GE 2-9710 Telephone User Manual
Add to my manuals26 Pages
The GE 2-9710A offers a seamless blend of telephone and clock radio functionalities, designed to provide convenience and efficiency in your daily life. With its advanced features, this device enhances your communication and time management experiences. Here are some of its key capabilities:
-
Quick Dial: Store and instantly dial up to three important phone numbers using dedicated one-touch buttons (A, B, C) for quick and easy access.
-
Memory Dialing: Take advantage of the 12 memory locations to store and automatically dial frequently called or emergency numbers with just two simple touches.
advertisement
.. . . .
.:
— —-
—— . .
.
..”
,.
–~~
.
. .
. .
.
,,
.
.’
. .
..-
.:..
:
.. .. .
. . -. ..:
. .-:,:..
.. . . .
:.
. . .. .
. .-:..:,
TABLE OF CONTENTS
SECTION
PAGE
IN PRODUCTION . . . . . . . . . . . . . . . . . . . . . . . ...3
A.
Parts Checklist . . . . . . . . . . . . . . . . . . . ...3
CONTROLS and FEATURES
. . . . . . . . . . . . . ...4
A.
Telephone Controls . . . . . . . . . . . . . . . ...5
8.
Telephone Features . . . . . . . . . . . . . . . ...5
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . ...6
A.
introduction...-.....,..
. . . . . . . . . ...6
E.
installation . . . . . . . . . . . . . . . . . . . ...6-7
TELEPHONE OPERATION
A. Introduction . . . . . . . . . . . . . . . . . . . . . ...8
8. How to Make and Receive Calls . ...-..8
C. Automatic Radial . . . . . . . . . . . - -.......8
TELEPHONE MEMORY
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . ...9
A, Introduction . . . . . . . . . . . . . . . . . . . . . ...9
8.
How to Store . . . . . . . . . . . . . . . . . . . . ...9
C.
~owto Dial aStored~umber . . . . . ...10
0.
How to Chain Dial Using Memory . . ...10
E.
Storing aPause in Dialing . . . . . . . . ...11
F.
PAEXand P8X use . . . . . . . . . . . . . . ...11
G. Changing or Correctinga
Stored ~umber . . . . . . . . . . . . . . . . . . ...11
PRUDUCT CARE . . . . . . . . . . . . . . . . . . .-.....12
A.
To Xeplace 6ackup6attery . . . . . . . ...12
8.
8atte~ Safety Precautions . . . . . .. . . ...12
C.
General Product Care . . . . ..-~ . . . . ...13
D. Replaceable Telephone Cord . . . . . . ...13
TELEPHONE SERVICE . . . . . . . . . . . . . . . . . ...14
A.
Sewice Checklist . . . . . . . . . . . . . . . . ...14
S~CTION
PAGE
TWO YEAR LIMITED WARRANTY
TELEPHONE . . . . . . . . . . . . . . . .
. . . . . . . . . ..I5
SERVICE INFORMATION . . . . . . . . . . . . . . . ...15
FCCREGiSTRAT!ON
INFORMATION
. . . . . . . . . . . . . . . -...........16
INTERFERENCE INFORMATION . . . . . . . . . ...16
HEARING AID
COMPATIBILITY . . . . . . . . . . . . .
. . . . . . . . . ...16
CLOCK RADIO CONTROLS andFEATVRES.
A.
Clock Radio Controls
.17
and Features . . . . . . . . . . . . . . . . . . . ...17
CLOCK RADIO OPERATION
. . . . . . . . . . . . ...18
A.
B.
c.
Introduction . . . . . . . . . . . . . . . . . . . . ...18
Power Failure Indicator . . . . . . . . . . . ...18
Radio Operation . . . . . . . . . . . . . . . . . ...18
D.
E.
Automatic Radio Muting . . . . . . . . . . ...18
8uilt-in AFC . . . . . . . . . . . . . . . . . . . . ...18
F.
G.
H.
Antennas . . . . . . . . . . . . . . . . . . . . . . ...19
Time Set . . . . . . . . . . . . . . . . . . . . . . . ...19
Minutes and Seconds
Time Display . . . . . . . . . . . . . . . . . . . ...19
Wake Time . . . . . . . . . . . . . . . . . . . . . ...19
1.
J.
K.
L.
M.
Wake to Radio or Alarm....
. . . . . . ...20
Sleep to the Radio . . . . . . . . . . . . ...20-21
Snooz-Alarm . . . . . . . . . . . . . . . . . . . . . ..2I
“NoWorry” Battery Backup System . ..21
TWO YEAR LIMiTED WARRANTY
FM/AMCLOCK . . . . . . . . . . . . . . . . . . . . . . . ...22
ACCESSORY
ORDER FORM . . . . . .. OUTLD-OUT
WARNING:
TO PREVENT FIRE
OR ELECTRIC SHOCK HAZARD,
00 NOT EXPOSE THIS PRODUCT
TO RAINOR MOISTURE.
A-
-
A’
THE L~HTNtNGCAUTION:
~ASHANDARROW-RIsKOFELECTRIC
THE THEEXCLAMATION
SHOCKIPOINTWITHINTHE
HEAOWrTMNTHE 00 NOT REMOVE
COVER
TRIANGLE IS A
TRIANGLE &
A (OR BACK). NO USER- WARNING SIGN
YOUOF
WARNING SIGN SERVICEABLE
YOUOF SIOE. REFER SERVICINGIMPORTANT
“DANGEROus TO QUALIFIEDSERVICElNsTRucTloNs
VOLTAGE- INSIDEPERSONNEL.
THEPROOUCT.
ACCOMPANYING
THEPROOUCT.
..
.
2
.“
.
.
INTRODUCTION
Thank
YOU for purchasing a Clock Radio Telephone from GE Communications Products.
Your new GE Model 2-9710 is a carefully engineered, high-qualiW, durable produ~ with natural sound quality, modern features and elegant styling.
It is designed to give YOUthe quality and convenience you expect in a telephone, and a clock radio.
TO familiarize yourself with all the features of your Clock Radio Telephone, please read the following instrutiions carefully.
Retain this Guide for future reference.
v
FCC NUMBER IS LOCATED ON THE BOTTOM OF BASE
REN NUMBER IS LOCATED ON THE BO~OM OF THE HANDSET
OTHER IMPORTANT INFORMATION ON PAGE 16 OF THIS GUIDE
1
J
:
A.
pafis
Check List
.
. .
.
.
.:.
. -
...
. ..-.
--
.1-.
,
-.
:“..
.
-..
... . .
.. . . .
-.
.
●
HANDSET
●
MSE UNIT
3
.-.
:.
.
.
..
.
. .
..
.
;“
...
,.:
CONTROLS and FEATURES
m
J
.
c
4
. ..
..
..
.
.. .
.
-..
. .
.:.
✎✎
-’.. .
-.-,
CONTROLS and FEATURES
1.
2.
Handset
Handset Hook Switch
3.
4.
5.
6.
Memo~
Dial Button — Used when dialing a number stored in memo~, locations 1-9.
Store Button — Stores phone number in a MEMORY location.
Redial Button — Redials the last number called. Also works as PAUSE for Memory after other numbers have been dialed.
Ringer Volume Switch — Adjusts the volume of the ringer (Hi or Lo) or to turn ringer off.
7.
8.
Microphone
Earpiece
9.
10.
Quick Dial Buttons — Provide instant dialing of up to 3 important telephone numbers by pressing
A, B or C.
Dialing Mode Switch — Sets the dialing mode for either
Tone or Pulse (for rotary service).
11.
12.
13.
14.
Lithium Battery Cornpafiment
— Located on the botiom of the telephone handset.
(Long-Life Lithium Battery Cartridge is included).
Telephone Number Display
Te!ephone Line Cord
Coiled Cord — Connects the handset to the base unit.
15.
16.
17.
AC Power Cord
Memory Directo~
Base
●
●
12 Number Memo~ - Includes 3 positions for “One-touch” quick dialing for Emergency, etc. plus 9 additional memories for frequefitly called numbers.
Switchable Pulse~one
Dialing - Touch Tone or Pulse dialing, or any combination of Tone and Pulse, for access to long distance services.
Long Life Lithium BatteW - Provides Memory
Back-up.
:
●
●
●
●
●
●
●
●
●
●
●
:
:
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
-
●
1
A.
Telephone
Controls
B.
Telephone
Features
5
INSTALLATION
Follow these steps to connect your new telephone for proper operation. Make sure you have a modular telephone jack. A modular (Universal Sewice Order
Code) USOC: RJIIC outlet (illustrated) jack is required.
Installation of this telephone in locations with 4prong jacks or with hard-wired outlets will require additional
Converters (not included).
The dealer from whom you purchased your phone or a telephone supply store can advise you regarding the proper Convefier.
1.
Connect the Coiied
Plug COILED CORD
Place the HANDSET
Cord
into
the HANDSET jack.
in the BASE.
●
●
m
●
●
t
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
A.
Introduction
●
:
s
B.
installation
.
.. -.
#-
.-l..
...
.
.
..
.
.. .
. ..-:
.
2. Connect
the Telephone Line Cord
Plug the TELEPHONE LINE CORD into the telephone outlet. An RJIIC outlet jack
(illustrated) is required.
If you don’t have an
RJ1l C, an adapter can be purchased from any telephone store.
●
*
:
:
●
:
●
●
●
—
,’.
,.
.
6
.
. ...
. ..
.“
. .
...
.
.-.
-.,
..
. ..
.
..~,,
-..
.
.
.
..
. ....
:.
...
3. Piug in the AC Power Cord
This clock radio telephone operates on 120V
AC household power.
Plug the AC Power Cord into the AC power outlet.
4. The Pulse/Tone
Switch
The PULSE~NE switch located on the
HANDSET
should be set to the proper position.
The switch should be set to TONE if you have “touch tone” sewice.
Otherwise, set to PULSE.
Note: If you have pulse sewice, the switch may be changed to ~NE after dialing is completed.
This allows access to phone services that require a tone. Return switch to
PULSE when call is completed.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
c
●
:
●
●
5. Ringer
Volume
The RiNGER VOLUME switch located on the
HANDSET
can be set to the following:
HI — M=imum Volume
LO — Lower Volume
OFF — Ringer is not heard
Your installation is completed.
INSTALLATION
,.
. . .
..
7
.’
. .
. .-.
-.
,
..
$.
.
.
.
.....
... .
8
TELEPHONE OPERATION
The GE Model 2-9710 Clock Radio Telephone provides normal telephone operation along with storage of up to twelve telephone numbers in memory for automatic dia~ing of frequently called or s emergency numbers.
●
: s
●
●
●
To Make A Call
1.
Pick up HANDSET.
2.
Wait for dial tone.
3.
Dial telephone number.
4.
When finished, hang-up.
To Receive
a Call
1. When phone rings, pick up HANDSET and talk.
2. When finished, hang-up HANDSET.
Note: Make sure RINGER Switch is
not off.
Note:
HANDSET
must be returned to BASE for radio play and alarm system operation.
A.
introduction
.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
;
●
“
B.
HOW tO
Make and
Receive
Calls
The telephone automatically
(up to 32 digits long).
remembers the last number diaied
The number will remain in “REDIAU’ until another number is : dialed.
●
●
To redial a number that you dialed press
REDIAL,
●
●
●
●
●
●
●
8
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
:
●
●
C.
Automatic
..
..
. .
.:
.
.
..
TELEPHONE MENIORY OPERATION
Your new GE P~lcdel 2-97?0 Clock Radio Telephone has 12 memory locations capable of storing a telephone number of up to 16 digits.
Three telephone numbers can be stored in the 3 Quick
Dial positions and dialed with one touch. (For example: you may want to store emergency phone numbers for quick and easy access).
9 klemory positions are dialed with two touches
(&fE/VIORYD/AL and the number button 1-9 corresponding to’the memory location).
Impotiant:
Before you begin storing telephone numbers in memory you must set the PULSE/TONE switch to the correct position.
Quick Dial Numbers
1.
Pick up the HANDSET
2.
Push STORE.
3.
Enter the telephone number (it will not actually cali the number in this mode).
4.
Push STORE again.
5.
Push selected Quick Dial Location — A, 8 or C.
6.
Hang up HANDSET
7.
Write the name or number of party stored in memory location on klemory Directory Card.
~
CAUTION ~
WHEN MAKING
TEST
CALLS TO EMERGENCY NUMBERS:
1.
Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.
2.
Perform such activities in the off-peak hours, such as early morning hours or late evening.
Frequently Called Numbes
1.
Pick up the HANDSET
2.
Push STORE.
3.
Enter the telephone number (it will not actually call the number in this mode).
4.
Push STORE again.
5.
Push key pad 1, or 2..
., or 9 for memory location.
6.
Hang up
HANDSET
7.
Write the name or number of party stored in the memory location on htemory Directory Card.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
4
●
●
J
●
●
●
●
●
●
●
●
A.
Introduction
B.
HOW
Store
●
●
9
**a
to
9
...
.:
.,
-..
.,.
,.. ,
.
..
. .
..
;- -
. . -. .....
-. .
..
10
TELEPHONE MEMORY OPERATION
Quick
Dial Numbe~
1.
Pick up HANDSET
2.
Wait for Dial Tone.
3.
Press
A
or B or C.
Frequently Called Numbem in Memo~
1.
2.
Pick up
HANDSET
Wait for Dial Tone.
3.
Press MEMORY
DIAL.
4.
Press 1, or2.
. . . or 9.
This feature allows you to dial in succession a chain of numbers in different memo~ locations.
This is useful when you must dial more than one number in memory to complete a call, such as with frequent calls via an independent service (e.g. MCI or Sprint).
For example
Memoy Location
Local Access Number of Long
Distance Company and 2 or 3 pauses atend, press . . . . . . . . . . . . . . . . . . . ...6
Authorization Code (ID), press . . . . . . . . . . . . ...7
Long distance phone number, press . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...8
To Initiate Chain Dialing
1.
Press MEMORY
DIAL.
2.
Press 6.
3.
Press MEMORY
DIAL.
4.
Press 7.
5.
Press MEMORY
DIAL.
6.
Press 8.
●
●
●
●
●
●
●
1
●
●
●
●
●
●
●
●
C. How to Dial
a
Stored
~
[
BP’
I
@c
Bc
mc
;
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
✎
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
D.
HOW to
Chain
Dial
Using the
Memo~
. .
..
..:
.,
..- ,. .
,.,
.
.
>
. .
. .
~+
,... . . .
---
. . ... . .
.
‘.
TELEPHONE MEMORY OPERATION
When storing a number, a momentary delay may be needed in the dialing sequence for a stored telephone number.
This is generally used when a “PAUSE” is needed to wait for a dial tone
(e.g. after dialing a long distance access number).
The REO/AL button should be pressed at the point where a pause is needed in the dialing sequence.
During storage, pushing the REDiAL button sewes to store a pause in the dialing sequence as often as needed.
Note: The REDiAL key will place a pause in the dialing sequence anytime it is pres~ afier dialing a number. When storing PAUSE in MEMORY, each PAUSE counts as one stored digit.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
9
E. storing a
Pause in
Dialing
-—-
MemoW and Redial may require the use of a “PAUSE” when initially-dialing or storing-outside numbers. The’ sequence, then, for dialing or storing an outside number would be, for exampIe:
9 REDIAL 12345&
Hm to Change a Stoti Numhr
Rewat the storage sequena.
me nw number will repla~ the old number at the memo~ l-ion.
HW to Clear a Stoti Nu*r
Re~at the storage sequen=.
Skip step 3 in the sequenm ~.e. do not enter a telephone number). The storage Itiion will be blank when ~uenm is mmpleted.
Hw to &M an Emr Mile Storing
Simp~ hang up and repeat the ptiure beginning.
for stoting from the
.
:
z
s
●
●
●
F.
PABX
and
PBX Use
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
G.
changing or
11
.. .
-
.
..
-.
.. .
..
-., .-
,.’
. ..,.
. .
... .
PRODUCT CARE
A consumer replaceable long-life Lithium Battery (3V) is installed in the phone to provide back-up power for retaining numbers in memory. The Lithium 8atte~ compartment is located on the bottom of the telephone handset.
1. Unplug
the power telephone outlet.
cord
and unplug PHONE LINE from
:
:
●
●
●
●
●
●
●
●
●
●
A.
To
Repiace
Backup
Batte~
2. Remove TELEPHONE NUMBER PLASTIC COVER and
CARD to expose battery holder.
Note: Insert pointed object into hole in PUSTIC
COVER
and lift. Then remove COVER and CARD.
:
●
●
~
●
●
3. Unsnap the battery door
Using a screwdriver, insert in opening at either end of battery cafiridge, pop it up, Iifi batte~ out.
Dispose of battery cartridge.
Replace only with GE CAT.
#5-1923: When discarding batteries, be sure to dispose of them in the proper manner, according to your
state
and local regulations.
4. Replace
battery cartridge and door
Note: Cartridge can be inserted only one way.
5. Replace
Telephone Number Card and plastic cover.
6. Plug in the power Cord and plug in the PHONE CORD.
Note: Numbers in memo~ must be reprogrammed.
fir your safety, please follow these simple precautions:
●
Do not recharge, disassemble, mutilate, puncture, wet or
dispose of Batte~ in fire. Like other batteries of this type,
if it is burned or punctured, it could release toxic material
which could cause injury.
Keep Battery out of reach of children.
Replace only with GE Cat. #5-1923. Accessory Order
Form included in this guide.
●
●
●
●
●
●
●
a
●
●
●
●
●
●
~~
.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
✚
_
●
●
.
● z s
B.
Batte~
Safety
Precautions
12
.. -.
PRODUCT CARE
●
●
●
To keep your GE Telephone working and looking good, follow these
few simple rules:
J
●
●
Avoid putting telephone near heating appliances and devices that generate electrical noise. (i.e., motors, fluorescent lamps.)
●
Telephone should
not be exposed to
dir= sunlight or moisture.
g
“ - Avoid dropping the Handset and other
rough
treatment to the s phone.
.
;
● s Clean telephone with a soft cloth dampened with water.
(Remember to first unplug phone from wall outlet)
Never use a strong cleaning agent or abrasive powder, as this will damage the finish.
Retain the original packaging for future use.
:
‘@@
C.
General
Product
Care
Q
The telephone line cord (from handset to telephone wall
~@@
outlet) is one cord that can easily change its location.
This convenient feature allows you to change the location of the cord.
Your decision
as to the location of the line cord will
depend on where your unit is located in reference to the :
z
.
:
D.
Changing
Location of
Phone Cord
tejephone outlet.
To remove line cord from current location
1.
2.
Remove
MODULAR
PLUG from telephone wall outlet and ‘CREW
HANDSET.
●
Remove
SCREW
from TELEPHONE
CORD STRAIN
●
●
RELIEF
housing located on the bottom of the CLOCK
RADIO.
3.
Lift off HOUSING and unwrap CQHD from strain relief.
●
●
●
●
●
To move line cord to new location (on other side of base unit) :
1.
To install, WRAP CORD around the STRAIN
RELIEF
as indicated and, replace HOUStNG and SCREW.
-
2.
Plug MODULAR PLUG back into telephone wall outlet and HANDSET.
●
●
●
●
●
● s
E.
Replaceable
Telephone
The telephone cord (from handset to telephone wali outlet) is actua!ly
one cord which is easily replaced if damaged.
To replace
1.
Remove
MODULAR
HANDSET.
PLUG from telephone wall outlet and
2.
Remove SCREW
from TELEPHONE
CORD STRAIN
3.
RELIEF
housing located on the bottom of the CLOCK
RADIO.
Lift off HOUSING and unwrap cord from STRAIN
RELIEF.
●
●
●
●
●
●
●
●
●
●
s
To install replacement, wrap cord around the strain relief as
indicated and, replace housing
and screw.
13
CORD
.
...”
-.
..
.
..
.
;-
..:,
. .
..
. ..,.
:..
. .
TELEPHONE SERVICE
If your Telephone does not work properly, follow the Sewice Checklist.
If it is still inoperative then disconnect the Telephone and t~ another telephone to determine if the problem is with the telephone line. If it is the telephofle line, notify the telephone company for semice.
If the Telephone continues to malfunction, please make sure
YOU have followed the instructions in this manual to correct the problem.
all
If you continue to have problems, refer to the service information on page 15 of guide and the Telephone must be disconnected.
this
A. Sewice
Checklist
TELEPHONE
PROBLEM
1. No Dial tone
2. Phone does not dial
3. You cannot be heard by other party
4. Memory Dialing
Problems
5.
Incoming and
Outgoing voice volume is too low
6. Phone does not ring
7.
Tone Feedback
Flutter while dialing in pulse mode
8. Loss of Memory
SOWTION
. Check Cords to make sure they are inserted correctly,
●
Does HOOK SWITCH extend fully when handset is removed from cradle?
●
Check PULSE~NE position.
switch.
Place in the PULSE
●
Check that handset coil cord is fully inseded at both ends.
●
Did you program number correctly?
c Did you follow the proper dialing sequence?
●
Check that other phones are off hmk at the same time. If so, this is a normal condition as volume drops when additional phones are used at once.
. Is RINGER
SELECT set to OFF position?
●
Are you using too many phones on one line? The total
REN of all phones should not be greater than the maximum REN for your calling
area. (Usually maximum
REN is 5. See FCC Registration Information on page 16.)
●
This is normal as power is fluctuating with phone outpulsing.
. Is batte~ installed correctly?
●
Does battery need to be replaced?
14
.“
. ..
..:
. .
.
..
.
.
.
.. . . . .. .
..
.:..
. .
.
.. . .
..:.
TWO YEAR
LIMITED WARRANTY TELEPHONE
What does your
● warranty cavefl
Any defect in material or workmanship.
For how long after the s Two years.
original purchase?
●
The warranty for rental units begins with the first rental.
What will we do?
●
Provide you with a new, or at our option, a reconditioned unit.
“ The exchange unit is warranted for the remainder of your product’s original two-year
warranty perio~.
How do you make
● a warranty claim?
Properly pack your unit. Include any cables, etc., which were originally provided with the produ~.
We
●
●
●
●
●
●
● recommend using the original cation and packing materials.
Include in the package a copy of the sales receipt or other evidence of date of original purchase.
If the unit was a gift, provide a statement specifying the date received.
AISO Print YOUr name and address and a description of the defect.
Ship the unit standard UPS or equivalent to:
Thomson Consumer Electronics, Inc.
Product Exchange Center
32 Spur Drive
●
El Paso, Texas ~906
Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
“ A new or reconditioned unit will be shipped to you prepaid freight.
What does
your warranty not covefl
●
Customer instruction.
Your
Owner’s Manual provides information regarding operating instructions and user controls.
For additional information, ask your dealer.
Installation and set-up sewice adjustments.
Batteries.
Damage from misuse or neglect.
Product which have been modified or incorporated into other products.
Product purchased or semiced outside the USA.
How does state law relate to this warranty?
“ This warranty gives you specific legal rights, and to state.
What if you purchased
your unit in Canada?
●
Refer to the Canadian Warranty.
you may also have other rights which va~ from state
For products purchased outside the United States and Canada, see dealer for warranty.
Thomson Consumer Electronics, Inc.
SERVICE INFORMATION
FCC requires this product be serviced only by the manufacturer or its authorized sewice agents. In accordance with FCC requirements, changes or modifications not expressly approved by Thomson
Consumer Electronics could void the user’s authority to operate this product.
For instructions on how to obtain service, refer to the warranty included in this Guide or call customer service, telephone number: 800-~8-0329.
Attach your sales receipt to the booklet for future reference or jot down the date this product was purchased or received as a gift. This information will be valuable if sewice should be required during the warranty period.
Purchase date
Name of store
15
,..
,.-
.
. .
.
.:.
.
..
...
-- .:.
1.
.
::, .
-.
. .
:.-
.
.
-.
.-,
FCC REGISTRATION [FORMATION
Your GE
telephone equipment
is re
istered with the Federal Cammunicatlons compliance with pans 15 and 68, F C Ruies and Regulations.
1.
Notification
to the bcal
Telephone Company
2.
Commission and is
in
On the bottom of this eq~ipment is a label indicating among other information, the FCC Hegfstration number and
Ringer Equivalence Number (REN)
for the equipment.
YOU must, upon request, provide this information to your telephone company.
The RE~
is
useful to determine the number of devices you may connect toyOUr teiephOneline and
still
have all these devices ring when your telephone number is called.
In most (but not all) areas, the sum of the ~E~’s of all devices conneded to one line should not exceed 5. To be ceflain of the number of devices you may conned to your line as determined by the REN, YOUshould contad your local telephone company.
NOTES: This equipment may not be used on coin semice
Notice must be given to the telephone company upon your line.
provided by the telephone company.
Party lines are subjed to state tariffs, and therefore, you may not be able to equipment if you are on a party line. Check with use your own telephone your local telephone company.
permanent disconnection of your telephone from
Rights of the Te/ephofle Company
Should your equipment cause trouble on your line which may harm the teiephone nemork, the telephone company shall, where predicable, notify you that tempora~ discontinuanceof sewjce maybe required.
Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily disconttiue sewice immediately.
In ase of such tempora~ discontinuance, the telephone company must: (1) promptly notify you of such temporary d~scontinuance, (2) afford you the opportunity to corred the situation and (3) inform you of your right to bring a complalnt to the commission to procedures set forth in Subpart E of
Part M,
FCC Rules and Regulations.
pursuant
The telephone company may make changes in its communications facilities, equipment, operations of procedures where such adion is required in the operation of its business and
not
inconsistent with
FCC
Rules and Regulations.
If these changes are expected to affed the use or p.:fiomance of your telephone equipment, the telephone company must give you adequate notice, in wrltlng, to allow you to maintain uninterrupted semice.
INTERFERENCE INFORMATION
This device complies with Part 15 of the FCC
Rules.
Operation is subjed to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
T~is equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful intederence to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful intetierence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try tO correct the interference by one or more of the following measures: s Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).
●
●
Reorient or relocate and increase the separation between the telecommunications receiving antenna for radio or television that is “receiving” the lnte~erence).
equipment and
Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected.
●
Consult the dealer or an experienced radio~ technician for help.
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions.
Also, the Federal Communications Commission has prepared a helpful booklet,
“HOW To Identify and Resolve Radio~ Interference Problems”.
This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number OWOOO-003454 when ordering copies.
HEARING AID COMPATIBILITY
This telephone system meets FCC standards for
Hearing Aid Compatibility.
16
.
-1
CONTROLS and FEATURES
A.
Clock
Radio
Controls and
Features
i
Note: Radio and Alarm will flat operate if
HANDSET
is out of BASE u
●
. ..
..:
.
...”
..
..
...
. ... .
-----
-“t-
.
.... .
-.
-
.-.
. ..”....:
.. .
