‍
You can use UltraTrac mode for extended activities.‍ UltraTrac
mode is a GPS setting that periodically turns off GPS to save
battery power.‍ When GPS is off, the device uses the
accelerometer to calculate speed and distance.‍ Speed,
distance, and track data accuracy are reduced in UltraTrac
mode.‍ The accuracy of the data improves after a few outdoor
runs using GPS.‍
Select > Activity Settings > GPS > UltraTrac.‍
TIP: For extended activities, you should consider other
battery saving options (Maximizing Battery Life).‍
Power Save Timeout Settings
The timeout settings affect how long your device stays in
training mode, for example, when you are waiting for a race to
start.‍ Select > Activity Settings > Power Save Timeout.‍
Normal: Sets the device to enter low-power watch mode after 5
minutes of inactivity.‍
Extended: Sets the device to enter low-power watch mode after
25 minutes of inactivity.‍ The extended mode can result in
shorter battery life between charges.‍
Activity Tracking Settings
Select > Settings > Activity Tracking.‍
Status: Enables the activity tracking feature.‍
Show on Clock: Displays your steps on the time of day screen.‍
Customizing Your Device
1 When a notification appears on your Forerunner device,
select an option:
• Select to view the entire notification.‍
• Select to dismiss the notification.‍
2 If necessary, select > Smart Notifications to view all
notifications.‍
Managing Notifications
You can use your compatible mobile device to manage
notifications displayed on your Forerunner device.‍
Select an option:
• If you are using an iOS® device, use the notification
center settings on your mobile device to select the items
to show on the device.‍
• If you are using an Android™ device, use the app settings
in the Garmin Connect Mobile app to select the items to
show on the device.‍
System Settings
Select > Settings > System.‍
• Language (Changing the Device Language)
• Time Settings (Time Settings)
• Backlight Settings (Backlight Settings)
• Sound Settings (Setting the Device Sounds)
• Unit Settings (Changing the Units of Measure)
• Satellite Setting (Changing the Satellite Setting)
• Format Settings (Format Settings)
• Data Recording Settings (Data Recording Settings)
Changing the Device Language
Select
> Settings > System > Language.‍
Time Settings
Select > Settings > System > Clock.‍
Time Format: Sets the device to show time in a 12-hour or a
24-hour format.‍
Set Time: Allows you to set the time manually or automatically
based on your GPS position.‍
Background: Sets the background color to black or white.‍
Use Profile Color: Sets the accent color for the time of day
screen to be the same as the activity profile color.‍
Time Zones
Each time you turn on the device and acquire satellites, the
device automatically detects your time zone and the current time
of day.‍
13
Setting the Time Manually
By default, the time is set automatically when the device
acquires satellite signals.‍
1 Select > Settings > System > Clock > Set Time >
Manual.‍
2 Select Time, and enter the time of day.‍
Setting the Alarm
1 Select > Settings > Alarm > Status > On.‍
2 Select Time, and enter a time.‍
Backlight Settings
Select > Settings > System > Backlight.‍
Mode: Sets the backlight to turn on manually or for keys and
alerts.‍
Timeout: Sets the length of time before the backlight turns off.‍
Setting the Device Sounds
The device sounds include key tones, alert tones, and
vibrations.‍
Select > Settings > System > Sounds.‍
Changing the Units of Measure
You can customize units of measure for distance, pace and
speed, and weight.‍
1 Select > Settings > System > Units.‍
2 Select a measurement type.‍
3 Select a unit of measure.‍
