Gateway E-9525R Network Card User Manual

Contents
Using Your EV730 Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Setting up the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Removing the base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Starting the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Adjusting monitor settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
OSD options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Software controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Energy declaration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
No picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Picture is scrambled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Display colors are wrong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Picture is fuzzy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Picture bounces, jitters, or has waves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Picture has shadows or “ghosts” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Color is not uniform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Image is not sized or centered correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Image cannot be adjusted full screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Safety, Regulatory, and Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . 23
i
ii
Using Your
EV730 Monitor
1
The EV730 monitor is a high-resolution color monitor with:
■
1280 × 1024 maximum resolution
■
Unlimited colors
■
Excellent contrast and legibility
■
Reduced power usage
The microprocessor-based on-screen display (OSD) controls
let you adjust a variety of image settings.
1
Chapter 1: Using Your EV730 Monitor
Setting up the monitor
Setting up the monitor consists of two procedures: attaching the base and
connecting the monitor cables. If you are setting up your computer for the first
time, see the setup poster for more information about connecting additional
peripheral devices.
To attach the base:
1
Carefully set the monitor on its side with the bottom of the monitor facing
you.
2
Hold the base so the rounded end is pointing toward the back of the
monitor, then align the hooks on the bottom of the base with the
corresponding slots on the bottom of the monitor.
Retaining latch
2
3
Slide the base toward the front of the monitor so all hooks are securely in
place. The retaining latch clicks into place when the base is attached
correctly.
4
Carefully set the monitor upright and place it on a sturdy, level surface.
www.gateway.com
Setting up the monitor
To connect the power and video cables:
1
Position the monitor and your computer so you can easily get at the back
panel of each. Make sure that all power cables can reach a correctly
grounded electrical outlet.
2
Connect the video cable to the matching (blue) video port on the back of
your computer.
3
Tighten the screws on the video cable connectors to keep them from
coming loose. Tightening the screws also prevents radio and TV
interference.
www.gateway.com
3
Chapter 1: Using Your EV730 Monitor
4
4
Connect the power cord that came with the monitor to the AC power
connector at the back of the monitor. To maintain FCC standards, only
use the cord that came with the monitor.
5
Plug the other end of the power cord into a correctly grounded electrical
outlet.
www.gateway.com
Setting up the monitor
Removing the base
To remove the base:
1
2
Turn off your computer, then disconnect the monitor’s power cable.
3
Rotate the base so you can easily get to the retaining latch on the bottom
of the monitor, then press in the retaining latch.
4
While pressing in the latch, slide the base toward the back of the monitor,
then remove the base.
Carefully set the monitor on its side with the bottom of the monitor
facing you.
www.gateway.com
5
Chapter 1: Using Your EV730 Monitor
Starting the monitor
To start the monitor:
1
Press the power button. The power LED turns green, and the monitor
demagnetizes itself for about three seconds.
Left
arrow
Menu
button
6
Select
button
Right
arrow
www.gateway.com
Power
button
Power
LED
Starting the monitor
Caution
Do not store tapes or diskettes next to the monitor because
the monitor generates a strong magnetic field during
startup. This field can erase or damage data stored on
magnetic tapes or diskettes.
2
3
Turn on your computer.
4
Adjust the controls to get the ideal image size and position for you. For
more information, see “Adjusting monitor settings” on page 8.
After your computer is running, the power LED on the monitor should be
green. If not, check the connections. For more troubleshooting
information, see “Troubleshooting” on page 17.
www.gateway.com
7
Chapter 1: Using Your EV730 Monitor
Adjusting monitor settings
This monitor features an on-screen display (OSD) that lets you adjust and save
contrast, brightness, and other settings for the display image.
■
Menu. Press to view the OSD. Press again to exit.
■
(left). Press to move between the OSD options. After selecting an
option, use to adjust the setting.
■
(right). Press to move between the OSD options. After selecting an
option, use to adjust the setting.
■
Select. Press to select an OSD option.
The monitor saves any changes you make to the settings, even if you turn off
the monitor.
To adjust the monitor settings:
1
2
3
4
5
8
Press the Menu button. The OSD menu opens.
Use the
and
buttons to highlight a menu option.
Press the Select button to select the highlighted menu option, then use
the
and
buttons to adjust it.
Press the Select button to return to the Main menu.
When you have finished making all adjustments, press the Menu button
to exit the OSD.
www.gateway.com
Adjusting monitor settings
OSD options
Main menu
Option
Contrast. Increases or decreases display image contrast.
Brightness. Increases or decreases display image brightness.
Horizontal Position (H Position). Moves the display image to the left
or right side of the screen.
Horizontal Size (H Size). Increases or decreases the width of the
display image.
Vertical Position (V Position). Moves the display image to the top
or bottom of the screen.
Vertical Size (V Size). Increases or decreases the height of the
display image.
Pincushion. Curves the sides of the display image inward or outward.
Trapezoid. Increases or decreases the trapezoid distortion of the
display image.
Pin Balance. Curves the display image to the left or right.
Parallelogram. Slants the display image to the left or right.
Tilt. Rotates the display image.
Horizontal Moire (H Moire). Blurs the focus slightly to minimize the
horizontal line pattern which results from interference.
Vertical Moire (V Moire). Blurs the focus slightly to minimize the
vertical line pattern which results from interference.
Color. Adjusts color balance.
R
Recall. Resets the monitor settings to the factory default settings.
www.gateway.com
9
Chapter 1: Using Your EV730 Monitor
Main menu
Option
Language. Changes the display language for the OSD control
system.
Degauss. Demagnetizes the screen.
USER
10
Information. Displays the frequency and resolution in which the
monitor is currently operating.
www.gateway.com
Adjusting monitor settings
Software controls
Adjusting the color depth and screen resolution are two of the most basic
monitor settings you may need to change.
Adjusting the color depth
Color depth is the number of colors the video card uses. Most images look best
displayed with the maximum number of colors available.
Windows lets you choose from several color depth settings for the monitor. We
recommend that you use the 32-bit True Color setting or the highest setting
available at all times.
If the color in your images seems “false” or “jumpy,” especially after you have
played a game or run a video-intensive program, check the color depth setting
and return it to 32-bit True Color, if necessary.
To change the color depth:
1
In Windows XP, click Start, then click Control Panel. The Control Panel
window opens. If your Control Panel is in Category View, click
Appearance and Themes.
- OR In Windows 2000, click Start, Settings, then click Control Panel. The
Control Panel window opens.
2
Click/Double-click the Display icon. The Display Properties dialog box opens.
www.gateway.com
11
Chapter 1: Using Your EV730 Monitor
3
Click the Settings tab.
3
4
Click the arrow button to open the Color quality or Colors list, then click
the color depth you want.
5
To save your changes in Windows XP, click OK, then click Yes.
- OR To save your changes in Windows 2000, click OK, then click OK again
Help and
Support
For more information about adjusting display settings in
Windows XP, click Start, then click Help and Support.
Type the keyword changing display settings in the
HelpSpot Search box
, then click
the arrow.
12
www.gateway.com
Adjusting monitor settings
Adjusting the screen resolution
You can change the screen resolution to a size you prefer. For example, you
can increase the resolution to fit more icons on your desktop, or you can
decrease the resolution to make reading and identifying objects on the monitor
easier. The higher the resolution, the smaller individual components of the
screen (such as icons and menu bars) appear.
To change the screen resolution:
1
In Windows XP, click Start, then click Control Panel. The Control Panel
window opens. If your Control Panel is in Category View, click
Appearance and Themes.
- OR In Windows 2000, click Start, Settings, then click Control Panel. The
Control Panel window opens.
2
3
Click/Double-click the Display icon. The Display Properties dialog box opens.
Click the Settings tab.
3
www.gateway.com
13
Chapter 1: Using Your EV730 Monitor
4
5
Drag the Screen resolution or Screen area slider to the size you prefer.
To save your changes in Windows XP, click OK, then click Yes.
- OR To save your changes in Windows 2000, click OK, then click OK again.
Help and
Support
For more information about adjusting screen resolution in
Windows XP, click Start, then click Help and Support.
Type the keyword changing screen resolution in the
HelpSpot Search box
, then click
the arrow.
14
www.gateway.com
Power management
Power management
ENERGY STAR
As an ENERGY STAR® Partner, Gateway has determined that this product meets
the ENERGY STAR guidelines for energy efficiency.
This monitor complies with the EPA's International ENERGY STAR Program,
which is a program designed to encourage manufacturers of computer
equipment to build circuitry into their products to reduce energy consumption
during time of non-use.
Energy declaration
When connected to a computer that supports the Display Power Management
Signaling (DPMS) Protocol, this monitor can conserve significant energy by
reducing power consumption during periods of non-use. When your computer
goes into the energy saving mode, the monitor will then enter the Active Off
mode (different from total shut down). In the Active Off mode the power LED
will still show orange.
Use these conventions and the power can be reduced to the following levels:
State
LED color
Power consumption
On
Green
74 W
Active Off
Orange
Less than or equal to 8 W
To “wake” the monitor when it is in Active Off mode, move your mouse or
press any keyboard key.
Access the power management options in the Control Panel to change the
period of time after which the monitor enters these low power states.
www.gateway.com
15
Chapter 1: Using Your EV730 Monitor
Maintenance
To keep the monitor in optimal working order:
■
Do not block the ventilation holes.
■
Do not expose the monitor to rain or use near water.
■
Keep the monitor away from radiators or heat vents.
■
Keep the monitor out of direct sunlight.
■
Keep the monitor away from any equipment that generates a
magnetic field.
■
Use a screen saver to avoid permanent phosphor discoloration. For more
information about screen savers, see the documentation that came with
your computer.
■
Clean the monitor using a soft cloth lightly moistened with water. Wipe
the cabinet, glass panel, and controls.
Caution
16
Do not use any type of abrasive pad or glass cleaner. You
will permanently scratch the glass panel.
www.gateway.com
Troubleshooting
Troubleshooting
If you have problems with the monitor, the information in this troubleshooting
section may help you solve them.
Important
Make sure that the monitor has warmed up for about
30 minutes before making any judgments about the
picture quality.
No picture
■
Make sure that the monitor is turned on.
■
Make sure that the power cord is connected correctly to both the back of
the monitor and the wall outlet. For more information about connecting
the power cord, see “Setting up the monitor” on page 2.
■
Make sure that the video cable is connected securely to the back of your
computer. For more information about connecting the video cable, see
“Setting up the monitor” on page 2.
■
If the power LED is orange or blinking orange:
■
■
Make sure that your computer is turned on.
■
Move the mouse or press any key on the keyboard to bring the
monitor out of Active Off mode.
■
Restart your computer with the monitor turned on.
■
Make sure that the video cable is not damaged.
■
Check the video port and the end of the video cable for any pins that
might be bent or pushed in.
Turn off the monitor and unplug the video cable from the back of your
computer. Turn the monitor back on and wait for ten seconds. If the
monitor is functioning correctly, a self-diagnostic screen appears.
www.gateway.com
17
Chapter 1: Using Your EV730 Monitor
Picture is scrambled
If the picture is scrambled or does not look right, you can reset the monitor
to its default video mode and resolution settings.
To reset the monitor settings:
1
Restart your computer, then press and hold F8 while your computer is
starting up.
2
Select Safe Mode or Enable VGA Mode, then press Enter. Your computer
restarts.
3
In Windows XP, click Start, then click Control Panel. If your Control Panel
is in Category View, click Appearance and Themes.
- OR In Windows 2000, click Start, Settings, then click Control Panel.
4
5
6
7
Click/Double-click the Display icon. The Display Properties dialog box opens.
Click the Settings tab.
Drag the Screen Resolution or Screen area slider to the size you prefer. If
you are not sure what resolution to use, select 800 × 600.
To save your changes in Windows XP, click OK, then click Yes.
- OR To save your changes in Windows 2000, click OK, then click OK again.
8
If prompted, restart your computer.
The mode you have chosen should allow you to use your computer or select
a different resolution or number of colors (select the maximum number
possible). If the settings selected are beyond the monitor’s display
capabilities, the operating system restores the image back to the last saved
settings in 15-20 seconds.
18
www.gateway.com
Troubleshooting
Display colors are wrong
■
Restart your computer with the monitor turned on.
■
Make sure that the video cable is connected securely to the back of your
computer. For more information about connecting the video cable, see
“Setting up the monitor” on page 2.
■
Make sure that the video cable is not damaged.
■
Check the video port and the end of the video cable for any pins that might
be bent or pushed in.
Picture is fuzzy
Adjust the contrast and brightness controls to improve the display image. For
more information, see “Adjusting monitor settings” on page 8.
Picture bounces, jitters, or has waves
Make sure that:
■
Non-shielded speakers are not placed too close to the monitor.
■
The monitor is not positioned too close to another monitor, power
transformer or adapter, electric fan, fluorescent light, metal shelf, or laser
printer.
If none of these suggestions solves the problem, try plugging the monitor into
another outlet, preferably one on a different circuit.
Picture has shadows or “ghosts”
■
Remove any extension cables or switchboxes.
■
Make sure that the video cable is connected securely to the back of your
computer. For more information about connecting the video cable, see
“Setting up the monitor” on page 2.
■
Make sure that the video cable is not damaged.
■
Check the video port and the end of the video cable for any pins that might
be bent or pushed in.
www.gateway.com
19
Chapter 1: Using Your EV730 Monitor
Color is not uniform
Make sure that the monitor warms up for at least 30 minutes before making a
final judgment about color uniformity.
Make sure that:
■
Non-shielded speakers are not placed too close to the monitor.
■
The monitor is not positioned too close to another monitor, power
transformer or adapter, electric fan, fluorescent light, metal shelf, or laser
printer.
■
You demagnetize the screen using the Degauss feature in the OSD. For
instructions on how to degauss the monitor, see “Adjusting monitor
settings” on page 8.
Image is not sized or centered correctly
Use the size and position controls to adjust the image. For instructions on how
to change the monitor settings, see “Adjusting monitor settings” on page 8.
Image cannot be adjusted full screen
Some video modes used by the monitor produce images that cannot be adjusted
all the way out to the bezel edge (the edge where the screen glass and monitor
casing meet).
This condition does not indicate that the monitor is defective.
20
www.gateway.com
Specifications
Specifications
Specifications are subject to change without notice or obligation.
CRT
17 inches diagonal (15.9 inches viewable),
anti-reflective/anti-glare, 90° deflection, 0.27 mm dot pitch
Maximum resolution
1280 × 1024 non-interlaced
Display colors
Unlimited
Frequency range
Horizontal, 30-70 kHz
Vertical, 50-160 Hz
Power input
100-240 V 50/60 Hz 2.0 A
Certifications
UL, cUL, EPA, FDA, and FCC Class B
Power management
Meets International ENERGY STAR requirements:
Active Off mode = less than or equal to 8 W
Environment
Operating temperature: 41° to 104°F (5° to 40°C)
Operating humidity: 5% to 90%
Many products for Gateway and its subsidiaries are custom engineered by our
suppliers to Gateway specifications and may vary with similarly marketed
products.
www.gateway.com
21
Chapter 1: Using Your EV730 Monitor
22
www.gateway.com
Safety,
Regulatory, and
Legal Information
A
Important safety
information
Your Gateway system is designed and tested to meet the latest standards
for safety of information technology equipment. However, to ensure safe
use of this product, it is important that the safety instructions marked on
the product and in the documentation are followed.
Warning
Always follow these instructions to help
guard against personal injury and damage
to your Gateway system.
23
Appendix A: Safety, Regulatory, and Legal Information
Setting up your system
24
■
Read and follow all instructions marked on the product and in the documentation before you
operate your system. Retain all safety and operating instructions for future use.
■
Do not use this product near water or a heat source such as a radiator.
■
Set up the system on a stable work surface.
■
The product should only be operated from the type of power source indicated on the rating label.
■
If your product has a voltage selector switch, make sure that the switch is in the proper position
for your area. The voltage selector switch is set at the factory to the correct voltage.
■
Openings in the monitor case are provided for ventilation. Do not block or cover these openings.
Make sure you provide adequate space, at least 6 inches (15 cm), around the system for
ventilation when you set up your work area. Never insert objects of any kind into the monitor
ventilation openings.
■
Some products are equipped with a three-wire power cord to make sure that the product is
properly grounded when in use. The plug on this cord will only fit into a grounding-type outlet.
This is a safety feature. If you are unable to insert the plug into an outlet, contact an electrician
to install the appropriate outlet.
■
If you use an extension cord with this system, make sure that the total ampere rating on the
products plugged into the extension cord does not exceed the extension cord ampere rating.
■
If your system is fitted with a TV Tuner, cable, or satellite receiver card, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage
surges and buildup of static charges.
www.gateway.com
Important safety information
Care during use
■
Do not walk on the power cord or allow anything to rest on it.
■
Do not spill anything on the system. The best way to avoid spills is to avoid eating and drinking
near your system.
■
Do not expose the monitor to rain or use near water. If the monitor does get exposed to
moisture, unplug it and allow it to dry for 24 hours. Call Gateway Technical Support for advice
on whether the monitor is safe to turn back on.
■
When the monitor is turned off, a small amount of electrical current still flows through the
monitor. To avoid electrical shock, always unplug all power cables and modem cables from the
wall outlets before cleaning the system.
■
Unplug the system from the wall outlet and refer servicing to qualified personnel if:
■
The power cord or plug is damaged.
■
Liquid has been spilled into the system.
■
The system does not operate properly when the operating instructions are followed.
■
The system was dropped or the cabinet is damaged.
■
The system performance changes.
Warning
To prevent electric shock, never remove the cover. No user
serviceable parts inside. Refer servicing to qualified
service personnel.
Replacement parts and accessories
Use only replacement parts and accessories recommended by Gateway.
Important
Do not use Gateway products in areas classified as
hazardous locations. Such areas include patient care
areas of medical and dental facilities, oxygen-laden
environments, or industrial facilities.
www.gateway.com
25
Appendix A: Safety, Regulatory, and Legal Information
Regulatory compliance
statements
United States of America
Federal Communications Commission (FCC)
Unintentional emitter per FCC Part 15
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
interference to radio and television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
■
Reorient or relocate the receiving antenna
■
Increase the separation between the equipment and receiver
■
Connect the equipment to an outlet on a different circuit from that to which the receiver is
connected
■
Consult the dealer or an experienced radio/TV technician for help.
Compliance Accessories: The accessories associated with this equipment are: shielded video cable.
These accessories are required to be used in order to ensure compliance with FCC rules.
FCC declaration of conformity
Responsible party:
Gateway Companies, Inc.
610 Gateway Drive, North Sioux City, SD 57049
(605) 232-2000 Fax: (605) 232-2023
This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
Caution
26
Changes or modifications not expressly approved by
Gateway could void the FCC compliance and negate your
authority to operate the product.
www.gateway.com
Regulatory compliance statements
Canada
Industry Canada (IC)
Unintentional emitter per ICES-003
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage
radioélectrique édicté par Industrie Canada.
EPA ENERGY STAR
As an ENERGY STAR® Partner, Gateway has determined that this product
meets the ENERGY STAR guidelines for energy efficiency when used with a
computer equipped with a Display Power Management System.
California Proposition 65 Warning
Warning
This product contains chemicals, including lead, known to
the State of California to cause cancer and/or birth defects
or reproductive harm.
www.gateway.com
27
Appendix A: Safety, Regulatory, and Legal Information
Notices
Copyright © 2003 Gateway, Inc.
All Rights Reserved
14303 Gateway Place
Poway, CA 92064 USA
All Rights Reserved
This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or
transmitted by any means or in any form, without prior consent in writing from Gateway.
The information in this manual has been carefully checked and is believed to be accurate. However, changes are
made periodically. These changes are incorporated in newer publication editions. Gateway may improve and/or
change products described in this publication at any time. Due to continuing system improvements, Gateway is
not responsible for inaccurate information which may appear in this manual. For the latest product updates,
consult the Gateway Web site at www.gateway.com. In no event will Gateway be liable for direct, indirect, special,
exemplary, incidental, or consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages.
In the interest of continued product development, Gateway reserves the right to make improvements in this
manual and the products it describes at any time, without notices or obligation.
Trademark Acknowledgments
1-800-GATEWAY, ActiveCPR, ALR, AnyKey, black-and-white spot design, CrystalScan, Destination, DestiVu, EZ
Pad, EZ Point, Field Mouse, Gateway 2000, Gateway Country, gateway.net, Gateway stylized logo, Perfect
Scholar, Solo, TelePath, Vivitron, stylized “G” design, and “You’ve got a friend in the business” slogan are
registered trademarks and black-and-white spotted box logo, GATEWAY, Gateway Astro, Gateway@Work,
Gateway Connected touch pad, Gateway Connected music player, Gateway Cyber:)Ware, Gateway
Education:)Ware, Gateway Flex Case, Gateway Gaming:)Ware, Gateway GoBack, Gateway Gold, Gateway
Learning:)Ware, Gateway Magazine, Gateway Micro Server, Gateway Money:)Ware, Gateway Music:)Ware,
Gateway Networking Solutions, Gateway Online Network (O.N.) solution, Gateway Photo:)Ware, Gateway
Professional PCs, Gateway Profile, Gateway Solo, green stylized GATEWAY, green stylized Gateway logo,
Gateway Teacher:)Ware, Gateway Video:)Ware, HelpSpot, InforManager, Just click it!, Learn@Gateway, Kids
BackPack, SERVE-TO-ORDER, Server Watchdog, the Spotted G Gateway Logo and the Spotted G Logo,
SpotShop, Spotshop.com, and Your:)Ware are trademarks of Gateway, Inc. Intel, Intel Inside logo, and Pentium
are registered trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and Windows
are trademarks or registered trademarks of Microsoft Corporation. All other product names mentioned herein are
used for identification purposes only, and may be the trademarks or registered trademarks of their respective
companies.
28
www.gateway.com