., .,,..>
I 1 f
n
●
●
1. Hour Button
2. Minute Button
3. Wake Set Button
4. Time Set Button
5.
Sleep Button
6.
Function Selector
● off
●
Radio On
●
●
Radio Wake
Alarm Wake
7. Snooz Bar
8. LED Indicator
●
AM
●
Wake
9, Digital Display
10. FM/AM Dial Scale
11. Volume Control
12. Tuning Wheel
13. FM/AM Band Switch
14. Radio Mute Switch
17
.
.
. ..
.:.
.
. .
.
.
.
.. ..
.
.
.,,
..’
. .
....
.. . .
CLOCK RADIO OPERATION
The GE Model 2-9710 Clock Radio Telephone provides good sound quality with its AM/FiM radio. In addition, it provides convenient alarm features, such as wake-to-radio, wake-toalarm, sleep-to-music and snooz alarm.
When AC power
is interrupted (disconnected) for a shofi period, both time and alarm settings will change (unless optional batte~ is installed). After AC power is restored
(reconnected) the DIGITAL DISPUY will blink to indicate that power was interrupted and you must readjust the TIME and
AUHM settings.
To stop display from blinking, press TIME
SET button and HOUR or MiNUTE button at the same time.
(See “NO
WORRY” BA~ERY BACKUP SYSTEM.)
Note: Radio and alarm will not operate if telephone
handset is out of cradle.
1.
Turn the FUNCTION
SELE~R
to ON.
2.
Select AM or FM broadcasts using the BAND switch.
3. Seled a station with TUNING Wheel and adjust the vOLU~~
CONTROL
to your preferred listening loudness.
4. Turn radio OFF by turning the FUN~iON
SELE~R
to OFF.
When the telephone handset is removed from the cradle, the radio’s audio is automatically muted, eliminating. the need to
manually
reduce
radio volume to carry on a conversation.
The HANDSET must be returned to the BASE for radio play and alarm system operation.
FM WITH BUILT-IN AFC
The built-in Automatic Frequency Control (AFC) works to reduce drift on FM reception and helps keep the radio locked in on the station to which it is tuned. AFC works only on FM.
:
●
●
●
●
● m
●
●
●
●
●
●
●
●
●
●
●
●
●
●
A.
Introduction
B.
power
Failure
Indicator
\
:
●
●
s
●
●
●
●
“
C.
Radio
- -,.
Operation
..-, -.-,.--+
>.--:-””
●
s -
:
●
●
●
●
● s
D.
Automatic
Radio
Muting
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
:
●
●
●
●
s
●
E.
Built-In AFC
18
.. .
AM — A Built-in ferrite rod antenna eliminates the need for an outside antenna for AM reception.
Rotating the radio slightly may improve reception for distant AM stations.
FM — The POWER
CORD acts as your FM antenna.
The
POWER
CORD picks up moderate to strong stations and eliminates the need for an external antenna in most strong signal areas, Be sure the
POWER CORD
is stretched out to its full length.
Do not coil or bunch the CORD together.
Changing position of the POWER CORD may improve reception.
Your D/GITAL CLOCK TIMER operates on a 24-hour cycle.
The AM indicator to the left of the diaital disDlav will show when the clock is. reading AM time.
“ “‘ -‘
1. Press and hold TIME SET button.
2. While holding the TIME SET button, press the HOUR and
MINUTE
buttons to change the display to the exact AM or
PM time.
For a display of time in minutes and seconds;
1. Press and hold the WAKE SET button.
2. While holding the WAKE SET button, momentarily press the SLEEP button.
●
●
The hour digits will display minutes.
The minute digits will display seconds and start to increment.
Release the
WAKE
SET button to return to the hour and minute display.
● s
●
●
●
●
●
●
●
1
F,
Antennas
● s
●
●
●
●
●
●
G.
Time Set
●
: cg?E:*m5P~z.wE:c-,.
●
.&
**
●
: s:
*:
●
●
●
●
●
:
s
●
“: 4=
~
:$
●
!
●
S*
%
●
%
&
H.
Minutes and
Seconds
Time
~ienl-mt u~aplay
—..
s 1.
●
Wake Time
To Set The Wake Time, Select the AM or PM time that
you want your radio or alarm to turn on automatically by following the~ simple steps:
1. Turn the FUNCTION
SELECTOR
to OFF position.
2.
While holding the WAKE SET button, press the HOUR and
MINUTE
buttons to change the display to your desired AM or PM wake-up time.
3. Release the
WAKE
SET button and the current time is once again displayed.
●
●
●
●
●
●
●
●
●
19
.,
. .
. . ,.
.,.
.. ~.
.:-
. .
-. .-,.
CLOCK RADIO OPERATION
Your Choice of Wake to Radio
1. Select your AM or FM station as outlined under RADIO
OPERATION.
2. Turn FUNCTION
SELEC~R
to OFF.
3. Set wake time as outlined under SET THE WAKE TIME.
4. Turn the
FUNCTION SELECTOR
to
RAD/O WAKE
position.
●
The WAKE INDICATOR in the Display will light.
The radio is now set to turn on at the time you have set, and will turn itself off after about 1 hour and 59 minutes. To turn radio off sooner, turn FUNCTION SELECTOR to OFF position.
Or Wake to Alarm
1. Set wake time as outlined under SET THE WAKE TIME.
2. Turn FUNCTION
SELECTOR
to
ALARM
WAKE position.
●
The WAKE tNDICA~R in the Display will light.
The alarm will turn on at the time you have set and will sound for about 1 hour and 59 minutes, then turn itself off. To turn alarm off sooner, turn the FUNCTION SELE~R to OFF.
NOTE: Your radio has a 24 hour timer. When FUNCTION SEL-
E~R
is left in WAKE ~ALARM
or WAKE ~ RADIO
mode, it
will turn itself on, sound for approximately 2 hours, turn itself off, and turn on again at the same time the following
day.
●
●
●
●
●
●
●
●
●
●
●
●
● c
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
J.
Wake to
Music or
Radio -
-,.-..
+
.-’.-,=”-”
-“B..,@
.
● m**t
8A*
.’
:>.
---
.
@2:
..
--,-,
&..-
..
●
0.00-0-900
M**********
SLEEP TO RAD1O
You can drift off to sleep listening to the radio with the knowledge that the radio will turn itself off automatically.
1. Turn FUNCTION SELECTOR to OFF.
2. Press and hold the SLEEP button. The display
willexhibit
SLEEP time of 0.59.
3. Press the MINUTE button to set sleep time between 59
and
O
minutes, depending on how long you wish the radio to play.
For sleep time of more that 59 minutes, up to 1 hour 59 minutes, momentarily press the HOUR button (while holding the SLEEP button). The display will exhibit 1:59. Then, press the MINUTE button to select the desired amount of sleep time in excess of 1 hour.
4. Release the SLEEP button. The current time is once again displayed.
5. The radio is now on and you can select your station in the usual way. The radio will play for the chosen length of time
(up to 1 hour and 59 minutes), and will then turn itself off. If you decide to turn the radio off before the total number of minutes have passed, just press the SNOOZ button.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
K. sleepto
the Radio
20
-----
.:.
. .
..
.
.
..
...
..
. >+
.“
.
-. .
....
.
... . .
CLOCK RADIO OPERATION
SLEEP TO RADIO AND WAKE TO RADIO OR WAKE TO ALARM
You can set your clock radio to lull you to sleep, turn itself off, then
●
●
: awaken you at a present time, all automatically. Follow the steps under :
WAKE TO RAD/O or WAKE ~ALARM, then proceed as in SLEEP ~
:
RADIO instructions, steps 2 thru 5.
●
●
The push button control for Snooz-Alam has two functions:
1. To take an extra nap after the alarm sounds or the radio comes on in the WAKE mode, simply press the SNOOZ-AURM push button to silence the radio or alarm. About 9 minutes later the radio or alarm will sound again. You can turn the unit off or use the SNOOZ-ALARM feature for up to 1 hour and 59 minutes, after which the radio or alarm will turn itself off until the next day.
2. It shuts off the SLEEP cycle (see step 5 under SLEEP TO
RADIO ).
K. sleepto
the
Radio cont.
●
:-
•~
●
●
●
:
L.
snOOZs
Alarm
.
.
‘ - ‘-’- ..
‘;----- ;-,-:;.; \
●
::::::
This radio is equipped with a memory holding system that can be powered with a customer-installed %volt battery (not included). When normal household power is interrupted, or AC line cord is unplugged, the battey willpower the radio to keep track of time and alarm settings programmed into memory. When on battery power, the digital display will not light, but the radio will play and alarm will operate. Normal operation will resume after AC power is restored so you will not have to reset time or alarm.
lnstal! batte~ as follows:
1.
Remove battery compartment door (located on bottom of radio) by applying thumb pressure to area indicated on battery door and then sliding door off cabinet.
2. Connect a 9-voit battery connedor. The power failure protetiion
circuit will
not operate unless batte~ is installed.
3. Insed batte~ in compartment and replace compartment door.
Note: Alkaline batte~, NEDA 1604A, is recommended for memoy holding time. Carbon-zinc batte~ (NEDA 1604) may
be used
but memory holding time will be substantially reduced.
Memory holding time for a fresh alkaline battery is approximately 6 hours (if radio or alarm are not operated), which should take care of short, nuisanc+type AC power failures. To presewe battery life, the radio should remain plugged into an AC outlet. As the battery gets olde~ its voltage will drop and memo~ may be lost. Be sure to replace the batte~ periodically. Battery is not included with this clock radio.
lMPO~ANT
Be
sure to
remove battery when storing the set. Battery will be drained if left conneded when set is unplugged. A leaky batte~ can badly damage the clock radio.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
:
●
●
●
●
●
●
●
●
●
M.
‘iN*Worry9*
Batiery
Backup
System
21
.-... ..
. .
.:.
,
...
----
,-..
TWO YEAR
LIMITED WARRANTY
What does your warranty
covefl
●
Any defect in material or workmanship.
For how long afier the original purchase?
+ Two years.
●
The warranty for rental
untts
begins
with
the first rental.
●
●
What wilt we do?
●
Provide you with a new, or at our option, a reconditioned unit.
.
The exchange unit is warranted for the remainder of your produd’s original one-year warranty period.
●
●
●
How do you make
a warranty claim?
Properly pack your unit. Include any cables, et~, which were originally provided with the produd.
We recommend using the original carton and packing materials.
Include in the package a copy of the sales receipt or other evidence of date of original purchase.
If the unit was a gift, provide a statement specifying the date received.
Also print your name and address and a description of the defe~.
Ship the unit standard UPS or equivalent to:
Thomson Consumer Eiedronics,
Inc.
Product Exchange Center
32 Spur Drive
El Paso, Texas ~906
Pay any charges billed to you by the Exchange Center for sewice not covered by the warranty.
A new or reconditioned unit will be shipped to you prepaid freight.
