OBDII Vagcom 908 Diagnostic Software User manual

Below you will find brief information for Diagnostic Software Vagcom 908. This document outlines the steps for installing the Vagcom 908 diagnostic software on a Windows XP system. The manual starts with setting the computer's system time to February 2009 and closing any antivirus software. It then guides you through connecting the Vagcom 908 cable to the computer and installing the necessary drivers. This includes troubleshooting steps if the installation fails. The manual concludes with configuring the software's communication port and accessing the diagnostic software's main interface.

PDF
Document
Diagnostic Software Vagcom 908 User Manual | Manualzz
/

Key features

  • Windows XP Compatibility

  • Anti-Virus Software Deactivation

  • Driver Installation Guide

  • Troubleshooting Installation Issues

  • Communication Port Configuration

  • Diagnostic Software Access

Frequently asked questions

The software requires a Windows XP operating system.

The manual provides troubleshooting steps for installation issues, including checking device manager for errors and reconnecting the cable.

The manual explains how to choose the USB communication port setting within the software.

The right corner of the computer should prompt you to install a new drive. Follow the prompts to install the necessary drivers.

Preparing document for printing…
0%