Changing the Satellite Setting
By default, the device uses GPS to locate satellites.‍ For
increased performance in challenging environments and faster
GPS position location, you can enable GPS and GLONASS.‍
Using GPS and GLONASS reduces battery life more than using
only GPS.‍
Select > Settings > System > GLONASS.‍
Format Settings
Select > Settings > System > Format.‍
Pace/Speed Preference: Sets the device to display speed or
pace for running, cycling, or other activities.‍ This preference
affects several training options, history, and alerts.‍
Start of Week: Sets the first day of the week for your weekly
history totals.‍
Data Recording Settings
Select > Settings > System > Data Recording.‍
Smart: Records key points where you change direction, pace,
or heart rate.‍ Your activity record is smaller, allowing you to
store more activities on the device memory.‍
Every Second: Records points every second.‍ It creates a very
detailed record of your activity and increases the size of the
activity record.‍
Device Information
Specifications
Forerunner Specifications
Battery type
Rechargable, built-in lithium-ion battery
Battery life
Over 4 months watch only mode
Up to 30 days in watch mode with activity
tracking
Up to 40 hours in UltraTrac mode
Up to 24 hours using GPS only
Up to 20 hours using GPS and GLONASS
14
Operating
temperature range
From -20º to 60ºC (from -4º to 140ºF)
Charging
temperature range
From 0º to 40ºC (from 32º to 104ºF)
Water rating
5 ATM*
*The device withstands pressure equivalent to a depth of 50 m.‍
For more information, go to www.garmin.com/‍waterrating.‍
HRM‍-‍Run Specifications
Battery type
User-replaceable CR2032, 3 volts
Battery life
1 year (1 hour per day)
Water rating
3 ATM*
NOTE: This product does not transmit heart
rate data while swimming.‍
Operating temperature
range
From -20° to 60°C (from -4° to 140°F)
Radio frequency/
protocol
2.‍4 GHz ANT‍+ wireless communications
protocol
*The device withstands pressure equivalent to a depth of 30 m.‍
For more information, go to www.garmin.com/‍waterrating.‍
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.‍
Avoid pressing the keys under water.‍
Do not use a sharp object to clean the device.‍
Avoid chemical cleaners, solvents, and insect repellents that
can damage plastic components and finishes.‍
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals.‍ Prolonged exposure to these substances can
damage the case.‍
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.‍
Cleaning the Device
1 Wipe the device using a cloth dampened with a mild
detergent solution.‍
2 Wipe it dry.‍
Caring for the Heart Rate Monitor
NOTICE
You must unsnap and remove the module before washing the
strap.‍
A build up of sweat and salt on the strap can decrease the
ability of the heart rate monitor to report accurate data.‍
• Go to www.garmin.com/‍HRMcare for detailed washing
instructions.‍
• Rinse the strap after every use.‍
• Machine wash the strap after every seven uses.‍
• Do not put the strap in a dryer.‍
• When drying the strap, hang it up or lay it flat.‍
• To prolong the life of your heart rate monitor, unsnap the
module when not in use.‍
User Replaceable Batteries
WARNING
Do not use a sharp object to remove batteries.‍
Keep the battery away from children.‍
Device Information
Never put batteries in mouth.‍ If swallowed, contact your
physician or local poison control center.‍
Replaceable coin cell batteries may contain perchlorate
material.‍ Special handling may apply.‍ See www.dtsc.ca.gov
/‍hazardouswaste​/‍perchlorate.‍
CAUTION
Contact your local waste disposal department to properly
recycle the batteries.‍
Satellite information is wirelessly downloaded to your device,
allowing it to quickly locate satellite signals.‍
• Pair your device with a Bluetooth enabled smartphone.‍
Satellite information is sent to your device, allowing it to
quickly locate satellite signals.‍
• Take your device outside to an open area away from tall
buildings and trees.‍
• Remain stationary for several minutes.‍
Replacing the Heart Rate Monitor Battery
Resetting the Device
1 Use a small Phillips screwdriver to remove the four screws
on the back of the module.‍
2 Remove the cover and battery.‍
If the device stops responding, you may need to reset it.‍ This
does not erase any of your data or settings.‍
1 Hold for 15 seconds.‍
The device turns off.‍
2 Hold for one second to turn on the device.‍
Clearing User Data
3 Wait 30 seconds.‍
4 Insert the new battery with the positive side facing up.‍
NOTE: Do not damage or lose the O-ring gasket.‍
5 Replace the back cover and the four screws.‍
NOTE: Do not overtighten.‍
After you replace the heart rate monitor battery, you may need
to pair it with the device again.‍
Troubleshooting
Support and Updates
Garmin Express provides easy access to these services for
Garmin devices.‍ Some services may not be available for your
device.‍
• Product registration
• Product manuals
• Software updates
• Map, chart, or course updates
• Vehicles, voices, and other extras
Getting More Information
• Go to www.garmin.com/‍intosports.‍
• Go to www.garmin.com/‍learningcenter.‍
• Go to http:​/‍​/‍buy​.garmin​.com, or contact your Garmin dealer
for information about optional accessories and replacement
parts.‍
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire satellite
signals.‍ The time and date are set automatically based on the
GPS position.‍
1 Go outdoors to an open area.‍
The front of the device should be oriented toward the sky.‍
2 Wait while the device locates satellites.‍
It may take 30–60 seconds to locate satellite signals.‍
Improving GPS Satellite Reception
• Connect your device to a wireless network.‍
Troubleshooting
You can restore all of the device settings to the factory default
values.‍
NOTE: This deletes all user-entered information, but it does not
delete your history.‍
1 Hold .‍
2 Select Yes to turn off the device.‍
3 While holding , hold to turn on the device.‍
4 Select Yes.‍
Restoring All Default Settings
NOTE: This deletes all user-entered information and activity
history.‍
You can reset all settings back to the factory default values.‍
Select > Settings > System > Restore Defaults > Yes.‍
Viewing Device Information
You can view the unit ID, software version, GPS version, and
software information.‍
Select > Settings > System > About.‍
Updating the Software
Before you can update your device software, you must have a
Garmin Connect account, and you must download the Garmin
Express application.‍
1 Connect the device to your computer using the USB cable.‍
When new software is available, Garmin Express sends it to
your device.‍
2 Follow the on-screen instructions.‍
3 Do not disconnect your device from the computer during the
update process.‍
NOTE: If you have already used Garmin Express to set up
your device with Wi‑Fi connectivity, Garmin Connect can
automatically download available software updates to your
device when it connects using Wi‑Fi.‍
Maximizing Battery Life
• Shorten the backlight timeout (Backlight Settings).‍
• Shorten the timeout to watch mode (Power Save Timeout
Settings).‍
• Turn off activity tracking (Activity Tracking).‍
• Select the Smart recording interval (Data Recording
Settings).‍
• Turn off GLONASS (Changing the Satellite Setting).‍
15
• Turn off the Bluetooth wireless feature (Turning Off Bluetooth
Technology).‍
• Turn off the Wi‑Fi wireless feature (Turning Off Wi‑Fi
Technology).‍
My daily step count does not appear
The daily step count is reset every night at midnight.‍
If dashes appear instead of your step count, allow the device
to acquire satellite signals and set the time automatically.‍
Zone % of
Maximum
Heart Rate
Perceived Exertion
Benefits
3
70–80%
Moderate pace, more
difficult to hold
conversation
Improved aerobic
capacity, optimal
cardiovascular training
4
80–90%
Fast pace and a bit
uncomfortable,
breathing forceful
Improved anaerobic
capacity and
threshold, improved
speed
5
90–100%
Sprinting pace,
unsustainable for long
period of time, labored
breathing
Anaerobic and
muscular endurance,
increased power
Appendix
Heart Rate Zone Calculations
Zone % of
Maximum
Heart Rate
Perceived Exertion
Benefits
1
50–60%
Relaxed, easy pace,
rhythmic breathing
Beginning-level
aerobic training,
reduces stress
2
60–70%
Comfortable pace,
slightly deeper
breathing, conversation
possible
Basic cardiovascular
training, good
recovery pace
VO2 Max.‍ Standard Ratings
These tables include standardized classifications for VO2 max.‍ estimates by age and gender.‍
Males
Percentile
20–29
30–39
40–49
50–59
60–69
70–79
Superior
95
55.‍4
54
52.‍5
48.‍9
45.‍7
42.‍1
Excellent
80
51.‍1
48.‍3
46.‍4
43.‍4
39.‍5
36.‍7
Good
60
45.‍4
44
42.‍4
39.‍2
35.‍5
32.‍3
Fair
40
41.‍7
40.‍5
38.‍5
35.‍6
32.‍3
29.‍4
Poor
0–40
<41.‍7
<40.‍5
<38.‍5
<35.‍6
<32.‍3
<29.‍4
Females
Percentile
20–29
30–39
40–49
50–59
60–69
70–79
Superior
95
49.‍6
47.‍4
45.‍3
41.‍1
37.‍8
36.‍7
Excellent
80
43.‍9
42.‍4
39.‍7
36.‍7
33
30.‍9
Good
60
39.‍5
37.‍8
36.‍3
33
30
28.‍1
Fair
40
36.‍1
34.‍4
33
30.‍1
27.‍5
25.‍9
Poor
0–40
<36.‍1
<34.‍4
<33
<30.‍1
<27.‍5
<25.‍9
Data reprinted with permission from The Cooper Institute.‍ For more information, go to www.CooperInstitute.org.‍
Wheel Size and Circumference
Wheel Size
L (mm)
The wheel size is marked on both sides of the tire.‍ This is not a
comprehensive list.‍ You can also use one of the calculators
available on the Internet.‍
24 × 2.‍00
1925
24 × 2.‍125
1965
26 × 7/8
1920
Wheel Size
L (mm)
26 × 1(59)
1913
12 × 1.‍75
935
26 × 1(65)
1952
14 × 1.‍5
1020
26 × 1.‍25
1953
14 × 1.‍75
1055
26 × 1-1/8
1970
16 × 1.‍5
1185
26 × 1-3/8
2068
16 × 1.‍75
1195
26 × 1-1/2
2100
18 × 1.‍5
1340
26 × 1.‍40
2005
18 × 1.‍75
1350
26 × 1.‍50
2010
20 × 1.‍75
1515
26 × 1.‍75
2023
20 × 1-3/8
1615
26 × 1.‍95
2050
22 × 1-3/8
1770
26 × 2.‍00
2055
22 × 1-1/2
1785
26 × 2.‍10
2068
24 × 1
1753
26 × 2.‍125
2070
24 × 3/4 Tubular
1785
26 × 2.‍35
2083
24 × 1-1/8
1795
26 × 3.‍00
2170
24 × 1-1/4
1905
27 × 1
2145
24 × 1.‍75
1890
27 × 1-1/8
2155
16
Appendix
Wheel Size
L (mm)
27 × 1-1/4
2161
27 × 1-3/8
2169
650 × 35A
2090
650 × 38A
2125
650 × 38B
2105
700 × 18C
2070
700 × 19C
2080
700 × 20C
2086
700 × 23C
2096
700 × 25C
2105
700 × 28C
2136
700 × 30C
2170
700 × 32C
2155
700C Tubular
2130
700 × 35C
2168
700 × 38C
2180
700 × 40C
2200
Software License Agreement
BY USING THE DEVICE, YOU AGREE TO BE BOUND BY
THE TERMS AND CONDITIONS OF THE FOLLOWING
SOFTWARE LICENSE AGREEMENT.‍ PLEASE READ THIS
AGREEMENT CAREFULLY.‍
Garmin Ltd.‍ and its subsidiaries (“Garmin”) grant you a limited
license to use the software embedded in this device (the
“Software”) in binary executable form in the normal operation of
the product.‍ Title, ownership rights, and intellectual property
rights in and to the Software remain in Garmin and/or its thirdparty providers.‍
You acknowledge that the Software is the property of Garmin
and/or its third-party providers and is protected under the United
States of America copyright laws and international copyright
treaties.‍ You further acknowledge that the structure,
organization, and code of the Software, for which source code is
not provided, are valuable trade secrets of Garmin and/or its
third-party providers and that the Software in source code form
remains a valuable trade secret of Garmin and/or its third-party
providers.‍ You agree not to decompile, disassemble, modify,
reverse assemble, reverse engineer, or reduce to human
readable form the Software or any part thereof or create any
derivative works based on the Software.‍ You agree not to export
or re-export the Software to any country in violation of the export
control laws of the United States of America or the export
control laws of any other applicable country.‍
Appendix
17
Index
A
accessories 8, 11, 15
activity tracking 3, 13
alarms 14
alerts 12, 13
ANT‍+ sensors 8, 11
pairing 10
applications 6
smartphone 6
Auto Lap 13
Auto Pause 12
Auto Scroll 13
B
backlight 1, 14
battery
charging 1
maximizing 6, 7, 13, 15
replacing 14, 15
Bluetooth technology 1, 6, 13
C
cadence 8, 12
calendar 4
calorie, alerts 12
charging 1
cleaning the device 14
clock 12–14
coordinates 7
courses 7, 8
deleting 8
loading 7
customizing the device 12
cycling 10
D
data
recording 14
storing 6
transferring 6
data fields 12
deleting
all user data 6, 15
history 5
personal records 5
distance, alerts 12
drills 2
E
elevation 7
F
foot pod 1, 11
G
Garmin Connect 3, 4, 6, 7
storing data 6
Garmin Express 6
registering the device 15
updating software 15
GLONASS 14
goals 4, 5
GPS 1, 3, 13, 14
signal 15
ground contact time 8
H
heart rate 1, 12
monitor 8–10, 14, 15
zones 5, 10, 16
history 5, 6, 14
deleting 5
sending to computer 6
I
icons 1
indoor training 3, 11
intervals 2
workouts 4
18
K
keys 1, 14
L
language 13
laps 1
lengths 2
locations 7
deleting 7
editing 7
M
maps 7
updating 15
menu 1
metronome 12
multisport 2, 5
N
navigation 7
stopping 8
notifications 13
P
pace 12, 14
pairing, smartphone 6
pairing ANT‍+ sensors 10
personal records 5
deleting 5
pool size 2
power (force) 1
meters 9, 11
zones 11
product registration 15
profiles 2, 11, 12
activity 1, 2
user 11
projected finish time 4
troubleshooting 9, 15, 16
U
UltraTrac 13
unit ID 15
units of measure 14
updates, software 15
uploading data 6
USB 15
disconnecting 6
user data, deleting 6
user profile 11
V
vertical oscillation 8
vibration 14
VIRB remote 11
Virtual Partner 4, 5
VO2 max. 4, 9, 10, 16
W
walking intervals 12
watch mode 13, 15
wheel sizes 16
Wi‑Fi 1, 15
connecting 6, 7
workouts 3, 4
loading 3
Z
zones
heart rate 10
power 11
time 13
R
racing 5
recovery 10
registering the device 15
replacing the battery 15
resetting the device 15
running dynamics 8, 9
S
satellite signals 15
saving activities 1, 2
screen 14
settings 12–15
device 13, 14
shortcuts 1
sleep mode 3
smartphone
applications 6
pairing 6
software
updating 15
version 15
software license agreement 17
specifications 14
speed 14
speed and cadence sensors 1
strokes 2
swimming 2, 3, 5
swolf score 2
system settings 13
T
target 4, 5
time 12, 14
alerts 12
settings 13
time zones 13
timer 1, 2, 5
tones 12, 14
training 1, 4–6, 12
plans 3, 4
triathlon training 2
Index
www.garmin.com/support
+43 (0) 820 220230
+ 32 2 672 52 54
0800 770 4960
1-866-429-9296
+385 1 5508 272
+385 1 5508 271
+420 221 985466
+420 221 985465
+ 45 4810 5050
+ 358 9 6937 9758
+ 331 55 69 33 99
+ 39 02 36 699699
(+52) 001-855-792-7671
0800 0233937
+47 815 69 555
00800 4412 454
+44 2380 662 915
(+35) 1214 447 460
+386 4 27 92 500
0861 GARMIN (427 646)
+27 (0)11 251 9999
+34 93 275 44 97
+ 46 7744 52020
+886 2 2642-9199 ext 2
0808 238 0000
+44 (0) 870 8501242
+49 (0)180 6 427646
20 ct./Anruf. a. d.
deutschen Festnetz,
Mobilfunk max. 60 ct./Anruf
913-397-8200
1-800-800-1020
© 2014 Garmin Ltd. or its subsidiaries