What does your warranty not covefl
●
Customer instruction.
Your @ner’s Manual provides information regarding operating instructions
● and user controls.
For additional information, ask your dealer.
Installation and set-up sewice adjustments.
●
Batteries.
.
Damage from misuse or neglect.
●
●
Products which have been modified or incorporated into other products.
Produd purchased or serviced oukide the USA.
How does state law relate to this
●
warranty?
●
This warranty gives you specific legal rights, and you may also have other state to state.
What If you pumhased your unit in Canada?
Refer to the Canadian Warranty.
rights which vary from
For produds purchased outside the United States and Canada, see dealer for warranty.
Thomson Consumer Eiectroni=, inc.
SERVICE
This produd should be sewiced only by those specially trained in appropriate sewicing techniques.
For instrudions on how to obtain service, refer to the warranty included in this Guide.
Attach your sales receipt to the booklet for future reference or jot down the date this product was purchased or received as a gift. This information will be valuable if service should be required during the warranty period.
Purchase date
~ame of store
. . . :., .
-.,
22
.
.
,
‘.
.
.
,..
.
.
.
.
..
. . .
,.
. .
.
.:.
-
...
. .. ...
.,.
:
-..
..
.
.
..
”.,
::
.
-.
. ..... .
,. :..
. ..
A
.,.
..
. . ..-
..-
,.
..
..-.
..
. . .
.
. . .
. .
..,,
-.
“.
.-
,
23
,,-
..:
. .
.
..
.
. .
.. --
-.
.,. .
.’
... .
.. .
:.
ACCESSORY ORDER FORM
Tofulfill
your communicafin~
lifestyle, a wide range
needs
und enhance your
Of
GEe.rtension
phones, main phones, cordless phones and answering systems is available.
Just
stop
by your
neurest
retailer and ask to see the wide range of
GE
telephone products.
All
are carefuily engineered to offer you high quality and dependability, modern easy-to-use features, and e[egant styling at an affordable price.
Should you wish to purchase, insist on the
GE
brand for all your communicating needs.
.:
. .
..
.,
.
. .
...
. .
.. .
ACCESSORY ORDER FORM
2-9710
CATALOG NUM8ER
5-1923
Q
DESCRIPTION
LITHIUM CARTRIDGE
LiMn02 cell, 3 volt
(CR2032) with
For Models
“MEMORY
STORE”.
PH!CE EACH
$6.70
QUANTiTY
TOTAL
For credit card purchases
Your complete charge card number, its expiration date and your signature are necessary to process all charge card orders.
Copy your complete account number from your
VISA card.
m~~~
My card expires:
Copy your complete account number from your
MasterCard.
mmmm
[
Copy the number above your name on the MasterCard
My card expires:
Authorized Signature
Prices are subject to change without notice.
Total Merchandise . . . . . . . . . . . . . .
$
Sales Tax . . . . . . . . . . . . . . . . . . . . .
$
We are required W law to collect the appropriate sales tax for each individual state,
county,
and locality to which the merchandise is
being sent.
Shipping, ~andling, and Insurance $
5.00
Total Amount Enclosed.
. . . . . . . . .
$
Use VISA or MasterCard preferably.
Money order or check must be in U.S. currency only. No COO or CASH.
All
accessories are subject to availabili~.
Where applicable, we will ship a superseding model.
Prices are
subject to change without notice. Mail order form and money order or check (in
U.S.
currency) made payable
Electronics, Inc.
to: to Thomson Consumer
Consumer Electronics
Mail Order Department
P.o.
Box 8419
Ronk,
PA 17573-8419
This is your return label. Please print clearly.
To:
Name
Address
Apt.
City
State
—
ZIP
Please make sure that this form has been filled out completely.
CUSTOMER: CUT
ALONG
O~ED LINE.~
:.
.,
..’.
.,
. .
.
.:
. .
.
---
...
.
. .
;.
.’..
..
.
:..
....
...
Model
2-971OA
349A 1585-0001 (Rev.
93-45
Printed in Malaysia
,
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Quick Dial Buttons for one-touch dialing of important numbers
- 12 Memory Locations for storing frequently called numbers
- Lithium Battery Backup for preserving memory contents during power outages
- Switchable Pulse/Tone Dialing for compatibility with various telephone services
- Clock Radio with Wake-up Alarm and Sleep Timer
- Adjustable Ringer Volume with Off Option for customized sound levels
- Redial Button for easy recall of the last dialed number
- Pause Function for temporary interruption during dialing
- Hearing Aid Compatibility for enhanced accessibility
Related manuals
Frequently Answers and Questions
How many memory locations does the GE 2-9710 Clock Radio Telephone have?
How do I store a phone number in memory?
How do I dial a stored phone number?
How do I redial the last number I called?
How do I turn the ringer off?
What is the default ringer volume?
Can I use the GE 2-9710 Clock Radio Telephone with a rotary phone service?
What kind of power does the GE 2-9710 Clock Radio Telephone use?
What kind of telephone jack do I need to use with the GE 2-9710 Clock Radio Telephone?
What is the maximum length of a phone number that I can store in memory?
advertisement
Table of contents
- 4 . . .
- 5 Features
- 8 A. Introduction
- 8 8. How to Make and Receive Calls
- 8 C. Automatic Radial
- 11 P8X use
- 11 Stored ~umber
- 16 . . . . . . . . . . . . . . .
- 18 Radio Operation
- 19 Time Set
- 19 Wake Time
- 20 Sleep to the Radio
- 21 System