User`s manual | Gear Head KP3200CW Computer Keyboard User Manual

Wireless Calculator Keypad
Model #: KP3200CW
User’s Manual
Rev. 060801
User’s Record:
To provide quality customer service and technical support, it is suggested that you keep the
following information as well as your store receipt and this user’s manual.
Date of Purchase:
Model Number:
Serial Number:
Product Rev Number (located below the UPC on the package):
Package Contents:
Your new Keypad will ship with the following items.
Wireless Calculator Keypad
USB Receiver
1 AAA Alkaline Battery
User’s Manual
Warranty Information
System Requirements:
Please be sure that you meet all of the system requirements below to avoid difficulties during installation.
IBM PCs or 100% Compatibles
Windows® ME, 2000, XP
Available USB Port
System Specifications:
Your new Keypad complies with the following specifications.
USB Interface
Special Function Keys:
Your Keypad has a set of special function keys located underneath the LCD screen. For the name and description of these keys, please see the
chart below:
Button Description
Volume Up
When your Keypad is in “Keypad” mode and media player is active, click this button to increase the volume
of your speakers.
Volume Down
When your Keypad is in “Keypad” mode and media player is active, click this button to decrease the volume
of your speakers.
Play / Pause
When your Keypad is in “Keypad” mode and media player is active, click this button to play (or pause) the
current track.
When your Keypad is in “Keypad” mode and media player is active, click this button to mute the speakers.
This key functions as the <Backspace> key on your keyboard.
Previous Track
When your Keypad is in “Keypad” mode and media player is active, click this button to go back to the
previous track on the current play list.
Next Track
When your Keypad is in “Keypad” mode and media player is active, click this button to proceed to the next
track on the current play list.
When your Keypad is in “Keypad” mode and media player is active, click this button to stop the player.
When your Keypad is in “Keypad” mode and a writing editor (e.g. Microsoft® Word) is active, click this
button to paste the numbers shown on the LCD screen into the editor.
Press this button to switch between CALC (calculator) and KEYPAD (10-keys pad) mode.
NOTE: The pictures shown in the User’s Manual are for demonstration purposes only. Your computer or product may look slightly different.
1. Remove the Battery Compartment Cover on the back of your Keypad, and install the enclosed battery into your Keypad following
the battery orientation guide in the battery bay, and then slide the cover back onto your Keypad until it securely locks.
2. Turn on your computer, and wait for it to load.
3. Plug the USB Receiver into an available USB port on your computer.
4. Turn on the power switch on the back of your Keypad •, your keypad will establish a connection with the receiver and will be ready to
be used. If a connection is not established, there might be a high level of surrounding interference, press the Connect button on the
USB Receiver ‚ , and then press the Connect button on the bottom of your Keypad ƒ.
5. Your computer will detect your Keypad, and the necessary drivers will be installed automatically.
6. Your Keypad is now ready to be used.
FCC Information:
This equipment has been tested and found to comply with limits for Class B digital device pursuant to Part 15 of Federal Communications
Commission (FCC) rules.
FCC Compliance Statement
These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to
radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by
turning the equipment off and on. The user is encouraged to try and correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected to.
The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Warranty Information:
Gear Head, LLC warrants that this product shall be free from defects in materials and workmanship for the reasonable lifetime of the product. If the
product is defective, Gear Head, LLC’s sole obligation under this warranty shall be at its election, subject to the terms of this warranty, to repair or
replace any parts deemed defective. This warranty is for the exclusive benefit of the original purchaser and is not assignable or transferable. THIS
To the fullest extent permitted by law, Gear Head, LLC expressly disclaims and excludes from this warranty any liability for damages, including but
not limited to general, special, indirect, incidental, consequential, aggravated, punitive or exemplary damages, and economic loss (even if Gear
Head™ is informed of their possibility), third party claims against you, including for any loss or damages, and claims or damages related to loss of,
or, damage to, your records or data. This warranty does not apply to any product the exterior of which has been damaged or defaced. This warranty
will be voided by misuse, improper physical environment, improper repair, acts of God, war or terror, commercial use, and improper service,
operation or handling.
Technical Support
Gear Head™ provides Technical Support Monday - Friday from 9:00 am – 5:30 pm Eastern Time. Before calling, please make sure you have
available the Model # (located on the front page of your User’s Manual) and information regarding your computer’s operating system.
Please contact our technicians at
Return Merchandise for Service
Any claim under this warranty must be made in writing to Gear Head, LLC, at the address provide by our technician, within 30 days after the owner
discovers the circumstances giving rise to any such claim, and must include a copy of this warranty document, a receipt or copy of your invoice
marked with the date of purchase, and the original packaging. You may obtain service by calling the technician for a Return Merchandise
Authorization (RMA) number. The RMA number must be prominently displayed on the outside of the shipping carton and the package must be
mailed to Gear Head™ postage prepaid.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF